]> git.proxmox.com Git - mirror_ubuntu-zesty-kernel.git/commitdiff
x86: Limit the number of processor bootup messages
authorMike Travis <travis@sgi.com>
Fri, 11 Dec 2009 01:19:36 +0000 (17:19 -0800)
committerH. Peter Anvin <hpa@zytor.com>
Fri, 11 Dec 2009 23:16:00 +0000 (15:16 -0800)
When there are a large number of processors in a system, there
is an excessive amount of messages sent to the system console.
It's estimated that with 4096 processors in a system, and the
console baudrate set to 56K, the startup messages will take
about 84 minutes to clear the serial port.

This set of patches limits the number of repetitious messages
which contain no additional information.  Much of this information
is obtainable from the /proc and /sysfs.   Some of the messages
are also sent to the kernel log buffer as KERN_DEBUG messages so
dmesg can be used to examine more closely any details specific to
a problem.

The new cpu bootup sequence for system_state == SYSTEM_BOOTING:

Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node   1, Processors  #8 #9 #10 #11 #12 #13 #14 #15 Ok.
...
Booting Node   3, Processors  #56 #57 #58 #59 #60 #61 #62 #63 Ok.
Brought up 64 CPUs

After the system is running, a single line boot message is displayed
when CPU's are hotplugged on:

    Booting Node %d Processor %d APIC 0x%x

Status of the following lines:

    CPU: Physical Processor ID: printed once (for boot cpu)
    CPU: Processor Core ID: printed once (for boot cpu)
    CPU: Hyper-Threading is disabled printed once (for boot cpu)
    CPU: Thermal monitoring enabled printed once (for boot cpu)
    CPU %d/0x%x -> Node %d: removed
    CPU %d is now offline: only if system_state == RUNNING
    Initializing CPU#%d: KERN_DEBUG

Signed-off-by: Mike Travis <travis@sgi.com>
LKML-Reference: <4B219E28.8080601@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
arch/x86/kernel/cpu/addon_cpuid_features.c
arch/x86/kernel/cpu/amd.c
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/intel.c
arch/x86/kernel/cpu/mcheck/therm_throt.c
arch/x86/kernel/smpboot.c

index c965e5212714ee66cfe04e847544e213f44a7b2d..468489b57aae6d8d3eefabc0a27358f6e9553112 100644 (file)
@@ -74,6 +74,7 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
        unsigned int eax, ebx, ecx, edx, sub_index;
        unsigned int ht_mask_width, core_plus_mask_width;
        unsigned int core_select_mask, core_level_siblings;
+       static bool printed;
 
        if (c->cpuid_level < 0xb)
                return;
@@ -127,12 +128,14 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c)
 
        c->x86_max_cores = (core_level_siblings / smp_num_siblings);
 
-
-       printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-              c->phys_proc_id);
-       if (c->x86_max_cores > 1)
-               printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-                      c->cpu_core_id);
+       if (!printed) {
+               printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+                      c->phys_proc_id);
+               if (c->x86_max_cores > 1)
+                       printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+                              c->cpu_core_id);
+               printed = 1;
+       }
        return;
 #endif
 }
index 7128b3799cecdd8c2f708124e1939c0686224511..8dc3ea145c975a3eebfbb1510f30c9ffa7b48e06 100644 (file)
@@ -375,8 +375,6 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
                        node = nearby_node(apicid);
        }
        numa_set_node(cpu, node);
-
-       printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
 #endif
 }
 
index c1afa990a6c84bf49229a9c50052b063b9731236..0ee9a3254eecad2cfbc0449cf49f85c36a5e67d1 100644 (file)
@@ -427,6 +427,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 #ifdef CONFIG_X86_HT
        u32 eax, ebx, ecx, edx;
        int index_msb, core_bits;
+       static bool printed;
 
        if (!cpu_has(c, X86_FEATURE_HT))
                return;
@@ -442,7 +443,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
        smp_num_siblings = (ebx & 0xff0000) >> 16;
 
        if (smp_num_siblings == 1) {
-               printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
+               printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n");
                goto out;
        }
 
@@ -469,11 +470,12 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
                                       ((1 << core_bits) - 1);
 
 out:
-       if ((c->x86_max_cores * smp_num_siblings) > 1) {
+       if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) {
                printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
                       c->phys_proc_id);
                printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
                       c->cpu_core_id);
+               printed = 1;
        }
 #endif
 }
@@ -1115,7 +1117,7 @@ void __cpuinit cpu_init(void)
        if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask))
                panic("CPU#%d already initialized!\n", cpu);
 
