{
u32 i;
PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee);
-#if 0
- if(!pDot11dInfo->bEnabled)
- return;
-#endif
+
// Clear old channel map
memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1);
memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1);
// void (*ps_request_tx_ack) (struct net_device *dev);
void (*enter_sleep_state) (struct net_device *dev, u32 th, u32 tl);
short (*ps_is_queue_empty) (struct net_device *dev);
-#if 0
- /* Typical STA methods */
- int (*handle_auth) (struct net_device * dev,
- struct ieee80211_auth * auth);
- int (*handle_deauth) (struct net_device * dev,
- struct ieee80211_deauth * auth);
- int (*handle_action) (struct net_device * dev,
- struct ieee80211_action * action,
- struct ieee80211_rx_stats * stats);
- int (*handle_disassoc) (struct net_device * dev,
- struct ieee80211_disassoc * assoc);
-#endif
+
int (*handle_beacon) (struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network);
-#if 0
- int (*handle_probe_response) (struct net_device * dev,
- struct ieee80211_probe_response * resp,
- struct ieee80211_network * network);
- int (*handle_probe_request) (struct net_device * dev,
- struct ieee80211_probe_request * req,
- struct ieee80211_rx_stats * stats);
-#endif
int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
-#if 0
- /* Typical AP methods */
- int (*handle_assoc_request) (struct net_device * dev);
- int (*handle_reassoc_request) (struct net_device * dev,
- struct ieee80211_reassoc_request * req);
-#endif
-
/* check whether Tx hw resouce available */
short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
//added by wb for HT related
hdr = (struct ieee80211_hdr_4addr *) skb->data;
-#if 0
-printk("@@ tkey\n");
-printk("%x|", ((u32*)tkey->key)[0]);
-printk("%x|", ((u32*)tkey->key)[1]);
-printk("%x|", ((u32*)tkey->key)[2]);
-printk("%x|", ((u32*)tkey->key)[3]);
-printk("%x|", ((u32*)tkey->key)[4]);
-printk("%x|", ((u32*)tkey->key)[5]);
-printk("%x|", ((u32*)tkey->key)[6]);
-printk("%x\n", ((u32*)tkey->key)[7]);
-#endif
-
if (!tcb_desc->bHwSec)
{
if (!tkey->tx_phase1_done) {
HTUpdateDefaultSetting(ieee);
HTInitializeHTInfo(ieee); //may move to other place.
TSInitialize(ieee);
-#if 0
- INIT_WORK(&ieee->ht_onAssRsp, (void(*)(void*)) HTOnAssocRsp_wq);
-#endif
+
for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++)
INIT_LIST_HEAD(&ieee->ibss_mac_hash[i]);
}
ieee80211_networks_free(ieee);
-#if 0
- for (i = 0; i < IEEE_IBSS_MAC_HASH_SIZE; i++) {
- list_for_each_safe(p, q, &ieee->ibss_mac_hash[i]) {
- kfree(list_entry(p, struct ieee_ibss_seq, list));
- list_del(p);
- }
- }
-
-#endif
free_netdev(dev);
}
u8 index = 0;
bool bMatchWinStart = false, bPktInBuf = false;
IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): Seq is %d,pTS->RxIndicateSeq is %d, WinSize is %d\n",__FUNCTION__,SeqNum,pTS->RxIndicateSeq,WinSize);
-#if 0
- if(!list_empty(&ieee->RxReorder_Unused_List))
- IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): ieee->RxReorder_Unused_List is nut NULL\n");
-#endif
/* Rx Reorder initialize condition.*/
if(pTS->RxIndicateSeq == 0xffff) {
pTS->RxIndicateSeq = SeqNum;
// Set new pending timer.
IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): SET rx timeout timer\n", __FUNCTION__);
pTS->RxTimeoutIndicateSeq = pTS->RxIndicateSeq;
-#if 0
- if(timer_pending(&pTS->RxPktPendingTimer))
- del_timer_sync(&pTS->RxPktPendingTimer);
- pTS->RxPktPendingTimer.expires = jiffies + MSECS(pHTInfo->RxReorderPendingTime);
- add_timer(&pTS->RxPktPendingTimer);
-#else
mod_timer(&pTS->RxPktPendingTimer, jiffies + MSECS(pHTInfo->RxReorderPendingTime));
-#endif
}
#endif
}
nSubframe_Length = (nSubframe_Length>>8) + (nSubframe_Length<<8);
if(skb->len<(ETHERNET_HEADER_SIZE + nSubframe_Length)) {
-#if 0//cosa
- RT_ASSERT(
- (nRemain_Length>=(ETHERNET_HEADER_SIZE + nSubframe_Length)),
- ("ParseSubframe(): A-MSDU subframe parse error!! Subframe Length: %d\n", nSubframe_Length) );
-#endif
printk("%s: A-MSDU parse error!! pRfd->nTotalSubframe : %d\n",\
__FUNCTION__,rxb->nr_subframes);
printk("%s: A-MSDU parse error!! Subframe Length: %d\n",__FUNCTION__, nSubframe_Length);
else
{
PRX_TS_RECORD pRxTS = NULL;
- #if 0
- struct ieee80211_hdr_3addr *hdr;
- u16 fc;
- hdr = (struct ieee80211_hdr_3addr *)skb->data;
- fc = le16_to_cpu(hdr->frame_ctl);
- u8 tmp = (fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS);
-
- u8 tid = (*((u8*)skb->data + (((fc& IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))?30:24)))&0xf;
- printk("====================>fc:%x, tid:%d, tmp:%d\n", fc, tid, tmp);
- //u8 tid = (u8)((frameqos*)(buf + ((fc & IEEE80211_FCTL_TODS)&&(fc & IEEE80211_FCTL_FROMDS))? 30 : 24))->field.tid;
- #endif
//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): QOS ENABLE AND RECEIVE QOS DATA , we will get Ts, tid:%d\n",__FUNCTION__, tid);
#if 1
if(GetTs(
#endif
if (type == IEEE80211_FTYPE_MGMT) {
- #if 0
- if ( stype == IEEE80211_STYPE_AUTH &&
- fc & IEEE80211_FCTL_WEP && ieee->host_decrypt &&
- (keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0)
- {
- printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
- "from " MAC_FMT "\n", dev->name,
- MAC_ARG(hdr->addr2));
- /* TODO: could inform hostapd about this so that it
- * could send auth failure report */
- goto rx_dropped;
- }
- #endif
-
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
if (ieee80211_rx_frame_mgmt(ieee, skb, rx_stats, type, stype))
goto rx_dropped;
network->dtim_period = info_element->data[1];
if(ieee->state != IEEE80211_LINKED)
break;
-#if 0
- network->last_dtim_sta_time[0] = stats->mac_time[0];
-#else
//we use jiffies for legacy Power save
network->last_dtim_sta_time[0] = jiffies;
-#endif
network->last_dtim_sta_time[1] = stats->mac_time[1];
network->dtim_data = IEEE80211_DTIM_VALID;
}
}
-#if 0
- if (tmp_htcap_len !=0)
- {
- u16 cap_ext = ((PHT_CAPABILITY_ELE)&info_element->data[0])->ExtHTCapInfo;
- if ((cap_ext & 0x0c00) == 0x0c00)
- {
- network->ralink_cap_exist = true;
- }
- }
-#endif
if(info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x0c &&
//printk("=====>Receive <%s> Country IE\n",network->ssid);
ieee80211_extract_country_ie(ieee, info_element, network, network->bssid);//addr2 is same as addr3 when from an AP
break;
-/* TODO */
-#if 0
- /* 802.11h */
- case MFIE_TYPE_POWER_CONSTRAINT:
- network->power_constraint = info_element->data[0];
- network->flags |= NETWORK_HAS_POWER_CONSTRAINT;
