+++ /dev/null
-menuconfig IR_CORE
- tristate "Infrared remote controller adapters"
- depends on INPUT
- default INPUT
- ---help---
- Enable support for Remote Controllers on Linux. This is
- needed in order to support several video capture adapters.
-
- Enable this option if you have a video capture board even
- if you don't need IR, as otherwise, you may not be able to
- compile the driver for your adapter.
-
-config IR_LEGACY
- tristate
- depends on IR_CORE
- default IR_CORE
-
-if IR_CORE
-
-config LIRC
- tristate
- default y
-
- ---help---
- Enable this option to build the Linux Infrared Remote
- Control (LIRC) core device interface driver. The LIRC
- interface passes raw IR to and from userspace, where the
- LIRC daemon handles protocol decoding for IR reception and
- encoding for IR transmitting (aka "blasting").
-
-source "drivers/media/IR/keymaps/Kconfig"
-
-config IR_NEC_DECODER
- tristate "Enable IR raw decoder for the NEC protocol"
- depends on IR_CORE
- select BITREVERSE
- default y
-
- ---help---
- Enable this option if you have IR with NEC protocol, and
- if the IR is decoded in software
-
-config IR_RC5_DECODER
- tristate "Enable IR raw decoder for the RC-5 protocol"
- depends on IR_CORE
- select BITREVERSE
- default y
-
- ---help---
- Enable this option if you have IR with RC-5 protocol, and
- if the IR is decoded in software
-
-config IR_RC6_DECODER
- tristate "Enable IR raw decoder for the RC6 protocol"
- depends on IR_CORE
- select BITREVERSE
- default y
-
- ---help---
- Enable this option if you have an infrared remote control which
- uses the RC6 protocol, and you need software decoding support.
-
-config IR_JVC_DECODER
- tristate "Enable IR raw decoder for the JVC protocol"
- depends on IR_CORE
- select BITREVERSE
- default y
-
- ---help---
- Enable this option if you have an infrared remote control which
- uses the JVC protocol, and you need software decoding support.
-
-config IR_SONY_DECODER
- tristate "Enable IR raw decoder for the Sony protocol"
- depends on IR_CORE
- default y
-
- ---help---
- Enable this option if you have an infrared remote control which
- uses the Sony protocol, and you need software decoding support.
-
-config IR_RC5_SZ_DECODER
- tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
- depends on IR_CORE
- select BITREVERSE
- default y
-
- ---help---
- Enable this option if you have IR with RC-5 (streamzap) protocol,
- and if the IR is decoded in software. (The Streamzap PC Remote
- uses an IR protocol that is almost standard RC-5, but not quite,
- as it uses an additional bit).
-
-config IR_LIRC_CODEC
- tristate "Enable IR to LIRC bridge"
- depends on IR_CORE
- depends on LIRC
- default y
-
- ---help---
- Enable this option to pass raw IR to and from userspace via
- the LIRC interface.
-
-config IR_ENE
- tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
- depends on PNP
- depends on IR_CORE
- ---help---
- Say Y here to enable support for integrated infrared receiver
- /transceiver made by ENE.
-
- You can see if you have it by looking at lspnp output.
- Output should include ENE0100 ENE0200 or something similar.
-
- To compile this driver as a module, choose M here: the
- module will be called ene_ir.
-
-config IR_IMON
- tristate "SoundGraph iMON Receiver and Display"
- depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
- select USB
- ---help---
- Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
- IR Receiver and/or LCD/VFD/VGA display.
-
- To compile this driver as a module, choose M here: the
- module will be called imon.
-
-config IR_MCEUSB
- tristate "Windows Media Center Ed. eHome Infrared Transceiver"
- depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
- select USB
- ---help---
- Say Y here if you want to use a Windows Media Center Edition
- eHome Infrared Transceiver.
-
- To compile this driver as a module, choose M here: the
- module will be called mceusb.
-
-config IR_NUVOTON
- tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
- depends on PNP
- depends on IR_CORE
- ---help---
- Say Y here to enable support for integrated infrared receiver
- /transciever made by Nuvoton (formerly Winbond). This chip is
- found in the ASRock ION 330HT, as well as assorted Intel
- DP55-series motherboards (and of course, possibly others).
-
- To compile this driver as a module, choose M here: the
- module will be called nuvoton-cir.
-
-config IR_STREAMZAP
- tristate "Streamzap PC Remote IR Receiver"
- depends on USB_ARCH_HAS_HCD
- depends on IR_CORE
- select USB
- ---help---
- Say Y here if you want to use a Streamzap PC Remote
- Infrared Receiver.
-
- To compile this driver as a module, choose M here: the
- module will be called streamzap.
-
-endif #IR_CORE
+++ /dev/null
-ir-common-objs := ir-functions.o
-ir-core-objs := ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
-
-obj-y += keymaps/
-
-obj-$(CONFIG_IR_CORE) += ir-core.o
-obj-$(CONFIG_IR_LEGACY) += ir-common.o
-obj-$(CONFIG_LIRC) += lirc_dev.o
-obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
-obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
-obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
-obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
-obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
-obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o
-obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
-
-# stand-alone IR receivers/transmitters
-obj-$(CONFIG_IR_IMON) += imon.o
-obj-$(CONFIG_IR_MCEUSB) += mceusb.o
-obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
-obj-$(CONFIG_IR_ENE) += ene_ir.o
-obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
+++ /dev/null
-/*
- * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX)
- *
- * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- *
- * Special thanks to:
- * Sami R. <maesesami@gmail.com> for lot of help in debugging and therefore
- * bringing to life support for transmission & learning mode.
- *
- * Charlie Andrews <charliethepilot@googlemail.com> for lots of help in
- * bringing up the support of new firmware buffer that is popular
- * on latest notebooks
- *
- * ENE for partial device documentation
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
-#include <media/ir-common.h>
-#include "ene_ir.h"
-
-static int sample_period;
-static bool learning_mode_force;
-static int debug;
-static bool txsim;
-
-static void ene_set_reg_addr(struct ene_device *dev, u16 reg)
-{
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-}
-
-/* read a hardware register */
-static u8 ene_read_reg(struct ene_device *dev, u16 reg)
-{
- u8 retval;
- ene_set_reg_addr(dev, reg);
- retval = inb(dev->hw_io + ENE_IO);
- dbg_regs("reg %04x == %02x", reg, retval);
- return retval;
-}
-
-/* write a hardware register */
-static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value)
-{
- dbg_regs("reg %04x <- %02x", reg, value);
- ene_set_reg_addr(dev, reg);
- outb(value, dev->hw_io + ENE_IO);
-}
-
-/* Set bits in hardware register */
-static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
-{
- dbg_regs("reg %04x |= %02x", reg, mask);
- ene_set_reg_addr(dev, reg);
- outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO);
-}
-
-/* Clear bits in hardware register */
-static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
-{
- dbg_regs("reg %04x &= ~%02x ", reg, mask);
- ene_set_reg_addr(dev, reg);
- outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO);
-}
-
-/* A helper to set/clear a bit in register according to boolean variable */
-static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask,
- bool set)
-{
- if (set)
- ene_set_reg_mask(dev, reg, mask);
- else
- ene_clear_reg_mask(dev, reg, mask);
-}
-
-/* detect hardware features */
-static int ene_hw_detect(struct ene_device *dev)
-{
- u8 chip_major, chip_minor;
- u8 hw_revision, old_ver;
- u8 fw_reg2, fw_reg1;
-
- ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
- chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR);
- chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR);
- ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
-
- hw_revision = ene_read_reg(dev, ENE_ECHV);
- old_ver = ene_read_reg(dev, ENE_HW_VER_OLD);
-
- dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) +
- (ene_read_reg(dev, ENE_PLLFRL) >> 4);
-
- if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD)
- dev->rx_period_adjust =
- dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4;
-
- if (hw_revision == 0xFF) {
- ene_warn("device seems to be disabled");
- ene_warn("send a mail to lirc-list@lists.sourceforge.net");
- ene_warn("please attach output of acpidump and dmidecode");
- return -ENODEV;
- }
-
- ene_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x",
- chip_major, chip_minor, old_ver, hw_revision);
-
- ene_notice("PLL freq = %d", dev->pll_freq);
-
- if (chip_major == 0x33) {
- ene_warn("chips 0x33xx aren't supported");
- return -ENODEV;
- }
-
- if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
- dev->hw_revision = ENE_HW_C;
- ene_notice("KB3926C detected");
- } else if (old_ver == 0x24 && hw_revision == 0xC0) {
- dev->hw_revision = ENE_HW_B;
- ene_notice("KB3926B detected");
- } else {
- dev->hw_revision = ENE_HW_D;
- ene_notice("KB3926D or higher detected");
- }
-
- /* detect features hardware supports */
- if (dev->hw_revision < ENE_HW_C)
- return 0;
-
- fw_reg1 = ene_read_reg(dev, ENE_FW1);
- fw_reg2 = ene_read_reg(dev, ENE_FW2);
-
- ene_notice("Firmware regs: %02x %02x", fw_reg1, fw_reg2);
-
- dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A);
- dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING);
- dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF);
-
- if (dev->hw_learning_and_tx_capable)
- dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT);
-
- ene_notice("Hardware features:");
-
- if (dev->hw_learning_and_tx_capable) {
- ene_notice("* Supports transmitting & learning mode");
- ene_notice(" This feature is rare and therefore,");
- ene_notice(" you are welcome to test it,");
- ene_notice(" and/or contact the author via:");
- ene_notice(" lirc-list@lists.sourceforge.net");
- ene_notice(" or maximlevitsky@gmail.com");
-
- ene_notice("* Uses GPIO %s for IR raw input",
- dev->hw_use_gpio_0a ? "40" : "0A");
-
- if (dev->hw_fan_input)
- ene_notice("* Uses unused fan feedback input as source"
- " of demodulated IR data");
- }
-
- if (!dev->hw_fan_input)
- ene_notice("* Uses GPIO %s for IR demodulated input",
- dev->hw_use_gpio_0a ? "0A" : "40");
-
- if (dev->hw_extra_buffer)
- ene_notice("* Uses new style input buffer");
- return 0;
-}
-
-/* Read properities of hw sample buffer */
-static void ene_rx_setup_hw_buffer(struct ene_device *dev)
-{
- u16 tmp;
-
- ene_rx_read_hw_pointer(dev);
- dev->r_pointer = dev->w_pointer;
-
- if (!dev->hw_extra_buffer) {
- dev->buffer_len = ENE_FW_PACKET_SIZE * 2;
- return;
- }
-
- tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER);
- tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8;
- dev->extra_buf1_address = tmp;
-
- dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2);
-
- tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3);
- tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8;
- dev->extra_buf2_address = tmp;
-
- dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5);
-
- dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8;
-
- ene_notice("Hardware uses 2 extended buffers:");
- ene_notice(" 0x%04x - len : %d", dev->extra_buf1_address,
- dev->extra_buf1_len);
- ene_notice(" 0x%04x - len : %d", dev->extra_buf2_address,
- dev->extra_buf2_len);
-
- ene_notice("Total buffer len = %d", dev->buffer_len);
-
- if (dev->buffer_len > 64 || dev->buffer_len < 16)
- goto error;
-
- if (dev->extra_buf1_address > 0xFBFC ||
- dev->extra_buf1_address < 0xEC00)
- goto error;
-
- if (dev->extra_buf2_address > 0xFBFC ||
- dev->extra_buf2_address < 0xEC00)
- goto error;
-
- if (dev->r_pointer > dev->buffer_len)
- goto error;
-
- ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
- return;
-error:
- ene_warn("Error validating extra buffers, device probably won't work");
- dev->hw_extra_buffer = false;
- ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
-}
-
-
-/* Restore the pointers to extra buffers - to make module reload work*/
-static void ene_rx_restore_hw_buffer(struct ene_device *dev)
-{
- if (!dev->hw_extra_buffer)
- return;
-
- ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0,
- dev->extra_buf1_address & 0xFF);
- ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1,
- dev->extra_buf1_address >> 8);
- ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len);
-
- ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3,
- dev->extra_buf2_address & 0xFF);
- ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4,
- dev->extra_buf2_address >> 8);
- ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5,
- dev->extra_buf2_len);
- ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
-}
-
-/* Read hardware write pointer */
-static void ene_rx_read_hw_pointer(struct ene_device *dev)
-{
- if (dev->hw_extra_buffer)
- dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER);
- else
- dev->w_pointer = ene_read_reg(dev, ENE_FW2)
- & ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE;
-
- dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x",
- dev->w_pointer, dev->r_pointer);
-}
-
-/* Gets address of next sample from HW ring buffer */
-static int ene_rx_get_sample_reg(struct ene_device *dev)
-{
- int r_pointer;
-
- if (dev->r_pointer == dev->w_pointer) {
- dbg_verbose("RB: hit end, try update w_pointer");
- ene_rx_read_hw_pointer(dev);
- }
-
- if (dev->r_pointer == dev->w_pointer) {
- dbg_verbose("RB: end of data at %d", dev->r_pointer);
- return 0;
- }
-
- dbg_verbose("RB: reading at offset %d", dev->r_pointer);
- r_pointer = dev->r_pointer;
-
- dev->r_pointer++;
- if (dev->r_pointer == dev->buffer_len)
- dev->r_pointer = 0;
-
- dbg_verbose("RB: next read will be from offset %d", dev->r_pointer);
-
- if (r_pointer < 8) {
- dbg_verbose("RB: read at main buffer at %d", r_pointer);
- return ENE_FW_SAMPLE_BUFFER + r_pointer;
- }
-
- r_pointer -= 8;
-
- if (r_pointer < dev->extra_buf1_len) {
- dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer);
- return dev->extra_buf1_address + r_pointer;
- }
-
- r_pointer -= dev->extra_buf1_len;
-
- if (r_pointer < dev->extra_buf2_len) {
- dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer);
- return dev->extra_buf2_address + r_pointer;
- }
-
- dbg("attempt to read beyong ring bufer end");
- return 0;
-}
-
-/* Sense current received carrier */
-void ene_rx_sense_carrier(struct ene_device *dev)
-{
- DEFINE_IR_RAW_EVENT(ev);
-
- int carrier, duty_cycle;
- int period = ene_read_reg(dev, ENE_CIRCAR_PRD);
- int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD);
-
- if (!(period & ENE_CIRCAR_PRD_VALID))
- return;
-
- period &= ~ENE_CIRCAR_PRD_VALID;
-
- if (!period)
- return;
-
- dbg("RX: hardware carrier period = %02x", period);
- dbg("RX: hardware carrier pulse period = %02x", hperiod);
-
- carrier = 2000000 / period;
- duty_cycle = (hperiod * 100) / period;
- dbg("RX: sensed carrier = %d Hz, duty cycle %d%%",
- carrier, duty_cycle);
- if (dev->carrier_detect_enabled) {
- ev.carrier_report = true;
- ev.carrier = carrier;
- ev.duty_cycle = duty_cycle;
- ir_raw_event_store(dev->idev, &ev);
- }
-}
-
-/* this enables/disables the CIR RX engine */
-static void ene_rx_enable_cir_engine(struct ene_device *dev, bool enable)
-{
- ene_set_clear_reg_mask(dev, ENE_CIRCFG,
- ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable);
-}
-
-/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/
-static void ene_rx_select_input(struct ene_device *dev, bool gpio_0a)
-{
- ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a);
-}
-
-/*
- * this enables alternative input via fan tachometer sensor and bypasses
- * the hw CIR engine
- */
-static void ene_rx_enable_fan_input(struct ene_device *dev, bool enable)
-{
- if (!dev->hw_fan_input)
- return;
-
- if (!enable)
- ene_write_reg(dev, ENE_FAN_AS_IN1, 0);
- else {
- ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
- ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
- }
-}
-
-/* setup the receiver for RX*/
-static void ene_rx_setup(struct ene_device *dev)
-{
- bool learning_mode = dev->learning_mode_enabled ||
- dev->carrier_detect_enabled;
- int sample_period_adjust = 0;
-
- dbg("RX: setup receiver, learning mode = %d", learning_mode);
-
-
- /* This selects RLC input and clears CFG2 settings */
- ene_write_reg(dev, ENE_CIRCFG2, 0x00);
-
- /* set sample period*/
- if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD)
- sample_period_adjust =
- dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2;
-
- ene_write_reg(dev, ENE_CIRRLC_CFG,
- (sample_period + sample_period_adjust) |
- ENE_CIRRLC_CFG_OVERFLOW);
- /* revB doesn't support inputs */
- if (dev->hw_revision < ENE_HW_C)
- goto select_timeout;
-
- if (learning_mode) {
-
- WARN_ON(!dev->hw_learning_and_tx_capable);
-
- /* Enable the opposite of the normal input
- That means that if GPIO40 is normally used, use GPIO0A
- and vice versa.
- This input will carry non demodulated
- signal, and we will tell the hw to demodulate it itself */
- ene_rx_select_input(dev, !dev->hw_use_gpio_0a);
- dev->rx_fan_input_inuse = false;
-
- /* Enable carrier demodulation */
- ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
-
- /* Enable carrier detection */
- ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63);
- ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT,
- dev->carrier_detect_enabled || debug);
- } else {
- if (dev->hw_fan_input)
- dev->rx_fan_input_inuse = true;
- else
- ene_rx_select_input(dev, dev->hw_use_gpio_0a);
-
- /* Disable carrier detection & demodulation */
- ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
- ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT);
- }
-
-select_timeout:
- if (dev->rx_fan_input_inuse) {
- dev->props->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
-
- /* Fan input doesn't support timeouts, it just ends the
- input with a maximum sample */
- dev->props->min_timeout = dev->props->max_timeout =
- MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
- ENE_FW_SAMPLE_PERIOD_FAN);
- } else {
- dev->props->rx_resolution = MS_TO_NS(sample_period);
-
- /* Theoreticly timeout is unlimited, but we cap it
- * because it was seen that on one device, it
- * would stop sending spaces after around 250 msec.
- * Besides, this is close to 2^32 anyway and timeout is u32.
- */
- dev->props->min_timeout = MS_TO_NS(127 * sample_period);
- dev->props->max_timeout = MS_TO_NS(200000);
- }
-
- if (dev->hw_learning_and_tx_capable)
- dev->props->tx_resolution = MS_TO_NS(sample_period);
-
- if (dev->props->timeout > dev->props->max_timeout)
- dev->props->timeout = dev->props->max_timeout;
- if (dev->props->timeout < dev->props->min_timeout)
- dev->props->timeout = dev->props->min_timeout;
-}
-
-/* Enable the device for receive */
-static void ene_rx_enable(struct ene_device *dev)
-{
- u8 reg_value;
-
- /* Enable system interrupt */
- if (dev->hw_revision < ENE_HW_C) {
- ene_write_reg(dev, ENEB_IRQ, dev->irq << 1);
- ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
- } else {
- reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0;
- reg_value |= ENE_IRQ_UNK_EN;
- reg_value &= ~ENE_IRQ_STATUS;
- reg_value |= (dev->irq & ENE_IRQ_MASK);
- ene_write_reg(dev, ENE_IRQ, reg_value);
- }
-
- /* Enable inputs */
- ene_rx_enable_fan_input(dev, dev->rx_fan_input_inuse);
- ene_rx_enable_cir_engine(dev, !dev->rx_fan_input_inuse);
-
- /* ack any pending irqs - just in case */
- ene_irq_status(dev);
-
- /* enable firmware bits */
- ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
- /* enter idle mode */
- ir_raw_event_set_idle(dev->idev, true);
- dev->rx_enabled = true;
-}
-
-/* Disable the device receiver */
-static void ene_rx_disable(struct ene_device *dev)
-{
- /* disable inputs */
- ene_rx_enable_cir_engine(dev, false);
- ene_rx_enable_fan_input(dev, false);
-
- /* disable hardware IRQ and firmware flag */
- ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
- ir_raw_event_set_idle(dev->idev, true);
- dev->rx_enabled = false;
-}
-
-/* This resets the receiver. Usefull to stop stream of spaces at end of
- * transmission
- */
-static void ene_rx_reset(struct ene_device *dev)
-{
- ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
- ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
-}
-
-/* Set up the TX carrier frequency and duty cycle */
-static void ene_tx_set_carrier(struct ene_device *dev)
-{
- u8 tx_puls_width;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->hw_lock, flags);
-
- ene_set_clear_reg_mask(dev, ENE_CIRCFG,
- ENE_CIRCFG_TX_CARR, dev->tx_period > 0);
-
- if (!dev->tx_period)
- goto unlock;
-
- BUG_ON(dev->tx_duty_cycle >= 100 || dev->tx_duty_cycle <= 0);
-
- tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle);
-
- if (!tx_puls_width)
- tx_puls_width = 1;
-
- dbg("TX: pulse distance = %d * 500 ns", dev->tx_period);
- dbg("TX: pulse width = %d * 500 ns", tx_puls_width);
-
- ene_write_reg(dev, ENE_CIRMOD_PRD, dev->tx_period | ENE_CIRMOD_PRD_POL);
- ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width);
-unlock:
- spin_unlock_irqrestore(&dev->hw_lock, flags);
-}
-
-/* Enable/disable transmitters */
-static void ene_tx_set_transmitters(struct ene_device *dev)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dev->hw_lock, flags);
- ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41,
- !!(dev->transmitter_mask & 0x01));
- ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D,
- !!(dev->transmitter_mask & 0x02));
- spin_unlock_irqrestore(&dev->hw_lock, flags);
-}
-
-/* prepare transmission */
-static void ene_tx_enable(struct ene_device *dev)
-{
- u8 conf1 = ene_read_reg(dev, ENE_CIRCFG);
- u8 fwreg2 = ene_read_reg(dev, ENE_FW2);
-
- dev->saved_conf1 = conf1;
-
- /* Show information about currently connected transmitter jacks */
- if (fwreg2 & ENE_FW2_EMMITER1_CONN)
- dbg("TX: Transmitter #1 is connected");
-
- if (fwreg2 & ENE_FW2_EMMITER2_CONN)
- dbg("TX: Transmitter #2 is connected");
-
- if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN)))
- ene_warn("TX: transmitter cable isn't connected!");
-
- /* disable receive on revc */
- if (dev->hw_revision == ENE_HW_C)
- conf1 &= ~ENE_CIRCFG_RX_EN;
-
- /* Enable TX engine */
- conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ;
- ene_write_reg(dev, ENE_CIRCFG, conf1);
-}
-
-/* end transmission */
-static void ene_tx_disable(struct ene_device *dev)
-{
- ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1);
- dev->tx_buffer = NULL;
-}
-
-
-/* TX one sample - must be called with dev->hw_lock*/
-static void ene_tx_sample(struct ene_device *dev)
-{
- u8 raw_tx;
- u32 sample;
- bool pulse = dev->tx_sample_pulse;
-
- if (!dev->tx_buffer) {
- ene_warn("TX: BUG: attempt to transmit NULL buffer");
- return;
- }
-
- /* Grab next TX sample */
- if (!dev->tx_sample) {
-
- if (dev->tx_pos == dev->tx_len) {
- if (!dev->tx_done) {
- dbg("TX: no more data to send");
- dev->tx_done = true;
- goto exit;
- } else {
- dbg("TX: last sample sent by hardware");
- ene_tx_disable(dev);
- complete(&dev->tx_complete);
- return;
- }
- }
-
- sample = dev->tx_buffer[dev->tx_pos++];
- dev->tx_sample_pulse = !dev->tx_sample_pulse;
-
- dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period);
-
- if (!dev->tx_sample)
- dev->tx_sample = 1;
- }
-
- raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK);
- dev->tx_sample -= raw_tx;
-
- dbg("TX: sample %8d (%s)", raw_tx * sample_period,
- pulse ? "pulse" : "space");
- if (pulse)
- raw_tx |= ENE_CIRRLC_OUT_PULSE;
-
- ene_write_reg(dev,
- dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx);
-
- dev->tx_reg = !dev->tx_reg;
-exit:
- /* simulate TX done interrupt */
- if (txsim)
- mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
-}
-
-/* timer to simulate tx done interrupt */
-static void ene_tx_irqsim(unsigned long data)
-{
- struct ene_device *dev = (struct ene_device *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->hw_lock, flags);
- ene_tx_sample(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
-}
-
-
-/* read irq status and ack it */
-static int ene_irq_status(struct ene_device *dev)
-{
- u8 irq_status;
- u8 fw_flags1, fw_flags2;
- int retval = 0;
-
- fw_flags2 = ene_read_reg(dev, ENE_FW2);
-
- if (dev->hw_revision < ENE_HW_C) {
- irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS);
-
- if (!(irq_status & ENEB_IRQ_STATUS_IR))
- return 0;
-
- ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR);
- return ENE_IRQ_RX;
- }
-
- irq_status = ene_read_reg(dev, ENE_IRQ);
- if (!(irq_status & ENE_IRQ_STATUS))
- return 0;
-
- /* original driver does that twice - a workaround ? */
- ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
- ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
-
- /* check RX interrupt */
- if (fw_flags2 & ENE_FW2_RXIRQ) {
- retval |= ENE_IRQ_RX;
- ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ);
- }
-
- /* check TX interrupt */
- fw_flags1 = ene_read_reg(dev, ENE_FW1);
- if (fw_flags1 & ENE_FW1_TXIRQ) {
- ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
- retval |= ENE_IRQ_TX;
- }
-
- return retval;
-}
-
-/* interrupt handler */
-static irqreturn_t ene_isr(int irq, void *data)
-{
- u16 hw_value, reg;
- int hw_sample, irq_status;
- bool pulse;
- unsigned long flags;
- irqreturn_t retval = IRQ_NONE;
- struct ene_device *dev = (struct ene_device *)data;
- DEFINE_IR_RAW_EVENT(ev);
-
- spin_lock_irqsave(&dev->hw_lock, flags);
-
- dbg_verbose("ISR called");
- ene_rx_read_hw_pointer(dev);
- irq_status = ene_irq_status(dev);
-
- if (!irq_status)
- goto unlock;
-
- retval = IRQ_HANDLED;
-
- if (irq_status & ENE_IRQ_TX) {
- dbg_verbose("TX interrupt");
- if (!dev->hw_learning_and_tx_capable) {
- dbg("TX interrupt on unsupported device!");
- goto unlock;
- }
- ene_tx_sample(dev);
- }
-
- if (!(irq_status & ENE_IRQ_RX))
- goto unlock;
-
- dbg_verbose("RX interrupt");
-
- if (dev->hw_learning_and_tx_capable)
- ene_rx_sense_carrier(dev);
-
- /* On hardware that don't support extra buffer we need to trust
- the interrupt and not track the read pointer */
- if (!dev->hw_extra_buffer)
- dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0;
-
- while (1) {
-
- reg = ene_rx_get_sample_reg(dev);
-
- dbg_verbose("next sample to read at: %04x", reg);
- if (!reg)
- break;
-
- hw_value = ene_read_reg(dev, reg);
-
- if (dev->rx_fan_input_inuse) {
-
- int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER;
-
- /* read high part of the sample */
- hw_value |= ene_read_reg(dev, reg + offset) << 8;
- pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS;
-
- /* clear space bit, and other unused bits */
- hw_value &= ENE_FW_SMPL_BUF_FAN_MSK;
- hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN;
-
- } else {
- pulse = !(hw_value & ENE_FW_SAMPLE_SPACE);
- hw_value &= ~ENE_FW_SAMPLE_SPACE;
- hw_sample = hw_value * sample_period;
-
- if (dev->rx_period_adjust) {
- hw_sample *= 100;
- hw_sample /= (100 + dev->rx_period_adjust);
- }
- }
-
- if (!dev->hw_extra_buffer && !hw_sample) {
- dev->r_pointer = dev->w_pointer;
- continue;
- }
-
- dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
-
- ev.duration = MS_TO_NS(hw_sample);
- ev.pulse = pulse;
- ir_raw_event_store_with_filter(dev->idev, &ev);
- }
-
- ir_raw_event_handle(dev->idev);
-unlock:
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- return retval;
-}
-
-/* Initialize default settings */
-static void ene_setup_default_settings(struct ene_device *dev)
-{
- dev->tx_period = 32;
- dev->tx_duty_cycle = 50; /*%*/
- dev->transmitter_mask = 0x03;
- dev->learning_mode_enabled = learning_mode_force;
-
- /* Set reasonable default timeout */
- dev->props->timeout = MS_TO_NS(150000);
-}
-
-/* Upload all hardware settings at once. Used at load and resume time */
-static void ene_setup_hw_settings(struct ene_device *dev)
-{
- if (dev->hw_learning_and_tx_capable) {
- ene_tx_set_carrier(dev);
- ene_tx_set_transmitters(dev);
- }
-
- ene_rx_setup(dev);
-}
-
-/* outside interface: called on first open*/
-static int ene_open(void *data)
-{
- struct ene_device *dev = (struct ene_device *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&dev->hw_lock, flags);
- ene_rx_enable(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- return 0;
-}
-
-/* outside interface: called on device close*/
-static void ene_close(void *data)
-{
- struct ene_device *dev = (struct ene_device *)data;
- unsigned long flags;
- spin_lock_irqsave(&dev->hw_lock, flags);
-
- ene_rx_disable(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
-}
-
-/* outside interface: set transmitter mask */
-static int ene_set_tx_mask(void *data, u32 tx_mask)
-{
- struct ene_device *dev = (struct ene_device *)data;
- dbg("TX: attempt to set transmitter mask %02x", tx_mask);
-
- /* invalid txmask */
- if (!tx_mask || tx_mask & ~0x03) {
- dbg("TX: invalid mask");
- /* return count of transmitters */
- return 2;
- }
-
- dev->transmitter_mask = tx_mask;
- ene_tx_set_transmitters(dev);
- return 0;
-}
-
-/* outside interface : set tx carrier */
-static int ene_set_tx_carrier(void *data, u32 carrier)
-{
- struct ene_device *dev = (struct ene_device *)data;
- u32 period = 2000000 / carrier;
-
- dbg("TX: attempt to set tx carrier to %d kHz", carrier);
-
- if (period && (period > ENE_CIRMOD_PRD_MAX ||
- period < ENE_CIRMOD_PRD_MIN)) {
-
- dbg("TX: out of range %d-%d kHz carrier",
- 2000 / ENE_CIRMOD_PRD_MIN, 2000 / ENE_CIRMOD_PRD_MAX);
- return -1;
- }
-
- dev->tx_period = period;
- ene_tx_set_carrier(dev);
- return 0;
-}
-
-/*outside interface : set tx duty cycle */
-static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
-{
- struct ene_device *dev = (struct ene_device *)data;
- dbg("TX: setting duty cycle to %d%%", duty_cycle);
- dev->tx_duty_cycle = duty_cycle;
- ene_tx_set_carrier(dev);
- return 0;
-}
-
-/* outside interface: enable learning mode */
-static int ene_set_learning_mode(void *data, int enable)
-{
- struct ene_device *dev = (struct ene_device *)data;
- unsigned long flags;
- if (enable == dev->learning_mode_enabled)
- return 0;
-
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->learning_mode_enabled = enable;
- ene_rx_disable(dev);
- ene_rx_setup(dev);
- ene_rx_enable(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- return 0;
-}
-
-static int ene_set_carrier_report(void *data, int enable)
-{
- struct ene_device *dev = (struct ene_device *)data;
- unsigned long flags;
-
- if (enable == dev->carrier_detect_enabled)
- return 0;
-
- spin_lock_irqsave(&dev->hw_lock, flags);
- dev->carrier_detect_enabled = enable;
- ene_rx_disable(dev);
- ene_rx_setup(dev);
- ene_rx_enable(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- return 0;
-}
-
-/* outside interface: enable or disable idle mode */
-static void ene_set_idle(void *data, bool idle)
-{
- if (idle) {
- ene_rx_reset((struct ene_device *)data);
- dbg("RX: end of data");
- }
-}
-
-/* outside interface: transmit */
-static int ene_transmit(void *data, int *buf, u32 n)
-{
- struct ene_device *dev = (struct ene_device *)data;
- unsigned long flags;
-
- dev->tx_buffer = buf;
- dev->tx_len = n / sizeof(int);
- dev->tx_pos = 0;
- dev->tx_reg = 0;
- dev->tx_done = 0;
- dev->tx_sample = 0;
- dev->tx_sample_pulse = 0;
-
- dbg("TX: %d samples", dev->tx_len);
-
- spin_lock_irqsave(&dev->hw_lock, flags);
-
- ene_tx_enable(dev);
-
- /* Transmit first two samples */
- ene_tx_sample(dev);
- ene_tx_sample(dev);
-
- spin_unlock_irqrestore(&dev->hw_lock, flags);
-
- if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
- dbg("TX: timeout");
- spin_lock_irqsave(&dev->hw_lock, flags);
- ene_tx_disable(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
- } else
- dbg("TX: done");
- return n;
-}
-
-/* probe entry */
-static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
-{
- int error = -ENOMEM;
- struct ir_dev_props *ir_props;
- struct input_dev *input_dev;
- struct ene_device *dev;
-
- /* allocate memory */
- input_dev = input_allocate_device();
- ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
- dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
- if (!input_dev || !ir_props || !dev)
- goto error1;
-
- /* validate resources */
- error = -ENODEV;
-
- if (!pnp_port_valid(pnp_dev, 0) ||
- pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE)
- goto error;
-
- if (!pnp_irq_valid(pnp_dev, 0))
- goto error;
-
- spin_lock_init(&dev->hw_lock);
-
- /* claim the resources */
- error = -EBUSY;
- dev->hw_io = pnp_port_start(pnp_dev, 0);
- if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) {
- dev->hw_io = -1;
- dev->irq = -1;
- goto error;
- }
-
- dev->irq = pnp_irq(pnp_dev, 0);
- if (request_irq(dev->irq, ene_isr,
- IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) {
- dev->irq = -1;
- goto error;
- }
-
- pnp_set_drvdata(pnp_dev, dev);
- dev->pnp_dev = pnp_dev;
-
- /* don't allow too short/long sample periods */
- if (sample_period < 5 || sample_period > 0x7F)
- sample_period = ENE_DEFAULT_SAMPLE_PERIOD;
-
- /* detect hardware version and features */
- error = ene_hw_detect(dev);
- if (error)
- goto error;
-
- if (!dev->hw_learning_and_tx_capable && txsim) {
- dev->hw_learning_and_tx_capable = true;
- setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
- (long unsigned int)dev);
- ene_warn("Simulation of TX activated");
- }
-
- if (!dev->hw_learning_and_tx_capable)
- learning_mode_force = false;
-
- ir_props->driver_type = RC_DRIVER_IR_RAW;
- ir_props->allowed_protos = IR_TYPE_ALL;
- ir_props->priv = dev;
- ir_props->open = ene_open;
- ir_props->close = ene_close;
- ir_props->s_idle = ene_set_idle;
-
- dev->props = ir_props;
- dev->idev = input_dev;
-
- if (dev->hw_learning_and_tx_capable) {
- ir_props->s_learning_mode = ene_set_learning_mode;
- init_completion(&dev->tx_complete);
- ir_props->tx_ir = ene_transmit;
- ir_props->s_tx_mask = ene_set_tx_mask;
- ir_props->s_tx_carrier = ene_set_tx_carrier;
- ir_props->s_tx_duty_cycle = ene_set_tx_duty_cycle;
- ir_props->s_carrier_report = ene_set_carrier_report;
- }
-
- ene_rx_setup_hw_buffer(dev);
- ene_setup_default_settings(dev);
- ene_setup_hw_settings(dev);
-
- device_set_wakeup_capable(&pnp_dev->dev, true);
- device_set_wakeup_enable(&pnp_dev->dev, true);
-
- if (dev->hw_learning_and_tx_capable)
- input_dev->name = "ENE eHome Infrared Remote Transceiver";
- else
- input_dev->name = "ENE eHome Infrared Remote Receiver";
-
- error = -ENODEV;
- if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
- ENE_DRIVER_NAME))
- goto error;
-
- ene_notice("driver has been succesfully loaded");
- return 0;
-error:
- if (dev && dev->irq >= 0)
- free_irq(dev->irq, dev);
- if (dev && dev->hw_io >= 0)
- release_region(dev->hw_io, ENE_IO_SIZE);
-error1:
- input_free_device(input_dev);
- kfree(ir_props);
- kfree(dev);
- return error;
-}
-
-/* main unload function */
-static void ene_remove(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- unsigned long flags;
-
- spin_lock_irqsave(&dev->hw_lock, flags);
- ene_rx_disable(dev);
- ene_rx_restore_hw_buffer(dev);
- spin_unlock_irqrestore(&dev->hw_lock, flags);
-
- free_irq(dev->irq, dev);
- release_region(dev->hw_io, ENE_IO_SIZE);
- ir_input_unregister(dev->idev);
- kfree(dev->props);
- kfree(dev);
-}
-
-/* enable wake on IR (wakes on specific button on original remote) */
-static void ene_enable_wake(struct ene_device *dev, int enable)
-{
- enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
- dbg("wake on IR %s", enable ? "enabled" : "disabled");
- ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable);
-}
-
-#ifdef CONFIG_PM
-static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_enable_wake(dev, true);
-
- /* TODO: add support for wake pattern */
- return 0;
-}
-
-static int ene_resume(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_setup_hw_settings(dev);
-
- if (dev->rx_enabled)
- ene_rx_enable(dev);
-
- ene_enable_wake(dev, false);
- return 0;
-}
-#endif
-
-static void ene_shutdown(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_enable_wake(dev, true);
-}
-
-static const struct pnp_device_id ene_ids[] = {
- {.id = "ENE0100",},
- {.id = "ENE0200",},
- {.id = "ENE0201",},
- {.id = "ENE0202",},
- {},
-};
-
-static struct pnp_driver ene_driver = {
- .name = ENE_DRIVER_NAME,
- .id_table = ene_ids,
- .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
-
- .probe = ene_probe,
- .remove = __devexit_p(ene_remove),
-#ifdef CONFIG_PM
- .suspend = ene_suspend,
- .resume = ene_resume,
-#endif
- .shutdown = ene_shutdown,
-};
-
-static int __init ene_init(void)
-{
- return pnp_register_driver(&ene_driver);
-}
-
-static void ene_exit(void)
-{
- pnp_unregister_driver(&ene_driver);
-}
-
-module_param(sample_period, int, S_IRUGO);
-MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
-
-module_param(learning_mode_force, bool, S_IRUGO);
-MODULE_PARM_DESC(learning_mode_force, "Enable learning mode by default");
-
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level");
-
-module_param(txsim, bool, S_IRUGO);
-MODULE_PARM_DESC(txsim,
- "Simulate TX features on unsupported hardware (dangerous)");
-
-MODULE_DEVICE_TABLE(pnp, ene_ids);
-MODULE_DESCRIPTION
- ("Infrared input driver for KB3926B/C/D/E/F "
- "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
-
-MODULE_AUTHOR("Maxim Levitsky");
-MODULE_LICENSE("GPL");
-
-module_init(ene_init);
-module_exit(ene_exit);
+++ /dev/null
-/*
- * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
- *
- * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-#include <linux/spinlock.h>
-
-
-/* hardware address */
-#define ENE_STATUS 0 /* hardware status - unused */
-#define ENE_ADDR_HI 1 /* hi byte of register address */
-#define ENE_ADDR_LO 2 /* low byte of register address */
-#define ENE_IO 3 /* read/write window */
-#define ENE_IO_SIZE 4
-
-/* 8 bytes of samples, divided in 2 packets*/
-#define ENE_FW_SAMPLE_BUFFER 0xF8F0 /* sample buffer */
-#define ENE_FW_SAMPLE_SPACE 0x80 /* sample is space */
-#define ENE_FW_PACKET_SIZE 4
-
-/* first firmware flag register */
-#define ENE_FW1 0xF8F8 /* flagr */
-#define ENE_FW1_ENABLE 0x01 /* enable fw processing */
-#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
-#define ENE_FW1_HAS_EXTRA_BUF 0x04 /* fw uses extra buffer*/
-#define ENE_FW1_EXTRA_BUF_HND 0x08 /* extra buffer handshake bit*/
-#define ENE_FW1_LED_ON 0x10 /* turn on a led */
-
-#define ENE_FW1_WPATTERN 0x20 /* enable wake pattern */
-#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */
-#define ENE_FW1_IRQ 0x80 /* enable interrupt */
-
-/* second firmware flag register */
-#define ENE_FW2 0xF8F9 /* flagw */
-#define ENE_FW2_BUF_WPTR 0x01 /* which half of the buffer to read */
-#define ENE_FW2_RXIRQ 0x04 /* RX IRQ pending*/
-#define ENE_FW2_GP0A 0x08 /* Use GPIO0A for demodulated input */
-#define ENE_FW2_EMMITER1_CONN 0x10 /* TX emmiter 1 connected */
-#define ENE_FW2_EMMITER2_CONN 0x20 /* TX emmiter 2 connected */
-
-#define ENE_FW2_FAN_INPUT 0x40 /* fan input used for demodulated data*/
-#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */
-
-/* firmware RX pointer for new style buffer */
-#define ENE_FW_RX_POINTER 0xF8FA
-
-/* high parts of samples for fan input (8 samples)*/
-#define ENE_FW_SMPL_BUF_FAN 0xF8FB
-#define ENE_FW_SMPL_BUF_FAN_PLS 0x8000 /* combined sample is pulse */
-#define ENE_FW_SMPL_BUF_FAN_MSK 0x0FFF /* combined sample maximum value */
-#define ENE_FW_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
-
-/* transmitter ports */
-#define ENE_GPIOFS1 0xFC01
-#define ENE_GPIOFS1_GPIO0D 0x20 /* enable tx output on GPIO0D */
-#define ENE_GPIOFS8 0xFC08
-#define ENE_GPIOFS8_GPIO41 0x02 /* enable tx output on GPIO40 */
-
-/* IRQ registers block (for revision B) */
-#define ENEB_IRQ 0xFD09 /* IRQ number */
-#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
-#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
-#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */
-
-/* fan as input settings */
-#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
-#define ENE_FAN_AS_IN1_EN 0xCD
-#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
-#define ENE_FAN_AS_IN2_EN 0x03
-
-/* IRQ registers block (for revision C,D) */
-#define ENE_IRQ 0xFE9B /* new irq settings register */
-#define ENE_IRQ_MASK 0x0F /* irq number mask */
-#define ENE_IRQ_UNK_EN 0x10 /* always enabled */
-#define ENE_IRQ_STATUS 0x20 /* irq status and ACK */
-
-/* CIR Config register #1 */
-#define ENE_CIRCFG 0xFEC0
-#define ENE_CIRCFG_RX_EN 0x01 /* RX enable */
-#define ENE_CIRCFG_RX_IRQ 0x02 /* Enable hardware interrupt */
-#define ENE_CIRCFG_REV_POL 0x04 /* Input polarity reversed */
-#define ENE_CIRCFG_CARR_DEMOD 0x08 /* Enable carrier demodulator */
-
-#define ENE_CIRCFG_TX_EN 0x10 /* TX enable */
-#define ENE_CIRCFG_TX_IRQ 0x20 /* Send interrupt on TX done */
-#define ENE_CIRCFG_TX_POL_REV 0x40 /* TX polarity reversed */
-#define ENE_CIRCFG_TX_CARR 0x80 /* send TX carrier or not */
-
-/* CIR config register #2 */
-#define ENE_CIRCFG2 0xFEC1
-#define ENE_CIRCFG2_RLC 0x00
-#define ENE_CIRCFG2_RC5 0x01
-#define ENE_CIRCFG2_RC6 0x02
-#define ENE_CIRCFG2_NEC 0x03
-#define ENE_CIRCFG2_CARR_DETECT 0x10 /* Enable carrier detection */
-#define ENE_CIRCFG2_GPIO0A 0x20 /* Use GPIO0A instead of GPIO40 for input */
-#define ENE_CIRCFG2_FAST_SAMPL1 0x40 /* Fast leading pulse detection for RC6 */
-#define ENE_CIRCFG2_FAST_SAMPL2 0x80 /* Fast data detection for RC6 */
-
-/* Knobs for protocol decoding - will document when/if will use them */
-#define ENE_CIRPF 0xFEC2
-#define ENE_CIRHIGH 0xFEC3
-#define ENE_CIRBIT 0xFEC4
-#define ENE_CIRSTART 0xFEC5
-#define ENE_CIRSTART2 0xFEC6
-
-/* Actual register which contains RLC RX data - read by firmware */
-#define ENE_CIRDAT_IN 0xFEC7
-
-
-/* RLC configuration - sample period (1us resulution) + idle mode */
-#define ENE_CIRRLC_CFG 0xFEC8
-#define ENE_CIRRLC_CFG_OVERFLOW 0x80 /* interrupt on overflows if set */
-#define ENE_DEFAULT_SAMPLE_PERIOD 50
-
-/* Two byte RLC TX buffer */
-#define ENE_CIRRLC_OUT0 0xFEC9
-#define ENE_CIRRLC_OUT1 0xFECA
-#define ENE_CIRRLC_OUT_PULSE 0x80 /* Transmitted sample is pulse */
-#define ENE_CIRRLC_OUT_MASK 0x7F
-
-
-/* Carrier detect setting
- * Low nibble - number of carrier pulses to average
- * High nibble - number of initial carrier pulses to discard
- */
-#define ENE_CIRCAR_PULS 0xFECB
-
-/* detected RX carrier period (resolution: 500 ns) */
-#define ENE_CIRCAR_PRD 0xFECC
-#define ENE_CIRCAR_PRD_VALID 0x80 /* data valid content valid */
-
-/* detected RX carrier pulse width (resolution: 500 ns) */
-#define ENE_CIRCAR_HPRD 0xFECD
-
-/* TX period (resolution: 500 ns, minimum 2)*/
-#define ENE_CIRMOD_PRD 0xFECE
-#define ENE_CIRMOD_PRD_POL 0x80 /* TX carrier polarity*/
-
-#define ENE_CIRMOD_PRD_MAX 0x7F /* 15.87 kHz */
-#define ENE_CIRMOD_PRD_MIN 0x02 /* 1 Mhz */
-
-/* TX pulse width (resolution: 500 ns)*/
-#define ENE_CIRMOD_HPRD 0xFECF
-
-/* Hardware versions */
-#define ENE_ECHV 0xFF00 /* hardware revision */
-#define ENE_PLLFRH 0xFF16
-#define ENE_PLLFRL 0xFF17
-#define ENE_DEFAULT_PLL_FREQ 1000
-
-#define ENE_ECSTS 0xFF1D
-#define ENE_ECSTS_RSRVD 0x04
-
-#define ENE_ECVER_MAJOR 0xFF1E /* chip version */
-#define ENE_ECVER_MINOR 0xFF1F
-#define ENE_HW_VER_OLD 0xFD00
-
-/******************************************************************************/
-
-#define ENE_DRIVER_NAME "ene_ir"
-
-#define ENE_IRQ_RX 1
-#define ENE_IRQ_TX 2
-
-#define ENE_HW_B 1 /* 3926B */
-#define ENE_HW_C 2 /* 3926C */
-#define ENE_HW_D 3 /* 3926D or later */
-
-#define ene_printk(level, text, ...) \
- printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__)
-
-#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__)
-#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__)
-
-
-#define __dbg(level, format, ...) \
- do { \
- if (debug >= level) \
- printk(KERN_DEBUG ENE_DRIVER_NAME \
- ": " format "\n", ## __VA_ARGS__); \
- } while (0)
-
-
-#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__)
-#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__)
-#define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__)
-
-#define MS_TO_NS(msec) ((msec) * 1000)
-
-struct ene_device {
- struct pnp_dev *pnp_dev;
- struct input_dev *idev;
- struct ir_dev_props *props;
-
- /* hw IO settings */
- long hw_io;
- int irq;
- spinlock_t hw_lock;
-
- /* HW features */
- int hw_revision; /* hardware revision */
- bool hw_use_gpio_0a; /* gpio0a is demodulated input*/
- bool hw_extra_buffer; /* hardware has 'extra buffer' */
- bool hw_fan_input; /* fan input is IR data source */
- bool hw_learning_and_tx_capable; /* learning & tx capable */
- int pll_freq;
- int buffer_len;
-
- /* Extra RX buffer location */
- int extra_buf1_address;
- int extra_buf1_len;
- int extra_buf2_address;
- int extra_buf2_len;
-
- /* HW state*/
- int r_pointer; /* pointer to next sample to read */
- int w_pointer; /* pointer to next sample hw will write */
- bool rx_fan_input_inuse; /* is fan input in use for rx*/
- int tx_reg; /* current reg used for TX */
- u8 saved_conf1; /* saved FEC0 reg */
- unsigned int tx_sample; /* current sample for TX */
- bool tx_sample_pulse; /* current sample is pulse */
-
- /* TX buffer */
- int *tx_buffer; /* input samples buffer*/
- int tx_pos; /* position in that bufer */
- int tx_len; /* current len of tx buffer */
- int tx_done; /* done transmitting */
- /* one more sample pending*/
- struct completion tx_complete; /* TX completion */
- struct timer_list tx_sim_timer;
-
- /* TX settings */
- int tx_period;
- int tx_duty_cycle;
- int transmitter_mask;
-
- /* RX settings */
- bool learning_mode_enabled; /* learning input enabled */
- bool carrier_detect_enabled; /* carrier detect enabled */
- int rx_period_adjust;
- bool rx_enabled;
-};
-
-static int ene_irq_status(struct ene_device *dev);
-static void ene_rx_read_hw_pointer(struct ene_device *dev);
+++ /dev/null
-/*
- * imon.c: input and display driver for SoundGraph iMON IR/VFD/LCD
- *
- * Copyright(C) 2010 Jarod Wilson <jarod@wilsonet.com>
- * Portions based on the original lirc_imon driver,
- * Copyright(C) 2004 Venky Raju(dev@venky.ws)
- *
- * Huge thanks to R. Geoff Newbury for invaluable debugging on the
- * 0xffdc iMON devices, and for sending me one to hack on, without
- * which the support for them wouldn't be nearly as good. Thanks
- * also to the numerous 0xffdc device owners that tested auto-config
- * support for me and provided debug dumps from their devices.
- *
- * imon is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/ir-core.h>
-
-#include <linux/time.h>
-#include <linux/timer.h>
-
-#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
-#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
-#define MOD_NAME "imon"
-#define MOD_VERSION "0.9.2"
-
-#define DISPLAY_MINOR_BASE 144
-#define DEVICE_NAME "lcd%d"
-
-#define BUF_CHUNK_SIZE 8
-#define BUF_SIZE 128
-
-#define BIT_DURATION 250 /* each bit received is 250us */
-
-#define IMON_CLOCK_ENABLE_PACKETS 2
-
-/*** P R O T O T Y P E S ***/
-
-/* USB Callback prototypes */
-static int imon_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-static void imon_disconnect(struct usb_interface *interface);
-static void usb_rx_callback_intf0(struct urb *urb);
-static void usb_rx_callback_intf1(struct urb *urb);
-static void usb_tx_callback(struct urb *urb);
-
-/* suspend/resume support */
-static int imon_resume(struct usb_interface *intf);
-static int imon_suspend(struct usb_interface *intf, pm_message_t message);
-
-/* Display file_operations function prototypes */
-static int display_open(struct inode *inode, struct file *file);
-static int display_close(struct inode *inode, struct file *file);
-
-/* VFD write operation */
-static ssize_t vfd_write(struct file *file, const char *buf,
- size_t n_bytes, loff_t *pos);
-
-/* LCD file_operations override function prototypes */
-static ssize_t lcd_write(struct file *file, const char *buf,
- size_t n_bytes, loff_t *pos);
-
-/*** G L O B A L S ***/
-
-struct imon_context {
- struct device *dev;
- struct ir_dev_props *props;
- /* Newer devices have two interfaces */
- struct usb_device *usbdev_intf0;
- struct usb_device *usbdev_intf1;
-
- bool display_supported; /* not all controllers do */
- bool display_isopen; /* display port has been opened */
- bool rf_device; /* true if iMON 2.4G LT/DT RF device */
- bool rf_isassociating; /* RF remote associating */
- bool dev_present_intf0; /* USB device presence, interface 0 */
- bool dev_present_intf1; /* USB device presence, interface 1 */
-
- struct mutex lock; /* to lock this object */
- wait_queue_head_t remove_ok; /* For unexpected USB disconnects */
-
- struct usb_endpoint_descriptor *rx_endpoint_intf0;
- struct usb_endpoint_descriptor *rx_endpoint_intf1;
- struct usb_endpoint_descriptor *tx_endpoint;
- struct urb *rx_urb_intf0;
- struct urb *rx_urb_intf1;
- struct urb *tx_urb;
- bool tx_control;
- unsigned char usb_rx_buf[8];
- unsigned char usb_tx_buf[8];
-
- struct tx_t {
- unsigned char data_buf[35]; /* user data buffer */
- struct completion finished; /* wait for write to finish */
- bool busy; /* write in progress */
- int status; /* status of tx completion */
- } tx;
-
- u16 vendor; /* usb vendor ID */
- u16 product; /* usb product ID */
-
- struct input_dev *rdev; /* input device for remote */
- struct input_dev *idev; /* input device for panel & IR mouse */
- struct input_dev *touch; /* input device for touchscreen */
-
- spinlock_t kc_lock; /* make sure we get keycodes right */
- u32 kc; /* current input keycode */
- u32 last_keycode; /* last reported input keycode */
- u32 rc_scancode; /* the computed remote scancode */
- u8 rc_toggle; /* the computed remote toggle bit */
- u64 ir_type; /* iMON or MCE (RC6) IR protocol? */
- bool release_code; /* some keys send a release code */
-
- u8 display_type; /* store the display type */
- bool pad_mouse; /* toggle kbd(0)/mouse(1) mode */
-
- char name_rdev[128]; /* rc input device name */
- char phys_rdev[64]; /* rc input device phys path */
-
- char name_idev[128]; /* input device name */
- char phys_idev[64]; /* input device phys path */
-
- char name_touch[128]; /* touch screen name */
- char phys_touch[64]; /* touch screen phys path */
- struct timer_list ttimer; /* touch screen timer */
- int touch_x; /* x coordinate on touchscreen */
- int touch_y; /* y coordinate on touchscreen */
-};
-
-#define TOUCH_TIMEOUT (HZ/30)
-
-/* vfd character device file operations */
-static const struct file_operations vfd_fops = {
- .owner = THIS_MODULE,
- .open = &display_open,
- .write = &vfd_write,
- .release = &display_close,
- .llseek = noop_llseek,
-};
-
-/* lcd character device file operations */
-static const struct file_operations lcd_fops = {
- .owner = THIS_MODULE,
- .open = &display_open,
- .write = &lcd_write,
- .release = &display_close,
- .llseek = noop_llseek,
-};
-
-enum {
- IMON_DISPLAY_TYPE_AUTO = 0,
- IMON_DISPLAY_TYPE_VFD = 1,
- IMON_DISPLAY_TYPE_LCD = 2,
- IMON_DISPLAY_TYPE_VGA = 3,
- IMON_DISPLAY_TYPE_NONE = 4,
-};
-
-enum {
- IMON_KEY_IMON = 0,
- IMON_KEY_MCE = 1,
- IMON_KEY_PANEL = 2,
-};
-
-/*
- * USB Device ID for iMON USB Control Boards
- *
- * The Windows drivers contain 6 different inf files, more or less one for
- * each new device until the 0x0034-0x0046 devices, which all use the same
- * driver. Some of the devices in the 34-46 range haven't been definitively
- * identified yet. Early devices have either a TriGem Computer, Inc. or a
- * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
- * devices use the SoundGraph vendor ID (0x15c2). This driver only supports
- * the ffdc and later devices, which do onboard decoding.
- */
-static struct usb_device_id imon_usb_id_table[] = {
- /*
- * Several devices with this same device ID, all use iMON_PAD.inf
- * SoundGraph iMON PAD (IR & VFD)
- * SoundGraph iMON PAD (IR & LCD)
- * SoundGraph iMON Knob (IR only)
- */
- { USB_DEVICE(0x15c2, 0xffdc) },
-
- /*
- * Newer devices, all driven by the latest iMON Windows driver, full
- * list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2'
- * Need user input to fill in details on unknown devices.
- */
- /* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */
- { USB_DEVICE(0x15c2, 0x0034) },
- /* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */
- { USB_DEVICE(0x15c2, 0x0035) },
- /* SoundGraph iMON OEM VFD (IR & VFD) */
- { USB_DEVICE(0x15c2, 0x0036) },
- /* device specifics unknown */
- { USB_DEVICE(0x15c2, 0x0037) },
- /* SoundGraph iMON OEM LCD (IR & LCD) */
- { USB_DEVICE(0x15c2, 0x0038) },
- /* SoundGraph iMON UltraBay (IR & LCD) */
- { USB_DEVICE(0x15c2, 0x0039) },
- /* device specifics unknown */
- { USB_DEVICE(0x15c2, 0x003a) },
- /* device specifics unknown */
- { USB_DEVICE(0x15c2, 0x003b) },
- /* SoundGraph iMON OEM Inside (IR only) */
- { USB_DEVICE(0x15c2, 0x003c) },
- /* device specifics unknown */
- { USB_DEVICE(0x15c2, 0x003d) },
- /* device specifics unknown */
- { USB_DEVICE(0x15c2, 0x003e) },
- /* device specifics unknown */
- { USB_DEVICE(0x15c2, 0x003f) },
- /* device specifics unknown */
- { USB_DEVICE(0x15c2, 0x0040) },
- /* SoundGraph iMON MINI (IR only) */
- { USB_DEVICE(0x15c2, 0x0041) },
- /* Antec Veris Multimedia Station EZ External (IR only) */
- { USB_DEVICE(0x15c2, 0x0042) },
- /* Antec Veris Multimedia Station Basic Internal (IR only) */
- { USB_DEVICE(0x15c2, 0x0043) },
- /* Antec Veris Multimedia Station Elite (IR & VFD) */
- { USB_DEVICE(0x15c2, 0x0044) },
- /* Antec Veris Multimedia Station Premiere (IR & LCD) */
- { USB_DEVICE(0x15c2, 0x0045) },
- /* device specifics unknown */
- { USB_DEVICE(0x15c2, 0x0046) },
- {}
-};
-
-/* USB Device data */
-static struct usb_driver imon_driver = {
- .name = MOD_NAME,
- .probe = imon_probe,
- .disconnect = imon_disconnect,
- .suspend = imon_suspend,
- .resume = imon_resume,
- .id_table = imon_usb_id_table,
-};
-
-static struct usb_class_driver imon_vfd_class = {
- .name = DEVICE_NAME,
- .fops = &vfd_fops,
- .minor_base = DISPLAY_MINOR_BASE,
-};
-
-static struct usb_class_driver imon_lcd_class = {
- .name = DEVICE_NAME,
- .fops = &lcd_fops,
- .minor_base = DISPLAY_MINOR_BASE,
-};
-
-/* imon receiver front panel/knob key table */
-static const struct {
- u64 hw_code;
- u32 keycode;
-} imon_panel_key_table[] = {
- { 0x000000000f00ffeell, KEY_PROG1 }, /* Go */
- { 0x000000001f00ffeell, KEY_AUDIO },
- { 0x000000002000ffeell, KEY_VIDEO },
- { 0x000000002100ffeell, KEY_CAMERA },
- { 0x000000002700ffeell, KEY_DVD },
- { 0x000000002300ffeell, KEY_TV },
- { 0x000000000500ffeell, KEY_PREVIOUS },
- { 0x000000000700ffeell, KEY_REWIND },
- { 0x000000000400ffeell, KEY_STOP },
- { 0x000000003c00ffeell, KEY_PLAYPAUSE },
- { 0x000000000800ffeell, KEY_FASTFORWARD },
- { 0x000000000600ffeell, KEY_NEXT },
- { 0x000000010000ffeell, KEY_RIGHT },
- { 0x000001000000ffeell, KEY_LEFT },
- { 0x000000003d00ffeell, KEY_SELECT },
- { 0x000100000000ffeell, KEY_VOLUMEUP },
- { 0x010000000000ffeell, KEY_VOLUMEDOWN },
- { 0x000000000100ffeell, KEY_MUTE },
- /* 0xffdc iMON MCE VFD */
- { 0x00010000ffffffeell, KEY_VOLUMEUP },
- { 0x01000000ffffffeell, KEY_VOLUMEDOWN },
- /* iMON Knob values */
- { 0x000100ffffffffeell, KEY_VOLUMEUP },
- { 0x010000ffffffffeell, KEY_VOLUMEDOWN },
- { 0x000008ffffffffeell, KEY_MUTE },
-};
-
-/* to prevent races between open() and disconnect(), probing, etc */
-static DEFINE_MUTEX(driver_lock);
-
-/* Module bookkeeping bits */
-MODULE_AUTHOR(MOD_AUTHOR);
-MODULE_DESCRIPTION(MOD_DESC);
-MODULE_VERSION(MOD_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
-
-static bool debug;
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)");
-
-/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
-static int display_type;
-module_param(display_type, int, S_IRUGO);
-MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, "
- "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
-
-static int pad_stabilize = 1;
-module_param(pad_stabilize, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD "
- "presses in arrow key mode. 0=disable, 1=enable (default).");
-
-/*
- * In certain use cases, mouse mode isn't really helpful, and could actually
- * cause confusion, so allow disabling it when the IR device is open.
- */
-static bool nomouse;
-module_param(nomouse, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is "
- "open. 0=don't disable, 1=disable. (default: don't disable)");
-
-/* threshold at which a pad push registers as an arrow key in kbd mode */
-static int pad_thresh;
-module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an "
- "arrow key in kbd mode (default: 28)");
-
-
-static void free_imon_context(struct imon_context *ictx)
-{
- struct device *dev = ictx->dev;
-
- usb_free_urb(ictx->tx_urb);
- usb_free_urb(ictx->rx_urb_intf0);
- usb_free_urb(ictx->rx_urb_intf1);
- kfree(ictx);
-
- dev_dbg(dev, "%s: iMON context freed\n", __func__);
-}
-
-/**
- * Called when the Display device (e.g. /dev/lcd0)
- * is opened by the application.
- */
-static int display_open(struct inode *inode, struct file *file)
-{
- struct usb_interface *interface;
- struct imon_context *ictx = NULL;
- int subminor;
- int retval = 0;
-
- /* prevent races with disconnect */
- mutex_lock(&driver_lock);
-
- subminor = iminor(inode);
- interface = usb_find_interface(&imon_driver, subminor);
- if (!interface) {
- pr_err("could not find interface for minor %d\n", subminor);
- retval = -ENODEV;
- goto exit;
- }
- ictx = usb_get_intfdata(interface);
-
- if (!ictx) {
- pr_err("no context found for minor %d\n", subminor);
- retval = -ENODEV;
- goto exit;
- }
-
- mutex_lock(&ictx->lock);
-
- if (!ictx->display_supported) {
- pr_err("display not supported by device\n");
- retval = -ENODEV;
- } else if (ictx->display_isopen) {
- pr_err("display port is already open\n");
- retval = -EBUSY;
- } else {
- ictx->display_isopen = true;
- file->private_data = ictx;
- dev_dbg(ictx->dev, "display port opened\n");
- }
-
- mutex_unlock(&ictx->lock);
-
-exit:
- mutex_unlock(&driver_lock);
- return retval;
-}
-
-/**
- * Called when the display device (e.g. /dev/lcd0)
- * is closed by the application.
- */
-static int display_close(struct inode *inode, struct file *file)
-{
- struct imon_context *ictx = NULL;
- int retval = 0;
-
- ictx = file->private_data;
-
- if (!ictx) {
- pr_err("no context for device\n");
- return -ENODEV;
- }
-
- mutex_lock(&ictx->lock);
-
- if (!ictx->display_supported) {
- pr_err("display not supported by device\n");
- retval = -ENODEV;
- } else if (!ictx->display_isopen) {
- pr_err("display is not open\n");
- retval = -EIO;
- } else {
- ictx->display_isopen = false;
- dev_dbg(ictx->dev, "display port closed\n");
- if (!ictx->dev_present_intf0) {
- /*
- * Device disconnected before close and IR port is not
- * open. If IR port is open, context will be deleted by
- * ir_close.
- */
- mutex_unlock(&ictx->lock);
- free_imon_context(ictx);
- return retval;
- }
- }
-
- mutex_unlock(&ictx->lock);
- return retval;
-}
-
-/**
- * Sends a packet to the device -- this function must be called
- * with ictx->lock held.
- */
-static int send_packet(struct imon_context *ictx)
-{
- unsigned int pipe;
- unsigned long timeout;
- int interval = 0;
- int retval = 0;
- struct usb_ctrlrequest *control_req = NULL;
-
- /* Check if we need to use control or interrupt urb */
- if (!ictx->tx_control) {
- pipe = usb_sndintpipe(ictx->usbdev_intf0,
- ictx->tx_endpoint->bEndpointAddress);
- interval = ictx->tx_endpoint->bInterval;
-
- usb_fill_int_urb(ictx->tx_urb, ictx->usbdev_intf0, pipe,
- ictx->usb_tx_buf,
- sizeof(ictx->usb_tx_buf),
- usb_tx_callback, ictx, interval);
-
- ictx->tx_urb->actual_length = 0;
- } else {
- /* fill request into kmalloc'ed space: */
- control_req = kmalloc(sizeof(struct usb_ctrlrequest),
- GFP_KERNEL);
- if (control_req == NULL)
- return -ENOMEM;
-
- /* setup packet is '21 09 0200 0001 0008' */
- control_req->bRequestType = 0x21;
- control_req->bRequest = 0x09;
- control_req->wValue = cpu_to_le16(0x0200);
- control_req->wIndex = cpu_to_le16(0x0001);
- control_req->wLength = cpu_to_le16(0x0008);
-
- /* control pipe is endpoint 0x00 */
- pipe = usb_sndctrlpipe(ictx->usbdev_intf0, 0);
-
- /* build the control urb */
- usb_fill_control_urb(ictx->tx_urb, ictx->usbdev_intf0,
- pipe, (unsigned char *)control_req,
- ictx->usb_tx_buf,
- sizeof(ictx->usb_tx_buf),
- usb_tx_callback, ictx);
- ictx->tx_urb->actual_length = 0;
- }
-
- init_completion(&ictx->tx.finished);
- ictx->tx.busy = true;
- smp_rmb(); /* ensure later readers know we're busy */
-
- retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
- if (retval) {
- ictx->tx.busy = false;
- smp_rmb(); /* ensure later readers know we're not busy */
- pr_err("error submitting urb(%d)\n", retval);
- } else {
- /* Wait for transmission to complete (or abort) */
- mutex_unlock(&ictx->lock);
- retval = wait_for_completion_interruptible(
- &ictx->tx.finished);
- if (retval)
- pr_err("task interrupted\n");
- mutex_lock(&ictx->lock);
-
- retval = ictx->tx.status;
- if (retval)
- pr_err("packet tx failed (%d)\n", retval);
- }
-
- kfree(control_req);
-
- /*
- * Induce a mandatory 5ms delay before returning, as otherwise,
- * send_packet can get called so rapidly as to overwhelm the device,
- * particularly on faster systems and/or those with quirky usb.
- */
- timeout = msecs_to_jiffies(5);
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(timeout);
-
- return retval;
-}
-
-/**
- * Sends an associate packet to the iMON 2.4G.
- *
- * This might not be such a good idea, since it has an id collision with
- * some versions of the "IR & VFD" combo. The only way to determine if it
- * is an RF version is to look at the product description string. (Which
- * we currently do not fetch).
- */
-static int send_associate_24g(struct imon_context *ictx)
-{
- int retval;
- const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x20 };
-
- if (!ictx) {
- pr_err("no context for device\n");
- return -ENODEV;
- }
-
- if (!ictx->dev_present_intf0) {
- pr_err("no iMON device present\n");
- return -ENODEV;
- }
-
- memcpy(ictx->usb_tx_buf, packet, sizeof(packet));
- retval = send_packet(ictx);
-
- return retval;
-}
-
-/**
- * Sends packets to setup and show clock on iMON display
- *
- * Arguments: year - last 2 digits of year, month - 1..12,
- * day - 1..31, dow - day of the week (0-Sun...6-Sat),
- * hour - 0..23, minute - 0..59, second - 0..59
- */
-static int send_set_imon_clock(struct imon_context *ictx,
- unsigned int year, unsigned int month,
- unsigned int day, unsigned int dow,
- unsigned int hour, unsigned int minute,
- unsigned int second)
-{
- unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8];
- int retval = 0;
- int i;
-
- if (!ictx) {
- pr_err("no context for device\n");
- return -ENODEV;
- }
-
- switch (ictx->display_type) {
- case IMON_DISPLAY_TYPE_LCD:
- clock_enable_pkt[0][0] = 0x80;
- clock_enable_pkt[0][1] = year;
- clock_enable_pkt[0][2] = month-1;
- clock_enable_pkt[0][3] = day;
- clock_enable_pkt[0][4] = hour;
- clock_enable_pkt[0][5] = minute;
- clock_enable_pkt[0][6] = second;
-
- clock_enable_pkt[1][0] = 0x80;
- clock_enable_pkt[1][1] = 0;
- clock_enable_pkt[1][2] = 0;
- clock_enable_pkt[1][3] = 0;
- clock_enable_pkt[1][4] = 0;
- clock_enable_pkt[1][5] = 0;
- clock_enable_pkt[1][6] = 0;
-
- if (ictx->product == 0xffdc) {
- clock_enable_pkt[0][7] = 0x50;
- clock_enable_pkt[1][7] = 0x51;
- } else {
- clock_enable_pkt[0][7] = 0x88;
- clock_enable_pkt[1][7] = 0x8a;
- }
-
- break;
-
- case IMON_DISPLAY_TYPE_VFD:
- clock_enable_pkt[0][0] = year;
- clock_enable_pkt[0][1] = month-1;
- clock_enable_pkt[0][2] = day;
- clock_enable_pkt[0][3] = dow;
- clock_enable_pkt[0][4] = hour;
- clock_enable_pkt[0][5] = minute;
- clock_enable_pkt[0][6] = second;
- clock_enable_pkt[0][7] = 0x40;
-
- clock_enable_pkt[1][0] = 0;
- clock_enable_pkt[1][1] = 0;
- clock_enable_pkt[1][2] = 1;
- clock_enable_pkt[1][3] = 0;
- clock_enable_pkt[1][4] = 0;
- clock_enable_pkt[1][5] = 0;
- clock_enable_pkt[1][6] = 0;
- clock_enable_pkt[1][7] = 0x42;
-
- break;
-
- default:
- return -ENODEV;
- }
-
- for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) {
- memcpy(ictx->usb_tx_buf, clock_enable_pkt[i], 8);
- retval = send_packet(ictx);
- if (retval) {
- pr_err("send_packet failed for packet %d\n", i);
- break;
- }
- }
-
- return retval;
-}
-
-/**
- * These are the sysfs functions to handle the association on the iMON 2.4G LT.
- */
-static ssize_t show_associate_remote(struct device *d,
- struct device_attribute *attr,
- char *buf)
-{
- struct imon_context *ictx = dev_get_drvdata(d);
-
- if (!ictx)
- return -ENODEV;
-
- mutex_lock(&ictx->lock);
- if (ictx->rf_isassociating)
- strcpy(buf, "associating\n");
- else
- strcpy(buf, "closed\n");
-
- dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for "
- "instructions on how to associate your iMON 2.4G DT/LT "
- "remote\n");
- mutex_unlock(&ictx->lock);
- return strlen(buf);
-}
-
-static ssize_t store_associate_remote(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct imon_context *ictx;
-
- ictx = dev_get_drvdata(d);
-
- if (!ictx)
- return -ENODEV;
-
- mutex_lock(&ictx->lock);
- ictx->rf_isassociating = true;
- send_associate_24g(ictx);
- mutex_unlock(&ictx->lock);
-
- return count;
-}
-
-/**
- * sysfs functions to control internal imon clock
- */
-static ssize_t show_imon_clock(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct imon_context *ictx = dev_get_drvdata(d);
- size_t len;
-
- if (!ictx)
- return -ENODEV;
-
- mutex_lock(&ictx->lock);
-
- if (!ictx->display_supported) {
- len = snprintf(buf, PAGE_SIZE, "Not supported.");
- } else {
- len = snprintf(buf, PAGE_SIZE,
- "To set the clock on your iMON display:\n"
- "# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n"
- "%s", ictx->display_isopen ?
- "\nNOTE: imon device must be closed\n" : "");
- }
-
- mutex_unlock(&ictx->lock);
-
- return len;
-}
-
-static ssize_t store_imon_clock(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct imon_context *ictx = dev_get_drvdata(d);
- ssize_t retval;
- unsigned int year, month, day, dow, hour, minute, second;
-
- if (!ictx)
- return -ENODEV;
-
- mutex_lock(&ictx->lock);
-
- if (!ictx->display_supported) {
- retval = -ENODEV;
- goto exit;
- } else if (ictx->display_isopen) {
- retval = -EBUSY;
- goto exit;
- }
-
- if (sscanf(buf, "%u %u %u %u %u %u %u", &year, &month, &day, &dow,
- &hour, &minute, &second) != 7) {
- retval = -EINVAL;
- goto exit;
- }
-
- if ((month < 1 || month > 12) ||
- (day < 1 || day > 31) || (dow > 6) ||
- (hour > 23) || (minute > 59) || (second > 59)) {
- retval = -EINVAL;
- goto exit;
- }
-
- retval = send_set_imon_clock(ictx, year, month, day, dow,
- hour, minute, second);
- if (retval)
- goto exit;
-
- retval = count;
-exit:
- mutex_unlock(&ictx->lock);
-
- return retval;
-}
-
-
-static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock,
- store_imon_clock);
-
-static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote,
- store_associate_remote);
-
-static struct attribute *imon_display_sysfs_entries[] = {
- &dev_attr_imon_clock.attr,
- NULL
-};
-
-static struct attribute_group imon_display_attr_group = {
- .attrs = imon_display_sysfs_entries
-};
-
-static struct attribute *imon_rf_sysfs_entries[] = {
- &dev_attr_associate_remote.attr,
- NULL
-};
-
-static struct attribute_group imon_rf_attr_group = {
- .attrs = imon_rf_sysfs_entries
-};
-
-/**
- * Writes data to the VFD. The iMON VFD is 2x16 characters
- * and requires data in 5 consecutive USB interrupt packets,
- * each packet but the last carrying 7 bytes.
- *
- * I don't know if the VFD board supports features such as
- * scrolling, clearing rows, blanking, etc. so at
- * the caller must provide a full screen of data. If fewer
- * than 32 bytes are provided spaces will be appended to
- * generate a full screen.
- */
-static ssize_t vfd_write(struct file *file, const char *buf,
- size_t n_bytes, loff_t *pos)
-{
- int i;
- int offset;
- int seq;
- int retval = 0;
- struct imon_context *ictx;
- const unsigned char vfd_packet6[] = {
- 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
-
- ictx = file->private_data;
- if (!ictx) {
- pr_err("no context for device\n");
- return -ENODEV;
- }
-
- mutex_lock(&ictx->lock);
-
- if (!ictx->dev_present_intf0) {
- pr_err("no iMON device present\n");
- retval = -ENODEV;
- goto exit;
- }
-
- if (n_bytes <= 0 || n_bytes > 32) {
- pr_err("invalid payload size\n");
- retval = -EINVAL;
- goto exit;
- }
-
- if (copy_from_user(ictx->tx.data_buf, buf, n_bytes)) {
- retval = -EFAULT;
- goto exit;
- }
-
- /* Pad with spaces */
- for (i = n_bytes; i < 32; ++i)
- ictx->tx.data_buf[i] = ' ';
-
- for (i = 32; i < 35; ++i)
- ictx->tx.data_buf[i] = 0xFF;
-
- offset = 0;
- seq = 0;
-
- do {
- memcpy(ictx->usb_tx_buf, ictx->tx.data_buf + offset, 7);
- ictx->usb_tx_buf[7] = (unsigned char) seq;
-
- retval = send_packet(ictx);
- if (retval) {
- pr_err("send packet failed for packet #%d\n", seq / 2);
- goto exit;
- } else {
- seq += 2;
- offset += 7;
- }
-
- } while (offset < 35);
-
- /* Send packet #6 */
- memcpy(ictx->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
- ictx->usb_tx_buf[7] = (unsigned char) seq;
- retval = send_packet(ictx);
- if (retval)
- pr_err("send packet failed for packet #%d\n", seq / 2);
-
-exit:
- mutex_unlock(&ictx->lock);
-
- return (!retval) ? n_bytes : retval;
-}
-
-/**
- * Writes data to the LCD. The iMON OEM LCD screen expects 8-byte
- * packets. We accept data as 16 hexadecimal digits, followed by a
- * newline (to make it easy to drive the device from a command-line
- * -- even though the actual binary data is a bit complicated).
- *
- * The device itself is not a "traditional" text-mode display. It's
- * actually a 16x96 pixel bitmap display. That means if you want to
- * display text, you've got to have your own "font" and translate the
- * text into bitmaps for display. This is really flexible (you can
- * display whatever diacritics you need, and so on), but it's also
- * a lot more complicated than most LCDs...
- */
-static ssize_t lcd_write(struct file *file, const char *buf,
- size_t n_bytes, loff_t *pos)
-{
- int retval = 0;
- struct imon_context *ictx;
-
- ictx = file->private_data;
- if (!ictx) {
- pr_err("no context for device\n");
- return -ENODEV;
- }
-
- mutex_lock(&ictx->lock);
-
- if (!ictx->display_supported) {
- pr_err("no iMON display present\n");
- retval = -ENODEV;
- goto exit;
- }
-
- if (n_bytes != 8) {
- pr_err("invalid payload size: %d (expected 8)\n", (int)n_bytes);
- retval = -EINVAL;
- goto exit;
- }
-
- if (copy_from_user(ictx->usb_tx_buf, buf, 8)) {
- retval = -EFAULT;
- goto exit;
- }
-
- retval = send_packet(ictx);
- if (retval) {
- pr_err("send packet failed!\n");
- goto exit;
- } else {
- dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n",
- __func__, (int) n_bytes);
- }
-exit:
- mutex_unlock(&ictx->lock);
- return (!retval) ? n_bytes : retval;
-}
-
-/**
- * Callback function for USB core API: transmit data
- */
-static void usb_tx_callback(struct urb *urb)
-{
- struct imon_context *ictx;
-
- if (!urb)
- return;
- ictx = (struct imon_context *)urb->context;
- if (!ictx)
- return;
-
- ictx->tx.status = urb->status;
-
- /* notify waiters that write has finished */
- ictx->tx.busy = false;
- smp_rmb(); /* ensure later readers know we're not busy */
- complete(&ictx->tx.finished);
-}
-
-/**
- * report touchscreen input
- */
-static void imon_touch_display_timeout(unsigned long data)
-{
- struct imon_context *ictx = (struct imon_context *)data;
-
- if (ictx->display_type != IMON_DISPLAY_TYPE_VGA)
- return;
-
- input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
- input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
- input_report_key(ictx->touch, BTN_TOUCH, 0x00);
- input_sync(ictx->touch);
-}
-
-/**
- * iMON IR receivers support two different signal sets -- those used by
- * the iMON remotes, and those used by the Windows MCE remotes (which is
- * really just RC-6), but only one or the other at a time, as the signals
- * are decoded onboard the receiver.
- */
-int imon_ir_change_protocol(void *priv, u64 ir_type)
-{
- int retval;
- struct imon_context *ictx = priv;
- struct device *dev = ictx->dev;
- bool pad_mouse;
- unsigned char ir_proto_packet[] = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
-
- if (ir_type && !(ir_type & ictx->props->allowed_protos))
- dev_warn(dev, "Looks like you're trying to use an IR protocol "
- "this device does not support\n");
-
- switch (ir_type) {
- case IR_TYPE_RC6:
- dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
- ir_proto_packet[0] = 0x01;
- pad_mouse = false;
- break;
- case IR_TYPE_UNKNOWN:
- case IR_TYPE_OTHER:
- dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
- if (pad_stabilize && !nomouse)
- pad_mouse = true;
- else {
- dev_dbg(dev, "PAD stabilize functionality disabled\n");
- pad_mouse = false;
- }
- /* ir_proto_packet[0] = 0x00; // already the default */
- ir_type = IR_TYPE_OTHER;
- break;
- default:
- dev_warn(dev, "Unsupported IR protocol specified, overriding "
- "to iMON IR protocol\n");
- if (pad_stabilize && !nomouse)
- pad_mouse = true;
- else {
- dev_dbg(dev, "PAD stabilize functionality disabled\n");
- pad_mouse = false;
- }
- /* ir_proto_packet[0] = 0x00; // already the default */
- ir_type = IR_TYPE_OTHER;
- break;
- }
-
- memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
-
- retval = send_packet(ictx);
- if (retval)
- goto out;
-
- ictx->ir_type = ir_type;
- ictx->pad_mouse = pad_mouse;
-
-out:
- return retval;
-}
-
-static inline int tv2int(const struct timeval *a, const struct timeval *b)
-{
- int usecs = 0;
- int sec = 0;
-
- if (b->tv_usec > a->tv_usec) {
- usecs = 1000000;
- sec--;
- }
-
- usecs += a->tv_usec - b->tv_usec;
-
- sec += a->tv_sec - b->tv_sec;
- sec *= 1000;
- usecs /= 1000;
- sec += usecs;
-
- if (sec < 0)
- sec = 1000;
-
- return sec;
-}
-
-/**
- * The directional pad behaves a bit differently, depending on whether this is
- * one of the older ffdc devices or a newer device. Newer devices appear to
- * have a higher resolution matrix for more precise mouse movement, but it
- * makes things overly sensitive in keyboard mode, so we do some interesting
- * contortions to make it less touchy. Older devices run through the same
- * routine with shorter timeout and a smaller threshold.
- */
-static int stabilize(int a, int b, u16 timeout, u16 threshold)
-{
- struct timeval ct;
- static struct timeval prev_time = {0, 0};
- static struct timeval hit_time = {0, 0};
- static int x, y, prev_result, hits;
- int result = 0;
- int msec, msec_hit;
-
- do_gettimeofday(&ct);
- msec = tv2int(&ct, &prev_time);
- msec_hit = tv2int(&ct, &hit_time);
-
- if (msec > 100) {
- x = 0;
- y = 0;
- hits = 0;
- }
-
- x += a;
- y += b;
-
- prev_time = ct;
-
- if (abs(x) > threshold || abs(y) > threshold) {
- if (abs(y) > abs(x))
- result = (y > 0) ? 0x7F : 0x80;
- else
- result = (x > 0) ? 0x7F00 : 0x8000;
-
- x = 0;
- y = 0;
-
- if (result == prev_result) {
- hits++;
-
- if (hits > 3) {
- switch (result) {
- case 0x7F:
- y = 17 * threshold / 30;
- break;
- case 0x80:
- y -= 17 * threshold / 30;
- break;
- case 0x7F00:
- x = 17 * threshold / 30;
- break;
- case 0x8000:
- x -= 17 * threshold / 30;
- break;
- }
- }
-
- if (hits == 2 && msec_hit < timeout) {
- result = 0;
- hits = 1;
- }
- } else {
- prev_result = result;
- hits = 1;
- hit_time = ct;
- }
- }
-
- return result;
-}
-
-static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode)
-{
- u32 keycode;
- u32 release;
- bool is_release_code = false;
-
- /* Look for the initial press of a button */
- keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
- ictx->rc_toggle = 0x0;
- ictx->rc_scancode = scancode;
-
- /* Look for the release of a button */
- if (keycode == KEY_RESERVED) {
- release = scancode & ~0x4000;
- keycode = ir_g_keycode_from_table(ictx->rdev, release);
- if (keycode != KEY_RESERVED)
- is_release_code = true;
- }
-
- ictx->release_code = is_release_code;
-
- return keycode;
-}
-
-static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode)
-{
- u32 keycode;
-
-#define MCE_KEY_MASK 0x7000
-#define MCE_TOGGLE_BIT 0x8000
-
- /*
- * On some receivers, mce keys decode to 0x8000f04xx and 0x8000f84xx
- * (the toggle bit flipping between alternating key presses), while
- * on other receivers, we see 0x8000f74xx and 0x8000ff4xx. To keep
- * the table trim, we always or in the bits to look up 0x8000ff4xx,
- * but we can't or them into all codes, as some keys are decoded in
- * a different way w/o the same use of the toggle bit...
- */
- if (scancode & 0x80000000)
- scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
-
- ictx->rc_scancode = scancode;
- keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
-
- /* not used in mce mode, but make sure we know its false */
- ictx->release_code = false;
-
- return keycode;
-}
-
-static u32 imon_panel_key_lookup(u64 code)
-{
- int i;
- u32 keycode = KEY_RESERVED;
-
- for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
- if (imon_panel_key_table[i].hw_code == (code | 0xffee)) {
- keycode = imon_panel_key_table[i].keycode;
- break;
- }
- }
-
- return keycode;
-}
-
-static bool imon_mouse_event(struct imon_context *ictx,
- unsigned char *buf, int len)
-{
- char rel_x = 0x00, rel_y = 0x00;
- u8 right_shift = 1;
- bool mouse_input = true;
- int dir = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&ictx->kc_lock, flags);
-
- /* newer iMON device PAD or mouse button */
- if (ictx->product != 0xffdc && (buf[0] & 0x01) && len == 5) {
- rel_x = buf[2];
- rel_y = buf[3];
- right_shift = 1;
- /* 0xffdc iMON PAD or mouse button input */
- } else if (ictx->product == 0xffdc && (buf[0] & 0x40) &&
- !((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) {
- rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
- (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
- if (buf[0] & 0x02)
- rel_x |= ~0x0f;
- rel_x = rel_x + rel_x / 2;
- rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
- (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
- if (buf[0] & 0x01)
- rel_y |= ~0x0f;
- rel_y = rel_y + rel_y / 2;
- right_shift = 2;
- /* some ffdc devices decode mouse buttons differently... */
- } else if (ictx->product == 0xffdc && (buf[0] == 0x68)) {
- right_shift = 2;
- /* ch+/- buttons, which we use for an emulated scroll wheel */
- } else if (ictx->kc == KEY_CHANNELUP && (buf[2] & 0x40) != 0x40) {
- dir = 1;
- } else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
- dir = -1;
- } else
- mouse_input = false;
-
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
- if (mouse_input) {
- dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
-
- if (dir) {
- input_report_rel(ictx->idev, REL_WHEEL, dir);
- } else if (rel_x || rel_y) {
- input_report_rel(ictx->idev, REL_X, rel_x);
- input_report_rel(ictx->idev, REL_Y, rel_y);
- } else {
- input_report_key(ictx->idev, BTN_LEFT, buf[1] & 0x1);
- input_report_key(ictx->idev, BTN_RIGHT,
- buf[1] >> right_shift & 0x1);
- }
- input_sync(ictx->idev);
- spin_lock_irqsave(&ictx->kc_lock, flags);
- ictx->last_keycode = ictx->kc;
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
- }
-
- return mouse_input;
-}
-
-static void imon_touch_event(struct imon_context *ictx, unsigned char *buf)
-{
- mod_timer(&ictx->ttimer, jiffies + TOUCH_TIMEOUT);
- ictx->touch_x = (buf[0] << 4) | (buf[1] >> 4);
- ictx->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf));
- input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
- input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
- input_report_key(ictx->touch, BTN_TOUCH, 0x01);
- input_sync(ictx->touch);
-}
-
-static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
-{
- int dir = 0;
- char rel_x = 0x00, rel_y = 0x00;
- u16 timeout, threshold;
- u32 scancode = KEY_RESERVED;
- unsigned long flags;
-
- /*
- * The imon directional pad functions more like a touchpad. Bytes 3 & 4
- * contain a position coordinate (x,y), with each component ranging
- * from -14 to 14. We want to down-sample this to only 4 discrete values
- * for up/down/left/right arrow keys. Also, when you get too close to
- * diagonals, it has a tendancy to jump back and forth, so lets try to
- * ignore when they get too close.
- */
- if (ictx->product != 0xffdc) {
- /* first, pad to 8 bytes so it conforms with everything else */
- buf[5] = buf[6] = buf[7] = 0;
- timeout = 500; /* in msecs */
- /* (2*threshold) x (2*threshold) square */
- threshold = pad_thresh ? pad_thresh : 28;
- rel_x = buf[2];
- rel_y = buf[3];
-
- if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
- if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
- dir = stabilize((int)rel_x, (int)rel_y,
- timeout, threshold);
- if (!dir) {
- spin_lock_irqsave(&ictx->kc_lock,
- flags);
- ictx->kc = KEY_UNKNOWN;
- spin_unlock_irqrestore(&ictx->kc_lock,
- flags);
- return;
- }
- buf[2] = dir & 0xFF;
- buf[3] = (dir >> 8) & 0xFF;
- scancode = be32_to_cpu(*((u32 *)buf));
- }
- } else {
- /*
- * Hack alert: instead of using keycodes, we have
- * to use hard-coded scancodes here...
- */
- if (abs(rel_y) > abs(rel_x)) {
- buf[2] = (rel_y > 0) ? 0x7F : 0x80;
- buf[3] = 0;
- if (rel_y > 0)
- scancode = 0x01007f00; /* KEY_DOWN */
- else
- scancode = 0x01008000; /* KEY_UP */
- } else {
- buf[2] = 0;
- buf[3] = (rel_x > 0) ? 0x7F : 0x80;
- if (rel_x > 0)
- scancode = 0x0100007f; /* KEY_RIGHT */
- else
- scancode = 0x01000080; /* KEY_LEFT */
- }
- }
-
- /*
- * Handle on-board decoded pad events for e.g. older VFD/iMON-Pad
- * device (15c2:ffdc). The remote generates various codes from
- * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates
- * 0x688301b7 and the right one 0x688481b7. All other keys generate
- * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with
- * reversed endianess. Extract direction from buffer, rotate endianess,
- * adjust sign and feed the values into stabilize(). The resulting codes
- * will be 0x01008000, 0x01007F00, which match the newer devices.
- */
- } else {
- timeout = 10; /* in msecs */
- /* (2*threshold) x (2*threshold) square */
- threshold = pad_thresh ? pad_thresh : 15;
-
- /* buf[1] is x */
- rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
- (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
- if (buf[0] & 0x02)
- rel_x |= ~0x10+1;
- /* buf[2] is y */
- rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
- (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
- if (buf[0] & 0x01)
- rel_y |= ~0x10+1;
-
- buf[0] = 0x01;
- buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
-
- if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
- dir = stabilize((int)rel_x, (int)rel_y,
- timeout, threshold);
- if (!dir) {
- spin_lock_irqsave(&ictx->kc_lock, flags);
- ictx->kc = KEY_UNKNOWN;
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
- return;
- }
- buf[2] = dir & 0xFF;
- buf[3] = (dir >> 8) & 0xFF;
- scancode = be32_to_cpu(*((u32 *)buf));
- } else {
- /*
- * Hack alert: instead of using keycodes, we have
- * to use hard-coded scancodes here...
- */
- if (abs(rel_y) > abs(rel_x)) {
- buf[2] = (rel_y > 0) ? 0x7F : 0x80;
- buf[3] = 0;
- if (rel_y > 0)
- scancode = 0x01007f00; /* KEY_DOWN */
- else
- scancode = 0x01008000; /* KEY_UP */
- } else {
- buf[2] = 0;
- buf[3] = (rel_x > 0) ? 0x7F : 0x80;
- if (rel_x > 0)
- scancode = 0x0100007f; /* KEY_RIGHT */
- else
- scancode = 0x01000080; /* KEY_LEFT */
- }
- }
- }
-
- if (scancode) {
- spin_lock_irqsave(&ictx->kc_lock, flags);
- ictx->kc = imon_remote_key_lookup(ictx, scancode);
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
- }
-}
-
-/**
- * figure out if these is a press or a release. We don't actually
- * care about repeats, as those will be auto-generated within the IR
- * subsystem for repeating scancodes.
- */
-static int imon_parse_press_type(struct imon_context *ictx,
- unsigned char *buf, u8 ktype)
-{
- int press_type = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&ictx->kc_lock, flags);
-
- /* key release of 0x02XXXXXX key */
- if (ictx->kc == KEY_RESERVED && buf[0] == 0x02 && buf[3] == 0x00)
- ictx->kc = ictx->last_keycode;
-
- /* mouse button release on (some) 0xffdc devices */
- else if (ictx->kc == KEY_RESERVED && buf[0] == 0x68 && buf[1] == 0x82 &&
- buf[2] == 0x81 && buf[3] == 0xb7)
- ictx->kc = ictx->last_keycode;
-
- /* mouse button release on (some other) 0xffdc devices */
- else if (ictx->kc == KEY_RESERVED && buf[0] == 0x01 && buf[1] == 0x00 &&
- buf[2] == 0x81 && buf[3] == 0xb7)
- ictx->kc = ictx->last_keycode;
-
- /* mce-specific button handling, no keyup events */
- else if (ktype == IMON_KEY_MCE) {
- ictx->rc_toggle = buf[2];
- press_type = 1;
-
- /* incoherent or irrelevant data */
- } else if (ictx->kc == KEY_RESERVED)
- press_type = -EINVAL;
-
- /* key release of 0xXXXXXXb7 key */
- else if (ictx->release_code)
- press_type = 0;
-
- /* this is a button press */
- else
- press_type = 1;
-
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
- return press_type;
-}
-
-/**
- * Process the incoming packet
- */
-static void imon_incoming_packet(struct imon_context *ictx,
- struct urb *urb, int intf)
-{
- int len = urb->actual_length;
- unsigned char *buf = urb->transfer_buffer;
- struct device *dev = ictx->dev;
- unsigned long flags;
- u32 kc;
- bool norelease = false;
- int i;
- u64 scancode;
- int press_type = 0;
- int msec;
- struct timeval t;
- static struct timeval prev_time = { 0, 0 };
- u8 ktype;
-
- /* filter out junk data on the older 0xffdc imon devices */
- if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
- return;
-
- /* Figure out what key was pressed */
- if (len == 8 && buf[7] == 0xee) {
- scancode = be64_to_cpu(*((u64 *)buf));
- ktype = IMON_KEY_PANEL;
- kc = imon_panel_key_lookup(scancode);
- } else {
- scancode = be32_to_cpu(*((u32 *)buf));
- if (ictx->ir_type == IR_TYPE_RC6) {
- ktype = IMON_KEY_IMON;
- if (buf[0] == 0x80)
- ktype = IMON_KEY_MCE;
- kc = imon_mce_key_lookup(ictx, scancode);
- } else {
- ktype = IMON_KEY_IMON;
- kc = imon_remote_key_lookup(ictx, scancode);
- }
- }
-
- spin_lock_irqsave(&ictx->kc_lock, flags);
- /* keyboard/mouse mode toggle button */
- if (kc == KEY_KEYBOARD && !ictx->release_code) {
- ictx->last_keycode = kc;
- if (!nomouse) {
- ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
- dev_dbg(dev, "toggling to %s mode\n",
- ictx->pad_mouse ? "mouse" : "keyboard");
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
- return;
- } else {
- ictx->pad_mouse = 0;
- dev_dbg(dev, "mouse mode disabled, passing key value\n");
- }
- }
-
- ictx->kc = kc;
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
- /* send touchscreen events through input subsystem if touchpad data */
- if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 &&
- buf[7] == 0x86) {
- imon_touch_event(ictx, buf);
- return;
-
- /* look for mouse events with pad in mouse mode */
- } else if (ictx->pad_mouse) {
- if (imon_mouse_event(ictx, buf, len))
- return;
- }
-
- /* Now for some special handling to convert pad input to arrow keys */
- if (((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) ||
- ((len == 8) && (buf[0] & 0x40) &&
- !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
- len = 8;
- imon_pad_to_keys(ictx, buf);
- norelease = true;
- }
-
- if (debug) {
- printk(KERN_INFO "intf%d decoded packet: ", intf);
- for (i = 0; i < len; ++i)
- printk("%02x ", buf[i]);
- printk("\n");
- }
-
- press_type = imon_parse_press_type(ictx, buf, ktype);
- if (press_type < 0)
- goto not_input_data;
-
- spin_lock_irqsave(&ictx->kc_lock, flags);
- if (ictx->kc == KEY_UNKNOWN)
- goto unknown_key;
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
- if (ktype != IMON_KEY_PANEL) {
- if (press_type == 0)
- ir_keyup(ictx->rdev);
- else {
- ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
- spin_lock_irqsave(&ictx->kc_lock, flags);
- ictx->last_keycode = ictx->kc;
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
- }
- return;
- }
-
- /* Only panel type events left to process now */
- spin_lock_irqsave(&ictx->kc_lock, flags);
-
- /* KEY_MUTE repeats from knob need to be suppressed */
- if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
- do_gettimeofday(&t);
- msec = tv2int(&t, &prev_time);
- prev_time = t;
- if (msec < ictx->idev->rep[REP_DELAY]) {
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
- return;
- }
- }
- kc = ictx->kc;
-
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
-
- input_report_key(ictx->idev, kc, press_type);
- input_sync(ictx->idev);
-
- /* panel keys don't generate a release */
- input_report_key(ictx->idev, kc, 0);
- input_sync(ictx->idev);
-
- ictx->last_keycode = kc;
-
- return;
-
-unknown_key:
- spin_unlock_irqrestore(&ictx->kc_lock, flags);
- dev_info(dev, "%s: unknown keypress, code 0x%llx\n", __func__,
- (long long)scancode);
- return;
-
-not_input_data:
- if (len != 8) {
- dev_warn(dev, "imon %s: invalid incoming packet "
- "size (len = %d, intf%d)\n", __func__, len, intf);
- return;
- }
-
- /* iMON 2.4G associate frame */
- if (buf[0] == 0x00 &&
- buf[2] == 0xFF && /* REFID */
- buf[3] == 0xFF &&
- buf[4] == 0xFF &&
- buf[5] == 0xFF && /* iMON 2.4G */
- ((buf[6] == 0x4E && buf[7] == 0xDF) || /* LT */
- (buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */
- dev_warn(dev, "%s: remote associated refid=%02X\n",
- __func__, buf[1]);
- ictx->rf_isassociating = false;
- }
-}
-
-/**
- * Callback function for USB core API: receive data
- */
-static void usb_rx_callback_intf0(struct urb *urb)
-{
- struct imon_context *ictx;
- int intfnum = 0;
-
- if (!urb)
- return;
-
- ictx = (struct imon_context *)urb->context;
- if (!ictx)
- return;
-
- switch (urb->status) {
- case -ENOENT: /* usbcore unlink successful! */
- return;
-
- case -ESHUTDOWN: /* transport endpoint was shut down */
- break;
-
- case 0:
- imon_incoming_packet(ictx, urb, intfnum);
- break;
-
- default:
- dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
- __func__, urb->status);
- break;
- }
-
- usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
-}
-
-static void usb_rx_callback_intf1(struct urb *urb)
-{
- struct imon_context *ictx;
- int intfnum = 1;
-
- if (!urb)
- return;
-
- ictx = (struct imon_context *)urb->context;
- if (!ictx)
- return;
-
- switch (urb->status) {
- case -ENOENT: /* usbcore unlink successful! */
- return;
-
- case -ESHUTDOWN: /* transport endpoint was shut down */
- break;
-
- case 0:
- imon_incoming_packet(ictx, urb, intfnum);
- break;
-
- default:
- dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
- __func__, urb->status);
- break;
- }
-
- usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
-}
-
-/*
- * The 0x15c2:0xffdc device ID was used for umpteen different imon
- * devices, and all of them constantly spew interrupts, even when there
- * is no actual data to report. However, byte 6 of this buffer looks like
- * its unique across device variants, so we're trying to key off that to
- * figure out which display type (if any) and what IR protocol the device
- * actually supports. These devices have their IR protocol hard-coded into
- * their firmware, they can't be changed on the fly like the newer hardware.
- */
-static void imon_get_ffdc_type(struct imon_context *ictx)
-{
- u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
- u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
- u64 allowed_protos = IR_TYPE_OTHER;
-
- switch (ffdc_cfg_byte) {
- /* iMON Knob, no display, iMON IR + vol knob */
- case 0x21:
- dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR");
- ictx->display_supported = false;
- break;
- /* iMON 2.4G LT (usb stick), no display, iMON RF */
- case 0x4e:
- dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF");
- ictx->display_supported = false;
- ictx->rf_device = true;
- break;
- /* iMON VFD, no IR (does have vol knob tho) */
- case 0x35:
- dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR");
- detected_display_type = IMON_DISPLAY_TYPE_VFD;
- break;
- /* iMON VFD, iMON IR */
- case 0x24:
- case 0x85:
- dev_info(ictx->dev, "0xffdc iMON VFD, iMON IR");
- detected_display_type = IMON_DISPLAY_TYPE_VFD;
- break;
- /* iMON VFD, MCE IR */
- case 0x9e:
- dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
- detected_display_type = IMON_DISPLAY_TYPE_VFD;
- allowed_protos = IR_TYPE_RC6;
- break;
- /* iMON LCD, MCE IR */
- case 0x9f:
- dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
- detected_display_type = IMON_DISPLAY_TYPE_LCD;
- allowed_protos = IR_TYPE_RC6;
- break;
- default:
- dev_info(ictx->dev, "Unknown 0xffdc device, "
- "defaulting to VFD and iMON IR");
- detected_display_type = IMON_DISPLAY_TYPE_VFD;
- break;
- }
-
- printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
-
- ictx->display_type = detected_display_type;
- ictx->props->allowed_protos = allowed_protos;
- ictx->ir_type = allowed_protos;
-}
-
-static void imon_set_display_type(struct imon_context *ictx)
-{
- u8 configured_display_type = IMON_DISPLAY_TYPE_VFD;
-
- /*
- * Try to auto-detect the type of display if the user hasn't set
- * it by hand via the display_type modparam. Default is VFD.
- */
-
- if (display_type == IMON_DISPLAY_TYPE_AUTO) {
- switch (ictx->product) {
- case 0xffdc:
- /* set in imon_get_ffdc_type() */
- configured_display_type = ictx->display_type;
- break;
- case 0x0034:
- case 0x0035:
- configured_display_type = IMON_DISPLAY_TYPE_VGA;
- break;
- case 0x0038:
- case 0x0039:
- case 0x0045:
- configured_display_type = IMON_DISPLAY_TYPE_LCD;
- break;
- case 0x003c:
- case 0x0041:
- case 0x0042:
- case 0x0043:
- configured_display_type = IMON_DISPLAY_TYPE_NONE;
- ictx->display_supported = false;
- break;
- case 0x0036:
- case 0x0044:
- default:
- configured_display_type = IMON_DISPLAY_TYPE_VFD;
- break;
- }
- } else {
- configured_display_type = display_type;
- if (display_type == IMON_DISPLAY_TYPE_NONE)
- ictx->display_supported = false;
- else
- ictx->display_supported = true;
- dev_info(ictx->dev, "%s: overriding display type to %d via "
- "modparam\n", __func__, display_type);
- }
-
- ictx->display_type = configured_display_type;
-}
-
-static struct input_dev *imon_init_rdev(struct imon_context *ictx)
-{
- struct input_dev *rdev;
- struct ir_dev_props *props;
- int ret;
- char *ir_codes = NULL;
- const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x88 };
-
- rdev = input_allocate_device();
- props = kzalloc(sizeof(*props), GFP_KERNEL);
- if (!rdev || !props) {
- dev_err(ictx->dev, "remote control dev allocation failed\n");
- goto out;
- }
-
- snprintf(ictx->name_rdev, sizeof(ictx->name_rdev),
- "iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
- usb_make_path(ictx->usbdev_intf0, ictx->phys_rdev,
- sizeof(ictx->phys_rdev));
- strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
-
- rdev->name = ictx->name_rdev;
- rdev->phys = ictx->phys_rdev;
- usb_to_input_id(ictx->usbdev_intf0, &rdev->id);
- rdev->dev.parent = ictx->dev;
- rdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
- input_set_drvdata(rdev, ictx);
-
- props->priv = ictx;
- props->driver_type = RC_DRIVER_SCANCODE;
- props->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
- props->change_protocol = imon_ir_change_protocol;
- ictx->props = props;
-
- /* Enable front-panel buttons and/or knobs */
- memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
- ret = send_packet(ictx);
- /* Not fatal, but warn about it */
- if (ret)
- dev_info(ictx->dev, "panel buttons/knobs setup failed\n");
-
- if (ictx->product == 0xffdc)
- imon_get_ffdc_type(ictx);
-
- imon_set_display_type(ictx);
-
- if (ictx->ir_type == IR_TYPE_RC6)
- ir_codes = RC_MAP_IMON_MCE;
- else
- ir_codes = RC_MAP_IMON_PAD;
-
- ret = ir_input_register(rdev, ir_codes, props, MOD_NAME);
- if (ret < 0) {
- dev_err(ictx->dev, "remote input dev register failed\n");
- goto out;
- }
-
- return rdev;
-
-out:
- kfree(props);
- input_free_device(rdev);
- return NULL;
-}
-
-static struct input_dev *imon_init_idev(struct imon_context *ictx)
-{
- struct input_dev *idev;
- int ret, i;
-
- idev = input_allocate_device();
- if (!idev) {
- dev_err(ictx->dev, "input dev allocation failed\n");
- goto out;
- }
-
- snprintf(ictx->name_idev, sizeof(ictx->name_idev),
- "iMON Panel, Knob and Mouse(%04x:%04x)",
- ictx->vendor, ictx->product);
- idev->name = ictx->name_idev;
-
- usb_make_path(ictx->usbdev_intf0, ictx->phys_idev,
- sizeof(ictx->phys_idev));
- strlcat(ictx->phys_idev, "/input1", sizeof(ictx->phys_idev));
- idev->phys = ictx->phys_idev;
-
- idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
-
- idev->keybit[BIT_WORD(BTN_MOUSE)] =
- BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
- idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
- BIT_MASK(REL_WHEEL);
-
- /* panel and/or knob code support */
- for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
- u32 kc = imon_panel_key_table[i].keycode;
- __set_bit(kc, idev->keybit);
- }
-
- usb_to_input_id(ictx->usbdev_intf0, &idev->id);
- idev->dev.parent = ictx->dev;
- input_set_drvdata(idev, ictx);
-
- ret = input_register_device(idev);
- if (ret < 0) {
- dev_err(ictx->dev, "input dev register failed\n");
- goto out;
- }
-
- return idev;
-
-out:
- input_free_device(idev);
- return NULL;
-}
-
-static struct input_dev *imon_init_touch(struct imon_context *ictx)
-{
- struct input_dev *touch;
- int ret;
-
- touch = input_allocate_device();
- if (!touch) {
- dev_err(ictx->dev, "touchscreen input dev allocation failed\n");
- goto touch_alloc_failed;
- }
-
- snprintf(ictx->name_touch, sizeof(ictx->name_touch),
- "iMON USB Touchscreen (%04x:%04x)",
- ictx->vendor, ictx->product);
- touch->name = ictx->name_touch;
-
- usb_make_path(ictx->usbdev_intf1, ictx->phys_touch,
- sizeof(ictx->phys_touch));
- strlcat(ictx->phys_touch, "/input2", sizeof(ictx->phys_touch));
- touch->phys = ictx->phys_touch;
-
- touch->evbit[0] =
- BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- touch->keybit[BIT_WORD(BTN_TOUCH)] =
- BIT_MASK(BTN_TOUCH);
- input_set_abs_params(touch, ABS_X,
- 0x00, 0xfff, 0, 0);
- input_set_abs_params(touch, ABS_Y,
- 0x00, 0xfff, 0, 0);
-
- input_set_drvdata(touch, ictx);
-
- usb_to_input_id(ictx->usbdev_intf1, &touch->id);
- touch->dev.parent = ictx->dev;
- ret = input_register_device(touch);
- if (ret < 0) {
- dev_info(ictx->dev, "touchscreen input dev register failed\n");
- goto touch_register_failed;
- }
-
- return touch;
-
-touch_register_failed:
- input_free_device(ictx->touch);
-
-touch_alloc_failed:
- return NULL;
-}
-
-static bool imon_find_endpoints(struct imon_context *ictx,
- struct usb_host_interface *iface_desc)
-{
- struct usb_endpoint_descriptor *ep;
- struct usb_endpoint_descriptor *rx_endpoint = NULL;
- struct usb_endpoint_descriptor *tx_endpoint = NULL;
- int ifnum = iface_desc->desc.bInterfaceNumber;
- int num_endpts = iface_desc->desc.bNumEndpoints;
- int i, ep_dir, ep_type;
- bool ir_ep_found = false;
- bool display_ep_found = false;
- bool tx_control = false;
-
- /*
- * Scan the endpoint list and set:
- * first input endpoint = IR endpoint
- * first output endpoint = display endpoint
- */
- for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
- ep = &iface_desc->endpoint[i].desc;
- ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
- ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
-
- if (!ir_ep_found && ep_dir == USB_DIR_IN &&
- ep_type == USB_ENDPOINT_XFER_INT) {
-
- rx_endpoint = ep;
- ir_ep_found = true;
- dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
-
- } else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
- ep_type == USB_ENDPOINT_XFER_INT) {
- tx_endpoint = ep;
- display_ep_found = true;
- dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
- }
- }
-
- if (ifnum == 0) {
- ictx->rx_endpoint_intf0 = rx_endpoint;
- /*
- * tx is used to send characters to lcd/vfd, associate RF
- * remotes, set IR protocol, and maybe more...
- */
- ictx->tx_endpoint = tx_endpoint;
- } else {
- ictx->rx_endpoint_intf1 = rx_endpoint;
- }
-
- /*
- * If we didn't find a display endpoint, this is probably one of the
- * newer iMON devices that use control urb instead of interrupt
- */
- if (!display_ep_found) {
- tx_control = true;
- display_ep_found = true;
- dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
- "interface OUT endpoint\n", __func__);
- }
-
- /*
- * Some iMON receivers have no display. Unfortunately, it seems
- * that SoundGraph recycles device IDs between devices both with
- * and without... :\
- */
- if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
- display_ep_found = false;
- dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
- }
-
- /*
- * iMON Touch devices have a VGA touchscreen, but no "display", as
- * that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
- */
- if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
- display_ep_found = false;
- dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
- }
-
- /* Input endpoint is mandatory */
- if (!ir_ep_found)
- pr_err("no valid input (IR) endpoint found\n");
-
- ictx->tx_control = tx_control;
-
- if (display_ep_found)
- ictx->display_supported = true;
-
- return ir_ep_found;
-
-}
-
-static struct imon_context *imon_init_intf0(struct usb_interface *intf)
-{
- struct imon_context *ictx;
- struct urb *rx_urb;
- struct urb *tx_urb;
- struct device *dev = &intf->dev;
- struct usb_host_interface *iface_desc;
- int ret = -ENOMEM;
-
- ictx = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
- if (!ictx) {
- dev_err(dev, "%s: kzalloc failed for context", __func__);
- goto exit;
- }
- rx_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!rx_urb) {
- dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__);
- goto rx_urb_alloc_failed;
- }
- tx_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!tx_urb) {
- dev_err(dev, "%s: usb_alloc_urb failed for display urb",
- __func__);
- goto tx_urb_alloc_failed;
- }
-
- mutex_init(&ictx->lock);
- spin_lock_init(&ictx->kc_lock);
-
- mutex_lock(&ictx->lock);
-
- ictx->dev = dev;
- ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
- ictx->dev_present_intf0 = true;
- ictx->rx_urb_intf0 = rx_urb;
- ictx->tx_urb = tx_urb;
- ictx->rf_device = false;
-
- ictx->vendor = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
- ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
-
- ret = -ENODEV;
- iface_desc = intf->cur_altsetting;
- if (!imon_find_endpoints(ictx, iface_desc)) {
- goto find_endpoint_failed;
- }
-
- ictx->idev = imon_init_idev(ictx);
- if (!ictx->idev) {
- dev_err(dev, "%s: input device setup failed\n", __func__);
- goto idev_setup_failed;
- }
-
- ictx->rdev = imon_init_rdev(ictx);
- if (!ictx->rdev) {
- dev_err(dev, "%s: rc device setup failed\n", __func__);
- goto rdev_setup_failed;
- }
-
- usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
- usb_rcvintpipe(ictx->usbdev_intf0,
- ictx->rx_endpoint_intf0->bEndpointAddress),
- ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
- usb_rx_callback_intf0, ictx,
- ictx->rx_endpoint_intf0->bInterval);
-
- ret = usb_submit_urb(ictx->rx_urb_intf0, GFP_KERNEL);
- if (ret) {
- pr_err("usb_submit_urb failed for intf0 (%d)\n", ret);
- goto urb_submit_failed;
- }
-
- return ictx;
-
-urb_submit_failed:
- ir_input_unregister(ictx->rdev);
-rdev_setup_failed:
- input_unregister_device(ictx->idev);
-idev_setup_failed:
-find_endpoint_failed:
- mutex_unlock(&ictx->lock);
- usb_free_urb(tx_urb);
-tx_urb_alloc_failed:
- usb_free_urb(rx_urb);
-rx_urb_alloc_failed:
- kfree(ictx);
-exit:
- dev_err(dev, "unable to initialize intf0, err %d\n", ret);
-
- return NULL;
-}
-
-static struct imon_context *imon_init_intf1(struct usb_interface *intf,
- struct imon_context *ictx)
-{
- struct urb *rx_urb;
- struct usb_host_interface *iface_desc;
- int ret = -ENOMEM;
-
- rx_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!rx_urb) {
- pr_err("usb_alloc_urb failed for IR urb\n");
- goto rx_urb_alloc_failed;
- }
-
- mutex_lock(&ictx->lock);
-
- if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
- init_timer(&ictx->ttimer);
- ictx->ttimer.data = (unsigned long)ictx;
- ictx->ttimer.function = imon_touch_display_timeout;
- }
-
- ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
- ictx->dev_present_intf1 = true;
- ictx->rx_urb_intf1 = rx_urb;
-
- ret = -ENODEV;
- iface_desc = intf->cur_altsetting;
- if (!imon_find_endpoints(ictx, iface_desc))
- goto find_endpoint_failed;
-
- if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
- ictx->touch = imon_init_touch(ictx);
- if (!ictx->touch)
- goto touch_setup_failed;
- } else
- ictx->touch = NULL;
-
- usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
- usb_rcvintpipe(ictx->usbdev_intf1,
- ictx->rx_endpoint_intf1->bEndpointAddress),
- ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
- usb_rx_callback_intf1, ictx,
- ictx->rx_endpoint_intf1->bInterval);
-
- ret = usb_submit_urb(ictx->rx_urb_intf1, GFP_KERNEL);
-
- if (ret) {
- pr_err("usb_submit_urb failed for intf1 (%d)\n", ret);
- goto urb_submit_failed;
- }
-
- return ictx;
-
-urb_submit_failed:
- if (ictx->touch)
- input_unregister_device(ictx->touch);
-touch_setup_failed:
-find_endpoint_failed:
- mutex_unlock(&ictx->lock);
- usb_free_urb(rx_urb);
-rx_urb_alloc_failed:
- dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
-
- return NULL;
-}
-
-static void imon_init_display(struct imon_context *ictx,
- struct usb_interface *intf)
-{
- int ret;
-
- dev_dbg(ictx->dev, "Registering iMON display with sysfs\n");
-
- /* set up sysfs entry for built-in clock */
- ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group);
- if (ret)
- dev_err(ictx->dev, "Could not create display sysfs "
- "entries(%d)", ret);
-
- if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
- ret = usb_register_dev(intf, &imon_lcd_class);
- else
- ret = usb_register_dev(intf, &imon_vfd_class);
- if (ret)
- /* Not a fatal error, so ignore */
- dev_info(ictx->dev, "could not get a minor number for "
- "display\n");
-
-}
-
-/**
- * Callback function for USB core API: Probe
- */
-static int __devinit imon_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- struct usb_device *usbdev = NULL;
- struct usb_host_interface *iface_desc = NULL;
- struct usb_interface *first_if;
- struct device *dev = &interface->dev;
- int ifnum, code_length, sysfs_err;
- int ret = 0;
- struct imon_context *ictx = NULL;
- struct imon_context *first_if_ctx = NULL;
- u16 vendor, product;
-
- code_length = BUF_CHUNK_SIZE * 8;
-
- usbdev = usb_get_dev(interface_to_usbdev(interface));
- iface_desc = interface->cur_altsetting;
- ifnum = iface_desc->desc.bInterfaceNumber;
- vendor = le16_to_cpu(usbdev->descriptor.idVendor);
- product = le16_to_cpu(usbdev->descriptor.idProduct);
-
- dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
- __func__, vendor, product, ifnum);
-
- /* prevent races probing devices w/multiple interfaces */
- mutex_lock(&driver_lock);
-
- first_if = usb_ifnum_to_if(usbdev, 0);
- first_if_ctx = (struct imon_context *)usb_get_intfdata(first_if);
-
- if (ifnum == 0) {
- ictx = imon_init_intf0(interface);
- if (!ictx) {
- pr_err("failed to initialize context!\n");
- ret = -ENODEV;
- goto fail;
- }
-
- } else {
- /* this is the secondary interface on the device */
- ictx = imon_init_intf1(interface, first_if_ctx);
- if (!ictx) {
- pr_err("failed to attach to context!\n");
- ret = -ENODEV;
- goto fail;
- }
-
- }
-
- usb_set_intfdata(interface, ictx);
-
- if (ifnum == 0) {
- if (product == 0xffdc && ictx->rf_device) {
- sysfs_err = sysfs_create_group(&interface->dev.kobj,
- &imon_rf_attr_group);
- if (sysfs_err)
- pr_err("Could not create RF sysfs entries(%d)\n",
- sysfs_err);
- }
-
- if (ictx->display_supported)
- imon_init_display(ictx, interface);
- }
-
- dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
- "usb<%d:%d> initialized\n", vendor, product, ifnum,
- usbdev->bus->busnum, usbdev->devnum);
-
- mutex_unlock(&ictx->lock);
- mutex_unlock(&driver_lock);
-
- return 0;
-
-fail:
- mutex_unlock(&driver_lock);
- dev_err(dev, "unable to register, err %d\n", ret);
-
- return ret;
-}
-
-/**
- * Callback function for USB core API: disconnect
- */
-static void __devexit imon_disconnect(struct usb_interface *interface)
-{
- struct imon_context *ictx;
- struct device *dev;
- int ifnum;
-
- /* prevent races with multi-interface device probing and display_open */
- mutex_lock(&driver_lock);
-
- ictx = usb_get_intfdata(interface);
- dev = ictx->dev;
- ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
-
- mutex_lock(&ictx->lock);
-
- /*
- * sysfs_remove_group is safe to call even if sysfs_create_group
- * hasn't been called
- */
- sysfs_remove_group(&interface->dev.kobj, &imon_display_attr_group);
- sysfs_remove_group(&interface->dev.kobj, &imon_rf_attr_group);
-
- usb_set_intfdata(interface, NULL);
-
- /* Abort ongoing write */
- if (ictx->tx.busy) {
- usb_kill_urb(ictx->tx_urb);
- complete_all(&ictx->tx.finished);
- }
-
- if (ifnum == 0) {
- ictx->dev_present_intf0 = false;
- usb_kill_urb(ictx->rx_urb_intf0);
- input_unregister_device(ictx->idev);
- ir_input_unregister(ictx->rdev);
- if (ictx->display_supported) {
- if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
- usb_deregister_dev(interface, &imon_lcd_class);
- else
- usb_deregister_dev(interface, &imon_vfd_class);
- }
- } else {
- ictx->dev_present_intf1 = false;
- usb_kill_urb(ictx->rx_urb_intf1);
- if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
- input_unregister_device(ictx->touch);
- }
-
- if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1) {
- if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
- del_timer_sync(&ictx->ttimer);
- mutex_unlock(&ictx->lock);
- if (!ictx->display_isopen)
- free_imon_context(ictx);
- } else
- mutex_unlock(&ictx->lock);
-
- mutex_unlock(&driver_lock);
-
- dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n",
- __func__, ifnum);
-}
-
-static int imon_suspend(struct usb_interface *intf, pm_message_t message)
-{
- struct imon_context *ictx = usb_get_intfdata(intf);
- int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
- if (ifnum == 0)
- usb_kill_urb(ictx->rx_urb_intf0);
- else
- usb_kill_urb(ictx->rx_urb_intf1);
-
- return 0;
-}
-
-static int imon_resume(struct usb_interface *intf)
-{
- int rc = 0;
- struct imon_context *ictx = usb_get_intfdata(intf);
- int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
- if (ifnum == 0) {
- usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
- usb_rcvintpipe(ictx->usbdev_intf0,
- ictx->rx_endpoint_intf0->bEndpointAddress),
- ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
- usb_rx_callback_intf0, ictx,
- ictx->rx_endpoint_intf0->bInterval);
-
- rc = usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
-
- } else {
- usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
- usb_rcvintpipe(ictx->usbdev_intf1,
- ictx->rx_endpoint_intf1->bEndpointAddress),
- ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
- usb_rx_callback_intf1, ictx,
- ictx->rx_endpoint_intf1->bInterval);
-
- rc = usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
- }
-
- return rc;
-}
-
-static int __init imon_init(void)
-{
- int rc;
-
- rc = usb_register(&imon_driver);
- if (rc) {
- pr_err("usb register failed(%d)\n", rc);
- rc = -ENODEV;
- }
-
- return rc;
-}
-
-static void __exit imon_exit(void)
-{
- usb_deregister(&imon_driver);
-}
-
-module_init(imon_init);
-module_exit(imon_exit);
+++ /dev/null
-/*
- * Remote Controller core raw events header
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _IR_RAW_EVENT
-#define _IR_RAW_EVENT
-
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <media/ir-core.h>
-
-struct ir_raw_handler {
- struct list_head list;
-
- u64 protocols; /* which are handled by this handler */
- int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
-
- /* These two should only be used by the lirc decoder */
- int (*raw_register)(struct input_dev *input_dev);
- int (*raw_unregister)(struct input_dev *input_dev);
-};
-
-struct ir_raw_event_ctrl {
- struct list_head list; /* to keep track of raw clients */
- struct task_struct *thread;
- spinlock_t lock;
- struct kfifo kfifo; /* fifo for the pulse/space durations */
- ktime_t last_event; /* when last event occurred */
- enum raw_event_type last_type; /* last event type */
- struct input_dev *input_dev; /* pointer to the parent input_dev */
- u64 enabled_protocols; /* enabled raw protocol decoders */
-
- /* raw decoder state follows */
- struct ir_raw_event prev_ev;
- struct ir_raw_event this_ev;
- struct nec_dec {
- int state;
- unsigned count;
- u32 bits;
- bool is_nec_x;
- bool necx_repeat;
- } nec;
- struct rc5_dec {
- int state;
- u32 bits;
- unsigned count;
- unsigned wanted_bits;
- } rc5;
- struct rc6_dec {
- int state;
- u8 header;
- u32 body;
- bool toggle;
- unsigned count;
- unsigned wanted_bits;
- } rc6;
- struct sony_dec {
- int state;
- u32 bits;
- unsigned count;
- } sony;
- struct jvc_dec {
- int state;
- u16 bits;
- u16 old_bits;
- unsigned count;
- bool first;
- bool toggle;
- } jvc;
- struct rc5_sz_dec {
- int state;
- u32 bits;
- unsigned count;
- unsigned wanted_bits;
- } rc5_sz;
- struct lirc_codec {
- struct ir_input_dev *ir_dev;
- struct lirc_driver *drv;
- int carrier_low;
-
- ktime_t gap_start;
- u64 gap_duration;
- bool gap;
- bool send_timeout_reports;
-
- } lirc;
-};
-
-/* macros for IR decoders */
-static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin)
-{
- return d1 > (d2 - margin);
-}
-
-static inline bool eq_margin(unsigned d1, unsigned d2, unsigned margin)
-{
- return ((d1 > (d2 - margin)) && (d1 < (d2 + margin)));
-}
-
-static inline bool is_transition(struct ir_raw_event *x, struct ir_raw_event *y)
-{
- return x->pulse != y->pulse;
-}
-
-static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
-{
- if (duration > ev->duration)
- ev->duration = 0;
- else
- ev->duration -= duration;
-}
-
-/* Returns true if event is normal pulse/space event */
-static inline bool is_timing_event(struct ir_raw_event ev)
-{
- return !ev.carrier_report && !ev.reset;
-}
-
-#define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000)
-#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space")
-/*
- * Routines from ir-sysfs.c - Meant to be called only internally inside
- * ir-core
- */
-int ir_register_input(struct input_dev *input_dev);
-
-int ir_register_class(struct input_dev *input_dev);
-void ir_unregister_class(struct input_dev *input_dev);
-
-/*
- * Routines from ir-raw-event.c to be used internally and by decoders
- */
-u64 ir_raw_get_allowed_protocols(void);
-int ir_raw_event_register(struct input_dev *input_dev);
-void ir_raw_event_unregister(struct input_dev *input_dev);
-int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
-void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
-void ir_raw_init(void);
-
-int ir_rcmap_init(void);
-void ir_rcmap_cleanup(void);
-/*
- * Decoder initialization code
- *
- * Those load logic are called during ir-core init, and automatically
- * loads the compiled decoders for their usage with IR raw events
- */
-
-/* from ir-nec-decoder.c */
-#ifdef CONFIG_IR_NEC_DECODER_MODULE
-#define load_nec_decode() request_module("ir-nec-decoder")
-#else
-#define load_nec_decode() 0
-#endif
-
-/* from ir-rc5-decoder.c */
-#ifdef CONFIG_IR_RC5_DECODER_MODULE
-#define load_rc5_decode() request_module("ir-rc5-decoder")
-#else
-#define load_rc5_decode() 0
-#endif
-
-/* from ir-rc6-decoder.c */
-#ifdef CONFIG_IR_RC6_DECODER_MODULE
-#define load_rc6_decode() request_module("ir-rc6-decoder")
-#else
-#define load_rc6_decode() 0
-#endif
-
-/* from ir-jvc-decoder.c */
-#ifdef CONFIG_IR_JVC_DECODER_MODULE
-#define load_jvc_decode() request_module("ir-jvc-decoder")
-#else
-#define load_jvc_decode() 0
-#endif
-
-/* from ir-sony-decoder.c */
-#ifdef CONFIG_IR_SONY_DECODER_MODULE
-#define load_sony_decode() request_module("ir-sony-decoder")
-#else
-#define load_sony_decode() 0
-#endif
-
-/* from ir-lirc-codec.c */
-#ifdef CONFIG_IR_LIRC_CODEC_MODULE
-#define load_lirc_codec() request_module("ir-lirc-codec")
-#else
-#define load_lirc_codec() 0
-#endif
-
-
-#endif /* _IR_RAW_EVENT */
+++ /dev/null
-/*
- * some common functions to handle infrared remote protocol decoding for
- * drivers which have not yet been (or can't be) converted to use the
- * regular protocol decoders...
- *
- * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/jiffies.h>
-#include <media/ir-common.h>
-#include "ir-core-priv.h"
-
-/* -------------------------------------------------------------------------- */
-
-MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
-MODULE_LICENSE("GPL");
-
-/* RC5 decoding stuff, moved from bttv-input.c to share it with
- * saa7134 */
-
-/* decode raw bit pattern to RC5 code */
-static u32 ir_rc5_decode(unsigned int code)
-{
- unsigned int org_code = code;
- unsigned int pair;
- unsigned int rc5 = 0;
- int i;
-
- for (i = 0; i < 14; ++i) {
- pair = code & 0x3;
- code >>= 2;
-
- rc5 <<= 1;
- switch (pair) {
- case 0:
- case 2:
- break;
- case 1:
- rc5 |= 1;
- break;
- case 3:
- IR_dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
- return 0;
- }
- }
- IR_dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
- "instr=%x\n", rc5, org_code, RC5_START(rc5),
- RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
- return rc5;
-}
-
-void ir_rc5_timer_end(unsigned long data)
-{
- struct card_ir *ir = (struct card_ir *)data;
- struct timeval tv;
- unsigned long current_jiffies;
- u32 gap;
- u32 rc5 = 0;
-
- /* get time */
- current_jiffies = jiffies;
- do_gettimeofday(&tv);
-
- /* avoid overflow with gap >1s */
- if (tv.tv_sec - ir->base_time.tv_sec > 1) {
- gap = 200000;
- } else {
- gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
- tv.tv_usec - ir->base_time.tv_usec;
- }
-
- /* signal we're ready to start a new code */
- ir->active = 0;
-
- /* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
- if (gap < 28000) {
- IR_dprintk(1, "ir-common: spurious timer_end\n");
- return;
- }
-
- if (ir->last_bit < 20) {
- /* ignore spurious codes (caused by light/other remotes) */
- IR_dprintk(1, "ir-common: short code: %x\n", ir->code);
- } else {
- ir->code = (ir->code << ir->shift_by) | 1;
- rc5 = ir_rc5_decode(ir->code);
-
- /* two start bits? */
- if (RC5_START(rc5) != ir->start) {
- IR_dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
-
- /* right address? */
- } else if (RC5_ADDR(rc5) == ir->addr) {
- u32 toggle = RC5_TOGGLE(rc5);
- u32 instr = RC5_INSTR(rc5);
-
- /* Good code */
- ir_keydown(ir->dev, instr, toggle);
- IR_dprintk(1, "ir-common: instruction %x, toggle %x\n",
- instr, toggle);
- }
- }
-}
-EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
+++ /dev/null
-/* ir-jvc-decoder.c - handle JVC IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/bitrev.h>
-#include "ir-core-priv.h"
-
-#define JVC_NBITS 16 /* dev(8) + func(8) */
-#define JVC_UNIT 525000 /* ns */
-#define JVC_HEADER_PULSE (16 * JVC_UNIT) /* lack of header -> repeat */
-#define JVC_HEADER_SPACE (8 * JVC_UNIT)
-#define JVC_BIT_PULSE (1 * JVC_UNIT)
-#define JVC_BIT_0_SPACE (1 * JVC_UNIT)
-#define JVC_BIT_1_SPACE (3 * JVC_UNIT)
-#define JVC_TRAILER_PULSE (1 * JVC_UNIT)
-#define JVC_TRAILER_SPACE (35 * JVC_UNIT)
-
-enum jvc_state {
- STATE_INACTIVE,
- STATE_HEADER_SPACE,
- STATE_BIT_PULSE,
- STATE_BIT_SPACE,
- STATE_TRAILER_PULSE,
- STATE_TRAILER_SPACE,
- STATE_CHECK_REPEAT,
-};
-
-/**
- * ir_jvc_decode() - Decode one JVC pulse or space
- * @input_dev: the struct input_dev descriptor of the device
- * @duration: the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct jvc_dec *data = &ir_dev->raw->jvc;
-
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_JVC))
- return 0;
-
- if (!is_timing_event(ev)) {
- if (ev.reset)
- data->state = STATE_INACTIVE;
- return 0;
- }
-
- if (!geq_margin(ev.duration, JVC_UNIT, JVC_UNIT / 2))
- goto out;
-
- IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
-again:
- switch (data->state) {
-
- case STATE_INACTIVE:
- if (!ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
- break;
-
- data->count = 0;
- data->first = true;
- data->toggle = !data->toggle;
- data->state = STATE_HEADER_SPACE;
- return 0;
-
- case STATE_HEADER_SPACE:
- if (ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, JVC_HEADER_SPACE, JVC_UNIT / 2))
- break;
-
- data->state = STATE_BIT_PULSE;
- return 0;
-
- case STATE_BIT_PULSE:
- if (!ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, JVC_BIT_PULSE, JVC_UNIT / 2))
- break;
-
- data->state = STATE_BIT_SPACE;
- return 0;
-
- case STATE_BIT_SPACE:
- if (ev.pulse)
- break;
-
- data->bits <<= 1;
- if (eq_margin(ev.duration, JVC_BIT_1_SPACE, JVC_UNIT / 2)) {
- data->bits |= 1;
- decrease_duration(&ev, JVC_BIT_1_SPACE);
- } else if (eq_margin(ev.duration, JVC_BIT_0_SPACE, JVC_UNIT / 2))
- decrease_duration(&ev, JVC_BIT_0_SPACE);
- else
- break;
- data->count++;
-
- if (data->count == JVC_NBITS)
- data->state = STATE_TRAILER_PULSE;
- else
- data->state = STATE_BIT_PULSE;
- return 0;
-
- case STATE_TRAILER_PULSE:
- if (!ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, JVC_TRAILER_PULSE, JVC_UNIT / 2))
- break;
-
- data->state = STATE_TRAILER_SPACE;
- return 0;
-
- case STATE_TRAILER_SPACE:
- if (ev.pulse)
- break;
-
- if (!geq_margin(ev.duration, JVC_TRAILER_SPACE, JVC_UNIT / 2))
- break;
-
- if (data->first) {
- u32 scancode;
- scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
- (bitrev8((data->bits >> 0) & 0xff) << 0);
- IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
- ir_keydown(input_dev, scancode, data->toggle);
- data->first = false;
- data->old_bits = data->bits;
- } else if (data->bits == data->old_bits) {
- IR_dprintk(1, "JVC repeat\n");
- ir_repeat(input_dev);
- } else {
- IR_dprintk(1, "JVC invalid repeat msg\n");
- break;
- }
-
- data->count = 0;
- data->state = STATE_CHECK_REPEAT;
- return 0;
-
- case STATE_CHECK_REPEAT:
- if (!ev.pulse)
- break;
-
- if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
- data->state = STATE_INACTIVE;
- else
- data->state = STATE_BIT_PULSE;
- goto again;
- }
-
-out:
- IR_dprintk(1, "JVC decode failed at state %d (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
- data->state = STATE_INACTIVE;
- return -EINVAL;
-}
-
-static struct ir_raw_handler jvc_handler = {
- .protocols = IR_TYPE_JVC,
- .decode = ir_jvc_decode,
-};
-
-static int __init ir_jvc_decode_init(void)
-{
- ir_raw_handler_register(&jvc_handler);
-
- printk(KERN_INFO "IR JVC protocol handler initialized\n");
- return 0;
-}
-
-static void __exit ir_jvc_decode_exit(void)
-{
- ir_raw_handler_unregister(&jvc_handler);
-}
-
-module_init(ir_jvc_decode_init);
-module_exit(ir_jvc_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("JVC IR protocol decoder");
+++ /dev/null
-/* ir-keytable.c - handle IR scancode->keycode tables
- *
- * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-
-#include <linux/input.h>
-#include <linux/slab.h>
-#include "ir-core-priv.h"
-
-/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
-#define IR_TAB_MIN_SIZE 256
-#define IR_TAB_MAX_SIZE 8192
-
-/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
-#define IR_KEYPRESS_TIMEOUT 250
-
-/**
- * ir_create_table() - initializes a scancode table
- * @rc_tab: the ir_scancode_table to initialize
- * @name: name to assign to the table
- * @ir_type: ir type to assign to the new table
- * @size: initial size of the table
- * @return: zero on success or a negative error code
- *
- * This routine will initialize the ir_scancode_table and will allocate
- * memory to hold at least the specified number elements.
- */
-static int ir_create_table(struct ir_scancode_table *rc_tab,
- const char *name, u64 ir_type, size_t size)
-{
- rc_tab->name = name;
- rc_tab->ir_type = ir_type;
- rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
- rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
- rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
- if (!rc_tab->scan)
- return -ENOMEM;
-
- IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
- rc_tab->size, rc_tab->alloc);
- return 0;
-}
-
-/**
- * ir_free_table() - frees memory allocated by a scancode table
- * @rc_tab: the table whose mappings need to be freed
- *
- * This routine will free memory alloctaed for key mappings used by given
- * scancode table.
- */
-static void ir_free_table(struct ir_scancode_table *rc_tab)
-{
- rc_tab->size = 0;
- kfree(rc_tab->scan);
- rc_tab->scan = NULL;
-}
-
-/**
- * ir_resize_table() - resizes a scancode table if necessary
- * @rc_tab: the ir_scancode_table to resize
- * @gfp_flags: gfp flags to use when allocating memory
- * @return: zero on success or a negative error code
- *
- * This routine will shrink the ir_scancode_table if it has lots of
- * unused entries and grow it if it is full.
- */
-static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
-{
- unsigned int oldalloc = rc_tab->alloc;
- unsigned int newalloc = oldalloc;
- struct ir_scancode *oldscan = rc_tab->scan;
- struct ir_scancode *newscan;
-
- if (rc_tab->size == rc_tab->len) {
- /* All entries in use -> grow keytable */
- if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
- return -ENOMEM;
-
- newalloc *= 2;
- IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
- }
-
- if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
- /* Less than 1/3 of entries in use -> shrink keytable */
- newalloc /= 2;
- IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
- }
-
- if (newalloc == oldalloc)
- return 0;
-
- newscan = kmalloc(newalloc, gfp_flags);
- if (!newscan) {
- IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
- return -ENOMEM;
- }
-
- memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
- rc_tab->scan = newscan;
- rc_tab->alloc = newalloc;
- rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
- kfree(oldscan);
- return 0;
-}
-
-/**
- * ir_update_mapping() - set a keycode in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
- * @rc_tab: scancode table to be adjusted
- * @index: index of the mapping that needs to be updated
- * @keycode: the desired keycode
- * @return: previous keycode assigned to the mapping
- *
- * This routine is used to update scancode->keycopde mapping at given
- * position.
- */
-static unsigned int ir_update_mapping(struct input_dev *dev,
- struct ir_scancode_table *rc_tab,
- unsigned int index,
- unsigned int new_keycode)
-{
- int old_keycode = rc_tab->scan[index].keycode;
- int i;
-
- /* Did the user wish to remove the mapping? */
- if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
- IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
- index, rc_tab->scan[index].scancode);
- rc_tab->len--;
- memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
- (rc_tab->len - index) * sizeof(struct ir_scancode));
- } else {
- IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
- index,
- old_keycode == KEY_RESERVED ? "New" : "Replacing",
- rc_tab->scan[index].scancode, new_keycode);
- rc_tab->scan[index].keycode = new_keycode;
- __set_bit(new_keycode, dev->keybit);
- }
-
- if (old_keycode != KEY_RESERVED) {
- /* A previous mapping was updated... */
- __clear_bit(old_keycode, dev->keybit);
- /* ... but another scancode might use the same keycode */
- for (i = 0; i < rc_tab->len; i++) {
- if (rc_tab->scan[i].keycode == old_keycode) {
- __set_bit(old_keycode, dev->keybit);
- break;
- }
- }
-
- /* Possibly shrink the keytable, failure is not a problem */
- ir_resize_table(rc_tab, GFP_ATOMIC);
- }
-
- return old_keycode;
-}
-
-/**
- * ir_locate_scancode() - set a keycode in the scancode->keycode table
- * @ir_dev: the struct ir_input_dev device descriptor
- * @rc_tab: scancode table to be searched
- * @scancode: the desired scancode
- * @resize: controls whether we allowed to resize the table to
- * accomodate not yet present scancodes
- * @return: index of the mapping containing scancode in question
- * or -1U in case of failure.
- *
- * This routine is used to locate given scancode in ir_scancode_table.
- * If scancode is not yet present the routine will allocate a new slot
- * for it.
- */
-static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
- struct ir_scancode_table *rc_tab,
- unsigned int scancode,
- bool resize)
-{
- unsigned int i;
-
- /*
- * Unfortunately, some hardware-based IR decoders don't provide
- * all bits for the complete IR code. In general, they provide only
- * the command part of the IR code. Yet, as it is possible to replace
- * the provided IR with another one, it is needed to allow loading
- * IR tables from other remotes. So,
- */
- if (ir_dev->props && ir_dev->props->scanmask)
- scancode &= ir_dev->props->scanmask;
-
- /* First check if we already have a mapping for this ir command */
- for (i = 0; i < rc_tab->len; i++) {
- if (rc_tab->scan[i].scancode == scancode)
- return i;
-
- /* Keytable is sorted from lowest to highest scancode */
- if (rc_tab->scan[i].scancode >= scancode)
- break;
- }
-
- /* No previous mapping found, we might need to grow the table */
- if (rc_tab->size == rc_tab->len) {
- if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
- return -1U;
- }
-
- /* i is the proper index to insert our new keycode */
- if (i < rc_tab->len)
- memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
- (rc_tab->len - i) * sizeof(struct ir_scancode));
- rc_tab->scan[i].scancode = scancode;
- rc_tab->scan[i].keycode = KEY_RESERVED;
- rc_tab->len++;
-
- return i;
-}
-
-/**
- * ir_setkeycode() - set a keycode in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
- * @scancode: the desired scancode
- * @keycode: result
- * @return: -EINVAL if the keycode could not be inserted, otherwise zero.
- *
- * This routine is used to handle evdev EVIOCSKEY ioctl.
- */
-static int ir_setkeycode(struct input_dev *dev,
- const struct input_keymap_entry *ke,
- unsigned int *old_keycode)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- unsigned int index;
- unsigned int scancode;
- int retval;
- unsigned long flags;
-
- spin_lock_irqsave(&rc_tab->lock, flags);
-
- if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
- index = ke->index;
- if (index >= rc_tab->len) {
- retval = -EINVAL;
- goto out;
- }
- } else {
- retval = input_scancode_to_scalar(ke, &scancode);
- if (retval)
- goto out;
-
- index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
- if (index >= rc_tab->len) {
- retval = -ENOMEM;
- goto out;
- }
- }
-
- *old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
-
-out:
- spin_unlock_irqrestore(&rc_tab->lock, flags);
- return retval;
-}
-
-/**
- * ir_setkeytable() - sets several entries in the scancode->keycode table
- * @dev: the struct input_dev device descriptor
- * @to: the struct ir_scancode_table to copy entries to
- * @from: the struct ir_scancode_table to copy entries from
- * @return: -ENOMEM if all keycodes could not be inserted, otherwise zero.
- *
- * This routine is used to handle table initialization.
- */
-static int ir_setkeytable(struct ir_input_dev *ir_dev,
- const struct ir_scancode_table *from)
-{
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- unsigned int i, index;
- int rc;
-
- rc = ir_create_table(&ir_dev->rc_tab,
- from->name, from->ir_type, from->size);
- if (rc)
- return rc;
-
- IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
- rc_tab->size, rc_tab->alloc);
-
- for (i = 0; i < from->size; i++) {
- index = ir_establish_scancode(ir_dev, rc_tab,
- from->scan[i].scancode, false);
- if (index >= rc_tab->len) {
- rc = -ENOMEM;
- break;
- }
-
- ir_update_mapping(ir_dev->input_dev, rc_tab, index,
- from->scan[i].keycode);
- }
-
- if (rc)
- ir_free_table(rc_tab);
-
- return rc;
-}
-
-/**
- * ir_lookup_by_scancode() - locate mapping by scancode
- * @rc_tab: the &struct ir_scancode_table to search
- * @scancode: scancode to look for in the table
- * @return: index in the table, -1U if not found
- *
- * This routine performs binary search in RC keykeymap table for
- * given scancode.
- */
-static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
- unsigned int scancode)
-{
- int start = 0;
- int end = rc_tab->len - 1;
- int mid;
-
- while (start <= end) {
- mid = (start + end) / 2;
- if (rc_tab->scan[mid].scancode < scancode)
- start = mid + 1;
- else if (rc_tab->scan[mid].scancode > scancode)
- end = mid - 1;
- else
- return mid;
- }
-
- return -1U;
-}
-
-/**
- * ir_getkeycode() - get a keycode from the scancode->keycode table
- * @dev: the struct input_dev device descriptor
- * @scancode: the desired scancode
- * @keycode: used to return the keycode, if found, or KEY_RESERVED
- * @return: always returns zero.
- *
- * This routine is used to handle evdev EVIOCGKEY ioctl.
- */
-static int ir_getkeycode(struct input_dev *dev,
- struct input_keymap_entry *ke)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- struct ir_scancode *entry;
- unsigned long flags;
- unsigned int index;
- unsigned int scancode;
- int retval;
-
- spin_lock_irqsave(&rc_tab->lock, flags);
-
- if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
- index = ke->index;
- } else {
- retval = input_scancode_to_scalar(ke, &scancode);
- if (retval)
- goto out;
-
- index = ir_lookup_by_scancode(rc_tab, scancode);
- }
-
- if (index >= rc_tab->len) {
- if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
- IR_dprintk(1, "unknown key for scancode 0x%04x\n",
- scancode);
- retval = -EINVAL;
- goto out;
- }
-
- entry = &rc_tab->scan[index];
-
- ke->index = index;
- ke->keycode = entry->keycode;
- ke->len = sizeof(entry->scancode);
- memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
-
- retval = 0;
-
-out:
- spin_unlock_irqrestore(&rc_tab->lock, flags);
- return retval;
-}
-
-/**
- * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
- * @input_dev: the struct input_dev descriptor of the device
- * @scancode: the scancode that we're seeking
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. The scancode is received and needs to be converted into a keycode.
- * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
- * corresponding keycode from the table.
- */
-u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(dev);
- struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
- unsigned int keycode;
- unsigned int index;
- unsigned long flags;
-
- spin_lock_irqsave(&rc_tab->lock, flags);
-
- index = ir_lookup_by_scancode(rc_tab, scancode);
- keycode = index < rc_tab->len ?
- rc_tab->scan[index].keycode : KEY_RESERVED;
-
- spin_unlock_irqrestore(&rc_tab->lock, flags);
-
- if (keycode != KEY_RESERVED)
- IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
- dev->name, scancode, keycode);
-
- return keycode;
-}
-EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
-
-/**
- * ir_do_keyup() - internal function to signal the release of a keypress
- * @ir: the struct ir_input_dev descriptor of the device
- *
- * This function is used internally to release a keypress, it must be
- * called with keylock held.
- */
-static void ir_do_keyup(struct ir_input_dev *ir)
-{
- if (!ir->keypressed)
- return;
-
- IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
- input_report_key(ir->input_dev, ir->last_keycode, 0);
- input_sync(ir->input_dev);
- ir->keypressed = false;
-}
-
-/**
- * ir_keyup() - generates input event to signal the release of a keypress
- * @dev: the struct input_dev descriptor of the device
- *
- * This routine is used to signal that a key has been released on the
- * remote control.
- */
-void ir_keyup(struct input_dev *dev)
-{
- unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
-
- spin_lock_irqsave(&ir->keylock, flags);
- ir_do_keyup(ir);
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keyup);
-
-/**
- * ir_timer_keyup() - generates a keyup event after a timeout
- * @cookie: a pointer to struct ir_input_dev passed to setup_timer()
- *
- * This routine will generate a keyup event some time after a keydown event
- * is generated when no further activity has been detected.
- */
-static void ir_timer_keyup(unsigned long cookie)
-{
- struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
- unsigned long flags;
-
- /*
- * ir->keyup_jiffies is used to prevent a race condition if a
- * hardware interrupt occurs at this point and the keyup timer
- * event is moved further into the future as a result.
- *
- * The timer will then be reactivated and this function called
- * again in the future. We need to exit gracefully in that case
- * to allow the input subsystem to do its auto-repeat magic or
- * a keyup event might follow immediately after the keydown.
- */
- spin_lock_irqsave(&ir->keylock, flags);
- if (time_is_before_eq_jiffies(ir->keyup_jiffies))
- ir_do_keyup(ir);
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-
-/**
- * ir_repeat() - notifies the IR core that a key is still pressed
- * @dev: the struct input_dev descriptor of the device
- *
- * This routine is used by IR decoders when a repeat message which does
- * not include the necessary bits to reproduce the scancode has been
- * received.
- */
-void ir_repeat(struct input_dev *dev)
-{
- unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
-
- spin_lock_irqsave(&ir->keylock, flags);
-
- input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
-
- if (!ir->keypressed)
- goto out;
-
- ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
- mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-
-out:
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_repeat);
-
-/**
- * ir_do_keydown() - internal function to process a keypress
- * @dev: the struct input_dev descriptor of the device
- * @scancode: the scancode of the keypress
- * @keycode: the keycode of the keypress
- * @toggle: the toggle value of the keypress
- *
- * This function is used internally to register a keypress, it must be
- * called with keylock held.
- */
-static void ir_do_keydown(struct input_dev *dev, int scancode,
- u32 keycode, u8 toggle)
-{
- struct ir_input_dev *ir = input_get_drvdata(dev);
-
- input_event(dev, EV_MSC, MSC_SCAN, scancode);
-
- /* Repeat event? */
- if (ir->keypressed &&
- ir->last_scancode == scancode &&
- ir->last_toggle == toggle)
- return;
-
- /* Release old keypress */
- ir_do_keyup(ir);
-
- ir->last_scancode = scancode;
- ir->last_toggle = toggle;
- ir->last_keycode = keycode;
-
- if (keycode == KEY_RESERVED)
- return;
-
- /* Register a keypress */
- ir->keypressed = true;
- IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
- dev->name, keycode, scancode);
- input_report_key(dev, ir->last_keycode, 1);
- input_sync(dev);
-}
-
-/**
- * ir_keydown() - generates input event for a key press
- * @dev: the struct input_dev descriptor of the device
- * @scancode: the scancode that we're seeking
- * @toggle: the toggle value (protocol dependent, if the protocol doesn't
- * support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
- */
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
-{
- unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
- u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
- spin_lock_irqsave(&ir->keylock, flags);
- ir_do_keydown(dev, scancode, keycode, toggle);
-
- if (ir->keypressed) {
- ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
- mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
- }
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown);
-
-/**
- * ir_keydown_notimeout() - generates input event for a key press without
- * an automatic keyup event at a later time
- * @dev: the struct input_dev descriptor of the device
- * @scancode: the scancode that we're seeking
- * @toggle: the toggle value (protocol dependent, if the protocol doesn't
- * support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key(). The driver must manually call ir_keyup() at a later
- * stage.
