UINT i=0, atemode;
PRXD_STRUC pRxD;
PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE];
-#ifndef UCOS
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
-#endif // UCOS //
#ifdef RT_BIG_ENDIAN
PTXD_STRUC pDestTxD;
TXD_STRUC TxD;
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n"));
-#ifndef UCOS
// check if we have removed the firmware
if (!(ATE_ON(pAd)))
{
NICEraseFirmware(pAd);
}
-#endif // !UCOS //
+
atemode = pAd->ate.Mode;
pAd->ate.Mode = ATE_START;
// pAd->ate.TxDoneCount = pAd->ate.TxCount;
//
// LinkDown(pAd, FALSE);
// AsicEnableBssSync(pAd);
-#ifndef UCOS
+
netif_stop_queue(pAd->net_dev);
-#endif // !UCOS //
+
//
// If we skip "LinkDown()", we should disable protection
// to prevent from sending out RTS or CTS-to-self.
// Abort Tx, RX DMA.
RtmpDmaEnable(pAd, 0);
-#ifndef UCOS
pAd->ate.bFWLoading = TRUE;
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
ATEDBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware failed, Status[=0x%08x]\n", Status));
return FALSE;
}
-#endif // !UCOS //
+
pAd->ate.Mode = ATE_STOP;
#ifdef CONFIG_STA_SUPPORT
RTMPStationStart(pAd);
#endif // CONFIG_STA_SUPPORT //
-#ifndef UCOS
+
netif_start_queue(pAd->net_dev);
-#endif // !UCOS //
}
else if (!strcmp(arg, "TXCARR")) // Tx Carrier
{
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
-#ifndef UCOS
INT Set_ATE_Load_E2P_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
return ret;
}
-#else
-INT Set_ATE_Load_E2P_Proc(
- IN PRTMP_ADAPTER pAd,
- IN PUCHAR arg)
-{
- USHORT WriteEEPROM[(EEPROM_SIZE/2)];
- struct iwreq *wrq = (struct iwreq *)arg;
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("===> %s (wrq->u.data.length = %d)\n\n", __func__, wrq->u.data.length));
-
- if (wrq->u.data.length != EEPROM_SIZE)
- {
- ate_print("%s: error length (=%d) from host\n",
- __func__, wrq->u.data.length);
- return FALSE;
- }
- else/* (wrq->u.data.length == EEPROM_SIZE) */
- {
- /* zero the e2p buffer */
- NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
- /* fill the local buffer */
- NdisMoveMemory((PUCHAR)WriteEEPROM, wrq->u.data.pointer, wrq->u.data.length);
-
- do
- {
- /* write the content of .bin file to EEPROM */
- rt_ee_write_all(pAd, WriteEEPROM);
-
- } while(FALSE);
- }
-
- ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== %s\n", __func__));
-
- return TRUE;
-
-}
-#endif // !UCOS //
INT Set_ATE_Read_E2P_Proc(
IN PRTMP_ADAPTER pAd,
static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
-#ifdef UCOS
-int ate_copy_to_user(
- IN PUCHAR payload,
- IN PUCHAR msg,
- IN INT len)
-{
- memmove(payload, msg, len);
- return 0;
-}
-
-#undef copy_to_user
-#define copy_to_user(x,y,z) ate_copy_to_user((PUCHAR)x, (PUCHAR)y, z)
-#endif // UCOS //
-
#define LEN_OF_ARG 16
VOID RtmpDoAte(
// We will get this command either QA is closed or ated is killed by user.
case RACFG_CMD_ATE_STOP:
{
-#ifndef UCOS
INT32 ret;
-#endif // !UCOS //
ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
// kill ATE daemon when leaving ATE mode.
// We must kill ATE daemon first before setting ATESTOP,
// or Microsoft will report sth. wrong.
-#ifndef UCOS
ret = KILL_THREAD_PID(pAdapter->ate.AtePid, SIGTERM, 1);
if (ret)
{
ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
}
-#endif // !UCOS //
}
// AP might have in ATE_STOP mode due to cmd from QA.
#ifndef __ATE_H__
#define __ATE_H__
-#ifndef UCOS
#define ate_print printk
#define ATEDBGPRINT DBGPRINT
#define EEPROM_SIZE 0x200
#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin"
#endif // CONFIG_STA_SUPPORT //
-#else // !UCOS //
-#define fATE_LOAD_EEPROM 0x0C43
-#ifdef CONFIG_PRINTK
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-extern void puts (const char *s);
-
-/* specificly defined to redirect and show ate-related messages to host. */
-/* Try to define ate_print as a macro. */
-#define ate_print(fmt, args...) \
-do{ int (*org_remote_display)(char *) = NULL; \
- org_remote_display = remote_display;\
- /* Save original "remote_display" */\
- remote_display = (int (*)(char *))ConsoleResponse; \
- printk(fmt, ## args); \
- /* Restore the remote_display function pointer */ \
- remote_display = org_remote_display; }while(0)
-
-#define ATEDBGPRINT(Level, Fmt) \
-{ \
- if ((Level) <= RTDebugLevel) \
- { \
- ate_print Fmt; \
- } \
-}
-#endif // CONFIG_PRINTK //
-#endif // !UCOS //
-
#define ATE_ON(_p) (((_p)->ate.Mode) != ATE_STOP)
/* RT2880_iNIC will define "RT2860". */
/* RT2880_iNIC will define RT2860. */
#define EEPROM_SIZE 0x200
/* iNIC has its own EEPROM_BIN_FILE_NAME */
-#ifndef UCOS
#ifdef CONFIG_STA_SUPPORT
#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin"
#endif // CONFIG_STA_SUPPORT //
-#endif // !UCOS //
-
VOID rt_ee_read_all(