Get rid of boot messages and put in correct place.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
return result;
}
-
-static int bcm_init(void)
-{
- printk(KERN_INFO "%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
- printk(KERN_INFO "%s\n", DRV_COPYRIGHT);
-
- return InterfaceInitialize();
-}
-
-
-static void bcm_exit(void)
-{
- InterfaceExit();
-}
-
-module_init(bcm_init);
-module_exit(bcm_exit);
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE ("GPL");
-
status = InitCardAndDownloadFirmware(psIntfAdapter->psAdapter);
if(status != STATUS_SUCCESS)
{
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "InitCardAndDownloadFirmware failed.\n");
+ pr_err(DRV_NAME "InitCardAndDownloadFirmware failed.\n");
return status;
}
if(TRUE == psIntfAdapter->psAdapter->fw_download_done)
{
-
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Sending first interrupt URB down......");
if(StartInterruptUrb(psIntfAdapter))
{
BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Cannot send interrupt in URB");
psIntfAdapter->psAdapter->waiting_to_fw_download_done, 5*HZ);
if(value == 0)
- {
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,"Mailbox Interrupt has not reached to Driver..");
- }
- else
- {
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,"Got the mailbox interrupt ...Registering control interface...\n ");
- }
+ pr_err(DRV_NAME ": Mailbox Interrupt has not reached to Driver..\n");
+
if(register_control_device_interface(psIntfAdapter->psAdapter) < 0)
{
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Register Control Device failed...");
+ pr_err(DRV_NAME ": Register Control Device failed...\n");
return -EIO;
}
}
UINT uiData = 0;
/* Store the usb dev into interface adapter */
- psIntfAdapter->udev = usb_get_dev(interface_to_usbdev(
- psIntfAdapter->interface));
-
- if((psIntfAdapter->udev->speed == USB_SPEED_HIGH))
- {
- psIntfAdapter->bHighSpeedDevice = TRUE ;
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "MODEM IS CONFIGURED TO HIGH_SPEED ");
- }
- else
- {
- psIntfAdapter->bHighSpeedDevice = FALSE ;
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "MODEM IS CONFIGURED TO FULL_SPEED ");
- }
+ psIntfAdapter->udev = usb_get_dev(interface_to_usbdev(psIntfAdapter->interface));
+ psIntfAdapter->bHighSpeedDevice = (psIntfAdapter->udev->speed == USB_SPEED_HIGH);
psIntfAdapter->psAdapter->interface_rdm = BcmRDM;
psIntfAdapter->psAdapter->interface_wrm = BcmWRM;
BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "CHIP ID Read Failed\n");
return STATUS_FAILURE;
}
- if(0xbece3200==(psIntfAdapter->psAdapter->chip_id&~(0xF0)))
- {
- psIntfAdapter->psAdapter->chip_id=(psIntfAdapter->psAdapter->chip_id&~(0xF0));
- }
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "First RDM Chip ID 0x%lx\n", psIntfAdapter->psAdapter->chip_id);
+ if(0xbece3200==(psIntfAdapter->psAdapter->chip_id&~(0xF0)))
+ psIntfAdapter->psAdapter->chip_id &= ~0xF0;
- iface_desc = psIntfAdapter->interface->cur_altsetting;
- //print_usb_interface_desc(&(iface_desc->desc));
+ dev_info(&psIntfAdapter->udev->dev, "RDM Chip ID 0x%lx\n",
+ psIntfAdapter->psAdapter->chip_id);
+
+ iface_desc = psIntfAdapter->interface->cur_altsetting;
if(psIntfAdapter->psAdapter->chip_id == T3B)
{
-
//
//T3B device will have EEPROM,check if EEPROM is proper and BCM16 can be done or not.
//
BeceemEEPROMBulkRead(psIntfAdapter->psAdapter,&uiData,0x0,4);
if(uiData == BECM)
- {
bBcm16 = TRUE;
- }
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Number of Altsetting aviailable for This Modem 0x%x\n", psIntfAdapter->interface->num_altsetting);
+
+ dev_info(&psIntfAdapter->udev->dev, "number of alternate setting %d\n",
+ psIntfAdapter->interface->num_altsetting);
+
if(bBcm16 == TRUE)
{
//selecting alternate setting one as a default setting for High Speed modem.