- */
-void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
-{
- unsigned long flags;
- struct ir_input_dev *ir = input_get_drvdata(dev);
- u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
- spin_lock_irqsave(&ir->keylock, flags);
- ir_do_keydown(dev, scancode, keycode, toggle);
- spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
-
-static int ir_open(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- return ir_dev->props->open(ir_dev->props->priv);
-}
-
-static void ir_close(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- ir_dev->props->close(ir_dev->props->priv);
-}
-
-/**
- * __ir_input_register() - sets the IR keycode table and add the handlers
- * for keymap table get/set
- * @input_dev: the struct input_dev descriptor of the device
- * @rc_tab: the struct ir_scancode_table table of scancode/keymap
- *
- * This routine is used to initialize the input infrastructure
- * to work with an IR.
- * It will register the input/evdev interface for the device and
- * register the syfs code for IR class
- */
-int __ir_input_register(struct input_dev *input_dev,
- const struct ir_scancode_table *rc_tab,
- struct ir_dev_props *props,
- const char *driver_name)
-{
- struct ir_input_dev *ir_dev;
- int rc;
-
- if (rc_tab->scan == NULL || !rc_tab->size)
- return -EINVAL;
-
- ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
- if (!ir_dev)
- return -ENOMEM;
-
- ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
- if (!ir_dev->driver_name) {
- rc = -ENOMEM;
- goto out_dev;
- }
-
- input_dev->getkeycode_new = ir_getkeycode;
- input_dev->setkeycode_new = ir_setkeycode;
- input_set_drvdata(input_dev, ir_dev);
- ir_dev->input_dev = input_dev;
-
- spin_lock_init(&ir_dev->rc_tab.lock);
- spin_lock_init(&ir_dev->keylock);
- setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
-
- if (props) {
- ir_dev->props = props;
- if (props->open)
- input_dev->open = ir_open;
- if (props->close)
- input_dev->close = ir_close;
- }
-
- set_bit(EV_KEY, input_dev->evbit);
- set_bit(EV_REP, input_dev->evbit);
- set_bit(EV_MSC, input_dev->evbit);
- set_bit(MSC_SCAN, input_dev->mscbit);
-
- rc = ir_setkeytable(ir_dev, rc_tab);
- if (rc)
- goto out_name;
-
- rc = ir_register_class(input_dev);
- if (rc < 0)
- goto out_table;
-
- if (ir_dev->props)
- if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
- rc = ir_raw_event_register(input_dev);
- if (rc < 0)
- goto out_event;
- }
-
- rc = ir_register_input(input_dev);
- if (rc < 0)
- goto out_event;
-
- IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
- driver_name, rc_tab->name,
- (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
- " in raw mode" : "");
-
- /*
- * Default delay of 250ms is too short for some protocols, expecially
- * since the timeout is currently set to 250ms. Increase it to 500ms,
- * to avoid wrong repetition of the keycodes.
- */
- input_dev->rep[REP_DELAY] = 500;
-
- return 0;
-
-out_event:
- ir_unregister_class(input_dev);
-out_table:
- ir_free_table(&ir_dev->rc_tab);
-out_name:
- kfree(ir_dev->driver_name);
-out_dev:
- kfree(ir_dev);
- return rc;
-}
-EXPORT_SYMBOL_GPL(__ir_input_register);
-
-/**
- * ir_input_unregister() - unregisters IR and frees resources
- * @input_dev: the struct input_dev descriptor of the device
-
- * This routine is used to free memory and de-register interfaces.
- */
-void ir_input_unregister(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- if (!ir_dev)
- return;
-
- IR_dprintk(1, "Freed keycode table\n");
-
- del_timer_sync(&ir_dev->timer_keyup);
- if (ir_dev->props)
- if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
- ir_raw_event_unregister(input_dev);
-
- ir_free_table(&ir_dev->rc_tab);
-
- ir_unregister_class(input_dev);
-
- kfree(ir_dev->driver_name);
- kfree(ir_dev);
-}
-EXPORT_SYMBOL_GPL(ir_input_unregister);
-
-int ir_core_debug; /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
-
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* ir-lirc-codec.c - ir-core to classic lirc interface bridge
- *
- * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-#include <media/ir-core.h>
-#include "ir-core-priv.h"
-
-#define LIRCBUF_SIZE 256
-
-/**
- * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
- * lircd userspace daemon for decoding.
- * @input_dev: the struct input_dev descriptor of the device
- * @duration: the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the lirc interfaces aren't wired up.
- */
-static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct lirc_codec *lirc = &ir_dev->raw->lirc;
- int sample;
-
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
- return 0;
-
- if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
- return -EINVAL;
-
- /* Packet start */
- if (ev.reset)
- return 0;
-
- /* Carrier reports */
- if (ev.carrier_report) {
- sample = LIRC_FREQUENCY(ev.carrier);
-
- /* Packet end */
- } else if (ev.timeout) {
-
- if (lirc->gap)
- return 0;
-
- lirc->gap_start = ktime_get();
- lirc->gap = true;
- lirc->gap_duration = ev.duration;
-
- if (!lirc->send_timeout_reports)
- return 0;
-
- sample = LIRC_TIMEOUT(ev.duration / 1000);
-
- /* Normal sample */
- } else {
-
- if (lirc->gap) {
- int gap_sample;
-
- lirc->gap_duration += ktime_to_ns(ktime_sub(ktime_get(),
- lirc->gap_start));
-
- /* Convert to ms and cap by LIRC_VALUE_MASK */
- do_div(lirc->gap_duration, 1000);
- lirc->gap_duration = min(lirc->gap_duration,
- (u64)LIRC_VALUE_MASK);
-
- gap_sample = LIRC_SPACE(lirc->gap_duration);
- lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
- (unsigned char *) &gap_sample);
- lirc->gap = false;
- }
-
- sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) :
- LIRC_SPACE(ev.duration / 1000);
- }
-
- lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
- (unsigned char *) &sample);
- wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
-
- return 0;
-}
-
-static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
- size_t n, loff_t *ppos)
-{
- struct lirc_codec *lirc;
- struct ir_input_dev *ir_dev;
- int *txbuf; /* buffer with values to transmit */
- int ret = 0, count;
-
- lirc = lirc_get_pdata(file);
- if (!lirc)
- return -EFAULT;
-
- if (n % sizeof(int))
- return -EINVAL;
-
- count = n / sizeof(int);
- if (count > LIRCBUF_SIZE || count % 2 == 0)
- return -EINVAL;
-
- txbuf = memdup_user(buf, n);
- if (IS_ERR(txbuf))
- return PTR_ERR(txbuf);
-
- ir_dev = lirc->ir_dev;
- if (!ir_dev) {
- ret = -EFAULT;
- goto out;
- }
-
- if (ir_dev->props && ir_dev->props->tx_ir)
- ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
-
-out:
- kfree(txbuf);
- return ret;
-}
-
-static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
- unsigned long __user arg)
-{
- struct lirc_codec *lirc;
- struct ir_input_dev *ir_dev;
- int ret = 0;
- void *drv_data;
- __u32 val = 0, tmp;
-
- lirc = lirc_get_pdata(filep);
- if (!lirc)
- return -EFAULT;
-
- ir_dev = lirc->ir_dev;
- if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
- return -EFAULT;
-
- drv_data = ir_dev->props->priv;
-
- if (_IOC_DIR(cmd) & _IOC_WRITE) {
- ret = get_user(val, (__u32 *)arg);
- if (ret)
- return ret;
- }
-
- switch (cmd) {
-
- /* legacy support */
- case LIRC_GET_SEND_MODE:
- val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
- break;
-
- case LIRC_SET_SEND_MODE:
- if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
- return -EINVAL;
- return 0;
-
- /* TX settings */
- case LIRC_SET_TRANSMITTER_MASK:
- if (!ir_dev->props->s_tx_mask)
- return -EINVAL;
-
- return ir_dev->props->s_tx_mask(drv_data, val);
-
- case LIRC_SET_SEND_CARRIER:
- if (!ir_dev->props->s_tx_carrier)
- return -EINVAL;
-
- return ir_dev->props->s_tx_carrier(drv_data, val);
-
- case LIRC_SET_SEND_DUTY_CYCLE:
- if (!ir_dev->props->s_tx_duty_cycle)
- return -ENOSYS;
-
- if (val <= 0 || val >= 100)
- return -EINVAL;
-
- return ir_dev->props->s_tx_duty_cycle(drv_data, val);
-
- /* RX settings */
- case LIRC_SET_REC_CARRIER:
- if (!ir_dev->props->s_rx_carrier_range)
- return -ENOSYS;
-
- if (val <= 0)
- return -EINVAL;
-
- return ir_dev->props->s_rx_carrier_range(drv_data,
- ir_dev->raw->lirc.carrier_low, val);
-
- case LIRC_SET_REC_CARRIER_RANGE:
- if (val <= 0)
- return -EINVAL;
-
- ir_dev->raw->lirc.carrier_low = val;
- return 0;
-
- case LIRC_GET_REC_RESOLUTION:
- val = ir_dev->props->rx_resolution;
- break;
-
- case LIRC_SET_WIDEBAND_RECEIVER:
- if (!ir_dev->props->s_learning_mode)
- return -ENOSYS;
-
- return ir_dev->props->s_learning_mode(drv_data, !!val);
-
- case LIRC_SET_MEASURE_CARRIER_MODE:
- if (!ir_dev->props->s_carrier_report)
- return -ENOSYS;
-
- return ir_dev->props->s_carrier_report(drv_data, !!val);
-
- /* Generic timeout support */
- case LIRC_GET_MIN_TIMEOUT:
- if (!ir_dev->props->max_timeout)
- return -ENOSYS;
- val = ir_dev->props->min_timeout / 1000;
- break;
-
- case LIRC_GET_MAX_TIMEOUT:
- if (!ir_dev->props->max_timeout)
- return -ENOSYS;
- val = ir_dev->props->max_timeout / 1000;
- break;
-
- case LIRC_SET_REC_TIMEOUT:
- if (!ir_dev->props->max_timeout)
- return -ENOSYS;
-
- tmp = val * 1000;
-
- if (tmp < ir_dev->props->min_timeout ||
- tmp > ir_dev->props->max_timeout)
- return -EINVAL;
-
- ir_dev->props->timeout = tmp;
- break;
-
- case LIRC_SET_REC_TIMEOUT_REPORTS:
- lirc->send_timeout_reports = !!val;
- break;
-
- default:
- return lirc_dev_fop_ioctl(filep, cmd, arg);
- }
-
- if (_IOC_DIR(cmd) & _IOC_READ)
- ret = put_user(val, (__u32 *)arg);
-
- return ret;
-}
-
-static int ir_lirc_open(void *data)
-{
- return 0;
-}
-
-static void ir_lirc_close(void *data)
-{
- return;
-}
-
-static struct file_operations lirc_fops = {
- .owner = THIS_MODULE,
- .write = ir_lirc_transmit_ir,
- .unlocked_ioctl = ir_lirc_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = ir_lirc_ioctl,
-#endif
- .read = lirc_dev_fop_read,
- .poll = lirc_dev_fop_poll,
- .open = lirc_dev_fop_open,
- .release = lirc_dev_fop_close,
- .llseek = no_llseek,
-};
-
-static int ir_lirc_register(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct lirc_driver *drv;
- struct lirc_buffer *rbuf;
- int rc = -ENOMEM;
- unsigned long features;
-
- drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
- if (!drv)
- return rc;
-
- rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
- if (!rbuf)
- goto rbuf_alloc_failed;
-
- rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE);
- if (rc)
- goto rbuf_init_failed;
-
- features = LIRC_CAN_REC_MODE2;
- if (ir_dev->props->tx_ir) {
-
- features |= LIRC_CAN_SEND_PULSE;
- if (ir_dev->props->s_tx_mask)
- features |= LIRC_CAN_SET_TRANSMITTER_MASK;
- if (ir_dev->props->s_tx_carrier)
- features |= LIRC_CAN_SET_SEND_CARRIER;
-
- if (ir_dev->props->s_tx_duty_cycle)
- features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
- }
-
- if (ir_dev->props->s_rx_carrier_range)
- features |= LIRC_CAN_SET_REC_CARRIER |
- LIRC_CAN_SET_REC_CARRIER_RANGE;
-
- if (ir_dev->props->s_learning_mode)
- features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
-
- if (ir_dev->props->s_carrier_report)
- features |= LIRC_CAN_MEASURE_CARRIER;
-
-
- if (ir_dev->props->max_timeout)
- features |= LIRC_CAN_SET_REC_TIMEOUT;
-
-
- snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
- ir_dev->driver_name);
- drv->minor = -1;
- drv->features = features;
- drv->data = &ir_dev->raw->lirc;
- drv->rbuf = rbuf;
- drv->set_use_inc = &ir_lirc_open;
- drv->set_use_dec = &ir_lirc_close;
- drv->code_length = sizeof(struct ir_raw_event) * 8;
- drv->fops = &lirc_fops;
- drv->dev = &ir_dev->dev;
- drv->owner = THIS_MODULE;
-
- drv->minor = lirc_register_driver(drv);
- if (drv->minor < 0) {
- rc = -ENODEV;
- goto lirc_register_failed;
- }
-
- ir_dev->raw->lirc.drv = drv;
- ir_dev->raw->lirc.ir_dev = ir_dev;
- return 0;
-
-lirc_register_failed:
-rbuf_init_failed:
- kfree(rbuf);
-rbuf_alloc_failed:
- kfree(drv);
-
- return rc;
-}
-
-static int ir_lirc_unregister(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct lirc_codec *lirc = &ir_dev->raw->lirc;
-
- lirc_unregister_driver(lirc->drv->minor);
- lirc_buffer_free(lirc->drv->rbuf);
- kfree(lirc->drv);
-
- return 0;
-}
-
-static struct ir_raw_handler lirc_handler = {
- .protocols = IR_TYPE_LIRC,
- .decode = ir_lirc_decode,
- .raw_register = ir_lirc_register,
- .raw_unregister = ir_lirc_unregister,
-};
-
-static int __init ir_lirc_codec_init(void)
-{
- ir_raw_handler_register(&lirc_handler);
-
- printk(KERN_INFO "IR LIRC bridge handler initialized\n");
- return 0;
-}
-
-static void __exit ir_lirc_codec_exit(void)
-{
- ir_raw_handler_unregister(&lirc_handler);
-}
-
-module_init(ir_lirc_codec_init);
-module_exit(ir_lirc_codec_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("LIRC IR handler bridge");
+++ /dev/null
-/* ir-nec-decoder.c - handle NEC IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/bitrev.h>
-#include "ir-core-priv.h"
-
-#define NEC_NBITS 32
-#define NEC_UNIT 562500 /* ns */
-#define NEC_HEADER_PULSE (16 * NEC_UNIT)
-#define NECX_HEADER_PULSE (8 * NEC_UNIT) /* Less common NEC variant */
-#define NEC_HEADER_SPACE (8 * NEC_UNIT)
-#define NEC_REPEAT_SPACE (4 * NEC_UNIT)
-#define NEC_BIT_PULSE (1 * NEC_UNIT)
-#define NEC_BIT_0_SPACE (1 * NEC_UNIT)
-#define NEC_BIT_1_SPACE (3 * NEC_UNIT)
-#define NEC_TRAILER_PULSE (1 * NEC_UNIT)
-#define NEC_TRAILER_SPACE (10 * NEC_UNIT) /* even longer in reality */
-#define NECX_REPEAT_BITS 1
-
-enum nec_state {
- STATE_INACTIVE,
- STATE_HEADER_SPACE,
- STATE_BIT_PULSE,
- STATE_BIT_SPACE,
- STATE_TRAILER_PULSE,
- STATE_TRAILER_SPACE,
-};
-
-/**
- * ir_nec_decode() - Decode one NEC pulse or space
- * @input_dev: the struct input_dev descriptor of the device
- * @duration: the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct nec_dec *data = &ir_dev->raw->nec;
- u32 scancode;
- u8 address, not_address, command, not_command;
-
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_NEC))
- return 0;
-
- if (!is_timing_event(ev)) {
- if (ev.reset)
- data->state = STATE_INACTIVE;
- return 0;
- }
-
- IR_dprintk(2, "NEC decode started at state %d (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
- switch (data->state) {
-
- case STATE_INACTIVE:
- if (!ev.pulse)
- break;
-
- if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) {
- data->is_nec_x = false;
- data->necx_repeat = false;
- } else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
- data->is_nec_x = true;
- else
- break;
-
- data->count = 0;
- data->state = STATE_HEADER_SPACE;
- return 0;
-
- case STATE_HEADER_SPACE:
- if (ev.pulse)
- break;
-
- if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT / 2)) {
- data->state = STATE_BIT_PULSE;
- return 0;
- } else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
- ir_repeat(input_dev);
- IR_dprintk(1, "Repeat last key\n");
- data->state = STATE_TRAILER_PULSE;
- return 0;
- }
-
- break;
-
- case STATE_BIT_PULSE:
- if (!ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, NEC_BIT_PULSE, NEC_UNIT / 2))
- break;
-
- data->state = STATE_BIT_SPACE;
- return 0;
-
- case STATE_BIT_SPACE:
- if (ev.pulse)
- break;
-
- if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
- geq_margin(ev.duration,
- NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
- IR_dprintk(1, "Repeat last key\n");
- ir_repeat(input_dev);
- data->state = STATE_INACTIVE;
- return 0;
-
- } else if (data->count > NECX_REPEAT_BITS)
- data->necx_repeat = false;
-
- data->bits <<= 1;
- if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
- data->bits |= 1;
- else if (!eq_margin(ev.duration, NEC_BIT_0_SPACE, NEC_UNIT / 2))
- break;
- data->count++;
-
- if (data->count == NEC_NBITS)
- data->state = STATE_TRAILER_PULSE;
- else
- data->state = STATE_BIT_PULSE;
-
- return 0;
-
- case STATE_TRAILER_PULSE:
- if (!ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, NEC_TRAILER_PULSE, NEC_UNIT / 2))
- break;
-
- data->state = STATE_TRAILER_SPACE;
- return 0;
-
- case STATE_TRAILER_SPACE:
- if (ev.pulse)
- break;
-
- if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2))
- break;
-
- address = bitrev8((data->bits >> 24) & 0xff);
- not_address = bitrev8((data->bits >> 16) & 0xff);
- command = bitrev8((data->bits >> 8) & 0xff);
- not_command = bitrev8((data->bits >> 0) & 0xff);
-
- if ((command ^ not_command) != 0xff) {
- IR_dprintk(1, "NEC checksum error: received 0x%08x\n",
- data->bits);
- break;
- }
-
- if ((address ^ not_address) != 0xff) {
- /* Extended NEC */
- scancode = address << 16 |
- not_address << 8 |
- command;
- IR_dprintk(1, "NEC (Ext) scancode 0x%06x\n", scancode);
- } else {
- /* Normal NEC */
- scancode = address << 8 | command;
- IR_dprintk(1, "NEC scancode 0x%04x\n", scancode);
- }
-
- if (data->is_nec_x)
- data->necx_repeat = true;
-
- ir_keydown(input_dev, scancode, 0);
- data->state = STATE_INACTIVE;
- return 0;
- }
-
- IR_dprintk(1, "NEC decode failed at state %d (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
- data->state = STATE_INACTIVE;
- return -EINVAL;
-}
-
-static struct ir_raw_handler nec_handler = {
- .protocols = IR_TYPE_NEC,
- .decode = ir_nec_decode,
-};
-
-static int __init ir_nec_decode_init(void)
-{
- ir_raw_handler_register(&nec_handler);
-
- printk(KERN_INFO "IR NEC protocol handler initialized\n");
- return 0;
-}
-
-static void __exit ir_nec_decode_exit(void)
-{
- ir_raw_handler_unregister(&nec_handler);
-}
-
-module_init(ir_nec_decode_init);
-module_exit(ir_nec_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("NEC IR protocol decoder");
+++ /dev/null
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kthread.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/freezer.h>
-#include "ir-core-priv.h"
-
-/* Define the max number of pulse/space transitions to buffer */
-#define MAX_IR_EVENT_SIZE 512
-
-/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
-static LIST_HEAD(ir_raw_client_list);
-
-/* Used to handle IR raw handler extensions */
-static DEFINE_MUTEX(ir_raw_handler_lock);
-static LIST_HEAD(ir_raw_handler_list);
-static u64 available_protocols;
-
-#ifdef MODULE
-/* Used to load the decoders */
-static struct work_struct wq_load;
-#endif
-
-static int ir_raw_event_thread(void *data)
-{
- struct ir_raw_event ev;
- struct ir_raw_handler *handler;
- struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
- int retval;
-
- while (!kthread_should_stop()) {
-
- spin_lock_irq(&raw->lock);
- retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
-
- if (!retval) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (kthread_should_stop())
- set_current_state(TASK_RUNNING);
-
- spin_unlock_irq(&raw->lock);
- schedule();
- continue;
- }
-
- spin_unlock_irq(&raw->lock);
-
-
- BUG_ON(retval != sizeof(ev));
-
- mutex_lock(&ir_raw_handler_lock);
- list_for_each_entry(handler, &ir_raw_handler_list, list)
- handler->decode(raw->input_dev, ev);
- raw->prev_ev = ev;
- mutex_unlock(&ir_raw_handler_lock);
- }
-
- return 0;
-}
-
-/**
- * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
- * @input_dev: the struct input_dev device descriptor
- * @ev: the struct ir_raw_event descriptor of the pulse/space
- *
- * This routine (which may be called from an interrupt context) stores a
- * pulse/space duration for the raw ir decoding state machines. Pulses are
- * signalled as positive values and spaces as negative values. A zero value
- * will reset the decoding state machines.
- */
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
-
- if (!ir->raw)
- return -EINVAL;
-
- IR_dprintk(2, "sample: (%05dus %s)\n",
- TO_US(ev->duration), TO_STR(ev->pulse));
-
- if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
- return -ENOMEM;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store);
-
-/**
- * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
- * @input_dev: the struct input_dev device descriptor
- * @type: the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) is used to
- * store the beginning of an ir pulse or space (or the start/end of ir
- * reception) for the raw ir decoding state machines. This is used by
- * hardware which does not provide durations directly but only interrupts
- * (or similar events) on state change.
- */
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- ktime_t now;
- s64 delta; /* ns */
- struct ir_raw_event ev;
- int rc = 0;
-
- if (!ir->raw)
- return -EINVAL;
-
- now = ktime_get();
- delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
-
- /* Check for a long duration since last event or if we're
- * being called for the first time, note that delta can't
- * possibly be negative.
- */
- ev.duration = 0;
- if (delta > IR_MAX_DURATION || !ir->raw->last_type)
- type |= IR_START_EVENT;
- else
- ev.duration = delta;
-
- if (type & IR_START_EVENT)
- ir_raw_event_reset(input_dev);
- else if (ir->raw->last_type & IR_SPACE) {
- ev.pulse = false;
- rc = ir_raw_event_store(input_dev, &ev);
- } else if (ir->raw->last_type & IR_PULSE) {
- ev.pulse = true;
- rc = ir_raw_event_store(input_dev, &ev);
- } else
- return 0;
-
- ir->raw->last_event = now;
- ir->raw->last_type = type;
- return rc;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
-
-/**
- * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
- * @input_dev: the struct input_dev device descriptor
- * @type: the type of the event that has occurred
- *
- * This routine (which may be called from an interrupt context) works
- * in similiar manner to ir_raw_event_store_edge.
- * This routine is intended for devices with limited internal buffer
- * It automerges samples of same type, and handles timeouts
- */
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
- struct ir_raw_event *ev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- struct ir_raw_event_ctrl *raw = ir->raw;
-
- if (!raw || !ir->props)
- return -EINVAL;
-
- /* Ignore spaces in idle mode */
- if (ir->idle && !ev->pulse)
- return 0;
- else if (ir->idle)
- ir_raw_event_set_idle(input_dev, false);
-
- if (!raw->this_ev.duration) {
- raw->this_ev = *ev;
- } else if (ev->pulse == raw->this_ev.pulse) {
- raw->this_ev.duration += ev->duration;
- } else {
- ir_raw_event_store(input_dev, &raw->this_ev);
- raw->this_ev = *ev;
- }
-
- /* Enter idle mode if nessesary */
- if (!ev->pulse && ir->props->timeout &&
- raw->this_ev.duration >= ir->props->timeout) {
- ir_raw_event_set_idle(input_dev, true);
- }
- return 0;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
-
-/**
- * ir_raw_event_set_idle() - hint the ir core if device is receiving
- * IR data or not
- * @input_dev: the struct input_dev device descriptor
- * @idle: the hint value
- */
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- struct ir_raw_event_ctrl *raw = ir->raw;
-
- if (!ir->props || !ir->raw)
- return;
-
- IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
-
- if (idle) {
- raw->this_ev.timeout = true;
- ir_raw_event_store(input_dev, &raw->this_ev);
- init_ir_raw_event(&raw->this_ev);
- }
-
- if (ir->props->s_idle)
- ir->props->s_idle(ir->props->priv, idle);
- ir->idle = idle;
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
-
-/**
- * ir_raw_event_handle() - schedules the decoding of stored ir data
- * @input_dev: the struct input_dev device descriptor
- *
- * This routine will signal the workqueue to start decoding stored ir data.
- */
-void ir_raw_event_handle(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- unsigned long flags;
-
- if (!ir->raw)
- return;
-
- spin_lock_irqsave(&ir->raw->lock, flags);
- wake_up_process(ir->raw->thread);
- spin_unlock_irqrestore(&ir->raw->lock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_raw_event_handle);
-
-/* used internally by the sysfs interface */
-u64
-ir_raw_get_allowed_protocols()
-{
- u64 protocols;
- mutex_lock(&ir_raw_handler_lock);
- protocols = available_protocols;
- mutex_unlock(&ir_raw_handler_lock);
- return protocols;
-}
-
-/*
- * Used to (un)register raw event clients
- */
-int ir_raw_event_register(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- int rc;
- struct ir_raw_handler *handler;
-
- ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
- if (!ir->raw)
- return -ENOMEM;
-
- ir->raw->input_dev = input_dev;
-
- ir->raw->enabled_protocols = ~0;
- rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
- GFP_KERNEL);
- if (rc < 0) {
- kfree(ir->raw);
- ir->raw = NULL;
- return rc;
- }
-
- spin_lock_init(&ir->raw->lock);
- ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
- "rc%u", (unsigned int)ir->devno);
-
- if (IS_ERR(ir->raw->thread)) {
- int ret = PTR_ERR(ir->raw->thread);
-
- kfree(ir->raw);
- ir->raw = NULL;
- return ret;
- }
-
- mutex_lock(&ir_raw_handler_lock);
- list_add_tail(&ir->raw->list, &ir_raw_client_list);
- list_for_each_entry(handler, &ir_raw_handler_list, list)
- if (handler->raw_register)
- handler->raw_register(ir->raw->input_dev);
- mutex_unlock(&ir_raw_handler_lock);
-
- return 0;
-}
-
-void ir_raw_event_unregister(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir = input_get_drvdata(input_dev);
- struct ir_raw_handler *handler;
-
- if (!ir->raw)
- return;
-
- kthread_stop(ir->raw->thread);
-
- mutex_lock(&ir_raw_handler_lock);
- list_del(&ir->raw->list);
- list_for_each_entry(handler, &ir_raw_handler_list, list)
- if (handler->raw_unregister)
- handler->raw_unregister(ir->raw->input_dev);
- mutex_unlock(&ir_raw_handler_lock);
-
- kfifo_free(&ir->raw->kfifo);
- kfree(ir->raw);
- ir->raw = NULL;
-}
-
-/*
- * Extension interface - used to register the IR decoders
- */
-
-int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
-{
- struct ir_raw_event_ctrl *raw;
-
- mutex_lock(&ir_raw_handler_lock);
- list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
- if (ir_raw_handler->raw_register)
- list_for_each_entry(raw, &ir_raw_client_list, list)
- ir_raw_handler->raw_register(raw->input_dev);
- available_protocols |= ir_raw_handler->protocols;
- mutex_unlock(&ir_raw_handler_lock);
-
- return 0;
-}
-EXPORT_SYMBOL(ir_raw_handler_register);
-
-void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
-{
- struct ir_raw_event_ctrl *raw;
-
- mutex_lock(&ir_raw_handler_lock);
- list_del(&ir_raw_handler->list);
- if (ir_raw_handler->raw_unregister)
- list_for_each_entry(raw, &ir_raw_client_list, list)
- ir_raw_handler->raw_unregister(raw->input_dev);
- available_protocols &= ~ir_raw_handler->protocols;
- mutex_unlock(&ir_raw_handler_lock);
-}
-EXPORT_SYMBOL(ir_raw_handler_unregister);
-
-#ifdef MODULE
-static void init_decoders(struct work_struct *work)
-{
- /* Load the decoder modules */
-
- load_nec_decode();
- load_rc5_decode();
- load_rc6_decode();
- load_jvc_decode();
- load_sony_decode();
- load_lirc_codec();
-
- /* If needed, we may later add some init code. In this case,
- it is needed to change the CONFIG_MODULE test at ir-core.h
- */
-}
-#endif
-
-void ir_raw_init(void)
-{
-#ifdef MODULE
- INIT_WORK(&wq_load, init_decoders);
- schedule_work(&wq_load);
-#endif
-}
+++ /dev/null
-/* ir-rc5-decoder.c - handle RC5(x) IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * This code handles 14 bits RC5 protocols and 20 bits RC5x protocols.
- * There are other variants that use a different number of bits.
- * This is currently unsupported.
- * It considers a carrier of 36 kHz, with a total of 14/20 bits, where
- * the first two bits are start bits, and a third one is a filing bit
- */
-
-#include "ir-core-priv.h"
-
-#define RC5_NBITS 14
-#define RC5X_NBITS 20
-#define CHECK_RC5X_NBITS 8
-#define RC5_UNIT 888888 /* ns */
-#define RC5_BIT_START (1 * RC5_UNIT)
-#define RC5_BIT_END (1 * RC5_UNIT)
-#define RC5X_SPACE (4 * RC5_UNIT)
-
-enum rc5_state {
- STATE_INACTIVE,
- STATE_BIT_START,
- STATE_BIT_END,
- STATE_CHECK_RC5X,
- STATE_FINISHED,
-};
-
-/**
- * ir_rc5_decode() - Decode one RC-5 pulse or space
- * @input_dev: the struct input_dev descriptor of the device
- * @ev: the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct rc5_dec *data = &ir_dev->raw->rc5;
- u8 toggle;
- u32 scancode;
-
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5))
- return 0;
-
- if (!is_timing_event(ev)) {
- if (ev.reset)
- data->state = STATE_INACTIVE;
- return 0;
- }
-
- if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
- goto out;
-
-again:
- IR_dprintk(2, "RC5(x) decode started at state %i (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
- if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
- return 0;
-
- switch (data->state) {
-
- case STATE_INACTIVE:
- if (!ev.pulse)
- break;
-
- data->state = STATE_BIT_START;
- data->count = 1;
- /* We just need enough bits to get to STATE_CHECK_RC5X */
- data->wanted_bits = RC5X_NBITS;
- decrease_duration(&ev, RC5_BIT_START);
- goto again;
-
- case STATE_BIT_START:
- if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
- break;
-
- data->bits <<= 1;
- if (!ev.pulse)
- data->bits |= 1;
- data->count++;
- data->state = STATE_BIT_END;
- return 0;
-
- case STATE_BIT_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev))
- break;
-
- if (data->count == data->wanted_bits)
- data->state = STATE_FINISHED;
- else if (data->count == CHECK_RC5X_NBITS)
- data->state = STATE_CHECK_RC5X;
- else
- data->state = STATE_BIT_START;
-
- decrease_duration(&ev, RC5_BIT_END);
- goto again;
-
- case STATE_CHECK_RC5X:
- if (!ev.pulse && geq_margin(ev.duration, RC5X_SPACE, RC5_UNIT / 2)) {
- /* RC5X */
- data->wanted_bits = RC5X_NBITS;
- decrease_duration(&ev, RC5X_SPACE);
- } else {
- /* RC5 */
- data->wanted_bits = RC5_NBITS;
- }
- data->state = STATE_BIT_START;
- goto again;
-
- case STATE_FINISHED:
- if (ev.pulse)
- break;
-
- if (data->wanted_bits == RC5X_NBITS) {
- /* RC5X */
- u8 xdata, command, system;
- xdata = (data->bits & 0x0003F) >> 0;
- command = (data->bits & 0x00FC0) >> 6;
- system = (data->bits & 0x1F000) >> 12;
- toggle = (data->bits & 0x20000) ? 1 : 0;
- command += (data->bits & 0x01000) ? 0 : 0x40;
- scancode = system << 16 | command << 8 | xdata;
-
- IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n",
- scancode, toggle);
-
- } else {
- /* RC5 */
- u8 command, system;
- command = (data->bits & 0x0003F) >> 0;
- system = (data->bits & 0x007C0) >> 6;
- toggle = (data->bits & 0x00800) ? 1 : 0;
- command += (data->bits & 0x01000) ? 0 : 0x40;
- scancode = system << 8 | command;
-
- IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n",
- scancode, toggle);
- }
-
- ir_keydown(input_dev, scancode, toggle);
- data->state = STATE_INACTIVE;
- return 0;
- }
-
-out:
- IR_dprintk(1, "RC5(x) decode failed at state %i (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
- data->state = STATE_INACTIVE;
- return -EINVAL;
-}
-
-static struct ir_raw_handler rc5_handler = {
- .protocols = IR_TYPE_RC5,
- .decode = ir_rc5_decode,
-};
-
-static int __init ir_rc5_decode_init(void)
-{
- ir_raw_handler_register(&rc5_handler);
-
- printk(KERN_INFO "IR RC5(x) protocol handler initialized\n");
- return 0;
-}
-
-static void __exit ir_rc5_decode_exit(void)
-{
- ir_raw_handler_unregister(&rc5_handler);
-}
-
-module_init(ir_rc5_decode_init);
-module_exit(ir_rc5_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("RC5(x) IR protocol decoder");
+++ /dev/null
-/* ir-rc5-sz-decoder.c - handle RC5 Streamzap IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * This code handles the 15 bit RC5-ish protocol used by the Streamzap
- * PC Remote.
- * It considers a carrier of 36 kHz, with a total of 15 bits, where
- * the first two bits are start bits, and a third one is a filing bit
- */
-
-#include "ir-core-priv.h"
-
-#define RC5_SZ_NBITS 15
-#define RC5_UNIT 888888 /* ns */
-#define RC5_BIT_START (1 * RC5_UNIT)
-#define RC5_BIT_END (1 * RC5_UNIT)
-
-enum rc5_sz_state {
- STATE_INACTIVE,
- STATE_BIT_START,
- STATE_BIT_END,
- STATE_FINISHED,
-};
-
-/**
- * ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space
- * @input_dev: the struct input_dev descriptor of the device
- * @ev: the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_rc5_sz_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct rc5_sz_dec *data = &ir_dev->raw->rc5_sz;
- u8 toggle, command, system;
- u32 scancode;
-
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
- return 0;
-
- if (!is_timing_event(ev)) {
- if (ev.reset)
- data->state = STATE_INACTIVE;
- return 0;
- }
-
- if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
- goto out;
-
-again:
- IR_dprintk(2, "RC5-sz decode started at state %i (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
- if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
- return 0;
-
- switch (data->state) {
-
- case STATE_INACTIVE:
- if (!ev.pulse)
- break;
-
- data->state = STATE_BIT_START;
- data->count = 1;
- data->wanted_bits = RC5_SZ_NBITS;
- decrease_duration(&ev, RC5_BIT_START);
- goto again;
-
- case STATE_BIT_START:
- if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
- break;
-
- data->bits <<= 1;
- if (!ev.pulse)
- data->bits |= 1;
- data->count++;
- data->state = STATE_BIT_END;
- return 0;
-
- case STATE_BIT_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev))
- break;
-
- if (data->count == data->wanted_bits)
- data->state = STATE_FINISHED;
- else
- data->state = STATE_BIT_START;
-
- decrease_duration(&ev, RC5_BIT_END);
- goto again;
-
- case STATE_FINISHED:
- if (ev.pulse)
- break;
-
- /* RC5-sz */
- command = (data->bits & 0x0003F) >> 0;
- system = (data->bits & 0x02FC0) >> 6;
- toggle = (data->bits & 0x01000) ? 1 : 0;
- scancode = system << 6 | command;
-
- IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
- scancode, toggle);
-
- ir_keydown(input_dev, scancode, toggle);
- data->state = STATE_INACTIVE;
- return 0;
- }
-
-out:
- IR_dprintk(1, "RC5-sz decode failed at state %i (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
- data->state = STATE_INACTIVE;
- return -EINVAL;
-}
-
-static struct ir_raw_handler rc5_sz_handler = {
- .protocols = IR_TYPE_RC5_SZ,
- .decode = ir_rc5_sz_decode,
-};
-
-static int __init ir_rc5_sz_decode_init(void)
-{
- ir_raw_handler_register(&rc5_sz_handler);
-
- printk(KERN_INFO "IR RC5 (streamzap) protocol handler initialized\n");
- return 0;
-}
-
-static void __exit ir_rc5_sz_decode_exit(void)
-{
- ir_raw_handler_unregister(&rc5_sz_handler);
-}
-
-module_init(ir_rc5_sz_decode_init);
-module_exit(ir_rc5_sz_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("RC5 (streamzap) IR protocol decoder");
+++ /dev/null
-/* ir-rc6-decoder.c - A decoder for the RC6 IR protocol
- *
- * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include "ir-core-priv.h"
-
-/*
- * This decoder currently supports:
- * RC6-0-16 (standard toggle bit in header)
- * RC6-6A-24 (no toggle bit)
- * RC6-6A-32 (MCE version with toggle bit in body)
- */
-
-#define RC6_UNIT 444444 /* us */
-#define RC6_HEADER_NBITS 4 /* not including toggle bit */
-#define RC6_0_NBITS 16
-#define RC6_6A_SMALL_NBITS 24
-#define RC6_6A_LARGE_NBITS 32
-#define RC6_PREFIX_PULSE (6 * RC6_UNIT)
-#define RC6_PREFIX_SPACE (2 * RC6_UNIT)
-#define RC6_BIT_START (1 * RC6_UNIT)
-#define RC6_BIT_END (1 * RC6_UNIT)
-#define RC6_TOGGLE_START (2 * RC6_UNIT)
-#define RC6_TOGGLE_END (2 * RC6_UNIT)
-#define RC6_MODE_MASK 0x07 /* for the header bits */
-#define RC6_STARTBIT_MASK 0x08 /* for the header bits */
-#define RC6_6A_MCE_TOGGLE_MASK 0x8000 /* for the body bits */
-
-enum rc6_mode {
- RC6_MODE_0,
- RC6_MODE_6A,
- RC6_MODE_UNKNOWN,
-};
-
-enum rc6_state {
- STATE_INACTIVE,
- STATE_PREFIX_SPACE,
- STATE_HEADER_BIT_START,
- STATE_HEADER_BIT_END,
- STATE_TOGGLE_START,
- STATE_TOGGLE_END,
- STATE_BODY_BIT_START,
- STATE_BODY_BIT_END,
- STATE_FINISHED,
-};
-
-static enum rc6_mode rc6_mode(struct rc6_dec *data)
-{
- switch (data->header & RC6_MODE_MASK) {
- case 0:
- return RC6_MODE_0;
- case 6:
- if (!data->toggle)
- return RC6_MODE_6A;
- /* fall through */
- default:
- return RC6_MODE_UNKNOWN;
- }
-}
-
-/**
- * ir_rc6_decode() - Decode one RC6 pulse or space
- * @input_dev: the struct input_dev descriptor of the device
- * @ev: the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct rc6_dec *data = &ir_dev->raw->rc6;
- u32 scancode;
- u8 toggle;
-
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
- return 0;
-
- if (!is_timing_event(ev)) {
- if (ev.reset)
- data->state = STATE_INACTIVE;
- return 0;
- }
-
- if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
- goto out;
-
-again:
- IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
- if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
- return 0;
-
- switch (data->state) {
-
- case STATE_INACTIVE:
- if (!ev.pulse)
- break;
-
- /* Note: larger margin on first pulse since each RC6_UNIT
- is quite short and some hardware takes some time to
- adjust to the signal */
- if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT))
- break;
-
- data->state = STATE_PREFIX_SPACE;
- data->count = 0;
- return 0;
-
- case STATE_PREFIX_SPACE:
- if (ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2))
- break;
-
- data->state = STATE_HEADER_BIT_START;
- return 0;
-
- case STATE_HEADER_BIT_START:
- if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
- break;
-
- data->header <<= 1;
- if (ev.pulse)
- data->header |= 1;
- data->count++;
- data->state = STATE_HEADER_BIT_END;
- return 0;
-
- case STATE_HEADER_BIT_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev))
- break;
-
- if (data->count == RC6_HEADER_NBITS)
- data->state = STATE_TOGGLE_START;
- else
- data->state = STATE_HEADER_BIT_START;
-
- decrease_duration(&ev, RC6_BIT_END);
- goto again;
-
- case STATE_TOGGLE_START:
- if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
- break;
-
- data->toggle = ev.pulse;
- data->state = STATE_TOGGLE_END;
- return 0;
-
- case STATE_TOGGLE_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
- !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
- break;
-
- if (!(data->header & RC6_STARTBIT_MASK)) {
- IR_dprintk(1, "RC6 invalid start bit\n");
- break;
- }
-
- data->state = STATE_BODY_BIT_START;
- decrease_duration(&ev, RC6_TOGGLE_END);
- data->count = 0;
-
- switch (rc6_mode(data)) {
- case RC6_MODE_0:
- data->wanted_bits = RC6_0_NBITS;
- break;
- case RC6_MODE_6A:
- /* This might look weird, but we basically
- check the value of the first body bit to
- determine the number of bits in mode 6A */
- if ((!ev.pulse && !geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) ||
- geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
- data->wanted_bits = RC6_6A_LARGE_NBITS;
- else
- data->wanted_bits = RC6_6A_SMALL_NBITS;
- break;
- default:
- IR_dprintk(1, "RC6 unknown mode\n");
- goto out;
- }
- goto again;
-
- case STATE_BODY_BIT_START:
- if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
- break;
-
- data->body <<= 1;
- if (ev.pulse)
- data->body |= 1;
- data->count++;
- data->state = STATE_BODY_BIT_END;
- return 0;
-
- case STATE_BODY_BIT_END:
- if (!is_transition(&ev, &ir_dev->raw->prev_ev))
- break;
-
- if (data->count == data->wanted_bits)
- data->state = STATE_FINISHED;
- else
- data->state = STATE_BODY_BIT_START;
-
- decrease_duration(&ev, RC6_BIT_END);
- goto again;
-
- case STATE_FINISHED:
- if (ev.pulse)
- break;
-
- switch (rc6_mode(data)) {
- case RC6_MODE_0:
- scancode = data->body & 0xffff;
- toggle = data->toggle;
- IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
- scancode, toggle);
- break;
- case RC6_MODE_6A:
- if (data->wanted_bits == RC6_6A_LARGE_NBITS) {
- toggle = data->body & RC6_6A_MCE_TOGGLE_MASK ? 1 : 0;
- scancode = data->body & ~RC6_6A_MCE_TOGGLE_MASK;
- } else {
- toggle = 0;
- scancode = data->body & 0xffffff;
- }
-
- IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
- scancode, toggle);
- break;
- default:
- IR_dprintk(1, "RC6 unknown mode\n");
- goto out;
- }
-
- ir_keydown(input_dev, scancode, toggle);
- data->state = STATE_INACTIVE;
- return 0;
- }
-
-out:
- IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
- data->state = STATE_INACTIVE;
- return -EINVAL;
-}
-
-static struct ir_raw_handler rc6_handler = {
- .protocols = IR_TYPE_RC6,
- .decode = ir_rc6_decode,
-};
-
-static int __init ir_rc6_decode_init(void)
-{
- ir_raw_handler_register(&rc6_handler);
-
- printk(KERN_INFO "IR RC6 protocol handler initialized\n");
- return 0;
-}
-
-static void __exit ir_rc6_decode_exit(void)
-{
- ir_raw_handler_unregister(&rc6_handler);
-}
-
-module_init(ir_rc6_decode_init);
-module_exit(ir_rc6_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("RC6 IR protocol decoder");
+++ /dev/null
-/* ir-sony-decoder.c - handle Sony IR Pulse/Space protocol
- *
- * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/bitrev.h>
-#include "ir-core-priv.h"
-
-#define SONY_UNIT 600000 /* ns */
-#define SONY_HEADER_PULSE (4 * SONY_UNIT)
-#define SONY_HEADER_SPACE (1 * SONY_UNIT)
-#define SONY_BIT_0_PULSE (1 * SONY_UNIT)
-#define SONY_BIT_1_PULSE (2 * SONY_UNIT)
-#define SONY_BIT_SPACE (1 * SONY_UNIT)
-#define SONY_TRAILER_SPACE (10 * SONY_UNIT) /* minimum */
-
-enum sony_state {
- STATE_INACTIVE,
- STATE_HEADER_SPACE,
- STATE_BIT_PULSE,
- STATE_BIT_SPACE,
- STATE_FINISHED,
-};
-
-/**
- * ir_sony_decode() - Decode one Sony pulse or space
- * @input_dev: the struct input_dev descriptor of the device
- * @ev: the struct ir_raw_event descriptor of the pulse/space
- *
- * This function returns -EINVAL if the pulse violates the state machine
- */
-static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- struct sony_dec *data = &ir_dev->raw->sony;
- u32 scancode;
- u8 device, subdevice, function;
-
- if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
- return 0;
-
- if (!is_timing_event(ev)) {
- if (ev.reset)
- data->state = STATE_INACTIVE;
- return 0;
- }
-
- if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2))
- goto out;
-
- IR_dprintk(2, "Sony decode started at state %d (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
-
- switch (data->state) {
-
- case STATE_INACTIVE:
- if (!ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2))
- break;
-
- data->count = 0;
- data->state = STATE_HEADER_SPACE;
- return 0;
-
- case STATE_HEADER_SPACE:
- if (ev.pulse)
- break;
-
- if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2))
- break;
-
- data->state = STATE_BIT_PULSE;
- return 0;
-
- case STATE_BIT_PULSE:
- if (!ev.pulse)
- break;
-
- data->bits <<= 1;
- if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2))
- data->bits |= 1;
- else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2))
- break;
-
- data->count++;
- data->state = STATE_BIT_SPACE;
- return 0;
-
- case STATE_BIT_SPACE:
- if (ev.pulse)
- break;
-
- if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2))
- break;
-
- decrease_duration(&ev, SONY_BIT_SPACE);
-
- if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) {
- data->state = STATE_BIT_PULSE;
- return 0;
- }
-
- data->state = STATE_FINISHED;
- /* Fall through */
-
- case STATE_FINISHED:
- if (ev.pulse)
- break;
-
- if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2))
- break;
-
- switch (data->count) {
- case 12:
- device = bitrev8((data->bits << 3) & 0xF8);
- subdevice = 0;
- function = bitrev8((data->bits >> 4) & 0xFE);
- break;
- case 15:
- device = bitrev8((data->bits >> 0) & 0xFF);
- subdevice = 0;
- function = bitrev8((data->bits >> 7) & 0xFD);
- break;
- case 20:
- device = bitrev8((data->bits >> 5) & 0xF8);
- subdevice = bitrev8((data->bits >> 0) & 0xFF);
- function = bitrev8((data->bits >> 12) & 0xFE);
- break;
- default:
- IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
- goto out;
- }
-
- scancode = device << 16 | subdevice << 8 | function;
- IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
- ir_keydown(input_dev, scancode, 0);
- data->state = STATE_INACTIVE;
- return 0;
- }
-
-out:
- IR_dprintk(1, "Sony decode failed at state %d (%uus %s)\n",
- data->state, TO_US(ev.duration), TO_STR(ev.pulse));
- data->state = STATE_INACTIVE;
- return -EINVAL;
-}
-
-static struct ir_raw_handler sony_handler = {
- .protocols = IR_TYPE_SONY,
- .decode = ir_sony_decode,
-};
-
-static int __init ir_sony_decode_init(void)
-{
- ir_raw_handler_register(&sony_handler);
-
- printk(KERN_INFO "IR Sony protocol handler initialized\n");
- return 0;
-}
-
-static void __exit ir_sony_decode_exit(void)
-{
- ir_raw_handler_unregister(&sony_handler);
-}
-
-module_init(ir_sony_decode_init);
-module_exit(ir_sony_decode_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("Sony IR protocol decoder");
+++ /dev/null
-/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/device.h>
-#include "ir-core-priv.h"
-
-#define IRRCV_NUM_DEVICES 256
-
-/* bit array to represent IR sysfs device number */
-static unsigned long ir_core_dev_number;
-
-/* class for /sys/class/rc */
-static char *ir_devnode(struct device *dev, mode_t *mode)
-{
- return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
-}
-
-static struct class ir_input_class = {
- .name = "rc",
- .devnode = ir_devnode,
-};
-
-static struct {
- u64 type;
- char *name;
-} proto_names[] = {
- { IR_TYPE_UNKNOWN, "unknown" },
- { IR_TYPE_RC5, "rc-5" },
- { IR_TYPE_NEC, "nec" },
- { IR_TYPE_RC6, "rc-6" },
- { IR_TYPE_JVC, "jvc" },
- { IR_TYPE_SONY, "sony" },
- { IR_TYPE_RC5_SZ, "rc-5-sz" },
- { IR_TYPE_LIRC, "lirc" },
-};
-
-#define PROTO_NONE "none"
-
-/**
- * show_protocols() - shows the current IR protocol(s)
- * @d: the device descriptor
- * @mattr: the device attribute struct (unused)
- * @buf: a pointer to the output buffer
- *
- * This routine is a callback routine for input read the IR protocol type(s).
- * it is trigged by reading /sys/class/rc/rc?/protocols.
- * It returns the protocol names of supported protocols.
- * Enabled protocols are printed in brackets.
- */
-static ssize_t show_protocols(struct device *d,
- struct device_attribute *mattr, char *buf)
-{
- struct ir_input_dev *ir_dev = dev_get_drvdata(d);
- u64 allowed, enabled;
- char *tmp = buf;
- int i;
-
- /* Device is being removed */
- if (!ir_dev)
- return -EINVAL;
-
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
- enabled = ir_dev->rc_tab.ir_type;
- allowed = ir_dev->props->allowed_protos;
- } else if (ir_dev->raw) {
- enabled = ir_dev->raw->enabled_protocols;
- allowed = ir_raw_get_allowed_protocols();
- } else
- return sprintf(tmp, "[builtin]\n");
-
- IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
- (long long)allowed,
- (long long)enabled);
-
- for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
- if (allowed & enabled & proto_names[i].type)
- tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
- else if (allowed & proto_names[i].type)
- tmp += sprintf(tmp, "%s ", proto_names[i].name);
- }
-
- if (tmp != buf)
- tmp--;
- *tmp = '\n';
- return tmp + 1 - buf;
-}
-
-/**
- * store_protocols() - changes the current IR protocol(s)
- * @d: the device descriptor
- * @mattr: the device attribute struct (unused)
- * @buf: a pointer to the input buffer
- * @len: length of the input buffer
- *
- * This routine is a callback routine for changing the IR protocol type.
- * It is trigged by writing to /sys/class/rc/rc?/protocols.
- * Writing "+proto" will add a protocol to the list of enabled protocols.
- * Writing "-proto" will remove a protocol from the list of enabled protocols.
- * Writing "proto" will enable only "proto".
- * Writing "none" will disable all protocols.
- * Returns -EINVAL if an invalid protocol combination or unknown protocol name
- * is used, otherwise @len.
- */
-static ssize_t store_protocols(struct device *d,
- struct device_attribute *mattr,
- const char *data,
- size_t len)
-{
- struct ir_input_dev *ir_dev = dev_get_drvdata(d);
- bool enable, disable;
- const char *tmp;
- u64 type;
- u64 mask;
- int rc, i, count = 0;
- unsigned long flags;
-
- /* Device is being removed */
- if (!ir_dev)
- return -EINVAL;
-
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
- type = ir_dev->rc_tab.ir_type;
- else if (ir_dev->raw)
- type = ir_dev->raw->enabled_protocols;
- else {
- IR_dprintk(1, "Protocol switching not supported\n");
- return -EINVAL;
- }
-
- while ((tmp = strsep((char **) &data, " \n")) != NULL) {
- if (!*tmp)
- break;
-
- if (*tmp == '+') {
- enable = true;
- disable = false;
- tmp++;
- } else if (*tmp == '-') {
- enable = false;
- disable = true;
- tmp++;
- } else {
- enable = false;
- disable = false;
- }
-
- if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
- tmp += sizeof(PROTO_NONE);
- mask = 0;
- count++;
- } else {
- for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
- if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
- tmp += strlen(proto_names[i].name);
- mask = proto_names[i].type;
- break;
- }
- }
- if (i == ARRAY_SIZE(proto_names)) {
- IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
- return -EINVAL;
- }
- count++;
- }
-
- if (enable)
- type |= mask;
- else if (disable)
- type &= ~mask;
- else
- type = mask;
- }
-
- if (!count) {
- IR_dprintk(1, "Protocol not specified\n");
- return -EINVAL;
- }
-
- if (ir_dev->props && ir_dev->props->change_protocol) {
- rc = ir_dev->props->change_protocol(ir_dev->props->priv,
- type);
- if (rc < 0) {
- IR_dprintk(1, "Error setting protocols to 0x%llx\n",
- (long long)type);
- return -EINVAL;
- }
- }
-
- if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
- spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
- ir_dev->rc_tab.ir_type = type;
- spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
- } else {
- ir_dev->raw->enabled_protocols = type;
- }
-
- IR_dprintk(1, "Current protocol(s): 0x%llx\n",
- (long long)type);
-
- return len;
-}
-
-#define ADD_HOTPLUG_VAR(fmt, val...) \
- do { \
- int err = add_uevent_var(env, fmt, val); \
- if (err) \
- return err; \
- } while (0)
-
-static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
-{
- struct ir_input_dev *ir_dev = dev_get_drvdata(device);
-
- if (ir_dev->rc_tab.name)
- ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
- if (ir_dev->driver_name)
- ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
-
- return 0;
-}
-
-/*
- * Static device attribute struct with the sysfs attributes for IR's
- */
-static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
- show_protocols, store_protocols);
-
-static struct attribute *rc_dev_attrs[] = {
- &dev_attr_protocols.attr,
- NULL,
-};
-
-static struct attribute_group rc_dev_attr_grp = {
- .attrs = rc_dev_attrs,
-};
-
-static const struct attribute_group *rc_dev_attr_groups[] = {
- &rc_dev_attr_grp,
- NULL
-};
-
-static struct device_type rc_dev_type = {
- .groups = rc_dev_attr_groups,
- .uevent = rc_dev_uevent,
-};
-
-/**
- * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
- * @input_dev: the struct input_dev descriptor of the device
- *
- * This routine is used to register the syfs code for IR class
- */
-int ir_register_class(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- int devno = find_first_zero_bit(&ir_core_dev_number,
- IRRCV_NUM_DEVICES);
-
- if (unlikely(devno < 0))
- return devno;
-
- ir_dev->dev.type = &rc_dev_type;
- ir_dev->devno = devno;
-
- ir_dev->dev.class = &ir_input_class;
- ir_dev->dev.parent = input_dev->dev.parent;
- input_dev->dev.parent = &ir_dev->dev;
- dev_set_name(&ir_dev->dev, "rc%d", devno);
- dev_set_drvdata(&ir_dev->dev, ir_dev);
- return device_register(&ir_dev->dev);
-};
-
-/**
- * ir_register_input - registers ir input device with input subsystem
- * @input_dev: the struct input_dev descriptor of the device
- */
-
-int ir_register_input(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
- int rc;
- const char *path;
-
-
- rc = input_register_device(input_dev);
- if (rc < 0) {
- device_del(&ir_dev->dev);
- return rc;
- }
-
- __module_get(THIS_MODULE);
-
- path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
- printk(KERN_INFO "%s: %s as %s\n",
- dev_name(&ir_dev->dev),
- input_dev->name ? input_dev->name : "Unspecified device",
- path ? path : "N/A");
- kfree(path);
-
- set_bit(ir_dev->devno, &ir_core_dev_number);
- return 0;
-}
-
-/**
- * ir_unregister_class() - removes the sysfs for sysfs for
- * /sys/class/rc/rc?
- * @input_dev: the struct input_dev descriptor of the device
- *
- * This routine is used to unregister the syfs code for IR class
- */
-void ir_unregister_class(struct input_dev *input_dev)
-{
- struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
- input_set_drvdata(input_dev, NULL);
- clear_bit(ir_dev->devno, &ir_core_dev_number);
- input_unregister_device(input_dev);
- device_del(&ir_dev->dev);
-
- module_put(THIS_MODULE);
-}
-
-/*
- * Init/exit code for the module. Basically, creates/removes /sys/class/rc
- */
-
-static int __init ir_core_init(void)
-{
- int rc = class_register(&ir_input_class);
- if (rc) {
- printk(KERN_ERR "ir_core: unable to register rc class\n");
- return rc;
- }
-
- /* Initialize/load the decoders/keymap code that will be used */
- ir_raw_init();
- ir_rcmap_init();
-
- return 0;
-}
-
-static void __exit ir_core_exit(void)
-{
- class_unregister(&ir_input_class);
- ir_rcmap_cleanup();
-}
-
-module_init(ir_core_init);
-module_exit(ir_core_exit);
+++ /dev/null
-config RC_MAP
- tristate "Compile Remote Controller keymap modules"
- depends on IR_CORE
- default y
-
- ---help---
- This option enables the compilation of lots of Remote
- Controller tables. They are short tables, but if you
- don't use a remote controller, or prefer to load the
- tables on userspace, you should disable it.
-
- The ir-keytable program, available at v4l-utils package
- provide the tool and the same RC maps for load from
- userspace. Its available at
- http://git.linuxtv.org/v4l-utils
+++ /dev/null
-obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
- rc-alink-dtu-m.o \
- rc-anysee.o \
- rc-apac-viewcomp.o \
- rc-asus-pc39.o \
- rc-ati-tv-wonder-hd-600.o \
- rc-avermedia-a16d.o \
- rc-avermedia.o \
- rc-avermedia-cardbus.o \
- rc-avermedia-dvbt.o \
- rc-avermedia-m135a.o \
- rc-avermedia-m733a-rm-k6.o \
- rc-avermedia-rm-ks.o \
- rc-avertv-303.o \
- rc-azurewave-ad-tu700.o \
- rc-behold.o \
- rc-behold-columbus.o \
- rc-budget-ci-old.o \
- rc-cinergy-1400.o \
- rc-cinergy.o \
- rc-dib0700-nec.o \
- rc-dib0700-rc5.o \
- rc-digitalnow-tinytwin.o \
- rc-digittrade.o \
- rc-dm1105-nec.o \
- rc-dntv-live-dvb-t.o \
- rc-dntv-live-dvbt-pro.o \
- rc-em-terratec.o \
- rc-encore-enltv2.o \
- rc-encore-enltv.o \
- rc-encore-enltv-fm53.o \
- rc-evga-indtube.o \
- rc-eztv.o \
- rc-flydvb.o \
- rc-flyvideo.o \
- rc-fusionhdtv-mce.o \
- rc-gadmei-rm008z.o \
- rc-genius-tvgo-a11mce.o \
- rc-gotview7135.o \
- rc-hauppauge-new.o \
- rc-imon-mce.o \
- rc-imon-pad.o \
- rc-iodata-bctv7e.o \
- rc-kaiomy.o \
- rc-kworld-315u.o \
- rc-kworld-plus-tv-analog.o \
- rc-leadtek-y04g0051.o \
- rc-lirc.o \
- rc-lme2510.o \
- rc-manli.o \
- rc-msi-digivox-ii.o \
- rc-msi-digivox-iii.o \
- rc-msi-tvanywhere.o \
- rc-msi-tvanywhere-plus.o \
- rc-nebula.o \
- rc-nec-terratec-cinergy-xs.o \
- rc-norwood.o \
- rc-npgtech.o \
- rc-pctv-sedna.o \
- rc-pinnacle-color.o \
- rc-pinnacle-grey.o \
- rc-pinnacle-pctv-hd.o \
- rc-pixelview.o \
- rc-pixelview-mk12.o \
- rc-pixelview-new.o \
- rc-powercolor-real-angel.o \
- rc-proteus-2309.o \
- rc-purpletv.o \
- rc-pv951.o \
- rc-rc5-hauppauge-new.o \
- rc-rc5-tv.o \
- rc-rc6-mce.o \
- rc-real-audio-220-32-keys.o \
- rc-streamzap.o \
- rc-tbs-nec.o \
- rc-terratec-cinergy-xs.o \
- rc-terratec-slim.o \
- rc-tevii-nec.o \
- rc-total-media-in-hand.o \
- rc-trekstor.o \
- rc-tt-1500.o \
- rc-twinhan1027.o \
- rc-videomate-s350.o \
- rc-videomate-tv-pvr.o \
- rc-winfast.o \
- rc-winfast-usbii-deluxe.o
+++ /dev/null
-/* adstech-dvb-t-pci.h - Keytable for adstech_dvb_t_pci Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* ADS Tech Instant TV DVB-T PCI Remote */
-
-static struct ir_scancode adstech_dvb_t_pci[] = {
- /* Keys 0 to 9 */
- { 0x4d, KEY_0 },
- { 0x57, KEY_1 },
- { 0x4f, KEY_2 },
- { 0x53, KEY_3 },
- { 0x56, KEY_4 },
- { 0x4e, KEY_5 },
- { 0x5e, KEY_6 },
- { 0x54, KEY_7 },
- { 0x4c, KEY_8 },
- { 0x5c, KEY_9 },
-
- { 0x5b, KEY_POWER },
- { 0x5f, KEY_MUTE },
- { 0x55, KEY_GOTO },
- { 0x5d, KEY_SEARCH },
- { 0x17, KEY_EPG }, /* Guide */
- { 0x1f, KEY_MENU },
- { 0x0f, KEY_UP },
- { 0x46, KEY_DOWN },
- { 0x16, KEY_LEFT },
- { 0x1e, KEY_RIGHT },
- { 0x0e, KEY_SELECT }, /* Enter */
- { 0x5a, KEY_INFO },
- { 0x52, KEY_EXIT },
- { 0x59, KEY_PREVIOUS },
- { 0x51, KEY_NEXT },
- { 0x58, KEY_REWIND },
- { 0x50, KEY_FORWARD },
- { 0x44, KEY_PLAYPAUSE },
- { 0x07, KEY_STOP },
- { 0x1b, KEY_RECORD },
- { 0x13, KEY_TUNER }, /* Live */
- { 0x0a, KEY_A },
- { 0x12, KEY_B },
- { 0x03, KEY_PROG1 }, /* 1 */
- { 0x01, KEY_PROG2 }, /* 2 */
- { 0x00, KEY_PROG3 }, /* 3 */
- { 0x06, KEY_DVD },
- { 0x48, KEY_AUX }, /* Photo */
- { 0x40, KEY_VIDEO },
- { 0x19, KEY_AUDIO }, /* Music */
- { 0x0b, KEY_CHANNELUP },
- { 0x08, KEY_CHANNELDOWN },
- { 0x15, KEY_VOLUMEUP },
- { 0x1c, KEY_VOLUMEDOWN },
-};
-
-static struct rc_keymap adstech_dvb_t_pci_map = {
- .map = {
- .scan = adstech_dvb_t_pci,
- .size = ARRAY_SIZE(adstech_dvb_t_pci),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_ADSTECH_DVB_T_PCI,
- }
-};
-
-static int __init init_rc_map_adstech_dvb_t_pci(void)
-{
- return ir_register_map(&adstech_dvb_t_pci_map);
-}
-
-static void __exit exit_rc_map_adstech_dvb_t_pci(void)
-{
- ir_unregister_map(&adstech_dvb_t_pci_map);
-}
-
-module_init(init_rc_map_adstech_dvb_t_pci)
-module_exit(exit_rc_map_adstech_dvb_t_pci)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * A-Link DTU(m) remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* A-Link DTU(m) slim remote, 6 rows, 3 columns. */
-static struct ir_scancode alink_dtu_m[] = {
- { 0x0800, KEY_VOLUMEUP },
- { 0x0801, KEY_1 },
- { 0x0802, KEY_3 },
- { 0x0803, KEY_7 },
- { 0x0804, KEY_9 },
- { 0x0805, KEY_NEW }, /* symbol: PIP */
- { 0x0806, KEY_0 },
- { 0x0807, KEY_CHANNEL }, /* JUMP */
- { 0x080d, KEY_5 },
- { 0x080f, KEY_2 },
- { 0x0812, KEY_POWER2 },
- { 0x0814, KEY_CHANNELUP },
- { 0x0816, KEY_VOLUMEDOWN },
- { 0x0818, KEY_6 },
- { 0x081a, KEY_MUTE },
- { 0x081b, KEY_8 },
- { 0x081c, KEY_4 },
- { 0x081d, KEY_CHANNELDOWN },
-};
-
-static struct rc_keymap alink_dtu_m_map = {
- .map = {
- .scan = alink_dtu_m,
- .size = ARRAY_SIZE(alink_dtu_m),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_ALINK_DTU_M,
- }
-};
-
-static int __init init_rc_map_alink_dtu_m(void)
-{
- return ir_register_map(&alink_dtu_m_map);
-}
-
-static void __exit exit_rc_map_alink_dtu_m(void)
-{
- ir_unregister_map(&alink_dtu_m_map);
-}
-
-module_init(init_rc_map_alink_dtu_m)
-module_exit(exit_rc_map_alink_dtu_m)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/*
- * Anysee remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode anysee[] = {
- { 0x0800, KEY_0 },
- { 0x0801, KEY_1 },
- { 0x0802, KEY_2 },
- { 0x0803, KEY_3 },
- { 0x0804, KEY_4 },
- { 0x0805, KEY_5 },
- { 0x0806, KEY_6 },
- { 0x0807, KEY_7 },
- { 0x0808, KEY_8 },
- { 0x0809, KEY_9 },
- { 0x080a, KEY_POWER2 }, /* [red power button] */
- { 0x080b, KEY_VIDEO }, /* [*] MODE */
- { 0x080c, KEY_CHANNEL }, /* [symbol counterclockwise arrow] */
- { 0x080d, KEY_NEXT }, /* [>>|] */
- { 0x080e, KEY_MENU }, /* MENU */
- { 0x080f, KEY_EPG }, /* [EPG] */
- { 0x0810, KEY_CLEAR }, /* EXIT */
- { 0x0811, KEY_CHANNELUP },
- { 0x0812, KEY_VOLUMEDOWN },
- { 0x0813, KEY_VOLUMEUP },
- { 0x0814, KEY_CHANNELDOWN },
- { 0x0815, KEY_OK },
- { 0x0816, KEY_RADIO }, /* [symbol TV/radio] */
- { 0x0817, KEY_INFO }, /* [i] */
- { 0x0818, KEY_PREVIOUS }, /* [|<<] */
- { 0x0819, KEY_FAVORITES }, /* FAV. */
- { 0x081a, KEY_SUBTITLE }, /* Subtitle */
- { 0x081b, KEY_CAMERA }, /* [symbol camera] */
- { 0x081c, KEY_YELLOW },
- { 0x081d, KEY_RED },
- { 0x081e, KEY_LANGUAGE }, /* [symbol Second Audio Program] */
- { 0x081f, KEY_GREEN },
- { 0x0820, KEY_SLEEP }, /* Sleep */
- { 0x0821, KEY_SCREEN }, /* 16:9 / 4:3 */
- { 0x0822, KEY_ZOOM }, /* SIZE */
- { 0x0824, KEY_FN }, /* [F1] */
- { 0x0825, KEY_FN }, /* [F2] */
- { 0x0842, KEY_MUTE }, /* symbol mute */
- { 0x0844, KEY_BLUE },
- { 0x0847, KEY_TEXT }, /* TEXT */
- { 0x0848, KEY_STOP },
- { 0x0849, KEY_RECORD },
- { 0x0850, KEY_PLAY },
- { 0x0851, KEY_PAUSE },
-};
-
-static struct rc_keymap anysee_map = {
- .map = {
- .scan = anysee,
- .size = ARRAY_SIZE(anysee),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_ANYSEE,
- }
-};
-
-static int __init init_rc_map_anysee(void)
-{
- return ir_register_map(&anysee_map);
-}
-
-static void __exit exit_rc_map_anysee(void)
-{
- ir_unregister_map(&anysee_map);
-}
-
-module_init(init_rc_map_anysee)
-module_exit(exit_rc_map_anysee)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/* apac-viewcomp.h - Keytable for apac_viewcomp Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Attila Kondoros <attila.kondoros@chello.hu> */
-
-static struct ir_scancode apac_viewcomp[] = {
-
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
- { 0x00, KEY_0 },
- { 0x17, KEY_LAST }, /* +100 */
- { 0x0a, KEY_LIST }, /* recall */
-
-
- { 0x1c, KEY_TUNER }, /* TV/FM */
- { 0x15, KEY_SEARCH }, /* scan */
- { 0x12, KEY_POWER }, /* power */
- { 0x1f, KEY_VOLUMEDOWN }, /* vol up */
- { 0x1b, KEY_VOLUMEUP }, /* vol down */
- { 0x1e, KEY_CHANNELDOWN }, /* chn up */
- { 0x1a, KEY_CHANNELUP }, /* chn down */
-
- { 0x11, KEY_VIDEO }, /* video */
- { 0x0f, KEY_ZOOM }, /* full screen */
- { 0x13, KEY_MUTE }, /* mute/unmute */
- { 0x10, KEY_TEXT }, /* min */
-
- { 0x0d, KEY_STOP }, /* freeze */
- { 0x0e, KEY_RECORD }, /* record */
- { 0x1d, KEY_PLAYPAUSE }, /* stop */
- { 0x19, KEY_PLAY }, /* play */
-
- { 0x16, KEY_GOTO }, /* osd */
- { 0x14, KEY_REFRESH }, /* default */
- { 0x0c, KEY_KPPLUS }, /* fine tune >>>> */
- { 0x18, KEY_KPMINUS }, /* fine tune <<<< */
-};
-
-static struct rc_keymap apac_viewcomp_map = {
- .map = {
- .scan = apac_viewcomp,
- .size = ARRAY_SIZE(apac_viewcomp),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_APAC_VIEWCOMP,
- }
-};
-
-static int __init init_rc_map_apac_viewcomp(void)
-{
- return ir_register_map(&apac_viewcomp_map);
-}
-
-static void __exit exit_rc_map_apac_viewcomp(void)
-{
- ir_unregister_map(&apac_viewcomp_map);
-}
-
-module_init(init_rc_map_apac_viewcomp)
-module_exit(exit_rc_map_apac_viewcomp)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* asus-pc39.h - Keytable for asus_pc39 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Marc Fargas <telenieko@telenieko.com>
- * this is the remote control that comes with the asus p7131
- * which has a label saying is "Model PC-39"
- */
-
-static struct ir_scancode asus_pc39[] = {
- /* Keys 0 to 9 */
- { 0x082a, KEY_0 },
- { 0x0816, KEY_1 },
- { 0x0812, KEY_2 },
- { 0x0814, KEY_3 },
- { 0x0836, KEY_4 },
- { 0x0832, KEY_5 },
- { 0x0834, KEY_6 },
- { 0x080e, KEY_7 },
- { 0x080a, KEY_8 },
- { 0x080c, KEY_9 },
-
- { 0x0801, KEY_RADIO }, /* radio */
- { 0x083c, KEY_MENU }, /* dvd/menu */
- { 0x0815, KEY_VOLUMEUP },
- { 0x0826, KEY_VOLUMEDOWN },
- { 0x0808, KEY_UP },
- { 0x0804, KEY_DOWN },
- { 0x0818, KEY_LEFT },
- { 0x0810, KEY_RIGHT },
- { 0x081a, KEY_VIDEO }, /* video */
- { 0x0806, KEY_AUDIO }, /* music */
-
- { 0x081e, KEY_TV }, /* tv */
- { 0x0822, KEY_EXIT }, /* back */
- { 0x0835, KEY_CHANNELUP }, /* channel / program + */
- { 0x0824, KEY_CHANNELDOWN }, /* channel / program - */
- { 0x0825, KEY_ENTER }, /* enter */
-
- { 0x0839, KEY_PAUSE }, /* play/pause */
- { 0x0821, KEY_PREVIOUS }, /* rew */
- { 0x0819, KEY_NEXT }, /* forward */
- { 0x0831, KEY_REWIND }, /* backward << */
- { 0x0805, KEY_FASTFORWARD }, /* forward >> */
- { 0x0809, KEY_STOP },
- { 0x0811, KEY_RECORD }, /* recording */
- { 0x0829, KEY_POWER }, /* the button that reads "close" */
-
- { 0x082e, KEY_ZOOM }, /* full screen */
- { 0x082c, KEY_MACRO }, /* recall */
- { 0x081c, KEY_HOME }, /* home */
- { 0x083a, KEY_PVR }, /* picture */
- { 0x0802, KEY_MUTE }, /* mute */
- { 0x083e, KEY_DVD }, /* dvd */
-};
-
-static struct rc_keymap asus_pc39_map = {
- .map = {
- .scan = asus_pc39,
- .size = ARRAY_SIZE(asus_pc39),
- .ir_type = IR_TYPE_RC5,
- .name = RC_MAP_ASUS_PC39,
- }
-};
-
-static int __init init_rc_map_asus_pc39(void)
-{
- return ir_register_map(&asus_pc39_map);
-}
-
-static void __exit exit_rc_map_asus_pc39(void)
-{
- ir_unregister_map(&asus_pc39_map);
-}
-
-module_init(init_rc_map_asus_pc39)
-module_exit(exit_rc_map_asus_pc39)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* ati-tv-wonder-hd-600.h - Keytable for ati_tv_wonder_hd_600 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* ATI TV Wonder HD 600 USB
- Devin Heitmueller <devin.heitmueller@gmail.com>
- */
-
-static struct ir_scancode ati_tv_wonder_hd_600[] = {
- { 0x00, KEY_RECORD}, /* Row 1 */
- { 0x01, KEY_PLAYPAUSE},
- { 0x02, KEY_STOP},
- { 0x03, KEY_POWER},
- { 0x04, KEY_PREVIOUS}, /* Row 2 */
- { 0x05, KEY_REWIND},
- { 0x06, KEY_FORWARD},
- { 0x07, KEY_NEXT},
- { 0x08, KEY_EPG}, /* Row 3 */
- { 0x09, KEY_HOME},
- { 0x0a, KEY_MENU},
- { 0x0b, KEY_CHANNELUP},
- { 0x0c, KEY_BACK}, /* Row 4 */
- { 0x0d, KEY_UP},
- { 0x0e, KEY_INFO},
- { 0x0f, KEY_CHANNELDOWN},
- { 0x10, KEY_LEFT}, /* Row 5 */
- { 0x11, KEY_SELECT},
- { 0x12, KEY_RIGHT},
- { 0x13, KEY_VOLUMEUP},
- { 0x14, KEY_LAST}, /* Row 6 */
- { 0x15, KEY_DOWN},
- { 0x16, KEY_MUTE},
- { 0x17, KEY_VOLUMEDOWN},
-};
-
-static struct rc_keymap ati_tv_wonder_hd_600_map = {
- .map = {
- .scan = ati_tv_wonder_hd_600,
- .size = ARRAY_SIZE(ati_tv_wonder_hd_600),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_ATI_TV_WONDER_HD_600,
- }
-};
-
-static int __init init_rc_map_ati_tv_wonder_hd_600(void)
-{
- return ir_register_map(&ati_tv_wonder_hd_600_map);
-}
-
-static void __exit exit_rc_map_ati_tv_wonder_hd_600(void)
-{
- ir_unregister_map(&ati_tv_wonder_hd_600_map);
-}
-
-module_init(init_rc_map_ati_tv_wonder_hd_600)
-module_exit(exit_rc_map_ati_tv_wonder_hd_600)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* avermedia-a16d.h - Keytable for avermedia_a16d Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode avermedia_a16d[] = {
- { 0x20, KEY_LIST},
- { 0x00, KEY_POWER},
- { 0x28, KEY_1},
- { 0x18, KEY_2},
- { 0x38, KEY_3},
- { 0x24, KEY_4},
- { 0x14, KEY_5},
- { 0x34, KEY_6},
- { 0x2c, KEY_7},
- { 0x1c, KEY_8},
- { 0x3c, KEY_9},
- { 0x12, KEY_SUBTITLE},
- { 0x22, KEY_0},
- { 0x32, KEY_REWIND},
- { 0x3a, KEY_SHUFFLE},
- { 0x02, KEY_PRINT},
- { 0x11, KEY_CHANNELDOWN},
- { 0x31, KEY_CHANNELUP},
- { 0x0c, KEY_ZOOM},
- { 0x1e, KEY_VOLUMEDOWN},
- { 0x3e, KEY_VOLUMEUP},
- { 0x0a, KEY_MUTE},
- { 0x04, KEY_AUDIO},
- { 0x26, KEY_RECORD},
- { 0x06, KEY_PLAY},
- { 0x36, KEY_STOP},
- { 0x16, KEY_PAUSE},
- { 0x2e, KEY_REWIND},
- { 0x0e, KEY_FASTFORWARD},
- { 0x30, KEY_TEXT},
- { 0x21, KEY_GREEN},
- { 0x01, KEY_BLUE},
- { 0x08, KEY_EPG},
- { 0x2a, KEY_MENU},
-};
-
-static struct rc_keymap avermedia_a16d_map = {
- .map = {
- .scan = avermedia_a16d,
- .size = ARRAY_SIZE(avermedia_a16d),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_AVERMEDIA_A16D,
- }
-};
-
-static int __init init_rc_map_avermedia_a16d(void)
-{
- return ir_register_map(&avermedia_a16d_map);
-}
-
-static void __exit exit_rc_map_avermedia_a16d(void)
-{
- ir_unregister_map(&avermedia_a16d_map);
-}
-
-module_init(init_rc_map_avermedia_a16d)
-module_exit(exit_rc_map_avermedia_a16d)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* avermedia-cardbus.h - Keytable for avermedia_cardbus Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Oldrich Jedlicka <oldium.pro@seznam.cz> */
-
-static struct ir_scancode avermedia_cardbus[] = {
- { 0x00, KEY_POWER },
- { 0x01, KEY_TUNER }, /* TV/FM */
- { 0x03, KEY_TEXT }, /* Teletext */
- { 0x04, KEY_EPG },
- { 0x05, KEY_1 },
- { 0x06, KEY_2 },
- { 0x07, KEY_3 },
- { 0x08, KEY_AUDIO },
- { 0x09, KEY_4 },
- { 0x0a, KEY_5 },
- { 0x0b, KEY_6 },
- { 0x0c, KEY_ZOOM }, /* Full screen */
- { 0x0d, KEY_7 },
- { 0x0e, KEY_8 },
- { 0x0f, KEY_9 },
- { 0x10, KEY_PAGEUP }, /* 16-CH PREV */
- { 0x11, KEY_0 },
- { 0x12, KEY_INFO },
- { 0x13, KEY_AGAIN }, /* CH RTN - channel return */
- { 0x14, KEY_MUTE },
- { 0x15, KEY_EDIT }, /* Autoscan */
- { 0x17, KEY_SAVE }, /* Screenshot */
- { 0x18, KEY_PLAYPAUSE },
- { 0x19, KEY_RECORD },
- { 0x1a, KEY_PLAY },
- { 0x1b, KEY_STOP },
- { 0x1c, KEY_FASTFORWARD },
- { 0x1d, KEY_REWIND },
- { 0x1e, KEY_VOLUMEDOWN },
- { 0x1f, KEY_VOLUMEUP },
- { 0x22, KEY_SLEEP }, /* Sleep */
- { 0x23, KEY_ZOOM }, /* Aspect */
- { 0x26, KEY_SCREEN }, /* Pos */
- { 0x27, KEY_ANGLE }, /* Size */
- { 0x28, KEY_SELECT }, /* Select */
- { 0x29, KEY_BLUE }, /* Blue/Picture */
- { 0x2a, KEY_BACKSPACE }, /* Back */
- { 0x2b, KEY_MEDIA }, /* PIP (Picture-in-picture) */
- { 0x2c, KEY_DOWN },
- { 0x2e, KEY_DOT },
- { 0x2f, KEY_TV }, /* Live TV */
- { 0x32, KEY_LEFT },
- { 0x33, KEY_CLEAR }, /* Clear */
- { 0x35, KEY_RED }, /* Red/TV */
- { 0x36, KEY_UP },
- { 0x37, KEY_HOME }, /* Home */
- { 0x39, KEY_GREEN }, /* Green/Video */
- { 0x3d, KEY_YELLOW }, /* Yellow/Music */
- { 0x3e, KEY_OK }, /* Ok */
- { 0x3f, KEY_RIGHT },
- { 0x40, KEY_NEXT }, /* Next */
- { 0x41, KEY_PREVIOUS }, /* Previous */
- { 0x42, KEY_CHANNELDOWN }, /* Channel down */
- { 0x43, KEY_CHANNELUP }, /* Channel up */
-};
-
-static struct rc_keymap avermedia_cardbus_map = {
- .map = {
- .scan = avermedia_cardbus,
- .size = ARRAY_SIZE(avermedia_cardbus),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_AVERMEDIA_CARDBUS,
- }
-};
-
-static int __init init_rc_map_avermedia_cardbus(void)
-{
- return ir_register_map(&avermedia_cardbus_map);
-}
-
-static void __exit exit_rc_map_avermedia_cardbus(void)
-{
- ir_unregister_map(&avermedia_cardbus_map);
-}
-
-module_init(init_rc_map_avermedia_cardbus)
-module_exit(exit_rc_map_avermedia_cardbus)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* avermedia-dvbt.h - Keytable for avermedia_dvbt Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Matt Jesson <dvb@jesson.eclipse.co.uk */
-
-static struct ir_scancode avermedia_dvbt[] = {
- { 0x28, KEY_0 }, /* '0' / 'enter' */
- { 0x22, KEY_1 }, /* '1' */
- { 0x12, KEY_2 }, /* '2' / 'up arrow' */
- { 0x32, KEY_3 }, /* '3' */
- { 0x24, KEY_4 }, /* '4' / 'left arrow' */
- { 0x14, KEY_5 }, /* '5' */
- { 0x34, KEY_6 }, /* '6' / 'right arrow' */
- { 0x26, KEY_7 }, /* '7' */
- { 0x16, KEY_8 }, /* '8' / 'down arrow' */
- { 0x36, KEY_9 }, /* '9' */
-
- { 0x20, KEY_LIST }, /* 'source' */
- { 0x10, KEY_TEXT }, /* 'teletext' */
- { 0x00, KEY_POWER }, /* 'power' */
- { 0x04, KEY_AUDIO }, /* 'audio' */
- { 0x06, KEY_ZOOM }, /* 'full screen' */
- { 0x18, KEY_VIDEO }, /* 'display' */
- { 0x38, KEY_SEARCH }, /* 'loop' */
- { 0x08, KEY_INFO }, /* 'preview' */
- { 0x2a, KEY_REWIND }, /* 'backward <<' */
- { 0x1a, KEY_FASTFORWARD }, /* 'forward >>' */
- { 0x3a, KEY_RECORD }, /* 'capture' */
- { 0x0a, KEY_MUTE }, /* 'mute' */
- { 0x2c, KEY_RECORD }, /* 'record' */
- { 0x1c, KEY_PAUSE }, /* 'pause' */
- { 0x3c, KEY_STOP }, /* 'stop' */
- { 0x0c, KEY_PLAY }, /* 'play' */
- { 0x2e, KEY_RED }, /* 'red' */
- { 0x01, KEY_BLUE }, /* 'blue' / 'cancel' */
- { 0x0e, KEY_YELLOW }, /* 'yellow' / 'ok' */
- { 0x21, KEY_GREEN }, /* 'green' */
- { 0x11, KEY_CHANNELDOWN }, /* 'channel -' */
- { 0x31, KEY_CHANNELUP }, /* 'channel +' */
- { 0x1e, KEY_VOLUMEDOWN }, /* 'volume -' */
- { 0x3e, KEY_VOLUMEUP }, /* 'volume +' */
-};
-
-static struct rc_keymap avermedia_dvbt_map = {
- .map = {
- .scan = avermedia_dvbt,
- .size = ARRAY_SIZE(avermedia_dvbt),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_AVERMEDIA_DVBT,
- }
-};
-
-static int __init init_rc_map_avermedia_dvbt(void)
-{
- return ir_register_map(&avermedia_dvbt_map);
-}
-
-static void __exit exit_rc_map_avermedia_dvbt(void)
-{
- ir_unregister_map(&avermedia_dvbt_map);
-}
-
-module_init(init_rc_map_avermedia_dvbt)
-module_exit(exit_rc_map_avermedia_dvbt)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* avermedia-m135a.c - Keytable for Avermedia M135A Remote Controllers
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Avermedia M135A with RM-JX and RM-K6 remote controls
- *
- * On Avermedia M135A with IR model RM-JX, the same codes exist on both
- * Positivo (BR) and original IR, initial version and remote control codes
- * added by Mauro Carvalho Chehab <mchehab@infradead.org>
- *
- * Positivo also ships Avermedia M135A with model RM-K6, extra control
- * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- */
-
-static struct ir_scancode avermedia_m135a[] = {
- /* RM-JX */
- { 0x0200, KEY_POWER2 },
- { 0x022e, KEY_DOT }, /* '.' */
- { 0x0201, KEY_MODE }, /* TV/FM or SOURCE */
-
- { 0x0205, KEY_1 },
- { 0x0206, KEY_2 },
- { 0x0207, KEY_3 },
- { 0x0209, KEY_4 },
- { 0x020a, KEY_5 },
- { 0x020b, KEY_6 },
- { 0x020d, KEY_7 },
- { 0x020e, KEY_8 },
- { 0x020f, KEY_9 },
- { 0x0211, KEY_0 },
-
- { 0x0213, KEY_RIGHT }, /* -> or L */
- { 0x0212, KEY_LEFT }, /* <- or R */
-
- { 0x0217, KEY_SLEEP }, /* Capturar Imagem or Snapshot */
- { 0x0210, KEY_SHUFFLE }, /* Amostra or 16 chan prev */
-
- { 0x0303, KEY_CHANNELUP },
- { 0x0302, KEY_CHANNELDOWN },
- { 0x021f, KEY_VOLUMEUP },
- { 0x021e, KEY_VOLUMEDOWN },
- { 0x020c, KEY_ENTER }, /* Full Screen */
-
- { 0x0214, KEY_MUTE },
- { 0x0208, KEY_AUDIO },
-
- { 0x0203, KEY_TEXT }, /* Teletext */
- { 0x0204, KEY_EPG },
- { 0x022b, KEY_TV2 }, /* TV2 or PIP */
-
- { 0x021d, KEY_RED },
- { 0x021c, KEY_YELLOW },
- { 0x0301, KEY_GREEN },
- { 0x0300, KEY_BLUE },
-
- { 0x021a, KEY_PLAYPAUSE },
- { 0x0219, KEY_RECORD },
- { 0x0218, KEY_PLAY },
- { 0x021b, KEY_STOP },
-
- /* RM-K6 */
- { 0x0401, KEY_POWER2 },
- { 0x0406, KEY_MUTE },
- { 0x0408, KEY_MODE }, /* TV/FM */
-
- { 0x0409, KEY_1 },
- { 0x040a, KEY_2 },
- { 0x040b, KEY_3 },
- { 0x040c, KEY_4 },
- { 0x040d, KEY_5 },
- { 0x040e, KEY_6 },
- { 0x040f, KEY_7 },
- { 0x0410, KEY_8 },
- { 0x0411, KEY_9 },
- { 0x044c, KEY_DOT }, /* '.' */
- { 0x0412, KEY_0 },
- { 0x0407, KEY_REFRESH }, /* Refresh/Reload */
-
- { 0x0413, KEY_AUDIO },
- { 0x0440, KEY_SCREEN }, /* Full Screen toggle */
- { 0x0441, KEY_HOME },
- { 0x0442, KEY_BACK },
- { 0x0447, KEY_UP },
- { 0x0448, KEY_DOWN },
- { 0x0449, KEY_LEFT },
- { 0x044a, KEY_RIGHT },
- { 0x044b, KEY_OK },
- { 0x0404, KEY_VOLUMEUP },
- { 0x0405, KEY_VOLUMEDOWN },
- { 0x0402, KEY_CHANNELUP },
- { 0x0403, KEY_CHANNELDOWN },
-
- { 0x0443, KEY_RED },
- { 0x0444, KEY_GREEN },
- { 0x0445, KEY_YELLOW },
- { 0x0446, KEY_BLUE },
-
- { 0x0414, KEY_TEXT },
- { 0x0415, KEY_EPG },
- { 0x041a, KEY_TV2 }, /* PIP */
- { 0x041b, KEY_MHP }, /* Snapshot */
-
- { 0x0417, KEY_RECORD },
- { 0x0416, KEY_PLAYPAUSE },
- { 0x0418, KEY_STOP },
- { 0x0419, KEY_PAUSE },
-
- { 0x041f, KEY_PREVIOUS },
- { 0x041c, KEY_REWIND },
- { 0x041d, KEY_FORWARD },
- { 0x041e, KEY_NEXT },
-};
-
-static struct rc_keymap avermedia_m135a_map = {
- .map = {
- .scan = avermedia_m135a,
- .size = ARRAY_SIZE(avermedia_m135a),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_AVERMEDIA_M135A,
- }
-};
-
-static int __init init_rc_map_avermedia_m135a(void)
-{
- return ir_register_map(&avermedia_m135a_map);
-}
-
-static void __exit exit_rc_map_avermedia_m135a(void)
-{
- ir_unregister_map(&avermedia_m135a_map);
-}
-
-module_init(init_rc_map_avermedia_m135a)
-module_exit(exit_rc_map_avermedia_m135a)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* avermedia-m733a-rm-k6.h - Keytable for avermedia_m733a_rm_k6 Remote Controller
- *
- * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Avermedia M733A with IR model RM-K6
- * This is the stock remote controller used with Positivo machines with M733A
- * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
- */
-
-static struct ir_scancode avermedia_m733a_rm_k6[] = {
- { 0x0401, KEY_POWER2 },
- { 0x0406, KEY_MUTE },
- { 0x0408, KEY_MODE }, /* TV/FM */
-
- { 0x0409, KEY_1 },
- { 0x040a, KEY_2 },
- { 0x040b, KEY_3 },
- { 0x040c, KEY_4 },
- { 0x040d, KEY_5 },
- { 0x040e, KEY_6 },
- { 0x040f, KEY_7 },
- { 0x0410, KEY_8 },
- { 0x0411, KEY_9 },
- { 0x044c, KEY_DOT }, /* '.' */
- { 0x0412, KEY_0 },
- { 0x0407, KEY_REFRESH }, /* Refresh/Reload */
-
- { 0x0413, KEY_AUDIO },
- { 0x0440, KEY_SCREEN }, /* Full Screen toggle */
- { 0x0441, KEY_HOME },
- { 0x0442, KEY_BACK },
- { 0x0447, KEY_UP },
- { 0x0448, KEY_DOWN },
- { 0x0449, KEY_LEFT },
- { 0x044a, KEY_RIGHT },
- { 0x044b, KEY_OK },
- { 0x0404, KEY_VOLUMEUP },
- { 0x0405, KEY_VOLUMEDOWN },
- { 0x0402, KEY_CHANNELUP },
- { 0x0403, KEY_CHANNELDOWN },
-
- { 0x0443, KEY_RED },
- { 0x0444, KEY_GREEN },
- { 0x0445, KEY_YELLOW },
- { 0x0446, KEY_BLUE },
-
- { 0x0414, KEY_TEXT },
- { 0x0415, KEY_EPG },
- { 0x041a, KEY_TV2 }, /* PIP */
- { 0x041b, KEY_MHP }, /* Snapshot */
-
- { 0x0417, KEY_RECORD },
- { 0x0416, KEY_PLAYPAUSE },
- { 0x0418, KEY_STOP },
- { 0x0419, KEY_PAUSE },
-
- { 0x041f, KEY_PREVIOUS },
- { 0x041c, KEY_REWIND },
- { 0x041d, KEY_FORWARD },
- { 0x041e, KEY_NEXT },
-};
-
-static struct rc_keymap avermedia_m733a_rm_k6_map = {
- .map = {
- .scan = avermedia_m733a_rm_k6,
- .size = ARRAY_SIZE(avermedia_m733a_rm_k6),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_AVERMEDIA_M733A_RM_K6,
- }
-};
-
-static int __init init_rc_map_avermedia_m733a_rm_k6(void)
-{
- return ir_register_map(&avermedia_m733a_rm_k6_map);
-}
-
-static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
-{
- ir_unregister_map(&avermedia_m733a_rm_k6_map);
-}
-
-module_init(init_rc_map_avermedia_m733a_rm_k6)
-module_exit(exit_rc_map_avermedia_m733a_rm_k6)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * AverMedia RM-KS remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net>
- and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */
-/* FIXME: mappings are not 100% correct? */
-static struct ir_scancode avermedia_rm_ks[] = {
- { 0x0501, KEY_POWER2 },
- { 0x0502, KEY_CHANNELUP },
- { 0x0503, KEY_CHANNELDOWN },
- { 0x0504, KEY_VOLUMEUP },
- { 0x0505, KEY_VOLUMEDOWN },
- { 0x0506, KEY_MUTE },
- { 0x0507, KEY_RIGHT },
- { 0x0508, KEY_PROG1 },
- { 0x0509, KEY_1 },
- { 0x050a, KEY_2 },
- { 0x050b, KEY_3 },
- { 0x050c, KEY_4 },
- { 0x050d, KEY_5 },
- { 0x050e, KEY_6 },
- { 0x050f, KEY_7 },
- { 0x0510, KEY_8 },
- { 0x0511, KEY_9 },
- { 0x0512, KEY_0 },
- { 0x0513, KEY_AUDIO },
- { 0x0515, KEY_EPG },
- { 0x0516, KEY_PLAY },
- { 0x0517, KEY_RECORD },
- { 0x0518, KEY_STOP },
- { 0x051c, KEY_BACK },
- { 0x051d, KEY_FORWARD },
- { 0x054d, KEY_LEFT },
- { 0x0556, KEY_ZOOM },
-};
-
-static struct rc_keymap avermedia_rm_ks_map = {
- .map = {
- .scan = avermedia_rm_ks,
- .size = ARRAY_SIZE(avermedia_rm_ks),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_AVERMEDIA_RM_KS,
- }
-};
-
-static int __init init_rc_map_avermedia_rm_ks(void)
-{
- return ir_register_map(&avermedia_rm_ks_map);
-}
-
-static void __exit exit_rc_map_avermedia_rm_ks(void)
-{
- ir_unregister_map(&avermedia_rm_ks_map);
-}
-
-module_init(init_rc_map_avermedia_rm_ks)
-module_exit(exit_rc_map_avermedia_rm_ks)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/* avermedia.h - Keytable for avermedia Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Alex Hermann <gaaf@gmx.net> */
-
-static struct ir_scancode avermedia[] = {
- { 0x28, KEY_1 },
- { 0x18, KEY_2 },
- { 0x38, KEY_3 },
- { 0x24, KEY_4 },
- { 0x14, KEY_5 },
- { 0x34, KEY_6 },
- { 0x2c, KEY_7 },
- { 0x1c, KEY_8 },
- { 0x3c, KEY_9 },
- { 0x22, KEY_0 },
-
- { 0x20, KEY_TV }, /* TV/FM */
- { 0x10, KEY_CD }, /* CD */
- { 0x30, KEY_TEXT }, /* TELETEXT */
- { 0x00, KEY_POWER }, /* POWER */
-
- { 0x08, KEY_VIDEO }, /* VIDEO */
- { 0x04, KEY_AUDIO }, /* AUDIO */
- { 0x0c, KEY_ZOOM }, /* FULL SCREEN */
-
- { 0x12, KEY_SUBTITLE }, /* DISPLAY */
- { 0x32, KEY_REWIND }, /* LOOP */
- { 0x02, KEY_PRINT }, /* PREVIEW */
-
- { 0x2a, KEY_SEARCH }, /* AUTOSCAN */
- { 0x1a, KEY_SLEEP }, /* FREEZE */
- { 0x3a, KEY_CAMERA }, /* SNAPSHOT */
- { 0x0a, KEY_MUTE }, /* MUTE */
-
- { 0x26, KEY_RECORD }, /* RECORD */
- { 0x16, KEY_PAUSE }, /* PAUSE */
- { 0x36, KEY_STOP }, /* STOP */
- { 0x06, KEY_PLAY }, /* PLAY */
-
- { 0x2e, KEY_RED }, /* RED */
- { 0x21, KEY_GREEN }, /* GREEN */
- { 0x0e, KEY_YELLOW }, /* YELLOW */
- { 0x01, KEY_BLUE }, /* BLUE */
-
- { 0x1e, KEY_VOLUMEDOWN }, /* VOLUME- */
- { 0x3e, KEY_VOLUMEUP }, /* VOLUME+ */
- { 0x11, KEY_CHANNELDOWN }, /* CHANNEL/PAGE- */
- { 0x31, KEY_CHANNELUP } /* CHANNEL/PAGE+ */
-};
-
-static struct rc_keymap avermedia_map = {
- .map = {
- .scan = avermedia,
- .size = ARRAY_SIZE(avermedia),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_AVERMEDIA,
- }
-};
-
-static int __init init_rc_map_avermedia(void)
-{
- return ir_register_map(&avermedia_map);
-}
-
-static void __exit exit_rc_map_avermedia(void)
-{
- ir_unregister_map(&avermedia_map);
-}
-
-module_init(init_rc_map_avermedia)
-module_exit(exit_rc_map_avermedia)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* avertv-303.h - Keytable for avertv_303 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* AVERTV STUDIO 303 Remote */
-
-static struct ir_scancode avertv_303[] = {
- { 0x2a, KEY_1 },
- { 0x32, KEY_2 },
- { 0x3a, KEY_3 },
- { 0x4a, KEY_4 },
- { 0x52, KEY_5 },
- { 0x5a, KEY_6 },
- { 0x6a, KEY_7 },
- { 0x72, KEY_8 },
- { 0x7a, KEY_9 },
- { 0x0e, KEY_0 },
-
- { 0x02, KEY_POWER },
- { 0x22, KEY_VIDEO },
- { 0x42, KEY_AUDIO },
- { 0x62, KEY_ZOOM },
- { 0x0a, KEY_TV },
- { 0x12, KEY_CD },
- { 0x1a, KEY_TEXT },
-
- { 0x16, KEY_SUBTITLE },
- { 0x1e, KEY_REWIND },
- { 0x06, KEY_PRINT },
-
- { 0x2e, KEY_SEARCH },
- { 0x36, KEY_SLEEP },
- { 0x3e, KEY_SHUFFLE },
- { 0x26, KEY_MUTE },
-
- { 0x4e, KEY_RECORD },
- { 0x56, KEY_PAUSE },
- { 0x5e, KEY_STOP },
- { 0x46, KEY_PLAY },
-
- { 0x6e, KEY_RED },
- { 0x0b, KEY_GREEN },
- { 0x66, KEY_YELLOW },
- { 0x03, KEY_BLUE },
-
- { 0x76, KEY_LEFT },
- { 0x7e, KEY_RIGHT },
- { 0x13, KEY_DOWN },
- { 0x1b, KEY_UP },
-};
-
-static struct rc_keymap avertv_303_map = {
- .map = {
- .scan = avertv_303,
- .size = ARRAY_SIZE(avertv_303),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_AVERTV_303,
- }
-};
-
-static int __init init_rc_map_avertv_303(void)
-{
- return ir_register_map(&avertv_303_map);
-}
-
-static void __exit exit_rc_map_avertv_303(void)
-{
- ir_unregister_map(&avertv_303_map);
-}
-
-module_init(init_rc_map_avertv_303)
-module_exit(exit_rc_map_avertv_303)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * TwinHan AzureWave AD-TU700(704J) remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode azurewave_ad_tu700[] = {
- { 0x0000, KEY_TAB }, /* Tab */
- { 0x0001, KEY_2 },
- { 0x0002, KEY_CHANNELDOWN },
- { 0x0003, KEY_1 },
- { 0x0004, KEY_MENU }, /* Record List */
- { 0x0005, KEY_CHANNELUP },
- { 0x0006, KEY_3 },
- { 0x0007, KEY_SLEEP }, /* Hibernate */
- { 0x0008, KEY_VIDEO }, /* A/V */
- { 0x0009, KEY_4 },
- { 0x000a, KEY_VOLUMEDOWN },
- { 0x000c, KEY_CANCEL }, /* Cancel */
- { 0x000d, KEY_7 },
- { 0x000e, KEY_AGAIN }, /* Recall */
- { 0x000f, KEY_TEXT }, /* Teletext */
- { 0x0010, KEY_MUTE },
- { 0x0011, KEY_RECORD },
- { 0x0012, KEY_FASTFORWARD }, /* FF >> */
- { 0x0013, KEY_BACK }, /* Back */
- { 0x0014, KEY_PLAY },
- { 0x0015, KEY_0 },
- { 0x0016, KEY_POWER2 }, /* [red power button] */
- { 0x0017, KEY_FAVORITES }, /* Favorite List */
- { 0x0018, KEY_RED },
- { 0x0019, KEY_8 },
- { 0x001a, KEY_STOP },
- { 0x001b, KEY_9 },
- { 0x001c, KEY_EPG }, /* Info/EPG */
- { 0x001d, KEY_5 },
- { 0x001e, KEY_VOLUMEUP },
- { 0x001f, KEY_6 },
- { 0x0040, KEY_REWIND }, /* FR << */
- { 0x0041, KEY_PREVIOUS }, /* Replay */
- { 0x0042, KEY_NEXT }, /* Skip */
- { 0x0043, KEY_SUBTITLE }, /* Subtitle / CC */
- { 0x0045, KEY_KPPLUS }, /* Zoom+ */
- { 0x0046, KEY_KPMINUS }, /* Zoom- */
- { 0x0047, KEY_NEW }, /* PIP */
- { 0x0048, KEY_INFO }, /* Preview */
- { 0x0049, KEY_MODE }, /* L/R */
- { 0x004a, KEY_CLEAR }, /* Clear */
- { 0x004b, KEY_UP }, /* up arrow */
- { 0x004c, KEY_PAUSE },
- { 0x004d, KEY_ZOOM }, /* Full Screen */
- { 0x004e, KEY_LEFT }, /* left arrow */
- { 0x004f, KEY_OK }, /* Enter / ok */
- { 0x0050, KEY_LANGUAGE }, /* SAP */
- { 0x0051, KEY_DOWN }, /* down arrow */
- { 0x0052, KEY_RIGHT }, /* right arrow */
- { 0x0053, KEY_GREEN },
- { 0x0054, KEY_CAMERA }, /* Capture */
- { 0x005e, KEY_YELLOW },
- { 0x005f, KEY_BLUE },
-};
-
-static struct rc_keymap azurewave_ad_tu700_map = {
- .map = {
- .scan = azurewave_ad_tu700,
- .size = ARRAY_SIZE(azurewave_ad_tu700),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_AZUREWAVE_AD_TU700,
- }
-};
-
-static int __init init_rc_map_azurewave_ad_tu700(void)
-{
- return ir_register_map(&azurewave_ad_tu700_map);
-}
-
-static void __exit exit_rc_map_azurewave_ad_tu700(void)
-{
- ir_unregister_map(&azurewave_ad_tu700_map);
-}
-
-module_init(init_rc_map_azurewave_ad_tu700)
-module_exit(exit_rc_map_azurewave_ad_tu700)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/* behold-columbus.h - Keytable for behold_columbus Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Beholder Intl. Ltd. 2008
- * Dmitry Belimov d.belimov@google.com
- * Keytable is used by BeholdTV Columbus
- * The "ascii-art picture" below (in comments, first row
- * is the keycode in hex, and subsequent row(s) shows
- * the button labels (several variants when appropriate)
- * helps to descide which keycodes to assign to the buttons.
- */
-
-static struct ir_scancode behold_columbus[] = {
-
- /* 0x13 0x11 0x1C 0x12 *
- * Mute Source TV/FM Power *
- * */
-
- { 0x13, KEY_MUTE },
- { 0x11, KEY_PROPS },
- { 0x1C, KEY_TUNER }, /* KEY_TV/KEY_RADIO */
- { 0x12, KEY_POWER },
-
- /* 0x01 0x02 0x03 0x0D *
- * 1 2 3 Stereo *
- * *
- * 0x04 0x05 0x06 0x19 *
- * 4 5 6 Snapshot *
- * *
- * 0x07 0x08 0x09 0x10 *
- * 7 8 9 Zoom *
- * */
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x0D, KEY_SETUP }, /* Setup key */
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x19, KEY_CAMERA }, /* Snapshot key */
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
- { 0x10, KEY_ZOOM },
-
- /* 0x0A 0x00 0x0B 0x0C *
- * RECALL 0 ChannelUp VolumeUp *
- * */
- { 0x0A, KEY_AGAIN },
- { 0x00, KEY_0 },
- { 0x0B, KEY_CHANNELUP },
- { 0x0C, KEY_VOLUMEUP },
-
- /* 0x1B 0x1D 0x15 0x18 *
- * Timeshift Record ChannelDown VolumeDown *
- * */
-
- { 0x1B, KEY_TIME },
- { 0x1D, KEY_RECORD },
- { 0x15, KEY_CHANNELDOWN },
- { 0x18, KEY_VOLUMEDOWN },
-
- /* 0x0E 0x1E 0x0F 0x1A *
- * Stop Pause Previouse Next *
- * */
-
- { 0x0E, KEY_STOP },
- { 0x1E, KEY_PAUSE },
- { 0x0F, KEY_PREVIOUS },
- { 0x1A, KEY_NEXT },
-
-};
-
-static struct rc_keymap behold_columbus_map = {
- .map = {
- .scan = behold_columbus,
- .size = ARRAY_SIZE(behold_columbus),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_BEHOLD_COLUMBUS,
- }
-};
-
-static int __init init_rc_map_behold_columbus(void)
-{
- return ir_register_map(&behold_columbus_map);
-}
-
-static void __exit exit_rc_map_behold_columbus(void)
-{
- ir_unregister_map(&behold_columbus_map);
-}
-
-module_init(init_rc_map_behold_columbus)
-module_exit(exit_rc_map_behold_columbus)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* behold.h - Keytable for behold Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Igor Kuznetsov <igk72@ya.ru>
- * Andrey J. Melnikov <temnota@kmv.ru>
- *
- * Keytable is used by BeholdTV 60x series, M6 series at
- * least, and probably other cards too.
- * The "ascii-art picture" below (in comments, first row
- * is the keycode in hex, and subsequent row(s) shows
- * the button labels (several variants when appropriate)
- * helps to descide which keycodes to assign to the buttons.
- */
-
-static struct ir_scancode behold[] = {
-
- /* 0x1c 0x12 *
- * TV/FM POWER *
- * */
- { 0x1c, KEY_TUNER }, /* XXX KEY_TV / KEY_RADIO */
- { 0x12, KEY_POWER },
-
- /* 0x01 0x02 0x03 *
- * 1 2 3 *
- * *
- * 0x04 0x05 0x06 *
- * 4 5 6 *
- * *
- * 0x07 0x08 0x09 *
- * 7 8 9 *
- * */
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- /* 0x0a 0x00 0x17 *
- * RECALL 0 MODE *
- * */
- { 0x0a, KEY_AGAIN },
- { 0x00, KEY_0 },
- { 0x17, KEY_MODE },
-
- /* 0x14 0x10 *
- * ASPECT FULLSCREEN *
- * */
- { 0x14, KEY_SCREEN },
- { 0x10, KEY_ZOOM },
-
- /* 0x0b *
- * Up *
- * *
- * 0x18 0x16 0x0c *
- * Left Ok Right *
- * *
- * 0x015 *
- * Down *
- * */
- { 0x0b, KEY_CHANNELUP },
- { 0x18, KEY_VOLUMEDOWN },
- { 0x16, KEY_OK }, /* XXX KEY_ENTER */
- { 0x0c, KEY_VOLUMEUP },
- { 0x15, KEY_CHANNELDOWN },
-
- /* 0x11 0x0d *
- * MUTE INFO *
- * */
- { 0x11, KEY_MUTE },
- { 0x0d, KEY_INFO },
-
- /* 0x0f 0x1b 0x1a *
- * RECORD PLAY/PAUSE STOP *
- * *
- * 0x0e 0x1f 0x1e *
- *TELETEXT AUDIO SOURCE *
- * RED YELLOW *
- * */
- { 0x0f, KEY_RECORD },
- { 0x1b, KEY_PLAYPAUSE },
- { 0x1a, KEY_STOP },
- { 0x0e, KEY_TEXT },
- { 0x1f, KEY_RED }, /*XXX KEY_AUDIO */
- { 0x1e, KEY_YELLOW }, /*XXX KEY_SOURCE */
-
- /* 0x1d 0x13 0x19 *
- * SLEEP PREVIEW DVB *
- * GREEN BLUE *
- * */
- { 0x1d, KEY_SLEEP },
- { 0x13, KEY_GREEN },
- { 0x19, KEY_BLUE }, /* XXX KEY_SAT */
-
- /* 0x58 0x5c *
- * FREEZE SNAPSHOT *
- * */
- { 0x58, KEY_SLOW },
- { 0x5c, KEY_CAMERA },
-
-};
-
-static struct rc_keymap behold_map = {
- .map = {
- .scan = behold,
- .size = ARRAY_SIZE(behold),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_BEHOLD,
- }
-};
-
-static int __init init_rc_map_behold(void)
-{
- return ir_register_map(&behold_map);
-}
-
-static void __exit exit_rc_map_behold(void)
-{
- ir_unregister_map(&behold_map);
-}
-
-module_init(init_rc_map_behold)
-module_exit(exit_rc_map_behold)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* budget-ci-old.h - Keytable for budget_ci_old Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* From reading the following remotes:
- * Zenith Universal 7 / TV Mode 807 / VCR Mode 837
- * Hauppauge (from NOVA-CI-s box product)
- * This is a "middle of the road" approach, differences are noted
- */
-
-static struct ir_scancode budget_ci_old[] = {
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
- { 0x0a, KEY_ENTER },
- { 0x0b, KEY_RED },
- { 0x0c, KEY_POWER }, /* RADIO on Hauppauge */
- { 0x0d, KEY_MUTE },
- { 0x0f, KEY_A }, /* TV on Hauppauge */
- { 0x10, KEY_VOLUMEUP },
- { 0x11, KEY_VOLUMEDOWN },
- { 0x14, KEY_B },
- { 0x1c, KEY_UP },
- { 0x1d, KEY_DOWN },
- { 0x1e, KEY_OPTION }, /* RESERVED on Hauppauge */
- { 0x1f, KEY_BREAK },
- { 0x20, KEY_CHANNELUP },
- { 0x21, KEY_CHANNELDOWN },
- { 0x22, KEY_PREVIOUS }, /* Prev Ch on Zenith, SOURCE on Hauppauge */
- { 0x24, KEY_RESTART },
- { 0x25, KEY_OK },
- { 0x26, KEY_CYCLEWINDOWS }, /* MINIMIZE on Hauppauge */
- { 0x28, KEY_ENTER }, /* VCR mode on Zenith */
- { 0x29, KEY_PAUSE },
- { 0x2b, KEY_RIGHT },
- { 0x2c, KEY_LEFT },
- { 0x2e, KEY_MENU }, /* FULL SCREEN on Hauppauge */
- { 0x30, KEY_SLOW },
- { 0x31, KEY_PREVIOUS }, /* VCR mode on Zenith */
- { 0x32, KEY_REWIND },
- { 0x34, KEY_FASTFORWARD },
- { 0x35, KEY_PLAY },
- { 0x36, KEY_STOP },
- { 0x37, KEY_RECORD },
- { 0x38, KEY_TUNER }, /* TV/VCR on Zenith */
- { 0x3a, KEY_C },
- { 0x3c, KEY_EXIT },
- { 0x3d, KEY_POWER2 },
- { 0x3e, KEY_TUNER },
-};
-
-static struct rc_keymap budget_ci_old_map = {
- .map = {
- .scan = budget_ci_old,
- .size = ARRAY_SIZE(budget_ci_old),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_BUDGET_CI_OLD,
- }
-};
-
-static int __init init_rc_map_budget_ci_old(void)
-{
- return ir_register_map(&budget_ci_old_map);
-}
-
-static void __exit exit_rc_map_budget_ci_old(void)
-{
- ir_unregister_map(&budget_ci_old_map);
-}
-
-module_init(init_rc_map_budget_ci_old)
-module_exit(exit_rc_map_budget_ci_old)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* cinergy-1400.h - Keytable for cinergy_1400 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Cinergy 1400 DVB-T */
-
-static struct ir_scancode cinergy_1400[] = {
- { 0x01, KEY_POWER },
- { 0x02, KEY_1 },
- { 0x03, KEY_2 },
- { 0x04, KEY_3 },
- { 0x05, KEY_4 },
- { 0x06, KEY_5 },
- { 0x07, KEY_6 },
- { 0x08, KEY_7 },
- { 0x09, KEY_8 },
- { 0x0a, KEY_9 },
- { 0x0c, KEY_0 },
-
- { 0x0b, KEY_VIDEO },
- { 0x0d, KEY_REFRESH },
- { 0x0e, KEY_SELECT },
- { 0x0f, KEY_EPG },
- { 0x10, KEY_UP },
- { 0x11, KEY_LEFT },
- { 0x12, KEY_OK },
- { 0x13, KEY_RIGHT },
- { 0x14, KEY_DOWN },
- { 0x15, KEY_TEXT },
- { 0x16, KEY_INFO },
-
- { 0x17, KEY_RED },
- { 0x18, KEY_GREEN },
- { 0x19, KEY_YELLOW },
- { 0x1a, KEY_BLUE },
-
- { 0x1b, KEY_CHANNELUP },
- { 0x1c, KEY_VOLUMEUP },
- { 0x1d, KEY_MUTE },
- { 0x1e, KEY_VOLUMEDOWN },
- { 0x1f, KEY_CHANNELDOWN },
-
- { 0x40, KEY_PAUSE },
- { 0x4c, KEY_PLAY },
- { 0x58, KEY_RECORD },
- { 0x54, KEY_PREVIOUS },
- { 0x48, KEY_STOP },
- { 0x5c, KEY_NEXT },
-};
-
-static struct rc_keymap cinergy_1400_map = {
- .map = {
- .scan = cinergy_1400,
- .size = ARRAY_SIZE(cinergy_1400),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_CINERGY_1400,
- }
-};
-
-static int __init init_rc_map_cinergy_1400(void)
-{
- return ir_register_map(&cinergy_1400_map);
-}
-
-static void __exit exit_rc_map_cinergy_1400(void)
-{
- ir_unregister_map(&cinergy_1400_map);
-}
-
-module_init(init_rc_map_cinergy_1400)
-module_exit(exit_rc_map_cinergy_1400)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* cinergy.h - Keytable for cinergy Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode cinergy[] = {
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- { 0x0a, KEY_POWER },
- { 0x0b, KEY_PROG1 }, /* app */
- { 0x0c, KEY_ZOOM }, /* zoom/fullscreen */
- { 0x0d, KEY_CHANNELUP }, /* channel */
- { 0x0e, KEY_CHANNELDOWN }, /* channel- */
- { 0x0f, KEY_VOLUMEUP },
- { 0x10, KEY_VOLUMEDOWN },
- { 0x11, KEY_TUNER }, /* AV */
- { 0x12, KEY_NUMLOCK }, /* -/-- */
- { 0x13, KEY_AUDIO }, /* audio */
- { 0x14, KEY_MUTE },
- { 0x15, KEY_UP },
- { 0x16, KEY_DOWN },
- { 0x17, KEY_LEFT },
- { 0x18, KEY_RIGHT },
- { 0x19, BTN_LEFT, },
- { 0x1a, BTN_RIGHT, },
- { 0x1b, KEY_WWW }, /* text */
- { 0x1c, KEY_REWIND },
- { 0x1d, KEY_FORWARD },
- { 0x1e, KEY_RECORD },
- { 0x1f, KEY_PLAY },
- { 0x20, KEY_PREVIOUSSONG },
- { 0x21, KEY_NEXTSONG },
- { 0x22, KEY_PAUSE },
- { 0x23, KEY_STOP },
-};
-
-static struct rc_keymap cinergy_map = {
- .map = {
- .scan = cinergy,
- .size = ARRAY_SIZE(cinergy),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_CINERGY,
- }
-};
-
-static int __init init_rc_map_cinergy(void)
-{
- return ir_register_map(&cinergy_map);
-}
-
-static void __exit exit_rc_map_cinergy(void)
-{
- ir_unregister_map(&cinergy_map);
-}
-
-module_init(init_rc_map_cinergy)
-module_exit(exit_rc_map_cinergy)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* rc-dvb0700-big.c - Keytable for devices in dvb0700
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * TODO: This table is a real mess, as it merges RC codes from several
- * devices into a big table. It also has both RC-5 and NEC codes inside.
- * It should be broken into small tables, and the protocols should properly
- * be indentificated.
- *
- * The table were imported from dib0700_devices.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode dib0700_nec_table[] = {
- /* Key codes for the Pixelview SBTVD remote */
- { 0x8613, KEY_MUTE },
- { 0x8612, KEY_POWER },
- { 0x8601, KEY_1 },
- { 0x8602, KEY_2 },
- { 0x8603, KEY_3 },
- { 0x8604, KEY_4 },
- { 0x8605, KEY_5 },
- { 0x8606, KEY_6 },
- { 0x8607, KEY_7 },
- { 0x8608, KEY_8 },
- { 0x8609, KEY_9 },
- { 0x8600, KEY_0 },
- { 0x860d, KEY_CHANNELUP },
- { 0x8619, KEY_CHANNELDOWN },
- { 0x8610, KEY_VOLUMEUP },
- { 0x860c, KEY_VOLUMEDOWN },
-
- { 0x860a, KEY_CAMERA },
- { 0x860b, KEY_ZOOM },
- { 0x861b, KEY_BACKSPACE },
- { 0x8615, KEY_ENTER },
-
- { 0x861d, KEY_UP },
- { 0x861e, KEY_DOWN },
- { 0x860e, KEY_LEFT },
- { 0x860f, KEY_RIGHT },
-
- { 0x8618, KEY_RECORD },
- { 0x861a, KEY_STOP },
-
- /* Key codes for the EvolutePC TVWay+ remote */
- { 0x7a00, KEY_MENU },
- { 0x7a01, KEY_RECORD },
- { 0x7a02, KEY_PLAY },
- { 0x7a03, KEY_STOP },
- { 0x7a10, KEY_CHANNELUP },
- { 0x7a11, KEY_CHANNELDOWN },
- { 0x7a12, KEY_VOLUMEUP },
- { 0x7a13, KEY_VOLUMEDOWN },
- { 0x7a40, KEY_POWER },
- { 0x7a41, KEY_MUTE },
-
- /* Key codes for the Elgato EyeTV Diversity silver remote */
- { 0x4501, KEY_POWER },
- { 0x4502, KEY_MUTE },
- { 0x4503, KEY_1 },
- { 0x4504, KEY_2 },
- { 0x4505, KEY_3 },
- { 0x4506, KEY_4 },
- { 0x4507, KEY_5 },
- { 0x4508, KEY_6 },
- { 0x4509, KEY_7 },
- { 0x450a, KEY_8 },
- { 0x450b, KEY_9 },
- { 0x450c, KEY_LAST },
- { 0x450d, KEY_0 },
- { 0x450e, KEY_ENTER },
- { 0x450f, KEY_RED },
- { 0x4510, KEY_CHANNELUP },
- { 0x4511, KEY_GREEN },
- { 0x4512, KEY_VOLUMEDOWN },
- { 0x4513, KEY_OK },
- { 0x4514, KEY_VOLUMEUP },
- { 0x4515, KEY_YELLOW },
- { 0x4516, KEY_CHANNELDOWN },
- { 0x4517, KEY_BLUE },
- { 0x4518, KEY_LEFT }, /* Skip backwards */
- { 0x4519, KEY_PLAYPAUSE },
- { 0x451a, KEY_RIGHT }, /* Skip forward */
- { 0x451b, KEY_REWIND },
- { 0x451c, KEY_L }, /* Live */
- { 0x451d, KEY_FASTFORWARD },
- { 0x451e, KEY_STOP }, /* 'Reveal' for Teletext */
- { 0x451f, KEY_MENU }, /* KEY_TEXT for Teletext */
- { 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */
- { 0x4541, KEY_SCREEN }, /* Full screen toggle, 'Hold' for Teletext */
- { 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
-};
-
-static struct rc_keymap dib0700_nec_map = {
- .map = {
- .scan = dib0700_nec_table,
- .size = ARRAY_SIZE(dib0700_nec_table),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_DIB0700_NEC_TABLE,
- }
-};
-
-static int __init init_rc_map(void)
-{
- return ir_register_map(&dib0700_nec_map);
-}
-
-static void __exit exit_rc_map(void)
-{
- ir_unregister_map(&dib0700_nec_map);
-}
-
-module_init(init_rc_map)
-module_exit(exit_rc_map)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* rc-dvb0700-big.c - Keytable for devices in dvb0700
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * TODO: This table is a real mess, as it merges RC codes from several
- * devices into a big table. It also has both RC-5 and NEC codes inside.
- * It should be broken into small tables, and the protocols should properly
- * be indentificated.
- *
- * The table were imported from dib0700_devices.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode dib0700_rc5_table[] = {
- /* Key codes for the tiny Pinnacle remote*/
- { 0x0700, KEY_MUTE },
- { 0x0701, KEY_MENU }, /* Pinnacle logo */
- { 0x0739, KEY_POWER },
- { 0x0703, KEY_VOLUMEUP },
- { 0x0709, KEY_VOLUMEDOWN },
- { 0x0706, KEY_CHANNELUP },
- { 0x070c, KEY_CHANNELDOWN },
- { 0x070f, KEY_1 },
- { 0x0715, KEY_2 },
- { 0x0710, KEY_3 },
- { 0x0718, KEY_4 },
- { 0x071b, KEY_5 },
- { 0x071e, KEY_6 },
- { 0x0711, KEY_7 },
- { 0x0721, KEY_8 },
- { 0x0712, KEY_9 },
- { 0x0727, KEY_0 },
- { 0x0724, KEY_SCREEN }, /* 'Square' key */
- { 0x072a, KEY_TEXT }, /* 'T' key */
- { 0x072d, KEY_REWIND },
- { 0x0730, KEY_PLAY },
- { 0x0733, KEY_FASTFORWARD },
- { 0x0736, KEY_RECORD },
- { 0x073c, KEY_STOP },
- { 0x073f, KEY_CANCEL }, /* '?' key */
-
- /* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
- { 0xeb01, KEY_POWER },
- { 0xeb02, KEY_1 },
- { 0xeb03, KEY_2 },
- { 0xeb04, KEY_3 },
- { 0xeb05, KEY_4 },
- { 0xeb06, KEY_5 },
- { 0xeb07, KEY_6 },
- { 0xeb08, KEY_7 },
- { 0xeb09, KEY_8 },
- { 0xeb0a, KEY_9 },
- { 0xeb0b, KEY_VIDEO },
- { 0xeb0c, KEY_0 },
- { 0xeb0d, KEY_REFRESH },
- { 0xeb0f, KEY_EPG },
- { 0xeb10, KEY_UP },
- { 0xeb11, KEY_LEFT },
- { 0xeb12, KEY_OK },
- { 0xeb13, KEY_RIGHT },
- { 0xeb14, KEY_DOWN },
- { 0xeb16, KEY_INFO },
- { 0xeb17, KEY_RED },
- { 0xeb18, KEY_GREEN },
- { 0xeb19, KEY_YELLOW },
- { 0xeb1a, KEY_BLUE },
- { 0xeb1b, KEY_CHANNELUP },
- { 0xeb1c, KEY_VOLUMEUP },
- { 0xeb1d, KEY_MUTE },
- { 0xeb1e, KEY_VOLUMEDOWN },
- { 0xeb1f, KEY_CHANNELDOWN },
- { 0xeb40, KEY_PAUSE },
- { 0xeb41, KEY_HOME },
- { 0xeb42, KEY_MENU }, /* DVD Menu */
- { 0xeb43, KEY_SUBTITLE },
- { 0xeb44, KEY_TEXT }, /* Teletext */
- { 0xeb45, KEY_DELETE },
- { 0xeb46, KEY_TV },
- { 0xeb47, KEY_DVD },
- { 0xeb48, KEY_STOP },
- { 0xeb49, KEY_VIDEO },
- { 0xeb4a, KEY_AUDIO }, /* Music */
- { 0xeb4b, KEY_SCREEN }, /* Pic */
- { 0xeb4c, KEY_PLAY },
- { 0xeb4d, KEY_BACK },
- { 0xeb4e, KEY_REWIND },
- { 0xeb4f, KEY_FASTFORWARD },
- { 0xeb54, KEY_PREVIOUS },
- { 0xeb58, KEY_RECORD },
- { 0xeb5c, KEY_NEXT },
-
- /* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
- { 0x1e00, KEY_0 },
- { 0x1e01, KEY_1 },
- { 0x1e02, KEY_2 },
- { 0x1e03, KEY_3 },
- { 0x1e04, KEY_4 },
- { 0x1e05, KEY_5 },
- { 0x1e06, KEY_6 },
- { 0x1e07, KEY_7 },
- { 0x1e08, KEY_8 },
- { 0x1e09, KEY_9 },
- { 0x1e0a, KEY_KPASTERISK },
- { 0x1e0b, KEY_RED },
- { 0x1e0c, KEY_RADIO },
- { 0x1e0d, KEY_MENU },
- { 0x1e0e, KEY_GRAVE }, /* # */
- { 0x1e0f, KEY_MUTE },
- { 0x1e10, KEY_VOLUMEUP },
- { 0x1e11, KEY_VOLUMEDOWN },
- { 0x1e12, KEY_CHANNEL },
- { 0x1e14, KEY_UP },
- { 0x1e15, KEY_DOWN },
- { 0x1e16, KEY_LEFT },
- { 0x1e17, KEY_RIGHT },
- { 0x1e18, KEY_VIDEO },
- { 0x1e19, KEY_AUDIO },
- { 0x1e1a, KEY_MEDIA },
- { 0x1e1b, KEY_EPG },
- { 0x1e1c, KEY_TV },
- { 0x1e1e, KEY_NEXT },
- { 0x1e1f, KEY_BACK },
- { 0x1e20, KEY_CHANNELUP },
- { 0x1e21, KEY_CHANNELDOWN },
- { 0x1e24, KEY_LAST }, /* Skip backwards */
- { 0x1e25, KEY_OK },
- { 0x1e29, KEY_BLUE},
- { 0x1e2e, KEY_GREEN },
- { 0x1e30, KEY_PAUSE },
- { 0x1e32, KEY_REWIND },
- { 0x1e34, KEY_FASTFORWARD },
- { 0x1e35, KEY_PLAY },
- { 0x1e36, KEY_STOP },
- { 0x1e37, KEY_RECORD },
- { 0x1e38, KEY_YELLOW },
- { 0x1e3b, KEY_GOTO },
- { 0x1e3d, KEY_POWER },
-
- /* Key codes for the Leadtek Winfast DTV Dongle */
- { 0x0042, KEY_POWER },
- { 0x077c, KEY_TUNER },
- { 0x0f4e, KEY_PRINT }, /* PREVIEW */
- { 0x0840, KEY_SCREEN }, /* full screen toggle*/
- { 0x0f71, KEY_DOT }, /* frequency */
- { 0x0743, KEY_0 },
- { 0x0c41, KEY_1 },
- { 0x0443, KEY_2 },
- { 0x0b7f, KEY_3 },
- { 0x0e41, KEY_4 },
- { 0x0643, KEY_5 },
- { 0x097f, KEY_6 },
- { 0x0d7e, KEY_7 },
- { 0x057c, KEY_8 },
- { 0x0a40, KEY_9 },
- { 0x0e4e, KEY_CLEAR },
- { 0x047c, KEY_CHANNEL }, /* show channel number */
- { 0x0f41, KEY_LAST }, /* recall */
- { 0x0342, KEY_MUTE },
- { 0x064c, KEY_RESERVED }, /* PIP button*/
- { 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */
- { 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
- { 0x0b70, KEY_RECORD },
- { 0x037d, KEY_VOLUMEUP },
- { 0x017d, KEY_VOLUMEDOWN },
- { 0x0242, KEY_CHANNELUP },
- { 0x007d, KEY_CHANNELDOWN },
-
- /* Key codes for Nova-TD "credit card" remote control. */
- { 0x1d00, KEY_0 },
- { 0x1d01, KEY_1 },
- { 0x1d02, KEY_2 },
- { 0x1d03, KEY_3 },
- { 0x1d04, KEY_4 },
- { 0x1d05, KEY_5 },
- { 0x1d06, KEY_6 },
- { 0x1d07, KEY_7 },
- { 0x1d08, KEY_8 },
- { 0x1d09, KEY_9 },
- { 0x1d0a, KEY_TEXT },
- { 0x1d0d, KEY_MENU },
- { 0x1d0f, KEY_MUTE },
- { 0x1d10, KEY_VOLUMEUP },
- { 0x1d11, KEY_VOLUMEDOWN },
- { 0x1d12, KEY_CHANNEL },
- { 0x1d14, KEY_UP },
- { 0x1d15, KEY_DOWN },
- { 0x1d16, KEY_LEFT },
- { 0x1d17, KEY_RIGHT },
- { 0x1d1c, KEY_TV },
- { 0x1d1e, KEY_NEXT },
- { 0x1d1f, KEY_BACK },
- { 0x1d20, KEY_CHANNELUP },
- { 0x1d21, KEY_CHANNELDOWN },
- { 0x1d24, KEY_LAST },
- { 0x1d25, KEY_OK },
- { 0x1d30, KEY_PAUSE },
- { 0x1d32, KEY_REWIND },
- { 0x1d34, KEY_FASTFORWARD },
- { 0x1d35, KEY_PLAY },
- { 0x1d36, KEY_STOP },
- { 0x1d37, KEY_RECORD },
- { 0x1d3b, KEY_GOTO },
- { 0x1d3d, KEY_POWER },
-};
-
-static struct rc_keymap dib0700_rc5_map = {
- .map = {
- .scan = dib0700_rc5_table,
- .size = ARRAY_SIZE(dib0700_rc5_table),
- .ir_type = IR_TYPE_RC5,
- .name = RC_MAP_DIB0700_RC5_TABLE,
- }
-};
-
-static int __init init_rc_map(void)
-{
- return ir_register_map(&dib0700_rc5_map);
-}
-
-static void __exit exit_rc_map(void)
-{
- ir_unregister_map(&dib0700_rc5_map);
-}
-
-module_init(init_rc_map)
-module_exit(exit_rc_map)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * DigitalNow TinyTwin remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode digitalnow_tinytwin[] = {
- { 0x0000, KEY_MUTE }, /* [symbol speaker] */
- { 0x0001, KEY_VOLUMEUP },
- { 0x0002, KEY_POWER2 }, /* TV [power button] */
- { 0x0003, KEY_2 },
- { 0x0004, KEY_3 },
- { 0x0005, KEY_4 },
- { 0x0006, KEY_6 },
- { 0x0007, KEY_7 },
- { 0x0008, KEY_8 },
- { 0x0009, KEY_NUMERIC_STAR }, /* [*] */
- { 0x000a, KEY_0 },
- { 0x000b, KEY_NUMERIC_POUND }, /* [#] */
- { 0x000c, KEY_RIGHT }, /* [right arrow] */
- { 0x000d, KEY_HOMEPAGE }, /* [symbol home] Start */
- { 0x000e, KEY_RED }, /* [red] Videos */
- { 0x0010, KEY_POWER }, /* PC [power button] */
- { 0x0011, KEY_YELLOW }, /* [yellow] Pictures */
- { 0x0012, KEY_DOWN }, /* [down arrow] */
- { 0x0013, KEY_GREEN }, /* [green] Music */
- { 0x0014, KEY_CYCLEWINDOWS }, /* BACK */
- { 0x0015, KEY_FAVORITES }, /* MORE */
- { 0x0016, KEY_UP }, /* [up arrow] */
- { 0x0017, KEY_LEFT }, /* [left arrow] */
- { 0x0018, KEY_OK }, /* OK */
- { 0x0019, KEY_BLUE }, /* [blue] MyTV */
- { 0x001a, KEY_REWIND }, /* REW [<<] */
- { 0x001b, KEY_PLAY }, /* PLAY */
- { 0x001c, KEY_5 },
- { 0x001d, KEY_9 },
- { 0x001e, KEY_VOLUMEDOWN },
- { 0x001f, KEY_1 },
- { 0x0040, KEY_STOP }, /* STOP */
- { 0x0042, KEY_PAUSE }, /* PAUSE */
- { 0x0043, KEY_SCREEN }, /* Aspect */
- { 0x0044, KEY_FORWARD }, /* FWD [>>] */
- { 0x0045, KEY_NEXT }, /* SKIP */
- { 0x0048, KEY_RECORD }, /* RECORD */
- { 0x0049, KEY_VIDEO }, /* RTV */
- { 0x004a, KEY_EPG }, /* Guide */
- { 0x004b, KEY_CHANNELUP },
- { 0x004c, KEY_HELP }, /* Help */
- { 0x004d, KEY_RADIO }, /* Radio */
- { 0x004f, KEY_CHANNELDOWN },
- { 0x0050, KEY_DVD }, /* DVD */
- { 0x0051, KEY_AUDIO }, /* Audio */
- { 0x0052, KEY_TITLE }, /* Title */
- { 0x0053, KEY_NEW }, /* [symbol PIP?] */
- { 0x0057, KEY_MENU }, /* Mouse */
- { 0x005a, KEY_PREVIOUS }, /* REPLAY */
-};
-
-static struct rc_keymap digitalnow_tinytwin_map = {
- .map = {
- .scan = digitalnow_tinytwin,
- .size = ARRAY_SIZE(digitalnow_tinytwin),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_DIGITALNOW_TINYTWIN,
- }
-};
-
-static int __init init_rc_map_digitalnow_tinytwin(void)
-{
- return ir_register_map(&digitalnow_tinytwin_map);
-}
-
-static void __exit exit_rc_map_digitalnow_tinytwin(void)
-{
- ir_unregister_map(&digitalnow_tinytwin_map);
-}
-
-module_init(init_rc_map_digitalnow_tinytwin)
-module_exit(exit_rc_map_digitalnow_tinytwin)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/*
- * Digittrade DVB-T USB Stick remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* Digittrade DVB-T USB Stick remote controller. */
-/* Imported from af9015.h.
