i2c/busses: Move two drivers to embedded section

And fix a typo while we are here

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 87ab0568bb0ed1e18b979b675a5d8db0303ef545..bceafbfa72683698769890bfb664dbe57ea3a010 100644 (file)
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -475,6 +475,26 @@ config I2C_PASEMI
        help
          Supports the PA Semi PWRficient on-chip SMBus interfaces.
 
+config I2C_PCA_PLATFORM
+       tristate "PCA9564/PCA9665 as platform device"
+       select I2C_ALGOPCA
+       default n
+       help
+         This driver supports a memory mapped Philips PCA9564/PCA9665
+         parallel bus to I2C bus controller.
+
+         This driver can also be built as a module.  If so, the module
+         will be called i2c-pca-platform.
+
+config I2C_PMCMSP
+       tristate "PMC MSP I2C TWI Controller"
+       depends on PMC_MSP
+       help
+         This driver supports the PMC TWI controller on MSP devices.
+
+         This driver can also be built as module. If so, the module
+         will be called i2c-pmcmsp.
+
 config I2C_PNX
        tristate "I2C bus support for Philips PNX targets"
        depends on ARCH_PNX4008
@@ -711,26 +731,6 @@ config I2C_PCA_ISA
          delays when I2C/SMBus chip drivers are loaded (e.g. at boot
          time).  If unsure, say N.
 
-config I2C_PCA_PLATFORM
-       tristate "PCA9564/PCA9665 as platform device"
-       select I2C_ALGOPCA
-       default n
-       help
-         This driver supports a memory mapped Philips PCA9564/PCA9665
-         parallel bus to I2C bus controller.
-
-         This driver can also be built as a module.  If so, the module
-         will be called i2c-pca-platform.
-
-config I2C_PMCMSP
-       tristate "PMC MSP I2C TWI Controller"
-       depends on PMC_MSP
-       help
-         This driver supports the PMC TWI controller on MSP devices.
-
-         This driver can also be built as module. If so, the module
-         will be called i2c-pmcmsp.
-
 config I2C_SIBYTE
        tristate "SiByte SMBus interface"
        depends on SIBYTE_SB1xxx_SOC

diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 097236f631e8d68e57a2ca87562912c995f280ca..936880bd1dc58404d4ed666919939729c7c99585 100644 (file)
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_I2C_VIAPRO)      += i2c-viapro.o
 obj-$(CONFIG_I2C_HYDRA)                += i2c-hydra.o
 obj-$(CONFIG_I2C_POWERMAC)     += i2c-powermac.o
 
-# Embebbed system I2C/SMBus host controller drivers
+# Embedded system I2C/SMBus host controller drivers
 obj-$(CONFIG_I2C_AT91)         += i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)       += i2c-au1550.o
 obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
@@ -46,6 +46,8 @@ obj-$(CONFIG_I2C_NOMADIK)     += i2c-nomadik.o
 obj-$(CONFIG_I2C_OCORES)       += i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)         += i2c-omap.o
 obj-$(CONFIG_I2C_PASEMI)       += i2c-pasemi.o
+obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
+obj-$(CONFIG_I2C_PMCMSP)       += i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)          += i2c-pnx.o
 obj-$(CONFIG_I2C_PXA)          += i2c-pxa.o
 obj-$(CONFIG_I2C_S3C2410)      += i2c-s3c2410.o
@@ -68,8 +70,6 @@ obj-$(CONFIG_I2C_TINY_USB)    += i2c-tiny-usb.o
 obj-$(CONFIG_I2C_ACORN)                += i2c-acorn.o
 obj-$(CONFIG_I2C_ELEKTOR)      += i2c-elektor.o
 obj-$(CONFIG_I2C_PCA_ISA)      += i2c-pca-isa.o
-obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o
-obj-$(CONFIG_I2C_PMCMSP)       += i2c-pmcmsp.o
 obj-$(CONFIG_I2C_SIBYTE)       += i2c-sibyte.o
 obj-$(CONFIG_I2C_STUB)         += i2c-stub.o
 obj-$(CONFIG_SCx200_ACB)       += scx200_acb.o