return ocr;
}
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11)
{
struct mmc_command cmd = {0};
int err = 0;
* Send CMD11 only if the request is to switch the card to
* 1.8V signalling.
*/
- if (signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
+ if ((signal_voltage != MMC_SIGNAL_VOLTAGE_330) && cmd11) {
cmd.opcode = SD_SWITCH_VOLTAGE;
cmd.arg = 0;
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
void mmc_set_bus_width_ddr(struct mmc_host *host, unsigned int width,
unsigned int ddr);
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage,
+ bool cmd11);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
*/
if (!mmc_host_is_spi(host) && rocr &&
((*rocr & 0x41000000) == 0x41000000)) {
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, true);
if (err) {
ocr &= ~SD_OCR_S18R;
goto try_again;
WARN_ON(!host->claimed);
/* Make sure we are at 3.3V signalling voltage */
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330, false);
if (err)
return err;