- break;
-
- case MFIE_TYPE_CSA:
- network->power_constraint = info_element->data[0];
- network->flags |= NETWORK_HAS_CSA;
- break;
-
- case MFIE_TYPE_QUIET:
- network->quiet.count = info_element->data[0];
- network->quiet.period = info_element->data[1];
- network->quiet.duration = info_element->data[2];
- network->quiet.offset = info_element->data[3];
- network->flags |= NETWORK_HAS_QUIET;
- break;
-
- case MFIE_TYPE_IBSS_DFS:
- if (network->ibss_dfs)
- break;
- network->ibss_dfs = kmemdup(info_element->data,
- info_element->len,
- GFP_ATOMIC);
- if (!network->ibss_dfs)
- return 1;
- network->flags |= NETWORK_HAS_IBSS_DFS;
- break;
-
- case MFIE_TYPE_TPC_REPORT:
- network->tpc_report.transmit_power =
- info_element->data[0];
- network->tpc_report.link_margin = info_element->data[1];
- network->flags |= NETWORK_HAS_TPC_REPORT;
- break;
-#endif
default:
IEEE80211_DEBUG_MGMT
("Unsupported info element: %s (%d)\n",
cpu_to_le16((beacon_buf->capability |= WLAN_CAPABILITY_SHORT_SLOT));
crypt = ieee->crypt[ieee->tx_keyidx];
-#if 0
- encrypt = ieee->host_encrypt && crypt && crypt->ops &&
- (0 == strcmp(crypt->ops->name, "WEP"));
-#endif
+
if (encrypt)
beacon_buf->capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY);
*(tag++) = 1;
*(tag++) = erpinfo_content;
}
-#if 0
- //Include High Throuput capability
- *(tag++) = MFIE_TYPE_HT_CAP;
- *(tag++) = tmp_ht_cap_len - 2;
- memcpy(tag, tmp_ht_cap_buf, tmp_ht_cap_len - 2);
- tag += tmp_ht_cap_len - 2;
-#endif
if(rate_ex_len){
*(tag++) = MFIE_TYPE_RATES_EX;
*(tag++) = rate_ex_len-2;
tag+=rate_ex_len-2;
}
-#if 0
- //Include High Throuput info
-
- *(tag++) = MFIE_TYPE_HT_INFO;
- *(tag++) = tmp_ht_info_len - 2;
- memcpy(tag, tmp_ht_info_buf, tmp_ht_info_len -2);
- tag += tmp_ht_info_len - 2;
-#endif
if (wpa_ie_len)
{
if (ieee->iw_mode == IW_MODE_ADHOC)
tag += wpa_ie_len;
}
-#if 0
- //
- // Construct Realtek Proprietary Aggregation mode (Set AMPDU Factor to 2, 32k)
- //
- if(pHTInfo->bRegRT2RTAggregation)
- {
- (*tag++) = 0xdd;
- (*tag++) = tmp_generic_ie_len - 2;
- memcpy(tag,tmp_generic_ie_buf,tmp_generic_ie_len -2);
- tag += tmp_generic_ie_len -2;
-
- }
-#endif
-#if 0
- if(ieee->qos_support)
- {
- (*tag++) = 0xdd;
- (*tag++) = wmm_len;
- memcpy(tag,QosOui,wmm_len);
- tag += wmm_len;
- }
-#endif
//skb->dev = ieee->dev;
return skb;
}
softmac_mgmt_xmit(skb, ieee);
mod_timer(&ieee->associate_timer, jiffies + (HZ/2));
-#if 0
- ieee->associate_timer.expires = jiffies + (HZ / 2);
- add_timer(&ieee->associate_timer);
-#endif
//dev_kfree_skb_any(skb);//edit by thomas
}
kfree(challenge);
else{
softmac_mgmt_xmit(skb, ieee);
mod_timer(&ieee->associate_timer, jiffies + (HZ/2));
-#if 0
- ieee->associate_timer.expires = jiffies + (HZ / 2);
- add_timer(&ieee->associate_timer);
-#endif
//dev_kfree_skb_any(skb);//edit by thomas
}
}
// struct net_device* dev = ieee->dev;
del_timer_sync(&ieee->associate_timer);
-#if 0
- for(i = 0; i < 6; i++) {
- ieee->seq_ctrl[i] = 0;
- }
-#endif
ieee->state = IEEE80211_LINKED;
-#if 0
- if (ieee->pHTInfo->bCurrentHTSupport)
- {
- printk("Successfully associated, ht enabled\n");
- queue_work(ieee->wq, &ieee->ht_onAssRsp);
- }
- else
- {
- printk("Successfully associated, ht not enabled\n");
- memset(ieee->dot11HTOperationalRateSet, 0, 16);
- HTSetConnectBwMode(ieee, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
- }
-#endif
//ieee->UpdateHalRATRTableHandler(dev, ieee->dot11HTOperationalRateSet);
queue_work(ieee->wq, &ieee->associate_complete_wq);
}
printk(KERN_INFO"New client associated: "MAC_FMT"\n", MAC_ARG(dest));
//FIXME
- #if 0
- spin_lock_irqsave(&ieee->lock,flags);
- add_associate(ieee,dest);
- spin_unlock_irqrestore(&ieee->lock,flags);
- #endif
}
if(!ieee->proto_started)
return 0;
-#if 0
- printk("%d, %d, %d, %d\n", ieee->sta_sleep, ieee->ps, ieee->iw_mode, ieee->state);
- if(ieee->sta_sleep || (ieee->ps != IEEE80211_PS_DISABLED &&
- ieee->iw_mode == IW_MODE_INFRA &&
- ieee->state == IEEE80211_LINKED))
-
- tasklet_schedule(&ieee->ps_task);
-
- if(WLAN_FC_GET_STYPE(header->frame_ctl) != IEEE80211_STYPE_PROBE_RESP &&
- WLAN_FC_GET_STYPE(header->frame_ctl) != IEEE80211_STYPE_BEACON)
- ieee->last_rx_ps_time = jiffies;
-#endif
switch (WLAN_FC_GET_STYPE(header->frame_ctl)) {
len = ((wrqu->essid.length-1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length-1) : IW_ESSID_MAX_SIZE;
strncpy(ieee->current_network.ssid, extra, len+1);
ieee->current_network.ssid_len = len+1;
-#if 0
- {
- int i;
- for (i=0; i<len + 1; i++)
- printk("%c ", extra[i]);
- printk("\n");
- }
-#endif
ieee->ssid_set = 1;
}
else{
//int i;
if (unlikely(!txb))
return;
-#if 0
- for (i = 0; i < txb->nr_frags; i++)
- if (txb->fragments[i])
- dev_kfree_skb_any(txb->fragments[i]);
-#endif
kfree(txb);
}
#include <linux/module.h>
#include "ieee80211.h"
-#if 0
-static const char *ieee80211_modes[] = {
- "?", "a", "b", "ab", "g", "ag", "bg", "abg"
-};
-#endif
+
struct modes_unit {
char *mode_string;
int mode_size;
if (rate > max_rate)
max_rate = rate;
}
-#if 0
- printk("max rate:%d ===basic rate:\n", max_rate);
- for (i=0;i<network->rates_len;i++)
- printk(" %x", network->rates[i]);
- printk("\n=======extend rate\n");
- for (i=0; i<network->rates_ex_len; i++)
- printk(" %x", network->rates_ex[i]);
- printk("\n");
-#endif
+
iwe.cmd = SIOCGIWRATE;
iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
iwe.u.bitrate.value = max_rate * 500000;
erq->flags |= IW_ENCODE_DISABLED;
return 0;
}
-#if 0
- if (strcmp(crypt->ops->name, "WEP") != 0) {
- /* only WEP is supported with wireless extensions, so just
- * report that encryption is used */
- erq->length = 0;
- erq->flags |= IW_ENCODE_ENABLED;
- return 0;
- }
-#endif
+
len = crypt->ops->get_key(keybuf, SCM_KEY_LEN, NULL, crypt->priv);
erq->length = (len >= 0 ? len : 0);
sec.enabled = 1;
// sec.encrypt = 1;
-#if 0
- if (group_key ? !ieee->host_mc_decrypt :
- !(ieee->host_encrypt || ieee->host_decrypt ||
- ieee->host_encrypt_msdu))
- goto skip_host_crypt;
-#endif
+
switch (ext->alg) {
case IW_ENCODE_ALG_WEP:
alg = "WEP";
#if 1
int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
{
-#if 0
- printk("====>%s()\n", __FUNCTION__);
- {
- int i;
- for (i=0; i<len; i++)
- printk("%2x ", ie[i]&0xff);
- printk("\n");
- }
-#endif
u8 *buf;
if (len>MAX_WPA_IE_LEN || (len && ie == NULL))
//return NULL;
}
-#if 0 //I try to merge ADDBA_REQ and ADDBA_RSP frames together..
