config GENERIC_ISA_DMA
def_bool ISA
+config PCI
+ bool "PCI support"
+ depends on M54xx
+ help
+ Enable the PCI bus. Support for the PCI bus hardware built into the
+ ColdFire 547x and 548x processors.
+
source "drivers/pci/Kconfig"
source "drivers/zorro/Kconfig"
config COLDFIRE
bool "Coldfire CPU family support"
select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_HAVE_CUSTOM_GPIO_H
select CPU_HAS_NO_BITFIELDS
select CPU_HAS_NO_MULDIV64
help
Motorola ColdFire 5249 processor support.
+config M525x
+ bool "MCF525x"
+ depends on !MMU
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Freescale (Motorola) Coldfire 5251/5253 processor support.
+
config M527x
bool
help
Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
+config M5441x
+ bool "MCF5441x"
+ depends on !MMU
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_CB
+ help
+ Freescale Coldfire 54410/54415/54416/54417/54418 processor support.
+
endif # COLDFIRE
cpuflags-$(CONFIG_M68020) :=
cpuflags-$(CONFIG_M68360) := -m68332
cpuflags-$(CONFIG_M68000) := -m68000
+cpuflags-$(CONFIG_M5441x) := $(call cc-option,-mcpu=54455,-mcfv4e)
cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
cpuflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cpuflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cpuflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
+cpuflags-$(CONFIG_M525x) := $(call cc-option,-mcpu=5253,-m5200)
cpuflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cpuflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cpuflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
#define DCACHE_MAX_ADDR 0
#define DCACHE_SETMASK 0
#endif
+#ifndef CACHE_MODE
+#define CACHE_MODE 0
+#define CACR_ICINVA 0
+#define CACR_DCINVA 0
+#define CACR_BCINVA 0
+#endif
+
+/*
+ * ColdFire architecture has no way to clear individual cache lines, so we
+ * are stuck invalidating all the cache entries when we want a clear operation.
+ */
+static inline void clear_cf_icache(unsigned long start, unsigned long end)
+{
+ __asm__ __volatile__ (
+ "movec %0,%%cacr\n\t"
+ "nop"
+ :
+ : "r" (CACHE_MODE | CACR_ICINVA | CACR_BCINVA));
+}
+
+static inline void clear_cf_dcache(unsigned long start, unsigned long end)
+{
+ __asm__ __volatile__ (
+ "movec %0,%%cacr\n\t"
+ "nop"
+ :
+ : "r" (CACHE_MODE | CACR_DCINVA));
+}
+static inline void clear_cf_bcache(unsigned long start, unsigned long end)
+{
+ __asm__ __volatile__ (
+ "movec %0,%%cacr\n\t"
+ "nop"
+ :
+ : "r" (CACHE_MODE | CACR_ICINVA | CACR_BCINVA | CACR_DCINVA));
+}
+
+/*
+ * Use the ColdFire cpushl instruction to push (and invalidate) cache lines.
+ * The start and end addresses are cache line numbers not memory addresses.
+ */
static inline void flush_cf_icache(unsigned long start, unsigned long end)
{
unsigned long set;
* Set number of channels of DMA on ColdFire for different implementations.
*/
#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
- defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+ defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
+ defined(CONFIG_M528x) || defined(CONFIG_M525x)
+
#define MAX_M68K_DMA_CHANNELS 4
#elif defined(CONFIG_M5272)
#define MAX_M68K_DMA_CHANNELS 1
extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
extern void free_dma(unsigned int dmanr); /* release it again */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
#define isa_dma_bridge_buggy (0)
+#endif
#endif /* _M68K_DMA_H */
#define coldfire_gpio_h
#include <linux/io.h>
-#include <asm-generic/gpio.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-
-/*
- * The Freescale Coldfire family is quite varied in how they implement GPIO.
- * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
- * only one port, others have multiple ports; some have a single data latch
- * for both input and output, others have a separate pin data register to read
- * input; some require a read-modify-write access to change an output, others
- * have set and clear registers for some of the outputs; Some have all the
- * GPIOs in a single control area, others have some GPIOs implemented in
- * different modules.
- *
- * This implementation attempts accommodate the differences while presenting
- * a generic interface that will optimize to as few instructions as possible.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
- defined(CONFIG_M532x) || defined(CONFIG_M54xx)
-
-/* These parts have GPIO organized by 8 bit ports */
-
-#define MCFGPIO_PORTTYPE u8
-#define MCFGPIO_PORTSIZE 8
-#define mcfgpio_read(port) __raw_readb(port)
-#define mcfgpio_write(data, port) __raw_writeb(data, port)
-
-#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
-
-/* These parts have GPIO organized by 16 bit ports */
-
-#define MCFGPIO_PORTTYPE u16
-#define MCFGPIO_PORTSIZE 16
-#define mcfgpio_read(port) __raw_readw(port)
-#define mcfgpio_write(data, port) __raw_writew(data, port)
-
-#elif defined(CONFIG_M5249)
-
-/* These parts have GPIO organized by 32 bit ports */
-
-#define MCFGPIO_PORTTYPE u32
-#define MCFGPIO_PORTSIZE 32
-#define mcfgpio_read(port) __raw_readl(port)
-#define mcfgpio_write(data, port) __raw_writel(data, port)
-
-#endif
-
-#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE))
-#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE)
-
-#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
-/*
- * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
- * read-modify-write to change an output and a GPIO module which has separate
- * set/clr registers to directly change outputs with a single write access.
- */
-#if defined(CONFIG_M528x)
-/*
- * The 528x also has GPIOs in other modules (GPT, QADC) which use
- * read-modify-write as well as those controlled by the EPORT and GPIO modules.
- */
-#define MCFGPIO_SCR_START 40
-#else
-#define MCFGPIO_SCR_START 8
-#endif
-
-#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \
- mcfgpio_port(gpio - MCFGPIO_SCR_START))
-
-#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \
- mcfgpio_port(gpio - MCFGPIO_SCR_START))
-#else
-
-#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX
-/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
-#define MCFGPIO_SETR_PORT(gpio) 0
-#define MCFGPIO_CLRR_PORT(gpio) 0
-
-#endif
-/*
- * Coldfire specific helper functions
- */
-
-/* return the port pin data register for a gpio */
-static inline u32 __mcf_gpio_ppdr(unsigned gpio)
-{
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M5307) || defined(CONFIG_M5407)
- return MCFSIM_PADAT;
-#elif defined(CONFIG_M5272)
- if (gpio < 16)
- return MCFSIM_PADAT;
- else if (gpio < 32)
- return MCFSIM_PBDAT;
- else
- return MCFSIM_PCDAT;
-#elif defined(CONFIG_M5249)
- if (gpio < 32)
- return MCFSIM2_GPIOREAD;
- else
- return MCFSIM2_GPIO1READ;
-#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
- if (gpio < 8)
- return MCFEPORT_EPPDR;
-#if defined(CONFIG_M528x)
- else if (gpio < 16)
- return MCFGPTA_GPTPORT;
- else if (gpio < 24)
- return MCFGPTB_GPTPORT;
- else if (gpio < 32)
- return MCFQADC_PORTQA;
- else if (gpio < 40)
- return MCFQADC_PORTQB;
-#endif
- else
- return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
-#else
- return 0;
-#endif
-}
-
-/* return the port output data register for a gpio */
-static inline u32 __mcf_gpio_podr(unsigned gpio)
-{
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M5307) || defined(CONFIG_M5407)
- return MCFSIM_PADAT;
-#elif defined(CONFIG_M5272)
- if (gpio < 16)
- return MCFSIM_PADAT;
- else if (gpio < 32)
- return MCFSIM_PBDAT;
- else
- return MCFSIM_PCDAT;
-#elif defined(CONFIG_M5249)
- if (gpio < 32)
- return MCFSIM2_GPIOWRITE;
- else
- return MCFSIM2_GPIO1WRITE;
-#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
- defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
- if (gpio < 8)
- return MCFEPORT_EPDR;
-#if defined(CONFIG_M528x)
- else if (gpio < 16)
- return MCFGPTA_GPTPORT;
- else if (gpio < 24)
- return MCFGPTB_GPTPORT;
- else if (gpio < 32)
- return MCFQADC_PORTQA;
- else if (gpio < 40)
- return MCFQADC_PORTQB;
-#endif
- else
- return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
-#else
- return 0;
-#endif
-}
-
+#include <asm/mcfgpio.h>
/*
* The Generic GPIO functions
*
static inline int gpio_get_value(unsigned gpio)
{
if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
- return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+ return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
else
return __gpio_get_value(gpio);
}
MCFGPIO_PORTTYPE data;
local_irq_save(flags);
- data = mcfgpio_read(__mcf_gpio_podr(gpio));
+ data = mcfgpio_read(__mcfgpio_podr(gpio));
if (value)
data |= mcfgpio_bit(gpio);
else
data &= ~mcfgpio_bit(gpio);
- mcfgpio_write(data, __mcf_gpio_podr(gpio));
+ mcfgpio_write(data, __mcfgpio_podr(gpio));
local_irq_restore(flags);
} else {
if (value)
static inline int gpio_to_irq(unsigned gpio)
{
- return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE
- : __gpio_to_irq(gpio);
+#if defined(MCFGPIO_IRQ_MIN)
+ if ((gpio >= MCFGPIO_IRQ_MIN) && (gpio < MCFGPIO_IRQ_MAX))
+#else
+ if (gpio < MCFGPIO_IRQ_MAX)
+#endif
+ return gpio + MCFGPIO_IRQ_VECBASE;
+ else
+ return __gpio_to_irq(gpio);
}
static inline int irq_to_gpio(unsigned irq)
-#ifdef CONFIG_ISA
+#if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE)
+
+#define HAVE_ARCH_PIO_SIZE
+#define PIO_OFFSET 0
+#define PIO_MASK 0xffff
+#define PIO_RESERVED 0x10000
+
+u8 mcf_pci_inb(u32 addr);
+u16 mcf_pci_inw(u32 addr);
+u32 mcf_pci_inl(u32 addr);
+void mcf_pci_insb(u32 addr, u8 *buf, u32 len);
+void mcf_pci_insw(u32 addr, u16 *buf, u32 len);
+void mcf_pci_insl(u32 addr, u32 *buf, u32 len);
+
+void mcf_pci_outb(u8 v, u32 addr);
+void mcf_pci_outw(u16 v, u32 addr);
+void mcf_pci_outl(u32 v, u32 addr);
+void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len);
+void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len);
+void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len);
+
+#define inb mcf_pci_inb
+#define inb_p mcf_pci_inb
+#define inw mcf_pci_inw
+#define inw_p mcf_pci_inw
+#define inl mcf_pci_inl
+#define inl_p mcf_pci_inl
+#define insb mcf_pci_insb
+#define insw mcf_pci_insw
+#define insl mcf_pci_insl
+
+#define outb mcf_pci_outb
+#define outb_p mcf_pci_outb
+#define outw mcf_pci_outw
+#define outw_p mcf_pci_outw
+#define outl mcf_pci_outl
+#define outl_p mcf_pci_outl
+#define outsb mcf_pci_outsb
+#define outsw mcf_pci_outsw
+#define outsl mcf_pci_outsl
+
+#define readb(addr) in_8(addr)
+#define writeb(v, addr) out_8((addr), (v))
+#define readw(addr) in_le16(addr)
+#define writew(v, addr) out_le16((addr), (v))
+
+#elif defined(CONFIG_ISA)
#if MULTI_ISA == 0
#undef MULTI_ISA
*/
#define xlate_dev_kmem_ptr(p) p
+#define ioport_map(port, nr) ((void __iomem *)(port))
+
#endif /* _IO_H */
#define MCFINTC1_SIMR (0)
#define MCFINTC1_CIMR (0)
#define MCFINTC1_ICR0 (0)
+#define MCFINTC2_SIMR (0)
+#define MCFINTC2_CIMR (0)
+#define MCFINTC2_ICR0 (0)
#define MCFINT_VECBASE 64
#define MCFINT_UART0 26 /* Interrupt number for UART0 */
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
+#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
/*
* SDRAM configuration registers.
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
+/*
+ * Power Management.
+ */
+#define MCFPM_WCR 0xfc040013
+#define MCFPM_PPMSR0 0xfc04002c
+#define MCFPM_PPMCR0 0xfc04002d
+#define MCFPM_PPMHR0 0xfc040030
+#define MCFPM_PPMLR0 0xfc040034
+#define MCFPM_LPCR 0xfc0a0007
+
/****************************************************************************/
#endif /* m520xsim_h */
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
+#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
/*
* SDRAM configuration registers.
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m525xsim.h -- ColdFire 525x System Integration Module support.
+ *
+ * (C) Copyright 2012, Steven king <sfking@fdwdc.com>
+ * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m525xsim_h
+#define m525xsim_h
+/****************************************************************************/
+
+#define CPU_NAME "COLDFIRE(m525x)"
+#define CPU_INSTR_PER_JIFFY 3
+#define MCF_BUSCLK (MCF_CLK / 2)
+
+#include <asm/m52xxacr.h>
+
+/*
+ * The 525x has a second MBAR region, define its address.
+ */
+#define MCF_MBAR2 0x80000000
+
+/*
+ * Define the 525x SIM register set addresses.
+ */
+#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */
+#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/
+#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */
+#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */
+
+#define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */
+#define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */
+#define MCFSIM_DMR0 (MCF_MBAR + 0x10c) /* DRAM 0 Mask */
+
+/*
+ * Secondary Interrupt Controller (in MBAR2)
+*/
+#define MCFINTC2_INTBASE (MCF_MBAR2 + 0x168) /* Base Vector Reg */
+#define MCFINTC2_INTPRI1 (MCF_MBAR2 + 0x140) /* 0-7 priority */
+#define MCFINTC2_INTPRI2 (MCF_MBAR2 + 0x144) /* 8-15 priority */
+#define MCFINTC2_INTPRI3 (MCF_MBAR2 + 0x148) /* 16-23 priority */
+#define MCFINTC2_INTPRI4 (MCF_MBAR2 + 0x14c) /* 24-31 priority */
+#define MCFINTC2_INTPRI5 (MCF_MBAR2 + 0x150) /* 32-39 priority */
+#define MCFINTC2_INTPRI6 (MCF_MBAR2 + 0x154) /* 40-47 priority */
+#define MCFINTC2_INTPRI7 (MCF_MBAR2 + 0x158) /* 48-55 priority */
+#define MCFINTC2_INTPRI8 (MCF_MBAR2 + 0x15c) /* 56-63 priority */
+
+#define MCFINTC2_INTPRI_REG(i) (MCFINTC2_INTPRI1 + \
+ ((((i) - MCFINTC2_VECBASE) / 8) * 4))
+#define MCFINTC2_INTPRI_BITS(b, i) ((b) << (((i) % 8) * 4))
+
+/*
+ * Timer module.
+ */
+#define MCFTIMER_BASE1 (MCF_MBAR + 0x140) /* Base of TIMER1 */
+#define MCFTIMER_BASE2 (MCF_MBAR + 0x180) /* Base of TIMER2 */
+
+/*
+ * UART module.
+ */
+#define MCFUART_BASE0 (MCF_MBAR + 0x1c0) /* Base address UART0 */
+#define MCFUART_BASE1 (MCF_MBAR + 0x200) /* Base address UART1 */
+
+/*
+ * QSPI module.
+ */
+#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */
+#define MCFQSPI_SIZE 0x40 /* Register set size */
+
+
+#define MCFQSPI_CS0 15
+#define MCFQSPI_CS1 16
+#define MCFQSPI_CS2 24
+#define MCFQSPI_CS3 28
+
+/*
+ * I2C module.
+ */
+#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base addreess I2C0 */
+#define MCFI2C_SIZE0 0x20 /* Register set size */
+
+#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */
+#define MCFI2C_SIZE1 0x20 /* Register set size */
+/*
+ * DMA unit base addresses.
+ */
+#define MCFDMA_BASE0 (MCF_MBAR + 0x300) /* Base address DMA 0 */
+#define MCFDMA_BASE1 (MCF_MBAR + 0x340) /* Base address DMA 1 */
+#define MCFDMA_BASE2 (MCF_MBAR + 0x380) /* Base address DMA 2 */
+#define MCFDMA_BASE3 (MCF_MBAR + 0x3C0) /* Base address DMA 3 */
+
+/*
+ * Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */
+#define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */
+#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */
+#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */
+#define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */
+
+/*
+ * Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */
+#define MCF_IRQ_I2C0 29
+#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
+#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
+
+#define MCF_IRQ_UART0 73 /* UART0 */
+#define MCF_IRQ_UART1 74 /* UART1 */
+
+/*
+ * Define the base interrupt for the second interrupt controller.
+ * We set it to 128, out of the way of the base interrupts, and plenty
+ * of room for its 64 interrupts.
+ */
+#define MCFINTC2_VECBASE 128
+
+#define MCF_IRQ_GPIO0 (MCFINTC2_VECBASE + 32)
+#define MCF_IRQ_GPIO1 (MCFINTC2_VECBASE + 33)
+#define MCF_IRQ_GPIO2 (MCFINTC2_VECBASE + 34)
+#define MCF_IRQ_GPIO3 (MCFINTC2_VECBASE + 35)
+#define MCF_IRQ_GPIO4 (MCFINTC2_VECBASE + 36)
+#define MCF_IRQ_GPIO5 (MCFINTC2_VECBASE + 37)
+#define MCF_IRQ_GPIO6 (MCFINTC2_VECBASE + 38)
+
+#define MCF_IRQ_USBWUP (MCFINTC2_VECBASE + 40)
+#define MCF_IRQ_I2C1 (MCFINTC2_VECBASE + 62)
+
+/*
+ * General purpose IO registers (in MBAR2).
