Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional"

This reverts commit cfaf76d349837f695c8aa6d7077847fec4231fe5 which was applied
without review due to a bad tool manipulation.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526-revert-bad-binding-v1-1-67329ad1bd80@linaro.org

diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
index 360fea81f4b6f8f6c5d9b43ef62f0b719b62cfd1..9f61ebdfefa85b69814da809542706bbfea8789c 100644 (file)
--- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -70,9 +70,7 @@ properties:
   samsung,burst-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      DSIM high speed burst mode frequency when connected to devices
-      that support burst mode. If absent, the driver will use the pixel
-      clock from the attached device or bridge.
+      DSIM high speed burst mode frequency.
 
   samsung,esc-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -82,8 +80,7 @@ properties:
   samsung,pll-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      DSIM oscillator clock frequency. If absent, the driver will
-      use the clock frequency of sclk_mipi.
+      DSIM oscillator clock frequency.
 
   phys:
     maxItems: 1
@@ -137,7 +134,9 @@ required:
   - compatible
   - interrupts
   - reg
+  - samsung,burst-clock-frequency
   - samsung,esc-clock-frequency
+  - samsung,pll-clock-frequency
 
 allOf:
   - $ref: ../dsi-controller.yaml#