-/********************************************************************************************************************
- *function: construct ADDBAREQ frame
- * input: u8* dst //ADDBARsp frame's destination
- * PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA_RSP.
- * u16 StatusCode //status code.
- * output: none
- * return: sk_buff* skb //return constructed skb to xmit
-********************************************************************************************************************/
-static struct sk_buff* ieee80211_ADDBA_Rsp( IN struct ieee80211_device* ieee, u8* dst, PBA_RECORD pBA, u16 StatusCode)
-{
- OCTET_STRING osADDBAFrame, tmp;
-
- FillOctetString(osADDBAFrame, Buffer, 0);
- *pLength = 0;
-
- ConstructMaFrameHdr(
- Adapter,
- Addr,
- ACT_CAT_BA,
- ACT_ADDBARSP,
- &osADDBAFrame );
-
- // Dialog Token
- FillOctetString(tmp, &pBA->DialogToken, 1);
- PacketAppendData(&osADDBAFrame, tmp);
-
- // Status Code
- FillOctetString(tmp, &StatusCode, 2);
- PacketAppendData(&osADDBAFrame, tmp);
-
- // BA Parameter Set
- FillOctetString(tmp, &pBA->BaParamSet, 2);
- PacketAppendData(&osADDBAFrame, tmp);
-
- // BA Timeout Value
- FillOctetString(tmp, &pBA->BaTimeoutValue, 2);
- PacketAppendData(&osADDBAFrame, tmp);
-
- *pLength = osADDBAFrame.Length;
-}
-#endif
-
/********************************************************************************************************************
*function: construct DELBA frame
* input: u8* dst //DELBA frame's destination
{
bool retValue = false;
struct ieee80211_network* net = &ieee->current_network;
-#if 0
- if(pMgntInfo->bHalfNMode == false)
- retValue = false;
- else
-#endif
+
if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
(memcmp(net->bssid, PCI_RALINK, 3)==0) ||
u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr)
{
u8 ret = 0;
-#if 0
- // Apply for 819u only
-#if (HAL_CODE_BASE==RTL8192 && DEV_BUS_TYPE==USB_INTERFACE)
- if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
- (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)
- )
- {
- ret = 1;
- }
-
- if(pHTInfo->bCurrentRT2RTAggregation)
- {
- // The parameter of pHTInfo->bCurrentRT2RTAggregation must be decided previously
- ret = 1;
- }
-#endif
-#endif
return ret;
}
// Set specific EDCA parameter for different AP in DM handler.
return retValue;
-#if 0
- if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0)||
- (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
- (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(PeerMacAddr, NETGEAR834Bv2_BROADCOM, 3)==0))
-
- {
- retValue = 1; //Linksys disable EDCA turbo mode
- }
-
- return retValue;
-#endif
}
/********************************************************************************************************************
return true;
}
void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset);
-#if 0
-//I need move this function to other places, such as rx?
-void HTOnAssocRsp_wq(struct work_struct *work)
-{
- struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, ht_onAssRsp);
-#endif
+
void HTOnAssocRsp(struct ieee80211_device *ieee)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
{
// Set MPDU density to 2 to Realtek AP, and set it to 0 for others
// Replace MPDU factor declared in original association response frame format. 2007.08.20 by Emily
-#if 0
- osTmp= PacketGetElement( asocpdu, EID_Vendor, OUI_SUB_REALTEK_AGG, OUI_SUBTYPE_DONT_CARE);
- if(osTmp.Length >= 5) //00:e0:4c:02:00
-#endif
if (ieee->current_network.bssht.bdRT2RTAggregation)
{
if( ieee->pairwise_key_type != KEY_TYPE_NA)
pBssHT->bdRT2RTLongSlotTime = false;
pBssHT->RT2RT_HT_Mode = (RT_HT_CAPBILITY)0;
}
-#if 0
-//below function has merged into ieee80211_network_init() in ieee80211_rx.c
-void
-HTParsingHTCapElement(
- IN PADAPTER Adapter,
- IN OCTET_STRING HTCapIE,
- OUT PRT_WLAN_BSS pBssDesc
-)
-{
- PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
-
- if( HTCapIE.Length > sizeof(pBssDesc->BssHT.bdHTCapBuf) )
- {
- RT_TRACE( COMP_HT, DBG_LOUD, ("HTParsingHTCapElement(): HT Capability Element length is too long!\n") );
- return;
- }
-
- // TODO: Check the correctness of HT Cap
- //Print each field in detail. Driver should not print out this message by default
- if(!pMgntInfo->mActingAsAp && !pMgntInfo->mAssoc)
- HTDebugHTCapability(DBG_TRACE, Adapter, &HTCapIE, (pu8)"HTParsingHTCapElement()");
-
- HTCapIE.Length = HTCapIE.Length > sizeof(pBssDesc->BssHT.bdHTCapBuf)?\
- sizeof(pBssDesc->BssHT.bdHTCapBuf):HTCapIE.Length; //prevent from overflow
-
- CopyMem(pBssDesc->BssHT.bdHTCapBuf, HTCapIE.Octet, HTCapIE.Length);
- pBssDesc->BssHT.bdHTCapLen = HTCapIE.Length;
-
-}
-
-void
-HTParsingHTInfoElement(
- PADAPTER Adapter,
- OCTET_STRING HTInfoIE,
- PRT_WLAN_BSS pBssDesc
-)
-{
- PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
-
- if( HTInfoIE.Length > sizeof(pBssDesc->BssHT.bdHTInfoBuf))
- {
- RT_TRACE( COMP_HT, DBG_LOUD, ("HTParsingHTInfoElement(): HT Information Element length is too long!\n") );
- return;
- }
-
- // TODO: Check the correctness of HT Info
- //Print each field in detail. Driver should not print out this message by default
- if(!pMgntInfo->mActingAsAp && !pMgntInfo->mAssoc)
- HTDebugHTInfo(DBG_TRACE, Adapter, &HTInfoIE, (pu8)"HTParsingHTInfoElement()");
-
- HTInfoIE.Length = HTInfoIE.Length > sizeof(pBssDesc->BssHT.bdHTInfoBuf)?\
- sizeof(pBssDesc->BssHT.bdHTInfoBuf):HTInfoIE.Length; //prevent from overflow
-
- CopyMem( pBssDesc->BssHT.bdHTInfoBuf, HTInfoIE.Octet, HTInfoIE.Length);
- pBssDesc->BssHT.bdHTInfoLen = HTInfoIE.Length;
-}
-
-/*
- * Get HT related information from beacon and save it in BssDesc
- *
- * (1) Parse HTCap, and HTInfo, and record whether it is 11n AP
- * (2) If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
- * (3) Check whether peer is Realtek AP (for Realtek proprietary aggregation mode).