+ */
+#define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */
+#define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */
+#define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */
+#define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */
+#define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */
+#define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */
+#define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */
+#define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */
+
+#define MCFSIM2_GPIOINTSTAT (MCF_MBAR2 + 0xc0) /* GPIO intr status */
+#define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */
+#define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX 64
+#define MCFGPIO_IRQ_MAX 7
+#define MCFGPIO_IRQ_VECBASE MCF_IRQ_GPIO0
+
+/****************************************************************************/
+#endif /* m525xsim_h */
#define MCF_IRQ_FECENTC1 (MCFINT2_VECBASE + MCFINT2_FECENTC1)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
+#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
/*
* SDRAM configuration registers.
#define MCF_IRQ_FECENTC0 (MCFINT_VECBASE + MCFINT_FECENTC0)
#define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI)
-
+#define MCF_IRQ_PIT1 (MCFINT_VECBASE + MCFINT_PIT1)
/*
* SDRAM configuration registers.
*/
#define MCFINTC1_SIMR 0xFC04C01C
#define MCFINTC1_CIMR 0xFC04C01D
#define MCFINTC1_ICR0 0xFC04C040
+#define MCFINTC2_SIMR (0)
+#define MCFINTC2_CIMR (0)
+#define MCFINTC2_ICR0 (0)
#define MCFSIM_ICR_TIMER1 (0xFC048040+32)
#define MCFSIM_ICR_TIMER2 (0xFC048040+33)
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
+
+/*
+ * Power Management
+ */
+#define MCFPM_WCR 0xfc040013
+#define MCFPM_PPMSR0 0xfc04002c
+#define MCFPM_PPMCR0 0xfc04002d
+#define MCFPM_PPMSR1 0xfc04002e
+#define MCFPM_PPMCR1 0xfc04002f
+#define MCFPM_PPMHR0 0xfc040030
+#define MCFPM_PPMLR0 0xfc040034
+#define MCFPM_PPMHR1 0xfc040038
+#define MCFPM_LPCR 0xec090007
+
/*********************************************************************
*
* Inter-IC (I2C) Module
--- /dev/null
+/*
+ * m5441xsim.h -- Coldfire 5441x register definitions
+ *
+ * (C) Copyright 2012, Steven King <sfking@fdwdc.com>
+*/
+
+#ifndef m5441xsim_h
+#define m5441xsim_h
+
+#define CPU_NAME "COLDFIRE(m5441x)"
+#define CPU_INSTR_PER_JIFFY 2
+#define MCF_BUSCLK (MCF_CLK / 2)
+
+#include <asm/m54xxacr.h>
+
+/*
+ * Reset Controller Module.
+ */
+
+#define MCF_RCR 0xec090000
+#define MCF_RSR 0xec090001
+
+#define MCF_RCR_SWRESET 0x80 /* Software reset bit */
+#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
+
+/*
+ * Interrupt Controller Modules.
+ */
+/* the 5441x have 3 interrupt controllers, each control 64 interrupts */
+#define MCFINT_VECBASE 64
+#define MCFINT0_VECBASE MCFINT_VECBASE
+#define MCFINT1_VECBASE (MCFINT0_VECBASE + 64)
+#define MCFINT2_VECBASE (MCFINT1_VECBASE + 64)
+
+/* interrupt controller 0 */
+#define MCFINTC0_SIMR 0xfc04801c
+#define MCFINTC0_CIMR 0xfc04801d
+#define MCFINTC0_ICR0 0xfc048040
+/* interrupt controller 1 */
+#define MCFINTC1_SIMR 0xfc04c01c
+#define MCFINTC1_CIMR 0xfc04c01d
+#define MCFINTC1_ICR0 0xfc04c040
+/* interrupt controller 2 */
+#define MCFINTC2_SIMR 0xfc05001c
+#define MCFINTC2_CIMR 0xfc05001d
+#define MCFINTC2_ICR0 0xfc050040
+
+/* on interrupt controller 0 */
+#define MCFINT0_EPORT0 1
+#define MCFINT0_UART0 26
+#define MCFINT0_UART1 27
+#define MCFINT0_UART2 28
+#define MCFINT0_UART3 29
+#define MCFINT0_I2C0 30
+#define MCFINT0_DSPI0 31
+
+#define MCFINT0_TIMER0 32
+#define MCFINT0_TIMER1 33
+#define MCFINT0_TIMER2 34
+#define MCFINT0_TIMER3 35
+
+#define MCFINT0_FECRX0 36
+#define MCFINT0_FECTX0 40
+#define MCFINT0_FECENTC0 42
+
+#define MCFINT0_FECRX1 49
+#define MCFINT0_FECTX1 53
+#define MCFINT0_FECENTC1 55
+
+/* on interrupt controller 1 */
+#define MCFINT1_UART4 48
+#define MCFINT1_UART5 49
+#define MCFINT1_UART6 50
+#define MCFINT1_UART7 51
+#define MCFINT1_UART8 52
+#define MCFINT1_UART9 53
+#define MCFINT1_DSPI1 54
+#define MCFINT1_DSPI2 55
+#define MCFINT1_DSPI3 56
+#define MCFINT1_I2C1 57
+#define MCFINT1_I2C2 58
+#define MCFINT1_I2C3 59
+#define MCFINT1_I2C4 60
+#define MCFINT1_I2C5 61
+
+/* on interrupt controller 2 */
+#define MCFINT2_PIT0 13
+#define MCFINT2_PIT1 14
+#define MCFINT2_PIT2 15
+#define MCFINT2_PIT3 16
+#define MCFINT2_RTC 26
+
+/*
+ * PIT timer module.
+ */
+#define MCFPIT_BASE0 0xFC080000 /* Base address of TIMER0 */
+#define MCFPIT_BASE1 0xFC084000 /* Base address of TIMER1 */
+#define MCFPIT_BASE2 0xFC088000 /* Base address of TIMER2 */
+#define MCFPIT_BASE3 0xFC08C000 /* Base address of TIMER3 */
+
+
+#define MCF_IRQ_PIT1 (MCFINT2_VECBASE + MCFINT2_PIT1)
+
+/*
+ * Power Management
+ */
+#define MCFPM_WCR 0xfc040013
+#define MCFPM_PPMSR0 0xfc04002c
+#define MCFPM_PPMCR0 0xfc04002d
+#define MCFPM_PPMSR1 0xfc04002e
+#define MCFPM_PPMCR1 0xfc04002f
+#define MCFPM_PPMHR0 0xfc040030
+#define MCFPM_PPMLR0 0xfc040034
+#define MCFPM_PPMHR1 0xfc040038
+#define MCFPM_PPMLR1 0xfc04003c
+#define MCFPM_LPCR 0xec090007
+/*
+ * UART module.
+ */
+#define MCFUART_BASE0 0xfc060000 /* Base address of UART0 */
+#define MCFUART_BASE1 0xfc064000 /* Base address of UART1 */
+#define MCFUART_BASE2 0xfc068000 /* Base address of UART2 */
+#define MCFUART_BASE3 0xfc06c000 /* Base address of UART3 */
+#define MCFUART_BASE4 0xec060000 /* Base address of UART4 */
+#define MCFUART_BASE5 0xec064000 /* Base address of UART5 */
+#define MCFUART_BASE6 0xec068000 /* Base address of UART6 */
+#define MCFUART_BASE7 0xec06c000 /* Base address of UART7 */
+#define MCFUART_BASE8 0xec070000 /* Base address of UART8 */
+#define MCFUART_BASE9 0xec074000 /* Base address of UART9 */
+
+#define MCF_IRQ_UART0 (MCFINT0_VECBASE + MCFINT0_UART0)
+#define MCF_IRQ_UART1 (MCFINT0_VECBASE + MCFINT0_UART1)
+#define MCF_IRQ_UART2 (MCFINT0_VECBASE + MCFINT0_UART2)
+#define MCF_IRQ_UART3 (MCFINT0_VECBASE + MCFINT0_UART3)
+#define MCF_IRQ_UART4 (MCFINT1_VECBASE + MCFINT1_UART4)
+#define MCF_IRQ_UART5 (MCFINT1_VECBASE + MCFINT1_UART5)
+#define MCF_IRQ_UART6 (MCFINT1_VECBASE + MCFINT1_UART6)
+#define MCF_IRQ_UART7 (MCFINT1_VECBASE + MCFINT1_UART7)
+#define MCF_IRQ_UART8 (MCFINT1_VECBASE + MCFINT1_UART8)
+#define MCF_IRQ_UART9 (MCFINT1_VECBASE + MCFINT1_UART9)
+/*
+ * FEC modules.
+ */
+#define MCFFEC_BASE0 0xfc0d4000
+#define MCFFEC_SIZE0 0x800
+#define MCF_IRQ_FECRX0 (MCFINT0_VECBASE + MCFINT0_FECRX0)
+#define MCF_IRQ_FECTX0 (MCFINT0_VECBASE + MCFINT0_FECTX0)
+#define MCF_IRQ_FECENTC0 (MCFINT0_VECBASE + MCFINT0_FECENTC0)
+
+#define MCFFEC_BASE1 0xfc0d8000
+#define MCFFEC_SIZE1 0x800
+#define MCF_IRQ_FECRX1 (MCFINT0_VECBASE + MCFINT0_FECRX1)
+#define MCF_IRQ_FECTX1 (MCFINT0_VECBASE + MCFINT0_FECTX1)
+#define MCF_IRQ_FECENTC1 (MCFINT0_VECBASE + MCFINT0_FECENTC1)
+/*
+ * I2C modules.
+ */
+#define MCFI2C_BASE0 0xfc058000
+#define MCFI2C_SIZE0 0x20
+#define MCFI2C_BASE1 0xfc038000
+#define MCFI2C_SIZE1 0x20
+#define MCFI2C_BASE2 0xec010000
+#define MCFI2C_SIZE2 0x20
+#define MCFI2C_BASE3 0xec014000
+#define MCFI2C_SIZE3 0x20
+#define MCFI2C_BASE4 0xec018000
+#define MCFI2C_SIZE4 0x20
+#define MCFI2C_BASE5 0xec01c000
+#define MCFI2C_SIZE5 0x20
+
+#define MCF_IRQ_I2C0 (MCFINT0_VECBASE + MCFINT0_I2C0)
+#define MCF_IRQ_I2C1 (MCFINT1_VECBASE + MCFINT1_I2C1)
+#define MCF_IRQ_I2C2 (MCFINT1_VECBASE + MCFINT1_I2C2)
+#define MCF_IRQ_I2C3 (MCFINT1_VECBASE + MCFINT1_I2C3)
+#define MCF_IRQ_I2C4 (MCFINT1_VECBASE + MCFINT1_I2C4)
+#define MCF_IRQ_I2C5 (MCFINT1_VECBASE + MCFINT1_I2C5)
+/*
+ * EPORT Module.
+ */
+#define MCFEPORT_EPPAR 0xfc090000
+#define MCFEPORT_EPIER 0xfc090003
+#define MCFEPORT_EPFR 0xfc090006
+/*
+ * RTC Module.
+ */
+#define MCFRTC_BASE 0xfc0a8000
+#define MCFRTC_SIZE (0xfc0a8840 - 0xfc0a8000)
+#define MCF_IRQ_RTC (MCFINT2_VECBASE + MCFINT2_RTC)
+
+/*
+ * GPIO Module.
+ */
+#define MCFGPIO_PODR_A 0xec094000
+#define MCFGPIO_PODR_B 0xec094001
+#define MCFGPIO_PODR_C 0xec094002
+#define MCFGPIO_PODR_D 0xec094003
+#define MCFGPIO_PODR_E 0xec094004
+#define MCFGPIO_PODR_F 0xec094005
+#define MCFGPIO_PODR_G 0xec094006
+#define MCFGPIO_PODR_H 0xec094007
+#define MCFGPIO_PODR_I 0xec094008
+#define MCFGPIO_PODR_J 0xec094009
+#define MCFGPIO_PODR_K 0xec09400a
+
+#define MCFGPIO_PDDR_A 0xec09400c
+#define MCFGPIO_PDDR_B 0xec09400d
+#define MCFGPIO_PDDR_C 0xec09400e
+#define MCFGPIO_PDDR_D 0xec09400f
+#define MCFGPIO_PDDR_E 0xec094010
+#define MCFGPIO_PDDR_F 0xec094011
+#define MCFGPIO_PDDR_G 0xec094012
+#define MCFGPIO_PDDR_H 0xec094013
+#define MCFGPIO_PDDR_I 0xec094014
+#define MCFGPIO_PDDR_J 0xec094015
+#define MCFGPIO_PDDR_K 0xec094016
+
+#define MCFGPIO_PPDSDR_A 0xec094018
+#define MCFGPIO_PPDSDR_B 0xec094019
+#define MCFGPIO_PPDSDR_C 0xec09401a
+#define MCFGPIO_PPDSDR_D 0xec09401b
+#define MCFGPIO_PPDSDR_E 0xec09401c
+#define MCFGPIO_PPDSDR_F 0xec09401d
+#define MCFGPIO_PPDSDR_G 0xec09401e
+#define MCFGPIO_PPDSDR_H 0xec09401f
+#define MCFGPIO_PPDSDR_I 0xec094020
+#define MCFGPIO_PPDSDR_J 0xec094021
+#define MCFGPIO_PPDSDR_K 0xec094022
+
+#define MCFGPIO_PCLRR_A 0xec094024
+#define MCFGPIO_PCLRR_B 0xec094025
+#define MCFGPIO_PCLRR_C 0xec094026
+#define MCFGPIO_PCLRR_D 0xec094027
+#define MCFGPIO_PCLRR_E 0xec094028
+#define MCFGPIO_PCLRR_F 0xec094029
+#define MCFGPIO_PCLRR_G 0xec09402a
+#define MCFGPIO_PCLRR_H 0xec09402b
+#define MCFGPIO_PCLRR_I 0xec09402c
+#define MCFGPIO_PCLRR_J 0xec09402d
+#define MCFGPIO_PCLRR_K 0xec09402e
+
+#define MCFGPIO_PAR_FBCTL 0xec094048
+#define MCFGPIO_PAR_BE 0xec094049
+#define MCFGPIO_PAR_CS 0xec09404a
+#define MCFGPIO_PAR_CANI2C 0xec09404b
+#define MCFGPIO_PAR_IRQ0H 0xec09404c
+#define MCFGPIO_PAR_IRQ0L 0xec09404d
+#define MCFGPIO_PAR_DSPIOWH 0xec09404e
+#define MCFGPIO_PAR_DSPIOWL 0xec09404f
+#define MCFGPIO_PAR_TIMER 0xec094050
+#define MCFGPIO_PAR_UART2 0xec094051
+#define MCFGPIO_PAR_UART1 0xec094052
+#define MCFGPIO_PAR_UART0 0xec094053
+#define MCFGPIO_PAR_SDHCH 0xec094054
+#define MCFGPIO_PAR_SDHCL 0xec094055
+#define MCFGPIO_PAR_SIMP0H 0xec094056
+#define MCFGPIO_PAR_SIMP0L 0xec094057
+#define MCFGPIO_PAR_SSI0H 0xec094058
+#define MCFGPIO_PAR_SSI0L 0xec094059
+#define MCFGPIO_PAR_DEBUGH1 0xec09405a
+#define MCFGPIO_PAR_DEBUGH0 0xec09405b
+#define MCFGPIO_PAR_DEBUGl 0xec09405c
+#define MCFGPIO_PAR_FEC 0xec09405e
+
+/* generalization for generic gpio support */
+#define MCFGPIO_PODR MCFGPIO_PODR_A
+#define MCFGPIO_PDDR MCFGPIO_PDDR_A
+#define MCFGPIO_PPDR MCFGPIO_PPDSDR_A
+#define MCFGPIO_SETR MCFGPIO_PPDSDR_A
+#define MCFGPIO_CLRR MCFGPIO_PCLRR_A
+
+#define MCFGPIO_IRQ_MIN 17
+#define MCFGPIO_IRQ_MAX 24
+#define MCFGPIO_IRQ_VECBASE (MCFINT_VECBASE - MCFGPIO_IRQ_MIN)
+#define MCFGPIO_PIN_MAX 87
+
+#endif /* m5441xsim_h */
#define ICACHE_SIZE 0x8000 /* instruction - 32k */
#define DCACHE_SIZE 0x8000 /* data - 32k */
+#elif defined(CONFIG_M5441x)
+
+#define ICACHE_SIZE 0x2000 /* instruction - 8k */
+#define DCACHE_SIZE 0x2000 /* data - 8k */
#endif
#define CACHE_LINE_SIZE 0x0010 /* 16 bytes */
--- /dev/null
+/****************************************************************************/
+
+/*
+ * m54xxpci.h -- ColdFire 547x and 548x PCI bus support
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/****************************************************************************/
+#ifndef M54XXPCI_H
+#define M54XXPCI_H
+/****************************************************************************/
+
+/*
+ * The core set of PCI support registers are mapped into the MBAR region.