}
iface_desc = psIntfAdapter->interface->cur_altsetting;
- //print_usb_interface_desc(&(iface_desc->desc));
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Current number of endpoints :%x \n", iface_desc->desc.bNumEndpoints);
- for (value = 0; value < iface_desc->desc.bNumEndpoints; ++value)
+
+ for (value = 0; value < iface_desc->desc.bNumEndpoints; ++value)
{
- endpoint = &iface_desc->endpoint[value].desc;
- //print_usb_endpoint_descriptor(endpoint);
+ endpoint = &iface_desc->endpoint[value].desc;
if (!psIntfAdapter->sBulkIn.bulk_in_endpointAddr && bcm_usb_endpoint_is_bulk_in(endpoint))
{
psIntfAdapter->sIntrIn.int_in_buffer =
kmalloc(buffer_size, GFP_KERNEL);
if (!psIntfAdapter->sIntrIn.int_in_buffer) {
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Could not allocate interrupt_in_buffer");
+ dev_err(&psIntfAdapter->udev->dev,
+ "could not allocate interrupt_in_buffer\n");
return -EINVAL;
}
- //psIntfAdapter->sIntrIn.int_in_pipe =
}
if (!psIntfAdapter->sIntrOut.int_out_endpointAddr && bcm_usb_endpoint_is_int_out(endpoint))
psIntfAdapter->sIntrOut.int_out_buffer= kmalloc(buffer_size,
GFP_KERNEL);
if (!psIntfAdapter->sIntrOut.int_out_buffer)
- {
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Could not allocate interrupt_out_buffer");
- return -EINVAL;
- }
+ {
+ dev_err(&psIntfAdapter->udev->dev,
+ "could not allocate interrupt_out_buffer\n");
+ return -EINVAL;
+ }
}
}
}
static int InterfaceSuspend (struct usb_interface *intf, pm_message_t message)
{
PS_INTERFACE_ADAPTER psIntfAdapter = usb_get_intfdata(intf);
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "=================================\n");
- //Bcm_kill_all_URBs(psIntfAdapter);
+
psIntfAdapter->bSuspended = TRUE;
if(TRUE == psIntfAdapter->bPreparingForBusSuspend)
struct class *bcm_class;
-/*
-Function: InterfaceInitialize
-Description: This is the hardware specific initialization Function.
- Registering the driver with NDIS , other device specific NDIS
- and hardware initializations are done here.
-
-Input parameters: IN PMINI_ADAPTER Adapter - Miniport Adapter Context
-
-
-Return: BCM_STATUS_SUCCESS - If Initialization of the
- HW Interface was successful.
- Other - If an error occured.
-*/
-INT InterfaceInitialize(void)
+static __init int bcm_init(void)
{
+ printk(KERN_INFO "%s: %s, %s\n", DRV_NAME, DRV_DESCRIPTION, DRV_VERSION);
+ printk(KERN_INFO "%s\n", DRV_COPYRIGHT);
+
bcm_class = class_create(THIS_MODULE, DRV_NAME);
if (IS_ERR(bcm_class)) {
printk(KERN_ERR DRV_NAME ": could not create class\n");
return PTR_ERR(bcm_class);
}
+
return usb_register(&usbbcm_driver);
}
-INT InterfaceExit(void)
+static __exit void bcm_exit(void)
{
class_destroy (bcm_class);
+
usb_deregister(&usbbcm_driver);
- return 0;
}
+
+module_init(bcm_init);
+module_exit(bcm_exit);
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE ("GPL");
}
/* Cancel All submitted TX URB's */
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Cancelling All Submitted TX Urbs \n");
-
- for(i = 0; i < MAXIMUM_USB_TCB; i++)
+ for(i = 0; i < MAXIMUM_USB_TCB; i++)
{
tempUrb = psIntfAdapter->asUsbTcb[i].urb;
if(tempUrb)
}
}
-
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "Cancelling All submitted Rx Urbs \n");
-
for(i = 0; i < MAXIMUM_USB_RCB; i++)
{
tempUrb = psIntfAdapter->asUsbRcb[i].urb;
}
}
-
atomic_set(&psIntfAdapter->uNumTcbUsed, 0);
atomic_set(&psIntfAdapter->uCurrTcb, 0);
atomic_set(&psIntfAdapter->uNumRcbUsed, 0);
atomic_set(&psIntfAdapter->uCurrRcb, 0);
-
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "TCB: used- %d cur-%d\n", atomic_read(&psIntfAdapter->uNumTcbUsed), atomic_read(&psIntfAdapter->uCurrTcb));
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_PRINTK, 0, 0, "RCB: used- %d cur-%d\n", atomic_read(&psIntfAdapter->uNumRcbUsed), atomic_read(&psIntfAdapter->uCurrRcb));
-
}
VOID putUsbSuspend(struct work_struct *work)
if(psIntfAdapter->bSuspended == FALSE)
usb_autopm_put_interface(intf);