- * Input:
- * PADAPTER Adapter
- *
- * Output:
- * PRT_TCB BssDesc
- *
-*/
-void HTGetValueFromBeaconOrProbeRsp(
- PADAPTER Adapter,
- POCTET_STRING pSRCmmpdu,
- PRT_WLAN_BSS bssDesc
-)
-{
- PMGNT_INFO pMgntInfo = &Adapter->MgntInfo;
- PRT_HIGH_THROUGHPUT pHTInfo = GET_HT_INFO(pMgntInfo);
- OCTET_STRING HTCapIE, HTInfoIE, HTRealtekAgg, mmpdu;
- OCTET_STRING BroadcomElement, CiscoElement;
-
- mmpdu.Octet = pSRCmmpdu->Octet;
- mmpdu.Length = pSRCmmpdu->Length;
-
- //2Note:
- // Mark for IOT testing using Linksys WRT350N, This AP does not contain WMM IE when
- // it is configured at pure-N mode.
- // if(bssDesc->BssQos.bdQoSMode & QOS_WMM)
- //
-
- HTInitializeBssDesc (&bssDesc->BssHT);
-
- //2<1> Parse HTCap, and HTInfo
- // Get HT Capability IE: (1) Get IEEE Draft N IE or (2) Get EWC IE
- HTCapIE = PacketGetElement(mmpdu, EID_HTCapability, OUI_SUB_DONT_CARE, OUI_SUBTYPE_DONT_CARE);
- if(HTCapIE.Length == 0)
- {
- HTCapIE = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_11N_EWC_HT_CAP, OUI_SUBTYPE_DONT_CARE);
- if(HTCapIE.Length != 0)
- bssDesc->BssHT.bdHTSpecVer= HT_SPEC_VER_EWC;
- }
- if(HTCapIE.Length != 0)
- HTParsingHTCapElement(Adapter, HTCapIE, bssDesc);
-
- // Get HT Information IE: (1) Get IEEE Draft N IE or (2) Get EWC IE
- HTInfoIE = PacketGetElement(mmpdu, EID_HTInfo, OUI_SUB_DONT_CARE, OUI_SUBTYPE_DONT_CARE);
- if(HTInfoIE.Length == 0)
- {
- HTInfoIE = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_11N_EWC_HT_INFO, OUI_SUBTYPE_DONT_CARE);
- if(HTInfoIE.Length != 0)
- bssDesc->BssHT.bdHTSpecVer = HT_SPEC_VER_EWC;
- }
- if(HTInfoIE.Length != 0)
- HTParsingHTInfoElement(Adapter, HTInfoIE, bssDesc);
-
- //2<2>If peer is HT, but not WMM, call QosSetLegacyWMMParamWithHT()
- if(HTCapIE.Length != 0)
- {
- bssDesc->BssHT.bdSupportHT = true;
- if(bssDesc->BssQos.bdQoSMode == QOS_DISABLE)
- QosSetLegacyWMMParamWithHT(Adapter, bssDesc);
- }
- else
- {
- bssDesc->BssHT.bdSupportHT = false;
- }
-
- //2<3>Check whether the peer is Realtek AP/STA
- if(pHTInfo->bRegRT2RTAggregation)
- {
- if(bssDesc->BssHT.bdSupportHT)
- {
- HTRealtekAgg = PacketGetElement(mmpdu, EID_Vendor, OUI_SUB_REALTEK_AGG, OUI_SUBTYPE_DONT_CARE);
- if(HTRealtekAgg.Length >=5 )
- {
- bssDesc->BssHT.bdRT2RTAggregation = true;
-
- if((HTRealtekAgg.Octet[4]==1) && (HTRealtekAgg.Octet[5] & 0x02))
- bssDesc->BssHT.bdRT2RTLongSlotTime = true;
- }
- }
- }
-
- //
- // 2008/01/25 MH Get Broadcom AP IE for manamgent frame CCK rate problem.
- // AP can not receive CCK managemtn from from 92E.
- //
-
- // Initialize every new bss broadcom cap exist as false..
- bssDesc->bBroadcomCapExist= false;
-
- if(HTCapIE.Length != 0 || HTInfoIE.Length != 0)
- {
- u4Byte Length = 0;
-
- FillOctetString(BroadcomElement, NULL, 0);
-
- BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_1, OUI_SUBTYPE_DONT_CARE);
- Length += BroadcomElement.Length;
- BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_2, OUI_SUBTYPE_DONT_CARE);
- Length += BroadcomElement.Length;
- BroadcomElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_BROADCOM_IE_3, OUI_SUBTYPE_DONT_CARE);
- Length += BroadcomElement.Length;
-
- if(Length > 0)
- bssDesc->bBroadcomCapExist = true;
- }
-
-
- // For Cisco IOT issue
- CiscoElement = PacketGetElement( mmpdu, EID_Vendor, OUI_SUB_CISCO_IE, OUI_SUBTYPE_DONT_CARE);
- if(CiscoElement.Length != 0){ // 3: 0x00, 0x40, 0x96 ....
- bssDesc->bCiscoCapExist = true;
- }else{
- bssDesc->bCiscoCapExist = false;
- }
-}
-
-
-#endif
/********************************************************************************************************************
*function: initialize Bss HT structure(struct PBSS_HT)
* input: struct ieee80211_device *ieee
}ACK_POLICY,*PACK_POLICY;
#define WMM_PARAM_ELEMENT_SIZE (8+(4*AC_PARAM_SIZE))
-#if 0
-#define GET_QOS_CTRL(_pStart) ReadEF2Byte((u8 *)(_pStart) + 24)
-#define SET_QOS_CTRL(_pStart, _value) WriteEF2Byte((u8 *)(_pStart) + 24, _value)
-
-// WMM control field.
