# default numbering is unsatisfactory. The drive aliases will be
# created as symbolic links in /dev/disk/by-vdev.
#
-# The only currently supported topologies are sas_direct and
-# sas_switch. A multipath mode is supported in which dm-mpath
-# devices are handled by examining the first-listed running
-# component disk. In multipath mode the configuration file
-# should contain a channel definition with the same name for
-# each path to a given enclosure.
-
+# The currently supported topologies are sas_direct and sas_switch.
+# A multipath mode is supported in which dm-mpath devices are
+# handled by examining the first-listed running component disk. In
+# multipath mode the configuration file should contain a channel
+# definition with the same name for each path to a given enclosure.
+#
+# The alias keyword provides a simple way to map already-existing
+# device symlinks to more convenient names. It is suitable for
+# small, static configurations or for sites that have some automated
+# way to generate the mapping file.
+#
#
# Some example configuration files are given below.
# channel 86:00.0 1 A
# channel 86:00.0 0 B
+# #
+# # Example vdev_id.conf - alias
+# #
+#
+# # by-vdev
+# # name fully qualified or base name of device link
+# alias d1 /dev/disk/by-id/wwn-0x5000c5002de3b9ca
+# alias d2 wwn-0x5000c5002def789e
+
PATH=/bin:/sbin:/usr/bin:/usr/sbin
CONFIG=/etc/zfs/vdev_id.conf
PHYS_PER_PORT=
DEV=
-SLOT_MAP=
-CHANNEL_MAP=
MULTIPATH=
TOPOLOGY=
printf "%s" ${MAPPED_CHAN}
}
-while getopts 'c:s:d:g:mp:h' OPTION; do
+sas_handler() {
+ if [ -z "$PHYS_PER_PORT" ] ; then
+ PHYS_PER_PORT=`awk "/^phys_per_port /{print \\$2;exit}" $CONFIG`
+ fi
+ PHYS_PER_PORT=${PHYS_PER_PORT:-4}
+ if ! echo $PHYS_PER_PORT | grep -q -E '^[0-9]+$' ; then
+ echo "Error: phys_per_port value $PHYS_PER_PORT is non-numeric"
+ exit 1
+ fi
+
+ if [ -z "$MULTIPATH_MODE" ] ; then
+ MULTIPATH_MODE=`awk "/^multipath /{print \\$2; exit}" $CONFIG`
+ fi
+
+ # Use first running component device if we're handling a dm-mpath device
+ if [ "$MULTIPATH_MODE" = "yes" ] ; then
+ # If udev didn't tell us the UUID via DM_NAME, check /dev/mapper
+ if [ -z "$DM_NAME" ] ; then
+ DM_NAME=`ls -l --full-time /dev/mapper |
+ awk "/\/$DEV$/{print \\$9}"`
+ fi
+
+ # For raw disks udev exports DEVTYPE=partition when
+ # handling partitions, and the rules can be written to
+ # take advantage of this to append a -part suffix. For
+ # dm devices we get DEVTYPE=disk even for partitions so
+ # we have to append the -part suffix directly in the
+ # helper.
+ if [ "$DEVTYPE" != "partition" ] ; then
+ PART=`echo $DM_NAME | awk -Fp '/p/{print "-part"$2}'`
+ fi
+
+ # Strip off partition information.
+ DM_NAME=`echo $DM_NAME | sed 's/p[0-9][0-9]*$//'`
+ if [ -z "$DM_NAME" ] ; then
+ return
+ fi
+
+ # Get the raw scsi device name from multipath -l.
+ DEV=`multipath -l $DM_NAME |awk '/running/{print $3 ; exit}'`
+ if [ -z "$DEV" ] ; then
+ return
+ fi
+ fi
+
+ if echo $DEV | grep -q ^/devices/ ; then
+ sys_path=$DEV
+ else
+ sys_path=`udevadm info -q path -p /sys/block/$DEV 2>/dev/null`
+ fi
+
+ # Use positional parameters as an ad-hoc array
+ set -- $(echo "$sys_path" | tr / ' ')
+ num_dirs=$#
+ scsi_host_dir="/sys"
+
+ # Get path up to /sys/.../hostX
+ i=1
+ while [ $i -le $num_dirs ] ; do
+ d=$(eval echo \${$i})
+ scsi_host_dir="$scsi_host_dir/$d"
+ echo $d | grep -q -E '^host[0-9]+$' && break
+ i=$(($i + 1))
+ done
+
+ if [ $i = $num_dirs ] ; then
+ return
+ fi
+
+ PCI_ID=$(eval echo \${$(($i -1))} | awk -F: '{print $2":"$3}')
+
+ # In sas_switch mode, the directory four levels beneath
+ # /sys/.../hostX contains symlinks to phy devices that reveal
+ # the switch port number. In sas_direct mode, the phy links one
+ # directory down reveal the HBA port.