- Initial keytable was from Alain Kalker <miki@dds.nl> */
-
-/* Digittrade DVB-T USB Stick */
-static struct ir_scancode digittrade[] = {
- { 0x0000, KEY_9 },
- { 0x0001, KEY_EPG }, /* EPG */
- { 0x0002, KEY_VOLUMEDOWN }, /* Vol Dn */
- { 0x0003, KEY_TEXT }, /* TELETEXT */
- { 0x0004, KEY_8 },
- { 0x0005, KEY_MUTE }, /* MUTE */
- { 0x0006, KEY_POWER2 }, /* POWER */
- { 0x0009, KEY_ZOOM }, /* FULLSCREEN */
- { 0x000a, KEY_RECORD }, /* RECORD */
- { 0x000d, KEY_SUBTITLE }, /* SUBTITLE */
- { 0x000e, KEY_STOP }, /* STOP */
- { 0x0010, KEY_OK }, /* RETURN */
- { 0x0011, KEY_2 },
- { 0x0012, KEY_4 },
- { 0x0015, KEY_3 },
- { 0x0016, KEY_5 },
- { 0x0017, KEY_CHANNELDOWN }, /* Ch Dn */
- { 0x0019, KEY_CHANNELUP }, /* CH Up */
- { 0x001a, KEY_PAUSE }, /* PAUSE */
- { 0x001b, KEY_1 },
- { 0x001d, KEY_AUDIO }, /* DUAL SOUND */
- { 0x001e, KEY_PLAY }, /* PLAY */
- { 0x001f, KEY_CAMERA }, /* SNAPSHOT */
- { 0x0040, KEY_VOLUMEUP }, /* Vol Up */
- { 0x0048, KEY_7 },
- { 0x004c, KEY_6 },
- { 0x004d, KEY_PLAYPAUSE }, /* TIMESHIFT */
- { 0x0054, KEY_0 },
-};
-
-static struct rc_keymap digittrade_map = {
- .map = {
- .scan = digittrade,
- .size = ARRAY_SIZE(digittrade),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_DIGITTRADE,
- }
-};
-
-static int __init init_rc_map_digittrade(void)
-{
- return ir_register_map(&digittrade_map);
-}
-
-static void __exit exit_rc_map_digittrade(void)
-{
- ir_unregister_map(&digittrade_map);
-}
-
-module_init(init_rc_map_digittrade)
-module_exit(exit_rc_map_digittrade)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/* dm1105-nec.h - Keytable for dm1105_nec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* DVBWorld remotes
- Igor M. Liplianin <liplianin@me.by>
- */
-
-static struct ir_scancode dm1105_nec[] = {
- { 0x0a, KEY_POWER2}, /* power */
- { 0x0c, KEY_MUTE}, /* mute */
- { 0x11, KEY_1},
- { 0x12, KEY_2},
- { 0x13, KEY_3},
- { 0x14, KEY_4},
- { 0x15, KEY_5},
- { 0x16, KEY_6},
- { 0x17, KEY_7},
- { 0x18, KEY_8},
- { 0x19, KEY_9},
- { 0x10, KEY_0},
- { 0x1c, KEY_CHANNELUP}, /* ch+ */
- { 0x0f, KEY_CHANNELDOWN}, /* ch- */
- { 0x1a, KEY_VOLUMEUP}, /* vol+ */
- { 0x0e, KEY_VOLUMEDOWN}, /* vol- */
- { 0x04, KEY_RECORD}, /* rec */
- { 0x09, KEY_CHANNEL}, /* fav */
- { 0x08, KEY_BACKSPACE}, /* rewind */
- { 0x07, KEY_FASTFORWARD}, /* fast */
- { 0x0b, KEY_PAUSE}, /* pause */
- { 0x02, KEY_ESC}, /* cancel */
- { 0x03, KEY_TAB}, /* tab */
- { 0x00, KEY_UP}, /* up */
- { 0x1f, KEY_ENTER}, /* ok */
- { 0x01, KEY_DOWN}, /* down */
- { 0x05, KEY_RECORD}, /* cap */
- { 0x06, KEY_STOP}, /* stop */
- { 0x40, KEY_ZOOM}, /* full */
- { 0x1e, KEY_TV}, /* tvmode */
- { 0x1b, KEY_B}, /* recall */
-};
-
-static struct rc_keymap dm1105_nec_map = {
- .map = {
- .scan = dm1105_nec,
- .size = ARRAY_SIZE(dm1105_nec),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_DM1105_NEC,
- }
-};
-
-static int __init init_rc_map_dm1105_nec(void)
-{
- return ir_register_map(&dm1105_nec_map);
-}
-
-static void __exit exit_rc_map_dm1105_nec(void)
-{
- ir_unregister_map(&dm1105_nec_map);
-}
-
-module_init(init_rc_map_dm1105_nec)
-module_exit(exit_rc_map_dm1105_nec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* dntv-live-dvb-t.h - Keytable for dntv_live_dvb_t Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* DigitalNow DNTV Live DVB-T Remote */
-
-static struct ir_scancode dntv_live_dvb_t[] = {
- { 0x00, KEY_ESC }, /* 'go up a level?' */
- /* Keys 0 to 9 */
- { 0x0a, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- { 0x0b, KEY_TUNER }, /* tv/fm */
- { 0x0c, KEY_SEARCH }, /* scan */
- { 0x0d, KEY_STOP },
- { 0x0e, KEY_PAUSE },
- { 0x0f, KEY_LIST }, /* source */
-
- { 0x10, KEY_MUTE },
- { 0x11, KEY_REWIND }, /* backward << */
- { 0x12, KEY_POWER },
- { 0x13, KEY_CAMERA }, /* snap */
- { 0x14, KEY_AUDIO }, /* stereo */
- { 0x15, KEY_CLEAR }, /* reset */
- { 0x16, KEY_PLAY },
- { 0x17, KEY_ENTER },
- { 0x18, KEY_ZOOM }, /* full screen */
- { 0x19, KEY_FASTFORWARD }, /* forward >> */
- { 0x1a, KEY_CHANNELUP },
- { 0x1b, KEY_VOLUMEUP },
- { 0x1c, KEY_INFO }, /* preview */
- { 0x1d, KEY_RECORD }, /* record */
- { 0x1e, KEY_CHANNELDOWN },
- { 0x1f, KEY_VOLUMEDOWN },
-};
-
-static struct rc_keymap dntv_live_dvb_t_map = {
- .map = {
- .scan = dntv_live_dvb_t,
- .size = ARRAY_SIZE(dntv_live_dvb_t),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_DNTV_LIVE_DVB_T,
- }
-};
-
-static int __init init_rc_map_dntv_live_dvb_t(void)
-{
- return ir_register_map(&dntv_live_dvb_t_map);
-}
-
-static void __exit exit_rc_map_dntv_live_dvb_t(void)
-{
- ir_unregister_map(&dntv_live_dvb_t_map);
-}
-
-module_init(init_rc_map_dntv_live_dvb_t)
-module_exit(exit_rc_map_dntv_live_dvb_t)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* dntv-live-dvbt-pro.h - Keytable for dntv_live_dvbt_pro Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* DigitalNow DNTV Live! DVB-T Pro Remote */
-
-static struct ir_scancode dntv_live_dvbt_pro[] = {
- { 0x16, KEY_POWER },
- { 0x5b, KEY_HOME },
-
- { 0x55, KEY_TV }, /* live tv */
- { 0x58, KEY_TUNER }, /* digital Radio */
- { 0x5a, KEY_RADIO }, /* FM radio */
- { 0x59, KEY_DVD }, /* dvd menu */
- { 0x03, KEY_1 },
- { 0x01, KEY_2 },
- { 0x06, KEY_3 },
- { 0x09, KEY_4 },
- { 0x1d, KEY_5 },
- { 0x1f, KEY_6 },
- { 0x0d, KEY_7 },
- { 0x19, KEY_8 },
- { 0x1b, KEY_9 },
- { 0x0c, KEY_CANCEL },
- { 0x15, KEY_0 },
- { 0x4a, KEY_CLEAR },
- { 0x13, KEY_BACK },
- { 0x00, KEY_TAB },
- { 0x4b, KEY_UP },
- { 0x4e, KEY_LEFT },
- { 0x4f, KEY_OK },
- { 0x52, KEY_RIGHT },
- { 0x51, KEY_DOWN },
- { 0x1e, KEY_VOLUMEUP },
- { 0x0a, KEY_VOLUMEDOWN },
- { 0x02, KEY_CHANNELDOWN },
- { 0x05, KEY_CHANNELUP },
- { 0x11, KEY_RECORD },
- { 0x14, KEY_PLAY },
- { 0x4c, KEY_PAUSE },
- { 0x1a, KEY_STOP },
- { 0x40, KEY_REWIND },
- { 0x12, KEY_FASTFORWARD },
- { 0x41, KEY_PREVIOUSSONG }, /* replay |< */
- { 0x42, KEY_NEXTSONG }, /* skip >| */
- { 0x54, KEY_CAMERA }, /* capture */
- { 0x50, KEY_LANGUAGE }, /* sap */
- { 0x47, KEY_TV2 }, /* pip */
- { 0x4d, KEY_SCREEN },
- { 0x43, KEY_SUBTITLE },
- { 0x10, KEY_MUTE },
- { 0x49, KEY_AUDIO }, /* l/r */
- { 0x07, KEY_SLEEP },
- { 0x08, KEY_VIDEO }, /* a/v */
- { 0x0e, KEY_PREVIOUS }, /* recall */
- { 0x45, KEY_ZOOM }, /* zoom + */
- { 0x46, KEY_ANGLE }, /* zoom - */
- { 0x56, KEY_RED },
- { 0x57, KEY_GREEN },
- { 0x5c, KEY_YELLOW },
- { 0x5d, KEY_BLUE },
-};
-
-static struct rc_keymap dntv_live_dvbt_pro_map = {
- .map = {
- .scan = dntv_live_dvbt_pro,
- .size = ARRAY_SIZE(dntv_live_dvbt_pro),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_DNTV_LIVE_DVBT_PRO,
- }
-};
-
-static int __init init_rc_map_dntv_live_dvbt_pro(void)
-{
- return ir_register_map(&dntv_live_dvbt_pro_map);
-}
-
-static void __exit exit_rc_map_dntv_live_dvbt_pro(void)
-{
- ir_unregister_map(&dntv_live_dvbt_pro_map);
-}
-
-module_init(init_rc_map_dntv_live_dvbt_pro)
-module_exit(exit_rc_map_dntv_live_dvbt_pro)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* em-terratec.h - Keytable for em_terratec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode em_terratec[] = {
- { 0x01, KEY_CHANNEL },
- { 0x02, KEY_SELECT },
- { 0x03, KEY_MUTE },
- { 0x04, KEY_POWER },
- { 0x05, KEY_1 },
- { 0x06, KEY_2 },
- { 0x07, KEY_3 },
- { 0x08, KEY_CHANNELUP },
- { 0x09, KEY_4 },
- { 0x0a, KEY_5 },
- { 0x0b, KEY_6 },
- { 0x0c, KEY_CHANNELDOWN },
- { 0x0d, KEY_7 },
- { 0x0e, KEY_8 },
- { 0x0f, KEY_9 },
- { 0x10, KEY_VOLUMEUP },
- { 0x11, KEY_0 },
- { 0x12, KEY_MENU },
- { 0x13, KEY_PRINT },
- { 0x14, KEY_VOLUMEDOWN },
- { 0x16, KEY_PAUSE },
- { 0x18, KEY_RECORD },
- { 0x19, KEY_REWIND },
- { 0x1a, KEY_PLAY },
- { 0x1b, KEY_FORWARD },
- { 0x1c, KEY_BACKSPACE },
- { 0x1e, KEY_STOP },
- { 0x40, KEY_ZOOM },
-};
-
-static struct rc_keymap em_terratec_map = {
- .map = {
- .scan = em_terratec,
- .size = ARRAY_SIZE(em_terratec),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_EM_TERRATEC,
- }
-};
-
-static int __init init_rc_map_em_terratec(void)
-{
- return ir_register_map(&em_terratec_map);
-}
-
-static void __exit exit_rc_map_em_terratec(void)
-{
- ir_unregister_map(&em_terratec_map);
-}
-
-module_init(init_rc_map_em_terratec)
-module_exit(exit_rc_map_em_terratec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* encore-enltv-fm53.h - Keytable for encore_enltv_fm53 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Encore ENLTV-FM v5.3
- Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode encore_enltv_fm53[] = {
- { 0x10, KEY_POWER2},
- { 0x06, KEY_MUTE},
-
- { 0x09, KEY_1},
- { 0x1d, KEY_2},
- { 0x1f, KEY_3},
- { 0x19, KEY_4},
- { 0x1b, KEY_5},
- { 0x11, KEY_6},
- { 0x17, KEY_7},
- { 0x12, KEY_8},
- { 0x16, KEY_9},
- { 0x48, KEY_0},
-
- { 0x04, KEY_LIST}, /* -/-- */
- { 0x40, KEY_LAST}, /* recall */
-
- { 0x02, KEY_MODE}, /* TV/AV */
- { 0x05, KEY_CAMERA}, /* SNAPSHOT */
-
- { 0x4c, KEY_CHANNELUP}, /* UP */
- { 0x00, KEY_CHANNELDOWN}, /* DOWN */
- { 0x0d, KEY_VOLUMEUP}, /* RIGHT */
- { 0x15, KEY_VOLUMEDOWN}, /* LEFT */
- { 0x49, KEY_ENTER}, /* OK */
-
- { 0x54, KEY_RECORD},
- { 0x4d, KEY_PLAY}, /* pause */
-
- { 0x1e, KEY_MENU}, /* video setting */
- { 0x0e, KEY_RIGHT}, /* <- */
- { 0x1a, KEY_LEFT}, /* -> */
-
- { 0x0a, KEY_CLEAR}, /* video default */
- { 0x0c, KEY_ZOOM}, /* hide pannel */
- { 0x47, KEY_SLEEP}, /* shutdown */
-};
-
-static struct rc_keymap encore_enltv_fm53_map = {
- .map = {
- .scan = encore_enltv_fm53,
- .size = ARRAY_SIZE(encore_enltv_fm53),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_ENCORE_ENLTV_FM53,
- }
-};
-
-static int __init init_rc_map_encore_enltv_fm53(void)
-{
- return ir_register_map(&encore_enltv_fm53_map);
-}
-
-static void __exit exit_rc_map_encore_enltv_fm53(void)
-{
- ir_unregister_map(&encore_enltv_fm53_map);
-}
-
-module_init(init_rc_map_encore_enltv_fm53)
-module_exit(exit_rc_map_encore_enltv_fm53)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* encore-enltv.h - Keytable for encore_enltv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Encore ENLTV-FM - black plastic, white front cover with white glowing buttons
- Juan Pablo Sormani <sorman@gmail.com> */
-
-static struct ir_scancode encore_enltv[] = {
-
- /* Power button does nothing, neither in Windows app,
- although it sends data (used for BIOS wakeup?) */
- { 0x0d, KEY_MUTE },
-
- { 0x1e, KEY_TV },
- { 0x00, KEY_VIDEO },
- { 0x01, KEY_AUDIO }, /* music */
- { 0x02, KEY_MHP }, /* picture */
-
- { 0x1f, KEY_1 },
- { 0x03, KEY_2 },
- { 0x04, KEY_3 },
- { 0x05, KEY_4 },
- { 0x1c, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x1d, KEY_9 },
- { 0x0a, KEY_0 },
-
- { 0x09, KEY_LIST }, /* -/-- */
- { 0x0b, KEY_LAST }, /* recall */
-
- { 0x14, KEY_HOME }, /* win start menu */
- { 0x15, KEY_EXIT }, /* exit */
- { 0x16, KEY_CHANNELUP }, /* UP */
- { 0x12, KEY_CHANNELDOWN }, /* DOWN */
- { 0x0c, KEY_VOLUMEUP }, /* RIGHT */
- { 0x17, KEY_VOLUMEDOWN }, /* LEFT */
-
- { 0x18, KEY_ENTER }, /* OK */
-
- { 0x0e, KEY_ESC },
- { 0x13, KEY_CYCLEWINDOWS }, /* desktop */
- { 0x11, KEY_TAB },
- { 0x19, KEY_SWITCHVIDEOMODE }, /* switch */
-
- { 0x1a, KEY_MENU },
- { 0x1b, KEY_ZOOM }, /* fullscreen */
- { 0x44, KEY_TIME }, /* time shift */
- { 0x40, KEY_MODE }, /* source */
-
- { 0x5a, KEY_RECORD },
- { 0x42, KEY_PLAY }, /* play/pause */
- { 0x45, KEY_STOP },
- { 0x43, KEY_CAMERA }, /* camera icon */
-
- { 0x48, KEY_REWIND },
- { 0x4a, KEY_FASTFORWARD },
- { 0x49, KEY_PREVIOUS },
- { 0x4b, KEY_NEXT },
-
- { 0x4c, KEY_FAVORITES }, /* tv wall */
- { 0x4d, KEY_SOUND }, /* DVD sound */
- { 0x4e, KEY_LANGUAGE }, /* DVD lang */
- { 0x4f, KEY_TEXT }, /* DVD text */
-
- { 0x50, KEY_SLEEP }, /* shutdown */
- { 0x51, KEY_MODE }, /* stereo > main */
- { 0x52, KEY_SELECT }, /* stereo > sap */
- { 0x53, KEY_PROG1 }, /* teletext */
-
-
- { 0x59, KEY_RED }, /* AP1 */
- { 0x41, KEY_GREEN }, /* AP2 */
- { 0x47, KEY_YELLOW }, /* AP3 */
- { 0x57, KEY_BLUE }, /* AP4 */
-};
-
-static struct rc_keymap encore_enltv_map = {
- .map = {
- .scan = encore_enltv,
- .size = ARRAY_SIZE(encore_enltv),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_ENCORE_ENLTV,
- }
-};
-
-static int __init init_rc_map_encore_enltv(void)
-{
- return ir_register_map(&encore_enltv_map);
-}
-
-static void __exit exit_rc_map_encore_enltv(void)
-{
- ir_unregister_map(&encore_enltv_map);
-}
-
-module_init(init_rc_map_encore_enltv)
-module_exit(exit_rc_map_encore_enltv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* encore-enltv2.h - Keytable for encore_enltv2 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton
- Mauro Carvalho Chehab <mchehab@infradead.org> */
-
-static struct ir_scancode encore_enltv2[] = {
- { 0x4c, KEY_POWER2 },
- { 0x4a, KEY_TUNER },
- { 0x40, KEY_1 },
- { 0x60, KEY_2 },
- { 0x50, KEY_3 },
- { 0x70, KEY_4 },
- { 0x48, KEY_5 },
- { 0x68, KEY_6 },
- { 0x58, KEY_7 },
- { 0x78, KEY_8 },
- { 0x44, KEY_9 },
- { 0x54, KEY_0 },
-
- { 0x64, KEY_LAST }, /* +100 */
- { 0x4e, KEY_AGAIN }, /* Recall */
-
- { 0x6c, KEY_SWITCHVIDEOMODE }, /* Video Source */
- { 0x5e, KEY_MENU },
- { 0x56, KEY_SCREEN },
- { 0x7a, KEY_SETUP },
-
- { 0x46, KEY_MUTE },
- { 0x5c, KEY_MODE }, /* Stereo */
- { 0x74, KEY_INFO },
- { 0x7c, KEY_CLEAR },
-
- { 0x55, KEY_UP },
- { 0x49, KEY_DOWN },
- { 0x7e, KEY_LEFT },
- { 0x59, KEY_RIGHT },
- { 0x6a, KEY_ENTER },
-
- { 0x42, KEY_VOLUMEUP },
- { 0x62, KEY_VOLUMEDOWN },
- { 0x52, KEY_CHANNELUP },
- { 0x72, KEY_CHANNELDOWN },
-
- { 0x41, KEY_RECORD },
- { 0x51, KEY_CAMERA }, /* Snapshot */
- { 0x75, KEY_TIME }, /* Timeshift */
- { 0x71, KEY_TV2 }, /* PIP */
-
- { 0x45, KEY_REWIND },
- { 0x6f, KEY_PAUSE },
- { 0x7d, KEY_FORWARD },
- { 0x79, KEY_STOP },
-};
-
-static struct rc_keymap encore_enltv2_map = {
- .map = {
- .scan = encore_enltv2,
- .size = ARRAY_SIZE(encore_enltv2),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_ENCORE_ENLTV2,
- }
-};
-
-static int __init init_rc_map_encore_enltv2(void)
-{
- return ir_register_map(&encore_enltv2_map);
-}
-
-static void __exit exit_rc_map_encore_enltv2(void)
-{
- ir_unregister_map(&encore_enltv2_map);
-}
-
-module_init(init_rc_map_encore_enltv2)
-module_exit(exit_rc_map_encore_enltv2)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* evga-indtube.h - Keytable for evga_indtube Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* EVGA inDtube
- Devin Heitmueller <devin.heitmueller@gmail.com>
- */
-
-static struct ir_scancode evga_indtube[] = {
- { 0x12, KEY_POWER},
- { 0x02, KEY_MODE}, /* TV */
- { 0x14, KEY_MUTE},
- { 0x1a, KEY_CHANNELUP},
- { 0x16, KEY_TV2}, /* PIP */
- { 0x1d, KEY_VOLUMEUP},
- { 0x05, KEY_CHANNELDOWN},
- { 0x0f, KEY_PLAYPAUSE},
- { 0x19, KEY_VOLUMEDOWN},
- { 0x1c, KEY_REWIND},
- { 0x0d, KEY_RECORD},
- { 0x18, KEY_FORWARD},
- { 0x1e, KEY_PREVIOUS},
- { 0x1b, KEY_STOP},
- { 0x1f, KEY_NEXT},
- { 0x13, KEY_CAMERA},
-};
-
-static struct rc_keymap evga_indtube_map = {
- .map = {
- .scan = evga_indtube,
- .size = ARRAY_SIZE(evga_indtube),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_EVGA_INDTUBE,
- }
-};
-
-static int __init init_rc_map_evga_indtube(void)
-{
- return ir_register_map(&evga_indtube_map);
-}
-
-static void __exit exit_rc_map_evga_indtube(void)
-{
- ir_unregister_map(&evga_indtube_map);
-}
-
-module_init(init_rc_map_evga_indtube)
-module_exit(exit_rc_map_evga_indtube)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* eztv.h - Keytable for eztv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Alfons Geser <a.geser@cox.net>
- * updates from Job D. R. Borges <jobdrb@ig.com.br> */
-
-static struct ir_scancode eztv[] = {
- { 0x12, KEY_POWER },
- { 0x01, KEY_TV }, /* DVR */
- { 0x15, KEY_DVD }, /* DVD */
- { 0x17, KEY_AUDIO }, /* music */
- /* DVR mode / DVD mode / music mode */
-
- { 0x1b, KEY_MUTE }, /* mute */
- { 0x02, KEY_LANGUAGE }, /* MTS/SAP / audio / autoseek */
- { 0x1e, KEY_SUBTITLE }, /* closed captioning / subtitle / seek */
- { 0x16, KEY_ZOOM }, /* full screen */
- { 0x1c, KEY_VIDEO }, /* video source / eject / delall */
- { 0x1d, KEY_RESTART }, /* playback / angle / del */
- { 0x2f, KEY_SEARCH }, /* scan / menu / playlist */
- { 0x30, KEY_CHANNEL }, /* CH surfing / bookmark / memo */
-
- { 0x31, KEY_HELP }, /* help */
- { 0x32, KEY_MODE }, /* num/memo */
- { 0x33, KEY_ESC }, /* cancel */
-
- { 0x0c, KEY_UP }, /* up */
- { 0x10, KEY_DOWN }, /* down */
- { 0x08, KEY_LEFT }, /* left */
- { 0x04, KEY_RIGHT }, /* right */
- { 0x03, KEY_SELECT }, /* select */
-
- { 0x1f, KEY_REWIND }, /* rewind */
- { 0x20, KEY_PLAYPAUSE },/* play/pause */
- { 0x29, KEY_FORWARD }, /* forward */
- { 0x14, KEY_AGAIN }, /* repeat */
- { 0x2b, KEY_RECORD }, /* recording */
- { 0x2c, KEY_STOP }, /* stop */
- { 0x2d, KEY_PLAY }, /* play */
- { 0x2e, KEY_CAMERA }, /* snapshot / shuffle */
-
- { 0x00, KEY_0 },
- { 0x05, KEY_1 },
- { 0x06, KEY_2 },
- { 0x07, KEY_3 },
- { 0x09, KEY_4 },
- { 0x0a, KEY_5 },
- { 0x0b, KEY_6 },
- { 0x0d, KEY_7 },
- { 0x0e, KEY_8 },
- { 0x0f, KEY_9 },
-
- { 0x2a, KEY_VOLUMEUP },
- { 0x11, KEY_VOLUMEDOWN },
- { 0x18, KEY_CHANNELUP },/* CH.tracking up */
- { 0x19, KEY_CHANNELDOWN },/* CH.tracking down */
-
- { 0x13, KEY_ENTER }, /* enter */
- { 0x21, KEY_DOT }, /* . (decimal dot) */
-};
-
-static struct rc_keymap eztv_map = {
- .map = {
- .scan = eztv,
- .size = ARRAY_SIZE(eztv),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_EZTV,
- }
-};
-
-static int __init init_rc_map_eztv(void)
-{
- return ir_register_map(&eztv_map);
-}
-
-static void __exit exit_rc_map_eztv(void)
-{
- ir_unregister_map(&eztv_map);
-}
-
-module_init(init_rc_map_eztv)
-module_exit(exit_rc_map_eztv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* flydvb.h - Keytable for flydvb Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode flydvb[] = {
- { 0x01, KEY_ZOOM }, /* Full Screen */
- { 0x00, KEY_POWER }, /* Power */
-
- { 0x03, KEY_1 },
- { 0x04, KEY_2 },
- { 0x05, KEY_3 },
- { 0x07, KEY_4 },
- { 0x08, KEY_5 },
- { 0x09, KEY_6 },
- { 0x0b, KEY_7 },
- { 0x0c, KEY_8 },
- { 0x0d, KEY_9 },
- { 0x06, KEY_AGAIN }, /* Recall */
- { 0x0f, KEY_0 },
- { 0x10, KEY_MUTE }, /* Mute */
- { 0x02, KEY_RADIO }, /* TV/Radio */
- { 0x1b, KEY_LANGUAGE }, /* SAP (Second Audio Program) */
-
- { 0x14, KEY_VOLUMEUP }, /* VOL+ */
- { 0x17, KEY_VOLUMEDOWN }, /* VOL- */
- { 0x12, KEY_CHANNELUP }, /* CH+ */
- { 0x13, KEY_CHANNELDOWN }, /* CH- */
- { 0x1d, KEY_ENTER }, /* Enter */
-
- { 0x1a, KEY_MODE }, /* PIP */
- { 0x18, KEY_TUNER }, /* Source */
-
- { 0x1e, KEY_RECORD }, /* Record/Pause */
- { 0x15, KEY_ANGLE }, /* Swap (no label on key) */
- { 0x1c, KEY_PAUSE }, /* Timeshift/Pause */
- { 0x19, KEY_BACK }, /* Rewind << */
- { 0x0a, KEY_PLAYPAUSE }, /* Play/Pause */
- { 0x1f, KEY_FORWARD }, /* Forward >> */
- { 0x16, KEY_PREVIOUS }, /* Back |<< */
- { 0x11, KEY_STOP }, /* Stop */
- { 0x0e, KEY_NEXT }, /* End >>| */
-};
-
-static struct rc_keymap flydvb_map = {
- .map = {
- .scan = flydvb,
- .size = ARRAY_SIZE(flydvb),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_FLYDVB,
- }
-};
-
-static int __init init_rc_map_flydvb(void)
-{
- return ir_register_map(&flydvb_map);
-}
-
-static void __exit exit_rc_map_flydvb(void)
-{
- ir_unregister_map(&flydvb_map);
-}
-
-module_init(init_rc_map_flydvb)
-module_exit(exit_rc_map_flydvb)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* flyvideo.h - Keytable for flyvideo Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode flyvideo[] = {
- { 0x0f, KEY_0 },
- { 0x03, KEY_1 },
- { 0x04, KEY_2 },
- { 0x05, KEY_3 },
- { 0x07, KEY_4 },
- { 0x08, KEY_5 },
- { 0x09, KEY_6 },
- { 0x0b, KEY_7 },
- { 0x0c, KEY_8 },
- { 0x0d, KEY_9 },
-
- { 0x0e, KEY_MODE }, /* Air/Cable */
- { 0x11, KEY_VIDEO }, /* Video */
- { 0x15, KEY_AUDIO }, /* Audio */
- { 0x00, KEY_POWER }, /* Power */
- { 0x18, KEY_TUNER }, /* AV Source */
- { 0x02, KEY_ZOOM }, /* Fullscreen */
- { 0x1a, KEY_LANGUAGE }, /* Stereo */
- { 0x1b, KEY_MUTE }, /* Mute */
- { 0x14, KEY_VOLUMEUP }, /* Volume + */
- { 0x17, KEY_VOLUMEDOWN },/* Volume - */
- { 0x12, KEY_CHANNELUP },/* Channel + */
- { 0x13, KEY_CHANNELDOWN },/* Channel - */
- { 0x06, KEY_AGAIN }, /* Recall */
- { 0x10, KEY_ENTER }, /* Enter */
-
- { 0x19, KEY_BACK }, /* Rewind ( <<< ) */
- { 0x1f, KEY_FORWARD }, /* Forward ( >>> ) */
- { 0x0a, KEY_ANGLE }, /* no label, may be used as the PAUSE button */
-};
-
-static struct rc_keymap flyvideo_map = {
- .map = {
- .scan = flyvideo,
- .size = ARRAY_SIZE(flyvideo),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_FLYVIDEO,
- }
-};
-
-static int __init init_rc_map_flyvideo(void)
-{
- return ir_register_map(&flyvideo_map);
-}
-
-static void __exit exit_rc_map_flyvideo(void)
-{
- ir_unregister_map(&flyvideo_map);
-}
-
-module_init(init_rc_map_flyvideo)
-module_exit(exit_rc_map_flyvideo)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* fusionhdtv-mce.h - Keytable for fusionhdtv_mce Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* DViCO FUSION HDTV MCE remote */
-
-static struct ir_scancode fusionhdtv_mce[] = {
-
- { 0x0b, KEY_1 },
- { 0x17, KEY_2 },
- { 0x1b, KEY_3 },
- { 0x07, KEY_4 },
- { 0x50, KEY_5 },
- { 0x54, KEY_6 },
- { 0x48, KEY_7 },
- { 0x4c, KEY_8 },
- { 0x58, KEY_9 },
- { 0x03, KEY_0 },
-
- { 0x5e, KEY_OK },
- { 0x51, KEY_UP },
- { 0x53, KEY_DOWN },
- { 0x5b, KEY_LEFT },
- { 0x5f, KEY_RIGHT },
-
- { 0x02, KEY_TV }, /* Labeled DTV on remote */
- { 0x0e, KEY_MP3 },
- { 0x1a, KEY_DVD },
- { 0x1e, KEY_FAVORITES }, /* Labeled CPF on remote */
- { 0x16, KEY_SETUP },
- { 0x46, KEY_POWER2 }, /* TV On/Off button on remote */
- { 0x0a, KEY_EPG }, /* Labeled Guide on remote */
-
- { 0x49, KEY_BACK },
- { 0x59, KEY_INFO }, /* Labeled MORE on remote */
- { 0x4d, KEY_MENU }, /* Labeled DVDMENU on remote */
- { 0x55, KEY_CYCLEWINDOWS }, /* Labeled ALT-TAB on remote */
-
- { 0x0f, KEY_PREVIOUSSONG }, /* Labeled |<< REPLAY on remote */
- { 0x12, KEY_NEXTSONG }, /* Labeled >>| SKIP on remote */
- { 0x42, KEY_ENTER }, /* Labeled START with a green
- MS windows logo on remote */
-
- { 0x15, KEY_VOLUMEUP },
- { 0x05, KEY_VOLUMEDOWN },
- { 0x11, KEY_CHANNELUP },
- { 0x09, KEY_CHANNELDOWN },
-
- { 0x52, KEY_CAMERA },
- { 0x5a, KEY_TUNER },
- { 0x19, KEY_OPEN },
-
- { 0x13, KEY_MODE }, /* 4:3 16:9 select */
- { 0x1f, KEY_ZOOM },
-
- { 0x43, KEY_REWIND },
- { 0x47, KEY_PLAYPAUSE },
- { 0x4f, KEY_FASTFORWARD },
- { 0x57, KEY_MUTE },
- { 0x0d, KEY_STOP },
- { 0x01, KEY_RECORD },
- { 0x4e, KEY_POWER },
-};
-
-static struct rc_keymap fusionhdtv_mce_map = {
- .map = {
- .scan = fusionhdtv_mce,
- .size = ARRAY_SIZE(fusionhdtv_mce),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_FUSIONHDTV_MCE,
- }
-};
-
-static int __init init_rc_map_fusionhdtv_mce(void)
-{
- return ir_register_map(&fusionhdtv_mce_map);
-}
-
-static void __exit exit_rc_map_fusionhdtv_mce(void)
-{
- ir_unregister_map(&fusionhdtv_mce_map);
-}
-
-module_init(init_rc_map_fusionhdtv_mce)
-module_exit(exit_rc_map_fusionhdtv_mce)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* gadmei-rm008z.h - Keytable for gadmei_rm008z Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* GADMEI UTV330+ RM008Z remote
- Shine Liu <shinel@foxmail.com>
- */
-
-static struct ir_scancode gadmei_rm008z[] = {
- { 0x14, KEY_POWER2}, /* POWER OFF */
- { 0x0c, KEY_MUTE}, /* MUTE */
-
- { 0x18, KEY_TV}, /* TV */
- { 0x0e, KEY_VIDEO}, /* AV */
- { 0x0b, KEY_AUDIO}, /* SV */
- { 0x0f, KEY_RADIO}, /* FM */
-
- { 0x00, KEY_1},
- { 0x01, KEY_2},
- { 0x02, KEY_3},
- { 0x03, KEY_4},
- { 0x04, KEY_5},
- { 0x05, KEY_6},
- { 0x06, KEY_7},
- { 0x07, KEY_8},
- { 0x08, KEY_9},
- { 0x09, KEY_0},
- { 0x0a, KEY_INFO}, /* OSD */
- { 0x1c, KEY_BACKSPACE}, /* LAST */
-
- { 0x0d, KEY_PLAY}, /* PLAY */
- { 0x1e, KEY_CAMERA}, /* SNAPSHOT */
- { 0x1a, KEY_RECORD}, /* RECORD */
- { 0x17, KEY_STOP}, /* STOP */
-
- { 0x1f, KEY_UP}, /* UP */
- { 0x44, KEY_DOWN}, /* DOWN */
- { 0x46, KEY_TAB}, /* BACK */
- { 0x4a, KEY_ZOOM}, /* FULLSECREEN */
-
- { 0x10, KEY_VOLUMEUP}, /* VOLUMEUP */
- { 0x11, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */
- { 0x12, KEY_CHANNELUP}, /* CHANNELUP */
- { 0x13, KEY_CHANNELDOWN}, /* CHANNELDOWN */
- { 0x15, KEY_ENTER}, /* OK */
-};
-
-static struct rc_keymap gadmei_rm008z_map = {
- .map = {
- .scan = gadmei_rm008z,
- .size = ARRAY_SIZE(gadmei_rm008z),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_GADMEI_RM008Z,
- }
-};
-
-static int __init init_rc_map_gadmei_rm008z(void)
-{
- return ir_register_map(&gadmei_rm008z_map);
-}
-
-static void __exit exit_rc_map_gadmei_rm008z(void)
-{
- ir_unregister_map(&gadmei_rm008z_map);
-}
-
-module_init(init_rc_map_gadmei_rm008z)
-module_exit(exit_rc_map_gadmei_rm008z)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* genius-tvgo-a11mce.h - Keytable for genius_tvgo_a11mce Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Remote control for the Genius TVGO A11MCE
- * Adrian Pardini <pardo.bsso@gmail.com>
- */
-
-static struct ir_scancode genius_tvgo_a11mce[] = {
- /* Keys 0 to 9 */
- { 0x48, KEY_0 },
- { 0x09, KEY_1 },
- { 0x1d, KEY_2 },
- { 0x1f, KEY_3 },
- { 0x19, KEY_4 },
- { 0x1b, KEY_5 },
- { 0x11, KEY_6 },
- { 0x17, KEY_7 },
- { 0x12, KEY_8 },
- { 0x16, KEY_9 },
-
- { 0x54, KEY_RECORD }, /* recording */
- { 0x06, KEY_MUTE }, /* mute */
- { 0x10, KEY_POWER },
- { 0x40, KEY_LAST }, /* recall */
- { 0x4c, KEY_CHANNELUP }, /* channel / program + */
- { 0x00, KEY_CHANNELDOWN }, /* channel / program - */
- { 0x0d, KEY_VOLUMEUP },
- { 0x15, KEY_VOLUMEDOWN },
- { 0x4d, KEY_OK }, /* also labeled as Pause */
- { 0x1c, KEY_ZOOM }, /* full screen and Stop*/
- { 0x02, KEY_MODE }, /* AV Source or Rewind*/
- { 0x04, KEY_LIST }, /* -/-- */
- /* small arrows above numbers */
- { 0x1a, KEY_NEXT }, /* also Fast Forward */
- { 0x0e, KEY_PREVIOUS }, /* also Rewind */
- /* these are in a rather non standard layout and have
- an alternate name written */
- { 0x1e, KEY_UP }, /* Video Setting */
- { 0x0a, KEY_DOWN }, /* Video Default */
- { 0x05, KEY_CAMERA }, /* Snapshot */
- { 0x0c, KEY_RIGHT }, /* Hide Panel */
- /* Four buttons without label */
- { 0x49, KEY_RED },
- { 0x0b, KEY_GREEN },
- { 0x13, KEY_YELLOW },
- { 0x50, KEY_BLUE },
-};
-
-static struct rc_keymap genius_tvgo_a11mce_map = {
- .map = {
- .scan = genius_tvgo_a11mce,
- .size = ARRAY_SIZE(genius_tvgo_a11mce),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_GENIUS_TVGO_A11MCE,
- }
-};
-
-static int __init init_rc_map_genius_tvgo_a11mce(void)
-{
- return ir_register_map(&genius_tvgo_a11mce_map);
-}
-
-static void __exit exit_rc_map_genius_tvgo_a11mce(void)
-{
- ir_unregister_map(&genius_tvgo_a11mce_map);
-}
-
-module_init(init_rc_map_genius_tvgo_a11mce)
-module_exit(exit_rc_map_genius_tvgo_a11mce)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* gotview7135.h - Keytable for gotview7135 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Mike Baikov <mike@baikov.com> */
-
-static struct ir_scancode gotview7135[] = {
-
- { 0x11, KEY_POWER },
- { 0x35, KEY_TV },
- { 0x1b, KEY_0 },
- { 0x29, KEY_1 },
- { 0x19, KEY_2 },
- { 0x39, KEY_3 },
- { 0x1f, KEY_4 },
- { 0x2c, KEY_5 },
- { 0x21, KEY_6 },
- { 0x24, KEY_7 },
- { 0x18, KEY_8 },
- { 0x2b, KEY_9 },
- { 0x3b, KEY_AGAIN }, /* LOOP */
- { 0x06, KEY_AUDIO },
- { 0x31, KEY_PRINT }, /* PREVIEW */
- { 0x3e, KEY_VIDEO },
- { 0x10, KEY_CHANNELUP },
- { 0x20, KEY_CHANNELDOWN },
- { 0x0c, KEY_VOLUMEDOWN },
- { 0x28, KEY_VOLUMEUP },
- { 0x08, KEY_MUTE },
- { 0x26, KEY_SEARCH }, /* SCAN */
- { 0x3f, KEY_CAMERA }, /* SNAPSHOT */
- { 0x12, KEY_RECORD },
- { 0x32, KEY_STOP },
- { 0x3c, KEY_PLAY },
- { 0x1d, KEY_REWIND },
- { 0x2d, KEY_PAUSE },
- { 0x0d, KEY_FORWARD },
- { 0x05, KEY_ZOOM }, /*FULL*/
-
- { 0x2a, KEY_F21 }, /* LIVE TIMESHIFT */
- { 0x0e, KEY_F22 }, /* MIN TIMESHIFT */
- { 0x1e, KEY_TIME }, /* TIMESHIFT */
- { 0x38, KEY_F24 }, /* NORMAL TIMESHIFT */
-};
-
-static struct rc_keymap gotview7135_map = {
- .map = {
- .scan = gotview7135,
- .size = ARRAY_SIZE(gotview7135),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_GOTVIEW7135,
- }
-};
-
-static int __init init_rc_map_gotview7135(void)
-{
- return ir_register_map(&gotview7135_map);
-}
-
-static void __exit exit_rc_map_gotview7135(void)
-{
- ir_unregister_map(&gotview7135_map);
-}
-
-module_init(init_rc_map_gotview7135)
-module_exit(exit_rc_map_gotview7135)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* hauppauge-new.h - Keytable for hauppauge_new Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Hauppauge: the newer, gray remotes (seems there are multiple
- * slightly different versions), shipped with cx88+ivtv cards.
- * almost rc5 coding, but some non-standard keys */
-
-static struct ir_scancode hauppauge_new[] = {
- /* Keys 0 to 9 */
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- { 0x0a, KEY_TEXT }, /* keypad asterisk as well */
- { 0x0b, KEY_RED }, /* red button */
- { 0x0c, KEY_RADIO },
- { 0x0d, KEY_MENU },
- { 0x0e, KEY_SUBTITLE }, /* also the # key */
- { 0x0f, KEY_MUTE },
- { 0x10, KEY_VOLUMEUP },
- { 0x11, KEY_VOLUMEDOWN },
- { 0x12, KEY_PREVIOUS }, /* previous channel */
- { 0x14, KEY_UP },
- { 0x15, KEY_DOWN },
- { 0x16, KEY_LEFT },
- { 0x17, KEY_RIGHT },
- { 0x18, KEY_VIDEO }, /* Videos */
- { 0x19, KEY_AUDIO }, /* Music */
- /* 0x1a: Pictures - presume this means
- "Multimedia Home Platform" -
- no "PICTURES" key in input.h
- */
- { 0x1a, KEY_MHP },
-
- { 0x1b, KEY_EPG }, /* Guide */
- { 0x1c, KEY_TV },
- { 0x1e, KEY_NEXTSONG }, /* skip >| */
- { 0x1f, KEY_EXIT }, /* back/exit */
- { 0x20, KEY_CHANNELUP }, /* channel / program + */
- { 0x21, KEY_CHANNELDOWN }, /* channel / program - */
- { 0x22, KEY_CHANNEL }, /* source (old black remote) */
- { 0x24, KEY_PREVIOUSSONG }, /* replay |< */
- { 0x25, KEY_ENTER }, /* OK */
- { 0x26, KEY_SLEEP }, /* minimize (old black remote) */
- { 0x29, KEY_BLUE }, /* blue key */
- { 0x2e, KEY_GREEN }, /* green button */
- { 0x30, KEY_PAUSE }, /* pause */
- { 0x32, KEY_REWIND }, /* backward << */
- { 0x34, KEY_FASTFORWARD }, /* forward >> */
- { 0x35, KEY_PLAY },
- { 0x36, KEY_STOP },
- { 0x37, KEY_RECORD }, /* recording */
- { 0x38, KEY_YELLOW }, /* yellow key */
- { 0x3b, KEY_SELECT }, /* top right button */
- { 0x3c, KEY_ZOOM }, /* full */
- { 0x3d, KEY_POWER }, /* system power (green button) */
-};
-
-static struct rc_keymap hauppauge_new_map = {
- .map = {
- .scan = hauppauge_new,
- .size = ARRAY_SIZE(hauppauge_new),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_HAUPPAUGE_NEW,
- }
-};
-
-static int __init init_rc_map_hauppauge_new(void)
-{
- return ir_register_map(&hauppauge_new_map);
-}
-
-static void __exit exit_rc_map_hauppauge_new(void)
-{
- ir_unregister_map(&hauppauge_new_map);
-}
-
-module_init(init_rc_map_hauppauge_new)
-module_exit(exit_rc_map_hauppauge_new)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* rc5-imon-mce.c - Keytable for Windows Media Center RC-6 remotes for use
- * with the SoundGraph iMON/Antec Veris hardware IR decoder
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* mce-mode imon mce remote key table */
-static struct ir_scancode imon_mce[] = {
- /* keys sorted mostly by frequency of use to optimize lookups */
- { 0x800ff415, KEY_REWIND },
- { 0x800ff414, KEY_FASTFORWARD },
- { 0x800ff41b, KEY_PREVIOUS },
- { 0x800ff41a, KEY_NEXT },
-
- { 0x800ff416, KEY_PLAY },
- { 0x800ff418, KEY_PAUSE },
- { 0x800ff419, KEY_STOP },
- { 0x800ff417, KEY_RECORD },
-
- { 0x02000052, KEY_UP },
- { 0x02000051, KEY_DOWN },
- { 0x02000050, KEY_LEFT },
- { 0x0200004f, KEY_RIGHT },
-
- { 0x800ff41e, KEY_UP },
- { 0x800ff41f, KEY_DOWN },
- { 0x800ff420, KEY_LEFT },
- { 0x800ff421, KEY_RIGHT },
-
- /* 0x800ff40b also KEY_NUMERIC_POUND on some receivers */
- { 0x800ff40b, KEY_ENTER },
- { 0x02000028, KEY_ENTER },
-/* the OK and Enter buttons decode to the same value on some remotes
- { 0x02000028, KEY_OK }, */
- { 0x800ff422, KEY_OK },
- { 0x0200002a, KEY_EXIT },
- { 0x800ff423, KEY_EXIT },
- { 0x02000029, KEY_DELETE },
- /* 0x800ff40a also KEY_NUMERIC_STAR on some receivers */
- { 0x800ff40a, KEY_DELETE },
-
- { 0x800ff40e, KEY_MUTE },
- { 0x800ff410, KEY_VOLUMEUP },
- { 0x800ff411, KEY_VOLUMEDOWN },
- { 0x800ff412, KEY_CHANNELUP },
- { 0x800ff413, KEY_CHANNELDOWN },
-
- { 0x0200001e, KEY_NUMERIC_1 },
- { 0x0200001f, KEY_NUMERIC_2 },
- { 0x02000020, KEY_NUMERIC_3 },
- { 0x02000021, KEY_NUMERIC_4 },
- { 0x02000022, KEY_NUMERIC_5 },
- { 0x02000023, KEY_NUMERIC_6 },
- { 0x02000024, KEY_NUMERIC_7 },
- { 0x02000025, KEY_NUMERIC_8 },
- { 0x02000026, KEY_NUMERIC_9 },
- { 0x02000027, KEY_NUMERIC_0 },
-
- { 0x800ff401, KEY_NUMERIC_1 },
- { 0x800ff402, KEY_NUMERIC_2 },
- { 0x800ff403, KEY_NUMERIC_3 },
- { 0x800ff404, KEY_NUMERIC_4 },
- { 0x800ff405, KEY_NUMERIC_5 },
- { 0x800ff406, KEY_NUMERIC_6 },
- { 0x800ff407, KEY_NUMERIC_7 },
- { 0x800ff408, KEY_NUMERIC_8 },
- { 0x800ff409, KEY_NUMERIC_9 },
- { 0x800ff400, KEY_NUMERIC_0 },
-
- { 0x02200025, KEY_NUMERIC_STAR },
- { 0x02200020, KEY_NUMERIC_POUND },
- /* 0x800ff41d also KEY_BLUE on some receivers */
- { 0x800ff41d, KEY_NUMERIC_STAR },
- /* 0x800ff41c also KEY_PREVIOUS on some receivers */
- { 0x800ff41c, KEY_NUMERIC_POUND },
-
- { 0x800ff446, KEY_TV },
- { 0x800ff447, KEY_AUDIO }, /* My Music */
- { 0x800ff448, KEY_PVR }, /* RecordedTV */
- { 0x800ff449, KEY_CAMERA },
- { 0x800ff44a, KEY_VIDEO },
- /* 0x800ff424 also KEY_MENU on some receivers */
- { 0x800ff424, KEY_DVD },
- /* 0x800ff425 also KEY_GREEN on some receivers */
- { 0x800ff425, KEY_TUNER }, /* LiveTV */
- { 0x800ff450, KEY_RADIO },
-
- { 0x800ff44c, KEY_LANGUAGE },
- { 0x800ff427, KEY_ZOOM }, /* Aspect */
-
- { 0x800ff45b, KEY_RED },
- { 0x800ff45c, KEY_GREEN },
- { 0x800ff45d, KEY_YELLOW },
- { 0x800ff45e, KEY_BLUE },
-
- { 0x800ff466, KEY_RED },
- /* { 0x800ff425, KEY_GREEN }, */
- { 0x800ff468, KEY_YELLOW },
- /* { 0x800ff41d, KEY_BLUE }, */
-
- { 0x800ff40f, KEY_INFO },
- { 0x800ff426, KEY_EPG }, /* Guide */
- { 0x800ff45a, KEY_SUBTITLE }, /* Caption/Teletext */
- { 0x800ff44d, KEY_TITLE },
-
- { 0x800ff40c, KEY_POWER },
- { 0x800ff40d, KEY_PROG1 }, /* Windows MCE button */
-
-};
-
-static struct rc_keymap imon_mce_map = {
- .map = {
- .scan = imon_mce,
- .size = ARRAY_SIZE(imon_mce),
- /* its RC6, but w/a hardware decoder */
- .ir_type = IR_TYPE_RC6,
- .name = RC_MAP_IMON_MCE,
- }
-};
-
-static int __init init_rc_map_imon_mce(void)
-{
- return ir_register_map(&imon_mce_map);
-}
-
-static void __exit exit_rc_map_imon_mce(void)
-{
- ir_unregister_map(&imon_mce_map);
-}
-
-module_init(init_rc_map_imon_mce)
-module_exit(exit_rc_map_imon_mce)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+++ /dev/null
-/* rc5-imon-pad.c - Keytable for SoundGraph iMON PAD and Antec Veris
- * RM-200 Remote Control
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * standard imon remote key table, which isn't really entirely
- * "standard", as different receivers decode the same key on the
- * same remote to different hex codes, and the silkscreened names
- * vary a bit between the SoundGraph and Antec remotes... ugh.
- */
-static struct ir_scancode imon_pad[] = {
- /* keys sorted mostly by frequency of use to optimize lookups */
- { 0x2a8195b7, KEY_REWIND },
- { 0x298315b7, KEY_REWIND },
- { 0x2b8115b7, KEY_FASTFORWARD },
- { 0x2b8315b7, KEY_FASTFORWARD },
- { 0x2b9115b7, KEY_PREVIOUS },
- { 0x298195b7, KEY_NEXT },
-
- { 0x2a8115b7, KEY_PLAY },
- { 0x2a8315b7, KEY_PLAY },
- { 0x2a9115b7, KEY_PAUSE },
- { 0x2b9715b7, KEY_STOP },
- { 0x298115b7, KEY_RECORD },
-
- { 0x01008000, KEY_UP },
- { 0x01007f00, KEY_DOWN },
- { 0x01000080, KEY_LEFT },
- { 0x0100007f, KEY_RIGHT },
-
- { 0x2aa515b7, KEY_UP },
- { 0x289515b7, KEY_DOWN },
- { 0x29a515b7, KEY_LEFT },
- { 0x2ba515b7, KEY_RIGHT },
-
- { 0x0200002c, KEY_SPACE }, /* Select/Space */
- { 0x2a9315b7, KEY_SPACE }, /* Select/Space */
- { 0x02000028, KEY_ENTER },
- { 0x28a195b7, KEY_ENTER },
- { 0x288195b7, KEY_EXIT },
- { 0x02000029, KEY_ESC },
- { 0x2bb715b7, KEY_ESC },
- { 0x0200002a, KEY_BACKSPACE },
- { 0x28a115b7, KEY_BACKSPACE },
-
- { 0x2b9595b7, KEY_MUTE },
- { 0x28a395b7, KEY_VOLUMEUP },
- { 0x28a595b7, KEY_VOLUMEDOWN },
- { 0x289395b7, KEY_CHANNELUP },
- { 0x288795b7, KEY_CHANNELDOWN },
-
- { 0x0200001e, KEY_NUMERIC_1 },
- { 0x0200001f, KEY_NUMERIC_2 },
- { 0x02000020, KEY_NUMERIC_3 },
- { 0x02000021, KEY_NUMERIC_4 },
- { 0x02000022, KEY_NUMERIC_5 },
- { 0x02000023, KEY_NUMERIC_6 },
- { 0x02000024, KEY_NUMERIC_7 },
- { 0x02000025, KEY_NUMERIC_8 },
- { 0x02000026, KEY_NUMERIC_9 },
- { 0x02000027, KEY_NUMERIC_0 },
-
- { 0x28b595b7, KEY_NUMERIC_1 },
- { 0x2bb195b7, KEY_NUMERIC_2 },
- { 0x28b195b7, KEY_NUMERIC_3 },
- { 0x2a8595b7, KEY_NUMERIC_4 },
- { 0x299595b7, KEY_NUMERIC_5 },
- { 0x2aa595b7, KEY_NUMERIC_6 },
- { 0x2b9395b7, KEY_NUMERIC_7 },
- { 0x2a8515b7, KEY_NUMERIC_8 },
- { 0x2aa115b7, KEY_NUMERIC_9 },
- { 0x2ba595b7, KEY_NUMERIC_0 },
-
- { 0x02200025, KEY_NUMERIC_STAR },
- { 0x28b515b7, KEY_NUMERIC_STAR },
- { 0x02200020, KEY_NUMERIC_POUND },
- { 0x29a115b7, KEY_NUMERIC_POUND },
-
- { 0x2b8515b7, KEY_VIDEO },
- { 0x299195b7, KEY_AUDIO },
- { 0x2ba115b7, KEY_CAMERA },
- { 0x28a515b7, KEY_TV },
- { 0x29a395b7, KEY_DVD },
- { 0x29a295b7, KEY_DVD },
-
- /* the Menu key between DVD and Subtitle on the RM-200... */
- { 0x2ba385b7, KEY_MENU },
- { 0x2ba395b7, KEY_MENU },
-
- { 0x288515b7, KEY_BOOKMARKS },
- { 0x2ab715b7, KEY_MEDIA }, /* Thumbnail */
- { 0x298595b7, KEY_SUBTITLE },
- { 0x2b8595b7, KEY_LANGUAGE },
-
- { 0x29a595b7, KEY_ZOOM },
- { 0x2aa395b7, KEY_SCREEN }, /* FullScreen */
-
- { 0x299115b7, KEY_KEYBOARD },
- { 0x299135b7, KEY_KEYBOARD },
-
- { 0x01010000, BTN_LEFT },
- { 0x01020000, BTN_RIGHT },
- { 0x01010080, BTN_LEFT },
- { 0x01020080, BTN_RIGHT },
- { 0x688301b7, BTN_LEFT },
- { 0x688481b7, BTN_RIGHT },
-
- { 0x2a9395b7, KEY_CYCLEWINDOWS }, /* TaskSwitcher */
- { 0x2b8395b7, KEY_TIME }, /* Timer */
-
- { 0x289115b7, KEY_POWER },
- { 0x29b195b7, KEY_EJECTCD }, /* the one next to play */
- { 0x299395b7, KEY_EJECTCLOSECD }, /* eject (by TaskSw) */
-
- { 0x02800000, KEY_CONTEXT_MENU }, /* Left Menu */
- { 0x2b8195b7, KEY_CONTEXT_MENU }, /* Left Menu*/
- { 0x02000065, KEY_COMPOSE }, /* RightMenu */
- { 0x28b715b7, KEY_COMPOSE }, /* RightMenu */
- { 0x2ab195b7, KEY_PROG1 }, /* Go or MultiMon */
- { 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */
-};
-
-static struct rc_keymap imon_pad_map = {
- .map = {
- .scan = imon_pad,
- .size = ARRAY_SIZE(imon_pad),
- /* actual protocol details unknown, hardware decoder */
- .ir_type = IR_TYPE_OTHER,
- .name = RC_MAP_IMON_PAD,
- }
-};
-
-static int __init init_rc_map_imon_pad(void)
-{
- return ir_register_map(&imon_pad_map);
-}
-
-static void __exit exit_rc_map_imon_pad(void)
-{
- ir_unregister_map(&imon_pad_map);
-}
-
-module_init(init_rc_map_imon_pad)
-module_exit(exit_rc_map_imon_pad)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+++ /dev/null
-/* iodata-bctv7e.h - Keytable for iodata_bctv7e Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* IO-DATA BCTV7E Remote */
-
-static struct ir_scancode iodata_bctv7e[] = {
- { 0x40, KEY_TV },
- { 0x20, KEY_RADIO }, /* FM */
- { 0x60, KEY_EPG },
- { 0x00, KEY_POWER },
-
- /* Keys 0 to 9 */
- { 0x44, KEY_0 }, /* 10 */
- { 0x50, KEY_1 },
- { 0x30, KEY_2 },
- { 0x70, KEY_3 },
- { 0x48, KEY_4 },
- { 0x28, KEY_5 },
- { 0x68, KEY_6 },
- { 0x58, KEY_7 },
- { 0x38, KEY_8 },
- { 0x78, KEY_9 },
-
- { 0x10, KEY_L }, /* Live */
- { 0x08, KEY_TIME }, /* Time Shift */
-
- { 0x18, KEY_PLAYPAUSE }, /* Play */
-
- { 0x24, KEY_ENTER }, /* 11 */
- { 0x64, KEY_ESC }, /* 12 */
- { 0x04, KEY_M }, /* Multi */
-
- { 0x54, KEY_VIDEO },
- { 0x34, KEY_CHANNELUP },
- { 0x74, KEY_VOLUMEUP },
- { 0x14, KEY_MUTE },
-
- { 0x4c, KEY_VCR }, /* SVIDEO */
- { 0x2c, KEY_CHANNELDOWN },
- { 0x6c, KEY_VOLUMEDOWN },
- { 0x0c, KEY_ZOOM },
-
- { 0x5c, KEY_PAUSE },
- { 0x3c, KEY_RED }, /* || (red) */
- { 0x7c, KEY_RECORD }, /* recording */
- { 0x1c, KEY_STOP },
-
- { 0x41, KEY_REWIND }, /* backward << */
- { 0x21, KEY_PLAY },
- { 0x61, KEY_FASTFORWARD }, /* forward >> */
- { 0x01, KEY_NEXT }, /* skip >| */
-};
-
-static struct rc_keymap iodata_bctv7e_map = {
- .map = {
- .scan = iodata_bctv7e,
- .size = ARRAY_SIZE(iodata_bctv7e),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_IODATA_BCTV7E,
- }
-};
-
-static int __init init_rc_map_iodata_bctv7e(void)
-{
- return ir_register_map(&iodata_bctv7e_map);
-}
-
-static void __exit exit_rc_map_iodata_bctv7e(void)
-{
- ir_unregister_map(&iodata_bctv7e_map);
-}
-
-module_init(init_rc_map_iodata_bctv7e)
-module_exit(exit_rc_map_iodata_bctv7e)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* kaiomy.h - Keytable for kaiomy Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Kaiomy TVnPC U2
- Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode kaiomy[] = {
- { 0x43, KEY_POWER2},
- { 0x01, KEY_LIST},
- { 0x0b, KEY_ZOOM},
- { 0x03, KEY_POWER},
-
- { 0x04, KEY_1},
- { 0x08, KEY_2},
- { 0x02, KEY_3},
-
- { 0x0f, KEY_4},
- { 0x05, KEY_5},
- { 0x06, KEY_6},
-
- { 0x0c, KEY_7},
- { 0x0d, KEY_8},
- { 0x0a, KEY_9},
-
- { 0x11, KEY_0},
-
- { 0x09, KEY_CHANNELUP},
- { 0x07, KEY_CHANNELDOWN},
-
- { 0x0e, KEY_VOLUMEUP},
- { 0x13, KEY_VOLUMEDOWN},
-
- { 0x10, KEY_HOME},
- { 0x12, KEY_ENTER},
-
- { 0x14, KEY_RECORD},
- { 0x15, KEY_STOP},
- { 0x16, KEY_PLAY},
- { 0x17, KEY_MUTE},
-
- { 0x18, KEY_UP},
- { 0x19, KEY_DOWN},
- { 0x1a, KEY_LEFT},
- { 0x1b, KEY_RIGHT},
-
- { 0x1c, KEY_RED},
- { 0x1d, KEY_GREEN},
- { 0x1e, KEY_YELLOW},
- { 0x1f, KEY_BLUE},
-};
-
-static struct rc_keymap kaiomy_map = {
- .map = {
- .scan = kaiomy,
- .size = ARRAY_SIZE(kaiomy),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_KAIOMY,
- }
-};
-
-static int __init init_rc_map_kaiomy(void)
-{
- return ir_register_map(&kaiomy_map);
-}
-
-static void __exit exit_rc_map_kaiomy(void)
-{
- ir_unregister_map(&kaiomy_map);
-}
-
-module_init(init_rc_map_kaiomy)
-module_exit(exit_rc_map_kaiomy)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* kworld-315u.h - Keytable for kworld_315u Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Kworld 315U
- */
-
-static struct ir_scancode kworld_315u[] = {
- { 0x6143, KEY_POWER },
- { 0x6101, KEY_TUNER }, /* source */
- { 0x610b, KEY_ZOOM },
- { 0x6103, KEY_POWER2 }, /* shutdown */
-
- { 0x6104, KEY_1 },
- { 0x6108, KEY_2 },
- { 0x6102, KEY_3 },
- { 0x6109, KEY_CHANNELUP },
-
- { 0x610f, KEY_4 },
- { 0x6105, KEY_5 },
- { 0x6106, KEY_6 },
- { 0x6107, KEY_CHANNELDOWN },
-
- { 0x610c, KEY_7 },
- { 0x610d, KEY_8 },
- { 0x610a, KEY_9 },
- { 0x610e, KEY_VOLUMEUP },
-
- { 0x6110, KEY_LAST },
- { 0x6111, KEY_0 },
- { 0x6112, KEY_ENTER },
- { 0x6113, KEY_VOLUMEDOWN },
-
- { 0x6114, KEY_RECORD },
- { 0x6115, KEY_STOP },
- { 0x6116, KEY_PLAY },
- { 0x6117, KEY_MUTE },
-
- { 0x6118, KEY_UP },
- { 0x6119, KEY_DOWN },
- { 0x611a, KEY_LEFT },
- { 0x611b, KEY_RIGHT },
-
- { 0x611c, KEY_RED },
- { 0x611d, KEY_GREEN },
- { 0x611e, KEY_YELLOW },
- { 0x611f, KEY_BLUE },
-};
-
-static struct rc_keymap kworld_315u_map = {
- .map = {
- .scan = kworld_315u,
- .size = ARRAY_SIZE(kworld_315u),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_KWORLD_315U,
- }
-};
-
-static int __init init_rc_map_kworld_315u(void)
-{
- return ir_register_map(&kworld_315u_map);
-}
-
-static void __exit exit_rc_map_kworld_315u(void)
-{
- ir_unregister_map(&kworld_315u_map);
-}
-
-module_init(init_rc_map_kworld_315u)
-module_exit(exit_rc_map_kworld_315u)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* kworld-plus-tv-analog.h - Keytable for kworld_plus_tv_analog Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Kworld Plus TV Analog Lite PCI IR
- Mauro Carvalho Chehab <mchehab@infradead.org>
- */
-
-static struct ir_scancode kworld_plus_tv_analog[] = {
- { 0x0c, KEY_PROG1 }, /* Kworld key */
- { 0x16, KEY_CLOSECD }, /* -> ) */
- { 0x1d, KEY_POWER2 },
-
- { 0x00, KEY_1 },
- { 0x01, KEY_2 },
- { 0x02, KEY_3 }, /* Two keys have the same code: 3 and left */
- { 0x03, KEY_4 }, /* Two keys have the same code: 3 and right */
- { 0x04, KEY_5 },
- { 0x05, KEY_6 },
- { 0x06, KEY_7 },
- { 0x07, KEY_8 },
- { 0x08, KEY_9 },
- { 0x0a, KEY_0 },
-
- { 0x09, KEY_AGAIN },
- { 0x14, KEY_MUTE },
-
- { 0x20, KEY_UP },
- { 0x21, KEY_DOWN },
- { 0x0b, KEY_ENTER },
-
- { 0x10, KEY_CHANNELUP },
- { 0x11, KEY_CHANNELDOWN },
-
- /* Couldn't map key left/key right since those
- conflict with '3' and '4' scancodes
- I dunno what the original driver does
- */
-
- { 0x13, KEY_VOLUMEUP },
- { 0x12, KEY_VOLUMEDOWN },
-
- /* The lower part of the IR
- There are several duplicated keycodes there.
- Most of them conflict with digits.
- Add mappings just to the unused scancodes.
- Somehow, the original driver has a way to know,
- but this doesn't seem to be on some GPIO.
- Also, it is not related to the time between keyup
- and keydown.
- */
- { 0x19, KEY_TIME}, /* Timeshift */
- { 0x1a, KEY_STOP},
- { 0x1b, KEY_RECORD},
-
- { 0x22, KEY_TEXT},
-
- { 0x15, KEY_AUDIO}, /* ((*)) */
- { 0x0f, KEY_ZOOM},
- { 0x1c, KEY_CAMERA}, /* snapshot */
-
- { 0x18, KEY_RED}, /* B */
- { 0x23, KEY_GREEN}, /* C */
-};
-
-static struct rc_keymap kworld_plus_tv_analog_map = {
- .map = {
- .scan = kworld_plus_tv_analog,
- .size = ARRAY_SIZE(kworld_plus_tv_analog),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_KWORLD_PLUS_TV_ANALOG,
- }
-};
-
-static int __init init_rc_map_kworld_plus_tv_analog(void)
-{
- return ir_register_map(&kworld_plus_tv_analog_map);
-}
-
-static void __exit exit_rc_map_kworld_plus_tv_analog(void)
-{
- ir_unregister_map(&kworld_plus_tv_analog_map);
-}
-
-module_init(init_rc_map_kworld_plus_tv_analog)
-module_exit(exit_rc_map_kworld_plus_tv_analog)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * LeadTek Y04G0051 remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode leadtek_y04g0051[] = {
- { 0x0300, KEY_POWER2 },
- { 0x0303, KEY_SCREEN },
- { 0x0304, KEY_RIGHT },
- { 0x0305, KEY_1 },
- { 0x0306, KEY_2 },
- { 0x0307, KEY_3 },
- { 0x0308, KEY_LEFT },
- { 0x0309, KEY_4 },
- { 0x030a, KEY_5 },
- { 0x030b, KEY_6 },
- { 0x030c, KEY_UP },
- { 0x030d, KEY_7 },
- { 0x030e, KEY_8 },
- { 0x030f, KEY_9 },
- { 0x0310, KEY_DOWN },
- { 0x0311, KEY_AGAIN },
- { 0x0312, KEY_0 },
- { 0x0313, KEY_OK }, /* 1st ok */
- { 0x0314, KEY_MUTE },
- { 0x0316, KEY_OK }, /* 2nd ok */
- { 0x031e, KEY_VIDEO }, /* 2nd video */
- { 0x031b, KEY_AUDIO },
- { 0x031f, KEY_TEXT },
- { 0x0340, KEY_SLEEP },
- { 0x0341, KEY_DOT },
- { 0x0342, KEY_REWIND },
- { 0x0343, KEY_PLAY },
- { 0x0344, KEY_FASTFORWARD },
- { 0x0345, KEY_TIME },
- { 0x0346, KEY_STOP }, /* 2nd stop */
- { 0x0347, KEY_RECORD },
- { 0x0348, KEY_CAMERA },
- { 0x0349, KEY_ESC },
- { 0x034a, KEY_NEW },
- { 0x034b, KEY_RED },
- { 0x034c, KEY_GREEN },
- { 0x034d, KEY_YELLOW },
- { 0x034e, KEY_BLUE },
- { 0x034f, KEY_MENU },
- { 0x0350, KEY_STOP }, /* 1st stop */
- { 0x0351, KEY_CHANNEL },
- { 0x0352, KEY_VIDEO }, /* 1st video */
- { 0x0353, KEY_EPG },
- { 0x0354, KEY_PREVIOUS },
- { 0x0355, KEY_NEXT },
- { 0x0356, KEY_TV },
- { 0x035a, KEY_VOLUMEDOWN },
- { 0x035b, KEY_CHANNELUP },
- { 0x035e, KEY_VOLUMEUP },
- { 0x035f, KEY_CHANNELDOWN },
-};
-
-static struct rc_keymap leadtek_y04g0051_map = {
- .map = {
- .scan = leadtek_y04g0051,
- .size = ARRAY_SIZE(leadtek_y04g0051),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_LEADTEK_Y04G0051,
- }
-};
-
-static int __init init_rc_map_leadtek_y04g0051(void)
-{
- return ir_register_map(&leadtek_y04g0051_map);
-}
-
-static void __exit exit_rc_map_leadtek_y04g0051(void)
-{
- ir_unregister_map(&leadtek_y04g0051_map);
-}
-
-module_init(init_rc_map_leadtek_y04g0051)
-module_exit(exit_rc_map_leadtek_y04g0051)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/* rc-lirc.c - Empty dummy keytable, for use when its preferred to pass
- * all raw IR data to the lirc userspace decoder.
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/ir-core.h>
-
-static struct ir_scancode lirc[] = {
- { },
-};
-
-static struct rc_keymap lirc_map = {
- .map = {
- .scan = lirc,
- .size = ARRAY_SIZE(lirc),
- .ir_type = IR_TYPE_LIRC,
- .name = RC_MAP_LIRC,
- }
-};
-
-static int __init init_rc_map_lirc(void)
-{
- return ir_register_map(&lirc_map);
-}
-
-static void __exit exit_rc_map_lirc(void)
-{
- ir_unregister_map(&lirc_map);
-}
-
-module_init(init_rc_map_lirc)
-module_exit(exit_rc_map_lirc)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+++ /dev/null
-/* LME2510 remote control
- *
- *
- * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-
-static struct ir_scancode lme2510_rc[] = {
- { 0xba45, KEY_0 },
- { 0xa05f, KEY_1 },
- { 0xaf50, KEY_2 },
- { 0xa25d, KEY_3 },
- { 0xbe41, KEY_4 },
- { 0xf50a, KEY_5 },
- { 0xbd42, KEY_6 },
- { 0xb847, KEY_7 },
- { 0xb649, KEY_8 },
- { 0xfa05, KEY_9 },
- { 0xbc43, KEY_POWER },
- { 0xb946, KEY_SUBTITLE },
- { 0xf906, KEY_PAUSE },
- { 0xfc03, KEY_MEDIA_REPEAT},
- { 0xfd02, KEY_PAUSE },
- { 0xa15e, KEY_VOLUMEUP },
- { 0xa35c, KEY_VOLUMEDOWN },
- { 0xf609, KEY_CHANNELUP },
- { 0xe51a, KEY_CHANNELDOWN },
- { 0xe11e, KEY_PLAY },
- { 0xe41b, KEY_ZOOM },
- { 0xa659, KEY_MUTE },
- { 0xa55a, KEY_TV },
- { 0xe718, KEY_RECORD },
- { 0xf807, KEY_EPG },
- { 0xfe01, KEY_STOP },
-
-};
-
-static struct rc_keymap lme2510_map = {
- .map = {
- .scan = lme2510_rc,
- .size = ARRAY_SIZE(lme2510_rc),
- .ir_type = IR_TYPE_UNKNOWN,
- .name = RC_MAP_LME2510,
- }
-};
-
-static int __init init_rc_lme2510_map(void)
-{
- return ir_register_map(&lme2510_map);
-}
-
-static void __exit exit_rc_lme2510_map(void)
-{
- ir_unregister_map(&lme2510_map);
-}
-
-module_init(init_rc_lme2510_map)
-module_exit(exit_rc_lme2510_map)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
+++ /dev/null
-/* manli.h - Keytable for manli Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Michael Tokarev <mjt@tls.msk.ru>
- keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
- least, and probably other cards too.
- The "ascii-art picture" below (in comments, first row
- is the keycode in hex, and subsequent row(s) shows
- the button labels (several variants when appropriate)
- helps to descide which keycodes to assign to the buttons.
- */
-
-static struct ir_scancode manli[] = {
-
- /* 0x1c 0x12 *
- * FUNCTION POWER *
- * FM (|) *
- * */
- { 0x1c, KEY_RADIO }, /*XXX*/
- { 0x12, KEY_POWER },
-
- /* 0x01 0x02 0x03 *
- * 1 2 3 *
- * *
- * 0x04 0x05 0x06 *
- * 4 5 6 *
- * *
- * 0x07 0x08 0x09 *
- * 7 8 9 *
- * */
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- /* 0x0a 0x00 0x17 *
- * RECALL 0 +100 *
- * PLUS *
- * */
- { 0x0a, KEY_AGAIN }, /*XXX KEY_REWIND? */
- { 0x00, KEY_0 },
- { 0x17, KEY_DIGITS }, /*XXX*/
-
- /* 0x14 0x10 *
- * MENU INFO *
- * OSD */
- { 0x14, KEY_MENU },
- { 0x10, KEY_INFO },
-
- /* 0x0b *
- * Up *
- * *
- * 0x18 0x16 0x0c *
- * Left Ok Right *
- * *
- * 0x015 *
- * Down *
- * */
- { 0x0b, KEY_UP },
- { 0x18, KEY_LEFT },
- { 0x16, KEY_OK }, /*XXX KEY_SELECT? KEY_ENTER? */
- { 0x0c, KEY_RIGHT },
- { 0x15, KEY_DOWN },
-
- /* 0x11 0x0d *
- * TV/AV MODE *
- * SOURCE STEREO *
- * */
- { 0x11, KEY_TV }, /*XXX*/
- { 0x0d, KEY_MODE }, /*XXX there's no KEY_STEREO */
-
- /* 0x0f 0x1b 0x1a *
- * AUDIO Vol+ Chan+ *
- * TIMESHIFT??? *
- * *
- * 0x0e 0x1f 0x1e *
- * SLEEP Vol- Chan- *
- * */
- { 0x0f, KEY_AUDIO },
- { 0x1b, KEY_VOLUMEUP },
- { 0x1a, KEY_CHANNELUP },
- { 0x0e, KEY_TIME },
- { 0x1f, KEY_VOLUMEDOWN },
- { 0x1e, KEY_CHANNELDOWN },
-
- /* 0x13 0x19 *
- * MUTE SNAPSHOT*
- * */
- { 0x13, KEY_MUTE },
- { 0x19, KEY_CAMERA },
-
- /* 0x1d unused ? */
-};
-
-static struct rc_keymap manli_map = {
- .map = {
- .scan = manli,
- .size = ARRAY_SIZE(manli),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_MANLI,
- }
-};
-
-static int __init init_rc_map_manli(void)
-{
- return ir_register_map(&manli_map);
-}
-
-static void __exit exit_rc_map_manli(void)
-{
- ir_unregister_map(&manli_map);
-}
-
-module_init(init_rc_map_manli)
-module_exit(exit_rc_map_manli)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * MSI DIGIVOX mini II remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode msi_digivox_ii[] = {
- { 0x0002, KEY_2 },
- { 0x0003, KEY_UP }, /* up */
- { 0x0004, KEY_3 },
- { 0x0005, KEY_CHANNELDOWN },
- { 0x0008, KEY_5 },
- { 0x0009, KEY_0 },
- { 0x000b, KEY_8 },
- { 0x000d, KEY_DOWN }, /* down */
- { 0x0010, KEY_9 },
- { 0x0011, KEY_7 },
- { 0x0014, KEY_VOLUMEUP },
- { 0x0015, KEY_CHANNELUP },
- { 0x0016, KEY_OK },
- { 0x0017, KEY_POWER2 },
- { 0x001a, KEY_1 },
- { 0x001c, KEY_4 },
- { 0x001d, KEY_6 },
- { 0x001f, KEY_VOLUMEDOWN },
-};
-
-static struct rc_keymap msi_digivox_ii_map = {
- .map = {
- .scan = msi_digivox_ii,
- .size = ARRAY_SIZE(msi_digivox_ii),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_MSI_DIGIVOX_II,
- }
-};
-
-static int __init init_rc_map_msi_digivox_ii(void)
-{
- return ir_register_map(&msi_digivox_ii_map);
-}
-
-static void __exit exit_rc_map_msi_digivox_ii(void)
-{
- ir_unregister_map(&msi_digivox_ii_map);
-}
-
-module_init(init_rc_map_msi_digivox_ii)
-module_exit(exit_rc_map_msi_digivox_ii)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/*
- * MSI DIGIVOX mini III remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* MSI DIGIVOX mini III */
-/* Uses NEC extended 0x61d6. */
-/* This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote
- since rc-kworld-315u.c lacks NEC extended address byte. */
-static struct ir_scancode msi_digivox_iii[] = {
- { 0x61d601, KEY_VIDEO }, /* Source */
- { 0x61d602, KEY_3 },
- { 0x61d603, KEY_POWER }, /* ShutDown */
- { 0x61d604, KEY_1 },
- { 0x61d605, KEY_5 },
- { 0x61d606, KEY_6 },
- { 0x61d607, KEY_CHANNELDOWN }, /* CH- */
- { 0x61d608, KEY_2 },
- { 0x61d609, KEY_CHANNELUP }, /* CH+ */
- { 0x61d60a, KEY_9 },
- { 0x61d60b, KEY_ZOOM }, /* Zoom */
- { 0x61d60c, KEY_7 },
- { 0x61d60d, KEY_8 },
- { 0x61d60e, KEY_VOLUMEUP }, /* Vol+ */
- { 0x61d60f, KEY_4 },
- { 0x61d610, KEY_ESC }, /* [back up arrow] */
- { 0x61d611, KEY_0 },
- { 0x61d612, KEY_OK }, /* [enter arrow] */
- { 0x61d613, KEY_VOLUMEDOWN }, /* Vol- */
- { 0x61d614, KEY_RECORD }, /* Rec */
- { 0x61d615, KEY_STOP }, /* Stop */
- { 0x61d616, KEY_PLAY }, /* Play */
- { 0x61d617, KEY_MUTE }, /* Mute */
- { 0x61d618, KEY_UP },
- { 0x61d619, KEY_DOWN },
- { 0x61d61a, KEY_LEFT },
- { 0x61d61b, KEY_RIGHT },
- { 0x61d61c, KEY_RED },
- { 0x61d61d, KEY_GREEN },
- { 0x61d61e, KEY_YELLOW },
- { 0x61d61f, KEY_BLUE },
- { 0x61d643, KEY_POWER2 }, /* [red power button] */
-};
-
-static struct rc_keymap msi_digivox_iii_map = {
- .map = {
- .scan = msi_digivox_iii,
- .size = ARRAY_SIZE(msi_digivox_iii),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_MSI_DIGIVOX_III,
- }
-};
-
-static int __init init_rc_map_msi_digivox_iii(void)
-{
- return ir_register_map(&msi_digivox_iii_map);
-}
-
-static void __exit exit_rc_map_msi_digivox_iii(void)
-{
- ir_unregister_map(&msi_digivox_iii_map);
-}
-
-module_init(init_rc_map_msi_digivox_iii)
-module_exit(exit_rc_map_msi_digivox_iii)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
- is marked "KS003". The controller is I2C at address 0x30, but does not seem
- to respond to probes until a read is performed from a valid device.
- I don't know why...
-
- Note: This remote may be of similar or identical design to the
- Pixelview remote (?). The raw codes and duplicate button codes
- appear to be the same.
-
- Henry Wong <henry@stuffedcow.net>
- Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
-*/
-
-static struct ir_scancode msi_tvanywhere_plus[] = {
-
-/* ---- Remote Button Layout ----
-
- POWER SOURCE SCAN MUTE
- TV/FM 1 2 3
- |> 4 5 6
- <| 7 8 9
- ^^UP 0 + RECALL
- vvDN RECORD STOP PLAY
-
- MINIMIZE ZOOM
-
- CH+
- VOL- VOL+
- CH-
-
- SNAPSHOT MTS
-
- << FUNC >> RESET
-*/
-
- { 0x01, KEY_1 }, /* 1 */
- { 0x0b, KEY_2 }, /* 2 */
- { 0x1b, KEY_3 }, /* 3 */
- { 0x05, KEY_4 }, /* 4 */
- { 0x09, KEY_5 }, /* 5 */
- { 0x15, KEY_6 }, /* 6 */
- { 0x06, KEY_7 }, /* 7 */
- { 0x0a, KEY_8 }, /* 8 */
- { 0x12, KEY_9 }, /* 9 */
- { 0x02, KEY_0 }, /* 0 */
- { 0x10, KEY_KPPLUS }, /* + */
- { 0x13, KEY_AGAIN }, /* Recall */
-
- { 0x1e, KEY_POWER }, /* Power */
- { 0x07, KEY_TUNER }, /* Source */
- { 0x1c, KEY_SEARCH }, /* Scan */
- { 0x18, KEY_MUTE }, /* Mute */
-
- { 0x03, KEY_RADIO }, /* TV/FM */
- /* The next four keys are duplicates that appear to send the
- same IR code as Ch+, Ch-, >>, and << . The raw code assigned
- to them is the actual code + 0x20 - they will never be
- detected as such unless some way is discovered to distinguish
- these buttons from those that have the same code. */
- { 0x3f, KEY_RIGHT }, /* |> and Ch+ */
- { 0x37, KEY_LEFT }, /* <| and Ch- */
- { 0x2c, KEY_UP }, /* ^^Up and >> */
- { 0x24, KEY_DOWN }, /* vvDn and << */
-
- { 0x00, KEY_RECORD }, /* Record */
- { 0x08, KEY_STOP }, /* Stop */
- { 0x11, KEY_PLAY }, /* Play */
-
- { 0x0f, KEY_CLOSE }, /* Minimize */
- { 0x19, KEY_ZOOM }, /* Zoom */
- { 0x1a, KEY_CAMERA }, /* Snapshot */
- { 0x0d, KEY_LANGUAGE }, /* MTS */
-
- { 0x14, KEY_VOLUMEDOWN }, /* Vol- */
- { 0x16, KEY_VOLUMEUP }, /* Vol+ */
- { 0x17, KEY_CHANNELDOWN }, /* Ch- */
- { 0x1f, KEY_CHANNELUP }, /* Ch+ */
-
- { 0x04, KEY_REWIND }, /* << */
- { 0x0e, KEY_MENU }, /* Function */
- { 0x0c, KEY_FASTFORWARD }, /* >> */
- { 0x1d, KEY_RESTART }, /* Reset */
-};
-
-static struct rc_keymap msi_tvanywhere_plus_map = {
- .map = {
- .scan = msi_tvanywhere_plus,
- .size = ARRAY_SIZE(msi_tvanywhere_plus),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_MSI_TVANYWHERE_PLUS,
- }
-};
-
-static int __init init_rc_map_msi_tvanywhere_plus(void)
-{
- return ir_register_map(&msi_tvanywhere_plus_map);
-}
-
-static void __exit exit_rc_map_msi_tvanywhere_plus(void)
-{
- ir_unregister_map(&msi_tvanywhere_plus_map);
-}
-
-module_init(init_rc_map_msi_tvanywhere_plus)
-module_exit(exit_rc_map_msi_tvanywhere_plus)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* msi-tvanywhere.h - Keytable for msi_tvanywhere Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* MSI TV@nywhere MASTER remote */
-
-static struct ir_scancode msi_tvanywhere[] = {
- /* Keys 0 to 9 */
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- { 0x0c, KEY_MUTE },
- { 0x0f, KEY_SCREEN }, /* Full Screen */
- { 0x10, KEY_FN }, /* Funtion */
- { 0x11, KEY_TIME }, /* Time shift */
- { 0x12, KEY_POWER },
- { 0x13, KEY_MEDIA }, /* MTS */
- { 0x14, KEY_SLOW },
- { 0x16, KEY_REWIND }, /* backward << */
- { 0x17, KEY_ENTER }, /* Return */
- { 0x18, KEY_FASTFORWARD }, /* forward >> */
- { 0x1a, KEY_CHANNELUP },
- { 0x1b, KEY_VOLUMEUP },
- { 0x1e, KEY_CHANNELDOWN },
- { 0x1f, KEY_VOLUMEDOWN },
-};
-
-static struct rc_keymap msi_tvanywhere_map = {
- .map = {
- .scan = msi_tvanywhere,
- .size = ARRAY_SIZE(msi_tvanywhere),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_MSI_TVANYWHERE,
- }
-};
-
-static int __init init_rc_map_msi_tvanywhere(void)
-{
- return ir_register_map(&msi_tvanywhere_map);
-}
-
-static void __exit exit_rc_map_msi_tvanywhere(void)
-{
- ir_unregister_map(&msi_tvanywhere_map);
-}
-
-module_init(init_rc_map_msi_tvanywhere)
-module_exit(exit_rc_map_msi_tvanywhere)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* nebula.h - Keytable for nebula Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode nebula[] = {
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
- { 0x0a, KEY_TV },
- { 0x0b, KEY_AUX },
- { 0x0c, KEY_DVD },
- { 0x0d, KEY_POWER },
- { 0x0e, KEY_MHP }, /* labelled 'Picture' */
- { 0x0f, KEY_AUDIO },
- { 0x10, KEY_INFO },
- { 0x11, KEY_F13 }, /* 16:9 */
- { 0x12, KEY_F14 }, /* 14:9 */
- { 0x13, KEY_EPG },
- { 0x14, KEY_EXIT },
- { 0x15, KEY_MENU },
- { 0x16, KEY_UP },
- { 0x17, KEY_DOWN },
- { 0x18, KEY_LEFT },
- { 0x19, KEY_RIGHT },
- { 0x1a, KEY_ENTER },
- { 0x1b, KEY_CHANNELUP },
- { 0x1c, KEY_CHANNELDOWN },
- { 0x1d, KEY_VOLUMEUP },
- { 0x1e, KEY_VOLUMEDOWN },
- { 0x1f, KEY_RED },
- { 0x20, KEY_GREEN },
- { 0x21, KEY_YELLOW },
- { 0x22, KEY_BLUE },
- { 0x23, KEY_SUBTITLE },
- { 0x24, KEY_F15 }, /* AD */
- { 0x25, KEY_TEXT },
- { 0x26, KEY_MUTE },
- { 0x27, KEY_REWIND },
- { 0x28, KEY_STOP },
- { 0x29, KEY_PLAY },
- { 0x2a, KEY_FASTFORWARD },
- { 0x2b, KEY_F16 }, /* chapter */
- { 0x2c, KEY_PAUSE },
- { 0x2d, KEY_PLAY },
- { 0x2e, KEY_RECORD },
- { 0x2f, KEY_F17 }, /* picture in picture */
- { 0x30, KEY_KPPLUS }, /* zoom in */
- { 0x31, KEY_KPMINUS }, /* zoom out */
- { 0x32, KEY_F18 }, /* capture */
- { 0x33, KEY_F19 }, /* web */
- { 0x34, KEY_EMAIL },
- { 0x35, KEY_PHONE },
- { 0x36, KEY_PC },
-};
-
-static struct rc_keymap nebula_map = {
- .map = {
- .scan = nebula,
- .size = ARRAY_SIZE(nebula),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_NEBULA,
- }
-};
-
-static int __init init_rc_map_nebula(void)
-{
- return ir_register_map(&nebula_map);
-}
-
-static void __exit exit_rc_map_nebula(void)
-{
- ir_unregister_map(&nebula_map);
-}
-
-module_init(init_rc_map_nebula)
-module_exit(exit_rc_map_nebula)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* nec-terratec-cinergy-xs.h - Keytable for nec_terratec_cinergy_xs Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Terratec Cinergy Hybrid T USB XS FM
- Mauro Carvalho Chehab <mchehab@redhat.com>
- */
-
-static struct ir_scancode nec_terratec_cinergy_xs[] = {
- { 0x1441, KEY_HOME},
- { 0x1401, KEY_POWER2},
-
- { 0x1442, KEY_MENU}, /* DVD menu */
- { 0x1443, KEY_SUBTITLE},
- { 0x1444, KEY_TEXT}, /* Teletext */
- { 0x1445, KEY_DELETE},
-
- { 0x1402, KEY_1},
- { 0x1403, KEY_2},
- { 0x1404, KEY_3},
- { 0x1405, KEY_4},
- { 0x1406, KEY_5},
- { 0x1407, KEY_6},
- { 0x1408, KEY_7},
- { 0x1409, KEY_8},
- { 0x140a, KEY_9},
- { 0x140c, KEY_0},
-
- { 0x140b, KEY_TUNER}, /* AV */
- { 0x140d, KEY_MODE}, /* A.B */
-
- { 0x1446, KEY_TV},
- { 0x1447, KEY_DVD},
- { 0x1449, KEY_VIDEO},
- { 0x144a, KEY_RADIO}, /* Music */
- { 0x144b, KEY_CAMERA}, /* PIC */
-
- { 0x1410, KEY_UP},
- { 0x1411, KEY_LEFT},
- { 0x1412, KEY_OK},
- { 0x1413, KEY_RIGHT},
- { 0x1414, KEY_DOWN},
-
- { 0x140f, KEY_EPG},
- { 0x1416, KEY_INFO},
- { 0x144d, KEY_BACKSPACE},
-
- { 0x141c, KEY_VOLUMEUP},
- { 0x141e, KEY_VOLUMEDOWN},
-
- { 0x144c, KEY_PLAY},
- { 0x141d, KEY_MUTE},
-
- { 0x141b, KEY_CHANNELUP},
- { 0x141f, KEY_CHANNELDOWN},
-
- { 0x1417, KEY_RED},
- { 0x1418, KEY_GREEN},
- { 0x1419, KEY_YELLOW},
- { 0x141a, KEY_BLUE},
-
- { 0x1458, KEY_RECORD},
- { 0x1448, KEY_STOP},
- { 0x1440, KEY_PAUSE},
-
- { 0x1454, KEY_LAST},
- { 0x144e, KEY_REWIND},
- { 0x144f, KEY_FASTFORWARD},
- { 0x145c, KEY_NEXT},
-};
-
-static struct rc_keymap nec_terratec_cinergy_xs_map = {
- .map = {
- .scan = nec_terratec_cinergy_xs,
- .size = ARRAY_SIZE(nec_terratec_cinergy_xs),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_NEC_TERRATEC_CINERGY_XS,
- }
-};
-
-static int __init init_rc_map_nec_terratec_cinergy_xs(void)
-{
- return ir_register_map(&nec_terratec_cinergy_xs_map);
-}
-
-static void __exit exit_rc_map_nec_terratec_cinergy_xs(void)
-{
- ir_unregister_map(&nec_terratec_cinergy_xs_map);
-}
-
-module_init(init_rc_map_nec_terratec_cinergy_xs)
-module_exit(exit_rc_map_nec_terratec_cinergy_xs)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* norwood.h - Keytable for norwood Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Norwood Micro (non-Pro) TV Tuner
- By Peter Naulls <peter@chocky.org>
- Key comments are the functions given in the manual */
-
-static struct ir_scancode norwood[] = {
- /* Keys 0 to 9 */
- { 0x20, KEY_0 },
- { 0x21, KEY_1 },
- { 0x22, KEY_2 },
- { 0x23, KEY_3 },
- { 0x24, KEY_4 },
- { 0x25, KEY_5 },
- { 0x26, KEY_6 },
- { 0x27, KEY_7 },
- { 0x28, KEY_8 },
- { 0x29, KEY_9 },
-
- { 0x78, KEY_TUNER }, /* Video Source */
- { 0x2c, KEY_EXIT }, /* Open/Close software */
- { 0x2a, KEY_SELECT }, /* 2 Digit Select */
- { 0x69, KEY_AGAIN }, /* Recall */
-
- { 0x32, KEY_BRIGHTNESSUP }, /* Brightness increase */
- { 0x33, KEY_BRIGHTNESSDOWN }, /* Brightness decrease */
- { 0x6b, KEY_KPPLUS }, /* (not named >>>>>) */
- { 0x6c, KEY_KPMINUS }, /* (not named <<<<<) */
-
- { 0x2d, KEY_MUTE }, /* Mute */
- { 0x30, KEY_VOLUMEUP }, /* Volume up */
- { 0x31, KEY_VOLUMEDOWN }, /* Volume down */
- { 0x60, KEY_CHANNELUP }, /* Channel up */
- { 0x61, KEY_CHANNELDOWN }, /* Channel down */
-
- { 0x3f, KEY_RECORD }, /* Record */
- { 0x37, KEY_PLAY }, /* Play */
- { 0x36, KEY_PAUSE }, /* Pause */
- { 0x2b, KEY_STOP }, /* Stop */
- { 0x67, KEY_FASTFORWARD }, /* Foward */
- { 0x66, KEY_REWIND }, /* Rewind */
- { 0x3e, KEY_SEARCH }, /* Auto Scan */
- { 0x2e, KEY_CAMERA }, /* Capture Video */
- { 0x6d, KEY_MENU }, /* Show/Hide Control */
- { 0x2f, KEY_ZOOM }, /* Full Screen */
- { 0x34, KEY_RADIO }, /* FM */
- { 0x65, KEY_POWER }, /* Computer power */
-};
-
-static struct rc_keymap norwood_map = {
- .map = {
- .scan = norwood,
- .size = ARRAY_SIZE(norwood),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_NORWOOD,
- }
-};
-
-static int __init init_rc_map_norwood(void)
-{
- return ir_register_map(&norwood_map);
-}
-
-static void __exit exit_rc_map_norwood(void)
-{
- ir_unregister_map(&norwood_map);
-}
-
-module_init(init_rc_map_norwood)
-module_exit(exit_rc_map_norwood)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* npgtech.h - Keytable for npgtech Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode npgtech[] = {
- { 0x1d, KEY_SWITCHVIDEOMODE }, /* switch inputs */
- { 0x2a, KEY_FRONT },
-
- { 0x3e, KEY_1 },
- { 0x02, KEY_2 },
- { 0x06, KEY_3 },
- { 0x0a, KEY_4 },
- { 0x0e, KEY_5 },
- { 0x12, KEY_6 },
- { 0x16, KEY_7 },
- { 0x1a, KEY_8 },
- { 0x1e, KEY_9 },
- { 0x3a, KEY_0 },
- { 0x22, KEY_NUMLOCK }, /* -/-- */
- { 0x20, KEY_REFRESH },
-
- { 0x03, KEY_BRIGHTNESSDOWN },
- { 0x28, KEY_AUDIO },
- { 0x3c, KEY_CHANNELUP },
- { 0x3f, KEY_VOLUMEDOWN },
- { 0x2e, KEY_MUTE },
- { 0x3b, KEY_VOLUMEUP },
- { 0x00, KEY_CHANNELDOWN },
- { 0x07, KEY_BRIGHTNESSUP },
- { 0x2c, KEY_TEXT },
-
- { 0x37, KEY_RECORD },
- { 0x17, KEY_PLAY },
- { 0x13, KEY_PAUSE },
- { 0x26, KEY_STOP },
- { 0x18, KEY_FASTFORWARD },
- { 0x14, KEY_REWIND },
- { 0x33, KEY_ZOOM },
- { 0x32, KEY_KEYBOARD },
- { 0x30, KEY_GOTO }, /* Pointing arrow */
- { 0x36, KEY_MACRO }, /* Maximize/Minimize (yellow) */
- { 0x0b, KEY_RADIO },
- { 0x10, KEY_POWER },
-
-};
-
-static struct rc_keymap npgtech_map = {
- .map = {
- .scan = npgtech,
- .size = ARRAY_SIZE(npgtech),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_NPGTECH,
- }
-};
-
-static int __init init_rc_map_npgtech(void)
-{
- return ir_register_map(&npgtech_map);
-}
-
-static void __exit exit_rc_map_npgtech(void)
-{
- ir_unregister_map(&npgtech_map);
-}
-
-module_init(init_rc_map_npgtech)
-module_exit(exit_rc_map_npgtech)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* pctv-sedna.h - Keytable for pctv_sedna Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Mapping for the 28 key remote control as seen at
- http://www.sednacomputer.com/photo/cardbus-tv.jpg
- Pavel Mihaylov <bin@bash.info>
- Also for the remote bundled with Kozumi KTV-01C card */
-
-static struct ir_scancode pctv_sedna[] = {
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- { 0x0a, KEY_AGAIN }, /* Recall */
- { 0x0b, KEY_CHANNELUP },
- { 0x0c, KEY_VOLUMEUP },
- { 0x0d, KEY_MODE }, /* Stereo */
- { 0x0e, KEY_STOP },
- { 0x0f, KEY_PREVIOUSSONG },
- { 0x10, KEY_ZOOM },
- { 0x11, KEY_TUNER }, /* Source */
- { 0x12, KEY_POWER },
- { 0x13, KEY_MUTE },
- { 0x15, KEY_CHANNELDOWN },
- { 0x18, KEY_VOLUMEDOWN },
- { 0x19, KEY_CAMERA }, /* Snapshot */
- { 0x1a, KEY_NEXTSONG },
- { 0x1b, KEY_TIME }, /* Time Shift */
- { 0x1c, KEY_RADIO }, /* FM Radio */
- { 0x1d, KEY_RECORD },
- { 0x1e, KEY_PAUSE },
- /* additional codes for Kozumi's remote */
- { 0x14, KEY_INFO }, /* OSD */
- { 0x16, KEY_OK }, /* OK */
- { 0x17, KEY_DIGITS }, /* Plus */
- { 0x1f, KEY_PLAY }, /* Play */
-};
-
-static struct rc_keymap pctv_sedna_map = {
- .map = {
- .scan = pctv_sedna,
- .size = ARRAY_SIZE(pctv_sedna),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PCTV_SEDNA,
- }
-};
-
-static int __init init_rc_map_pctv_sedna(void)
-{
- return ir_register_map(&pctv_sedna_map);
-}
-
-static void __exit exit_rc_map_pctv_sedna(void)
-{
- ir_unregister_map(&pctv_sedna_map);
-}
-
-module_init(init_rc_map_pctv_sedna)
-module_exit(exit_rc_map_pctv_sedna)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* pinnacle-color.h - Keytable for pinnacle_color Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode pinnacle_color[] = {
- { 0x59, KEY_MUTE },
- { 0x4a, KEY_POWER },
-
- { 0x18, KEY_TEXT },
- { 0x26, KEY_TV },
- { 0x3d, KEY_PRINT },
-
- { 0x48, KEY_RED },
- { 0x04, KEY_GREEN },
- { 0x11, KEY_YELLOW },
- { 0x00, KEY_BLUE },
-
- { 0x2d, KEY_VOLUMEUP },
- { 0x1e, KEY_VOLUMEDOWN },
-
- { 0x49, KEY_MENU },
-
- { 0x16, KEY_CHANNELUP },
- { 0x17, KEY_CHANNELDOWN },
-
- { 0x20, KEY_UP },
- { 0x21, KEY_DOWN },
- { 0x22, KEY_LEFT },
- { 0x23, KEY_RIGHT },
- { 0x0d, KEY_SELECT },
-
- { 0x08, KEY_BACK },
- { 0x07, KEY_REFRESH },
-
- { 0x2f, KEY_ZOOM },
- { 0x29, KEY_RECORD },
-
- { 0x4b, KEY_PAUSE },
- { 0x4d, KEY_REWIND },
- { 0x2e, KEY_PLAY },
- { 0x4e, KEY_FORWARD },
- { 0x53, KEY_PREVIOUS },
- { 0x4c, KEY_STOP },
- { 0x54, KEY_NEXT },
-
- { 0x69, KEY_0 },
- { 0x6a, KEY_1 },
- { 0x6b, KEY_2 },
- { 0x6c, KEY_3 },
- { 0x6d, KEY_4 },
- { 0x6e, KEY_5 },
- { 0x6f, KEY_6 },
- { 0x70, KEY_7 },
- { 0x71, KEY_8 },
- { 0x72, KEY_9 },
-
- { 0x74, KEY_CHANNEL },
- { 0x0a, KEY_BACKSPACE },
-};
-
-static struct rc_keymap pinnacle_color_map = {
- .map = {
- .scan = pinnacle_color,
- .size = ARRAY_SIZE(pinnacle_color),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PINNACLE_COLOR,
- }
-};
-
-static int __init init_rc_map_pinnacle_color(void)
-{
- return ir_register_map(&pinnacle_color_map);
-}
-
-static void __exit exit_rc_map_pinnacle_color(void)
-{
- ir_unregister_map(&pinnacle_color_map);
-}
-
-module_init(init_rc_map_pinnacle_color)
-module_exit(exit_rc_map_pinnacle_color)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* pinnacle-grey.h - Keytable for pinnacle_grey Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode pinnacle_grey[] = {
- { 0x3a, KEY_0 },
- { 0x31, KEY_1 },
- { 0x32, KEY_2 },
- { 0x33, KEY_3 },
- { 0x34, KEY_4 },
- { 0x35, KEY_5 },
- { 0x36, KEY_6 },
- { 0x37, KEY_7 },
- { 0x38, KEY_8 },
- { 0x39, KEY_9 },
-
- { 0x2f, KEY_POWER },
-
- { 0x2e, KEY_P },
- { 0x1f, KEY_L },
- { 0x2b, KEY_I },
-
- { 0x2d, KEY_SCREEN },
- { 0x1e, KEY_ZOOM },
- { 0x1b, KEY_VOLUMEUP },
- { 0x0f, KEY_VOLUMEDOWN },
- { 0x17, KEY_CHANNELUP },
- { 0x1c, KEY_CHANNELDOWN },
- { 0x25, KEY_INFO },
-
- { 0x3c, KEY_MUTE },
-
- { 0x3d, KEY_LEFT },
- { 0x3b, KEY_RIGHT },
-
- { 0x3f, KEY_UP },
- { 0x3e, KEY_DOWN },
- { 0x1a, KEY_ENTER },
-
- { 0x1d, KEY_MENU },
- { 0x19, KEY_AGAIN },
- { 0x16, KEY_PREVIOUSSONG },
- { 0x13, KEY_NEXTSONG },
- { 0x15, KEY_PAUSE },
- { 0x0e, KEY_REWIND },
- { 0x0d, KEY_PLAY },
- { 0x0b, KEY_STOP },
- { 0x07, KEY_FORWARD },
- { 0x27, KEY_RECORD },
- { 0x26, KEY_TUNER },
- { 0x29, KEY_TEXT },
- { 0x2a, KEY_MEDIA },
- { 0x18, KEY_EPG },
-};
-
-static struct rc_keymap pinnacle_grey_map = {
- .map = {
- .scan = pinnacle_grey,
- .size = ARRAY_SIZE(pinnacle_grey),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PINNACLE_GREY,
- }
-};
-
-static int __init init_rc_map_pinnacle_grey(void)
-{
- return ir_register_map(&pinnacle_grey_map);
-}
-
-static void __exit exit_rc_map_pinnacle_grey(void)
-{
- ir_unregister_map(&pinnacle_grey_map);
-}
-
-module_init(init_rc_map_pinnacle_grey)
-module_exit(exit_rc_map_pinnacle_grey)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* pinnacle-pctv-hd.h - Keytable for pinnacle_pctv_hd Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Pinnacle PCTV HD 800i mini remote */
-
-static struct ir_scancode pinnacle_pctv_hd[] = {
-
- { 0x0f, KEY_1 },
- { 0x15, KEY_2 },
- { 0x10, KEY_3 },
- { 0x18, KEY_4 },
- { 0x1b, KEY_5 },
- { 0x1e, KEY_6 },
- { 0x11, KEY_7 },
- { 0x21, KEY_8 },
- { 0x12, KEY_9 },
- { 0x27, KEY_0 },
-
- { 0x24, KEY_ZOOM },
- { 0x2a, KEY_SUBTITLE },
-
- { 0x00, KEY_MUTE },
- { 0x01, KEY_ENTER }, /* Pinnacle Logo */
- { 0x39, KEY_POWER },
-
- { 0x03, KEY_VOLUMEUP },
- { 0x09, KEY_VOLUMEDOWN },
- { 0x06, KEY_CHANNELUP },
- { 0x0c, KEY_CHANNELDOWN },
-
- { 0x2d, KEY_REWIND },
- { 0x30, KEY_PLAYPAUSE },
- { 0x33, KEY_FASTFORWARD },
- { 0x3c, KEY_STOP },
- { 0x36, KEY_RECORD },
- { 0x3f, KEY_EPG }, /* Labeled "?" */
-};
-
-static struct rc_keymap pinnacle_pctv_hd_map = {
- .map = {
- .scan = pinnacle_pctv_hd,
- .size = ARRAY_SIZE(pinnacle_pctv_hd),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PINNACLE_PCTV_HD,
- }
-};
-
-static int __init init_rc_map_pinnacle_pctv_hd(void)
-{
- return ir_register_map(&pinnacle_pctv_hd_map);
-}
-
-static void __exit exit_rc_map_pinnacle_pctv_hd(void)
-{
- ir_unregister_map(&pinnacle_pctv_hd_map);
-}
-
-module_init(init_rc_map_pinnacle_pctv_hd)
-module_exit(exit_rc_map_pinnacle_pctv_hd)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Keytable for MK-F12 IR remote provided together with Pixelview
- * Ultra Pro Remote Controller. Uses NEC extended format.
- */
-static struct ir_scancode pixelview_mk12[] = {
- { 0x866b03, KEY_TUNER }, /* Timeshift */
- { 0x866b1e, KEY_POWER2 }, /* power */
-
- { 0x866b01, KEY_1 },
- { 0x866b0b, KEY_2 },
- { 0x866b1b, KEY_3 },
- { 0x866b05, KEY_4 },
- { 0x866b09, KEY_5 },
- { 0x866b15, KEY_6 },
- { 0x866b06, KEY_7 },
- { 0x866b0a, KEY_8 },
- { 0x866b12, KEY_9 },
- { 0x866b02, KEY_0 },
-
- { 0x866b13, KEY_AGAIN }, /* loop */
- { 0x866b10, KEY_DIGITS }, /* +100 */
-
- { 0x866b00, KEY_MEDIA }, /* source */
- { 0x866b18, KEY_MUTE }, /* mute */
- { 0x866b19, KEY_CAMERA }, /* snapshot */
- { 0x866b1a, KEY_SEARCH }, /* scan */
-
- { 0x866b16, KEY_CHANNELUP }, /* chn + */
- { 0x866b14, KEY_CHANNELDOWN }, /* chn - */
- { 0x866b1f, KEY_VOLUMEUP }, /* vol + */
- { 0x866b17, KEY_VOLUMEDOWN }, /* vol - */
- { 0x866b1c, KEY_ZOOM }, /* zoom */
-
- { 0x866b04, KEY_REWIND },
- { 0x866b0e, KEY_RECORD },
- { 0x866b0c, KEY_FORWARD },
-
- { 0x866b1d, KEY_STOP },
- { 0x866b08, KEY_PLAY },
- { 0x866b0f, KEY_PAUSE },
-
- { 0x866b0d, KEY_TV },
- { 0x866b07, KEY_RADIO }, /* FM */
-};
-
-static struct rc_keymap pixelview_map = {
- .map = {
- .scan = pixelview_mk12,
- .size = ARRAY_SIZE(pixelview_mk12),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_PIXELVIEW_MK12,
- }
-};
-
-static int __init init_rc_map_pixelview(void)
-{
- return ir_register_map(&pixelview_map);
-}
-
-static void __exit exit_rc_map_pixelview(void)
-{
- ir_unregister_map(&pixelview_map);
-}
-
-module_init(init_rc_map_pixelview)
-module_exit(exit_rc_map_pixelview)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* pixelview-new.h - Keytable for pixelview_new Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- Mauro Carvalho Chehab <mchehab@infradead.org>
- present on PV MPEG 8000GT
- */
-
-static struct ir_scancode pixelview_new[] = {
- { 0x3c, KEY_TIME }, /* Timeshift */
- { 0x12, KEY_POWER },
-
- { 0x3d, KEY_1 },
- { 0x38, KEY_2 },
- { 0x18, KEY_3 },
- { 0x35, KEY_4 },
- { 0x39, KEY_5 },
- { 0x15, KEY_6 },
- { 0x36, KEY_7 },
- { 0x3a, KEY_8 },
- { 0x1e, KEY_9 },
- { 0x3e, KEY_0 },
-
- { 0x1c, KEY_AGAIN }, /* LOOP */
- { 0x3f, KEY_MEDIA }, /* Source */
- { 0x1f, KEY_LAST }, /* +100 */
- { 0x1b, KEY_MUTE },
-
- { 0x17, KEY_CHANNELDOWN },
- { 0x16, KEY_CHANNELUP },
- { 0x10, KEY_VOLUMEUP },
- { 0x14, KEY_VOLUMEDOWN },
- { 0x13, KEY_ZOOM },
-
- { 0x19, KEY_CAMERA }, /* SNAPSHOT */
- { 0x1a, KEY_SEARCH }, /* scan */
-
- { 0x37, KEY_REWIND }, /* << */
- { 0x32, KEY_RECORD }, /* o (red) */
- { 0x33, KEY_FORWARD }, /* >> */
- { 0x11, KEY_STOP }, /* square */
- { 0x3b, KEY_PLAY }, /* > */
- { 0x30, KEY_PLAYPAUSE }, /* || */
-
- { 0x31, KEY_TV },
- { 0x34, KEY_RADIO },
-};
-
-static struct rc_keymap pixelview_new_map = {
- .map = {
- .scan = pixelview_new,
- .size = ARRAY_SIZE(pixelview_new),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PIXELVIEW_NEW,
- }
-};
-
-static int __init init_rc_map_pixelview_new(void)
-{
- return ir_register_map(&pixelview_new_map);
-}
-
-static void __exit exit_rc_map_pixelview_new(void)
-{
- ir_unregister_map(&pixelview_new_map);
-}
-
-module_init(init_rc_map_pixelview_new)
-module_exit(exit_rc_map_pixelview_new)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* pixelview.h - Keytable for pixelview Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode pixelview[] = {
-
- { 0x1e, KEY_POWER }, /* power */
- { 0x07, KEY_MEDIA }, /* source */
- { 0x1c, KEY_SEARCH }, /* scan */
-
-
- { 0x03, KEY_TUNER }, /* TV/FM */
-
- { 0x00, KEY_RECORD },
- { 0x08, KEY_STOP },
- { 0x11, KEY_PLAY },
-
- { 0x1a, KEY_PLAYPAUSE }, /* freeze */
- { 0x19, KEY_ZOOM }, /* zoom */
- { 0x0f, KEY_TEXT }, /* min */
-
- { 0x01, KEY_1 },
- { 0x0b, KEY_2 },
- { 0x1b, KEY_3 },
- { 0x05, KEY_4 },
- { 0x09, KEY_5 },
- { 0x15, KEY_6 },
- { 0x06, KEY_7 },
- { 0x0a, KEY_8 },
- { 0x12, KEY_9 },
- { 0x02, KEY_0 },
- { 0x10, KEY_LAST }, /* +100 */
- { 0x13, KEY_LIST }, /* recall */
-
- { 0x1f, KEY_CHANNELUP }, /* chn down */
- { 0x17, KEY_CHANNELDOWN }, /* chn up */
- { 0x16, KEY_VOLUMEUP }, /* vol down */
- { 0x14, KEY_VOLUMEDOWN }, /* vol up */
-
- { 0x04, KEY_KPMINUS }, /* <<< */
- { 0x0e, KEY_SETUP }, /* function */
- { 0x0c, KEY_KPPLUS }, /* >>> */
-
- { 0x0d, KEY_GOTO }, /* mts */
- { 0x1d, KEY_REFRESH }, /* reset */
- { 0x18, KEY_MUTE }, /* mute/unmute */
-};
-
-static struct rc_keymap pixelview_map = {
- .map = {
- .scan = pixelview,
- .size = ARRAY_SIZE(pixelview),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PIXELVIEW,
- }
-};
-
-static int __init init_rc_map_pixelview(void)
-{
- return ir_register_map(&pixelview_map);
-}
-
-static void __exit exit_rc_map_pixelview(void)
-{
- ir_unregister_map(&pixelview_map);
-}
-
-module_init(init_rc_map_pixelview)
-module_exit(exit_rc_map_pixelview)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* powercolor-real-angel.h - Keytable for powercolor_real_angel Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Remote control for Powercolor Real Angel 330
- * Daniel Fraga <fragabr@gmail.com>
- */
-
-static struct ir_scancode powercolor_real_angel[] = {
- { 0x38, KEY_SWITCHVIDEOMODE }, /* switch inputs */
- { 0x0c, KEY_MEDIA }, /* Turn ON/OFF App */
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
- { 0x0a, KEY_DIGITS }, /* single, double, tripple digit */
- { 0x29, KEY_PREVIOUS }, /* previous channel */
- { 0x12, KEY_BRIGHTNESSUP },
- { 0x13, KEY_BRIGHTNESSDOWN },
- { 0x2b, KEY_MODE }, /* stereo/mono */
- { 0x2c, KEY_TEXT }, /* teletext */
- { 0x20, KEY_CHANNELUP }, /* channel up */
- { 0x21, KEY_CHANNELDOWN }, /* channel down */
- { 0x10, KEY_VOLUMEUP }, /* volume up */
- { 0x11, KEY_VOLUMEDOWN }, /* volume down */
- { 0x0d, KEY_MUTE },
- { 0x1f, KEY_RECORD },
- { 0x17, KEY_PLAY },
- { 0x16, KEY_PAUSE },
- { 0x0b, KEY_STOP },
- { 0x27, KEY_FASTFORWARD },
- { 0x26, KEY_REWIND },
- { 0x1e, KEY_SEARCH }, /* autoscan */
- { 0x0e, KEY_CAMERA }, /* snapshot */
- { 0x2d, KEY_SETUP },
- { 0x0f, KEY_SCREEN }, /* full screen */
- { 0x14, KEY_RADIO }, /* FM radio */
- { 0x25, KEY_POWER }, /* power */
-};
-
-static struct rc_keymap powercolor_real_angel_map = {
- .map = {
- .scan = powercolor_real_angel,
- .size = ARRAY_SIZE(powercolor_real_angel),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_POWERCOLOR_REAL_ANGEL,
- }
-};
-
-static int __init init_rc_map_powercolor_real_angel(void)
-{
- return ir_register_map(&powercolor_real_angel_map);
-}
-
-static void __exit exit_rc_map_powercolor_real_angel(void)
-{
- ir_unregister_map(&powercolor_real_angel_map);
-}
-
-module_init(init_rc_map_powercolor_real_angel)
-module_exit(exit_rc_map_powercolor_real_angel)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* proteus-2309.h - Keytable for proteus_2309 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Michal Majchrowicz <mmajchrowicz@gmail.com> */
-
-static struct ir_scancode proteus_2309[] = {
- /* numeric */
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- { 0x5c, KEY_POWER }, /* power */
- { 0x20, KEY_ZOOM }, /* full screen */
- { 0x0f, KEY_BACKSPACE }, /* recall */
- { 0x1b, KEY_ENTER }, /* mute */
- { 0x41, KEY_RECORD }, /* record */
- { 0x43, KEY_STOP }, /* stop */
- { 0x16, KEY_S },
- { 0x1a, KEY_POWER2 }, /* off */
- { 0x2e, KEY_RED },
- { 0x1f, KEY_CHANNELDOWN }, /* channel - */
- { 0x1c, KEY_CHANNELUP }, /* channel + */
- { 0x10, KEY_VOLUMEDOWN }, /* volume - */
- { 0x1e, KEY_VOLUMEUP }, /* volume + */
- { 0x14, KEY_F1 },
-};
-
-static struct rc_keymap proteus_2309_map = {
- .map = {
- .scan = proteus_2309,
- .size = ARRAY_SIZE(proteus_2309),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PROTEUS_2309,
- }
-};
-
-static int __init init_rc_map_proteus_2309(void)
-{
- return ir_register_map(&proteus_2309_map);
-}
-
-static void __exit exit_rc_map_proteus_2309(void)
-{
- ir_unregister_map(&proteus_2309_map);
-}
-
-module_init(init_rc_map_proteus_2309)
-module_exit(exit_rc_map_proteus_2309)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* purpletv.h - Keytable for purpletv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode purpletv[] = {
- { 0x03, KEY_POWER },
- { 0x6f, KEY_MUTE },
- { 0x10, KEY_BACKSPACE }, /* Recall */
-
- { 0x11, KEY_0 },
- { 0x04, KEY_1 },
- { 0x05, KEY_2 },
- { 0x06, KEY_3 },
- { 0x08, KEY_4 },
- { 0x09, KEY_5 },
- { 0x0a, KEY_6 },
- { 0x0c, KEY_7 },
- { 0x0d, KEY_8 },
- { 0x0e, KEY_9 },
- { 0x12, KEY_DOT }, /* 100+ */
-
- { 0x07, KEY_VOLUMEUP },
- { 0x0b, KEY_VOLUMEDOWN },
- { 0x1a, KEY_KPPLUS },
- { 0x18, KEY_KPMINUS },
- { 0x15, KEY_UP },
- { 0x1d, KEY_DOWN },
- { 0x0f, KEY_CHANNELUP },
- { 0x13, KEY_CHANNELDOWN },
- { 0x48, KEY_ZOOM },
-
- { 0x1b, KEY_VIDEO }, /* Video source */
- { 0x1f, KEY_CAMERA }, /* Snapshot */
- { 0x49, KEY_LANGUAGE }, /* MTS Select */
- { 0x19, KEY_SEARCH }, /* Auto Scan */
-
- { 0x4b, KEY_RECORD },
- { 0x46, KEY_PLAY },
- { 0x45, KEY_PAUSE }, /* Pause */
- { 0x44, KEY_STOP },
- { 0x43, KEY_TIME }, /* Time Shift */
- { 0x17, KEY_CHANNEL }, /* SURF CH */
- { 0x40, KEY_FORWARD }, /* Forward ? */
- { 0x42, KEY_REWIND }, /* Backward ? */
-
-};
-
-static struct rc_keymap purpletv_map = {
- .map = {
- .scan = purpletv,
- .size = ARRAY_SIZE(purpletv),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PURPLETV,
- }
-};
-
-static int __init init_rc_map_purpletv(void)
-{
- return ir_register_map(&purpletv_map);
-}
-
-static void __exit exit_rc_map_purpletv(void)
-{
- ir_unregister_map(&purpletv_map);
-}
-
-module_init(init_rc_map_purpletv)
-module_exit(exit_rc_map_purpletv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* pv951.h - Keytable for pv951 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Mark Phalan <phalanm@o2.ie> */
-
-static struct ir_scancode pv951[] = {
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- { 0x12, KEY_POWER },
- { 0x10, KEY_MUTE },
- { 0x1f, KEY_VOLUMEDOWN },
- { 0x1b, KEY_VOLUMEUP },
- { 0x1a, KEY_CHANNELUP },
- { 0x1e, KEY_CHANNELDOWN },
- { 0x0e, KEY_PAGEUP },
- { 0x1d, KEY_PAGEDOWN },
- { 0x13, KEY_SOUND },
-
- { 0x18, KEY_KPPLUSMINUS }, /* CH +/- */
- { 0x16, KEY_SUBTITLE }, /* CC */
- { 0x0d, KEY_TEXT }, /* TTX */
- { 0x0b, KEY_TV }, /* AIR/CBL */
- { 0x11, KEY_PC }, /* PC/TV */
- { 0x17, KEY_OK }, /* CH RTN */
- { 0x19, KEY_MODE }, /* FUNC */
- { 0x0c, KEY_SEARCH }, /* AUTOSCAN */
-
- /* Not sure what to do with these ones! */
- { 0x0f, KEY_SELECT }, /* SOURCE */
- { 0x0a, KEY_KPPLUS }, /* +100 */
- { 0x14, KEY_EQUAL }, /* SYNC */
- { 0x1c, KEY_MEDIA }, /* PC/TV */
-};
-
-static struct rc_keymap pv951_map = {
- .map = {
- .scan = pv951,
- .size = ARRAY_SIZE(pv951),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_PV951,
- }
-};
-
-static int __init init_rc_map_pv951(void)
-{
- return ir_register_map(&pv951_map);
-}
-
-static void __exit exit_rc_map_pv951(void)
-{
- ir_unregister_map(&pv951_map);
-}
-
-module_init(init_rc_map_pv951)
-module_exit(exit_rc_map_pv951)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* rc5-hauppauge-new.h - Keytable for rc5_hauppauge_new Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/*
- * Hauppauge:the newer, gray remotes (seems there are multiple
- * slightly different versions), shipped with cx88+ivtv cards.
- *
- * This table contains the complete RC5 code, instead of just the data part
- */
-
-static struct ir_scancode rc5_hauppauge_new[] = {
- /* Keys 0 to 9 */
- { 0x1e00, KEY_0 },
- { 0x1e01, KEY_1 },
- { 0x1e02, KEY_2 },
- { 0x1e03, KEY_3 },
- { 0x1e04, KEY_4 },
- { 0x1e05, KEY_5 },
- { 0x1e06, KEY_6 },
- { 0x1e07, KEY_7 },
- { 0x1e08, KEY_8 },
- { 0x1e09, KEY_9 },
-
- { 0x1e0a, KEY_TEXT }, /* keypad asterisk as well */
- { 0x1e0b, KEY_RED }, /* red button */
- { 0x1e0c, KEY_RADIO },
- { 0x1e0d, KEY_MENU },
- { 0x1e0e, KEY_SUBTITLE }, /* also the # key */
- { 0x1e0f, KEY_MUTE },
- { 0x1e10, KEY_VOLUMEUP },
- { 0x1e11, KEY_VOLUMEDOWN },
- { 0x1e12, KEY_PREVIOUS }, /* previous channel */
- { 0x1e14, KEY_UP },
- { 0x1e15, KEY_DOWN },
- { 0x1e16, KEY_LEFT },
- { 0x1e17, KEY_RIGHT },
- { 0x1e18, KEY_VIDEO }, /* Videos */
- { 0x1e19, KEY_AUDIO }, /* Music */
- /* 0x1e1a: Pictures - presume this means
- "Multimedia Home Platform" -
- no "PICTURES" key in input.h
- */
- { 0x1e1a, KEY_MHP },
-
- { 0x1e1b, KEY_EPG }, /* Guide */
- { 0x1e1c, KEY_TV },
- { 0x1e1e, KEY_NEXTSONG }, /* skip >| */
- { 0x1e1f, KEY_EXIT }, /* back/exit */
- { 0x1e20, KEY_CHANNELUP }, /* channel / program + */
- { 0x1e21, KEY_CHANNELDOWN }, /* channel / program - */
- { 0x1e22, KEY_CHANNEL }, /* source (old black remote) */
- { 0x1e24, KEY_PREVIOUSSONG }, /* replay |< */
- { 0x1e25, KEY_ENTER }, /* OK */
- { 0x1e26, KEY_SLEEP }, /* minimize (old black remote) */
- { 0x1e29, KEY_BLUE }, /* blue key */
- { 0x1e2e, KEY_GREEN }, /* green button */
- { 0x1e30, KEY_PAUSE }, /* pause */
- { 0x1e32, KEY_REWIND }, /* backward << */
- { 0x1e34, KEY_FASTFORWARD }, /* forward >> */
- { 0x1e35, KEY_PLAY },
- { 0x1e36, KEY_STOP },
- { 0x1e37, KEY_RECORD }, /* recording */
- { 0x1e38, KEY_YELLOW }, /* yellow key */
- { 0x1e3b, KEY_SELECT }, /* top right button */
- { 0x1e3c, KEY_ZOOM }, /* full */
- { 0x1e3d, KEY_POWER }, /* system power (green button) */
-};
-
-static struct rc_keymap rc5_hauppauge_new_map = {
- .map = {
- .scan = rc5_hauppauge_new,
- .size = ARRAY_SIZE(rc5_hauppauge_new),
- .ir_type = IR_TYPE_RC5,
- .name = RC_MAP_RC5_HAUPPAUGE_NEW,
- }
-};
-
-static int __init init_rc_map_rc5_hauppauge_new(void)
-{
- return ir_register_map(&rc5_hauppauge_new_map);
-}
-
-static void __exit exit_rc_map_rc5_hauppauge_new(void)
-{
- ir_unregister_map(&rc5_hauppauge_new_map);
-}
-
-module_init(init_rc_map_rc5_hauppauge_new)
-module_exit(exit_rc_map_rc5_hauppauge_new)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* rc5-tv.h - Keytable for rc5_tv Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* generic RC5 keytable */
-/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
-/* used by old (black) Hauppauge remotes */
-
-static struct ir_scancode rc5_tv[] = {
- /* Keys 0 to 9 */
- { 0x00, KEY_0 },
- { 0x01, KEY_1 },
- { 0x02, KEY_2 },
- { 0x03, KEY_3 },
- { 0x04, KEY_4 },
- { 0x05, KEY_5 },
- { 0x06, KEY_6 },
- { 0x07, KEY_7 },
- { 0x08, KEY_8 },
- { 0x09, KEY_9 },
-
- { 0x0b, KEY_CHANNEL }, /* channel / program (japan: 11) */
- { 0x0c, KEY_POWER }, /* standby */
- { 0x0d, KEY_MUTE }, /* mute / demute */
- { 0x0f, KEY_TV }, /* display */
- { 0x10, KEY_VOLUMEUP },
- { 0x11, KEY_VOLUMEDOWN },
- { 0x12, KEY_BRIGHTNESSUP },
- { 0x13, KEY_BRIGHTNESSDOWN },
- { 0x1e, KEY_SEARCH }, /* search + */
- { 0x20, KEY_CHANNELUP }, /* channel / program + */
- { 0x21, KEY_CHANNELDOWN }, /* channel / program - */
- { 0x22, KEY_CHANNEL }, /* alt / channel */
- { 0x23, KEY_LANGUAGE }, /* 1st / 2nd language */
- { 0x26, KEY_SLEEP }, /* sleeptimer */
- { 0x2e, KEY_MENU }, /* 2nd controls (USA: menu) */
- { 0x30, KEY_PAUSE },
- { 0x32, KEY_REWIND },
- { 0x33, KEY_GOTO },
- { 0x35, KEY_PLAY },
- { 0x36, KEY_STOP },
- { 0x37, KEY_RECORD }, /* recording */
- { 0x3c, KEY_TEXT }, /* teletext submode (Japan: 12) */
- { 0x3d, KEY_SUSPEND }, /* system standby */
-
-};
-
-static struct rc_keymap rc5_tv_map = {
- .map = {
- .scan = rc5_tv,
- .size = ARRAY_SIZE(rc5_tv),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_RC5_TV,
- }
-};
-
-static int __init init_rc_map_rc5_tv(void)
-{
- return ir_register_map(&rc5_tv_map);
-}
-
-static void __exit exit_rc_map_rc5_tv(void)
-{
- ir_unregister_map(&rc5_tv_map);
-}
-
-module_init(init_rc_map_rc5_tv)
-module_exit(exit_rc_map_rc5_tv)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* rc-rc6-mce.c - Keytable for Windows Media Center RC-6 remotes for use
- * with the Media Center Edition eHome Infrared Transceiver.
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode rc6_mce[] = {
-
- { 0x800f0400, KEY_NUMERIC_0 },
- { 0x800f0401, KEY_NUMERIC_1 },
- { 0x800f0402, KEY_NUMERIC_2 },
- { 0x800f0403, KEY_NUMERIC_3 },
- { 0x800f0404, KEY_NUMERIC_4 },
- { 0x800f0405, KEY_NUMERIC_5 },
- { 0x800f0406, KEY_NUMERIC_6 },
- { 0x800f0407, KEY_NUMERIC_7 },
- { 0x800f0408, KEY_NUMERIC_8 },
- { 0x800f0409, KEY_NUMERIC_9 },
-
- { 0x800f040a, KEY_DELETE },
- { 0x800f040b, KEY_ENTER },
- { 0x800f040c, KEY_POWER }, /* PC Power */
- { 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
- { 0x800f040e, KEY_MUTE },
- { 0x800f040f, KEY_INFO },
-
- { 0x800f0410, KEY_VOLUMEUP },
- { 0x800f0411, KEY_VOLUMEDOWN },
- { 0x800f0412, KEY_CHANNELUP },
- { 0x800f0413, KEY_CHANNELDOWN },
-
- { 0x800f0414, KEY_FASTFORWARD },
- { 0x800f0415, KEY_REWIND },
- { 0x800f0416, KEY_PLAY },
- { 0x800f0417, KEY_RECORD },
- { 0x800f0418, KEY_PAUSE },
- { 0x800f046e, KEY_PLAYPAUSE },
- { 0x800f0419, KEY_STOP },
- { 0x800f041a, KEY_NEXT },
- { 0x800f041b, KEY_PREVIOUS },
- { 0x800f041c, KEY_NUMERIC_POUND },
- { 0x800f041d, KEY_NUMERIC_STAR },
-
- { 0x800f041e, KEY_UP },
- { 0x800f041f, KEY_DOWN },
- { 0x800f0420, KEY_LEFT },
- { 0x800f0421, KEY_RIGHT },
-
- { 0x800f0422, KEY_OK },
- { 0x800f0423, KEY_EXIT },
- { 0x800f0424, KEY_DVD },
- { 0x800f0425, KEY_TUNER }, /* LiveTV */
- { 0x800f0426, KEY_EPG }, /* Guide */
- { 0x800f0427, KEY_ZOOM }, /* Aspect */
-
- { 0x800f043a, KEY_BRIGHTNESSUP },
-
- { 0x800f0446, KEY_TV },
- { 0x800f0447, KEY_AUDIO }, /* My Music */
- { 0x800f0448, KEY_PVR }, /* RecordedTV */
- { 0x800f0449, KEY_CAMERA },
- { 0x800f044a, KEY_VIDEO },
- { 0x800f044c, KEY_LANGUAGE },
- { 0x800f044d, KEY_TITLE },
- { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */
-
- { 0x800f0450, KEY_RADIO },
-
- { 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
- { 0x800f045b, KEY_RED },
- { 0x800f045c, KEY_GREEN },
- { 0x800f045d, KEY_YELLOW },
- { 0x800f045e, KEY_BLUE },
-
- { 0x800f0465, KEY_POWER2 }, /* TV Power */
- { 0x800f046e, KEY_PLAYPAUSE },
- { 0x800f046f, KEY_MEDIA }, /* Start media application (NEW) */
-
- { 0x800f0480, KEY_BRIGHTNESSDOWN },
- { 0x800f0481, KEY_PLAYPAUSE },
-};
-
-static struct rc_keymap rc6_mce_map = {
- .map = {
- .scan = rc6_mce,
- .size = ARRAY_SIZE(rc6_mce),
- .ir_type = IR_TYPE_RC6,
- .name = RC_MAP_RC6_MCE,
- }
-};
-
-static int __init init_rc_map_rc6_mce(void)
-{
- return ir_register_map(&rc6_mce_map);
-}
-
-static void __exit exit_rc_map_rc6_mce(void)
-{
- ir_unregister_map(&rc6_mce_map);
-}
-
-module_init(init_rc_map_rc6_mce)
-module_exit(exit_rc_map_rc6_mce)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+++ /dev/null
-/* real-audio-220-32-keys.h - Keytable for real_audio_220_32_keys Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Zogis Real Audio 220 - 32 keys IR */
-
-static struct ir_scancode real_audio_220_32_keys[] = {
- { 0x1c, KEY_RADIO},
- { 0x12, KEY_POWER2},
-
- { 0x01, KEY_1},
- { 0x02, KEY_2},
- { 0x03, KEY_3},
- { 0x04, KEY_4},
- { 0x05, KEY_5},
- { 0x06, KEY_6},
- { 0x07, KEY_7},
- { 0x08, KEY_8},
- { 0x09, KEY_9},
- { 0x00, KEY_0},
-
- { 0x0c, KEY_VOLUMEUP},
- { 0x18, KEY_VOLUMEDOWN},
- { 0x0b, KEY_CHANNELUP},
- { 0x15, KEY_CHANNELDOWN},
- { 0x16, KEY_ENTER},
-
- { 0x11, KEY_LIST}, /* Source */
- { 0x0d, KEY_AUDIO}, /* stereo */
-
- { 0x0f, KEY_PREVIOUS}, /* Prev */
- { 0x1b, KEY_TIME}, /* Timeshift */
- { 0x1a, KEY_NEXT}, /* Next */
-
- { 0x0e, KEY_STOP},
- { 0x1f, KEY_PLAY},
- { 0x1e, KEY_PLAYPAUSE}, /* Pause */
-
- { 0x1d, KEY_RECORD},
- { 0x13, KEY_MUTE},
- { 0x19, KEY_CAMERA}, /* Snapshot */
-
-};
-
-static struct rc_keymap real_audio_220_32_keys_map = {
- .map = {
- .scan = real_audio_220_32_keys,
- .size = ARRAY_SIZE(real_audio_220_32_keys),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_REAL_AUDIO_220_32_KEYS,
- }
-};
-
-static int __init init_rc_map_real_audio_220_32_keys(void)
-{
- return ir_register_map(&real_audio_220_32_keys_map);
-}
-
-static void __exit exit_rc_map_real_audio_220_32_keys(void)
-{
- ir_unregister_map(&real_audio_220_32_keys_map);
-}
-
-module_init(init_rc_map_real_audio_220_32_keys)
-module_exit(exit_rc_map_real_audio_220_32_keys)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* rc-streamzap.c - Keytable for Streamzap PC Remote, for use
- * with the Streamzap PC Remote IR Receiver.
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode streamzap[] = {
-/*
- * The Streamzap remote is almost, but not quite, RC-5, as it has an extra
- * bit in it, which throws the in-kernel RC-5 decoder for a loop. Currently,
- * an additional RC-5-sz decoder is being deployed to support it, but it
- * may be possible to merge it back with the standard RC-5 decoder.
- */
- { 0x28c0, KEY_NUMERIC_0 },
- { 0x28c1, KEY_NUMERIC_1 },
- { 0x28c2, KEY_NUMERIC_2 },
- { 0x28c3, KEY_NUMERIC_3 },
- { 0x28c4, KEY_NUMERIC_4 },
- { 0x28c5, KEY_NUMERIC_5 },
- { 0x28c6, KEY_NUMERIC_6 },
- { 0x28c7, KEY_NUMERIC_7 },
- { 0x28c8, KEY_NUMERIC_8 },
- { 0x28c9, KEY_NUMERIC_9 },
- { 0x28ca, KEY_POWER },
- { 0x28cb, KEY_MUTE },
- { 0x28cc, KEY_CHANNELUP },
- { 0x28cd, KEY_VOLUMEUP },
- { 0x28ce, KEY_CHANNELDOWN },
- { 0x28cf, KEY_VOLUMEDOWN },
- { 0x28d0, KEY_UP },
- { 0x28d1, KEY_LEFT },
- { 0x28d2, KEY_OK },
- { 0x28d3, KEY_RIGHT },
- { 0x28d4, KEY_DOWN },
- { 0x28d5, KEY_MENU },
- { 0x28d6, KEY_EXIT },
- { 0x28d7, KEY_PLAY },
- { 0x28d8, KEY_PAUSE },
- { 0x28d9, KEY_STOP },
- { 0x28da, KEY_BACK },
- { 0x28db, KEY_FORWARD },
- { 0x28dc, KEY_RECORD },
- { 0x28dd, KEY_REWIND },
- { 0x28de, KEY_FASTFORWARD },
- { 0x28e0, KEY_RED },
- { 0x28e1, KEY_GREEN },
- { 0x28e2, KEY_YELLOW },
- { 0x28e3, KEY_BLUE },
-
-};
-
-static struct rc_keymap streamzap_map = {
- .map = {
- .scan = streamzap,
- .size = ARRAY_SIZE(streamzap),
- .ir_type = IR_TYPE_RC5_SZ,
- .name = RC_MAP_STREAMZAP,
- }
-};
-
-static int __init init_rc_map_streamzap(void)
-{
- return ir_register_map(&streamzap_map);
-}
-
-static void __exit exit_rc_map_streamzap(void)
-{
- ir_unregister_map(&streamzap_map);
-}
-
-module_init(init_rc_map_streamzap)
-module_exit(exit_rc_map_streamzap)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+++ /dev/null
-/* tbs-nec.h - Keytable for tbs_nec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode tbs_nec[] = {
- { 0x04, KEY_POWER2}, /*power*/
- { 0x14, KEY_MUTE}, /*mute*/
- { 0x07, KEY_1},
- { 0x06, KEY_2},
- { 0x05, KEY_3},
- { 0x0b, KEY_4},
- { 0x0a, KEY_5},
- { 0x09, KEY_6},
- { 0x0f, KEY_7},
- { 0x0e, KEY_8},
- { 0x0d, KEY_9},
- { 0x12, KEY_0},
- { 0x16, KEY_CHANNELUP}, /*ch+*/
- { 0x11, KEY_CHANNELDOWN},/*ch-*/
- { 0x13, KEY_VOLUMEUP}, /*vol+*/
- { 0x0c, KEY_VOLUMEDOWN},/*vol-*/
- { 0x03, KEY_RECORD}, /*rec*/
- { 0x18, KEY_PAUSE}, /*pause*/
- { 0x19, KEY_OK}, /*ok*/
- { 0x1a, KEY_CAMERA}, /* snapshot */
- { 0x01, KEY_UP},
- { 0x10, KEY_LEFT},
- { 0x02, KEY_RIGHT},
- { 0x08, KEY_DOWN},
- { 0x15, KEY_FAVORITES},
- { 0x17, KEY_SUBTITLE},
- { 0x1d, KEY_ZOOM},
- { 0x1f, KEY_EXIT},
- { 0x1e, KEY_MENU},
- { 0x1c, KEY_EPG},
- { 0x00, KEY_PREVIOUS},
- { 0x1b, KEY_MODE},
-};
-
-static struct rc_keymap tbs_nec_map = {
- .map = {
- .scan = tbs_nec,
- .size = ARRAY_SIZE(tbs_nec),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_TBS_NEC,
- }
-};
-
-static int __init init_rc_map_tbs_nec(void)
-{
- return ir_register_map(&tbs_nec_map);
-}
-
-static void __exit exit_rc_map_tbs_nec(void)
-{
- ir_unregister_map(&tbs_nec_map);
-}
-
-module_init(init_rc_map_tbs_nec)
-module_exit(exit_rc_map_tbs_nec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* terratec-cinergy-xs.h - Keytable for terratec_cinergy_xs Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Terratec Cinergy Hybrid T USB XS
- Devin Heitmueller <dheitmueller@linuxtv.org>
- */
-
-static struct ir_scancode terratec_cinergy_xs[] = {
- { 0x41, KEY_HOME},
- { 0x01, KEY_POWER},
- { 0x42, KEY_MENU},
- { 0x02, KEY_1},
- { 0x03, KEY_2},
- { 0x04, KEY_3},
- { 0x43, KEY_SUBTITLE},
- { 0x05, KEY_4},
- { 0x06, KEY_5},
- { 0x07, KEY_6},
- { 0x44, KEY_TEXT},
- { 0x08, KEY_7},
- { 0x09, KEY_8},
- { 0x0a, KEY_9},
- { 0x45, KEY_DELETE},
- { 0x0b, KEY_TUNER},
- { 0x0c, KEY_0},
- { 0x0d, KEY_MODE},
- { 0x46, KEY_TV},
- { 0x47, KEY_DVD},
- { 0x49, KEY_VIDEO},
- { 0x4b, KEY_AUX},
- { 0x10, KEY_UP},
- { 0x11, KEY_LEFT},
- { 0x12, KEY_OK},
- { 0x13, KEY_RIGHT},
- { 0x14, KEY_DOWN},
- { 0x0f, KEY_EPG},
- { 0x16, KEY_INFO},
- { 0x4d, KEY_BACKSPACE},
- { 0x1c, KEY_VOLUMEUP},
- { 0x4c, KEY_PLAY},
- { 0x1b, KEY_CHANNELUP},
- { 0x1e, KEY_VOLUMEDOWN},
- { 0x1d, KEY_MUTE},
- { 0x1f, KEY_CHANNELDOWN},
- { 0x17, KEY_RED},
- { 0x18, KEY_GREEN},
- { 0x19, KEY_YELLOW},
- { 0x1a, KEY_BLUE},
- { 0x58, KEY_RECORD},
- { 0x48, KEY_STOP},
- { 0x40, KEY_PAUSE},
- { 0x54, KEY_LAST},
- { 0x4e, KEY_REWIND},
- { 0x4f, KEY_FASTFORWARD},
- { 0x5c, KEY_NEXT},
-};
-
-static struct rc_keymap terratec_cinergy_xs_map = {
- .map = {
- .scan = terratec_cinergy_xs,
- .size = ARRAY_SIZE(terratec_cinergy_xs),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_TERRATEC_CINERGY_XS,
- }
-};
-
-static int __init init_rc_map_terratec_cinergy_xs(void)
-{
- return ir_register_map(&terratec_cinergy_xs_map);
-}
-
-static void __exit exit_rc_map_terratec_cinergy_xs(void)
-{
- ir_unregister_map(&terratec_cinergy_xs_map);
-}
-
-module_init(init_rc_map_terratec_cinergy_xs)
-module_exit(exit_rc_map_terratec_cinergy_xs)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * TerraTec remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* TerraTec slim remote, 7 rows, 4 columns. */
-/* Uses NEC extended 0x02bd. */
-static struct ir_scancode terratec_slim[] = {
- { 0x02bd00, KEY_1 },
- { 0x02bd01, KEY_2 },
- { 0x02bd02, KEY_3 },
- { 0x02bd03, KEY_4 },
- { 0x02bd04, KEY_5 },
- { 0x02bd05, KEY_6 },
- { 0x02bd06, KEY_7 },
- { 0x02bd07, KEY_8 },
- { 0x02bd08, KEY_9 },
- { 0x02bd09, KEY_0 },
- { 0x02bd0a, KEY_MUTE },
- { 0x02bd0b, KEY_NEW }, /* symbol: PIP */
- { 0x02bd0e, KEY_VOLUMEDOWN },
- { 0x02bd0f, KEY_PLAYPAUSE },
- { 0x02bd10, KEY_RIGHT },
- { 0x02bd11, KEY_LEFT },
- { 0x02bd12, KEY_UP },
- { 0x02bd13, KEY_DOWN },
- { 0x02bd15, KEY_OK },
- { 0x02bd16, KEY_STOP },
- { 0x02bd17, KEY_CAMERA }, /* snapshot */
- { 0x02bd18, KEY_CHANNELUP },
- { 0x02bd19, KEY_RECORD },
- { 0x02bd1a, KEY_CHANNELDOWN },
- { 0x02bd1c, KEY_ESC },
- { 0x02bd1f, KEY_VOLUMEUP },
- { 0x02bd44, KEY_EPG },
- { 0x02bd45, KEY_POWER2 }, /* [red power button] */
-};
-
-static struct rc_keymap terratec_slim_map = {
- .map = {
- .scan = terratec_slim,
- .size = ARRAY_SIZE(terratec_slim),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_TERRATEC_SLIM,
- }
-};
-
-static int __init init_rc_map_terratec_slim(void)
-{
- return ir_register_map(&terratec_slim_map);
-}
-
-static void __exit exit_rc_map_terratec_slim(void)
-{
- ir_unregister_map(&terratec_slim_map);
-}
-
-module_init(init_rc_map_terratec_slim)
-module_exit(exit_rc_map_terratec_slim)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/* tevii-nec.h - Keytable for tevii_nec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode tevii_nec[] = {
- { 0x0a, KEY_POWER2},
- { 0x0c, KEY_MUTE},
- { 0x11, KEY_1},
- { 0x12, KEY_2},
- { 0x13, KEY_3},
- { 0x14, KEY_4},
- { 0x15, KEY_5},
- { 0x16, KEY_6},
- { 0x17, KEY_7},
- { 0x18, KEY_8},
- { 0x19, KEY_9},
- { 0x10, KEY_0},
- { 0x1c, KEY_MENU},
- { 0x0f, KEY_VOLUMEDOWN},
- { 0x1a, KEY_LAST},
- { 0x0e, KEY_OPEN},
- { 0x04, KEY_RECORD},
- { 0x09, KEY_VOLUMEUP},
- { 0x08, KEY_CHANNELUP},
- { 0x07, KEY_PVR},
- { 0x0b, KEY_TIME},
- { 0x02, KEY_RIGHT},
- { 0x03, KEY_LEFT},
- { 0x00, KEY_UP},
- { 0x1f, KEY_OK},
- { 0x01, KEY_DOWN},
- { 0x05, KEY_TUNER},
- { 0x06, KEY_CHANNELDOWN},
- { 0x40, KEY_PLAYPAUSE},
- { 0x1e, KEY_REWIND},
- { 0x1b, KEY_FAVORITES},
- { 0x1d, KEY_BACK},
- { 0x4d, KEY_FASTFORWARD},
- { 0x44, KEY_EPG},
- { 0x4c, KEY_INFO},
- { 0x41, KEY_AB},
- { 0x43, KEY_AUDIO},
- { 0x45, KEY_SUBTITLE},
- { 0x4a, KEY_LIST},
- { 0x46, KEY_F1},
- { 0x47, KEY_F2},
- { 0x5e, KEY_F3},
- { 0x5c, KEY_F4},
- { 0x52, KEY_F5},
- { 0x5a, KEY_F6},
- { 0x56, KEY_MODE},
- { 0x58, KEY_SWITCHVIDEOMODE},
-};
-
-static struct rc_keymap tevii_nec_map = {
- .map = {
- .scan = tevii_nec,
- .size = ARRAY_SIZE(tevii_nec),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_TEVII_NEC,
- }
-};
-
-static int __init init_rc_map_tevii_nec(void)
-{
- return ir_register_map(&tevii_nec_map);
-}
-
-static void __exit exit_rc_map_tevii_nec(void)
-{
- ir_unregister_map(&tevii_nec_map);
-}
-
-module_init(init_rc_map_tevii_nec)
-module_exit(exit_rc_map_tevii_nec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * Total Media In Hand remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* Uses NEC extended 0x02bd */
-static struct ir_scancode total_media_in_hand[] = {
- { 0x02bd00, KEY_1 },
- { 0x02bd01, KEY_2 },
- { 0x02bd02, KEY_3 },
- { 0x02bd03, KEY_4 },
- { 0x02bd04, KEY_5 },
- { 0x02bd05, KEY_6 },
- { 0x02bd06, KEY_7 },
- { 0x02bd07, KEY_8 },
- { 0x02bd08, KEY_9 },
- { 0x02bd09, KEY_0 },
- { 0x02bd0a, KEY_MUTE },
- { 0x02bd0b, KEY_CYCLEWINDOWS }, /* yellow, [min / max] */
- { 0x02bd0c, KEY_VIDEO }, /* TV / AV */
- { 0x02bd0e, KEY_VOLUMEDOWN },
- { 0x02bd0f, KEY_TIME }, /* TimeShift */
- { 0x02bd10, KEY_RIGHT }, /* right arrow */
- { 0x02bd11, KEY_LEFT }, /* left arrow */
- { 0x02bd12, KEY_UP }, /* up arrow */
- { 0x02bd13, KEY_DOWN }, /* down arrow */
- { 0x02bd14, KEY_POWER2 }, /* [red] */
- { 0x02bd15, KEY_OK }, /* OK */
- { 0x02bd16, KEY_STOP },
- { 0x02bd17, KEY_CAMERA }, /* Snapshot */
- { 0x02bd18, KEY_CHANNELUP },
- { 0x02bd19, KEY_RECORD },
- { 0x02bd1a, KEY_CHANNELDOWN },
- { 0x02bd1c, KEY_ESC }, /* Esc */
- { 0x02bd1e, KEY_PLAY },
- { 0x02bd1f, KEY_VOLUMEUP },
- { 0x02bd40, KEY_PAUSE },
- { 0x02bd41, KEY_FASTFORWARD }, /* FF >> */
- { 0x02bd42, KEY_REWIND }, /* FR << */
- { 0x02bd43, KEY_ZOOM }, /* [window + mouse pointer] */
- { 0x02bd44, KEY_SHUFFLE }, /* Shuffle */
- { 0x02bd45, KEY_INFO }, /* [red (I)] */
-};
-
-static struct rc_keymap total_media_in_hand_map = {
- .map = {
- .scan = total_media_in_hand,
- .size = ARRAY_SIZE(total_media_in_hand),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_TOTAL_MEDIA_IN_HAND,
- }
-};
-
-static int __init init_rc_map_total_media_in_hand(void)
-{
- return ir_register_map(&total_media_in_hand_map);
-}
-
-static void __exit exit_rc_map_total_media_in_hand(void)
-{
- ir_unregister_map(&total_media_in_hand_map);
-}
-
-module_init(init_rc_map_total_media_in_hand)
-module_exit(exit_rc_map_total_media_in_hand)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/*
- * TrekStor remote controller keytable
- *
- * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <media/rc-map.h>
-
-/* TrekStor DVB-T USB Stick remote controller. */
-/* Imported from af9015.h.