-#define GET_QOS_CTRL_WMM_UP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 3))
-#define SET_QOS_CTRL_WMM_UP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 3, (u8)(_value))
-
-#define GET_QOS_CTRL_WMM_EOSP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
-#define SET_QOS_CTRL_WMM_EOSP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
-
-#define GET_QOS_CTRL_WMM_ACK_POLICY(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
-#define SET_QOS_CTRL_WMM_ACK_POLICY(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
-
-// 802.11e control field (by STA, data)
-#define GET_QOS_CTRL_STA_DATA_TID(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
-#define SET_QOS_CTRL_STA_DATA_TID(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
-
-#define GET_QOS_CTRL_STA_DATA_QSIZE_FLAG(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
-#define SET_QOS_CTRL_STA_DATA_QSIZE_FLAG(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
-
-#define GET_QOS_CTRL_STA_DATA_ACK_POLICY(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
-#define SET_QOS_CTRL_STA_DATA_ACK_POLICY(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
-
-#define GET_QOS_CTRL_STA_DATA_TXOP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
-#define SET_QOS_CTRL_STA_DATA_TXOP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
-
-#define GET_QOS_CTRL_STA_DATA_QSIZE(_pStart) GET_QOS_CTRL_STA_DATA_TXOP(_pStart)
-#define SET_QOS_CTRL_STA_DATA_QSIZE(_pStart, _value) SET_QOS_CTRL_STA_DATA_TXOP(_pStart)
-
-// 802.11e control field (by HC, data)
-#define GET_QOS_CTRL_HC_DATA_TID(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
-#define SET_QOS_CTRL_HC_DATA_TID(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_DATA_EOSP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
-#define SET_QOS_CTRL_HC_DATA_EOSP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_DATA_ACK_POLICY(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
-#define SET_QOS_CTRL_HC_DATA_ACK_POLICY(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_DATA_PS_BUFSTATE(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
-#define SET_QOS_CTRL_HC_DATA_PS_BUFSTATE(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
-
-// 802.11e control field (by HC, CFP)
-#define GET_QOS_CTRL_HC_CFP_TID(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 0, 4))
-#define SET_QOS_CTRL_HC_CFP_TID(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 0, 4, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_CFP_EOSP(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 4, 1))
-#define SET_QOS_CTRL_HC_CFP_EOSP(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 4, 1, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_CFP_ACK_POLICY(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 5, 2))
-#define SET_QOS_CTRL_HC_CFP_ACK_POLICY(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 5, 2, (u8)(_value))
-
-#define GET_QOS_CTRL_HC_CFP_TXOP_LIMIT(_pStart) ((u8)LE_BITS_TO_2BYTE((u8 *)(_pStart)+24, 8, 8))
-#define SET_QOS_CTRL_HC_CFP_TXOP_LIMIT(_pStart, _value) SET_BITS_TO_LE_2BYTE((u8 *)(_pStart)+24, 8, 8, (u8)(_value))
-
-#define SET_WMM_QOS_INFO_FIELD(_pStart, _val) WriteEF1Byte(_pStart, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_PARAMETERSET_COUNT(_pStart) LE_BITS_TO_1BYTE(_pStart, 0, 4)
-#define SET_WMM_QOS_INFO_FIELD_PARAMETERSET_COUNT(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 0, 4, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_AP_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 7, 1)
-#define SET_WMM_QOS_INFO_FIELD_AP_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 7, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_AC_VO_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 0, 1)
-#define SET_WMM_QOS_INFO_FIELD_STA_AC_VO_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 0, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_AC_VI_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 1, 1)
-#define SET_WMM_QOS_INFO_FIELD_STA_AC_VI_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 1, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_AC_BE_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 2, 1)
-#define SET_WMM_QOS_INFO_FIELD_STA_AC_BE_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 2, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_AC_BK_UAPSD(_pStart) LE_BITS_TO_1BYTE(_pStart, 3, 1)
-#define SET_WMM_QOS_INFO_FIELD_STA_AC_BK_UAPSD(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 3, 1, _val)
-
-#define GET_WMM_QOS_INFO_FIELD_STA_MAX_SP_LEN(_pStart) LE_BITS_TO_1BYTE(_pStart, 5, 2)
-#define SET_WMM_QOS_INFO_FIELD_STA_MAX_SP_LEN(_pStart, _val) SET_BITS_TO_LE_1BYTE(_pStart, 5, 2, _val)
-
-
-#define WMM_INFO_ELEMENT_SIZE 7
-
-#define GET_WMM_INFO_ELE_OUI(_pStart) ((u8 *)(_pStart))
-#define SET_WMM_INFO_ELE_OUI(_pStart, _pVal) PlatformMoveMemory(_pStart, _pVal, 3);
-
-#define GET_WMM_INFO_ELE_OUI_TYPE(_pStart) ( EF1Byte( *((u8 *)(_pStart)+3) ) )
-#define SET_WMM_INFO_ELE_OUI_TYPE(_pStart, _val) ( *((u8 *)(_pStart)+3) = EF1Byte(_val) )
-
-#define GET_WMM_INFO_ELE_OUI_SUBTYPE(_pStart) ( EF1Byte( *((u8 *)(_pStart)+4) ) )
-#define SET_WMM_INFO_ELE_OUI_SUBTYPE(_pStart, _val) ( *((u8 *)(_pStart)+4) = EF1Byte(_val) )
-
-#define GET_WMM_INFO_ELE_VERSION(_pStart) ( EF1Byte( *((u8 *)(_pStart)+5) ) )
-#define SET_WMM_INFO_ELE_VERSION(_pStart, _val) ( *((u8 *)(_pStart)+5) = EF1Byte(_val) )
-
-#define GET_WMM_INFO_ELE_QOS_INFO_FIELD(_pStart) ( EF1Byte( *((u8 *)(_pStart)+6) ) )
-#define SET_WMM_INFO_ELE_QOS_INFO_FIELD(_pStart, _val) ( *((u8 *)(_pStart)+6) = EF1Byte(_val) )
-
-
-
-#define GET_WMM_AC_PARAM_AIFSN(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 0, 4) )
-#define SET_WMM_AC_PARAM_AIFSN(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 0, 4, _val)
-
-#define GET_WMM_AC_PARAM_ACM(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 4, 1) )
-#define SET_WMM_AC_PARAM_ACM(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 4, 1, _val)
-
-#define GET_WMM_AC_PARAM_ACI(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 5, 2) )
-#define SET_WMM_AC_PARAM_ACI(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 5, 2, _val)
-
-#define GET_WMM_AC_PARAM_ACI_AIFSN(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 0, 8) )
-#define SET_WMM_AC_PARAM_ACI_AIFSN(_pStart, _val) SET_BTIS_TO_LE_4BYTE(_pStart, 0, 8, _val)
-
-#define GET_WMM_AC_PARAM_ECWMIN(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 8, 4) )
-#define SET_WMM_AC_PARAM_ECWMIN(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 8, 4, _val)
-
-#define GET_WMM_AC_PARAM_ECWMAX(_pStart) ( (u8)LE_BITS_TO_4BYTE(_pStart, 12, 4) )
-#define SET_WMM_AC_PARAM_ECWMAX(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 12, 4, _val)
-
-#define GET_WMM_AC_PARAM_TXOP_LIMIT(_pStart) ( (u16)LE_BITS_TO_4BYTE(_pStart, 16, 16) )
-#define SET_WMM_AC_PARAM_TXOP_LIMIT(_pStart, _val) SET_BITS_TO_LE_4BYTE(_pStart, 16, 16, _val)
-
-
-
-
-#define GET_WMM_PARAM_ELE_OUI(_pStart) ((u8 *)(_pStart))
-#define SET_WMM_PARAM_ELE_OUI(_pStart, _pVal) PlatformMoveMemory(_pStart, _pVal, 3)
-
-#define GET_WMM_PARAM_ELE_OUI_TYPE(_pStart) ( EF1Byte( *((u8 *)(_pStart)+3) ) )
-#define SET_WMM_PARAM_ELE_OUI_TYPE(_pStart, _val) ( *((u8 *)(_pStart)+3) = EF1Byte(_val) )
-
-#define GET_WMM_PARAM_ELE_OUI_SUBTYPE(_pStart) ( EF1Byte( *((u8 *)(_pStart)+4) ) )
-#define SET_WMM_PARAM_ELE_OUI_SUBTYPE(_pStart, _val) ( *((u8 *)(_pStart)+4) = EF1Byte(_val) )
-
-#define GET_WMM_PARAM_ELE_VERSION(_pStart) ( EF1Byte( *((u8 *)(_pStart)+5) ) )
-#define SET_WMM_PARAM_ELE_VERSION(_pStart, _val) ( *((u8 *)(_pStart)+5) = EF1Byte(_val) )
-
-#define GET_WMM_PARAM_ELE_QOS_INFO_FIELD(_pStart) ( EF1Byte( *((u8 *)(_pStart)+6) ) )
-#define SET_WMM_PARAM_ELE_QOS_INFO_FIELD(_pStart, _val) ( *((u8 *)(_pStart)+6) = EF1Byte(_val) )
-
-#define GET_WMM_PARAM_ELE_AC_PARAM(_pStart) ( (u8 *)(_pStart)+8 )
-#define SET_WMM_PARAM_ELE_AC_PARAM(_pStart, _pVal) PlatformMoveMemory((_pStart)+8, _pVal, 16)
-#endif
//
// QoS Control Field
}QOS_INFO_FIELD, *PQOS_INFO_FIELD;
-#if 0
-//
-// WMM Information Element
-// Ref: WMM spec 2.2.1: WME Information Element, p.10.
