return ret;
}
+static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u32 valid_add_flags;
+ u32 valid_drop_flags;
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ /* Ignore the slot flag (bit 0), and the default control endpoint flag
+ * (bit 1). The default control endpoint is added during the Address
+ * Device command and is never removed until the slot is disabled.
+ */
+ valid_add_flags = ctrl_ctx->add_flags >> 2;
+ valid_drop_flags = ctrl_ctx->drop_flags >> 2;
+
+ /* Use hweight32 to count the number of ones in the add flags, or
+ * number of endpoints added. Don't count endpoints that are changed
+ * (both added and dropped).
+ */
+ return hweight32(valid_add_flags) -
+ hweight32(valid_add_flags & valid_drop_flags);
+}
+
+static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u32 valid_add_flags;
+ u32 valid_drop_flags;
+
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+ valid_add_flags = ctrl_ctx->add_flags >> 2;
+ valid_drop_flags = ctrl_ctx->drop_flags >> 2;
+
+ return hweight32(valid_drop_flags) -
+ hweight32(valid_add_flags & valid_drop_flags);
+}
+
+/*
+ * We need to reserve the new number of endpoints before the configure endpoint
+ * command completes. We can't subtract the dropped endpoints from the number
+ * of active endpoints until the command completes because we can oversubscribe
+ * the host in this case:
+ *
+ * - the first configure endpoint command drops more endpoints than it adds
+ * - a second configure endpoint command that adds more endpoints is queued
+ * - the first configure endpoint command fails, so the config is unchanged
+ * - the second command may succeed, even though there isn't enough resources
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ u32 added_eps;
+
+ added_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
+ if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) {
+ xhci_dbg(xhci, "Not enough ep ctxs: "
+ "%u active, need to add %u, limit is %u.\n",
+ xhci->num_active_eps, added_eps,
+ xhci->limit_active_eps);
+ return -ENOMEM;
+ }
+ xhci->num_active_eps += added_eps;
+ xhci_dbg(xhci, "Adding %u ep ctxs, %u now active.\n", added_eps,
+ xhci->num_active_eps);
+ return 0;
+}
+
+/*
+ * The configure endpoint was failed by the xHC for some other reason, so we
+ * need to revert the resources that failed configuration would have used.
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_free_host_resources(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ u32 num_failed_eps;
+
+ num_failed_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
+ xhci->num_active_eps -= num_failed_eps;
+ xhci_dbg(xhci, "Removing %u failed ep ctxs, %u now active.\n",
+ num_failed_eps,
+ xhci->num_active_eps);
+}
+
+/*
+ * Now that the command has completed, clean up the active endpoint count by
+ * subtracting out the endpoints that were dropped (but not changed).
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *in_ctx)
+{
+ u32 num_dropped_eps;
+
+ num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, in_ctx);
+ xhci->num_active_eps -= num_dropped_eps;
+ if (num_dropped_eps)
+ xhci_dbg(xhci, "Removing %u dropped ep ctxs, %u now active.\n",
+ num_dropped_eps,
+ xhci->num_active_eps);
+}
+
/* Issue a configure endpoint command or evaluate context command
* and wait for it to finish.
*/
virt_dev = xhci->devs[udev->slot_id];
if (command) {
in_ctx = command->in_ctx;
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+ xhci_reserve_host_resources(xhci, in_ctx)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough host resources, "
+ "active endpoint contexts = %u\n",
+ xhci->num_active_eps);
+ return -ENOMEM;
+ }
+
cmd_completion = command->completion;
cmd_status = &command->status;
command->command_trb = xhci->cmd_ring->enqueue;
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
} else {
in_ctx = virt_dev->in_ctx;
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+ xhci_reserve_host_resources(xhci, in_ctx)) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough host resources, "
+ "active endpoint contexts = %u\n",
+ xhci->num_active_eps);
+ return -ENOMEM;
+ }
cmd_completion = &virt_dev->cmd_completion;
cmd_status = &virt_dev->cmd_status;
}
if (ret < 0) {
if (command)
list_del(&command->cmd_list);
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+ xhci_free_host_resources(xhci, in_ctx);
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
return -ENOMEM;
}
if (!ctx_change)
- return xhci_configure_endpoint_result(xhci, udev, cmd_status);
- return xhci_evaluate_context_result(xhci, udev, cmd_status);
+ ret = xhci_configure_endpoint_result(xhci, udev, cmd_status);
+ else
+ ret = xhci_evaluate_context_result(xhci, udev, cmd_status);
+
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* If the command failed, remove the reserved resources.