- Initial keytable was from Marc Schneider <macke@macke.org> */
-static struct ir_scancode trekstor[] = {
- { 0x0084, KEY_0 },
- { 0x0085, KEY_MUTE }, /* Mute */
- { 0x0086, KEY_HOMEPAGE }, /* Home */
- { 0x0087, KEY_UP }, /* Up */
- { 0x0088, KEY_OK }, /* OK */
- { 0x0089, KEY_RIGHT }, /* Right */
- { 0x008a, KEY_FASTFORWARD }, /* Fast forward */
- { 0x008b, KEY_VOLUMEUP }, /* Volume + */
- { 0x008c, KEY_DOWN }, /* Down */
- { 0x008d, KEY_PLAY }, /* Play/Pause */
- { 0x008e, KEY_STOP }, /* Stop */
- { 0x008f, KEY_EPG }, /* Info/EPG */
- { 0x0090, KEY_7 },
- { 0x0091, KEY_4 },
- { 0x0092, KEY_1 },
- { 0x0093, KEY_CHANNELDOWN }, /* Channel - */
- { 0x0094, KEY_8 },
- { 0x0095, KEY_5 },
- { 0x0096, KEY_2 },
- { 0x0097, KEY_CHANNELUP }, /* Channel + */
- { 0x0098, KEY_9 },
- { 0x0099, KEY_6 },
- { 0x009a, KEY_3 },
- { 0x009b, KEY_VOLUMEDOWN }, /* Volume - */
- { 0x009c, KEY_TV }, /* TV */
- { 0x009d, KEY_RECORD }, /* Record */
- { 0x009e, KEY_REWIND }, /* Rewind */
- { 0x009f, KEY_LEFT }, /* Left */
-};
-
-static struct rc_keymap trekstor_map = {
- .map = {
- .scan = trekstor,
- .size = ARRAY_SIZE(trekstor),
- .ir_type = IR_TYPE_NEC,
- .name = RC_MAP_TREKSTOR,
- }
-};
-
-static int __init init_rc_map_trekstor(void)
-{
- return ir_register_map(&trekstor_map);
-}
-
-static void __exit exit_rc_map_trekstor(void)
-{
- ir_unregister_map(&trekstor_map);
-}
-
-module_init(init_rc_map_trekstor)
-module_exit(exit_rc_map_trekstor)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+++ /dev/null
-/* tt-1500.h - Keytable for tt_1500 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* for the Technotrend 1500 bundled remotes (grey and black): */
-
-static struct ir_scancode tt_1500[] = {
- { 0x01, KEY_POWER },
- { 0x02, KEY_SHUFFLE }, /* ? double-arrow key */
- { 0x03, KEY_1 },
- { 0x04, KEY_2 },
- { 0x05, KEY_3 },
- { 0x06, KEY_4 },
- { 0x07, KEY_5 },
- { 0x08, KEY_6 },
- { 0x09, KEY_7 },
- { 0x0a, KEY_8 },
- { 0x0b, KEY_9 },
- { 0x0c, KEY_0 },
- { 0x0d, KEY_UP },
- { 0x0e, KEY_LEFT },
- { 0x0f, KEY_OK },
- { 0x10, KEY_RIGHT },
- { 0x11, KEY_DOWN },
- { 0x12, KEY_INFO },
- { 0x13, KEY_EXIT },
- { 0x14, KEY_RED },
- { 0x15, KEY_GREEN },
- { 0x16, KEY_YELLOW },
- { 0x17, KEY_BLUE },
- { 0x18, KEY_MUTE },
- { 0x19, KEY_TEXT },
- { 0x1a, KEY_MODE }, /* ? TV/Radio */
- { 0x21, KEY_OPTION },
- { 0x22, KEY_EPG },
- { 0x23, KEY_CHANNELUP },
- { 0x24, KEY_CHANNELDOWN },
- { 0x25, KEY_VOLUMEUP },
- { 0x26, KEY_VOLUMEDOWN },
- { 0x27, KEY_SETUP },
- { 0x3a, KEY_RECORD }, /* these keys are only in the black remote */
- { 0x3b, KEY_PLAY },
- { 0x3c, KEY_STOP },
- { 0x3d, KEY_REWIND },
- { 0x3e, KEY_PAUSE },
- { 0x3f, KEY_FORWARD },
-};
-
-static struct rc_keymap tt_1500_map = {
- .map = {
- .scan = tt_1500,
- .size = ARRAY_SIZE(tt_1500),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_TT_1500,
- }
-};
-
-static int __init init_rc_map_tt_1500(void)
-{
- return ir_register_map(&tt_1500_map);
-}
-
-static void __exit exit_rc_map_tt_1500(void)
-{
- ir_unregister_map(&tt_1500_map);
-}
-
-module_init(init_rc_map_tt_1500)
-module_exit(exit_rc_map_tt_1500)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-#include <media/rc-map.h>
-
-static struct ir_scancode twinhan_vp1027[] = {
- { 0x16, KEY_POWER2 },
- { 0x17, KEY_FAVORITES },
- { 0x0f, KEY_TEXT },
- { 0x48, KEY_INFO},
- { 0x1c, KEY_EPG },
- { 0x04, KEY_LIST },
-
- { 0x03, KEY_1 },
- { 0x01, KEY_2 },
- { 0x06, KEY_3 },
- { 0x09, KEY_4 },
- { 0x1d, KEY_5 },
- { 0x1f, KEY_6 },
- { 0x0d, KEY_7 },
- { 0x19, KEY_8 },
- { 0x1b, KEY_9 },
- { 0x15, KEY_0 },
-
- { 0x0c, KEY_CANCEL },
- { 0x4a, KEY_CLEAR },
- { 0x13, KEY_BACKSPACE },
- { 0x00, KEY_TAB },
-
- { 0x4b, KEY_UP },
- { 0x51, KEY_DOWN },
- { 0x4e, KEY_LEFT },
- { 0x52, KEY_RIGHT },
- { 0x4f, KEY_ENTER },
-
- { 0x1e, KEY_VOLUMEUP },
- { 0x0a, KEY_VOLUMEDOWN },
- { 0x02, KEY_CHANNELDOWN },
- { 0x05, KEY_CHANNELUP },
- { 0x11, KEY_RECORD },
-
- { 0x14, KEY_PLAY },
- { 0x4c, KEY_PAUSE },
- { 0x1a, KEY_STOP },
- { 0x40, KEY_REWIND },
- { 0x12, KEY_FASTFORWARD },
- { 0x41, KEY_PREVIOUSSONG },
- { 0x42, KEY_NEXTSONG },
- { 0x54, KEY_SAVE },
- { 0x50, KEY_LANGUAGE },
- { 0x47, KEY_MEDIA },
- { 0x4d, KEY_SCREEN },
- { 0x43, KEY_SUBTITLE },
- { 0x10, KEY_MUTE },
- { 0x49, KEY_AUDIO },
- { 0x07, KEY_SLEEP },
- { 0x08, KEY_VIDEO },
- { 0x0e, KEY_AGAIN },
- { 0x45, KEY_EQUAL },
- { 0x46, KEY_MINUS },
- { 0x18, KEY_RED },
- { 0x53, KEY_GREEN },
- { 0x5e, KEY_YELLOW },
- { 0x5f, KEY_BLUE },
-};
-
-static struct rc_keymap twinhan_vp1027_map = {
- .map = {
- .scan = twinhan_vp1027,
- .size = ARRAY_SIZE(twinhan_vp1027),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_TWINHAN_VP1027_DVBS,
- }
-};
-
-static int __init init_rc_map_twinhan_vp1027(void)
-{
- return ir_register_map(&twinhan_vp1027_map);
-}
-
-static void __exit exit_rc_map_twinhan_vp1027(void)
-{
- ir_unregister_map(&twinhan_vp1027_map);
-}
-
-module_init(init_rc_map_twinhan_vp1027)
-module_exit(exit_rc_map_twinhan_vp1027)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Sergey Ivanov <123kash@gmail.com>");
+++ /dev/null
-/* videomate-s350.h - Keytable for videomate_s350 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode videomate_s350[] = {
- { 0x00, KEY_TV},
- { 0x01, KEY_DVD},
- { 0x04, KEY_RECORD},
- { 0x05, KEY_VIDEO}, /* TV/Video */
- { 0x07, KEY_STOP},
- { 0x08, KEY_PLAYPAUSE},
- { 0x0a, KEY_REWIND},
- { 0x0f, KEY_FASTFORWARD},
- { 0x10, KEY_CHANNELUP},
- { 0x12, KEY_VOLUMEUP},
- { 0x13, KEY_CHANNELDOWN},
- { 0x14, KEY_MUTE},
- { 0x15, KEY_VOLUMEDOWN},
- { 0x16, KEY_1},
- { 0x17, KEY_2},
- { 0x18, KEY_3},
- { 0x19, KEY_4},
- { 0x1a, KEY_5},
- { 0x1b, KEY_6},
- { 0x1c, KEY_7},
- { 0x1d, KEY_8},
- { 0x1e, KEY_9},
- { 0x1f, KEY_0},
- { 0x21, KEY_SLEEP},
- { 0x24, KEY_ZOOM},
- { 0x25, KEY_LAST}, /* Recall */
- { 0x26, KEY_SUBTITLE}, /* CC */
- { 0x27, KEY_LANGUAGE}, /* MTS */
- { 0x29, KEY_CHANNEL}, /* SURF */
- { 0x2b, KEY_A},
- { 0x2c, KEY_B},
- { 0x2f, KEY_CAMERA}, /* Snapshot */
- { 0x23, KEY_RADIO},
- { 0x02, KEY_PREVIOUSSONG},
- { 0x06, KEY_NEXTSONG},
- { 0x03, KEY_EPG},
- { 0x09, KEY_SETUP},
- { 0x22, KEY_BACKSPACE},
- { 0x0c, KEY_UP},
- { 0x0e, KEY_DOWN},
- { 0x0b, KEY_LEFT},
- { 0x0d, KEY_RIGHT},
- { 0x11, KEY_ENTER},
- { 0x20, KEY_TEXT},
-};
-
-static struct rc_keymap videomate_s350_map = {
- .map = {
- .scan = videomate_s350,
- .size = ARRAY_SIZE(videomate_s350),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_VIDEOMATE_S350,
- }
-};
-
-static int __init init_rc_map_videomate_s350(void)
-{
- return ir_register_map(&videomate_s350_map);
-}
-
-static void __exit exit_rc_map_videomate_s350(void)
-{
- ir_unregister_map(&videomate_s350_map);
-}
-
-module_init(init_rc_map_videomate_s350)
-module_exit(exit_rc_map_videomate_s350)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* videomate-tv-pvr.h - Keytable for videomate_tv_pvr Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode videomate_tv_pvr[] = {
- { 0x14, KEY_MUTE },
- { 0x24, KEY_ZOOM },
-
- { 0x01, KEY_DVD },
- { 0x23, KEY_RADIO },
- { 0x00, KEY_TV },
-
- { 0x0a, KEY_REWIND },
- { 0x08, KEY_PLAYPAUSE },
- { 0x0f, KEY_FORWARD },
-
- { 0x02, KEY_PREVIOUS },
- { 0x07, KEY_STOP },
- { 0x06, KEY_NEXT },
-
- { 0x0c, KEY_UP },
- { 0x0e, KEY_DOWN },
- { 0x0b, KEY_LEFT },
- { 0x0d, KEY_RIGHT },
- { 0x11, KEY_OK },
-
- { 0x03, KEY_MENU },
- { 0x09, KEY_SETUP },
- { 0x05, KEY_VIDEO },
- { 0x22, KEY_CHANNEL },
-
- { 0x12, KEY_VOLUMEUP },
- { 0x15, KEY_VOLUMEDOWN },
- { 0x10, KEY_CHANNELUP },
- { 0x13, KEY_CHANNELDOWN },
-
- { 0x04, KEY_RECORD },
-
- { 0x16, KEY_1 },
- { 0x17, KEY_2 },
- { 0x18, KEY_3 },
- { 0x19, KEY_4 },
- { 0x1a, KEY_5 },
- { 0x1b, KEY_6 },
- { 0x1c, KEY_7 },
- { 0x1d, KEY_8 },
- { 0x1e, KEY_9 },
- { 0x1f, KEY_0 },
-
- { 0x20, KEY_LANGUAGE },
- { 0x21, KEY_SLEEP },
-};
-
-static struct rc_keymap videomate_tv_pvr_map = {
- .map = {
- .scan = videomate_tv_pvr,
- .size = ARRAY_SIZE(videomate_tv_pvr),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_VIDEOMATE_TV_PVR,
- }
-};
-
-static int __init init_rc_map_videomate_tv_pvr(void)
-{
- return ir_register_map(&videomate_tv_pvr_map);
-}
-
-static void __exit exit_rc_map_videomate_tv_pvr(void)
-{
- ir_unregister_map(&videomate_tv_pvr_map);
-}
-
-module_init(init_rc_map_videomate_tv_pvr)
-module_exit(exit_rc_map_videomate_tv_pvr)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* winfast-usbii-deluxe.h - Keytable for winfast_usbii_deluxe Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Leadtek Winfast TV USB II Deluxe remote
- Magnus Alm <magnus.alm@gmail.com>
- */
-
-static struct ir_scancode winfast_usbii_deluxe[] = {
- { 0x62, KEY_0},
- { 0x75, KEY_1},
- { 0x76, KEY_2},
- { 0x77, KEY_3},
- { 0x79, KEY_4},
- { 0x7a, KEY_5},
- { 0x7b, KEY_6},
- { 0x7d, KEY_7},
- { 0x7e, KEY_8},
- { 0x7f, KEY_9},
-
- { 0x38, KEY_CAMERA}, /* SNAPSHOT */
- { 0x37, KEY_RECORD}, /* RECORD */
- { 0x35, KEY_TIME}, /* TIMESHIFT */
-
- { 0x74, KEY_VOLUMEUP}, /* VOLUMEUP */
- { 0x78, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */
- { 0x64, KEY_MUTE}, /* MUTE */
-
- { 0x21, KEY_CHANNEL}, /* SURF */
- { 0x7c, KEY_CHANNELUP}, /* CHANNELUP */
- { 0x60, KEY_CHANNELDOWN}, /* CHANNELDOWN */
- { 0x61, KEY_LAST}, /* LAST CHANNEL (RECALL) */
-
- { 0x72, KEY_VIDEO}, /* INPUT MODES (TV/FM) */
-
- { 0x70, KEY_POWER2}, /* TV ON/OFF */
-
- { 0x39, KEY_CYCLEWINDOWS}, /* MINIMIZE (BOSS) */
- { 0x3a, KEY_NEW}, /* PIP */
- { 0x73, KEY_ZOOM}, /* FULLSECREEN */
-
- { 0x66, KEY_INFO}, /* OSD (DISPLAY) */
-
- { 0x31, KEY_DOT}, /* '.' */
- { 0x63, KEY_ENTER}, /* ENTER */
-
-};
-
-static struct rc_keymap winfast_usbii_deluxe_map = {
- .map = {
- .scan = winfast_usbii_deluxe,
- .size = ARRAY_SIZE(winfast_usbii_deluxe),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_WINFAST_USBII_DELUXE,
- }
-};
-
-static int __init init_rc_map_winfast_usbii_deluxe(void)
-{
- return ir_register_map(&winfast_usbii_deluxe_map);
-}
-
-static void __exit exit_rc_map_winfast_usbii_deluxe(void)
-{
- ir_unregister_map(&winfast_usbii_deluxe_map);
-}
-
-module_init(init_rc_map_winfast_usbii_deluxe)
-module_exit(exit_rc_map_winfast_usbii_deluxe)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/* winfast.h - Keytable for winfast Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
-
-static struct ir_scancode winfast[] = {
- /* Keys 0 to 9 */
- { 0x12, KEY_0 },
- { 0x05, KEY_1 },
- { 0x06, KEY_2 },
- { 0x07, KEY_3 },
- { 0x09, KEY_4 },
- { 0x0a, KEY_5 },
- { 0x0b, KEY_6 },
- { 0x0d, KEY_7 },
- { 0x0e, KEY_8 },
- { 0x0f, KEY_9 },
-
- { 0x00, KEY_POWER },
- { 0x1b, KEY_AUDIO }, /* Audio Source */
- { 0x02, KEY_TUNER }, /* TV/FM, not on Y0400052 */
- { 0x1e, KEY_VIDEO }, /* Video Source */
- { 0x16, KEY_INFO }, /* Display information */
- { 0x04, KEY_VOLUMEUP },
- { 0x08, KEY_VOLUMEDOWN },
- { 0x0c, KEY_CHANNELUP },
- { 0x10, KEY_CHANNELDOWN },
- { 0x03, KEY_ZOOM }, /* fullscreen */
- { 0x1f, KEY_TEXT }, /* closed caption/teletext */
- { 0x20, KEY_SLEEP },
- { 0x29, KEY_CLEAR }, /* boss key */
- { 0x14, KEY_MUTE },
- { 0x2b, KEY_RED },
- { 0x2c, KEY_GREEN },
- { 0x2d, KEY_YELLOW },
- { 0x2e, KEY_BLUE },
- { 0x18, KEY_KPPLUS }, /* fine tune + , not on Y040052 */
- { 0x19, KEY_KPMINUS }, /* fine tune - , not on Y040052 */
- { 0x2a, KEY_MEDIA }, /* PIP (Picture in picture */
- { 0x21, KEY_DOT },
- { 0x13, KEY_ENTER },
- { 0x11, KEY_LAST }, /* Recall (last channel */
- { 0x22, KEY_PREVIOUS },
- { 0x23, KEY_PLAYPAUSE },
- { 0x24, KEY_NEXT },
- { 0x25, KEY_TIME }, /* Time Shifting */
- { 0x26, KEY_STOP },
- { 0x27, KEY_RECORD },
- { 0x28, KEY_SAVE }, /* Screenshot */
- { 0x2f, KEY_MENU },
- { 0x30, KEY_CANCEL },
- { 0x31, KEY_CHANNEL }, /* Channel Surf */
- { 0x32, KEY_SUBTITLE },
- { 0x33, KEY_LANGUAGE },
- { 0x34, KEY_REWIND },
- { 0x35, KEY_FASTFORWARD },
- { 0x36, KEY_TV },
- { 0x37, KEY_RADIO }, /* FM */
- { 0x38, KEY_DVD },
-
- { 0x1a, KEY_MODE}, /* change to MCE mode on Y04G0051 */
- { 0x3e, KEY_F21 }, /* MCE +VOL, on Y04G0033 */
- { 0x3a, KEY_F22 }, /* MCE -VOL, on Y04G0033 */
- { 0x3b, KEY_F23 }, /* MCE +CH, on Y04G0033 */
- { 0x3f, KEY_F24 } /* MCE -CH, on Y04G0033 */
-};
-
-static struct rc_keymap winfast_map = {
- .map = {
- .scan = winfast,
- .size = ARRAY_SIZE(winfast),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_WINFAST,
- }
-};
-
-static int __init init_rc_map_winfast(void)
-{
- return ir_register_map(&winfast_map);
-}
-
-static void __exit exit_rc_map_winfast(void)
-{
- ir_unregister_map(&winfast_map);
-}
-
-module_init(init_rc_map_winfast)
-module_exit(exit_rc_map_winfast)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+++ /dev/null
-/*
- * LIRC base driver
- *
- * by Artur Lipowski <alipowski@interia.pl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/ioctl.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/completion.h>
-#include <linux/mutex.h>
-#include <linux/wait.h>
-#include <linux/unistd.h>
-#include <linux/kthread.h>
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/cdev.h>
-
-#include <media/lirc.h>
-#include <media/lirc_dev.h>
-
-static int debug;
-
-#define IRCTL_DEV_NAME "BaseRemoteCtl"
-#define NOPLUG -1
-#define LOGHEAD "lirc_dev (%s[%d]): "
-
-static dev_t lirc_base_dev;
-
-struct irctl {
- struct lirc_driver d;
- int attached;
- int open;
-
- struct mutex irctl_lock;
- struct lirc_buffer *buf;
- unsigned int chunk_size;
-
- struct task_struct *task;
- long jiffies_to_wait;
-};
-
-static DEFINE_MUTEX(lirc_dev_lock);
-
-static struct irctl *irctls[MAX_IRCTL_DEVICES];
-static struct cdev cdevs[MAX_IRCTL_DEVICES];
-
-/* Only used for sysfs but defined to void otherwise */
-static struct class *lirc_class;
-
-/* helper function
- * initializes the irctl structure
- */
-static void lirc_irctl_init(struct irctl *ir)
-{
- mutex_init(&ir->irctl_lock);
- ir->d.minor = NOPLUG;
-}
-
-static void lirc_irctl_cleanup(struct irctl *ir)
-{
- dev_dbg(ir->d.dev, LOGHEAD "cleaning up\n", ir->d.name, ir->d.minor);
-
- device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
-
- if (ir->buf != ir->d.rbuf) {
- lirc_buffer_free(ir->buf);
- kfree(ir->buf);
- }
- ir->buf = NULL;
-}
-
-/* helper function
- * reads key codes from driver and puts them into buffer
- * returns 0 on success
- */
-static int lirc_add_to_buf(struct irctl *ir)
-{
- if (ir->d.add_to_buf) {
- int res = -ENODATA;
- int got_data = 0;
-
- /*
- * service the device as long as it is returning
- * data and we have space
- */
-get_data:
- res = ir->d.add_to_buf(ir->d.data, ir->buf);
- if (res == 0) {
- got_data++;
- goto get_data;
- }
-
- if (res == -ENODEV)
- kthread_stop(ir->task);
-
- return got_data ? 0 : res;
- }
-
- return 0;
-}
-
-/* main function of the polling thread
- */
-static int lirc_thread(void *irctl)
-{
- struct irctl *ir = irctl;
-
- dev_dbg(ir->d.dev, LOGHEAD "poll thread started\n",
- ir->d.name, ir->d.minor);
-
- do {
- if (ir->open) {
- if (ir->jiffies_to_wait) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(ir->jiffies_to_wait);
- }
- if (kthread_should_stop())
- break;
- if (!lirc_add_to_buf(ir))
- wake_up_interruptible(&ir->buf->wait_poll);
- } else {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- }
- } while (!kthread_should_stop());
-
- dev_dbg(ir->d.dev, LOGHEAD "poll thread ended\n",
- ir->d.name, ir->d.minor);
-
- return 0;
-}
-
-
-static struct file_operations lirc_dev_fops = {
- .owner = THIS_MODULE,
- .read = lirc_dev_fop_read,
- .write = lirc_dev_fop_write,
- .poll = lirc_dev_fop_poll,
- .unlocked_ioctl = lirc_dev_fop_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = lirc_dev_fop_ioctl,
-#endif
- .open = lirc_dev_fop_open,
- .release = lirc_dev_fop_close,
- .llseek = noop_llseek,
-};
-
-static int lirc_cdev_add(struct irctl *ir)
-{
- int retval;
- struct lirc_driver *d = &ir->d;
- struct cdev *cdev = &cdevs[d->minor];
-
- if (d->fops) {
- cdev_init(cdev, d->fops);
- cdev->owner = d->owner;
- } else {
- cdev_init(cdev, &lirc_dev_fops);
- cdev->owner = THIS_MODULE;
- }
- kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
-
- retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
- if (retval)
- kobject_put(&cdev->kobj);
-
- return retval;
-}
-
-int lirc_register_driver(struct lirc_driver *d)
-{
- struct irctl *ir;
- int minor;
- int bytes_in_key;
- unsigned int chunk_size;
- unsigned int buffer_size;
- int err;
-
- if (!d) {
- printk(KERN_ERR "lirc_dev: lirc_register_driver: "
- "driver pointer must be not NULL!\n");
- err = -EBADRQC;
- goto out;
- }
-
- if (!d->dev) {
- printk(KERN_ERR "%s: dev pointer not filled in!\n", __func__);
- err = -EINVAL;
- goto out;
- }
-
- if (MAX_IRCTL_DEVICES <= d->minor) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "\"minor\" must be between 0 and %d (%d)!\n",
- MAX_IRCTL_DEVICES-1, d->minor);
- err = -EBADRQC;
- goto out;
- }
-
- if (1 > d->code_length || (BUFLEN * 8) < d->code_length) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "code length in bits for minor (%d) "
- "must be less than %d!\n",
- d->minor, BUFLEN * 8);
- err = -EBADRQC;
- goto out;
- }
-
- dev_dbg(d->dev, "lirc_dev: lirc_register_driver: sample_rate: %d\n",
- d->sample_rate);
- if (d->sample_rate) {
- if (2 > d->sample_rate || HZ < d->sample_rate) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "sample_rate must be between 2 and %d!\n", HZ);
- err = -EBADRQC;
- goto out;
- }
- if (!d->add_to_buf) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "add_to_buf cannot be NULL when "
- "sample_rate is set\n");
- err = -EBADRQC;
- goto out;
- }
- } else if (!(d->fops && d->fops->read) && !d->rbuf) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "fops->read and rbuf cannot all be NULL!\n");
- err = -EBADRQC;
- goto out;
- } else if (!d->rbuf) {
- if (!(d->fops && d->fops->read && d->fops->poll &&
- d->fops->unlocked_ioctl)) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "neither read, poll nor unlocked_ioctl can be NULL!\n");
- err = -EBADRQC;
- goto out;
- }
- }
-
- mutex_lock(&lirc_dev_lock);
-
- minor = d->minor;
-
- if (minor < 0) {
- /* find first free slot for driver */
- for (minor = 0; minor < MAX_IRCTL_DEVICES; minor++)
- if (!irctls[minor])
- break;
- if (MAX_IRCTL_DEVICES == minor) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "no free slots for drivers!\n");
- err = -ENOMEM;
- goto out_lock;
- }
- } else if (irctls[minor]) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "minor (%d) just registered!\n", minor);
- err = -EBUSY;
- goto out_lock;
- }
-
- ir = kzalloc(sizeof(struct irctl), GFP_KERNEL);
- if (!ir) {
- err = -ENOMEM;
- goto out_lock;
- }
- lirc_irctl_init(ir);
- irctls[minor] = ir;
- d->minor = minor;
-
- if (d->sample_rate) {
- ir->jiffies_to_wait = HZ / d->sample_rate;
- } else {
- /* it means - wait for external event in task queue */
- ir->jiffies_to_wait = 0;
- }
-
- /* some safety check 8-) */
- d->name[sizeof(d->name)-1] = '\0';
-
- bytes_in_key = BITS_TO_LONGS(d->code_length) +
- (d->code_length % 8 ? 1 : 0);
- buffer_size = d->buffer_size ? d->buffer_size : BUFLEN / bytes_in_key;
- chunk_size = d->chunk_size ? d->chunk_size : bytes_in_key;
-
- if (d->rbuf) {
- ir->buf = d->rbuf;
- } else {
- ir->buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
- if (!ir->buf) {
- err = -ENOMEM;
- goto out_lock;
- }
- err = lirc_buffer_init(ir->buf, chunk_size, buffer_size);
- if (err) {
- kfree(ir->buf);
- goto out_lock;
- }
- }
- ir->chunk_size = ir->buf->chunk_size;
-
- if (d->features == 0)
- d->features = LIRC_CAN_REC_LIRCCODE;
-
- ir->d = *d;
-
- device_create(lirc_class, ir->d.dev,
- MKDEV(MAJOR(lirc_base_dev), ir->d.minor), NULL,
- "lirc%u", ir->d.minor);
-
- if (d->sample_rate) {
- /* try to fire up polling thread */
- ir->task = kthread_run(lirc_thread, (void *)ir, "lirc_dev");
- if (IS_ERR(ir->task)) {
- dev_err(d->dev, "lirc_dev: lirc_register_driver: "
- "cannot run poll thread for minor = %d\n",
- d->minor);
- err = -ECHILD;
- goto out_sysfs;
- }
- }
-
- err = lirc_cdev_add(ir);
- if (err)
- goto out_sysfs;
-
- ir->attached = 1;
- mutex_unlock(&lirc_dev_lock);
-
- dev_info(ir->d.dev, "lirc_dev: driver %s registered at minor = %d\n",
- ir->d.name, ir->d.minor);
- return minor;
-
-out_sysfs:
- device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
-out_lock:
- mutex_unlock(&lirc_dev_lock);
-out:
- return err;
-}
-EXPORT_SYMBOL(lirc_register_driver);
-
-int lirc_unregister_driver(int minor)
-{
- struct irctl *ir;
- struct cdev *cdev;
-
- if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
- printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
- "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1);
- return -EBADRQC;
- }
-
- ir = irctls[minor];
- if (!ir) {
- printk(KERN_ERR "lirc_dev: %s: failed to get irctl struct "
- "for minor %d!\n", __func__, minor);
- return -ENOENT;
- }
-
- cdev = &cdevs[minor];
-
- mutex_lock(&lirc_dev_lock);
-
- if (ir->d.minor != minor) {
- printk(KERN_ERR "lirc_dev: %s: minor (%d) device not "
- "registered!\n", __func__, minor);
- mutex_unlock(&lirc_dev_lock);
- return -ENOENT;
- }
-
- /* end up polling thread */
- if (ir->task)
- kthread_stop(ir->task);
-
- dev_dbg(ir->d.dev, "lirc_dev: driver %s unregistered from minor = %d\n",
- ir->d.name, ir->d.minor);
-
- ir->attached = 0;
- if (ir->open) {
- dev_dbg(ir->d.dev, LOGHEAD "releasing opened driver\n",
- ir->d.name, ir->d.minor);
- wake_up_interruptible(&ir->buf->wait_poll);
- mutex_lock(&ir->irctl_lock);
- ir->d.set_use_dec(ir->d.data);
- module_put(cdev->owner);
- mutex_unlock(&ir->irctl_lock);
- } else {
- lirc_irctl_cleanup(ir);
- cdev_del(cdev);
- kfree(ir);
- irctls[minor] = NULL;
- }
-
- mutex_unlock(&lirc_dev_lock);
-
- return 0;
-}
-EXPORT_SYMBOL(lirc_unregister_driver);
-
-int lirc_dev_fop_open(struct inode *inode, struct file *file)
-{
- struct irctl *ir;
- struct cdev *cdev;
- int retval = 0;
-
- if (iminor(inode) >= MAX_IRCTL_DEVICES) {
- printk(KERN_WARNING "lirc_dev [%d]: open result = -ENODEV\n",
- iminor(inode));
- return -ENODEV;
- }
-
- if (mutex_lock_interruptible(&lirc_dev_lock))
- return -ERESTARTSYS;
-
- ir = irctls[iminor(inode)];
- if (!ir) {
- retval = -ENODEV;
- goto error;
- }
-
- dev_dbg(ir->d.dev, LOGHEAD "open called\n", ir->d.name, ir->d.minor);
-
- if (ir->d.minor == NOPLUG) {
- retval = -ENODEV;
- goto error;
- }
-
- if (ir->open) {
- retval = -EBUSY;
- goto error;
- }
-
- cdev = &cdevs[iminor(inode)];
- if (try_module_get(cdev->owner)) {
- ir->open++;
- retval = ir->d.set_use_inc(ir->d.data);
-
- if (retval) {
- module_put(cdev->owner);
- ir->open--;
- } else {
- lirc_buffer_clear(ir->buf);
- }
- if (ir->task)
- wake_up_process(ir->task);
- }
-
-error:
- if (ir)
- dev_dbg(ir->d.dev, LOGHEAD "open result = %d\n",
- ir->d.name, ir->d.minor, retval);
-
- mutex_unlock(&lirc_dev_lock);
-
- nonseekable_open(inode, file);
-
- return retval;
-}
-EXPORT_SYMBOL(lirc_dev_fop_open);
-
-int lirc_dev_fop_close(struct inode *inode, struct file *file)
-{
- struct irctl *ir = irctls[iminor(inode)];
- struct cdev *cdev = &cdevs[iminor(inode)];
-
- if (!ir) {
- printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
- return -EINVAL;
- }
-
- dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
-
- WARN_ON(mutex_lock_killable(&lirc_dev_lock));
-
- ir->open--;
- if (ir->attached) {
- ir->d.set_use_dec(ir->d.data);
- module_put(cdev->owner);
- } else {
- lirc_irctl_cleanup(ir);
- cdev_del(cdev);
- irctls[ir->d.minor] = NULL;
- kfree(ir);
- }
-
- mutex_unlock(&lirc_dev_lock);
-
- return 0;
-}
-EXPORT_SYMBOL(lirc_dev_fop_close);
-
-unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait)
-{
- struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
- unsigned int ret;
-
- if (!ir) {
- printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
- return POLLERR;
- }
-
- dev_dbg(ir->d.dev, LOGHEAD "poll called\n", ir->d.name, ir->d.minor);
-
- if (!ir->attached)
- return POLLERR;
-
- poll_wait(file, &ir->buf->wait_poll, wait);
-
- if (ir->buf)
- if (lirc_buffer_empty(ir->buf))
- ret = 0;
- else
- ret = POLLIN | POLLRDNORM;
- else
- ret = POLLERR;
-
- dev_dbg(ir->d.dev, LOGHEAD "poll result = %d\n",
- ir->d.name, ir->d.minor, ret);
-
- return ret;
-}
-EXPORT_SYMBOL(lirc_dev_fop_poll);
-
-long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- __u32 mode;
- int result = 0;
- struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
-
- if (!ir) {
- printk(KERN_ERR "lirc_dev: %s: no irctl found!\n", __func__);
- return -ENODEV;
- }
-
- dev_dbg(ir->d.dev, LOGHEAD "ioctl called (0x%x)\n",
- ir->d.name, ir->d.minor, cmd);
-
- if (ir->d.minor == NOPLUG || !ir->attached) {
- dev_dbg(ir->d.dev, LOGHEAD "ioctl result = -ENODEV\n",
- ir->d.name, ir->d.minor);
- return -ENODEV;
- }
-
- mutex_lock(&ir->irctl_lock);
-
- switch (cmd) {
- case LIRC_GET_FEATURES:
- result = put_user(ir->d.features, (__u32 *)arg);
- break;
- case LIRC_GET_REC_MODE:
- if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
- result = -ENOSYS;
- break;
- }
-
- result = put_user(LIRC_REC2MODE
- (ir->d.features & LIRC_CAN_REC_MASK),
- (__u32 *)arg);
- break;
- case LIRC_SET_REC_MODE:
- if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
- result = -ENOSYS;
- break;
- }
-
- result = get_user(mode, (__u32 *)arg);
- if (!result && !(LIRC_MODE2REC(mode) & ir->d.features))
- result = -EINVAL;
- /*
- * FIXME: We should actually set the mode somehow but
- * for now, lirc_serial doesn't support mode changing either
- */
- break;
- case LIRC_GET_LENGTH:
- result = put_user(ir->d.code_length, (__u32 *)arg);
- break;
- case LIRC_GET_MIN_TIMEOUT:
- if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
- ir->d.min_timeout == 0) {
- result = -ENOSYS;
- break;
- }
-
- result = put_user(ir->d.min_timeout, (__u32 *)arg);
- break;
- case LIRC_GET_MAX_TIMEOUT:
- if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
- ir->d.max_timeout == 0) {
- result = -ENOSYS;
- break;
- }
-
- result = put_user(ir->d.max_timeout, (__u32 *)arg);
- break;
- default:
- result = -EINVAL;
- }
-
- dev_dbg(ir->d.dev, LOGHEAD "ioctl result = %d\n",
- ir->d.name, ir->d.minor, result);
-
- mutex_unlock(&ir->irctl_lock);
-
- return result;
-}
-EXPORT_SYMBOL(lirc_dev_fop_ioctl);
-
-ssize_t lirc_dev_fop_read(struct file *file,
- char *buffer,
- size_t length,
- loff_t *ppos)
-{
- struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
- unsigned char *buf;
- int ret = 0, written = 0;
- DECLARE_WAITQUEUE(wait, current);
-
- if (!ir) {
- printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
- return -ENODEV;
- }
-
- dev_dbg(ir->d.dev, LOGHEAD "read called\n", ir->d.name, ir->d.minor);
-
- buf = kzalloc(ir->chunk_size, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- if (mutex_lock_interruptible(&ir->irctl_lock)) {
- ret = -ERESTARTSYS;
- goto out_unlocked;
- }
- if (!ir->attached) {
- ret = -ENODEV;
- goto out_locked;
- }
-
- if (length % ir->chunk_size) {
- ret = -EINVAL;
- goto out_locked;
- }
-
- /*
- * we add ourselves to the task queue before buffer check
- * to avoid losing scan code (in case when queue is awaken somewhere
- * between while condition checking and scheduling)
- */
- add_wait_queue(&ir->buf->wait_poll, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
-
- /*
- * while we didn't provide 'length' bytes, device is opened in blocking
- * mode and 'copy_to_user' is happy, wait for data.
- */
- while (written < length && ret == 0) {
- if (lirc_buffer_empty(ir->buf)) {
- /* According to the read(2) man page, 'written' can be
- * returned as less than 'length', instead of blocking
- * again, returning -EWOULDBLOCK, or returning
- * -ERESTARTSYS */
- if (written)
- break;
- if (file->f_flags & O_NONBLOCK) {
- ret = -EWOULDBLOCK;
- break;
- }
- if (signal_pending(current)) {
- ret = -ERESTARTSYS;
- break;
- }
-
- mutex_unlock(&ir->irctl_lock);
- schedule();
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (mutex_lock_interruptible(&ir->irctl_lock)) {
- ret = -ERESTARTSYS;
- remove_wait_queue(&ir->buf->wait_poll, &wait);
- set_current_state(TASK_RUNNING);
- goto out_unlocked;
- }
-
- if (!ir->attached) {
- ret = -ENODEV;
- break;
- }
- } else {
- lirc_buffer_read(ir->buf, buf);
- ret = copy_to_user((void *)buffer+written, buf,
- ir->buf->chunk_size);
- if (!ret)
- written += ir->buf->chunk_size;
- else
- ret = -EFAULT;
- }
- }
-
- remove_wait_queue(&ir->buf->wait_poll, &wait);
- set_current_state(TASK_RUNNING);
-
-out_locked:
- mutex_unlock(&ir->irctl_lock);
-
-out_unlocked:
- kfree(buf);
- dev_dbg(ir->d.dev, LOGHEAD "read result = %s (%d)\n",
- ir->d.name, ir->d.minor, ret ? "<fail>" : "<ok>", ret);
-
- return ret ? ret : written;
-}
-EXPORT_SYMBOL(lirc_dev_fop_read);
-
-void *lirc_get_pdata(struct file *file)
-{
- void *data = NULL;
-
- if (file && file->f_dentry && file->f_dentry->d_inode &&
- file->f_dentry->d_inode->i_rdev) {
- struct irctl *ir;
- ir = irctls[iminor(file->f_dentry->d_inode)];
- data = ir->d.data;
- }
-
- return data;
-}
-EXPORT_SYMBOL(lirc_get_pdata);
-
-
-ssize_t lirc_dev_fop_write(struct file *file, const char *buffer,
- size_t length, loff_t *ppos)
-{
- struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
-
- if (!ir) {
- printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
- return -ENODEV;
- }
-
- dev_dbg(ir->d.dev, LOGHEAD "write called\n", ir->d.name, ir->d.minor);
-
- if (!ir->attached)
- return -ENODEV;
-
- return -EINVAL;
-}
-EXPORT_SYMBOL(lirc_dev_fop_write);
-
-
-static int __init lirc_dev_init(void)
-{
- int retval;
-
- lirc_class = class_create(THIS_MODULE, "lirc");
- if (IS_ERR(lirc_class)) {
- retval = PTR_ERR(lirc_class);
- printk(KERN_ERR "lirc_dev: class_create failed\n");
- goto error;
- }
-
- retval = alloc_chrdev_region(&lirc_base_dev, 0, MAX_IRCTL_DEVICES,
- IRCTL_DEV_NAME);
- if (retval) {
- class_destroy(lirc_class);
- printk(KERN_ERR "lirc_dev: alloc_chrdev_region failed\n");
- goto error;
- }
-
-
- printk(KERN_INFO "lirc_dev: IR Remote Control driver registered, "
- "major %d \n", MAJOR(lirc_base_dev));
-
-error:
- return retval;
-}
-
-
-
-static void __exit lirc_dev_exit(void)
-{
- class_destroy(lirc_class);
- unregister_chrdev_region(lirc_base_dev, MAX_IRCTL_DEVICES);
- printk(KERN_INFO "lirc_dev: module unloaded\n");
-}
-
-module_init(lirc_dev_init);
-module_exit(lirc_dev_exit);
-
-MODULE_DESCRIPTION("LIRC base driver module");
-MODULE_AUTHOR("Artur Lipowski");
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging messages");
+++ /dev/null
-/*
- * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers
- *
- * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
- *
- * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan
- * Conti, Martin Blatter and Daniel Melander, the latter of which was
- * in turn also based on the lirc_atiusb driver by Paul Miller. The
- * two mce drivers were merged into one by Jarod Wilson, with transmit
- * support for the 1st-gen device added primarily by Patrick Calhoun,
- * with a bit of tweaks by Jarod. Debugging improvements and proper
- * support for what appears to be 3rd-gen hardware added by Jarod.
- * Initial port from lirc driver to ir-core drivery by Jarod, based
- * partially on a port to an earlier proposed IR infrastructure by
- * Jon Smirl, which included enhancements and simplifications to the
- * incoming IR buffer parsing routines.
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/ir-core.h>
-
-#define DRIVER_VERSION "1.91"
-#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
-#define DRIVER_DESC "Windows Media Center Ed. eHome Infrared Transceiver " \
- "device driver"
-#define DRIVER_NAME "mceusb"
-
-#define USB_BUFLEN 32 /* USB reception buffer length */
-#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
-#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
-#define MS_TO_NS(msec) ((msec) * 1000)
-
-/* MCE constants */
-#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
-#define MCE_TIME_UNIT 50 /* Approx 50us resolution */
-#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */
-#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */
-#define MCE_IRDATA_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
-#define MCE_IRDATA_TRAILER 0x80 /* End of IR data */
-#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */
-#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
-#define MCE_DEFAULT_TX_MASK 0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */
-#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */
-#define MCE_PULSE_MASK 0x7f /* Pulse mask */
-#define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */
-
-#define MCE_HW_CMD_HEADER 0xff /* MCE hardware command header */
-#define MCE_COMMAND_HEADER 0x9f /* MCE command header */
-#define MCE_COMMAND_MASK 0xe0 /* Mask out command bits */
-#define MCE_COMMAND_NULL 0x00 /* These show up various places... */
-/* if buf[i] & MCE_COMMAND_MASK == 0x80 and buf[i] != MCE_COMMAND_HEADER,
- * then we're looking at a raw IR data sample */
-#define MCE_COMMAND_IRDATA 0x80
-#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */
-
-/* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */
-#define MCE_CMD_SIG_END 0x01 /* End of signal */
-#define MCE_CMD_PING 0x03 /* Ping device */
-#define MCE_CMD_UNKNOWN 0x04 /* Unknown */
-#define MCE_CMD_UNKNOWN2 0x05 /* Unknown */
-#define MCE_CMD_S_CARRIER 0x06 /* Set TX carrier frequency */
-#define MCE_CMD_G_CARRIER 0x07 /* Get TX carrier frequency */
-#define MCE_CMD_S_TXMASK 0x08 /* Set TX port bitmask */
-#define MCE_CMD_UNKNOWN3 0x09 /* Unknown */
-#define MCE_CMD_UNKNOWN4 0x0a /* Unknown */
-#define MCE_CMD_G_REVISION 0x0b /* Get hw/sw revision */
-#define MCE_CMD_S_TIMEOUT 0x0c /* Set RX timeout value */
-#define MCE_CMD_G_TIMEOUT 0x0d /* Get RX timeout value */
-#define MCE_CMD_UNKNOWN5 0x0e /* Unknown */
-#define MCE_CMD_UNKNOWN6 0x0f /* Unknown */
-#define MCE_CMD_G_RXPORTSTS 0x11 /* Get RX port status */
-#define MCE_CMD_G_TXMASK 0x13 /* Set TX port bitmask */
-#define MCE_CMD_S_RXSENSOR 0x14 /* Set RX sensor (std/learning) */
-#define MCE_CMD_G_RXSENSOR 0x15 /* Get RX sensor (std/learning) */
-#define MCE_RSP_PULSE_COUNT 0x15 /* RX pulse count (only if learning) */
-#define MCE_CMD_TX_PORTS 0x16 /* Get number of TX ports */
-#define MCE_CMD_G_WAKESRC 0x17 /* Get wake source */
-#define MCE_CMD_UNKNOWN7 0x18 /* Unknown */
-#define MCE_CMD_UNKNOWN8 0x19 /* Unknown */
-#define MCE_CMD_UNKNOWN9 0x1b /* Unknown */
-#define MCE_CMD_DEVICE_RESET 0xaa /* Reset the hardware */
-#define MCE_RSP_CMD_INVALID 0xfe /* Invalid command issued */
-
-
-/* module parameters */
-#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
-#else
-static int debug;
-#endif
-
-/* general constants */
-#define SEND_FLAG_IN_PROGRESS 1
-#define SEND_FLAG_COMPLETE 2
-#define RECV_FLAG_IN_PROGRESS 3
-#define RECV_FLAG_COMPLETE 4
-
-#define MCEUSB_RX 1
-#define MCEUSB_TX 2
-
-#define VENDOR_PHILIPS 0x0471
-#define VENDOR_SMK 0x0609
-#define VENDOR_TATUNG 0x1460
-#define VENDOR_GATEWAY 0x107b
-#define VENDOR_SHUTTLE 0x1308
-#define VENDOR_SHUTTLE2 0x051c
-#define VENDOR_MITSUMI 0x03ee
-#define VENDOR_TOPSEED 0x1784
-#define VENDOR_RICAVISION 0x179d
-#define VENDOR_ITRON 0x195d
-#define VENDOR_FIC 0x1509
-#define VENDOR_LG 0x043e
-#define VENDOR_MICROSOFT 0x045e
-#define VENDOR_FORMOSA 0x147a
-#define VENDOR_FINTEK 0x1934
-#define VENDOR_PINNACLE 0x2304
-#define VENDOR_ECS 0x1019
-#define VENDOR_WISTRON 0x0fb8
-#define VENDOR_COMPRO 0x185b
-#define VENDOR_NORTHSTAR 0x04eb
-#define VENDOR_REALTEK 0x0bda
-#define VENDOR_TIVO 0x105a
-#define VENDOR_CONEXANT 0x0572
-
-enum mceusb_model_type {
- MCE_GEN2 = 0, /* Most boards */
- MCE_GEN1,
- MCE_GEN3,
- MCE_GEN2_TX_INV,
- POLARIS_EVK,
- CX_HYBRID_TV,
-};
-
-struct mceusb_model {
- u32 mce_gen1:1;
- u32 mce_gen2:1;
- u32 mce_gen3:1;
- u32 tx_mask_normal:1;
- u32 is_polaris:1;
- u32 no_tx:1;
-
- const char *rc_map; /* Allow specify a per-board map */
- const char *name; /* per-board name */
-};
-
-static const struct mceusb_model mceusb_model[] = {
- [MCE_GEN1] = {
- .mce_gen1 = 1,
- .tx_mask_normal = 1,
- },
- [MCE_GEN2] = {
- .mce_gen2 = 1,
- },
- [MCE_GEN2_TX_INV] = {
- .mce_gen2 = 1,
- .tx_mask_normal = 1,
- },
- [MCE_GEN3] = {
- .mce_gen3 = 1,
- .tx_mask_normal = 1,
- },
- [POLARIS_EVK] = {
- .is_polaris = 1,
- /*
- * In fact, the EVK is shipped without
- * remotes, but we should have something handy,
- * to allow testing it
- */
- .rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
- .name = "Conexant Hybrid TV (cx231xx) MCE IR",
- },
- [CX_HYBRID_TV] = {
- .is_polaris = 1,
- .no_tx = 1, /* tx isn't wired up at all */
- .name = "Conexant Hybrid TV (cx231xx) MCE IR",
- },
-};
-
-static struct usb_device_id mceusb_dev_table[] = {
- /* Original Microsoft MCE IR Transceiver (often HP-branded) */
- { USB_DEVICE(VENDOR_MICROSOFT, 0x006d),
- .driver_info = MCE_GEN1 },
- /* Philips Infrared Transceiver - Sahara branded */
- { USB_DEVICE(VENDOR_PHILIPS, 0x0608) },
- /* Philips Infrared Transceiver - HP branded */
- { USB_DEVICE(VENDOR_PHILIPS, 0x060c),
- .driver_info = MCE_GEN2_TX_INV },
- /* Philips SRM5100 */
- { USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
- /* Philips Infrared Transceiver - Omaura */
- { USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
- /* Philips Infrared Transceiver - Spinel plus */
- { USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
- /* Philips eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
- /* Philips/Spinel plus IR transceiver for ASUS */
- { USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
- /* Philips/Spinel plus IR transceiver for ASUS */
- { USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
- /* Realtek MCE IR Receiver */
- { USB_DEVICE(VENDOR_REALTEK, 0x0161) },
- /* SMK/Toshiba G83C0004D410 */
- { USB_DEVICE(VENDOR_SMK, 0x031d),
- .driver_info = MCE_GEN2_TX_INV },
- /* SMK eHome Infrared Transceiver (Sony VAIO) */
- { USB_DEVICE(VENDOR_SMK, 0x0322),
- .driver_info = MCE_GEN2_TX_INV },
- /* bundled with Hauppauge PVR-150 */
- { USB_DEVICE(VENDOR_SMK, 0x0334),
- .driver_info = MCE_GEN2_TX_INV },
- /* SMK eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_SMK, 0x0338) },
- /* Tatung eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_TATUNG, 0x9150) },
- /* Shuttle eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
- /* Shuttle eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
- /* Gateway eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
- /* Mitsumi */
- { USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
- /* Topseed eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_TOPSEED, 0x0001),
- .driver_info = MCE_GEN2_TX_INV },
- /* Topseed HP eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_TOPSEED, 0x0006),
- .driver_info = MCE_GEN2_TX_INV },
- /* Topseed eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_TOPSEED, 0x0007),
- .driver_info = MCE_GEN2_TX_INV },
- /* Topseed eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_TOPSEED, 0x0008),
- .driver_info = MCE_GEN3 },
- /* Topseed eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_TOPSEED, 0x000a),
- .driver_info = MCE_GEN2_TX_INV },
- /* Topseed eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_TOPSEED, 0x0011),
- .driver_info = MCE_GEN2_TX_INV },
- /* Ricavision internal Infrared Transceiver */
- { USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
- /* Itron ione Libra Q-11 */
- { USB_DEVICE(VENDOR_ITRON, 0x7002) },
- /* FIC eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_FIC, 0x9242) },
- /* LG eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_LG, 0x9803) },
- /* Microsoft MCE Infrared Transceiver */
- { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
- /* Formosa eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
- /* Formosa21 / eHome Infrared Receiver */
- { USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
- /* Formosa aim / Trust MCE Infrared Receiver */
- { USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
- /* Formosa Industrial Computing / Beanbag Emulation Device */
- { USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
- /* Formosa21 / eHome Infrared Receiver */
- { USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
- /* Formosa Industrial Computing AIM IR605/A */
- { USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
- /* Formosa Industrial Computing */
- { USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
- /* Fintek eHome Infrared Transceiver (HP branded) */
- { USB_DEVICE(VENDOR_FINTEK, 0x5168) },
- /* Fintek eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_FINTEK, 0x0602) },
- /* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
- { USB_DEVICE(VENDOR_FINTEK, 0x0702) },
- /* Pinnacle Remote Kit */
- { USB_DEVICE(VENDOR_PINNACLE, 0x0225),
- .driver_info = MCE_GEN3 },
- /* Elitegroup Computer Systems IR */
- { USB_DEVICE(VENDOR_ECS, 0x0f38) },
- /* Wistron Corp. eHome Infrared Receiver */
- { USB_DEVICE(VENDOR_WISTRON, 0x0002) },
- /* Compro K100 */
- { USB_DEVICE(VENDOR_COMPRO, 0x3020) },
- /* Compro K100 v2 */
- { USB_DEVICE(VENDOR_COMPRO, 0x3082) },
- /* Northstar Systems, Inc. eHome Infrared Transceiver */
- { USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
- /* TiVo PC IR Receiver */
- { USB_DEVICE(VENDOR_TIVO, 0x2000) },
- /* Conexant Hybrid TV "Shelby" Polaris SDK */
- { USB_DEVICE(VENDOR_CONEXANT, 0x58a1),
- .driver_info = POLARIS_EVK },
- /* Conexant Hybrid TV RDU253S Polaris */
- { USB_DEVICE(VENDOR_CONEXANT, 0x58a5),
- .driver_info = CX_HYBRID_TV },
- /* Terminating entry */
- { }
-};
-
-/* data structure for each usb transceiver */
-struct mceusb_dev {
- /* ir-core bits */
- struct ir_dev_props *props;
-
- /* optional features we can enable */
- bool carrier_report_enabled;
- bool learning_enabled;
-
- /* core device bits */
- struct device *dev;
- struct input_dev *idev;
-
- /* usb */
- struct usb_device *usbdev;
- struct urb *urb_in;
- struct usb_endpoint_descriptor *usb_ep_in;
- struct usb_endpoint_descriptor *usb_ep_out;
-
- /* buffers and dma */
- unsigned char *buf_in;
- unsigned int len_in;
- dma_addr_t dma_in;
- dma_addr_t dma_out;
-
- enum {
- CMD_HEADER = 0,
- SUBCMD,
- CMD_DATA,
- PARSE_IRDATA,
- } parser_state;
-
- u8 cmd, rem; /* Remaining IR data bytes in packet */
-
- struct {
- u32 connected:1;
- u32 tx_mask_normal:1;
- u32 microsoft_gen1:1;
- u32 no_tx:1;
- } flags;
-
- /* transmit support */
- int send_flags;
- u32 carrier;
- unsigned char tx_mask;
-
- char name[128];
- char phys[64];
- enum mceusb_model_type model;
-};
-
-/*
- * MCE Device Command Strings
- * Device command responses vary from device to device...
- * - DEVICE_RESET resets the hardware to its default state
- * - GET_REVISION fetches the hardware/software revision, common
- * replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42
- * - GET_CARRIER_FREQ gets the carrier mode and frequency of the
- * device, with replies in the form of 9f 06 MM FF, where MM is 0-3,
- * meaning clk of 10000000, 2500000, 625000 or 156250, and FF is
- * ((clk / frequency) - 1)
- * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us,
- * response in the form of 9f 0c msb lsb
- * - GET_TX_BITMASK fetches the transmitter bitmask, replies in
- * the form of 9f 08 bm, where bm is the bitmask
- * - GET_RX_SENSOR fetches the RX sensor setting -- long-range
- * general use one or short-range learning one, in the form of
- * 9f 14 ss, where ss is either 01 for long-range or 02 for short
- * - SET_CARRIER_FREQ sets a new carrier mode and frequency
- * - SET_TX_BITMASK sets the transmitter bitmask
- * - SET_RX_TIMEOUT sets the receiver timeout
- * - SET_RX_SENSOR sets which receiver sensor to use
- */
-static char DEVICE_RESET[] = {MCE_COMMAND_NULL, MCE_HW_CMD_HEADER,
- MCE_CMD_DEVICE_RESET};
-static char GET_REVISION[] = {MCE_HW_CMD_HEADER, MCE_CMD_G_REVISION};
-static char GET_UNKNOWN[] = {MCE_HW_CMD_HEADER, MCE_CMD_UNKNOWN7};
-static char GET_UNKNOWN2[] = {MCE_COMMAND_HEADER, MCE_CMD_UNKNOWN2};
-static char GET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER, MCE_CMD_G_CARRIER};
-static char GET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TIMEOUT};
-static char GET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TXMASK};
-static char GET_RX_SENSOR[] = {MCE_COMMAND_HEADER, MCE_CMD_G_RXSENSOR};
-/* sub in desired values in lower byte or bytes for full command */
-/* FIXME: make use of these for transmit.
-static char SET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER,
- MCE_CMD_S_CARRIER, 0x00, 0x00};
-static char SET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_S_TXMASK, 0x00};
-static char SET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER,
- MCE_CMD_S_TIMEOUT, 0x00, 0x00};
-static char SET_RX_SENSOR[] = {MCE_COMMAND_HEADER,
- MCE_CMD_S_RXSENSOR, 0x00};
-*/
-
-static int mceusb_cmdsize(u8 cmd, u8 subcmd)
-{
- int datasize = 0;
-
- switch (cmd) {
- case MCE_COMMAND_NULL:
- if (subcmd == MCE_HW_CMD_HEADER)
- datasize = 1;
- break;
- case MCE_HW_CMD_HEADER:
- switch (subcmd) {
- case MCE_CMD_G_REVISION:
- datasize = 2;
- break;
- }
- case MCE_COMMAND_HEADER:
- switch (subcmd) {
- case MCE_CMD_UNKNOWN:
- case MCE_CMD_S_CARRIER:
- case MCE_CMD_S_TIMEOUT:
- case MCE_RSP_PULSE_COUNT:
- datasize = 2;
- break;
- case MCE_CMD_SIG_END:
- case MCE_CMD_S_TXMASK:
- case MCE_CMD_S_RXSENSOR:
- datasize = 1;
- break;
- }
- }
- return datasize;
-}
-
-static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
- int offset, int len, bool out)
-{
- char codes[USB_BUFLEN * 3 + 1];
- char inout[9];
- u8 cmd, subcmd, data1, data2;
- struct device *dev = ir->dev;
- int i, start, skip = 0;
-
- if (!debug)
- return;
-
- /* skip meaningless 0xb1 0x60 header bytes on orig receiver */
- if (ir->flags.microsoft_gen1 && !out && !offset)
- skip = 2;
-
- if (len <= skip)
- return;
-
- for (i = 0; i < len && i < USB_BUFLEN; i++)
- snprintf(codes + i * 3, 4, "%02x ", buf[i + offset] & 0xff);
-
- dev_info(dev, "%sx data: %s(length=%d)\n",
- (out ? "t" : "r"), codes, len);
-
- if (out)
- strcpy(inout, "Request\0");
- else
- strcpy(inout, "Got\0");
-
- start = offset + skip;
- cmd = buf[start] & 0xff;
- subcmd = buf[start + 1] & 0xff;
- data1 = buf[start + 2] & 0xff;
- data2 = buf[start + 3] & 0xff;
-
- switch (cmd) {
- case MCE_COMMAND_NULL:
- if ((subcmd == MCE_HW_CMD_HEADER) &&
- (data1 == MCE_CMD_DEVICE_RESET))
- dev_info(dev, "Device reset requested\n");
- else
- dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
- cmd, subcmd);
- break;
- case MCE_HW_CMD_HEADER:
- switch (subcmd) {
- case MCE_CMD_G_REVISION:
- if (len == 2)
- dev_info(dev, "Get hw/sw rev?\n");
- else
- dev_info(dev, "hw/sw rev 0x%02x 0x%02x "
- "0x%02x 0x%02x\n", data1, data2,
- buf[start + 4], buf[start + 5]);
- break;
- case MCE_CMD_DEVICE_RESET:
- dev_info(dev, "Device reset requested\n");
- break;
- case MCE_RSP_CMD_INVALID:
- dev_info(dev, "Previous command not supported\n");
- break;
- case MCE_CMD_UNKNOWN7:
- case MCE_CMD_UNKNOWN9:
- default:
- dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
- cmd, subcmd);
- break;
- }
- break;
- case MCE_COMMAND_HEADER:
- switch (subcmd) {
- case MCE_CMD_SIG_END:
- dev_info(dev, "End of signal\n");
- break;
- case MCE_CMD_PING:
- dev_info(dev, "Ping\n");
- break;
- case MCE_CMD_UNKNOWN:
- dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
- data1, data2);
- break;
- case MCE_CMD_S_CARRIER:
- dev_info(dev, "%s carrier mode and freq of "
- "0x%02x 0x%02x\n", inout, data1, data2);
- break;
- case MCE_CMD_G_CARRIER:
- dev_info(dev, "Get carrier mode and freq\n");
- break;
- case MCE_CMD_S_TXMASK:
- dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
- inout, data1);
- break;
- case MCE_CMD_S_TIMEOUT:
- /* value is in units of 50us, so x*50/100 or x/2 ms */
- dev_info(dev, "%s receive timeout of %d ms\n",
- inout, ((data1 << 8) | data2) / 2);
- break;
- case MCE_CMD_G_TIMEOUT:
- dev_info(dev, "Get receive timeout\n");
- break;
- case MCE_CMD_G_TXMASK:
- dev_info(dev, "Get transmit blaster mask\n");
- break;
- case MCE_CMD_S_RXSENSOR:
- dev_info(dev, "%s %s-range receive sensor in use\n",
- inout, data1 == 0x02 ? "short" : "long");
- break;
- case MCE_CMD_G_RXSENSOR:
- /* aka MCE_RSP_PULSE_COUNT */
- if (out)
- dev_info(dev, "Get receive sensor\n");
- else if (ir->learning_enabled)
- dev_info(dev, "RX pulse count: %d\n",
- ((data1 << 8) | data2));
- break;
- case MCE_RSP_CMD_INVALID:
- dev_info(dev, "Error! Hardware is likely wedged...\n");
- break;
- case MCE_CMD_UNKNOWN2:
- case MCE_CMD_UNKNOWN3:
- case MCE_CMD_UNKNOWN5:
- default:
- dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
- cmd, subcmd);
- break;
- }
- break;
- default:
- break;
- }
-
- if (cmd == MCE_IRDATA_TRAILER)
- dev_info(dev, "End of raw IR data\n");
- else if ((cmd != MCE_COMMAND_HEADER) &&
- ((cmd & MCE_COMMAND_MASK) == MCE_COMMAND_IRDATA))
- dev_info(dev, "Raw IR data, %d pulse/space samples\n", ir->rem);
-}
-
-static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
-{
- struct mceusb_dev *ir;
- int len;
-
- if (!urb)
- return;
-
- ir = urb->context;
- if (ir) {
- len = urb->actual_length;
-
- dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
- urb->status, len);
-
- mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
- }
-
-}
-
-/* request incoming or send outgoing usb packet - used to initialize remote */
-static void mce_request_packet(struct mceusb_dev *ir,
- struct usb_endpoint_descriptor *ep,
- unsigned char *data, int size, int urb_type)
-{
- int res;
- struct urb *async_urb;
- struct device *dev = ir->dev;
- unsigned char *async_buf;
-
- if (urb_type == MCEUSB_TX) {
- async_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (unlikely(!async_urb)) {
- dev_err(dev, "Error, couldn't allocate urb!\n");
- return;
- }
-
- async_buf = kzalloc(size, GFP_KERNEL);
- if (!async_buf) {
- dev_err(dev, "Error, couldn't allocate buf!\n");
- usb_free_urb(async_urb);
- return;
- }
-
- /* outbound data */
- usb_fill_int_urb(async_urb, ir->usbdev,
- usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
- async_buf, size, (usb_complete_t)mce_async_callback,
- ir, ep->bInterval);
- memcpy(async_buf, data, size);
-
- } else if (urb_type == MCEUSB_RX) {
- /* standard request */
- async_urb = ir->urb_in;
- ir->send_flags = RECV_FLAG_IN_PROGRESS;
-
- } else {
- dev_err(dev, "Error! Unknown urb type %d\n", urb_type);
- return;
- }
-
- dev_dbg(dev, "receive request called (size=%#x)\n", size);
-
- async_urb->transfer_buffer_length = size;
- async_urb->dev = ir->usbdev;
-
- res = usb_submit_urb(async_urb, GFP_ATOMIC);
- if (res) {
- dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
- return;
- }
- dev_dbg(dev, "receive request complete (res=%d)\n", res);
-}
-
-static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
-{
- mce_request_packet(ir, ir->usb_ep_out, data, size, MCEUSB_TX);
-}
-
-static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
-{
- mce_request_packet(ir, ir->usb_ep_in, data, size, MCEUSB_RX);
-}
-
-/* Send data out the IR blaster port(s) */
-static int mceusb_tx_ir(void *priv, int *txbuf, u32 n)
-{
- struct mceusb_dev *ir = priv;
- int i, ret = 0;
- int count, cmdcount = 0;
- unsigned char *cmdbuf; /* MCE command buffer */
- long signal_duration = 0; /* Singnal length in us */
- struct timeval start_time, end_time;
-
- do_gettimeofday(&start_time);
-
- count = n / sizeof(int);
-
- cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL);
- if (!cmdbuf)
- return -ENOMEM;
-
- /* MCE tx init header */
- cmdbuf[cmdcount++] = MCE_COMMAND_HEADER;
- cmdbuf[cmdcount++] = MCE_CMD_S_TXMASK;
- cmdbuf[cmdcount++] = ir->tx_mask;
-
- /* Generate mce packet data */
- for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
- signal_duration += txbuf[i];
- txbuf[i] = txbuf[i] / MCE_TIME_UNIT;
-
- do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
-
- /* Insert mce packet header every 4th entry */
- if ((cmdcount < MCE_CMDBUF_SIZE) &&
- (cmdcount - MCE_TX_HEADER_LENGTH) %
- MCE_CODE_LENGTH == 0)
- cmdbuf[cmdcount++] = MCE_IRDATA_HEADER;
-
- /* Insert mce packet data */
- if (cmdcount < MCE_CMDBUF_SIZE)
- cmdbuf[cmdcount++] =
- (txbuf[i] < MCE_PULSE_BIT ?
- txbuf[i] : MCE_MAX_PULSE_LENGTH) |
- (i & 1 ? 0x00 : MCE_PULSE_BIT);
- else {
- ret = -EINVAL;
- goto out;
- }
-
- } while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) &&
- (txbuf[i] -= MCE_MAX_PULSE_LENGTH));
- }
-
- /* Fix packet length in last header */
- cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] =
- MCE_COMMAND_IRDATA + (cmdcount - MCE_TX_HEADER_LENGTH) %
- MCE_CODE_LENGTH - 1;
-
- /* Check if we have room for the empty packet at the end */
- if (cmdcount >= MCE_CMDBUF_SIZE) {
- ret = -EINVAL;
- goto out;
- }
-
- /* All mce commands end with an empty packet (0x80) */
- cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER;
-
- /* Transmit the command to the mce device */
- mce_async_out(ir, cmdbuf, cmdcount);
-
- /*
- * The lircd gap calculation expects the write function to
- * wait the time it takes for the ircommand to be sent before
- * it returns.
- */
- do_gettimeofday(&end_time);
- signal_duration -= (end_time.tv_usec - start_time.tv_usec) +
- (end_time.tv_sec - start_time.tv_sec) * 1000000;
-
- /* delay with the closest number of ticks */
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(usecs_to_jiffies(signal_duration));
-
-out:
- kfree(cmdbuf);
- return ret ? ret : n;
-}
-
-/* Sets active IR outputs -- mce devices typically have two */
-static int mceusb_set_tx_mask(void *priv, u32 mask)
-{
- struct mceusb_dev *ir = priv;
-
- if (ir->flags.tx_mask_normal)
- ir->tx_mask = mask;
- else
- ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
- mask ^ MCE_DEFAULT_TX_MASK : mask) << 1;
-
- return 0;
-}
-
-/* Sets the send carrier frequency and mode */
-static int mceusb_set_tx_carrier(void *priv, u32 carrier)
-{
- struct mceusb_dev *ir = priv;
- int clk = 10000000;
- int prescaler = 0, divisor = 0;
- unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
- MCE_CMD_S_CARRIER, 0x00, 0x00 };
-
- /* Carrier has changed */
- if (ir->carrier != carrier) {
-
- if (carrier == 0) {
- ir->carrier = carrier;
- cmdbuf[2] = MCE_CMD_SIG_END;
- cmdbuf[3] = MCE_IRDATA_TRAILER;
- dev_dbg(ir->dev, "%s: disabling carrier "
- "modulation\n", __func__);
- mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
- return carrier;
- }
-
- for (prescaler = 0; prescaler < 4; ++prescaler) {
- divisor = (clk >> (2 * prescaler)) / carrier;
- if (divisor <= 0xff) {
- ir->carrier = carrier;
- cmdbuf[2] = prescaler;
- cmdbuf[3] = divisor;
- dev_dbg(ir->dev, "%s: requesting %u HZ "
- "carrier\n", __func__, carrier);
-
- /* Transmit new carrier to mce device */
- mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
- return carrier;
- }
- }
-
- return -EINVAL;
-
- }
-
- return carrier;
-}
-
-/*
- * We don't do anything but print debug spew for many of the command bits
- * we receive from the hardware, but some of them are useful information
- * we want to store so that we can use them.
- */
-static void mceusb_handle_command(struct mceusb_dev *ir, int index)
-{
- u8 hi = ir->buf_in[index + 1] & 0xff;
- u8 lo = ir->buf_in[index + 2] & 0xff;
-
- switch (ir->buf_in[index]) {
- /* 2-byte return value commands */
- case MCE_CMD_S_TIMEOUT:
- ir->props->timeout = MS_TO_NS((hi << 8 | lo) / 2);
- break;
-
- /* 1-byte return value commands */
- case MCE_CMD_S_TXMASK:
- ir->tx_mask = hi;
- break;
- case MCE_CMD_S_RXSENSOR:
- ir->learning_enabled = (hi == 0x02);
- break;
- default:
- break;
- }
-}
-
-static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
-{
- DEFINE_IR_RAW_EVENT(rawir);
- int i = 0;
-
- /* skip meaningless 0xb1 0x60 header bytes on orig receiver */
- if (ir->flags.microsoft_gen1)
- i = 2;
-
- /* if there's no data, just return now */
- if (buf_len <= i)
- return;
-
- for (; i < buf_len; i++) {
- switch (ir->parser_state) {
- case SUBCMD:
- ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]);
- mceusb_dev_printdata(ir, ir->buf_in, i - 1,
- ir->rem + 2, false);
- mceusb_handle_command(ir, i);
- ir->parser_state = CMD_DATA;
- break;
- case PARSE_IRDATA:
- ir->rem--;
- rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
- rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
- * MS_TO_NS(MCE_TIME_UNIT);
-
- dev_dbg(ir->dev, "Storing %s with duration %d\n",
- rawir.pulse ? "pulse" : "space",
- rawir.duration);
-
- ir_raw_event_store_with_filter(ir->idev, &rawir);
- break;
- case CMD_DATA:
- ir->rem--;
- break;
- case CMD_HEADER:
- /* decode mce packets of the form (84),AA,BB,CC,DD */
- /* IR data packets can span USB messages - rem */
- ir->cmd = ir->buf_in[i];
- if ((ir->cmd == MCE_COMMAND_HEADER) ||
- ((ir->cmd & MCE_COMMAND_MASK) !=
- MCE_COMMAND_IRDATA)) {
- ir->parser_state = SUBCMD;
- continue;
- }
- ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
- mceusb_dev_printdata(ir, ir->buf_in,
- i, ir->rem + 1, false);
- if (ir->rem)
- ir->parser_state = PARSE_IRDATA;
- break;
- }
-
- if (ir->parser_state != CMD_HEADER && !ir->rem)
- ir->parser_state = CMD_HEADER;
- }
- dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
- ir_raw_event_handle(ir->idev);
-}
-
-static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
-{
- struct mceusb_dev *ir;
- int buf_len;
-
- if (!urb)
- return;
-
- ir = urb->context;
- if (!ir) {
- usb_unlink_urb(urb);
- return;
- }
-
- buf_len = urb->actual_length;
-
- if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
- ir->send_flags = SEND_FLAG_COMPLETE;
- dev_dbg(ir->dev, "setup answer received %d bytes\n",
- buf_len);
- }
-
- switch (urb->status) {
- /* success */
- case 0:
- mceusb_process_ir_data(ir, buf_len);
- break;
-
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- usb_unlink_urb(urb);
- return;
-
- case -EPIPE:
- default:
- dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
- break;
- }
-
- usb_submit_urb(urb, GFP_ATOMIC);
-}
-
-static void mceusb_gen1_init(struct mceusb_dev *ir)
-{
- int ret;
- int maxp = ir->len_in;
- struct device *dev = ir->dev;
- char *data;
-
- data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
- if (!data) {
- dev_err(dev, "%s: memory allocation failed!\n", __func__);
- return;
- }
-
- /*
- * This is a strange one. Windows issues a set address to the device
- * on the receive control pipe and expect a certain value pair back
- */
- ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
- USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
- data, USB_CTRL_MSG_SZ, HZ * 3);
- dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
- dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
- __func__, data[0], data[1]);
-
- /* set feature: bit rate 38400 bps */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
- 0xc04e, 0x0000, NULL, 0, HZ * 3);
-
- dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
-
- /* bRequest 4: set char length to 8 bits */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- 4, USB_TYPE_VENDOR,
- 0x0808, 0x0000, NULL, 0, HZ * 3);
- dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
-
- /* bRequest 2: set handshaking to use DTR/DSR */
- ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
- 2, USB_TYPE_VENDOR,
- 0x0000, 0x0100, NULL, 0, HZ * 3);
- dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
-
- /* device reset */
- mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
- mce_sync_in(ir, NULL, maxp);
-
- /* get hw/sw revision? */
- mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
- mce_sync_in(ir, NULL, maxp);
-
- kfree(data);
-};
-
-static void mceusb_gen2_init(struct mceusb_dev *ir)
-{
- int maxp = ir->len_in;
-
- /* device reset */
- mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
- mce_sync_in(ir, NULL, maxp);
-
- /* get hw/sw revision? */
- mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
- mce_sync_in(ir, NULL, maxp);
-
- /* unknown what the next two actually return... */
- mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
- mce_sync_in(ir, NULL, maxp);
- mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
- mce_sync_in(ir, NULL, maxp);
-}
-
-static void mceusb_get_parameters(struct mceusb_dev *ir)
-{
- int maxp = ir->len_in;
-
- /* get the carrier and frequency */
- mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
- mce_sync_in(ir, NULL, maxp);
-
- if (!ir->flags.no_tx) {
- /* get the transmitter bitmask */
- mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
- mce_sync_in(ir, NULL, maxp);
- }
-
- /* get receiver timeout value */
- mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
- mce_sync_in(ir, NULL, maxp);
-
- /* get receiver sensor setting */
- mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
- mce_sync_in(ir, NULL, maxp);
-}
-
-static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
-{
- struct input_dev *idev;
- struct ir_dev_props *props;
- struct device *dev = ir->dev;
- const char *rc_map = RC_MAP_RC6_MCE;
- const char *name = "Media Center Ed. eHome Infrared Remote Transceiver";
- int ret = -ENODEV;
-
- idev = input_allocate_device();
- if (!idev) {
- dev_err(dev, "remote input dev allocation failed\n");
- goto idev_alloc_failed;
- }
-
- ret = -ENOMEM;
- props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
- if (!props) {
- dev_err(dev, "remote ir dev props allocation failed\n");
- goto props_alloc_failed;
- }
-
- if (mceusb_model[ir->model].name)
- name = mceusb_model[ir->model].name;
-
- snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
- name,
- le16_to_cpu(ir->usbdev->descriptor.idVendor),
- le16_to_cpu(ir->usbdev->descriptor.idProduct));
-
- idev->name = ir->name;
- usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
- strlcat(ir->phys, "/input0", sizeof(ir->phys));
- idev->phys = ir->phys;
-
- props->priv = ir;
- props->driver_type = RC_DRIVER_IR_RAW;
- props->allowed_protos = IR_TYPE_ALL;
- props->timeout = MS_TO_NS(1000);
- if (!ir->flags.no_tx) {
- props->s_tx_mask = mceusb_set_tx_mask;
- props->s_tx_carrier = mceusb_set_tx_carrier;
- props->tx_ir = mceusb_tx_ir;
- }
-
- ir->props = props;
-
- usb_to_input_id(ir->usbdev, &idev->id);
- idev->dev.parent = ir->dev;
-
- if (mceusb_model[ir->model].rc_map)
- rc_map = mceusb_model[ir->model].rc_map;
-
- ret = ir_input_register(idev, rc_map, props, DRIVER_NAME);
- if (ret < 0) {
- dev_err(dev, "remote input device register failed\n");
- goto irdev_failed;
- }
-
- return idev;
-
-irdev_failed:
- kfree(props);
-props_alloc_failed:
- input_free_device(idev);
-idev_alloc_failed:
- return NULL;
-}
-
-static int __devinit mceusb_dev_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- struct usb_host_interface *idesc;
- struct usb_endpoint_descriptor *ep = NULL;
- struct usb_endpoint_descriptor *ep_in = NULL;
- struct usb_endpoint_descriptor *ep_out = NULL;
- struct mceusb_dev *ir = NULL;
- int pipe, maxp, i;
- char buf[63], name[128] = "";
- enum mceusb_model_type model = id->driver_info;
- bool is_gen3;
- bool is_microsoft_gen1;
- bool tx_mask_normal;
- bool is_polaris;
-
- dev_dbg(&intf->dev, "%s called\n", __func__);
-
- idesc = intf->cur_altsetting;
-
- is_gen3 = mceusb_model[model].mce_gen3;
- is_microsoft_gen1 = mceusb_model[model].mce_gen1;
- tx_mask_normal = mceusb_model[model].tx_mask_normal;
- is_polaris = mceusb_model[model].is_polaris;
-
- if (is_polaris) {
- /* Interface 0 is IR */
- if (idesc->desc.bInterfaceNumber)
- return -ENODEV;
- }
-
- /* step through the endpoints to find first bulk in and out endpoint */
- for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
- ep = &idesc->endpoint[i].desc;
-
- if ((ep_in == NULL)
- && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_IN)
- && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)
- || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT))) {
-
- ep_in = ep;
- ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
- ep_in->bInterval = 1;
- dev_dbg(&intf->dev, "acceptable inbound endpoint "
- "found\n");
- }
-
- if ((ep_out == NULL)
- && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- == USB_DIR_OUT)
- && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)
- || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT))) {
-
- ep_out = ep;
- ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
- ep_out->bInterval = 1;
- dev_dbg(&intf->dev, "acceptable outbound endpoint "
- "found\n");
- }
- }
- if (ep_in == NULL) {
- dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
- return -ENODEV;
- }
-
- pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
- maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-
- ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
- if (!ir)
- goto mem_alloc_fail;
-
- ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in);
- if (!ir->buf_in)
- goto buf_in_alloc_fail;
-
- ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
- if (!ir->urb_in)
- goto urb_in_alloc_fail;
-
- ir->usbdev = dev;
- ir->dev = &intf->dev;
- ir->len_in = maxp;
- ir->flags.microsoft_gen1 = is_microsoft_gen1;
- ir->flags.tx_mask_normal = tx_mask_normal;
- ir->flags.no_tx = mceusb_model[model].no_tx;
- ir->model = model;
-
- /* Saving usb interface data for use by the transmitter routine */
- ir->usb_ep_in = ep_in;
- ir->usb_ep_out = ep_out;
-
- if (dev->descriptor.iManufacturer
- && usb_string(dev, dev->descriptor.iManufacturer,
- buf, sizeof(buf)) > 0)
- strlcpy(name, buf, sizeof(name));
- if (dev->descriptor.iProduct
- && usb_string(dev, dev->descriptor.iProduct,
- buf, sizeof(buf)) > 0)
- snprintf(name + strlen(name), sizeof(name) - strlen(name),
- " %s", buf);
-
- ir->idev = mceusb_init_input_dev(ir);
- if (!ir->idev)
- goto input_dev_fail;
-
- /* flush buffers on the device */
- mce_sync_in(ir, NULL, maxp);
- mce_sync_in(ir, NULL, maxp);
-
- /* wire up inbound data handler */
- usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
- maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
- ir->urb_in->transfer_dma = ir->dma_in;
- ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- /* initialize device */
- if (ir->flags.microsoft_gen1)
- mceusb_gen1_init(ir);
- else if (!is_gen3)
- mceusb_gen2_init(ir);
-
- mceusb_get_parameters(ir);
-
- if (!ir->flags.no_tx)
- mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
-
- usb_set_intfdata(intf, ir);
-
- dev_info(&intf->dev, "Registered %s on usb%d:%d\n", name,
- dev->bus->busnum, dev->devnum);
-
- return 0;
-
- /* Error-handling path */
-input_dev_fail:
- usb_free_urb(ir->urb_in);
-urb_in_alloc_fail:
- usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
-buf_in_alloc_fail:
- kfree(ir);
-mem_alloc_fail:
- dev_err(&intf->dev, "%s: device setup failed!\n", __func__);
-
- return -ENOMEM;
-}
-
-
-static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
-{
- struct usb_device *dev = interface_to_usbdev(intf);
- struct mceusb_dev *ir = usb_get_intfdata(intf);
-
- usb_set_intfdata(intf, NULL);
-
- if (!ir)
- return;
-
- ir->usbdev = NULL;
- ir_input_unregister(ir->idev);
- usb_kill_urb(ir->urb_in);
- usb_free_urb(ir->urb_in);
- usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
-
- kfree(ir);
-}
-
-static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message)
-{
- struct mceusb_dev *ir = usb_get_intfdata(intf);
- dev_info(ir->dev, "suspend\n");
- usb_kill_urb(ir->urb_in);
- return 0;
-}
-
-static int mceusb_dev_resume(struct usb_interface *intf)
-{
- struct mceusb_dev *ir = usb_get_intfdata(intf);
- dev_info(ir->dev, "resume\n");
- if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
- return -EIO;
- return 0;
-}
-
-static struct usb_driver mceusb_dev_driver = {
- .name = DRIVER_NAME,
- .probe = mceusb_dev_probe,
- .disconnect = mceusb_dev_disconnect,
- .suspend = mceusb_dev_suspend,
- .resume = mceusb_dev_resume,
- .reset_resume = mceusb_dev_resume,
- .id_table = mceusb_dev_table
-};
-
-static int __init mceusb_dev_init(void)
-{
- int ret;
-
- ret = usb_register(&mceusb_dev_driver);
- if (ret < 0)
- printk(KERN_ERR DRIVER_NAME
- ": usb register failed, result = %d\n", ret);
-
- return ret;
-}
-
-static void __exit mceusb_dev_exit(void)
-{
- usb_deregister(&mceusb_dev_driver);
-}
-
-module_init(mceusb_dev_init);
-module_exit(mceusb_dev_exit);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(usb, mceusb_dev_table);
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");
+++ /dev/null
-/*
- * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
- *
- * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
- * Copyright (C) 2009 Nuvoton PS Team
- *
- * Special thanks to Nuvoton for providing hardware, spec sheets and
- * sample code upon which portions of this driver are based. Indirect
- * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
- * modeled after.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
-#include <linux/pci_ids.h>
-
-#include "nuvoton-cir.h"
-
-static char *chip_id = "w836x7hg";
-
-/* write val to config reg */
-static inline void nvt_cr_write(struct nvt_dev *nvt, u8 val, u8 reg)
-{
- outb(reg, nvt->cr_efir);
- outb(val, nvt->cr_efdr);
-}
-
-/* read val from config reg */
-static inline u8 nvt_cr_read(struct nvt_dev *nvt, u8 reg)
-{
- outb(reg, nvt->cr_efir);
- return inb(nvt->cr_efdr);
-}
-
-/* update config register bit without changing other bits */
-static inline void nvt_set_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
-{
- u8 tmp = nvt_cr_read(nvt, reg) | val;
- nvt_cr_write(nvt, tmp, reg);
-}
-
-/* clear config register bit without changing other bits */
-static inline void nvt_clear_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
-{
- u8 tmp = nvt_cr_read(nvt, reg) & ~val;
- nvt_cr_write(nvt, tmp, reg);
-}
-
-/* enter extended function mode */
-static inline void nvt_efm_enable(struct nvt_dev *nvt)
-{
- /* Enabling Extended Function Mode explicitly requires writing 2x */
- outb(EFER_EFM_ENABLE, nvt->cr_efir);
- outb(EFER_EFM_ENABLE, nvt->cr_efir);
-}
-
-/* exit extended function mode */
-static inline void nvt_efm_disable(struct nvt_dev *nvt)
-{
- outb(EFER_EFM_DISABLE, nvt->cr_efir);
-}
-
-/*
- * When you want to address a specific logical device, write its logical
- * device number to CR_LOGICAL_DEV_SEL, then enable/disable by writing
- * 0x1/0x0 respectively to CR_LOGICAL_DEV_EN.
- */
-static inline void nvt_select_logical_dev(struct nvt_dev *nvt, u8 ldev)
-{
- outb(CR_LOGICAL_DEV_SEL, nvt->cr_efir);
- outb(ldev, nvt->cr_efdr);
-}
-
-/* write val to cir config register */
-static inline void nvt_cir_reg_write(struct nvt_dev *nvt, u8 val, u8 offset)
-{
- outb(val, nvt->cir_addr + offset);
-}
-
-/* read val from cir config register */
-static u8 nvt_cir_reg_read(struct nvt_dev *nvt, u8 offset)
-{
- u8 val;
-
- val = inb(nvt->cir_addr + offset);
-
- return val;
-}
-
-/* write val to cir wake register */
-static inline void nvt_cir_wake_reg_write(struct nvt_dev *nvt,
- u8 val, u8 offset)
-{
- outb(val, nvt->cir_wake_addr + offset);
-}
-
-/* read val from cir wake config register */
-static u8 nvt_cir_wake_reg_read(struct nvt_dev *nvt, u8 offset)
-{
- u8 val;
-
- val = inb(nvt->cir_wake_addr + offset);
-
- return val;
-}
-
-#define pr_reg(text, ...) \
- printk(KERN_INFO KBUILD_MODNAME ": " text, ## __VA_ARGS__)
-
-/* dump current cir register contents */
-static void cir_dump_regs(struct nvt_dev *nvt)
-{
- nvt_efm_enable(nvt);
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
-
- pr_reg("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME);
- pr_reg(" * CR CIR ACTIVE : 0x%x\n",
- nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
- pr_reg(" * CR CIR BASE ADDR: 0x%x\n",
- (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
- nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
- pr_reg(" * CR CIR IRQ NUM: 0x%x\n",
- nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
-
- nvt_efm_disable(nvt);
-
- pr_reg("%s: Dump CIR registers:\n", NVT_DRIVER_NAME);
- pr_reg(" * IRCON: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRCON));
- pr_reg(" * IRSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRSTS));
- pr_reg(" * IREN: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IREN));
- pr_reg(" * RXFCONT: 0x%x\n", nvt_cir_reg_read(nvt, CIR_RXFCONT));
- pr_reg(" * CP: 0x%x\n", nvt_cir_reg_read(nvt, CIR_CP));
- pr_reg(" * CC: 0x%x\n", nvt_cir_reg_read(nvt, CIR_CC));
- pr_reg(" * SLCH: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCH));
- pr_reg(" * SLCL: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCL));
- pr_reg(" * FIFOCON: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FIFOCON));
- pr_reg(" * IRFIFOSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFIFOSTS));
- pr_reg(" * SRXFIFO: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SRXFIFO));
- pr_reg(" * TXFCONT: 0x%x\n", nvt_cir_reg_read(nvt, CIR_TXFCONT));
- pr_reg(" * STXFIFO: 0x%x\n", nvt_cir_reg_read(nvt, CIR_STXFIFO));
- pr_reg(" * FCCH: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCH));
- pr_reg(" * FCCL: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCL));
- pr_reg(" * IRFSM: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFSM));
-}
-
-/* dump current cir wake register contents */
-static void cir_wake_dump_regs(struct nvt_dev *nvt)
-{
- u8 i, fifo_len;
-
- nvt_efm_enable(nvt);
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
-
- pr_reg("%s: Dump CIR WAKE logical device registers:\n",
- NVT_DRIVER_NAME);
- pr_reg(" * CR CIR WAKE ACTIVE : 0x%x\n",
- nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
- pr_reg(" * CR CIR WAKE BASE ADDR: 0x%x\n",
- (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
- nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
- pr_reg(" * CR CIR WAKE IRQ NUM: 0x%x\n",
- nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
-
- nvt_efm_disable(nvt);
-
- pr_reg("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME);
- pr_reg(" * IRCON: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON));
- pr_reg(" * IRSTS: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS));
- pr_reg(" * IREN: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN));
- pr_reg(" * FIFO CMP DEEP: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_DEEP));
- pr_reg(" * FIFO CMP TOL: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_TOL));
- pr_reg(" * FIFO COUNT: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT));
- pr_reg(" * SLCH: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCH));
- pr_reg(" * SLCL: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCL));
- pr_reg(" * FIFOCON: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON));
- pr_reg(" * SRXFSTS: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_SRXFSTS));
- pr_reg(" * SAMPLE RX FIFO: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_SAMPLE_RX_FIFO));
- pr_reg(" * WR FIFO DATA: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_WR_FIFO_DATA));
- pr_reg(" * RD FIFO ONLY: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
- pr_reg(" * RD FIFO ONLY IDX: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX));
- pr_reg(" * FIFO IGNORE: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_IGNORE));
- pr_reg(" * IRFSM: 0x%x\n",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRFSM));
-
- fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT);
- pr_reg("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME, fifo_len);
- pr_reg("* Contents = ");
- for (i = 0; i < fifo_len; i++)
- printk(KERN_CONT "%02x ",
- nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
- printk(KERN_CONT "\n");
-}
-
-/* detect hardware features */
-static int nvt_hw_detect(struct nvt_dev *nvt)
-{
- unsigned long flags;
- u8 chip_major, chip_minor;
- int ret = 0;
-
- nvt_efm_enable(nvt);
-
- /* Check if we're wired for the alternate EFER setup */
- chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
- if (chip_major == 0xff) {
- nvt->cr_efir = CR_EFIR2;
- nvt->cr_efdr = CR_EFDR2;
- nvt_efm_enable(nvt);
- chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
- }
-
- chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO);
- nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor);
-
- if (chip_major != CHIP_ID_HIGH &&
- (chip_minor != CHIP_ID_LOW || chip_minor != CHIP_ID_LOW2))
- ret = -ENODEV;
-
- nvt_efm_disable(nvt);
-
- spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt->chip_major = chip_major;
- nvt->chip_minor = chip_minor;
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
- return ret;
-}
-
-static void nvt_cir_ldev_init(struct nvt_dev *nvt)
-{
- u8 val;
-
- /* output pin selection (Pin95=CIRRX, Pin96=CIRTX1, WB enabled */
- val = nvt_cr_read(nvt, CR_OUTPUT_PIN_SEL);
- val &= OUTPUT_PIN_SEL_MASK;
- val |= (OUTPUT_ENABLE_CIR | OUTPUT_ENABLE_CIRWB);
- nvt_cr_write(nvt, val, CR_OUTPUT_PIN_SEL);
-
- /* Select CIR logical device and enable */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
- nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI);
- nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO);
-
- nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC);
-
- nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d",
- nvt->cir_addr, nvt->cir_irq);
-}
-
-static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt)
-{
- /* Select ACPI logical device, enable it and CIR Wake */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
- /* Enable CIR Wake via PSOUT# (Pin60) */
- nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
-
- /* enable cir interrupt of mouse/keyboard IRQ event */
- nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
-
- /* enable pme interrupt of cir wakeup event */
- nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
-
- /* Select CIR Wake logical device and enable */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
- nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI);
- nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO);
-
- nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC);
-
- nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d",
- nvt->cir_wake_addr, nvt->cir_wake_irq);
-}
-
-/* clear out the hardware's cir rx fifo */
-static void nvt_clear_cir_fifo(struct nvt_dev *nvt)
-{
- u8 val;
-
- val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
- nvt_cir_reg_write(nvt, val | CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
-}
-
-/* clear out the hardware's cir wake rx fifo */
-static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt)
-{
- u8 val;
-
- val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON);
- nvt_cir_wake_reg_write(nvt, val | CIR_WAKE_FIFOCON_RXFIFOCLR,
- CIR_WAKE_FIFOCON);
-}
-
-/* clear out the hardware's cir tx fifo */
-static void nvt_clear_tx_fifo(struct nvt_dev *nvt)
-{
- u8 val;
-
- val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
- nvt_cir_reg_write(nvt, val | CIR_FIFOCON_TXFIFOCLR, CIR_FIFOCON);
-}
-
-/* enable RX Trigger Level Reach and Packet End interrupts */
-static void nvt_set_cir_iren(struct nvt_dev *nvt)
-{
- u8 iren;
-
- iren = CIR_IREN_RTR | CIR_IREN_PE;
- nvt_cir_reg_write(nvt, iren, CIR_IREN);
-}
-
-static void nvt_cir_regs_init(struct nvt_dev *nvt)
-{
- /* set sample limit count (PE interrupt raised when reached) */
- nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_SLCH);
- nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_SLCL);
-
- /* set fifo irq trigger levels */
- nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV |
- CIR_FIFOCON_RX_TRIGGER_LEV, CIR_FIFOCON);
-
- /*
- * Enable TX and RX, specify carrier on = low, off = high, and set
- * sample period (currently 50us)
- */
- nvt_cir_reg_write(nvt,
- CIR_IRCON_TXEN | CIR_IRCON_RXEN |
- CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
- CIR_IRCON);
-
- /* clear hardware rx and tx fifos */
- nvt_clear_cir_fifo(nvt);
- nvt_clear_tx_fifo(nvt);
-
- /* clear any and all stray interrupts */
- nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
-
- /* and finally, enable interrupts */
- nvt_set_cir_iren(nvt);
-}
-
-static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
-{
- /* set number of bytes needed for wake key comparison (default 67) */
- nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_LEN, CIR_WAKE_FIFO_CMP_DEEP);
-
- /* set tolerance/variance allowed per byte during wake compare */
- nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE,
- CIR_WAKE_FIFO_CMP_TOL);
-
- /* set sample limit count (PE interrupt raised when reached) */
- nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH);
- nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL);
-
- /* set cir wake fifo rx trigger level (currently 67) */
- nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV,
- CIR_WAKE_FIFOCON);
-
- /*
- * Enable TX and RX, specific carrier on = low, off = high, and set
- * sample period (currently 50us)
- */
- nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
- CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
- CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
- CIR_WAKE_IRCON);
-
- /* clear cir wake rx fifo */
- nvt_clear_cir_wake_fifo(nvt);
-
- /* clear any and all stray interrupts */
- nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
-}
-
-static void nvt_enable_wake(struct nvt_dev *nvt)
-{
- nvt_efm_enable(nvt);
-
- nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
- nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
- nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
- nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
-
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
-
- nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
- CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
- CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
- CIR_WAKE_IRCON);
- nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
- nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
-}
-
-/* rx carrier detect only works in learning mode, must be called w/nvt_lock */
-static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt)
-{
- u32 count, carrier, duration = 0;
- int i;
-
- count = nvt_cir_reg_read(nvt, CIR_FCCL) |
- nvt_cir_reg_read(nvt, CIR_FCCH) << 8;
-
- for (i = 0; i < nvt->pkts; i++) {
- if (nvt->buf[i] & BUF_PULSE_BIT)
- duration += nvt->buf[i] & BUF_LEN_MASK;
- }
-
- duration *= SAMPLE_PERIOD;
-
- if (!count || !duration) {
- nvt_pr(KERN_NOTICE, "Unable to determine carrier! (c:%u, d:%u)",
- count, duration);
- return 0;
- }
-
- carrier = (count * 1000000) / duration;
-
- if ((carrier > MAX_CARRIER) || (carrier < MIN_CARRIER))
- nvt_dbg("WTF? Carrier frequency out of range!");
-
- nvt_dbg("Carrier frequency: %u (count %u, duration %u)",
- carrier, count, duration);
-
- return carrier;
-}
-
-/*
- * set carrier frequency
- *
- * set carrier on 2 registers: CP & CC
- * always set CP as 0x81
- * set CC by SPEC, CC = 3MHz/carrier - 1
- */
-static int nvt_set_tx_carrier(void *data, u32 carrier)
-{
- struct nvt_dev *nvt = data;
- u16 val;
-
- nvt_cir_reg_write(nvt, 1, CIR_CP);
- val = 3000000 / (carrier) - 1;
- nvt_cir_reg_write(nvt, val & 0xff, CIR_CC);
-
- nvt_dbg("cp: 0x%x cc: 0x%x\n",
- nvt_cir_reg_read(nvt, CIR_CP), nvt_cir_reg_read(nvt, CIR_CC));
-
- return 0;
-}
-
-/*
- * nvt_tx_ir
- *
- * 1) clean TX fifo first (handled by AP)
- * 2) copy data from user space
- * 3) disable RX interrupts, enable TX interrupts: TTR & TFU
- * 4) send 9 packets to TX FIFO to open TTR
- * in interrupt_handler:
- * 5) send all data out
- * go back to write():
- * 6) disable TX interrupts, re-enable RX interupts
- *
- * The key problem of this function is user space data may larger than
- * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to
- * buf, and keep current copied data buf num in cur_buf_num. But driver's buf
- * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
- * set TXFCONT as 0xff, until buf_count less than 0xff.
- */
-static int nvt_tx_ir(void *priv, int *txbuf, u32 n)
-{
- struct nvt_dev *nvt = priv;
- unsigned long flags;
- size_t cur_count;
- unsigned int i;
- u8 iren;
- int ret;
-
- spin_lock_irqsave(&nvt->tx.lock, flags);
-
- if (n >= TX_BUF_LEN) {
- nvt->tx.buf_count = cur_count = TX_BUF_LEN;
- ret = TX_BUF_LEN;
- } else {
- nvt->tx.buf_count = cur_count = n;
- ret = n;
- }
-
- memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count);
-
- nvt->tx.cur_buf_num = 0;
-
- /* save currently enabled interrupts */
- iren = nvt_cir_reg_read(nvt, CIR_IREN);
-
- /* now disable all interrupts, save TFU & TTR */
- nvt_cir_reg_write(nvt, CIR_IREN_TFU | CIR_IREN_TTR, CIR_IREN);
-
- nvt->tx.tx_state = ST_TX_REPLY;
-
- nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV_8 |
- CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
-
- /* trigger TTR interrupt by writing out ones, (yes, it's ugly) */
- for (i = 0; i < 9; i++)
- nvt_cir_reg_write(nvt, 0x01, CIR_STXFIFO);
-
- spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
- wait_event(nvt->tx.queue, nvt->tx.tx_state == ST_TX_REQUEST);
-
- spin_lock_irqsave(&nvt->tx.lock, flags);
- nvt->tx.tx_state = ST_TX_NONE;
- spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
- /* restore enabled interrupts to prior state */
- nvt_cir_reg_write(nvt, iren, CIR_IREN);
-
- return ret;
-}
-
-/* dump contents of the last rx buffer we got from the hw rx fifo */
-static void nvt_dump_rx_buf(struct nvt_dev *nvt)
-{
- int i;
-
- printk(KERN_DEBUG "%s (len %d): ", __func__, nvt->pkts);
- for (i = 0; (i < nvt->pkts) && (i < RX_BUF_LEN); i++)
- printk(KERN_CONT "0x%02x ", nvt->buf[i]);
- printk(KERN_CONT "\n");
-}
-
-/*
- * Process raw data in rx driver buffer, store it in raw IR event kfifo,
- * trigger decode when appropriate.
- *
- * We get IR data samples one byte at a time. If the msb is set, its a pulse,
- * otherwise its a space. The lower 7 bits are the count of SAMPLE_PERIOD
- * (default 50us) intervals for that pulse/space. A discrete signal is
- * followed by a series of 0x7f packets, then either 0x7<something> or 0x80
- * to signal more IR coming (repeats) or end of IR, respectively. We store
- * sample data in the raw event kfifo until we see 0x7<something> (except f)
- * or 0x80, at which time, we trigger a decode operation.
- */
-static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
-{
- DEFINE_IR_RAW_EVENT(rawir);
- unsigned int count;
- u32 carrier;
- u8 sample;
- int i;
-
- nvt_dbg_verbose("%s firing", __func__);
-
- if (debug)
- nvt_dump_rx_buf(nvt);
-
- if (nvt->carrier_detect_enabled)
- carrier = nvt_rx_carrier_detect(nvt);
-
- count = nvt->pkts;
- nvt_dbg_verbose("Processing buffer of len %d", count);
-
- init_ir_raw_event(&rawir);
-
- for (i = 0; i < count; i++) {
- nvt->pkts--;
- sample = nvt->buf[i];
-
- rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
- rawir.duration = (sample & BUF_LEN_MASK)
- * SAMPLE_PERIOD * 1000;
-
- if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) {
- if (nvt->rawir.pulse == rawir.pulse)
- nvt->rawir.duration += rawir.duration;
- else {
- nvt->rawir.duration = rawir.duration;
- nvt->rawir.pulse = rawir.pulse;
- }
- continue;
- }
-
- rawir.duration += nvt->rawir.duration;
-
- init_ir_raw_event(&nvt->rawir);
- nvt->rawir.duration = 0;
- nvt->rawir.pulse = rawir.pulse;
-
- if (sample == BUF_PULSE_BIT)
- rawir.pulse = false;
-
- if (rawir.duration) {
- nvt_dbg("Storing %s with duration %d",
- rawir.pulse ? "pulse" : "space",
- rawir.duration);
-
- ir_raw_event_store(nvt->rdev, &rawir);
- }
-
- /*
- * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE
- * indicates end of IR signal, but new data incoming. In both
- * cases, it means we're ready to call ir_raw_event_handle
- */
- if ((sample == BUF_PULSE_BIT) && nvt->pkts) {
- nvt_dbg("Calling ir_raw_event_handle (signal end)\n");
- ir_raw_event_handle(nvt->rdev);
- }
- }
-
- nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n");
- ir_raw_event_handle(nvt->rdev);
-
- if (nvt->pkts) {
- nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts);
- nvt->pkts = 0;
- }
-
- nvt_dbg_verbose("%s done", __func__);
-}
-
-static void nvt_handle_rx_fifo_overrun(struct nvt_dev *nvt)
-{
- nvt_pr(KERN_WARNING, "RX FIFO overrun detected, flushing data!");
-
- nvt->pkts = 0;
- nvt_clear_cir_fifo(nvt);
- ir_raw_event_reset(nvt->rdev);
-}
-
-/* copy data from hardware rx fifo into driver buffer */
-static void nvt_get_rx_ir_data(struct nvt_dev *nvt)
-{
- unsigned long flags;
- u8 fifocount, val;
- unsigned int b_idx;
- bool overrun = false;
- int i;
-
- /* Get count of how many bytes to read from RX FIFO */
- fifocount = nvt_cir_reg_read(nvt, CIR_RXFCONT);
- /* if we get 0xff, probably means the logical dev is disabled */
- if (fifocount == 0xff)
- return;
- /* watch out for a fifo overrun condition */
- else if (fifocount > RX_BUF_LEN) {
- overrun = true;
- fifocount = RX_BUF_LEN;
- }
-
- nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount);
-
- spin_lock_irqsave(&nvt->nvt_lock, flags);
-
- b_idx = nvt->pkts;
-
- /* This should never happen, but lets check anyway... */
- if (b_idx + fifocount > RX_BUF_LEN) {
- nvt_process_rx_ir_data(nvt);
- b_idx = 0;
- }
-
- /* Read fifocount bytes from CIR Sample RX FIFO register */
- for (i = 0; i < fifocount; i++) {
- val = nvt_cir_reg_read(nvt, CIR_SRXFIFO);
- nvt->buf[b_idx + i] = val;
- }
-
- nvt->pkts += fifocount;
- nvt_dbg("%s: pkts now %d", __func__, nvt->pkts);
-
- nvt_process_rx_ir_data(nvt);
-
- if (overrun)
- nvt_handle_rx_fifo_overrun(nvt);
-
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-}
-
-static void nvt_cir_log_irqs(u8 status, u8 iren)
-{
- nvt_pr(KERN_INFO, "IRQ 0x%02x (IREN 0x%02x) :%s%s%s%s%s%s%s%s%s",
- status, iren,
- status & CIR_IRSTS_RDR ? " RDR" : "",
- status & CIR_IRSTS_RTR ? " RTR" : "",
- status & CIR_IRSTS_PE ? " PE" : "",
- status & CIR_IRSTS_RFO ? " RFO" : "",
- status & CIR_IRSTS_TE ? " TE" : "",
- status & CIR_IRSTS_TTR ? " TTR" : "",
- status & CIR_IRSTS_TFU ? " TFU" : "",
- status & CIR_IRSTS_GH ? " GH" : "",
- status & ~(CIR_IRSTS_RDR | CIR_IRSTS_RTR | CIR_IRSTS_PE |
- CIR_IRSTS_RFO | CIR_IRSTS_TE | CIR_IRSTS_TTR |
- CIR_IRSTS_TFU | CIR_IRSTS_GH) ? " ?" : "");
-}
-
-static bool nvt_cir_tx_inactive(struct nvt_dev *nvt)
-{
- unsigned long flags;
- bool tx_inactive;
- u8 tx_state;
-
- spin_lock_irqsave(&nvt->tx.lock, flags);
- tx_state = nvt->tx.tx_state;
- spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
- tx_inactive = (tx_state == ST_TX_NONE);
-
- return tx_inactive;
-}
-
-/* interrupt service routine for incoming and outgoing CIR data */
-static irqreturn_t nvt_cir_isr(int irq, void *data)
-{
- struct nvt_dev *nvt = data;
- u8 status, iren, cur_state;
- unsigned long flags;
-
- nvt_dbg_verbose("%s firing", __func__);
-
- nvt_efm_enable(nvt);
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_efm_disable(nvt);
-
- /*
- * Get IR Status register contents. Write 1 to ack/clear
- *
- * bit: reg name - description
- * 7: CIR_IRSTS_RDR - RX Data Ready
- * 6: CIR_IRSTS_RTR - RX FIFO Trigger Level Reach
- * 5: CIR_IRSTS_PE - Packet End
- * 4: CIR_IRSTS_RFO - RX FIFO Overrun (RDR will also be set)
- * 3: CIR_IRSTS_TE - TX FIFO Empty
- * 2: CIR_IRSTS_TTR - TX FIFO Trigger Level Reach
- * 1: CIR_IRSTS_TFU - TX FIFO Underrun
- * 0: CIR_IRSTS_GH - Min Length Detected
- */
- status = nvt_cir_reg_read(nvt, CIR_IRSTS);
- if (!status) {
- nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__);
- nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
- return IRQ_RETVAL(IRQ_NONE);
- }
-
- /* ack/clear all irq flags we've got */
- nvt_cir_reg_write(nvt, status, CIR_IRSTS);
- nvt_cir_reg_write(nvt, 0, CIR_IRSTS);
-
- /* Interrupt may be shared with CIR Wake, bail if CIR not enabled */
- iren = nvt_cir_reg_read(nvt, CIR_IREN);
- if (!iren) {
- nvt_dbg_verbose("%s exiting, CIR not enabled", __func__);
- return IRQ_RETVAL(IRQ_NONE);
- }
-
- if (debug)
- nvt_cir_log_irqs(status, iren);
-
- if (status & CIR_IRSTS_RTR) {
- /* FIXME: add code for study/learn mode */
- /* We only do rx if not tx'ing */
- if (nvt_cir_tx_inactive(nvt))
- nvt_get_rx_ir_data(nvt);
- }
-
- if (status & CIR_IRSTS_PE) {
- if (nvt_cir_tx_inactive(nvt))
- nvt_get_rx_ir_data(nvt);
-
- spin_lock_irqsave(&nvt->nvt_lock, flags);
-
- cur_state = nvt->study_state;
-
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
- if (cur_state == ST_STUDY_NONE)
- nvt_clear_cir_fifo(nvt);
- }
-
- if (status & CIR_IRSTS_TE)
- nvt_clear_tx_fifo(nvt);
-
- if (status & CIR_IRSTS_TTR) {
- unsigned int pos, count;
- u8 tmp;
-
- spin_lock_irqsave(&nvt->tx.lock, flags);
-
- pos = nvt->tx.cur_buf_num;
- count = nvt->tx.buf_count;
-
- /* Write data into the hardware tx fifo while pos < count */
- if (pos < count) {
- nvt_cir_reg_write(nvt, nvt->tx.buf[pos], CIR_STXFIFO);
- nvt->tx.cur_buf_num++;
- /* Disable TX FIFO Trigger Level Reach (TTR) interrupt */
- } else {
- tmp = nvt_cir_reg_read(nvt, CIR_IREN);
- nvt_cir_reg_write(nvt, tmp & ~CIR_IREN_TTR, CIR_IREN);
- }
-
- spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
- }
-
- if (status & CIR_IRSTS_TFU) {
- spin_lock_irqsave(&nvt->tx.lock, flags);
- if (nvt->tx.tx_state == ST_TX_REPLY) {
- nvt->tx.tx_state = ST_TX_REQUEST;
- wake_up(&nvt->tx.queue);
- }
- spin_unlock_irqrestore(&nvt->tx.lock, flags);
- }
-
- nvt_dbg_verbose("%s done", __func__);
- return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-/* Interrupt service routine for CIR Wake */
-static irqreturn_t nvt_cir_wake_isr(int irq, void *data)
-{
- u8 status, iren, val;
- struct nvt_dev *nvt = data;
- unsigned long flags;
-
- nvt_dbg_wake("%s firing", __func__);
-
- status = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS);
- if (!status)
- return IRQ_RETVAL(IRQ_NONE);
-
- if (status & CIR_WAKE_IRSTS_IR_PENDING)
- nvt_clear_cir_wake_fifo(nvt);
-
- nvt_cir_wake_reg_write(nvt, status, CIR_WAKE_IRSTS);
- nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IRSTS);
-
- /* Interrupt may be shared with CIR, bail if Wake not enabled */
- iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN);
- if (!iren) {
- nvt_dbg_wake("%s exiting, wake not enabled", __func__);
- return IRQ_RETVAL(IRQ_HANDLED);
- }
-
- if ((status & CIR_WAKE_IRSTS_PE) &&
- (nvt->wake_state == ST_WAKE_START)) {
- while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)) {
- val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
- nvt_dbg("setting wake up key: 0x%x", val);
- }
-
- nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
- spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt->wake_state = ST_WAKE_FINISH;
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
- }
-
- nvt_dbg_wake("%s done", __func__);
- return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-static void nvt_enable_cir(struct nvt_dev *nvt)
-{
- /* set function enable flags */
- nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN |
- CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
- CIR_IRCON);
-
- nvt_efm_enable(nvt);
-
- /* enable the CIR logical device */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
-
- /* clear all pending interrupts */
- nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
-
- /* enable interrupts */
- nvt_set_cir_iren(nvt);
-}
-
-static void nvt_disable_cir(struct nvt_dev *nvt)
-{
- /* disable CIR interrupts */
- nvt_cir_reg_write(nvt, 0, CIR_IREN);
-
- /* clear any and all pending interrupts */
- nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
-
- /* clear all function enable flags */
- nvt_cir_reg_write(nvt, 0, CIR_IRCON);
-
- /* clear hardware rx and tx fifos */
- nvt_clear_cir_fifo(nvt);
- nvt_clear_tx_fifo(nvt);
-
- nvt_efm_enable(nvt);
-
- /* disable the CIR logical device */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
-}
-
-static int nvt_open(void *data)
-{
- struct nvt_dev *nvt = (struct nvt_dev *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt->in_use = true;
- nvt_enable_cir(nvt);
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
- return 0;
-}
-
-static void nvt_close(void *data)
-{
- struct nvt_dev *nvt = (struct nvt_dev *)data;
- unsigned long flags;
-
- spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt->in_use = false;
- nvt_disable_cir(nvt);
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-}
-
-/* Allocate memory, probe hardware, and initialize everything */
-static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
-{
- struct nvt_dev *nvt = NULL;
- struct input_dev *rdev = NULL;
- struct ir_dev_props *props = NULL;
- int ret = -ENOMEM;
-
- nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL);
- if (!nvt)
- return ret;
-
- props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
- if (!props)
- goto failure;
-
- /* input device for IR remote (and tx) */
- rdev = input_allocate_device();
- if (!rdev)
- goto failure;
-
- ret = -ENODEV;
- /* validate pnp resources */
- if (!pnp_port_valid(pdev, 0) ||
- pnp_port_len(pdev, 0) < CIR_IOREG_LENGTH) {
- dev_err(&pdev->dev, "IR PNP Port not valid!\n");
- goto failure;
- }
-
- if (!pnp_irq_valid(pdev, 0)) {
- dev_err(&pdev->dev, "PNP IRQ not valid!\n");
- goto failure;
- }
-
- if (!pnp_port_valid(pdev, 1) ||
- pnp_port_len(pdev, 1) < CIR_IOREG_LENGTH) {
- dev_err(&pdev->dev, "Wake PNP Port not valid!\n");
- goto failure;
- }
-
- nvt->cir_addr = pnp_port_start(pdev, 0);
- nvt->cir_irq = pnp_irq(pdev, 0);
-
- nvt->cir_wake_addr = pnp_port_start(pdev, 1);
- /* irq is always shared between cir and cir wake */
- nvt->cir_wake_irq = nvt->cir_irq;
-
- nvt->cr_efir = CR_EFIR;
- nvt->cr_efdr = CR_EFDR;
-
- spin_lock_init(&nvt->nvt_lock);
- spin_lock_init(&nvt->tx.lock);
- init_ir_raw_event(&nvt->rawir);
-
- ret = -EBUSY;
- /* now claim resources */
- if (!request_region(nvt->cir_addr,
- CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
- goto failure;
-
- if (request_irq(nvt->cir_irq, nvt_cir_isr, IRQF_SHARED,
- NVT_DRIVER_NAME, (void *)nvt))
- goto failure;
-
- if (!request_region(nvt->cir_wake_addr,
- CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
- goto failure;
-
- if (request_irq(nvt->cir_wake_irq, nvt_cir_wake_isr, IRQF_SHARED,
- NVT_DRIVER_NAME, (void *)nvt))
- goto failure;
-
- pnp_set_drvdata(pdev, nvt);
- nvt->pdev = pdev;
-
- init_waitqueue_head(&nvt->tx.queue);
-
- ret = nvt_hw_detect(nvt);
- if (ret)
- goto failure;
-
- /* Initialize CIR & CIR Wake Logical Devices */
- nvt_efm_enable(nvt);
- nvt_cir_ldev_init(nvt);
- nvt_cir_wake_ldev_init(nvt);
- nvt_efm_disable(nvt);
-
- /* Initialize CIR & CIR Wake Config Registers */
- nvt_cir_regs_init(nvt);
- nvt_cir_wake_regs_init(nvt);
-
- /* Set up ir-core props */
- props->priv = nvt;
- props->driver_type = RC_DRIVER_IR_RAW;
- props->allowed_protos = IR_TYPE_ALL;
- props->open = nvt_open;
- props->close = nvt_close;
-#if 0
- props->min_timeout = XYZ;
- props->max_timeout = XYZ;
- props->timeout = XYZ;
- /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
- props->rx_resolution = XYZ;
-
- /* tx bits */
- props->tx_resolution = XYZ;
-#endif
- props->tx_ir = nvt_tx_ir;
- props->s_tx_carrier = nvt_set_tx_carrier;
-
- rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver";
- rdev->id.bustype = BUS_HOST;
- rdev->id.vendor = PCI_VENDOR_ID_WINBOND2;
- rdev->id.product = nvt->chip_major;
- rdev->id.version = nvt->chip_minor;
-
- nvt->props = props;
- nvt->rdev = rdev;
-
- device_set_wakeup_capable(&pdev->dev, 1);
- device_set_wakeup_enable(&pdev->dev, 1);
-
- ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME);
- if (ret)
- goto failure;
-
- nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n");
- if (debug) {
- cir_dump_regs(nvt);
- cir_wake_dump_regs(nvt);
- }
-
- return 0;
-
-failure:
- if (nvt->cir_irq)
- free_irq(nvt->cir_irq, nvt);
- if (nvt->cir_addr)
- release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
-
- if (nvt->cir_wake_irq)
- free_irq(nvt->cir_wake_irq, nvt);
- if (nvt->cir_wake_addr)
- release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
-
- input_free_device(rdev);
- kfree(props);
- kfree(nvt);
-
- return ret;
-}
-
-static void __devexit nvt_remove(struct pnp_dev *pdev)
-{
- struct nvt_dev *nvt = pnp_get_drvdata(pdev);
- unsigned long flags;
-
- spin_lock_irqsave(&nvt->nvt_lock, flags);
- /* disable CIR */
- nvt_cir_reg_write(nvt, 0, CIR_IREN);
- nvt_disable_cir(nvt);
- /* enable CIR Wake (for IR power-on) */
- nvt_enable_wake(nvt);
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
- /* free resources */
- free_irq(nvt->cir_irq, nvt);
- free_irq(nvt->cir_wake_irq, nvt);
- release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
- release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
-
- ir_input_unregister(nvt->rdev);
-
- kfree(nvt->props);
- kfree(nvt);
-}
-
-static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state)
-{
- struct nvt_dev *nvt = pnp_get_drvdata(pdev);
- unsigned long flags;
-
- nvt_dbg("%s called", __func__);
-
- /* zero out misc state tracking */
- spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt->study_state = ST_STUDY_NONE;
- nvt->wake_state = ST_WAKE_NONE;
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
- spin_lock_irqsave(&nvt->tx.lock, flags);
- nvt->tx.tx_state = ST_TX_NONE;
- spin_unlock_irqrestore(&nvt->tx.lock, flags);
-
- /* disable all CIR interrupts */
- nvt_cir_reg_write(nvt, 0, CIR_IREN);
-
- nvt_efm_enable(nvt);
-
- /* disable cir logical dev */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
-
- /* make sure wake is enabled */
- nvt_enable_wake(nvt);
-
- return 0;
-}
-
-static int nvt_resume(struct pnp_dev *pdev)
-{
- int ret = 0;
- struct nvt_dev *nvt = pnp_get_drvdata(pdev);
-
- nvt_dbg("%s called", __func__);
-
- /* open interrupt */
- nvt_set_cir_iren(nvt);
-
- /* Enable CIR logical device */
- nvt_efm_enable(nvt);
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
-
- nvt_cir_regs_init(nvt);
- nvt_cir_wake_regs_init(nvt);
-
- return ret;
-}
-
-static void nvt_shutdown(struct pnp_dev *pdev)
-{
- struct nvt_dev *nvt = pnp_get_drvdata(pdev);
- nvt_enable_wake(nvt);
-}
-
-static const struct pnp_device_id nvt_ids[] = {
- { "WEC0530", 0 }, /* CIR */
- { "NTN0530", 0 }, /* CIR for new chip's pnp id*/
- { "", 0 },
-};
-
-static struct pnp_driver nvt_driver = {
- .name = NVT_DRIVER_NAME,
- .id_table = nvt_ids,
- .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
- .probe = nvt_probe,
- .remove = __devexit_p(nvt_remove),
- .suspend = nvt_suspend,
- .resume = nvt_resume,
- .shutdown = nvt_shutdown,
-};
-
-int nvt_init(void)
-{
- return pnp_register_driver(&nvt_driver);
-}
-
-void nvt_exit(void)
-{
- pnp_unregister_driver(&nvt_driver);
-}
-
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging output");
-
-MODULE_DEVICE_TABLE(pnp, nvt_ids);
-MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver");
-
-MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
-MODULE_LICENSE("GPL");
-
-module_init(nvt_init);
-module_exit(nvt_exit);
+++ /dev/null
-/*
- * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
- *
- * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
- * Copyright (C) 2009 Nuvoton PS Team
- *
- * Special thanks to Nuvoton for providing hardware, spec sheets and
- * sample code upon which portions of this driver are based. Indirect
- * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
- * modeled after.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/spinlock.h>
-#include <linux/ioctl.h>
-
-/* platform driver name to register */
-#define NVT_DRIVER_NAME "nuvoton-cir"
-
-/* debugging module parameter */
-static int debug;
-
-
-#define nvt_pr(level, text, ...) \
- printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
-
-#define nvt_dbg(text, ...) \
- if (debug) \
- printk(KERN_DEBUG \
- KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
-
-#define nvt_dbg_verbose(text, ...) \
- if (debug > 1) \
- printk(KERN_DEBUG \
- KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
-
-#define nvt_dbg_wake(text, ...) \
- if (debug > 2) \
- printk(KERN_DEBUG \
- KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
-
-
-/*
- * Original lirc driver said min value of 76, and recommended value of 256
- * for the buffer length, but then used 2048. Never mind that the size of the
- * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm
- * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes),
- * and I don't have TX-capable hardware to test/debug on...
- */
-#define TX_BUF_LEN 256
-#define RX_BUF_LEN 32
-
-struct nvt_dev {
- struct pnp_dev *pdev;
- struct input_dev *rdev;
- struct ir_dev_props *props;
- struct ir_raw_event rawir;
-
- spinlock_t nvt_lock;
- bool in_use;
-
- /* for rx */
- u8 buf[RX_BUF_LEN];
- unsigned int pkts;
-
- struct {
- spinlock_t lock;
- u8 buf[TX_BUF_LEN];
- unsigned int buf_count;
- unsigned int cur_buf_num;
- wait_queue_head_t queue;
- u8 tx_state;
- } tx;
-
- /* EFER Config register index/data pair */
- u8 cr_efir;
- u8 cr_efdr;
-
- /* hardware I/O settings */
- unsigned long cir_addr;
- unsigned long cir_wake_addr;
- int cir_irq;
- int cir_wake_irq;
-
- /* hardware id */
- u8 chip_major;
- u8 chip_minor;
-
- /* hardware features */
- bool hw_learning_capable;
- bool hw_tx_capable;
-
- /* rx settings */
- bool learning_enabled;
- bool carrier_detect_enabled;
-
- /* track cir wake state */
- u8 wake_state;
- /* for study */
- u8 study_state;
- /* carrier period = 1 / frequency */
- u32 carrier;
-};
-
-/* study states */
-#define ST_STUDY_NONE 0x0
-#define ST_STUDY_START 0x1
-#define ST_STUDY_CARRIER 0x2
-#define ST_STUDY_ALL_RECV 0x4
-
-/* wake states */
-#define ST_WAKE_NONE 0x0
-#define ST_WAKE_START 0x1
-#define ST_WAKE_FINISH 0x2
-
-/* receive states */
-#define ST_RX_WAIT_7F 0x1
-#define ST_RX_WAIT_HEAD 0x2
-#define ST_RX_WAIT_SILENT_END 0x4
-
-/* send states */
-#define ST_TX_NONE 0x0
-#define ST_TX_REQUEST 0x2
-#define ST_TX_REPLY 0x4
-
-/* buffer packet constants */
-#define BUF_PULSE_BIT 0x80
-#define BUF_LEN_MASK 0x7f
-#define BUF_REPEAT_BYTE 0x70
-#define BUF_REPEAT_MASK 0xf0
-
-/* CIR settings */
-
-/* total length of CIR and CIR WAKE */
-#define CIR_IOREG_LENGTH 0x0f
-
-/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */
-#define CIR_RX_LIMIT_COUNT 0x7d0
-
-/* CIR Regs */
-#define CIR_IRCON 0x00
-#define CIR_IRSTS 0x01
-#define CIR_IREN 0x02
-#define CIR_RXFCONT 0x03
-#define CIR_CP 0x04
-#define CIR_CC 0x05
-#define CIR_SLCH 0x06
-#define CIR_SLCL 0x07
-#define CIR_FIFOCON 0x08
-#define CIR_IRFIFOSTS 0x09
-#define CIR_SRXFIFO 0x0a
-#define CIR_TXFCONT 0x0b
-#define CIR_STXFIFO 0x0c
-#define CIR_FCCH 0x0d
-#define CIR_FCCL 0x0e
-#define CIR_IRFSM 0x0f
-
-/* CIR IRCON settings */
-#define CIR_IRCON_RECV 0x80
-#define CIR_IRCON_WIREN 0x40
-#define CIR_IRCON_TXEN 0x20
-#define CIR_IRCON_RXEN 0x10
-#define CIR_IRCON_WRXINV 0x08
-#define CIR_IRCON_RXINV 0x04
-
-#define CIR_IRCON_SAMPLE_PERIOD_SEL_1 0x00
-#define CIR_IRCON_SAMPLE_PERIOD_SEL_25 0x01
-#define CIR_IRCON_SAMPLE_PERIOD_SEL_50 0x02
-#define CIR_IRCON_SAMPLE_PERIOD_SEL_100 0x03
-
-/* FIXME: make this a runtime option */
-/* select sample period as 50us */
-#define CIR_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50
-
-/* CIR IRSTS settings */
-#define CIR_IRSTS_RDR 0x80
-#define CIR_IRSTS_RTR 0x40
-#define CIR_IRSTS_PE 0x20
-#define CIR_IRSTS_RFO 0x10
-#define CIR_IRSTS_TE 0x08
-#define CIR_IRSTS_TTR 0x04
-#define CIR_IRSTS_TFU 0x02
-#define CIR_IRSTS_GH 0x01
-
-/* CIR IREN settings */
-#define CIR_IREN_RDR 0x80
-#define CIR_IREN_RTR 0x40
-#define CIR_IREN_PE 0x20
-#define CIR_IREN_RFO 0x10
-#define CIR_IREN_TE 0x08
-#define CIR_IREN_TTR 0x04
-#define CIR_IREN_TFU 0x02
-#define CIR_IREN_GH 0x01
-
-/* CIR FIFOCON settings */
-#define CIR_FIFOCON_TXFIFOCLR 0x80
-
-#define CIR_FIFOCON_TX_TRIGGER_LEV_31 0x00
-#define CIR_FIFOCON_TX_TRIGGER_LEV_24 0x10
-#define CIR_FIFOCON_TX_TRIGGER_LEV_16 0x20
-#define CIR_FIFOCON_TX_TRIGGER_LEV_8 0x30
-
-/* FIXME: make this a runtime option */
-/* select TX trigger level as 16 */
-#define CIR_FIFOCON_TX_TRIGGER_LEV CIR_FIFOCON_TX_TRIGGER_LEV_16
-
-#define CIR_FIFOCON_RXFIFOCLR 0x08
-
-#define CIR_FIFOCON_RX_TRIGGER_LEV_1 0x00
-#define CIR_FIFOCON_RX_TRIGGER_LEV_8 0x01
-#define CIR_FIFOCON_RX_TRIGGER_LEV_16 0x02
-#define CIR_FIFOCON_RX_TRIGGER_LEV_24 0x03
-
-/* FIXME: make this a runtime option */
-/* select RX trigger level as 24 */
-#define CIR_FIFOCON_RX_TRIGGER_LEV CIR_FIFOCON_RX_TRIGGER_LEV_24
-
-/* CIR IRFIFOSTS settings */
-#define CIR_IRFIFOSTS_IR_PENDING 0x80
-#define CIR_IRFIFOSTS_RX_GS 0x40
-#define CIR_IRFIFOSTS_RX_FTA 0x20
-#define CIR_IRFIFOSTS_RX_EMPTY 0x10
-#define CIR_IRFIFOSTS_RX_FULL 0x08
-#define CIR_IRFIFOSTS_TX_FTA 0x04
-#define CIR_IRFIFOSTS_TX_EMPTY 0x02
-#define CIR_IRFIFOSTS_TX_FULL 0x01
-
-
-/* CIR WAKE UP Regs */
-#define CIR_WAKE_IRCON 0x00
-#define CIR_WAKE_IRSTS 0x01
-#define CIR_WAKE_IREN 0x02
-#define CIR_WAKE_FIFO_CMP_DEEP 0x03
-#define CIR_WAKE_FIFO_CMP_TOL 0x04
-#define CIR_WAKE_FIFO_COUNT 0x05
-#define CIR_WAKE_SLCH 0x06
-#define CIR_WAKE_SLCL 0x07
-#define CIR_WAKE_FIFOCON 0x08
-#define CIR_WAKE_SRXFSTS 0x09
-#define CIR_WAKE_SAMPLE_RX_FIFO 0x0a
-#define CIR_WAKE_WR_FIFO_DATA 0x0b
-#define CIR_WAKE_RD_FIFO_ONLY 0x0c
-#define CIR_WAKE_RD_FIFO_ONLY_IDX 0x0d
-#define CIR_WAKE_FIFO_IGNORE 0x0e
-#define CIR_WAKE_IRFSM 0x0f
-
-/* CIR WAKE UP IRCON settings */
-#define CIR_WAKE_IRCON_DEC_RST 0x80
-#define CIR_WAKE_IRCON_MODE1 0x40
-#define CIR_WAKE_IRCON_MODE0 0x20
-#define CIR_WAKE_IRCON_RXEN 0x10
-#define CIR_WAKE_IRCON_R 0x08
-#define CIR_WAKE_IRCON_RXINV 0x04
-
-/* FIXME/jarod: make this a runtime option */
-/* select a same sample period like cir register */
-#define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50
-
-/* CIR WAKE IRSTS Bits */
-#define CIR_WAKE_IRSTS_RDR 0x80
-#define CIR_WAKE_IRSTS_RTR 0x40
-#define CIR_WAKE_IRSTS_PE 0x20
-#define CIR_WAKE_IRSTS_RFO 0x10
-#define CIR_WAKE_IRSTS_GH 0x08
-#define CIR_WAKE_IRSTS_IR_PENDING 0x01
-
-/* CIR WAKE UP IREN Bits */
-#define CIR_WAKE_IREN_RDR 0x80
-#define CIR_WAKE_IREN_RTR 0x40
-#define CIR_WAKE_IREN_PE 0x20
-#define CIR_WAKE_IREN_RFO 0x10
-#define CIR_WAKE_IREN_TE 0x08
-#define CIR_WAKE_IREN_TTR 0x04
-#define CIR_WAKE_IREN_TFU 0x02
-#define CIR_WAKE_IREN_GH 0x01
-
-/* CIR WAKE FIFOCON settings */
-#define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08
-
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 0x00
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66 0x01
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65 0x02
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64 0x03
-
-/* FIXME: make this a runtime option */
-/* select WAKE UP RX trigger level as 67 */
-#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67
-
-/* CIR WAKE SRXFSTS settings */
-#define CIR_WAKE_IRFIFOSTS_RX_GS 0x80
-#define CIR_WAKE_IRFIFOSTS_RX_FTA 0x40
-#define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20
-#define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10
-
-/* CIR Wake FIFO buffer is 67 bytes long */
-#define CIR_WAKE_FIFO_LEN 67
-/* CIR Wake byte comparison tolerance */
-#define CIR_WAKE_CMP_TOLERANCE 5
-
-/*
- * Extended Function Enable Registers:
- * Extended Function Index Register
- * Extended Function Data Register
- */
-#define CR_EFIR 0x2e
-#define CR_EFDR 0x2f
-
-/* Possible alternate EFER values, depends on how the chip is wired */
-#define CR_EFIR2 0x4e
-#define CR_EFDR2 0x4f
-
-/* Extended Function Mode enable/disable magic values */
-#define EFER_EFM_ENABLE 0x87
-#define EFER_EFM_DISABLE 0xaa
-
-/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
-#define CHIP_ID_HIGH 0xb4
-#define CHIP_ID_LOW 0x72
-#define CHIP_ID_LOW2 0x73
-
-/* Config regs we need to care about */
-#define CR_SOFTWARE_RESET 0x02
-#define CR_LOGICAL_DEV_SEL 0x07
-#define CR_CHIP_ID_HI 0x20
-#define CR_CHIP_ID_LO 0x21
-#define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */
-#define CR_OUTPUT_PIN_SEL 0x27
-#define CR_LOGICAL_DEV_EN 0x30 /* valid for all logical devices */
-/* next three regs valid for both the CIR and CIR_WAKE logical devices */
-#define CR_CIR_BASE_ADDR_HI 0x60
-#define CR_CIR_BASE_ADDR_LO 0x61
-#define CR_CIR_IRQ_RSRC 0x70
-/* next three regs valid only for ACPI logical dev */
-#define CR_ACPI_CIR_WAKE 0xe0
-#define CR_ACPI_IRQ_EVENTS 0xf6
-#define CR_ACPI_IRQ_EVENTS2 0xf7
-
-/* Logical devices that we need to care about */
-#define LOGICAL_DEV_LPT 0x01
-#define LOGICAL_DEV_CIR 0x06
-#define LOGICAL_DEV_ACPI 0x0a
-#define LOGICAL_DEV_CIR_WAKE 0x0e
-
-#define LOGICAL_DEV_DISABLE 0x00
-#define LOGICAL_DEV_ENABLE 0x01
-
-#define CIR_WAKE_ENABLE_BIT 0x08
-#define CIR_INTR_MOUSE_IRQ_BIT 0x80
-#define PME_INTR_CIR_PASS_BIT 0x08
-
-#define OUTPUT_PIN_SEL_MASK 0xbc
-#define OUTPUT_ENABLE_CIR 0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */
-#define OUTPUT_ENABLE_CIRWB 0x40 /* enable wide-band sensor */
-
-/* MCE CIR signal length, related on sample period */
-
-/* MCE CIR controller signal length: about 43ms
- * 43ms / 50us (sample period) * 0.85 (inaccuracy)
- */
-#define CONTROLLER_BUF_LEN_MIN 830
-
-/* MCE CIR keyboard signal length: about 26ms
- * 26ms / 50us (sample period) * 0.85 (inaccuracy)
- */
-#define KEYBOARD_BUF_LEN_MAX 650
-#define KEYBOARD_BUF_LEN_MIN 610
-
-/* MCE CIR mouse signal length: about 24ms
- * 24ms / 50us (sample period) * 0.85 (inaccuracy)
- */
-#define MOUSE_BUF_LEN_MIN 565
-
-#define CIR_SAMPLE_PERIOD 50
-#define CIR_SAMPLE_LOW_INACCURACY 0.85
-
-/* MAX silence time that driver will sent to lirc */
-#define MAX_SILENCE_TIME 60000
-
-#if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100
-#define SAMPLE_PERIOD 100
-
-#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50
-#define SAMPLE_PERIOD 50
-
-#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25
-#define SAMPLE_PERIOD 25
-
-#else
-#define SAMPLE_PERIOD 1
-#endif
-
-/* as VISTA MCE definition, valid carrier value */
-#define MAX_CARRIER 60000
-#define MIN_CARRIER 30000
+++ /dev/null
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <media/ir-core.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-/* Used to handle IR raw handler extensions */
-static LIST_HEAD(rc_map_list);
-static DEFINE_SPINLOCK(rc_map_lock);
-
-static struct rc_keymap *seek_rc_map(const char *name)
-{
- struct rc_keymap *map = NULL;
-
- spin_lock(&rc_map_lock);
- list_for_each_entry(map, &rc_map_list, list) {
- if (!strcmp(name, map->map.name)) {
- spin_unlock(&rc_map_lock);
- return map;
- }
- }
- spin_unlock(&rc_map_lock);
-
- return NULL;
-}
-
-struct ir_scancode_table *get_rc_map(const char *name)
-{
-
- struct rc_keymap *map;
-
- map = seek_rc_map(name);
-#ifdef MODULE
- if (!map) {
- int rc = request_module(name);
- if (rc < 0) {
- printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
- return NULL;
- }
- msleep(20); /* Give some time for IR to register */
-
- map = seek_rc_map(name);
- }
-#endif
- if (!map) {
- printk(KERN_ERR "IR keymap %s not found\n", name);
- return NULL;
- }
-
- printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
-
- return &map->map;
-}
-EXPORT_SYMBOL_GPL(get_rc_map);
-
-int ir_register_map(struct rc_keymap *map)
-{
- spin_lock(&rc_map_lock);
- list_add_tail(&map->list, &rc_map_list);
- spin_unlock(&rc_map_lock);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ir_register_map);
-
-void ir_unregister_map(struct rc_keymap *map)
-{
- spin_lock(&rc_map_lock);
- list_del(&map->list);
- spin_unlock(&rc_map_lock);
-}
-EXPORT_SYMBOL_GPL(ir_unregister_map);
-
-
-static struct ir_scancode empty[] = {
- { 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
- .map = {
- .scan = empty,
- .size = ARRAY_SIZE(empty),
- .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
- .name = RC_MAP_EMPTY,
- }
-};
-
-int ir_rcmap_init(void)
-{
- return ir_register_map(&empty_map);
-}
-
-void ir_rcmap_cleanup(void)
-{
- ir_unregister_map(&empty_map);
-}
+++ /dev/null
-/*
- * Streamzap Remote Control driver
- *
- * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
- * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
- *
- * This driver was based on the work of Greg Wickham and Adrian
- * Dewhurst. It was substantially rewritten to support correct signal
- * gaps and now maintains a delay buffer, which is used to present
- * consistent timing behaviour to user space applications. Without the
- * delay buffer an ugly hack would be required in lircd, which can
- * cause sluggish signal decoding in certain situations.
- *
- * Ported to in-kernel ir-core interface by Jarod Wilson
- *
- * This driver is based on the USB skeleton driver packaged with the
- * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/ir-core.h>
-
-#define DRIVER_VERSION "1.61"
-#define DRIVER_NAME "streamzap"
-#define DRIVER_DESC "Streamzap Remote Control driver"
-
-#ifdef CONFIG_USB_DEBUG
-static int debug = 1;
-#else
-static int debug;
-#endif
-
-#define USB_STREAMZAP_VENDOR_ID 0x0e9c
-#define USB_STREAMZAP_PRODUCT_ID 0x0000
-
-/* table of devices that work with this driver */
-static struct usb_device_id streamzap_table[] = {
- /* Streamzap Remote Control */
- { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
- /* Terminating entry */
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, streamzap_table);
-
-#define SZ_PULSE_MASK 0xf0
-#define SZ_SPACE_MASK 0x0f
-#define SZ_TIMEOUT 0xff
-#define SZ_RESOLUTION 256
-
-/* number of samples buffered */
-#define SZ_BUF_LEN 128
-
-/* from ir-rc5-sz-decoder.c */
-#ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
-#define load_rc5_sz_decode() request_module("ir-rc5-sz-decoder")
-#else
-#define load_rc5_sz_decode() 0
-#endif
-
-enum StreamzapDecoderState {
- PulseSpace,
- FullPulse,
- FullSpace,
- IgnorePulse
-};
-
-/* structure to hold our device specific stuff */
-struct streamzap_ir {
-
- /* ir-core */
- struct ir_dev_props *props;
-
- /* core device info */
- struct device *dev;
- struct input_dev *idev;
-
- /* usb */
- struct usb_device *usbdev;
- struct usb_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- struct urb *urb_in;
-
- /* buffer & dma */
- unsigned char *buf_in;
- dma_addr_t dma_in;
- unsigned int buf_in_len;
-
- /* track what state we're in */
- enum StreamzapDecoderState decoder_state;
- /* tracks whether we are currently receiving some signal */
- bool idle;
- /* sum of signal lengths received since signal start */
- unsigned long sum;
- /* start time of signal; necessary for gap tracking */
- struct timeval signal_last;
- struct timeval signal_start;
- bool timeout_enabled;
-
- char name[128];
- char phys[64];
-};
-
-
-/* local function prototypes */
-static int streamzap_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-static void streamzap_disconnect(struct usb_interface *interface);
-static void streamzap_callback(struct urb *urb);
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
-static int streamzap_resume(struct usb_interface *intf);
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver streamzap_driver = {
- .name = DRIVER_NAME,
- .probe = streamzap_probe,
- .disconnect = streamzap_disconnect,
- .suspend = streamzap_suspend,
- .resume = streamzap_resume,
- .id_table = streamzap_table,
-};
-
-static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
-{
- dev_dbg(sz->dev, "Storing %s with duration %u us\n",
- (rawir.pulse ? "pulse" : "space"), rawir.duration);
- ir_raw_event_store_with_filter(sz->idev, &rawir);
-}
-
-static void sz_push_full_pulse(struct streamzap_ir *sz,
- unsigned char value)
-{
- DEFINE_IR_RAW_EVENT(rawir);
-
- if (sz->idle) {
- long deltv;
-
- sz->signal_last = sz->signal_start;
- do_gettimeofday(&sz->signal_start);
-
- deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
- rawir.pulse = false;
- if (deltv > 15) {
- /* really long time */
- rawir.duration = IR_MAX_DURATION;
- } else {
- rawir.duration = (int)(deltv * 1000000 +
- sz->signal_start.tv_usec -
- sz->signal_last.tv_usec);
- rawir.duration -= sz->sum;
- rawir.duration *= 1000;
- rawir.duration &= IR_MAX_DURATION;
- }
- sz_push(sz, rawir);
-
- sz->idle = false;
- sz->sum = 0;
- }
-
- rawir.pulse = true;
- rawir.duration = ((int) value) * SZ_RESOLUTION;
- rawir.duration += SZ_RESOLUTION / 2;
- sz->sum += rawir.duration;
- rawir.duration *= 1000;
- rawir.duration &= IR_MAX_DURATION;
- sz_push(sz, rawir);
-}
-
-static void sz_push_half_pulse(struct streamzap_ir *sz,
- unsigned char value)
-{
- sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
-}
-
-static void sz_push_full_space(struct streamzap_ir *sz,
- unsigned char value)
-{
- DEFINE_IR_RAW_EVENT(rawir);
-
- rawir.pulse = false;
- rawir.duration = ((int) value) * SZ_RESOLUTION;
- rawir.duration += SZ_RESOLUTION / 2;
- sz->sum += rawir.duration;
- rawir.duration *= 1000;
- sz_push(sz, rawir);
-}
-
-static void sz_push_half_space(struct streamzap_ir *sz,
- unsigned long value)
-{
- sz_push_full_space(sz, value & SZ_SPACE_MASK);
-}
-
-/**
- * streamzap_callback - usb IRQ handler callback
- *
- * This procedure is invoked on reception of data from
- * the usb remote.
- */
-static void streamzap_callback(struct urb *urb)
-{
- struct streamzap_ir *sz;
- unsigned int i;
- int len;
-
- if (!urb)
- return;
-
- sz = urb->context;
- len = urb->actual_length;
-
- switch (urb->status) {
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /*
- * this urb is terminated, clean up.
- * sz might already be invalid at this point
- */
- dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
- return;
- default:
- break;
- }
-
- dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
- for (i = 0; i < len; i++) {
- dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
- i, (unsigned char)sz->buf_in[i]);
- switch (sz->decoder_state) {
- case PulseSpace:
- if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
- SZ_PULSE_MASK) {
- sz->decoder_state = FullPulse;
- continue;
- } else if ((sz->buf_in[i] & SZ_SPACE_MASK)
- == SZ_SPACE_MASK) {
- sz_push_half_pulse(sz, sz->buf_in[i]);
- sz->decoder_state = FullSpace;
- continue;
- } else {
- sz_push_half_pulse(sz, sz->buf_in[i]);
- sz_push_half_space(sz, sz->buf_in[i]);
- }
- break;
- case FullPulse:
- sz_push_full_pulse(sz, sz->buf_in[i]);
- sz->decoder_state = IgnorePulse;
- break;
- case FullSpace:
- if (sz->buf_in[i] == SZ_TIMEOUT) {
- DEFINE_IR_RAW_EVENT(rawir);
-
- rawir.pulse = false;
- rawir.duration = sz->props->timeout;
- sz->idle = true;
- if (sz->timeout_enabled)
- sz_push(sz, rawir);
- ir_raw_event_handle(sz->idev);
- } else {
- sz_push_full_space(sz, sz->buf_in[i]);
- }
- sz->decoder_state = PulseSpace;
- break;
- case IgnorePulse:
- if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
- SZ_SPACE_MASK) {
- sz->decoder_state = FullSpace;
- continue;
- }
- sz_push_half_space(sz, sz->buf_in[i]);
- sz->decoder_state = PulseSpace;
- break;
- }
- }
-
- usb_submit_urb(urb, GFP_ATOMIC);
-
- return;
-}
-
-static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
-{
- struct input_dev *idev;
- struct ir_dev_props *props;
- struct device *dev = sz->dev;
- int ret;
-
- idev = input_allocate_device();
- if (!idev) {
- dev_err(dev, "remote input dev allocation failed\n");
- goto idev_alloc_failed;
- }
-
- props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
- if (!props) {
- dev_err(dev, "remote ir dev props allocation failed\n");
- goto props_alloc_failed;
- }
-
- snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
- "Receiver (%04x:%04x)",
- le16_to_cpu(sz->usbdev->descriptor.idVendor),
- le16_to_cpu(sz->usbdev->descriptor.idProduct));
-
- idev->name = sz->name;
- usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
- strlcat(sz->phys, "/input0", sizeof(sz->phys));
- idev->phys = sz->phys;
-
- props->priv = sz;
- props->driver_type = RC_DRIVER_IR_RAW;
- props->allowed_protos = IR_TYPE_ALL;
-
- sz->props = props;
-
- usb_to_input_id(sz->usbdev, &idev->id);
- idev->dev.parent = sz->dev;
-
- ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
- if (ret < 0) {
- dev_err(dev, "remote input device register failed\n");
- goto irdev_failed;
- }
-
- return idev;
-
-irdev_failed:
- kfree(props);
-props_alloc_failed:
- input_free_device(idev);
-idev_alloc_failed:
- return NULL;
-}
-
-/**
- * streamzap_probe
- *
- * Called by usb-core to associated with a candidate device
- * On any failure the return value is the ERROR
- * On success return 0
- */
-static int __devinit streamzap_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *usbdev = interface_to_usbdev(intf);
- struct usb_host_interface *iface_host;
- struct streamzap_ir *sz = NULL;
- char buf[63], name[128] = "";
- int retval = -ENOMEM;
- int pipe, maxp;
-
- /* Allocate space for device driver specific data */
- sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
- if (!sz)
- return -ENOMEM;
-
- sz->usbdev = usbdev;
- sz->interface = intf;
-
- /* Check to ensure endpoint information matches requirements */
- iface_host = intf->cur_altsetting;
-
- if (iface_host->desc.bNumEndpoints != 1) {
- dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
- __func__, iface_host->desc.bNumEndpoints);
- retval = -ENODEV;
- goto free_sz;
- }
-
- sz->endpoint = &(iface_host->endpoint[0].desc);
- if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
- != USB_DIR_IN) {
- dev_err(&intf->dev, "%s: endpoint doesn't match input device "
- "02%02x\n", __func__, sz->endpoint->bEndpointAddress);
- retval = -ENODEV;
- goto free_sz;
- }
-
- if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_INT) {
- dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
- "02%02x\n", __func__, sz->endpoint->bmAttributes);
- retval = -ENODEV;
- goto free_sz;
- }
-
- pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
- maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
-
- if (maxp == 0) {
- dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
- __func__);
- retval = -ENODEV;
- goto free_sz;
- }
-
- /* Allocate the USB buffer and IRQ URB */
- sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
- if (!sz->buf_in)
- goto free_sz;
-
- sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
- if (!sz->urb_in)
- goto free_buf_in;
-
- sz->dev = &intf->dev;
- sz->buf_in_len = maxp;
-
- if (usbdev->descriptor.iManufacturer
- && usb_string(usbdev, usbdev->descriptor.iManufacturer,
- buf, sizeof(buf)) > 0)
- strlcpy(name, buf, sizeof(name));
-
- if (usbdev->descriptor.iProduct
- && usb_string(usbdev, usbdev->descriptor.iProduct,
- buf, sizeof(buf)) > 0)
- snprintf(name + strlen(name), sizeof(name) - strlen(name),
- " %s", buf);
-
- sz->idev = streamzap_init_input_dev(sz);
- if (!sz->idev)
- goto input_dev_fail;
-
- sz->idle = true;
- sz->decoder_state = PulseSpace;
- /* FIXME: don't yet have a way to set this */
- sz->timeout_enabled = true;
- sz->props->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
- IR_MAX_DURATION) | 0x03000000);
- #if 0
- /* not yet supported, depends on patches from maxim */
- /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
- sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
- sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
- #endif
-
- do_gettimeofday(&sz->signal_start);
-
- /* Complete final initialisations */
- usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
- maxp, (usb_complete_t)streamzap_callback,
- sz, sz->endpoint->bInterval);
- sz->urb_in->transfer_dma = sz->dma_in;
- sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- usb_set_intfdata(intf, sz);
-
- if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
- dev_err(sz->dev, "urb submit failed\n");
-
- dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
- usbdev->bus->busnum, usbdev->devnum);
-
- /* Load the streamzap not-quite-rc5 decoder too */
- load_rc5_sz_decode();
-
- return 0;
-
-input_dev_fail:
- usb_free_urb(sz->urb_in);
-free_buf_in:
- usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
-free_sz:
- kfree(sz);
-
- return retval;
-}
-
-/**
- * streamzap_disconnect
- *
- * Called by the usb core when the device is removed from the system.
- *
- * This routine guarantees that the driver will not submit any more urbs
- * by clearing dev->usbdev. It is also supposed to terminate any currently
- * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
- * does not provide any way to do this.
- */
-static void streamzap_disconnect(struct usb_interface *interface)
-{
- struct streamzap_ir *sz = usb_get_intfdata(interface);
- struct usb_device *usbdev = interface_to_usbdev(interface);
-
- usb_set_intfdata(interface, NULL);
-
- if (!sz)
- return;
-
- sz->usbdev = NULL;
- ir_input_unregister(sz->idev);
- usb_kill_urb(sz->urb_in);
- usb_free_urb(sz->urb_in);
- usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
-
- kfree(sz);
-}
-
-static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
-{
- struct streamzap_ir *sz = usb_get_intfdata(intf);
-
- usb_kill_urb(sz->urb_in);
-
- return 0;
-}
-
-static int streamzap_resume(struct usb_interface *intf)
-{
- struct streamzap_ir *sz = usb_get_intfdata(intf);
-
- if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
- dev_err(sz->dev, "Error sumbiting urb\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * streamzap_init
- */
-static int __init streamzap_init(void)
-{
- int ret;
-
- /* register this driver with the USB subsystem */
- ret = usb_register(&streamzap_driver);
- if (ret < 0)
- printk(KERN_ERR DRIVER_NAME ": usb register failed, "
- "result = %d\n", ret);
-
- return ret;
-}
-
-/**
- * streamzap_exit
- */
-static void __exit streamzap_exit(void)
-{
- usb_deregister(&streamzap_driver);
-}
-
-
-module_init(streamzap_init);
-module_exit(streamzap_exit);
-
-MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging messages");
comment "Multimedia drivers"
source "drivers/media/common/Kconfig"
-source "drivers/media/IR/Kconfig"
+source "drivers/media/rc/Kconfig"
#
# Tuner drivers for DVB and V4L
# Makefile for the kernel multimedia device drivers.
#
-obj-y += common/ IR/ video/
+obj-y += common/ rc/ video/
obj-$(CONFIG_VIDEO_DEV) += radio/
obj-$(CONFIG_DVB_CORE) += dvb/
--- /dev/null
+menuconfig IR_CORE
+ tristate "Infrared remote controller adapters"
+ depends on INPUT
+ default INPUT
+ ---help---
+ Enable support for Remote Controllers on Linux. This is
+ needed in order to support several video capture adapters.
+
+ Enable this option if you have a video capture board even
+ if you don't need IR, as otherwise, you may not be able to
+ compile the driver for your adapter.
+
+config IR_LEGACY
+ tristate
+ depends on IR_CORE
+ default IR_CORE
+
+if IR_CORE
+
+config LIRC
+ tristate
+ default y
+
+ ---help---
+ Enable this option to build the Linux Infrared Remote
+ Control (LIRC) core device interface driver. The LIRC
+ interface passes raw IR to and from userspace, where the
+ LIRC daemon handles protocol decoding for IR reception and
+ encoding for IR transmitting (aka "blasting").
+
+source "drivers/media/rc/keymaps/Kconfig"
+
+config IR_NEC_DECODER
+ tristate "Enable IR raw decoder for the NEC protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with NEC protocol, and
+ if the IR is decoded in software
+
+config IR_RC5_DECODER
+ tristate "Enable IR raw decoder for the RC-5 protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with RC-5 protocol, and
+ if the IR is decoded in software
+
+config IR_RC6_DECODER
+ tristate "Enable IR raw decoder for the RC6 protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the RC6 protocol, and you need software decoding support.
+
+config IR_JVC_DECODER
+ tristate "Enable IR raw decoder for the JVC protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the JVC protocol, and you need software decoding support.
+
+config IR_SONY_DECODER
+ tristate "Enable IR raw decoder for the Sony protocol"
+ depends on IR_CORE
+ default y
+
+ ---help---
+ Enable this option if you have an infrared remote control which
+ uses the Sony protocol, and you need software decoding support.
+
+config IR_RC5_SZ_DECODER
+ tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
+ depends on IR_CORE
+ select BITREVERSE
+ default y
+
+ ---help---
+ Enable this option if you have IR with RC-5 (streamzap) protocol,
+ and if the IR is decoded in software. (The Streamzap PC Remote
+ uses an IR protocol that is almost standard RC-5, but not quite,
+ as it uses an additional bit).
+
+config IR_LIRC_CODEC
+ tristate "Enable IR to LIRC bridge"
+ depends on IR_CORE
+ depends on LIRC
+ default y
+
+ ---help---
+ Enable this option to pass raw IR to and from userspace via
+ the LIRC interface.
+
+config IR_ENE
+ tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
+ depends on PNP
+ depends on IR_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transceiver made by ENE.
+
+ You can see if you have it by looking at lspnp output.
+ Output should include ENE0100 ENE0200 or something similar.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ene_ir.
+
+config IR_IMON
+ tristate "SoundGraph iMON Receiver and Display"
+ depends on USB_ARCH_HAS_HCD
+ depends on IR_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
+ IR Receiver and/or LCD/VFD/VGA display.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imon.
+
+config IR_MCEUSB
+ tristate "Windows Media Center Ed. eHome Infrared Transceiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on IR_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a Windows Media Center Edition
+ eHome Infrared Transceiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mceusb.
+
+config IR_NUVOTON
+ tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
+ depends on PNP
+ depends on IR_CORE
+ ---help---
+ Say Y here to enable support for integrated infrared receiver
+ /transciever made by Nuvoton (formerly Winbond). This chip is
+ found in the ASRock ION 330HT, as well as assorted Intel
+ DP55-series motherboards (and of course, possibly others).
+
+ To compile this driver as a module, choose M here: the
+ module will be called nuvoton-cir.
+
+config IR_STREAMZAP
+ tristate "Streamzap PC Remote IR Receiver"
+ depends on USB_ARCH_HAS_HCD
+ depends on IR_CORE
+ select USB
+ ---help---
+ Say Y here if you want to use a Streamzap PC Remote
+ Infrared Receiver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called streamzap.
+
+endif #IR_CORE
--- /dev/null
+ir-common-objs := ir-functions.o
+ir-core-objs := ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
+
+obj-y += keymaps/
+
+obj-$(CONFIG_IR_CORE) += ir-core.o
+obj-$(CONFIG_IR_LEGACY) += ir-common.o
+obj-$(CONFIG_LIRC) += lirc_dev.o
+obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
+obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
+obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
+obj-$(CONFIG_IR_JVC_DECODER) += ir-jvc-decoder.o
+obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
+obj-$(CONFIG_IR_RC5_SZ_DECODER) += ir-rc5-sz-decoder.o
+obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
+
+# stand-alone IR receivers/transmitters
+obj-$(CONFIG_IR_IMON) += imon.o
+obj-$(CONFIG_IR_MCEUSB) += mceusb.o
+obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
+obj-$(CONFIG_IR_ENE) += ene_ir.o
+obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
--- /dev/null
+/*
+ * driver for ENE KB3926 B/C/D/E/F CIR (pnp id: ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ * Special thanks to:
+ * Sami R. <maesesami@gmail.com> for lot of help in debugging and therefore
+ * bringing to life support for transmission & learning mode.
+ *
+ * Charlie Andrews <charliethepilot@googlemail.com> for lots of help in
+ * bringing up the support of new firmware buffer that is popular
+ * on latest notebooks
+ *
+ * ENE for partial device documentation
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <media/ir-common.h>
+#include "ene_ir.h"
+
+static int sample_period;
+static bool learning_mode_force;
+static int debug;
+static bool txsim;
+
+static void ene_set_reg_addr(struct ene_device *dev, u16 reg)
+{
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+}
+
+/* read a hardware register */
+static u8 ene_read_reg(struct ene_device *dev, u16 reg)
+{
+ u8 retval;
+ ene_set_reg_addr(dev, reg);
+ retval = inb(dev->hw_io + ENE_IO);
+ dbg_regs("reg %04x == %02x", reg, retval);
+ return retval;
+}
+
+/* write a hardware register */
+static void ene_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+ dbg_regs("reg %04x <- %02x", reg, value);
+ ene_set_reg_addr(dev, reg);
+ outb(value, dev->hw_io + ENE_IO);
+}
+
+/* Set bits in hardware register */
+static void ene_set_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
+{
+ dbg_regs("reg %04x |= %02x", reg, mask);
+ ene_set_reg_addr(dev, reg);
+ outb(inb(dev->hw_io + ENE_IO) | mask, dev->hw_io + ENE_IO);
+}
+
+/* Clear bits in hardware register */
+static void ene_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask)
+{
+ dbg_regs("reg %04x &= ~%02x ", reg, mask);
+ ene_set_reg_addr(dev, reg);
+ outb(inb(dev->hw_io + ENE_IO) & ~mask, dev->hw_io + ENE_IO);
+}
+
+/* A helper to set/clear a bit in register according to boolean variable */
+static void ene_set_clear_reg_mask(struct ene_device *dev, u16 reg, u8 mask,
+ bool set)
+{
+ if (set)
+ ene_set_reg_mask(dev, reg, mask);
+ else
+ ene_clear_reg_mask(dev, reg, mask);
+}
+
+/* detect hardware features */
+static int ene_hw_detect(struct ene_device *dev)
+{
+ u8 chip_major, chip_minor;
+ u8 hw_revision, old_ver;
+ u8 fw_reg2, fw_reg1;
+
+ ene_clear_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
+ chip_major = ene_read_reg(dev, ENE_ECVER_MAJOR);
+ chip_minor = ene_read_reg(dev, ENE_ECVER_MINOR);
+ ene_set_reg_mask(dev, ENE_ECSTS, ENE_ECSTS_RSRVD);
+
+ hw_revision = ene_read_reg(dev, ENE_ECHV);
+ old_ver = ene_read_reg(dev, ENE_HW_VER_OLD);
+
+ dev->pll_freq = (ene_read_reg(dev, ENE_PLLFRH) << 4) +
+ (ene_read_reg(dev, ENE_PLLFRL) >> 4);
+
+ if (sample_period != ENE_DEFAULT_SAMPLE_PERIOD)
+ dev->rx_period_adjust =
+ dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 2 : 4;
+
+ if (hw_revision == 0xFF) {
+ ene_warn("device seems to be disabled");
+ ene_warn("send a mail to lirc-list@lists.sourceforge.net");
+ ene_warn("please attach output of acpidump and dmidecode");
+ return -ENODEV;
+ }
+
+ ene_notice("chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x",
+ chip_major, chip_minor, old_ver, hw_revision);
+
+ ene_notice("PLL freq = %d", dev->pll_freq);
+
+ if (chip_major == 0x33) {
+ ene_warn("chips 0x33xx aren't supported");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_C;
+ ene_notice("KB3926C detected");
+ } else if (old_ver == 0x24 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_B;
+ ene_notice("KB3926B detected");
+ } else {
+ dev->hw_revision = ENE_HW_D;
+ ene_notice("KB3926D or higher detected");
+ }
+
+ /* detect features hardware supports */
+ if (dev->hw_revision < ENE_HW_C)
+ return 0;
+
+ fw_reg1 = ene_read_reg(dev, ENE_FW1);
+ fw_reg2 = ene_read_reg(dev, ENE_FW2);
+
+ ene_notice("Firmware regs: %02x %02x", fw_reg1, fw_reg2);
+
+ dev->hw_use_gpio_0a = !!(fw_reg2 & ENE_FW2_GP0A);
+ dev->hw_learning_and_tx_capable = !!(fw_reg2 & ENE_FW2_LEARNING);
+ dev->hw_extra_buffer = !!(fw_reg1 & ENE_FW1_HAS_EXTRA_BUF);
+
+ if (dev->hw_learning_and_tx_capable)
+ dev->hw_fan_input = !!(fw_reg2 & ENE_FW2_FAN_INPUT);
+
+ ene_notice("Hardware features:");
+
+ if (dev->hw_learning_and_tx_capable) {
+ ene_notice("* Supports transmitting & learning mode");
+ ene_notice(" This feature is rare and therefore,");
+ ene_notice(" you are welcome to test it,");
+ ene_notice(" and/or contact the author via:");
+ ene_notice(" lirc-list@lists.sourceforge.net");
+ ene_notice(" or maximlevitsky@gmail.com");
+
+ ene_notice("* Uses GPIO %s for IR raw input",
+ dev->hw_use_gpio_0a ? "40" : "0A");
+
+ if (dev->hw_fan_input)
+ ene_notice("* Uses unused fan feedback input as source"
+ " of demodulated IR data");
+ }
+
+ if (!dev->hw_fan_input)
+ ene_notice("* Uses GPIO %s for IR demodulated input",
+ dev->hw_use_gpio_0a ? "0A" : "40");
+
+ if (dev->hw_extra_buffer)
+ ene_notice("* Uses new style input buffer");
+ return 0;
+}
+
+/* Read properities of hw sample buffer */
+static void ene_rx_setup_hw_buffer(struct ene_device *dev)
+{
+ u16 tmp;
+
+ ene_rx_read_hw_pointer(dev);
+ dev->r_pointer = dev->w_pointer;
+
+ if (!dev->hw_extra_buffer) {
+ dev->buffer_len = ENE_FW_PACKET_SIZE * 2;
+ return;
+ }
+
+ tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER);
+ tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER+1) << 8;
+ dev->extra_buf1_address = tmp;
+
+ dev->extra_buf1_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 2);
+
+ tmp = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 3);
+ tmp |= ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 4) << 8;
+ dev->extra_buf2_address = tmp;
+
+ dev->extra_buf2_len = ene_read_reg(dev, ENE_FW_SAMPLE_BUFFER + 5);
+
+ dev->buffer_len = dev->extra_buf1_len + dev->extra_buf2_len + 8;
+
+ ene_notice("Hardware uses 2 extended buffers:");
+ ene_notice(" 0x%04x - len : %d", dev->extra_buf1_address,
+ dev->extra_buf1_len);
+ ene_notice(" 0x%04x - len : %d", dev->extra_buf2_address,
+ dev->extra_buf2_len);
+
+ ene_notice("Total buffer len = %d", dev->buffer_len);
+
+ if (dev->buffer_len > 64 || dev->buffer_len < 16)
+ goto error;
+
+ if (dev->extra_buf1_address > 0xFBFC ||
+ dev->extra_buf1_address < 0xEC00)
+ goto error;
+
+ if (dev->extra_buf2_address > 0xFBFC ||
+ dev->extra_buf2_address < 0xEC00)
+ goto error;
+
+ if (dev->r_pointer > dev->buffer_len)
+ goto error;
+
+ ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
+ return;
+error:
+ ene_warn("Error validating extra buffers, device probably won't work");
+ dev->hw_extra_buffer = false;
+ ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
+}
+
+
+/* Restore the pointers to extra buffers - to make module reload work*/
+static void ene_rx_restore_hw_buffer(struct ene_device *dev)
+{
+ if (!dev->hw_extra_buffer)
+ return;
+
+ ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 0,
+ dev->extra_buf1_address & 0xFF);
+ ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 1,
+ dev->extra_buf1_address >> 8);
+ ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 2, dev->extra_buf1_len);
+
+ ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 3,
+ dev->extra_buf2_address & 0xFF);
+ ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 4,
+ dev->extra_buf2_address >> 8);
+ ene_write_reg(dev, ENE_FW_SAMPLE_BUFFER + 5,
+ dev->extra_buf2_len);
+ ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_EXTRA_BUF_HND);
+}
+
+/* Read hardware write pointer */
+static void ene_rx_read_hw_pointer(struct ene_device *dev)
+{
+ if (dev->hw_extra_buffer)
+ dev->w_pointer = ene_read_reg(dev, ENE_FW_RX_POINTER);
+ else
+ dev->w_pointer = ene_read_reg(dev, ENE_FW2)
+ & ENE_FW2_BUF_WPTR ? 0 : ENE_FW_PACKET_SIZE;
+
+ dbg_verbose("RB: HW write pointer: %02x, driver read pointer: %02x",
+ dev->w_pointer, dev->r_pointer);
+}
+
+/* Gets address of next sample from HW ring buffer */
+static int ene_rx_get_sample_reg(struct ene_device *dev)
+{
+ int r_pointer;
+
+ if (dev->r_pointer == dev->w_pointer) {
+ dbg_verbose("RB: hit end, try update w_pointer");
+ ene_rx_read_hw_pointer(dev);
+ }
+
+ if (dev->r_pointer == dev->w_pointer) {
+ dbg_verbose("RB: end of data at %d", dev->r_pointer);
+ return 0;
+ }
+
+ dbg_verbose("RB: reading at offset %d", dev->r_pointer);
+ r_pointer = dev->r_pointer;
+
+ dev->r_pointer++;
+ if (dev->r_pointer == dev->buffer_len)
+ dev->r_pointer = 0;
+
+ dbg_verbose("RB: next read will be from offset %d", dev->r_pointer);
+
+ if (r_pointer < 8) {
+ dbg_verbose("RB: read at main buffer at %d", r_pointer);
+ return ENE_FW_SAMPLE_BUFFER + r_pointer;
+ }
+
+ r_pointer -= 8;
+
+ if (r_pointer < dev->extra_buf1_len) {
+ dbg_verbose("RB: read at 1st extra buffer at %d", r_pointer);
+ return dev->extra_buf1_address + r_pointer;
+ }
+
+ r_pointer -= dev->extra_buf1_len;
+
+ if (r_pointer < dev->extra_buf2_len) {
+ dbg_verbose("RB: read at 2nd extra buffer at %d", r_pointer);
+ return dev->extra_buf2_address + r_pointer;
+ }
+
+ dbg("attempt to read beyong ring bufer end");
+ return 0;
+}
+
+/* Sense current received carrier */
+void ene_rx_sense_carrier(struct ene_device *dev)
+{
+ DEFINE_IR_RAW_EVENT(ev);
+
+ int carrier, duty_cycle;
+ int period = ene_read_reg(dev, ENE_CIRCAR_PRD);
+ int hperiod = ene_read_reg(dev, ENE_CIRCAR_HPRD);
+
+ if (!(period & ENE_CIRCAR_PRD_VALID))
+ return;
+
+ period &= ~ENE_CIRCAR_PRD_VALID;
+
+ if (!period)
+ return;
+
+ dbg("RX: hardware carrier period = %02x", period);
+ dbg("RX: hardware carrier pulse period = %02x", hperiod);
+
+ carrier = 2000000 / period;
+ duty_cycle = (hperiod * 100) / period;
+ dbg("RX: sensed carrier = %d Hz, duty cycle %d%%",
+ carrier, duty_cycle);
+ if (dev->carrier_detect_enabled) {
+ ev.carrier_report = true;
+ ev.carrier = carrier;
+ ev.duty_cycle = duty_cycle;
+ ir_raw_event_store(dev->idev, &ev);
+ }
+}
+
+/* this enables/disables the CIR RX engine */
+static void ene_rx_enable_cir_engine(struct ene_device *dev, bool enable)
+{
+ ene_set_clear_reg_mask(dev, ENE_CIRCFG,
+ ENE_CIRCFG_RX_EN | ENE_CIRCFG_RX_IRQ, enable);
+}
+
+/* this selects input for CIR engine. Ether GPIO 0A or GPIO40*/
+static void ene_rx_select_input(struct ene_device *dev, bool gpio_0a)
+{
+ ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_GPIO0A, gpio_0a);
+}
+
+/*
+ * this enables alternative input via fan tachometer sensor and bypasses
+ * the hw CIR engine
+ */
+static void ene_rx_enable_fan_input(struct ene_device *dev, bool enable)
+{
+ if (!dev->hw_fan_input)
+ return;
+
+ if (!enable)
+ ene_write_reg(dev, ENE_FAN_AS_IN1, 0);
+ else {
+ ene_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+ ene_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+ }
+}
+
+/* setup the receiver for RX*/
+static void ene_rx_setup(struct ene_device *dev)
+{
+ bool learning_mode = dev->learning_mode_enabled ||
+ dev->carrier_detect_enabled;
+ int sample_period_adjust = 0;
+
+ dbg("RX: setup receiver, learning mode = %d", learning_mode);
+
+
+ /* This selects RLC input and clears CFG2 settings */
+ ene_write_reg(dev, ENE_CIRCFG2, 0x00);
+
+ /* set sample period*/
+ if (sample_period == ENE_DEFAULT_SAMPLE_PERIOD)
+ sample_period_adjust =
+ dev->pll_freq == ENE_DEFAULT_PLL_FREQ ? 1 : 2;
+
+ ene_write_reg(dev, ENE_CIRRLC_CFG,
+ (sample_period + sample_period_adjust) |
+ ENE_CIRRLC_CFG_OVERFLOW);
+ /* revB doesn't support inputs */
+ if (dev->hw_revision < ENE_HW_C)
+ goto select_timeout;
+
+ if (learning_mode) {
+
+ WARN_ON(!dev->hw_learning_and_tx_capable);
+
+ /* Enable the opposite of the normal input
+ That means that if GPIO40 is normally used, use GPIO0A
+ and vice versa.