-//
-typedef struct _WMM_INFO_ELEMENT{
-// u8 ElementID;
-// u8 Length;
- u8 OUI[3];
- u8 OUI_Type;
- u8 OUI_SubType;
- u8 Version;
- QOS_INFO_FIELD QosInfo;
-}WMM_INFO_ELEMENT, *PWMM_INFO_ELEMENT;
-#endif
-
//
// ACI to AC coding.
// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
u8 *Octet;
u16 Length;
}OCTET_STRING, *POCTET_STRING;
-#if 0
-#define FillOctetString(_os,_octet,_len) \
- (_os).Octet=(u8 *)(_octet); \
- (_os).Length=(_len);
-
-#define WMM_ELEM_HDR_LEN 6
-#define WMMElemSkipHdr(_osWMMElem) \
- (_osWMMElem).Octet += WMM_ELEM_HDR_LEN; \
- (_osWMMElem).Length -= WMM_ELEM_HDR_LEN;
-#endif
+
//
// STA QoS data.
// Ref: DOT11_QOS in 8185 code. [def. in QoS_mp.h]
if(bPktInBuf && (pRxTs->RxTimeoutIndicateSeq==0xffff))
{
pRxTs->RxTimeoutIndicateSeq = pRxTs->RxIndicateSeq;
-#if 0
- if(timer_pending(&pTS->RxPktPendingTimer))
- del_timer_sync(&pTS->RxPktPendingTimer);
- pTS->RxPktPendingTimer.expires = jiffies + MSECS(pHTInfo->RxReorderPendingTime);
- add_timer(&pTS->RxPktPendingTimer);
-#else
mod_timer(&pRxTs->RxPktPendingTimer, jiffies + MSECS(ieee->pHTInfo->RxReorderPendingTime));
-#endif
-
-#if 0
- if(timer_pending(&pRxTs->RxPktPendingTimer))
- del_timer_sync(&pRxTs->RxPktPendingTimer);
- pRxTs->RxPktPendingTimer.expires = jiffies + ieee->pHTInfo->RxReorderPendingTime;
- add_timer(&pRxTs->RxPktPendingTimer);
-#endif
}
spin_unlock_irqrestore(&(ieee->reorder_spinlock), flags);
//PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK);
IEEE80211_DEBUG(IEEE80211_DL_ERR, "get TS for Broadcast or Multicast\n");
return false;
}
-#if 0
- if(ieee->pStaQos->CurrentQosMode == QOS_DISABLE)
- { UP = 0; } //only use one TS
- else if(ieee->pStaQos->CurrentQosMode & QOS_WMM)
- {
-#else
+
if (ieee->current_network.qos_data.supported == 0)
UP = 0;
else
{
-#endif
// In WMM case: we use 4 TID only
if (!IsACValid(TID))
{
efuse_GetCurrentSize(struct net_device* dev);
static u8
efuse_CalculateWordCnts(u8 word_en);
-#if 0
-static void
-efuse_ResetLoader(struct net_device* dev);
-#endif
//
// API for power on power off!!!
//
efuse_PowerSwitch(dev, TRUE);
ReadEFuse(dev, 0, 128, Efuse);
efuse_PowerSwitch(dev, FALSE);
-#if 0
- // ==> Prevent efuse read error!!!
- RT_TRACE(COMP_INIT, "efuse_ResetLoader\n");
- efuse_ResetLoader(dev);
-
- // Change Efuse Clock for write action to 40MHZ
- write_nic_byte(dev, EFUSE_CLK, 0x03);
-
- ReadEFuse(dev, 0, 128, Efuse);
-
- // Change Efuse Clock for write action to 500K
- write_nic_byte(dev, EFUSE_CLK, 0x02);
-#if 0 // Error !!!!!!
- for(offset = 0;offset<16;offset++) // For 8192SE
- {
- PlatformFillMemory((PVOID)pg_data, 8, 0xff);
- efuse_PgPacketRead(pAdapter,offset,pg_data);
-
- PlatformMoveMemory((PVOID)&Efuse[offset*8], (PVOID)pg_data, 8);
- }
-#endif
-
- //
- // Error Check and Reset Again!!!!
- //
- if (Efuse[0] != 0x29 || Efuse[1] != 0x81)
- {
- // SW autoload fail, we have to read again!!!
- if (index ++ < 5)
- {
- RT_TRACE(COMP_INIT, "EFUSE R FAIL %d\n", index);
- efuse_ReadAllMap(dev, Efuse);
- // Wait a few time ???? Or need to do some setting ???
- // When we reload driver, efuse will be OK!!
- }
- }
- else
- {
- index = 0;
- }
-
- //efuse_PowerSwitch(pAdapter, FALSE);
-#endif
} // efuse_ReadAllMap
return word_cnts;
} // efuse_CalculateWordCnts
-
-/*-----------------------------------------------------------------------------
- * Function: efuse_ResetLoader
- *
- * Overview: When read Efuse Fail we must reset loader!!!!
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 11/22/2008 MHC Create Version 0.
- *
- *---------------------------------------------------------------------------*/
-#if 0
-static void efuse_ResetLoader(struct net_device* dev)
-{
- u16 tmpU2b;
-
- //
- // 2008/11/22 MH Sometimes, we may read efuse fail, for preventing the condition
- // We have to reset loader.
- //
- tmpU2b = read_nic_word(dev, SYS_FUNC_EN);
- write_nic_word(dev, SYS_FUNC_EN, (tmpU2b&~(BIT12)));
- //PlatformStallExecution(10000); // How long should we delay!!!
- mdelay(10);
- write_nic_word(dev, SYS_FUNC_EN, (tmpU2b|BIT12));
- //PlatformStallExecution(10000); // How long should we delay!!!