- else
- BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Interface Resumed Completely\n");
}
free_netdev(Adapter->dev);
}
-
-int create_worker_threads(PMINI_ADAPTER psAdapter)
+static int create_worker_threads(PMINI_ADAPTER psAdapter)
{
- const char *name = psAdapter->dev->name;
-
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Init Threads...");
// Rx Control Packets Processing
psAdapter->control_packet_handler = kthread_run((int (*)(void *))
- control_packet_handler, psAdapter, "%s-rx", name);
+ control_packet_handler, psAdapter, "%s-rx", DRV_NAME);
if(IS_ERR(psAdapter->control_packet_handler))
{
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "No Kernel Thread, but still returning success\n");
+ pr_notice(DRV_NAME ": could not create control thread\n");
return PTR_ERR(psAdapter->control_packet_handler);
}
+
// Tx Thread
psAdapter->transmit_packet_thread = kthread_run((int (*)(void *))
- tx_pkt_handler, psAdapter, "%s-tx", name);
+ tx_pkt_handler, psAdapter, "%s-tx", DRV_NAME);
if(IS_ERR (psAdapter->transmit_packet_thread))
{
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "No Kernel Thread, but still returning success");
+ pr_notice(DRV_NAME ": could not creat transmit thread\n");
kthread_stop(psAdapter->control_packet_handler);
return PTR_ERR(psAdapter->transmit_packet_thread);
}
return 0;
}
-
-static inline struct file *open_firmware_file(PMINI_ADAPTER Adapter, char *path)
+static struct file *open_firmware_file(PMINI_ADAPTER Adapter, char *path)
{
struct file *flp=NULL;
mm_segment_t oldfs;
set_fs(oldfs);
if(IS_ERR(flp))
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Unable To Open File %s, err %lx",
- path, PTR_ERR(flp));
- flp = NULL;
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Got file descriptor pointer of %s!",
- path);
+ pr_err(DRV_NAME "Unable To Open File %s, err %ld",
+ path, PTR_ERR(flp));
+ flp = NULL;
}
- if(Adapter->device_removed)
- {
- flp = NULL;
- }
+
+ if(Adapter->device_removed)
+ flp = NULL;
return flp;
}
if(flp && !(IS_ERR(flp)))
filp_close(flp, current->files);
set_fs(oldfs);
- do_gettimeofday(&tv);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "file download done at %lx", ((tv.tv_sec * 1000) +
- (tv.tv_usec/1000)));
+
return errorno;
}
* Firm/DDR Settings..
*/
- if((status = create_worker_threads(ps_adapter))<0)
- {
- BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Cannot create thread");
+ status = create_worker_threads(ps_adapter);
+ if (status<0)
return status;
- }
+
/*
* For Downloading the Firm, parse the cfg file first.
*/
status = ddr_init(ps_adapter);
if(status)
{
- BCM_DEBUG_PRINT (ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "ddr_init Failed\n");
+ pr_err(DRV_NAME "ddr_init Failed\n");
return status;
}
BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Error downloading CFG file");
goto OUT;
}
- BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "CFG file downloaded");
if(register_networkdev(ps_adapter))
{
goto OUT;
}
- BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "BIN file downloaded");
status = run_card_proc(ps_adapter);
if(status)
{
if(ntohl(Adapter->pstargetparams->m_u32PhyParameter2) & AUTO_SYNC_DISABLE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "AutoSyncup is Disabled\n");
+ pr_info(DRV_NAME ": AutoSyncup is Disabled\n");
Adapter->AutoSyncup = FALSE;
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "AutoSyncup is Enabled\n");
+ pr_info(DRV_NAME ": AutoSyncup is Enabled\n");
Adapter->AutoSyncup = TRUE;
}
+
if(ntohl(Adapter->pstargetparams->HostDrvrConfig6) & AUTO_LINKUP_ENABLE)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Enabling autolink up");
+ pr_info(DRV_NAME ": Enabling autolink up");
Adapter->AutoLinkUp = TRUE;
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Disabling autolink up");
+ pr_info(DRV_NAME ": Disabling autolink up");
Adapter->AutoLinkUp = FALSE;
}
// Setting the DDR Setting..