+ This input will carry non demodulated
+ signal, and we will tell the hw to demodulate it itself */
+ ene_rx_select_input(dev, !dev->hw_use_gpio_0a);
+ dev->rx_fan_input_inuse = false;
+
+ /* Enable carrier demodulation */
+ ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
+
+ /* Enable carrier detection */
+ ene_write_reg(dev, ENE_CIRCAR_PULS, 0x63);
+ ene_set_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT,
+ dev->carrier_detect_enabled || debug);
+ } else {
+ if (dev->hw_fan_input)
+ dev->rx_fan_input_inuse = true;
+ else
+ ene_rx_select_input(dev, dev->hw_use_gpio_0a);
+
+ /* Disable carrier detection & demodulation */
+ ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_CARR_DEMOD);
+ ene_clear_reg_mask(dev, ENE_CIRCFG2, ENE_CIRCFG2_CARR_DETECT);
+ }
+
+select_timeout:
+ if (dev->rx_fan_input_inuse) {
+ dev->props->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+
+ /* Fan input doesn't support timeouts, it just ends the
+ input with a maximum sample */
+ dev->props->min_timeout = dev->props->max_timeout =
+ MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
+ ENE_FW_SAMPLE_PERIOD_FAN);
+ } else {
+ dev->props->rx_resolution = MS_TO_NS(sample_period);
+
+ /* Theoreticly timeout is unlimited, but we cap it
+ * because it was seen that on one device, it
+ * would stop sending spaces after around 250 msec.
+ * Besides, this is close to 2^32 anyway and timeout is u32.
+ */
+ dev->props->min_timeout = MS_TO_NS(127 * sample_period);
+ dev->props->max_timeout = MS_TO_NS(200000);
+ }
+
+ if (dev->hw_learning_and_tx_capable)
+ dev->props->tx_resolution = MS_TO_NS(sample_period);
+
+ if (dev->props->timeout > dev->props->max_timeout)
+ dev->props->timeout = dev->props->max_timeout;
+ if (dev->props->timeout < dev->props->min_timeout)
+ dev->props->timeout = dev->props->min_timeout;
+}
+
+/* Enable the device for receive */
+static void ene_rx_enable(struct ene_device *dev)
+{
+ u8 reg_value;
+
+ /* Enable system interrupt */
+ if (dev->hw_revision < ENE_HW_C) {
+ ene_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+ ene_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+ } else {
+ reg_value = ene_read_reg(dev, ENE_IRQ) & 0xF0;
+ reg_value |= ENE_IRQ_UNK_EN;
+ reg_value &= ~ENE_IRQ_STATUS;
+ reg_value |= (dev->irq & ENE_IRQ_MASK);
+ ene_write_reg(dev, ENE_IRQ, reg_value);
+ }
+
+ /* Enable inputs */
+ ene_rx_enable_fan_input(dev, dev->rx_fan_input_inuse);
+ ene_rx_enable_cir_engine(dev, !dev->rx_fan_input_inuse);
+
+ /* ack any pending irqs - just in case */
+ ene_irq_status(dev);
+
+ /* enable firmware bits */
+ ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ /* enter idle mode */
+ ir_raw_event_set_idle(dev->idev, true);
+ dev->rx_enabled = true;
+}
+
+/* Disable the device receiver */
+static void ene_rx_disable(struct ene_device *dev)
+{
+ /* disable inputs */
+ ene_rx_enable_cir_engine(dev, false);
+ ene_rx_enable_fan_input(dev, false);
+
+ /* disable hardware IRQ and firmware flag */
+ ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ ir_raw_event_set_idle(dev->idev, true);
+ dev->rx_enabled = false;
+}
+
+/* This resets the receiver. Usefull to stop stream of spaces at end of
+ * transmission
+ */
+static void ene_rx_reset(struct ene_device *dev)
+{
+ ene_clear_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
+ ene_set_reg_mask(dev, ENE_CIRCFG, ENE_CIRCFG_RX_EN);
+}
+
+/* Set up the TX carrier frequency and duty cycle */
+static void ene_tx_set_carrier(struct ene_device *dev)
+{
+ u8 tx_puls_width;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_set_clear_reg_mask(dev, ENE_CIRCFG,
+ ENE_CIRCFG_TX_CARR, dev->tx_period > 0);
+
+ if (!dev->tx_period)
+ goto unlock;
+
+ BUG_ON(dev->tx_duty_cycle >= 100 || dev->tx_duty_cycle <= 0);
+
+ tx_puls_width = dev->tx_period / (100 / dev->tx_duty_cycle);
+
+ if (!tx_puls_width)
+ tx_puls_width = 1;
+
+ dbg("TX: pulse distance = %d * 500 ns", dev->tx_period);
+ dbg("TX: pulse width = %d * 500 ns", tx_puls_width);
+
+ ene_write_reg(dev, ENE_CIRMOD_PRD, dev->tx_period | ENE_CIRMOD_PRD_POL);
+ ene_write_reg(dev, ENE_CIRMOD_HPRD, tx_puls_width);
+unlock:
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* Enable/disable transmitters */
+static void ene_tx_set_transmitters(struct ene_device *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_set_clear_reg_mask(dev, ENE_GPIOFS8, ENE_GPIOFS8_GPIO41,
+ !!(dev->transmitter_mask & 0x01));
+ ene_set_clear_reg_mask(dev, ENE_GPIOFS1, ENE_GPIOFS1_GPIO0D,
+ !!(dev->transmitter_mask & 0x02));
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* prepare transmission */
+static void ene_tx_enable(struct ene_device *dev)
+{
+ u8 conf1 = ene_read_reg(dev, ENE_CIRCFG);
+ u8 fwreg2 = ene_read_reg(dev, ENE_FW2);
+
+ dev->saved_conf1 = conf1;
+
+ /* Show information about currently connected transmitter jacks */
+ if (fwreg2 & ENE_FW2_EMMITER1_CONN)
+ dbg("TX: Transmitter #1 is connected");
+
+ if (fwreg2 & ENE_FW2_EMMITER2_CONN)
+ dbg("TX: Transmitter #2 is connected");
+
+ if (!(fwreg2 & (ENE_FW2_EMMITER1_CONN | ENE_FW2_EMMITER2_CONN)))
+ ene_warn("TX: transmitter cable isn't connected!");
+
+ /* disable receive on revc */
+ if (dev->hw_revision == ENE_HW_C)
+ conf1 &= ~ENE_CIRCFG_RX_EN;
+
+ /* Enable TX engine */
+ conf1 |= ENE_CIRCFG_TX_EN | ENE_CIRCFG_TX_IRQ;
+ ene_write_reg(dev, ENE_CIRCFG, conf1);
+}
+
+/* end transmission */
+static void ene_tx_disable(struct ene_device *dev)
+{
+ ene_write_reg(dev, ENE_CIRCFG, dev->saved_conf1);
+ dev->tx_buffer = NULL;
+}
+
+
+/* TX one sample - must be called with dev->hw_lock*/
+static void ene_tx_sample(struct ene_device *dev)
+{
+ u8 raw_tx;
+ u32 sample;
+ bool pulse = dev->tx_sample_pulse;
+
+ if (!dev->tx_buffer) {
+ ene_warn("TX: BUG: attempt to transmit NULL buffer");
+ return;
+ }
+
+ /* Grab next TX sample */
+ if (!dev->tx_sample) {
+
+ if (dev->tx_pos == dev->tx_len) {
+ if (!dev->tx_done) {
+ dbg("TX: no more data to send");
+ dev->tx_done = true;
+ goto exit;
+ } else {
+ dbg("TX: last sample sent by hardware");
+ ene_tx_disable(dev);
+ complete(&dev->tx_complete);
+ return;
+ }
+ }
+
+ sample = dev->tx_buffer[dev->tx_pos++];
+ dev->tx_sample_pulse = !dev->tx_sample_pulse;
+
+ dev->tx_sample = DIV_ROUND_CLOSEST(sample, sample_period);
+
+ if (!dev->tx_sample)
+ dev->tx_sample = 1;
+ }
+
+ raw_tx = min(dev->tx_sample , (unsigned int)ENE_CIRRLC_OUT_MASK);
+ dev->tx_sample -= raw_tx;
+
+ dbg("TX: sample %8d (%s)", raw_tx * sample_period,
+ pulse ? "pulse" : "space");
+ if (pulse)
+ raw_tx |= ENE_CIRRLC_OUT_PULSE;
+
+ ene_write_reg(dev,
+ dev->tx_reg ? ENE_CIRRLC_OUT1 : ENE_CIRRLC_OUT0, raw_tx);
+
+ dev->tx_reg = !dev->tx_reg;
+exit:
+ /* simulate TX done interrupt */
+ if (txsim)
+ mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
+}
+
+/* timer to simulate tx done interrupt */
+static void ene_tx_irqsim(unsigned long data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_tx_sample(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+
+/* read irq status and ack it */
+static int ene_irq_status(struct ene_device *dev)
+{
+ u8 irq_status;
+ u8 fw_flags1, fw_flags2;
+ int retval = 0;
+
+ fw_flags2 = ene_read_reg(dev, ENE_FW2);
+
+ if (dev->hw_revision < ENE_HW_C) {
+ irq_status = ene_read_reg(dev, ENEB_IRQ_STATUS);
+
+ if (!(irq_status & ENEB_IRQ_STATUS_IR))
+ return 0;
+
+ ene_clear_reg_mask(dev, ENEB_IRQ_STATUS, ENEB_IRQ_STATUS_IR);
+ return ENE_IRQ_RX;
+ }
+
+ irq_status = ene_read_reg(dev, ENE_IRQ);
+ if (!(irq_status & ENE_IRQ_STATUS))
+ return 0;
+
+ /* original driver does that twice - a workaround ? */
+ ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
+ ene_write_reg(dev, ENE_IRQ, irq_status & ~ENE_IRQ_STATUS);
+
+ /* check RX interrupt */
+ if (fw_flags2 & ENE_FW2_RXIRQ) {
+ retval |= ENE_IRQ_RX;
+ ene_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_RXIRQ);
+ }
+
+ /* check TX interrupt */
+ fw_flags1 = ene_read_reg(dev, ENE_FW1);
+ if (fw_flags1 & ENE_FW1_TXIRQ) {
+ ene_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+ retval |= ENE_IRQ_TX;
+ }
+
+ return retval;
+}
+
+/* interrupt handler */
+static irqreturn_t ene_isr(int irq, void *data)
+{
+ u16 hw_value, reg;
+ int hw_sample, irq_status;
+ bool pulse;
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE;
+ struct ene_device *dev = (struct ene_device *)data;
+ DEFINE_IR_RAW_EVENT(ev);
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ dbg_verbose("ISR called");
+ ene_rx_read_hw_pointer(dev);
+ irq_status = ene_irq_status(dev);
+
+ if (!irq_status)
+ goto unlock;
+
+ retval = IRQ_HANDLED;
+
+ if (irq_status & ENE_IRQ_TX) {
+ dbg_verbose("TX interrupt");
+ if (!dev->hw_learning_and_tx_capable) {
+ dbg("TX interrupt on unsupported device!");
+ goto unlock;
+ }
+ ene_tx_sample(dev);
+ }
+
+ if (!(irq_status & ENE_IRQ_RX))
+ goto unlock;
+
+ dbg_verbose("RX interrupt");
+
+ if (dev->hw_learning_and_tx_capable)
+ ene_rx_sense_carrier(dev);
+
+ /* On hardware that don't support extra buffer we need to trust
+ the interrupt and not track the read pointer */
+ if (!dev->hw_extra_buffer)
+ dev->r_pointer = dev->w_pointer == 0 ? ENE_FW_PACKET_SIZE : 0;
+
+ while (1) {
+
+ reg = ene_rx_get_sample_reg(dev);
+
+ dbg_verbose("next sample to read at: %04x", reg);
+ if (!reg)
+ break;
+
+ hw_value = ene_read_reg(dev, reg);
+
+ if (dev->rx_fan_input_inuse) {
+
+ int offset = ENE_FW_SMPL_BUF_FAN - ENE_FW_SAMPLE_BUFFER;
+
+ /* read high part of the sample */
+ hw_value |= ene_read_reg(dev, reg + offset) << 8;
+ pulse = hw_value & ENE_FW_SMPL_BUF_FAN_PLS;
+
+ /* clear space bit, and other unused bits */
+ hw_value &= ENE_FW_SMPL_BUF_FAN_MSK;
+ hw_sample = hw_value * ENE_FW_SAMPLE_PERIOD_FAN;
+
+ } else {
+ pulse = !(hw_value & ENE_FW_SAMPLE_SPACE);
+ hw_value &= ~ENE_FW_SAMPLE_SPACE;
+ hw_sample = hw_value * sample_period;
+
+ if (dev->rx_period_adjust) {
+ hw_sample *= 100;
+ hw_sample /= (100 + dev->rx_period_adjust);
+ }
+ }
+
+ if (!dev->hw_extra_buffer && !hw_sample) {
+ dev->r_pointer = dev->w_pointer;
+ continue;
+ }
+
+ dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space");
+
+ ev.duration = MS_TO_NS(hw_sample);
+ ev.pulse = pulse;
+ ir_raw_event_store_with_filter(dev->idev, &ev);
+ }
+
+ ir_raw_event_handle(dev->idev);
+unlock:
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return retval;
+}
+
+/* Initialize default settings */
+static void ene_setup_default_settings(struct ene_device *dev)
+{
+ dev->tx_period = 32;
+ dev->tx_duty_cycle = 50; /*%*/
+ dev->transmitter_mask = 0x03;
+ dev->learning_mode_enabled = learning_mode_force;
+
+ /* Set reasonable default timeout */
+ dev->props->timeout = MS_TO_NS(150000);
+}
+
+/* Upload all hardware settings at once. Used at load and resume time */
+static void ene_setup_hw_settings(struct ene_device *dev)
+{
+ if (dev->hw_learning_and_tx_capable) {
+ ene_tx_set_carrier(dev);
+ ene_tx_set_transmitters(dev);
+ }
+
+ ene_rx_setup(dev);
+}
+
+/* outside interface: called on first open*/
+static int ene_open(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_rx_enable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+/* outside interface: called on device close*/
+static void ene_close(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_rx_disable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* outside interface: set transmitter mask */
+static int ene_set_tx_mask(void *data, u32 tx_mask)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ dbg("TX: attempt to set transmitter mask %02x", tx_mask);
+
+ /* invalid txmask */
+ if (!tx_mask || tx_mask & ~0x03) {
+ dbg("TX: invalid mask");
+ /* return count of transmitters */
+ return 2;
+ }
+
+ dev->transmitter_mask = tx_mask;
+ ene_tx_set_transmitters(dev);
+ return 0;
+}
+
+/* outside interface : set tx carrier */
+static int ene_set_tx_carrier(void *data, u32 carrier)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ u32 period = 2000000 / carrier;
+
+ dbg("TX: attempt to set tx carrier to %d kHz", carrier);
+
+ if (period && (period > ENE_CIRMOD_PRD_MAX ||
+ period < ENE_CIRMOD_PRD_MIN)) {
+
+ dbg("TX: out of range %d-%d kHz carrier",
+ 2000 / ENE_CIRMOD_PRD_MIN, 2000 / ENE_CIRMOD_PRD_MAX);
+ return -1;
+ }
+
+ dev->tx_period = period;
+ ene_tx_set_carrier(dev);
+ return 0;
+}
+
+/*outside interface : set tx duty cycle */
+static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ dbg("TX: setting duty cycle to %d%%", duty_cycle);
+ dev->tx_duty_cycle = duty_cycle;
+ ene_tx_set_carrier(dev);
+ return 0;
+}
+
+/* outside interface: enable learning mode */
+static int ene_set_learning_mode(void *data, int enable)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ if (enable == dev->learning_mode_enabled)
+ return 0;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->learning_mode_enabled = enable;
+ ene_rx_disable(dev);
+ ene_rx_setup(dev);
+ ene_rx_enable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+static int ene_set_carrier_report(void *data, int enable)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ if (enable == dev->carrier_detect_enabled)
+ return 0;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->carrier_detect_enabled = enable;
+ ene_rx_disable(dev);
+ ene_rx_setup(dev);
+ ene_rx_enable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+/* outside interface: enable or disable idle mode */
+static void ene_set_idle(void *data, bool idle)
+{
+ if (idle) {
+ ene_rx_reset((struct ene_device *)data);
+ dbg("RX: end of data");
+ }
+}
+
+/* outside interface: transmit */
+static int ene_transmit(void *data, int *buf, u32 n)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ dev->tx_buffer = buf;
+ dev->tx_len = n / sizeof(int);
+ dev->tx_pos = 0;
+ dev->tx_reg = 0;
+ dev->tx_done = 0;
+ dev->tx_sample = 0;
+ dev->tx_sample_pulse = 0;
+
+ dbg("TX: %d samples", dev->tx_len);
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_tx_enable(dev);
+
+ /* Transmit first two samples */
+ ene_tx_sample(dev);
+ ene_tx_sample(dev);
+
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+ if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
+ dbg("TX: timeout");
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_tx_disable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ } else
+ dbg("TX: done");
+ return n;
+}
+
+/* probe entry */
+static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
+{
+ int error = -ENOMEM;
+ struct ir_dev_props *ir_props;
+ struct input_dev *input_dev;
+ struct ene_device *dev;
+
+ /* allocate memory */
+ input_dev = input_allocate_device();
+ ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+ dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+ if (!input_dev || !ir_props || !dev)
+ goto error1;
+
+ /* validate resources */
+ error = -ENODEV;
+
+ if (!pnp_port_valid(pnp_dev, 0) ||
+ pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE)
+ goto error;
+
+ if (!pnp_irq_valid(pnp_dev, 0))
+ goto error;
+
+ spin_lock_init(&dev->hw_lock);
+
+ /* claim the resources */
+ error = -EBUSY;
+ dev->hw_io = pnp_port_start(pnp_dev, 0);
+ if (!request_region(dev->hw_io, ENE_IO_SIZE, ENE_DRIVER_NAME)) {
+ dev->hw_io = -1;
+ dev->irq = -1;
+ goto error;
+ }
+
+ dev->irq = pnp_irq(pnp_dev, 0);
+ if (request_irq(dev->irq, ene_isr,
+ IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev)) {
+ dev->irq = -1;
+ goto error;
+ }
+
+ pnp_set_drvdata(pnp_dev, dev);
+ dev->pnp_dev = pnp_dev;
+
+ /* don't allow too short/long sample periods */
+ if (sample_period < 5 || sample_period > 0x7F)
+ sample_period = ENE_DEFAULT_SAMPLE_PERIOD;
+
+ /* detect hardware version and features */
+ error = ene_hw_detect(dev);
+ if (error)
+ goto error;
+
+ if (!dev->hw_learning_and_tx_capable && txsim) {
+ dev->hw_learning_and_tx_capable = true;
+ setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
+ (long unsigned int)dev);
+ ene_warn("Simulation of TX activated");
+ }
+
+ if (!dev->hw_learning_and_tx_capable)
+ learning_mode_force = false;
+
+ ir_props->driver_type = RC_DRIVER_IR_RAW;
+ ir_props->allowed_protos = IR_TYPE_ALL;
+ ir_props->priv = dev;
+ ir_props->open = ene_open;
+ ir_props->close = ene_close;
+ ir_props->s_idle = ene_set_idle;
+
+ dev->props = ir_props;
+ dev->idev = input_dev;
+
+ if (dev->hw_learning_and_tx_capable) {
+ ir_props->s_learning_mode = ene_set_learning_mode;
+ init_completion(&dev->tx_complete);
+ ir_props->tx_ir = ene_transmit;
+ ir_props->s_tx_mask = ene_set_tx_mask;
+ ir_props->s_tx_carrier = ene_set_tx_carrier;
+ ir_props->s_tx_duty_cycle = ene_set_tx_duty_cycle;
+ ir_props->s_carrier_report = ene_set_carrier_report;
+ }
+
+ ene_rx_setup_hw_buffer(dev);
+ ene_setup_default_settings(dev);
+ ene_setup_hw_settings(dev);
+
+ device_set_wakeup_capable(&pnp_dev->dev, true);
+ device_set_wakeup_enable(&pnp_dev->dev, true);
+
+ if (dev->hw_learning_and_tx_capable)
+ input_dev->name = "ENE eHome Infrared Remote Transceiver";
+ else
+ input_dev->name = "ENE eHome Infrared Remote Receiver";
+
+ error = -ENODEV;
+ if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
+ ENE_DRIVER_NAME))
+ goto error;
+
+ ene_notice("driver has been succesfully loaded");
+ return 0;
+error:
+ if (dev && dev->irq >= 0)
+ free_irq(dev->irq, dev);
+ if (dev && dev->hw_io >= 0)
+ release_region(dev->hw_io, ENE_IO_SIZE);
+error1:
+ input_free_device(input_dev);
+ kfree(ir_props);
+ kfree(dev);
+ return error;
+}
+
+/* main unload function */
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_rx_disable(dev);
+ ene_rx_restore_hw_buffer(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+ free_irq(dev->irq, dev);
+ release_region(dev->hw_io, ENE_IO_SIZE);
+ ir_input_unregister(dev->idev);
+ kfree(dev->props);
+ kfree(dev);
+}
+
+/* enable wake on IR (wakes on specific button on original remote) */
+static void ene_enable_wake(struct ene_device *dev, int enable)
+{
+ enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
+ dbg("wake on IR %s", enable ? "enabled" : "disabled");
+ ene_set_clear_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, enable);
+}
+
+#ifdef CONFIG_PM
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_enable_wake(dev, true);
+
+ /* TODO: add support for wake pattern */
+ return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_setup_hw_settings(dev);
+
+ if (dev->rx_enabled)
+ ene_rx_enable(dev);
+
+ ene_enable_wake(dev, false);
+ return 0;
+}
+#endif
+
+static void ene_shutdown(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_enable_wake(dev, true);
+}
+
+static const struct pnp_device_id ene_ids[] = {
+ {.id = "ENE0100",},
+ {.id = "ENE0200",},
+ {.id = "ENE0201",},
+ {.id = "ENE0202",},
+ {},
+};
+
+static struct pnp_driver ene_driver = {
+ .name = ENE_DRIVER_NAME,
+ .id_table = ene_ids,
+ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+ .probe = ene_probe,
+ .remove = __devexit_p(ene_remove),
+#ifdef CONFIG_PM
+ .suspend = ene_suspend,
+ .resume = ene_resume,
+#endif
+ .shutdown = ene_shutdown,
+};
+
+static int __init ene_init(void)
+{
+ return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+ pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
+
+module_param(learning_mode_force, bool, S_IRUGO);
+MODULE_PARM_DESC(learning_mode_force, "Enable learning mode by default");
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level");
+
+module_param(txsim, bool, S_IRUGO);
+MODULE_PARM_DESC(txsim,
+ "Simulate TX features on unsupported hardware (dangerous)");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+ ("Infrared input driver for KB3926B/C/D/E/F "
+ "(aka ENE0100/ENE0200/ENE0201/ENE0202) CIR port");
+
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
--- /dev/null
+/*
+ * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+
+
+/* hardware address */
+#define ENE_STATUS 0 /* hardware status - unused */
+#define ENE_ADDR_HI 1 /* hi byte of register address */
+#define ENE_ADDR_LO 2 /* low byte of register address */
+#define ENE_IO 3 /* read/write window */
+#define ENE_IO_SIZE 4
+
+/* 8 bytes of samples, divided in 2 packets*/
+#define ENE_FW_SAMPLE_BUFFER 0xF8F0 /* sample buffer */
+#define ENE_FW_SAMPLE_SPACE 0x80 /* sample is space */
+#define ENE_FW_PACKET_SIZE 4
+
+/* first firmware flag register */
+#define ENE_FW1 0xF8F8 /* flagr */
+#define ENE_FW1_ENABLE 0x01 /* enable fw processing */
+#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
+#define ENE_FW1_HAS_EXTRA_BUF 0x04 /* fw uses extra buffer*/
+#define ENE_FW1_EXTRA_BUF_HND 0x08 /* extra buffer handshake bit*/
+#define ENE_FW1_LED_ON 0x10 /* turn on a led */
+
+#define ENE_FW1_WPATTERN 0x20 /* enable wake pattern */
+#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */
+#define ENE_FW1_IRQ 0x80 /* enable interrupt */
+
+/* second firmware flag register */
+#define ENE_FW2 0xF8F9 /* flagw */
+#define ENE_FW2_BUF_WPTR 0x01 /* which half of the buffer to read */
+#define ENE_FW2_RXIRQ 0x04 /* RX IRQ pending*/
+#define ENE_FW2_GP0A 0x08 /* Use GPIO0A for demodulated input */
+#define ENE_FW2_EMMITER1_CONN 0x10 /* TX emmiter 1 connected */
+#define ENE_FW2_EMMITER2_CONN 0x20 /* TX emmiter 2 connected */
+
+#define ENE_FW2_FAN_INPUT 0x40 /* fan input used for demodulated data*/
+#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */
+
+/* firmware RX pointer for new style buffer */
+#define ENE_FW_RX_POINTER 0xF8FA
+
+/* high parts of samples for fan input (8 samples)*/
+#define ENE_FW_SMPL_BUF_FAN 0xF8FB
+#define ENE_FW_SMPL_BUF_FAN_PLS 0x8000 /* combined sample is pulse */
+#define ENE_FW_SMPL_BUF_FAN_MSK 0x0FFF /* combined sample maximum value */
+#define ENE_FW_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
+
+/* transmitter ports */
+#define ENE_GPIOFS1 0xFC01
+#define ENE_GPIOFS1_GPIO0D 0x20 /* enable tx output on GPIO0D */
+#define ENE_GPIOFS8 0xFC08
+#define ENE_GPIOFS8_GPIO41 0x02 /* enable tx output on GPIO40 */
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ 0xFD09 /* IRQ number */
+#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
+#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */
+
+/* fan as input settings */
+#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN 0xCD
+#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN 0x03
+
+/* IRQ registers block (for revision C,D) */
+#define ENE_IRQ 0xFE9B /* new irq settings register */
+#define ENE_IRQ_MASK 0x0F /* irq number mask */
+#define ENE_IRQ_UNK_EN 0x10 /* always enabled */
+#define ENE_IRQ_STATUS 0x20 /* irq status and ACK */
+
+/* CIR Config register #1 */
+#define ENE_CIRCFG 0xFEC0
+#define ENE_CIRCFG_RX_EN 0x01 /* RX enable */
+#define ENE_CIRCFG_RX_IRQ 0x02 /* Enable hardware interrupt */
+#define ENE_CIRCFG_REV_POL 0x04 /* Input polarity reversed */
+#define ENE_CIRCFG_CARR_DEMOD 0x08 /* Enable carrier demodulator */
+
+#define ENE_CIRCFG_TX_EN 0x10 /* TX enable */
+#define ENE_CIRCFG_TX_IRQ 0x20 /* Send interrupt on TX done */
+#define ENE_CIRCFG_TX_POL_REV 0x40 /* TX polarity reversed */
+#define ENE_CIRCFG_TX_CARR 0x80 /* send TX carrier or not */
+
+/* CIR config register #2 */
+#define ENE_CIRCFG2 0xFEC1
+#define ENE_CIRCFG2_RLC 0x00
+#define ENE_CIRCFG2_RC5 0x01
+#define ENE_CIRCFG2_RC6 0x02
+#define ENE_CIRCFG2_NEC 0x03
+#define ENE_CIRCFG2_CARR_DETECT 0x10 /* Enable carrier detection */
+#define ENE_CIRCFG2_GPIO0A 0x20 /* Use GPIO0A instead of GPIO40 for input */
+#define ENE_CIRCFG2_FAST_SAMPL1 0x40 /* Fast leading pulse detection for RC6 */
+#define ENE_CIRCFG2_FAST_SAMPL2 0x80 /* Fast data detection for RC6 */
+
+/* Knobs for protocol decoding - will document when/if will use them */
+#define ENE_CIRPF 0xFEC2
+#define ENE_CIRHIGH 0xFEC3
+#define ENE_CIRBIT 0xFEC4
+#define ENE_CIRSTART 0xFEC5
+#define ENE_CIRSTART2 0xFEC6
+
+/* Actual register which contains RLC RX data - read by firmware */
+#define ENE_CIRDAT_IN 0xFEC7
+
+
+/* RLC configuration - sample period (1us resulution) + idle mode */
+#define ENE_CIRRLC_CFG 0xFEC8
+#define ENE_CIRRLC_CFG_OVERFLOW 0x80 /* interrupt on overflows if set */
+#define ENE_DEFAULT_SAMPLE_PERIOD 50
+
+/* Two byte RLC TX buffer */
+#define ENE_CIRRLC_OUT0 0xFEC9
+#define ENE_CIRRLC_OUT1 0xFECA
+#define ENE_CIRRLC_OUT_PULSE 0x80 /* Transmitted sample is pulse */
+#define ENE_CIRRLC_OUT_MASK 0x7F
+
+
+/* Carrier detect setting
+ * Low nibble - number of carrier pulses to average
+ * High nibble - number of initial carrier pulses to discard
+ */
+#define ENE_CIRCAR_PULS 0xFECB
+
+/* detected RX carrier period (resolution: 500 ns) */
+#define ENE_CIRCAR_PRD 0xFECC
+#define ENE_CIRCAR_PRD_VALID 0x80 /* data valid content valid */
+
+/* detected RX carrier pulse width (resolution: 500 ns) */
+#define ENE_CIRCAR_HPRD 0xFECD
+
+/* TX period (resolution: 500 ns, minimum 2)*/
+#define ENE_CIRMOD_PRD 0xFECE
+#define ENE_CIRMOD_PRD_POL 0x80 /* TX carrier polarity*/
+
+#define ENE_CIRMOD_PRD_MAX 0x7F /* 15.87 kHz */
+#define ENE_CIRMOD_PRD_MIN 0x02 /* 1 Mhz */
+
+/* TX pulse width (resolution: 500 ns)*/
+#define ENE_CIRMOD_HPRD 0xFECF
+
+/* Hardware versions */
+#define ENE_ECHV 0xFF00 /* hardware revision */
+#define ENE_PLLFRH 0xFF16
+#define ENE_PLLFRL 0xFF17
+#define ENE_DEFAULT_PLL_FREQ 1000
+
+#define ENE_ECSTS 0xFF1D
+#define ENE_ECSTS_RSRVD 0x04
+
+#define ENE_ECVER_MAJOR 0xFF1E /* chip version */
+#define ENE_ECVER_MINOR 0xFF1F
+#define ENE_HW_VER_OLD 0xFD00
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME "ene_ir"
+
+#define ENE_IRQ_RX 1
+#define ENE_IRQ_TX 2
+
+#define ENE_HW_B 1 /* 3926B */
+#define ENE_HW_C 2 /* 3926C */
+#define ENE_HW_D 3 /* 3926D or later */
+
+#define ene_printk(level, text, ...) \
+ printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__)
+
+#define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__)
+#define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__)
+
+
+#define __dbg(level, format, ...) \
+ do { \
+ if (debug >= level) \
+ printk(KERN_DEBUG ENE_DRIVER_NAME \
+ ": " format "\n", ## __VA_ARGS__); \
+ } while (0)
+
+
+#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__)
+#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__)
+#define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__)
+
+#define MS_TO_NS(msec) ((msec) * 1000)
+
+struct ene_device {
+ struct pnp_dev *pnp_dev;
+ struct input_dev *idev;
+ struct ir_dev_props *props;
+
+ /* hw IO settings */
+ long hw_io;
+ int irq;
+ spinlock_t hw_lock;
+
+ /* HW features */
+ int hw_revision; /* hardware revision */
+ bool hw_use_gpio_0a; /* gpio0a is demodulated input*/
+ bool hw_extra_buffer; /* hardware has 'extra buffer' */
+ bool hw_fan_input; /* fan input is IR data source */
+ bool hw_learning_and_tx_capable; /* learning & tx capable */
+ int pll_freq;
+ int buffer_len;
+
+ /* Extra RX buffer location */
+ int extra_buf1_address;
+ int extra_buf1_len;
+ int extra_buf2_address;
+ int extra_buf2_len;
+
+ /* HW state*/
+ int r_pointer; /* pointer to next sample to read */
+ int w_pointer; /* pointer to next sample hw will write */
+ bool rx_fan_input_inuse; /* is fan input in use for rx*/
+ int tx_reg; /* current reg used for TX */
+ u8 saved_conf1; /* saved FEC0 reg */
+ unsigned int tx_sample; /* current sample for TX */
+ bool tx_sample_pulse; /* current sample is pulse */
+
+ /* TX buffer */
+ int *tx_buffer; /* input samples buffer*/
+ int tx_pos; /* position in that bufer */
+ int tx_len; /* current len of tx buffer */
+ int tx_done; /* done transmitting */
+ /* one more sample pending*/
+ struct completion tx_complete; /* TX completion */
+ struct timer_list tx_sim_timer;
+
+ /* TX settings */
+ int tx_period;
+ int tx_duty_cycle;
+ int transmitter_mask;
+
+ /* RX settings */
+ bool learning_mode_enabled; /* learning input enabled */
+ bool carrier_detect_enabled; /* carrier detect enabled */
+ int rx_period_adjust;
+ bool rx_enabled;
+};
+
+static int ene_irq_status(struct ene_device *dev);
+static void ene_rx_read_hw_pointer(struct ene_device *dev);
--- /dev/null
+/*
+ * imon.c: input and display driver for SoundGraph iMON IR/VFD/LCD
+ *
+ * Copyright(C) 2010 Jarod Wilson <jarod@wilsonet.com>
+ * Portions based on the original lirc_imon driver,
+ * Copyright(C) 2004 Venky Raju(dev@venky.ws)
+ *
+ * Huge thanks to R. Geoff Newbury for invaluable debugging on the
+ * 0xffdc iMON devices, and for sending me one to hack on, without
+ * which the support for them wouldn't be nearly as good. Thanks
+ * also to the numerous 0xffdc device owners that tested auto-config
+ * support for me and provided debug dumps from their devices.
+ *
+ * imon is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/ir-core.h>
+
+#include <linux/time.h>
+#include <linux/timer.h>
+
+#define MOD_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
+#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
+#define MOD_NAME "imon"
+#define MOD_VERSION "0.9.2"
+
+#define DISPLAY_MINOR_BASE 144
+#define DEVICE_NAME "lcd%d"
+
+#define BUF_CHUNK_SIZE 8
+#define BUF_SIZE 128
+
+#define BIT_DURATION 250 /* each bit received is 250us */
+
+#define IMON_CLOCK_ENABLE_PACKETS 2
+
+/*** P R O T O T Y P E S ***/
+
+/* USB Callback prototypes */
+static int imon_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+static void imon_disconnect(struct usb_interface *interface);
+static void usb_rx_callback_intf0(struct urb *urb);
+static void usb_rx_callback_intf1(struct urb *urb);
+static void usb_tx_callback(struct urb *urb);
+
+/* suspend/resume support */
+static int imon_resume(struct usb_interface *intf);
+static int imon_suspend(struct usb_interface *intf, pm_message_t message);
+
+/* Display file_operations function prototypes */
+static int display_open(struct inode *inode, struct file *file);
+static int display_close(struct inode *inode, struct file *file);
+
+/* VFD write operation */
+static ssize_t vfd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos);
+
+/* LCD file_operations override function prototypes */
+static ssize_t lcd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos);
+
+/*** G L O B A L S ***/
+
+struct imon_context {
+ struct device *dev;
+ struct ir_dev_props *props;
+ /* Newer devices have two interfaces */
+ struct usb_device *usbdev_intf0;
+ struct usb_device *usbdev_intf1;
+
+ bool display_supported; /* not all controllers do */
+ bool display_isopen; /* display port has been opened */
+ bool rf_device; /* true if iMON 2.4G LT/DT RF device */
+ bool rf_isassociating; /* RF remote associating */
+ bool dev_present_intf0; /* USB device presence, interface 0 */
+ bool dev_present_intf1; /* USB device presence, interface 1 */
+
+ struct mutex lock; /* to lock this object */
+ wait_queue_head_t remove_ok; /* For unexpected USB disconnects */
+
+ struct usb_endpoint_descriptor *rx_endpoint_intf0;
+ struct usb_endpoint_descriptor *rx_endpoint_intf1;
+ struct usb_endpoint_descriptor *tx_endpoint;
+ struct urb *rx_urb_intf0;
+ struct urb *rx_urb_intf1;
+ struct urb *tx_urb;
+ bool tx_control;
+ unsigned char usb_rx_buf[8];
+ unsigned char usb_tx_buf[8];
+
+ struct tx_t {
+ unsigned char data_buf[35]; /* user data buffer */
+ struct completion finished; /* wait for write to finish */
+ bool busy; /* write in progress */
+ int status; /* status of tx completion */
+ } tx;
+
+ u16 vendor; /* usb vendor ID */
+ u16 product; /* usb product ID */
+
+ struct input_dev *rdev; /* input device for remote */
+ struct input_dev *idev; /* input device for panel & IR mouse */
+ struct input_dev *touch; /* input device for touchscreen */
+
+ spinlock_t kc_lock; /* make sure we get keycodes right */
+ u32 kc; /* current input keycode */
+ u32 last_keycode; /* last reported input keycode */
+ u32 rc_scancode; /* the computed remote scancode */
+ u8 rc_toggle; /* the computed remote toggle bit */
+ u64 ir_type; /* iMON or MCE (RC6) IR protocol? */
+ bool release_code; /* some keys send a release code */
+
+ u8 display_type; /* store the display type */
+ bool pad_mouse; /* toggle kbd(0)/mouse(1) mode */
+
+ char name_rdev[128]; /* rc input device name */
+ char phys_rdev[64]; /* rc input device phys path */
+
+ char name_idev[128]; /* input device name */
+ char phys_idev[64]; /* input device phys path */
+
+ char name_touch[128]; /* touch screen name */
+ char phys_touch[64]; /* touch screen phys path */
+ struct timer_list ttimer; /* touch screen timer */
+ int touch_x; /* x coordinate on touchscreen */
+ int touch_y; /* y coordinate on touchscreen */
+};
+
+#define TOUCH_TIMEOUT (HZ/30)
+
+/* vfd character device file operations */
+static const struct file_operations vfd_fops = {
+ .owner = THIS_MODULE,
+ .open = &display_open,
+ .write = &vfd_write,
+ .release = &display_close,
+ .llseek = noop_llseek,
+};
+
+/* lcd character device file operations */
+static const struct file_operations lcd_fops = {
+ .owner = THIS_MODULE,
+ .open = &display_open,
+ .write = &lcd_write,
+ .release = &display_close,
+ .llseek = noop_llseek,
+};
+
+enum {
+ IMON_DISPLAY_TYPE_AUTO = 0,
+ IMON_DISPLAY_TYPE_VFD = 1,
+ IMON_DISPLAY_TYPE_LCD = 2,
+ IMON_DISPLAY_TYPE_VGA = 3,
+ IMON_DISPLAY_TYPE_NONE = 4,
+};
+
+enum {
+ IMON_KEY_IMON = 0,
+ IMON_KEY_MCE = 1,
+ IMON_KEY_PANEL = 2,
+};
+
+/*
+ * USB Device ID for iMON USB Control Boards
+ *
+ * The Windows drivers contain 6 different inf files, more or less one for
+ * each new device until the 0x0034-0x0046 devices, which all use the same
+ * driver. Some of the devices in the 34-46 range haven't been definitively
+ * identified yet. Early devices have either a TriGem Computer, Inc. or a
+ * Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
+ * devices use the SoundGraph vendor ID (0x15c2). This driver only supports
+ * the ffdc and later devices, which do onboard decoding.
+ */
+static struct usb_device_id imon_usb_id_table[] = {
+ /*
+ * Several devices with this same device ID, all use iMON_PAD.inf
+ * SoundGraph iMON PAD (IR & VFD)
+ * SoundGraph iMON PAD (IR & LCD)
+ * SoundGraph iMON Knob (IR only)
+ */
+ { USB_DEVICE(0x15c2, 0xffdc) },
+
+ /*
+ * Newer devices, all driven by the latest iMON Windows driver, full
+ * list of device IDs extracted via 'strings Setup/data1.hdr |grep 15c2'
+ * Need user input to fill in details on unknown devices.
+ */
+ /* SoundGraph iMON OEM Touch LCD (IR & 7" VGA LCD) */
+ { USB_DEVICE(0x15c2, 0x0034) },
+ /* SoundGraph iMON OEM Touch LCD (IR & 4.3" VGA LCD) */
+ { USB_DEVICE(0x15c2, 0x0035) },
+ /* SoundGraph iMON OEM VFD (IR & VFD) */
+ { USB_DEVICE(0x15c2, 0x0036) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x0037) },
+ /* SoundGraph iMON OEM LCD (IR & LCD) */
+ { USB_DEVICE(0x15c2, 0x0038) },
+ /* SoundGraph iMON UltraBay (IR & LCD) */
+ { USB_DEVICE(0x15c2, 0x0039) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003a) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003b) },
+ /* SoundGraph iMON OEM Inside (IR only) */
+ { USB_DEVICE(0x15c2, 0x003c) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003d) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003e) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x003f) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x0040) },
+ /* SoundGraph iMON MINI (IR only) */
+ { USB_DEVICE(0x15c2, 0x0041) },
+ /* Antec Veris Multimedia Station EZ External (IR only) */
+ { USB_DEVICE(0x15c2, 0x0042) },
+ /* Antec Veris Multimedia Station Basic Internal (IR only) */
+ { USB_DEVICE(0x15c2, 0x0043) },
+ /* Antec Veris Multimedia Station Elite (IR & VFD) */
+ { USB_DEVICE(0x15c2, 0x0044) },
+ /* Antec Veris Multimedia Station Premiere (IR & LCD) */
+ { USB_DEVICE(0x15c2, 0x0045) },
+ /* device specifics unknown */
+ { USB_DEVICE(0x15c2, 0x0046) },
+ {}
+};
+
+/* USB Device data */
+static struct usb_driver imon_driver = {
+ .name = MOD_NAME,
+ .probe = imon_probe,
+ .disconnect = imon_disconnect,
+ .suspend = imon_suspend,
+ .resume = imon_resume,
+ .id_table = imon_usb_id_table,
+};
+
+static struct usb_class_driver imon_vfd_class = {
+ .name = DEVICE_NAME,
+ .fops = &vfd_fops,
+ .minor_base = DISPLAY_MINOR_BASE,
+};
+
+static struct usb_class_driver imon_lcd_class = {
+ .name = DEVICE_NAME,
+ .fops = &lcd_fops,
+ .minor_base = DISPLAY_MINOR_BASE,
+};
+
+/* imon receiver front panel/knob key table */
+static const struct {
+ u64 hw_code;
+ u32 keycode;
+} imon_panel_key_table[] = {
+ { 0x000000000f00ffeell, KEY_PROG1 }, /* Go */
+ { 0x000000001f00ffeell, KEY_AUDIO },
+ { 0x000000002000ffeell, KEY_VIDEO },
+ { 0x000000002100ffeell, KEY_CAMERA },
+ { 0x000000002700ffeell, KEY_DVD },
+ { 0x000000002300ffeell, KEY_TV },
+ { 0x000000000500ffeell, KEY_PREVIOUS },
+ { 0x000000000700ffeell, KEY_REWIND },
+ { 0x000000000400ffeell, KEY_STOP },
+ { 0x000000003c00ffeell, KEY_PLAYPAUSE },
+ { 0x000000000800ffeell, KEY_FASTFORWARD },
+ { 0x000000000600ffeell, KEY_NEXT },
+ { 0x000000010000ffeell, KEY_RIGHT },
+ { 0x000001000000ffeell, KEY_LEFT },
+ { 0x000000003d00ffeell, KEY_SELECT },
+ { 0x000100000000ffeell, KEY_VOLUMEUP },
+ { 0x010000000000ffeell, KEY_VOLUMEDOWN },
+ { 0x000000000100ffeell, KEY_MUTE },
+ /* 0xffdc iMON MCE VFD */
+ { 0x00010000ffffffeell, KEY_VOLUMEUP },
+ { 0x01000000ffffffeell, KEY_VOLUMEDOWN },
+ /* iMON Knob values */
+ { 0x000100ffffffffeell, KEY_VOLUMEUP },
+ { 0x010000ffffffffeell, KEY_VOLUMEDOWN },
+ { 0x000008ffffffffeell, KEY_MUTE },
+};
+
+/* to prevent races between open() and disconnect(), probing, etc */
+static DEFINE_MUTEX(driver_lock);
+
+/* Module bookkeeping bits */
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESC);
+MODULE_VERSION(MOD_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
+
+static bool debug;
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes (default: no)");
+
+/* lcd, vfd, vga or none? should be auto-detected, but can be overridden... */
+static int display_type;
+module_param(display_type, int, S_IRUGO);
+MODULE_PARM_DESC(display_type, "Type of attached display. 0=autodetect, "
+ "1=vfd, 2=lcd, 3=vga, 4=none (default: autodetect)");
+
+static int pad_stabilize = 1;
+module_param(pad_stabilize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pad_stabilize, "Apply stabilization algorithm to iMON PAD "
+ "presses in arrow key mode. 0=disable, 1=enable (default).");
+
+/*
+ * In certain use cases, mouse mode isn't really helpful, and could actually
+ * cause confusion, so allow disabling it when the IR device is open.
+ */
+static bool nomouse;
+module_param(nomouse, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(nomouse, "Disable mouse input device mode when IR device is "
+ "open. 0=don't disable, 1=disable. (default: don't disable)");
+
+/* threshold at which a pad push registers as an arrow key in kbd mode */
+static int pad_thresh;
+module_param(pad_thresh, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pad_thresh, "Threshold at which a pad push registers as an "
+ "arrow key in kbd mode (default: 28)");
+
+
+static void free_imon_context(struct imon_context *ictx)
+{
+ struct device *dev = ictx->dev;
+
+ usb_free_urb(ictx->tx_urb);
+ usb_free_urb(ictx->rx_urb_intf0);
+ usb_free_urb(ictx->rx_urb_intf1);
+ kfree(ictx);
+
+ dev_dbg(dev, "%s: iMON context freed\n", __func__);
+}
+
+/**
+ * Called when the Display device (e.g. /dev/lcd0)
+ * is opened by the application.
+ */
+static int display_open(struct inode *inode, struct file *file)
+{
+ struct usb_interface *interface;
+ struct imon_context *ictx = NULL;
+ int subminor;
+ int retval = 0;
+
+ /* prevent races with disconnect */
+ mutex_lock(&driver_lock);
+
+ subminor = iminor(inode);
+ interface = usb_find_interface(&imon_driver, subminor);
+ if (!interface) {
+ pr_err("could not find interface for minor %d\n", subminor);
+ retval = -ENODEV;
+ goto exit;
+ }
+ ictx = usb_get_intfdata(interface);
+
+ if (!ictx) {
+ pr_err("no context found for minor %d\n", subminor);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ pr_err("display not supported by device\n");
+ retval = -ENODEV;
+ } else if (ictx->display_isopen) {
+ pr_err("display port is already open\n");
+ retval = -EBUSY;
+ } else {
+ ictx->display_isopen = true;
+ file->private_data = ictx;
+ dev_dbg(ictx->dev, "display port opened\n");
+ }
+
+ mutex_unlock(&ictx->lock);
+
+exit:
+ mutex_unlock(&driver_lock);
+ return retval;
+}
+
+/**
+ * Called when the display device (e.g. /dev/lcd0)
+ * is closed by the application.
+ */
+static int display_close(struct inode *inode, struct file *file)
+{
+ struct imon_context *ictx = NULL;
+ int retval = 0;
+
+ ictx = file->private_data;
+
+ if (!ictx) {
+ pr_err("no context for device\n");
+ return -ENODEV;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ pr_err("display not supported by device\n");
+ retval = -ENODEV;
+ } else if (!ictx->display_isopen) {
+ pr_err("display is not open\n");
+ retval = -EIO;
+ } else {
+ ictx->display_isopen = false;
+ dev_dbg(ictx->dev, "display port closed\n");
+ if (!ictx->dev_present_intf0) {
+ /*
+ * Device disconnected before close and IR port is not
+ * open. If IR port is open, context will be deleted by
+ * ir_close.
+ */
+ mutex_unlock(&ictx->lock);
+ free_imon_context(ictx);
+ return retval;
+ }
+ }
+
+ mutex_unlock(&ictx->lock);
+ return retval;
+}
+
+/**
+ * Sends a packet to the device -- this function must be called
+ * with ictx->lock held.
+ */
+static int send_packet(struct imon_context *ictx)
+{
+ unsigned int pipe;
+ unsigned long timeout;
+ int interval = 0;
+ int retval = 0;
+ struct usb_ctrlrequest *control_req = NULL;
+
+ /* Check if we need to use control or interrupt urb */
+ if (!ictx->tx_control) {
+ pipe = usb_sndintpipe(ictx->usbdev_intf0,
+ ictx->tx_endpoint->bEndpointAddress);
+ interval = ictx->tx_endpoint->bInterval;
+
+ usb_fill_int_urb(ictx->tx_urb, ictx->usbdev_intf0, pipe,
+ ictx->usb_tx_buf,
+ sizeof(ictx->usb_tx_buf),
+ usb_tx_callback, ictx, interval);
+
+ ictx->tx_urb->actual_length = 0;
+ } else {
+ /* fill request into kmalloc'ed space: */
+ control_req = kmalloc(sizeof(struct usb_ctrlrequest),
+ GFP_KERNEL);
+ if (control_req == NULL)
+ return -ENOMEM;
+
+ /* setup packet is '21 09 0200 0001 0008' */
+ control_req->bRequestType = 0x21;
+ control_req->bRequest = 0x09;
+ control_req->wValue = cpu_to_le16(0x0200);
+ control_req->wIndex = cpu_to_le16(0x0001);
+ control_req->wLength = cpu_to_le16(0x0008);
+
+ /* control pipe is endpoint 0x00 */
+ pipe = usb_sndctrlpipe(ictx->usbdev_intf0, 0);
+
+ /* build the control urb */
+ usb_fill_control_urb(ictx->tx_urb, ictx->usbdev_intf0,
+ pipe, (unsigned char *)control_req,
+ ictx->usb_tx_buf,
+ sizeof(ictx->usb_tx_buf),
+ usb_tx_callback, ictx);
+ ictx->tx_urb->actual_length = 0;
+ }
+
+ init_completion(&ictx->tx.finished);
+ ictx->tx.busy = true;
+ smp_rmb(); /* ensure later readers know we're busy */
+
+ retval = usb_submit_urb(ictx->tx_urb, GFP_KERNEL);
+ if (retval) {
+ ictx->tx.busy = false;
+ smp_rmb(); /* ensure later readers know we're not busy */
+ pr_err("error submitting urb(%d)\n", retval);
+ } else {
+ /* Wait for transmission to complete (or abort) */
+ mutex_unlock(&ictx->lock);
+ retval = wait_for_completion_interruptible(
+ &ictx->tx.finished);
+ if (retval)
+ pr_err("task interrupted\n");
+ mutex_lock(&ictx->lock);
+
+ retval = ictx->tx.status;
+ if (retval)
+ pr_err("packet tx failed (%d)\n", retval);
+ }
+
+ kfree(control_req);
+
+ /*
+ * Induce a mandatory 5ms delay before returning, as otherwise,
+ * send_packet can get called so rapidly as to overwhelm the device,
+ * particularly on faster systems and/or those with quirky usb.
+ */
+ timeout = msecs_to_jiffies(5);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(timeout);
+
+ return retval;
+}
+
+/**
+ * Sends an associate packet to the iMON 2.4G.
+ *
+ * This might not be such a good idea, since it has an id collision with
+ * some versions of the "IR & VFD" combo. The only way to determine if it
+ * is an RF version is to look at the product description string. (Which
+ * we currently do not fetch).
+ */
+static int send_associate_24g(struct imon_context *ictx)
+{
+ int retval;
+ const unsigned char packet[8] = { 0x01, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x20 };
+
+ if (!ictx) {
+ pr_err("no context for device\n");
+ return -ENODEV;
+ }
+
+ if (!ictx->dev_present_intf0) {
+ pr_err("no iMON device present\n");
+ return -ENODEV;
+ }
+
+ memcpy(ictx->usb_tx_buf, packet, sizeof(packet));
+ retval = send_packet(ictx);
+
+ return retval;
+}
+
+/**
+ * Sends packets to setup and show clock on iMON display
+ *
+ * Arguments: year - last 2 digits of year, month - 1..12,
+ * day - 1..31, dow - day of the week (0-Sun...6-Sat),
+ * hour - 0..23, minute - 0..59, second - 0..59
+ */
+static int send_set_imon_clock(struct imon_context *ictx,
+ unsigned int year, unsigned int month,
+ unsigned int day, unsigned int dow,
+ unsigned int hour, unsigned int minute,
+ unsigned int second)
+{
+ unsigned char clock_enable_pkt[IMON_CLOCK_ENABLE_PACKETS][8];
+ int retval = 0;
+ int i;
+
+ if (!ictx) {
+ pr_err("no context for device\n");
+ return -ENODEV;
+ }
+
+ switch (ictx->display_type) {
+ case IMON_DISPLAY_TYPE_LCD:
+ clock_enable_pkt[0][0] = 0x80;
+ clock_enable_pkt[0][1] = year;
+ clock_enable_pkt[0][2] = month-1;
+ clock_enable_pkt[0][3] = day;
+ clock_enable_pkt[0][4] = hour;
+ clock_enable_pkt[0][5] = minute;
+ clock_enable_pkt[0][6] = second;
+
+ clock_enable_pkt[1][0] = 0x80;
+ clock_enable_pkt[1][1] = 0;
+ clock_enable_pkt[1][2] = 0;
+ clock_enable_pkt[1][3] = 0;
+ clock_enable_pkt[1][4] = 0;
+ clock_enable_pkt[1][5] = 0;
+ clock_enable_pkt[1][6] = 0;
+
+ if (ictx->product == 0xffdc) {
+ clock_enable_pkt[0][7] = 0x50;
+ clock_enable_pkt[1][7] = 0x51;
+ } else {
+ clock_enable_pkt[0][7] = 0x88;
+ clock_enable_pkt[1][7] = 0x8a;
+ }
+
+ break;
+
+ case IMON_DISPLAY_TYPE_VFD:
+ clock_enable_pkt[0][0] = year;
+ clock_enable_pkt[0][1] = month-1;
+ clock_enable_pkt[0][2] = day;
+ clock_enable_pkt[0][3] = dow;
+ clock_enable_pkt[0][4] = hour;
+ clock_enable_pkt[0][5] = minute;
+ clock_enable_pkt[0][6] = second;
+ clock_enable_pkt[0][7] = 0x40;
+
+ clock_enable_pkt[1][0] = 0;
+ clock_enable_pkt[1][1] = 0;
+ clock_enable_pkt[1][2] = 1;
+ clock_enable_pkt[1][3] = 0;
+ clock_enable_pkt[1][4] = 0;
+ clock_enable_pkt[1][5] = 0;
+ clock_enable_pkt[1][6] = 0;
+ clock_enable_pkt[1][7] = 0x42;
+
+ break;
+
+ default:
+ return -ENODEV;
+ }
+
+ for (i = 0; i < IMON_CLOCK_ENABLE_PACKETS; i++) {
+ memcpy(ictx->usb_tx_buf, clock_enable_pkt[i], 8);
+ retval = send_packet(ictx);
+ if (retval) {
+ pr_err("send_packet failed for packet %d\n", i);
+ break;
+ }
+ }
+
+ return retval;
+}
+
+/**
+ * These are the sysfs functions to handle the association on the iMON 2.4G LT.
+ */
+static ssize_t show_associate_remote(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct imon_context *ictx = dev_get_drvdata(d);
+
+ if (!ictx)
+ return -ENODEV;
+
+ mutex_lock(&ictx->lock);
+ if (ictx->rf_isassociating)
+ strcpy(buf, "associating\n");
+ else
+ strcpy(buf, "closed\n");
+
+ dev_info(d, "Visit http://www.lirc.org/html/imon-24g.html for "
+ "instructions on how to associate your iMON 2.4G DT/LT "
+ "remote\n");
+ mutex_unlock(&ictx->lock);
+ return strlen(buf);
+}
+
+static ssize_t store_associate_remote(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imon_context *ictx;
+
+ ictx = dev_get_drvdata(d);
+
+ if (!ictx)
+ return -ENODEV;
+
+ mutex_lock(&ictx->lock);
+ ictx->rf_isassociating = true;
+ send_associate_24g(ictx);
+ mutex_unlock(&ictx->lock);
+
+ return count;
+}
+
+/**
+ * sysfs functions to control internal imon clock
+ */
+static ssize_t show_imon_clock(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct imon_context *ictx = dev_get_drvdata(d);
+ size_t len;
+
+ if (!ictx)
+ return -ENODEV;
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ len = snprintf(buf, PAGE_SIZE, "Not supported.");
+ } else {
+ len = snprintf(buf, PAGE_SIZE,
+ "To set the clock on your iMON display:\n"
+ "# date \"+%%y %%m %%d %%w %%H %%M %%S\" > imon_clock\n"
+ "%s", ictx->display_isopen ?
+ "\nNOTE: imon device must be closed\n" : "");
+ }
+
+ mutex_unlock(&ictx->lock);
+
+ return len;
+}
+
+static ssize_t store_imon_clock(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct imon_context *ictx = dev_get_drvdata(d);
+ ssize_t retval;
+ unsigned int year, month, day, dow, hour, minute, second;
+
+ if (!ictx)
+ return -ENODEV;
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ retval = -ENODEV;
+ goto exit;
+ } else if (ictx->display_isopen) {
+ retval = -EBUSY;
+ goto exit;
+ }
+
+ if (sscanf(buf, "%u %u %u %u %u %u %u", &year, &month, &day, &dow,
+ &hour, &minute, &second) != 7) {
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ if ((month < 1 || month > 12) ||
+ (day < 1 || day > 31) || (dow > 6) ||
+ (hour > 23) || (minute > 59) || (second > 59)) {
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ retval = send_set_imon_clock(ictx, year, month, day, dow,
+ hour, minute, second);
+ if (retval)
+ goto exit;
+
+ retval = count;
+exit:
+ mutex_unlock(&ictx->lock);
+
+ return retval;
+}
+
+
+static DEVICE_ATTR(imon_clock, S_IWUSR | S_IRUGO, show_imon_clock,
+ store_imon_clock);
+
+static DEVICE_ATTR(associate_remote, S_IWUSR | S_IRUGO, show_associate_remote,
+ store_associate_remote);
+
+static struct attribute *imon_display_sysfs_entries[] = {
+ &dev_attr_imon_clock.attr,
+ NULL
+};
+
+static struct attribute_group imon_display_attr_group = {
+ .attrs = imon_display_sysfs_entries
+};
+
+static struct attribute *imon_rf_sysfs_entries[] = {
+ &dev_attr_associate_remote.attr,
+ NULL
+};
+
+static struct attribute_group imon_rf_attr_group = {
+ .attrs = imon_rf_sysfs_entries
+};
+
+/**
+ * Writes data to the VFD. The iMON VFD is 2x16 characters
+ * and requires data in 5 consecutive USB interrupt packets,
+ * each packet but the last carrying 7 bytes.
+ *
+ * I don't know if the VFD board supports features such as
+ * scrolling, clearing rows, blanking, etc. so at
+ * the caller must provide a full screen of data. If fewer
+ * than 32 bytes are provided spaces will be appended to
+ * generate a full screen.
+ */
+static ssize_t vfd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos)
+{
+ int i;
+ int offset;
+ int seq;
+ int retval = 0;
+ struct imon_context *ictx;
+ const unsigned char vfd_packet6[] = {
+ 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
+
+ ictx = file->private_data;
+ if (!ictx) {
+ pr_err("no context for device\n");
+ return -ENODEV;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->dev_present_intf0) {
+ pr_err("no iMON device present\n");
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ if (n_bytes <= 0 || n_bytes > 32) {
+ pr_err("invalid payload size\n");
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ if (copy_from_user(ictx->tx.data_buf, buf, n_bytes)) {
+ retval = -EFAULT;
+ goto exit;
+ }
+
+ /* Pad with spaces */
+ for (i = n_bytes; i < 32; ++i)
+ ictx->tx.data_buf[i] = ' ';
+
+ for (i = 32; i < 35; ++i)
+ ictx->tx.data_buf[i] = 0xFF;
+
+ offset = 0;
+ seq = 0;
+
+ do {
+ memcpy(ictx->usb_tx_buf, ictx->tx.data_buf + offset, 7);
+ ictx->usb_tx_buf[7] = (unsigned char) seq;
+
+ retval = send_packet(ictx);
+ if (retval) {
+ pr_err("send packet failed for packet #%d\n", seq / 2);
+ goto exit;
+ } else {
+ seq += 2;
+ offset += 7;
+ }
+
+ } while (offset < 35);
+
+ /* Send packet #6 */
+ memcpy(ictx->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
+ ictx->usb_tx_buf[7] = (unsigned char) seq;
+ retval = send_packet(ictx);
+ if (retval)
+ pr_err("send packet failed for packet #%d\n", seq / 2);
+
+exit:
+ mutex_unlock(&ictx->lock);
+
+ return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Writes data to the LCD. The iMON OEM LCD screen expects 8-byte
+ * packets. We accept data as 16 hexadecimal digits, followed by a
+ * newline (to make it easy to drive the device from a command-line
+ * -- even though the actual binary data is a bit complicated).
+ *
+ * The device itself is not a "traditional" text-mode display. It's
+ * actually a 16x96 pixel bitmap display. That means if you want to
+ * display text, you've got to have your own "font" and translate the
+ * text into bitmaps for display. This is really flexible (you can
+ * display whatever diacritics you need, and so on), but it's also
+ * a lot more complicated than most LCDs...
+ */
+static ssize_t lcd_write(struct file *file, const char *buf,
+ size_t n_bytes, loff_t *pos)
+{
+ int retval = 0;
+ struct imon_context *ictx;
+
+ ictx = file->private_data;
+ if (!ictx) {
+ pr_err("no context for device\n");
+ return -ENODEV;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (!ictx->display_supported) {
+ pr_err("no iMON display present\n");
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ if (n_bytes != 8) {
+ pr_err("invalid payload size: %d (expected 8)\n", (int)n_bytes);
+ retval = -EINVAL;
+ goto exit;
+ }
+
+ if (copy_from_user(ictx->usb_tx_buf, buf, 8)) {
+ retval = -EFAULT;
+ goto exit;
+ }
+
+ retval = send_packet(ictx);
+ if (retval) {
+ pr_err("send packet failed!\n");
+ goto exit;
+ } else {
+ dev_dbg(ictx->dev, "%s: write %d bytes to LCD\n",
+ __func__, (int) n_bytes);
+ }
+exit:
+ mutex_unlock(&ictx->lock);
+ return (!retval) ? n_bytes : retval;
+}
+
+/**
+ * Callback function for USB core API: transmit data
+ */
+static void usb_tx_callback(struct urb *urb)
+{
+ struct imon_context *ictx;
+
+ if (!urb)
+ return;
+ ictx = (struct imon_context *)urb->context;
+ if (!ictx)
+ return;
+
+ ictx->tx.status = urb->status;
+
+ /* notify waiters that write has finished */
+ ictx->tx.busy = false;
+ smp_rmb(); /* ensure later readers know we're not busy */
+ complete(&ictx->tx.finished);
+}
+
+/**
+ * report touchscreen input
+ */
+static void imon_touch_display_timeout(unsigned long data)
+{
+ struct imon_context *ictx = (struct imon_context *)data;
+
+ if (ictx->display_type != IMON_DISPLAY_TYPE_VGA)
+ return;
+
+ input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
+ input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
+ input_report_key(ictx->touch, BTN_TOUCH, 0x00);
+ input_sync(ictx->touch);
+}
+
+/**
+ * iMON IR receivers support two different signal sets -- those used by
+ * the iMON remotes, and those used by the Windows MCE remotes (which is
+ * really just RC-6), but only one or the other at a time, as the signals
+ * are decoded onboard the receiver.
+ */
+int imon_ir_change_protocol(void *priv, u64 ir_type)
+{
+ int retval;
+ struct imon_context *ictx = priv;
+ struct device *dev = ictx->dev;
+ bool pad_mouse;
+ unsigned char ir_proto_packet[] = {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
+
+ if (ir_type && !(ir_type & ictx->props->allowed_protos))
+ dev_warn(dev, "Looks like you're trying to use an IR protocol "
+ "this device does not support\n");
+
+ switch (ir_type) {
+ case IR_TYPE_RC6:
+ dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
+ ir_proto_packet[0] = 0x01;
+ pad_mouse = false;
+ break;
+ case IR_TYPE_UNKNOWN:
+ case IR_TYPE_OTHER:
+ dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
+ if (pad_stabilize && !nomouse)
+ pad_mouse = true;
+ else {
+ dev_dbg(dev, "PAD stabilize functionality disabled\n");
+ pad_mouse = false;
+ }
+ /* ir_proto_packet[0] = 0x00; // already the default */
+ ir_type = IR_TYPE_OTHER;
+ break;
+ default:
+ dev_warn(dev, "Unsupported IR protocol specified, overriding "
+ "to iMON IR protocol\n");
+ if (pad_stabilize && !nomouse)
+ pad_mouse = true;
+ else {
+ dev_dbg(dev, "PAD stabilize functionality disabled\n");
+ pad_mouse = false;
+ }
+ /* ir_proto_packet[0] = 0x00; // already the default */
+ ir_type = IR_TYPE_OTHER;
+ break;
+ }
+
+ memcpy(ictx->usb_tx_buf, &ir_proto_packet, sizeof(ir_proto_packet));
+
+ retval = send_packet(ictx);
+ if (retval)
+ goto out;
+
+ ictx->ir_type = ir_type;
+ ictx->pad_mouse = pad_mouse;
+
+out:
+ return retval;
+}
+
+static inline int tv2int(const struct timeval *a, const struct timeval *b)
+{
+ int usecs = 0;
+ int sec = 0;
+
+ if (b->tv_usec > a->tv_usec) {
+ usecs = 1000000;
+ sec--;
+ }
+
+ usecs += a->tv_usec - b->tv_usec;
+
+ sec += a->tv_sec - b->tv_sec;
+ sec *= 1000;
+ usecs /= 1000;
+ sec += usecs;
+
+ if (sec < 0)
+ sec = 1000;
+
+ return sec;
+}
+
+/**
+ * The directional pad behaves a bit differently, depending on whether this is
+ * one of the older ffdc devices or a newer device. Newer devices appear to
+ * have a higher resolution matrix for more precise mouse movement, but it
+ * makes things overly sensitive in keyboard mode, so we do some interesting
+ * contortions to make it less touchy. Older devices run through the same
+ * routine with shorter timeout and a smaller threshold.
+ */
+static int stabilize(int a, int b, u16 timeout, u16 threshold)
+{
+ struct timeval ct;
+ static struct timeval prev_time = {0, 0};
+ static struct timeval hit_time = {0, 0};
+ static int x, y, prev_result, hits;
+ int result = 0;
+ int msec, msec_hit;
+
+ do_gettimeofday(&ct);
+ msec = tv2int(&ct, &prev_time);
+ msec_hit = tv2int(&ct, &hit_time);
+
+ if (msec > 100) {
+ x = 0;
+ y = 0;
+ hits = 0;
+ }
+
+ x += a;
+ y += b;
+
+ prev_time = ct;
+
+ if (abs(x) > threshold || abs(y) > threshold) {
+ if (abs(y) > abs(x))
+ result = (y > 0) ? 0x7F : 0x80;
+ else
+ result = (x > 0) ? 0x7F00 : 0x8000;
+
+ x = 0;
+ y = 0;
+
+ if (result == prev_result) {
+ hits++;
+
+ if (hits > 3) {
+ switch (result) {
+ case 0x7F:
+ y = 17 * threshold / 30;
+ break;
+ case 0x80:
+ y -= 17 * threshold / 30;
+ break;
+ case 0x7F00:
+ x = 17 * threshold / 30;
+ break;
+ case 0x8000:
+ x -= 17 * threshold / 30;
+ break;
+ }
+ }
+
+ if (hits == 2 && msec_hit < timeout) {
+ result = 0;
+ hits = 1;
+ }
+ } else {
+ prev_result = result;
+ hits = 1;
+ hit_time = ct;
+ }
+ }
+
+ return result;
+}
+
+static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode)
+{
+ u32 keycode;
+ u32 release;
+ bool is_release_code = false;
+
+ /* Look for the initial press of a button */
+ keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+ ictx->rc_toggle = 0x0;
+ ictx->rc_scancode = scancode;
+
+ /* Look for the release of a button */
+ if (keycode == KEY_RESERVED) {
+ release = scancode & ~0x4000;
+ keycode = ir_g_keycode_from_table(ictx->rdev, release);
+ if (keycode != KEY_RESERVED)
+ is_release_code = true;
+ }
+
+ ictx->release_code = is_release_code;
+
+ return keycode;
+}
+
+static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode)
+{
+ u32 keycode;
+
+#define MCE_KEY_MASK 0x7000
+#define MCE_TOGGLE_BIT 0x8000
+
+ /*
+ * On some receivers, mce keys decode to 0x8000f04xx and 0x8000f84xx
+ * (the toggle bit flipping between alternating key presses), while
+ * on other receivers, we see 0x8000f74xx and 0x8000ff4xx. To keep
+ * the table trim, we always or in the bits to look up 0x8000ff4xx,
+ * but we can't or them into all codes, as some keys are decoded in
+ * a different way w/o the same use of the toggle bit...
+ */
+ if (scancode & 0x80000000)
+ scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
+
+ ictx->rc_scancode = scancode;
+ keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+
+ /* not used in mce mode, but make sure we know its false */
+ ictx->release_code = false;
+
+ return keycode;
+}
+
+static u32 imon_panel_key_lookup(u64 code)
+{
+ int i;
+ u32 keycode = KEY_RESERVED;
+
+ for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
+ if (imon_panel_key_table[i].hw_code == (code | 0xffee)) {
+ keycode = imon_panel_key_table[i].keycode;
+ break;
+ }
+ }
+
+ return keycode;
+}
+
+static bool imon_mouse_event(struct imon_context *ictx,
+ unsigned char *buf, int len)
+{
+ char rel_x = 0x00, rel_y = 0x00;
+ u8 right_shift = 1;
+ bool mouse_input = true;
+ int dir = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+
+ /* newer iMON device PAD or mouse button */
+ if (ictx->product != 0xffdc && (buf[0] & 0x01) && len == 5) {
+ rel_x = buf[2];
+ rel_y = buf[3];
+ right_shift = 1;
+ /* 0xffdc iMON PAD or mouse button input */
+ } else if (ictx->product == 0xffdc && (buf[0] & 0x40) &&
+ !((buf[1] & 0x01) || ((buf[1] >> 2) & 0x01))) {
+ rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
+ (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
+ if (buf[0] & 0x02)
+ rel_x |= ~0x0f;
+ rel_x = rel_x + rel_x / 2;
+ rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
+ (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
+ if (buf[0] & 0x01)
+ rel_y |= ~0x0f;
+ rel_y = rel_y + rel_y / 2;
+ right_shift = 2;
+ /* some ffdc devices decode mouse buttons differently... */
+ } else if (ictx->product == 0xffdc && (buf[0] == 0x68)) {
+ right_shift = 2;
+ /* ch+/- buttons, which we use for an emulated scroll wheel */
+ } else if (ictx->kc == KEY_CHANNELUP && (buf[2] & 0x40) != 0x40) {
+ dir = 1;
+ } else if (ictx->kc == KEY_CHANNELDOWN && (buf[2] & 0x40) != 0x40) {
+ dir = -1;
+ } else
+ mouse_input = false;
+
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+ if (mouse_input) {
+ dev_dbg(ictx->dev, "sending mouse data via input subsystem\n");
+
+ if (dir) {
+ input_report_rel(ictx->idev, REL_WHEEL, dir);
+ } else if (rel_x || rel_y) {
+ input_report_rel(ictx->idev, REL_X, rel_x);
+ input_report_rel(ictx->idev, REL_Y, rel_y);
+ } else {
+ input_report_key(ictx->idev, BTN_LEFT, buf[1] & 0x1);
+ input_report_key(ictx->idev, BTN_RIGHT,
+ buf[1] >> right_shift & 0x1);
+ }
+ input_sync(ictx->idev);
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+ ictx->last_keycode = ictx->kc;
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+ }
+
+ return mouse_input;
+}
+
+static void imon_touch_event(struct imon_context *ictx, unsigned char *buf)
+{
+ mod_timer(&ictx->ttimer, jiffies + TOUCH_TIMEOUT);
+ ictx->touch_x = (buf[0] << 4) | (buf[1] >> 4);
+ ictx->touch_y = 0xfff - ((buf[2] << 4) | (buf[1] & 0xf));
+ input_report_abs(ictx->touch, ABS_X, ictx->touch_x);
+ input_report_abs(ictx->touch, ABS_Y, ictx->touch_y);
+ input_report_key(ictx->touch, BTN_TOUCH, 0x01);
+ input_sync(ictx->touch);
+}
+
+static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
+{
+ int dir = 0;
+ char rel_x = 0x00, rel_y = 0x00;
+ u16 timeout, threshold;
+ u32 scancode = KEY_RESERVED;
+ unsigned long flags;
+
+ /*
+ * The imon directional pad functions more like a touchpad. Bytes 3 & 4
+ * contain a position coordinate (x,y), with each component ranging
+ * from -14 to 14. We want to down-sample this to only 4 discrete values
+ * for up/down/left/right arrow keys. Also, when you get too close to
+ * diagonals, it has a tendancy to jump back and forth, so lets try to
+ * ignore when they get too close.
+ */
+ if (ictx->product != 0xffdc) {
+ /* first, pad to 8 bytes so it conforms with everything else */
+ buf[5] = buf[6] = buf[7] = 0;
+ timeout = 500; /* in msecs */
+ /* (2*threshold) x (2*threshold) square */
+ threshold = pad_thresh ? pad_thresh : 28;
+ rel_x = buf[2];
+ rel_y = buf[3];
+
+ if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
+ if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
+ dir = stabilize((int)rel_x, (int)rel_y,
+ timeout, threshold);
+ if (!dir) {
+ spin_lock_irqsave(&ictx->kc_lock,
+ flags);
+ ictx->kc = KEY_UNKNOWN;
+ spin_unlock_irqrestore(&ictx->kc_lock,
+ flags);
+ return;
+ }
+ buf[2] = dir & 0xFF;
+ buf[3] = (dir >> 8) & 0xFF;
+ scancode = be32_to_cpu(*((u32 *)buf));
+ }
+ } else {
+ /*
+ * Hack alert: instead of using keycodes, we have
+ * to use hard-coded scancodes here...
+ */
+ if (abs(rel_y) > abs(rel_x)) {
+ buf[2] = (rel_y > 0) ? 0x7F : 0x80;
+ buf[3] = 0;
+ if (rel_y > 0)
+ scancode = 0x01007f00; /* KEY_DOWN */
+ else
+ scancode = 0x01008000; /* KEY_UP */
+ } else {
+ buf[2] = 0;
+ buf[3] = (rel_x > 0) ? 0x7F : 0x80;
+ if (rel_x > 0)
+ scancode = 0x0100007f; /* KEY_RIGHT */
+ else
+ scancode = 0x01000080; /* KEY_LEFT */
+ }
+ }
+
+ /*
+ * Handle on-board decoded pad events for e.g. older VFD/iMON-Pad
+ * device (15c2:ffdc). The remote generates various codes from
+ * 0x68nnnnB7 to 0x6AnnnnB7, the left mouse button generates
+ * 0x688301b7 and the right one 0x688481b7. All other keys generate
+ * 0x2nnnnnnn. Position coordinate is encoded in buf[1] and buf[2] with
+ * reversed endianess. Extract direction from buffer, rotate endianess,
+ * adjust sign and feed the values into stabilize(). The resulting codes
+ * will be 0x01008000, 0x01007F00, which match the newer devices.
+ */
+ } else {
+ timeout = 10; /* in msecs */
+ /* (2*threshold) x (2*threshold) square */
+ threshold = pad_thresh ? pad_thresh : 15;
+
+ /* buf[1] is x */
+ rel_x = (buf[1] & 0x08) | (buf[1] & 0x10) >> 2 |
+ (buf[1] & 0x20) >> 4 | (buf[1] & 0x40) >> 6;
+ if (buf[0] & 0x02)
+ rel_x |= ~0x10+1;
+ /* buf[2] is y */
+ rel_y = (buf[2] & 0x08) | (buf[2] & 0x10) >> 2 |
+ (buf[2] & 0x20) >> 4 | (buf[2] & 0x40) >> 6;
+ if (buf[0] & 0x01)
+ rel_y |= ~0x10+1;
+
+ buf[0] = 0x01;
+ buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
+
+ if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
+ dir = stabilize((int)rel_x, (int)rel_y,
+ timeout, threshold);
+ if (!dir) {
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+ ictx->kc = KEY_UNKNOWN;
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+ return;
+ }
+ buf[2] = dir & 0xFF;
+ buf[3] = (dir >> 8) & 0xFF;
+ scancode = be32_to_cpu(*((u32 *)buf));
+ } else {
+ /*
+ * Hack alert: instead of using keycodes, we have
+ * to use hard-coded scancodes here...
+ */
+ if (abs(rel_y) > abs(rel_x)) {
+ buf[2] = (rel_y > 0) ? 0x7F : 0x80;
+ buf[3] = 0;
+ if (rel_y > 0)
+ scancode = 0x01007f00; /* KEY_DOWN */
+ else
+ scancode = 0x01008000; /* KEY_UP */
+ } else {
+ buf[2] = 0;
+ buf[3] = (rel_x > 0) ? 0x7F : 0x80;
+ if (rel_x > 0)
+ scancode = 0x0100007f; /* KEY_RIGHT */
+ else
+ scancode = 0x01000080; /* KEY_LEFT */
+ }
+ }
+ }
+
+ if (scancode) {
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+ ictx->kc = imon_remote_key_lookup(ictx, scancode);
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+ }
+}
+
+/**
+ * figure out if these is a press or a release. We don't actually
+ * care about repeats, as those will be auto-generated within the IR
+ * subsystem for repeating scancodes.
+ */
+static int imon_parse_press_type(struct imon_context *ictx,
+ unsigned char *buf, u8 ktype)
+{
+ int press_type = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+
+ /* key release of 0x02XXXXXX key */
+ if (ictx->kc == KEY_RESERVED && buf[0] == 0x02 && buf[3] == 0x00)
+ ictx->kc = ictx->last_keycode;
+
+ /* mouse button release on (some) 0xffdc devices */
+ else if (ictx->kc == KEY_RESERVED && buf[0] == 0x68 && buf[1] == 0x82 &&
+ buf[2] == 0x81 && buf[3] == 0xb7)
+ ictx->kc = ictx->last_keycode;
+
+ /* mouse button release on (some other) 0xffdc devices */
+ else if (ictx->kc == KEY_RESERVED && buf[0] == 0x01 && buf[1] == 0x00 &&
+ buf[2] == 0x81 && buf[3] == 0xb7)
+ ictx->kc = ictx->last_keycode;
+
+ /* mce-specific button handling, no keyup events */
+ else if (ktype == IMON_KEY_MCE) {
+ ictx->rc_toggle = buf[2];
+ press_type = 1;
+
+ /* incoherent or irrelevant data */
+ } else if (ictx->kc == KEY_RESERVED)
+ press_type = -EINVAL;
+
+ /* key release of 0xXXXXXXb7 key */
+ else if (ictx->release_code)
+ press_type = 0;
+
+ /* this is a button press */
+ else
+ press_type = 1;
+
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+ return press_type;
+}
+
+/**
+ * Process the incoming packet
+ */
+static void imon_incoming_packet(struct imon_context *ictx,
+ struct urb *urb, int intf)
+{
+ int len = urb->actual_length;
+ unsigned char *buf = urb->transfer_buffer;
+ struct device *dev = ictx->dev;
+ unsigned long flags;
+ u32 kc;
+ bool norelease = false;
+ int i;
+ u64 scancode;
+ int press_type = 0;
+ int msec;
+ struct timeval t;
+ static struct timeval prev_time = { 0, 0 };
+ u8 ktype;
+
+ /* filter out junk data on the older 0xffdc imon devices */
+ if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
+ return;
+
+ /* Figure out what key was pressed */
+ if (len == 8 && buf[7] == 0xee) {
+ scancode = be64_to_cpu(*((u64 *)buf));
+ ktype = IMON_KEY_PANEL;
+ kc = imon_panel_key_lookup(scancode);
+ } else {
+ scancode = be32_to_cpu(*((u32 *)buf));
+ if (ictx->ir_type == IR_TYPE_RC6) {
+ ktype = IMON_KEY_IMON;
+ if (buf[0] == 0x80)
+ ktype = IMON_KEY_MCE;
+ kc = imon_mce_key_lookup(ictx, scancode);
+ } else {
+ ktype = IMON_KEY_IMON;
+ kc = imon_remote_key_lookup(ictx, scancode);
+ }
+ }
+
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+ /* keyboard/mouse mode toggle button */
+ if (kc == KEY_KEYBOARD && !ictx->release_code) {
+ ictx->last_keycode = kc;
+ if (!nomouse) {
+ ictx->pad_mouse = ~(ictx->pad_mouse) & 0x1;
+ dev_dbg(dev, "toggling to %s mode\n",
+ ictx->pad_mouse ? "mouse" : "keyboard");
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+ return;
+ } else {
+ ictx->pad_mouse = 0;
+ dev_dbg(dev, "mouse mode disabled, passing key value\n");
+ }
+ }
+
+ ictx->kc = kc;
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+ /* send touchscreen events through input subsystem if touchpad data */
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA && len == 8 &&
+ buf[7] == 0x86) {
+ imon_touch_event(ictx, buf);
+ return;
+
+ /* look for mouse events with pad in mouse mode */
+ } else if (ictx->pad_mouse) {
+ if (imon_mouse_event(ictx, buf, len))
+ return;
+ }
+
+ /* Now for some special handling to convert pad input to arrow keys */
+ if (((len == 5) && (buf[0] == 0x01) && (buf[4] == 0x00)) ||
+ ((len == 8) && (buf[0] & 0x40) &&
+ !(buf[1] & 0x1 || buf[1] >> 2 & 0x1))) {
+ len = 8;
+ imon_pad_to_keys(ictx, buf);
+ norelease = true;
+ }
+
+ if (debug) {
+ printk(KERN_INFO "intf%d decoded packet: ", intf);
+ for (i = 0; i < len; ++i)
+ printk("%02x ", buf[i]);
+ printk("\n");
+ }
+
+ press_type = imon_parse_press_type(ictx, buf, ktype);
+ if (press_type < 0)
+ goto not_input_data;
+
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+ if (ictx->kc == KEY_UNKNOWN)
+ goto unknown_key;
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+ if (ktype != IMON_KEY_PANEL) {
+ if (press_type == 0)
+ ir_keyup(ictx->rdev);
+ else {
+ ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+ ictx->last_keycode = ictx->kc;
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+ }
+ return;
+ }
+
+ /* Only panel type events left to process now */
+ spin_lock_irqsave(&ictx->kc_lock, flags);
+
+ /* KEY_MUTE repeats from knob need to be suppressed */
+ if (ictx->kc == KEY_MUTE && ictx->kc == ictx->last_keycode) {
+ do_gettimeofday(&t);
+ msec = tv2int(&t, &prev_time);
+ prev_time = t;
+ if (msec < ictx->idev->rep[REP_DELAY]) {
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+ return;
+ }
+ }
+ kc = ictx->kc;
+
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+
+ input_report_key(ictx->idev, kc, press_type);
+ input_sync(ictx->idev);
+
+ /* panel keys don't generate a release */
+ input_report_key(ictx->idev, kc, 0);
+ input_sync(ictx->idev);
+
+ ictx->last_keycode = kc;
+
+ return;
+
+unknown_key:
+ spin_unlock_irqrestore(&ictx->kc_lock, flags);
+ dev_info(dev, "%s: unknown keypress, code 0x%llx\n", __func__,
+ (long long)scancode);
+ return;
+
+not_input_data:
+ if (len != 8) {
+ dev_warn(dev, "imon %s: invalid incoming packet "
+ "size (len = %d, intf%d)\n", __func__, len, intf);
+ return;
+ }
+
+ /* iMON 2.4G associate frame */
+ if (buf[0] == 0x00 &&
+ buf[2] == 0xFF && /* REFID */
+ buf[3] == 0xFF &&
+ buf[4] == 0xFF &&
+ buf[5] == 0xFF && /* iMON 2.4G */
+ ((buf[6] == 0x4E && buf[7] == 0xDF) || /* LT */
+ (buf[6] == 0x5E && buf[7] == 0xDF))) { /* DT */
+ dev_warn(dev, "%s: remote associated refid=%02X\n",
+ __func__, buf[1]);
+ ictx->rf_isassociating = false;
+ }
+}
+
+/**
+ * Callback function for USB core API: receive data
+ */
+static void usb_rx_callback_intf0(struct urb *urb)
+{
+ struct imon_context *ictx;
+ int intfnum = 0;
+
+ if (!urb)
+ return;
+
+ ictx = (struct imon_context *)urb->context;
+ if (!ictx)
+ return;
+
+ switch (urb->status) {
+ case -ENOENT: /* usbcore unlink successful! */
+ return;
+
+ case -ESHUTDOWN: /* transport endpoint was shut down */
+ break;
+
+ case 0:
+ imon_incoming_packet(ictx, urb, intfnum);
+ break;
+
+ default:
+ dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
+ __func__, urb->status);
+ break;
+ }
+
+ usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
+}
+
+static void usb_rx_callback_intf1(struct urb *urb)
+{
+ struct imon_context *ictx;
+ int intfnum = 1;
+
+ if (!urb)
+ return;
+
+ ictx = (struct imon_context *)urb->context;
+ if (!ictx)
+ return;
+
+ switch (urb->status) {
+ case -ENOENT: /* usbcore unlink successful! */
+ return;
+
+ case -ESHUTDOWN: /* transport endpoint was shut down */
+ break;
+
+ case 0:
+ imon_incoming_packet(ictx, urb, intfnum);
+ break;
+
+ default:
+ dev_warn(ictx->dev, "imon %s: status(%d): ignored\n",
+ __func__, urb->status);
+ break;
+ }
+
+ usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
+}
+
+/*
+ * The 0x15c2:0xffdc device ID was used for umpteen different imon
+ * devices, and all of them constantly spew interrupts, even when there
+ * is no actual data to report. However, byte 6 of this buffer looks like
+ * its unique across device variants, so we're trying to key off that to
+ * figure out which display type (if any) and what IR protocol the device
+ * actually supports. These devices have their IR protocol hard-coded into
+ * their firmware, they can't be changed on the fly like the newer hardware.
+ */
+static void imon_get_ffdc_type(struct imon_context *ictx)
+{
+ u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
+ u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
+ u64 allowed_protos = IR_TYPE_OTHER;
+
+ switch (ffdc_cfg_byte) {
+ /* iMON Knob, no display, iMON IR + vol knob */
+ case 0x21:
+ dev_info(ictx->dev, "0xffdc iMON Knob, iMON IR");
+ ictx->display_supported = false;
+ break;
+ /* iMON 2.4G LT (usb stick), no display, iMON RF */
+ case 0x4e:
+ dev_info(ictx->dev, "0xffdc iMON 2.4G LT, iMON RF");
+ ictx->display_supported = false;
+ ictx->rf_device = true;
+ break;
+ /* iMON VFD, no IR (does have vol knob tho) */
+ case 0x35:
+ dev_info(ictx->dev, "0xffdc iMON VFD + knob, no IR");
+ detected_display_type = IMON_DISPLAY_TYPE_VFD;
+ break;
+ /* iMON VFD, iMON IR */
+ case 0x24:
+ case 0x85:
+ dev_info(ictx->dev, "0xffdc iMON VFD, iMON IR");
+ detected_display_type = IMON_DISPLAY_TYPE_VFD;
+ break;
+ /* iMON VFD, MCE IR */
+ case 0x9e:
+ dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
+ detected_display_type = IMON_DISPLAY_TYPE_VFD;
+ allowed_protos = IR_TYPE_RC6;
+ break;
+ /* iMON LCD, MCE IR */
+ case 0x9f:
+ dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
+ detected_display_type = IMON_DISPLAY_TYPE_LCD;
+ allowed_protos = IR_TYPE_RC6;
+ break;
+ default:
+ dev_info(ictx->dev, "Unknown 0xffdc device, "
+ "defaulting to VFD and iMON IR");
+ detected_display_type = IMON_DISPLAY_TYPE_VFD;
+ break;
+ }
+
+ printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
+
+ ictx->display_type = detected_display_type;
+ ictx->props->allowed_protos = allowed_protos;
+ ictx->ir_type = allowed_protos;
+}
+
+static void imon_set_display_type(struct imon_context *ictx)
+{
+ u8 configured_display_type = IMON_DISPLAY_TYPE_VFD;
+
+ /*
+ * Try to auto-detect the type of display if the user hasn't set
+ * it by hand via the display_type modparam. Default is VFD.
+ */
+
+ if (display_type == IMON_DISPLAY_TYPE_AUTO) {
+ switch (ictx->product) {
+ case 0xffdc:
+ /* set in imon_get_ffdc_type() */
+ configured_display_type = ictx->display_type;
+ break;
+ case 0x0034:
+ case 0x0035:
+ configured_display_type = IMON_DISPLAY_TYPE_VGA;
+ break;
+ case 0x0038:
+ case 0x0039:
+ case 0x0045:
+ configured_display_type = IMON_DISPLAY_TYPE_LCD;
+ break;
+ case 0x003c:
+ case 0x0041:
+ case 0x0042:
+ case 0x0043:
+ configured_display_type = IMON_DISPLAY_TYPE_NONE;
+ ictx->display_supported = false;
+ break;
+ case 0x0036:
+ case 0x0044:
+ default:
+ configured_display_type = IMON_DISPLAY_TYPE_VFD;
+ break;
+ }
+ } else {
+ configured_display_type = display_type;
+ if (display_type == IMON_DISPLAY_TYPE_NONE)
+ ictx->display_supported = false;
+ else
+ ictx->display_supported = true;
+ dev_info(ictx->dev, "%s: overriding display type to %d via "
+ "modparam\n", __func__, display_type);
+ }
+
+ ictx->display_type = configured_display_type;
+}
+
+static struct input_dev *imon_init_rdev(struct imon_context *ictx)
+{
+ struct input_dev *rdev;
+ struct ir_dev_props *props;
+ int ret;
+ char *ir_codes = NULL;
+ const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x88 };
+
+ rdev = input_allocate_device();
+ props = kzalloc(sizeof(*props), GFP_KERNEL);
+ if (!rdev || !props) {
+ dev_err(ictx->dev, "remote control dev allocation failed\n");
+ goto out;
+ }
+
+ snprintf(ictx->name_rdev, sizeof(ictx->name_rdev),
+ "iMON Remote (%04x:%04x)", ictx->vendor, ictx->product);
+ usb_make_path(ictx->usbdev_intf0, ictx->phys_rdev,
+ sizeof(ictx->phys_rdev));
+ strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
+
+ rdev->name = ictx->name_rdev;
+ rdev->phys = ictx->phys_rdev;
+ usb_to_input_id(ictx->usbdev_intf0, &rdev->id);
+ rdev->dev.parent = ictx->dev;
+ rdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_set_drvdata(rdev, ictx);
+
+ props->priv = ictx;
+ props->driver_type = RC_DRIVER_SCANCODE;
+ props->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
+ props->change_protocol = imon_ir_change_protocol;
+ ictx->props = props;
+
+ /* Enable front-panel buttons and/or knobs */
+ memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
+ ret = send_packet(ictx);
+ /* Not fatal, but warn about it */
+ if (ret)
+ dev_info(ictx->dev, "panel buttons/knobs setup failed\n");
+
+ if (ictx->product == 0xffdc)
+ imon_get_ffdc_type(ictx);
+
+ imon_set_display_type(ictx);
+
+ if (ictx->ir_type == IR_TYPE_RC6)
+ ir_codes = RC_MAP_IMON_MCE;
+ else
+ ir_codes = RC_MAP_IMON_PAD;
+
+ ret = ir_input_register(rdev, ir_codes, props, MOD_NAME);
+ if (ret < 0) {
+ dev_err(ictx->dev, "remote input dev register failed\n");
+ goto out;
+ }
+
+ return rdev;
+
+out:
+ kfree(props);
+ input_free_device(rdev);
+ return NULL;
+}
+
+static struct input_dev *imon_init_idev(struct imon_context *ictx)
+{
+ struct input_dev *idev;
+ int ret, i;
+
+ idev = input_allocate_device();
+ if (!idev) {
+ dev_err(ictx->dev, "input dev allocation failed\n");
+ goto out;
+ }
+
+ snprintf(ictx->name_idev, sizeof(ictx->name_idev),
+ "iMON Panel, Knob and Mouse(%04x:%04x)",
+ ictx->vendor, ictx->product);
+ idev->name = ictx->name_idev;
+
+ usb_make_path(ictx->usbdev_intf0, ictx->phys_idev,
+ sizeof(ictx->phys_idev));
+ strlcat(ictx->phys_idev, "/input1", sizeof(ictx->phys_idev));
+ idev->phys = ictx->phys_idev;
+
+ idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL);
+
+ idev->keybit[BIT_WORD(BTN_MOUSE)] =
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+ idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
+ BIT_MASK(REL_WHEEL);
+
+ /* panel and/or knob code support */
+ for (i = 0; i < ARRAY_SIZE(imon_panel_key_table); i++) {
+ u32 kc = imon_panel_key_table[i].keycode;
+ __set_bit(kc, idev->keybit);
+ }
+
+ usb_to_input_id(ictx->usbdev_intf0, &idev->id);
+ idev->dev.parent = ictx->dev;
+ input_set_drvdata(idev, ictx);
+
+ ret = input_register_device(idev);
+ if (ret < 0) {
+ dev_err(ictx->dev, "input dev register failed\n");
+ goto out;
+ }
+
+ return idev;
+
+out:
+ input_free_device(idev);
+ return NULL;
+}
+
+static struct input_dev *imon_init_touch(struct imon_context *ictx)
+{
+ struct input_dev *touch;
+ int ret;
+
+ touch = input_allocate_device();
+ if (!touch) {
+ dev_err(ictx->dev, "touchscreen input dev allocation failed\n");
+ goto touch_alloc_failed;
+ }
+
+ snprintf(ictx->name_touch, sizeof(ictx->name_touch),
+ "iMON USB Touchscreen (%04x:%04x)",
+ ictx->vendor, ictx->product);
+ touch->name = ictx->name_touch;
+
+ usb_make_path(ictx->usbdev_intf1, ictx->phys_touch,
+ sizeof(ictx->phys_touch));
+ strlcat(ictx->phys_touch, "/input2", sizeof(ictx->phys_touch));
+ touch->phys = ictx->phys_touch;
+
+ touch->evbit[0] =
+ BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ touch->keybit[BIT_WORD(BTN_TOUCH)] =
+ BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(touch, ABS_X,
+ 0x00, 0xfff, 0, 0);
+ input_set_abs_params(touch, ABS_Y,
+ 0x00, 0xfff, 0, 0);
+
+ input_set_drvdata(touch, ictx);
+
+ usb_to_input_id(ictx->usbdev_intf1, &touch->id);
+ touch->dev.parent = ictx->dev;
+ ret = input_register_device(touch);
+ if (ret < 0) {
+ dev_info(ictx->dev, "touchscreen input dev register failed\n");
+ goto touch_register_failed;
+ }
+
+ return touch;
+
+touch_register_failed:
+ input_free_device(ictx->touch);
+
+touch_alloc_failed:
+ return NULL;
+}
+
+static bool imon_find_endpoints(struct imon_context *ictx,
+ struct usb_host_interface *iface_desc)
+{
+ struct usb_endpoint_descriptor *ep;
+ struct usb_endpoint_descriptor *rx_endpoint = NULL;
+ struct usb_endpoint_descriptor *tx_endpoint = NULL;
+ int ifnum = iface_desc->desc.bInterfaceNumber;
+ int num_endpts = iface_desc->desc.bNumEndpoints;
+ int i, ep_dir, ep_type;
+ bool ir_ep_found = false;
+ bool display_ep_found = false;
+ bool tx_control = false;
+
+ /*
+ * Scan the endpoint list and set:
+ * first input endpoint = IR endpoint
+ * first output endpoint = display endpoint
+ */
+ for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
+ ep = &iface_desc->endpoint[i].desc;
+ ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+ ep_type = ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ if (!ir_ep_found && ep_dir == USB_DIR_IN &&
+ ep_type == USB_ENDPOINT_XFER_INT) {
+
+ rx_endpoint = ep;
+ ir_ep_found = true;
+ dev_dbg(ictx->dev, "%s: found IR endpoint\n", __func__);
+
+ } else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
+ ep_type == USB_ENDPOINT_XFER_INT) {
+ tx_endpoint = ep;
+ display_ep_found = true;
+ dev_dbg(ictx->dev, "%s: found display endpoint\n", __func__);
+ }
+ }
+
+ if (ifnum == 0) {
+ ictx->rx_endpoint_intf0 = rx_endpoint;
+ /*
+ * tx is used to send characters to lcd/vfd, associate RF
+ * remotes, set IR protocol, and maybe more...
+ */
+ ictx->tx_endpoint = tx_endpoint;
+ } else {
+ ictx->rx_endpoint_intf1 = rx_endpoint;
+ }
+
+ /*
+ * If we didn't find a display endpoint, this is probably one of the
+ * newer iMON devices that use control urb instead of interrupt
+ */
+ if (!display_ep_found) {
+ tx_control = true;
+ display_ep_found = true;
+ dev_dbg(ictx->dev, "%s: device uses control endpoint, not "
+ "interface OUT endpoint\n", __func__);
+ }
+
+ /*
+ * Some iMON receivers have no display. Unfortunately, it seems
+ * that SoundGraph recycles device IDs between devices both with
+ * and without... :\
+ */
+ if (ictx->display_type == IMON_DISPLAY_TYPE_NONE) {
+ display_ep_found = false;
+ dev_dbg(ictx->dev, "%s: device has no display\n", __func__);
+ }
+
+ /*
+ * iMON Touch devices have a VGA touchscreen, but no "display", as
+ * that refers to e.g. /dev/lcd0 (a character device LCD or VFD).
+ */
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+ display_ep_found = false;
+ dev_dbg(ictx->dev, "%s: iMON Touch device found\n", __func__);
+ }
+
+ /* Input endpoint is mandatory */
+ if (!ir_ep_found)
+ pr_err("no valid input (IR) endpoint found\n");
+
+ ictx->tx_control = tx_control;
+
+ if (display_ep_found)
+ ictx->display_supported = true;
+
+ return ir_ep_found;
+
+}
+
+static struct imon_context *imon_init_intf0(struct usb_interface *intf)
+{
+ struct imon_context *ictx;
+ struct urb *rx_urb;
+ struct urb *tx_urb;
+ struct device *dev = &intf->dev;
+ struct usb_host_interface *iface_desc;
+ int ret = -ENOMEM;
+
+ ictx = kzalloc(sizeof(struct imon_context), GFP_KERNEL);
+ if (!ictx) {
+ dev_err(dev, "%s: kzalloc failed for context", __func__);
+ goto exit;
+ }
+ rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!rx_urb) {
+ dev_err(dev, "%s: usb_alloc_urb failed for IR urb", __func__);
+ goto rx_urb_alloc_failed;
+ }
+ tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!tx_urb) {
+ dev_err(dev, "%s: usb_alloc_urb failed for display urb",
+ __func__);
+ goto tx_urb_alloc_failed;
+ }
+
+ mutex_init(&ictx->lock);
+ spin_lock_init(&ictx->kc_lock);
+
+ mutex_lock(&ictx->lock);
+
+ ictx->dev = dev;
+ ictx->usbdev_intf0 = usb_get_dev(interface_to_usbdev(intf));
+ ictx->dev_present_intf0 = true;
+ ictx->rx_urb_intf0 = rx_urb;
+ ictx->tx_urb = tx_urb;
+ ictx->rf_device = false;
+
+ ictx->vendor = le16_to_cpu(ictx->usbdev_intf0->descriptor.idVendor);
+ ictx->product = le16_to_cpu(ictx->usbdev_intf0->descriptor.idProduct);
+
+ ret = -ENODEV;
+ iface_desc = intf->cur_altsetting;
+ if (!imon_find_endpoints(ictx, iface_desc)) {
+ goto find_endpoint_failed;
+ }
+
+ ictx->idev = imon_init_idev(ictx);
+ if (!ictx->idev) {
+ dev_err(dev, "%s: input device setup failed\n", __func__);
+ goto idev_setup_failed;
+ }
+
+ ictx->rdev = imon_init_rdev(ictx);
+ if (!ictx->rdev) {
+ dev_err(dev, "%s: rc device setup failed\n", __func__);
+ goto rdev_setup_failed;
+ }
+
+ usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
+ usb_rcvintpipe(ictx->usbdev_intf0,
+ ictx->rx_endpoint_intf0->bEndpointAddress),
+ ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+ usb_rx_callback_intf0, ictx,
+ ictx->rx_endpoint_intf0->bInterval);
+
+ ret = usb_submit_urb(ictx->rx_urb_intf0, GFP_KERNEL);
+ if (ret) {
+ pr_err("usb_submit_urb failed for intf0 (%d)\n", ret);
+ goto urb_submit_failed;
+ }
+
+ return ictx;
+
+urb_submit_failed:
+ ir_input_unregister(ictx->rdev);
+rdev_setup_failed:
+ input_unregister_device(ictx->idev);
+idev_setup_failed:
+find_endpoint_failed:
+ mutex_unlock(&ictx->lock);
+ usb_free_urb(tx_urb);
+tx_urb_alloc_failed:
+ usb_free_urb(rx_urb);
+rx_urb_alloc_failed:
+ kfree(ictx);
+exit:
+ dev_err(dev, "unable to initialize intf0, err %d\n", ret);
+
+ return NULL;
+}
+
+static struct imon_context *imon_init_intf1(struct usb_interface *intf,
+ struct imon_context *ictx)
+{
+ struct urb *rx_urb;
+ struct usb_host_interface *iface_desc;
+ int ret = -ENOMEM;
+
+ rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!rx_urb) {
+ pr_err("usb_alloc_urb failed for IR urb\n");
+ goto rx_urb_alloc_failed;
+ }
+
+ mutex_lock(&ictx->lock);
+
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+ init_timer(&ictx->ttimer);
+ ictx->ttimer.data = (unsigned long)ictx;
+ ictx->ttimer.function = imon_touch_display_timeout;
+ }
+
+ ictx->usbdev_intf1 = usb_get_dev(interface_to_usbdev(intf));
+ ictx->dev_present_intf1 = true;
+ ictx->rx_urb_intf1 = rx_urb;
+
+ ret = -ENODEV;
+ iface_desc = intf->cur_altsetting;
+ if (!imon_find_endpoints(ictx, iface_desc))
+ goto find_endpoint_failed;
+
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA) {
+ ictx->touch = imon_init_touch(ictx);
+ if (!ictx->touch)
+ goto touch_setup_failed;
+ } else
+ ictx->touch = NULL;
+
+ usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
+ usb_rcvintpipe(ictx->usbdev_intf1,
+ ictx->rx_endpoint_intf1->bEndpointAddress),
+ ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+ usb_rx_callback_intf1, ictx,
+ ictx->rx_endpoint_intf1->bInterval);
+
+ ret = usb_submit_urb(ictx->rx_urb_intf1, GFP_KERNEL);
+
+ if (ret) {
+ pr_err("usb_submit_urb failed for intf1 (%d)\n", ret);
+ goto urb_submit_failed;
+ }
+
+ return ictx;
+
+urb_submit_failed:
+ if (ictx->touch)
+ input_unregister_device(ictx->touch);
+touch_setup_failed:
+find_endpoint_failed:
+ mutex_unlock(&ictx->lock);
+ usb_free_urb(rx_urb);
+rx_urb_alloc_failed:
+ dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret);
+
+ return NULL;
+}
+
+static void imon_init_display(struct imon_context *ictx,
+ struct usb_interface *intf)
+{
+ int ret;
+
+ dev_dbg(ictx->dev, "Registering iMON display with sysfs\n");
+
+ /* set up sysfs entry for built-in clock */
+ ret = sysfs_create_group(&intf->dev.kobj, &imon_display_attr_group);
+ if (ret)
+ dev_err(ictx->dev, "Could not create display sysfs "
+ "entries(%d)", ret);
+
+ if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
+ ret = usb_register_dev(intf, &imon_lcd_class);
+ else
+ ret = usb_register_dev(intf, &imon_vfd_class);
+ if (ret)
+ /* Not a fatal error, so ignore */
+ dev_info(ictx->dev, "could not get a minor number for "
+ "display\n");
+
+}
+
+/**
+ * Callback function for USB core API: Probe
+ */
+static int __devinit imon_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = NULL;
+ struct usb_host_interface *iface_desc = NULL;
+ struct usb_interface *first_if;
+ struct device *dev = &interface->dev;
+ int ifnum, code_length, sysfs_err;
+ int ret = 0;
+ struct imon_context *ictx = NULL;
+ struct imon_context *first_if_ctx = NULL;
+ u16 vendor, product;
+
+ code_length = BUF_CHUNK_SIZE * 8;
+
+ usbdev = usb_get_dev(interface_to_usbdev(interface));
+ iface_desc = interface->cur_altsetting;
+ ifnum = iface_desc->desc.bInterfaceNumber;
+ vendor = le16_to_cpu(usbdev->descriptor.idVendor);
+ product = le16_to_cpu(usbdev->descriptor.idProduct);
+
+ dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
+ __func__, vendor, product, ifnum);
+
+ /* prevent races probing devices w/multiple interfaces */
+ mutex_lock(&driver_lock);
+
+ first_if = usb_ifnum_to_if(usbdev, 0);
+ first_if_ctx = (struct imon_context *)usb_get_intfdata(first_if);
+
+ if (ifnum == 0) {
+ ictx = imon_init_intf0(interface);
+ if (!ictx) {
+ pr_err("failed to initialize context!\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ } else {
+ /* this is the secondary interface on the device */
+ ictx = imon_init_intf1(interface, first_if_ctx);
+ if (!ictx) {
+ pr_err("failed to attach to context!\n");
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ }
+
+ usb_set_intfdata(interface, ictx);
+
+ if (ifnum == 0) {
+ if (product == 0xffdc && ictx->rf_device) {
+ sysfs_err = sysfs_create_group(&interface->dev.kobj,
+ &imon_rf_attr_group);
+ if (sysfs_err)
+ pr_err("Could not create RF sysfs entries(%d)\n",
+ sysfs_err);
+ }
+
+ if (ictx->display_supported)
+ imon_init_display(ictx, interface);
+ }
+
+ dev_info(dev, "iMON device (%04x:%04x, intf%d) on "
+ "usb<%d:%d> initialized\n", vendor, product, ifnum,
+ usbdev->bus->busnum, usbdev->devnum);
+
+ mutex_unlock(&ictx->lock);
+ mutex_unlock(&driver_lock);
+
+ return 0;
+
+fail:
+ mutex_unlock(&driver_lock);
+ dev_err(dev, "unable to register, err %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * Callback function for USB core API: disconnect
+ */
+static void __devexit imon_disconnect(struct usb_interface *interface)
+{
+ struct imon_context *ictx;
+ struct device *dev;
+ int ifnum;
+
+ /* prevent races with multi-interface device probing and display_open */
+ mutex_lock(&driver_lock);
+
+ ictx = usb_get_intfdata(interface);
+ dev = ictx->dev;
+ ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
+
+ mutex_lock(&ictx->lock);
+
+ /*
+ * sysfs_remove_group is safe to call even if sysfs_create_group
+ * hasn't been called
+ */
+ sysfs_remove_group(&interface->dev.kobj, &imon_display_attr_group);
+ sysfs_remove_group(&interface->dev.kobj, &imon_rf_attr_group);
+
+ usb_set_intfdata(interface, NULL);
+
+ /* Abort ongoing write */
+ if (ictx->tx.busy) {
+ usb_kill_urb(ictx->tx_urb);
+ complete_all(&ictx->tx.finished);
+ }
+
+ if (ifnum == 0) {
+ ictx->dev_present_intf0 = false;
+ usb_kill_urb(ictx->rx_urb_intf0);
+ input_unregister_device(ictx->idev);
+ ir_input_unregister(ictx->rdev);
+ if (ictx->display_supported) {
+ if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
+ usb_deregister_dev(interface, &imon_lcd_class);
+ else
+ usb_deregister_dev(interface, &imon_vfd_class);
+ }
+ } else {
+ ictx->dev_present_intf1 = false;
+ usb_kill_urb(ictx->rx_urb_intf1);
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
+ input_unregister_device(ictx->touch);
+ }
+
+ if (!ictx->dev_present_intf0 && !ictx->dev_present_intf1) {
+ if (ictx->display_type == IMON_DISPLAY_TYPE_VGA)
+ del_timer_sync(&ictx->ttimer);
+ mutex_unlock(&ictx->lock);
+ if (!ictx->display_isopen)
+ free_imon_context(ictx);
+ } else
+ mutex_unlock(&ictx->lock);
+
+ mutex_unlock(&driver_lock);
+
+ dev_dbg(dev, "%s: iMON device (intf%d) disconnected\n",
+ __func__, ifnum);
+}
+
+static int imon_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct imon_context *ictx = usb_get_intfdata(intf);
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+ if (ifnum == 0)
+ usb_kill_urb(ictx->rx_urb_intf0);
+ else
+ usb_kill_urb(ictx->rx_urb_intf1);
+
+ return 0;
+}
+
+static int imon_resume(struct usb_interface *intf)
+{
+ int rc = 0;
+ struct imon_context *ictx = usb_get_intfdata(intf);
+ int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
+
+ if (ifnum == 0) {
+ usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0,
+ usb_rcvintpipe(ictx->usbdev_intf0,
+ ictx->rx_endpoint_intf0->bEndpointAddress),
+ ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+ usb_rx_callback_intf0, ictx,
+ ictx->rx_endpoint_intf0->bInterval);
+
+ rc = usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC);
+
+ } else {
+ usb_fill_int_urb(ictx->rx_urb_intf1, ictx->usbdev_intf1,
+ usb_rcvintpipe(ictx->usbdev_intf1,
+ ictx->rx_endpoint_intf1->bEndpointAddress),
+ ictx->usb_rx_buf, sizeof(ictx->usb_rx_buf),
+ usb_rx_callback_intf1, ictx,
+ ictx->rx_endpoint_intf1->bInterval);
+
+ rc = usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC);
+ }
+
+ return rc;
+}
+
+static int __init imon_init(void)
+{
+ int rc;
+
+ rc = usb_register(&imon_driver);
+ if (rc) {
+ pr_err("usb register failed(%d)\n", rc);
+ rc = -ENODEV;
+ }
+
+ return rc;
+}
+
+static void __exit imon_exit(void)
+{
+ usb_deregister(&imon_driver);
+}
+
+module_init(imon_init);
+module_exit(imon_exit);
--- /dev/null
+/*
+ * Remote Controller core raw events header
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _IR_RAW_EVENT
+#define _IR_RAW_EVENT
+
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <media/ir-core.h>
+
+struct ir_raw_handler {
+ struct list_head list;
+
+ u64 protocols; /* which are handled by this handler */
+ int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
+
+ /* These two should only be used by the lirc decoder */
+ int (*raw_register)(struct input_dev *input_dev);
+ int (*raw_unregister)(struct input_dev *input_dev);
+};
+
+struct ir_raw_event_ctrl {
+ struct list_head list; /* to keep track of raw clients */
+ struct task_struct *thread;
+ spinlock_t lock;
+ struct kfifo kfifo; /* fifo for the pulse/space durations */
+ ktime_t last_event; /* when last event occurred */
+ enum raw_event_type last_type; /* last event type */
+ struct input_dev *input_dev; /* pointer to the parent input_dev */
+ u64 enabled_protocols; /* enabled raw protocol decoders */
+
+ /* raw decoder state follows */
+ struct ir_raw_event prev_ev;
+ struct ir_raw_event this_ev;
+ struct nec_dec {
+ int state;
+ unsigned count;
+ u32 bits;
+ bool is_nec_x;
+ bool necx_repeat;
+ } nec;
+ struct rc5_dec {
+ int state;
+ u32 bits;
+ unsigned count;
+ unsigned wanted_bits;
+ } rc5;
+ struct rc6_dec {
+ int state;
+ u8 header;
+ u32 body;
+ bool toggle;
+ unsigned count;
+ unsigned wanted_bits;
+ } rc6;
+ struct sony_dec {
+ int state;
+ u32 bits;
+ unsigned count;
+ } sony;
+ struct jvc_dec {
+ int state;
+ u16 bits;
+ u16 old_bits;
+ unsigned count;
+ bool first;
+ bool toggle;
+ } jvc;
+ struct rc5_sz_dec {
+ int state;
+ u32 bits;
+ unsigned count;
+ unsigned wanted_bits;
+ } rc5_sz;
+ struct lirc_codec {
+ struct ir_input_dev *ir_dev;
+ struct lirc_driver *drv;
+ int carrier_low;
+
+ ktime_t gap_start;
+ u64 gap_duration;
+ bool gap;
+ bool send_timeout_reports;
+
+ } lirc;
+};
+
+/* macros for IR decoders */
+static inline bool geq_margin(unsigned d1, unsigned d2, unsigned margin)
+{
+ return d1 > (d2 - margin);
+}
+
+static inline bool eq_margin(unsigned d1, unsigned d2, unsigned margin)
+{
+ return ((d1 > (d2 - margin)) && (d1 < (d2 + margin)));
+}
+
+static inline bool is_transition(struct ir_raw_event *x, struct ir_raw_event *y)
+{
+ return x->pulse != y->pulse;
+}
+
+static inline void decrease_duration(struct ir_raw_event *ev, unsigned duration)
+{
+ if (duration > ev->duration)
+ ev->duration = 0;
+ else
+ ev->duration -= duration;
+}
+
+/* Returns true if event is normal pulse/space event */
+static inline bool is_timing_event(struct ir_raw_event ev)
+{
+ return !ev.carrier_report && !ev.reset;
+}
+
+#define TO_US(duration) DIV_ROUND_CLOSEST((duration), 1000)
+#define TO_STR(is_pulse) ((is_pulse) ? "pulse" : "space")
+/*
+ * Routines from ir-sysfs.c - Meant to be called only internally inside
+ * ir-core
+ */
+int ir_register_input(struct input_dev *input_dev);
+
+int ir_register_class(struct input_dev *input_dev);
+void ir_unregister_class(struct input_dev *input_dev);
+
+/*
+ * Routines from ir-raw-event.c to be used internally and by decoders
+ */
+u64 ir_raw_get_allowed_protocols(void);
+int ir_raw_event_register(struct input_dev *input_dev);
+void ir_raw_event_unregister(struct input_dev *input_dev);
+int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
+void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
+void ir_raw_init(void);
+
+int ir_rcmap_init(void);
+void ir_rcmap_cleanup(void);
+/*
+ * Decoder initialization code
+ *
+ * Those load logic are called during ir-core init, and automatically
+ * loads the compiled decoders for their usage with IR raw events
+ */
+
+/* from ir-nec-decoder.c */
+#ifdef CONFIG_IR_NEC_DECODER_MODULE
+#define load_nec_decode() request_module("ir-nec-decoder")
+#else
+#define load_nec_decode() 0
+#endif
+
+/* from ir-rc5-decoder.c */
+#ifdef CONFIG_IR_RC5_DECODER_MODULE
+#define load_rc5_decode() request_module("ir-rc5-decoder")
+#else
+#define load_rc5_decode() 0
+#endif
+
+/* from ir-rc6-decoder.c */
+#ifdef CONFIG_IR_RC6_DECODER_MODULE
+#define load_rc6_decode() request_module("ir-rc6-decoder")
+#else
+#define load_rc6_decode() 0
+#endif
+
+/* from ir-jvc-decoder.c */
+#ifdef CONFIG_IR_JVC_DECODER_MODULE
+#define load_jvc_decode() request_module("ir-jvc-decoder")
+#else
+#define load_jvc_decode() 0
+#endif
+
+/* from ir-sony-decoder.c */
+#ifdef CONFIG_IR_SONY_DECODER_MODULE
+#define load_sony_decode() request_module("ir-sony-decoder")
+#else
+#define load_sony_decode() 0
+#endif
+
+/* from ir-lirc-codec.c */
+#ifdef CONFIG_IR_LIRC_CODEC_MODULE
+#define load_lirc_codec() request_module("ir-lirc-codec")
+#else
+#define load_lirc_codec() 0
+#endif
+
+
+#endif /* _IR_RAW_EVENT */
--- /dev/null
+/*
+ * some common functions to handle infrared remote protocol decoding for
+ * drivers which have not yet been (or can't be) converted to use the
+ * regular protocol decoders...
+ *
+ * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/jiffies.h>
+#include <media/ir-common.h>
+#include "ir-core-priv.h"
+
+/* -------------------------------------------------------------------------- */
+
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL");
+
+/* RC5 decoding stuff, moved from bttv-input.c to share it with
+ * saa7134 */
+
+/* decode raw bit pattern to RC5 code */
+static u32 ir_rc5_decode(unsigned int code)
+{
+ unsigned int org_code = code;
+ unsigned int pair;
+ unsigned int rc5 = 0;
+ int i;
+
+ for (i = 0; i < 14; ++i) {
+ pair = code & 0x3;
+ code >>= 2;
+
+ rc5 <<= 1;
+ switch (pair) {
+ case 0:
+ case 2:
+ break;
+ case 1:
+ rc5 |= 1;
+ break;
+ case 3:
+ IR_dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
+ return 0;
+ }
+ }
+ IR_dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+ "instr=%x\n", rc5, org_code, RC5_START(rc5),
+ RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+ return rc5;
+}
+
+void ir_rc5_timer_end(unsigned long data)
+{
+ struct card_ir *ir = (struct card_ir *)data;
+ struct timeval tv;
+ unsigned long current_jiffies;
+ u32 gap;
+ u32 rc5 = 0;
+
+ /* get time */
+ current_jiffies = jiffies;
+ do_gettimeofday(&tv);
+
+ /* avoid overflow with gap >1s */
+ if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+ gap = 200000;
+ } else {
+ gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+ tv.tv_usec - ir->base_time.tv_usec;
+ }
+
+ /* signal we're ready to start a new code */
+ ir->active = 0;
+
+ /* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
+ if (gap < 28000) {
+ IR_dprintk(1, "ir-common: spurious timer_end\n");
+ return;
+ }
+
+ if (ir->last_bit < 20) {
+ /* ignore spurious codes (caused by light/other remotes) */
+ IR_dprintk(1, "ir-common: short code: %x\n", ir->code);
+ } else {
+ ir->code = (ir->code << ir->shift_by) | 1;
+ rc5 = ir_rc5_decode(ir->code);
+
+ /* two start bits? */
+ if (RC5_START(rc5) != ir->start) {
+ IR_dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+ /* right address? */
+ } else if (RC5_ADDR(rc5) == ir->addr) {
+ u32 toggle = RC5_TOGGLE(rc5);
+ u32 instr = RC5_INSTR(rc5);
+
+ /* Good code */
+ ir_keydown(ir->dev, instr, toggle);
+ IR_dprintk(1, "ir-common: instruction %x, toggle %x\n",
+ instr, toggle);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
--- /dev/null
+/* ir-jvc-decoder.c - handle JVC IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitrev.h>
+#include "ir-core-priv.h"
+
+#define JVC_NBITS 16 /* dev(8) + func(8) */
+#define JVC_UNIT 525000 /* ns */
+#define JVC_HEADER_PULSE (16 * JVC_UNIT) /* lack of header -> repeat */
+#define JVC_HEADER_SPACE (8 * JVC_UNIT)
+#define JVC_BIT_PULSE (1 * JVC_UNIT)
+#define JVC_BIT_0_SPACE (1 * JVC_UNIT)
+#define JVC_BIT_1_SPACE (3 * JVC_UNIT)
+#define JVC_TRAILER_PULSE (1 * JVC_UNIT)
+#define JVC_TRAILER_SPACE (35 * JVC_UNIT)
+
+enum jvc_state {
+ STATE_INACTIVE,
+ STATE_HEADER_SPACE,
+ STATE_BIT_PULSE,
+ STATE_BIT_SPACE,
+ STATE_TRAILER_PULSE,
+ STATE_TRAILER_SPACE,
+ STATE_CHECK_REPEAT,
+};
+
+/**
+ * ir_jvc_decode() - Decode one JVC pulse or space
+ * @input_dev: the struct input_dev descriptor of the device
+ * @duration: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct jvc_dec *data = &ir_dev->raw->jvc;
+
+ if (!(ir_dev->raw->enabled_protocols & IR_TYPE_JVC))
+ return 0;
+
+ if (!is_timing_event(ev)) {
+ if (ev.reset)
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+ if (!geq_margin(ev.duration, JVC_UNIT, JVC_UNIT / 2))
+ goto out;
+
+ IR_dprintk(2, "JVC decode started at state %d (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+again:
+ switch (data->state) {
+
+ case STATE_INACTIVE:
+ if (!ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+ break;
+
+ data->count = 0;
+ data->first = true;
+ data->toggle = !data->toggle;
+ data->state = STATE_HEADER_SPACE;
+ return 0;
+
+ case STATE_HEADER_SPACE:
+ if (ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, JVC_HEADER_SPACE, JVC_UNIT / 2))
+ break;
+
+ data->state = STATE_BIT_PULSE;
+ return 0;
+
+ case STATE_BIT_PULSE:
+ if (!ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, JVC_BIT_PULSE, JVC_UNIT / 2))
+ break;
+
+ data->state = STATE_BIT_SPACE;
+ return 0;
+
+ case STATE_BIT_SPACE:
+ if (ev.pulse)
+ break;
+
+ data->bits <<= 1;
+ if (eq_margin(ev.duration, JVC_BIT_1_SPACE, JVC_UNIT / 2)) {
+ data->bits |= 1;
+ decrease_duration(&ev, JVC_BIT_1_SPACE);
+ } else if (eq_margin(ev.duration, JVC_BIT_0_SPACE, JVC_UNIT / 2))
+ decrease_duration(&ev, JVC_BIT_0_SPACE);
+ else
+ break;
+ data->count++;
+
+ if (data->count == JVC_NBITS)
+ data->state = STATE_TRAILER_PULSE;
+ else
+ data->state = STATE_BIT_PULSE;
+ return 0;
+
+ case STATE_TRAILER_PULSE:
+ if (!ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, JVC_TRAILER_PULSE, JVC_UNIT / 2))
+ break;
+
+ data->state = STATE_TRAILER_SPACE;
+ return 0;
+
+ case STATE_TRAILER_SPACE:
+ if (ev.pulse)
+ break;
+
+ if (!geq_margin(ev.duration, JVC_TRAILER_SPACE, JVC_UNIT / 2))
+ break;
+
+ if (data->first) {
+ u32 scancode;
+ scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
+ (bitrev8((data->bits >> 0) & 0xff) << 0);
+ IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
+ ir_keydown(input_dev, scancode, data->toggle);
+ data->first = false;
+ data->old_bits = data->bits;
+ } else if (data->bits == data->old_bits) {
+ IR_dprintk(1, "JVC repeat\n");
+ ir_repeat(input_dev);
+ } else {
+ IR_dprintk(1, "JVC invalid repeat msg\n");
+ break;
+ }
+
+ data->count = 0;
+ data->state = STATE_CHECK_REPEAT;
+ return 0;
+
+ case STATE_CHECK_REPEAT:
+ if (!ev.pulse)
+ break;
+
+ if (eq_margin(ev.duration, JVC_HEADER_PULSE, JVC_UNIT / 2))
+ data->state = STATE_INACTIVE;
+ else
+ data->state = STATE_BIT_PULSE;
+ goto again;
+ }
+
+out:
+ IR_dprintk(1, "JVC decode failed at state %d (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+ data->state = STATE_INACTIVE;
+ return -EINVAL;
+}
+
+static struct ir_raw_handler jvc_handler = {
+ .protocols = IR_TYPE_JVC,
+ .decode = ir_jvc_decode,
+};
+
+static int __init ir_jvc_decode_init(void)
+{
+ ir_raw_handler_register(&jvc_handler);
+
+ printk(KERN_INFO "IR JVC protocol handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_jvc_decode_exit(void)
+{
+ ir_raw_handler_unregister(&jvc_handler);
+}
+
+module_init(ir_jvc_decode_init);
+module_exit(ir_jvc_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("JVC IR protocol decoder");
--- /dev/null
+/* ir-keytable.c - handle IR scancode->keycode tables
+ *
+ * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/input.h>
+#include <linux/slab.h>
+#include "ir-core-priv.h"
+
+/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
+#define IR_TAB_MIN_SIZE 256
+#define IR_TAB_MAX_SIZE 8192
+
+/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
+#define IR_KEYPRESS_TIMEOUT 250
+
+/**
+ * ir_create_table() - initializes a scancode table
+ * @rc_tab: the ir_scancode_table to initialize
+ * @name: name to assign to the table
+ * @ir_type: ir type to assign to the new table
+ * @size: initial size of the table
+ * @return: zero on success or a negative error code
+ *
+ * This routine will initialize the ir_scancode_table and will allocate
+ * memory to hold at least the specified number elements.
+ */
+static int ir_create_table(struct ir_scancode_table *rc_tab,
+ const char *name, u64 ir_type, size_t size)
+{
+ rc_tab->name = name;
+ rc_tab->ir_type = ir_type;
+ rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
+ rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+ rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
+ if (!rc_tab->scan)
+ return -ENOMEM;
+
+ IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+ rc_tab->size, rc_tab->alloc);
+ return 0;
+}
+
+/**
+ * ir_free_table() - frees memory allocated by a scancode table
+ * @rc_tab: the table whose mappings need to be freed
+ *
+ * This routine will free memory alloctaed for key mappings used by given
+ * scancode table.
+ */
+static void ir_free_table(struct ir_scancode_table *rc_tab)
+{
+ rc_tab->size = 0;
+ kfree(rc_tab->scan);
+ rc_tab->scan = NULL;
+}
+
+/**
+ * ir_resize_table() - resizes a scancode table if necessary
+ * @rc_tab: the ir_scancode_table to resize
+ * @gfp_flags: gfp flags to use when allocating memory
+ * @return: zero on success or a negative error code
+ *
+ * This routine will shrink the ir_scancode_table if it has lots of
+ * unused entries and grow it if it is full.
+ */
+static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
+{
+ unsigned int oldalloc = rc_tab->alloc;
+ unsigned int newalloc = oldalloc;
+ struct ir_scancode *oldscan = rc_tab->scan;
+ struct ir_scancode *newscan;
+
+ if (rc_tab->size == rc_tab->len) {
+ /* All entries in use -> grow keytable */
+ if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
+ return -ENOMEM;
+
+ newalloc *= 2;
+ IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
+ }
+
+ if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
+ /* Less than 1/3 of entries in use -> shrink keytable */
+ newalloc /= 2;
+ IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
+ }
+
+ if (newalloc == oldalloc)
+ return 0;
+
+ newscan = kmalloc(newalloc, gfp_flags);
+ if (!newscan) {
+ IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
+ return -ENOMEM;
+ }
+
+ memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
+ rc_tab->scan = newscan;
+ rc_tab->alloc = newalloc;
+ rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
+ kfree(oldscan);
+ return 0;
+}
+
+/**
+ * ir_update_mapping() - set a keycode in the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @rc_tab: scancode table to be adjusted
+ * @index: index of the mapping that needs to be updated
+ * @keycode: the desired keycode
+ * @return: previous keycode assigned to the mapping
+ *
+ * This routine is used to update scancode->keycopde mapping at given
+ * position.
+ */
+static unsigned int ir_update_mapping(struct input_dev *dev,
+ struct ir_scancode_table *rc_tab,
+ unsigned int index,
+ unsigned int new_keycode)
+{
+ int old_keycode = rc_tab->scan[index].keycode;
+ int i;
+
+ /* Did the user wish to remove the mapping? */
+ if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
+ IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
+ index, rc_tab->scan[index].scancode);
+ rc_tab->len--;
+ memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
+ (rc_tab->len - index) * sizeof(struct ir_scancode));
+ } else {
+ IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
+ index,
+ old_keycode == KEY_RESERVED ? "New" : "Replacing",
+ rc_tab->scan[index].scancode, new_keycode);
+ rc_tab->scan[index].keycode = new_keycode;
+ __set_bit(new_keycode, dev->keybit);
+ }
+
+ if (old_keycode != KEY_RESERVED) {
+ /* A previous mapping was updated... */
+ __clear_bit(old_keycode, dev->keybit);
+ /* ... but another scancode might use the same keycode */
+ for (i = 0; i < rc_tab->len; i++) {
+ if (rc_tab->scan[i].keycode == old_keycode) {
+ __set_bit(old_keycode, dev->keybit);
+ break;
+ }
+ }
+
+ /* Possibly shrink the keytable, failure is not a problem */
+ ir_resize_table(rc_tab, GFP_ATOMIC);
+ }
+
+ return old_keycode;
+}
+
+/**
+ * ir_locate_scancode() - set a keycode in the scancode->keycode table
+ * @ir_dev: the struct ir_input_dev device descriptor
+ * @rc_tab: scancode table to be searched
+ * @scancode: the desired scancode
+ * @resize: controls whether we allowed to resize the table to
+ * accomodate not yet present scancodes
+ * @return: index of the mapping containing scancode in question
+ * or -1U in case of failure.
+ *
+ * This routine is used to locate given scancode in ir_scancode_table.
+ * If scancode is not yet present the routine will allocate a new slot
+ * for it.
+ */
+static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
+ struct ir_scancode_table *rc_tab,
+ unsigned int scancode,
+ bool resize)
+{
+ unsigned int i;
+
+ /*
+ * Unfortunately, some hardware-based IR decoders don't provide
+ * all bits for the complete IR code. In general, they provide only
+ * the command part of the IR code. Yet, as it is possible to replace
+ * the provided IR with another one, it is needed to allow loading
+ * IR tables from other remotes. So,
+ */
+ if (ir_dev->props && ir_dev->props->scanmask)
+ scancode &= ir_dev->props->scanmask;
+
+ /* First check if we already have a mapping for this ir command */
+ for (i = 0; i < rc_tab->len; i++) {
+ if (rc_tab->scan[i].scancode == scancode)
+ return i;
+
+ /* Keytable is sorted from lowest to highest scancode */
+ if (rc_tab->scan[i].scancode >= scancode)
+ break;
+ }
+
+ /* No previous mapping found, we might need to grow the table */
+ if (rc_tab->size == rc_tab->len) {
+ if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
+ return -1U;
+ }
+
+ /* i is the proper index to insert our new keycode */
+ if (i < rc_tab->len)
+ memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
+ (rc_tab->len - i) * sizeof(struct ir_scancode));
+ rc_tab->scan[i].scancode = scancode;
+ rc_tab->scan[i].keycode = KEY_RESERVED;
+ rc_tab->len++;
+
+ return i;
+}
+
+/**
+ * ir_setkeycode() - set a keycode in the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @scancode: the desired scancode
+ * @keycode: result
+ * @return: -EINVAL if the keycode could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle evdev EVIOCSKEY ioctl.
+ */
+static int ir_setkeycode(struct input_dev *dev,
+ const struct input_keymap_entry *ke,
+ unsigned int *old_keycode)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ unsigned int index;
+ unsigned int scancode;
+ int retval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ index = ke->index;
+ if (index >= rc_tab->len) {
+ retval = -EINVAL;
+ goto out;
+ }
+ } else {
+ retval = input_scancode_to_scalar(ke, &scancode);
+ if (retval)
+ goto out;
+
+ index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
+ if (index >= rc_tab->len) {
+ retval = -ENOMEM;
+ goto out;
+ }
+ }
+
+ *old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
+
+out:
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+ return retval;
+}
+
+/**
+ * ir_setkeytable() - sets several entries in the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @to: the struct ir_scancode_table to copy entries to
+ * @from: the struct ir_scancode_table to copy entries from
+ * @return: -ENOMEM if all keycodes could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle table initialization.
+ */
+static int ir_setkeytable(struct ir_input_dev *ir_dev,
+ const struct ir_scancode_table *from)
+{
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ unsigned int i, index;
+ int rc;
+
+ rc = ir_create_table(&ir_dev->rc_tab,
+ from->name, from->ir_type, from->size);
+ if (rc)
+ return rc;
+
+ IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+ rc_tab->size, rc_tab->alloc);
+
+ for (i = 0; i < from->size; i++) {
+ index = ir_establish_scancode(ir_dev, rc_tab,
+ from->scan[i].scancode, false);
+ if (index >= rc_tab->len) {
+ rc = -ENOMEM;
+ break;
+ }
+
+ ir_update_mapping(ir_dev->input_dev, rc_tab, index,
+ from->scan[i].keycode);
+ }
+
+ if (rc)
+ ir_free_table(rc_tab);
+
+ return rc;
+}
+
+/**
+ * ir_lookup_by_scancode() - locate mapping by scancode
+ * @rc_tab: the &struct ir_scancode_table to search
+ * @scancode: scancode to look for in the table
+ * @return: index in the table, -1U if not found
+ *
+ * This routine performs binary search in RC keykeymap table for
+ * given scancode.
+ */
+static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
+ unsigned int scancode)
+{
+ int start = 0;
+ int end = rc_tab->len - 1;
+ int mid;
+
+ while (start <= end) {
+ mid = (start + end) / 2;
+ if (rc_tab->scan[mid].scancode < scancode)
+ start = mid + 1;
+ else if (rc_tab->scan[mid].scancode > scancode)
+ end = mid - 1;
+ else
+ return mid;
+ }
+
+ return -1U;
+}
+
+/**
+ * ir_getkeycode() - get a keycode from the scancode->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @scancode: the desired scancode
+ * @keycode: used to return the keycode, if found, or KEY_RESERVED
+ * @return: always returns zero.
+ *
+ * This routine is used to handle evdev EVIOCGKEY ioctl.
+ */
+static int ir_getkeycode(struct input_dev *dev,
+ struct input_keymap_entry *ke)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ struct ir_scancode *entry;
+ unsigned long flags;
+ unsigned int index;
+ unsigned int scancode;
+ int retval;
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+
+ if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+ index = ke->index;
+ } else {
+ retval = input_scancode_to_scalar(ke, &scancode);
+ if (retval)
+ goto out;
+
+ index = ir_lookup_by_scancode(rc_tab, scancode);
+ }
+
+ if (index >= rc_tab->len) {
+ if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
+ IR_dprintk(1, "unknown key for scancode 0x%04x\n",
+ scancode);
+ retval = -EINVAL;
+ goto out;
+ }
+
+ entry = &rc_tab->scan[index];
+
+ ke->index = index;
+ ke->keycode = entry->keycode;
+ ke->len = sizeof(entry->scancode);
+ memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
+
+ retval = 0;
+
+out:
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+ return retval;
+}
+
+/**
+ * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * @input_dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. The scancode is received and needs to be converted into a keycode.
+ * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
+ * corresponding keycode from the table.
+ */
+u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(dev);
+ struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
+ unsigned int keycode;
+ unsigned int index;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+
+ index = ir_lookup_by_scancode(rc_tab, scancode);
+ keycode = index < rc_tab->len ?
+ rc_tab->scan[index].keycode : KEY_RESERVED;
+
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+
+ if (keycode != KEY_RESERVED)
+ IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
+ dev->name, scancode, keycode);
+
+ return keycode;
+}
+EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
+
+/**
+ * ir_do_keyup() - internal function to signal the release of a keypress
+ * @ir: the struct ir_input_dev descriptor of the device
+ *
+ * This function is used internally to release a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keyup(struct ir_input_dev *ir)
+{
+ if (!ir->keypressed)
+ return;
+
+ IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
+ input_report_key(ir->input_dev, ir->last_keycode, 0);
+ input_sync(ir->input_dev);
+ ir->keypressed = false;
+}
+
+/**
+ * ir_keyup() - generates input event to signal the release of a keypress
+ * @dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to signal that a key has been released on the
+ * remote control.
+ */
+void ir_keyup(struct input_dev *dev)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keyup(ir);
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keyup);
+
+/**
+ * ir_timer_keyup() - generates a keyup event after a timeout
+ * @cookie: a pointer to struct ir_input_dev passed to setup_timer()
+ *
+ * This routine will generate a keyup event some time after a keydown event
+ * is generated when no further activity has been detected.
+ */
+static void ir_timer_keyup(unsigned long cookie)
+{
+ struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
+ unsigned long flags;
+
+ /*
+ * ir->keyup_jiffies is used to prevent a race condition if a
+ * hardware interrupt occurs at this point and the keyup timer
+ * event is moved further into the future as a result.
+ *
+ * The timer will then be reactivated and this function called
+ * again in the future. We need to exit gracefully in that case
+ * to allow the input subsystem to do its auto-repeat magic or
+ * a keyup event might follow immediately after the keydown.
+ */
+ spin_lock_irqsave(&ir->keylock, flags);
+ if (time_is_before_eq_jiffies(ir->keyup_jiffies))
+ ir_do_keyup(ir);
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+
+/**
+ * ir_repeat() - notifies the IR core that a key is still pressed
+ * @dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used by IR decoders when a repeat message which does
+ * not include the necessary bits to reproduce the scancode has been
+ * received.
+ */
+void ir_repeat(struct input_dev *dev)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+
+ input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
+
+ if (!ir->keypressed)
+ goto out;
+
+ ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+ mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+
+out:
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_repeat);
+
+/**
+ * ir_do_keydown() - internal function to process a keypress
+ * @dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode of the keypress
+ * @keycode: the keycode of the keypress
+ * @toggle: the toggle value of the keypress
+ *
+ * This function is used internally to register a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keydown(struct input_dev *dev, int scancode,
+ u32 keycode, u8 toggle)
+{
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+
+ input_event(dev, EV_MSC, MSC_SCAN, scancode);
+
+ /* Repeat event? */
+ if (ir->keypressed &&
+ ir->last_scancode == scancode &&
+ ir->last_toggle == toggle)
+ return;
+
+ /* Release old keypress */
+ ir_do_keyup(ir);
+
+ ir->last_scancode = scancode;
+ ir->last_toggle = toggle;
+ ir->last_keycode = keycode;
+
+ if (keycode == KEY_RESERVED)
+ return;
+
+ /* Register a keypress */
+ ir->keypressed = true;
+ IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
+ dev->name, keycode, scancode);
+ input_report_key(dev, ir->last_keycode, 1);
+ input_sync(dev);
+}
+
+/**
+ * ir_keydown() - generates input event for a key press
+ * @dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ * @toggle: the toggle value (protocol dependent, if the protocol doesn't
+ * support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key().
+ */
+void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+ u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keydown(dev, scancode, keycode, toggle);
+
+ if (ir->keypressed) {
+ ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+ mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
+ }
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown);
+
+/**
+ * ir_keydown_notimeout() - generates input event for a key press without
+ * an automatic keyup event at a later time
+ * @dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ * @toggle: the toggle value (protocol dependent, if the protocol doesn't
+ * support toggle values, this should be set to zero)
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. It gets the keycode for a scancode and reports an input event via
+ * input_report_key(). The driver must manually call ir_keyup() at a later
+ * stage.
+ */
+void ir_keydown_notimeout(struct input_dev *dev, int scancode, u8 toggle)
+{
+ unsigned long flags;
+ struct ir_input_dev *ir = input_get_drvdata(dev);
+ u32 keycode = ir_g_keycode_from_table(dev, scancode);
+
+ spin_lock_irqsave(&ir->keylock, flags);
+ ir_do_keydown(dev, scancode, keycode, toggle);
+ spin_unlock_irqrestore(&ir->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+
+static int ir_open(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ return ir_dev->props->open(ir_dev->props->priv);
+}
+
+static void ir_close(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ ir_dev->props->close(ir_dev->props->priv);
+}
+
+/**
+ * __ir_input_register() - sets the IR keycode table and add the handlers
+ * for keymap table get/set
+ * @input_dev: the struct input_dev descriptor of the device
+ * @rc_tab: the struct ir_scancode_table table of scancode/keymap
+ *
+ * This routine is used to initialize the input infrastructure
+ * to work with an IR.
+ * It will register the input/evdev interface for the device and
+ * register the syfs code for IR class
+ */
+int __ir_input_register(struct input_dev *input_dev,
+ const struct ir_scancode_table *rc_tab,
+ struct ir_dev_props *props,
+ const char *driver_name)
+{
+ struct ir_input_dev *ir_dev;
+ int rc;
+
+ if (rc_tab->scan == NULL || !rc_tab->size)
+ return -EINVAL;
+
+ ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
+ if (!ir_dev)
+ return -ENOMEM;
+
+ ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
+ if (!ir_dev->driver_name) {
+ rc = -ENOMEM;
+ goto out_dev;
+ }
+
+ input_dev->getkeycode_new = ir_getkeycode;
+ input_dev->setkeycode_new = ir_setkeycode;
+ input_set_drvdata(input_dev, ir_dev);
+ ir_dev->input_dev = input_dev;
+
+ spin_lock_init(&ir_dev->rc_tab.lock);
+ spin_lock_init(&ir_dev->keylock);
+ setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
+
+ if (props) {
+ ir_dev->props = props;
+ if (props->open)
+ input_dev->open = ir_open;
+ if (props->close)
+ input_dev->close = ir_close;
+ }
+
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(EV_REP, input_dev->evbit);
+ set_bit(EV_MSC, input_dev->evbit);
+ set_bit(MSC_SCAN, input_dev->mscbit);
+
+ rc = ir_setkeytable(ir_dev, rc_tab);
+ if (rc)
+ goto out_name;
+
+ rc = ir_register_class(input_dev);
+ if (rc < 0)
+ goto out_table;
+
+ if (ir_dev->props)
+ if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
+ rc = ir_raw_event_register(input_dev);
+ if (rc < 0)
+ goto out_event;
+ }
+
+ rc = ir_register_input(input_dev);
+ if (rc < 0)
+ goto out_event;
+
+ IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
+ driver_name, rc_tab->name,
+ (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
+ " in raw mode" : "");
+
+ /*
+ * Default delay of 250ms is too short for some protocols, expecially
+ * since the timeout is currently set to 250ms. Increase it to 500ms,
+ * to avoid wrong repetition of the keycodes.
+ */
+ input_dev->rep[REP_DELAY] = 500;
+
+ return 0;
+
+out_event:
+ ir_unregister_class(input_dev);
+out_table:
+ ir_free_table(&ir_dev->rc_tab);
+out_name:
+ kfree(ir_dev->driver_name);
+out_dev:
+ kfree(ir_dev);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(__ir_input_register);
+
+/**
+ * ir_input_unregister() - unregisters IR and frees resources
+ * @input_dev: the struct input_dev descriptor of the device
+
+ * This routine is used to free memory and de-register interfaces.
+ */
+void ir_input_unregister(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ if (!ir_dev)
+ return;
+
+ IR_dprintk(1, "Freed keycode table\n");
+
+ del_timer_sync(&ir_dev->timer_keyup);
+ if (ir_dev->props)
+ if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
+ ir_raw_event_unregister(input_dev);
+
+ ir_free_table(&ir_dev->rc_tab);
+
+ ir_unregister_class(input_dev);
+
+ kfree(ir_dev->driver_name);
+ kfree(ir_dev);
+}
+EXPORT_SYMBOL_GPL(ir_input_unregister);
+
+int ir_core_debug; /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(ir_core_debug);
+module_param_named(debug, ir_core_debug, int, 0644);
+
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* ir-lirc-codec.c - ir-core to classic lirc interface bridge
+ *
+ * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+#include <media/ir-core.h>
+#include "ir-core-priv.h"
+
+#define LIRCBUF_SIZE 256
+
+/**
+ * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
+ * lircd userspace daemon for decoding.
+ * @input_dev: the struct input_dev descriptor of the device
+ * @duration: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the lirc interfaces aren't wired up.