+ port_dir=$scsi_host_dir
+ case $TOPOLOGY in
+ "sas_switch") j=$(($i + 4)) ;;
+ "sas_direct") j=$(($i + 1)) ;;
+ esac
+
+ i=$(($i + 1))
+ while [ $i -le $j ] ; do
+ port_dir="$port_dir/$(eval echo \${$i})"
+ i=$(($i + 1))
+ done
+
+ PHY=`ls -d $port_dir/phy* 2>/dev/null | head -1 | awk -F: '{print $NF}'`
+ if [ -z "$PHY" ] ; then
+ return
+ fi
+ PORT=$(( $PHY / $PHYS_PER_PORT ))
+
+ # Look in /sys/.../sas_device/end_device-X for the bay_identifier
+ # attribute.
+ end_device_dir=$port_dir
+ while [ $i -lt $num_dirs ] ; do
+ d=$(eval echo \${$i})
+ end_device_dir="$end_device_dir/$d"
+ if echo $d | grep -q '^end_device' ; then
+ end_device_dir="$end_device_dir/sas_device/$d"
+ break
+ fi
+ i=$(($i + 1))
+ done
+
+ SLOT=`cat $end_device_dir/bay_identifier 2>/dev/null`
+ if [ -z "$SLOT" ] ; then
+ return
+ fi
+
+ SLOT=`map_slot $SLOT`
+ CHAN=`map_channel $PCI_ID $PORT`
+ if [ -z "$CHAN" ] ; then
+ return
+ fi
+ echo ${CHAN}${SLOT}${PART}
+}
+
+alias_handler () {
+ # Special handling is needed to correctly append a -part suffix
+ # to partitions of device mapper devices. The DEVTYPE attribute
+ # is normally set to "disk" instead of "partition" in this case,
+ # so the udev rules won't handle that for us as they do for
+ # "plain" block devices.
+ #
+ # For example, we may have the following links for a device and its
+ # partitions,
+ #
+ # /dev/disk/by-id/dm-name-isw_dibgbfcije_ARRAY0 -> ../../dm-0
+ # /dev/disk/by-id/dm-name-isw_dibgbfcije_ARRAY0p1 -> ../../dm-1
+ # /dev/disk/by-id/dm-name-isw_dibgbfcije_ARRAY0p2 -> ../../dm-3
+ #
+ # and the following alias in vdev_id.conf.
+ #
+ # alias A0 dm-name-isw_dibgbfcije_ARRAY0
+ #
+ # The desired outcome is for the following links to be created
+ # without having explicitly defined aliases for the partitions.
+ #
+ # /dev/disk/by-vdev/A0 -> ../../dm-0
+ # /dev/disk/by-vdev/A0-part1 -> ../../dm-1
+ # /dev/disk/by-vdev/A0-part2 -> ../../dm-3
+ #
+ # Warning: The following grep pattern will misidentify whole-disk
+ # devices whose names end with 'p' followed by a string of
+ # digits as partitions, causing alias creation to fail. This
+ # ambiguity seems unavoidable, so devices using this facility
+ # must not use such names.
+ local DM_PART=
+ if echo $DM_NAME | grep -q -E 'p[0-9][0-9]*$' ; then
+ if [ "$DEVTYPE" != "partition" ] ; then
+ DM_PART=`echo $DM_NAME | awk -Fp '/p/{print "-part"$2}'`
+ fi
+ fi
+
+ # DEVLINKS attribute must have been populated by already-run udev rules.
+ for link in $DEVLINKS ; do
+ # Remove partition information to match key of top-level device.
+ if [ -n "$DM_PART" ] ; then
+ link=`echo $link | sed 's/p[0-9][0-9]*$//'`
+ fi
+ # Check both the fully qualified and the base name of link.
+ for l in $link `basename $link` ; do
+ alias=`awk "/^alias / && \\$3 == \"${l}\" \
+ { print \\$2; exit }" $CONFIG`
+ if [ -n "$alias" ] ; then
+ echo ${alias}${DM_PART}
+ return
+ fi
+ done
+ done
+}
+
+while getopts 'c:d:g:mp:h' OPTION; do
case ${OPTION} in
c)
- CONFIG=`readlink -e ${OPTARG}`
- ;;
+ CONFIG=${OPTARG}
+ ;;
d)
- DEV=${OPTARG}
- ;;
+ DEV=${OPTARG}
+ ;;
g)
TOPOLOGY=$OPTARG
;;
m)
MULTIPATH_MODE=yes
;;
- s)
- SLOT_MAP=`readlink -e ${OPTARG}`
- if [ ! -r $SLOT_MAP ] ; then
- echo "Error: $SLOT_MAP is nonexistant or unreadable"
- exit 1
- fi
- ;;
h)
usage
;;
if [ -z "$TOPOLOGY" ] ; then
TOPOLOGY=`awk "/^topology /{print \\$2; exit}" $CONFIG`
fi
-TOPOLOGY=${TOPOLOGY:-sas_direct}
-case $TOPOLOGY in
- sas_direct|sas_switch)
- ;;
- *)
- echo "Error: unknown topology $TOPOLOGY"
- exit 1
- ;;
-esac
-
-if [ -z "$PHYS_PER_PORT" ] ; then
- PHYS_PER_PORT=`awk "/^phys_per_port /{print \\$2; exit}" $CONFIG`
-fi
-PHYS_PER_PORT=${PHYS_PER_PORT:-4}
-if ! echo $PHYS_PER_PORT | grep -q -E '^[0-9]+$' ; then
- echo "Error: phys_per_port value $PHYS_PER_PORT is non-numeric"
- exit 1
-fi
-
-if [ -z "$MULTIPATH_MODE" ] ; then
- MULTIPATH_MODE=`awk "/^multipath /{print \\$2; exit}" $CONFIG`
-fi
-
-# Use first running component device if we're handling a dm-mpath device.