- mdelay(10);
-
-} // efuse_ResetLoader
-#endif
-
/*-----------------------------------------------------------------------------
* Function: EFUSE_ProgramMap
*
BaseBand_Config_AGC_TAB = 1, //Radio Path B
}BaseBand_Config_Type, *PBaseBand_Config_Type;
-#if 0
-typedef enum _RT_RF_TYPE_819xU{
- RF_TYPE_MIN = 0,
- RF_8225,
- RF_8256,
- RF_8258,
- RF_PSEUDO_11N = 4,
-}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
-#endif
-
#define RTL8187_REQT_READ 0xc0
#define RTL8187_REQT_WRITE 0x40
#define RTL8187_REQ_GET_REGS 0x05
#define FW_DM_DISABLE 0xfd00aa00
#define FW_BB_RESET_ENABLE 0xff00000d
#define FW_BB_RESET_DISABLE 0xff00000e
-#if 0
-//----------------------------------------------------------------------------
-// 8190 EEROM
-//----------------------------------------------------------------------------
-#define RTL8190_EEPROM_ID 0x8129
-//#define EEPROM_NODE_ADDRESS_BYTE_0 0x0C
-
-#define EEPROM_RFInd_PowerDiff 0x28
-#define EEPROM_ThermalMeter 0x29
-#define EEPROM_TxPwDiff_CrystalCap 0x2A //0x2A~0x2B
-#define EEPROM_TxPwIndex_CCK 0x2C //0x2C~0x39
-#define EEPROM_TxPwIndex_OFDM_24G 0x3A //0x3A~0x47
-#define EEPROM_TxPwIndex_OFDM_5G 0x34 //0x34~0x7B
-
-//The following definition is for eeprom 93c56......modified 20080220
-#define EEPROM_C56_CrystalCap 0x17 //0x17
-#define EEPROM_C56_RfA_CCK_Chnl1_TxPwIndex 0x80 //0x80
-#define EEPROM_C56_RfA_HT_OFDM_TxPwIndex 0x81 //0x81~0x83
-#define EEPROM_C56_RfC_CCK_Chnl1_TxPwIndex 0xbc //0xb8
-#define EEPROM_C56_RfC_HT_OFDM_TxPwIndex 0xb9 //0xb9~0xbb
-#define EEPROM_Customer_ID 0x7B //0x7B:CustomerID
-#define EEPROM_ICVersion_ChannelPlan 0x7C //0x7C:ChnlPlan,
- //0x7D:IC_Ver
-#define EEPROM_CRC 0x7E //0x7E~0x7F
-
-#define EEPROM_Default_LegacyHTTxPowerDiff 0x4
-#define EEPROM_Default_ThermalMeter 0x77
-#define EEPROM_Default_AntTxPowerDiff 0x0
-#define EEPROM_Default_TxPwDiff_CrystalCap 0x5
-#define EEPROM_Default_TxPower 0x1010
-#define EEPROM_Default_TxPowerLevel 0x10
-
-//
-// Define Different EEPROM type for customer
-//
-#define EEPROM_CID_DEFAULT 0x0
-#define EEPROM_CID_CAMEO 0x1
-#define EEPROM_CID_RUNTOP 0x2
-#define EEPROM_CID_Senao 0x3
-#define EEPROM_CID_TOSHIBA 0x4
-#define EEPROM_CID_NetCore 0x5
-#define EEPROM_CID_Nettronix 0x6
-#define EEPROM_CID_Pronet 0x7
-
-#endif
//
//--------------92SU require delete or move to other place later
}
-/**
-* Function: phy_RFSerialRead
-*
-* OverView: Read regster from RF chips
-*
-* Input:
-* PADAPTER Adapter,
-* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D
-* u4Byte Offset, //The target address to be read
-*
-* Output: None
-* Return: u4Byte reback value
-* Note: Threre are three types of serial operations:
-* 1. Software serial write
-* 2. Hardware LSSI-Low Speed Serial Interface
-* 3. Hardware HSSI-High speed
-* serial write. Driver need to implement (1) and (2).
-* This function is equal to the combination of RF_ReadReg() and RFLSSIRead()
-*/
-#if 0
-static u32
-phy_RFSerialRead(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset)
-{
-
- u32 retValue = 0;
- struct r8192_priv *priv = ieee80211_priv(dev);
- BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
- u32 NewOffset;
- //u32 value = 0;
- u32 tmplong,tmplong2;
- u32 RfPiEnable=0;
-#if 0
- if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs
- return retValue;
- if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs
- return retValue;
-#endif
- //
- // Make sure RF register offset is correct
- //
- Offset &= 0x3f;
-
- //
- // Switch page for 8256 RF IC
- //
- NewOffset = Offset;
-
- // For 92S LSSI Read RFLSSIRead
- // For RF A/B write 0x824/82c(does not work in the future)
- // We must use 0x824 for RF A and B to execute read trigger
- tmplong = rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord);
- tmplong2 = rtl8192_QueryBBReg(dev, pPhyReg->rfHSSIPara2, bMaskDWord);
- tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; //T65 RF
-
- rtl8192_setBBreg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong&(~bLSSIReadEdge));
- mdelay(1);
-
- rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bMaskDWord, tmplong2);
- mdelay(1);
-
- rtl8192_setBBreg(dev, rFPGA0_XA_HSSIParameter2, bMaskDWord, tmplong|bLSSIReadEdge);
- mdelay(1);
-
- if(eRFPath == RF90_PATH_A)
- RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter1, BIT8);
- else if(eRFPath == RF90_PATH_B)
- RfPiEnable = (u8)rtl8192_QueryBBReg(dev, rFPGA0_XB_HSSIParameter1, BIT8);
-
- if(RfPiEnable)
- { // Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF
- retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBackPi, bLSSIReadBackData);
- //DbgPrint("Readback from RF-PI : 0x%x\n", retValue);
- }
- else
- { //Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF
- retValue = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData);
- //DbgPrint("Readback from RF-SI : 0x%x\n", retValue);
- }
- //RTPRINT(FPHY, PHY_RFR, ("RFR-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rfLSSIReadBack, retValue));
-
- return retValue;
-
-}
-4
-
-
-/**
-* Function: phy_RFSerialWrite
-*
-* OverView: Write data to RF register (page 8~)
-*
-* Input:
-* PADAPTER Adapter,
-* RF90_RADIO_PATH_E eRFPath, //Radio path of A/B/C/D
-* u4Byte Offset, //The target address to be read
-* u4Byte Data //The new register Data in the target bit position
-* //of the target to be read
-*
-* Output: None
-* Return: None
-* Note: Threre are three types of serial operations:
-* 1. Software serial write
-* 2. Hardware LSSI-Low Speed Serial Interface
-* 3. Hardware HSSI-High speed
-* serial write. Driver need to implement (1) and (2).
-* This function is equal to the combination of RF_ReadReg() and RFLSSIRead()
- *
- * Note: For RF8256 only
- * The total count of RTL8256(Zebra4) register is around 36 bit it only employs
- * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10])
- * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration
- * programming guide" for more details.
- * Thus, we define a sub-finction for RTL8526 register address conversion
- * ===========================================================
- * Register Mode RegCTL[1] RegCTL[0] Note
- * (Reg00[12]) (Reg00[10])
- * ===========================================================
- * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf)
- * ------------------------------------------------------------------
- * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf)
- * ------------------------------------------------------------------
- * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf)
- * ------------------------------------------------------------------
- *
- * 2008/09/02 MH Add 92S RF definition
- *
- *
- *
-*/
-static void
-phy_RFSerialWrite(struct net_device* dev,RF90_RADIO_PATH_E eRFPath,u32 Offset,u32 Data)
-{
- u32 DataAndAddr = 0;
- struct r8192_priv *priv = ieee80211_priv(dev);
- BB_REGISTER_DEFINITION_T *pPhyReg = &priv->PHYRegDef[eRFPath];
- u32 NewOffset;
-
-#if 0
- //<Roger_TODO> We should check valid regs for RF_6052 case.