+ */
+#define PCIIDR (CONFIG_MBAR + 0xb00) /* PCI device/vendor ID */
+#define PCISCR (CONFIG_MBAR + 0xb04) /* PCI status/command */
+#define PCICCRIR (CONFIG_MBAR + 0xb08) /* PCI class/revision */
+#define PCICR1 (CONFIG_MBAR + 0xb0c) /* PCI configuration 1 */
+#define PCIBAR0 (CONFIG_MBAR + 0xb10) /* PCI base address 0 */
+#define PCIBAR1 (CONFIG_MBAR + 0xb14) /* PCI base address 1 */
+#define PCICCPR (CONFIG_MBAR + 0xb28) /* PCI cardbus CIS pointer */
+#define PCISID (CONFIG_MBAR + 0xb2c) /* PCI subsystem IDs */
+#define PCIERBAR (CONFIG_MBAR + 0xb30) /* PCI expansion ROM */
+#define PCICPR (CONFIG_MBAR + 0xb34) /* PCI capabilities pointer */
+#define PCICR2 (CONFIG_MBAR + 0xb3c) /* PCI configuration 2 */
+
+#define PCIGSCR (CONFIG_MBAR + 0xb60) /* Global status/control */
+#define PCITBATR0 (CONFIG_MBAR + 0xb64) /* Target base translation 0 */
+#define PCITBATR1 (CONFIG_MBAR + 0xb68) /* Target base translation 1 */
+#define PCITCR (CONFIG_MBAR + 0xb6c) /* Target control */
+#define PCIIW0BTAR (CONFIG_MBAR + 0xb70) /* Initiator window 0 */
+#define PCIIW1BTAR (CONFIG_MBAR + 0xb74) /* Initiator window 1 */
+#define PCIIW2BTAR (CONFIG_MBAR + 0xb78) /* Initiator window 2 */
+#define PCIIWCR (CONFIG_MBAR + 0xb80) /* Initiator window config */
+#define PCIICR (CONFIG_MBAR + 0xb84) /* Initiator control */
+#define PCIISR (CONFIG_MBAR + 0xb88) /* Initiator status */
+#define PCICAR (CONFIG_MBAR + 0xbf8) /* Configuration address */
+
+#define PCITPSR (CONFIG_MBAR + 0x8400) /* TX packet size */
+#define PCITSAR (CONFIG_MBAR + 0x8404) /* TX start address */
+#define PCITTCR (CONFIG_MBAR + 0x8408) /* TX transaction control */
+#define PCITER (CONFIG_MBAR + 0x840c) /* TX enables */
+#define PCITNAR (CONFIG_MBAR + 0x8410) /* TX next address */
+#define PCITLWR (CONFIG_MBAR + 0x8414) /* TX last word */
+#define PCITDCR (CONFIG_MBAR + 0x8418) /* TX done counts */
+#define PCITSR (CONFIG_MBAR + 0x841c) /* TX status */
+#define PCITFDR (CONFIG_MBAR + 0x8440) /* TX FIFO data */
+#define PCITFSR (CONFIG_MBAR + 0x8444) /* TX FIFO status */
+#define PCITFCR (CONFIG_MBAR + 0x8448) /* TX FIFO control */
+#define PCITFAR (CONFIG_MBAR + 0x844c) /* TX FIFO alarm */
+#define PCITFRPR (CONFIG_MBAR + 0x8450) /* TX FIFO read pointer */
+#define PCITFWPR (CONFIG_MBAR + 0x8454) /* TX FIFO write pointer */
+
+#define PCIRPSR (CONFIG_MBAR + 0x8480) /* RX packet size */
+#define PCIRSAR (CONFIG_MBAR + 0x8484) /* RX start address */
+#define PCIRTCR (CONFIG_MBAR + 0x8488) /* RX transaction control */
+#define PCIRER (CONFIG_MBAR + 0x848c) /* RX enables */
+#define PCIRNAR (CONFIG_MBAR + 0x8490) /* RX next address */
+#define PCIRDCR (CONFIG_MBAR + 0x8498) /* RX done counts */
+#define PCIRSR (CONFIG_MBAR + 0x849c) /* RX status */
+#define PCIRFDR (CONFIG_MBAR + 0x84c0) /* RX FIFO data */
+#define PCIRFSR (CONFIG_MBAR + 0x84c4) /* RX FIFO status */
+#define PCIRFCR (CONFIG_MBAR + 0x84c8) /* RX FIFO control */
+#define PCIRFAR (CONFIG_MBAR + 0x84cc) /* RX FIFO alarm */
+#define PCIRFRPR (CONFIG_MBAR + 0x84d0) /* RX FIFO read pointer */
+#define PCIRFWPR (CONFIG_MBAR + 0x84d4) /* RX FIFO write pointer */
+
+#define PACR (CONFIG_MBAR + 0xc00) /* PCI arbiter control */
+#define PASR (COFNIG_MBAR + 0xc04) /* PCI arbiter status */
+
+/*
+ * Definitions for the Global status and control register.
+ */
+#define PCIGSCR_PE 0x20000000 /* Parity error detected */
+#define PCIGSCR_SE 0x10000000 /* System error detected */
+#define PCIGSCR_XCLKBIN 0x07000000 /* XLB2CLKIN mask */
+#define PCIGSCR_PEE 0x00002000 /* Parity error intr enable */
+#define PCIGSCR_SEE 0x00001000 /* System error intr enable */
+#define PCIGSCR_RESET 0x00000001 /* Reset bit */
+
+/*
+ * Bit definitions for the PCICAR configuration address register.
+ */
+#define PCICAR_E 0x80000000 /* Enable config space */
+#define PCICAR_BUSN 16 /* Move bus bits */
+#define PCICAR_DEVFNN 8 /* Move devfn bits */
+#define PCICAR_DWORDN 0 /* Move dword bits */
+
+/*
+ * The initiator windows hold the memory and IO mapping information.
+ * This macro creates the register values from the desired addresses.
+ */
+#define WXBTAR(hostaddr, pciaddr, size) \
+ (((hostaddr) & 0xff000000) | \
+ ((((size) - 1) & 0xff000000) >> 8) | \
+ (((pciaddr) & 0xff000000) >> 16))
+
+#define PCIIWCR_W0_MEM 0x00000000 /* Window 0 is memory */
+#define PCIIWCR_W0_IO 0x08000000 /* Window 0 is IO */
+#define PCIIWCR_W0_MRD 0x00000000 /* Window 0 memory read */
+#define PCIIWCR_W0_MRDL 0x02000000 /* Window 0 memory read line */
+#define PCIIWCR_W0_MRDM 0x04000000 /* Window 0 memory read mult */
+#define PCIIWCR_W0_E 0x01000000 /* Window 0 enable */
+
+#define PCIIWCR_W1_MEM 0x00000000 /* Window 0 is memory */
+#define PCIIWCR_W1_IO 0x00080000 /* Window 0 is IO */
+#define PCIIWCR_W1_MRD 0x00000000 /* Window 0 memory read */
+#define PCIIWCR_W1_MRDL 0x00020000 /* Window 0 memory read line */
+#define PCIIWCR_W1_MRDM 0x00040000 /* Window 0 memory read mult */
+#define PCIIWCR_W1_E 0x00010000 /* Window 0 enable */
+
+/*
+ * Bit definitions for the PCIBATR registers.
+ */
+#define PCITBATR0_E 0x00000001 /* Enable window 0 */
+#define PCITBATR1_E 0x00000001 /* Enable window 1 */
+
+/*
+ * PCI arbiter support definitions and macros.
+ */
+#define PACR_INTMPRI 0x00000001
+#define PACR_EXTMPRI(x) (((x) & 0x1f) << 1)
+#define PACR_INTMINTE 0x00010000
+#define PACR_EXTMINTE(x) (((x) & 0x1f) << 17)
+#define PACR_PKMD 0x40000000
+#define PACR_DS 0x80000000
+
+#define PCICR1_CL(x) ((x) & 0xf) /* Cacheline size field */
+#define PCICR1_LT(x) (((x) & 0xff) << 8) /* Latency timer field */
+
+/****************************************************************************/
+#endif /* M54XXPCI_H */
#define MCF_PAR_PSC_RTS_RTS (0x30)
#define MCF_PAR_PSC_CANRX (0x40)
+#define MCF_PAR_PCIBG (CONFIG_MBAR + 0xa48) /* PCI bus grant */
+#define MCF_PAR_PCIBR (CONFIG_MBAR + 0xa4a) /* PCI */
+
#endif /* m54xxsim_h */
--- /dev/null
+/*
+ * mcfclk.h -- coldfire specific clock structure
+ */
+
+
+#ifndef mcfclk_h
+#define mcfclk_h
+
+struct clk;
+
+#ifdef MCFPM_PPMCR0
+struct clk_ops {
+ void (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+};
+
+struct clk {
+ const char *name;
+ struct clk_ops *clk_ops;
+ unsigned long rate;
+ unsigned long enabled;
+ u8 slot;
+};
+
+extern struct clk *mcf_clks[];
+extern struct clk_ops clk_ops0;
+#ifdef MCFPM_PPMCR1
+extern struct clk_ops clk_ops1;
+#endif /* MCFPM_PPMCR1 */
+
+#define DEFINE_CLK(clk_bank, clk_name, clk_slot, clk_rate) \
+static struct clk __clk_##clk_bank##_##clk_slot = { \
+ .name = clk_name, \
+ .clk_ops = &clk_ops##clk_bank, \
+ .rate = clk_rate, \
+ .slot = clk_slot, \
+}
+
+void __clk_init_enabled(struct clk *);
+void __clk_init_disabled(struct clk *);
+#endif /* MCFPM_PPMCR0 */
+
+#endif /* mcfclk_h */
#ifndef mcfgpio_h
#define mcfgpio_h
-#include <linux/io.h>
+#ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h>
+#else
+
+int __mcfgpio_get_value(unsigned gpio);
+void __mcfgpio_set_value(unsigned gpio, int value);
+int __mcfgpio_direction_input(unsigned gpio);
+int __mcfgpio_direction_output(unsigned gpio, int value);
+int __mcfgpio_request(unsigned gpio);
+void __mcfgpio_free(unsigned gpio);
+
+/* our alternate 'gpiolib' functions */
+static inline int __gpio_get_value(unsigned gpio)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return __mcfgpio_get_value(gpio);
+ else
+ return -EINVAL;
+}
+
+static inline void __gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ __mcfgpio_set_value(gpio, value);
+}
+
+static inline int __gpio_cansleep(unsigned gpio)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return 0;
+ else
+ return -EINVAL;
+}
+
+static inline int __gpio_to_irq(unsigned gpio)
+{
+ return -EINVAL;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return __mcfgpio_direction_input(gpio);
+ else
+ return -EINVAL;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return __mcfgpio_direction_output(gpio, value);
+ else
+ return -EINVAL;
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ return __mcfgpio_request(gpio);
+ else
+ return -EINVAL;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ if (gpio < MCFGPIO_PIN_MAX)
+ __mcfgpio_free(gpio);
+}
+
+#endif /* CONFIG_GPIOLIB */
-struct mcf_gpio_chip {
- struct gpio_chip gpio_chip;
- void __iomem *pddr;
- void __iomem *podr;
- void __iomem *ppdr;
- void __iomem *setr;
- void __iomem *clrr;
- const u8 *gpio_to_pinmux;
-};
-
-extern struct mcf_gpio_chip mcf_gpio_chips[];
-extern unsigned int mcf_gpio_chips_size;
-
-int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
-int mcf_gpio_get_value(struct gpio_chip *, unsigned);
-int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
-void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
-void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
-int mcf_gpio_request(struct gpio_chip *, unsigned);
-void mcf_gpio_free(struct gpio_chip *, unsigned);
/*
- * Define macros to ease the pain of setting up the GPIO tables. There
- * are two cases we need to deal with here, they cover all currently
- * available ColdFire GPIO hardware. There are of course minor differences
- * in the layout and number of bits in each ColdFire part, but the macros
- * take all that in.
+ * The Freescale Coldfire family is quite varied in how they implement GPIO.
+ * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
+ * only one port, others have multiple ports; some have a single data latch
+ * for both input and output, others have a separate pin data register to read
+ * input; some require a read-modify-write access to change an output, others
+ * have set and clear registers for some of the outputs; Some have all the
+ * GPIOs in a single control area, others have some GPIOs implemented in
+ * different modules.
*
- * Firstly is the conventional GPIO registers where we toggle individual
- * bits in a register, preserving the other bits in the register. For
- * lack of a better term I have called this the slow method.
+ * This implementation attempts accommodate the differences while presenting
+ * a generic interface that will optimize to as few instructions as possible.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M532x) || defined(CONFIG_M54xx) || \
+ defined(CONFIG_M5441x)
+
+/* These parts have GPIO organized by 8 bit ports */
+
+#define MCFGPIO_PORTTYPE u8
+#define MCFGPIO_PORTSIZE 8
+#define mcfgpio_read(port) __raw_readb(port)
+#define mcfgpio_write(data, port) __raw_writeb(data, port)
+
+#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
+
+/* These parts have GPIO organized by 16 bit ports */
+
+#define MCFGPIO_PORTTYPE u16
+#define MCFGPIO_PORTSIZE 16
+#define mcfgpio_read(port) __raw_readw(port)
+#define mcfgpio_write(data, port) __raw_writew(data, port)
+
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
+
+/* These parts have GPIO organized by 32 bit ports */
+
+#define MCFGPIO_PORTTYPE u32
+#define MCFGPIO_PORTSIZE 32
+#define mcfgpio_read(port) __raw_readl(port)
+#define mcfgpio_write(data, port) __raw_writel(data, port)
+
+#endif
+
+#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE))
+#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE)
+
+#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M532x) || defined(CONFIG_M5441x)
+/*
+ * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
+ * read-modify-write to change an output and a GPIO module which has separate
+ * set/clr registers to directly change outputs with a single write access.
+ */
+#if defined(CONFIG_M528x)
+/*
+ * The 528x also has GPIOs in other modules (GPT, QADC) which use
+ * read-modify-write as well as those controlled by the EPORT and GPIO modules.
*/
-#define MCFGPS(mlabel, mbase, mngpio, mpddr, mpodr, mppdr) \
- { \
- .gpio_chip = { \
- .label = #mlabel, \
- .request = mcf_gpio_request, \
- .free = mcf_gpio_free, \
- .direction_input = mcf_gpio_direction_input, \
- .direction_output = mcf_gpio_direction_output,\
- .get = mcf_gpio_get_value, \
- .set = mcf_gpio_set_value, \
- .base = mbase, \
- .ngpio = mngpio, \
- }, \
- .pddr = (void __iomem *) mpddr, \
- .podr = (void __iomem *) mpodr, \
- .ppdr = (void __iomem *) mppdr, \
- }
+#define MCFGPIO_SCR_START 40
+#elif defined(CONFIGM5441x)
+/* The m5441x EPORT doesn't have its own GPIO port, uses PORT C */
+#define MCFGPIO_SCR_START 0
+#else
+#define MCFGPIO_SCR_START 8
+#endif
+#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \
+ mcfgpio_port(gpio - MCFGPIO_SCR_START))
+
+#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \
+ mcfgpio_port(gpio - MCFGPIO_SCR_START))
+#else
+
+#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX
+/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
+#define MCFGPIO_SETR_PORT(gpio) 0
+#define MCFGPIO_CLRR_PORT(gpio) 0
+
+#endif
/*
- * Secondly is the faster case, where we have set and clear registers
- * that allow us to set or clear a bit with a single write, not having
- * to worry about preserving other bits.
