omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ h2_smc91x_resources[1].start = gpio_to_irq(0);
+ h2_smc91x_resources[1].end = gpio_to_irq(0);
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
- omap_board_config = h2_config;
- omap_board_config_size = ARRAY_SIZE(h2_config);
omap_serial_init();
+ h2_i2c_board_info[0].irq = gpio_to_irq(58);
+ h2_i2c_board_info[1].irq = gpio_to_irq(2);
omap_register_i2c_bus(1, 100, h2_i2c_board_info,
ARRAY_SIZE(h2_i2c_board_info));
omap1_usb_init(&h2_usb_config);
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ smc91x_resources[1].start = gpio_to_irq(40);
+ smc91x_resources[1].end = gpio_to_irq(40);
platform_add_devices(devices, ARRAY_SIZE(devices));
+ h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
- omap_board_config = h3_config;
- omap_board_config_size = ARRAY_SIZE(h3_config);
omap_serial_init();
+ h3_i2c_board_info[1].irq = gpio_to_irq(14);
omap_register_i2c_bus(1, 100, h3_i2c_board_info,
ARRAY_SIZE(h3_i2c_board_info));
omap1_usb_init(&h3_usb_config);
printk(KERN_INFO "HTC Herald init.\n");
/* Do board initialization before we register all the devices */
- omap_board_config = htcherald_config;
- omap_board_config_size = ARRAY_SIZE(htcherald_config);
+ htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
+ htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
platform_add_devices(devices, ARRAY_SIZE(devices));
htcherald_disable_watchdog();
osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
osk_flash_resource.end += SZ_32M - 1;
+ osk5912_smc91x_resources[1].start = gpio_to_irq(0);
+ osk5912_smc91x_resources[1].end = gpio_to_irq(0);
+ osk5912_cf_resources[0].start = gpio_to_irq(62);
+ osk5912_cf_resources[0].end = gpio_to_irq(62);
platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
- omap_board_config = osk_config;
- omap_board_config_size = ARRAY_SIZE(osk_config);
l = omap_readl(USB_TRANSCEIVER_CTRL);
l |= (3 << 1);
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
- omap_board_config = palmte_config;
- omap_board_config_size = ARRAY_SIZE(palmte_config);
-
platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
+ palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
palmte_misc_gpio_setup();
omap_serial_init();
omap_mpu_wdt_mode(0);
- omap_board_config = palmtt_config;
- omap_board_config_size = ARRAY_SIZE(palmtt_config);
-
platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
+ palmtt_boardinfo[0].irq = gpio_to_irq(6);
spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
omap_serial_init();
omap1_usb_init(&palmtt_usb_config);
palmz71_gpio_setup(1);
omap_mpu_wdt_mode(0);
- omap_board_config = palmz71_config;
- omap_board_config_size = ARRAY_SIZE(palmz71_config);
-
platform_add_devices(devices, ARRAY_SIZE(devices));
+ palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
spi_register_board_info(palmz71_boardinfo,
ARRAY_SIZE(palmz71_boardinfo));
omap1_usb_init(&palmz71_usb_config);
omap_dm9000_init();
+ omap_hsmmc_init(mmc);
devkit8000_i2c_init();
+ omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ);
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
{
int r;
- r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ");
- if (r < 0) {
- printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ");
- rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0;
- }
+ omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP);
- r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
- "tsc2005 reset");
- if (r >= 0) {
- tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
- rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
- gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
- } else {
- printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
+ r = gpio_request_array(rx51_tsc2005_gpios,
+ ARRAY_SIZE(rx51_tsc2005_gpios));
+ if (r < 0) {
+ printk(KERN_ERR "tsc2005 board initialization failed\n");
tsc2005_pdata.esd_timeout_ms = 0;
+ return;
}
+
+ tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
++ rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq =
++ gpio_to_irq(RX51_TSC2005_IRQ_GPIO);
}
void __init rx51_peripherals_init(void)
gpio_set_debounce(gpio_pendown, gpio_debounce);
}
- ads7846_config.gpio_pendown = gpio_pendown;
-
spi_bi->bus_num = bus_num;
- spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown);
+ spi_bi->irq = gpio_to_irq(gpio_pendown);
- if (board_pdata)
+ if (board_pdata) {
+ board_pdata->gpio_pendown = gpio_pendown;
spi_bi->platform_data = board_pdata;
+ } else {
+ ads7846_config.gpio_pendown = gpio_pendown;
+ }
spi_register_board_info(&ads7846_spi_board_info, 1);
}
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
- #define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \
- IH_MPUIO_BASE + ((nr) & 0x0f) : \
- IH_GPIO_BASE + (nr))
-#define METHOD_MPUIO 0
-#define METHOD_GPIO_1510 1
-#define METHOD_GPIO_1610 2
-#define METHOD_GPIO_7XX 3
-#define METHOD_GPIO_24XX 5
-#define METHOD_GPIO_44XX 6
--
struct omap_gpio_dev_attr {
int bank_width; /* GPIO bank width */
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
static void __exit ams_delta_serio_exit(void)
{
serio_unregister_port(ams_delta_serio);
- free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
+ free_irq(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
- gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
- gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
+ gpio_free_array(ams_delta_gpios,
+ ARRAY_SIZE(ams_delta_gpios));
}
module_exit(ams_delta_serio_exit);
projects / mirror_ubuntu-disco-kernel.git / commitdiff