typedef struct _TARGET_PARAMS
{
B_UINT32 m_u32CfgVersion;
- // Scanning Related Params
B_UINT32 m_u32CenterFrequency;
B_UINT32 m_u32BandAScan;
B_UINT32 m_u32BandBScan;
B_UINT32 m_u32BandCScan;
- // QoS Params
B_UINT32 m_u32ErtpsOptions;
B_UINT32 m_u32PHSEnable;
- // HO Params
B_UINT32 m_u32HoEnable;
B_UINT32 m_u32HoReserved1;
B_UINT32 m_u32HoReserved2;
- // Power Control Params
B_UINT32 m_u32MimoEnable;
B_UINT32 m_u32SecurityEnable;
- B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
+ B_UINT32 m_u32PowerSavingModesEnable; /* bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable */
/* PowerSaving Mode Options:
- bit 0 = 1: CPE mode - to keep pcmcia if alive;
- bit 1 = 1: CINR reporting in Idlemode Msg
- bit 2 = 1: Default PSC Enable in sleepmode*/
+ * bit 0 = 1: CPE mode - to keep pcmcia if alive;
+ * bit 1 = 1: CINR reporting in Idlemode Msg
+ * bit 2 = 1: Default PSC Enable in sleepmode
+ */
B_UINT32 m_u32PowerSavingModeOptions;
B_UINT32 m_u32ArqEnable;
- // From Version #3, the HARQ section renamed as general
+ /* From Version #3, the HARQ section renamed as general */
B_UINT32 m_u32HarqEnable;
- // EEPROM Param Location
B_UINT32 m_u32EEPROMFlag;
- // BINARY TYPE - 4th MSByte: Interface Type - 3rd MSByte: Vendor Type - 2nd MSByte
- // Unused - LSByte
+ /* BINARY TYPE - 4th MSByte: Interface Type - 3rd MSByte: Vendor Type - 2nd MSByte
+ * Unused - LSByte
+ */
B_UINT32 m_u32Customize;
B_UINT32 m_u32ConfigBW; /* In Hz */
B_UINT32 m_u32ShutDownInitThresholdTimer;
B_UINT32 m_u32PhyParameter1;
B_UINT32 m_u32PhyParameter2;
B_UINT32 m_u32PhyParameter3;
- B_UINT32 m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17 test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
+ B_UINT32 m_u32TestOptions; /* in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17 test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack */
B_UINT32 m_u32MaxMACDataperDLFrame;
B_UINT32 m_u32MaxMACDataperULFrame;
B_UINT32 m_u32Corr2MacFlags;
- //adding driver params.
B_UINT32 HostDrvrConfig1;
B_UINT32 HostDrvrConfig2;
B_UINT32 HostDrvrConfig3;
B_UINT32 HostDrvrConfig5;
B_UINT32 HostDrvrConfig6;
B_UINT32 m_u32SegmentedPUSCenable;
- // removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
- //BAMC Related Parameters
- //Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 \96 Enable Band AMC signaling.
- //bit 16-31 Band AMC Data configuration: Bit 16 = 1 \96 Band AMC 2x3 support.
+ /* removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
+ * BAMC Related Parameters
+ * Bit 0-15 Band AMC signaling configuration: Bit 1 = 1 \96 Enable Band AMC signaling.
+ * bit 16-31 Band AMC Data configuration: Bit 16 = 1 \96 Band AMC 2x3 support.
+ */
B_UINT32 m_u32BandAMCEnable;
} stTargetParams, TARGET_PARAMS, *PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;