+ * Coldfire specific helper functions
*/
-#define MCFGPF(mlabel, mbase, mngpio) \
- { \
- .gpio_chip = { \
- .label = #mlabel, \
- .request = mcf_gpio_request, \
- .free = mcf_gpio_free, \
- .direction_input = mcf_gpio_direction_input, \
- .direction_output = mcf_gpio_direction_output,\
- .get = mcf_gpio_get_value, \
- .set = mcf_gpio_set_value_fast, \
- .base = mbase, \
- .ngpio = mngpio, \
- }, \
- .pddr = (void __iomem *) MCFGPIO_PDDR_##mlabel, \
- .podr = (void __iomem *) MCFGPIO_PODR_##mlabel, \
- .ppdr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \
- .setr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \
- .clrr = (void __iomem *) MCFGPIO_PCLRR_##mlabel, \
- }
+/* return the port pin data register for a gpio */
+static inline u32 __mcfgpio_ppdr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADAT;
+ else if (gpio < 32)
+ return MCFSIM_PBDAT;
+ else
+ return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
+ if (gpio < 32)
+ return MCFSIM2_GPIOREAD;
+ else
+ return MCFSIM2_GPIO1READ;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M532x) || defined(CONFIG_M5441x)
+#if !defined(CONFIG_M5441x)
+ if (gpio < 8)
+ return MCFEPORT_EPPDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTPORT;
+ else if (gpio < 24)
+ return MCFGPTB_GPTPORT;
+ else if (gpio < 32)
+ return MCFQADC_PORTQA;
+ else if (gpio < 40)
+ return MCFQADC_PORTQB;
+#endif /* defined(CONFIG_M528x) */
+ else
+#endif /* !defined(CONFIG_M5441x) */
+ return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
#endif
+}
+
+/* return the port output data register for a gpio */
+static inline u32 __mcfgpio_podr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADAT;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADAT;
+ else if (gpio < 32)
+ return MCFSIM_PBDAT;
+ else
+ return MCFSIM_PCDAT;
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
+ if (gpio < 32)
+ return MCFSIM2_GPIOWRITE;
+ else
+ return MCFSIM2_GPIO1WRITE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M532x) || defined(CONFIG_M5441x)
+#if !defined(CONFIG_M5441x)
+ if (gpio < 8)
+ return MCFEPORT_EPDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTPORT;
+ else if (gpio < 24)
+ return MCFGPTB_GPTPORT;
+ else if (gpio < 32)
+ return MCFQADC_PORTQA;
+ else if (gpio < 40)
+ return MCFQADC_PORTQB;
+#endif /* defined(CONFIG_M528x) */
+ else
+#endif /* !defined(CONFIG_M5441x) */
+ return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
+#endif
+}
+
+/* return the port direction data register for a gpio */
+static inline u32 __mcfgpio_pddr(unsigned gpio)
+{
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
+ return MCFSIM_PADDR;
+#elif defined(CONFIG_M5272)
+ if (gpio < 16)
+ return MCFSIM_PADDR;
+ else if (gpio < 32)
+ return MCFSIM_PBDDR;
+ else
+ return MCFSIM_PCDDR;
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
+ if (gpio < 32)
+ return MCFSIM2_GPIOENABLE;
+ else
+ return MCFSIM2_GPIO1ENABLE;
+#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M532x) || defined(CONFIG_M5441x)
+#if !defined(CONFIG_M5441x)
+ if (gpio < 8)
+ return MCFEPORT_EPDDR;
+#if defined(CONFIG_M528x)
+ else if (gpio < 16)
+ return MCFGPTA_GPTDDR;
+ else if (gpio < 24)
+ return MCFGPTB_GPTDDR;
+ else if (gpio < 32)
+ return MCFQADC_DDRQA;
+ else if (gpio < 40)
+ return MCFQADC_DDRQB;
+#endif /* defined(CONFIG_M528x) */
+ else
+#endif /* !defined(CONFIG_M5441x) */
+ return MCFGPIO_PDDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
+#else
+ return 0;
+#endif
+}
+
+#endif /* mcfgpio_h */
#elif defined(CONFIG_M5249)
#include <asm/m5249sim.h>
#include <asm/mcfintc.h>
+#elif defined(CONFIG_M525x)
+#include <asm/m525xsim.h>
+#include <asm/mcfintc.h>
#elif defined(CONFIG_M527x)
#include <asm/m527xsim.h>
#elif defined(CONFIG_M5272)
#include <asm/mcfintc.h>
#elif defined(CONFIG_M54xx)
#include <asm/m54xxsim.h>
+#elif defined(CONFIG_M5441x)
+#include <asm/m5441xsim.h>
#endif
/****************************************************************************/
#define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */
#define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */
#define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */
-#if defined(CONFIG_M532x)
+#if defined(CONFIG_M532x) || defined(CONFIG_M5441x)
#define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */
#else
#define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */
#define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */
#endif
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M5249) || defined(CONFIG_M5307) || \
- defined(CONFIG_M5407)
+ defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
#define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */
#endif
#define MCFUART_UIPR 0x34 /* Input Port (r) */
#define _ASM_M68K_PCI_H
#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
/* The PCI address space does equal the physical memory
* address space. The networking and block device layers use
*/
#define PCI_DMA_BUS_IS_PHYS (1)
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x00000100
+#define PCIBIOS_MIN_MEM 0x02000000
+
#endif /* _ASM_M68K_PCI_H */
+++ /dev/null
-/*
- * Coldfire generic GPIO pinmux support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef pinmux_h
-#define pinmux_h
-
-#define MCFPINMUX_NONE -1
-
-extern int mcf_pinmux_request(unsigned, unsigned);
-extern void mcf_pinmux_release(unsigned, unsigned);
-
-static inline int mcf_pinmux_is_valid(unsigned pinmux)
-{
- return pinmux != MCFPINMUX_NONE;
-}
-
-#endif
-
obj-$(CONFIG_MMU_MOTOROLA) += ints.o vectors.o
obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o
+obj-$(CONFIG_PCI) += pcibios.o
ifndef CONFIG_MMU_SUN3
obj-y += dma.o
#include <asm/pgalloc.h>
-#ifdef CONFIG_MMU
+#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *handle, gfp_t flag)
free_pages((unsigned long)vaddr, get_order(size));
}
-#endif /* CONFIG_MMU */
+#endif /* CONFIG_MMU && !CONFIG_COLDFIRE */
EXPORT_SYMBOL(dma_alloc_coherent);
EXPORT_SYMBOL(dma_free_coherent);
size_t size, enum dma_data_direction dir)
{
switch (dir) {
+ case DMA_BIDIRECTIONAL:
case DMA_TO_DEVICE:
cache_push(handle, size);
break;
-#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
-#include "entry_mm.S"
+/* -*- mode: asm -*-
+ *
+ * linux/arch/m68k/kernel/entry.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file README.legal in the main directory of this archive
+ * for more details.
+ *
+ * Linux/m68k support by Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ *
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ */
+
+/*
+ * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so
+ * all pointers that used to be 'current' are now entry
+ * number 0 in the 'current_set' list.
+ *
+ * 6/05/00 RZ: addedd writeback completion after return from sighandler
+ * for 68040
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+#include <asm/setup.h>
+#include <asm/segment.h>
+#include <asm/traps.h>
+#include <asm/unistd.h>
+#include <asm/asm-offsets.h>
+#include <asm/entry.h>
+
+.globl system_call, buserr, trap, resume
+.globl sys_call_table
+.globl sys_fork, sys_clone, sys_vfork
+.globl ret_from_interrupt, bad_interrupt
+.globl auto_irqhandler_fixup
+.globl user_irqvec_fixup
+
+.text
+ENTRY(sys_fork)
+ SAVE_SWITCH_STACK
+ pea %sp@(SWITCH_STACK_SIZE)
+ jbsr m68k_fork
+ addql #4,%sp
+ RESTORE_SWITCH_STACK
+ rts
+
+ENTRY(sys_clone)
+ SAVE_SWITCH_STACK
+ pea %sp@(SWITCH_STACK_SIZE)
+ jbsr m68k_clone
+ addql #4,%sp
+ RESTORE_SWITCH_STACK
+ rts
+
+ENTRY(sys_vfork)
+ SAVE_SWITCH_STACK
+ pea %sp@(SWITCH_STACK_SIZE)
+ jbsr m68k_vfork
+ addql #4,%sp
+ RESTORE_SWITCH_STACK
+ rts
+
+ENTRY(sys_sigreturn)
+ SAVE_SWITCH_STACK
+ jbsr do_sigreturn
+ RESTORE_SWITCH_STACK
+ rts
+
+ENTRY(sys_rt_sigreturn)
+ SAVE_SWITCH_STACK
+ jbsr do_rt_sigreturn
+ RESTORE_SWITCH_STACK
+ rts
+
+ENTRY(buserr)
+ SAVE_ALL_INT
+ GET_CURRENT(%d0)
+ movel %sp,%sp@- | stack frame pointer argument
+ jbsr buserr_c
+ addql #4,%sp
+ jra ret_from_exception
+
+ENTRY(trap)
+ SAVE_ALL_INT
+ GET_CURRENT(%d0)
+ movel %sp,%sp@- | stack frame pointer argument
+ jbsr trap_c
+ addql #4,%sp
+ jra ret_from_exception
+
+ | After a fork we jump here directly from resume,
+ | so that %d1 contains the previous task
+ | schedule_tail now used regardless of CONFIG_SMP
+ENTRY(ret_from_fork)
+ movel %d1,%sp@-
+ jsr schedule_tail
+ addql #4,%sp
+ jra ret_from_exception
+
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
+
+#ifdef TRAP_DBG_INTERRUPT
+
+.globl dbginterrupt
+ENTRY(dbginterrupt)
+ SAVE_ALL_INT
+ GET_CURRENT(%d0)
+ movel %sp,%sp@- /* stack frame pointer argument */
+ jsr dbginterrupt_c
+ addql #4,%sp
+ jra ret_from_exception
+#endif
+
+ENTRY(reschedule)
+ /* save top of frame */
+ pea %sp@
+ jbsr set_esp0
+ addql #4,%sp
+ pea ret_from_exception
+ jmp schedule
+
+ENTRY(ret_from_user_signal)
+ moveq #__NR_sigreturn,%d0
+ trap #0
+
+ENTRY(ret_from_user_rt_signal)
+ movel #__NR_rt_sigreturn,%d0
+ trap #0
+
#else
-#include "entry_no.S"
+
+do_trace_entry:
+ movel #-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
+ subql #4,%sp
+ SAVE_SWITCH_STACK
+ jbsr syscall_trace
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ movel %sp@(PT_OFF_ORIG_D0),%d0
+ cmpl #NR_syscalls,%d0
+ jcs syscall
+badsys:
+ movel #-ENOSYS,%sp@(PT_OFF_D0)
+ jra ret_from_syscall
+
+do_trace_exit:
+ subql #4,%sp
+ SAVE_SWITCH_STACK
+ jbsr syscall_trace
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ jra .Lret_from_exception
+
+ENTRY(ret_from_signal)
+ movel %curptr@(TASK_STACK),%a1
+ tstb %a1@(TINFO_FLAGS+2)
+ jge 1f
+ jbsr syscall_trace
+1: RESTORE_SWITCH_STACK
+ addql #4,%sp
+/* on 68040 complete pending writebacks if any */
+#ifdef CONFIG_M68040
+ bfextu %sp@(PT_OFF_FORMATVEC){#0,#4},%d0
+ subql #7,%d0 | bus error frame ?
+ jbne 1f
+ movel %sp,%sp@-
+ jbsr berr_040cleanup
+ addql #4,%sp
+1:
+#endif
+ jra .Lret_from_exception
+
+ENTRY(system_call)
+ SAVE_ALL_SYS
+
+ GET_CURRENT(%d1)
+ movel %d1,%a1
+
+ | save top of frame
+ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
+
+ | syscall trace?
+ tstb %a1@(TINFO_FLAGS+2)
+ jmi do_trace_entry
+ cmpl #NR_syscalls,%d0
+ jcc badsys
+syscall:
+ jbsr @(sys_call_table,%d0:l:4)@(0)
+ movel %d0,%sp@(PT_OFF_D0) | save the return value
+ret_from_syscall:
+ |oriw #0x0700,%sr
+ movel %curptr@(TASK_STACK),%a1
+ movew %a1@(TINFO_FLAGS+2),%d0
+ jne syscall_exit_work
+1: RESTORE_ALL
+
+syscall_exit_work:
+ btst #5,%sp@(PT_OFF_SR) | check if returning to kernel
+ bnes 1b | if so, skip resched, signals
+ lslw #1,%d0
+ jcs do_trace_exit
+ jmi do_delayed_trace
+ lslw #8,%d0
+ jne do_signal_return
+ pea resume_userspace
+ jra schedule
+
+
+ENTRY(ret_from_exception)
+.Lret_from_exception:
+ btst #5,%sp@(PT_OFF_SR) | check if returning to kernel
+ bnes 1f | if so, skip resched, signals
+ | only allow interrupts when we are really the last one on the
+ | kernel stack, otherwise stack overflow can occur during
+ | heavy interrupt load
+ andw #ALLOWINT,%sr
+
+resume_userspace:
+ movel %curptr@(TASK_STACK),%a1
+ moveb %a1@(TINFO_FLAGS+3),%d0
+ jne exit_work
+1: RESTORE_ALL
+
+exit_work:
+ | save top of frame
+ movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
+ lslb #1,%d0
+ jne do_signal_return
+ pea resume_userspace
+ jra schedule
+
+
+do_signal_return:
+ |andw #ALLOWINT,%sr
+ subql #4,%sp | dummy return address
+ SAVE_SWITCH_STACK
+ pea %sp@(SWITCH_STACK_SIZE)
+ bsrl do_notify_resume
+ addql #4,%sp
+ RESTORE_SWITCH_STACK
+ addql #4,%sp
+ jbra resume_userspace
+
+do_delayed_trace:
+ bclr #7,%sp@(PT_OFF_SR) | clear trace bit in SR
+ pea 1 | send SIGTRAP
+ movel %curptr,%sp@-
+ pea LSIGTRAP
+ jbsr send_sig
+ addql #8,%sp
+ addql #4,%sp
+ jbra resume_userspace
+
+
+/* This is the main interrupt handler for autovector interrupts */
+
+ENTRY(auto_inthandler)
+ SAVE_ALL_INT
+ GET_CURRENT(%d0)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
+ | put exception # in d0
+ bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
+ subw #VEC_SPUR,%d0
+
+ movel %sp,%sp@-
+ movel %d0,%sp@- | put vector # on stack
+auto_irqhandler_fixup = . + 2
+ jsr do_IRQ | process the IRQ
+ addql #8,%sp | pop parameters off stack
+
+ret_from_interrupt:
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
+ jeq ret_from_last_interrupt
+2: RESTORE_ALL
+
+ ALIGN
+ret_from_last_interrupt:
+ moveq #(~ALLOWINT>>8)&0xff,%d0
+ andb %sp@(PT_OFF_SR),%d0
+ jne 2b
+
+ /* check if we need to do software interrupts */
+ tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING
+ jeq .Lret_from_exception
+ pea ret_from_exception
+ jra do_softirq
+
+/* Handler for user defined interrupt vectors */
+
+ENTRY(user_inthandler)
+ SAVE_ALL_INT
+ GET_CURRENT(%d0)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
+ | put exception # in d0
+ bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
+user_irqvec_fixup = . + 2
+ subw #VEC_USER,%d0
+
+ movel %sp,%sp@-
+ movel %d0,%sp@- | put vector # on stack
+ jsr do_IRQ | process the IRQ
+ addql #8,%sp | pop parameters off stack
+
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
+ jeq ret_from_last_interrupt
+ RESTORE_ALL
+
+/* Handler for uninitialized and spurious interrupts */
+
+ENTRY(bad_inthandler)
+ SAVE_ALL_INT
+ GET_CURRENT(%d0)
+ movel %d0,%a1
+ addqb #1,%a1@(TINFO_PREEMPT+1)
+
+ movel %sp,%sp@-
+ jsr handle_badint
+ addql #4,%sp
+
+ movel %curptr@(TASK_STACK),%a1
+ subqb #1,%a1@(TINFO_PREEMPT+1)
+ jeq ret_from_last_interrupt
+ RESTORE_ALL
+
+
+resume:
+ /*
+ * Beware - when entering resume, prev (the current task) is
+ * in a0, next (the new task) is in a1,so don't change these
+ * registers until their contents are no longer needed.
+ */
+
+ /* save sr */
+ movew %sr,%a0@(TASK_THREAD+THREAD_SR)
+
+ /* save fs (sfc,%dfc) (may be pointing to kernel memory) */
+ movec %sfc,%d0
+ movew %d0,%a0@(TASK_THREAD+THREAD_FS)
+
+ /* save usp */
+ /* it is better to use a movel here instead of a movew 8*) */
+ movec %usp,%d0
+ movel %d0,%a0@(TASK_THREAD+THREAD_USP)
+
+ /* save non-scratch registers on stack */
+ SAVE_SWITCH_STACK
+
+ /* save current kernel stack pointer */
+ movel %sp,%a0@(TASK_THREAD+THREAD_KSP)
+
+ /* save floating point context */
+#ifndef CONFIG_M68KFPU_EMU_ONLY
+#ifdef CONFIG_M68KFPU_EMU
+ tstl m68k_fputype
+ jeq 3f
+#endif
+ fsave %a0@(TASK_THREAD+THREAD_FPSTATE)
+
+#if defined(CONFIG_M68060)
+#if !defined(CPU_M68060_ONLY)
+ btst #3,m68k_cputype+3
+ beqs 1f
+#endif
+ /* The 060 FPU keeps status in bits 15-8 of the first longword */
+ tstb %a0@(TASK_THREAD+THREAD_FPSTATE+2)
+ jeq 3f
+#if !defined(CPU_M68060_ONLY)
+ jra 2f
+#endif
+#endif /* CONFIG_M68060 */
+#if !defined(CPU_M68060_ONLY)
+1: tstb %a0@(TASK_THREAD+THREAD_FPSTATE)
+ jeq 3f
+#endif
+2: fmovemx %fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG)
+ fmoveml %fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL)
+3:
+#endif /* CONFIG_M68KFPU_EMU_ONLY */
+ /* Return previous task in %d1 */
+ movel %curptr,%d1
+
+ /* switch to new task (a1 contains new task) */
+ movel %a1,%curptr
+
+ /* restore floating point context */
+#ifndef CONFIG_M68KFPU_EMU_ONLY
+#ifdef CONFIG_M68KFPU_EMU
+ tstl m68k_fputype
+ jeq 4f
+#endif
+#if defined(CONFIG_M68060)
+#if !defined(CPU_M68060_ONLY)
+ btst #3,m68k_cputype+3
+ beqs 1f
+#endif
+ /* The 060 FPU keeps status in bits 15-8 of the first longword */
+ tstb %a1@(TASK_THREAD+THREAD_FPSTATE+2)
+ jeq 3f
+#if !defined(CPU_M68060_ONLY)
+ jra 2f
+#endif
+#endif /* CONFIG_M68060 */
+#if !defined(CPU_M68060_ONLY)
+1: tstb %a1@(TASK_THREAD+THREAD_FPSTATE)
+ jeq 3f
#endif
+2: fmovemx %a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7
+ fmoveml %a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar
+3: frestore %a1@(TASK_THREAD+THREAD_FPSTATE)
+4:
+#endif /* CONFIG_M68KFPU_EMU_ONLY */
+
+ /* restore the kernel stack pointer */
+ movel %a1@(TASK_THREAD+THREAD_KSP),%sp
+
+ /* restore non-scratch registers */
+ RESTORE_SWITCH_STACK
+
+ /* restore user stack pointer */
+ movel %a1@(TASK_THREAD+THREAD_USP),%a0
+ movel %a0,%usp
+
+ /* restore fs (sfc,%dfc) */
+ movew %a1@(TASK_THREAD+THREAD_FS),%a0
+ movec %a0,%sfc
+ movec %a0,%dfc
+
+ /* restore status register */
+ movew %a1@(TASK_THREAD+THREAD_SR),%sr
+
+ rts
+
+#endif /* CONFIG_MMU && !CONFIG_COLDFIRE */
+++ /dev/null
-/* -*- mode: asm -*-
- *
- * linux/arch/m68k/kernel/entry.S
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- *
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all interrupts
- * and faults that can result in a task-switch.