Adapter->ulPowerSaveMode =
(ntohl(Adapter->pstargetparams->HostDrvrConfig6)>>12)&0x0F;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT,DBG_LVL_ALL, "Power Save Mode: %lx\n",
- Adapter->ulPowerSaveMode);
+ pr_info(DRV_NAME ": DDR Setting: %x\n", Adapter->DDRSetting);
+ pr_info(DRV_NAME ": Power Save Mode: %lx\n", Adapter->ulPowerSaveMode);
if(ntohl(Adapter->pstargetparams->HostDrvrConfig6) & AUTO_FIRM_DOWNLOAD)
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Enabling Auto Firmware Download\n");
+ pr_info(DRV_NAME ": Enabling Auto Firmware Download\n");
Adapter->AutoFirmDld = TRUE;
}
else
{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Disabling Auto Firmware Download\n");
+ pr_info(DRV_NAME ": Disabling Auto Firmware Download\n");
Adapter->AutoFirmDld = FALSE;
}
uiHostDrvrCfg6 = ntohl(Adapter->pstargetparams->HostDrvrConfig6);
Adapter->bMipsConfig = (uiHostDrvrCfg6>>20)&0x01;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"MIPSConfig : 0x%X\n",Adapter->bMipsConfig);
+ pr_info(DRV_NAME ": MIPSConfig : 0x%X\n",Adapter->bMipsConfig);
//used for backward compatibility.
Adapter->bDPLLConfig = (uiHostDrvrCfg6>>19)&0x01;
Adapter->PmuMode= (uiHostDrvrCfg6 >> 24 ) & 0x03;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "PMU MODE: %x", Adapter->PmuMode);
+ pr_info(DRV_NAME ": PMU MODE: %x", Adapter->PmuMode);
if((uiHostDrvrCfg6 >> HOST_BUS_SUSPEND_BIT ) & (0x01))
{
Adapter->bDoSuspend = TRUE;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "Making DoSuspend TRUE as per configFile");
+ pr_info(DRV_NAME ": Making DoSuspend TRUE as per configFile");
}
uiEEPROMFlag = ntohl(Adapter->pstargetparams->m_u32EEPROMFlag);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "uiEEPROMFlag : 0x%X\n",uiEEPROMFlag);
+ pr_info(DRV_NAME ": uiEEPROMFlag : 0x%X\n",uiEEPROMFlag);
Adapter->eNVMType = (NVM_TYPE)((uiEEPROMFlag>>4)&0x3);
-
Adapter->bStatusWrite = (uiEEPROMFlag>>6)&0x1;
- //printk(("bStatusWrite : 0x%X\n", Adapter->bStatusWrite));
Adapter->uiSectorSizeInCFG = 1024*(0xFFFF & ntohl(Adapter->pstargetparams->HostDrvrConfig4));
- //printk(("uiSectorSize : 0x%X\n", Adapter->uiSectorSizeInCFG));
Adapter->bSectorSizeOverride =(bool) ((ntohl(Adapter->pstargetparams->HostDrvrConfig4))>>16)&0x1;
- //printk(MP_INIT,("bSectorSizeOverride : 0x%X\n",Adapter->bSectorSizeOverride));
if(ntohl(Adapter->pstargetparams->m_u32PowerSavingModeOptions) &0x01)
Adapter->ulPowerSaveMode = DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE;
- //autocorrection part
+
if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
doPowerAutoCorrection(Adapter);
VOID doPowerAutoCorrection(PMINI_ADAPTER psAdapter)
{
- UINT reporting_mode = 0;
+ UINT reporting_mode;
reporting_mode = ntohl(psAdapter->pstargetparams->m_u32PowerSavingModeOptions) &0x02 ;
psAdapter->bIsAutoCorrectEnabled = !((char)(psAdapter->ulPowerSaveMode >> 3) & 0x1);
{
psAdapter->ulPowerSaveMode = DEVICE_POWERSAVE_MODE_AS_PMU_CLOCK_GATING;
psAdapter->bDoSuspend =FALSE;
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"PMC selected..");
}
INT FreeAdapterDsxBuffer(PMINI_ADAPTER Adapter);
-int create_worker_threads(PMINI_ADAPTER psAdapter);
-
int tx_pkt_handler(PMINI_ADAPTER Adapter);
int reset_card_proc(PMINI_ADAPTER Adapter );
projects / mirror_ubuntu-focal-kernel.git / commitdiff