+ */
+static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct lirc_codec *lirc = &ir_dev->raw->lirc;
+ int sample;
+
+ if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
+ return 0;
+
+ if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
+ return -EINVAL;
+
+ /* Packet start */
+ if (ev.reset)
+ return 0;
+
+ /* Carrier reports */
+ if (ev.carrier_report) {
+ sample = LIRC_FREQUENCY(ev.carrier);
+
+ /* Packet end */
+ } else if (ev.timeout) {
+
+ if (lirc->gap)
+ return 0;
+
+ lirc->gap_start = ktime_get();
+ lirc->gap = true;
+ lirc->gap_duration = ev.duration;
+
+ if (!lirc->send_timeout_reports)
+ return 0;
+
+ sample = LIRC_TIMEOUT(ev.duration / 1000);
+
+ /* Normal sample */
+ } else {
+
+ if (lirc->gap) {
+ int gap_sample;
+
+ lirc->gap_duration += ktime_to_ns(ktime_sub(ktime_get(),
+ lirc->gap_start));
+
+ /* Convert to ms and cap by LIRC_VALUE_MASK */
+ do_div(lirc->gap_duration, 1000);
+ lirc->gap_duration = min(lirc->gap_duration,
+ (u64)LIRC_VALUE_MASK);
+
+ gap_sample = LIRC_SPACE(lirc->gap_duration);
+ lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+ (unsigned char *) &gap_sample);
+ lirc->gap = false;
+ }
+
+ sample = ev.pulse ? LIRC_PULSE(ev.duration / 1000) :
+ LIRC_SPACE(ev.duration / 1000);
+ }
+
+ lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+ (unsigned char *) &sample);
+ wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
+
+ return 0;
+}
+
+static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
+ size_t n, loff_t *ppos)
+{
+ struct lirc_codec *lirc;
+ struct ir_input_dev *ir_dev;
+ int *txbuf; /* buffer with values to transmit */
+ int ret = 0, count;
+
+ lirc = lirc_get_pdata(file);
+ if (!lirc)
+ return -EFAULT;
+
+ if (n % sizeof(int))
+ return -EINVAL;
+
+ count = n / sizeof(int);
+ if (count > LIRCBUF_SIZE || count % 2 == 0)
+ return -EINVAL;
+
+ txbuf = memdup_user(buf, n);
+ if (IS_ERR(txbuf))
+ return PTR_ERR(txbuf);
+
+ ir_dev = lirc->ir_dev;
+ if (!ir_dev) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ if (ir_dev->props && ir_dev->props->tx_ir)
+ ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
+
+out:
+ kfree(txbuf);
+ return ret;
+}
+
+static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
+ unsigned long __user arg)
+{
+ struct lirc_codec *lirc;
+ struct ir_input_dev *ir_dev;
+ int ret = 0;
+ void *drv_data;
+ __u32 val = 0, tmp;
+
+ lirc = lirc_get_pdata(filep);
+ if (!lirc)
+ return -EFAULT;
+
+ ir_dev = lirc->ir_dev;
+ if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
+ return -EFAULT;
+
+ drv_data = ir_dev->props->priv;
+
+ if (_IOC_DIR(cmd) & _IOC_WRITE) {
+ ret = get_user(val, (__u32 *)arg);
+ if (ret)
+ return ret;
+ }
+
+ switch (cmd) {
+
+ /* legacy support */
+ case LIRC_GET_SEND_MODE:
+ val = LIRC_CAN_SEND_PULSE & LIRC_CAN_SEND_MASK;
+ break;
+
+ case LIRC_SET_SEND_MODE:
+ if (val != (LIRC_MODE_PULSE & LIRC_CAN_SEND_MASK))
+ return -EINVAL;
+ return 0;
+
+ /* TX settings */
+ case LIRC_SET_TRANSMITTER_MASK:
+ if (!ir_dev->props->s_tx_mask)
+ return -EINVAL;
+
+ return ir_dev->props->s_tx_mask(drv_data, val);
+
+ case LIRC_SET_SEND_CARRIER:
+ if (!ir_dev->props->s_tx_carrier)
+ return -EINVAL;
+
+ return ir_dev->props->s_tx_carrier(drv_data, val);
+
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ if (!ir_dev->props->s_tx_duty_cycle)
+ return -ENOSYS;
+
+ if (val <= 0 || val >= 100)
+ return -EINVAL;
+
+ return ir_dev->props->s_tx_duty_cycle(drv_data, val);
+
+ /* RX settings */
+ case LIRC_SET_REC_CARRIER:
+ if (!ir_dev->props->s_rx_carrier_range)
+ return -ENOSYS;
+
+ if (val <= 0)
+ return -EINVAL;
+
+ return ir_dev->props->s_rx_carrier_range(drv_data,
+ ir_dev->raw->lirc.carrier_low, val);
+
+ case LIRC_SET_REC_CARRIER_RANGE:
+ if (val <= 0)
+ return -EINVAL;
+
+ ir_dev->raw->lirc.carrier_low = val;
+ return 0;
+
+ case LIRC_GET_REC_RESOLUTION:
+ val = ir_dev->props->rx_resolution;
+ break;
+
+ case LIRC_SET_WIDEBAND_RECEIVER:
+ if (!ir_dev->props->s_learning_mode)
+ return -ENOSYS;
+
+ return ir_dev->props->s_learning_mode(drv_data, !!val);
+
+ case LIRC_SET_MEASURE_CARRIER_MODE:
+ if (!ir_dev->props->s_carrier_report)
+ return -ENOSYS;
+
+ return ir_dev->props->s_carrier_report(drv_data, !!val);
+
+ /* Generic timeout support */
+ case LIRC_GET_MIN_TIMEOUT:
+ if (!ir_dev->props->max_timeout)
+ return -ENOSYS;
+ val = ir_dev->props->min_timeout / 1000;
+ break;
+
+ case LIRC_GET_MAX_TIMEOUT:
+ if (!ir_dev->props->max_timeout)
+ return -ENOSYS;
+ val = ir_dev->props->max_timeout / 1000;
+ break;
+
+ case LIRC_SET_REC_TIMEOUT:
+ if (!ir_dev->props->max_timeout)
+ return -ENOSYS;
+
+ tmp = val * 1000;
+
+ if (tmp < ir_dev->props->min_timeout ||
+ tmp > ir_dev->props->max_timeout)
+ return -EINVAL;
+
+ ir_dev->props->timeout = tmp;
+ break;
+
+ case LIRC_SET_REC_TIMEOUT_REPORTS:
+ lirc->send_timeout_reports = !!val;
+ break;
+
+ default:
+ return lirc_dev_fop_ioctl(filep, cmd, arg);
+ }
+
+ if (_IOC_DIR(cmd) & _IOC_READ)
+ ret = put_user(val, (__u32 *)arg);
+
+ return ret;
+}
+
+static int ir_lirc_open(void *data)
+{
+ return 0;
+}
+
+static void ir_lirc_close(void *data)
+{
+ return;
+}
+
+static struct file_operations lirc_fops = {
+ .owner = THIS_MODULE,
+ .write = ir_lirc_transmit_ir,
+ .unlocked_ioctl = ir_lirc_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = ir_lirc_ioctl,
+#endif
+ .read = lirc_dev_fop_read,
+ .poll = lirc_dev_fop_poll,
+ .open = lirc_dev_fop_open,
+ .release = lirc_dev_fop_close,
+ .llseek = no_llseek,
+};
+
+static int ir_lirc_register(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct lirc_driver *drv;
+ struct lirc_buffer *rbuf;
+ int rc = -ENOMEM;
+ unsigned long features;
+
+ drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+ if (!drv)
+ return rc;
+
+ rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+ if (!rbuf)
+ goto rbuf_alloc_failed;
+
+ rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE);
+ if (rc)
+ goto rbuf_init_failed;
+
+ features = LIRC_CAN_REC_MODE2;
+ if (ir_dev->props->tx_ir) {
+
+ features |= LIRC_CAN_SEND_PULSE;
+ if (ir_dev->props->s_tx_mask)
+ features |= LIRC_CAN_SET_TRANSMITTER_MASK;
+ if (ir_dev->props->s_tx_carrier)
+ features |= LIRC_CAN_SET_SEND_CARRIER;
+
+ if (ir_dev->props->s_tx_duty_cycle)
+ features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
+ }
+
+ if (ir_dev->props->s_rx_carrier_range)
+ features |= LIRC_CAN_SET_REC_CARRIER |
+ LIRC_CAN_SET_REC_CARRIER_RANGE;
+
+ if (ir_dev->props->s_learning_mode)
+ features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
+
+ if (ir_dev->props->s_carrier_report)
+ features |= LIRC_CAN_MEASURE_CARRIER;
+
+
+ if (ir_dev->props->max_timeout)
+ features |= LIRC_CAN_SET_REC_TIMEOUT;
+
+
+ snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
+ ir_dev->driver_name);
+ drv->minor = -1;
+ drv->features = features;
+ drv->data = &ir_dev->raw->lirc;
+ drv->rbuf = rbuf;
+ drv->set_use_inc = &ir_lirc_open;
+ drv->set_use_dec = &ir_lirc_close;
+ drv->code_length = sizeof(struct ir_raw_event) * 8;
+ drv->fops = &lirc_fops;
+ drv->dev = &ir_dev->dev;
+ drv->owner = THIS_MODULE;
+
+ drv->minor = lirc_register_driver(drv);
+ if (drv->minor < 0) {
+ rc = -ENODEV;
+ goto lirc_register_failed;
+ }
+
+ ir_dev->raw->lirc.drv = drv;
+ ir_dev->raw->lirc.ir_dev = ir_dev;
+ return 0;
+
+lirc_register_failed:
+rbuf_init_failed:
+ kfree(rbuf);
+rbuf_alloc_failed:
+ kfree(drv);
+
+ return rc;
+}
+
+static int ir_lirc_unregister(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct lirc_codec *lirc = &ir_dev->raw->lirc;
+
+ lirc_unregister_driver(lirc->drv->minor);
+ lirc_buffer_free(lirc->drv->rbuf);
+ kfree(lirc->drv);
+
+ return 0;
+}
+
+static struct ir_raw_handler lirc_handler = {
+ .protocols = IR_TYPE_LIRC,
+ .decode = ir_lirc_decode,
+ .raw_register = ir_lirc_register,
+ .raw_unregister = ir_lirc_unregister,
+};
+
+static int __init ir_lirc_codec_init(void)
+{
+ ir_raw_handler_register(&lirc_handler);
+
+ printk(KERN_INFO "IR LIRC bridge handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_lirc_codec_exit(void)
+{
+ ir_raw_handler_unregister(&lirc_handler);
+}
+
+module_init(ir_lirc_codec_init);
+module_exit(ir_lirc_codec_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("LIRC IR handler bridge");
--- /dev/null
+/* ir-nec-decoder.c - handle NEC IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitrev.h>
+#include "ir-core-priv.h"
+
+#define NEC_NBITS 32
+#define NEC_UNIT 562500 /* ns */
+#define NEC_HEADER_PULSE (16 * NEC_UNIT)
+#define NECX_HEADER_PULSE (8 * NEC_UNIT) /* Less common NEC variant */
+#define NEC_HEADER_SPACE (8 * NEC_UNIT)
+#define NEC_REPEAT_SPACE (4 * NEC_UNIT)
+#define NEC_BIT_PULSE (1 * NEC_UNIT)
+#define NEC_BIT_0_SPACE (1 * NEC_UNIT)
+#define NEC_BIT_1_SPACE (3 * NEC_UNIT)
+#define NEC_TRAILER_PULSE (1 * NEC_UNIT)
+#define NEC_TRAILER_SPACE (10 * NEC_UNIT) /* even longer in reality */
+#define NECX_REPEAT_BITS 1
+
+enum nec_state {
+ STATE_INACTIVE,
+ STATE_HEADER_SPACE,
+ STATE_BIT_PULSE,
+ STATE_BIT_SPACE,
+ STATE_TRAILER_PULSE,
+ STATE_TRAILER_SPACE,
+};
+
+/**
+ * ir_nec_decode() - Decode one NEC pulse or space
+ * @input_dev: the struct input_dev descriptor of the device
+ * @duration: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct nec_dec *data = &ir_dev->raw->nec;
+ u32 scancode;
+ u8 address, not_address, command, not_command;
+
+ if (!(ir_dev->raw->enabled_protocols & IR_TYPE_NEC))
+ return 0;
+
+ if (!is_timing_event(ev)) {
+ if (ev.reset)
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+ IR_dprintk(2, "NEC decode started at state %d (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+ switch (data->state) {
+
+ case STATE_INACTIVE:
+ if (!ev.pulse)
+ break;
+
+ if (eq_margin(ev.duration, NEC_HEADER_PULSE, NEC_UNIT / 2)) {
+ data->is_nec_x = false;
+ data->necx_repeat = false;
+ } else if (eq_margin(ev.duration, NECX_HEADER_PULSE, NEC_UNIT / 2))
+ data->is_nec_x = true;
+ else
+ break;
+
+ data->count = 0;
+ data->state = STATE_HEADER_SPACE;
+ return 0;
+
+ case STATE_HEADER_SPACE:
+ if (ev.pulse)
+ break;
+
+ if (eq_margin(ev.duration, NEC_HEADER_SPACE, NEC_UNIT / 2)) {
+ data->state = STATE_BIT_PULSE;
+ return 0;
+ } else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
+ ir_repeat(input_dev);
+ IR_dprintk(1, "Repeat last key\n");
+ data->state = STATE_TRAILER_PULSE;
+ return 0;
+ }
+
+ break;
+
+ case STATE_BIT_PULSE:
+ if (!ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, NEC_BIT_PULSE, NEC_UNIT / 2))
+ break;
+
+ data->state = STATE_BIT_SPACE;
+ return 0;
+
+ case STATE_BIT_SPACE:
+ if (ev.pulse)
+ break;
+
+ if (data->necx_repeat && data->count == NECX_REPEAT_BITS &&
+ geq_margin(ev.duration,
+ NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
+ IR_dprintk(1, "Repeat last key\n");
+ ir_repeat(input_dev);
+ data->state = STATE_INACTIVE;
+ return 0;
+
+ } else if (data->count > NECX_REPEAT_BITS)
+ data->necx_repeat = false;
+
+ data->bits <<= 1;
+ if (eq_margin(ev.duration, NEC_BIT_1_SPACE, NEC_UNIT / 2))
+ data->bits |= 1;
+ else if (!eq_margin(ev.duration, NEC_BIT_0_SPACE, NEC_UNIT / 2))
+ break;
+ data->count++;
+
+ if (data->count == NEC_NBITS)
+ data->state = STATE_TRAILER_PULSE;
+ else
+ data->state = STATE_BIT_PULSE;
+
+ return 0;
+
+ case STATE_TRAILER_PULSE:
+ if (!ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, NEC_TRAILER_PULSE, NEC_UNIT / 2))
+ break;
+
+ data->state = STATE_TRAILER_SPACE;
+ return 0;
+
+ case STATE_TRAILER_SPACE:
+ if (ev.pulse)
+ break;
+
+ if (!geq_margin(ev.duration, NEC_TRAILER_SPACE, NEC_UNIT / 2))
+ break;
+
+ address = bitrev8((data->bits >> 24) & 0xff);
+ not_address = bitrev8((data->bits >> 16) & 0xff);
+ command = bitrev8((data->bits >> 8) & 0xff);
+ not_command = bitrev8((data->bits >> 0) & 0xff);
+
+ if ((command ^ not_command) != 0xff) {
+ IR_dprintk(1, "NEC checksum error: received 0x%08x\n",
+ data->bits);
+ break;
+ }
+
+ if ((address ^ not_address) != 0xff) {
+ /* Extended NEC */
+ scancode = address << 16 |
+ not_address << 8 |
+ command;
+ IR_dprintk(1, "NEC (Ext) scancode 0x%06x\n", scancode);
+ } else {
+ /* Normal NEC */
+ scancode = address << 8 | command;
+ IR_dprintk(1, "NEC scancode 0x%04x\n", scancode);
+ }
+
+ if (data->is_nec_x)
+ data->necx_repeat = true;
+
+ ir_keydown(input_dev, scancode, 0);
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+ IR_dprintk(1, "NEC decode failed at state %d (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+ data->state = STATE_INACTIVE;
+ return -EINVAL;
+}
+
+static struct ir_raw_handler nec_handler = {
+ .protocols = IR_TYPE_NEC,
+ .decode = ir_nec_decode,
+};
+
+static int __init ir_nec_decode_init(void)
+{
+ ir_raw_handler_register(&nec_handler);
+
+ printk(KERN_INFO "IR NEC protocol handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_nec_decode_exit(void)
+{
+ ir_raw_handler_unregister(&nec_handler);
+}
+
+module_init(ir_nec_decode_init);
+module_exit(ir_nec_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("NEC IR protocol decoder");
--- /dev/null
+/* ir-raw-event.c - handle IR Pulse/Space event
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/freezer.h>
+#include "ir-core-priv.h"
+
+/* Define the max number of pulse/space transitions to buffer */
+#define MAX_IR_EVENT_SIZE 512
+
+/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
+static LIST_HEAD(ir_raw_client_list);
+
+/* Used to handle IR raw handler extensions */
+static DEFINE_MUTEX(ir_raw_handler_lock);
+static LIST_HEAD(ir_raw_handler_list);
+static u64 available_protocols;
+
+#ifdef MODULE
+/* Used to load the decoders */
+static struct work_struct wq_load;
+#endif
+
+static int ir_raw_event_thread(void *data)
+{
+ struct ir_raw_event ev;
+ struct ir_raw_handler *handler;
+ struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
+ int retval;
+
+ while (!kthread_should_stop()) {
+
+ spin_lock_irq(&raw->lock);
+ retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
+
+ if (!retval) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (kthread_should_stop())
+ set_current_state(TASK_RUNNING);
+
+ spin_unlock_irq(&raw->lock);
+ schedule();
+ continue;
+ }
+
+ spin_unlock_irq(&raw->lock);
+
+
+ BUG_ON(retval != sizeof(ev));
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_for_each_entry(handler, &ir_raw_handler_list, list)
+ handler->decode(raw->input_dev, ev);
+ raw->prev_ev = ev;
+ mutex_unlock(&ir_raw_handler_lock);
+ }
+
+ return 0;
+}
+
+/**
+ * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
+ * @input_dev: the struct input_dev device descriptor
+ * @ev: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This routine (which may be called from an interrupt context) stores a
+ * pulse/space duration for the raw ir decoding state machines. Pulses are
+ * signalled as positive values and spaces as negative values. A zero value
+ * will reset the decoding state machines.
+ */
+int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+
+ if (!ir->raw)
+ return -EINVAL;
+
+ IR_dprintk(2, "sample: (%05dus %s)\n",
+ TO_US(ev->duration), TO_STR(ev->pulse));
+
+ if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
+ return -ENOMEM;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store);
+
+/**
+ * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
+ * @input_dev: the struct input_dev device descriptor
+ * @type: the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) is used to
+ * store the beginning of an ir pulse or space (or the start/end of ir
+ * reception) for the raw ir decoding state machines. This is used by
+ * hardware which does not provide durations directly but only interrupts
+ * (or similar events) on state change.
+ */
+int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ ktime_t now;
+ s64 delta; /* ns */
+ struct ir_raw_event ev;
+ int rc = 0;
+
+ if (!ir->raw)
+ return -EINVAL;
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+ /* Check for a long duration since last event or if we're
+ * being called for the first time, note that delta can't
+ * possibly be negative.
+ */
+ ev.duration = 0;
+ if (delta > IR_MAX_DURATION || !ir->raw->last_type)
+ type |= IR_START_EVENT;
+ else
+ ev.duration = delta;
+
+ if (type & IR_START_EVENT)
+ ir_raw_event_reset(input_dev);
+ else if (ir->raw->last_type & IR_SPACE) {
+ ev.pulse = false;
+ rc = ir_raw_event_store(input_dev, &ev);
+ } else if (ir->raw->last_type & IR_PULSE) {
+ ev.pulse = true;
+ rc = ir_raw_event_store(input_dev, &ev);
+ } else
+ return 0;
+
+ ir->raw->last_event = now;
+ ir->raw->last_type = type;
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
+
+/**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev: the struct input_dev device descriptor
+ * @type: the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+ struct ir_raw_event *ev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+
+ if (!raw || !ir->props)
+ return -EINVAL;
+
+ /* Ignore spaces in idle mode */
+ if (ir->idle && !ev->pulse)
+ return 0;
+ else if (ir->idle)
+ ir_raw_event_set_idle(input_dev, false);
+
+ if (!raw->this_ev.duration) {
+ raw->this_ev = *ev;
+ } else if (ev->pulse == raw->this_ev.pulse) {
+ raw->this_ev.duration += ev->duration;
+ } else {
+ ir_raw_event_store(input_dev, &raw->this_ev);
+ raw->this_ev = *ev;
+ }
+
+ /* Enter idle mode if nessesary */
+ if (!ev->pulse && ir->props->timeout &&
+ raw->this_ev.duration >= ir->props->timeout) {
+ ir_raw_event_set_idle(input_dev, true);
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+/**
+ * ir_raw_event_set_idle() - hint the ir core if device is receiving
+ * IR data or not
+ * @input_dev: the struct input_dev device descriptor
+ * @idle: the hint value
+ */
+void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_event_ctrl *raw = ir->raw;
+
+ if (!ir->props || !ir->raw)
+ return;
+
+ IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
+
+ if (idle) {
+ raw->this_ev.timeout = true;
+ ir_raw_event_store(input_dev, &raw->this_ev);
+ init_ir_raw_event(&raw->this_ev);
+ }
+
+ if (ir->props->s_idle)
+ ir->props->s_idle(ir->props->priv, idle);
+ ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
+ * ir_raw_event_handle() - schedules the decoding of stored ir data
+ * @input_dev: the struct input_dev device descriptor
+ *
+ * This routine will signal the workqueue to start decoding stored ir data.
+ */
+void ir_raw_event_handle(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ unsigned long flags;
+
+ if (!ir->raw)
+ return;
+
+ spin_lock_irqsave(&ir->raw->lock, flags);
+ wake_up_process(ir->raw->thread);
+ spin_unlock_irqrestore(&ir->raw->lock, flags);
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_handle);
+
+/* used internally by the sysfs interface */
+u64
+ir_raw_get_allowed_protocols()
+{
+ u64 protocols;
+ mutex_lock(&ir_raw_handler_lock);
+ protocols = available_protocols;
+ mutex_unlock(&ir_raw_handler_lock);
+ return protocols;
+}
+
+/*
+ * Used to (un)register raw event clients
+ */
+int ir_raw_event_register(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ int rc;
+ struct ir_raw_handler *handler;
+
+ ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
+ if (!ir->raw)
+ return -ENOMEM;
+
+ ir->raw->input_dev = input_dev;
+
+ ir->raw->enabled_protocols = ~0;
+ rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
+ GFP_KERNEL);
+ if (rc < 0) {
+ kfree(ir->raw);
+ ir->raw = NULL;
+ return rc;
+ }
+
+ spin_lock_init(&ir->raw->lock);
+ ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
+ "rc%u", (unsigned int)ir->devno);
+
+ if (IS_ERR(ir->raw->thread)) {
+ int ret = PTR_ERR(ir->raw->thread);
+
+ kfree(ir->raw);
+ ir->raw = NULL;
+ return ret;
+ }
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_add_tail(&ir->raw->list, &ir_raw_client_list);
+ list_for_each_entry(handler, &ir_raw_handler_list, list)
+ if (handler->raw_register)
+ handler->raw_register(ir->raw->input_dev);
+ mutex_unlock(&ir_raw_handler_lock);
+
+ return 0;
+}
+
+void ir_raw_event_unregister(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir = input_get_drvdata(input_dev);
+ struct ir_raw_handler *handler;
+
+ if (!ir->raw)
+ return;
+
+ kthread_stop(ir->raw->thread);
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_del(&ir->raw->list);
+ list_for_each_entry(handler, &ir_raw_handler_list, list)
+ if (handler->raw_unregister)
+ handler->raw_unregister(ir->raw->input_dev);
+ mutex_unlock(&ir_raw_handler_lock);
+
+ kfifo_free(&ir->raw->kfifo);
+ kfree(ir->raw);
+ ir->raw = NULL;
+}
+
+/*
+ * Extension interface - used to register the IR decoders
+ */
+
+int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
+{
+ struct ir_raw_event_ctrl *raw;
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
+ if (ir_raw_handler->raw_register)
+ list_for_each_entry(raw, &ir_raw_client_list, list)
+ ir_raw_handler->raw_register(raw->input_dev);
+ available_protocols |= ir_raw_handler->protocols;
+ mutex_unlock(&ir_raw_handler_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(ir_raw_handler_register);
+
+void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
+{
+ struct ir_raw_event_ctrl *raw;
+
+ mutex_lock(&ir_raw_handler_lock);
+ list_del(&ir_raw_handler->list);
+ if (ir_raw_handler->raw_unregister)
+ list_for_each_entry(raw, &ir_raw_client_list, list)
+ ir_raw_handler->raw_unregister(raw->input_dev);
+ available_protocols &= ~ir_raw_handler->protocols;
+ mutex_unlock(&ir_raw_handler_lock);
+}
+EXPORT_SYMBOL(ir_raw_handler_unregister);
+
+#ifdef MODULE
+static void init_decoders(struct work_struct *work)
+{
+ /* Load the decoder modules */
+
+ load_nec_decode();
+ load_rc5_decode();
+ load_rc6_decode();
+ load_jvc_decode();
+ load_sony_decode();
+ load_lirc_codec();
+
+ /* If needed, we may later add some init code. In this case,
+ it is needed to change the CONFIG_MODULE test at ir-core.h
+ */
+}
+#endif
+
+void ir_raw_init(void)
+{
+#ifdef MODULE
+ INIT_WORK(&wq_load, init_decoders);
+ schedule_work(&wq_load);
+#endif
+}
--- /dev/null
+/* ir-rc5-decoder.c - handle RC5(x) IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This code handles 14 bits RC5 protocols and 20 bits RC5x protocols.
+ * There are other variants that use a different number of bits.
+ * This is currently unsupported.
+ * It considers a carrier of 36 kHz, with a total of 14/20 bits, where
+ * the first two bits are start bits, and a third one is a filing bit
+ */
+
+#include "ir-core-priv.h"
+
+#define RC5_NBITS 14
+#define RC5X_NBITS 20
+#define CHECK_RC5X_NBITS 8
+#define RC5_UNIT 888888 /* ns */
+#define RC5_BIT_START (1 * RC5_UNIT)
+#define RC5_BIT_END (1 * RC5_UNIT)
+#define RC5X_SPACE (4 * RC5_UNIT)
+
+enum rc5_state {
+ STATE_INACTIVE,
+ STATE_BIT_START,
+ STATE_BIT_END,
+ STATE_CHECK_RC5X,
+ STATE_FINISHED,
+};
+
+/**
+ * ir_rc5_decode() - Decode one RC-5 pulse or space
+ * @input_dev: the struct input_dev descriptor of the device
+ * @ev: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct rc5_dec *data = &ir_dev->raw->rc5;
+ u8 toggle;
+ u32 scancode;
+
+ if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5))
+ return 0;
+
+ if (!is_timing_event(ev)) {
+ if (ev.reset)
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+ if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
+ goto out;
+
+again:
+ IR_dprintk(2, "RC5(x) decode started at state %i (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+ if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
+ return 0;
+
+ switch (data->state) {
+
+ case STATE_INACTIVE:
+ if (!ev.pulse)
+ break;
+
+ data->state = STATE_BIT_START;
+ data->count = 1;
+ /* We just need enough bits to get to STATE_CHECK_RC5X */
+ data->wanted_bits = RC5X_NBITS;
+ decrease_duration(&ev, RC5_BIT_START);
+ goto again;
+
+ case STATE_BIT_START:
+ if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
+ break;
+
+ data->bits <<= 1;
+ if (!ev.pulse)
+ data->bits |= 1;
+ data->count++;
+ data->state = STATE_BIT_END;
+ return 0;
+
+ case STATE_BIT_END:
+ if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+ break;
+
+ if (data->count == data->wanted_bits)
+ data->state = STATE_FINISHED;
+ else if (data->count == CHECK_RC5X_NBITS)
+ data->state = STATE_CHECK_RC5X;
+ else
+ data->state = STATE_BIT_START;
+
+ decrease_duration(&ev, RC5_BIT_END);
+ goto again;
+
+ case STATE_CHECK_RC5X:
+ if (!ev.pulse && geq_margin(ev.duration, RC5X_SPACE, RC5_UNIT / 2)) {
+ /* RC5X */
+ data->wanted_bits = RC5X_NBITS;
+ decrease_duration(&ev, RC5X_SPACE);
+ } else {
+ /* RC5 */
+ data->wanted_bits = RC5_NBITS;
+ }
+ data->state = STATE_BIT_START;
+ goto again;
+
+ case STATE_FINISHED:
+ if (ev.pulse)
+ break;
+
+ if (data->wanted_bits == RC5X_NBITS) {
+ /* RC5X */
+ u8 xdata, command, system;
+ xdata = (data->bits & 0x0003F) >> 0;
+ command = (data->bits & 0x00FC0) >> 6;
+ system = (data->bits & 0x1F000) >> 12;
+ toggle = (data->bits & 0x20000) ? 1 : 0;
+ command += (data->bits & 0x01000) ? 0 : 0x40;
+ scancode = system << 16 | command << 8 | xdata;
+
+ IR_dprintk(1, "RC5X scancode 0x%06x (toggle: %u)\n",
+ scancode, toggle);
+
+ } else {
+ /* RC5 */
+ u8 command, system;
+ command = (data->bits & 0x0003F) >> 0;
+ system = (data->bits & 0x007C0) >> 6;
+ toggle = (data->bits & 0x00800) ? 1 : 0;
+ command += (data->bits & 0x01000) ? 0 : 0x40;
+ scancode = system << 8 | command;
+
+ IR_dprintk(1, "RC5 scancode 0x%04x (toggle: %u)\n",
+ scancode, toggle);
+ }
+
+ ir_keydown(input_dev, scancode, toggle);
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+out:
+ IR_dprintk(1, "RC5(x) decode failed at state %i (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+ data->state = STATE_INACTIVE;
+ return -EINVAL;
+}
+
+static struct ir_raw_handler rc5_handler = {
+ .protocols = IR_TYPE_RC5,
+ .decode = ir_rc5_decode,
+};
+
+static int __init ir_rc5_decode_init(void)
+{
+ ir_raw_handler_register(&rc5_handler);
+
+ printk(KERN_INFO "IR RC5(x) protocol handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_rc5_decode_exit(void)
+{
+ ir_raw_handler_unregister(&rc5_handler);
+}
+
+module_init(ir_rc5_decode_init);
+module_exit(ir_rc5_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("RC5(x) IR protocol decoder");
--- /dev/null
+/* ir-rc5-sz-decoder.c - handle RC5 Streamzap IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (C) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This code handles the 15 bit RC5-ish protocol used by the Streamzap
+ * PC Remote.
+ * It considers a carrier of 36 kHz, with a total of 15 bits, where
+ * the first two bits are start bits, and a third one is a filing bit
+ */
+
+#include "ir-core-priv.h"
+
+#define RC5_SZ_NBITS 15
+#define RC5_UNIT 888888 /* ns */
+#define RC5_BIT_START (1 * RC5_UNIT)
+#define RC5_BIT_END (1 * RC5_UNIT)
+
+enum rc5_sz_state {
+ STATE_INACTIVE,
+ STATE_BIT_START,
+ STATE_BIT_END,
+ STATE_FINISHED,
+};
+
+/**
+ * ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space
+ * @input_dev: the struct input_dev descriptor of the device
+ * @ev: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_rc5_sz_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct rc5_sz_dec *data = &ir_dev->raw->rc5_sz;
+ u8 toggle, command, system;
+ u32 scancode;
+
+ if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
+ return 0;
+
+ if (!is_timing_event(ev)) {
+ if (ev.reset)
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+ if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
+ goto out;
+
+again:
+ IR_dprintk(2, "RC5-sz decode started at state %i (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+ if (!geq_margin(ev.duration, RC5_UNIT, RC5_UNIT / 2))
+ return 0;
+
+ switch (data->state) {
+
+ case STATE_INACTIVE:
+ if (!ev.pulse)
+ break;
+
+ data->state = STATE_BIT_START;
+ data->count = 1;
+ data->wanted_bits = RC5_SZ_NBITS;
+ decrease_duration(&ev, RC5_BIT_START);
+ goto again;
+
+ case STATE_BIT_START:
+ if (!eq_margin(ev.duration, RC5_BIT_START, RC5_UNIT / 2))
+ break;
+
+ data->bits <<= 1;
+ if (!ev.pulse)
+ data->bits |= 1;
+ data->count++;
+ data->state = STATE_BIT_END;
+ return 0;
+
+ case STATE_BIT_END:
+ if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+ break;
+
+ if (data->count == data->wanted_bits)
+ data->state = STATE_FINISHED;
+ else
+ data->state = STATE_BIT_START;
+
+ decrease_duration(&ev, RC5_BIT_END);
+ goto again;
+
+ case STATE_FINISHED:
+ if (ev.pulse)
+ break;
+
+ /* RC5-sz */
+ command = (data->bits & 0x0003F) >> 0;
+ system = (data->bits & 0x02FC0) >> 6;
+ toggle = (data->bits & 0x01000) ? 1 : 0;
+ scancode = system << 6 | command;
+
+ IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
+ scancode, toggle);
+
+ ir_keydown(input_dev, scancode, toggle);
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+out:
+ IR_dprintk(1, "RC5-sz decode failed at state %i (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+ data->state = STATE_INACTIVE;
+ return -EINVAL;
+}
+
+static struct ir_raw_handler rc5_sz_handler = {
+ .protocols = IR_TYPE_RC5_SZ,
+ .decode = ir_rc5_sz_decode,
+};
+
+static int __init ir_rc5_sz_decode_init(void)
+{
+ ir_raw_handler_register(&rc5_sz_handler);
+
+ printk(KERN_INFO "IR RC5 (streamzap) protocol handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_rc5_sz_decode_exit(void)
+{
+ ir_raw_handler_unregister(&rc5_sz_handler);
+}
+
+module_init(ir_rc5_sz_decode_init);
+module_exit(ir_rc5_sz_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("RC5 (streamzap) IR protocol decoder");
--- /dev/null
+/* ir-rc6-decoder.c - A decoder for the RC6 IR protocol
+ *
+ * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "ir-core-priv.h"
+
+/*
+ * This decoder currently supports:
+ * RC6-0-16 (standard toggle bit in header)
+ * RC6-6A-24 (no toggle bit)
+ * RC6-6A-32 (MCE version with toggle bit in body)
+ */
+
+#define RC6_UNIT 444444 /* us */
+#define RC6_HEADER_NBITS 4 /* not including toggle bit */
+#define RC6_0_NBITS 16
+#define RC6_6A_SMALL_NBITS 24
+#define RC6_6A_LARGE_NBITS 32
+#define RC6_PREFIX_PULSE (6 * RC6_UNIT)
+#define RC6_PREFIX_SPACE (2 * RC6_UNIT)
+#define RC6_BIT_START (1 * RC6_UNIT)
+#define RC6_BIT_END (1 * RC6_UNIT)
+#define RC6_TOGGLE_START (2 * RC6_UNIT)
+#define RC6_TOGGLE_END (2 * RC6_UNIT)
+#define RC6_MODE_MASK 0x07 /* for the header bits */
+#define RC6_STARTBIT_MASK 0x08 /* for the header bits */
+#define RC6_6A_MCE_TOGGLE_MASK 0x8000 /* for the body bits */
+
+enum rc6_mode {
+ RC6_MODE_0,
+ RC6_MODE_6A,
+ RC6_MODE_UNKNOWN,
+};
+
+enum rc6_state {
+ STATE_INACTIVE,
+ STATE_PREFIX_SPACE,
+ STATE_HEADER_BIT_START,
+ STATE_HEADER_BIT_END,
+ STATE_TOGGLE_START,
+ STATE_TOGGLE_END,
+ STATE_BODY_BIT_START,
+ STATE_BODY_BIT_END,
+ STATE_FINISHED,
+};
+
+static enum rc6_mode rc6_mode(struct rc6_dec *data)
+{
+ switch (data->header & RC6_MODE_MASK) {
+ case 0:
+ return RC6_MODE_0;
+ case 6:
+ if (!data->toggle)
+ return RC6_MODE_6A;
+ /* fall through */
+ default:
+ return RC6_MODE_UNKNOWN;
+ }
+}
+
+/**
+ * ir_rc6_decode() - Decode one RC6 pulse or space
+ * @input_dev: the struct input_dev descriptor of the device
+ * @ev: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct rc6_dec *data = &ir_dev->raw->rc6;
+ u32 scancode;
+ u8 toggle;
+
+ if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
+ return 0;
+
+ if (!is_timing_event(ev)) {
+ if (ev.reset)
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+ if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
+ goto out;
+
+again:
+ IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+ if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
+ return 0;
+
+ switch (data->state) {
+
+ case STATE_INACTIVE:
+ if (!ev.pulse)
+ break;
+
+ /* Note: larger margin on first pulse since each RC6_UNIT
+ is quite short and some hardware takes some time to
+ adjust to the signal */
+ if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT))
+ break;
+
+ data->state = STATE_PREFIX_SPACE;
+ data->count = 0;
+ return 0;
+
+ case STATE_PREFIX_SPACE:
+ if (ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2))
+ break;
+
+ data->state = STATE_HEADER_BIT_START;
+ return 0;
+
+ case STATE_HEADER_BIT_START:
+ if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
+ break;
+
+ data->header <<= 1;
+ if (ev.pulse)
+ data->header |= 1;
+ data->count++;
+ data->state = STATE_HEADER_BIT_END;
+ return 0;
+
+ case STATE_HEADER_BIT_END:
+ if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+ break;
+
+ if (data->count == RC6_HEADER_NBITS)
+ data->state = STATE_TOGGLE_START;
+ else
+ data->state = STATE_HEADER_BIT_START;
+
+ decrease_duration(&ev, RC6_BIT_END);
+ goto again;
+
+ case STATE_TOGGLE_START:
+ if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
+ break;
+
+ data->toggle = ev.pulse;
+ data->state = STATE_TOGGLE_END;
+ return 0;
+
+ case STATE_TOGGLE_END:
+ if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
+ !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
+ break;
+
+ if (!(data->header & RC6_STARTBIT_MASK)) {
+ IR_dprintk(1, "RC6 invalid start bit\n");
+ break;
+ }
+
+ data->state = STATE_BODY_BIT_START;
+ decrease_duration(&ev, RC6_TOGGLE_END);
+ data->count = 0;
+
+ switch (rc6_mode(data)) {
+ case RC6_MODE_0:
+ data->wanted_bits = RC6_0_NBITS;
+ break;
+ case RC6_MODE_6A:
+ /* This might look weird, but we basically
+ check the value of the first body bit to
+ determine the number of bits in mode 6A */
+ if ((!ev.pulse && !geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) ||
+ geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
+ data->wanted_bits = RC6_6A_LARGE_NBITS;
+ else
+ data->wanted_bits = RC6_6A_SMALL_NBITS;
+ break;
+ default:
+ IR_dprintk(1, "RC6 unknown mode\n");
+ goto out;
+ }
+ goto again;
+
+ case STATE_BODY_BIT_START:
+ if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
+ break;
+
+ data->body <<= 1;
+ if (ev.pulse)
+ data->body |= 1;
+ data->count++;
+ data->state = STATE_BODY_BIT_END;
+ return 0;
+
+ case STATE_BODY_BIT_END:
+ if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+ break;
+
+ if (data->count == data->wanted_bits)
+ data->state = STATE_FINISHED;
+ else
+ data->state = STATE_BODY_BIT_START;
+
+ decrease_duration(&ev, RC6_BIT_END);
+ goto again;
+
+ case STATE_FINISHED:
+ if (ev.pulse)
+ break;
+
+ switch (rc6_mode(data)) {
+ case RC6_MODE_0:
+ scancode = data->body & 0xffff;
+ toggle = data->toggle;
+ IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
+ scancode, toggle);
+ break;
+ case RC6_MODE_6A:
+ if (data->wanted_bits == RC6_6A_LARGE_NBITS) {
+ toggle = data->body & RC6_6A_MCE_TOGGLE_MASK ? 1 : 0;
+ scancode = data->body & ~RC6_6A_MCE_TOGGLE_MASK;
+ } else {
+ toggle = 0;
+ scancode = data->body & 0xffffff;
+ }
+
+ IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
+ scancode, toggle);
+ break;
+ default:
+ IR_dprintk(1, "RC6 unknown mode\n");
+ goto out;
+ }
+
+ ir_keydown(input_dev, scancode, toggle);
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+out:
+ IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+ data->state = STATE_INACTIVE;
+ return -EINVAL;
+}
+
+static struct ir_raw_handler rc6_handler = {
+ .protocols = IR_TYPE_RC6,
+ .decode = ir_rc6_decode,
+};
+
+static int __init ir_rc6_decode_init(void)
+{
+ ir_raw_handler_register(&rc6_handler);
+
+ printk(KERN_INFO "IR RC6 protocol handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_rc6_decode_exit(void)
+{
+ ir_raw_handler_unregister(&rc6_handler);
+}
+
+module_init(ir_rc6_decode_init);
+module_exit(ir_rc6_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("RC6 IR protocol decoder");
--- /dev/null
+/* ir-sony-decoder.c - handle Sony IR Pulse/Space protocol
+ *
+ * Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitrev.h>
+#include "ir-core-priv.h"
+
+#define SONY_UNIT 600000 /* ns */
+#define SONY_HEADER_PULSE (4 * SONY_UNIT)
+#define SONY_HEADER_SPACE (1 * SONY_UNIT)
+#define SONY_BIT_0_PULSE (1 * SONY_UNIT)
+#define SONY_BIT_1_PULSE (2 * SONY_UNIT)
+#define SONY_BIT_SPACE (1 * SONY_UNIT)
+#define SONY_TRAILER_SPACE (10 * SONY_UNIT) /* minimum */
+
+enum sony_state {
+ STATE_INACTIVE,
+ STATE_HEADER_SPACE,
+ STATE_BIT_PULSE,
+ STATE_BIT_SPACE,
+ STATE_FINISHED,
+};
+
+/**
+ * ir_sony_decode() - Decode one Sony pulse or space
+ * @input_dev: the struct input_dev descriptor of the device
+ * @ev: the struct ir_raw_event descriptor of the pulse/space
+ *
+ * This function returns -EINVAL if the pulse violates the state machine
+ */
+static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ struct sony_dec *data = &ir_dev->raw->sony;
+ u32 scancode;
+ u8 device, subdevice, function;
+
+ if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
+ return 0;
+
+ if (!is_timing_event(ev)) {
+ if (ev.reset)
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+ if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2))
+ goto out;
+
+ IR_dprintk(2, "Sony decode started at state %d (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+
+ switch (data->state) {
+
+ case STATE_INACTIVE:
+ if (!ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, SONY_HEADER_PULSE, SONY_UNIT / 2))
+ break;
+
+ data->count = 0;
+ data->state = STATE_HEADER_SPACE;
+ return 0;
+
+ case STATE_HEADER_SPACE:
+ if (ev.pulse)
+ break;
+
+ if (!eq_margin(ev.duration, SONY_HEADER_SPACE, SONY_UNIT / 2))
+ break;
+
+ data->state = STATE_BIT_PULSE;
+ return 0;
+
+ case STATE_BIT_PULSE:
+ if (!ev.pulse)
+ break;
+
+ data->bits <<= 1;
+ if (eq_margin(ev.duration, SONY_BIT_1_PULSE, SONY_UNIT / 2))
+ data->bits |= 1;
+ else if (!eq_margin(ev.duration, SONY_BIT_0_PULSE, SONY_UNIT / 2))
+ break;
+
+ data->count++;
+ data->state = STATE_BIT_SPACE;
+ return 0;
+
+ case STATE_BIT_SPACE:
+ if (ev.pulse)
+ break;
+
+ if (!geq_margin(ev.duration, SONY_BIT_SPACE, SONY_UNIT / 2))
+ break;
+
+ decrease_duration(&ev, SONY_BIT_SPACE);
+
+ if (!geq_margin(ev.duration, SONY_UNIT, SONY_UNIT / 2)) {
+ data->state = STATE_BIT_PULSE;
+ return 0;
+ }
+
+ data->state = STATE_FINISHED;
+ /* Fall through */
+
+ case STATE_FINISHED:
+ if (ev.pulse)
+ break;
+
+ if (!geq_margin(ev.duration, SONY_TRAILER_SPACE, SONY_UNIT / 2))
+ break;
+
+ switch (data->count) {
+ case 12:
+ device = bitrev8((data->bits << 3) & 0xF8);
+ subdevice = 0;
+ function = bitrev8((data->bits >> 4) & 0xFE);
+ break;
+ case 15:
+ device = bitrev8((data->bits >> 0) & 0xFF);
+ subdevice = 0;
+ function = bitrev8((data->bits >> 7) & 0xFD);
+ break;
+ case 20:
+ device = bitrev8((data->bits >> 5) & 0xF8);
+ subdevice = bitrev8((data->bits >> 0) & 0xFF);
+ function = bitrev8((data->bits >> 12) & 0xFE);
+ break;
+ default:
+ IR_dprintk(1, "Sony invalid bitcount %u\n", data->count);
+ goto out;
+ }
+
+ scancode = device << 16 | subdevice << 8 | function;
+ IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
+ ir_keydown(input_dev, scancode, 0);
+ data->state = STATE_INACTIVE;
+ return 0;
+ }
+
+out:
+ IR_dprintk(1, "Sony decode failed at state %d (%uus %s)\n",
+ data->state, TO_US(ev.duration), TO_STR(ev.pulse));
+ data->state = STATE_INACTIVE;
+ return -EINVAL;
+}
+
+static struct ir_raw_handler sony_handler = {
+ .protocols = IR_TYPE_SONY,
+ .decode = ir_sony_decode,
+};
+
+static int __init ir_sony_decode_init(void)
+{
+ ir_raw_handler_register(&sony_handler);
+
+ printk(KERN_INFO "IR Sony protocol handler initialized\n");
+ return 0;
+}
+
+static void __exit ir_sony_decode_exit(void)
+{
+ ir_raw_handler_unregister(&sony_handler);
+}
+
+module_init(ir_sony_decode_init);
+module_exit(ir_sony_decode_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("Sony IR protocol decoder");
--- /dev/null
+/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include "ir-core-priv.h"
+
+#define IRRCV_NUM_DEVICES 256
+
+/* bit array to represent IR sysfs device number */
+static unsigned long ir_core_dev_number;
+
+/* class for /sys/class/rc */
+static char *ir_devnode(struct device *dev, mode_t *mode)
+{
+ return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
+}
+
+static struct class ir_input_class = {
+ .name = "rc",
+ .devnode = ir_devnode,
+};
+
+static struct {
+ u64 type;
+ char *name;
+} proto_names[] = {
+ { IR_TYPE_UNKNOWN, "unknown" },
+ { IR_TYPE_RC5, "rc-5" },
+ { IR_TYPE_NEC, "nec" },
+ { IR_TYPE_RC6, "rc-6" },
+ { IR_TYPE_JVC, "jvc" },
+ { IR_TYPE_SONY, "sony" },
+ { IR_TYPE_RC5_SZ, "rc-5-sz" },
+ { IR_TYPE_LIRC, "lirc" },
+};
+
+#define PROTO_NONE "none"
+
+/**
+ * show_protocols() - shows the current IR protocol(s)
+ * @d: the device descriptor
+ * @mattr: the device attribute struct (unused)
+ * @buf: a pointer to the output buffer
+ *
+ * This routine is a callback routine for input read the IR protocol type(s).
+ * it is trigged by reading /sys/class/rc/rc?/protocols.
+ * It returns the protocol names of supported protocols.
+ * Enabled protocols are printed in brackets.
+ */
+static ssize_t show_protocols(struct device *d,
+ struct device_attribute *mattr, char *buf)
+{
+ struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+ u64 allowed, enabled;
+ char *tmp = buf;
+ int i;
+
+ /* Device is being removed */
+ if (!ir_dev)
+ return -EINVAL;
+
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ enabled = ir_dev->rc_tab.ir_type;
+ allowed = ir_dev->props->allowed_protos;
+ } else if (ir_dev->raw) {
+ enabled = ir_dev->raw->enabled_protocols;
+ allowed = ir_raw_get_allowed_protocols();
+ } else
+ return sprintf(tmp, "[builtin]\n");
+
+ IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
+ (long long)allowed,
+ (long long)enabled);
+
+ for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+ if (allowed & enabled & proto_names[i].type)
+ tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
+ else if (allowed & proto_names[i].type)
+ tmp += sprintf(tmp, "%s ", proto_names[i].name);
+ }
+
+ if (tmp != buf)
+ tmp--;
+ *tmp = '\n';
+ return tmp + 1 - buf;
+}
+
+/**
+ * store_protocols() - changes the current IR protocol(s)
+ * @d: the device descriptor
+ * @mattr: the device attribute struct (unused)
+ * @buf: a pointer to the input buffer
+ * @len: length of the input buffer
+ *
+ * This routine is a callback routine for changing the IR protocol type.
+ * It is trigged by writing to /sys/class/rc/rc?/protocols.
+ * Writing "+proto" will add a protocol to the list of enabled protocols.
+ * Writing "-proto" will remove a protocol from the list of enabled protocols.
+ * Writing "proto" will enable only "proto".
+ * Writing "none" will disable all protocols.
+ * Returns -EINVAL if an invalid protocol combination or unknown protocol name
+ * is used, otherwise @len.
+ */
+static ssize_t store_protocols(struct device *d,
+ struct device_attribute *mattr,
+ const char *data,
+ size_t len)
+{
+ struct ir_input_dev *ir_dev = dev_get_drvdata(d);
+ bool enable, disable;
+ const char *tmp;
+ u64 type;
+ u64 mask;
+ int rc, i, count = 0;
+ unsigned long flags;
+
+ /* Device is being removed */
+ if (!ir_dev)
+ return -EINVAL;
+
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
+ type = ir_dev->rc_tab.ir_type;
+ else if (ir_dev->raw)
+ type = ir_dev->raw->enabled_protocols;
+ else {
+ IR_dprintk(1, "Protocol switching not supported\n");
+ return -EINVAL;
+ }
+
+ while ((tmp = strsep((char **) &data, " \n")) != NULL) {
+ if (!*tmp)
+ break;
+
+ if (*tmp == '+') {
+ enable = true;
+ disable = false;
+ tmp++;
+ } else if (*tmp == '-') {
+ enable = false;
+ disable = true;
+ tmp++;
+ } else {
+ enable = false;
+ disable = false;
+ }
+
+ if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
+ tmp += sizeof(PROTO_NONE);
+ mask = 0;
+ count++;
+ } else {
+ for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+ if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+ tmp += strlen(proto_names[i].name);
+ mask = proto_names[i].type;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(proto_names)) {
+ IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+ return -EINVAL;
+ }
+ count++;
+ }
+
+ if (enable)
+ type |= mask;
+ else if (disable)
+ type &= ~mask;
+ else
+ type = mask;
+ }
+
+ if (!count) {
+ IR_dprintk(1, "Protocol not specified\n");
+ return -EINVAL;
+ }
+
+ if (ir_dev->props && ir_dev->props->change_protocol) {
+ rc = ir_dev->props->change_protocol(ir_dev->props->priv,
+ type);
+ if (rc < 0) {
+ IR_dprintk(1, "Error setting protocols to 0x%llx\n",
+ (long long)type);
+ return -EINVAL;
+ }
+ }
+
+ if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
+ spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
+ ir_dev->rc_tab.ir_type = type;
+ spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
+ } else {
+ ir_dev->raw->enabled_protocols = type;
+ }
+
+ IR_dprintk(1, "Current protocol(s): 0x%llx\n",
+ (long long)type);
+
+ return len;
+}
+
+#define ADD_HOTPLUG_VAR(fmt, val...) \
+ do { \
+ int err = add_uevent_var(env, fmt, val); \
+ if (err) \
+ return err; \
+ } while (0)
+
+static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
+{
+ struct ir_input_dev *ir_dev = dev_get_drvdata(device);
+
+ if (ir_dev->rc_tab.name)
+ ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
+ if (ir_dev->driver_name)
+ ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
+
+ return 0;
+}
+
+/*
+ * Static device attribute struct with the sysfs attributes for IR's
+ */
+static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
+ show_protocols, store_protocols);
+
+static struct attribute *rc_dev_attrs[] = {
+ &dev_attr_protocols.attr,
+ NULL,
+};
+
+static struct attribute_group rc_dev_attr_grp = {
+ .attrs = rc_dev_attrs,
+};
+
+static const struct attribute_group *rc_dev_attr_groups[] = {
+ &rc_dev_attr_grp,
+ NULL
+};
+
+static struct device_type rc_dev_type = {
+ .groups = rc_dev_attr_groups,
+ .uevent = rc_dev_uevent,
+};
+
+/**
+ * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
+ * @input_dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to register the syfs code for IR class
+ */
+int ir_register_class(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ int devno = find_first_zero_bit(&ir_core_dev_number,
+ IRRCV_NUM_DEVICES);
+
+ if (unlikely(devno < 0))
+ return devno;
+
+ ir_dev->dev.type = &rc_dev_type;
+ ir_dev->devno = devno;
+
+ ir_dev->dev.class = &ir_input_class;
+ ir_dev->dev.parent = input_dev->dev.parent;
+ input_dev->dev.parent = &ir_dev->dev;
+ dev_set_name(&ir_dev->dev, "rc%d", devno);
+ dev_set_drvdata(&ir_dev->dev, ir_dev);
+ return device_register(&ir_dev->dev);
+};
+
+/**
+ * ir_register_input - registers ir input device with input subsystem
+ * @input_dev: the struct input_dev descriptor of the device
+ */
+
+int ir_register_input(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+ int rc;
+ const char *path;
+
+
+ rc = input_register_device(input_dev);
+ if (rc < 0) {
+ device_del(&ir_dev->dev);
+ return rc;
+ }
+
+ __module_get(THIS_MODULE);
+
+ path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
+ printk(KERN_INFO "%s: %s as %s\n",
+ dev_name(&ir_dev->dev),
+ input_dev->name ? input_dev->name : "Unspecified device",
+ path ? path : "N/A");
+ kfree(path);
+
+ set_bit(ir_dev->devno, &ir_core_dev_number);
+ return 0;
+}
+
+/**
+ * ir_unregister_class() - removes the sysfs for sysfs for
+ * /sys/class/rc/rc?
+ * @input_dev: the struct input_dev descriptor of the device
+ *
+ * This routine is used to unregister the syfs code for IR class
+ */
+void ir_unregister_class(struct input_dev *input_dev)
+{
+ struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
+
+ input_set_drvdata(input_dev, NULL);
+ clear_bit(ir_dev->devno, &ir_core_dev_number);
+ input_unregister_device(input_dev);
+ device_del(&ir_dev->dev);
+
+ module_put(THIS_MODULE);
+}
+
+/*
+ * Init/exit code for the module. Basically, creates/removes /sys/class/rc
+ */
+
+static int __init ir_core_init(void)
+{
+ int rc = class_register(&ir_input_class);
+ if (rc) {
+ printk(KERN_ERR "ir_core: unable to register rc class\n");
+ return rc;
+ }
+
+ /* Initialize/load the decoders/keymap code that will be used */
+ ir_raw_init();
+ ir_rcmap_init();
+
+ return 0;
+}
+
+static void __exit ir_core_exit(void)
+{
+ class_unregister(&ir_input_class);
+ ir_rcmap_cleanup();
+}
+
+module_init(ir_core_init);
+module_exit(ir_core_exit);
--- /dev/null
+config RC_MAP
+ tristate "Compile Remote Controller keymap modules"
+ depends on IR_CORE
+ default y
+
+ ---help---
+ This option enables the compilation of lots of Remote
+ Controller tables. They are short tables, but if you
+ don't use a remote controller, or prefer to load the
+ tables on userspace, you should disable it.
+
+ The ir-keytable program, available at v4l-utils package
+ provide the tool and the same RC maps for load from
+ userspace. Its available at
+ http://git.linuxtv.org/v4l-utils
--- /dev/null
+obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
+ rc-alink-dtu-m.o \
+ rc-anysee.o \
+ rc-apac-viewcomp.o \
+ rc-asus-pc39.o \
+ rc-ati-tv-wonder-hd-600.o \
+ rc-avermedia-a16d.o \
+ rc-avermedia.o \
+ rc-avermedia-cardbus.o \
+ rc-avermedia-dvbt.o \
+ rc-avermedia-m135a.o \
+ rc-avermedia-m733a-rm-k6.o \
+ rc-avermedia-rm-ks.o \
+ rc-avertv-303.o \
+ rc-azurewave-ad-tu700.o \
+ rc-behold.o \
+ rc-behold-columbus.o \
+ rc-budget-ci-old.o \
+ rc-cinergy-1400.o \
+ rc-cinergy.o \
+ rc-dib0700-nec.o \
+ rc-dib0700-rc5.o \
+ rc-digitalnow-tinytwin.o \
+ rc-digittrade.o \
+ rc-dm1105-nec.o \
+ rc-dntv-live-dvb-t.o \
+ rc-dntv-live-dvbt-pro.o \
+ rc-em-terratec.o \
+ rc-encore-enltv2.o \
+ rc-encore-enltv.o \
+ rc-encore-enltv-fm53.o \
+ rc-evga-indtube.o \
+ rc-eztv.o \
+ rc-flydvb.o \
+ rc-flyvideo.o \
+ rc-fusionhdtv-mce.o \
+ rc-gadmei-rm008z.o \
+ rc-genius-tvgo-a11mce.o \
+ rc-gotview7135.o \
+ rc-hauppauge-new.o \
+ rc-imon-mce.o \
+ rc-imon-pad.o \
+ rc-iodata-bctv7e.o \
+ rc-kaiomy.o \
+ rc-kworld-315u.o \
+ rc-kworld-plus-tv-analog.o \
+ rc-leadtek-y04g0051.o \
+ rc-lirc.o \
+ rc-lme2510.o \
+ rc-manli.o \
+ rc-msi-digivox-ii.o \
+ rc-msi-digivox-iii.o \
+ rc-msi-tvanywhere.o \
+ rc-msi-tvanywhere-plus.o \
+ rc-nebula.o \
+ rc-nec-terratec-cinergy-xs.o \
+ rc-norwood.o \
+ rc-npgtech.o \
+ rc-pctv-sedna.o \
+ rc-pinnacle-color.o \
+ rc-pinnacle-grey.o \
+ rc-pinnacle-pctv-hd.o \
+ rc-pixelview.o \
+ rc-pixelview-mk12.o \
+ rc-pixelview-new.o \
+ rc-powercolor-real-angel.o \
+ rc-proteus-2309.o \
+ rc-purpletv.o \
+ rc-pv951.o \
+ rc-rc5-hauppauge-new.o \
+ rc-rc5-tv.o \
+ rc-rc6-mce.o \
+ rc-real-audio-220-32-keys.o \
+ rc-streamzap.o \
+ rc-tbs-nec.o \
+ rc-terratec-cinergy-xs.o \
+ rc-terratec-slim.o \
+ rc-tevii-nec.o \
+ rc-total-media-in-hand.o \
+ rc-trekstor.o \
+ rc-tt-1500.o \
+ rc-twinhan1027.o \
+ rc-videomate-s350.o \
+ rc-videomate-tv-pvr.o \
+ rc-winfast.o \
+ rc-winfast-usbii-deluxe.o
--- /dev/null
+/* adstech-dvb-t-pci.h - Keytable for adstech_dvb_t_pci Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* ADS Tech Instant TV DVB-T PCI Remote */
+
+static struct ir_scancode adstech_dvb_t_pci[] = {
+ /* Keys 0 to 9 */
+ { 0x4d, KEY_0 },
+ { 0x57, KEY_1 },
+ { 0x4f, KEY_2 },
+ { 0x53, KEY_3 },
+ { 0x56, KEY_4 },
+ { 0x4e, KEY_5 },
+ { 0x5e, KEY_6 },
+ { 0x54, KEY_7 },
+ { 0x4c, KEY_8 },
+ { 0x5c, KEY_9 },
+
+ { 0x5b, KEY_POWER },
+ { 0x5f, KEY_MUTE },
+ { 0x55, KEY_GOTO },
+ { 0x5d, KEY_SEARCH },
+ { 0x17, KEY_EPG }, /* Guide */
+ { 0x1f, KEY_MENU },
+ { 0x0f, KEY_UP },
+ { 0x46, KEY_DOWN },
+ { 0x16, KEY_LEFT },
+ { 0x1e, KEY_RIGHT },
+ { 0x0e, KEY_SELECT }, /* Enter */
+ { 0x5a, KEY_INFO },
+ { 0x52, KEY_EXIT },
+ { 0x59, KEY_PREVIOUS },
+ { 0x51, KEY_NEXT },
+ { 0x58, KEY_REWIND },
+ { 0x50, KEY_FORWARD },
+ { 0x44, KEY_PLAYPAUSE },
+ { 0x07, KEY_STOP },
+ { 0x1b, KEY_RECORD },
+ { 0x13, KEY_TUNER }, /* Live */
+ { 0x0a, KEY_A },
+ { 0x12, KEY_B },
+ { 0x03, KEY_PROG1 }, /* 1 */
+ { 0x01, KEY_PROG2 }, /* 2 */
+ { 0x00, KEY_PROG3 }, /* 3 */
+ { 0x06, KEY_DVD },
+ { 0x48, KEY_AUX }, /* Photo */
+ { 0x40, KEY_VIDEO },
+ { 0x19, KEY_AUDIO }, /* Music */
+ { 0x0b, KEY_CHANNELUP },
+ { 0x08, KEY_CHANNELDOWN },
+ { 0x15, KEY_VOLUMEUP },
+ { 0x1c, KEY_VOLUMEDOWN },
+};
+
+static struct rc_keymap adstech_dvb_t_pci_map = {
+ .map = {
+ .scan = adstech_dvb_t_pci,
+ .size = ARRAY_SIZE(adstech_dvb_t_pci),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_ADSTECH_DVB_T_PCI,
+ }
+};
+
+static int __init init_rc_map_adstech_dvb_t_pci(void)
+{
+ return ir_register_map(&adstech_dvb_t_pci_map);
+}
+
+static void __exit exit_rc_map_adstech_dvb_t_pci(void)
+{
+ ir_unregister_map(&adstech_dvb_t_pci_map);
+}
+
+module_init(init_rc_map_adstech_dvb_t_pci)
+module_exit(exit_rc_map_adstech_dvb_t_pci)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * A-Link DTU(m) remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* A-Link DTU(m) slim remote, 6 rows, 3 columns. */
+static struct ir_scancode alink_dtu_m[] = {
+ { 0x0800, KEY_VOLUMEUP },
+ { 0x0801, KEY_1 },
+ { 0x0802, KEY_3 },
+ { 0x0803, KEY_7 },
+ { 0x0804, KEY_9 },
+ { 0x0805, KEY_NEW }, /* symbol: PIP */
+ { 0x0806, KEY_0 },
+ { 0x0807, KEY_CHANNEL }, /* JUMP */
+ { 0x080d, KEY_5 },
+ { 0x080f, KEY_2 },
+ { 0x0812, KEY_POWER2 },
+ { 0x0814, KEY_CHANNELUP },
+ { 0x0816, KEY_VOLUMEDOWN },
+ { 0x0818, KEY_6 },
+ { 0x081a, KEY_MUTE },
+ { 0x081b, KEY_8 },
+ { 0x081c, KEY_4 },
+ { 0x081d, KEY_CHANNELDOWN },
+};
+
+static struct rc_keymap alink_dtu_m_map = {
+ .map = {
+ .scan = alink_dtu_m,
+ .size = ARRAY_SIZE(alink_dtu_m),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_ALINK_DTU_M,
+ }
+};
+
+static int __init init_rc_map_alink_dtu_m(void)
+{
+ return ir_register_map(&alink_dtu_m_map);
+}
+
+static void __exit exit_rc_map_alink_dtu_m(void)
+{
+ ir_unregister_map(&alink_dtu_m_map);
+}
+
+module_init(init_rc_map_alink_dtu_m)
+module_exit(exit_rc_map_alink_dtu_m)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/*
+ * Anysee remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode anysee[] = {
+ { 0x0800, KEY_0 },
+ { 0x0801, KEY_1 },
+ { 0x0802, KEY_2 },
+ { 0x0803, KEY_3 },
+ { 0x0804, KEY_4 },
+ { 0x0805, KEY_5 },
+ { 0x0806, KEY_6 },
+ { 0x0807, KEY_7 },
+ { 0x0808, KEY_8 },
+ { 0x0809, KEY_9 },
+ { 0x080a, KEY_POWER2 }, /* [red power button] */
+ { 0x080b, KEY_VIDEO }, /* [*] MODE */
+ { 0x080c, KEY_CHANNEL }, /* [symbol counterclockwise arrow] */
+ { 0x080d, KEY_NEXT }, /* [>>|] */
+ { 0x080e, KEY_MENU }, /* MENU */
+ { 0x080f, KEY_EPG }, /* [EPG] */
+ { 0x0810, KEY_CLEAR }, /* EXIT */
+ { 0x0811, KEY_CHANNELUP },
+ { 0x0812, KEY_VOLUMEDOWN },
+ { 0x0813, KEY_VOLUMEUP },
+ { 0x0814, KEY_CHANNELDOWN },
+ { 0x0815, KEY_OK },
+ { 0x0816, KEY_RADIO }, /* [symbol TV/radio] */
+ { 0x0817, KEY_INFO }, /* [i] */
+ { 0x0818, KEY_PREVIOUS }, /* [|<<] */
+ { 0x0819, KEY_FAVORITES }, /* FAV. */
+ { 0x081a, KEY_SUBTITLE }, /* Subtitle */
+ { 0x081b, KEY_CAMERA }, /* [symbol camera] */
+ { 0x081c, KEY_YELLOW },
+ { 0x081d, KEY_RED },
+ { 0x081e, KEY_LANGUAGE }, /* [symbol Second Audio Program] */
+ { 0x081f, KEY_GREEN },
+ { 0x0820, KEY_SLEEP }, /* Sleep */
+ { 0x0821, KEY_SCREEN }, /* 16:9 / 4:3 */
+ { 0x0822, KEY_ZOOM }, /* SIZE */
+ { 0x0824, KEY_FN }, /* [F1] */
+ { 0x0825, KEY_FN }, /* [F2] */
+ { 0x0842, KEY_MUTE }, /* symbol mute */
+ { 0x0844, KEY_BLUE },
+ { 0x0847, KEY_TEXT }, /* TEXT */
+ { 0x0848, KEY_STOP },
+ { 0x0849, KEY_RECORD },
+ { 0x0850, KEY_PLAY },
+ { 0x0851, KEY_PAUSE },
+};
+
+static struct rc_keymap anysee_map = {
+ .map = {
+ .scan = anysee,
+ .size = ARRAY_SIZE(anysee),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_ANYSEE,
+ }
+};
+
+static int __init init_rc_map_anysee(void)
+{
+ return ir_register_map(&anysee_map);
+}
+
+static void __exit exit_rc_map_anysee(void)
+{
+ ir_unregister_map(&anysee_map);
+}
+
+module_init(init_rc_map_anysee)
+module_exit(exit_rc_map_anysee)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/* apac-viewcomp.h - Keytable for apac_viewcomp Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Attila Kondoros <attila.kondoros@chello.hu> */
+
+static struct ir_scancode apac_viewcomp[] = {
+
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+ { 0x00, KEY_0 },
+ { 0x17, KEY_LAST }, /* +100 */
+ { 0x0a, KEY_LIST }, /* recall */
+
+
+ { 0x1c, KEY_TUNER }, /* TV/FM */
+ { 0x15, KEY_SEARCH }, /* scan */
+ { 0x12, KEY_POWER }, /* power */
+ { 0x1f, KEY_VOLUMEDOWN }, /* vol up */
+ { 0x1b, KEY_VOLUMEUP }, /* vol down */
+ { 0x1e, KEY_CHANNELDOWN }, /* chn up */
+ { 0x1a, KEY_CHANNELUP }, /* chn down */
+
+ { 0x11, KEY_VIDEO }, /* video */
+ { 0x0f, KEY_ZOOM }, /* full screen */
+ { 0x13, KEY_MUTE }, /* mute/unmute */
+ { 0x10, KEY_TEXT }, /* min */
+
+ { 0x0d, KEY_STOP }, /* freeze */
+ { 0x0e, KEY_RECORD }, /* record */
+ { 0x1d, KEY_PLAYPAUSE }, /* stop */
+ { 0x19, KEY_PLAY }, /* play */
+
+ { 0x16, KEY_GOTO }, /* osd */
+ { 0x14, KEY_REFRESH }, /* default */
+ { 0x0c, KEY_KPPLUS }, /* fine tune >>>> */
+ { 0x18, KEY_KPMINUS }, /* fine tune <<<< */
+};
+
+static struct rc_keymap apac_viewcomp_map = {
+ .map = {
+ .scan = apac_viewcomp,
+ .size = ARRAY_SIZE(apac_viewcomp),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_APAC_VIEWCOMP,
+ }
+};
+
+static int __init init_rc_map_apac_viewcomp(void)
+{
+ return ir_register_map(&apac_viewcomp_map);
+}
+
+static void __exit exit_rc_map_apac_viewcomp(void)
+{
+ ir_unregister_map(&apac_viewcomp_map);
+}
+
+module_init(init_rc_map_apac_viewcomp)
+module_exit(exit_rc_map_apac_viewcomp)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* asus-pc39.h - Keytable for asus_pc39 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Marc Fargas <telenieko@telenieko.com>
+ * this is the remote control that comes with the asus p7131
+ * which has a label saying is "Model PC-39"
+ */
+
+static struct ir_scancode asus_pc39[] = {
+ /* Keys 0 to 9 */
+ { 0x082a, KEY_0 },
+ { 0x0816, KEY_1 },
+ { 0x0812, KEY_2 },
+ { 0x0814, KEY_3 },
+ { 0x0836, KEY_4 },
+ { 0x0832, KEY_5 },
+ { 0x0834, KEY_6 },
+ { 0x080e, KEY_7 },
+ { 0x080a, KEY_8 },
+ { 0x080c, KEY_9 },
+
+ { 0x0801, KEY_RADIO }, /* radio */
+ { 0x083c, KEY_MENU }, /* dvd/menu */
+ { 0x0815, KEY_VOLUMEUP },
+ { 0x0826, KEY_VOLUMEDOWN },
+ { 0x0808, KEY_UP },
+ { 0x0804, KEY_DOWN },
+ { 0x0818, KEY_LEFT },
+ { 0x0810, KEY_RIGHT },
+ { 0x081a, KEY_VIDEO }, /* video */
+ { 0x0806, KEY_AUDIO }, /* music */
+
+ { 0x081e, KEY_TV }, /* tv */
+ { 0x0822, KEY_EXIT }, /* back */
+ { 0x0835, KEY_CHANNELUP }, /* channel / program + */
+ { 0x0824, KEY_CHANNELDOWN }, /* channel / program - */
+ { 0x0825, KEY_ENTER }, /* enter */
+
+ { 0x0839, KEY_PAUSE }, /* play/pause */
+ { 0x0821, KEY_PREVIOUS }, /* rew */
+ { 0x0819, KEY_NEXT }, /* forward */
+ { 0x0831, KEY_REWIND }, /* backward << */
+ { 0x0805, KEY_FASTFORWARD }, /* forward >> */
+ { 0x0809, KEY_STOP },
+ { 0x0811, KEY_RECORD }, /* recording */
+ { 0x0829, KEY_POWER }, /* the button that reads "close" */
+
+ { 0x082e, KEY_ZOOM }, /* full screen */
+ { 0x082c, KEY_MACRO }, /* recall */
+ { 0x081c, KEY_HOME }, /* home */
+ { 0x083a, KEY_PVR }, /* picture */
+ { 0x0802, KEY_MUTE }, /* mute */
+ { 0x083e, KEY_DVD }, /* dvd */
+};
+
+static struct rc_keymap asus_pc39_map = {
+ .map = {
+ .scan = asus_pc39,
+ .size = ARRAY_SIZE(asus_pc39),
+ .ir_type = IR_TYPE_RC5,
+ .name = RC_MAP_ASUS_PC39,
+ }
+};
+
+static int __init init_rc_map_asus_pc39(void)
+{
+ return ir_register_map(&asus_pc39_map);
+}
+
+static void __exit exit_rc_map_asus_pc39(void)
+{
+ ir_unregister_map(&asus_pc39_map);
+}
+
+module_init(init_rc_map_asus_pc39)
+module_exit(exit_rc_map_asus_pc39)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* ati-tv-wonder-hd-600.h - Keytable for ati_tv_wonder_hd_600 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* ATI TV Wonder HD 600 USB
+ Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+
+static struct ir_scancode ati_tv_wonder_hd_600[] = {
+ { 0x00, KEY_RECORD}, /* Row 1 */
+ { 0x01, KEY_PLAYPAUSE},
+ { 0x02, KEY_STOP},
+ { 0x03, KEY_POWER},
+ { 0x04, KEY_PREVIOUS}, /* Row 2 */
+ { 0x05, KEY_REWIND},
+ { 0x06, KEY_FORWARD},
+ { 0x07, KEY_NEXT},
+ { 0x08, KEY_EPG}, /* Row 3 */
+ { 0x09, KEY_HOME},
+ { 0x0a, KEY_MENU},
+ { 0x0b, KEY_CHANNELUP},
+ { 0x0c, KEY_BACK}, /* Row 4 */
+ { 0x0d, KEY_UP},
+ { 0x0e, KEY_INFO},
+ { 0x0f, KEY_CHANNELDOWN},
+ { 0x10, KEY_LEFT}, /* Row 5 */
+ { 0x11, KEY_SELECT},
+ { 0x12, KEY_RIGHT},
+ { 0x13, KEY_VOLUMEUP},
+ { 0x14, KEY_LAST}, /* Row 6 */
+ { 0x15, KEY_DOWN},
+ { 0x16, KEY_MUTE},
+ { 0x17, KEY_VOLUMEDOWN},
+};
+
+static struct rc_keymap ati_tv_wonder_hd_600_map = {
+ .map = {
+ .scan = ati_tv_wonder_hd_600,
+ .size = ARRAY_SIZE(ati_tv_wonder_hd_600),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_ATI_TV_WONDER_HD_600,
+ }
+};
+
+static int __init init_rc_map_ati_tv_wonder_hd_600(void)
+{
+ return ir_register_map(&ati_tv_wonder_hd_600_map);
+}
+
+static void __exit exit_rc_map_ati_tv_wonder_hd_600(void)
+{
+ ir_unregister_map(&ati_tv_wonder_hd_600_map);
+}
+
+module_init(init_rc_map_ati_tv_wonder_hd_600)
+module_exit(exit_rc_map_ati_tv_wonder_hd_600)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* avermedia-a16d.h - Keytable for avermedia_a16d Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode avermedia_a16d[] = {
+ { 0x20, KEY_LIST},
+ { 0x00, KEY_POWER},
+ { 0x28, KEY_1},
+ { 0x18, KEY_2},
+ { 0x38, KEY_3},
+ { 0x24, KEY_4},
+ { 0x14, KEY_5},
+ { 0x34, KEY_6},
+ { 0x2c, KEY_7},
+ { 0x1c, KEY_8},
+ { 0x3c, KEY_9},
+ { 0x12, KEY_SUBTITLE},
+ { 0x22, KEY_0},
+ { 0x32, KEY_REWIND},
+ { 0x3a, KEY_SHUFFLE},
+ { 0x02, KEY_PRINT},
+ { 0x11, KEY_CHANNELDOWN},
+ { 0x31, KEY_CHANNELUP},
+ { 0x0c, KEY_ZOOM},
+ { 0x1e, KEY_VOLUMEDOWN},
+ { 0x3e, KEY_VOLUMEUP},
+ { 0x0a, KEY_MUTE},
+ { 0x04, KEY_AUDIO},
+ { 0x26, KEY_RECORD},
+ { 0x06, KEY_PLAY},
+ { 0x36, KEY_STOP},
+ { 0x16, KEY_PAUSE},
+ { 0x2e, KEY_REWIND},
+ { 0x0e, KEY_FASTFORWARD},
+ { 0x30, KEY_TEXT},
+ { 0x21, KEY_GREEN},
+ { 0x01, KEY_BLUE},
+ { 0x08, KEY_EPG},
+ { 0x2a, KEY_MENU},
+};
+
+static struct rc_keymap avermedia_a16d_map = {
+ .map = {
+ .scan = avermedia_a16d,
+ .size = ARRAY_SIZE(avermedia_a16d),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_AVERMEDIA_A16D,
+ }
+};
+
+static int __init init_rc_map_avermedia_a16d(void)
+{
+ return ir_register_map(&avermedia_a16d_map);
+}
+
+static void __exit exit_rc_map_avermedia_a16d(void)
+{
+ ir_unregister_map(&avermedia_a16d_map);
+}
+
+module_init(init_rc_map_avermedia_a16d)
+module_exit(exit_rc_map_avermedia_a16d)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* avermedia-cardbus.h - Keytable for avermedia_cardbus Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Oldrich Jedlicka <oldium.pro@seznam.cz> */
+
+static struct ir_scancode avermedia_cardbus[] = {
+ { 0x00, KEY_POWER },
+ { 0x01, KEY_TUNER }, /* TV/FM */
+ { 0x03, KEY_TEXT }, /* Teletext */
+ { 0x04, KEY_EPG },
+ { 0x05, KEY_1 },
+ { 0x06, KEY_2 },
+ { 0x07, KEY_3 },
+ { 0x08, KEY_AUDIO },
+ { 0x09, KEY_4 },
+ { 0x0a, KEY_5 },
+ { 0x0b, KEY_6 },
+ { 0x0c, KEY_ZOOM }, /* Full screen */
+ { 0x0d, KEY_7 },
+ { 0x0e, KEY_8 },
+ { 0x0f, KEY_9 },
+ { 0x10, KEY_PAGEUP }, /* 16-CH PREV */
+ { 0x11, KEY_0 },
+ { 0x12, KEY_INFO },
+ { 0x13, KEY_AGAIN }, /* CH RTN - channel return */
+ { 0x14, KEY_MUTE },
+ { 0x15, KEY_EDIT }, /* Autoscan */
+ { 0x17, KEY_SAVE }, /* Screenshot */
+ { 0x18, KEY_PLAYPAUSE },
+ { 0x19, KEY_RECORD },
+ { 0x1a, KEY_PLAY },
+ { 0x1b, KEY_STOP },
+ { 0x1c, KEY_FASTFORWARD },
+ { 0x1d, KEY_REWIND },
+ { 0x1e, KEY_VOLUMEDOWN },
+ { 0x1f, KEY_VOLUMEUP },
+ { 0x22, KEY_SLEEP }, /* Sleep */
+ { 0x23, KEY_ZOOM }, /* Aspect */
+ { 0x26, KEY_SCREEN }, /* Pos */
+ { 0x27, KEY_ANGLE }, /* Size */
+ { 0x28, KEY_SELECT }, /* Select */
+ { 0x29, KEY_BLUE }, /* Blue/Picture */
+ { 0x2a, KEY_BACKSPACE }, /* Back */
+ { 0x2b, KEY_MEDIA }, /* PIP (Picture-in-picture) */
+ { 0x2c, KEY_DOWN },
+ { 0x2e, KEY_DOT },
+ { 0x2f, KEY_TV }, /* Live TV */
+ { 0x32, KEY_LEFT },
+ { 0x33, KEY_CLEAR }, /* Clear */
+ { 0x35, KEY_RED }, /* Red/TV */
+ { 0x36, KEY_UP },
+ { 0x37, KEY_HOME }, /* Home */
+ { 0x39, KEY_GREEN }, /* Green/Video */
+ { 0x3d, KEY_YELLOW }, /* Yellow/Music */
+ { 0x3e, KEY_OK }, /* Ok */
+ { 0x3f, KEY_RIGHT },
+ { 0x40, KEY_NEXT }, /* Next */
+ { 0x41, KEY_PREVIOUS }, /* Previous */
+ { 0x42, KEY_CHANNELDOWN }, /* Channel down */
+ { 0x43, KEY_CHANNELUP }, /* Channel up */
+};
+
+static struct rc_keymap avermedia_cardbus_map = {
+ .map = {
+ .scan = avermedia_cardbus,
+ .size = ARRAY_SIZE(avermedia_cardbus),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_AVERMEDIA_CARDBUS,
+ }
+};
+
+static int __init init_rc_map_avermedia_cardbus(void)
+{
+ return ir_register_map(&avermedia_cardbus_map);
+}
+
+static void __exit exit_rc_map_avermedia_cardbus(void)
+{
+ ir_unregister_map(&avermedia_cardbus_map);
+}
+
+module_init(init_rc_map_avermedia_cardbus)
+module_exit(exit_rc_map_avermedia_cardbus)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* avermedia-dvbt.h - Keytable for avermedia_dvbt Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Matt Jesson <dvb@jesson.eclipse.co.uk */
+
+static struct ir_scancode avermedia_dvbt[] = {
+ { 0x28, KEY_0 }, /* '0' / 'enter' */
+ { 0x22, KEY_1 }, /* '1' */
+ { 0x12, KEY_2 }, /* '2' / 'up arrow' */
+ { 0x32, KEY_3 }, /* '3' */
+ { 0x24, KEY_4 }, /* '4' / 'left arrow' */
+ { 0x14, KEY_5 }, /* '5' */
+ { 0x34, KEY_6 }, /* '6' / 'right arrow' */
+ { 0x26, KEY_7 }, /* '7' */
+ { 0x16, KEY_8 }, /* '8' / 'down arrow' */
+ { 0x36, KEY_9 }, /* '9' */
+
+ { 0x20, KEY_LIST }, /* 'source' */
+ { 0x10, KEY_TEXT }, /* 'teletext' */
+ { 0x00, KEY_POWER }, /* 'power' */
+ { 0x04, KEY_AUDIO }, /* 'audio' */
+ { 0x06, KEY_ZOOM }, /* 'full screen' */
+ { 0x18, KEY_VIDEO }, /* 'display' */
+ { 0x38, KEY_SEARCH }, /* 'loop' */
+ { 0x08, KEY_INFO }, /* 'preview' */
+ { 0x2a, KEY_REWIND }, /* 'backward <<' */
+ { 0x1a, KEY_FASTFORWARD }, /* 'forward >>' */
+ { 0x3a, KEY_RECORD }, /* 'capture' */
+ { 0x0a, KEY_MUTE }, /* 'mute' */
+ { 0x2c, KEY_RECORD }, /* 'record' */
+ { 0x1c, KEY_PAUSE }, /* 'pause' */
+ { 0x3c, KEY_STOP }, /* 'stop' */
+ { 0x0c, KEY_PLAY }, /* 'play' */
+ { 0x2e, KEY_RED }, /* 'red' */
+ { 0x01, KEY_BLUE }, /* 'blue' / 'cancel' */
+ { 0x0e, KEY_YELLOW }, /* 'yellow' / 'ok' */
+ { 0x21, KEY_GREEN }, /* 'green' */
+ { 0x11, KEY_CHANNELDOWN }, /* 'channel -' */
+ { 0x31, KEY_CHANNELUP }, /* 'channel +' */
+ { 0x1e, KEY_VOLUMEDOWN }, /* 'volume -' */
+ { 0x3e, KEY_VOLUMEUP }, /* 'volume +' */
+};
+
+static struct rc_keymap avermedia_dvbt_map = {
+ .map = {
+ .scan = avermedia_dvbt,
+ .size = ARRAY_SIZE(avermedia_dvbt),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_AVERMEDIA_DVBT,
+ }
+};
+
+static int __init init_rc_map_avermedia_dvbt(void)
+{
+ return ir_register_map(&avermedia_dvbt_map);
+}
+
+static void __exit exit_rc_map_avermedia_dvbt(void)
+{
+ ir_unregister_map(&avermedia_dvbt_map);
+}
+
+module_init(init_rc_map_avermedia_dvbt)
+module_exit(exit_rc_map_avermedia_dvbt)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* avermedia-m135a.c - Keytable for Avermedia M135A Remote Controllers
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M135A with RM-JX and RM-K6 remote controls
+ *
+ * On Avermedia M135A with IR model RM-JX, the same codes exist on both
+ * Positivo (BR) and original IR, initial version and remote control codes
+ * added by Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * Positivo also ships Avermedia M135A with model RM-K6, extra control
+ * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m135a[] = {
+ /* RM-JX */
+ { 0x0200, KEY_POWER2 },
+ { 0x022e, KEY_DOT }, /* '.' */
+ { 0x0201, KEY_MODE }, /* TV/FM or SOURCE */
+
+ { 0x0205, KEY_1 },
+ { 0x0206, KEY_2 },
+ { 0x0207, KEY_3 },
+ { 0x0209, KEY_4 },
+ { 0x020a, KEY_5 },
+ { 0x020b, KEY_6 },
+ { 0x020d, KEY_7 },
+ { 0x020e, KEY_8 },
+ { 0x020f, KEY_9 },
+ { 0x0211, KEY_0 },
+
+ { 0x0213, KEY_RIGHT }, /* -> or L */
+ { 0x0212, KEY_LEFT }, /* <- or R */
+
+ { 0x0217, KEY_SLEEP }, /* Capturar Imagem or Snapshot */
+ { 0x0210, KEY_SHUFFLE }, /* Amostra or 16 chan prev */
+
+ { 0x0303, KEY_CHANNELUP },
+ { 0x0302, KEY_CHANNELDOWN },
+ { 0x021f, KEY_VOLUMEUP },
+ { 0x021e, KEY_VOLUMEDOWN },
+ { 0x020c, KEY_ENTER }, /* Full Screen */
+
+ { 0x0214, KEY_MUTE },
+ { 0x0208, KEY_AUDIO },
+
+ { 0x0203, KEY_TEXT }, /* Teletext */
+ { 0x0204, KEY_EPG },
+ { 0x022b, KEY_TV2 }, /* TV2 or PIP */
+
+ { 0x021d, KEY_RED },
+ { 0x021c, KEY_YELLOW },
+ { 0x0301, KEY_GREEN },
+ { 0x0300, KEY_BLUE },
+
+ { 0x021a, KEY_PLAYPAUSE },
+ { 0x0219, KEY_RECORD },
+ { 0x0218, KEY_PLAY },
+ { 0x021b, KEY_STOP },
+
+ /* RM-K6 */
+ { 0x0401, KEY_POWER2 },
+ { 0x0406, KEY_MUTE },
+ { 0x0408, KEY_MODE }, /* TV/FM */
+
+ { 0x0409, KEY_1 },
+ { 0x040a, KEY_2 },
+ { 0x040b, KEY_3 },
+ { 0x040c, KEY_4 },
+ { 0x040d, KEY_5 },
+ { 0x040e, KEY_6 },
+ { 0x040f, KEY_7 },
+ { 0x0410, KEY_8 },
+ { 0x0411, KEY_9 },
+ { 0x044c, KEY_DOT }, /* '.' */
+ { 0x0412, KEY_0 },
+ { 0x0407, KEY_REFRESH }, /* Refresh/Reload */
+
+ { 0x0413, KEY_AUDIO },
+ { 0x0440, KEY_SCREEN }, /* Full Screen toggle */
+ { 0x0441, KEY_HOME },
+ { 0x0442, KEY_BACK },
+ { 0x0447, KEY_UP },
+ { 0x0448, KEY_DOWN },
+ { 0x0449, KEY_LEFT },
+ { 0x044a, KEY_RIGHT },
+ { 0x044b, KEY_OK },
+ { 0x0404, KEY_VOLUMEUP },
+ { 0x0405, KEY_VOLUMEDOWN },
+ { 0x0402, KEY_CHANNELUP },
+ { 0x0403, KEY_CHANNELDOWN },
+
+ { 0x0443, KEY_RED },
+ { 0x0444, KEY_GREEN },
+ { 0x0445, KEY_YELLOW },
+ { 0x0446, KEY_BLUE },
+
+ { 0x0414, KEY_TEXT },
+ { 0x0415, KEY_EPG },
+ { 0x041a, KEY_TV2 }, /* PIP */
+ { 0x041b, KEY_MHP }, /* Snapshot */
+
+ { 0x0417, KEY_RECORD },
+ { 0x0416, KEY_PLAYPAUSE },
+ { 0x0418, KEY_STOP },
+ { 0x0419, KEY_PAUSE },
+
+ { 0x041f, KEY_PREVIOUS },
+ { 0x041c, KEY_REWIND },
+ { 0x041d, KEY_FORWARD },
+ { 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m135a_map = {
+ .map = {
+ .scan = avermedia_m135a,
+ .size = ARRAY_SIZE(avermedia_m135a),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_AVERMEDIA_M135A,
+ }
+};
+
+static int __init init_rc_map_avermedia_m135a(void)
+{
+ return ir_register_map(&avermedia_m135a_map);
+}
+
+static void __exit exit_rc_map_avermedia_m135a(void)
+{
+ ir_unregister_map(&avermedia_m135a_map);
+}
+
+module_init(init_rc_map_avermedia_m135a)
+module_exit(exit_rc_map_avermedia_m135a)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* avermedia-m733a-rm-k6.h - Keytable for avermedia_m733a_rm_k6 Remote Controller
+ *
+ * Copyright (c) 2010 by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Avermedia M733A with IR model RM-K6
+ * This is the stock remote controller used with Positivo machines with M733A
+ * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+ */
+
+static struct ir_scancode avermedia_m733a_rm_k6[] = {
+ { 0x0401, KEY_POWER2 },
+ { 0x0406, KEY_MUTE },
+ { 0x0408, KEY_MODE }, /* TV/FM */
+
+ { 0x0409, KEY_1 },
+ { 0x040a, KEY_2 },
+ { 0x040b, KEY_3 },
+ { 0x040c, KEY_4 },
+ { 0x040d, KEY_5 },
+ { 0x040e, KEY_6 },
+ { 0x040f, KEY_7 },
+ { 0x0410, KEY_8 },
+ { 0x0411, KEY_9 },
+ { 0x044c, KEY_DOT }, /* '.' */
+ { 0x0412, KEY_0 },
+ { 0x0407, KEY_REFRESH }, /* Refresh/Reload */
+
+ { 0x0413, KEY_AUDIO },
+ { 0x0440, KEY_SCREEN }, /* Full Screen toggle */
+ { 0x0441, KEY_HOME },
+ { 0x0442, KEY_BACK },
+ { 0x0447, KEY_UP },
+ { 0x0448, KEY_DOWN },
+ { 0x0449, KEY_LEFT },
+ { 0x044a, KEY_RIGHT },
+ { 0x044b, KEY_OK },
+ { 0x0404, KEY_VOLUMEUP },
+ { 0x0405, KEY_VOLUMEDOWN },
+ { 0x0402, KEY_CHANNELUP },
+ { 0x0403, KEY_CHANNELDOWN },
+
+ { 0x0443, KEY_RED },
+ { 0x0444, KEY_GREEN },
+ { 0x0445, KEY_YELLOW },
+ { 0x0446, KEY_BLUE },
+
+ { 0x0414, KEY_TEXT },
+ { 0x0415, KEY_EPG },
+ { 0x041a, KEY_TV2 }, /* PIP */
+ { 0x041b, KEY_MHP }, /* Snapshot */
+
+ { 0x0417, KEY_RECORD },
+ { 0x0416, KEY_PLAYPAUSE },
+ { 0x0418, KEY_STOP },
+ { 0x0419, KEY_PAUSE },
+
+ { 0x041f, KEY_PREVIOUS },
+ { 0x041c, KEY_REWIND },
+ { 0x041d, KEY_FORWARD },
+ { 0x041e, KEY_NEXT },
+};
+
+static struct rc_keymap avermedia_m733a_rm_k6_map = {
+ .map = {
+ .scan = avermedia_m733a_rm_k6,
+ .size = ARRAY_SIZE(avermedia_m733a_rm_k6),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_AVERMEDIA_M733A_RM_K6,
+ }
+};
+
+static int __init init_rc_map_avermedia_m733a_rm_k6(void)
+{
+ return ir_register_map(&avermedia_m733a_rm_k6_map);
+}
+
+static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
+{
+ ir_unregister_map(&avermedia_m733a_rm_k6_map);
+}
+
+module_init(init_rc_map_avermedia_m733a_rm_k6)
+module_exit(exit_rc_map_avermedia_m733a_rm_k6)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * AverMedia RM-KS remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net>
+ and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */
+/* FIXME: mappings are not 100% correct? */
+static struct ir_scancode avermedia_rm_ks[] = {
+ { 0x0501, KEY_POWER2 },
+ { 0x0502, KEY_CHANNELUP },
+ { 0x0503, KEY_CHANNELDOWN },
+ { 0x0504, KEY_VOLUMEUP },
+ { 0x0505, KEY_VOLUMEDOWN },
+ { 0x0506, KEY_MUTE },
+ { 0x0507, KEY_RIGHT },
+ { 0x0508, KEY_PROG1 },
+ { 0x0509, KEY_1 },
+ { 0x050a, KEY_2 },
+ { 0x050b, KEY_3 },
+ { 0x050c, KEY_4 },
+ { 0x050d, KEY_5 },
+ { 0x050e, KEY_6 },
+ { 0x050f, KEY_7 },
+ { 0x0510, KEY_8 },
+ { 0x0511, KEY_9 },
+ { 0x0512, KEY_0 },
+ { 0x0513, KEY_AUDIO },
+ { 0x0515, KEY_EPG },
+ { 0x0516, KEY_PLAY },
+ { 0x0517, KEY_RECORD },
+ { 0x0518, KEY_STOP },
+ { 0x051c, KEY_BACK },
+ { 0x051d, KEY_FORWARD },
+ { 0x054d, KEY_LEFT },
+ { 0x0556, KEY_ZOOM },
+};
+
+static struct rc_keymap avermedia_rm_ks_map = {
+ .map = {
+ .scan = avermedia_rm_ks,
+ .size = ARRAY_SIZE(avermedia_rm_ks),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_AVERMEDIA_RM_KS,
+ }
+};
+
+static int __init init_rc_map_avermedia_rm_ks(void)
+{
+ return ir_register_map(&avermedia_rm_ks_map);
+}
+
+static void __exit exit_rc_map_avermedia_rm_ks(void)
+{
+ ir_unregister_map(&avermedia_rm_ks_map);
+}
+
+module_init(init_rc_map_avermedia_rm_ks)
+module_exit(exit_rc_map_avermedia_rm_ks)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/* avermedia.h - Keytable for avermedia Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Alex Hermann <gaaf@gmx.net> */
+
+static struct ir_scancode avermedia[] = {
+ { 0x28, KEY_1 },
+ { 0x18, KEY_2 },
+ { 0x38, KEY_3 },
+ { 0x24, KEY_4 },
+ { 0x14, KEY_5 },
+ { 0x34, KEY_6 },
+ { 0x2c, KEY_7 },
+ { 0x1c, KEY_8 },
+ { 0x3c, KEY_9 },
+ { 0x22, KEY_0 },
+
+ { 0x20, KEY_TV }, /* TV/FM */
+ { 0x10, KEY_CD }, /* CD */
+ { 0x30, KEY_TEXT }, /* TELETEXT */
+ { 0x00, KEY_POWER }, /* POWER */
+
+ { 0x08, KEY_VIDEO }, /* VIDEO */
+ { 0x04, KEY_AUDIO }, /* AUDIO */
+ { 0x0c, KEY_ZOOM }, /* FULL SCREEN */
+
+ { 0x12, KEY_SUBTITLE }, /* DISPLAY */
+ { 0x32, KEY_REWIND }, /* LOOP */
+ { 0x02, KEY_PRINT }, /* PREVIEW */
+
+ { 0x2a, KEY_SEARCH }, /* AUTOSCAN */
+ { 0x1a, KEY_SLEEP }, /* FREEZE */
+ { 0x3a, KEY_CAMERA }, /* SNAPSHOT */
+ { 0x0a, KEY_MUTE }, /* MUTE */
+
+ { 0x26, KEY_RECORD }, /* RECORD */
+ { 0x16, KEY_PAUSE }, /* PAUSE */
+ { 0x36, KEY_STOP }, /* STOP */
+ { 0x06, KEY_PLAY }, /* PLAY */
+
+ { 0x2e, KEY_RED }, /* RED */
+ { 0x21, KEY_GREEN }, /* GREEN */
+ { 0x0e, KEY_YELLOW }, /* YELLOW */
+ { 0x01, KEY_BLUE }, /* BLUE */
+
+ { 0x1e, KEY_VOLUMEDOWN }, /* VOLUME- */
+ { 0x3e, KEY_VOLUMEUP }, /* VOLUME+ */
+ { 0x11, KEY_CHANNELDOWN }, /* CHANNEL/PAGE- */
+ { 0x31, KEY_CHANNELUP } /* CHANNEL/PAGE+ */
+};
+
+static struct rc_keymap avermedia_map = {
+ .map = {
+ .scan = avermedia,
+ .size = ARRAY_SIZE(avermedia),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_AVERMEDIA,
+ }
+};
+
+static int __init init_rc_map_avermedia(void)
+{
+ return ir_register_map(&avermedia_map);
+}
+
+static void __exit exit_rc_map_avermedia(void)
+{
+ ir_unregister_map(&avermedia_map);
+}
+
+module_init(init_rc_map_avermedia)
+module_exit(exit_rc_map_avermedia)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* avertv-303.h - Keytable for avertv_303 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* AVERTV STUDIO 303 Remote */
+
+static struct ir_scancode avertv_303[] = {
+ { 0x2a, KEY_1 },
+ { 0x32, KEY_2 },
+ { 0x3a, KEY_3 },
+ { 0x4a, KEY_4 },
+ { 0x52, KEY_5 },
+ { 0x5a, KEY_6 },
+ { 0x6a, KEY_7 },
+ { 0x72, KEY_8 },
+ { 0x7a, KEY_9 },
+ { 0x0e, KEY_0 },
+
+ { 0x02, KEY_POWER },
+ { 0x22, KEY_VIDEO },
+ { 0x42, KEY_AUDIO },
+ { 0x62, KEY_ZOOM },
+ { 0x0a, KEY_TV },
+ { 0x12, KEY_CD },
+ { 0x1a, KEY_TEXT },
+
+ { 0x16, KEY_SUBTITLE },
+ { 0x1e, KEY_REWIND },
+ { 0x06, KEY_PRINT },
+
+ { 0x2e, KEY_SEARCH },
+ { 0x36, KEY_SLEEP },
+ { 0x3e, KEY_SHUFFLE },
+ { 0x26, KEY_MUTE },
+
+ { 0x4e, KEY_RECORD },
+ { 0x56, KEY_PAUSE },
+ { 0x5e, KEY_STOP },
+ { 0x46, KEY_PLAY },
+
+ { 0x6e, KEY_RED },
+ { 0x0b, KEY_GREEN },
+ { 0x66, KEY_YELLOW },
+ { 0x03, KEY_BLUE },
+
+ { 0x76, KEY_LEFT },
+ { 0x7e, KEY_RIGHT },
+ { 0x13, KEY_DOWN },
+ { 0x1b, KEY_UP },
+};
+
+static struct rc_keymap avertv_303_map = {
+ .map = {
+ .scan = avertv_303,
+ .size = ARRAY_SIZE(avertv_303),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_AVERTV_303,
+ }
+};
+
+static int __init init_rc_map_avertv_303(void)
+{
+ return ir_register_map(&avertv_303_map);
+}
+
+static void __exit exit_rc_map_avertv_303(void)
+{
+ ir_unregister_map(&avertv_303_map);
+}
+
+module_init(init_rc_map_avertv_303)
+module_exit(exit_rc_map_avertv_303)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * TwinHan AzureWave AD-TU700(704J) remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode azurewave_ad_tu700[] = {
+ { 0x0000, KEY_TAB }, /* Tab */
+ { 0x0001, KEY_2 },
+ { 0x0002, KEY_CHANNELDOWN },
+ { 0x0003, KEY_1 },
+ { 0x0004, KEY_MENU }, /* Record List */
+ { 0x0005, KEY_CHANNELUP },
+ { 0x0006, KEY_3 },
+ { 0x0007, KEY_SLEEP }, /* Hibernate */
+ { 0x0008, KEY_VIDEO }, /* A/V */
+ { 0x0009, KEY_4 },
+ { 0x000a, KEY_VOLUMEDOWN },
+ { 0x000c, KEY_CANCEL }, /* Cancel */
+ { 0x000d, KEY_7 },
+ { 0x000e, KEY_AGAIN }, /* Recall */
+ { 0x000f, KEY_TEXT }, /* Teletext */
+ { 0x0010, KEY_MUTE },
+ { 0x0011, KEY_RECORD },
+ { 0x0012, KEY_FASTFORWARD }, /* FF >> */
+ { 0x0013, KEY_BACK }, /* Back */
+ { 0x0014, KEY_PLAY },
+ { 0x0015, KEY_0 },
+ { 0x0016, KEY_POWER2 }, /* [red power button] */
+ { 0x0017, KEY_FAVORITES }, /* Favorite List */
+ { 0x0018, KEY_RED },
+ { 0x0019, KEY_8 },
+ { 0x001a, KEY_STOP },
+ { 0x001b, KEY_9 },
+ { 0x001c, KEY_EPG }, /* Info/EPG */
+ { 0x001d, KEY_5 },
+ { 0x001e, KEY_VOLUMEUP },
+ { 0x001f, KEY_6 },
+ { 0x0040, KEY_REWIND }, /* FR << */
+ { 0x0041, KEY_PREVIOUS }, /* Replay */
+ { 0x0042, KEY_NEXT }, /* Skip */
+ { 0x0043, KEY_SUBTITLE }, /* Subtitle / CC */
+ { 0x0045, KEY_KPPLUS }, /* Zoom+ */
+ { 0x0046, KEY_KPMINUS }, /* Zoom- */
+ { 0x0047, KEY_NEW }, /* PIP */
+ { 0x0048, KEY_INFO }, /* Preview */
+ { 0x0049, KEY_MODE }, /* L/R */
+ { 0x004a, KEY_CLEAR }, /* Clear */
+ { 0x004b, KEY_UP }, /* up arrow */
+ { 0x004c, KEY_PAUSE },
+ { 0x004d, KEY_ZOOM }, /* Full Screen */
+ { 0x004e, KEY_LEFT }, /* left arrow */
+ { 0x004f, KEY_OK }, /* Enter / ok */
+ { 0x0050, KEY_LANGUAGE }, /* SAP */
+ { 0x0051, KEY_DOWN }, /* down arrow */
+ { 0x0052, KEY_RIGHT }, /* right arrow */
+ { 0x0053, KEY_GREEN },
+ { 0x0054, KEY_CAMERA }, /* Capture */
+ { 0x005e, KEY_YELLOW },
+ { 0x005f, KEY_BLUE },
+};
+
+static struct rc_keymap azurewave_ad_tu700_map = {
+ .map = {
+ .scan = azurewave_ad_tu700,
+ .size = ARRAY_SIZE(azurewave_ad_tu700),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_AZUREWAVE_AD_TU700,
+ }
+};
+
+static int __init init_rc_map_azurewave_ad_tu700(void)
+{
+ return ir_register_map(&azurewave_ad_tu700_map);
+}
+
+static void __exit exit_rc_map_azurewave_ad_tu700(void)
+{
+ ir_unregister_map(&azurewave_ad_tu700_map);
+}
+
+module_init(init_rc_map_azurewave_ad_tu700)
+module_exit(exit_rc_map_azurewave_ad_tu700)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/* behold-columbus.h - Keytable for behold_columbus Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Beholder Intl. Ltd. 2008
+ * Dmitry Belimov d.belimov@google.com
+ * Keytable is used by BeholdTV Columbus
+ * The "ascii-art picture" below (in comments, first row
+ * is the keycode in hex, and subsequent row(s) shows
+ * the button labels (several variants when appropriate)
+ * helps to descide which keycodes to assign to the buttons.
+ */
+
+static struct ir_scancode behold_columbus[] = {
+
+ /* 0x13 0x11 0x1C 0x12 *
+ * Mute Source TV/FM Power *
+ * */
+
+ { 0x13, KEY_MUTE },
+ { 0x11, KEY_PROPS },
+ { 0x1C, KEY_TUNER }, /* KEY_TV/KEY_RADIO */
+ { 0x12, KEY_POWER },
+
+ /* 0x01 0x02 0x03 0x0D *
+ * 1 2 3 Stereo *
+ * *
+ * 0x04 0x05 0x06 0x19 *
+ * 4 5 6 Snapshot *
+ * *
+ * 0x07 0x08 0x09 0x10 *
+ * 7 8 9 Zoom *
+ * */
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x0D, KEY_SETUP }, /* Setup key */
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x19, KEY_CAMERA }, /* Snapshot key */
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+ { 0x10, KEY_ZOOM },
+
+ /* 0x0A 0x00 0x0B 0x0C *
+ * RECALL 0 ChannelUp VolumeUp *
+ * */
+ { 0x0A, KEY_AGAIN },
+ { 0x00, KEY_0 },
+ { 0x0B, KEY_CHANNELUP },
+ { 0x0C, KEY_VOLUMEUP },
+
+ /* 0x1B 0x1D 0x15 0x18 *
+ * Timeshift Record ChannelDown VolumeDown *
+ * */
+
+ { 0x1B, KEY_TIME },
+ { 0x1D, KEY_RECORD },
+ { 0x15, KEY_CHANNELDOWN },
+ { 0x18, KEY_VOLUMEDOWN },
+
+ /* 0x0E 0x1E 0x0F 0x1A *
+ * Stop Pause Previouse Next *
+ * */
+
+ { 0x0E, KEY_STOP },
+ { 0x1E, KEY_PAUSE },
+ { 0x0F, KEY_PREVIOUS },
+ { 0x1A, KEY_NEXT },
+
+};
+
+static struct rc_keymap behold_columbus_map = {
+ .map = {
+ .scan = behold_columbus,
+ .size = ARRAY_SIZE(behold_columbus),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_BEHOLD_COLUMBUS,
+ }
+};
+
+static int __init init_rc_map_behold_columbus(void)
+{
+ return ir_register_map(&behold_columbus_map);
+}
+
+static void __exit exit_rc_map_behold_columbus(void)
+{
+ ir_unregister_map(&behold_columbus_map);
+}
+
+module_init(init_rc_map_behold_columbus)
+module_exit(exit_rc_map_behold_columbus)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* behold.h - Keytable for behold Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Igor Kuznetsov <igk72@ya.ru>
+ * Andrey J. Melnikov <temnota@kmv.ru>
+ *
+ * Keytable is used by BeholdTV 60x series, M6 series at
+ * least, and probably other cards too.
+ * The "ascii-art picture" below (in comments, first row
+ * is the keycode in hex, and subsequent row(s) shows
+ * the button labels (several variants when appropriate)
+ * helps to descide which keycodes to assign to the buttons.
+ */
+
+static struct ir_scancode behold[] = {
+
+ /* 0x1c 0x12 *
+ * TV/FM POWER *
+ * */
+ { 0x1c, KEY_TUNER }, /* XXX KEY_TV / KEY_RADIO */
+ { 0x12, KEY_POWER },
+
+ /* 0x01 0x02 0x03 *
+ * 1 2 3 *
+ * *
+ * 0x04 0x05 0x06 *
+ * 4 5 6 *
+ * *
+ * 0x07 0x08 0x09 *
+ * 7 8 9 *
+ * */
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ /* 0x0a 0x00 0x17 *
+ * RECALL 0 MODE *
+ * */
+ { 0x0a, KEY_AGAIN },
+ { 0x00, KEY_0 },
+ { 0x17, KEY_MODE },
+
+ /* 0x14 0x10 *
+ * ASPECT FULLSCREEN *
+ * */
+ { 0x14, KEY_SCREEN },
+ { 0x10, KEY_ZOOM },
+
+ /* 0x0b *
+ * Up *
+ * *
+ * 0x18 0x16 0x0c *
+ * Left Ok Right *
+ * *
+ * 0x015 *
+ * Down *
+ * */
+ { 0x0b, KEY_CHANNELUP },
+ { 0x18, KEY_VOLUMEDOWN },
+ { 0x16, KEY_OK }, /* XXX KEY_ENTER */
+ { 0x0c, KEY_VOLUMEUP },
+ { 0x15, KEY_CHANNELDOWN },
+
+ /* 0x11 0x0d *
+ * MUTE INFO *
+ * */
+ { 0x11, KEY_MUTE },
+ { 0x0d, KEY_INFO },
+
+ /* 0x0f 0x1b 0x1a *
+ * RECORD PLAY/PAUSE STOP *
+ * *
+ * 0x0e 0x1f 0x1e *
+ *TELETEXT AUDIO SOURCE *
+ * RED YELLOW *
+ * */
+ { 0x0f, KEY_RECORD },
+ { 0x1b, KEY_PLAYPAUSE },
+ { 0x1a, KEY_STOP },
+ { 0x0e, KEY_TEXT },
+ { 0x1f, KEY_RED }, /*XXX KEY_AUDIO */
+ { 0x1e, KEY_YELLOW }, /*XXX KEY_SOURCE */
+
+ /* 0x1d 0x13 0x19 *
+ * SLEEP PREVIEW DVB *
+ * GREEN BLUE *
+ * */
+ { 0x1d, KEY_SLEEP },
+ { 0x13, KEY_GREEN },
+ { 0x19, KEY_BLUE }, /* XXX KEY_SAT */
+
+ /* 0x58 0x5c *
+ * FREEZE SNAPSHOT *
+ * */
+ { 0x58, KEY_SLOW },
+ { 0x5c, KEY_CAMERA },
+
+};
+
+static struct rc_keymap behold_map = {
+ .map = {
+ .scan = behold,
+ .size = ARRAY_SIZE(behold),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_BEHOLD,
+ }
+};
+
+static int __init init_rc_map_behold(void)
+{
+ return ir_register_map(&behold_map);
+}
+
+static void __exit exit_rc_map_behold(void)
+{
+ ir_unregister_map(&behold_map);
+}
+
+module_init(init_rc_map_behold)
+module_exit(exit_rc_map_behold)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* budget-ci-old.h - Keytable for budget_ci_old Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* From reading the following remotes:
+ * Zenith Universal 7 / TV Mode 807 / VCR Mode 837
+ * Hauppauge (from NOVA-CI-s box product)
+ * This is a "middle of the road" approach, differences are noted
+ */
+
+static struct ir_scancode budget_ci_old[] = {
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+ { 0x0a, KEY_ENTER },
+ { 0x0b, KEY_RED },
+ { 0x0c, KEY_POWER }, /* RADIO on Hauppauge */
+ { 0x0d, KEY_MUTE },
+ { 0x0f, KEY_A }, /* TV on Hauppauge */
+ { 0x10, KEY_VOLUMEUP },
+ { 0x11, KEY_VOLUMEDOWN },
+ { 0x14, KEY_B },
+ { 0x1c, KEY_UP },
+ { 0x1d, KEY_DOWN },
+ { 0x1e, KEY_OPTION }, /* RESERVED on Hauppauge */
+ { 0x1f, KEY_BREAK },
+ { 0x20, KEY_CHANNELUP },
+ { 0x21, KEY_CHANNELDOWN },
+ { 0x22, KEY_PREVIOUS }, /* Prev Ch on Zenith, SOURCE on Hauppauge */
+ { 0x24, KEY_RESTART },
+ { 0x25, KEY_OK },
+ { 0x26, KEY_CYCLEWINDOWS }, /* MINIMIZE on Hauppauge */
+ { 0x28, KEY_ENTER }, /* VCR mode on Zenith */
+ { 0x29, KEY_PAUSE },
+ { 0x2b, KEY_RIGHT },
+ { 0x2c, KEY_LEFT },
+ { 0x2e, KEY_MENU }, /* FULL SCREEN on Hauppauge */
+ { 0x30, KEY_SLOW },
+ { 0x31, KEY_PREVIOUS }, /* VCR mode on Zenith */
+ { 0x32, KEY_REWIND },
+ { 0x34, KEY_FASTFORWARD },
+ { 0x35, KEY_PLAY },
+ { 0x36, KEY_STOP },
+ { 0x37, KEY_RECORD },
+ { 0x38, KEY_TUNER }, /* TV/VCR on Zenith */
+ { 0x3a, KEY_C },
+ { 0x3c, KEY_EXIT },
+ { 0x3d, KEY_POWER2 },
+ { 0x3e, KEY_TUNER },
+};
+
+static struct rc_keymap budget_ci_old_map = {
+ .map = {
+ .scan = budget_ci_old,
+ .size = ARRAY_SIZE(budget_ci_old),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_BUDGET_CI_OLD,
+ }
+};
+
+static int __init init_rc_map_budget_ci_old(void)
+{
+ return ir_register_map(&budget_ci_old_map);
+}
+
+static void __exit exit_rc_map_budget_ci_old(void)
+{
+ ir_unregister_map(&budget_ci_old_map);
+}
+
+module_init(init_rc_map_budget_ci_old)
+module_exit(exit_rc_map_budget_ci_old)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* cinergy-1400.h - Keytable for cinergy_1400 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Cinergy 1400 DVB-T */
+
+static struct ir_scancode cinergy_1400[] = {
+ { 0x01, KEY_POWER },
+ { 0x02, KEY_1 },
+ { 0x03, KEY_2 },
+ { 0x04, KEY_3 },
+ { 0x05, KEY_4 },
+ { 0x06, KEY_5 },
+ { 0x07, KEY_6 },
+ { 0x08, KEY_7 },
+ { 0x09, KEY_8 },
+ { 0x0a, KEY_9 },
+ { 0x0c, KEY_0 },
+
+ { 0x0b, KEY_VIDEO },
+ { 0x0d, KEY_REFRESH },
+ { 0x0e, KEY_SELECT },
+ { 0x0f, KEY_EPG },
+ { 0x10, KEY_UP },
+ { 0x11, KEY_LEFT },
+ { 0x12, KEY_OK },
+ { 0x13, KEY_RIGHT },
+ { 0x14, KEY_DOWN },
+ { 0x15, KEY_TEXT },
+ { 0x16, KEY_INFO },
+
+ { 0x17, KEY_RED },
+ { 0x18, KEY_GREEN },
+ { 0x19, KEY_YELLOW },
+ { 0x1a, KEY_BLUE },
+
+ { 0x1b, KEY_CHANNELUP },
+ { 0x1c, KEY_VOLUMEUP },
+ { 0x1d, KEY_MUTE },
+ { 0x1e, KEY_VOLUMEDOWN },
+ { 0x1f, KEY_CHANNELDOWN },
+
+ { 0x40, KEY_PAUSE },
+ { 0x4c, KEY_PLAY },
+ { 0x58, KEY_RECORD },
+ { 0x54, KEY_PREVIOUS },
+ { 0x48, KEY_STOP },
+ { 0x5c, KEY_NEXT },
+};
+
+static struct rc_keymap cinergy_1400_map = {
+ .map = {
+ .scan = cinergy_1400,
+ .size = ARRAY_SIZE(cinergy_1400),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_CINERGY_1400,
+ }
+};
+
+static int __init init_rc_map_cinergy_1400(void)
+{
+ return ir_register_map(&cinergy_1400_map);
+}
+
+static void __exit exit_rc_map_cinergy_1400(void)
+{
+ ir_unregister_map(&cinergy_1400_map);
+}
+
+module_init(init_rc_map_cinergy_1400)
+module_exit(exit_rc_map_cinergy_1400)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* cinergy.h - Keytable for cinergy Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode cinergy[] = {
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ { 0x0a, KEY_POWER },
+ { 0x0b, KEY_PROG1 }, /* app */
+ { 0x0c, KEY_ZOOM }, /* zoom/fullscreen */
+ { 0x0d, KEY_CHANNELUP }, /* channel */
+ { 0x0e, KEY_CHANNELDOWN }, /* channel- */
+ { 0x0f, KEY_VOLUMEUP },
+ { 0x10, KEY_VOLUMEDOWN },
+ { 0x11, KEY_TUNER }, /* AV */
+ { 0x12, KEY_NUMLOCK }, /* -/-- */
+ { 0x13, KEY_AUDIO }, /* audio */
+ { 0x14, KEY_MUTE },
+ { 0x15, KEY_UP },
+ { 0x16, KEY_DOWN },
+ { 0x17, KEY_LEFT },
+ { 0x18, KEY_RIGHT },
+ { 0x19, BTN_LEFT, },
+ { 0x1a, BTN_RIGHT, },
+ { 0x1b, KEY_WWW }, /* text */
+ { 0x1c, KEY_REWIND },
+ { 0x1d, KEY_FORWARD },
+ { 0x1e, KEY_RECORD },
+ { 0x1f, KEY_PLAY },
+ { 0x20, KEY_PREVIOUSSONG },
+ { 0x21, KEY_NEXTSONG },
+ { 0x22, KEY_PAUSE },
+ { 0x23, KEY_STOP },
+};
+
+static struct rc_keymap cinergy_map = {
+ .map = {
+ .scan = cinergy,
+ .size = ARRAY_SIZE(cinergy),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_CINERGY,
+ }
+};
+
+static int __init init_rc_map_cinergy(void)
+{
+ return ir_register_map(&cinergy_map);
+}
+
+static void __exit exit_rc_map_cinergy(void)
+{
+ ir_unregister_map(&cinergy_map);
+}
+
+module_init(init_rc_map_cinergy)
+module_exit(exit_rc_map_cinergy)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc-dvb0700-big.c - Keytable for devices in dvb0700
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * TODO: This table is a real mess, as it merges RC codes from several
+ * devices into a big table. It also has both RC-5 and NEC codes inside.
+ * It should be broken into small tables, and the protocols should properly
+ * be indentificated.
+ *
+ * The table were imported from dib0700_devices.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode dib0700_nec_table[] = {
+ /* Key codes for the Pixelview SBTVD remote */
+ { 0x8613, KEY_MUTE },
+ { 0x8612, KEY_POWER },
+ { 0x8601, KEY_1 },
+ { 0x8602, KEY_2 },
+ { 0x8603, KEY_3 },
+ { 0x8604, KEY_4 },
+ { 0x8605, KEY_5 },
+ { 0x8606, KEY_6 },
+ { 0x8607, KEY_7 },
+ { 0x8608, KEY_8 },
+ { 0x8609, KEY_9 },
+ { 0x8600, KEY_0 },
+ { 0x860d, KEY_CHANNELUP },
+ { 0x8619, KEY_CHANNELDOWN },
+ { 0x8610, KEY_VOLUMEUP },
+ { 0x860c, KEY_VOLUMEDOWN },
+
+ { 0x860a, KEY_CAMERA },
+ { 0x860b, KEY_ZOOM },
+ { 0x861b, KEY_BACKSPACE },
+ { 0x8615, KEY_ENTER },
+
+ { 0x861d, KEY_UP },
+ { 0x861e, KEY_DOWN },
+ { 0x860e, KEY_LEFT },
+ { 0x860f, KEY_RIGHT },
+
+ { 0x8618, KEY_RECORD },
+ { 0x861a, KEY_STOP },
+
+ /* Key codes for the EvolutePC TVWay+ remote */
+ { 0x7a00, KEY_MENU },
+ { 0x7a01, KEY_RECORD },
+ { 0x7a02, KEY_PLAY },
+ { 0x7a03, KEY_STOP },
+ { 0x7a10, KEY_CHANNELUP },
+ { 0x7a11, KEY_CHANNELDOWN },
+ { 0x7a12, KEY_VOLUMEUP },
+ { 0x7a13, KEY_VOLUMEDOWN },
+ { 0x7a40, KEY_POWER },
+ { 0x7a41, KEY_MUTE },
+
+ /* Key codes for the Elgato EyeTV Diversity silver remote */
+ { 0x4501, KEY_POWER },
+ { 0x4502, KEY_MUTE },
+ { 0x4503, KEY_1 },
+ { 0x4504, KEY_2 },
+ { 0x4505, KEY_3 },
+ { 0x4506, KEY_4 },
+ { 0x4507, KEY_5 },
+ { 0x4508, KEY_6 },
+ { 0x4509, KEY_7 },
+ { 0x450a, KEY_8 },
+ { 0x450b, KEY_9 },
+ { 0x450c, KEY_LAST },
+ { 0x450d, KEY_0 },
+ { 0x450e, KEY_ENTER },
+ { 0x450f, KEY_RED },
+ { 0x4510, KEY_CHANNELUP },
+ { 0x4511, KEY_GREEN },
+ { 0x4512, KEY_VOLUMEDOWN },
+ { 0x4513, KEY_OK },
+ { 0x4514, KEY_VOLUMEUP },
+ { 0x4515, KEY_YELLOW },
+ { 0x4516, KEY_CHANNELDOWN },
+ { 0x4517, KEY_BLUE },
+ { 0x4518, KEY_LEFT }, /* Skip backwards */
+ { 0x4519, KEY_PLAYPAUSE },
+ { 0x451a, KEY_RIGHT }, /* Skip forward */
+ { 0x451b, KEY_REWIND },
+ { 0x451c, KEY_L }, /* Live */
+ { 0x451d, KEY_FASTFORWARD },
+ { 0x451e, KEY_STOP }, /* 'Reveal' for Teletext */
+ { 0x451f, KEY_MENU }, /* KEY_TEXT for Teletext */
+ { 0x4540, KEY_RECORD }, /* Font 'Size' for Teletext */
+ { 0x4541, KEY_SCREEN }, /* Full screen toggle, 'Hold' for Teletext */
+ { 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
+};
+
+static struct rc_keymap dib0700_nec_map = {
+ .map = {
+ .scan = dib0700_nec_table,
+ .size = ARRAY_SIZE(dib0700_nec_table),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_DIB0700_NEC_TABLE,
+ }
+};
+
+static int __init init_rc_map(void)
+{
+ return ir_register_map(&dib0700_nec_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+ ir_unregister_map(&dib0700_nec_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc-dvb0700-big.c - Keytable for devices in dvb0700
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * TODO: This table is a real mess, as it merges RC codes from several
+ * devices into a big table. It also has both RC-5 and NEC codes inside.
+ * It should be broken into small tables, and the protocols should properly
+ * be indentificated.
+ *
+ * The table were imported from dib0700_devices.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode dib0700_rc5_table[] = {
+ /* Key codes for the tiny Pinnacle remote*/
+ { 0x0700, KEY_MUTE },
+ { 0x0701, KEY_MENU }, /* Pinnacle logo */
+ { 0x0739, KEY_POWER },
+ { 0x0703, KEY_VOLUMEUP },
+ { 0x0709, KEY_VOLUMEDOWN },
+ { 0x0706, KEY_CHANNELUP },
+ { 0x070c, KEY_CHANNELDOWN },
+ { 0x070f, KEY_1 },
+ { 0x0715, KEY_2 },
+ { 0x0710, KEY_3 },
+ { 0x0718, KEY_4 },
+ { 0x071b, KEY_5 },
+ { 0x071e, KEY_6 },
+ { 0x0711, KEY_7 },
+ { 0x0721, KEY_8 },
+ { 0x0712, KEY_9 },
+ { 0x0727, KEY_0 },
+ { 0x0724, KEY_SCREEN }, /* 'Square' key */
+ { 0x072a, KEY_TEXT }, /* 'T' key */
+ { 0x072d, KEY_REWIND },
+ { 0x0730, KEY_PLAY },
+ { 0x0733, KEY_FASTFORWARD },
+ { 0x0736, KEY_RECORD },
+ { 0x073c, KEY_STOP },
+ { 0x073f, KEY_CANCEL }, /* '?' key */
+
+ /* Key codes for the Terratec Cinergy DT XS Diversity, similar to cinergyT2.c */
+ { 0xeb01, KEY_POWER },
+ { 0xeb02, KEY_1 },
+ { 0xeb03, KEY_2 },
+ { 0xeb04, KEY_3 },
+ { 0xeb05, KEY_4 },
+ { 0xeb06, KEY_5 },
+ { 0xeb07, KEY_6 },
+ { 0xeb08, KEY_7 },
+ { 0xeb09, KEY_8 },
+ { 0xeb0a, KEY_9 },
+ { 0xeb0b, KEY_VIDEO },
+ { 0xeb0c, KEY_0 },
+ { 0xeb0d, KEY_REFRESH },
+ { 0xeb0f, KEY_EPG },
+ { 0xeb10, KEY_UP },
+ { 0xeb11, KEY_LEFT },
+ { 0xeb12, KEY_OK },
+ { 0xeb13, KEY_RIGHT },
+ { 0xeb14, KEY_DOWN },
+ { 0xeb16, KEY_INFO },
+ { 0xeb17, KEY_RED },
+ { 0xeb18, KEY_GREEN },
+ { 0xeb19, KEY_YELLOW },
+ { 0xeb1a, KEY_BLUE },
+ { 0xeb1b, KEY_CHANNELUP },
+ { 0xeb1c, KEY_VOLUMEUP },
+ { 0xeb1d, KEY_MUTE },
+ { 0xeb1e, KEY_VOLUMEDOWN },
+ { 0xeb1f, KEY_CHANNELDOWN },
+ { 0xeb40, KEY_PAUSE },
+ { 0xeb41, KEY_HOME },
+ { 0xeb42, KEY_MENU }, /* DVD Menu */
+ { 0xeb43, KEY_SUBTITLE },
+ { 0xeb44, KEY_TEXT }, /* Teletext */
+ { 0xeb45, KEY_DELETE },
+ { 0xeb46, KEY_TV },
+ { 0xeb47, KEY_DVD },
+ { 0xeb48, KEY_STOP },
+ { 0xeb49, KEY_VIDEO },
+ { 0xeb4a, KEY_AUDIO }, /* Music */
+ { 0xeb4b, KEY_SCREEN }, /* Pic */
+ { 0xeb4c, KEY_PLAY },
+ { 0xeb4d, KEY_BACK },
+ { 0xeb4e, KEY_REWIND },
+ { 0xeb4f, KEY_FASTFORWARD },
+ { 0xeb54, KEY_PREVIOUS },
+ { 0xeb58, KEY_RECORD },
+ { 0xeb5c, KEY_NEXT },
+
+ /* Key codes for the Haupauge WinTV Nova-TD, copied from nova-t-usb2.c (Nova-T USB2) */
+ { 0x1e00, KEY_0 },
+ { 0x1e01, KEY_1 },
+ { 0x1e02, KEY_2 },
+ { 0x1e03, KEY_3 },
+ { 0x1e04, KEY_4 },
+ { 0x1e05, KEY_5 },
+ { 0x1e06, KEY_6 },
+ { 0x1e07, KEY_7 },
+ { 0x1e08, KEY_8 },
+ { 0x1e09, KEY_9 },
+ { 0x1e0a, KEY_KPASTERISK },
+ { 0x1e0b, KEY_RED },
+ { 0x1e0c, KEY_RADIO },
+ { 0x1e0d, KEY_MENU },
+ { 0x1e0e, KEY_GRAVE }, /* # */
+ { 0x1e0f, KEY_MUTE },
+ { 0x1e10, KEY_VOLUMEUP },
+ { 0x1e11, KEY_VOLUMEDOWN },
+ { 0x1e12, KEY_CHANNEL },
+ { 0x1e14, KEY_UP },
+ { 0x1e15, KEY_DOWN },
+ { 0x1e16, KEY_LEFT },
+ { 0x1e17, KEY_RIGHT },
+ { 0x1e18, KEY_VIDEO },
+ { 0x1e19, KEY_AUDIO },
+ { 0x1e1a, KEY_MEDIA },
+ { 0x1e1b, KEY_EPG },
+ { 0x1e1c, KEY_TV },
+ { 0x1e1e, KEY_NEXT },
+ { 0x1e1f, KEY_BACK },
+ { 0x1e20, KEY_CHANNELUP },
+ { 0x1e21, KEY_CHANNELDOWN },
+ { 0x1e24, KEY_LAST }, /* Skip backwards */
+ { 0x1e25, KEY_OK },
+ { 0x1e29, KEY_BLUE},
+ { 0x1e2e, KEY_GREEN },
+ { 0x1e30, KEY_PAUSE },
+ { 0x1e32, KEY_REWIND },
+ { 0x1e34, KEY_FASTFORWARD },
+ { 0x1e35, KEY_PLAY },
+ { 0x1e36, KEY_STOP },
+ { 0x1e37, KEY_RECORD },
+ { 0x1e38, KEY_YELLOW },
+ { 0x1e3b, KEY_GOTO },
+ { 0x1e3d, KEY_POWER },
+
+ /* Key codes for the Leadtek Winfast DTV Dongle */
+ { 0x0042, KEY_POWER },
+ { 0x077c, KEY_TUNER },
+ { 0x0f4e, KEY_PRINT }, /* PREVIEW */
+ { 0x0840, KEY_SCREEN }, /* full screen toggle*/
+ { 0x0f71, KEY_DOT }, /* frequency */
+ { 0x0743, KEY_0 },
+ { 0x0c41, KEY_1 },
+ { 0x0443, KEY_2 },
+ { 0x0b7f, KEY_3 },
+ { 0x0e41, KEY_4 },
+ { 0x0643, KEY_5 },
+ { 0x097f, KEY_6 },
+ { 0x0d7e, KEY_7 },
+ { 0x057c, KEY_8 },
+ { 0x0a40, KEY_9 },
+ { 0x0e4e, KEY_CLEAR },
+ { 0x047c, KEY_CHANNEL }, /* show channel number */
+ { 0x0f41, KEY_LAST }, /* recall */
+ { 0x0342, KEY_MUTE },
+ { 0x064c, KEY_RESERVED }, /* PIP button*/
+ { 0x0172, KEY_SHUFFLE }, /* SNAPSHOT */
+ { 0x0c4e, KEY_PLAYPAUSE }, /* TIMESHIFT */
+ { 0x0b70, KEY_RECORD },
+ { 0x037d, KEY_VOLUMEUP },
+ { 0x017d, KEY_VOLUMEDOWN },
+ { 0x0242, KEY_CHANNELUP },
+ { 0x007d, KEY_CHANNELDOWN },
+
+ /* Key codes for Nova-TD "credit card" remote control. */
+ { 0x1d00, KEY_0 },
+ { 0x1d01, KEY_1 },
+ { 0x1d02, KEY_2 },
+ { 0x1d03, KEY_3 },
+ { 0x1d04, KEY_4 },
+ { 0x1d05, KEY_5 },
+ { 0x1d06, KEY_6 },
+ { 0x1d07, KEY_7 },
+ { 0x1d08, KEY_8 },
+ { 0x1d09, KEY_9 },
+ { 0x1d0a, KEY_TEXT },
+ { 0x1d0d, KEY_MENU },
+ { 0x1d0f, KEY_MUTE },
+ { 0x1d10, KEY_VOLUMEUP },
+ { 0x1d11, KEY_VOLUMEDOWN },
+ { 0x1d12, KEY_CHANNEL },
+ { 0x1d14, KEY_UP },
+ { 0x1d15, KEY_DOWN },
+ { 0x1d16, KEY_LEFT },
+ { 0x1d17, KEY_RIGHT },
+ { 0x1d1c, KEY_TV },
+ { 0x1d1e, KEY_NEXT },
+ { 0x1d1f, KEY_BACK },
+ { 0x1d20, KEY_CHANNELUP },
+ { 0x1d21, KEY_CHANNELDOWN },
+ { 0x1d24, KEY_LAST },
+ { 0x1d25, KEY_OK },
+ { 0x1d30, KEY_PAUSE },
+ { 0x1d32, KEY_REWIND },
+ { 0x1d34, KEY_FASTFORWARD },
+ { 0x1d35, KEY_PLAY },
+ { 0x1d36, KEY_STOP },
+ { 0x1d37, KEY_RECORD },
+ { 0x1d3b, KEY_GOTO },
+ { 0x1d3d, KEY_POWER },
+};
+
+static struct rc_keymap dib0700_rc5_map = {
+ .map = {
+ .scan = dib0700_rc5_table,
+ .size = ARRAY_SIZE(dib0700_rc5_table),
+ .ir_type = IR_TYPE_RC5,
+ .name = RC_MAP_DIB0700_RC5_TABLE,
+ }
+};
+
+static int __init init_rc_map(void)
+{
+ return ir_register_map(&dib0700_rc5_map);
+}
+
+static void __exit exit_rc_map(void)
+{
+ ir_unregister_map(&dib0700_rc5_map);
+}
+
+module_init(init_rc_map)
+module_exit(exit_rc_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * DigitalNow TinyTwin remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode digitalnow_tinytwin[] = {
+ { 0x0000, KEY_MUTE }, /* [symbol speaker] */
+ { 0x0001, KEY_VOLUMEUP },
+ { 0x0002, KEY_POWER2 }, /* TV [power button] */
+ { 0x0003, KEY_2 },
+ { 0x0004, KEY_3 },
+ { 0x0005, KEY_4 },
+ { 0x0006, KEY_6 },
+ { 0x0007, KEY_7 },
+ { 0x0008, KEY_8 },
+ { 0x0009, KEY_NUMERIC_STAR }, /* [*] */
+ { 0x000a, KEY_0 },
+ { 0x000b, KEY_NUMERIC_POUND }, /* [#] */
+ { 0x000c, KEY_RIGHT }, /* [right arrow] */
+ { 0x000d, KEY_HOMEPAGE }, /* [symbol home] Start */
+ { 0x000e, KEY_RED }, /* [red] Videos */
+ { 0x0010, KEY_POWER }, /* PC [power button] */
+ { 0x0011, KEY_YELLOW }, /* [yellow] Pictures */
+ { 0x0012, KEY_DOWN }, /* [down arrow] */
+ { 0x0013, KEY_GREEN }, /* [green] Music */
+ { 0x0014, KEY_CYCLEWINDOWS }, /* BACK */
+ { 0x0015, KEY_FAVORITES }, /* MORE */
+ { 0x0016, KEY_UP }, /* [up arrow] */
+ { 0x0017, KEY_LEFT }, /* [left arrow] */
+ { 0x0018, KEY_OK }, /* OK */
+ { 0x0019, KEY_BLUE }, /* [blue] MyTV */
+ { 0x001a, KEY_REWIND }, /* REW [<<] */
+ { 0x001b, KEY_PLAY }, /* PLAY */
+ { 0x001c, KEY_5 },
+ { 0x001d, KEY_9 },
+ { 0x001e, KEY_VOLUMEDOWN },
+ { 0x001f, KEY_1 },
+ { 0x0040, KEY_STOP }, /* STOP */
+ { 0x0042, KEY_PAUSE }, /* PAUSE */
+ { 0x0043, KEY_SCREEN }, /* Aspect */
+ { 0x0044, KEY_FORWARD }, /* FWD [>>] */
+ { 0x0045, KEY_NEXT }, /* SKIP */
+ { 0x0048, KEY_RECORD }, /* RECORD */
+ { 0x0049, KEY_VIDEO }, /* RTV */
+ { 0x004a, KEY_EPG }, /* Guide */
+ { 0x004b, KEY_CHANNELUP },
+ { 0x004c, KEY_HELP }, /* Help */
+ { 0x004d, KEY_RADIO }, /* Radio */
+ { 0x004f, KEY_CHANNELDOWN },
+ { 0x0050, KEY_DVD }, /* DVD */
+ { 0x0051, KEY_AUDIO }, /* Audio */
+ { 0x0052, KEY_TITLE }, /* Title */
+ { 0x0053, KEY_NEW }, /* [symbol PIP?] */
+ { 0x0057, KEY_MENU }, /* Mouse */
+ { 0x005a, KEY_PREVIOUS }, /* REPLAY */
+};
+
+static struct rc_keymap digitalnow_tinytwin_map = {
+ .map = {
+ .scan = digitalnow_tinytwin,
+ .size = ARRAY_SIZE(digitalnow_tinytwin),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_DIGITALNOW_TINYTWIN,
+ }
+};
+
+static int __init init_rc_map_digitalnow_tinytwin(void)
+{
+ return ir_register_map(&digitalnow_tinytwin_map);
+}
+
+static void __exit exit_rc_map_digitalnow_tinytwin(void)
+{
+ ir_unregister_map(&digitalnow_tinytwin_map);
+}
+
+module_init(init_rc_map_digitalnow_tinytwin)
+module_exit(exit_rc_map_digitalnow_tinytwin)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/*
+ * Digittrade DVB-T USB Stick remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* Digittrade DVB-T USB Stick remote controller. */
+/* Imported from af9015.h.