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after a timer-interrupt and after each system call.
- *
- */
-
-/*
- * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so
- * all pointers that used to be 'current' are now entry
- * number 0 in the 'current_set' list.
- *
- * 6/05/00 RZ: addedd writeback completion after return from sighandler
- * for 68040
- */
-
-#include <linux/linkage.h>
-#include <asm/entry.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/traps.h>
-#include <asm/unistd.h>
-
-#include <asm/asm-offsets.h>
-
-.globl system_call, buserr, trap, resume
-.globl sys_call_table
-.globl sys_fork, sys_clone, sys_vfork
-.globl ret_from_interrupt, bad_interrupt
-.globl auto_irqhandler_fixup
-.globl user_irqvec_fixup
-
-.text
-ENTRY(buserr)
- SAVE_ALL_INT
- GET_CURRENT(%d0)
- movel %sp,%sp@- | stack frame pointer argument
- bsrl buserr_c
- addql #4,%sp
- jra .Lret_from_exception
-
-ENTRY(trap)
- SAVE_ALL_INT
- GET_CURRENT(%d0)
- movel %sp,%sp@- | stack frame pointer argument
- bsrl trap_c
- addql #4,%sp
- jra .Lret_from_exception
-
- | After a fork we jump here directly from resume,
- | so that %d1 contains the previous task
- | schedule_tail now used regardless of CONFIG_SMP
-ENTRY(ret_from_fork)
- movel %d1,%sp@-
- jsr schedule_tail
- addql #4,%sp
- jra .Lret_from_exception
-
-do_trace_entry:
- movel #-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
- subql #4,%sp
- SAVE_SWITCH_STACK
- jbsr syscall_trace
- RESTORE_SWITCH_STACK
- addql #4,%sp
- movel %sp@(PT_OFF_ORIG_D0),%d0
- cmpl #NR_syscalls,%d0
- jcs syscall
-badsys:
- movel #-ENOSYS,%sp@(PT_OFF_D0)
- jra ret_from_syscall
-
-do_trace_exit:
- subql #4,%sp
- SAVE_SWITCH_STACK
- jbsr syscall_trace
- RESTORE_SWITCH_STACK
- addql #4,%sp
- jra .Lret_from_exception
-
-ENTRY(ret_from_signal)
- movel %curptr@(TASK_STACK),%a1
- tstb %a1@(TINFO_FLAGS+2)
- jge 1f
- jbsr syscall_trace
-1: RESTORE_SWITCH_STACK
- addql #4,%sp
-/* on 68040 complete pending writebacks if any */
-#ifdef CONFIG_M68040
- bfextu %sp@(PT_OFF_FORMATVEC){#0,#4},%d0
- subql #7,%d0 | bus error frame ?
- jbne 1f
- movel %sp,%sp@-
- jbsr berr_040cleanup
- addql #4,%sp
-1:
-#endif
- jra .Lret_from_exception
-
-ENTRY(system_call)
- SAVE_ALL_SYS
-
- GET_CURRENT(%d1)
- movel %d1,%a1
-
- | save top of frame
- movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
-
- | syscall trace?
- tstb %a1@(TINFO_FLAGS+2)
- jmi do_trace_entry
- cmpl #NR_syscalls,%d0
- jcc badsys
-syscall:
- jbsr @(sys_call_table,%d0:l:4)@(0)
- movel %d0,%sp@(PT_OFF_D0) | save the return value
-ret_from_syscall:
- |oriw #0x0700,%sr
- movel %curptr@(TASK_STACK),%a1
- movew %a1@(TINFO_FLAGS+2),%d0
- jne syscall_exit_work
-1: RESTORE_ALL
-
-syscall_exit_work:
- btst #5,%sp@(PT_OFF_SR) | check if returning to kernel
- bnes 1b | if so, skip resched, signals
- lslw #1,%d0
- jcs do_trace_exit
- jmi do_delayed_trace
- lslw #8,%d0
- jne do_signal_return
- pea resume_userspace
- jra schedule
-
-
-ENTRY(ret_from_exception)
-.Lret_from_exception:
- btst #5,%sp@(PT_OFF_SR) | check if returning to kernel
- bnes 1f | if so, skip resched, signals
- | only allow interrupts when we are really the last one on the
- | kernel stack, otherwise stack overflow can occur during
- | heavy interrupt load
- andw #ALLOWINT,%sr
-
-resume_userspace:
- movel %curptr@(TASK_STACK),%a1
- moveb %a1@(TINFO_FLAGS+3),%d0
- jne exit_work
-1: RESTORE_ALL
-
-exit_work:
- | save top of frame
- movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0)
- lslb #1,%d0
- jne do_signal_return
- pea resume_userspace
- jra schedule
-
-
-do_signal_return:
- |andw #ALLOWINT,%sr
- subql #4,%sp | dummy return address
- SAVE_SWITCH_STACK
- pea %sp@(SWITCH_STACK_SIZE)
- bsrl do_notify_resume
- addql #4,%sp
- RESTORE_SWITCH_STACK
- addql #4,%sp
- jbra resume_userspace
-
-do_delayed_trace:
- bclr #7,%sp@(PT_OFF_SR) | clear trace bit in SR
- pea 1 | send SIGTRAP
- movel %curptr,%sp@-
- pea LSIGTRAP
- jbsr send_sig
- addql #8,%sp
- addql #4,%sp
- jbra resume_userspace
-
-
-/* This is the main interrupt handler for autovector interrupts */
-
-ENTRY(auto_inthandler)
- SAVE_ALL_INT
- GET_CURRENT(%d0)
- movel %d0,%a1
- addqb #1,%a1@(TINFO_PREEMPT+1)
- | put exception # in d0
- bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
- subw #VEC_SPUR,%d0
-
- movel %sp,%sp@-
- movel %d0,%sp@- | put vector # on stack
-auto_irqhandler_fixup = . + 2
- jsr do_IRQ | process the IRQ
- addql #8,%sp | pop parameters off stack
-
-ret_from_interrupt:
- movel %curptr@(TASK_STACK),%a1
- subqb #1,%a1@(TINFO_PREEMPT+1)
- jeq ret_from_last_interrupt
-2: RESTORE_ALL
-
- ALIGN
-ret_from_last_interrupt:
- moveq #(~ALLOWINT>>8)&0xff,%d0
- andb %sp@(PT_OFF_SR),%d0
- jne 2b
-
- /* check if we need to do software interrupts */
- tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING
- jeq .Lret_from_exception
- pea ret_from_exception
- jra do_softirq
-
-/* Handler for user defined interrupt vectors */
-
-ENTRY(user_inthandler)
- SAVE_ALL_INT
- GET_CURRENT(%d0)
- movel %d0,%a1
- addqb #1,%a1@(TINFO_PREEMPT+1)
- | put exception # in d0
- bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0
-user_irqvec_fixup = . + 2
- subw #VEC_USER,%d0
-
- movel %sp,%sp@-
- movel %d0,%sp@- | put vector # on stack
- jsr do_IRQ | process the IRQ
- addql #8,%sp | pop parameters off stack
-
- movel %curptr@(TASK_STACK),%a1
- subqb #1,%a1@(TINFO_PREEMPT+1)
- jeq ret_from_last_interrupt
- RESTORE_ALL
-
-/* Handler for uninitialized and spurious interrupts */
-
-ENTRY(bad_inthandler)
- SAVE_ALL_INT
- GET_CURRENT(%d0)
- movel %d0,%a1
- addqb #1,%a1@(TINFO_PREEMPT+1)
-
- movel %sp,%sp@-
- jsr handle_badint
- addql #4,%sp
-
- movel %curptr@(TASK_STACK),%a1
- subqb #1,%a1@(TINFO_PREEMPT+1)
- jeq ret_from_last_interrupt
- RESTORE_ALL
-
-
-ENTRY(sys_fork)
- SAVE_SWITCH_STACK
- pea %sp@(SWITCH_STACK_SIZE)
- jbsr m68k_fork
- addql #4,%sp
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(sys_clone)
- SAVE_SWITCH_STACK
- pea %sp@(SWITCH_STACK_SIZE)
- jbsr m68k_clone
- addql #4,%sp
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(sys_vfork)
- SAVE_SWITCH_STACK
- pea %sp@(SWITCH_STACK_SIZE)
- jbsr m68k_vfork
- addql #4,%sp
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(sys_sigreturn)
- SAVE_SWITCH_STACK
- jbsr do_sigreturn
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(sys_rt_sigreturn)
- SAVE_SWITCH_STACK
- jbsr do_rt_sigreturn
- RESTORE_SWITCH_STACK
- rts
-
-resume:
- /*
- * Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1,so don't change these
- * registers until their contents are no longer needed.
- */
-
- /* save sr */
- movew %sr,%a0@(TASK_THREAD+THREAD_SR)
-
- /* save fs (sfc,%dfc) (may be pointing to kernel memory) */
- movec %sfc,%d0
- movew %d0,%a0@(TASK_THREAD+THREAD_FS)
-
- /* save usp */
- /* it is better to use a movel here instead of a movew 8*) */
- movec %usp,%d0
- movel %d0,%a0@(TASK_THREAD+THREAD_USP)
-
- /* save non-scratch registers on stack */
- SAVE_SWITCH_STACK
-
- /* save current kernel stack pointer */
- movel %sp,%a0@(TASK_THREAD+THREAD_KSP)
-
- /* save floating point context */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-#ifdef CONFIG_M68KFPU_EMU
- tstl m68k_fputype
- jeq 3f
-#endif
- fsave %a0@(TASK_THREAD+THREAD_FPSTATE)
-
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
- btst #3,m68k_cputype+3
- beqs 1f
-#endif
- /* The 060 FPU keeps status in bits 15-8 of the first longword */
- tstb %a0@(TASK_THREAD+THREAD_FPSTATE+2)
- jeq 3f
-#if !defined(CPU_M68060_ONLY)
- jra 2f
-#endif
-#endif /* CONFIG_M68060 */
-#if !defined(CPU_M68060_ONLY)
-1: tstb %a0@(TASK_THREAD+THREAD_FPSTATE)
- jeq 3f
-#endif
-2: fmovemx %fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG)
- fmoveml %fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL)
-3:
-#endif /* CONFIG_M68KFPU_EMU_ONLY */
- /* Return previous task in %d1 */
- movel %curptr,%d1
-
- /* switch to new task (a1 contains new task) */
- movel %a1,%curptr
-
- /* restore floating point context */
-#ifndef CONFIG_M68KFPU_EMU_ONLY
-#ifdef CONFIG_M68KFPU_EMU
- tstl m68k_fputype
- jeq 4f
-#endif
-#if defined(CONFIG_M68060)
-#if !defined(CPU_M68060_ONLY)
- btst #3,m68k_cputype+3
- beqs 1f
-#endif
- /* The 060 FPU keeps status in bits 15-8 of the first longword */
- tstb %a1@(TASK_THREAD+THREAD_FPSTATE+2)
- jeq 3f
-#if !defined(CPU_M68060_ONLY)
- jra 2f
-#endif
-#endif /* CONFIG_M68060 */
-#if !defined(CPU_M68060_ONLY)
-1: tstb %a1@(TASK_THREAD+THREAD_FPSTATE)
- jeq 3f
-#endif
-2: fmovemx %a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7
- fmoveml %a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar
-3: frestore %a1@(TASK_THREAD+THREAD_FPSTATE)
-4:
-#endif /* CONFIG_M68KFPU_EMU_ONLY */
-
- /* restore the kernel stack pointer */
- movel %a1@(TASK_THREAD+THREAD_KSP),%sp
-
- /* restore non-scratch registers */
- RESTORE_SWITCH_STACK
-
- /* restore user stack pointer */
- movel %a1@(TASK_THREAD+THREAD_USP),%a0
- movel %a0,%usp
-
- /* restore fs (sfc,%dfc) */
- movew %a1@(TASK_THREAD+THREAD_FS),%a0
- movec %a0,%sfc
- movec %a0,%dfc
-
- /* restore status register */
- movew %a1@(TASK_THREAD+THREAD_SR),%sr
-
- rts
-
+++ /dev/null
-/*
- * linux/arch/m68knommu/kernel/entry.S
- *
- * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
- * Kenneth Albanowski <kjahds@kjahds.com>,
- * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68k/kernel/entry.S
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- *
- * 68060 fixes by Jesper Skov
- * ColdFire support by Greg Ungerer (gerg@snapgear.com)
- * 5307 fixes by David W. Miller
- * linux 2.4 support David McCullough <davidm@snapgear.com>
- */
-
-#include <linux/linkage.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-#include <asm/unistd.h>
-
-.text
-
-.globl buserr
-.globl trap
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_fork
-.globl sys_clone
-.globl sys_vfork
-
-ENTRY(buserr)
- SAVE_ALL_INT
- GET_CURRENT(%d0)
- movel %sp,%sp@- /* stack frame pointer argument */
- jsr buserr_c
- addql #4,%sp
- jra ret_from_exception
-
-ENTRY(trap)
- SAVE_ALL_INT
- GET_CURRENT(%d0)
- movel %sp,%sp@- /* stack frame pointer argument */
- jsr trap_c
- addql #4,%sp
- jra ret_from_exception
-
-#ifdef TRAP_DBG_INTERRUPT
-
-.globl dbginterrupt
-ENTRY(dbginterrupt)
- SAVE_ALL_INT
- GET_CURRENT(%d0)
- movel %sp,%sp@- /* stack frame pointer argument */
- jsr dbginterrupt_c
- addql #4,%sp
- jra ret_from_exception
-#endif
-
-ENTRY(reschedule)
- /* save top of frame */
- pea %sp@
- jbsr set_esp0
- addql #4,%sp
- pea ret_from_exception
- jmp schedule
-
-ENTRY(ret_from_fork)
- movel %d1,%sp@-
- jsr schedule_tail
- addql #4,%sp
- jra ret_from_exception
-
-ENTRY(sys_fork)
- SAVE_SWITCH_STACK
- pea %sp@(SWITCH_STACK_SIZE)
- jbsr m68k_fork
- addql #4,%sp
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(sys_vfork)
- SAVE_SWITCH_STACK
- pea %sp@(SWITCH_STACK_SIZE)
- jbsr m68k_vfork
- addql #4,%sp
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(sys_clone)
- SAVE_SWITCH_STACK
- pea %sp@(SWITCH_STACK_SIZE)
- jbsr m68k_clone
- addql #4,%sp
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(sys_sigreturn)
- SAVE_SWITCH_STACK
- jbsr do_sigreturn
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(sys_rt_sigreturn)
- SAVE_SWITCH_STACK
- jbsr do_rt_sigreturn
- RESTORE_SWITCH_STACK
- rts
-
-ENTRY(ret_from_user_signal)
- moveq #__NR_sigreturn,%d0
- trap #0
-
-ENTRY(ret_from_user_rt_signal)
- movel #__NR_rt_sigreturn,%d0
- trap #0
-
--- /dev/null
+/*
+ * pci.c -- basic PCI support code
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+
+/*
+ * From arch/i386/kernel/pci-i386.c:
+ *
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might be mirrored at 0x0100-0x03ff..