-if [ "$MULTIPATH_MODE" = "yes" ] ; then
- # If udev didn't tell us the UUID via DM_NAME, find it in /dev/mapper
- if [ -z "$DM_NAME" ] ; then
- DM_NAME=`ls -l --full-time /dev/mapper |
- awk "/\/$DEV$/{print \\$9}"`
- fi
-
- # For raw disks udev exports DEVTYPE=partition when handling partitions,
- # and the rules can be written to take advantage of this to append a
- # -part suffix. For dm devices we get DEVTYPE=disk even for partitions
- # so we have to append the -part suffix directly in the helper.
- if [ "$DEVTYPE" != "partition" ] ; then
- PART=`echo $DM_NAME | awk -Fp '/p/{print "-part"$2}'`
- fi
-
- # Strip off partition information.
- DM_NAME=`echo $DM_NAME | sed 's/p[0-9][0-9]*$//'`
- if [ -z "$DM_NAME" ] ; then
- exit 0
- fi
-
- # Get the raw scsi device name from multipath -l.
- DEV=`multipath -l $DM_NAME |awk '/running/{print $3 ; exit}'`
- if [ -z "$DEV" ] ; then
- exit 0
- fi
-fi
-
-if echo $DEV | grep -q ^/devices/ ; then
- sys_path=$DEV
-else
- sys_path=`udevadm info -q path -p /sys/block/$DEV 2>/dev/null`
-fi
-
-# Use positional parameters as an ad-hoc array
-set -- $(echo "$sys_path" | tr / ' ')
-num_dirs=$#
-scsi_host_dir="/sys"
-
-# Get path up to /sys/.../hostX
-i=1
-while [ $i -le $num_dirs ] ; do
- d=$(eval echo \${$i})
- scsi_host_dir="$scsi_host_dir/$d"
- echo $d | grep -q -E '^host[0-9]+$' && break
- i=$(($i + 1))
-done
-
-if [ $i = $num_dirs ] ; then
- exit 0
-fi
-
-PCI_ID=$(eval echo \${$(($i -1))} | awk -F: '{print $2":"$3}')
-
-# In sas_switch mode, the directory four levels beneath /sys/.../hostX
-# contains symlinks to phy devices that reveal the switch port number. In
-# sas_direct mode, the phy links one directory down reveal the HBA port.
-port_dir=$scsi_host_dir
-case $TOPOLOGY in
- "sas_switch") j=$(($i + 4)) ;;
- "sas_direct") j=$(($i + 1)) ;;
-esac
-i=$(($i + 1))
-while [ $i -le $j ] ; do
- port_dir="$port_dir/$(eval echo \${$i})"
- i=$(($i + 1))
-done
+# First check if an alias was defined for this device.
+ID_VDEV=`alias_handler`
-PHY=`ls -d $port_dir/phy* 2>/dev/null | head -1 | awk -F: '{print $NF}'`
-if [ -z "$PHY" ] ; then
- exit 0
-fi
-PORT=$(( $PHY / $PHYS_PER_PORT ))
-
-# Look in /sys/.../sas_device/end_device-X for the bay_identifier
-# attribute.
-end_device_dir=$port_dir
-while [ $i -lt $num_dirs ] ; do
- d=$(eval echo \${$i})
- end_device_dir="$end_device_dir/$d"
- if echo $d | grep -q '^end_device' ; then
- end_device_dir="$end_device_dir/sas_device/$d"
- break
- fi
- i=$(($i + 1))
-done
-
-SLOT=`cat $end_device_dir/bay_identifier 2>/dev/null`
-if [ -z "$SLOT" ] ; then
- exit 0
+if [ -z "$ID_VDEV" ] ; then
+ TOPOLOGY=${TOPOLOGY:-sas_direct}
+ case $TOPOLOGY in
+ sas_direct|sas_switch)
+ ID_VDEV=`sas_handler`
+ ;;
+ *)
+ echo "Error: unknown topology $TOPOLOGY"
+ exit 1
+ ;;
+ esac
fi
-SLOT=`map_slot $SLOT`
-CHAN=`map_channel $PCI_ID $PORT`
-if [ -z "$CHAN" ] ; then
- exit 0
+if [ -n "$ID_VDEV" ] ; then
+ echo "ID_VDEV=${ID_VDEV}"
+ echo "ID_VDEV_PATH=disk/by-vdev/${ID_VDEV}"
fi
-ID_VDEV=${CHAN}${SLOT}${PART}
-
-echo "ID_VDEV=${ID_VDEV}"
-echo "ID_VDEV_PATH=disk/by-vdev/${ID_VDEV}"
projects / mirror_zfs-debian.git / commitdiff