+ Initial keytable was from Alain Kalker <miki@dds.nl> */
+
+/* Digittrade DVB-T USB Stick */
+static struct ir_scancode digittrade[] = {
+ { 0x0000, KEY_9 },
+ { 0x0001, KEY_EPG }, /* EPG */
+ { 0x0002, KEY_VOLUMEDOWN }, /* Vol Dn */
+ { 0x0003, KEY_TEXT }, /* TELETEXT */
+ { 0x0004, KEY_8 },
+ { 0x0005, KEY_MUTE }, /* MUTE */
+ { 0x0006, KEY_POWER2 }, /* POWER */
+ { 0x0009, KEY_ZOOM }, /* FULLSCREEN */
+ { 0x000a, KEY_RECORD }, /* RECORD */
+ { 0x000d, KEY_SUBTITLE }, /* SUBTITLE */
+ { 0x000e, KEY_STOP }, /* STOP */
+ { 0x0010, KEY_OK }, /* RETURN */
+ { 0x0011, KEY_2 },
+ { 0x0012, KEY_4 },
+ { 0x0015, KEY_3 },
+ { 0x0016, KEY_5 },
+ { 0x0017, KEY_CHANNELDOWN }, /* Ch Dn */
+ { 0x0019, KEY_CHANNELUP }, /* CH Up */
+ { 0x001a, KEY_PAUSE }, /* PAUSE */
+ { 0x001b, KEY_1 },
+ { 0x001d, KEY_AUDIO }, /* DUAL SOUND */
+ { 0x001e, KEY_PLAY }, /* PLAY */
+ { 0x001f, KEY_CAMERA }, /* SNAPSHOT */
+ { 0x0040, KEY_VOLUMEUP }, /* Vol Up */
+ { 0x0048, KEY_7 },
+ { 0x004c, KEY_6 },
+ { 0x004d, KEY_PLAYPAUSE }, /* TIMESHIFT */
+ { 0x0054, KEY_0 },
+};
+
+static struct rc_keymap digittrade_map = {
+ .map = {
+ .scan = digittrade,
+ .size = ARRAY_SIZE(digittrade),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_DIGITTRADE,
+ }
+};
+
+static int __init init_rc_map_digittrade(void)
+{
+ return ir_register_map(&digittrade_map);
+}
+
+static void __exit exit_rc_map_digittrade(void)
+{
+ ir_unregister_map(&digittrade_map);
+}
+
+module_init(init_rc_map_digittrade)
+module_exit(exit_rc_map_digittrade)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/* dm1105-nec.h - Keytable for dm1105_nec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* DVBWorld remotes
+ Igor M. Liplianin <liplianin@me.by>
+ */
+
+static struct ir_scancode dm1105_nec[] = {
+ { 0x0a, KEY_POWER2}, /* power */
+ { 0x0c, KEY_MUTE}, /* mute */
+ { 0x11, KEY_1},
+ { 0x12, KEY_2},
+ { 0x13, KEY_3},
+ { 0x14, KEY_4},
+ { 0x15, KEY_5},
+ { 0x16, KEY_6},
+ { 0x17, KEY_7},
+ { 0x18, KEY_8},
+ { 0x19, KEY_9},
+ { 0x10, KEY_0},
+ { 0x1c, KEY_CHANNELUP}, /* ch+ */
+ { 0x0f, KEY_CHANNELDOWN}, /* ch- */
+ { 0x1a, KEY_VOLUMEUP}, /* vol+ */
+ { 0x0e, KEY_VOLUMEDOWN}, /* vol- */
+ { 0x04, KEY_RECORD}, /* rec */
+ { 0x09, KEY_CHANNEL}, /* fav */
+ { 0x08, KEY_BACKSPACE}, /* rewind */
+ { 0x07, KEY_FASTFORWARD}, /* fast */
+ { 0x0b, KEY_PAUSE}, /* pause */
+ { 0x02, KEY_ESC}, /* cancel */
+ { 0x03, KEY_TAB}, /* tab */
+ { 0x00, KEY_UP}, /* up */
+ { 0x1f, KEY_ENTER}, /* ok */
+ { 0x01, KEY_DOWN}, /* down */
+ { 0x05, KEY_RECORD}, /* cap */
+ { 0x06, KEY_STOP}, /* stop */
+ { 0x40, KEY_ZOOM}, /* full */
+ { 0x1e, KEY_TV}, /* tvmode */
+ { 0x1b, KEY_B}, /* recall */
+};
+
+static struct rc_keymap dm1105_nec_map = {
+ .map = {
+ .scan = dm1105_nec,
+ .size = ARRAY_SIZE(dm1105_nec),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_DM1105_NEC,
+ }
+};
+
+static int __init init_rc_map_dm1105_nec(void)
+{
+ return ir_register_map(&dm1105_nec_map);
+}
+
+static void __exit exit_rc_map_dm1105_nec(void)
+{
+ ir_unregister_map(&dm1105_nec_map);
+}
+
+module_init(init_rc_map_dm1105_nec)
+module_exit(exit_rc_map_dm1105_nec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* dntv-live-dvb-t.h - Keytable for dntv_live_dvb_t Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* DigitalNow DNTV Live DVB-T Remote */
+
+static struct ir_scancode dntv_live_dvb_t[] = {
+ { 0x00, KEY_ESC }, /* 'go up a level?' */
+ /* Keys 0 to 9 */
+ { 0x0a, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ { 0x0b, KEY_TUNER }, /* tv/fm */
+ { 0x0c, KEY_SEARCH }, /* scan */
+ { 0x0d, KEY_STOP },
+ { 0x0e, KEY_PAUSE },
+ { 0x0f, KEY_LIST }, /* source */
+
+ { 0x10, KEY_MUTE },
+ { 0x11, KEY_REWIND }, /* backward << */
+ { 0x12, KEY_POWER },
+ { 0x13, KEY_CAMERA }, /* snap */
+ { 0x14, KEY_AUDIO }, /* stereo */
+ { 0x15, KEY_CLEAR }, /* reset */
+ { 0x16, KEY_PLAY },
+ { 0x17, KEY_ENTER },
+ { 0x18, KEY_ZOOM }, /* full screen */
+ { 0x19, KEY_FASTFORWARD }, /* forward >> */
+ { 0x1a, KEY_CHANNELUP },
+ { 0x1b, KEY_VOLUMEUP },
+ { 0x1c, KEY_INFO }, /* preview */
+ { 0x1d, KEY_RECORD }, /* record */
+ { 0x1e, KEY_CHANNELDOWN },
+ { 0x1f, KEY_VOLUMEDOWN },
+};
+
+static struct rc_keymap dntv_live_dvb_t_map = {
+ .map = {
+ .scan = dntv_live_dvb_t,
+ .size = ARRAY_SIZE(dntv_live_dvb_t),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_DNTV_LIVE_DVB_T,
+ }
+};
+
+static int __init init_rc_map_dntv_live_dvb_t(void)
+{
+ return ir_register_map(&dntv_live_dvb_t_map);
+}
+
+static void __exit exit_rc_map_dntv_live_dvb_t(void)
+{
+ ir_unregister_map(&dntv_live_dvb_t_map);
+}
+
+module_init(init_rc_map_dntv_live_dvb_t)
+module_exit(exit_rc_map_dntv_live_dvb_t)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* dntv-live-dvbt-pro.h - Keytable for dntv_live_dvbt_pro Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* DigitalNow DNTV Live! DVB-T Pro Remote */
+
+static struct ir_scancode dntv_live_dvbt_pro[] = {
+ { 0x16, KEY_POWER },
+ { 0x5b, KEY_HOME },
+
+ { 0x55, KEY_TV }, /* live tv */
+ { 0x58, KEY_TUNER }, /* digital Radio */
+ { 0x5a, KEY_RADIO }, /* FM radio */
+ { 0x59, KEY_DVD }, /* dvd menu */
+ { 0x03, KEY_1 },
+ { 0x01, KEY_2 },
+ { 0x06, KEY_3 },
+ { 0x09, KEY_4 },
+ { 0x1d, KEY_5 },
+ { 0x1f, KEY_6 },
+ { 0x0d, KEY_7 },
+ { 0x19, KEY_8 },
+ { 0x1b, KEY_9 },
+ { 0x0c, KEY_CANCEL },
+ { 0x15, KEY_0 },
+ { 0x4a, KEY_CLEAR },
+ { 0x13, KEY_BACK },
+ { 0x00, KEY_TAB },
+ { 0x4b, KEY_UP },
+ { 0x4e, KEY_LEFT },
+ { 0x4f, KEY_OK },
+ { 0x52, KEY_RIGHT },
+ { 0x51, KEY_DOWN },
+ { 0x1e, KEY_VOLUMEUP },
+ { 0x0a, KEY_VOLUMEDOWN },
+ { 0x02, KEY_CHANNELDOWN },
+ { 0x05, KEY_CHANNELUP },
+ { 0x11, KEY_RECORD },
+ { 0x14, KEY_PLAY },
+ { 0x4c, KEY_PAUSE },
+ { 0x1a, KEY_STOP },
+ { 0x40, KEY_REWIND },
+ { 0x12, KEY_FASTFORWARD },
+ { 0x41, KEY_PREVIOUSSONG }, /* replay |< */
+ { 0x42, KEY_NEXTSONG }, /* skip >| */
+ { 0x54, KEY_CAMERA }, /* capture */
+ { 0x50, KEY_LANGUAGE }, /* sap */
+ { 0x47, KEY_TV2 }, /* pip */
+ { 0x4d, KEY_SCREEN },
+ { 0x43, KEY_SUBTITLE },
+ { 0x10, KEY_MUTE },
+ { 0x49, KEY_AUDIO }, /* l/r */
+ { 0x07, KEY_SLEEP },
+ { 0x08, KEY_VIDEO }, /* a/v */
+ { 0x0e, KEY_PREVIOUS }, /* recall */
+ { 0x45, KEY_ZOOM }, /* zoom + */
+ { 0x46, KEY_ANGLE }, /* zoom - */
+ { 0x56, KEY_RED },
+ { 0x57, KEY_GREEN },
+ { 0x5c, KEY_YELLOW },
+ { 0x5d, KEY_BLUE },
+};
+
+static struct rc_keymap dntv_live_dvbt_pro_map = {
+ .map = {
+ .scan = dntv_live_dvbt_pro,
+ .size = ARRAY_SIZE(dntv_live_dvbt_pro),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_DNTV_LIVE_DVBT_PRO,
+ }
+};
+
+static int __init init_rc_map_dntv_live_dvbt_pro(void)
+{
+ return ir_register_map(&dntv_live_dvbt_pro_map);
+}
+
+static void __exit exit_rc_map_dntv_live_dvbt_pro(void)
+{
+ ir_unregister_map(&dntv_live_dvbt_pro_map);
+}
+
+module_init(init_rc_map_dntv_live_dvbt_pro)
+module_exit(exit_rc_map_dntv_live_dvbt_pro)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* em-terratec.h - Keytable for em_terratec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode em_terratec[] = {
+ { 0x01, KEY_CHANNEL },
+ { 0x02, KEY_SELECT },
+ { 0x03, KEY_MUTE },
+ { 0x04, KEY_POWER },
+ { 0x05, KEY_1 },
+ { 0x06, KEY_2 },
+ { 0x07, KEY_3 },
+ { 0x08, KEY_CHANNELUP },
+ { 0x09, KEY_4 },
+ { 0x0a, KEY_5 },
+ { 0x0b, KEY_6 },
+ { 0x0c, KEY_CHANNELDOWN },
+ { 0x0d, KEY_7 },
+ { 0x0e, KEY_8 },
+ { 0x0f, KEY_9 },
+ { 0x10, KEY_VOLUMEUP },
+ { 0x11, KEY_0 },
+ { 0x12, KEY_MENU },
+ { 0x13, KEY_PRINT },
+ { 0x14, KEY_VOLUMEDOWN },
+ { 0x16, KEY_PAUSE },
+ { 0x18, KEY_RECORD },
+ { 0x19, KEY_REWIND },
+ { 0x1a, KEY_PLAY },
+ { 0x1b, KEY_FORWARD },
+ { 0x1c, KEY_BACKSPACE },
+ { 0x1e, KEY_STOP },
+ { 0x40, KEY_ZOOM },
+};
+
+static struct rc_keymap em_terratec_map = {
+ .map = {
+ .scan = em_terratec,
+ .size = ARRAY_SIZE(em_terratec),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_EM_TERRATEC,
+ }
+};
+
+static int __init init_rc_map_em_terratec(void)
+{
+ return ir_register_map(&em_terratec_map);
+}
+
+static void __exit exit_rc_map_em_terratec(void)
+{
+ ir_unregister_map(&em_terratec_map);
+}
+
+module_init(init_rc_map_em_terratec)
+module_exit(exit_rc_map_em_terratec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* encore-enltv-fm53.h - Keytable for encore_enltv_fm53 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Encore ENLTV-FM v5.3
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+
+static struct ir_scancode encore_enltv_fm53[] = {
+ { 0x10, KEY_POWER2},
+ { 0x06, KEY_MUTE},
+
+ { 0x09, KEY_1},
+ { 0x1d, KEY_2},
+ { 0x1f, KEY_3},
+ { 0x19, KEY_4},
+ { 0x1b, KEY_5},
+ { 0x11, KEY_6},
+ { 0x17, KEY_7},
+ { 0x12, KEY_8},
+ { 0x16, KEY_9},
+ { 0x48, KEY_0},
+
+ { 0x04, KEY_LIST}, /* -/-- */
+ { 0x40, KEY_LAST}, /* recall */
+
+ { 0x02, KEY_MODE}, /* TV/AV */
+ { 0x05, KEY_CAMERA}, /* SNAPSHOT */
+
+ { 0x4c, KEY_CHANNELUP}, /* UP */
+ { 0x00, KEY_CHANNELDOWN}, /* DOWN */
+ { 0x0d, KEY_VOLUMEUP}, /* RIGHT */
+ { 0x15, KEY_VOLUMEDOWN}, /* LEFT */
+ { 0x49, KEY_ENTER}, /* OK */
+
+ { 0x54, KEY_RECORD},
+ { 0x4d, KEY_PLAY}, /* pause */
+
+ { 0x1e, KEY_MENU}, /* video setting */
+ { 0x0e, KEY_RIGHT}, /* <- */
+ { 0x1a, KEY_LEFT}, /* -> */
+
+ { 0x0a, KEY_CLEAR}, /* video default */
+ { 0x0c, KEY_ZOOM}, /* hide pannel */
+ { 0x47, KEY_SLEEP}, /* shutdown */
+};
+
+static struct rc_keymap encore_enltv_fm53_map = {
+ .map = {
+ .scan = encore_enltv_fm53,
+ .size = ARRAY_SIZE(encore_enltv_fm53),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_ENCORE_ENLTV_FM53,
+ }
+};
+
+static int __init init_rc_map_encore_enltv_fm53(void)
+{
+ return ir_register_map(&encore_enltv_fm53_map);
+}
+
+static void __exit exit_rc_map_encore_enltv_fm53(void)
+{
+ ir_unregister_map(&encore_enltv_fm53_map);
+}
+
+module_init(init_rc_map_encore_enltv_fm53)
+module_exit(exit_rc_map_encore_enltv_fm53)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* encore-enltv.h - Keytable for encore_enltv Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Encore ENLTV-FM - black plastic, white front cover with white glowing buttons
+ Juan Pablo Sormani <sorman@gmail.com> */
+
+static struct ir_scancode encore_enltv[] = {
+
+ /* Power button does nothing, neither in Windows app,
+ although it sends data (used for BIOS wakeup?) */
+ { 0x0d, KEY_MUTE },
+
+ { 0x1e, KEY_TV },
+ { 0x00, KEY_VIDEO },
+ { 0x01, KEY_AUDIO }, /* music */
+ { 0x02, KEY_MHP }, /* picture */
+
+ { 0x1f, KEY_1 },
+ { 0x03, KEY_2 },
+ { 0x04, KEY_3 },
+ { 0x05, KEY_4 },
+ { 0x1c, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x1d, KEY_9 },
+ { 0x0a, KEY_0 },
+
+ { 0x09, KEY_LIST }, /* -/-- */
+ { 0x0b, KEY_LAST }, /* recall */
+
+ { 0x14, KEY_HOME }, /* win start menu */
+ { 0x15, KEY_EXIT }, /* exit */
+ { 0x16, KEY_CHANNELUP }, /* UP */
+ { 0x12, KEY_CHANNELDOWN }, /* DOWN */
+ { 0x0c, KEY_VOLUMEUP }, /* RIGHT */
+ { 0x17, KEY_VOLUMEDOWN }, /* LEFT */
+
+ { 0x18, KEY_ENTER }, /* OK */
+
+ { 0x0e, KEY_ESC },
+ { 0x13, KEY_CYCLEWINDOWS }, /* desktop */
+ { 0x11, KEY_TAB },
+ { 0x19, KEY_SWITCHVIDEOMODE }, /* switch */
+
+ { 0x1a, KEY_MENU },
+ { 0x1b, KEY_ZOOM }, /* fullscreen */
+ { 0x44, KEY_TIME }, /* time shift */
+ { 0x40, KEY_MODE }, /* source */
+
+ { 0x5a, KEY_RECORD },
+ { 0x42, KEY_PLAY }, /* play/pause */
+ { 0x45, KEY_STOP },
+ { 0x43, KEY_CAMERA }, /* camera icon */
+
+ { 0x48, KEY_REWIND },
+ { 0x4a, KEY_FASTFORWARD },
+ { 0x49, KEY_PREVIOUS },
+ { 0x4b, KEY_NEXT },
+
+ { 0x4c, KEY_FAVORITES }, /* tv wall */
+ { 0x4d, KEY_SOUND }, /* DVD sound */
+ { 0x4e, KEY_LANGUAGE }, /* DVD lang */
+ { 0x4f, KEY_TEXT }, /* DVD text */
+
+ { 0x50, KEY_SLEEP }, /* shutdown */
+ { 0x51, KEY_MODE }, /* stereo > main */
+ { 0x52, KEY_SELECT }, /* stereo > sap */
+ { 0x53, KEY_PROG1 }, /* teletext */
+
+
+ { 0x59, KEY_RED }, /* AP1 */
+ { 0x41, KEY_GREEN }, /* AP2 */
+ { 0x47, KEY_YELLOW }, /* AP3 */
+ { 0x57, KEY_BLUE }, /* AP4 */
+};
+
+static struct rc_keymap encore_enltv_map = {
+ .map = {
+ .scan = encore_enltv,
+ .size = ARRAY_SIZE(encore_enltv),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_ENCORE_ENLTV,
+ }
+};
+
+static int __init init_rc_map_encore_enltv(void)
+{
+ return ir_register_map(&encore_enltv_map);
+}
+
+static void __exit exit_rc_map_encore_enltv(void)
+{
+ ir_unregister_map(&encore_enltv_map);
+}
+
+module_init(init_rc_map_encore_enltv)
+module_exit(exit_rc_map_encore_enltv)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* encore-enltv2.h - Keytable for encore_enltv2 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Encore ENLTV2-FM - silver plastic - "Wand Media" written at the botton
+ Mauro Carvalho Chehab <mchehab@infradead.org> */
+
+static struct ir_scancode encore_enltv2[] = {
+ { 0x4c, KEY_POWER2 },
+ { 0x4a, KEY_TUNER },
+ { 0x40, KEY_1 },
+ { 0x60, KEY_2 },
+ { 0x50, KEY_3 },
+ { 0x70, KEY_4 },
+ { 0x48, KEY_5 },
+ { 0x68, KEY_6 },
+ { 0x58, KEY_7 },
+ { 0x78, KEY_8 },
+ { 0x44, KEY_9 },
+ { 0x54, KEY_0 },
+
+ { 0x64, KEY_LAST }, /* +100 */
+ { 0x4e, KEY_AGAIN }, /* Recall */
+
+ { 0x6c, KEY_SWITCHVIDEOMODE }, /* Video Source */
+ { 0x5e, KEY_MENU },
+ { 0x56, KEY_SCREEN },
+ { 0x7a, KEY_SETUP },
+
+ { 0x46, KEY_MUTE },
+ { 0x5c, KEY_MODE }, /* Stereo */
+ { 0x74, KEY_INFO },
+ { 0x7c, KEY_CLEAR },
+
+ { 0x55, KEY_UP },
+ { 0x49, KEY_DOWN },
+ { 0x7e, KEY_LEFT },
+ { 0x59, KEY_RIGHT },
+ { 0x6a, KEY_ENTER },
+
+ { 0x42, KEY_VOLUMEUP },
+ { 0x62, KEY_VOLUMEDOWN },
+ { 0x52, KEY_CHANNELUP },
+ { 0x72, KEY_CHANNELDOWN },
+
+ { 0x41, KEY_RECORD },
+ { 0x51, KEY_CAMERA }, /* Snapshot */
+ { 0x75, KEY_TIME }, /* Timeshift */
+ { 0x71, KEY_TV2 }, /* PIP */
+
+ { 0x45, KEY_REWIND },
+ { 0x6f, KEY_PAUSE },
+ { 0x7d, KEY_FORWARD },
+ { 0x79, KEY_STOP },
+};
+
+static struct rc_keymap encore_enltv2_map = {
+ .map = {
+ .scan = encore_enltv2,
+ .size = ARRAY_SIZE(encore_enltv2),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_ENCORE_ENLTV2,
+ }
+};
+
+static int __init init_rc_map_encore_enltv2(void)
+{
+ return ir_register_map(&encore_enltv2_map);
+}
+
+static void __exit exit_rc_map_encore_enltv2(void)
+{
+ ir_unregister_map(&encore_enltv2_map);
+}
+
+module_init(init_rc_map_encore_enltv2)
+module_exit(exit_rc_map_encore_enltv2)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* evga-indtube.h - Keytable for evga_indtube Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* EVGA inDtube
+ Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+
+static struct ir_scancode evga_indtube[] = {
+ { 0x12, KEY_POWER},
+ { 0x02, KEY_MODE}, /* TV */
+ { 0x14, KEY_MUTE},
+ { 0x1a, KEY_CHANNELUP},
+ { 0x16, KEY_TV2}, /* PIP */
+ { 0x1d, KEY_VOLUMEUP},
+ { 0x05, KEY_CHANNELDOWN},
+ { 0x0f, KEY_PLAYPAUSE},
+ { 0x19, KEY_VOLUMEDOWN},
+ { 0x1c, KEY_REWIND},
+ { 0x0d, KEY_RECORD},
+ { 0x18, KEY_FORWARD},
+ { 0x1e, KEY_PREVIOUS},
+ { 0x1b, KEY_STOP},
+ { 0x1f, KEY_NEXT},
+ { 0x13, KEY_CAMERA},
+};
+
+static struct rc_keymap evga_indtube_map = {
+ .map = {
+ .scan = evga_indtube,
+ .size = ARRAY_SIZE(evga_indtube),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_EVGA_INDTUBE,
+ }
+};
+
+static int __init init_rc_map_evga_indtube(void)
+{
+ return ir_register_map(&evga_indtube_map);
+}
+
+static void __exit exit_rc_map_evga_indtube(void)
+{
+ ir_unregister_map(&evga_indtube_map);
+}
+
+module_init(init_rc_map_evga_indtube)
+module_exit(exit_rc_map_evga_indtube)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* eztv.h - Keytable for eztv Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Alfons Geser <a.geser@cox.net>
+ * updates from Job D. R. Borges <jobdrb@ig.com.br> */
+
+static struct ir_scancode eztv[] = {
+ { 0x12, KEY_POWER },
+ { 0x01, KEY_TV }, /* DVR */
+ { 0x15, KEY_DVD }, /* DVD */
+ { 0x17, KEY_AUDIO }, /* music */
+ /* DVR mode / DVD mode / music mode */
+
+ { 0x1b, KEY_MUTE }, /* mute */
+ { 0x02, KEY_LANGUAGE }, /* MTS/SAP / audio / autoseek */
+ { 0x1e, KEY_SUBTITLE }, /* closed captioning / subtitle / seek */
+ { 0x16, KEY_ZOOM }, /* full screen */
+ { 0x1c, KEY_VIDEO }, /* video source / eject / delall */
+ { 0x1d, KEY_RESTART }, /* playback / angle / del */
+ { 0x2f, KEY_SEARCH }, /* scan / menu / playlist */
+ { 0x30, KEY_CHANNEL }, /* CH surfing / bookmark / memo */
+
+ { 0x31, KEY_HELP }, /* help */
+ { 0x32, KEY_MODE }, /* num/memo */
+ { 0x33, KEY_ESC }, /* cancel */
+
+ { 0x0c, KEY_UP }, /* up */
+ { 0x10, KEY_DOWN }, /* down */
+ { 0x08, KEY_LEFT }, /* left */
+ { 0x04, KEY_RIGHT }, /* right */
+ { 0x03, KEY_SELECT }, /* select */
+
+ { 0x1f, KEY_REWIND }, /* rewind */
+ { 0x20, KEY_PLAYPAUSE },/* play/pause */
+ { 0x29, KEY_FORWARD }, /* forward */
+ { 0x14, KEY_AGAIN }, /* repeat */
+ { 0x2b, KEY_RECORD }, /* recording */
+ { 0x2c, KEY_STOP }, /* stop */
+ { 0x2d, KEY_PLAY }, /* play */
+ { 0x2e, KEY_CAMERA }, /* snapshot / shuffle */
+
+ { 0x00, KEY_0 },
+ { 0x05, KEY_1 },
+ { 0x06, KEY_2 },
+ { 0x07, KEY_3 },
+ { 0x09, KEY_4 },
+ { 0x0a, KEY_5 },
+ { 0x0b, KEY_6 },
+ { 0x0d, KEY_7 },
+ { 0x0e, KEY_8 },
+ { 0x0f, KEY_9 },
+
+ { 0x2a, KEY_VOLUMEUP },
+ { 0x11, KEY_VOLUMEDOWN },
+ { 0x18, KEY_CHANNELUP },/* CH.tracking up */
+ { 0x19, KEY_CHANNELDOWN },/* CH.tracking down */
+
+ { 0x13, KEY_ENTER }, /* enter */
+ { 0x21, KEY_DOT }, /* . (decimal dot) */
+};
+
+static struct rc_keymap eztv_map = {
+ .map = {
+ .scan = eztv,
+ .size = ARRAY_SIZE(eztv),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_EZTV,
+ }
+};
+
+static int __init init_rc_map_eztv(void)
+{
+ return ir_register_map(&eztv_map);
+}
+
+static void __exit exit_rc_map_eztv(void)
+{
+ ir_unregister_map(&eztv_map);
+}
+
+module_init(init_rc_map_eztv)
+module_exit(exit_rc_map_eztv)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* flydvb.h - Keytable for flydvb Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode flydvb[] = {
+ { 0x01, KEY_ZOOM }, /* Full Screen */
+ { 0x00, KEY_POWER }, /* Power */
+
+ { 0x03, KEY_1 },
+ { 0x04, KEY_2 },
+ { 0x05, KEY_3 },
+ { 0x07, KEY_4 },
+ { 0x08, KEY_5 },
+ { 0x09, KEY_6 },
+ { 0x0b, KEY_7 },
+ { 0x0c, KEY_8 },
+ { 0x0d, KEY_9 },
+ { 0x06, KEY_AGAIN }, /* Recall */
+ { 0x0f, KEY_0 },
+ { 0x10, KEY_MUTE }, /* Mute */
+ { 0x02, KEY_RADIO }, /* TV/Radio */
+ { 0x1b, KEY_LANGUAGE }, /* SAP (Second Audio Program) */
+
+ { 0x14, KEY_VOLUMEUP }, /* VOL+ */
+ { 0x17, KEY_VOLUMEDOWN }, /* VOL- */
+ { 0x12, KEY_CHANNELUP }, /* CH+ */
+ { 0x13, KEY_CHANNELDOWN }, /* CH- */
+ { 0x1d, KEY_ENTER }, /* Enter */
+
+ { 0x1a, KEY_MODE }, /* PIP */
+ { 0x18, KEY_TUNER }, /* Source */
+
+ { 0x1e, KEY_RECORD }, /* Record/Pause */
+ { 0x15, KEY_ANGLE }, /* Swap (no label on key) */
+ { 0x1c, KEY_PAUSE }, /* Timeshift/Pause */
+ { 0x19, KEY_BACK }, /* Rewind << */
+ { 0x0a, KEY_PLAYPAUSE }, /* Play/Pause */
+ { 0x1f, KEY_FORWARD }, /* Forward >> */
+ { 0x16, KEY_PREVIOUS }, /* Back |<< */
+ { 0x11, KEY_STOP }, /* Stop */
+ { 0x0e, KEY_NEXT }, /* End >>| */
+};
+
+static struct rc_keymap flydvb_map = {
+ .map = {
+ .scan = flydvb,
+ .size = ARRAY_SIZE(flydvb),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_FLYDVB,
+ }
+};
+
+static int __init init_rc_map_flydvb(void)
+{
+ return ir_register_map(&flydvb_map);
+}
+
+static void __exit exit_rc_map_flydvb(void)
+{
+ ir_unregister_map(&flydvb_map);
+}
+
+module_init(init_rc_map_flydvb)
+module_exit(exit_rc_map_flydvb)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* flyvideo.h - Keytable for flyvideo Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode flyvideo[] = {
+ { 0x0f, KEY_0 },
+ { 0x03, KEY_1 },
+ { 0x04, KEY_2 },
+ { 0x05, KEY_3 },
+ { 0x07, KEY_4 },
+ { 0x08, KEY_5 },
+ { 0x09, KEY_6 },
+ { 0x0b, KEY_7 },
+ { 0x0c, KEY_8 },
+ { 0x0d, KEY_9 },
+
+ { 0x0e, KEY_MODE }, /* Air/Cable */
+ { 0x11, KEY_VIDEO }, /* Video */
+ { 0x15, KEY_AUDIO }, /* Audio */
+ { 0x00, KEY_POWER }, /* Power */
+ { 0x18, KEY_TUNER }, /* AV Source */
+ { 0x02, KEY_ZOOM }, /* Fullscreen */
+ { 0x1a, KEY_LANGUAGE }, /* Stereo */
+ { 0x1b, KEY_MUTE }, /* Mute */
+ { 0x14, KEY_VOLUMEUP }, /* Volume + */
+ { 0x17, KEY_VOLUMEDOWN },/* Volume - */
+ { 0x12, KEY_CHANNELUP },/* Channel + */
+ { 0x13, KEY_CHANNELDOWN },/* Channel - */
+ { 0x06, KEY_AGAIN }, /* Recall */
+ { 0x10, KEY_ENTER }, /* Enter */
+
+ { 0x19, KEY_BACK }, /* Rewind ( <<< ) */
+ { 0x1f, KEY_FORWARD }, /* Forward ( >>> ) */
+ { 0x0a, KEY_ANGLE }, /* no label, may be used as the PAUSE button */
+};
+
+static struct rc_keymap flyvideo_map = {
+ .map = {
+ .scan = flyvideo,
+ .size = ARRAY_SIZE(flyvideo),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_FLYVIDEO,
+ }
+};
+
+static int __init init_rc_map_flyvideo(void)
+{
+ return ir_register_map(&flyvideo_map);
+}
+
+static void __exit exit_rc_map_flyvideo(void)
+{
+ ir_unregister_map(&flyvideo_map);
+}
+
+module_init(init_rc_map_flyvideo)
+module_exit(exit_rc_map_flyvideo)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* fusionhdtv-mce.h - Keytable for fusionhdtv_mce Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* DViCO FUSION HDTV MCE remote */
+
+static struct ir_scancode fusionhdtv_mce[] = {
+
+ { 0x0b, KEY_1 },
+ { 0x17, KEY_2 },
+ { 0x1b, KEY_3 },
+ { 0x07, KEY_4 },
+ { 0x50, KEY_5 },
+ { 0x54, KEY_6 },
+ { 0x48, KEY_7 },
+ { 0x4c, KEY_8 },
+ { 0x58, KEY_9 },
+ { 0x03, KEY_0 },
+
+ { 0x5e, KEY_OK },
+ { 0x51, KEY_UP },
+ { 0x53, KEY_DOWN },
+ { 0x5b, KEY_LEFT },
+ { 0x5f, KEY_RIGHT },
+
+ { 0x02, KEY_TV }, /* Labeled DTV on remote */
+ { 0x0e, KEY_MP3 },
+ { 0x1a, KEY_DVD },
+ { 0x1e, KEY_FAVORITES }, /* Labeled CPF on remote */
+ { 0x16, KEY_SETUP },
+ { 0x46, KEY_POWER2 }, /* TV On/Off button on remote */
+ { 0x0a, KEY_EPG }, /* Labeled Guide on remote */
+
+ { 0x49, KEY_BACK },
+ { 0x59, KEY_INFO }, /* Labeled MORE on remote */
+ { 0x4d, KEY_MENU }, /* Labeled DVDMENU on remote */
+ { 0x55, KEY_CYCLEWINDOWS }, /* Labeled ALT-TAB on remote */
+
+ { 0x0f, KEY_PREVIOUSSONG }, /* Labeled |<< REPLAY on remote */
+ { 0x12, KEY_NEXTSONG }, /* Labeled >>| SKIP on remote */
+ { 0x42, KEY_ENTER }, /* Labeled START with a green
+ MS windows logo on remote */
+
+ { 0x15, KEY_VOLUMEUP },
+ { 0x05, KEY_VOLUMEDOWN },
+ { 0x11, KEY_CHANNELUP },
+ { 0x09, KEY_CHANNELDOWN },
+
+ { 0x52, KEY_CAMERA },
+ { 0x5a, KEY_TUNER },
+ { 0x19, KEY_OPEN },
+
+ { 0x13, KEY_MODE }, /* 4:3 16:9 select */
+ { 0x1f, KEY_ZOOM },
+
+ { 0x43, KEY_REWIND },
+ { 0x47, KEY_PLAYPAUSE },
+ { 0x4f, KEY_FASTFORWARD },
+ { 0x57, KEY_MUTE },
+ { 0x0d, KEY_STOP },
+ { 0x01, KEY_RECORD },
+ { 0x4e, KEY_POWER },
+};
+
+static struct rc_keymap fusionhdtv_mce_map = {
+ .map = {
+ .scan = fusionhdtv_mce,
+ .size = ARRAY_SIZE(fusionhdtv_mce),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_FUSIONHDTV_MCE,
+ }
+};
+
+static int __init init_rc_map_fusionhdtv_mce(void)
+{
+ return ir_register_map(&fusionhdtv_mce_map);
+}
+
+static void __exit exit_rc_map_fusionhdtv_mce(void)
+{
+ ir_unregister_map(&fusionhdtv_mce_map);
+}
+
+module_init(init_rc_map_fusionhdtv_mce)
+module_exit(exit_rc_map_fusionhdtv_mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* gadmei-rm008z.h - Keytable for gadmei_rm008z Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* GADMEI UTV330+ RM008Z remote
+ Shine Liu <shinel@foxmail.com>
+ */
+
+static struct ir_scancode gadmei_rm008z[] = {
+ { 0x14, KEY_POWER2}, /* POWER OFF */
+ { 0x0c, KEY_MUTE}, /* MUTE */
+
+ { 0x18, KEY_TV}, /* TV */
+ { 0x0e, KEY_VIDEO}, /* AV */
+ { 0x0b, KEY_AUDIO}, /* SV */
+ { 0x0f, KEY_RADIO}, /* FM */
+
+ { 0x00, KEY_1},
+ { 0x01, KEY_2},
+ { 0x02, KEY_3},
+ { 0x03, KEY_4},
+ { 0x04, KEY_5},
+ { 0x05, KEY_6},
+ { 0x06, KEY_7},
+ { 0x07, KEY_8},
+ { 0x08, KEY_9},
+ { 0x09, KEY_0},
+ { 0x0a, KEY_INFO}, /* OSD */
+ { 0x1c, KEY_BACKSPACE}, /* LAST */
+
+ { 0x0d, KEY_PLAY}, /* PLAY */
+ { 0x1e, KEY_CAMERA}, /* SNAPSHOT */
+ { 0x1a, KEY_RECORD}, /* RECORD */
+ { 0x17, KEY_STOP}, /* STOP */
+
+ { 0x1f, KEY_UP}, /* UP */
+ { 0x44, KEY_DOWN}, /* DOWN */
+ { 0x46, KEY_TAB}, /* BACK */
+ { 0x4a, KEY_ZOOM}, /* FULLSECREEN */
+
+ { 0x10, KEY_VOLUMEUP}, /* VOLUMEUP */
+ { 0x11, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */
+ { 0x12, KEY_CHANNELUP}, /* CHANNELUP */
+ { 0x13, KEY_CHANNELDOWN}, /* CHANNELDOWN */
+ { 0x15, KEY_ENTER}, /* OK */
+};
+
+static struct rc_keymap gadmei_rm008z_map = {
+ .map = {
+ .scan = gadmei_rm008z,
+ .size = ARRAY_SIZE(gadmei_rm008z),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_GADMEI_RM008Z,
+ }
+};
+
+static int __init init_rc_map_gadmei_rm008z(void)
+{
+ return ir_register_map(&gadmei_rm008z_map);
+}
+
+static void __exit exit_rc_map_gadmei_rm008z(void)
+{
+ ir_unregister_map(&gadmei_rm008z_map);
+}
+
+module_init(init_rc_map_gadmei_rm008z)
+module_exit(exit_rc_map_gadmei_rm008z)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* genius-tvgo-a11mce.h - Keytable for genius_tvgo_a11mce Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Remote control for the Genius TVGO A11MCE
+ * Adrian Pardini <pardo.bsso@gmail.com>
+ */
+
+static struct ir_scancode genius_tvgo_a11mce[] = {
+ /* Keys 0 to 9 */
+ { 0x48, KEY_0 },
+ { 0x09, KEY_1 },
+ { 0x1d, KEY_2 },
+ { 0x1f, KEY_3 },
+ { 0x19, KEY_4 },
+ { 0x1b, KEY_5 },
+ { 0x11, KEY_6 },
+ { 0x17, KEY_7 },
+ { 0x12, KEY_8 },
+ { 0x16, KEY_9 },
+
+ { 0x54, KEY_RECORD }, /* recording */
+ { 0x06, KEY_MUTE }, /* mute */
+ { 0x10, KEY_POWER },
+ { 0x40, KEY_LAST }, /* recall */
+ { 0x4c, KEY_CHANNELUP }, /* channel / program + */
+ { 0x00, KEY_CHANNELDOWN }, /* channel / program - */
+ { 0x0d, KEY_VOLUMEUP },
+ { 0x15, KEY_VOLUMEDOWN },
+ { 0x4d, KEY_OK }, /* also labeled as Pause */
+ { 0x1c, KEY_ZOOM }, /* full screen and Stop*/
+ { 0x02, KEY_MODE }, /* AV Source or Rewind*/
+ { 0x04, KEY_LIST }, /* -/-- */
+ /* small arrows above numbers */
+ { 0x1a, KEY_NEXT }, /* also Fast Forward */
+ { 0x0e, KEY_PREVIOUS }, /* also Rewind */
+ /* these are in a rather non standard layout and have
+ an alternate name written */
+ { 0x1e, KEY_UP }, /* Video Setting */
+ { 0x0a, KEY_DOWN }, /* Video Default */
+ { 0x05, KEY_CAMERA }, /* Snapshot */
+ { 0x0c, KEY_RIGHT }, /* Hide Panel */
+ /* Four buttons without label */
+ { 0x49, KEY_RED },
+ { 0x0b, KEY_GREEN },
+ { 0x13, KEY_YELLOW },
+ { 0x50, KEY_BLUE },
+};
+
+static struct rc_keymap genius_tvgo_a11mce_map = {
+ .map = {
+ .scan = genius_tvgo_a11mce,
+ .size = ARRAY_SIZE(genius_tvgo_a11mce),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_GENIUS_TVGO_A11MCE,
+ }
+};
+
+static int __init init_rc_map_genius_tvgo_a11mce(void)
+{
+ return ir_register_map(&genius_tvgo_a11mce_map);
+}
+
+static void __exit exit_rc_map_genius_tvgo_a11mce(void)
+{
+ ir_unregister_map(&genius_tvgo_a11mce_map);
+}
+
+module_init(init_rc_map_genius_tvgo_a11mce)
+module_exit(exit_rc_map_genius_tvgo_a11mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* gotview7135.h - Keytable for gotview7135 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Mike Baikov <mike@baikov.com> */
+
+static struct ir_scancode gotview7135[] = {
+
+ { 0x11, KEY_POWER },
+ { 0x35, KEY_TV },
+ { 0x1b, KEY_0 },
+ { 0x29, KEY_1 },
+ { 0x19, KEY_2 },
+ { 0x39, KEY_3 },
+ { 0x1f, KEY_4 },
+ { 0x2c, KEY_5 },
+ { 0x21, KEY_6 },
+ { 0x24, KEY_7 },
+ { 0x18, KEY_8 },
+ { 0x2b, KEY_9 },
+ { 0x3b, KEY_AGAIN }, /* LOOP */
+ { 0x06, KEY_AUDIO },
+ { 0x31, KEY_PRINT }, /* PREVIEW */
+ { 0x3e, KEY_VIDEO },
+ { 0x10, KEY_CHANNELUP },
+ { 0x20, KEY_CHANNELDOWN },
+ { 0x0c, KEY_VOLUMEDOWN },
+ { 0x28, KEY_VOLUMEUP },
+ { 0x08, KEY_MUTE },
+ { 0x26, KEY_SEARCH }, /* SCAN */
+ { 0x3f, KEY_CAMERA }, /* SNAPSHOT */
+ { 0x12, KEY_RECORD },
+ { 0x32, KEY_STOP },
+ { 0x3c, KEY_PLAY },
+ { 0x1d, KEY_REWIND },
+ { 0x2d, KEY_PAUSE },
+ { 0x0d, KEY_FORWARD },
+ { 0x05, KEY_ZOOM }, /*FULL*/
+
+ { 0x2a, KEY_F21 }, /* LIVE TIMESHIFT */
+ { 0x0e, KEY_F22 }, /* MIN TIMESHIFT */
+ { 0x1e, KEY_TIME }, /* TIMESHIFT */
+ { 0x38, KEY_F24 }, /* NORMAL TIMESHIFT */
+};
+
+static struct rc_keymap gotview7135_map = {
+ .map = {
+ .scan = gotview7135,
+ .size = ARRAY_SIZE(gotview7135),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_GOTVIEW7135,
+ }
+};
+
+static int __init init_rc_map_gotview7135(void)
+{
+ return ir_register_map(&gotview7135_map);
+}
+
+static void __exit exit_rc_map_gotview7135(void)
+{
+ ir_unregister_map(&gotview7135_map);
+}
+
+module_init(init_rc_map_gotview7135)
+module_exit(exit_rc_map_gotview7135)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* hauppauge-new.h - Keytable for hauppauge_new Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Hauppauge: the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ * almost rc5 coding, but some non-standard keys */
+
+static struct ir_scancode hauppauge_new[] = {
+ /* Keys 0 to 9 */
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ { 0x0a, KEY_TEXT }, /* keypad asterisk as well */
+ { 0x0b, KEY_RED }, /* red button */
+ { 0x0c, KEY_RADIO },
+ { 0x0d, KEY_MENU },
+ { 0x0e, KEY_SUBTITLE }, /* also the # key */
+ { 0x0f, KEY_MUTE },
+ { 0x10, KEY_VOLUMEUP },
+ { 0x11, KEY_VOLUMEDOWN },
+ { 0x12, KEY_PREVIOUS }, /* previous channel */
+ { 0x14, KEY_UP },
+ { 0x15, KEY_DOWN },
+ { 0x16, KEY_LEFT },
+ { 0x17, KEY_RIGHT },
+ { 0x18, KEY_VIDEO }, /* Videos */
+ { 0x19, KEY_AUDIO }, /* Music */
+ /* 0x1a: Pictures - presume this means
+ "Multimedia Home Platform" -
+ no "PICTURES" key in input.h
+ */
+ { 0x1a, KEY_MHP },
+
+ { 0x1b, KEY_EPG }, /* Guide */
+ { 0x1c, KEY_TV },
+ { 0x1e, KEY_NEXTSONG }, /* skip >| */
+ { 0x1f, KEY_EXIT }, /* back/exit */
+ { 0x20, KEY_CHANNELUP }, /* channel / program + */
+ { 0x21, KEY_CHANNELDOWN }, /* channel / program - */
+ { 0x22, KEY_CHANNEL }, /* source (old black remote) */
+ { 0x24, KEY_PREVIOUSSONG }, /* replay |< */
+ { 0x25, KEY_ENTER }, /* OK */
+ { 0x26, KEY_SLEEP }, /* minimize (old black remote) */
+ { 0x29, KEY_BLUE }, /* blue key */
+ { 0x2e, KEY_GREEN }, /* green button */
+ { 0x30, KEY_PAUSE }, /* pause */
+ { 0x32, KEY_REWIND }, /* backward << */
+ { 0x34, KEY_FASTFORWARD }, /* forward >> */
+ { 0x35, KEY_PLAY },
+ { 0x36, KEY_STOP },
+ { 0x37, KEY_RECORD }, /* recording */
+ { 0x38, KEY_YELLOW }, /* yellow key */
+ { 0x3b, KEY_SELECT }, /* top right button */
+ { 0x3c, KEY_ZOOM }, /* full */
+ { 0x3d, KEY_POWER }, /* system power (green button) */
+};
+
+static struct rc_keymap hauppauge_new_map = {
+ .map = {
+ .scan = hauppauge_new,
+ .size = ARRAY_SIZE(hauppauge_new),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_HAUPPAUGE_NEW,
+ }
+};
+
+static int __init init_rc_map_hauppauge_new(void)
+{
+ return ir_register_map(&hauppauge_new_map);
+}
+
+static void __exit exit_rc_map_hauppauge_new(void)
+{
+ ir_unregister_map(&hauppauge_new_map);
+}
+
+module_init(init_rc_map_hauppauge_new)
+module_exit(exit_rc_map_hauppauge_new)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc5-imon-mce.c - Keytable for Windows Media Center RC-6 remotes for use
+ * with the SoundGraph iMON/Antec Veris hardware IR decoder
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* mce-mode imon mce remote key table */
+static struct ir_scancode imon_mce[] = {
+ /* keys sorted mostly by frequency of use to optimize lookups */
+ { 0x800ff415, KEY_REWIND },
+ { 0x800ff414, KEY_FASTFORWARD },
+ { 0x800ff41b, KEY_PREVIOUS },
+ { 0x800ff41a, KEY_NEXT },
+
+ { 0x800ff416, KEY_PLAY },
+ { 0x800ff418, KEY_PAUSE },
+ { 0x800ff419, KEY_STOP },
+ { 0x800ff417, KEY_RECORD },
+
+ { 0x02000052, KEY_UP },
+ { 0x02000051, KEY_DOWN },
+ { 0x02000050, KEY_LEFT },
+ { 0x0200004f, KEY_RIGHT },
+
+ { 0x800ff41e, KEY_UP },
+ { 0x800ff41f, KEY_DOWN },
+ { 0x800ff420, KEY_LEFT },
+ { 0x800ff421, KEY_RIGHT },
+
+ /* 0x800ff40b also KEY_NUMERIC_POUND on some receivers */
+ { 0x800ff40b, KEY_ENTER },
+ { 0x02000028, KEY_ENTER },
+/* the OK and Enter buttons decode to the same value on some remotes
+ { 0x02000028, KEY_OK }, */
+ { 0x800ff422, KEY_OK },
+ { 0x0200002a, KEY_EXIT },
+ { 0x800ff423, KEY_EXIT },
+ { 0x02000029, KEY_DELETE },
+ /* 0x800ff40a also KEY_NUMERIC_STAR on some receivers */
+ { 0x800ff40a, KEY_DELETE },
+
+ { 0x800ff40e, KEY_MUTE },
+ { 0x800ff410, KEY_VOLUMEUP },
+ { 0x800ff411, KEY_VOLUMEDOWN },
+ { 0x800ff412, KEY_CHANNELUP },
+ { 0x800ff413, KEY_CHANNELDOWN },
+
+ { 0x0200001e, KEY_NUMERIC_1 },
+ { 0x0200001f, KEY_NUMERIC_2 },
+ { 0x02000020, KEY_NUMERIC_3 },
+ { 0x02000021, KEY_NUMERIC_4 },
+ { 0x02000022, KEY_NUMERIC_5 },
+ { 0x02000023, KEY_NUMERIC_6 },
+ { 0x02000024, KEY_NUMERIC_7 },
+ { 0x02000025, KEY_NUMERIC_8 },
+ { 0x02000026, KEY_NUMERIC_9 },
+ { 0x02000027, KEY_NUMERIC_0 },
+
+ { 0x800ff401, KEY_NUMERIC_1 },
+ { 0x800ff402, KEY_NUMERIC_2 },
+ { 0x800ff403, KEY_NUMERIC_3 },
+ { 0x800ff404, KEY_NUMERIC_4 },
+ { 0x800ff405, KEY_NUMERIC_5 },
+ { 0x800ff406, KEY_NUMERIC_6 },
+ { 0x800ff407, KEY_NUMERIC_7 },
+ { 0x800ff408, KEY_NUMERIC_8 },
+ { 0x800ff409, KEY_NUMERIC_9 },
+ { 0x800ff400, KEY_NUMERIC_0 },
+
+ { 0x02200025, KEY_NUMERIC_STAR },
+ { 0x02200020, KEY_NUMERIC_POUND },
+ /* 0x800ff41d also KEY_BLUE on some receivers */
+ { 0x800ff41d, KEY_NUMERIC_STAR },
+ /* 0x800ff41c also KEY_PREVIOUS on some receivers */
+ { 0x800ff41c, KEY_NUMERIC_POUND },
+
+ { 0x800ff446, KEY_TV },
+ { 0x800ff447, KEY_AUDIO }, /* My Music */
+ { 0x800ff448, KEY_PVR }, /* RecordedTV */
+ { 0x800ff449, KEY_CAMERA },
+ { 0x800ff44a, KEY_VIDEO },
+ /* 0x800ff424 also KEY_MENU on some receivers */
+ { 0x800ff424, KEY_DVD },
+ /* 0x800ff425 also KEY_GREEN on some receivers */
+ { 0x800ff425, KEY_TUNER }, /* LiveTV */
+ { 0x800ff450, KEY_RADIO },
+
+ { 0x800ff44c, KEY_LANGUAGE },
+ { 0x800ff427, KEY_ZOOM }, /* Aspect */
+
+ { 0x800ff45b, KEY_RED },
+ { 0x800ff45c, KEY_GREEN },
+ { 0x800ff45d, KEY_YELLOW },
+ { 0x800ff45e, KEY_BLUE },
+
+ { 0x800ff466, KEY_RED },
+ /* { 0x800ff425, KEY_GREEN }, */
+ { 0x800ff468, KEY_YELLOW },
+ /* { 0x800ff41d, KEY_BLUE }, */
+
+ { 0x800ff40f, KEY_INFO },
+ { 0x800ff426, KEY_EPG }, /* Guide */
+ { 0x800ff45a, KEY_SUBTITLE }, /* Caption/Teletext */
+ { 0x800ff44d, KEY_TITLE },
+
+ { 0x800ff40c, KEY_POWER },
+ { 0x800ff40d, KEY_PROG1 }, /* Windows MCE button */
+
+};
+
+static struct rc_keymap imon_mce_map = {
+ .map = {
+ .scan = imon_mce,
+ .size = ARRAY_SIZE(imon_mce),
+ /* its RC6, but w/a hardware decoder */
+ .ir_type = IR_TYPE_RC6,
+ .name = RC_MAP_IMON_MCE,
+ }
+};
+
+static int __init init_rc_map_imon_mce(void)
+{
+ return ir_register_map(&imon_mce_map);
+}
+
+static void __exit exit_rc_map_imon_mce(void)
+{
+ ir_unregister_map(&imon_mce_map);
+}
+
+module_init(init_rc_map_imon_mce)
+module_exit(exit_rc_map_imon_mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
--- /dev/null
+/* rc5-imon-pad.c - Keytable for SoundGraph iMON PAD and Antec Veris
+ * RM-200 Remote Control
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * standard imon remote key table, which isn't really entirely
+ * "standard", as different receivers decode the same key on the
+ * same remote to different hex codes, and the silkscreened names
+ * vary a bit between the SoundGraph and Antec remotes... ugh.
+ */
+static struct ir_scancode imon_pad[] = {
+ /* keys sorted mostly by frequency of use to optimize lookups */
+ { 0x2a8195b7, KEY_REWIND },
+ { 0x298315b7, KEY_REWIND },
+ { 0x2b8115b7, KEY_FASTFORWARD },
+ { 0x2b8315b7, KEY_FASTFORWARD },
+ { 0x2b9115b7, KEY_PREVIOUS },
+ { 0x298195b7, KEY_NEXT },
+
+ { 0x2a8115b7, KEY_PLAY },
+ { 0x2a8315b7, KEY_PLAY },
+ { 0x2a9115b7, KEY_PAUSE },
+ { 0x2b9715b7, KEY_STOP },
+ { 0x298115b7, KEY_RECORD },
+
+ { 0x01008000, KEY_UP },
+ { 0x01007f00, KEY_DOWN },
+ { 0x01000080, KEY_LEFT },
+ { 0x0100007f, KEY_RIGHT },
+
+ { 0x2aa515b7, KEY_UP },
+ { 0x289515b7, KEY_DOWN },
+ { 0x29a515b7, KEY_LEFT },
+ { 0x2ba515b7, KEY_RIGHT },
+
+ { 0x0200002c, KEY_SPACE }, /* Select/Space */
+ { 0x2a9315b7, KEY_SPACE }, /* Select/Space */
+ { 0x02000028, KEY_ENTER },
+ { 0x28a195b7, KEY_ENTER },
+ { 0x288195b7, KEY_EXIT },
+ { 0x02000029, KEY_ESC },
+ { 0x2bb715b7, KEY_ESC },
+ { 0x0200002a, KEY_BACKSPACE },
+ { 0x28a115b7, KEY_BACKSPACE },
+
+ { 0x2b9595b7, KEY_MUTE },
+ { 0x28a395b7, KEY_VOLUMEUP },
+ { 0x28a595b7, KEY_VOLUMEDOWN },
+ { 0x289395b7, KEY_CHANNELUP },
+ { 0x288795b7, KEY_CHANNELDOWN },
+
+ { 0x0200001e, KEY_NUMERIC_1 },
+ { 0x0200001f, KEY_NUMERIC_2 },
+ { 0x02000020, KEY_NUMERIC_3 },
+ { 0x02000021, KEY_NUMERIC_4 },
+ { 0x02000022, KEY_NUMERIC_5 },
+ { 0x02000023, KEY_NUMERIC_6 },
+ { 0x02000024, KEY_NUMERIC_7 },
+ { 0x02000025, KEY_NUMERIC_8 },
+ { 0x02000026, KEY_NUMERIC_9 },
+ { 0x02000027, KEY_NUMERIC_0 },
+
+ { 0x28b595b7, KEY_NUMERIC_1 },
+ { 0x2bb195b7, KEY_NUMERIC_2 },
+ { 0x28b195b7, KEY_NUMERIC_3 },
+ { 0x2a8595b7, KEY_NUMERIC_4 },
+ { 0x299595b7, KEY_NUMERIC_5 },
+ { 0x2aa595b7, KEY_NUMERIC_6 },
+ { 0x2b9395b7, KEY_NUMERIC_7 },
+ { 0x2a8515b7, KEY_NUMERIC_8 },
+ { 0x2aa115b7, KEY_NUMERIC_9 },
+ { 0x2ba595b7, KEY_NUMERIC_0 },
+
+ { 0x02200025, KEY_NUMERIC_STAR },
+ { 0x28b515b7, KEY_NUMERIC_STAR },
+ { 0x02200020, KEY_NUMERIC_POUND },
+ { 0x29a115b7, KEY_NUMERIC_POUND },
+
+ { 0x2b8515b7, KEY_VIDEO },
+ { 0x299195b7, KEY_AUDIO },
+ { 0x2ba115b7, KEY_CAMERA },
+ { 0x28a515b7, KEY_TV },
+ { 0x29a395b7, KEY_DVD },
+ { 0x29a295b7, KEY_DVD },
+
+ /* the Menu key between DVD and Subtitle on the RM-200... */
+ { 0x2ba385b7, KEY_MENU },
+ { 0x2ba395b7, KEY_MENU },
+
+ { 0x288515b7, KEY_BOOKMARKS },
+ { 0x2ab715b7, KEY_MEDIA }, /* Thumbnail */
+ { 0x298595b7, KEY_SUBTITLE },
+ { 0x2b8595b7, KEY_LANGUAGE },
+
+ { 0x29a595b7, KEY_ZOOM },
+ { 0x2aa395b7, KEY_SCREEN }, /* FullScreen */
+
+ { 0x299115b7, KEY_KEYBOARD },
+ { 0x299135b7, KEY_KEYBOARD },
+
+ { 0x01010000, BTN_LEFT },
+ { 0x01020000, BTN_RIGHT },
+ { 0x01010080, BTN_LEFT },
+ { 0x01020080, BTN_RIGHT },
+ { 0x688301b7, BTN_LEFT },
+ { 0x688481b7, BTN_RIGHT },
+
+ { 0x2a9395b7, KEY_CYCLEWINDOWS }, /* TaskSwitcher */
+ { 0x2b8395b7, KEY_TIME }, /* Timer */
+
+ { 0x289115b7, KEY_POWER },
+ { 0x29b195b7, KEY_EJECTCD }, /* the one next to play */
+ { 0x299395b7, KEY_EJECTCLOSECD }, /* eject (by TaskSw) */
+
+ { 0x02800000, KEY_CONTEXT_MENU }, /* Left Menu */
+ { 0x2b8195b7, KEY_CONTEXT_MENU }, /* Left Menu*/
+ { 0x02000065, KEY_COMPOSE }, /* RightMenu */
+ { 0x28b715b7, KEY_COMPOSE }, /* RightMenu */
+ { 0x2ab195b7, KEY_PROG1 }, /* Go or MultiMon */
+ { 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */
+};
+
+static struct rc_keymap imon_pad_map = {
+ .map = {
+ .scan = imon_pad,
+ .size = ARRAY_SIZE(imon_pad),
+ /* actual protocol details unknown, hardware decoder */
+ .ir_type = IR_TYPE_OTHER,
+ .name = RC_MAP_IMON_PAD,
+ }
+};
+
+static int __init init_rc_map_imon_pad(void)
+{
+ return ir_register_map(&imon_pad_map);
+}
+
+static void __exit exit_rc_map_imon_pad(void)
+{
+ ir_unregister_map(&imon_pad_map);
+}
+
+module_init(init_rc_map_imon_pad)
+module_exit(exit_rc_map_imon_pad)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
--- /dev/null
+/* iodata-bctv7e.h - Keytable for iodata_bctv7e Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* IO-DATA BCTV7E Remote */
+
+static struct ir_scancode iodata_bctv7e[] = {
+ { 0x40, KEY_TV },
+ { 0x20, KEY_RADIO }, /* FM */
+ { 0x60, KEY_EPG },
+ { 0x00, KEY_POWER },
+
+ /* Keys 0 to 9 */
+ { 0x44, KEY_0 }, /* 10 */
+ { 0x50, KEY_1 },
+ { 0x30, KEY_2 },
+ { 0x70, KEY_3 },
+ { 0x48, KEY_4 },
+ { 0x28, KEY_5 },
+ { 0x68, KEY_6 },
+ { 0x58, KEY_7 },
+ { 0x38, KEY_8 },
+ { 0x78, KEY_9 },
+
+ { 0x10, KEY_L }, /* Live */
+ { 0x08, KEY_TIME }, /* Time Shift */
+
+ { 0x18, KEY_PLAYPAUSE }, /* Play */
+
+ { 0x24, KEY_ENTER }, /* 11 */
+ { 0x64, KEY_ESC }, /* 12 */
+ { 0x04, KEY_M }, /* Multi */
+
+ { 0x54, KEY_VIDEO },
+ { 0x34, KEY_CHANNELUP },
+ { 0x74, KEY_VOLUMEUP },
+ { 0x14, KEY_MUTE },
+
+ { 0x4c, KEY_VCR }, /* SVIDEO */
+ { 0x2c, KEY_CHANNELDOWN },
+ { 0x6c, KEY_VOLUMEDOWN },
+ { 0x0c, KEY_ZOOM },
+
+ { 0x5c, KEY_PAUSE },
+ { 0x3c, KEY_RED }, /* || (red) */
+ { 0x7c, KEY_RECORD }, /* recording */
+ { 0x1c, KEY_STOP },
+
+ { 0x41, KEY_REWIND }, /* backward << */
+ { 0x21, KEY_PLAY },
+ { 0x61, KEY_FASTFORWARD }, /* forward >> */
+ { 0x01, KEY_NEXT }, /* skip >| */
+};
+
+static struct rc_keymap iodata_bctv7e_map = {
+ .map = {
+ .scan = iodata_bctv7e,
+ .size = ARRAY_SIZE(iodata_bctv7e),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_IODATA_BCTV7E,
+ }
+};
+
+static int __init init_rc_map_iodata_bctv7e(void)
+{
+ return ir_register_map(&iodata_bctv7e_map);
+}
+
+static void __exit exit_rc_map_iodata_bctv7e(void)
+{
+ ir_unregister_map(&iodata_bctv7e_map);
+}
+
+module_init(init_rc_map_iodata_bctv7e)
+module_exit(exit_rc_map_iodata_bctv7e)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* kaiomy.h - Keytable for kaiomy Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Kaiomy TVnPC U2
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+
+static struct ir_scancode kaiomy[] = {
+ { 0x43, KEY_POWER2},
+ { 0x01, KEY_LIST},
+ { 0x0b, KEY_ZOOM},
+ { 0x03, KEY_POWER},
+
+ { 0x04, KEY_1},
+ { 0x08, KEY_2},
+ { 0x02, KEY_3},
+
+ { 0x0f, KEY_4},
+ { 0x05, KEY_5},
+ { 0x06, KEY_6},
+
+ { 0x0c, KEY_7},
+ { 0x0d, KEY_8},
+ { 0x0a, KEY_9},
+
+ { 0x11, KEY_0},
+
+ { 0x09, KEY_CHANNELUP},
+ { 0x07, KEY_CHANNELDOWN},
+
+ { 0x0e, KEY_VOLUMEUP},
+ { 0x13, KEY_VOLUMEDOWN},
+
+ { 0x10, KEY_HOME},
+ { 0x12, KEY_ENTER},
+
+ { 0x14, KEY_RECORD},
+ { 0x15, KEY_STOP},
+ { 0x16, KEY_PLAY},
+ { 0x17, KEY_MUTE},
+
+ { 0x18, KEY_UP},
+ { 0x19, KEY_DOWN},
+ { 0x1a, KEY_LEFT},
+ { 0x1b, KEY_RIGHT},
+
+ { 0x1c, KEY_RED},
+ { 0x1d, KEY_GREEN},
+ { 0x1e, KEY_YELLOW},
+ { 0x1f, KEY_BLUE},
+};
+
+static struct rc_keymap kaiomy_map = {
+ .map = {
+ .scan = kaiomy,
+ .size = ARRAY_SIZE(kaiomy),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_KAIOMY,
+ }
+};
+
+static int __init init_rc_map_kaiomy(void)
+{
+ return ir_register_map(&kaiomy_map);
+}
+
+static void __exit exit_rc_map_kaiomy(void)
+{
+ ir_unregister_map(&kaiomy_map);
+}
+
+module_init(init_rc_map_kaiomy)
+module_exit(exit_rc_map_kaiomy)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* kworld-315u.h - Keytable for kworld_315u Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Kworld 315U
+ */
+
+static struct ir_scancode kworld_315u[] = {
+ { 0x6143, KEY_POWER },
+ { 0x6101, KEY_TUNER }, /* source */
+ { 0x610b, KEY_ZOOM },
+ { 0x6103, KEY_POWER2 }, /* shutdown */
+
+ { 0x6104, KEY_1 },
+ { 0x6108, KEY_2 },
+ { 0x6102, KEY_3 },
+ { 0x6109, KEY_CHANNELUP },
+
+ { 0x610f, KEY_4 },
+ { 0x6105, KEY_5 },
+ { 0x6106, KEY_6 },
+ { 0x6107, KEY_CHANNELDOWN },
+
+ { 0x610c, KEY_7 },
+ { 0x610d, KEY_8 },
+ { 0x610a, KEY_9 },
+ { 0x610e, KEY_VOLUMEUP },
+
+ { 0x6110, KEY_LAST },
+ { 0x6111, KEY_0 },
+ { 0x6112, KEY_ENTER },
+ { 0x6113, KEY_VOLUMEDOWN },
+
+ { 0x6114, KEY_RECORD },
+ { 0x6115, KEY_STOP },
+ { 0x6116, KEY_PLAY },
+ { 0x6117, KEY_MUTE },
+
+ { 0x6118, KEY_UP },
+ { 0x6119, KEY_DOWN },
+ { 0x611a, KEY_LEFT },
+ { 0x611b, KEY_RIGHT },
+
+ { 0x611c, KEY_RED },
+ { 0x611d, KEY_GREEN },
+ { 0x611e, KEY_YELLOW },
+ { 0x611f, KEY_BLUE },
+};
+
+static struct rc_keymap kworld_315u_map = {
+ .map = {
+ .scan = kworld_315u,
+ .size = ARRAY_SIZE(kworld_315u),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_KWORLD_315U,
+ }
+};
+
+static int __init init_rc_map_kworld_315u(void)
+{
+ return ir_register_map(&kworld_315u_map);
+}
+
+static void __exit exit_rc_map_kworld_315u(void)
+{
+ ir_unregister_map(&kworld_315u_map);
+}
+
+module_init(init_rc_map_kworld_315u)
+module_exit(exit_rc_map_kworld_315u)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* kworld-plus-tv-analog.h - Keytable for kworld_plus_tv_analog Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Kworld Plus TV Analog Lite PCI IR
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+
+static struct ir_scancode kworld_plus_tv_analog[] = {
+ { 0x0c, KEY_PROG1 }, /* Kworld key */
+ { 0x16, KEY_CLOSECD }, /* -> ) */
+ { 0x1d, KEY_POWER2 },
+
+ { 0x00, KEY_1 },
+ { 0x01, KEY_2 },
+ { 0x02, KEY_3 }, /* Two keys have the same code: 3 and left */
+ { 0x03, KEY_4 }, /* Two keys have the same code: 3 and right */
+ { 0x04, KEY_5 },
+ { 0x05, KEY_6 },
+ { 0x06, KEY_7 },
+ { 0x07, KEY_8 },
+ { 0x08, KEY_9 },
+ { 0x0a, KEY_0 },
+
+ { 0x09, KEY_AGAIN },
+ { 0x14, KEY_MUTE },
+
+ { 0x20, KEY_UP },
+ { 0x21, KEY_DOWN },
+ { 0x0b, KEY_ENTER },
+
+ { 0x10, KEY_CHANNELUP },
+ { 0x11, KEY_CHANNELDOWN },
+
+ /* Couldn't map key left/key right since those
+ conflict with '3' and '4' scancodes
+ I dunno what the original driver does
+ */
+
+ { 0x13, KEY_VOLUMEUP },
+ { 0x12, KEY_VOLUMEDOWN },
+
+ /* The lower part of the IR
+ There are several duplicated keycodes there.
+ Most of them conflict with digits.
+ Add mappings just to the unused scancodes.
+ Somehow, the original driver has a way to know,
+ but this doesn't seem to be on some GPIO.
+ Also, it is not related to the time between keyup
+ and keydown.
+ */
+ { 0x19, KEY_TIME}, /* Timeshift */
+ { 0x1a, KEY_STOP},
+ { 0x1b, KEY_RECORD},
+
+ { 0x22, KEY_TEXT},
+
+ { 0x15, KEY_AUDIO}, /* ((*)) */
+ { 0x0f, KEY_ZOOM},
+ { 0x1c, KEY_CAMERA}, /* snapshot */
+
+ { 0x18, KEY_RED}, /* B */
+ { 0x23, KEY_GREEN}, /* C */
+};
+
+static struct rc_keymap kworld_plus_tv_analog_map = {
+ .map = {
+ .scan = kworld_plus_tv_analog,
+ .size = ARRAY_SIZE(kworld_plus_tv_analog),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_KWORLD_PLUS_TV_ANALOG,
+ }
+};
+
+static int __init init_rc_map_kworld_plus_tv_analog(void)
+{
+ return ir_register_map(&kworld_plus_tv_analog_map);
+}
+
+static void __exit exit_rc_map_kworld_plus_tv_analog(void)
+{
+ ir_unregister_map(&kworld_plus_tv_analog_map);
+}
+
+module_init(init_rc_map_kworld_plus_tv_analog)
+module_exit(exit_rc_map_kworld_plus_tv_analog)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * LeadTek Y04G0051 remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode leadtek_y04g0051[] = {
+ { 0x0300, KEY_POWER2 },
+ { 0x0303, KEY_SCREEN },
+ { 0x0304, KEY_RIGHT },
+ { 0x0305, KEY_1 },
+ { 0x0306, KEY_2 },
+ { 0x0307, KEY_3 },
+ { 0x0308, KEY_LEFT },
+ { 0x0309, KEY_4 },
+ { 0x030a, KEY_5 },
+ { 0x030b, KEY_6 },
+ { 0x030c, KEY_UP },
+ { 0x030d, KEY_7 },
+ { 0x030e, KEY_8 },
+ { 0x030f, KEY_9 },
+ { 0x0310, KEY_DOWN },
+ { 0x0311, KEY_AGAIN },
+ { 0x0312, KEY_0 },
+ { 0x0313, KEY_OK }, /* 1st ok */
+ { 0x0314, KEY_MUTE },
+ { 0x0316, KEY_OK }, /* 2nd ok */
+ { 0x031e, KEY_VIDEO }, /* 2nd video */
+ { 0x031b, KEY_AUDIO },
+ { 0x031f, KEY_TEXT },
+ { 0x0340, KEY_SLEEP },
+ { 0x0341, KEY_DOT },
+ { 0x0342, KEY_REWIND },
+ { 0x0343, KEY_PLAY },
+ { 0x0344, KEY_FASTFORWARD },
+ { 0x0345, KEY_TIME },
+ { 0x0346, KEY_STOP }, /* 2nd stop */
+ { 0x0347, KEY_RECORD },
+ { 0x0348, KEY_CAMERA },
+ { 0x0349, KEY_ESC },
+ { 0x034a, KEY_NEW },
+ { 0x034b, KEY_RED },
+ { 0x034c, KEY_GREEN },
+ { 0x034d, KEY_YELLOW },
+ { 0x034e, KEY_BLUE },
+ { 0x034f, KEY_MENU },
+ { 0x0350, KEY_STOP }, /* 1st stop */
+ { 0x0351, KEY_CHANNEL },
+ { 0x0352, KEY_VIDEO }, /* 1st video */
+ { 0x0353, KEY_EPG },
+ { 0x0354, KEY_PREVIOUS },
+ { 0x0355, KEY_NEXT },
+ { 0x0356, KEY_TV },
+ { 0x035a, KEY_VOLUMEDOWN },
+ { 0x035b, KEY_CHANNELUP },
+ { 0x035e, KEY_VOLUMEUP },
+ { 0x035f, KEY_CHANNELDOWN },
+};
+
+static struct rc_keymap leadtek_y04g0051_map = {
+ .map = {
+ .scan = leadtek_y04g0051,
+ .size = ARRAY_SIZE(leadtek_y04g0051),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_LEADTEK_Y04G0051,
+ }
+};
+
+static int __init init_rc_map_leadtek_y04g0051(void)
+{
+ return ir_register_map(&leadtek_y04g0051_map);
+}
+
+static void __exit exit_rc_map_leadtek_y04g0051(void)
+{
+ ir_unregister_map(&leadtek_y04g0051_map);
+}
+
+module_init(init_rc_map_leadtek_y04g0051)
+module_exit(exit_rc_map_leadtek_y04g0051)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/* rc-lirc.c - Empty dummy keytable, for use when its preferred to pass
+ * all raw IR data to the lirc userspace decoder.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/ir-core.h>
+
+static struct ir_scancode lirc[] = {
+ { },
+};
+
+static struct rc_keymap lirc_map = {
+ .map = {
+ .scan = lirc,
+ .size = ARRAY_SIZE(lirc),
+ .ir_type = IR_TYPE_LIRC,
+ .name = RC_MAP_LIRC,
+ }
+};
+
+static int __init init_rc_map_lirc(void)
+{
+ return ir_register_map(&lirc_map);
+}
+
+static void __exit exit_rc_map_lirc(void)
+{
+ ir_unregister_map(&lirc_map);
+}
+
+module_init(init_rc_map_lirc)
+module_exit(exit_rc_map_lirc)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
--- /dev/null
+/* LME2510 remote control
+ *
+ *
+ * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+
+static struct ir_scancode lme2510_rc[] = {
+ { 0xba45, KEY_0 },
+ { 0xa05f, KEY_1 },
+ { 0xaf50, KEY_2 },
+ { 0xa25d, KEY_3 },
+ { 0xbe41, KEY_4 },
+ { 0xf50a, KEY_5 },
+ { 0xbd42, KEY_6 },
+ { 0xb847, KEY_7 },
+ { 0xb649, KEY_8 },
+ { 0xfa05, KEY_9 },
+ { 0xbc43, KEY_POWER },
+ { 0xb946, KEY_SUBTITLE },
+ { 0xf906, KEY_PAUSE },
+ { 0xfc03, KEY_MEDIA_REPEAT},
+ { 0xfd02, KEY_PAUSE },
+ { 0xa15e, KEY_VOLUMEUP },
+ { 0xa35c, KEY_VOLUMEDOWN },
+ { 0xf609, KEY_CHANNELUP },
+ { 0xe51a, KEY_CHANNELDOWN },
+ { 0xe11e, KEY_PLAY },
+ { 0xe41b, KEY_ZOOM },
+ { 0xa659, KEY_MUTE },
+ { 0xa55a, KEY_TV },
+ { 0xe718, KEY_RECORD },
+ { 0xf807, KEY_EPG },
+ { 0xfe01, KEY_STOP },
+
+};
+
+static struct rc_keymap lme2510_map = {
+ .map = {
+ .scan = lme2510_rc,
+ .size = ARRAY_SIZE(lme2510_rc),
+ .ir_type = IR_TYPE_UNKNOWN,
+ .name = RC_MAP_LME2510,
+ }
+};
+
+static int __init init_rc_lme2510_map(void)
+{
+ return ir_register_map(&lme2510_map);
+}
+
+static void __exit exit_rc_lme2510_map(void)
+{
+ ir_unregister_map(&lme2510_map);
+}
+
+module_init(init_rc_lme2510_map)
+module_exit(exit_rc_lme2510_map)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Malcolm Priestley tvboxspy@gmail.com");
--- /dev/null
+/* manli.h - Keytable for manli Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Michael Tokarev <mjt@tls.msk.ru>
+ keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at
+ least, and probably other cards too.
+ The "ascii-art picture" below (in comments, first row
+ is the keycode in hex, and subsequent row(s) shows
+ the button labels (several variants when appropriate)
+ helps to descide which keycodes to assign to the buttons.
+ */
+
+static struct ir_scancode manli[] = {
+
+ /* 0x1c 0x12 *
+ * FUNCTION POWER *
+ * FM (|) *
+ * */
+ { 0x1c, KEY_RADIO }, /*XXX*/
+ { 0x12, KEY_POWER },
+
+ /* 0x01 0x02 0x03 *
+ * 1 2 3 *
+ * *
+ * 0x04 0x05 0x06 *
+ * 4 5 6 *
+ * *
+ * 0x07 0x08 0x09 *
+ * 7 8 9 *
+ * */
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ /* 0x0a 0x00 0x17 *
+ * RECALL 0 +100 *
+ * PLUS *
+ * */
+ { 0x0a, KEY_AGAIN }, /*XXX KEY_REWIND? */
+ { 0x00, KEY_0 },
+ { 0x17, KEY_DIGITS }, /*XXX*/
+
+ /* 0x14 0x10 *
+ * MENU INFO *
+ * OSD */
+ { 0x14, KEY_MENU },
+ { 0x10, KEY_INFO },
+
+ /* 0x0b *
+ * Up *
+ * *
+ * 0x18 0x16 0x0c *
+ * Left Ok Right *
+ * *
+ * 0x015 *
+ * Down *
+ * */
+ { 0x0b, KEY_UP },
+ { 0x18, KEY_LEFT },
+ { 0x16, KEY_OK }, /*XXX KEY_SELECT? KEY_ENTER? */
+ { 0x0c, KEY_RIGHT },
+ { 0x15, KEY_DOWN },
+
+ /* 0x11 0x0d *
+ * TV/AV MODE *
+ * SOURCE STEREO *
+ * */
+ { 0x11, KEY_TV }, /*XXX*/
+ { 0x0d, KEY_MODE }, /*XXX there's no KEY_STEREO */
+
+ /* 0x0f 0x1b 0x1a *
+ * AUDIO Vol+ Chan+ *
+ * TIMESHIFT??? *
+ * *
+ * 0x0e 0x1f 0x1e *
+ * SLEEP Vol- Chan- *
+ * */
+ { 0x0f, KEY_AUDIO },
+ { 0x1b, KEY_VOLUMEUP },
+ { 0x1a, KEY_CHANNELUP },
+ { 0x0e, KEY_TIME },
+ { 0x1f, KEY_VOLUMEDOWN },
+ { 0x1e, KEY_CHANNELDOWN },
+
+ /* 0x13 0x19 *
+ * MUTE SNAPSHOT*
+ * */
+ { 0x13, KEY_MUTE },
+ { 0x19, KEY_CAMERA },
+
+ /* 0x1d unused ? */
+};
+
+static struct rc_keymap manli_map = {
+ .map = {
+ .scan = manli,
+ .size = ARRAY_SIZE(manli),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_MANLI,
+ }
+};
+
+static int __init init_rc_map_manli(void)
+{
+ return ir_register_map(&manli_map);
+}
+
+static void __exit exit_rc_map_manli(void)
+{
+ ir_unregister_map(&manli_map);
+}
+
+module_init(init_rc_map_manli)
+module_exit(exit_rc_map_manli)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * MSI DIGIVOX mini II remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode msi_digivox_ii[] = {
+ { 0x0002, KEY_2 },
+ { 0x0003, KEY_UP }, /* up */
+ { 0x0004, KEY_3 },
+ { 0x0005, KEY_CHANNELDOWN },
+ { 0x0008, KEY_5 },
+ { 0x0009, KEY_0 },
+ { 0x000b, KEY_8 },
+ { 0x000d, KEY_DOWN }, /* down */
+ { 0x0010, KEY_9 },
+ { 0x0011, KEY_7 },
+ { 0x0014, KEY_VOLUMEUP },
+ { 0x0015, KEY_CHANNELUP },
+ { 0x0016, KEY_OK },
+ { 0x0017, KEY_POWER2 },
+ { 0x001a, KEY_1 },
+ { 0x001c, KEY_4 },
+ { 0x001d, KEY_6 },
+ { 0x001f, KEY_VOLUMEDOWN },
+};
+
+static struct rc_keymap msi_digivox_ii_map = {
+ .map = {
+ .scan = msi_digivox_ii,
+ .size = ARRAY_SIZE(msi_digivox_ii),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_MSI_DIGIVOX_II,
+ }
+};
+
+static int __init init_rc_map_msi_digivox_ii(void)
+{
+ return ir_register_map(&msi_digivox_ii_map);
+}
+
+static void __exit exit_rc_map_msi_digivox_ii(void)
+{
+ ir_unregister_map(&msi_digivox_ii_map);
+}
+
+module_init(init_rc_map_msi_digivox_ii)
+module_exit(exit_rc_map_msi_digivox_ii)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/*
+ * MSI DIGIVOX mini III remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* MSI DIGIVOX mini III */
+/* Uses NEC extended 0x61d6. */
+/* This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote
+ since rc-kworld-315u.c lacks NEC extended address byte. */
+static struct ir_scancode msi_digivox_iii[] = {
+ { 0x61d601, KEY_VIDEO }, /* Source */
+ { 0x61d602, KEY_3 },
+ { 0x61d603, KEY_POWER }, /* ShutDown */
+ { 0x61d604, KEY_1 },
+ { 0x61d605, KEY_5 },
+ { 0x61d606, KEY_6 },
+ { 0x61d607, KEY_CHANNELDOWN }, /* CH- */
+ { 0x61d608, KEY_2 },
+ { 0x61d609, KEY_CHANNELUP }, /* CH+ */
+ { 0x61d60a, KEY_9 },
+ { 0x61d60b, KEY_ZOOM }, /* Zoom */
+ { 0x61d60c, KEY_7 },
+ { 0x61d60d, KEY_8 },
+ { 0x61d60e, KEY_VOLUMEUP }, /* Vol+ */
+ { 0x61d60f, KEY_4 },
+ { 0x61d610, KEY_ESC }, /* [back up arrow] */
+ { 0x61d611, KEY_0 },
+ { 0x61d612, KEY_OK }, /* [enter arrow] */
+ { 0x61d613, KEY_VOLUMEDOWN }, /* Vol- */
+ { 0x61d614, KEY_RECORD }, /* Rec */
+ { 0x61d615, KEY_STOP }, /* Stop */
+ { 0x61d616, KEY_PLAY }, /* Play */
+ { 0x61d617, KEY_MUTE }, /* Mute */
+ { 0x61d618, KEY_UP },
+ { 0x61d619, KEY_DOWN },
+ { 0x61d61a, KEY_LEFT },
+ { 0x61d61b, KEY_RIGHT },
+ { 0x61d61c, KEY_RED },
+ { 0x61d61d, KEY_GREEN },
+ { 0x61d61e, KEY_YELLOW },
+ { 0x61d61f, KEY_BLUE },
+ { 0x61d643, KEY_POWER2 }, /* [red power button] */
+};
+
+static struct rc_keymap msi_digivox_iii_map = {
+ .map = {
+ .scan = msi_digivox_iii,
+ .size = ARRAY_SIZE(msi_digivox_iii),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_MSI_DIGIVOX_III,
+ }
+};
+
+static int __init init_rc_map_msi_digivox_iii(void)
+{
+ return ir_register_map(&msi_digivox_iii_map);
+}
+
+static void __exit exit_rc_map_msi_digivox_iii(void)
+{
+ ir_unregister_map(&msi_digivox_iii_map);
+}
+
+module_init(init_rc_map_msi_digivox_iii)
+module_exit(exit_rc_map_msi_digivox_iii)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/* msi-tvanywhere-plus.h - Keytable for msi_tvanywhere_plus Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
+ is marked "KS003". The controller is I2C at address 0x30, but does not seem
+ to respond to probes until a read is performed from a valid device.
+ I don't know why...
+
+ Note: This remote may be of similar or identical design to the
+ Pixelview remote (?). The raw codes and duplicate button codes
+ appear to be the same.
+
+ Henry Wong <henry@stuffedcow.net>
+ Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
+*/
+
+static struct ir_scancode msi_tvanywhere_plus[] = {
+
+/* ---- Remote Button Layout ----
+
+ POWER SOURCE SCAN MUTE
+ TV/FM 1 2 3
+ |> 4 5 6
+ <| 7 8 9
+ ^^UP 0 + RECALL
+ vvDN RECORD STOP PLAY
+
+ MINIMIZE ZOOM
+
+ CH+
+ VOL- VOL+
+ CH-
+
+ SNAPSHOT MTS
+
+ << FUNC >> RESET
+*/
+
+ { 0x01, KEY_1 }, /* 1 */
+ { 0x0b, KEY_2 }, /* 2 */
+ { 0x1b, KEY_3 }, /* 3 */
+ { 0x05, KEY_4 }, /* 4 */
+ { 0x09, KEY_5 }, /* 5 */
+ { 0x15, KEY_6 }, /* 6 */
+ { 0x06, KEY_7 }, /* 7 */
+ { 0x0a, KEY_8 }, /* 8 */
+ { 0x12, KEY_9 }, /* 9 */
+ { 0x02, KEY_0 }, /* 0 */
+ { 0x10, KEY_KPPLUS }, /* + */
+ { 0x13, KEY_AGAIN }, /* Recall */
+
+ { 0x1e, KEY_POWER }, /* Power */
+ { 0x07, KEY_TUNER }, /* Source */
+ { 0x1c, KEY_SEARCH }, /* Scan */
+ { 0x18, KEY_MUTE }, /* Mute */
+
+ { 0x03, KEY_RADIO }, /* TV/FM */
+ /* The next four keys are duplicates that appear to send the
+ same IR code as Ch+, Ch-, >>, and << . The raw code assigned
+ to them is the actual code + 0x20 - they will never be
+ detected as such unless some way is discovered to distinguish
+ these buttons from those that have the same code. */
+ { 0x3f, KEY_RIGHT }, /* |> and Ch+ */
+ { 0x37, KEY_LEFT }, /* <| and Ch- */
+ { 0x2c, KEY_UP }, /* ^^Up and >> */
+ { 0x24, KEY_DOWN }, /* vvDn and << */
+
+ { 0x00, KEY_RECORD }, /* Record */
+ { 0x08, KEY_STOP }, /* Stop */
+ { 0x11, KEY_PLAY }, /* Play */
+
+ { 0x0f, KEY_CLOSE }, /* Minimize */
+ { 0x19, KEY_ZOOM }, /* Zoom */
+ { 0x1a, KEY_CAMERA }, /* Snapshot */
+ { 0x0d, KEY_LANGUAGE }, /* MTS */
+
+ { 0x14, KEY_VOLUMEDOWN }, /* Vol- */
+ { 0x16, KEY_VOLUMEUP }, /* Vol+ */
+ { 0x17, KEY_CHANNELDOWN }, /* Ch- */
+ { 0x1f, KEY_CHANNELUP }, /* Ch+ */
+
+ { 0x04, KEY_REWIND }, /* << */
+ { 0x0e, KEY_MENU }, /* Function */
+ { 0x0c, KEY_FASTFORWARD }, /* >> */
+ { 0x1d, KEY_RESTART }, /* Reset */
+};
+
+static struct rc_keymap msi_tvanywhere_plus_map = {
+ .map = {
+ .scan = msi_tvanywhere_plus,
+ .size = ARRAY_SIZE(msi_tvanywhere_plus),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_MSI_TVANYWHERE_PLUS,
+ }
+};
+
+static int __init init_rc_map_msi_tvanywhere_plus(void)
+{
+ return ir_register_map(&msi_tvanywhere_plus_map);
+}
+
+static void __exit exit_rc_map_msi_tvanywhere_plus(void)
+{
+ ir_unregister_map(&msi_tvanywhere_plus_map);
+}
+
+module_init(init_rc_map_msi_tvanywhere_plus)
+module_exit(exit_rc_map_msi_tvanywhere_plus)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* msi-tvanywhere.h - Keytable for msi_tvanywhere Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* MSI TV@nywhere MASTER remote */
+
+static struct ir_scancode msi_tvanywhere[] = {
+ /* Keys 0 to 9 */
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ { 0x0c, KEY_MUTE },
+ { 0x0f, KEY_SCREEN }, /* Full Screen */
+ { 0x10, KEY_FN }, /* Funtion */
+ { 0x11, KEY_TIME }, /* Time shift */
+ { 0x12, KEY_POWER },
+ { 0x13, KEY_MEDIA }, /* MTS */
+ { 0x14, KEY_SLOW },
+ { 0x16, KEY_REWIND }, /* backward << */
+ { 0x17, KEY_ENTER }, /* Return */
+ { 0x18, KEY_FASTFORWARD }, /* forward >> */
+ { 0x1a, KEY_CHANNELUP },
+ { 0x1b, KEY_VOLUMEUP },
+ { 0x1e, KEY_CHANNELDOWN },
+ { 0x1f, KEY_VOLUMEDOWN },
+};
+
+static struct rc_keymap msi_tvanywhere_map = {
+ .map = {
+ .scan = msi_tvanywhere,
+ .size = ARRAY_SIZE(msi_tvanywhere),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_MSI_TVANYWHERE,
+ }
+};
+
+static int __init init_rc_map_msi_tvanywhere(void)
+{
+ return ir_register_map(&msi_tvanywhere_map);
+}
+
+static void __exit exit_rc_map_msi_tvanywhere(void)
+{
+ ir_unregister_map(&msi_tvanywhere_map);
+}
+
+module_init(init_rc_map_msi_tvanywhere)
+module_exit(exit_rc_map_msi_tvanywhere)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* nebula.h - Keytable for nebula Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode nebula[] = {
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+ { 0x0a, KEY_TV },
+ { 0x0b, KEY_AUX },
+ { 0x0c, KEY_DVD },
+ { 0x0d, KEY_POWER },
+ { 0x0e, KEY_MHP }, /* labelled 'Picture' */
+ { 0x0f, KEY_AUDIO },
+ { 0x10, KEY_INFO },
+ { 0x11, KEY_F13 }, /* 16:9 */
+ { 0x12, KEY_F14 }, /* 14:9 */
+ { 0x13, KEY_EPG },
+ { 0x14, KEY_EXIT },
+ { 0x15, KEY_MENU },
+ { 0x16, KEY_UP },
+ { 0x17, KEY_DOWN },
+ { 0x18, KEY_LEFT },
+ { 0x19, KEY_RIGHT },
+ { 0x1a, KEY_ENTER },
+ { 0x1b, KEY_CHANNELUP },
+ { 0x1c, KEY_CHANNELDOWN },
+ { 0x1d, KEY_VOLUMEUP },
+ { 0x1e, KEY_VOLUMEDOWN },
+ { 0x1f, KEY_RED },
+ { 0x20, KEY_GREEN },
+ { 0x21, KEY_YELLOW },
+ { 0x22, KEY_BLUE },
+ { 0x23, KEY_SUBTITLE },
+ { 0x24, KEY_F15 }, /* AD */
+ { 0x25, KEY_TEXT },
+ { 0x26, KEY_MUTE },
+ { 0x27, KEY_REWIND },
+ { 0x28, KEY_STOP },
+ { 0x29, KEY_PLAY },
+ { 0x2a, KEY_FASTFORWARD },
+ { 0x2b, KEY_F16 }, /* chapter */
+ { 0x2c, KEY_PAUSE },
+ { 0x2d, KEY_PLAY },
+ { 0x2e, KEY_RECORD },
+ { 0x2f, KEY_F17 }, /* picture in picture */
+ { 0x30, KEY_KPPLUS }, /* zoom in */
+ { 0x31, KEY_KPMINUS }, /* zoom out */
+ { 0x32, KEY_F18 }, /* capture */
+ { 0x33, KEY_F19 }, /* web */
+ { 0x34, KEY_EMAIL },
+ { 0x35, KEY_PHONE },
+ { 0x36, KEY_PC },
+};
+
+static struct rc_keymap nebula_map = {
+ .map = {
+ .scan = nebula,
+ .size = ARRAY_SIZE(nebula),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_NEBULA,
+ }
+};
+
+static int __init init_rc_map_nebula(void)
+{
+ return ir_register_map(&nebula_map);
+}
+
+static void __exit exit_rc_map_nebula(void)
+{
+ ir_unregister_map(&nebula_map);
+}
+
+module_init(init_rc_map_nebula)
+module_exit(exit_rc_map_nebula)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* nec-terratec-cinergy-xs.h - Keytable for nec_terratec_cinergy_xs Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Terratec Cinergy Hybrid T USB XS FM
+ Mauro Carvalho Chehab <mchehab@redhat.com>
+ */
+
+static struct ir_scancode nec_terratec_cinergy_xs[] = {
+ { 0x1441, KEY_HOME},
+ { 0x1401, KEY_POWER2},
+
+ { 0x1442, KEY_MENU}, /* DVD menu */
+ { 0x1443, KEY_SUBTITLE},
+ { 0x1444, KEY_TEXT}, /* Teletext */
+ { 0x1445, KEY_DELETE},
+
+ { 0x1402, KEY_1},
+ { 0x1403, KEY_2},
+ { 0x1404, KEY_3},
+ { 0x1405, KEY_4},
+ { 0x1406, KEY_5},
+ { 0x1407, KEY_6},
+ { 0x1408, KEY_7},
+ { 0x1409, KEY_8},
+ { 0x140a, KEY_9},
+ { 0x140c, KEY_0},
+
+ { 0x140b, KEY_TUNER}, /* AV */
+ { 0x140d, KEY_MODE}, /* A.B */
+
+ { 0x1446, KEY_TV},
+ { 0x1447, KEY_DVD},
+ { 0x1449, KEY_VIDEO},
+ { 0x144a, KEY_RADIO}, /* Music */
+ { 0x144b, KEY_CAMERA}, /* PIC */
+
+ { 0x1410, KEY_UP},
+ { 0x1411, KEY_LEFT},
+ { 0x1412, KEY_OK},
+ { 0x1413, KEY_RIGHT},
+ { 0x1414, KEY_DOWN},
+
+ { 0x140f, KEY_EPG},
+ { 0x1416, KEY_INFO},
+ { 0x144d, KEY_BACKSPACE},
+
+ { 0x141c, KEY_VOLUMEUP},
+ { 0x141e, KEY_VOLUMEDOWN},
+
+ { 0x144c, KEY_PLAY},
+ { 0x141d, KEY_MUTE},
+
+ { 0x141b, KEY_CHANNELUP},
+ { 0x141f, KEY_CHANNELDOWN},
+
+ { 0x1417, KEY_RED},
+ { 0x1418, KEY_GREEN},
+ { 0x1419, KEY_YELLOW},
+ { 0x141a, KEY_BLUE},
+
+ { 0x1458, KEY_RECORD},
+ { 0x1448, KEY_STOP},
+ { 0x1440, KEY_PAUSE},
+
+ { 0x1454, KEY_LAST},
+ { 0x144e, KEY_REWIND},
+ { 0x144f, KEY_FASTFORWARD},
+ { 0x145c, KEY_NEXT},
+};
+
+static struct rc_keymap nec_terratec_cinergy_xs_map = {
+ .map = {
+ .scan = nec_terratec_cinergy_xs,
+ .size = ARRAY_SIZE(nec_terratec_cinergy_xs),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_NEC_TERRATEC_CINERGY_XS,
+ }
+};
+
+static int __init init_rc_map_nec_terratec_cinergy_xs(void)
+{
+ return ir_register_map(&nec_terratec_cinergy_xs_map);
+}
+
+static void __exit exit_rc_map_nec_terratec_cinergy_xs(void)
+{
+ ir_unregister_map(&nec_terratec_cinergy_xs_map);
+}
+
+module_init(init_rc_map_nec_terratec_cinergy_xs)
+module_exit(exit_rc_map_nec_terratec_cinergy_xs)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* norwood.h - Keytable for norwood Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Norwood Micro (non-Pro) TV Tuner
+ By Peter Naulls <peter@chocky.org>
+ Key comments are the functions given in the manual */
+
+static struct ir_scancode norwood[] = {
+ /* Keys 0 to 9 */
+ { 0x20, KEY_0 },
+ { 0x21, KEY_1 },
+ { 0x22, KEY_2 },
+ { 0x23, KEY_3 },
+ { 0x24, KEY_4 },
+ { 0x25, KEY_5 },
+ { 0x26, KEY_6 },
+ { 0x27, KEY_7 },
+ { 0x28, KEY_8 },
+ { 0x29, KEY_9 },
+
+ { 0x78, KEY_TUNER }, /* Video Source */
+ { 0x2c, KEY_EXIT }, /* Open/Close software */
+ { 0x2a, KEY_SELECT }, /* 2 Digit Select */
+ { 0x69, KEY_AGAIN }, /* Recall */
+
+ { 0x32, KEY_BRIGHTNESSUP }, /* Brightness increase */
+ { 0x33, KEY_BRIGHTNESSDOWN }, /* Brightness decrease */
+ { 0x6b, KEY_KPPLUS }, /* (not named >>>>>) */
+ { 0x6c, KEY_KPMINUS }, /* (not named <<<<<) */
+
+ { 0x2d, KEY_MUTE }, /* Mute */
+ { 0x30, KEY_VOLUMEUP }, /* Volume up */
+ { 0x31, KEY_VOLUMEDOWN }, /* Volume down */
+ { 0x60, KEY_CHANNELUP }, /* Channel up */
+ { 0x61, KEY_CHANNELDOWN }, /* Channel down */
+
+ { 0x3f, KEY_RECORD }, /* Record */
+ { 0x37, KEY_PLAY }, /* Play */
+ { 0x36, KEY_PAUSE }, /* Pause */
+ { 0x2b, KEY_STOP }, /* Stop */
+ { 0x67, KEY_FASTFORWARD }, /* Foward */
+ { 0x66, KEY_REWIND }, /* Rewind */
+ { 0x3e, KEY_SEARCH }, /* Auto Scan */
+ { 0x2e, KEY_CAMERA }, /* Capture Video */
+ { 0x6d, KEY_MENU }, /* Show/Hide Control */
+ { 0x2f, KEY_ZOOM }, /* Full Screen */
+ { 0x34, KEY_RADIO }, /* FM */
+ { 0x65, KEY_POWER }, /* Computer power */
+};
+
+static struct rc_keymap norwood_map = {
+ .map = {
+ .scan = norwood,
+ .size = ARRAY_SIZE(norwood),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_NORWOOD,
+ }
+};
+
+static int __init init_rc_map_norwood(void)
+{
+ return ir_register_map(&norwood_map);
+}
+
+static void __exit exit_rc_map_norwood(void)
+{
+ ir_unregister_map(&norwood_map);
+}
+
+module_init(init_rc_map_norwood)
+module_exit(exit_rc_map_norwood)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* npgtech.h - Keytable for npgtech Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode npgtech[] = {
+ { 0x1d, KEY_SWITCHVIDEOMODE }, /* switch inputs */
+ { 0x2a, KEY_FRONT },
+
+ { 0x3e, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x06, KEY_3 },
+ { 0x0a, KEY_4 },
+ { 0x0e, KEY_5 },
+ { 0x12, KEY_6 },
+ { 0x16, KEY_7 },
+ { 0x1a, KEY_8 },
+ { 0x1e, KEY_9 },
+ { 0x3a, KEY_0 },
+ { 0x22, KEY_NUMLOCK }, /* -/-- */
+ { 0x20, KEY_REFRESH },
+
+ { 0x03, KEY_BRIGHTNESSDOWN },
+ { 0x28, KEY_AUDIO },
+ { 0x3c, KEY_CHANNELUP },
+ { 0x3f, KEY_VOLUMEDOWN },
+ { 0x2e, KEY_MUTE },
+ { 0x3b, KEY_VOLUMEUP },
+ { 0x00, KEY_CHANNELDOWN },
+ { 0x07, KEY_BRIGHTNESSUP },
+ { 0x2c, KEY_TEXT },
+
+ { 0x37, KEY_RECORD },
+ { 0x17, KEY_PLAY },
+ { 0x13, KEY_PAUSE },
+ { 0x26, KEY_STOP },
+ { 0x18, KEY_FASTFORWARD },
+ { 0x14, KEY_REWIND },
+ { 0x33, KEY_ZOOM },
+ { 0x32, KEY_KEYBOARD },
+ { 0x30, KEY_GOTO }, /* Pointing arrow */
+ { 0x36, KEY_MACRO }, /* Maximize/Minimize (yellow) */
+ { 0x0b, KEY_RADIO },
+ { 0x10, KEY_POWER },
+
+};
+
+static struct rc_keymap npgtech_map = {
+ .map = {
+ .scan = npgtech,
+ .size = ARRAY_SIZE(npgtech),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_NPGTECH,
+ }
+};
+
+static int __init init_rc_map_npgtech(void)
+{
+ return ir_register_map(&npgtech_map);
+}
+
+static void __exit exit_rc_map_npgtech(void)
+{
+ ir_unregister_map(&npgtech_map);
+}
+
+module_init(init_rc_map_npgtech)
+module_exit(exit_rc_map_npgtech)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* pctv-sedna.h - Keytable for pctv_sedna Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Mapping for the 28 key remote control as seen at
+ http://www.sednacomputer.com/photo/cardbus-tv.jpg
+ Pavel Mihaylov <bin@bash.info>
+ Also for the remote bundled with Kozumi KTV-01C card */
+
+static struct ir_scancode pctv_sedna[] = {
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ { 0x0a, KEY_AGAIN }, /* Recall */
+ { 0x0b, KEY_CHANNELUP },
+ { 0x0c, KEY_VOLUMEUP },
+ { 0x0d, KEY_MODE }, /* Stereo */
+ { 0x0e, KEY_STOP },
+ { 0x0f, KEY_PREVIOUSSONG },
+ { 0x10, KEY_ZOOM },
+ { 0x11, KEY_TUNER }, /* Source */
+ { 0x12, KEY_POWER },
+ { 0x13, KEY_MUTE },
+ { 0x15, KEY_CHANNELDOWN },
+ { 0x18, KEY_VOLUMEDOWN },
+ { 0x19, KEY_CAMERA }, /* Snapshot */
+ { 0x1a, KEY_NEXTSONG },
+ { 0x1b, KEY_TIME }, /* Time Shift */
+ { 0x1c, KEY_RADIO }, /* FM Radio */
+ { 0x1d, KEY_RECORD },
+ { 0x1e, KEY_PAUSE },
+ /* additional codes for Kozumi's remote */
+ { 0x14, KEY_INFO }, /* OSD */
+ { 0x16, KEY_OK }, /* OK */
+ { 0x17, KEY_DIGITS }, /* Plus */
+ { 0x1f, KEY_PLAY }, /* Play */
+};
+
+static struct rc_keymap pctv_sedna_map = {
+ .map = {
+ .scan = pctv_sedna,
+ .size = ARRAY_SIZE(pctv_sedna),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PCTV_SEDNA,
+ }
+};
+
+static int __init init_rc_map_pctv_sedna(void)
+{
+ return ir_register_map(&pctv_sedna_map);
+}
+
+static void __exit exit_rc_map_pctv_sedna(void)
+{
+ ir_unregister_map(&pctv_sedna_map);
+}
+
+module_init(init_rc_map_pctv_sedna)
+module_exit(exit_rc_map_pctv_sedna)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* pinnacle-color.h - Keytable for pinnacle_color Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode pinnacle_color[] = {
+ { 0x59, KEY_MUTE },
+ { 0x4a, KEY_POWER },
+
+ { 0x18, KEY_TEXT },
+ { 0x26, KEY_TV },
+ { 0x3d, KEY_PRINT },
+
+ { 0x48, KEY_RED },
+ { 0x04, KEY_GREEN },
+ { 0x11, KEY_YELLOW },
+ { 0x00, KEY_BLUE },
+
+ { 0x2d, KEY_VOLUMEUP },
+ { 0x1e, KEY_VOLUMEDOWN },
+
+ { 0x49, KEY_MENU },
+
+ { 0x16, KEY_CHANNELUP },
+ { 0x17, KEY_CHANNELDOWN },
+
+ { 0x20, KEY_UP },
+ { 0x21, KEY_DOWN },
+ { 0x22, KEY_LEFT },
+ { 0x23, KEY_RIGHT },
+ { 0x0d, KEY_SELECT },
+
+ { 0x08, KEY_BACK },
+ { 0x07, KEY_REFRESH },
+
+ { 0x2f, KEY_ZOOM },
+ { 0x29, KEY_RECORD },
+
+ { 0x4b, KEY_PAUSE },
+ { 0x4d, KEY_REWIND },
+ { 0x2e, KEY_PLAY },
+ { 0x4e, KEY_FORWARD },
+ { 0x53, KEY_PREVIOUS },
+ { 0x4c, KEY_STOP },
+ { 0x54, KEY_NEXT },
+
+ { 0x69, KEY_0 },
+ { 0x6a, KEY_1 },
+ { 0x6b, KEY_2 },
+ { 0x6c, KEY_3 },
+ { 0x6d, KEY_4 },
+ { 0x6e, KEY_5 },
+ { 0x6f, KEY_6 },
+ { 0x70, KEY_7 },
+ { 0x71, KEY_8 },
+ { 0x72, KEY_9 },
+
+ { 0x74, KEY_CHANNEL },
+ { 0x0a, KEY_BACKSPACE },
+};
+
+static struct rc_keymap pinnacle_color_map = {
+ .map = {
+ .scan = pinnacle_color,
+ .size = ARRAY_SIZE(pinnacle_color),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PINNACLE_COLOR,
+ }
+};
+
+static int __init init_rc_map_pinnacle_color(void)
+{
+ return ir_register_map(&pinnacle_color_map);
+}
+
+static void __exit exit_rc_map_pinnacle_color(void)
+{
+ ir_unregister_map(&pinnacle_color_map);
+}
+
+module_init(init_rc_map_pinnacle_color)
+module_exit(exit_rc_map_pinnacle_color)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* pinnacle-grey.h - Keytable for pinnacle_grey Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode pinnacle_grey[] = {
+ { 0x3a, KEY_0 },
+ { 0x31, KEY_1 },
+ { 0x32, KEY_2 },
+ { 0x33, KEY_3 },
+ { 0x34, KEY_4 },
+ { 0x35, KEY_5 },
+ { 0x36, KEY_6 },
+ { 0x37, KEY_7 },
+ { 0x38, KEY_8 },
+ { 0x39, KEY_9 },
+
+ { 0x2f, KEY_POWER },
+
+ { 0x2e, KEY_P },
+ { 0x1f, KEY_L },
+ { 0x2b, KEY_I },
+
+ { 0x2d, KEY_SCREEN },
+ { 0x1e, KEY_ZOOM },
+ { 0x1b, KEY_VOLUMEUP },
+ { 0x0f, KEY_VOLUMEDOWN },
+ { 0x17, KEY_CHANNELUP },
+ { 0x1c, KEY_CHANNELDOWN },
+ { 0x25, KEY_INFO },
+
+ { 0x3c, KEY_MUTE },
+
+ { 0x3d, KEY_LEFT },
+ { 0x3b, KEY_RIGHT },
+
+ { 0x3f, KEY_UP },
+ { 0x3e, KEY_DOWN },
+ { 0x1a, KEY_ENTER },
+
+ { 0x1d, KEY_MENU },
+ { 0x19, KEY_AGAIN },
+ { 0x16, KEY_PREVIOUSSONG },
+ { 0x13, KEY_NEXTSONG },
+ { 0x15, KEY_PAUSE },
+ { 0x0e, KEY_REWIND },
+ { 0x0d, KEY_PLAY },
+ { 0x0b, KEY_STOP },
+ { 0x07, KEY_FORWARD },
+ { 0x27, KEY_RECORD },
+ { 0x26, KEY_TUNER },
+ { 0x29, KEY_TEXT },
+ { 0x2a, KEY_MEDIA },
+ { 0x18, KEY_EPG },
+};
+
+static struct rc_keymap pinnacle_grey_map = {
+ .map = {
+ .scan = pinnacle_grey,
+ .size = ARRAY_SIZE(pinnacle_grey),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PINNACLE_GREY,
+ }
+};
+
+static int __init init_rc_map_pinnacle_grey(void)
+{
+ return ir_register_map(&pinnacle_grey_map);
+}
+
+static void __exit exit_rc_map_pinnacle_grey(void)
+{
+ ir_unregister_map(&pinnacle_grey_map);
+}
+
+module_init(init_rc_map_pinnacle_grey)
+module_exit(exit_rc_map_pinnacle_grey)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* pinnacle-pctv-hd.h - Keytable for pinnacle_pctv_hd Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Pinnacle PCTV HD 800i mini remote */
+
+static struct ir_scancode pinnacle_pctv_hd[] = {
+
+ { 0x0f, KEY_1 },
+ { 0x15, KEY_2 },
+ { 0x10, KEY_3 },
+ { 0x18, KEY_4 },
+ { 0x1b, KEY_5 },
+ { 0x1e, KEY_6 },
+ { 0x11, KEY_7 },
+ { 0x21, KEY_8 },
+ { 0x12, KEY_9 },
+ { 0x27, KEY_0 },
+
+ { 0x24, KEY_ZOOM },
+ { 0x2a, KEY_SUBTITLE },
+
+ { 0x00, KEY_MUTE },
+ { 0x01, KEY_ENTER }, /* Pinnacle Logo */
+ { 0x39, KEY_POWER },
+
+ { 0x03, KEY_VOLUMEUP },
+ { 0x09, KEY_VOLUMEDOWN },
+ { 0x06, KEY_CHANNELUP },
+ { 0x0c, KEY_CHANNELDOWN },
+
+ { 0x2d, KEY_REWIND },
+ { 0x30, KEY_PLAYPAUSE },
+ { 0x33, KEY_FASTFORWARD },
+ { 0x3c, KEY_STOP },
+ { 0x36, KEY_RECORD },
+ { 0x3f, KEY_EPG }, /* Labeled "?" */
+};
+
+static struct rc_keymap pinnacle_pctv_hd_map = {
+ .map = {
+ .scan = pinnacle_pctv_hd,
+ .size = ARRAY_SIZE(pinnacle_pctv_hd),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PINNACLE_PCTV_HD,
+ }
+};
+
+static int __init init_rc_map_pinnacle_pctv_hd(void)
+{
+ return ir_register_map(&pinnacle_pctv_hd_map);
+}
+
+static void __exit exit_rc_map_pinnacle_pctv_hd(void)
+{
+ ir_unregister_map(&pinnacle_pctv_hd_map);
+}
+
+module_init(init_rc_map_pinnacle_pctv_hd)
+module_exit(exit_rc_map_pinnacle_pctv_hd)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Keytable for MK-F12 IR remote provided together with Pixelview
+ * Ultra Pro Remote Controller. Uses NEC extended format.
+ */
+static struct ir_scancode pixelview_mk12[] = {
+ { 0x866b03, KEY_TUNER }, /* Timeshift */
+ { 0x866b1e, KEY_POWER2 }, /* power */
+
+ { 0x866b01, KEY_1 },
+ { 0x866b0b, KEY_2 },
+ { 0x866b1b, KEY_3 },
+ { 0x866b05, KEY_4 },
+ { 0x866b09, KEY_5 },
+ { 0x866b15, KEY_6 },
+ { 0x866b06, KEY_7 },
+ { 0x866b0a, KEY_8 },
+ { 0x866b12, KEY_9 },
+ { 0x866b02, KEY_0 },
+
+ { 0x866b13, KEY_AGAIN }, /* loop */
+ { 0x866b10, KEY_DIGITS }, /* +100 */
+
+ { 0x866b00, KEY_MEDIA }, /* source */
+ { 0x866b18, KEY_MUTE }, /* mute */
+ { 0x866b19, KEY_CAMERA }, /* snapshot */
+ { 0x866b1a, KEY_SEARCH }, /* scan */
+
+ { 0x866b16, KEY_CHANNELUP }, /* chn + */
+ { 0x866b14, KEY_CHANNELDOWN }, /* chn - */
+ { 0x866b1f, KEY_VOLUMEUP }, /* vol + */
+ { 0x866b17, KEY_VOLUMEDOWN }, /* vol - */
+ { 0x866b1c, KEY_ZOOM }, /* zoom */
+
+ { 0x866b04, KEY_REWIND },
+ { 0x866b0e, KEY_RECORD },
+ { 0x866b0c, KEY_FORWARD },
+
+ { 0x866b1d, KEY_STOP },
+ { 0x866b08, KEY_PLAY },
+ { 0x866b0f, KEY_PAUSE },
+
+ { 0x866b0d, KEY_TV },
+ { 0x866b07, KEY_RADIO }, /* FM */
+};
+
+static struct rc_keymap pixelview_map = {
+ .map = {
+ .scan = pixelview_mk12,
+ .size = ARRAY_SIZE(pixelview_mk12),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_PIXELVIEW_MK12,
+ }
+};
+
+static int __init init_rc_map_pixelview(void)
+{
+ return ir_register_map(&pixelview_map);
+}
+
+static void __exit exit_rc_map_pixelview(void)
+{
+ ir_unregister_map(&pixelview_map);
+}
+
+module_init(init_rc_map_pixelview)
+module_exit(exit_rc_map_pixelview)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* pixelview-new.h - Keytable for pixelview_new Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+ present on PV MPEG 8000GT
+ */
+
+static struct ir_scancode pixelview_new[] = {
+ { 0x3c, KEY_TIME }, /* Timeshift */
+ { 0x12, KEY_POWER },
+
+ { 0x3d, KEY_1 },
+ { 0x38, KEY_2 },
+ { 0x18, KEY_3 },
+ { 0x35, KEY_4 },
+ { 0x39, KEY_5 },
+ { 0x15, KEY_6 },
+ { 0x36, KEY_7 },
+ { 0x3a, KEY_8 },
+ { 0x1e, KEY_9 },
+ { 0x3e, KEY_0 },
+
+ { 0x1c, KEY_AGAIN }, /* LOOP */
+ { 0x3f, KEY_MEDIA }, /* Source */
+ { 0x1f, KEY_LAST }, /* +100 */
+ { 0x1b, KEY_MUTE },
+
+ { 0x17, KEY_CHANNELDOWN },
+ { 0x16, KEY_CHANNELUP },
+ { 0x10, KEY_VOLUMEUP },
+ { 0x14, KEY_VOLUMEDOWN },
+ { 0x13, KEY_ZOOM },
+
+ { 0x19, KEY_CAMERA }, /* SNAPSHOT */
+ { 0x1a, KEY_SEARCH }, /* scan */
+
+ { 0x37, KEY_REWIND }, /* << */
+ { 0x32, KEY_RECORD }, /* o (red) */
+ { 0x33, KEY_FORWARD }, /* >> */
+ { 0x11, KEY_STOP }, /* square */
+ { 0x3b, KEY_PLAY }, /* > */
+ { 0x30, KEY_PLAYPAUSE }, /* || */
+
+ { 0x31, KEY_TV },
+ { 0x34, KEY_RADIO },
+};
+
+static struct rc_keymap pixelview_new_map = {
+ .map = {
+ .scan = pixelview_new,
+ .size = ARRAY_SIZE(pixelview_new),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PIXELVIEW_NEW,
+ }
+};
+
+static int __init init_rc_map_pixelview_new(void)
+{
+ return ir_register_map(&pixelview_new_map);
+}
+
+static void __exit exit_rc_map_pixelview_new(void)
+{
+ ir_unregister_map(&pixelview_new_map);
+}
+
+module_init(init_rc_map_pixelview_new)
+module_exit(exit_rc_map_pixelview_new)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* pixelview.h - Keytable for pixelview Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode pixelview[] = {
+
+ { 0x1e, KEY_POWER }, /* power */
+ { 0x07, KEY_MEDIA }, /* source */
+ { 0x1c, KEY_SEARCH }, /* scan */
+
+
+ { 0x03, KEY_TUNER }, /* TV/FM */
+
+ { 0x00, KEY_RECORD },
+ { 0x08, KEY_STOP },
+ { 0x11, KEY_PLAY },
+
+ { 0x1a, KEY_PLAYPAUSE }, /* freeze */
+ { 0x19, KEY_ZOOM }, /* zoom */
+ { 0x0f, KEY_TEXT }, /* min */
+
+ { 0x01, KEY_1 },
+ { 0x0b, KEY_2 },
+ { 0x1b, KEY_3 },
+ { 0x05, KEY_4 },
+ { 0x09, KEY_5 },
+ { 0x15, KEY_6 },
+ { 0x06, KEY_7 },
+ { 0x0a, KEY_8 },
+ { 0x12, KEY_9 },
+ { 0x02, KEY_0 },
+ { 0x10, KEY_LAST }, /* +100 */
+ { 0x13, KEY_LIST }, /* recall */
+
+ { 0x1f, KEY_CHANNELUP }, /* chn down */
+ { 0x17, KEY_CHANNELDOWN }, /* chn up */
+ { 0x16, KEY_VOLUMEUP }, /* vol down */
+ { 0x14, KEY_VOLUMEDOWN }, /* vol up */
+
+ { 0x04, KEY_KPMINUS }, /* <<< */
+ { 0x0e, KEY_SETUP }, /* function */
+ { 0x0c, KEY_KPPLUS }, /* >>> */
+
+ { 0x0d, KEY_GOTO }, /* mts */
+ { 0x1d, KEY_REFRESH }, /* reset */
+ { 0x18, KEY_MUTE }, /* mute/unmute */
+};
+
+static struct rc_keymap pixelview_map = {
+ .map = {
+ .scan = pixelview,
+ .size = ARRAY_SIZE(pixelview),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PIXELVIEW,
+ }
+};
+
+static int __init init_rc_map_pixelview(void)
+{
+ return ir_register_map(&pixelview_map);
+}
+
+static void __exit exit_rc_map_pixelview(void)
+{
+ ir_unregister_map(&pixelview_map);
+}
+
+module_init(init_rc_map_pixelview)
+module_exit(exit_rc_map_pixelview)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* powercolor-real-angel.h - Keytable for powercolor_real_angel Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Remote control for Powercolor Real Angel 330
+ * Daniel Fraga <fragabr@gmail.com>
+ */
+
+static struct ir_scancode powercolor_real_angel[] = {
+ { 0x38, KEY_SWITCHVIDEOMODE }, /* switch inputs */
+ { 0x0c, KEY_MEDIA }, /* Turn ON/OFF App */
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+ { 0x0a, KEY_DIGITS }, /* single, double, tripple digit */
+ { 0x29, KEY_PREVIOUS }, /* previous channel */
+ { 0x12, KEY_BRIGHTNESSUP },
+ { 0x13, KEY_BRIGHTNESSDOWN },
+ { 0x2b, KEY_MODE }, /* stereo/mono */
+ { 0x2c, KEY_TEXT }, /* teletext */
+ { 0x20, KEY_CHANNELUP }, /* channel up */
+ { 0x21, KEY_CHANNELDOWN }, /* channel down */
+ { 0x10, KEY_VOLUMEUP }, /* volume up */
+ { 0x11, KEY_VOLUMEDOWN }, /* volume down */
+ { 0x0d, KEY_MUTE },
+ { 0x1f, KEY_RECORD },
+ { 0x17, KEY_PLAY },
+ { 0x16, KEY_PAUSE },
+ { 0x0b, KEY_STOP },
+ { 0x27, KEY_FASTFORWARD },
+ { 0x26, KEY_REWIND },
+ { 0x1e, KEY_SEARCH }, /* autoscan */
+ { 0x0e, KEY_CAMERA }, /* snapshot */
+ { 0x2d, KEY_SETUP },
+ { 0x0f, KEY_SCREEN }, /* full screen */
+ { 0x14, KEY_RADIO }, /* FM radio */
+ { 0x25, KEY_POWER }, /* power */
+};
+
+static struct rc_keymap powercolor_real_angel_map = {
+ .map = {
+ .scan = powercolor_real_angel,
+ .size = ARRAY_SIZE(powercolor_real_angel),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_POWERCOLOR_REAL_ANGEL,
+ }
+};
+
+static int __init init_rc_map_powercolor_real_angel(void)
+{
+ return ir_register_map(&powercolor_real_angel_map);
+}
+
+static void __exit exit_rc_map_powercolor_real_angel(void)
+{
+ ir_unregister_map(&powercolor_real_angel_map);
+}
+
+module_init(init_rc_map_powercolor_real_angel)
+module_exit(exit_rc_map_powercolor_real_angel)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* proteus-2309.h - Keytable for proteus_2309 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Michal Majchrowicz <mmajchrowicz@gmail.com> */
+
+static struct ir_scancode proteus_2309[] = {
+ /* numeric */
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ { 0x5c, KEY_POWER }, /* power */
+ { 0x20, KEY_ZOOM }, /* full screen */
+ { 0x0f, KEY_BACKSPACE }, /* recall */
+ { 0x1b, KEY_ENTER }, /* mute */
+ { 0x41, KEY_RECORD }, /* record */
+ { 0x43, KEY_STOP }, /* stop */
+ { 0x16, KEY_S },
+ { 0x1a, KEY_POWER2 }, /* off */
+ { 0x2e, KEY_RED },
+ { 0x1f, KEY_CHANNELDOWN }, /* channel - */
+ { 0x1c, KEY_CHANNELUP }, /* channel + */
+ { 0x10, KEY_VOLUMEDOWN }, /* volume - */
+ { 0x1e, KEY_VOLUMEUP }, /* volume + */
+ { 0x14, KEY_F1 },
+};
+
+static struct rc_keymap proteus_2309_map = {
+ .map = {
+ .scan = proteus_2309,
+ .size = ARRAY_SIZE(proteus_2309),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PROTEUS_2309,
+ }
+};
+
+static int __init init_rc_map_proteus_2309(void)
+{
+ return ir_register_map(&proteus_2309_map);
+}
+
+static void __exit exit_rc_map_proteus_2309(void)
+{
+ ir_unregister_map(&proteus_2309_map);
+}
+
+module_init(init_rc_map_proteus_2309)
+module_exit(exit_rc_map_proteus_2309)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* purpletv.h - Keytable for purpletv Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode purpletv[] = {
+ { 0x03, KEY_POWER },
+ { 0x6f, KEY_MUTE },
+ { 0x10, KEY_BACKSPACE }, /* Recall */
+
+ { 0x11, KEY_0 },
+ { 0x04, KEY_1 },
+ { 0x05, KEY_2 },
+ { 0x06, KEY_3 },
+ { 0x08, KEY_4 },
+ { 0x09, KEY_5 },
+ { 0x0a, KEY_6 },
+ { 0x0c, KEY_7 },
+ { 0x0d, KEY_8 },
+ { 0x0e, KEY_9 },
+ { 0x12, KEY_DOT }, /* 100+ */
+
+ { 0x07, KEY_VOLUMEUP },
+ { 0x0b, KEY_VOLUMEDOWN },
+ { 0x1a, KEY_KPPLUS },
+ { 0x18, KEY_KPMINUS },
+ { 0x15, KEY_UP },
+ { 0x1d, KEY_DOWN },
+ { 0x0f, KEY_CHANNELUP },
+ { 0x13, KEY_CHANNELDOWN },
+ { 0x48, KEY_ZOOM },
+
+ { 0x1b, KEY_VIDEO }, /* Video source */
+ { 0x1f, KEY_CAMERA }, /* Snapshot */
+ { 0x49, KEY_LANGUAGE }, /* MTS Select */
+ { 0x19, KEY_SEARCH }, /* Auto Scan */
+
+ { 0x4b, KEY_RECORD },
+ { 0x46, KEY_PLAY },
+ { 0x45, KEY_PAUSE }, /* Pause */
+ { 0x44, KEY_STOP },
+ { 0x43, KEY_TIME }, /* Time Shift */
+ { 0x17, KEY_CHANNEL }, /* SURF CH */
+ { 0x40, KEY_FORWARD }, /* Forward ? */
+ { 0x42, KEY_REWIND }, /* Backward ? */
+
+};
+
+static struct rc_keymap purpletv_map = {
+ .map = {
+ .scan = purpletv,
+ .size = ARRAY_SIZE(purpletv),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PURPLETV,
+ }
+};
+
+static int __init init_rc_map_purpletv(void)
+{
+ return ir_register_map(&purpletv_map);
+}
+
+static void __exit exit_rc_map_purpletv(void)
+{
+ ir_unregister_map(&purpletv_map);
+}
+
+module_init(init_rc_map_purpletv)
+module_exit(exit_rc_map_purpletv)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* pv951.h - Keytable for pv951 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Mark Phalan <phalanm@o2.ie> */
+
+static struct ir_scancode pv951[] = {
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ { 0x12, KEY_POWER },
+ { 0x10, KEY_MUTE },
+ { 0x1f, KEY_VOLUMEDOWN },
+ { 0x1b, KEY_VOLUMEUP },
+ { 0x1a, KEY_CHANNELUP },
+ { 0x1e, KEY_CHANNELDOWN },
+ { 0x0e, KEY_PAGEUP },
+ { 0x1d, KEY_PAGEDOWN },
+ { 0x13, KEY_SOUND },
+
+ { 0x18, KEY_KPPLUSMINUS }, /* CH +/- */
+ { 0x16, KEY_SUBTITLE }, /* CC */
+ { 0x0d, KEY_TEXT }, /* TTX */
+ { 0x0b, KEY_TV }, /* AIR/CBL */
+ { 0x11, KEY_PC }, /* PC/TV */
+ { 0x17, KEY_OK }, /* CH RTN */
+ { 0x19, KEY_MODE }, /* FUNC */
+ { 0x0c, KEY_SEARCH }, /* AUTOSCAN */
+
+ /* Not sure what to do with these ones! */
+ { 0x0f, KEY_SELECT }, /* SOURCE */
+ { 0x0a, KEY_KPPLUS }, /* +100 */
+ { 0x14, KEY_EQUAL }, /* SYNC */
+ { 0x1c, KEY_MEDIA }, /* PC/TV */
+};
+
+static struct rc_keymap pv951_map = {
+ .map = {
+ .scan = pv951,
+ .size = ARRAY_SIZE(pv951),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_PV951,
+ }
+};
+
+static int __init init_rc_map_pv951(void)
+{
+ return ir_register_map(&pv951_map);
+}
+
+static void __exit exit_rc_map_pv951(void)
+{
+ ir_unregister_map(&pv951_map);
+}
+
+module_init(init_rc_map_pv951)
+module_exit(exit_rc_map_pv951)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc5-hauppauge-new.h - Keytable for rc5_hauppauge_new Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Hauppauge:the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ *
+ * This table contains the complete RC5 code, instead of just the data part
+ */
+
+static struct ir_scancode rc5_hauppauge_new[] = {
+ /* Keys 0 to 9 */
+ { 0x1e00, KEY_0 },
+ { 0x1e01, KEY_1 },
+ { 0x1e02, KEY_2 },
+ { 0x1e03, KEY_3 },
+ { 0x1e04, KEY_4 },
+ { 0x1e05, KEY_5 },
+ { 0x1e06, KEY_6 },
+ { 0x1e07, KEY_7 },
+ { 0x1e08, KEY_8 },
+ { 0x1e09, KEY_9 },
+
+ { 0x1e0a, KEY_TEXT }, /* keypad asterisk as well */
+ { 0x1e0b, KEY_RED }, /* red button */
+ { 0x1e0c, KEY_RADIO },
+ { 0x1e0d, KEY_MENU },
+ { 0x1e0e, KEY_SUBTITLE }, /* also the # key */
+ { 0x1e0f, KEY_MUTE },
+ { 0x1e10, KEY_VOLUMEUP },
+ { 0x1e11, KEY_VOLUMEDOWN },
+ { 0x1e12, KEY_PREVIOUS }, /* previous channel */
+ { 0x1e14, KEY_UP },
+ { 0x1e15, KEY_DOWN },
+ { 0x1e16, KEY_LEFT },
+ { 0x1e17, KEY_RIGHT },
+ { 0x1e18, KEY_VIDEO }, /* Videos */
+ { 0x1e19, KEY_AUDIO }, /* Music */
+ /* 0x1e1a: Pictures - presume this means
+ "Multimedia Home Platform" -
+ no "PICTURES" key in input.h
+ */
+ { 0x1e1a, KEY_MHP },
+
+ { 0x1e1b, KEY_EPG }, /* Guide */
+ { 0x1e1c, KEY_TV },
+ { 0x1e1e, KEY_NEXTSONG }, /* skip >| */
+ { 0x1e1f, KEY_EXIT }, /* back/exit */
+ { 0x1e20, KEY_CHANNELUP }, /* channel / program + */
+ { 0x1e21, KEY_CHANNELDOWN }, /* channel / program - */
+ { 0x1e22, KEY_CHANNEL }, /* source (old black remote) */
+ { 0x1e24, KEY_PREVIOUSSONG }, /* replay |< */
+ { 0x1e25, KEY_ENTER }, /* OK */
+ { 0x1e26, KEY_SLEEP }, /* minimize (old black remote) */
+ { 0x1e29, KEY_BLUE }, /* blue key */
+ { 0x1e2e, KEY_GREEN }, /* green button */
+ { 0x1e30, KEY_PAUSE }, /* pause */
+ { 0x1e32, KEY_REWIND }, /* backward << */
+ { 0x1e34, KEY_FASTFORWARD }, /* forward >> */
+ { 0x1e35, KEY_PLAY },
+ { 0x1e36, KEY_STOP },
+ { 0x1e37, KEY_RECORD }, /* recording */
+ { 0x1e38, KEY_YELLOW }, /* yellow key */
+ { 0x1e3b, KEY_SELECT }, /* top right button */
+ { 0x1e3c, KEY_ZOOM }, /* full */
+ { 0x1e3d, KEY_POWER }, /* system power (green button) */
+};
+
+static struct rc_keymap rc5_hauppauge_new_map = {
+ .map = {
+ .scan = rc5_hauppauge_new,
+ .size = ARRAY_SIZE(rc5_hauppauge_new),
+ .ir_type = IR_TYPE_RC5,
+ .name = RC_MAP_RC5_HAUPPAUGE_NEW,
+ }
+};
+
+static int __init init_rc_map_rc5_hauppauge_new(void)
+{
+ return ir_register_map(&rc5_hauppauge_new_map);
+}
+
+static void __exit exit_rc_map_rc5_hauppauge_new(void)
+{
+ ir_unregister_map(&rc5_hauppauge_new_map);
+}
+
+module_init(init_rc_map_rc5_hauppauge_new)
+module_exit(exit_rc_map_rc5_hauppauge_new)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc5-tv.h - Keytable for rc5_tv Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* generic RC5 keytable */
+/* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
+/* used by old (black) Hauppauge remotes */
+
+static struct ir_scancode rc5_tv[] = {
+ /* Keys 0 to 9 */
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+
+ { 0x0b, KEY_CHANNEL }, /* channel / program (japan: 11) */
+ { 0x0c, KEY_POWER }, /* standby */
+ { 0x0d, KEY_MUTE }, /* mute / demute */
+ { 0x0f, KEY_TV }, /* display */
+ { 0x10, KEY_VOLUMEUP },
+ { 0x11, KEY_VOLUMEDOWN },
+ { 0x12, KEY_BRIGHTNESSUP },
+ { 0x13, KEY_BRIGHTNESSDOWN },
+ { 0x1e, KEY_SEARCH }, /* search + */
+ { 0x20, KEY_CHANNELUP }, /* channel / program + */
+ { 0x21, KEY_CHANNELDOWN }, /* channel / program - */
+ { 0x22, KEY_CHANNEL }, /* alt / channel */
+ { 0x23, KEY_LANGUAGE }, /* 1st / 2nd language */
+ { 0x26, KEY_SLEEP }, /* sleeptimer */
+ { 0x2e, KEY_MENU }, /* 2nd controls (USA: menu) */
+ { 0x30, KEY_PAUSE },
+ { 0x32, KEY_REWIND },
+ { 0x33, KEY_GOTO },
+ { 0x35, KEY_PLAY },
+ { 0x36, KEY_STOP },
+ { 0x37, KEY_RECORD }, /* recording */
+ { 0x3c, KEY_TEXT }, /* teletext submode (Japan: 12) */
+ { 0x3d, KEY_SUSPEND }, /* system standby */
+
+};
+
+static struct rc_keymap rc5_tv_map = {
+ .map = {
+ .scan = rc5_tv,
+ .size = ARRAY_SIZE(rc5_tv),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_RC5_TV,
+ }
+};
+
+static int __init init_rc_map_rc5_tv(void)
+{
+ return ir_register_map(&rc5_tv_map);
+}
+
+static void __exit exit_rc_map_rc5_tv(void)
+{
+ ir_unregister_map(&rc5_tv_map);
+}
+
+module_init(init_rc_map_rc5_tv)
+module_exit(exit_rc_map_rc5_tv)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc-rc6-mce.c - Keytable for Windows Media Center RC-6 remotes for use
+ * with the Media Center Edition eHome Infrared Transceiver.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode rc6_mce[] = {
+
+ { 0x800f0400, KEY_NUMERIC_0 },
+ { 0x800f0401, KEY_NUMERIC_1 },
+ { 0x800f0402, KEY_NUMERIC_2 },
+ { 0x800f0403, KEY_NUMERIC_3 },
+ { 0x800f0404, KEY_NUMERIC_4 },
+ { 0x800f0405, KEY_NUMERIC_5 },
+ { 0x800f0406, KEY_NUMERIC_6 },
+ { 0x800f0407, KEY_NUMERIC_7 },
+ { 0x800f0408, KEY_NUMERIC_8 },
+ { 0x800f0409, KEY_NUMERIC_9 },
+
+ { 0x800f040a, KEY_DELETE },
+ { 0x800f040b, KEY_ENTER },
+ { 0x800f040c, KEY_POWER }, /* PC Power */
+ { 0x800f040d, KEY_PROG1 }, /* Windows MCE button */
+ { 0x800f040e, KEY_MUTE },
+ { 0x800f040f, KEY_INFO },
+
+ { 0x800f0410, KEY_VOLUMEUP },
+ { 0x800f0411, KEY_VOLUMEDOWN },
+ { 0x800f0412, KEY_CHANNELUP },
+ { 0x800f0413, KEY_CHANNELDOWN },
+
+ { 0x800f0414, KEY_FASTFORWARD },
+ { 0x800f0415, KEY_REWIND },
+ { 0x800f0416, KEY_PLAY },
+ { 0x800f0417, KEY_RECORD },
+ { 0x800f0418, KEY_PAUSE },
+ { 0x800f046e, KEY_PLAYPAUSE },
+ { 0x800f0419, KEY_STOP },
+ { 0x800f041a, KEY_NEXT },
+ { 0x800f041b, KEY_PREVIOUS },
+ { 0x800f041c, KEY_NUMERIC_POUND },
+ { 0x800f041d, KEY_NUMERIC_STAR },
+
+ { 0x800f041e, KEY_UP },
+ { 0x800f041f, KEY_DOWN },
+ { 0x800f0420, KEY_LEFT },
+ { 0x800f0421, KEY_RIGHT },
+
+ { 0x800f0422, KEY_OK },
+ { 0x800f0423, KEY_EXIT },
+ { 0x800f0424, KEY_DVD },
+ { 0x800f0425, KEY_TUNER }, /* LiveTV */
+ { 0x800f0426, KEY_EPG }, /* Guide */
+ { 0x800f0427, KEY_ZOOM }, /* Aspect */
+
+ { 0x800f043a, KEY_BRIGHTNESSUP },
+
+ { 0x800f0446, KEY_TV },
+ { 0x800f0447, KEY_AUDIO }, /* My Music */
+ { 0x800f0448, KEY_PVR }, /* RecordedTV */
+ { 0x800f0449, KEY_CAMERA },
+ { 0x800f044a, KEY_VIDEO },
+ { 0x800f044c, KEY_LANGUAGE },
+ { 0x800f044d, KEY_TITLE },
+ { 0x800f044e, KEY_PRINT }, /* Print - HP OEM version of remote */
+
+ { 0x800f0450, KEY_RADIO },
+
+ { 0x800f045a, KEY_SUBTITLE }, /* Caption/Teletext */
+ { 0x800f045b, KEY_RED },
+ { 0x800f045c, KEY_GREEN },
+ { 0x800f045d, KEY_YELLOW },
+ { 0x800f045e, KEY_BLUE },
+
+ { 0x800f0465, KEY_POWER2 }, /* TV Power */
+ { 0x800f046e, KEY_PLAYPAUSE },
+ { 0x800f046f, KEY_MEDIA }, /* Start media application (NEW) */
+
+ { 0x800f0480, KEY_BRIGHTNESSDOWN },
+ { 0x800f0481, KEY_PLAYPAUSE },
+};
+
+static struct rc_keymap rc6_mce_map = {
+ .map = {
+ .scan = rc6_mce,
+ .size = ARRAY_SIZE(rc6_mce),
+ .ir_type = IR_TYPE_RC6,
+ .name = RC_MAP_RC6_MCE,
+ }
+};
+
+static int __init init_rc_map_rc6_mce(void)
+{
+ return ir_register_map(&rc6_mce_map);
+}
+
+static void __exit exit_rc_map_rc6_mce(void)
+{
+ ir_unregister_map(&rc6_mce_map);
+}
+
+module_init(init_rc_map_rc6_mce)
+module_exit(exit_rc_map_rc6_mce)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
--- /dev/null
+/* real-audio-220-32-keys.h - Keytable for real_audio_220_32_keys Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Zogis Real Audio 220 - 32 keys IR */
+
+static struct ir_scancode real_audio_220_32_keys[] = {
+ { 0x1c, KEY_RADIO},
+ { 0x12, KEY_POWER2},
+
+ { 0x01, KEY_1},
+ { 0x02, KEY_2},
+ { 0x03, KEY_3},
+ { 0x04, KEY_4},
+ { 0x05, KEY_5},
+ { 0x06, KEY_6},
+ { 0x07, KEY_7},
+ { 0x08, KEY_8},
+ { 0x09, KEY_9},
+ { 0x00, KEY_0},
+
+ { 0x0c, KEY_VOLUMEUP},
+ { 0x18, KEY_VOLUMEDOWN},
+ { 0x0b, KEY_CHANNELUP},
+ { 0x15, KEY_CHANNELDOWN},
+ { 0x16, KEY_ENTER},
+
+ { 0x11, KEY_LIST}, /* Source */
+ { 0x0d, KEY_AUDIO}, /* stereo */
+
+ { 0x0f, KEY_PREVIOUS}, /* Prev */
+ { 0x1b, KEY_TIME}, /* Timeshift */
+ { 0x1a, KEY_NEXT}, /* Next */
+
+ { 0x0e, KEY_STOP},
+ { 0x1f, KEY_PLAY},
+ { 0x1e, KEY_PLAYPAUSE}, /* Pause */
+
+ { 0x1d, KEY_RECORD},
+ { 0x13, KEY_MUTE},
+ { 0x19, KEY_CAMERA}, /* Snapshot */
+
+};
+
+static struct rc_keymap real_audio_220_32_keys_map = {
+ .map = {
+ .scan = real_audio_220_32_keys,
+ .size = ARRAY_SIZE(real_audio_220_32_keys),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_REAL_AUDIO_220_32_KEYS,
+ }
+};
+
+static int __init init_rc_map_real_audio_220_32_keys(void)
+{
+ return ir_register_map(&real_audio_220_32_keys_map);
+}
+
+static void __exit exit_rc_map_real_audio_220_32_keys(void)
+{
+ ir_unregister_map(&real_audio_220_32_keys_map);
+}
+
+module_init(init_rc_map_real_audio_220_32_keys)
+module_exit(exit_rc_map_real_audio_220_32_keys)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* rc-streamzap.c - Keytable for Streamzap PC Remote, for use
+ * with the Streamzap PC Remote IR Receiver.
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode streamzap[] = {
+/*
+ * The Streamzap remote is almost, but not quite, RC-5, as it has an extra
+ * bit in it, which throws the in-kernel RC-5 decoder for a loop. Currently,
+ * an additional RC-5-sz decoder is being deployed to support it, but it
+ * may be possible to merge it back with the standard RC-5 decoder.
+ */
+ { 0x28c0, KEY_NUMERIC_0 },
+ { 0x28c1, KEY_NUMERIC_1 },
+ { 0x28c2, KEY_NUMERIC_2 },
+ { 0x28c3, KEY_NUMERIC_3 },
+ { 0x28c4, KEY_NUMERIC_4 },
+ { 0x28c5, KEY_NUMERIC_5 },
+ { 0x28c6, KEY_NUMERIC_6 },
+ { 0x28c7, KEY_NUMERIC_7 },
+ { 0x28c8, KEY_NUMERIC_8 },
+ { 0x28c9, KEY_NUMERIC_9 },
+ { 0x28ca, KEY_POWER },
+ { 0x28cb, KEY_MUTE },
+ { 0x28cc, KEY_CHANNELUP },
+ { 0x28cd, KEY_VOLUMEUP },
+ { 0x28ce, KEY_CHANNELDOWN },
+ { 0x28cf, KEY_VOLUMEDOWN },
+ { 0x28d0, KEY_UP },
+ { 0x28d1, KEY_LEFT },
+ { 0x28d2, KEY_OK },
+ { 0x28d3, KEY_RIGHT },
+ { 0x28d4, KEY_DOWN },
+ { 0x28d5, KEY_MENU },
+ { 0x28d6, KEY_EXIT },
+ { 0x28d7, KEY_PLAY },
+ { 0x28d8, KEY_PAUSE },
+ { 0x28d9, KEY_STOP },
+ { 0x28da, KEY_BACK },
+ { 0x28db, KEY_FORWARD },
+ { 0x28dc, KEY_RECORD },
+ { 0x28dd, KEY_REWIND },
+ { 0x28de, KEY_FASTFORWARD },
+ { 0x28e0, KEY_RED },
+ { 0x28e1, KEY_GREEN },
+ { 0x28e2, KEY_YELLOW },
+ { 0x28e3, KEY_BLUE },
+
+};
+
+static struct rc_keymap streamzap_map = {
+ .map = {
+ .scan = streamzap,
+ .size = ARRAY_SIZE(streamzap),
+ .ir_type = IR_TYPE_RC5_SZ,
+ .name = RC_MAP_STREAMZAP,
+ }
+};
+
+static int __init init_rc_map_streamzap(void)
+{
+ return ir_register_map(&streamzap_map);
+}
+
+static void __exit exit_rc_map_streamzap(void)
+{
+ ir_unregister_map(&streamzap_map);
+}
+
+module_init(init_rc_map_streamzap)
+module_exit(exit_rc_map_streamzap)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
--- /dev/null
+/* tbs-nec.h - Keytable for tbs_nec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode tbs_nec[] = {
+ { 0x04, KEY_POWER2}, /*power*/
+ { 0x14, KEY_MUTE}, /*mute*/
+ { 0x07, KEY_1},
+ { 0x06, KEY_2},
+ { 0x05, KEY_3},
+ { 0x0b, KEY_4},
+ { 0x0a, KEY_5},
+ { 0x09, KEY_6},
+ { 0x0f, KEY_7},
+ { 0x0e, KEY_8},
+ { 0x0d, KEY_9},
+ { 0x12, KEY_0},
+ { 0x16, KEY_CHANNELUP}, /*ch+*/
+ { 0x11, KEY_CHANNELDOWN},/*ch-*/
+ { 0x13, KEY_VOLUMEUP}, /*vol+*/
+ { 0x0c, KEY_VOLUMEDOWN},/*vol-*/
+ { 0x03, KEY_RECORD}, /*rec*/
+ { 0x18, KEY_PAUSE}, /*pause*/
+ { 0x19, KEY_OK}, /*ok*/
+ { 0x1a, KEY_CAMERA}, /* snapshot */
+ { 0x01, KEY_UP},
+ { 0x10, KEY_LEFT},
+ { 0x02, KEY_RIGHT},
+ { 0x08, KEY_DOWN},
+ { 0x15, KEY_FAVORITES},
+ { 0x17, KEY_SUBTITLE},
+ { 0x1d, KEY_ZOOM},
+ { 0x1f, KEY_EXIT},
+ { 0x1e, KEY_MENU},
+ { 0x1c, KEY_EPG},
+ { 0x00, KEY_PREVIOUS},
+ { 0x1b, KEY_MODE},
+};
+
+static struct rc_keymap tbs_nec_map = {
+ .map = {
+ .scan = tbs_nec,
+ .size = ARRAY_SIZE(tbs_nec),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_TBS_NEC,
+ }
+};
+
+static int __init init_rc_map_tbs_nec(void)
+{
+ return ir_register_map(&tbs_nec_map);
+}
+
+static void __exit exit_rc_map_tbs_nec(void)
+{
+ ir_unregister_map(&tbs_nec_map);
+}
+
+module_init(init_rc_map_tbs_nec)
+module_exit(exit_rc_map_tbs_nec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* terratec-cinergy-xs.h - Keytable for terratec_cinergy_xs Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Terratec Cinergy Hybrid T USB XS
+ Devin Heitmueller <dheitmueller@linuxtv.org>
+ */
+
+static struct ir_scancode terratec_cinergy_xs[] = {
+ { 0x41, KEY_HOME},
+ { 0x01, KEY_POWER},
+ { 0x42, KEY_MENU},
+ { 0x02, KEY_1},
+ { 0x03, KEY_2},
+ { 0x04, KEY_3},
+ { 0x43, KEY_SUBTITLE},
+ { 0x05, KEY_4},
+ { 0x06, KEY_5},
+ { 0x07, KEY_6},
+ { 0x44, KEY_TEXT},
+ { 0x08, KEY_7},
+ { 0x09, KEY_8},
+ { 0x0a, KEY_9},
+ { 0x45, KEY_DELETE},
+ { 0x0b, KEY_TUNER},
+ { 0x0c, KEY_0},
+ { 0x0d, KEY_MODE},
+ { 0x46, KEY_TV},
+ { 0x47, KEY_DVD},
+ { 0x49, KEY_VIDEO},
+ { 0x4b, KEY_AUX},
+ { 0x10, KEY_UP},
+ { 0x11, KEY_LEFT},
+ { 0x12, KEY_OK},
+ { 0x13, KEY_RIGHT},
+ { 0x14, KEY_DOWN},
+ { 0x0f, KEY_EPG},
+ { 0x16, KEY_INFO},
+ { 0x4d, KEY_BACKSPACE},
+ { 0x1c, KEY_VOLUMEUP},
+ { 0x4c, KEY_PLAY},
+ { 0x1b, KEY_CHANNELUP},
+ { 0x1e, KEY_VOLUMEDOWN},
+ { 0x1d, KEY_MUTE},
+ { 0x1f, KEY_CHANNELDOWN},
+ { 0x17, KEY_RED},
+ { 0x18, KEY_GREEN},
+ { 0x19, KEY_YELLOW},
+ { 0x1a, KEY_BLUE},
+ { 0x58, KEY_RECORD},
+ { 0x48, KEY_STOP},
+ { 0x40, KEY_PAUSE},
+ { 0x54, KEY_LAST},
+ { 0x4e, KEY_REWIND},
+ { 0x4f, KEY_FASTFORWARD},
+ { 0x5c, KEY_NEXT},
+};
+
+static struct rc_keymap terratec_cinergy_xs_map = {
+ .map = {
+ .scan = terratec_cinergy_xs,
+ .size = ARRAY_SIZE(terratec_cinergy_xs),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_TERRATEC_CINERGY_XS,
+ }
+};
+
+static int __init init_rc_map_terratec_cinergy_xs(void)
+{
+ return ir_register_map(&terratec_cinergy_xs_map);
+}
+
+static void __exit exit_rc_map_terratec_cinergy_xs(void)
+{
+ ir_unregister_map(&terratec_cinergy_xs_map);
+}
+
+module_init(init_rc_map_terratec_cinergy_xs)
+module_exit(exit_rc_map_terratec_cinergy_xs)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * TerraTec remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* TerraTec slim remote, 7 rows, 4 columns. */
+/* Uses NEC extended 0x02bd. */
+static struct ir_scancode terratec_slim[] = {
+ { 0x02bd00, KEY_1 },
+ { 0x02bd01, KEY_2 },
+ { 0x02bd02, KEY_3 },
+ { 0x02bd03, KEY_4 },
+ { 0x02bd04, KEY_5 },
+ { 0x02bd05, KEY_6 },
+ { 0x02bd06, KEY_7 },
+ { 0x02bd07, KEY_8 },
+ { 0x02bd08, KEY_9 },
+ { 0x02bd09, KEY_0 },
+ { 0x02bd0a, KEY_MUTE },
+ { 0x02bd0b, KEY_NEW }, /* symbol: PIP */
+ { 0x02bd0e, KEY_VOLUMEDOWN },
+ { 0x02bd0f, KEY_PLAYPAUSE },
+ { 0x02bd10, KEY_RIGHT },
+ { 0x02bd11, KEY_LEFT },
+ { 0x02bd12, KEY_UP },
+ { 0x02bd13, KEY_DOWN },
+ { 0x02bd15, KEY_OK },
+ { 0x02bd16, KEY_STOP },
+ { 0x02bd17, KEY_CAMERA }, /* snapshot */
+ { 0x02bd18, KEY_CHANNELUP },
+ { 0x02bd19, KEY_RECORD },
+ { 0x02bd1a, KEY_CHANNELDOWN },
+ { 0x02bd1c, KEY_ESC },
+ { 0x02bd1f, KEY_VOLUMEUP },
+ { 0x02bd44, KEY_EPG },
+ { 0x02bd45, KEY_POWER2 }, /* [red power button] */
+};
+
+static struct rc_keymap terratec_slim_map = {
+ .map = {
+ .scan = terratec_slim,
+ .size = ARRAY_SIZE(terratec_slim),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_TERRATEC_SLIM,
+ }
+};
+
+static int __init init_rc_map_terratec_slim(void)
+{
+ return ir_register_map(&terratec_slim_map);
+}
+
+static void __exit exit_rc_map_terratec_slim(void)
+{
+ ir_unregister_map(&terratec_slim_map);
+}
+
+module_init(init_rc_map_terratec_slim)
+module_exit(exit_rc_map_terratec_slim)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/* tevii-nec.h - Keytable for tevii_nec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode tevii_nec[] = {
+ { 0x0a, KEY_POWER2},
+ { 0x0c, KEY_MUTE},
+ { 0x11, KEY_1},
+ { 0x12, KEY_2},
+ { 0x13, KEY_3},
+ { 0x14, KEY_4},
+ { 0x15, KEY_5},
+ { 0x16, KEY_6},
+ { 0x17, KEY_7},
+ { 0x18, KEY_8},
+ { 0x19, KEY_9},
+ { 0x10, KEY_0},
+ { 0x1c, KEY_MENU},
+ { 0x0f, KEY_VOLUMEDOWN},
+ { 0x1a, KEY_LAST},
+ { 0x0e, KEY_OPEN},
+ { 0x04, KEY_RECORD},
+ { 0x09, KEY_VOLUMEUP},
+ { 0x08, KEY_CHANNELUP},
+ { 0x07, KEY_PVR},
+ { 0x0b, KEY_TIME},
+ { 0x02, KEY_RIGHT},
+ { 0x03, KEY_LEFT},
+ { 0x00, KEY_UP},
+ { 0x1f, KEY_OK},
+ { 0x01, KEY_DOWN},
+ { 0x05, KEY_TUNER},
+ { 0x06, KEY_CHANNELDOWN},
+ { 0x40, KEY_PLAYPAUSE},
+ { 0x1e, KEY_REWIND},
+ { 0x1b, KEY_FAVORITES},
+ { 0x1d, KEY_BACK},
+ { 0x4d, KEY_FASTFORWARD},
+ { 0x44, KEY_EPG},
+ { 0x4c, KEY_INFO},
+ { 0x41, KEY_AB},
+ { 0x43, KEY_AUDIO},
+ { 0x45, KEY_SUBTITLE},
+ { 0x4a, KEY_LIST},
+ { 0x46, KEY_F1},
+ { 0x47, KEY_F2},
+ { 0x5e, KEY_F3},
+ { 0x5c, KEY_F4},
+ { 0x52, KEY_F5},
+ { 0x5a, KEY_F6},
+ { 0x56, KEY_MODE},
+ { 0x58, KEY_SWITCHVIDEOMODE},
+};
+
+static struct rc_keymap tevii_nec_map = {
+ .map = {
+ .scan = tevii_nec,
+ .size = ARRAY_SIZE(tevii_nec),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_TEVII_NEC,
+ }
+};
+
+static int __init init_rc_map_tevii_nec(void)
+{
+ return ir_register_map(&tevii_nec_map);
+}
+
+static void __exit exit_rc_map_tevii_nec(void)
+{
+ ir_unregister_map(&tevii_nec_map);
+}
+
+module_init(init_rc_map_tevii_nec)
+module_exit(exit_rc_map_tevii_nec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * Total Media In Hand remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* Uses NEC extended 0x02bd */
+static struct ir_scancode total_media_in_hand[] = {
+ { 0x02bd00, KEY_1 },
+ { 0x02bd01, KEY_2 },
+ { 0x02bd02, KEY_3 },
+ { 0x02bd03, KEY_4 },
+ { 0x02bd04, KEY_5 },
+ { 0x02bd05, KEY_6 },
+ { 0x02bd06, KEY_7 },
+ { 0x02bd07, KEY_8 },
+ { 0x02bd08, KEY_9 },
+ { 0x02bd09, KEY_0 },
+ { 0x02bd0a, KEY_MUTE },
+ { 0x02bd0b, KEY_CYCLEWINDOWS }, /* yellow, [min / max] */
+ { 0x02bd0c, KEY_VIDEO }, /* TV / AV */
+ { 0x02bd0e, KEY_VOLUMEDOWN },
+ { 0x02bd0f, KEY_TIME }, /* TimeShift */
+ { 0x02bd10, KEY_RIGHT }, /* right arrow */
+ { 0x02bd11, KEY_LEFT }, /* left arrow */
+ { 0x02bd12, KEY_UP }, /* up arrow */
+ { 0x02bd13, KEY_DOWN }, /* down arrow */
+ { 0x02bd14, KEY_POWER2 }, /* [red] */
+ { 0x02bd15, KEY_OK }, /* OK */
+ { 0x02bd16, KEY_STOP },
+ { 0x02bd17, KEY_CAMERA }, /* Snapshot */
+ { 0x02bd18, KEY_CHANNELUP },
+ { 0x02bd19, KEY_RECORD },
+ { 0x02bd1a, KEY_CHANNELDOWN },
+ { 0x02bd1c, KEY_ESC }, /* Esc */
+ { 0x02bd1e, KEY_PLAY },
+ { 0x02bd1f, KEY_VOLUMEUP },
+ { 0x02bd40, KEY_PAUSE },
+ { 0x02bd41, KEY_FASTFORWARD }, /* FF >> */
+ { 0x02bd42, KEY_REWIND }, /* FR << */
+ { 0x02bd43, KEY_ZOOM }, /* [window + mouse pointer] */
+ { 0x02bd44, KEY_SHUFFLE }, /* Shuffle */
+ { 0x02bd45, KEY_INFO }, /* [red (I)] */
+};
+
+static struct rc_keymap total_media_in_hand_map = {
+ .map = {
+ .scan = total_media_in_hand,
+ .size = ARRAY_SIZE(total_media_in_hand),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_TOTAL_MEDIA_IN_HAND,
+ }
+};
+
+static int __init init_rc_map_total_media_in_hand(void)
+{
+ return ir_register_map(&total_media_in_hand_map);
+}
+
+static void __exit exit_rc_map_total_media_in_hand(void)
+{
+ ir_unregister_map(&total_media_in_hand_map);
+}
+
+module_init(init_rc_map_total_media_in_hand)
+module_exit(exit_rc_map_total_media_in_hand)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/*
+ * TrekStor remote controller keytable
+ *
+ * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <media/rc-map.h>
+
+/* TrekStor DVB-T USB Stick remote controller. */
+/* Imported from af9015.h.