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ resource_size_t start = res->start;
+
+ if ((res->flags & IORESOURCE_IO) && (start & 0x300))
+ start = (start + 0x3ff) & ~0x3ff;
+
+ start = (start + align - 1) & ~(align - 1);
+
+ return start;
+}
+
+/*
+ * This is taken from the ARM code for this.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ struct resource *r;
+ u16 cmd, newcmd;
+ int idx;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ newcmd = cmd;
+
+ for (idx = 0; idx < 6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1 << idx)))
+ continue;
+
+ r = dev->resource + idx;
+ if (!r->start && r->end) {
+ pr_err(KERN_ERR "PCI: Device %s not available because of resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ newcmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ newcmd |= PCI_COMMAND_MEMORY;
+ }
+
+ /*
+ * Bridges (eg, cardbus bridges) need to be fully enabled
+ */
+ if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
+ newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+
+
+ if (newcmd != cmd) {
+ pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
+ pci_name(dev), cmd, newcmd);
+ pci_write_config_word(dev, PCI_COMMAND, newcmd);
+ }
+ return 0;
+}
+
+void pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
+ }
+}
+
+char __devinit *pcibios_setup(char *str)
+{
+ return str;
+}
+
void cache_clear (unsigned long paddr, int len)
{
if (CPU_IS_COLDFIRE) {
- flush_cf_bcache(0, DCACHE_MAX_ADDR);
+ clear_cf_bcache(0, DCACHE_MAX_ADDR);
} else if (CPU_IS_040_OR_060) {
int tmp;
obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M525x) += m525x.o timers.o intc.o intc-525x.o reset.o
obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
obj-$(CONFIG_M532x) += m532x.o timers.o intc-simr.o reset.o
obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
+obj-$(CONFIG_M5441x) += m5441x.o pit.o intc-simr.o reset.o
obj-$(CONFIG_NETtel) += nettel.o
obj-$(CONFIG_CLEOPATRA) += nettel.o
obj-$(CONFIG_FIREBEE) += firebee.o
+obj-$(CONFIG_MCF8390) += mcf8390.o
-obj-y += pinmux.o gpio.o
+obj-$(CONFIG_PCI) += pci.o
+
+obj-y += gpio.o
extra-y := head.o
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
/***************************************************************************/
-
+#ifndef MCFPM_PPMCR0
struct clk *clk_get(struct device *dev, const char *id)
{
return NULL;
return MCF_CLK;
}
EXPORT_SYMBOL(clk_get_rate);
+#else
+static DEFINE_SPINLOCK(clk_lock);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ const char *clk_name = dev ? dev_name(dev) : id ? id : NULL;
+ struct clk *clk;
+ unsigned i;
+
+ for (i = 0; (clk = mcf_clks[i]) != NULL; ++i)
+ if (!strcmp(clk->name, clk_name))
+ return clk;
+ pr_warn("clk_get: didn't find clock %s\n", clk_name);
+ return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&clk_lock, flags);
+ if ((clk->enabled++ == 0) && clk->clk_ops)
+ clk->clk_ops->enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&clk_lock, flags);
+ if ((--clk->enabled == 0) && clk->clk_ops)
+ clk->clk_ops->disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void clk_put(struct clk *clk)
+{
+ if (clk->enabled != 0)
+ pr_warn("clk_put %s still enabled\n", clk->name);
+}
+EXPORT_SYMBOL(clk_put);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/***************************************************************************/
+
+void __clk_init_enabled(struct clk *clk)
+{
+ clk->enabled = 1;
+ clk->clk_ops->enable(clk);
+}
+
+void __clk_init_disabled(struct clk *clk)
+{
+ clk->enabled = 0;
+ clk->clk_ops->disable(clk);
+}
+
+static void __clk_enable0(struct clk *clk)
+{
+ __raw_writeb(clk->slot, MCFPM_PPMCR0);
+}
+
+static void __clk_disable0(struct clk *clk)
+{
+ __raw_writeb(clk->slot, MCFPM_PPMSR0);
+}
+
+struct clk_ops clk_ops0 = {
+ .enable = __clk_enable0,
+ .disable = __clk_disable0,
+};
+
+#ifdef MCFPM_PPMCR1
+static void __clk_enable1(struct clk *clk)
+{
+ __raw_writeb(clk->slot, MCFPM_PPMCR1);
+}
+
+static void __clk_disable1(struct clk *clk)
+{
+ __raw_writeb(clk->slot, MCFPM_PPMSR1);
+}
+
+struct clk_ops clk_ops1 = {
+ .enable = __clk_enable1,
+ .disable = __clk_disable1,
+};
+#endif /* MCFPM_PPMCR1 */
+#endif /* MCFPM_PPMCR0 */
struct clk *devm_clk_get(struct device *dev, const char *id)
{
return NULL;
}
EXPORT_SYMBOL(devm_clk_get);
-
-/***************************************************************************/
#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
+#include <linux/fec.h>
#include <asm/traps.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfqspi.h>
/*
- * All current ColdFire parts contain from 2, 3 or 4 UARTS.
+ * All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.
*/
static struct mcf_platform_uart mcf_uart_platform_data[] = {
{
.mapbase = MCFUART_BASE3,
.irq = MCF_IRQ_UART3,
},
+#endif
+#ifdef MCFUART_BASE4
+ {
+ .mapbase = MCFUART_BASE4,
+ .irq = MCF_IRQ_UART4,
+ },
+#endif
+#ifdef MCFUART_BASE5
+ {
+ .mapbase = MCFUART_BASE5,
+ .irq = MCF_IRQ_UART5,
+ },
+#endif
+#ifdef MCFUART_BASE6
+ {
+ .mapbase = MCFUART_BASE6,
+ .irq = MCF_IRQ_UART6,
+ },
+#endif
+#ifdef MCFUART_BASE7
+ {
+ .mapbase = MCFUART_BASE7,
+ .irq = MCF_IRQ_UART7,
+ },
+#endif
+#ifdef MCFUART_BASE8
+ {
+ .mapbase = MCFUART_BASE8,
+ .irq = MCF_IRQ_UART8,
+ },
+#endif
+#ifdef MCFUART_BASE9
+ {
+ .mapbase = MCFUART_BASE9,
+ .irq = MCF_IRQ_UART9,
+ },
#endif
{ },
};
};
#ifdef CONFIG_FEC
+
+#ifdef CONFIG_M5441x
+#define FEC_NAME "enet-fec"
+static struct fec_platform_data fec_pdata = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+#define FEC_PDATA (&fec_pdata)
+#else
+#define FEC_NAME "fec"
+#define FEC_PDATA NULL
+#endif
+
/*
* Some ColdFire cores contain the Fast Ethernet Controller (FEC)
* block. It is Freescale's own hardware block. Some ColdFires
};
static struct platform_device mcf_fec0 = {
- .name = "fec",
+ .name = FEC_NAME,
.id = 0,
.num_resources = ARRAY_SIZE(mcf_fec0_resources),
.resource = mcf_fec0_resources,
+ .dev.platform_data = FEC_PDATA,
};
#ifdef MCFFEC_BASE1
};
static struct platform_device mcf_fec1 = {
- .name = "fec",
+ .name = FEC_NAME,
.id = 1,
.num_resources = ARRAY_SIZE(mcf_fec1_resources),
.resource = mcf_fec1_resources,
+ .dev.platform_data = FEC_PDATA,
};
#endif /* MCFFEC_BASE1 */
#endif /* CONFIG_FEC */
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
-#include <asm/gpio.h>
-#include <asm/pinmux.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
#include <asm/mcfgpio.h>
-#define MCF_CHIP(chip) container_of(chip, struct mcf_gpio_chip, gpio_chip)
+int __mcfgpio_get_value(unsigned gpio)
+{
+ return mcfgpio_read(__mcfgpio_ppdr(gpio)) & mcfgpio_bit(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_get_value);
+
+void __mcfgpio_set_value(unsigned gpio, int value)
+{
+ if (gpio < MCFGPIO_SCR_START) {
+ unsigned long flags;
+ MCFGPIO_PORTTYPE data;
+
+ local_irq_save(flags);
+ data = mcfgpio_read(__mcfgpio_podr(gpio));
+ if (value)
+ data |= mcfgpio_bit(gpio);
+ else
+ data &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_podr(gpio));
+ local_irq_restore(flags);
+ } else {
+ if (value)
+ mcfgpio_write(mcfgpio_bit(gpio),
+ MCFGPIO_SETR_PORT(gpio));
+ else
+ mcfgpio_write(~mcfgpio_bit(gpio),
+ MCFGPIO_CLRR_PORT(gpio));
+ }
+}
+EXPORT_SYMBOL(__mcfgpio_set_value);
-int mcf_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+int __mcfgpio_direction_input(unsigned gpio)
{
unsigned long flags;
MCFGPIO_PORTTYPE dir;
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
local_irq_save(flags);
- dir = mcfgpio_read(mcf_chip->pddr);
- dir &= ~mcfgpio_bit(chip->base + offset);
- mcfgpio_write(dir, mcf_chip->pddr);
+ dir = mcfgpio_read(__mcfgpio_pddr(gpio));
+ dir &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(dir, __mcfgpio_pddr(gpio));
local_irq_restore(flags);
return 0;
}
+EXPORT_SYMBOL(__mcfgpio_direction_input);
-int mcf_gpio_get_value(struct gpio_chip *chip, unsigned offset)
-{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
- return mcfgpio_read(mcf_chip->ppdr) & mcfgpio_bit(chip->base + offset);
-}
-
-int mcf_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
+int __mcfgpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
MCFGPIO_PORTTYPE data;
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
local_irq_save(flags);
- /* write the value to the output latch */
- data = mcfgpio_read(mcf_chip->podr);
+ data = mcfgpio_read(__mcfgpio_pddr(gpio));
if (value)
- data |= mcfgpio_bit(chip->base + offset);
+ data |= mcfgpio_bit(gpio);
else
- data &= ~mcfgpio_bit(chip->base + offset);
- mcfgpio_write(data, mcf_chip->podr);
-
- /* now set the direction to output */
- data = mcfgpio_read(mcf_chip->pddr);
- data |= mcfgpio_bit(chip->base + offset);
- mcfgpio_write(data, mcf_chip->pddr);
+ data &= mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_pddr(gpio));
+
+ /* now set the data to output */
+ if (gpio < MCFGPIO_SCR_START) {
+ data = mcfgpio_read(__mcfgpio_podr(gpio));
+ if (value)
+ data |= mcfgpio_bit(gpio);
+ else
+ data &= ~mcfgpio_bit(gpio);
+ mcfgpio_write(data, __mcfgpio_podr(gpio));
+ } else {
+ if (value)
+ mcfgpio_write(mcfgpio_bit(gpio),
+ MCFGPIO_SETR_PORT(gpio));
+ else
+ mcfgpio_write(~mcfgpio_bit(gpio),
+ MCFGPIO_CLRR_PORT(gpio));
+ }
local_irq_restore(flags);
+ return 0;
+}
+EXPORT_SYMBOL(__mcfgpio_direction_output);
+int __mcfgpio_request(unsigned gpio)
+{
return 0;
}
+EXPORT_SYMBOL(__mcfgpio_request);
-void mcf_gpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
+void __mcfgpio_free(unsigned gpio)
{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+ __mcfgpio_direction_input(gpio);
+}
+EXPORT_SYMBOL(__mcfgpio_free);
- unsigned long flags;
- MCFGPIO_PORTTYPE data;
+#ifdef CONFIG_GPIOLIB
- local_irq_save(flags);
- data = mcfgpio_read(mcf_chip->podr);
- if (value)
- data |= mcfgpio_bit(chip->base + offset);
- else
- data &= ~mcfgpio_bit(chip->base + offset);
- mcfgpio_write(data, mcf_chip->podr);
- local_irq_restore(flags);
+int mcfgpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return __mcfgpio_direction_input(offset);
}
-void mcf_gpio_set_value_fast(struct gpio_chip *chip, unsigned offset, int value)
+int mcfgpio_get_value(struct gpio_chip *chip, unsigned offset)
{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
- if (value)
- mcfgpio_write(mcfgpio_bit(chip->base + offset), mcf_chip->setr);
- else
- mcfgpio_write(~mcfgpio_bit(chip->base + offset), mcf_chip->clrr);
+ return __mcfgpio_get_value(offset);
}
-int mcf_gpio_request(struct gpio_chip *chip, unsigned offset)
+int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
-
- return mcf_chip->gpio_to_pinmux ?
- mcf_pinmux_request(mcf_chip->gpio_to_pinmux[offset], 0) : 0;
+ return __mcfgpio_direction_output(offset, value);
}
-void mcf_gpio_free(struct gpio_chip *chip, unsigned offset)
+void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset, int value)
{
- struct mcf_gpio_chip *mcf_chip = MCF_CHIP(chip);
+ __mcfgpio_set_value(offset, value);
+}
- mcf_gpio_direction_input(chip, offset);
+int mcfgpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ return __mcfgpio_request(offset);
+}
- if (mcf_chip->gpio_to_pinmux)
- mcf_pinmux_release(mcf_chip->gpio_to_pinmux[offset], 0);
+void mcfgpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ __mcfgpio_free(offset);
}
-struct bus_type mcf_gpio_subsys = {
+struct bus_type mcfgpio_subsys = {
.name = "gpio",
.dev_name = "gpio",
};
-static int __init mcf_gpio_sysinit(void)
-{
- unsigned int i = 0;
+static struct gpio_chip mcfgpio_chip = {
+ .label = "mcfgpio",
+ .request = mcfgpio_request,
+ .free = mcfgpio_free,
+ .direction_input = mcfgpio_direction_input,
+ .direction_output = mcfgpio_direction_output,
+ .get = mcfgpio_get_value,
+ .set = mcfgpio_set_value,
+ .base = 0,
+ .ngpio = MCFGPIO_PIN_MAX,
+};
- while (i < mcf_gpio_chips_size)
- gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
- return subsys_system_register(&mcf_gpio_subsys, NULL);
+static int __init mcfgpio_sysinit(void)
+{
+ gpiochip_add(&mcfgpio_chip);
+ return subsys_system_register(&mcfgpio_subsys, NULL);
}
-core_initcall(mcf_gpio_sysinit);
+core_initcall(mcfgpio_sysinit);
+#endif
.endm
#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
- defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
- defined(CONFIG_M5407)
+ defined(CONFIG_M5249) || defined(CONFIG_M525x) || \
+ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+ defined(CONFIG_M5307) || defined(CONFIG_M5407)
/*
* Not all these devices have exactly the same DRAM controller,
* but the DCMR register is virtually identical - give or take
--- /dev/null
+/*
+ * intc2.c -- support for the 2nd INTC controller of the 525x
+ *
+ * (C) Copyright 2012, Steven King <sfking@fdwdc.com>
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(struct irq_data *d)
+{
+ u32 imr = readl(MCFSIM2_GPIOINTENABLE);
+ u32 type = irqd_get_trigger_type(d);
+ int irq = d->irq - MCF_IRQ_GPIO0;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ imr &= ~(0x001 << irq);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ imr &= ~(0x100 << irq);
+ writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(struct irq_data *d)
+{
+ u32 imr = readl(MCFSIM2_GPIOINTENABLE);
+ u32 type = irqd_get_trigger_type(d);
+ int irq = d->irq - MCF_IRQ_GPIO0;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ imr |= (0x001 << irq);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ imr |= (0x100 << irq);
+ writel(imr, MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(struct irq_data *d)
+{
+ u32 imr = 0;
+ u32 type = irqd_get_trigger_type(d);
+ int irq = d->irq - MCF_IRQ_GPIO0;
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ imr |= (0x001 << irq);
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ imr |= (0x100 << irq);
+ writel(imr, MCFSIM2_GPIOINTCLEAR);
+}
+
+static int intc2_irq_gpio_set_type(struct irq_data *d, unsigned int f)
+{
+ if (f & ~IRQ_TYPE_EDGE_BOTH)
+ return -EINVAL;
+ return 0;
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+ .name = "CF-INTC2",
+ .irq_mask = intc2_irq_gpio_mask,
+ .irq_unmask = intc2_irq_gpio_unmask,
+ .irq_ack = intc2_irq_gpio_ack,
+ .irq_set_type = intc2_irq_gpio_set_type,
+};
+
+static int __init mcf_intc2_init(void)
+{
+ int irq;
+
+ /* set the interrupt base for the second interrupt controller */
+ writel(MCFINTC2_VECBASE, MCFINTC2_INTBASE);
+
+ /* GPIO interrupt sources */
+ for (irq = MCF_IRQ_GPIO0; (irq <= MCF_IRQ_GPIO6); irq++) {
+ irq_set_chip(irq, &intc2_irq_gpio_chip);
+ irq_set_handler(irq, handle_edge_irq);
+ }
+
+ return 0;
+}
+
+arch_initcall(mcf_intc2_init);
#endif
/*
- * There maybe one or two interrupt control units, each has 64
- * interrupts. If there is no second unit then MCFINTC1_* defines
- * will be 0 (and code for them optimized away).
+ * There maybe one, two or three interrupt control units, each has 64
+ * interrupts. If there is no second or third unit then MCFINTC1_* or
+ * MCFINTC2_* defines will be 0 (and code for them optimized away).