-       printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+       pr_debug("Initializing CPU#%d\n", cpu);
 
        clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
 
index c900b73f92246d77cac96de3f9bd77685cf5d167..9c31e8b09d2c2676c29f87a68442e56878d6bece 100644 (file)
@@ -270,8 +270,6 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
                node = cpu_to_node(cpu);
        }
        numa_set_node(cpu, node);
-
-       printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
 #endif
 }
 
index 4fef985fc221622623473c25e9abadda053095c9..1003ed4bbce4ebe3351157ebceffae8a5ecb4b40 100644 (file)
@@ -339,8 +339,8 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
        l = apic_read(APIC_LVTTHMR);
        apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
 
-       printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
-              cpu, tm2 ? "TM2" : "TM1");
+       printk_once(KERN_INFO "CPU0: Thermal monitoring enabled (%s)\n",
+                      tm2 ? "TM2" : "TM1");
 
        /* enable thermal throttle processing */
        atomic_set(&therm_throt_en, 1);
index 29e6744f51e3a3eae22409725dd76f1f7f2ceddc..678d0b8c26f3152c67a833f3e782cb15c9d0a61b 100644 (file)
@@ -671,6 +671,26 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
        complete(&c_idle->done);
 }
 
+/* reduce the number of lines printed when booting a large cpu count system */
+static void __cpuinit announce_cpu(int cpu, int apicid)
+{
+       static int current_node = -1;
+       int node = cpu_to_node(cpu);
+
+       if (system_state == SYSTEM_BOOTING) {
+               if (node != current_node) {
+                       if (current_node > (-1))
+                               pr_cont(" Ok.\n");
+                       current_node = node;
+                       pr_info("Booting Node %3d, Processors ", node);
+               }
+               pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " Ok.\n" : "");
+               return;
+       } else
+               pr_info("Booting Node %d Processor %d APIC 0x%x\n",
+                       node, cpu, apicid);
+}
+
 /*
  * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
  * (ie clustered apic addressing mode), this is a LOGICAL apic ID.
@@ -737,9 +757,8 @@ do_rest:
        /* start_ip had better be page-aligned! */
        start_ip = setup_trampoline();
 
-       /* So we see what's up   */
-       printk(KERN_INFO "Booting processor %d APIC 0x%x ip 0x%lx\n",
-                         cpu, apicid, start_ip);
+       /* So we see what's up */
+       announce_cpu(cpu, apicid);
 
        /*
         * This grunge runs the startup process for
@@ -788,21 +807,17 @@ do_rest:
                        udelay(100);
                }
 
-               if (cpumask_test_cpu(cpu, cpu_callin_mask)) {
-                       /* number CPUs logically, starting from 1 (BSP is 0) */
-                       pr_debug("OK.\n");
-                       printk(KERN_INFO "CPU%d: ", cpu);
-                       print_cpu_info(&cpu_data(cpu));
-                       pr_debug("CPU has booted.\n");
-               } else {
+               if (cpumask_test_cpu(cpu, cpu_callin_mask))
+                       pr_debug("CPU%d: has booted.\n", cpu);
+               else {
                        boot_error = 1;
                        if (*((volatile unsigned char *)trampoline_base)
                                        == 0xA5)
                                /* trampoline started but...? */
-                               printk(KERN_ERR "Stuck ??\n");
+                               pr_err("CPU%d: Stuck ??\n", cpu);
                        else
                                /* trampoline code not run */
-                               printk(KERN_ERR "Not responding.\n");
+                               pr_err("CPU%d: Not responding.\n", cpu);
                        if (apic->inquire_remote_apic)
                                apic->inquire_remote_apic(apicid);
                }
@@ -1293,14 +1308,16 @@ void native_cpu_die(unsigned int cpu)
        for (i = 0; i < 10; i++) {
                /* They ack this in play_dead by setting CPU_DEAD */
                if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
-                       printk(KERN_INFO "CPU %d is now offline\n", cpu);
+                       if (system_state == SYSTEM_RUNNING)
+                               pr_info("CPU %u is now offline\n", cpu);
+
                        if (1 == num_online_cpus())
                                alternatives_smp_switch(0);
                        return;
                }
                msleep(100);
        }
-       printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+       pr_err("CPU %u didn't die...\n", cpu);
 }
 
 void play_dead_common(void)