+ Initial keytable was from Marc Schneider <macke@macke.org> */
+static struct ir_scancode trekstor[] = {
+ { 0x0084, KEY_0 },
+ { 0x0085, KEY_MUTE }, /* Mute */
+ { 0x0086, KEY_HOMEPAGE }, /* Home */
+ { 0x0087, KEY_UP }, /* Up */
+ { 0x0088, KEY_OK }, /* OK */
+ { 0x0089, KEY_RIGHT }, /* Right */
+ { 0x008a, KEY_FASTFORWARD }, /* Fast forward */
+ { 0x008b, KEY_VOLUMEUP }, /* Volume + */
+ { 0x008c, KEY_DOWN }, /* Down */
+ { 0x008d, KEY_PLAY }, /* Play/Pause */
+ { 0x008e, KEY_STOP }, /* Stop */
+ { 0x008f, KEY_EPG }, /* Info/EPG */
+ { 0x0090, KEY_7 },
+ { 0x0091, KEY_4 },
+ { 0x0092, KEY_1 },
+ { 0x0093, KEY_CHANNELDOWN }, /* Channel - */
+ { 0x0094, KEY_8 },
+ { 0x0095, KEY_5 },
+ { 0x0096, KEY_2 },
+ { 0x0097, KEY_CHANNELUP }, /* Channel + */
+ { 0x0098, KEY_9 },
+ { 0x0099, KEY_6 },
+ { 0x009a, KEY_3 },
+ { 0x009b, KEY_VOLUMEDOWN }, /* Volume - */
+ { 0x009c, KEY_TV }, /* TV */
+ { 0x009d, KEY_RECORD }, /* Record */
+ { 0x009e, KEY_REWIND }, /* Rewind */
+ { 0x009f, KEY_LEFT }, /* Left */
+};
+
+static struct rc_keymap trekstor_map = {
+ .map = {
+ .scan = trekstor,
+ .size = ARRAY_SIZE(trekstor),
+ .ir_type = IR_TYPE_NEC,
+ .name = RC_MAP_TREKSTOR,
+ }
+};
+
+static int __init init_rc_map_trekstor(void)
+{
+ return ir_register_map(&trekstor_map);
+}
+
+static void __exit exit_rc_map_trekstor(void)
+{
+ ir_unregister_map(&trekstor_map);
+}
+
+module_init(init_rc_map_trekstor)
+module_exit(exit_rc_map_trekstor)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
--- /dev/null
+/* tt-1500.h - Keytable for tt_1500 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* for the Technotrend 1500 bundled remotes (grey and black): */
+
+static struct ir_scancode tt_1500[] = {
+ { 0x01, KEY_POWER },
+ { 0x02, KEY_SHUFFLE }, /* ? double-arrow key */
+ { 0x03, KEY_1 },
+ { 0x04, KEY_2 },
+ { 0x05, KEY_3 },
+ { 0x06, KEY_4 },
+ { 0x07, KEY_5 },
+ { 0x08, KEY_6 },
+ { 0x09, KEY_7 },
+ { 0x0a, KEY_8 },
+ { 0x0b, KEY_9 },
+ { 0x0c, KEY_0 },
+ { 0x0d, KEY_UP },
+ { 0x0e, KEY_LEFT },
+ { 0x0f, KEY_OK },
+ { 0x10, KEY_RIGHT },
+ { 0x11, KEY_DOWN },
+ { 0x12, KEY_INFO },
+ { 0x13, KEY_EXIT },
+ { 0x14, KEY_RED },
+ { 0x15, KEY_GREEN },
+ { 0x16, KEY_YELLOW },
+ { 0x17, KEY_BLUE },
+ { 0x18, KEY_MUTE },
+ { 0x19, KEY_TEXT },
+ { 0x1a, KEY_MODE }, /* ? TV/Radio */
+ { 0x21, KEY_OPTION },
+ { 0x22, KEY_EPG },
+ { 0x23, KEY_CHANNELUP },
+ { 0x24, KEY_CHANNELDOWN },
+ { 0x25, KEY_VOLUMEUP },
+ { 0x26, KEY_VOLUMEDOWN },
+ { 0x27, KEY_SETUP },
+ { 0x3a, KEY_RECORD }, /* these keys are only in the black remote */
+ { 0x3b, KEY_PLAY },
+ { 0x3c, KEY_STOP },
+ { 0x3d, KEY_REWIND },
+ { 0x3e, KEY_PAUSE },
+ { 0x3f, KEY_FORWARD },
+};
+
+static struct rc_keymap tt_1500_map = {
+ .map = {
+ .scan = tt_1500,
+ .size = ARRAY_SIZE(tt_1500),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_TT_1500,
+ }
+};
+
+static int __init init_rc_map_tt_1500(void)
+{
+ return ir_register_map(&tt_1500_map);
+}
+
+static void __exit exit_rc_map_tt_1500(void)
+{
+ ir_unregister_map(&tt_1500_map);
+}
+
+module_init(init_rc_map_tt_1500)
+module_exit(exit_rc_map_tt_1500)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+#include <media/rc-map.h>
+
+static struct ir_scancode twinhan_vp1027[] = {
+ { 0x16, KEY_POWER2 },
+ { 0x17, KEY_FAVORITES },
+ { 0x0f, KEY_TEXT },
+ { 0x48, KEY_INFO},
+ { 0x1c, KEY_EPG },
+ { 0x04, KEY_LIST },
+
+ { 0x03, KEY_1 },
+ { 0x01, KEY_2 },
+ { 0x06, KEY_3 },
+ { 0x09, KEY_4 },
+ { 0x1d, KEY_5 },
+ { 0x1f, KEY_6 },
+ { 0x0d, KEY_7 },
+ { 0x19, KEY_8 },
+ { 0x1b, KEY_9 },
+ { 0x15, KEY_0 },
+
+ { 0x0c, KEY_CANCEL },
+ { 0x4a, KEY_CLEAR },
+ { 0x13, KEY_BACKSPACE },
+ { 0x00, KEY_TAB },
+
+ { 0x4b, KEY_UP },
+ { 0x51, KEY_DOWN },
+ { 0x4e, KEY_LEFT },
+ { 0x52, KEY_RIGHT },
+ { 0x4f, KEY_ENTER },
+
+ { 0x1e, KEY_VOLUMEUP },
+ { 0x0a, KEY_VOLUMEDOWN },
+ { 0x02, KEY_CHANNELDOWN },
+ { 0x05, KEY_CHANNELUP },
+ { 0x11, KEY_RECORD },
+
+ { 0x14, KEY_PLAY },
+ { 0x4c, KEY_PAUSE },
+ { 0x1a, KEY_STOP },
+ { 0x40, KEY_REWIND },
+ { 0x12, KEY_FASTFORWARD },
+ { 0x41, KEY_PREVIOUSSONG },
+ { 0x42, KEY_NEXTSONG },
+ { 0x54, KEY_SAVE },
+ { 0x50, KEY_LANGUAGE },
+ { 0x47, KEY_MEDIA },
+ { 0x4d, KEY_SCREEN },
+ { 0x43, KEY_SUBTITLE },
+ { 0x10, KEY_MUTE },
+ { 0x49, KEY_AUDIO },
+ { 0x07, KEY_SLEEP },
+ { 0x08, KEY_VIDEO },
+ { 0x0e, KEY_AGAIN },
+ { 0x45, KEY_EQUAL },
+ { 0x46, KEY_MINUS },
+ { 0x18, KEY_RED },
+ { 0x53, KEY_GREEN },
+ { 0x5e, KEY_YELLOW },
+ { 0x5f, KEY_BLUE },
+};
+
+static struct rc_keymap twinhan_vp1027_map = {
+ .map = {
+ .scan = twinhan_vp1027,
+ .size = ARRAY_SIZE(twinhan_vp1027),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_TWINHAN_VP1027_DVBS,
+ }
+};
+
+static int __init init_rc_map_twinhan_vp1027(void)
+{
+ return ir_register_map(&twinhan_vp1027_map);
+}
+
+static void __exit exit_rc_map_twinhan_vp1027(void)
+{
+ ir_unregister_map(&twinhan_vp1027_map);
+}
+
+module_init(init_rc_map_twinhan_vp1027)
+module_exit(exit_rc_map_twinhan_vp1027)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sergey Ivanov <123kash@gmail.com>");
--- /dev/null
+/* videomate-s350.h - Keytable for videomate_s350 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode videomate_s350[] = {
+ { 0x00, KEY_TV},
+ { 0x01, KEY_DVD},
+ { 0x04, KEY_RECORD},
+ { 0x05, KEY_VIDEO}, /* TV/Video */
+ { 0x07, KEY_STOP},
+ { 0x08, KEY_PLAYPAUSE},
+ { 0x0a, KEY_REWIND},
+ { 0x0f, KEY_FASTFORWARD},
+ { 0x10, KEY_CHANNELUP},
+ { 0x12, KEY_VOLUMEUP},
+ { 0x13, KEY_CHANNELDOWN},
+ { 0x14, KEY_MUTE},
+ { 0x15, KEY_VOLUMEDOWN},
+ { 0x16, KEY_1},
+ { 0x17, KEY_2},
+ { 0x18, KEY_3},
+ { 0x19, KEY_4},
+ { 0x1a, KEY_5},
+ { 0x1b, KEY_6},
+ { 0x1c, KEY_7},
+ { 0x1d, KEY_8},
+ { 0x1e, KEY_9},
+ { 0x1f, KEY_0},
+ { 0x21, KEY_SLEEP},
+ { 0x24, KEY_ZOOM},
+ { 0x25, KEY_LAST}, /* Recall */
+ { 0x26, KEY_SUBTITLE}, /* CC */
+ { 0x27, KEY_LANGUAGE}, /* MTS */
+ { 0x29, KEY_CHANNEL}, /* SURF */
+ { 0x2b, KEY_A},
+ { 0x2c, KEY_B},
+ { 0x2f, KEY_CAMERA}, /* Snapshot */
+ { 0x23, KEY_RADIO},
+ { 0x02, KEY_PREVIOUSSONG},
+ { 0x06, KEY_NEXTSONG},
+ { 0x03, KEY_EPG},
+ { 0x09, KEY_SETUP},
+ { 0x22, KEY_BACKSPACE},
+ { 0x0c, KEY_UP},
+ { 0x0e, KEY_DOWN},
+ { 0x0b, KEY_LEFT},
+ { 0x0d, KEY_RIGHT},
+ { 0x11, KEY_ENTER},
+ { 0x20, KEY_TEXT},
+};
+
+static struct rc_keymap videomate_s350_map = {
+ .map = {
+ .scan = videomate_s350,
+ .size = ARRAY_SIZE(videomate_s350),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_VIDEOMATE_S350,
+ }
+};
+
+static int __init init_rc_map_videomate_s350(void)
+{
+ return ir_register_map(&videomate_s350_map);
+}
+
+static void __exit exit_rc_map_videomate_s350(void)
+{
+ ir_unregister_map(&videomate_s350_map);
+}
+
+module_init(init_rc_map_videomate_s350)
+module_exit(exit_rc_map_videomate_s350)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* videomate-tv-pvr.h - Keytable for videomate_tv_pvr Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct ir_scancode videomate_tv_pvr[] = {
+ { 0x14, KEY_MUTE },
+ { 0x24, KEY_ZOOM },
+
+ { 0x01, KEY_DVD },
+ { 0x23, KEY_RADIO },
+ { 0x00, KEY_TV },
+
+ { 0x0a, KEY_REWIND },
+ { 0x08, KEY_PLAYPAUSE },
+ { 0x0f, KEY_FORWARD },
+
+ { 0x02, KEY_PREVIOUS },
+ { 0x07, KEY_STOP },
+ { 0x06, KEY_NEXT },
+
+ { 0x0c, KEY_UP },
+ { 0x0e, KEY_DOWN },
+ { 0x0b, KEY_LEFT },
+ { 0x0d, KEY_RIGHT },
+ { 0x11, KEY_OK },
+
+ { 0x03, KEY_MENU },
+ { 0x09, KEY_SETUP },
+ { 0x05, KEY_VIDEO },
+ { 0x22, KEY_CHANNEL },
+
+ { 0x12, KEY_VOLUMEUP },
+ { 0x15, KEY_VOLUMEDOWN },
+ { 0x10, KEY_CHANNELUP },
+ { 0x13, KEY_CHANNELDOWN },
+
+ { 0x04, KEY_RECORD },
+
+ { 0x16, KEY_1 },
+ { 0x17, KEY_2 },
+ { 0x18, KEY_3 },
+ { 0x19, KEY_4 },
+ { 0x1a, KEY_5 },
+ { 0x1b, KEY_6 },
+ { 0x1c, KEY_7 },
+ { 0x1d, KEY_8 },
+ { 0x1e, KEY_9 },
+ { 0x1f, KEY_0 },
+
+ { 0x20, KEY_LANGUAGE },
+ { 0x21, KEY_SLEEP },
+};
+
+static struct rc_keymap videomate_tv_pvr_map = {
+ .map = {
+ .scan = videomate_tv_pvr,
+ .size = ARRAY_SIZE(videomate_tv_pvr),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_VIDEOMATE_TV_PVR,
+ }
+};
+
+static int __init init_rc_map_videomate_tv_pvr(void)
+{
+ return ir_register_map(&videomate_tv_pvr_map);
+}
+
+static void __exit exit_rc_map_videomate_tv_pvr(void)
+{
+ ir_unregister_map(&videomate_tv_pvr_map);
+}
+
+module_init(init_rc_map_videomate_tv_pvr)
+module_exit(exit_rc_map_videomate_tv_pvr)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* winfast-usbii-deluxe.h - Keytable for winfast_usbii_deluxe Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Leadtek Winfast TV USB II Deluxe remote
+ Magnus Alm <magnus.alm@gmail.com>
+ */
+
+static struct ir_scancode winfast_usbii_deluxe[] = {
+ { 0x62, KEY_0},
+ { 0x75, KEY_1},
+ { 0x76, KEY_2},
+ { 0x77, KEY_3},
+ { 0x79, KEY_4},
+ { 0x7a, KEY_5},
+ { 0x7b, KEY_6},
+ { 0x7d, KEY_7},
+ { 0x7e, KEY_8},
+ { 0x7f, KEY_9},
+
+ { 0x38, KEY_CAMERA}, /* SNAPSHOT */
+ { 0x37, KEY_RECORD}, /* RECORD */
+ { 0x35, KEY_TIME}, /* TIMESHIFT */
+
+ { 0x74, KEY_VOLUMEUP}, /* VOLUMEUP */
+ { 0x78, KEY_VOLUMEDOWN}, /* VOLUMEDOWN */
+ { 0x64, KEY_MUTE}, /* MUTE */
+
+ { 0x21, KEY_CHANNEL}, /* SURF */
+ { 0x7c, KEY_CHANNELUP}, /* CHANNELUP */
+ { 0x60, KEY_CHANNELDOWN}, /* CHANNELDOWN */
+ { 0x61, KEY_LAST}, /* LAST CHANNEL (RECALL) */
+
+ { 0x72, KEY_VIDEO}, /* INPUT MODES (TV/FM) */
+
+ { 0x70, KEY_POWER2}, /* TV ON/OFF */
+
+ { 0x39, KEY_CYCLEWINDOWS}, /* MINIMIZE (BOSS) */
+ { 0x3a, KEY_NEW}, /* PIP */
+ { 0x73, KEY_ZOOM}, /* FULLSECREEN */
+
+ { 0x66, KEY_INFO}, /* OSD (DISPLAY) */
+
+ { 0x31, KEY_DOT}, /* '.' */
+ { 0x63, KEY_ENTER}, /* ENTER */
+
+};
+
+static struct rc_keymap winfast_usbii_deluxe_map = {
+ .map = {
+ .scan = winfast_usbii_deluxe,
+ .size = ARRAY_SIZE(winfast_usbii_deluxe),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_WINFAST_USBII_DELUXE,
+ }
+};
+
+static int __init init_rc_map_winfast_usbii_deluxe(void)
+{
+ return ir_register_map(&winfast_usbii_deluxe_map);
+}
+
+static void __exit exit_rc_map_winfast_usbii_deluxe(void)
+{
+ ir_unregister_map(&winfast_usbii_deluxe_map);
+}
+
+module_init(init_rc_map_winfast_usbii_deluxe)
+module_exit(exit_rc_map_winfast_usbii_deluxe)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/* winfast.h - Keytable for winfast Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
+
+static struct ir_scancode winfast[] = {
+ /* Keys 0 to 9 */
+ { 0x12, KEY_0 },
+ { 0x05, KEY_1 },
+ { 0x06, KEY_2 },
+ { 0x07, KEY_3 },
+ { 0x09, KEY_4 },
+ { 0x0a, KEY_5 },
+ { 0x0b, KEY_6 },
+ { 0x0d, KEY_7 },
+ { 0x0e, KEY_8 },
+ { 0x0f, KEY_9 },
+
+ { 0x00, KEY_POWER },
+ { 0x1b, KEY_AUDIO }, /* Audio Source */
+ { 0x02, KEY_TUNER }, /* TV/FM, not on Y0400052 */
+ { 0x1e, KEY_VIDEO }, /* Video Source */
+ { 0x16, KEY_INFO }, /* Display information */
+ { 0x04, KEY_VOLUMEUP },
+ { 0x08, KEY_VOLUMEDOWN },
+ { 0x0c, KEY_CHANNELUP },
+ { 0x10, KEY_CHANNELDOWN },
+ { 0x03, KEY_ZOOM }, /* fullscreen */
+ { 0x1f, KEY_TEXT }, /* closed caption/teletext */
+ { 0x20, KEY_SLEEP },
+ { 0x29, KEY_CLEAR }, /* boss key */
+ { 0x14, KEY_MUTE },
+ { 0x2b, KEY_RED },
+ { 0x2c, KEY_GREEN },
+ { 0x2d, KEY_YELLOW },
+ { 0x2e, KEY_BLUE },
+ { 0x18, KEY_KPPLUS }, /* fine tune + , not on Y040052 */
+ { 0x19, KEY_KPMINUS }, /* fine tune - , not on Y040052 */
+ { 0x2a, KEY_MEDIA }, /* PIP (Picture in picture */
+ { 0x21, KEY_DOT },
+ { 0x13, KEY_ENTER },
+ { 0x11, KEY_LAST }, /* Recall (last channel */
+ { 0x22, KEY_PREVIOUS },
+ { 0x23, KEY_PLAYPAUSE },
+ { 0x24, KEY_NEXT },
+ { 0x25, KEY_TIME }, /* Time Shifting */
+ { 0x26, KEY_STOP },
+ { 0x27, KEY_RECORD },
+ { 0x28, KEY_SAVE }, /* Screenshot */
+ { 0x2f, KEY_MENU },
+ { 0x30, KEY_CANCEL },
+ { 0x31, KEY_CHANNEL }, /* Channel Surf */
+ { 0x32, KEY_SUBTITLE },
+ { 0x33, KEY_LANGUAGE },
+ { 0x34, KEY_REWIND },
+ { 0x35, KEY_FASTFORWARD },
+ { 0x36, KEY_TV },
+ { 0x37, KEY_RADIO }, /* FM */
+ { 0x38, KEY_DVD },
+
+ { 0x1a, KEY_MODE}, /* change to MCE mode on Y04G0051 */
+ { 0x3e, KEY_F21 }, /* MCE +VOL, on Y04G0033 */
+ { 0x3a, KEY_F22 }, /* MCE -VOL, on Y04G0033 */
+ { 0x3b, KEY_F23 }, /* MCE +CH, on Y04G0033 */
+ { 0x3f, KEY_F24 } /* MCE -CH, on Y04G0033 */
+};
+
+static struct rc_keymap winfast_map = {
+ .map = {
+ .scan = winfast,
+ .size = ARRAY_SIZE(winfast),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_WINFAST,
+ }
+};
+
+static int __init init_rc_map_winfast(void)
+{
+ return ir_register_map(&winfast_map);
+}
+
+static void __exit exit_rc_map_winfast(void)
+{
+ ir_unregister_map(&winfast_map);
+}
+
+module_init(init_rc_map_winfast)
+module_exit(exit_rc_map_winfast)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
--- /dev/null
+/*
+ * LIRC base driver
+ *
+ * by Artur Lipowski <alipowski@interia.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/ioctl.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/kthread.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/cdev.h>
+
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+static int debug;
+
+#define IRCTL_DEV_NAME "BaseRemoteCtl"
+#define NOPLUG -1
+#define LOGHEAD "lirc_dev (%s[%d]): "
+
+static dev_t lirc_base_dev;
+
+struct irctl {
+ struct lirc_driver d;
+ int attached;
+ int open;
+
+ struct mutex irctl_lock;
+ struct lirc_buffer *buf;
+ unsigned int chunk_size;
+
+ struct task_struct *task;
+ long jiffies_to_wait;
+};
+
+static DEFINE_MUTEX(lirc_dev_lock);
+
+static struct irctl *irctls[MAX_IRCTL_DEVICES];
+static struct cdev cdevs[MAX_IRCTL_DEVICES];
+
+/* Only used for sysfs but defined to void otherwise */
+static struct class *lirc_class;
+
+/* helper function
+ * initializes the irctl structure
+ */
+static void lirc_irctl_init(struct irctl *ir)
+{
+ mutex_init(&ir->irctl_lock);
+ ir->d.minor = NOPLUG;
+}
+
+static void lirc_irctl_cleanup(struct irctl *ir)
+{
+ dev_dbg(ir->d.dev, LOGHEAD "cleaning up\n", ir->d.name, ir->d.minor);
+
+ device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
+
+ if (ir->buf != ir->d.rbuf) {
+ lirc_buffer_free(ir->buf);
+ kfree(ir->buf);
+ }
+ ir->buf = NULL;
+}
+
+/* helper function
+ * reads key codes from driver and puts them into buffer
+ * returns 0 on success
+ */
+static int lirc_add_to_buf(struct irctl *ir)
+{
+ if (ir->d.add_to_buf) {
+ int res = -ENODATA;
+ int got_data = 0;
+
+ /*
+ * service the device as long as it is returning
+ * data and we have space
+ */
+get_data:
+ res = ir->d.add_to_buf(ir->d.data, ir->buf);
+ if (res == 0) {
+ got_data++;
+ goto get_data;
+ }
+
+ if (res == -ENODEV)
+ kthread_stop(ir->task);
+
+ return got_data ? 0 : res;
+ }
+
+ return 0;
+}
+
+/* main function of the polling thread
+ */
+static int lirc_thread(void *irctl)
+{
+ struct irctl *ir = irctl;
+
+ dev_dbg(ir->d.dev, LOGHEAD "poll thread started\n",
+ ir->d.name, ir->d.minor);
+
+ do {
+ if (ir->open) {
+ if (ir->jiffies_to_wait) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(ir->jiffies_to_wait);
+ }
+ if (kthread_should_stop())
+ break;
+ if (!lirc_add_to_buf(ir))
+ wake_up_interruptible(&ir->buf->wait_poll);
+ } else {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ }
+ } while (!kthread_should_stop());
+
+ dev_dbg(ir->d.dev, LOGHEAD "poll thread ended\n",
+ ir->d.name, ir->d.minor);
+
+ return 0;
+}
+
+
+static struct file_operations lirc_dev_fops = {
+ .owner = THIS_MODULE,
+ .read = lirc_dev_fop_read,
+ .write = lirc_dev_fop_write,
+ .poll = lirc_dev_fop_poll,
+ .unlocked_ioctl = lirc_dev_fop_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = lirc_dev_fop_ioctl,
+#endif
+ .open = lirc_dev_fop_open,
+ .release = lirc_dev_fop_close,
+ .llseek = noop_llseek,
+};
+
+static int lirc_cdev_add(struct irctl *ir)
+{
+ int retval;
+ struct lirc_driver *d = &ir->d;
+ struct cdev *cdev = &cdevs[d->minor];
+
+ if (d->fops) {
+ cdev_init(cdev, d->fops);
+ cdev->owner = d->owner;
+ } else {
+ cdev_init(cdev, &lirc_dev_fops);
+ cdev->owner = THIS_MODULE;
+ }
+ kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
+
+ retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
+ if (retval)
+ kobject_put(&cdev->kobj);
+
+ return retval;
+}
+
+int lirc_register_driver(struct lirc_driver *d)
+{
+ struct irctl *ir;
+ int minor;
+ int bytes_in_key;
+ unsigned int chunk_size;
+ unsigned int buffer_size;
+ int err;
+
+ if (!d) {
+ printk(KERN_ERR "lirc_dev: lirc_register_driver: "
+ "driver pointer must be not NULL!\n");
+ err = -EBADRQC;
+ goto out;
+ }
+
+ if (!d->dev) {
+ printk(KERN_ERR "%s: dev pointer not filled in!\n", __func__);
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (MAX_IRCTL_DEVICES <= d->minor) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "\"minor\" must be between 0 and %d (%d)!\n",
+ MAX_IRCTL_DEVICES-1, d->minor);
+ err = -EBADRQC;
+ goto out;
+ }
+
+ if (1 > d->code_length || (BUFLEN * 8) < d->code_length) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "code length in bits for minor (%d) "
+ "must be less than %d!\n",
+ d->minor, BUFLEN * 8);
+ err = -EBADRQC;
+ goto out;
+ }
+
+ dev_dbg(d->dev, "lirc_dev: lirc_register_driver: sample_rate: %d\n",
+ d->sample_rate);
+ if (d->sample_rate) {
+ if (2 > d->sample_rate || HZ < d->sample_rate) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "sample_rate must be between 2 and %d!\n", HZ);
+ err = -EBADRQC;
+ goto out;
+ }
+ if (!d->add_to_buf) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "add_to_buf cannot be NULL when "
+ "sample_rate is set\n");
+ err = -EBADRQC;
+ goto out;
+ }
+ } else if (!(d->fops && d->fops->read) && !d->rbuf) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "fops->read and rbuf cannot all be NULL!\n");
+ err = -EBADRQC;
+ goto out;
+ } else if (!d->rbuf) {
+ if (!(d->fops && d->fops->read && d->fops->poll &&
+ d->fops->unlocked_ioctl)) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "neither read, poll nor unlocked_ioctl can be NULL!\n");
+ err = -EBADRQC;
+ goto out;
+ }
+ }
+
+ mutex_lock(&lirc_dev_lock);
+
+ minor = d->minor;
+
+ if (minor < 0) {
+ /* find first free slot for driver */
+ for (minor = 0; minor < MAX_IRCTL_DEVICES; minor++)
+ if (!irctls[minor])
+ break;
+ if (MAX_IRCTL_DEVICES == minor) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "no free slots for drivers!\n");
+ err = -ENOMEM;
+ goto out_lock;
+ }
+ } else if (irctls[minor]) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "minor (%d) just registered!\n", minor);
+ err = -EBUSY;
+ goto out_lock;
+ }
+
+ ir = kzalloc(sizeof(struct irctl), GFP_KERNEL);
+ if (!ir) {
+ err = -ENOMEM;
+ goto out_lock;
+ }
+ lirc_irctl_init(ir);
+ irctls[minor] = ir;
+ d->minor = minor;
+
+ if (d->sample_rate) {
+ ir->jiffies_to_wait = HZ / d->sample_rate;
+ } else {
+ /* it means - wait for external event in task queue */
+ ir->jiffies_to_wait = 0;
+ }
+
+ /* some safety check 8-) */
+ d->name[sizeof(d->name)-1] = '\0';
+
+ bytes_in_key = BITS_TO_LONGS(d->code_length) +
+ (d->code_length % 8 ? 1 : 0);
+ buffer_size = d->buffer_size ? d->buffer_size : BUFLEN / bytes_in_key;
+ chunk_size = d->chunk_size ? d->chunk_size : bytes_in_key;
+
+ if (d->rbuf) {
+ ir->buf = d->rbuf;
+ } else {
+ ir->buf = kmalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+ if (!ir->buf) {
+ err = -ENOMEM;
+ goto out_lock;
+ }
+ err = lirc_buffer_init(ir->buf, chunk_size, buffer_size);
+ if (err) {
+ kfree(ir->buf);
+ goto out_lock;
+ }
+ }
+ ir->chunk_size = ir->buf->chunk_size;
+
+ if (d->features == 0)
+ d->features = LIRC_CAN_REC_LIRCCODE;
+
+ ir->d = *d;
+
+ device_create(lirc_class, ir->d.dev,
+ MKDEV(MAJOR(lirc_base_dev), ir->d.minor), NULL,
+ "lirc%u", ir->d.minor);
+
+ if (d->sample_rate) {
+ /* try to fire up polling thread */
+ ir->task = kthread_run(lirc_thread, (void *)ir, "lirc_dev");
+ if (IS_ERR(ir->task)) {
+ dev_err(d->dev, "lirc_dev: lirc_register_driver: "
+ "cannot run poll thread for minor = %d\n",
+ d->minor);
+ err = -ECHILD;
+ goto out_sysfs;
+ }
+ }
+
+ err = lirc_cdev_add(ir);
+ if (err)
+ goto out_sysfs;
+
+ ir->attached = 1;
+ mutex_unlock(&lirc_dev_lock);
+
+ dev_info(ir->d.dev, "lirc_dev: driver %s registered at minor = %d\n",
+ ir->d.name, ir->d.minor);
+ return minor;
+
+out_sysfs:
+ device_destroy(lirc_class, MKDEV(MAJOR(lirc_base_dev), ir->d.minor));
+out_lock:
+ mutex_unlock(&lirc_dev_lock);
+out:
+ return err;
+}
+EXPORT_SYMBOL(lirc_register_driver);
+
+int lirc_unregister_driver(int minor)
+{
+ struct irctl *ir;
+ struct cdev *cdev;
+
+ if (minor < 0 || minor >= MAX_IRCTL_DEVICES) {
+ printk(KERN_ERR "lirc_dev: %s: minor (%d) must be between "
+ "0 and %d!\n", __func__, minor, MAX_IRCTL_DEVICES-1);
+ return -EBADRQC;
+ }
+
+ ir = irctls[minor];
+ if (!ir) {
+ printk(KERN_ERR "lirc_dev: %s: failed to get irctl struct "
+ "for minor %d!\n", __func__, minor);
+ return -ENOENT;
+ }
+
+ cdev = &cdevs[minor];
+
+ mutex_lock(&lirc_dev_lock);
+
+ if (ir->d.minor != minor) {
+ printk(KERN_ERR "lirc_dev: %s: minor (%d) device not "
+ "registered!\n", __func__, minor);
+ mutex_unlock(&lirc_dev_lock);
+ return -ENOENT;
+ }
+
+ /* end up polling thread */
+ if (ir->task)
+ kthread_stop(ir->task);
+
+ dev_dbg(ir->d.dev, "lirc_dev: driver %s unregistered from minor = %d\n",
+ ir->d.name, ir->d.minor);
+
+ ir->attached = 0;
+ if (ir->open) {
+ dev_dbg(ir->d.dev, LOGHEAD "releasing opened driver\n",
+ ir->d.name, ir->d.minor);
+ wake_up_interruptible(&ir->buf->wait_poll);
+ mutex_lock(&ir->irctl_lock);
+ ir->d.set_use_dec(ir->d.data);
+ module_put(cdev->owner);
+ mutex_unlock(&ir->irctl_lock);
+ } else {
+ lirc_irctl_cleanup(ir);
+ cdev_del(cdev);
+ kfree(ir);
+ irctls[minor] = NULL;
+ }
+
+ mutex_unlock(&lirc_dev_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(lirc_unregister_driver);
+
+int lirc_dev_fop_open(struct inode *inode, struct file *file)
+{
+ struct irctl *ir;
+ struct cdev *cdev;
+ int retval = 0;
+
+ if (iminor(inode) >= MAX_IRCTL_DEVICES) {
+ printk(KERN_WARNING "lirc_dev [%d]: open result = -ENODEV\n",
+ iminor(inode));
+ return -ENODEV;
+ }
+
+ if (mutex_lock_interruptible(&lirc_dev_lock))
+ return -ERESTARTSYS;
+
+ ir = irctls[iminor(inode)];
+ if (!ir) {
+ retval = -ENODEV;
+ goto error;
+ }
+
+ dev_dbg(ir->d.dev, LOGHEAD "open called\n", ir->d.name, ir->d.minor);
+
+ if (ir->d.minor == NOPLUG) {
+ retval = -ENODEV;
+ goto error;
+ }
+
+ if (ir->open) {
+ retval = -EBUSY;
+ goto error;
+ }
+
+ cdev = &cdevs[iminor(inode)];
+ if (try_module_get(cdev->owner)) {
+ ir->open++;
+ retval = ir->d.set_use_inc(ir->d.data);
+
+ if (retval) {
+ module_put(cdev->owner);
+ ir->open--;
+ } else {
+ lirc_buffer_clear(ir->buf);
+ }
+ if (ir->task)
+ wake_up_process(ir->task);
+ }
+
+error:
+ if (ir)
+ dev_dbg(ir->d.dev, LOGHEAD "open result = %d\n",
+ ir->d.name, ir->d.minor, retval);
+
+ mutex_unlock(&lirc_dev_lock);
+
+ nonseekable_open(inode, file);
+
+ return retval;
+}
+EXPORT_SYMBOL(lirc_dev_fop_open);
+
+int lirc_dev_fop_close(struct inode *inode, struct file *file)
+{
+ struct irctl *ir = irctls[iminor(inode)];
+ struct cdev *cdev = &cdevs[iminor(inode)];
+
+ if (!ir) {
+ printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+ return -EINVAL;
+ }
+
+ dev_dbg(ir->d.dev, LOGHEAD "close called\n", ir->d.name, ir->d.minor);
+
+ WARN_ON(mutex_lock_killable(&lirc_dev_lock));
+
+ ir->open--;
+ if (ir->attached) {
+ ir->d.set_use_dec(ir->d.data);
+ module_put(cdev->owner);
+ } else {
+ lirc_irctl_cleanup(ir);
+ cdev_del(cdev);
+ irctls[ir->d.minor] = NULL;
+ kfree(ir);
+ }
+
+ mutex_unlock(&lirc_dev_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(lirc_dev_fop_close);
+
+unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait)
+{
+ struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+ unsigned int ret;
+
+ if (!ir) {
+ printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+ return POLLERR;
+ }
+
+ dev_dbg(ir->d.dev, LOGHEAD "poll called\n", ir->d.name, ir->d.minor);
+
+ if (!ir->attached)
+ return POLLERR;
+
+ poll_wait(file, &ir->buf->wait_poll, wait);
+
+ if (ir->buf)
+ if (lirc_buffer_empty(ir->buf))
+ ret = 0;
+ else
+ ret = POLLIN | POLLRDNORM;
+ else
+ ret = POLLERR;
+
+ dev_dbg(ir->d.dev, LOGHEAD "poll result = %d\n",
+ ir->d.name, ir->d.minor, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL(lirc_dev_fop_poll);
+
+long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ __u32 mode;
+ int result = 0;
+ struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+
+ if (!ir) {
+ printk(KERN_ERR "lirc_dev: %s: no irctl found!\n", __func__);
+ return -ENODEV;
+ }
+
+ dev_dbg(ir->d.dev, LOGHEAD "ioctl called (0x%x)\n",
+ ir->d.name, ir->d.minor, cmd);
+
+ if (ir->d.minor == NOPLUG || !ir->attached) {
+ dev_dbg(ir->d.dev, LOGHEAD "ioctl result = -ENODEV\n",
+ ir->d.name, ir->d.minor);
+ return -ENODEV;
+ }
+
+ mutex_lock(&ir->irctl_lock);
+
+ switch (cmd) {
+ case LIRC_GET_FEATURES:
+ result = put_user(ir->d.features, (__u32 *)arg);
+ break;
+ case LIRC_GET_REC_MODE:
+ if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
+ result = -ENOSYS;
+ break;
+ }
+
+ result = put_user(LIRC_REC2MODE
+ (ir->d.features & LIRC_CAN_REC_MASK),
+ (__u32 *)arg);
+ break;
+ case LIRC_SET_REC_MODE:
+ if (!(ir->d.features & LIRC_CAN_REC_MASK)) {
+ result = -ENOSYS;
+ break;
+ }
+
+ result = get_user(mode, (__u32 *)arg);
+ if (!result && !(LIRC_MODE2REC(mode) & ir->d.features))
+ result = -EINVAL;
+ /*
+ * FIXME: We should actually set the mode somehow but
+ * for now, lirc_serial doesn't support mode changing either
+ */
+ break;
+ case LIRC_GET_LENGTH:
+ result = put_user(ir->d.code_length, (__u32 *)arg);
+ break;
+ case LIRC_GET_MIN_TIMEOUT:
+ if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
+ ir->d.min_timeout == 0) {
+ result = -ENOSYS;
+ break;
+ }
+
+ result = put_user(ir->d.min_timeout, (__u32 *)arg);
+ break;
+ case LIRC_GET_MAX_TIMEOUT:
+ if (!(ir->d.features & LIRC_CAN_SET_REC_TIMEOUT) ||
+ ir->d.max_timeout == 0) {
+ result = -ENOSYS;
+ break;
+ }
+
+ result = put_user(ir->d.max_timeout, (__u32 *)arg);
+ break;
+ default:
+ result = -EINVAL;
+ }
+
+ dev_dbg(ir->d.dev, LOGHEAD "ioctl result = %d\n",
+ ir->d.name, ir->d.minor, result);
+
+ mutex_unlock(&ir->irctl_lock);
+
+ return result;
+}
+EXPORT_SYMBOL(lirc_dev_fop_ioctl);
+
+ssize_t lirc_dev_fop_read(struct file *file,
+ char *buffer,
+ size_t length,
+ loff_t *ppos)
+{
+ struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+ unsigned char *buf;
+ int ret = 0, written = 0;
+ DECLARE_WAITQUEUE(wait, current);
+
+ if (!ir) {
+ printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+ return -ENODEV;
+ }
+
+ dev_dbg(ir->d.dev, LOGHEAD "read called\n", ir->d.name, ir->d.minor);
+
+ buf = kzalloc(ir->chunk_size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ if (mutex_lock_interruptible(&ir->irctl_lock)) {
+ ret = -ERESTARTSYS;
+ goto out_unlocked;
+ }
+ if (!ir->attached) {
+ ret = -ENODEV;
+ goto out_locked;
+ }
+
+ if (length % ir->chunk_size) {
+ ret = -EINVAL;
+ goto out_locked;
+ }
+
+ /*
+ * we add ourselves to the task queue before buffer check
+ * to avoid losing scan code (in case when queue is awaken somewhere
+ * between while condition checking and scheduling)
+ */
+ add_wait_queue(&ir->buf->wait_poll, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /*
+ * while we didn't provide 'length' bytes, device is opened in blocking
+ * mode and 'copy_to_user' is happy, wait for data.
+ */
+ while (written < length && ret == 0) {
+ if (lirc_buffer_empty(ir->buf)) {
+ /* According to the read(2) man page, 'written' can be
+ * returned as less than 'length', instead of blocking
+ * again, returning -EWOULDBLOCK, or returning
+ * -ERESTARTSYS */
+ if (written)
+ break;
+ if (file->f_flags & O_NONBLOCK) {
+ ret = -EWOULDBLOCK;
+ break;
+ }
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+
+ mutex_unlock(&ir->irctl_lock);
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (mutex_lock_interruptible(&ir->irctl_lock)) {
+ ret = -ERESTARTSYS;
+ remove_wait_queue(&ir->buf->wait_poll, &wait);
+ set_current_state(TASK_RUNNING);
+ goto out_unlocked;
+ }
+
+ if (!ir->attached) {
+ ret = -ENODEV;
+ break;
+ }
+ } else {
+ lirc_buffer_read(ir->buf, buf);
+ ret = copy_to_user((void *)buffer+written, buf,
+ ir->buf->chunk_size);
+ if (!ret)
+ written += ir->buf->chunk_size;
+ else
+ ret = -EFAULT;
+ }
+ }
+
+ remove_wait_queue(&ir->buf->wait_poll, &wait);
+ set_current_state(TASK_RUNNING);
+
+out_locked:
+ mutex_unlock(&ir->irctl_lock);
+
+out_unlocked:
+ kfree(buf);
+ dev_dbg(ir->d.dev, LOGHEAD "read result = %s (%d)\n",
+ ir->d.name, ir->d.minor, ret ? "<fail>" : "<ok>", ret);
+
+ return ret ? ret : written;
+}
+EXPORT_SYMBOL(lirc_dev_fop_read);
+
+void *lirc_get_pdata(struct file *file)
+{
+ void *data = NULL;
+
+ if (file && file->f_dentry && file->f_dentry->d_inode &&
+ file->f_dentry->d_inode->i_rdev) {
+ struct irctl *ir;
+ ir = irctls[iminor(file->f_dentry->d_inode)];
+ data = ir->d.data;
+ }
+
+ return data;
+}
+EXPORT_SYMBOL(lirc_get_pdata);
+
+
+ssize_t lirc_dev_fop_write(struct file *file, const char *buffer,
+ size_t length, loff_t *ppos)
+{
+ struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
+
+ if (!ir) {
+ printk(KERN_ERR "%s: called with invalid irctl\n", __func__);
+ return -ENODEV;
+ }
+
+ dev_dbg(ir->d.dev, LOGHEAD "write called\n", ir->d.name, ir->d.minor);
+
+ if (!ir->attached)
+ return -ENODEV;
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(lirc_dev_fop_write);
+
+
+static int __init lirc_dev_init(void)
+{
+ int retval;
+
+ lirc_class = class_create(THIS_MODULE, "lirc");
+ if (IS_ERR(lirc_class)) {
+ retval = PTR_ERR(lirc_class);
+ printk(KERN_ERR "lirc_dev: class_create failed\n");
+ goto error;
+ }
+
+ retval = alloc_chrdev_region(&lirc_base_dev, 0, MAX_IRCTL_DEVICES,
+ IRCTL_DEV_NAME);
+ if (retval) {
+ class_destroy(lirc_class);
+ printk(KERN_ERR "lirc_dev: alloc_chrdev_region failed\n");
+ goto error;
+ }
+
+
+ printk(KERN_INFO "lirc_dev: IR Remote Control driver registered, "
+ "major %d \n", MAJOR(lirc_base_dev));
+
+error:
+ return retval;
+}
+
+
+
+static void __exit lirc_dev_exit(void)
+{
+ class_destroy(lirc_class);
+ unregister_chrdev_region(lirc_base_dev, MAX_IRCTL_DEVICES);
+ printk(KERN_INFO "lirc_dev: module unloaded\n");
+}
+
+module_init(lirc_dev_init);
+module_exit(lirc_dev_exit);
+
+MODULE_DESCRIPTION("LIRC base driver module");
+MODULE_AUTHOR("Artur Lipowski");
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
--- /dev/null
+/*
+ * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers
+ *
+ * Copyright (c) 2010 by Jarod Wilson <jarod@redhat.com>
+ *
+ * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan
+ * Conti, Martin Blatter and Daniel Melander, the latter of which was
+ * in turn also based on the lirc_atiusb driver by Paul Miller. The
+ * two mce drivers were merged into one by Jarod Wilson, with transmit
+ * support for the 1st-gen device added primarily by Patrick Calhoun,
+ * with a bit of tweaks by Jarod. Debugging improvements and proper
+ * support for what appears to be 3rd-gen hardware added by Jarod.
+ * Initial port from lirc driver to ir-core drivery by Jarod, based
+ * partially on a port to an earlier proposed IR infrastructure by
+ * Jon Smirl, which included enhancements and simplifications to the
+ * incoming IR buffer parsing routines.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/ir-core.h>
+
+#define DRIVER_VERSION "1.91"
+#define DRIVER_AUTHOR "Jarod Wilson <jarod@wilsonet.com>"
+#define DRIVER_DESC "Windows Media Center Ed. eHome Infrared Transceiver " \
+ "device driver"
+#define DRIVER_NAME "mceusb"
+
+#define USB_BUFLEN 32 /* USB reception buffer length */
+#define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */
+#define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */
+#define MS_TO_NS(msec) ((msec) * 1000)
+
+/* MCE constants */
+#define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */
+#define MCE_TIME_UNIT 50 /* Approx 50us resolution */
+#define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */
+#define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */
+#define MCE_IRDATA_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */
+#define MCE_IRDATA_TRAILER 0x80 /* End of IR data */
+#define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */
+#define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */
+#define MCE_DEFAULT_TX_MASK 0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */
+#define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */
+#define MCE_PULSE_MASK 0x7f /* Pulse mask */
+#define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */
+
+#define MCE_HW_CMD_HEADER 0xff /* MCE hardware command header */
+#define MCE_COMMAND_HEADER 0x9f /* MCE command header */
+#define MCE_COMMAND_MASK 0xe0 /* Mask out command bits */
+#define MCE_COMMAND_NULL 0x00 /* These show up various places... */
+/* if buf[i] & MCE_COMMAND_MASK == 0x80 and buf[i] != MCE_COMMAND_HEADER,
+ * then we're looking at a raw IR data sample */
+#define MCE_COMMAND_IRDATA 0x80
+#define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */
+
+/* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */
+#define MCE_CMD_SIG_END 0x01 /* End of signal */
+#define MCE_CMD_PING 0x03 /* Ping device */
+#define MCE_CMD_UNKNOWN 0x04 /* Unknown */
+#define MCE_CMD_UNKNOWN2 0x05 /* Unknown */
+#define MCE_CMD_S_CARRIER 0x06 /* Set TX carrier frequency */
+#define MCE_CMD_G_CARRIER 0x07 /* Get TX carrier frequency */
+#define MCE_CMD_S_TXMASK 0x08 /* Set TX port bitmask */
+#define MCE_CMD_UNKNOWN3 0x09 /* Unknown */
+#define MCE_CMD_UNKNOWN4 0x0a /* Unknown */
+#define MCE_CMD_G_REVISION 0x0b /* Get hw/sw revision */
+#define MCE_CMD_S_TIMEOUT 0x0c /* Set RX timeout value */
+#define MCE_CMD_G_TIMEOUT 0x0d /* Get RX timeout value */
+#define MCE_CMD_UNKNOWN5 0x0e /* Unknown */
+#define MCE_CMD_UNKNOWN6 0x0f /* Unknown */
+#define MCE_CMD_G_RXPORTSTS 0x11 /* Get RX port status */
+#define MCE_CMD_G_TXMASK 0x13 /* Set TX port bitmask */
+#define MCE_CMD_S_RXSENSOR 0x14 /* Set RX sensor (std/learning) */
+#define MCE_CMD_G_RXSENSOR 0x15 /* Get RX sensor (std/learning) */
+#define MCE_RSP_PULSE_COUNT 0x15 /* RX pulse count (only if learning) */
+#define MCE_CMD_TX_PORTS 0x16 /* Get number of TX ports */
+#define MCE_CMD_G_WAKESRC 0x17 /* Get wake source */
+#define MCE_CMD_UNKNOWN7 0x18 /* Unknown */
+#define MCE_CMD_UNKNOWN8 0x19 /* Unknown */
+#define MCE_CMD_UNKNOWN9 0x1b /* Unknown */
+#define MCE_CMD_DEVICE_RESET 0xaa /* Reset the hardware */
+#define MCE_RSP_CMD_INVALID 0xfe /* Invalid command issued */
+
+
+/* module parameters */
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+/* general constants */
+#define SEND_FLAG_IN_PROGRESS 1
+#define SEND_FLAG_COMPLETE 2
+#define RECV_FLAG_IN_PROGRESS 3
+#define RECV_FLAG_COMPLETE 4
+
+#define MCEUSB_RX 1
+#define MCEUSB_TX 2
+
+#define VENDOR_PHILIPS 0x0471
+#define VENDOR_SMK 0x0609
+#define VENDOR_TATUNG 0x1460
+#define VENDOR_GATEWAY 0x107b
+#define VENDOR_SHUTTLE 0x1308
+#define VENDOR_SHUTTLE2 0x051c
+#define VENDOR_MITSUMI 0x03ee
+#define VENDOR_TOPSEED 0x1784
+#define VENDOR_RICAVISION 0x179d
+#define VENDOR_ITRON 0x195d
+#define VENDOR_FIC 0x1509
+#define VENDOR_LG 0x043e
+#define VENDOR_MICROSOFT 0x045e
+#define VENDOR_FORMOSA 0x147a
+#define VENDOR_FINTEK 0x1934
+#define VENDOR_PINNACLE 0x2304
+#define VENDOR_ECS 0x1019
+#define VENDOR_WISTRON 0x0fb8
+#define VENDOR_COMPRO 0x185b
+#define VENDOR_NORTHSTAR 0x04eb
+#define VENDOR_REALTEK 0x0bda
+#define VENDOR_TIVO 0x105a
+#define VENDOR_CONEXANT 0x0572
+
+enum mceusb_model_type {
+ MCE_GEN2 = 0, /* Most boards */
+ MCE_GEN1,
+ MCE_GEN3,
+ MCE_GEN2_TX_INV,
+ POLARIS_EVK,
+ CX_HYBRID_TV,
+};
+
+struct mceusb_model {
+ u32 mce_gen1:1;
+ u32 mce_gen2:1;
+ u32 mce_gen3:1;
+ u32 tx_mask_normal:1;
+ u32 is_polaris:1;
+ u32 no_tx:1;
+
+ const char *rc_map; /* Allow specify a per-board map */
+ const char *name; /* per-board name */
+};
+
+static const struct mceusb_model mceusb_model[] = {
+ [MCE_GEN1] = {
+ .mce_gen1 = 1,
+ .tx_mask_normal = 1,
+ },
+ [MCE_GEN2] = {
+ .mce_gen2 = 1,
+ },
+ [MCE_GEN2_TX_INV] = {
+ .mce_gen2 = 1,
+ .tx_mask_normal = 1,
+ },
+ [MCE_GEN3] = {
+ .mce_gen3 = 1,
+ .tx_mask_normal = 1,
+ },
+ [POLARIS_EVK] = {
+ .is_polaris = 1,
+ /*
+ * In fact, the EVK is shipped without
+ * remotes, but we should have something handy,
+ * to allow testing it
+ */
+ .rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
+ .name = "Conexant Hybrid TV (cx231xx) MCE IR",
+ },
+ [CX_HYBRID_TV] = {
+ .is_polaris = 1,
+ .no_tx = 1, /* tx isn't wired up at all */
+ .name = "Conexant Hybrid TV (cx231xx) MCE IR",
+ },
+};
+
+static struct usb_device_id mceusb_dev_table[] = {
+ /* Original Microsoft MCE IR Transceiver (often HP-branded) */
+ { USB_DEVICE(VENDOR_MICROSOFT, 0x006d),
+ .driver_info = MCE_GEN1 },
+ /* Philips Infrared Transceiver - Sahara branded */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x0608) },
+ /* Philips Infrared Transceiver - HP branded */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060c),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* Philips SRM5100 */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060d) },
+ /* Philips Infrared Transceiver - Omaura */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x060f) },
+ /* Philips Infrared Transceiver - Spinel plus */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x0613) },
+ /* Philips eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x0815) },
+ /* Philips/Spinel plus IR transceiver for ASUS */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x206c) },
+ /* Philips/Spinel plus IR transceiver for ASUS */
+ { USB_DEVICE(VENDOR_PHILIPS, 0x2088) },
+ /* Realtek MCE IR Receiver */
+ { USB_DEVICE(VENDOR_REALTEK, 0x0161) },
+ /* SMK/Toshiba G83C0004D410 */
+ { USB_DEVICE(VENDOR_SMK, 0x031d),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* SMK eHome Infrared Transceiver (Sony VAIO) */
+ { USB_DEVICE(VENDOR_SMK, 0x0322),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* bundled with Hauppauge PVR-150 */
+ { USB_DEVICE(VENDOR_SMK, 0x0334),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* SMK eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_SMK, 0x0338) },
+ /* Tatung eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TATUNG, 0x9150) },
+ /* Shuttle eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) },
+ /* Shuttle eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) },
+ /* Gateway eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_GATEWAY, 0x3009) },
+ /* Mitsumi */
+ { USB_DEVICE(VENDOR_MITSUMI, 0x2501) },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0001),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* Topseed HP eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0006),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0007),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0008),
+ .driver_info = MCE_GEN3 },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x000a),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* Topseed eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_TOPSEED, 0x0011),
+ .driver_info = MCE_GEN2_TX_INV },
+ /* Ricavision internal Infrared Transceiver */
+ { USB_DEVICE(VENDOR_RICAVISION, 0x0010) },
+ /* Itron ione Libra Q-11 */
+ { USB_DEVICE(VENDOR_ITRON, 0x7002) },
+ /* FIC eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FIC, 0x9242) },
+ /* LG eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_LG, 0x9803) },
+ /* Microsoft MCE Infrared Transceiver */
+ { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) },
+ /* Formosa eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe015) },
+ /* Formosa21 / eHome Infrared Receiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe016) },
+ /* Formosa aim / Trust MCE Infrared Receiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe017) },
+ /* Formosa Industrial Computing / Beanbag Emulation Device */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe018) },
+ /* Formosa21 / eHome Infrared Receiver */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe03a) },
+ /* Formosa Industrial Computing AIM IR605/A */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
+ /* Formosa Industrial Computing */
+ { USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
+ /* Fintek eHome Infrared Transceiver (HP branded) */
+ { USB_DEVICE(VENDOR_FINTEK, 0x5168) },
+ /* Fintek eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_FINTEK, 0x0602) },
+ /* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
+ { USB_DEVICE(VENDOR_FINTEK, 0x0702) },
+ /* Pinnacle Remote Kit */
+ { USB_DEVICE(VENDOR_PINNACLE, 0x0225),
+ .driver_info = MCE_GEN3 },
+ /* Elitegroup Computer Systems IR */
+ { USB_DEVICE(VENDOR_ECS, 0x0f38) },
+ /* Wistron Corp. eHome Infrared Receiver */
+ { USB_DEVICE(VENDOR_WISTRON, 0x0002) },
+ /* Compro K100 */
+ { USB_DEVICE(VENDOR_COMPRO, 0x3020) },
+ /* Compro K100 v2 */
+ { USB_DEVICE(VENDOR_COMPRO, 0x3082) },
+ /* Northstar Systems, Inc. eHome Infrared Transceiver */
+ { USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
+ /* TiVo PC IR Receiver */
+ { USB_DEVICE(VENDOR_TIVO, 0x2000) },
+ /* Conexant Hybrid TV "Shelby" Polaris SDK */
+ { USB_DEVICE(VENDOR_CONEXANT, 0x58a1),
+ .driver_info = POLARIS_EVK },
+ /* Conexant Hybrid TV RDU253S Polaris */
+ { USB_DEVICE(VENDOR_CONEXANT, 0x58a5),
+ .driver_info = CX_HYBRID_TV },
+ /* Terminating entry */
+ { }
+};
+
+/* data structure for each usb transceiver */
+struct mceusb_dev {
+ /* ir-core bits */
+ struct ir_dev_props *props;
+
+ /* optional features we can enable */
+ bool carrier_report_enabled;
+ bool learning_enabled;
+
+ /* core device bits */
+ struct device *dev;
+ struct input_dev *idev;
+
+ /* usb */
+ struct usb_device *usbdev;
+ struct urb *urb_in;
+ struct usb_endpoint_descriptor *usb_ep_in;
+ struct usb_endpoint_descriptor *usb_ep_out;
+
+ /* buffers and dma */
+ unsigned char *buf_in;
+ unsigned int len_in;
+ dma_addr_t dma_in;
+ dma_addr_t dma_out;
+
+ enum {
+ CMD_HEADER = 0,
+ SUBCMD,
+ CMD_DATA,
+ PARSE_IRDATA,
+ } parser_state;
+
+ u8 cmd, rem; /* Remaining IR data bytes in packet */
+
+ struct {
+ u32 connected:1;
+ u32 tx_mask_normal:1;
+ u32 microsoft_gen1:1;
+ u32 no_tx:1;
+ } flags;
+
+ /* transmit support */
+ int send_flags;
+ u32 carrier;
+ unsigned char tx_mask;
+
+ char name[128];
+ char phys[64];
+ enum mceusb_model_type model;
+};
+
+/*
+ * MCE Device Command Strings
+ * Device command responses vary from device to device...
+ * - DEVICE_RESET resets the hardware to its default state
+ * - GET_REVISION fetches the hardware/software revision, common
+ * replies are ff 0b 45 ff 1b 08 and ff 0b 50 ff 1b 42
+ * - GET_CARRIER_FREQ gets the carrier mode and frequency of the
+ * device, with replies in the form of 9f 06 MM FF, where MM is 0-3,
+ * meaning clk of 10000000, 2500000, 625000 or 156250, and FF is
+ * ((clk / frequency) - 1)
+ * - GET_RX_TIMEOUT fetches the receiver timeout in units of 50us,
+ * response in the form of 9f 0c msb lsb
+ * - GET_TX_BITMASK fetches the transmitter bitmask, replies in
+ * the form of 9f 08 bm, where bm is the bitmask
+ * - GET_RX_SENSOR fetches the RX sensor setting -- long-range
+ * general use one or short-range learning one, in the form of
+ * 9f 14 ss, where ss is either 01 for long-range or 02 for short
+ * - SET_CARRIER_FREQ sets a new carrier mode and frequency
+ * - SET_TX_BITMASK sets the transmitter bitmask
+ * - SET_RX_TIMEOUT sets the receiver timeout
+ * - SET_RX_SENSOR sets which receiver sensor to use
+ */
+static char DEVICE_RESET[] = {MCE_COMMAND_NULL, MCE_HW_CMD_HEADER,
+ MCE_CMD_DEVICE_RESET};
+static char GET_REVISION[] = {MCE_HW_CMD_HEADER, MCE_CMD_G_REVISION};
+static char GET_UNKNOWN[] = {MCE_HW_CMD_HEADER, MCE_CMD_UNKNOWN7};
+static char GET_UNKNOWN2[] = {MCE_COMMAND_HEADER, MCE_CMD_UNKNOWN2};
+static char GET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER, MCE_CMD_G_CARRIER};
+static char GET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TIMEOUT};
+static char GET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_G_TXMASK};
+static char GET_RX_SENSOR[] = {MCE_COMMAND_HEADER, MCE_CMD_G_RXSENSOR};
+/* sub in desired values in lower byte or bytes for full command */
+/* FIXME: make use of these for transmit.
+static char SET_CARRIER_FREQ[] = {MCE_COMMAND_HEADER,
+ MCE_CMD_S_CARRIER, 0x00, 0x00};
+static char SET_TX_BITMASK[] = {MCE_COMMAND_HEADER, MCE_CMD_S_TXMASK, 0x00};
+static char SET_RX_TIMEOUT[] = {MCE_COMMAND_HEADER,
+ MCE_CMD_S_TIMEOUT, 0x00, 0x00};
+static char SET_RX_SENSOR[] = {MCE_COMMAND_HEADER,
+ MCE_CMD_S_RXSENSOR, 0x00};
+*/
+
+static int mceusb_cmdsize(u8 cmd, u8 subcmd)
+{
+ int datasize = 0;
+
+ switch (cmd) {
+ case MCE_COMMAND_NULL:
+ if (subcmd == MCE_HW_CMD_HEADER)
+ datasize = 1;
+ break;
+ case MCE_HW_CMD_HEADER:
+ switch (subcmd) {
+ case MCE_CMD_G_REVISION:
+ datasize = 2;
+ break;
+ }
+ case MCE_COMMAND_HEADER:
+ switch (subcmd) {
+ case MCE_CMD_UNKNOWN:
+ case MCE_CMD_S_CARRIER:
+ case MCE_CMD_S_TIMEOUT:
+ case MCE_RSP_PULSE_COUNT:
+ datasize = 2;
+ break;
+ case MCE_CMD_SIG_END:
+ case MCE_CMD_S_TXMASK:
+ case MCE_CMD_S_RXSENSOR:
+ datasize = 1;
+ break;
+ }
+ }
+ return datasize;
+}
+
+static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
+ int offset, int len, bool out)
+{
+ char codes[USB_BUFLEN * 3 + 1];
+ char inout[9];
+ u8 cmd, subcmd, data1, data2;
+ struct device *dev = ir->dev;
+ int i, start, skip = 0;
+
+ if (!debug)
+ return;
+
+ /* skip meaningless 0xb1 0x60 header bytes on orig receiver */
+ if (ir->flags.microsoft_gen1 && !out && !offset)
+ skip = 2;
+
+ if (len <= skip)
+ return;
+
+ for (i = 0; i < len && i < USB_BUFLEN; i++)
+ snprintf(codes + i * 3, 4, "%02x ", buf[i + offset] & 0xff);
+
+ dev_info(dev, "%sx data: %s(length=%d)\n",
+ (out ? "t" : "r"), codes, len);
+
+ if (out)
+ strcpy(inout, "Request\0");
+ else
+ strcpy(inout, "Got\0");
+
+ start = offset + skip;
+ cmd = buf[start] & 0xff;
+ subcmd = buf[start + 1] & 0xff;
+ data1 = buf[start + 2] & 0xff;
+ data2 = buf[start + 3] & 0xff;
+
+ switch (cmd) {
+ case MCE_COMMAND_NULL:
+ if ((subcmd == MCE_HW_CMD_HEADER) &&
+ (data1 == MCE_CMD_DEVICE_RESET))
+ dev_info(dev, "Device reset requested\n");
+ else
+ dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+ cmd, subcmd);
+ break;
+ case MCE_HW_CMD_HEADER:
+ switch (subcmd) {
+ case MCE_CMD_G_REVISION:
+ if (len == 2)
+ dev_info(dev, "Get hw/sw rev?\n");
+ else
+ dev_info(dev, "hw/sw rev 0x%02x 0x%02x "
+ "0x%02x 0x%02x\n", data1, data2,
+ buf[start + 4], buf[start + 5]);
+ break;
+ case MCE_CMD_DEVICE_RESET:
+ dev_info(dev, "Device reset requested\n");
+ break;
+ case MCE_RSP_CMD_INVALID:
+ dev_info(dev, "Previous command not supported\n");
+ break;
+ case MCE_CMD_UNKNOWN7:
+ case MCE_CMD_UNKNOWN9:
+ default:
+ dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+ cmd, subcmd);
+ break;
+ }
+ break;
+ case MCE_COMMAND_HEADER:
+ switch (subcmd) {
+ case MCE_CMD_SIG_END:
+ dev_info(dev, "End of signal\n");
+ break;
+ case MCE_CMD_PING:
+ dev_info(dev, "Ping\n");
+ break;
+ case MCE_CMD_UNKNOWN:
+ dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n",
+ data1, data2);
+ break;
+ case MCE_CMD_S_CARRIER:
+ dev_info(dev, "%s carrier mode and freq of "
+ "0x%02x 0x%02x\n", inout, data1, data2);
+ break;
+ case MCE_CMD_G_CARRIER:
+ dev_info(dev, "Get carrier mode and freq\n");
+ break;
+ case MCE_CMD_S_TXMASK:
+ dev_info(dev, "%s transmit blaster mask of 0x%02x\n",
+ inout, data1);
+ break;
+ case MCE_CMD_S_TIMEOUT:
+ /* value is in units of 50us, so x*50/100 or x/2 ms */
+ dev_info(dev, "%s receive timeout of %d ms\n",
+ inout, ((data1 << 8) | data2) / 2);
+ break;
+ case MCE_CMD_G_TIMEOUT:
+ dev_info(dev, "Get receive timeout\n");
+ break;
+ case MCE_CMD_G_TXMASK:
+ dev_info(dev, "Get transmit blaster mask\n");
+ break;
+ case MCE_CMD_S_RXSENSOR:
+ dev_info(dev, "%s %s-range receive sensor in use\n",
+ inout, data1 == 0x02 ? "short" : "long");
+ break;
+ case MCE_CMD_G_RXSENSOR:
+ /* aka MCE_RSP_PULSE_COUNT */
+ if (out)
+ dev_info(dev, "Get receive sensor\n");
+ else if (ir->learning_enabled)
+ dev_info(dev, "RX pulse count: %d\n",
+ ((data1 << 8) | data2));
+ break;
+ case MCE_RSP_CMD_INVALID:
+ dev_info(dev, "Error! Hardware is likely wedged...\n");
+ break;
+ case MCE_CMD_UNKNOWN2:
+ case MCE_CMD_UNKNOWN3:
+ case MCE_CMD_UNKNOWN5:
+ default:
+ dev_info(dev, "Unknown command 0x%02x 0x%02x\n",
+ cmd, subcmd);
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (cmd == MCE_IRDATA_TRAILER)
+ dev_info(dev, "End of raw IR data\n");
+ else if ((cmd != MCE_COMMAND_HEADER) &&
+ ((cmd & MCE_COMMAND_MASK) == MCE_COMMAND_IRDATA))
+ dev_info(dev, "Raw IR data, %d pulse/space samples\n", ir->rem);
+}
+
+static void mce_async_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct mceusb_dev *ir;
+ int len;
+
+ if (!urb)
+ return;
+
+ ir = urb->context;
+ if (ir) {
+ len = urb->actual_length;
+
+ dev_dbg(ir->dev, "callback called (status=%d len=%d)\n",
+ urb->status, len);
+
+ mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true);
+ }
+
+}
+
+/* request incoming or send outgoing usb packet - used to initialize remote */
+static void mce_request_packet(struct mceusb_dev *ir,
+ struct usb_endpoint_descriptor *ep,
+ unsigned char *data, int size, int urb_type)
+{
+ int res;
+ struct urb *async_urb;
+ struct device *dev = ir->dev;
+ unsigned char *async_buf;
+
+ if (urb_type == MCEUSB_TX) {
+ async_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (unlikely(!async_urb)) {
+ dev_err(dev, "Error, couldn't allocate urb!\n");
+ return;
+ }
+
+ async_buf = kzalloc(size, GFP_KERNEL);
+ if (!async_buf) {
+ dev_err(dev, "Error, couldn't allocate buf!\n");
+ usb_free_urb(async_urb);
+ return;
+ }
+
+ /* outbound data */
+ usb_fill_int_urb(async_urb, ir->usbdev,
+ usb_sndintpipe(ir->usbdev, ep->bEndpointAddress),
+ async_buf, size, (usb_complete_t)mce_async_callback,
+ ir, ep->bInterval);
+ memcpy(async_buf, data, size);
+
+ } else if (urb_type == MCEUSB_RX) {
+ /* standard request */
+ async_urb = ir->urb_in;
+ ir->send_flags = RECV_FLAG_IN_PROGRESS;
+
+ } else {
+ dev_err(dev, "Error! Unknown urb type %d\n", urb_type);
+ return;
+ }
+
+ dev_dbg(dev, "receive request called (size=%#x)\n", size);
+
+ async_urb->transfer_buffer_length = size;
+ async_urb->dev = ir->usbdev;
+
+ res = usb_submit_urb(async_urb, GFP_ATOMIC);
+ if (res) {
+ dev_dbg(dev, "receive request FAILED! (res=%d)\n", res);
+ return;
+ }
+ dev_dbg(dev, "receive request complete (res=%d)\n", res);
+}
+
+static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size)
+{
+ mce_request_packet(ir, ir->usb_ep_out, data, size, MCEUSB_TX);
+}
+
+static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
+{
+ mce_request_packet(ir, ir->usb_ep_in, data, size, MCEUSB_RX);
+}
+
+/* Send data out the IR blaster port(s) */
+static int mceusb_tx_ir(void *priv, int *txbuf, u32 n)
+{
+ struct mceusb_dev *ir = priv;
+ int i, ret = 0;
+ int count, cmdcount = 0;
+ unsigned char *cmdbuf; /* MCE command buffer */
+ long signal_duration = 0; /* Singnal length in us */
+ struct timeval start_time, end_time;
+
+ do_gettimeofday(&start_time);
+
+ count = n / sizeof(int);
+
+ cmdbuf = kzalloc(sizeof(int) * MCE_CMDBUF_SIZE, GFP_KERNEL);
+ if (!cmdbuf)
+ return -ENOMEM;
+
+ /* MCE tx init header */
+ cmdbuf[cmdcount++] = MCE_COMMAND_HEADER;
+ cmdbuf[cmdcount++] = MCE_CMD_S_TXMASK;
+ cmdbuf[cmdcount++] = ir->tx_mask;
+
+ /* Generate mce packet data */
+ for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) {
+ signal_duration += txbuf[i];
+ txbuf[i] = txbuf[i] / MCE_TIME_UNIT;
+
+ do { /* loop to support long pulses/spaces > 127*50us=6.35ms */
+
+ /* Insert mce packet header every 4th entry */
+ if ((cmdcount < MCE_CMDBUF_SIZE) &&
+ (cmdcount - MCE_TX_HEADER_LENGTH) %
+ MCE_CODE_LENGTH == 0)
+ cmdbuf[cmdcount++] = MCE_IRDATA_HEADER;
+
+ /* Insert mce packet data */
+ if (cmdcount < MCE_CMDBUF_SIZE)
+ cmdbuf[cmdcount++] =
+ (txbuf[i] < MCE_PULSE_BIT ?
+ txbuf[i] : MCE_MAX_PULSE_LENGTH) |
+ (i & 1 ? 0x00 : MCE_PULSE_BIT);
+ else {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ } while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) &&
+ (txbuf[i] -= MCE_MAX_PULSE_LENGTH));
+ }
+
+ /* Fix packet length in last header */
+ cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] =
+ MCE_COMMAND_IRDATA + (cmdcount - MCE_TX_HEADER_LENGTH) %
+ MCE_CODE_LENGTH - 1;
+
+ /* Check if we have room for the empty packet at the end */
+ if (cmdcount >= MCE_CMDBUF_SIZE) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* All mce commands end with an empty packet (0x80) */
+ cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER;
+
+ /* Transmit the command to the mce device */
+ mce_async_out(ir, cmdbuf, cmdcount);
+
+ /*
+ * The lircd gap calculation expects the write function to
+ * wait the time it takes for the ircommand to be sent before
+ * it returns.
+ */
+ do_gettimeofday(&end_time);
+ signal_duration -= (end_time.tv_usec - start_time.tv_usec) +
+ (end_time.tv_sec - start_time.tv_sec) * 1000000;
+
+ /* delay with the closest number of ticks */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(usecs_to_jiffies(signal_duration));
+
+out:
+ kfree(cmdbuf);
+ return ret ? ret : n;
+}
+
+/* Sets active IR outputs -- mce devices typically have two */
+static int mceusb_set_tx_mask(void *priv, u32 mask)
+{
+ struct mceusb_dev *ir = priv;
+
+ if (ir->flags.tx_mask_normal)
+ ir->tx_mask = mask;
+ else
+ ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
+ mask ^ MCE_DEFAULT_TX_MASK : mask) << 1;
+
+ return 0;
+}
+
+/* Sets the send carrier frequency and mode */
+static int mceusb_set_tx_carrier(void *priv, u32 carrier)
+{
+ struct mceusb_dev *ir = priv;
+ int clk = 10000000;
+ int prescaler = 0, divisor = 0;
+ unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
+ MCE_CMD_S_CARRIER, 0x00, 0x00 };
+
+ /* Carrier has changed */
+ if (ir->carrier != carrier) {
+
+ if (carrier == 0) {
+ ir->carrier = carrier;
+ cmdbuf[2] = MCE_CMD_SIG_END;
+ cmdbuf[3] = MCE_IRDATA_TRAILER;
+ dev_dbg(ir->dev, "%s: disabling carrier "
+ "modulation\n", __func__);
+ mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+ return carrier;
+ }
+
+ for (prescaler = 0; prescaler < 4; ++prescaler) {
+ divisor = (clk >> (2 * prescaler)) / carrier;
+ if (divisor <= 0xff) {
+ ir->carrier = carrier;
+ cmdbuf[2] = prescaler;
+ cmdbuf[3] = divisor;
+ dev_dbg(ir->dev, "%s: requesting %u HZ "
+ "carrier\n", __func__, carrier);
+
+ /* Transmit new carrier to mce device */
+ mce_async_out(ir, cmdbuf, sizeof(cmdbuf));
+ return carrier;
+ }
+ }
+
+ return -EINVAL;
+
+ }
+
+ return carrier;
+}
+
+/*
+ * We don't do anything but print debug spew for many of the command bits
+ * we receive from the hardware, but some of them are useful information
+ * we want to store so that we can use them.
+ */
+static void mceusb_handle_command(struct mceusb_dev *ir, int index)
+{
+ u8 hi = ir->buf_in[index + 1] & 0xff;
+ u8 lo = ir->buf_in[index + 2] & 0xff;
+
+ switch (ir->buf_in[index]) {
+ /* 2-byte return value commands */
+ case MCE_CMD_S_TIMEOUT:
+ ir->props->timeout = MS_TO_NS((hi << 8 | lo) / 2);
+ break;
+
+ /* 1-byte return value commands */
+ case MCE_CMD_S_TXMASK:
+ ir->tx_mask = hi;
+ break;
+ case MCE_CMD_S_RXSENSOR:
+ ir->learning_enabled = (hi == 0x02);
+ break;
+ default:
+ break;
+ }
+}
+
+static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
+{
+ DEFINE_IR_RAW_EVENT(rawir);
+ int i = 0;
+
+ /* skip meaningless 0xb1 0x60 header bytes on orig receiver */
+ if (ir->flags.microsoft_gen1)
+ i = 2;
+
+ /* if there's no data, just return now */
+ if (buf_len <= i)
+ return;
+
+ for (; i < buf_len; i++) {
+ switch (ir->parser_state) {
+ case SUBCMD:
+ ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]);
+ mceusb_dev_printdata(ir, ir->buf_in, i - 1,
+ ir->rem + 2, false);
+ mceusb_handle_command(ir, i);
+ ir->parser_state = CMD_DATA;
+ break;
+ case PARSE_IRDATA:
+ ir->rem--;
+ rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
+ rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
+ * MS_TO_NS(MCE_TIME_UNIT);
+
+ dev_dbg(ir->dev, "Storing %s with duration %d\n",
+ rawir.pulse ? "pulse" : "space",
+ rawir.duration);
+
+ ir_raw_event_store_with_filter(ir->idev, &rawir);
+ break;
+ case CMD_DATA:
+ ir->rem--;
+ break;
+ case CMD_HEADER:
+ /* decode mce packets of the form (84),AA,BB,CC,DD */
+ /* IR data packets can span USB messages - rem */
+ ir->cmd = ir->buf_in[i];
+ if ((ir->cmd == MCE_COMMAND_HEADER) ||
+ ((ir->cmd & MCE_COMMAND_MASK) !=
+ MCE_COMMAND_IRDATA)) {
+ ir->parser_state = SUBCMD;
+ continue;
+ }
+ ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
+ mceusb_dev_printdata(ir, ir->buf_in,
+ i, ir->rem + 1, false);
+ if (ir->rem)
+ ir->parser_state = PARSE_IRDATA;
+ break;
+ }
+
+ if (ir->parser_state != CMD_HEADER && !ir->rem)
+ ir->parser_state = CMD_HEADER;
+ }
+ dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
+ ir_raw_event_handle(ir->idev);
+}
+
+static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
+{
+ struct mceusb_dev *ir;
+ int buf_len;
+
+ if (!urb)
+ return;
+
+ ir = urb->context;
+ if (!ir) {
+ usb_unlink_urb(urb);
+ return;
+ }
+
+ buf_len = urb->actual_length;
+
+ if (ir->send_flags == RECV_FLAG_IN_PROGRESS) {
+ ir->send_flags = SEND_FLAG_COMPLETE;
+ dev_dbg(ir->dev, "setup answer received %d bytes\n",
+ buf_len);
+ }
+
+ switch (urb->status) {
+ /* success */
+ case 0:
+ mceusb_process_ir_data(ir, buf_len);
+ break;
+
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ usb_unlink_urb(urb);
+ return;
+
+ case -EPIPE:
+ default:
+ dev_dbg(ir->dev, "Error: urb status = %d\n", urb->status);
+ break;
+ }
+
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static void mceusb_gen1_init(struct mceusb_dev *ir)
+{
+ int ret;
+ int maxp = ir->len_in;
+ struct device *dev = ir->dev;
+ char *data;
+
+ data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL);
+ if (!data) {
+ dev_err(dev, "%s: memory allocation failed!\n", __func__);
+ return;
+ }
+
+ /*
+ * This is a strange one. Windows issues a set address to the device
+ * on the receive control pipe and expect a certain value pair back
+ */
+ ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0),
+ USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0,
+ data, USB_CTRL_MSG_SZ, HZ * 3);
+ dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+ dev_dbg(dev, "%s - data[0] = %d, data[1] = %d\n",
+ __func__, data[0], data[1]);
+
+ /* set feature: bit rate 38400 bps */
+ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+ USB_REQ_SET_FEATURE, USB_TYPE_VENDOR,
+ 0xc04e, 0x0000, NULL, 0, HZ * 3);
+
+ dev_dbg(dev, "%s - ret = %d\n", __func__, ret);
+
+ /* bRequest 4: set char length to 8 bits */
+ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+ 4, USB_TYPE_VENDOR,
+ 0x0808, 0x0000, NULL, 0, HZ * 3);
+ dev_dbg(dev, "%s - retB = %d\n", __func__, ret);
+
+ /* bRequest 2: set handshaking to use DTR/DSR */
+ ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
+ 2, USB_TYPE_VENDOR,
+ 0x0000, 0x0100, NULL, 0, HZ * 3);
+ dev_dbg(dev, "%s - retC = %d\n", __func__, ret);
+
+ /* device reset */
+ mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
+ mce_sync_in(ir, NULL, maxp);
+
+ /* get hw/sw revision? */
+ mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
+ mce_sync_in(ir, NULL, maxp);
+
+ kfree(data);
+};
+
+static void mceusb_gen2_init(struct mceusb_dev *ir)
+{
+ int maxp = ir->len_in;
+
+ /* device reset */
+ mce_async_out(ir, DEVICE_RESET, sizeof(DEVICE_RESET));
+ mce_sync_in(ir, NULL, maxp);
+
+ /* get hw/sw revision? */
+ mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION));
+ mce_sync_in(ir, NULL, maxp);
+
+ /* unknown what the next two actually return... */
+ mce_async_out(ir, GET_UNKNOWN, sizeof(GET_UNKNOWN));
+ mce_sync_in(ir, NULL, maxp);
+ mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2));
+ mce_sync_in(ir, NULL, maxp);
+}
+
+static void mceusb_get_parameters(struct mceusb_dev *ir)
+{
+ int maxp = ir->len_in;
+
+ /* get the carrier and frequency */
+ mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
+ mce_sync_in(ir, NULL, maxp);
+
+ if (!ir->flags.no_tx) {
+ /* get the transmitter bitmask */
+ mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
+ mce_sync_in(ir, NULL, maxp);
+ }
+
+ /* get receiver timeout value */
+ mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
+ mce_sync_in(ir, NULL, maxp);
+
+ /* get receiver sensor setting */
+ mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR));
+ mce_sync_in(ir, NULL, maxp);
+}
+
+static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
+{
+ struct input_dev *idev;
+ struct ir_dev_props *props;
+ struct device *dev = ir->dev;
+ const char *rc_map = RC_MAP_RC6_MCE;
+ const char *name = "Media Center Ed. eHome Infrared Remote Transceiver";
+ int ret = -ENODEV;
+
+ idev = input_allocate_device();
+ if (!idev) {
+ dev_err(dev, "remote input dev allocation failed\n");
+ goto idev_alloc_failed;
+ }
+
+ ret = -ENOMEM;
+ props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+ if (!props) {
+ dev_err(dev, "remote ir dev props allocation failed\n");
+ goto props_alloc_failed;
+ }
+
+ if (mceusb_model[ir->model].name)
+ name = mceusb_model[ir->model].name;
+
+ snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
+ name,
+ le16_to_cpu(ir->usbdev->descriptor.idVendor),
+ le16_to_cpu(ir->usbdev->descriptor.idProduct));
+
+ idev->name = ir->name;
+ usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
+ strlcat(ir->phys, "/input0", sizeof(ir->phys));
+ idev->phys = ir->phys;
+
+ props->priv = ir;
+ props->driver_type = RC_DRIVER_IR_RAW;
+ props->allowed_protos = IR_TYPE_ALL;
+ props->timeout = MS_TO_NS(1000);
+ if (!ir->flags.no_tx) {
+ props->s_tx_mask = mceusb_set_tx_mask;
+ props->s_tx_carrier = mceusb_set_tx_carrier;
+ props->tx_ir = mceusb_tx_ir;
+ }
+
+ ir->props = props;
+
+ usb_to_input_id(ir->usbdev, &idev->id);
+ idev->dev.parent = ir->dev;
+
+ if (mceusb_model[ir->model].rc_map)
+ rc_map = mceusb_model[ir->model].rc_map;
+
+ ret = ir_input_register(idev, rc_map, props, DRIVER_NAME);
+ if (ret < 0) {
+ dev_err(dev, "remote input device register failed\n");
+ goto irdev_failed;
+ }
+
+ return idev;
+
+irdev_failed:
+ kfree(props);
+props_alloc_failed:
+ input_free_device(idev);
+idev_alloc_failed:
+ return NULL;
+}
+
+static int __devinit mceusb_dev_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *idesc;
+ struct usb_endpoint_descriptor *ep = NULL;
+ struct usb_endpoint_descriptor *ep_in = NULL;
+ struct usb_endpoint_descriptor *ep_out = NULL;
+ struct mceusb_dev *ir = NULL;
+ int pipe, maxp, i;
+ char buf[63], name[128] = "";
+ enum mceusb_model_type model = id->driver_info;
+ bool is_gen3;
+ bool is_microsoft_gen1;
+ bool tx_mask_normal;
+ bool is_polaris;
+
+ dev_dbg(&intf->dev, "%s called\n", __func__);
+
+ idesc = intf->cur_altsetting;
+
+ is_gen3 = mceusb_model[model].mce_gen3;
+ is_microsoft_gen1 = mceusb_model[model].mce_gen1;
+ tx_mask_normal = mceusb_model[model].tx_mask_normal;
+ is_polaris = mceusb_model[model].is_polaris;
+
+ if (is_polaris) {
+ /* Interface 0 is IR */
+ if (idesc->desc.bInterfaceNumber)
+ return -ENODEV;
+ }
+
+ /* step through the endpoints to find first bulk in and out endpoint */
+ for (i = 0; i < idesc->desc.bNumEndpoints; ++i) {
+ ep = &idesc->endpoint[i].desc;
+
+ if ((ep_in == NULL)
+ && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN)
+ && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_BULK)
+ || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT))) {
+
+ ep_in = ep;
+ ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
+ ep_in->bInterval = 1;
+ dev_dbg(&intf->dev, "acceptable inbound endpoint "
+ "found\n");
+ }
+
+ if ((ep_out == NULL)
+ && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_OUT)
+ && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_BULK)
+ || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT))) {
+
+ ep_out = ep;
+ ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
+ ep_out->bInterval = 1;
+ dev_dbg(&intf->dev, "acceptable outbound endpoint "
+ "found\n");
+ }
+ }
+ if (ep_in == NULL) {
+ dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
+ return -ENODEV;
+ }
+
+ pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress);
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL);
+ if (!ir)
+ goto mem_alloc_fail;
+
+ ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in);
+ if (!ir->buf_in)
+ goto buf_in_alloc_fail;
+
+ ir->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ir->urb_in)
+ goto urb_in_alloc_fail;
+
+ ir->usbdev = dev;
+ ir->dev = &intf->dev;
+ ir->len_in = maxp;
+ ir->flags.microsoft_gen1 = is_microsoft_gen1;
+ ir->flags.tx_mask_normal = tx_mask_normal;
+ ir->flags.no_tx = mceusb_model[model].no_tx;
+ ir->model = model;
+
+ /* Saving usb interface data for use by the transmitter routine */
+ ir->usb_ep_in = ep_in;
+ ir->usb_ep_out = ep_out;
+
+ if (dev->descriptor.iManufacturer
+ && usb_string(dev, dev->descriptor.iManufacturer,
+ buf, sizeof(buf)) > 0)
+ strlcpy(name, buf, sizeof(name));
+ if (dev->descriptor.iProduct
+ && usb_string(dev, dev->descriptor.iProduct,
+ buf, sizeof(buf)) > 0)
+ snprintf(name + strlen(name), sizeof(name) - strlen(name),
+ " %s", buf);
+
+ ir->idev = mceusb_init_input_dev(ir);
+ if (!ir->idev)
+ goto input_dev_fail;
+
+ /* flush buffers on the device */
+ mce_sync_in(ir, NULL, maxp);
+ mce_sync_in(ir, NULL, maxp);
+
+ /* wire up inbound data handler */
+ usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in,
+ maxp, (usb_complete_t) mceusb_dev_recv, ir, ep_in->bInterval);
+ ir->urb_in->transfer_dma = ir->dma_in;
+ ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* initialize device */
+ if (ir->flags.microsoft_gen1)
+ mceusb_gen1_init(ir);
+ else if (!is_gen3)
+ mceusb_gen2_init(ir);
+
+ mceusb_get_parameters(ir);
+
+ if (!ir->flags.no_tx)
+ mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
+
+ usb_set_intfdata(intf, ir);
+
+ dev_info(&intf->dev, "Registered %s on usb%d:%d\n", name,
+ dev->bus->busnum, dev->devnum);
+
+ return 0;
+
+ /* Error-handling path */
+input_dev_fail:
+ usb_free_urb(ir->urb_in);
+urb_in_alloc_fail:
+ usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
+buf_in_alloc_fail:
+ kfree(ir);
+mem_alloc_fail:
+ dev_err(&intf->dev, "%s: device setup failed!\n", __func__);
+
+ return -ENOMEM;
+}
+
+
+static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct mceusb_dev *ir = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ if (!ir)
+ return;
+
+ ir->usbdev = NULL;
+ ir_input_unregister(ir->idev);
+ usb_kill_urb(ir->urb_in);
+ usb_free_urb(ir->urb_in);
+ usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
+
+ kfree(ir);
+}
+
+static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct mceusb_dev *ir = usb_get_intfdata(intf);
+ dev_info(ir->dev, "suspend\n");
+ usb_kill_urb(ir->urb_in);
+ return 0;
+}
+
+static int mceusb_dev_resume(struct usb_interface *intf)
+{
+ struct mceusb_dev *ir = usb_get_intfdata(intf);
+ dev_info(ir->dev, "resume\n");
+ if (usb_submit_urb(ir->urb_in, GFP_ATOMIC))
+ return -EIO;
+ return 0;
+}
+
+static struct usb_driver mceusb_dev_driver = {
+ .name = DRIVER_NAME,
+ .probe = mceusb_dev_probe,
+ .disconnect = mceusb_dev_disconnect,
+ .suspend = mceusb_dev_suspend,
+ .resume = mceusb_dev_resume,
+ .reset_resume = mceusb_dev_resume,
+ .id_table = mceusb_dev_table
+};
+
+static int __init mceusb_dev_init(void)
+{
+ int ret;
+
+ ret = usb_register(&mceusb_dev_driver);
+ if (ret < 0)
+ printk(KERN_ERR DRIVER_NAME
+ ": usb register failed, result = %d\n", ret);
+
+ return ret;
+}
+
+static void __exit mceusb_dev_exit(void)
+{
+ usb_deregister(&mceusb_dev_driver);
+}
+
+module_init(mceusb_dev_init);
+module_exit(mceusb_dev_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(usb, mceusb_dev_table);
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
--- /dev/null
+/*
+ * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
+ *
+ * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
+ * Copyright (C) 2009 Nuvoton PS Team
+ *
+ * Special thanks to Nuvoton for providing hardware, spec sheets and
+ * sample code upon which portions of this driver are based. Indirect
+ * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
+ * modeled after.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <media/ir-core.h>
+#include <linux/pci_ids.h>
+
+#include "nuvoton-cir.h"
+
+static char *chip_id = "w836x7hg";
+
+/* write val to config reg */
+static inline void nvt_cr_write(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+ outb(reg, nvt->cr_efir);
+ outb(val, nvt->cr_efdr);
+}
+
+/* read val from config reg */
+static inline u8 nvt_cr_read(struct nvt_dev *nvt, u8 reg)
+{
+ outb(reg, nvt->cr_efir);
+ return inb(nvt->cr_efdr);
+}
+
+/* update config register bit without changing other bits */
+static inline void nvt_set_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+ u8 tmp = nvt_cr_read(nvt, reg) | val;
+ nvt_cr_write(nvt, tmp, reg);
+}
+
+/* clear config register bit without changing other bits */
+static inline void nvt_clear_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg)
+{
+ u8 tmp = nvt_cr_read(nvt, reg) & ~val;
+ nvt_cr_write(nvt, tmp, reg);
+}
+
+/* enter extended function mode */
+static inline void nvt_efm_enable(struct nvt_dev *nvt)
+{
+ /* Enabling Extended Function Mode explicitly requires writing 2x */
+ outb(EFER_EFM_ENABLE, nvt->cr_efir);
+ outb(EFER_EFM_ENABLE, nvt->cr_efir);
+}
+
+/* exit extended function mode */
+static inline void nvt_efm_disable(struct nvt_dev *nvt)
+{
+ outb(EFER_EFM_DISABLE, nvt->cr_efir);
+}
+
+/*
+ * When you want to address a specific logical device, write its logical
+ * device number to CR_LOGICAL_DEV_SEL, then enable/disable by writing
+ * 0x1/0x0 respectively to CR_LOGICAL_DEV_EN.
+ */
+static inline void nvt_select_logical_dev(struct nvt_dev *nvt, u8 ldev)
+{
+ outb(CR_LOGICAL_DEV_SEL, nvt->cr_efir);
+ outb(ldev, nvt->cr_efdr);
+}
+
+/* write val to cir config register */
+static inline void nvt_cir_reg_write(struct nvt_dev *nvt, u8 val, u8 offset)
+{
+ outb(val, nvt->cir_addr + offset);
+}
+
+/* read val from cir config register */
+static u8 nvt_cir_reg_read(struct nvt_dev *nvt, u8 offset)
+{
+ u8 val;
+
+ val = inb(nvt->cir_addr + offset);
+
+ return val;
+}
+
+/* write val to cir wake register */
+static inline void nvt_cir_wake_reg_write(struct nvt_dev *nvt,
+ u8 val, u8 offset)
+{
+ outb(val, nvt->cir_wake_addr + offset);
+}
+
+/* read val from cir wake config register */
+static u8 nvt_cir_wake_reg_read(struct nvt_dev *nvt, u8 offset)
+{
+ u8 val;
+
+ val = inb(nvt->cir_wake_addr + offset);
+
+ return val;
+}
+
+#define pr_reg(text, ...) \
+ printk(KERN_INFO KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+/* dump current cir register contents */
+static void cir_dump_regs(struct nvt_dev *nvt)
+{
+ nvt_efm_enable(nvt);
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+
+ pr_reg("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME);
+ pr_reg(" * CR CIR ACTIVE : 0x%x\n",
+ nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
+ pr_reg(" * CR CIR BASE ADDR: 0x%x\n",
+ (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
+ nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
+ pr_reg(" * CR CIR IRQ NUM: 0x%x\n",
+ nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
+
+ nvt_efm_disable(nvt);
+
+ pr_reg("%s: Dump CIR registers:\n", NVT_DRIVER_NAME);
+ pr_reg(" * IRCON: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRCON));
+ pr_reg(" * IRSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRSTS));
+ pr_reg(" * IREN: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IREN));
+ pr_reg(" * RXFCONT: 0x%x\n", nvt_cir_reg_read(nvt, CIR_RXFCONT));
+ pr_reg(" * CP: 0x%x\n", nvt_cir_reg_read(nvt, CIR_CP));
+ pr_reg(" * CC: 0x%x\n", nvt_cir_reg_read(nvt, CIR_CC));
+ pr_reg(" * SLCH: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCH));
+ pr_reg(" * SLCL: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCL));
+ pr_reg(" * FIFOCON: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FIFOCON));
+ pr_reg(" * IRFIFOSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFIFOSTS));
+ pr_reg(" * SRXFIFO: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SRXFIFO));
+ pr_reg(" * TXFCONT: 0x%x\n", nvt_cir_reg_read(nvt, CIR_TXFCONT));
+ pr_reg(" * STXFIFO: 0x%x\n", nvt_cir_reg_read(nvt, CIR_STXFIFO));
+ pr_reg(" * FCCH: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCH));
+ pr_reg(" * FCCL: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCL));
+ pr_reg(" * IRFSM: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFSM));
+}
+
+/* dump current cir wake register contents */
+static void cir_wake_dump_regs(struct nvt_dev *nvt)
+{
+ u8 i, fifo_len;
+
+ nvt_efm_enable(nvt);
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+
+ pr_reg("%s: Dump CIR WAKE logical device registers:\n",
+ NVT_DRIVER_NAME);
+ pr_reg(" * CR CIR WAKE ACTIVE : 0x%x\n",
+ nvt_cr_read(nvt, CR_LOGICAL_DEV_EN));
+ pr_reg(" * CR CIR WAKE BASE ADDR: 0x%x\n",
+ (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) |
+ nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO));
+ pr_reg(" * CR CIR WAKE IRQ NUM: 0x%x\n",
+ nvt_cr_read(nvt, CR_CIR_IRQ_RSRC));
+
+ nvt_efm_disable(nvt);
+
+ pr_reg("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME);
+ pr_reg(" * IRCON: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON));
+ pr_reg(" * IRSTS: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS));
+ pr_reg(" * IREN: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN));
+ pr_reg(" * FIFO CMP DEEP: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_DEEP));
+ pr_reg(" * FIFO CMP TOL: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_TOL));
+ pr_reg(" * FIFO COUNT: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT));
+ pr_reg(" * SLCH: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCH));
+ pr_reg(" * SLCL: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCL));
+ pr_reg(" * FIFOCON: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON));
+ pr_reg(" * SRXFSTS: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_SRXFSTS));
+ pr_reg(" * SAMPLE RX FIFO: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_SAMPLE_RX_FIFO));
+ pr_reg(" * WR FIFO DATA: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_WR_FIFO_DATA));
+ pr_reg(" * RD FIFO ONLY: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
+ pr_reg(" * RD FIFO ONLY IDX: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX));
+ pr_reg(" * FIFO IGNORE: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_IGNORE));
+ pr_reg(" * IRFSM: 0x%x\n",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRFSM));
+
+ fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT);
+ pr_reg("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME, fifo_len);
+ pr_reg("* Contents = ");
+ for (i = 0; i < fifo_len; i++)
+ printk(KERN_CONT "%02x ",
+ nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY));
+ printk(KERN_CONT "\n");
+}
+
+/* detect hardware features */
+static int nvt_hw_detect(struct nvt_dev *nvt)
+{
+ unsigned long flags;
+ u8 chip_major, chip_minor;
+ int ret = 0;
+
+ nvt_efm_enable(nvt);
+
+ /* Check if we're wired for the alternate EFER setup */
+ chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
+ if (chip_major == 0xff) {
+ nvt->cr_efir = CR_EFIR2;
+ nvt->cr_efdr = CR_EFDR2;
+ nvt_efm_enable(nvt);
+ chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
+ }
+
+ chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO);
+ nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor);
+
+ if (chip_major != CHIP_ID_HIGH &&
+ (chip_minor != CHIP_ID_LOW || chip_minor != CHIP_ID_LOW2))
+ ret = -ENODEV;
+
+ nvt_efm_disable(nvt);
+
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+ nvt->chip_major = chip_major;
+ nvt->chip_minor = chip_minor;
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+ return ret;
+}
+
+static void nvt_cir_ldev_init(struct nvt_dev *nvt)
+{
+ u8 val;
+
+ /* output pin selection (Pin95=CIRRX, Pin96=CIRTX1, WB enabled */
+ val = nvt_cr_read(nvt, CR_OUTPUT_PIN_SEL);
+ val &= OUTPUT_PIN_SEL_MASK;
+ val |= (OUTPUT_ENABLE_CIR | OUTPUT_ENABLE_CIRWB);
+ nvt_cr_write(nvt, val, CR_OUTPUT_PIN_SEL);
+
+ /* Select CIR logical device and enable */
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+ nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+ nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI);
+ nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO);
+
+ nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC);
+
+ nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d",
+ nvt->cir_addr, nvt->cir_irq);
+}
+
+static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt)
+{
+ /* Select ACPI logical device, enable it and CIR Wake */
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
+ nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+ /* Enable CIR Wake via PSOUT# (Pin60) */
+ nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
+
+ /* enable cir interrupt of mouse/keyboard IRQ event */
+ nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
+
+ /* enable pme interrupt of cir wakeup event */
+ nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
+
+ /* Select CIR Wake logical device and enable */
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+ nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+ nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI);
+ nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO);
+
+ nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC);
+
+ nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d",
+ nvt->cir_wake_addr, nvt->cir_wake_irq);
+}
+
+/* clear out the hardware's cir rx fifo */
+static void nvt_clear_cir_fifo(struct nvt_dev *nvt)
+{
+ u8 val;
+
+ val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
+ nvt_cir_reg_write(nvt, val | CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
+}
+
+/* clear out the hardware's cir wake rx fifo */
+static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt)
+{
+ u8 val;
+
+ val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON);
+ nvt_cir_wake_reg_write(nvt, val | CIR_WAKE_FIFOCON_RXFIFOCLR,
+ CIR_WAKE_FIFOCON);
+}
+
+/* clear out the hardware's cir tx fifo */
+static void nvt_clear_tx_fifo(struct nvt_dev *nvt)
+{
+ u8 val;
+
+ val = nvt_cir_reg_read(nvt, CIR_FIFOCON);
+ nvt_cir_reg_write(nvt, val | CIR_FIFOCON_TXFIFOCLR, CIR_FIFOCON);
+}
+
+/* enable RX Trigger Level Reach and Packet End interrupts */
+static void nvt_set_cir_iren(struct nvt_dev *nvt)
+{
+ u8 iren;
+
+ iren = CIR_IREN_RTR | CIR_IREN_PE;
+ nvt_cir_reg_write(nvt, iren, CIR_IREN);
+}
+
+static void nvt_cir_regs_init(struct nvt_dev *nvt)
+{
+ /* set sample limit count (PE interrupt raised when reached) */
+ nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_SLCH);
+ nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_SLCL);
+
+ /* set fifo irq trigger levels */
+ nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV |
+ CIR_FIFOCON_RX_TRIGGER_LEV, CIR_FIFOCON);
+
+ /*
+ * Enable TX and RX, specify carrier on = low, off = high, and set
+ * sample period (currently 50us)
+ */
+ nvt_cir_reg_write(nvt,
+ CIR_IRCON_TXEN | CIR_IRCON_RXEN |
+ CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
+ CIR_IRCON);
+
+ /* clear hardware rx and tx fifos */
+ nvt_clear_cir_fifo(nvt);
+ nvt_clear_tx_fifo(nvt);
+
+ /* clear any and all stray interrupts */
+ nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+ /* and finally, enable interrupts */
+ nvt_set_cir_iren(nvt);
+}
+
+static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
+{
+ /* set number of bytes needed for wake key comparison (default 67) */
+ nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_LEN, CIR_WAKE_FIFO_CMP_DEEP);
+
+ /* set tolerance/variance allowed per byte during wake compare */
+ nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE,
+ CIR_WAKE_FIFO_CMP_TOL);
+
+ /* set sample limit count (PE interrupt raised when reached) */
+ nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH);
+ nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL);
+
+ /* set cir wake fifo rx trigger level (currently 67) */
+ nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV,
+ CIR_WAKE_FIFOCON);
+
+ /*
+ * Enable TX and RX, specific carrier on = low, off = high, and set
+ * sample period (currently 50us)
+ */
+ nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
+ CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
+ CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
+ CIR_WAKE_IRCON);
+
+ /* clear cir wake rx fifo */
+ nvt_clear_cir_wake_fifo(nvt);
+
+ /* clear any and all stray interrupts */
+ nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
+}
+
+static void nvt_enable_wake(struct nvt_dev *nvt)
+{
+ nvt_efm_enable(nvt);
+
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
+ nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE);
+ nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS);
+ nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
+
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
+ nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+ nvt_efm_disable(nvt);
+
+ nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
+ CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
+ CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
+ CIR_WAKE_IRCON);
+ nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
+ nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
+}
+
+/* rx carrier detect only works in learning mode, must be called w/nvt_lock */
+static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt)
+{
+ u32 count, carrier, duration = 0;
+ int i;
+
+ count = nvt_cir_reg_read(nvt, CIR_FCCL) |
+ nvt_cir_reg_read(nvt, CIR_FCCH) << 8;
+
+ for (i = 0; i < nvt->pkts; i++) {
+ if (nvt->buf[i] & BUF_PULSE_BIT)
+ duration += nvt->buf[i] & BUF_LEN_MASK;
+ }
+
+ duration *= SAMPLE_PERIOD;
+
+ if (!count || !duration) {
+ nvt_pr(KERN_NOTICE, "Unable to determine carrier! (c:%u, d:%u)",
+ count, duration);
+ return 0;
+ }
+
+ carrier = (count * 1000000) / duration;
+
+ if ((carrier > MAX_CARRIER) || (carrier < MIN_CARRIER))
+ nvt_dbg("WTF? Carrier frequency out of range!");
+
+ nvt_dbg("Carrier frequency: %u (count %u, duration %u)",
+ carrier, count, duration);
+
+ return carrier;
+}
+
+/*
+ * set carrier frequency
+ *
+ * set carrier on 2 registers: CP & CC
+ * always set CP as 0x81
+ * set CC by SPEC, CC = 3MHz/carrier - 1
+ */
+static int nvt_set_tx_carrier(void *data, u32 carrier)
+{
+ struct nvt_dev *nvt = data;
+ u16 val;
+
+ nvt_cir_reg_write(nvt, 1, CIR_CP);
+ val = 3000000 / (carrier) - 1;
+ nvt_cir_reg_write(nvt, val & 0xff, CIR_CC);
+
+ nvt_dbg("cp: 0x%x cc: 0x%x\n",
+ nvt_cir_reg_read(nvt, CIR_CP), nvt_cir_reg_read(nvt, CIR_CC));
+
+ return 0;
+}
+
+/*
+ * nvt_tx_ir
+ *
+ * 1) clean TX fifo first (handled by AP)
+ * 2) copy data from user space
+ * 3) disable RX interrupts, enable TX interrupts: TTR & TFU
+ * 4) send 9 packets to TX FIFO to open TTR
+ * in interrupt_handler:
+ * 5) send all data out
+ * go back to write():
+ * 6) disable TX interrupts, re-enable RX interupts
+ *
+ * The key problem of this function is user space data may larger than
+ * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to
+ * buf, and keep current copied data buf num in cur_buf_num. But driver's buf
+ * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
+ * set TXFCONT as 0xff, until buf_count less than 0xff.
+ */
+static int nvt_tx_ir(void *priv, int *txbuf, u32 n)
+{
+ struct nvt_dev *nvt = priv;
+ unsigned long flags;
+ size_t cur_count;
+ unsigned int i;
+ u8 iren;
+ int ret;
+
+ spin_lock_irqsave(&nvt->tx.lock, flags);
+
+ if (n >= TX_BUF_LEN) {
+ nvt->tx.buf_count = cur_count = TX_BUF_LEN;
+ ret = TX_BUF_LEN;
+ } else {
+ nvt->tx.buf_count = cur_count = n;
+ ret = n;
+ }
+
+ memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count);
+
+ nvt->tx.cur_buf_num = 0;
+
+ /* save currently enabled interrupts */
+ iren = nvt_cir_reg_read(nvt, CIR_IREN);
+
+ /* now disable all interrupts, save TFU & TTR */
+ nvt_cir_reg_write(nvt, CIR_IREN_TFU | CIR_IREN_TTR, CIR_IREN);
+
+ nvt->tx.tx_state = ST_TX_REPLY;
+
+ nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV_8 |
+ CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON);
+
+ /* trigger TTR interrupt by writing out ones, (yes, it's ugly) */
+ for (i = 0; i < 9; i++)
+ nvt_cir_reg_write(nvt, 0x01, CIR_STXFIFO);
+
+ spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+ wait_event(nvt->tx.queue, nvt->tx.tx_state == ST_TX_REQUEST);
+
+ spin_lock_irqsave(&nvt->tx.lock, flags);
+ nvt->tx.tx_state = ST_TX_NONE;
+ spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+ /* restore enabled interrupts to prior state */
+ nvt_cir_reg_write(nvt, iren, CIR_IREN);
+
+ return ret;
+}
+
+/* dump contents of the last rx buffer we got from the hw rx fifo */
+static void nvt_dump_rx_buf(struct nvt_dev *nvt)
+{
+ int i;
+
+ printk(KERN_DEBUG "%s (len %d): ", __func__, nvt->pkts);
+ for (i = 0; (i < nvt->pkts) && (i < RX_BUF_LEN); i++)
+ printk(KERN_CONT "0x%02x ", nvt->buf[i]);
+ printk(KERN_CONT "\n");
+}
+
+/*
+ * Process raw data in rx driver buffer, store it in raw IR event kfifo,
+ * trigger decode when appropriate.
+ *
+ * We get IR data samples one byte at a time. If the msb is set, its a pulse,
+ * otherwise its a space. The lower 7 bits are the count of SAMPLE_PERIOD
+ * (default 50us) intervals for that pulse/space. A discrete signal is
+ * followed by a series of 0x7f packets, then either 0x7<something> or 0x80
+ * to signal more IR coming (repeats) or end of IR, respectively. We store
+ * sample data in the raw event kfifo until we see 0x7<something> (except f)
+ * or 0x80, at which time, we trigger a decode operation.
+ */
+static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
+{
+ DEFINE_IR_RAW_EVENT(rawir);
+ unsigned int count;
+ u32 carrier;
+ u8 sample;
+ int i;
+
+ nvt_dbg_verbose("%s firing", __func__);
+
+ if (debug)
+ nvt_dump_rx_buf(nvt);
+
+ if (nvt->carrier_detect_enabled)
+ carrier = nvt_rx_carrier_detect(nvt);
+
+ count = nvt->pkts;
+ nvt_dbg_verbose("Processing buffer of len %d", count);
+
+ init_ir_raw_event(&rawir);
+
+ for (i = 0; i < count; i++) {
+ nvt->pkts--;
+ sample = nvt->buf[i];
+
+ rawir.pulse = ((sample & BUF_PULSE_BIT) != 0);
+ rawir.duration = (sample & BUF_LEN_MASK)
+ * SAMPLE_PERIOD * 1000;
+
+ if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) {
+ if (nvt->rawir.pulse == rawir.pulse)
+ nvt->rawir.duration += rawir.duration;
+ else {
+ nvt->rawir.duration = rawir.duration;
+ nvt->rawir.pulse = rawir.pulse;
+ }
+ continue;
+ }
+
+ rawir.duration += nvt->rawir.duration;
+
+ init_ir_raw_event(&nvt->rawir);
+ nvt->rawir.duration = 0;
+ nvt->rawir.pulse = rawir.pulse;
+
+ if (sample == BUF_PULSE_BIT)
+ rawir.pulse = false;
+
+ if (rawir.duration) {
+ nvt_dbg("Storing %s with duration %d",
+ rawir.pulse ? "pulse" : "space",
+ rawir.duration);
+
+ ir_raw_event_store(nvt->rdev, &rawir);
+ }
+
+ /*
+ * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE
+ * indicates end of IR signal, but new data incoming. In both
+ * cases, it means we're ready to call ir_raw_event_handle
+ */
+ if ((sample == BUF_PULSE_BIT) && nvt->pkts) {
+ nvt_dbg("Calling ir_raw_event_handle (signal end)\n");
+ ir_raw_event_handle(nvt->rdev);
+ }
+ }
+
+ nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n");
+ ir_raw_event_handle(nvt->rdev);
+
+ if (nvt->pkts) {
+ nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts);
+ nvt->pkts = 0;
+ }
+
+ nvt_dbg_verbose("%s done", __func__);
+}
+
+static void nvt_handle_rx_fifo_overrun(struct nvt_dev *nvt)
+{
+ nvt_pr(KERN_WARNING, "RX FIFO overrun detected, flushing data!");
+
+ nvt->pkts = 0;
+ nvt_clear_cir_fifo(nvt);
+ ir_raw_event_reset(nvt->rdev);
+}
+
+/* copy data from hardware rx fifo into driver buffer */
+static void nvt_get_rx_ir_data(struct nvt_dev *nvt)
+{
+ unsigned long flags;
+ u8 fifocount, val;
+ unsigned int b_idx;
+ bool overrun = false;
+ int i;
+
+ /* Get count of how many bytes to read from RX FIFO */
+ fifocount = nvt_cir_reg_read(nvt, CIR_RXFCONT);
+ /* if we get 0xff, probably means the logical dev is disabled */
+ if (fifocount == 0xff)
+ return;
+ /* watch out for a fifo overrun condition */
+ else if (fifocount > RX_BUF_LEN) {
+ overrun = true;
+ fifocount = RX_BUF_LEN;
+ }
+
+ nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount);
+
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+
+ b_idx = nvt->pkts;
+
+ /* This should never happen, but lets check anyway... */
+ if (b_idx + fifocount > RX_BUF_LEN) {
+ nvt_process_rx_ir_data(nvt);
+ b_idx = 0;
+ }
+
+ /* Read fifocount bytes from CIR Sample RX FIFO register */
+ for (i = 0; i < fifocount; i++) {
+ val = nvt_cir_reg_read(nvt, CIR_SRXFIFO);
+ nvt->buf[b_idx + i] = val;
+ }
+
+ nvt->pkts += fifocount;
+ nvt_dbg("%s: pkts now %d", __func__, nvt->pkts);
+
+ nvt_process_rx_ir_data(nvt);
+
+ if (overrun)
+ nvt_handle_rx_fifo_overrun(nvt);
+
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+}
+
+static void nvt_cir_log_irqs(u8 status, u8 iren)
+{
+ nvt_pr(KERN_INFO, "IRQ 0x%02x (IREN 0x%02x) :%s%s%s%s%s%s%s%s%s",
+ status, iren,
+ status & CIR_IRSTS_RDR ? " RDR" : "",
+ status & CIR_IRSTS_RTR ? " RTR" : "",
+ status & CIR_IRSTS_PE ? " PE" : "",
+ status & CIR_IRSTS_RFO ? " RFO" : "",
+ status & CIR_IRSTS_TE ? " TE" : "",
+ status & CIR_IRSTS_TTR ? " TTR" : "",
+ status & CIR_IRSTS_TFU ? " TFU" : "",
+ status & CIR_IRSTS_GH ? " GH" : "",
+ status & ~(CIR_IRSTS_RDR | CIR_IRSTS_RTR | CIR_IRSTS_PE |
+ CIR_IRSTS_RFO | CIR_IRSTS_TE | CIR_IRSTS_TTR |
+ CIR_IRSTS_TFU | CIR_IRSTS_GH) ? " ?" : "");
+}
+
+static bool nvt_cir_tx_inactive(struct nvt_dev *nvt)
+{
+ unsigned long flags;
+ bool tx_inactive;
+ u8 tx_state;
+
+ spin_lock_irqsave(&nvt->tx.lock, flags);
+ tx_state = nvt->tx.tx_state;
+ spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+ tx_inactive = (tx_state == ST_TX_NONE);
+
+ return tx_inactive;
+}
+
+/* interrupt service routine for incoming and outgoing CIR data */
+static irqreturn_t nvt_cir_isr(int irq, void *data)
+{
+ struct nvt_dev *nvt = data;
+ u8 status, iren, cur_state;
+ unsigned long flags;
+
+ nvt_dbg_verbose("%s firing", __func__);
+
+ nvt_efm_enable(nvt);
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+ nvt_efm_disable(nvt);
+
+ /*
+ * Get IR Status register contents. Write 1 to ack/clear
+ *
+ * bit: reg name - description
+ * 7: CIR_IRSTS_RDR - RX Data Ready
+ * 6: CIR_IRSTS_RTR - RX FIFO Trigger Level Reach
+ * 5: CIR_IRSTS_PE - Packet End
+ * 4: CIR_IRSTS_RFO - RX FIFO Overrun (RDR will also be set)
+ * 3: CIR_IRSTS_TE - TX FIFO Empty
+ * 2: CIR_IRSTS_TTR - TX FIFO Trigger Level Reach
+ * 1: CIR_IRSTS_TFU - TX FIFO Underrun
+ * 0: CIR_IRSTS_GH - Min Length Detected
+ */
+ status = nvt_cir_reg_read(nvt, CIR_IRSTS);
+ if (!status) {
+ nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__);
+ nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+ return IRQ_RETVAL(IRQ_NONE);
+ }
+
+ /* ack/clear all irq flags we've got */
+ nvt_cir_reg_write(nvt, status, CIR_IRSTS);
+ nvt_cir_reg_write(nvt, 0, CIR_IRSTS);
+
+ /* Interrupt may be shared with CIR Wake, bail if CIR not enabled */
+ iren = nvt_cir_reg_read(nvt, CIR_IREN);
+ if (!iren) {
+ nvt_dbg_verbose("%s exiting, CIR not enabled", __func__);
+ return IRQ_RETVAL(IRQ_NONE);
+ }
+
+ if (debug)
+ nvt_cir_log_irqs(status, iren);
+
+ if (status & CIR_IRSTS_RTR) {
+ /* FIXME: add code for study/learn mode */
+ /* We only do rx if not tx'ing */
+ if (nvt_cir_tx_inactive(nvt))
+ nvt_get_rx_ir_data(nvt);
+ }
+
+ if (status & CIR_IRSTS_PE) {
+ if (nvt_cir_tx_inactive(nvt))
+ nvt_get_rx_ir_data(nvt);
+
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+
+ cur_state = nvt->study_state;
+
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+ if (cur_state == ST_STUDY_NONE)
+ nvt_clear_cir_fifo(nvt);
+ }
+
+ if (status & CIR_IRSTS_TE)
+ nvt_clear_tx_fifo(nvt);
+
+ if (status & CIR_IRSTS_TTR) {
+ unsigned int pos, count;
+ u8 tmp;
+
+ spin_lock_irqsave(&nvt->tx.lock, flags);
+
+ pos = nvt->tx.cur_buf_num;
+ count = nvt->tx.buf_count;
+
+ /* Write data into the hardware tx fifo while pos < count */
+ if (pos < count) {
+ nvt_cir_reg_write(nvt, nvt->tx.buf[pos], CIR_STXFIFO);
+ nvt->tx.cur_buf_num++;
+ /* Disable TX FIFO Trigger Level Reach (TTR) interrupt */
+ } else {
+ tmp = nvt_cir_reg_read(nvt, CIR_IREN);
+ nvt_cir_reg_write(nvt, tmp & ~CIR_IREN_TTR, CIR_IREN);
+ }
+
+ spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+ }
+
+ if (status & CIR_IRSTS_TFU) {
+ spin_lock_irqsave(&nvt->tx.lock, flags);
+ if (nvt->tx.tx_state == ST_TX_REPLY) {
+ nvt->tx.tx_state = ST_TX_REQUEST;
+ wake_up(&nvt->tx.queue);
+ }
+ spin_unlock_irqrestore(&nvt->tx.lock, flags);
+ }
+
+ nvt_dbg_verbose("%s done", __func__);
+ return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+/* Interrupt service routine for CIR Wake */
+static irqreturn_t nvt_cir_wake_isr(int irq, void *data)
+{
+ u8 status, iren, val;
+ struct nvt_dev *nvt = data;
+ unsigned long flags;
+
+ nvt_dbg_wake("%s firing", __func__);
+
+ status = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS);
+ if (!status)
+ return IRQ_RETVAL(IRQ_NONE);
+
+ if (status & CIR_WAKE_IRSTS_IR_PENDING)
+ nvt_clear_cir_wake_fifo(nvt);
+
+ nvt_cir_wake_reg_write(nvt, status, CIR_WAKE_IRSTS);
+ nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IRSTS);
+
+ /* Interrupt may be shared with CIR, bail if Wake not enabled */
+ iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN);
+ if (!iren) {
+ nvt_dbg_wake("%s exiting, wake not enabled", __func__);
+ return IRQ_RETVAL(IRQ_HANDLED);
+ }
+
+ if ((status & CIR_WAKE_IRSTS_PE) &&
+ (nvt->wake_state == ST_WAKE_START)) {
+ while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)) {
+ val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY);
+ nvt_dbg("setting wake up key: 0x%x", val);
+ }
+
+ nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+ nvt->wake_state = ST_WAKE_FINISH;
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+ }
+
+ nvt_dbg_wake("%s done", __func__);
+ return IRQ_RETVAL(IRQ_HANDLED);
+}
+
+static void nvt_enable_cir(struct nvt_dev *nvt)
+{
+ /* set function enable flags */
+ nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN |
+ CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
+ CIR_IRCON);
+
+ nvt_efm_enable(nvt);
+
+ /* enable the CIR logical device */
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+ nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+ nvt_efm_disable(nvt);
+
+ /* clear all pending interrupts */
+ nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+ /* enable interrupts */
+ nvt_set_cir_iren(nvt);
+}
+
+static void nvt_disable_cir(struct nvt_dev *nvt)
+{
+ /* disable CIR interrupts */
+ nvt_cir_reg_write(nvt, 0, CIR_IREN);
+
+ /* clear any and all pending interrupts */
+ nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+ /* clear all function enable flags */
+ nvt_cir_reg_write(nvt, 0, CIR_IRCON);
+
+ /* clear hardware rx and tx fifos */
+ nvt_clear_cir_fifo(nvt);
+ nvt_clear_tx_fifo(nvt);
+
+ nvt_efm_enable(nvt);
+
+ /* disable the CIR logical device */
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+ nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
+
+ nvt_efm_disable(nvt);
+}
+
+static int nvt_open(void *data)
+{
+ struct nvt_dev *nvt = (struct nvt_dev *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+ nvt->in_use = true;
+ nvt_enable_cir(nvt);
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+ return 0;
+}
+
+static void nvt_close(void *data)
+{
+ struct nvt_dev *nvt = (struct nvt_dev *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+ nvt->in_use = false;
+ nvt_disable_cir(nvt);
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+}
+
+/* Allocate memory, probe hardware, and initialize everything */
+static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
+{
+ struct nvt_dev *nvt = NULL;
+ struct input_dev *rdev = NULL;
+ struct ir_dev_props *props = NULL;
+ int ret = -ENOMEM;
+
+ nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL);
+ if (!nvt)
+ return ret;
+
+ props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+ if (!props)
+ goto failure;
+
+ /* input device for IR remote (and tx) */
+ rdev = input_allocate_device();
+ if (!rdev)
+ goto failure;
+
+ ret = -ENODEV;
+ /* validate pnp resources */
+ if (!pnp_port_valid(pdev, 0) ||
+ pnp_port_len(pdev, 0) < CIR_IOREG_LENGTH) {
+ dev_err(&pdev->dev, "IR PNP Port not valid!\n");
+ goto failure;
+ }
+
+ if (!pnp_irq_valid(pdev, 0)) {
+ dev_err(&pdev->dev, "PNP IRQ not valid!\n");
+ goto failure;
+ }
+
+ if (!pnp_port_valid(pdev, 1) ||
+ pnp_port_len(pdev, 1) < CIR_IOREG_LENGTH) {
+ dev_err(&pdev->dev, "Wake PNP Port not valid!\n");
+ goto failure;
+ }
+
+ nvt->cir_addr = pnp_port_start(pdev, 0);
+ nvt->cir_irq = pnp_irq(pdev, 0);
+
+ nvt->cir_wake_addr = pnp_port_start(pdev, 1);
+ /* irq is always shared between cir and cir wake */
+ nvt->cir_wake_irq = nvt->cir_irq;
+
+ nvt->cr_efir = CR_EFIR;
+ nvt->cr_efdr = CR_EFDR;
+
+ spin_lock_init(&nvt->nvt_lock);
+ spin_lock_init(&nvt->tx.lock);
+ init_ir_raw_event(&nvt->rawir);
+
+ ret = -EBUSY;
+ /* now claim resources */
+ if (!request_region(nvt->cir_addr,
+ CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
+ goto failure;
+
+ if (request_irq(nvt->cir_irq, nvt_cir_isr, IRQF_SHARED,
+ NVT_DRIVER_NAME, (void *)nvt))
+ goto failure;
+
+ if (!request_region(nvt->cir_wake_addr,
+ CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
+ goto failure;
+
+ if (request_irq(nvt->cir_wake_irq, nvt_cir_wake_isr, IRQF_SHARED,
+ NVT_DRIVER_NAME, (void *)nvt))
+ goto failure;
+
+ pnp_set_drvdata(pdev, nvt);
+ nvt->pdev = pdev;
+
+ init_waitqueue_head(&nvt->tx.queue);
+
+ ret = nvt_hw_detect(nvt);
+ if (ret)
+ goto failure;
+
+ /* Initialize CIR & CIR Wake Logical Devices */
+ nvt_efm_enable(nvt);
+ nvt_cir_ldev_init(nvt);
+ nvt_cir_wake_ldev_init(nvt);
+ nvt_efm_disable(nvt);
+
+ /* Initialize CIR & CIR Wake Config Registers */
+ nvt_cir_regs_init(nvt);
+ nvt_cir_wake_regs_init(nvt);
+
+ /* Set up ir-core props */
+ props->priv = nvt;
+ props->driver_type = RC_DRIVER_IR_RAW;
+ props->allowed_protos = IR_TYPE_ALL;
+ props->open = nvt_open;
+ props->close = nvt_close;
+#if 0
+ props->min_timeout = XYZ;
+ props->max_timeout = XYZ;
+ props->timeout = XYZ;
+ /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
+ props->rx_resolution = XYZ;
+
+ /* tx bits */
+ props->tx_resolution = XYZ;
+#endif
+ props->tx_ir = nvt_tx_ir;
+ props->s_tx_carrier = nvt_set_tx_carrier;
+
+ rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver";
+ rdev->id.bustype = BUS_HOST;
+ rdev->id.vendor = PCI_VENDOR_ID_WINBOND2;
+ rdev->id.product = nvt->chip_major;
+ rdev->id.version = nvt->chip_minor;
+
+ nvt->props = props;
+ nvt->rdev = rdev;
+
+ device_set_wakeup_capable(&pdev->dev, 1);
+ device_set_wakeup_enable(&pdev->dev, 1);
+
+ ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME);
+ if (ret)
+ goto failure;
+
+ nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n");
+ if (debug) {
+ cir_dump_regs(nvt);
+ cir_wake_dump_regs(nvt);
+ }
+
+ return 0;
+
+failure:
+ if (nvt->cir_irq)
+ free_irq(nvt->cir_irq, nvt);
+ if (nvt->cir_addr)
+ release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
+
+ if (nvt->cir_wake_irq)
+ free_irq(nvt->cir_wake_irq, nvt);
+ if (nvt->cir_wake_addr)
+ release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
+
+ input_free_device(rdev);
+ kfree(props);
+ kfree(nvt);
+
+ return ret;
+}
+
+static void __devexit nvt_remove(struct pnp_dev *pdev)
+{
+ struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+ /* disable CIR */
+ nvt_cir_reg_write(nvt, 0, CIR_IREN);
+ nvt_disable_cir(nvt);
+ /* enable CIR Wake (for IR power-on) */
+ nvt_enable_wake(nvt);
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+ /* free resources */
+ free_irq(nvt->cir_irq, nvt);
+ free_irq(nvt->cir_wake_irq, nvt);
+ release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
+ release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
+
+ ir_input_unregister(nvt->rdev);
+
+ kfree(nvt->props);
+ kfree(nvt);
+}
+
+static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+ struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+ unsigned long flags;
+
+ nvt_dbg("%s called", __func__);
+
+ /* zero out misc state tracking */
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+ nvt->study_state = ST_STUDY_NONE;
+ nvt->wake_state = ST_WAKE_NONE;
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
+ spin_lock_irqsave(&nvt->tx.lock, flags);
+ nvt->tx.tx_state = ST_TX_NONE;
+ spin_unlock_irqrestore(&nvt->tx.lock, flags);
+
+ /* disable all CIR interrupts */
+ nvt_cir_reg_write(nvt, 0, CIR_IREN);
+
+ nvt_efm_enable(nvt);
+
+ /* disable cir logical dev */
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+ nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
+
+ nvt_efm_disable(nvt);
+
+ /* make sure wake is enabled */
+ nvt_enable_wake(nvt);
+
+ return 0;
+}
+
+static int nvt_resume(struct pnp_dev *pdev)
+{
+ int ret = 0;
+ struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+
+ nvt_dbg("%s called", __func__);
+
+ /* open interrupt */
+ nvt_set_cir_iren(nvt);
+
+ /* Enable CIR logical device */
+ nvt_efm_enable(nvt);
+ nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
+ nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+
+ nvt_efm_disable(nvt);
+
+ nvt_cir_regs_init(nvt);
+ nvt_cir_wake_regs_init(nvt);
+
+ return ret;
+}
+
+static void nvt_shutdown(struct pnp_dev *pdev)
+{
+ struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+ nvt_enable_wake(nvt);
+}
+
+static const struct pnp_device_id nvt_ids[] = {
+ { "WEC0530", 0 }, /* CIR */
+ { "NTN0530", 0 }, /* CIR for new chip's pnp id*/
+ { "", 0 },
+};
+
+static struct pnp_driver nvt_driver = {
+ .name = NVT_DRIVER_NAME,
+ .id_table = nvt_ids,
+ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+ .probe = nvt_probe,
+ .remove = __devexit_p(nvt_remove),
+ .suspend = nvt_suspend,
+ .resume = nvt_resume,
+ .shutdown = nvt_shutdown,
+};
+
+int nvt_init(void)
+{
+ return pnp_register_driver(&nvt_driver);
+}
+
+void nvt_exit(void)
+{
+ pnp_unregister_driver(&nvt_driver);
+}
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging output");
+
+MODULE_DEVICE_TABLE(pnp, nvt_ids);
+MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver");
+
+MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(nvt_init);
+module_exit(nvt_exit);
--- /dev/null
+/*
+ * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
+ *
+ * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
+ * Copyright (C) 2009 Nuvoton PS Team
+ *
+ * Special thanks to Nuvoton for providing hardware, spec sheets and
+ * sample code upon which portions of this driver are based. Indirect
+ * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
+ * modeled after.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/spinlock.h>
+#include <linux/ioctl.h>
+
+/* platform driver name to register */
+#define NVT_DRIVER_NAME "nuvoton-cir"
+
+/* debugging module parameter */
+static int debug;
+
+
+#define nvt_pr(level, text, ...) \
+ printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+#define nvt_dbg(text, ...) \
+ if (debug) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define nvt_dbg_verbose(text, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define nvt_dbg_wake(text, ...) \
+ if (debug > 2) \
+ printk(KERN_DEBUG \
+ KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+
+/*
+ * Original lirc driver said min value of 76, and recommended value of 256
+ * for the buffer length, but then used 2048. Never mind that the size of the
+ * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm
+ * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes),
+ * and I don't have TX-capable hardware to test/debug on...
+ */
+#define TX_BUF_LEN 256
+#define RX_BUF_LEN 32
+
+struct nvt_dev {
+ struct pnp_dev *pdev;
+ struct input_dev *rdev;
+ struct ir_dev_props *props;
+ struct ir_raw_event rawir;
+
+ spinlock_t nvt_lock;
+ bool in_use;
+
+ /* for rx */
+ u8 buf[RX_BUF_LEN];
+ unsigned int pkts;
+
+ struct {
+ spinlock_t lock;
+ u8 buf[TX_BUF_LEN];
+ unsigned int buf_count;
+ unsigned int cur_buf_num;
+ wait_queue_head_t queue;
+ u8 tx_state;
+ } tx;
+
+ /* EFER Config register index/data pair */
+ u8 cr_efir;
+ u8 cr_efdr;
+
+ /* hardware I/O settings */
+ unsigned long cir_addr;
+ unsigned long cir_wake_addr;
+ int cir_irq;
+ int cir_wake_irq;
+
+ /* hardware id */
+ u8 chip_major;
+ u8 chip_minor;
+
+ /* hardware features */
+ bool hw_learning_capable;
+ bool hw_tx_capable;
+
+ /* rx settings */
+ bool learning_enabled;
+ bool carrier_detect_enabled;
+
+ /* track cir wake state */
+ u8 wake_state;
+ /* for study */
+ u8 study_state;
+ /* carrier period = 1 / frequency */
+ u32 carrier;
+};
+
+/* study states */
+#define ST_STUDY_NONE 0x0
+#define ST_STUDY_START 0x1
+#define ST_STUDY_CARRIER 0x2
+#define ST_STUDY_ALL_RECV 0x4
+
+/* wake states */
+#define ST_WAKE_NONE 0x0
+#define ST_WAKE_START 0x1
+#define ST_WAKE_FINISH 0x2
+
+/* receive states */
+#define ST_RX_WAIT_7F 0x1
+#define ST_RX_WAIT_HEAD 0x2
+#define ST_RX_WAIT_SILENT_END 0x4
+
+/* send states */
+#define ST_TX_NONE 0x0
+#define ST_TX_REQUEST 0x2
+#define ST_TX_REPLY 0x4
+
+/* buffer packet constants */
+#define BUF_PULSE_BIT 0x80
+#define BUF_LEN_MASK 0x7f
+#define BUF_REPEAT_BYTE 0x70
+#define BUF_REPEAT_MASK 0xf0
+
+/* CIR settings */
+
+/* total length of CIR and CIR WAKE */
+#define CIR_IOREG_LENGTH 0x0f
+
+/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */
+#define CIR_RX_LIMIT_COUNT 0x7d0
+
+/* CIR Regs */
+#define CIR_IRCON 0x00
+#define CIR_IRSTS 0x01
+#define CIR_IREN 0x02
+#define CIR_RXFCONT 0x03
+#define CIR_CP 0x04
+#define CIR_CC 0x05
+#define CIR_SLCH 0x06
+#define CIR_SLCL 0x07
+#define CIR_FIFOCON 0x08
+#define CIR_IRFIFOSTS 0x09
+#define CIR_SRXFIFO 0x0a
+#define CIR_TXFCONT 0x0b
+#define CIR_STXFIFO 0x0c
+#define CIR_FCCH 0x0d
+#define CIR_FCCL 0x0e
+#define CIR_IRFSM 0x0f
+
+/* CIR IRCON settings */
+#define CIR_IRCON_RECV 0x80
+#define CIR_IRCON_WIREN 0x40
+#define CIR_IRCON_TXEN 0x20
+#define CIR_IRCON_RXEN 0x10
+#define CIR_IRCON_WRXINV 0x08
+#define CIR_IRCON_RXINV 0x04
+
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_1 0x00
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_25 0x01
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_50 0x02
+#define CIR_IRCON_SAMPLE_PERIOD_SEL_100 0x03
+
+/* FIXME: make this a runtime option */
+/* select sample period as 50us */
+#define CIR_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50
+
+/* CIR IRSTS settings */
+#define CIR_IRSTS_RDR 0x80
+#define CIR_IRSTS_RTR 0x40
+#define CIR_IRSTS_PE 0x20
+#define CIR_IRSTS_RFO 0x10
+#define CIR_IRSTS_TE 0x08
+#define CIR_IRSTS_TTR 0x04
+#define CIR_IRSTS_TFU 0x02
+#define CIR_IRSTS_GH 0x01
+
+/* CIR IREN settings */
+#define CIR_IREN_RDR 0x80
+#define CIR_IREN_RTR 0x40
+#define CIR_IREN_PE 0x20
+#define CIR_IREN_RFO 0x10
+#define CIR_IREN_TE 0x08
+#define CIR_IREN_TTR 0x04
+#define CIR_IREN_TFU 0x02
+#define CIR_IREN_GH 0x01
+
+/* CIR FIFOCON settings */
+#define CIR_FIFOCON_TXFIFOCLR 0x80
+
+#define CIR_FIFOCON_TX_TRIGGER_LEV_31 0x00
+#define CIR_FIFOCON_TX_TRIGGER_LEV_24 0x10
+#define CIR_FIFOCON_TX_TRIGGER_LEV_16 0x20
+#define CIR_FIFOCON_TX_TRIGGER_LEV_8 0x30
+
+/* FIXME: make this a runtime option */
+/* select TX trigger level as 16 */
+#define CIR_FIFOCON_TX_TRIGGER_LEV CIR_FIFOCON_TX_TRIGGER_LEV_16
+
+#define CIR_FIFOCON_RXFIFOCLR 0x08
+
+#define CIR_FIFOCON_RX_TRIGGER_LEV_1 0x00
+#define CIR_FIFOCON_RX_TRIGGER_LEV_8 0x01
+#define CIR_FIFOCON_RX_TRIGGER_LEV_16 0x02
+#define CIR_FIFOCON_RX_TRIGGER_LEV_24 0x03
+
+/* FIXME: make this a runtime option */
+/* select RX trigger level as 24 */
+#define CIR_FIFOCON_RX_TRIGGER_LEV CIR_FIFOCON_RX_TRIGGER_LEV_24
+
+/* CIR IRFIFOSTS settings */
+#define CIR_IRFIFOSTS_IR_PENDING 0x80
+#define CIR_IRFIFOSTS_RX_GS 0x40
+#define CIR_IRFIFOSTS_RX_FTA 0x20
+#define CIR_IRFIFOSTS_RX_EMPTY 0x10
+#define CIR_IRFIFOSTS_RX_FULL 0x08
+#define CIR_IRFIFOSTS_TX_FTA 0x04
+#define CIR_IRFIFOSTS_TX_EMPTY 0x02
+#define CIR_IRFIFOSTS_TX_FULL 0x01
+
+
+/* CIR WAKE UP Regs */
+#define CIR_WAKE_IRCON 0x00
+#define CIR_WAKE_IRSTS 0x01
+#define CIR_WAKE_IREN 0x02
+#define CIR_WAKE_FIFO_CMP_DEEP 0x03
+#define CIR_WAKE_FIFO_CMP_TOL 0x04
+#define CIR_WAKE_FIFO_COUNT 0x05
+#define CIR_WAKE_SLCH 0x06
+#define CIR_WAKE_SLCL 0x07
+#define CIR_WAKE_FIFOCON 0x08
+#define CIR_WAKE_SRXFSTS 0x09
+#define CIR_WAKE_SAMPLE_RX_FIFO 0x0a
+#define CIR_WAKE_WR_FIFO_DATA 0x0b
+#define CIR_WAKE_RD_FIFO_ONLY 0x0c
+#define CIR_WAKE_RD_FIFO_ONLY_IDX 0x0d
+#define CIR_WAKE_FIFO_IGNORE 0x0e
+#define CIR_WAKE_IRFSM 0x0f
+
+/* CIR WAKE UP IRCON settings */
+#define CIR_WAKE_IRCON_DEC_RST 0x80
+#define CIR_WAKE_IRCON_MODE1 0x40
+#define CIR_WAKE_IRCON_MODE0 0x20
+#define CIR_WAKE_IRCON_RXEN 0x10
+#define CIR_WAKE_IRCON_R 0x08
+#define CIR_WAKE_IRCON_RXINV 0x04
+
+/* FIXME/jarod: make this a runtime option */
+/* select a same sample period like cir register */
+#define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50
+
+/* CIR WAKE IRSTS Bits */
+#define CIR_WAKE_IRSTS_RDR 0x80
+#define CIR_WAKE_IRSTS_RTR 0x40
+#define CIR_WAKE_IRSTS_PE 0x20
+#define CIR_WAKE_IRSTS_RFO 0x10
+#define CIR_WAKE_IRSTS_GH 0x08
+#define CIR_WAKE_IRSTS_IR_PENDING 0x01
+
+/* CIR WAKE UP IREN Bits */
+#define CIR_WAKE_IREN_RDR 0x80
+#define CIR_WAKE_IREN_RTR 0x40
+#define CIR_WAKE_IREN_PE 0x20
+#define CIR_WAKE_IREN_RFO 0x10
+#define CIR_WAKE_IREN_TE 0x08
+#define CIR_WAKE_IREN_TTR 0x04
+#define CIR_WAKE_IREN_TFU 0x02
+#define CIR_WAKE_IREN_GH 0x01
+
+/* CIR WAKE FIFOCON settings */
+#define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08
+
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 0x00
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66 0x01
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65 0x02
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64 0x03
+
+/* FIXME: make this a runtime option */
+/* select WAKE UP RX trigger level as 67 */
+#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67
+
+/* CIR WAKE SRXFSTS settings */
+#define CIR_WAKE_IRFIFOSTS_RX_GS 0x80
+#define CIR_WAKE_IRFIFOSTS_RX_FTA 0x40
+#define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20
+#define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10
+
+/* CIR Wake FIFO buffer is 67 bytes long */
+#define CIR_WAKE_FIFO_LEN 67
+/* CIR Wake byte comparison tolerance */
+#define CIR_WAKE_CMP_TOLERANCE 5
+
+/*
+ * Extended Function Enable Registers:
+ * Extended Function Index Register
+ * Extended Function Data Register
+ */
+#define CR_EFIR 0x2e
+#define CR_EFDR 0x2f
+
+/* Possible alternate EFER values, depends on how the chip is wired */
+#define CR_EFIR2 0x4e
+#define CR_EFDR2 0x4f
+
+/* Extended Function Mode enable/disable magic values */
+#define EFER_EFM_ENABLE 0x87
+#define EFER_EFM_DISABLE 0xaa
+
+/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
+#define CHIP_ID_HIGH 0xb4
+#define CHIP_ID_LOW 0x72
+#define CHIP_ID_LOW2 0x73
+
+/* Config regs we need to care about */
+#define CR_SOFTWARE_RESET 0x02
+#define CR_LOGICAL_DEV_SEL 0x07
+#define CR_CHIP_ID_HI 0x20
+#define CR_CHIP_ID_LO 0x21
+#define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */
+#define CR_OUTPUT_PIN_SEL 0x27
+#define CR_LOGICAL_DEV_EN 0x30 /* valid for all logical devices */
+/* next three regs valid for both the CIR and CIR_WAKE logical devices */
+#define CR_CIR_BASE_ADDR_HI 0x60
+#define CR_CIR_BASE_ADDR_LO 0x61
+#define CR_CIR_IRQ_RSRC 0x70
+/* next three regs valid only for ACPI logical dev */
+#define CR_ACPI_CIR_WAKE 0xe0
+#define CR_ACPI_IRQ_EVENTS 0xf6
+#define CR_ACPI_IRQ_EVENTS2 0xf7
+
+/* Logical devices that we need to care about */
+#define LOGICAL_DEV_LPT 0x01
+#define LOGICAL_DEV_CIR 0x06
+#define LOGICAL_DEV_ACPI 0x0a
+#define LOGICAL_DEV_CIR_WAKE 0x0e
+
+#define LOGICAL_DEV_DISABLE 0x00
+#define LOGICAL_DEV_ENABLE 0x01
+
+#define CIR_WAKE_ENABLE_BIT 0x08
+#define CIR_INTR_MOUSE_IRQ_BIT 0x80
+#define PME_INTR_CIR_PASS_BIT 0x08
+
+#define OUTPUT_PIN_SEL_MASK 0xbc
+#define OUTPUT_ENABLE_CIR 0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */
+#define OUTPUT_ENABLE_CIRWB 0x40 /* enable wide-band sensor */
+
+/* MCE CIR signal length, related on sample period */
+
+/* MCE CIR controller signal length: about 43ms
+ * 43ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define CONTROLLER_BUF_LEN_MIN 830
+
+/* MCE CIR keyboard signal length: about 26ms
+ * 26ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define KEYBOARD_BUF_LEN_MAX 650
+#define KEYBOARD_BUF_LEN_MIN 610
+
+/* MCE CIR mouse signal length: about 24ms
+ * 24ms / 50us (sample period) * 0.85 (inaccuracy)
+ */
+#define MOUSE_BUF_LEN_MIN 565
+
+#define CIR_SAMPLE_PERIOD 50
+#define CIR_SAMPLE_LOW_INACCURACY 0.85
+
+/* MAX silence time that driver will sent to lirc */
+#define MAX_SILENCE_TIME 60000
+
+#if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100
+#define SAMPLE_PERIOD 100
+
+#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50
+#define SAMPLE_PERIOD 50
+
+#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25
+#define SAMPLE_PERIOD 25
+
+#else
+#define SAMPLE_PERIOD 1
+#endif
+
+/* as VISTA MCE definition, valid carrier value */
+#define MAX_CARRIER 60000
+#define MIN_CARRIER 30000
--- /dev/null
+/* ir-raw-event.c - handle IR Pulse/Space event
+ *
+ * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <media/ir-core.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+/* Used to handle IR raw handler extensions */
+static LIST_HEAD(rc_map_list);
+static DEFINE_SPINLOCK(rc_map_lock);
+
+static struct rc_keymap *seek_rc_map(const char *name)
+{
+ struct rc_keymap *map = NULL;
+
+ spin_lock(&rc_map_lock);
+ list_for_each_entry(map, &rc_map_list, list) {
+ if (!strcmp(name, map->map.name)) {
+ spin_unlock(&rc_map_lock);
+ return map;
+ }
+ }
+ spin_unlock(&rc_map_lock);
+
+ return NULL;
+}
+
+struct ir_scancode_table *get_rc_map(const char *name)
+{
+
+ struct rc_keymap *map;
+
+ map = seek_rc_map(name);
+#ifdef MODULE
+ if (!map) {
+ int rc = request_module(name);
+ if (rc < 0) {
+ printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
+ return NULL;
+ }
+ msleep(20); /* Give some time for IR to register */
+
+ map = seek_rc_map(name);
+ }
+#endif
+ if (!map) {
+ printk(KERN_ERR "IR keymap %s not found\n", name);
+ return NULL;
+ }
+
+ printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
+
+ return &map->map;
+}
+EXPORT_SYMBOL_GPL(get_rc_map);
+
+int ir_register_map(struct rc_keymap *map)
+{
+ spin_lock(&rc_map_lock);
+ list_add_tail(&map->list, &rc_map_list);
+ spin_unlock(&rc_map_lock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ir_register_map);
+
+void ir_unregister_map(struct rc_keymap *map)
+{
+ spin_lock(&rc_map_lock);
+ list_del(&map->list);
+ spin_unlock(&rc_map_lock);
+}
+EXPORT_SYMBOL_GPL(ir_unregister_map);
+
+
+static struct ir_scancode empty[] = {
+ { 0x2a, KEY_COFFEE },
+};
+
+static struct rc_keymap empty_map = {
+ .map = {
+ .scan = empty,
+ .size = ARRAY_SIZE(empty),
+ .ir_type = IR_TYPE_UNKNOWN, /* Legacy IR type */
+ .name = RC_MAP_EMPTY,
+ }
+};
+
+int ir_rcmap_init(void)
+{
+ return ir_register_map(&empty_map);
+}
+
+void ir_rcmap_cleanup(void)
+{
+ ir_unregister_map(&empty_map);
+}
--- /dev/null
+/*
+ * Streamzap Remote Control driver
+ *
+ * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
+ * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
+ *
+ * This driver was based on the work of Greg Wickham and Adrian
+ * Dewhurst. It was substantially rewritten to support correct signal
+ * gaps and now maintains a delay buffer, which is used to present
+ * consistent timing behaviour to user space applications. Without the
+ * delay buffer an ugly hack would be required in lircd, which can
+ * cause sluggish signal decoding in certain situations.
+ *
+ * Ported to in-kernel ir-core interface by Jarod Wilson
+ *
+ * This driver is based on the USB skeleton driver packaged with the
+ * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/ir-core.h>
+
+#define DRIVER_VERSION "1.61"
+#define DRIVER_NAME "streamzap"
+#define DRIVER_DESC "Streamzap Remote Control driver"
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+#define USB_STREAMZAP_VENDOR_ID 0x0e9c
+#define USB_STREAMZAP_PRODUCT_ID 0x0000
+
+/* table of devices that work with this driver */
+static struct usb_device_id streamzap_table[] = {
+ /* Streamzap Remote Control */
+ { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
+ /* Terminating entry */
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, streamzap_table);
+
+#define SZ_PULSE_MASK 0xf0
+#define SZ_SPACE_MASK 0x0f
+#define SZ_TIMEOUT 0xff
+#define SZ_RESOLUTION 256
+
+/* number of samples buffered */
+#define SZ_BUF_LEN 128
+
+/* from ir-rc5-sz-decoder.c */
+#ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
+#define load_rc5_sz_decode() request_module("ir-rc5-sz-decoder")
+#else
+#define load_rc5_sz_decode() 0
+#endif
+
+enum StreamzapDecoderState {
+ PulseSpace,
+ FullPulse,
+ FullSpace,
+ IgnorePulse
+};
+
+/* structure to hold our device specific stuff */
+struct streamzap_ir {
+
+ /* ir-core */
+ struct ir_dev_props *props;
+
+ /* core device info */
+ struct device *dev;
+ struct input_dev *idev;
+
+ /* usb */
+ struct usb_device *usbdev;
+ struct usb_interface *interface;
+ struct usb_endpoint_descriptor *endpoint;
+ struct urb *urb_in;
+
+ /* buffer & dma */
+ unsigned char *buf_in;
+ dma_addr_t dma_in;
+ unsigned int buf_in_len;
+
+ /* track what state we're in */
+ enum StreamzapDecoderState decoder_state;
+ /* tracks whether we are currently receiving some signal */
+ bool idle;
+ /* sum of signal lengths received since signal start */
+ unsigned long sum;
+ /* start time of signal; necessary for gap tracking */
+ struct timeval signal_last;
+ struct timeval signal_start;
+ bool timeout_enabled;
+
+ char name[128];
+ char phys[64];
+};
+
+
+/* local function prototypes */
+static int streamzap_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+static void streamzap_disconnect(struct usb_interface *interface);
+static void streamzap_callback(struct urb *urb);
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
+static int streamzap_resume(struct usb_interface *intf);
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver streamzap_driver = {
+ .name = DRIVER_NAME,
+ .probe = streamzap_probe,
+ .disconnect = streamzap_disconnect,
+ .suspend = streamzap_suspend,
+ .resume = streamzap_resume,
+ .id_table = streamzap_table,
+};
+
+static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
+{
+ dev_dbg(sz->dev, "Storing %s with duration %u us\n",
+ (rawir.pulse ? "pulse" : "space"), rawir.duration);
+ ir_raw_event_store_with_filter(sz->idev, &rawir);
+}
+
+static void sz_push_full_pulse(struct streamzap_ir *sz,
+ unsigned char value)
+{
+ DEFINE_IR_RAW_EVENT(rawir);
+
+ if (sz->idle) {
+ long deltv;
+
+ sz->signal_last = sz->signal_start;
+ do_gettimeofday(&sz->signal_start);
+
+ deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
+ rawir.pulse = false;
+ if (deltv > 15) {
+ /* really long time */
+ rawir.duration = IR_MAX_DURATION;
+ } else {
+ rawir.duration = (int)(deltv * 1000000 +
+ sz->signal_start.tv_usec -
+ sz->signal_last.tv_usec);
+ rawir.duration -= sz->sum;
+ rawir.duration *= 1000;
+ rawir.duration &= IR_MAX_DURATION;
+ }
+ sz_push(sz, rawir);
+
+ sz->idle = false;
+ sz->sum = 0;
+ }
+
+ rawir.pulse = true;
+ rawir.duration = ((int) value) * SZ_RESOLUTION;
+ rawir.duration += SZ_RESOLUTION / 2;
+ sz->sum += rawir.duration;
+ rawir.duration *= 1000;
+ rawir.duration &= IR_MAX_DURATION;
+ sz_push(sz, rawir);
+}
+
+static void sz_push_half_pulse(struct streamzap_ir *sz,
+ unsigned char value)
+{
+ sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
+}
+
+static void sz_push_full_space(struct streamzap_ir *sz,
+ unsigned char value)
+{
+ DEFINE_IR_RAW_EVENT(rawir);
+
+ rawir.pulse = false;
+ rawir.duration = ((int) value) * SZ_RESOLUTION;
+ rawir.duration += SZ_RESOLUTION / 2;
+ sz->sum += rawir.duration;
+ rawir.duration *= 1000;
+ sz_push(sz, rawir);
+}
+
+static void sz_push_half_space(struct streamzap_ir *sz,
+ unsigned long value)
+{
+ sz_push_full_space(sz, value & SZ_SPACE_MASK);
+}
+
+/**
+ * streamzap_callback - usb IRQ handler callback
+ *
+ * This procedure is invoked on reception of data from
+ * the usb remote.
+ */
+static void streamzap_callback(struct urb *urb)
+{
+ struct streamzap_ir *sz;
+ unsigned int i;
+ int len;
+
+ if (!urb)
+ return;
+
+ sz = urb->context;
+ len = urb->actual_length;
+
+ switch (urb->status) {
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /*
+ * this urb is terminated, clean up.
+ * sz might already be invalid at this point
+ */
+ dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
+ return;
+ default:
+ break;
+ }
+
+ dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
+ for (i = 0; i < len; i++) {
+ dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
+ i, (unsigned char)sz->buf_in[i]);
+ switch (sz->decoder_state) {
+ case PulseSpace:
+ if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
+ SZ_PULSE_MASK) {
+ sz->decoder_state = FullPulse;
+ continue;
+ } else if ((sz->buf_in[i] & SZ_SPACE_MASK)
+ == SZ_SPACE_MASK) {
+ sz_push_half_pulse(sz, sz->buf_in[i]);
+ sz->decoder_state = FullSpace;
+ continue;
+ } else {
+ sz_push_half_pulse(sz, sz->buf_in[i]);
+ sz_push_half_space(sz, sz->buf_in[i]);
+ }
+ break;
+ case FullPulse:
+ sz_push_full_pulse(sz, sz->buf_in[i]);
+ sz->decoder_state = IgnorePulse;
+ break;
+ case FullSpace:
+ if (sz->buf_in[i] == SZ_TIMEOUT) {
+ DEFINE_IR_RAW_EVENT(rawir);
+
+ rawir.pulse = false;
+ rawir.duration = sz->props->timeout;
+ sz->idle = true;
+ if (sz->timeout_enabled)
+ sz_push(sz, rawir);
+ ir_raw_event_handle(sz->idev);
+ } else {
+ sz_push_full_space(sz, sz->buf_in[i]);
+ }
+ sz->decoder_state = PulseSpace;
+ break;
+ case IgnorePulse:
+ if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
+ SZ_SPACE_MASK) {
+ sz->decoder_state = FullSpace;
+ continue;
+ }
+ sz_push_half_space(sz, sz->buf_in[i]);
+ sz->decoder_state = PulseSpace;
+ break;
+ }
+ }
+
+ usb_submit_urb(urb, GFP_ATOMIC);
+
+ return;
+}
+
+static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+{
+ struct input_dev *idev;
+ struct ir_dev_props *props;
+ struct device *dev = sz->dev;
+ int ret;
+
+ idev = input_allocate_device();
+ if (!idev) {
+ dev_err(dev, "remote input dev allocation failed\n");
+ goto idev_alloc_failed;
+ }
+
+ props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
+ if (!props) {
+ dev_err(dev, "remote ir dev props allocation failed\n");
+ goto props_alloc_failed;
+ }
+
+ snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
+ "Receiver (%04x:%04x)",
+ le16_to_cpu(sz->usbdev->descriptor.idVendor),
+ le16_to_cpu(sz->usbdev->descriptor.idProduct));
+
+ idev->name = sz->name;
+ usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
+ strlcat(sz->phys, "/input0", sizeof(sz->phys));
+ idev->phys = sz->phys;
+
+ props->priv = sz;
+ props->driver_type = RC_DRIVER_IR_RAW;
+ props->allowed_protos = IR_TYPE_ALL;
+
+ sz->props = props;
+
+ usb_to_input_id(sz->usbdev, &idev->id);
+ idev->dev.parent = sz->dev;
+
+ ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
+ if (ret < 0) {
+ dev_err(dev, "remote input device register failed\n");
+ goto irdev_failed;
+ }
+
+ return idev;
+
+irdev_failed:
+ kfree(props);
+props_alloc_failed:
+ input_free_device(idev);
+idev_alloc_failed:
+ return NULL;
+}
+
+/**
+ * streamzap_probe
+ *
+ * Called by usb-core to associated with a candidate device
+ * On any failure the return value is the ERROR
+ * On success return 0
+ */
+static int __devinit streamzap_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_host_interface *iface_host;
+ struct streamzap_ir *sz = NULL;
+ char buf[63], name[128] = "";
+ int retval = -ENOMEM;
+ int pipe, maxp;
+
+ /* Allocate space for device driver specific data */
+ sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
+ if (!sz)
+ return -ENOMEM;
+
+ sz->usbdev = usbdev;
+ sz->interface = intf;
+
+ /* Check to ensure endpoint information matches requirements */
+ iface_host = intf->cur_altsetting;
+
+ if (iface_host->desc.bNumEndpoints != 1) {
+ dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
+ __func__, iface_host->desc.bNumEndpoints);
+ retval = -ENODEV;
+ goto free_sz;
+ }
+
+ sz->endpoint = &(iface_host->endpoint[0].desc);
+ if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+ != USB_DIR_IN) {
+ dev_err(&intf->dev, "%s: endpoint doesn't match input device "
+ "02%02x\n", __func__, sz->endpoint->bEndpointAddress);
+ retval = -ENODEV;
+ goto free_sz;
+ }
+
+ if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ != USB_ENDPOINT_XFER_INT) {
+ dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
+ "02%02x\n", __func__, sz->endpoint->bmAttributes);
+ retval = -ENODEV;
+ goto free_sz;
+ }
+
+ pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
+
+ if (maxp == 0) {
+ dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
+ __func__);
+ retval = -ENODEV;
+ goto free_sz;
+ }
+
+ /* Allocate the USB buffer and IRQ URB */
+ sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
+ if (!sz->buf_in)
+ goto free_sz;
+
+ sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
+ if (!sz->urb_in)
+ goto free_buf_in;
+
+ sz->dev = &intf->dev;
+ sz->buf_in_len = maxp;
+
+ if (usbdev->descriptor.iManufacturer
+ && usb_string(usbdev, usbdev->descriptor.iManufacturer,
+ buf, sizeof(buf)) > 0)
+ strlcpy(name, buf, sizeof(name));
+
+ if (usbdev->descriptor.iProduct
+ && usb_string(usbdev, usbdev->descriptor.iProduct,
+ buf, sizeof(buf)) > 0)
+ snprintf(name + strlen(name), sizeof(name) - strlen(name),
+ " %s", buf);
+
+ sz->idev = streamzap_init_input_dev(sz);
+ if (!sz->idev)
+ goto input_dev_fail;
+
+ sz->idle = true;
+ sz->decoder_state = PulseSpace;
+ /* FIXME: don't yet have a way to set this */
+ sz->timeout_enabled = true;
+ sz->props->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
+ IR_MAX_DURATION) | 0x03000000);
+ #if 0
+ /* not yet supported, depends on patches from maxim */
+ /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
+ sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
+ sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000;
+ #endif
+
+ do_gettimeofday(&sz->signal_start);
+
+ /* Complete final initialisations */
+ usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
+ maxp, (usb_complete_t)streamzap_callback,
+ sz, sz->endpoint->bInterval);
+ sz->urb_in->transfer_dma = sz->dma_in;
+ sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_set_intfdata(intf, sz);
+
+ if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
+ dev_err(sz->dev, "urb submit failed\n");
+
+ dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
+ usbdev->bus->busnum, usbdev->devnum);
+
+ /* Load the streamzap not-quite-rc5 decoder too */
+ load_rc5_sz_decode();
+
+ return 0;
+
+input_dev_fail:
+ usb_free_urb(sz->urb_in);
+free_buf_in:
+ usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
+free_sz:
+ kfree(sz);
+
+ return retval;
+}
+
+/**
+ * streamzap_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ *
+ * This routine guarantees that the driver will not submit any more urbs
+ * by clearing dev->usbdev. It is also supposed to terminate any currently
+ * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(),
+ * does not provide any way to do this.
+ */
+static void streamzap_disconnect(struct usb_interface *interface)
+{
+ struct streamzap_ir *sz = usb_get_intfdata(interface);
+ struct usb_device *usbdev = interface_to_usbdev(interface);
+
+ usb_set_intfdata(interface, NULL);
+
+ if (!sz)
+ return;
+
+ sz->usbdev = NULL;
+ ir_input_unregister(sz->idev);
+ usb_kill_urb(sz->urb_in);
+ usb_free_urb(sz->urb_in);
+ usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
+
+ kfree(sz);
+}
+
+static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
+{
+ struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+ usb_kill_urb(sz->urb_in);
+
+ return 0;
+}
+
+static int streamzap_resume(struct usb_interface *intf)
+{
+ struct streamzap_ir *sz = usb_get_intfdata(intf);
+
+ if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
+ dev_err(sz->dev, "Error sumbiting urb\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * streamzap_init
+ */
+static int __init streamzap_init(void)
+{
+ int ret;
+
+ /* register this driver with the USB subsystem */
+ ret = usb_register(&streamzap_driver);
+ if (ret < 0)
+ printk(KERN_ERR DRIVER_NAME ": usb register failed, "
+ "result = %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * streamzap_exit
+ */
+static void __exit streamzap_exit(void)
+{
+ usb_deregister(&streamzap_driver);
+}
+
+
+module_init(streamzap_init);
+module_exit(streamzap_exit);
+
+MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging messages");
projects / mirror_ubuntu-focal-kernel.git / commitdiff