*/
static void intc_irq_mask(struct irq_data *d)
{
unsigned int irq = d->irq - MCFINT_VECBASE;
- if (MCFINTC1_SIMR && (irq > 64))
+ if (MCFINTC2_SIMR && (irq > 128))
+ __raw_writeb(irq - 128, MCFINTC2_SIMR);
+ else if (MCFINTC1_SIMR && (irq > 64))
__raw_writeb(irq - 64, MCFINTC1_SIMR);
else
__raw_writeb(irq, MCFINTC0_SIMR);
{
unsigned int irq = d->irq - MCFINT_VECBASE;
- if (MCFINTC1_CIMR && (irq > 64))
+ if (MCFINTC2_CIMR && (irq > 128))
+ __raw_writeb(irq - 128, MCFINTC2_CIMR);
+ else if (MCFINTC1_CIMR && (irq > 64))
__raw_writeb(irq - 64, MCFINTC1_CIMR);
else
__raw_writeb(irq, MCFINTC0_CIMR);
unsigned int ebit = irq2ebit(irq);
u8 v;
+#if defined(MCFEPORT_EPDDR)
/* Set EPORT line as input */
v = __raw_readb(MCFEPORT_EPDDR);
__raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
+#endif
/* Set EPORT line as interrupt source */
v = __raw_readb(MCFEPORT_EPIER);
}
irq -= MCFINT_VECBASE;
- if (MCFINTC1_ICR0 && (irq > 64))
+ if (MCFINTC2_ICR0 && (irq > 128))
+ __raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
+ else if (MCFINTC1_ICR0 && (irq > 64))
__raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
else
__raw_writeb(5, MCFINTC0_ICR0 + irq);
-
intc_irq_unmask(d);
return 0;
}
__raw_writeb(0xff, MCFINTC0_SIMR);
if (MCFINTC1_SIMR)
__raw_writeb(0xff, MCFINTC1_SIMR);
+ if (MCFINTC2_SIMR)
+ __raw_writeb(0xff, MCFINTC2_SIMR);
- eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0);
+ eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
+ (MCFINTC2_ICR0 ? 64 : 0);
for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
if ((irq >= EINT1) && (irq <= EINT7))
irq_set_chip(irq, &intc_irq_chip_edge_port);
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PP, 0, 8, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
+#include <asm/mcfclk.h>
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(CS, 9, 3),
- MCFGPF(FECI2C, 16, 4),
- MCFGPF(QSPI, 24, 4),
- MCFGPF(TIMER, 32, 4),
- MCFGPF(UART, 40, 8),
- MCFGPF(FECH, 48, 8),
- MCFGPF(FECL, 56, 8),
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 36, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "sdram.0", 42, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_34, /* mcfeport.0 */
+ &__clk_0_35, /* mcfwdt.0 */
+ &__clk_0_36, /* pll.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_42, /* sdram.0 */
+NULL,
};
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+static struct clk * const enable_clks[] __initconst = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_34, /* mcfeport.0 */
+ &__clk_0_36, /* pll.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_42, /* sdram.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+ &__clk_0_35, /* mcfwdt.0 */
+};
+
+
+static void __init m520x_clk_init(void)
+{
+ unsigned i;
+
+ /* make sure these clocks are enabled */
+ for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+ __clk_init_enabled(enable_clks[i]);
+ /* make sure these clocks are disabled */
+ for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+ __clk_init_disabled(disable_clks[i]);
+}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_sched_init = hw_timer_init;
+ m520x_clk_init();
m520x_uarts_init();
m520x_fec_init();
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(ADDR, 13, 3),
- MCFGPF(DATAH, 16, 8),
- MCFGPF(DATAL, 24, 8),
- MCFGPF(BUSCTL, 32, 8),
- MCFGPF(BS, 40, 4),
- MCFGPF(CS, 49, 7),
- MCFGPF(SDRAM, 56, 6),
- MCFGPF(FECI2C, 64, 4),
- MCFGPF(UARTH, 72, 2),
- MCFGPF(UARTL, 80, 8),
- MCFGPF(QSPI, 88, 5),
- MCFGPF(TIMER, 96, 8),
- MCFGPF(ETPU, 104, 3),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(GPIO0, 0, 32, MCFSIM2_GPIOENABLE, MCFSIM2_GPIOWRITE, MCFSIM2_GPIOREAD),
- MCFGPS(GPIO1, 32, 32, MCFSIM2_GPIO1ENABLE, MCFSIM2_GPIO1WRITE, MCFSIM2_GPIO1READ),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
--- /dev/null
+/***************************************************************************/
+
+/*
+ * 525x.c
+ *
+ * Copyright (C) 2012, Steven King <sfking@fdwdc.com>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+static void __init m525x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ /* set the GPIO function for the qspi cs gpios */
+ /* FIXME: replace with pinmux/pinctl support */
+ u32 f = readl(MCFSIM2_GPIOFUNC);
+ f |= (1 << MCFQSPI_CS2) | (1 << MCFQSPI_CS1) | (1 << MCFQSPI_CS0);
+ writel(f, MCFSIM2_GPIOFUNC);
+
+ /* QSPI irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+ MCF_MBAR + MCFSIM_QSPIICR);
+ mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+static void __init m525x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_COLDFIRE)
+ u32 r;
+
+ /* first I2C controller uses regular irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
+ MCF_MBAR + MCFSIM_I2CICR);
+ mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
+
+ /* second I2C controller is completely different */
+ r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+ r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
+ r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
+ writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
+#endif /* IS_ENABLED(CONFIG_I2C_COLDFIRE) */
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+
+ m525x_qspi_init();
+ m525x_i2c_init();
+}
+
+/***************************************************************************/
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
/***************************************************************************/
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PA, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
- MCFGPS(PB, 16, 16, MCFSIM_PBDDR, MCFSIM_PBDAT, MCFSIM_PBDAT),
- MCFGPS(Pc, 32, 16, MCFSIM_PCDDR, MCFSIM_PCDAT, MCFSIM_PCDAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
static void __init m5272_uarts_init(void)
{
u32 v;
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
-#if defined(CONFIG_M5271)
- MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(ADDR, 13, 3),
- MCFGPF(DATAH, 16, 8),
- MCFGPF(DATAL, 24, 8),
- MCFGPF(BUSCTL, 32, 8),
- MCFGPF(BS, 40, 4),
- MCFGPF(CS, 49, 7),
- MCFGPF(SDRAM, 56, 6),
- MCFGPF(FECI2C, 64, 4),
- MCFGPF(UARTH, 72, 2),
- MCFGPF(UARTL, 80, 8),
- MCFGPF(QSPI, 88, 5),
- MCFGPF(TIMER, 96, 8),
-#elif defined(CONFIG_M5275)
- MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(BUSCTL, 8, 8),
- MCFGPF(ADDR, 21, 3),
- MCFGPF(CS, 25, 7),
- MCFGPF(FEC0H, 32, 8),
- MCFGPF(FEC0L, 40, 8),
- MCFGPF(FECI2C, 48, 6),
- MCFGPF(QSPI, 56, 7),
- MCFGPF(SDRAM, 64, 8),
- MCFGPF(TIMERH, 72, 4),
- MCFGPF(TIMERL, 80, 4),
- MCFGPF(UARTL, 88, 8),
- MCFGPF(FEC1H, 96, 8),
- MCFGPF(FEC1L, 104, 8),
- MCFGPF(BS, 114, 2),
- MCFGPF(IRQ, 121, 7),
- MCFGPF(USBH, 128, 1),
- MCFGPF(USBL, 136, 8),
- MCFGPF(UARTH, 144, 4),
-#endif
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(NQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPS(TA, 8, 4, MCFGPTA_GPTDDR, MCFGPTA_GPTPORT, MCFGPTB_GPTPORT),
- MCFGPS(TB, 16, 4, MCFGPTB_GPTDDR, MCFGPTB_GPTPORT, MCFGPTB_GPTPORT),
- MCFGPS(QA, 24, 4, MCFQADC_DDRQA, MCFQADC_PORTQA, MCFQADC_PORTQA),
- MCFGPS(QB, 32, 4, MCFQADC_DDRQB, MCFQADC_PORTQB, MCFQADC_PORTQB),
- MCFGPF(A, 40, 8),
- MCFGPF(B, 48, 8),
- MCFGPF(C, 56, 8),
- MCFGPF(D, 64, 8),
- MCFGPF(E, 72, 8),
- MCFGPF(F, 80, 8),
- MCFGPF(G, 88, 8),
- MCFGPF(H, 96, 8),
- MCFGPF(J, 104, 8),
- MCFGPF(DD, 112, 8),
- MCFGPF(EH, 120, 8),
- MCFGPF(EL, 128, 8),
- MCFGPF(AS, 136, 6),
- MCFGPF(QS, 144, 7),
- MCFGPF(SD, 152, 6),
- MCFGPF(TC, 160, 4),
- MCFGPF(TD, 168, 4),
- MCFGPF(UA, 176, 4),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
/* make sure PUAPAR is set for UART0 and UART1 */
port = readb(MCF5282_GPIO_PUAPAR);
port |= 0x03 | (0x03 << 2);
- writeb(port, MCF5282_GPIO_PUAPAR);
+ writeb(port, MCFGPIO_PUAPAR);
}
/***************************************************************************/
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
#include <asm/mcfwdebug.h>
/***************************************************************************/
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
void __init config_BSP(char *commandp, int size)
{
#if defined(CONFIG_NETtel) || \
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfdma.h>
-#include <asm/mcfgpio.h>
#include <asm/mcfwdebug.h>
+#include <asm/mcfclk.h>
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
- MCFGPF(FECH, 8, 8),
- MCFGPF(FECL, 16, 8),
- MCFGPF(SSI, 24, 5),
- MCFGPF(BUSCTL, 32, 4),
- MCFGPF(BE, 40, 4),
- MCFGPF(CS, 49, 5),
- MCFGPF(PWM, 58, 4),
- MCFGPF(FECI2C, 64, 4),
- MCFGPF(UART, 72, 8),
- MCFGPF(QSPI, 80, 6),
- MCFGPF(TIMER, 88, 4),
- MCFGPF(LCDDATAH, 96, 2),
- MCFGPF(LCDDATAM, 104, 8),
- MCFGPF(LCDDATAL, 112, 8),
- MCFGPF(LCDCTLH, 120, 1),
- MCFGPF(LCDCTLL, 128, 8),
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfpwm.0", 36, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfwdt.0", 38, MCF_CLK);
+DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
+DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcflcd.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "sdram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "ssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+
+DEFINE_CLK(1, "mdha.0", 32, MCF_CLK);
+DEFINE_CLK(1, "skha.0", 33, MCF_CLK);
+DEFINE_CLK(1, "rng.0", 34, MCF_CLK);
+
+struct clk *mcf_clks[] = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_8, /* mcfcan.0 */
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_19, /* intc.1 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_34, /* mcfpit.2 */
+ &__clk_0_35, /* mcfpit.3 */
+ &__clk_0_36, /* mcfpwm.0 */
+ &__clk_0_37, /* mcfeport.0 */
+ &__clk_0_38, /* mcfwdt.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_42, /* mcfrtc.0 */
+ &__clk_0_43, /* mcflcd.0 */
+ &__clk_0_44, /* mcfusb-otg.0 */
+ &__clk_0_45, /* mcfusb-host.0 */
+ &__clk_0_46, /* sdram.0 */
+ &__clk_0_47, /* ssi.0 */
+ &__clk_0_48, /* pll.0 */
+
+ &__clk_1_32, /* mdha.0 */
+ &__clk_1_33, /* skha.0 */
+ &__clk_1_34, /* rng.0 */
+ NULL,
+};
+
+static struct clk * const enable_clks[] __initconst = {
+ &__clk_0_2, /* flexbus */
+ &__clk_0_18, /* intc.0 */
+ &__clk_0_19, /* intc.1 */
+ &__clk_0_21, /* iack.0 */
+ &__clk_0_24, /* mcfuart.0 */
+ &__clk_0_25, /* mcfuart.1 */
+ &__clk_0_26, /* mcfuart.2 */
+
+ &__clk_0_32, /* mcfpit.0 */
+ &__clk_0_33, /* mcfpit.1 */
+ &__clk_0_37, /* mcfeport.0 */
+ &__clk_0_40, /* sys.0 */
+ &__clk_0_41, /* gpio.0 */
+ &__clk_0_46, /* sdram.0 */
+ &__clk_0_48, /* pll.0 */
+};
+
+static struct clk * const disable_clks[] __initconst = {
+ &__clk_0_8, /* mcfcan.0 */
+ &__clk_0_12, /* fec.0 */
+ &__clk_0_17, /* edma */
+ &__clk_0_22, /* mcfi2c.0 */
+ &__clk_0_23, /* mcfqspi.0 */
+ &__clk_0_28, /* mcftmr.0 */
+ &__clk_0_29, /* mcftmr.1 */
+ &__clk_0_30, /* mcftmr.2 */
+ &__clk_0_31, /* mcftmr.3 */
+ &__clk_0_34, /* mcfpit.2 */
+ &__clk_0_35, /* mcfpit.3 */
+ &__clk_0_36, /* mcfpwm.0 */
+ &__clk_0_38, /* mcfwdt.0 */
+ &__clk_0_42, /* mcfrtc.0 */
+ &__clk_0_43, /* mcflcd.0 */
+ &__clk_0_44, /* mcfusb-otg.0 */
+ &__clk_0_45, /* mcfusb-host.0 */
+ &__clk_0_47, /* ssi.0 */
+ &__clk_1_32, /* mdha.0 */
+ &__clk_1_33, /* skha.0 */
+ &__clk_1_34, /* rng.0 */
};
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+static void __init m532x_clk_init(void)
+{
+ unsigned i;
+
+ /* make sure these clocks are enabled */
+ for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+ __clk_init_enabled(enable_clks[i]);
+ /* make sure these clocks are disabled */
+ for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+ __clk_init_disabled(disable_clks[i]);
+}
/***************************************************************************/
memset(commandp, 0, size);
}
#endif
-
mach_sched_init = hw_timer_init;
+ m532x_clk_init();
m532x_uarts_init();
m532x_fec_init();
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
/***************************************************************************/
--- /dev/null
+/*
+ * m5441x.c -- support for Coldfire m5441x processors
+ *
+ * (C) Copyright Steven King <sfking@fdwdc.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfdma.h>
+#include <asm/mcfclk.h>
+
+DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "mcfcan.1", 9, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.1", 14, MCF_CLK);
+DEFINE_CLK(0, "mcfdspi.1", 15, MCF_CLK);
+DEFINE_CLK(0, "edma", 17, MCF_CLK);
+DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
+DEFINE_CLK(0, "intc.1", 19, MCF_CLK);
+DEFINE_CLK(0, "intc.2", 20, MCF_CLK);
+DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK);
+DEFINE_CLK(0, "mcfdspi.0", 23, MCF_CLK);
+DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
+DEFINE_CLK(0, "mcfuart.3", 27, MCF_BUSCLK);
+DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
+DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.2", 34, MCF_CLK);
+DEFINE_CLK(0, "mcfpit.3", 35, MCF_CLK);
+DEFINE_CLK(0, "mcfeport.0", 37, MCF_CLK);
+DEFINE_CLK(0, "mcfadc.0", 38, MCF_CLK);
+DEFINE_CLK(0, "mcfdac.0", 39, MCF_CLK);
+DEFINE_CLK(0, "mcfrtc.0", 42, MCF_CLK);
+DEFINE_CLK(0, "mcfsim.0", 43, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-otg.0", 44, MCF_CLK);
+DEFINE_CLK(0, "mcfusb-host.0", 45, MCF_CLK);
+DEFINE_CLK(0, "mcfddr-sram.0", 46, MCF_CLK);
+DEFINE_CLK(0, "mcfssi.0", 47, MCF_CLK);
+DEFINE_CLK(0, "pll.0", 48, MCF_CLK);
+DEFINE_CLK(0, "mcfrng.0", 49, MCF_CLK);
+DEFINE_CLK(0, "mcfssi.1", 50, MCF_CLK);
+DEFINE_CLK(0, "mcfsdhc.0", 51, MCF_CLK);
+DEFINE_CLK(0, "enet-fec.0", 53, MCF_CLK);
+DEFINE_CLK(0, "enet-fec.1", 54, MCF_CLK);
+DEFINE_CLK(0, "switch.0", 55, MCF_CLK);
+DEFINE_CLK(0, "switch.1", 56, MCF_CLK);
+DEFINE_CLK(0, "nand.0", 63, MCF_CLK);
+
+DEFINE_CLK(1, "mcfow.0", 2, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.2", 4, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.3", 5, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.4", 6, MCF_CLK);
+DEFINE_CLK(1, "mcfi2c.5", 7, MCF_CLK);
+DEFINE_CLK(1, "mcfuart.4", 24, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.5", 25, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.6", 26, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.7", 27, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.8", 28, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfuart.9", 29, MCF_BUSCLK);