+ * Otherwise, clean up the estimate to include dropped eps.
+ */
+ if (ret)
+ xhci_free_host_resources(xhci, in_ctx);
+ else
+ xhci_finish_resource_reservation(xhci, in_ctx);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+ return ret;
}
/* Called after one or more calls to xhci_add_endpoint() or
return 0;
}
+/*
+ * Deletes endpoint resources for endpoints that were active before a Reset
+ * Device command, or a Disable Slot command. The Reset Device command leaves
+ * the control endpoint intact, whereas the Disable Slot command deletes it.
+ *
+ * Must be called with xhci->lock held.
+ */
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+ struct xhci_virt_device *virt_dev, bool drop_control_ep)
+{
+ int i;
+ unsigned int num_dropped_eps = 0;
+ unsigned int drop_flags = 0;
+
+ for (i = (drop_control_ep ? 0 : 1); i < 31; i++) {
+ if (virt_dev->eps[i].ring) {
+ drop_flags |= 1 << i;
+ num_dropped_eps++;
+ }
+ }
+ xhci->num_active_eps -= num_dropped_eps;
+ if (num_dropped_eps)
+ xhci_dbg(xhci, "Dropped %u ep ctxs, flags = 0x%x, "
+ "%u now active.\n",
+ num_dropped_eps, drop_flags,
+ xhci->num_active_eps);
+}
+
/*
* This submits a Reset Device Command, which will set the device state to 0,
* set the device address to 0, and disable all the endpoints except the default
goto command_cleanup;
}
+ /* Free up host controller endpoint resources */
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ /* Don't delete the default control endpoint resources */
+ xhci_free_device_endpoint_resources(xhci, virt_dev, false);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+
/* Everything but endpoint 0 is disabled, so free or cache the rings. */
last_freed_endpoint = 1;
for (i = 1; i < 31; ++i) {
*/
}
+/*
+ * Checks if we have enough host controller resources for the default control
+ * endpoint.
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci)
+{
+ if (xhci->num_active_eps + 1 > xhci->limit_active_eps) {
+ xhci_dbg(xhci, "Not enough ep ctxs: "
+ "%u active, need to add 1, limit is %u.\n",
+ xhci->num_active_eps, xhci->limit_active_eps);
+ return -ENOMEM;
+ }
+ xhci->num_active_eps += 1;
+ xhci_dbg(xhci, "Adding 1 ep ctx, %u now active.\n",
+ xhci->num_active_eps);
+ return 0;
+}
+
+
/*
* Returns 0 if the xHC ran out of device slots, the Enable Slot command
* timed out, or allocating memory failed. Returns 1 on success.
xhci_err(xhci, "Error while assigning device slot ID\n");
return 0;
}
- /* xhci_alloc_virt_device() does not touch rings; no need to lock.
- * Use GFP_NOIO, since this function can be called from
+
+ if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_reserve_host_control_ep_resources(xhci);
+ if (ret) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_warn(xhci, "Not enough host resources, "
+ "active endpoint contexts = %u\n",
+ xhci->num_active_eps);
+ goto disable_slot;
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ }
+ /* Use GFP_NOIO, since this function can be called from
* xhci_discover_or_reset_device(), which may be called as part of
* mass storage driver error handling.
*/
if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
- /* Disable slot, if we can do it without mem alloc */
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
- spin_lock_irqsave(&xhci->lock, flags);
- if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
- xhci_ring_cmd_db(xhci);
- spin_unlock_irqrestore(&xhci->lock, flags);
- return 0;
+ goto disable_slot;
}
udev->slot_id = xhci->slot_id;
/* Is this a LS or FS device under a HS hub? */
/* Hub or peripherial? */
return 1;
+
+disable_slot:
+ /* Disable slot, if we can do it without mem alloc */
+ spin_lock_irqsave(&xhci->lock, flags);
+ if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
+ xhci_ring_cmd_db(xhci);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return 0;
}
/*
projects / mirror_ubuntu-disco-kernel.git / commitdiff