+DEFINE_CLK(1, "mcfpwm.0", 34, MCF_BUSCLK);
+DEFINE_CLK(1, "sys.0", 36, MCF_BUSCLK);
+DEFINE_CLK(1, "gpio.0", 37, MCF_BUSCLK);
+
+struct clk *mcf_clks[] = {
+ &__clk_0_2,
+ &__clk_0_8,
+ &__clk_0_9,
+ &__clk_0_14,
+ &__clk_0_15,
+ &__clk_0_17,
+ &__clk_0_18,
+ &__clk_0_19,
+ &__clk_0_20,
+ &__clk_0_22,
+ &__clk_0_23,
+ &__clk_0_24,
+ &__clk_0_25,
+ &__clk_0_26,
+ &__clk_0_27,
+ &__clk_0_28,
+ &__clk_0_29,
+ &__clk_0_30,
+ &__clk_0_31,
+ &__clk_0_32,
+ &__clk_0_33,
+ &__clk_0_34,
+ &__clk_0_35,
+ &__clk_0_37,
+ &__clk_0_38,
+ &__clk_0_39,
+ &__clk_0_42,
+ &__clk_0_43,
+ &__clk_0_44,
+ &__clk_0_45,
+ &__clk_0_46,
+ &__clk_0_47,
+ &__clk_0_48,
+ &__clk_0_49,
+ &__clk_0_50,
+ &__clk_0_51,
+ &__clk_0_53,
+ &__clk_0_54,
+ &__clk_0_55,
+ &__clk_0_56,
+ &__clk_0_63,
+
+ &__clk_1_2,
+ &__clk_1_4,
+ &__clk_1_5,
+ &__clk_1_6,
+ &__clk_1_7,
+ &__clk_1_24,
+ &__clk_1_25,
+ &__clk_1_26,
+ &__clk_1_27,
+ &__clk_1_28,
+ &__clk_1_29,
+ &__clk_1_34,
+ &__clk_1_36,
+ &__clk_1_37,
+ NULL,
+};
+
+
+static struct clk * const enable_clks[] __initconst = {
+ /* make sure these clocks are enabled */
+ &__clk_0_18, /* intc0 */
+ &__clk_0_19, /* intc0 */
+ &__clk_0_20, /* intc0 */
+ &__clk_0_24, /* uart0 */
+ &__clk_0_25, /* uart1 */
+ &__clk_0_26, /* uart2 */
+ &__clk_0_27, /* uart3 */
+
+ &__clk_0_33, /* pit.1 */
+ &__clk_0_37, /* eport */
+ &__clk_0_48, /* pll */
+
+ &__clk_1_36, /* CCM/reset module/Power management */
+ &__clk_1_37, /* gpio */
+};
+static struct clk * const disable_clks[] __initconst = {
+ &__clk_0_8, /* can.0 */
+ &__clk_0_9, /* can.1 */
+ &__clk_0_14, /* i2c.1 */
+ &__clk_0_15, /* dspi.1 */
+ &__clk_0_17, /* eDMA */
+ &__clk_0_22, /* i2c.0 */
+ &__clk_0_23, /* dspi.0 */
+ &__clk_0_28, /* tmr.1 */
+ &__clk_0_29, /* tmr.2 */
+ &__clk_0_30, /* tmr.2 */
+ &__clk_0_31, /* tmr.3 */
+ &__clk_0_32, /* pit.0 */
+ &__clk_0_34, /* pit.2 */
+ &__clk_0_35, /* pit.3 */
+ &__clk_0_38, /* adc */
+ &__clk_0_39, /* dac */
+ &__clk_0_44, /* usb otg */
+ &__clk_0_45, /* usb host */
+ &__clk_0_47, /* ssi.0 */
+ &__clk_0_49, /* rng */
+ &__clk_0_50, /* ssi.1 */
+ &__clk_0_51, /* eSDHC */
+ &__clk_0_53, /* enet-fec */
+ &__clk_0_54, /* enet-fec */
+ &__clk_0_55, /* switch.0 */
+ &__clk_0_56, /* switch.1 */
+
+ &__clk_1_2, /* 1-wire */
+ &__clk_1_4, /* i2c.2 */
+ &__clk_1_5, /* i2c.3 */
+ &__clk_1_6, /* i2c.4 */
+ &__clk_1_7, /* i2c.5 */
+ &__clk_1_24, /* uart 4 */
+ &__clk_1_25, /* uart 5 */
+ &__clk_1_26, /* uart 6 */
+ &__clk_1_27, /* uart 7 */
+ &__clk_1_28, /* uart 8 */
+ &__clk_1_29, /* uart 9 */
+};
+
+static void __init m5441x_clk_init(void)
+{
+ unsigned i;
+
+ for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
+ __clk_init_enabled(enable_clks[i]);
+ /* make sure these clocks are disabled */
+ for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
+ __clk_init_disabled(disable_clks[i]);
+}
+
+static void __init m5441x_uarts_init(void)
+{
+ __raw_writeb(0x0f, MCFGPIO_PAR_UART0);
+ __raw_writeb(0x00, MCFGPIO_PAR_UART1);
+ __raw_writeb(0x00, MCFGPIO_PAR_UART2);
+}
+
+static void __init m5441x_fec_init(void)
+{
+ __raw_writeb(0x03, MCFGPIO_PAR_FEC);
+}
+
+void __init config_BSP(char *commandp, int size)
+{
+ m5441x_clk_init();
+ mach_sched_init = hw_timer_init;
+ m5441x_uarts_init();
+ m5441x_fec_init();
+}
+
+
+#if IS_ENABLED(CONFIG_RTC_DRV_M5441x)
+static struct resource m5441x_rtc_resources[] = {
+ {
+ .start = MCFRTC_BASE,
+ .end = MCFRTC_BASE + MCFRTC_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MCF_IRQ_RTC,
+ .end = MCF_IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device m5441x_rtc = {
+ .name = "mcfrtc",
+ .id = 0,
+ .resource = m5441x_rtc_resources,
+ .num_resources = ARRAY_SIZE(m5441x_rtc_resources),
+};
+#endif
+
+static struct platform_device *m5441x_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_RTC_DRV_M5441x)
+ &m5441x_rtc,
+#endif
+};
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m5441x_devices, ARRAY_SIZE(m5441x_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
#include <asm/m54xxsim.h>
#include <asm/mcfuart.h>
#include <asm/m54xxgpt.h>
-#include <asm/mcfgpio.h>
#ifdef CONFIG_MMU
#include <asm/mmu_context.h>
#endif
/***************************************************************************/
-struct mcf_gpio_chip mcf_gpio_chips[] = { };
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
static void __init m54xx_uarts_init(void)
{
/* enable io pins */
--- /dev/null
+/*
+ * mcf8390.c -- platform support for 8390 ethernet on many boards
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/platform_device.h>
+#include <asm/mcf8390.h>
+
+static struct resource mcf8390_resources[] = {
+ {
+ .start = NE2000_ADDR,
+ .end = NE2000_ADDR + NE2000_ADDRSIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NE2000_IRQ_VECTOR,
+ .end = NE2000_IRQ_VECTOR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int __init mcf8390_platform_init(void)
+{
+ platform_device_register_simple("mcf8390", -1, mcf8390_resources,
+ ARRAY_SIZE(mcf8390_resources));
+ return 0;
+}
+
+arch_initcall(mcf8390_platform_init);
--- /dev/null
+/*
+ * pci.c -- PCI bus support for ColdFire processors
+ *
+ * (C) Copyright 2012, Greg Ungerer <gerg@uclinux.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/m54xxpci.h>
+
+/*
+ * Memory and IO mappings. We use a 1:1 mapping for local host memory to
+ * PCI bus memory (no reason not to really). IO space doesn't matter, we
+ * always use access functions for that. The device configuration space is
+ * mapped over the IO map space when we enable it in the PCICAR register.
+ */
+#define PCI_MEM_PA 0xf0000000 /* Host physical address */
+#define PCI_MEM_BA 0xf0000000 /* Bus physical address */
+#define PCI_MEM_SIZE 0x08000000 /* 128 MB */
+#define PCI_MEM_MASK (PCI_MEM_SIZE - 1)
+
+#define PCI_IO_PA 0xf8000000 /* Host physical address */
+#define PCI_IO_BA 0x00000000 /* Bus physical address */
+#define PCI_IO_SIZE 0x00010000 /* 64k */
+#define PCI_IO_MASK (PCI_IO_SIZE - 1)
+
+static struct pci_bus *rootbus;
+static unsigned long iospace;
+
+/*
+ * We need to be carefull probing on bus 0 (directly connected to host
+ * bridge). We should only acccess the well defined possible devices in
+ * use, ignore aliases and the like.
+ */
+static unsigned char mcf_host_slot2sid[32] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 1, 2, 0, 3, 4, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+};
+
+static unsigned char mcf_host_irq[] = {
+ 0, 69, 69, 71, 71,
+};
+
+
+static inline void syncio(void)
+{
+ /* The ColdFire "nop" instruction waits for all bus IO to complete */
+ __asm__ __volatile__ ("nop");
+}
+
+/*
+ * Configuration space access functions. Configuration space access is
+ * through the IO mapping window, enabling it via the PCICAR register.
+ */
+static unsigned long mcf_mk_pcicar(int bus, unsigned int devfn, int where)
+{
+ return (bus << PCICAR_BUSN) | (devfn << PCICAR_DEVFNN) | (where & 0xfc);
+}
+
+static int mcf_pci_readconfig(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *value)
+{
+ unsigned long addr;
+
+ *value = 0xffffffff;
+
+ if (bus->number == 0) {
+ if (mcf_host_slot2sid[PCI_SLOT(devfn)] == 0)
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ syncio();
+ addr = mcf_mk_pcicar(bus->number, devfn, where);
+ __raw_writel(PCICAR_E | addr, PCICAR);
+ addr = iospace + (where & 0x3);
+
+ switch (size) {
+ case 1:
+ *value = __raw_readb(addr);
+ break;
+ case 2:
+ *value = le16_to_cpu(__raw_readw(addr));
+ break;
+ default:
+ *value = le32_to_cpu(__raw_readl(addr));
+ break;
+ }
+
+ syncio();
+ __raw_writel(0, PCICAR);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ unsigned long addr;
+
+ if (bus->number == 0) {
+ if (mcf_host_slot2sid[PCI_SLOT(devfn)] == 0)
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ syncio();
+ addr = mcf_mk_pcicar(bus->number, devfn, where);
+ __raw_writel(PCICAR_E | addr, PCICAR);
+ addr = iospace + (where & 0x3);
+
+ switch (size) {
+ case 1:
+ __raw_writeb(value, addr);
+ break;
+ case 2:
+ __raw_writew(cpu_to_le16(value), addr);
+ break;
+ default:
+ __raw_writel(cpu_to_le32(value), addr);
+ break;
+ }
+
+ syncio();
+ __raw_writel(0, PCICAR);
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops mcf_pci_ops = {
+ .read = mcf_pci_readconfig,
+ .write = mcf_pci_writeconfig,
+};
+
+/*
+ * IO address space access functions. Pretty strait forward, these are
+ * directly mapped in to the IO mapping window. And that is mapped into
+ * virtual address space.
+ */
+u8 mcf_pci_inb(u32 addr)
+{
+ return __raw_readb(iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_inb);
+
+u16 mcf_pci_inw(u32 addr)
+{
+ return le16_to_cpu(__raw_readw(iospace + (addr & PCI_IO_MASK)));
+}
+EXPORT_SYMBOL(mcf_pci_inw);
+
+u32 mcf_pci_inl(u32 addr)
+{
+ return le32_to_cpu(__raw_readl(iospace + (addr & PCI_IO_MASK)));
+}
+EXPORT_SYMBOL(mcf_pci_inl);
+
+void mcf_pci_insb(u32 addr, u8 *buf, u32 len)
+{
+ for (; len; len--)
+ *buf++ = mcf_pci_inb(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insb);
+
+void mcf_pci_insw(u32 addr, u16 *buf, u32 len)
+{
+ for (; len; len--)
+ *buf++ = mcf_pci_inw(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insw);
+
+void mcf_pci_insl(u32 addr, u32 *buf, u32 len)
+{
+ for (; len; len--)
+ *buf++ = mcf_pci_inl(addr);
+}
+EXPORT_SYMBOL(mcf_pci_insl);
+
+void mcf_pci_outb(u8 v, u32 addr)
+{
+ __raw_writeb(v, iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outb);
+
+void mcf_pci_outw(u16 v, u32 addr)
+{
+ __raw_writew(cpu_to_le16(v), iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outw);
+
+void mcf_pci_outl(u32 v, u32 addr)
+{
+ __raw_writel(cpu_to_le32(v), iospace + (addr & PCI_IO_MASK));
+}
+EXPORT_SYMBOL(mcf_pci_outl);
+
+void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len)
+{
+ for (; len; len--)
+ mcf_pci_outb(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsb);
+
+void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len)
+{
+ for (; len; len--)
+ mcf_pci_outw(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsw);
+
+void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len)
+{
+ for (; len; len--)
+ mcf_pci_outl(*buf++, addr);
+}
+EXPORT_SYMBOL(mcf_pci_outsl);
+
+/*
+ * Initialize the PCI bus registers, and scan the bus.
+ */
+static struct resource mcf_pci_mem = {
+ .name = "PCI Memory space",
+ .start = PCI_MEM_PA,
+ .end = PCI_MEM_PA + PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource mcf_pci_io = {
+ .name = "PCI IO space",
+ .start = 0x400,
+ .end = 0x10000 - 1,
+ .flags = IORESOURCE_IO,
+};
+
+/*
+ * Interrupt mapping and setting.
+ */
+static int mcf_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int sid;
+
+ sid = mcf_host_slot2sid[slot];
+ if (sid)
+ return mcf_host_irq[sid];
+ return 0;
+}
+
+static int __init mcf_pci_init(void)
+{
+ pr_info("ColdFire: PCI bus initialization...\n");
+
+ /* Reset the external PCI bus */
+ __raw_writel(PCIGSCR_RESET, PCIGSCR);
+ __raw_writel(0, PCITCR);
+
+ request_resource(&iomem_resource, &mcf_pci_mem);
+ request_resource(&iomem_resource, &mcf_pci_io);
+
+ /* Configure PCI arbiter */
+ __raw_writel(PACR_INTMPRI | PACR_INTMINTE | PACR_EXTMPRI(0x1f) |
+ PACR_EXTMINTE(0x1f), PACR);
+
+ /* Set required multi-function pins for PCI bus use */
+ __raw_writew(0x3ff, MCF_PAR_PCIBG);
+ __raw_writew(0x3ff, MCF_PAR_PCIBR);
+
+ /* Set up config space for local host bus controller */
+ __raw_writel(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_INVALIDATE, PCISCR);
+ __raw_writel(PCICR1_LT(32) | PCICR1_CL(8), PCICR1);
+ __raw_writel(0, PCICR2);
+
+ /*
+ * Set up the initiator windows for memory and IO mapping.
+ * These give the CPU bus access onto the PCI bus. One for each of
+ * PCI memory and IO address spaces.
+ */
+ __raw_writel(WXBTAR(PCI_MEM_PA, PCI_MEM_BA, PCI_MEM_SIZE),
+ PCIIW0BTAR);
+ __raw_writel(WXBTAR(PCI_IO_PA, PCI_IO_BA, PCI_IO_SIZE),
+ PCIIW1BTAR);
+ __raw_writel(PCIIWCR_W0_MEM /*| PCIIWCR_W0_MRDL*/ | PCIIWCR_W0_E |
+ PCIIWCR_W1_IO | PCIIWCR_W1_E, PCIIWCR);
+
+ /*
+ * Set up the target windows for access from the PCI bus back to the
+ * CPU bus. All we need is access to system RAM (for mastering).
+ */
+ __raw_writel(CONFIG_RAMBASE, PCIBAR1);
+ __raw_writel(CONFIG_RAMBASE | PCITBATR1_E, PCITBATR1);
+
+ /* Keep a virtual mapping to IO/config space active */
+ iospace = (unsigned long) ioremap(PCI_IO_PA, PCI_IO_SIZE);
+ if (iospace == 0)
+ return -ENODEV;
+ pr_info("Coldfire: PCI IO/config window mapped to 0x%x\n",
+ (u32) iospace);
+
+ /* Turn of PCI reset, and wait for devices to settle */
+ __raw_writel(0, PCIGSCR);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(msecs_to_jiffies(200));
+
+ rootbus = pci_scan_bus(0, &mcf_pci_ops, NULL);
+ rootbus->resource[0] = &mcf_pci_io;
+ rootbus->resource[1] = &mcf_pci_mem;
+
+ pci_fixup_irqs(pci_common_swizzle, mcf_pci_map_irq);
+ pci_bus_size_bridges(rootbus);
+ pci_bus_assign_resources(rootbus);
+ pci_enable_bridges(rootbus);
+ pci_bus_add_devices(rootbus);
+ return 0;
+}
+
+subsys_initcall(mcf_pci_init);
+++ /dev/null
-/*
- * Coldfire generic GPIO pinmux support.
- *
- * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-
-#include <asm/pinmux.h>
-
-int mcf_pinmux_request(unsigned pinmux, unsigned func)
-{
- return 0;
-}
-
-void mcf_pinmux_release(unsigned pinmux, unsigned func)
-{
-}
.set_mode = init_cf_pit_timer,
.set_next_event = cf_pit_next_event,
.shift = 32,
- .irq = MCFINT_VECBASE + MCFINT_PIT1,
+ .irq = MCF_IRQ_PIT1,
};
clockevent_delta2ns(0x3f, &cf_pit_clockevent);
clockevents_register_device(&cf_pit_clockevent);
- setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
+ setup_irq(MCF_IRQ_PIT1, &pit_irq);
clocksource_register_hz(&pit_clk, FREQ);
}
*/
void coldfire_profile_init(void);
-#if defined(CONFIG_M532x)
+#if defined(CONFIG_M532x) || defined(CONFIG_M5441x)
#define __raw_readtrr __raw_readl
#define __raw_writetrr __raw_writel
#else
config SPI_COLDFIRE_QSPI
tristate "Freescale Coldfire QSPI controller"
- depends on (M520x || M523x || M5249 || M527x || M528x || M532x)
+ depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
help
This enables support for the Coldfire QSPI controller in master
mode.
projects / mirror_ubuntu-jammy-kernel.git / commitdiff