- if(pHalData->RFChipID == RF_8225 && Offset > 0x24) //36 valid regs
- return;
- if(pHalData->RFChipID == RF_8256 && Offset > 0x2D) //45 valid regs
- return;
-#endif
-
- Offset &= 0x3f;
-
- //
- // Shadow Update
- //
- PHY_RFShadowWrite(dev, eRFPath, Offset, Data);
-
- //
- // Switch page for 8256 RF IC
- //
- NewOffset = Offset;
-
- //
- // Put write addr in [5:0] and write data in [31:16]
- //
- //DataAndAddr = (Data<<16) | (NewOffset&0x3f);
- DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; // T65 RF
-
- //
- // Write Operation
- //
- rtl8192_setBBreg(dev, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr);
- //RTPRINT(FPHY, PHY_RFW, ("RFW-%d Addr[0x%x]=0x%x\n", eRFPath, pPhyReg->rf3wireOffset, DataAndAddr));
-
-}
-#endif
-
/**
* Function: phy_CalculateBitShift
*
}
-#if 0 // 2008/08/18 MH Disable for 92SE
- if(pHalData->VersionID > VERSION_8190_BD)
- {
- //if(pHalData->RF_Type == RF_2T4R)
- //{
- // Antenna gain offset from B/C/D to A
- u4RegValue = ( pHalData->AntennaTxPwDiff[2]<<8 |
- pHalData->AntennaTxPwDiff[1]<<4 |
- pHalData->AntennaTxPwDiff[0]);
- //}
- //else
- //u4RegValue = 0;
-
- PHY_SetBBReg(dev, rFPGA0_TxGainStage,
- (bXBTxAGC|bXCTxAGC|bXDTxAGC), u4RegValue);
-
- // CrystalCap
- // Simulate 8192???
- u4RegValue = pHalData->CrystalCap;
- PHY_SetBBReg(dev, rFPGA0_AnalogParameter1, bXtalCap92x, u4RegValue);
- // Simulate 8190??
- //u4RegValue = ((pHalData->CrystalCap & 0xc)>>2); // bit2~3 of crystal cap
- //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter2, bXtalCap23, u4RegValue);
-
- }
-#endif
-
// Check if the CCK HighPower is turned ON.
// This is used to calculate PWDB.
priv->bCckHighPower = (bool)(rtl8192_QueryBBReg(dev, rFPGA0_XA_HSSIParameter2, 0x200));
// Calculate Antenna pwr diff
if (pwrdiff[rfpath] < 8) // 0~+7
{
- #if 0//cosa, it doesn't need to add the offset here
- if (rfpath == 0)
- powerlevelOFDM24G += pwrdiff[rfpath];
- #endif
ht20pwr[rfpath] += pwrdiff[rfpath];
}
else // index8-15=-8~-1
{
- #if 0//cosa, it doesn't need to add the offset here
- if (rfpath == 0)
- powerlevelOFDM24G -= (15-pwrdiff[rfpath]);
- #endif
ht20pwr[rfpath] -= (15-pwrdiff[rfpath]);
}
}
ht20pwr[rfpath] -= pwrdiff[rfpath];
}
- #if 0//cosa, it doesn't need to add the offset here
- if (rfpath == 0)
- powerlevelOFDM24G -= pwrdiff[rfpath];
- #endif
}
if (priv->rf_type == RF_2T2R)
}
}
}
-#if 0//cosa, useless
- // Read HT/Legacy OFDM diff
- legacy_ant_pwr_diff= pHalData->TxPwrLegacyHtDiff[RF90_PATH_A][index];
-#endif
}
//Cosa added for protection, the reg rFPGA0_TxGainStage
break;
case RF_8256:
-#if 0
- PHY_SetRF8256CCKTxPower(dev, powerlevel);
- PHY_SetRF8256OFDMTxPower(dev, powerlevelOFDM24G);
-#endif
break;
case RF_6052:
//struct r8192_priv *priv = ieee80211_priv(dev);
//u32 BitMask;
//u8 initial_gain;
-
-#if 0 // For 8192s test disable
- if(!dev->bDriverStopped)
- {
- switch(Operation)
- {
- case IG_Backup:
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("IG_Backup, backup the initial gain.\n"));
- initial_gain = priv->DefaultInitialGain[0];
- BitMask = bMaskByte0;
- if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM)
- PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
- pMgntInfo->InitGain_Backup.XAAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, BitMask);
- pMgntInfo->InitGain_Backup.XBAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, BitMask);
- pMgntInfo->InitGain_Backup.XCAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, BitMask);
- pMgntInfo->InitGain_Backup.XDAGCCore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, BitMask);
- BitMask = bMaskByte2;
- pMgntInfo->InitGain_Backup.CCA = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, BitMask);
-
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc50 is %x\n",pMgntInfo->InitGain_Backup.XAAGCCore1));
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc58 is %x\n",pMgntInfo->InitGain_Backup.XBAGCCore1));
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc60 is %x\n",pMgntInfo->InitGain_Backup.XCAGCCore1));
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xc68 is %x\n",pMgntInfo->InitGain_Backup.XDAGCCore1));
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan InitialGainBackup 0xa0a is %x\n",pMgntInfo->InitGain_Backup.CCA));
-
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Write scan initial gain = 0x%x \n", initial_gain));
- write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain);
- write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain);
- write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain);
- write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain);
- break;
- case IG_Restore:
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("IG_Restore, restore the initial gain.\n"));
- BitMask = 0x7f; //Bit0~ Bit6
- if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM)
- PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x8); // FW DIG OFF
-
- rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XAAGCCore1);
- rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XBAGCCore1);
- rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XCAGCCore1);
- rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, BitMask, (u32)pMgntInfo->InitGain_Backup.XDAGCCore1);
- BitMask = (BIT22|BIT23);
- rtl8192_setBBreg(dev, rCCK0_CCA, BitMask, (u32)pMgntInfo->InitGain_Backup.CCA);
-
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc50 is %x\n",pMgntInfo->InitGain_Backup.XAAGCCore1));
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc58 is %x\n",pMgntInfo->InitGain_Backup.XBAGCCore1));
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc60 is %x\n",pMgntInfo->InitGain_Backup.XCAGCCore1));
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xc68 is %x\n",pMgntInfo->InitGain_Backup.XDAGCCore1));
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Scan BBInitialGainRestore 0xa0a is %x\n",pMgntInfo->InitGain_Backup.CCA));
-
- if(DM_DigTable.Dig_Algorithm == DIG_ALGO_BY_FALSE_ALARM)
- PHY_SetMacReg(dev, UFWP, bMaskByte1, 0x1); // FW DIG ON
- break;
- default:
- RT_TRACE(COMP_SCAN, DBG_LOUD, ("Unknown IG Operation. \n"));
- break;
- }
- }
-#endif
}
/*-----------------------------------------------------------------------------
//write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
//write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
//write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
- #if 0 //LZM 090219
- rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000);
- rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317);
- rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204);
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
- #endif
if (priv->card_8192_version >= VERSION_8192S_BCUT)
write_nic_byte(dev, rFPGA0_AnalogParameter2, 0x58);
//write_nic_dword(dev, rCCK0_TxFilter1, 0x35360000);
//write_nic_dword(dev, rCCK0_TxFilter2, 0x121c252e);
//write_nic_dword(dev, rCCK0_DebugPort, 0x00000409);
- #if 0 //LZM 090219
- rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x35360000);
- rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x121c252e);
- rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000409);
- #endif
// Set Control channel to upper or lower. These settings are required only for 40MHz
rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
else
priv->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
-#if 0
- if(!priv->bDriverStopped)
- {
-#ifdef USE_WORKITEM
- PlatformScheduleWorkItem(&(priv->SetBWModeWorkItem));//SetBWModeCallback8192SUsbWorkItem
-#else
- PlatformSetTimer(dev, &(priv->SetBWModeTimer), 0);//PHY_SetBWModeCallback8192S
-#endif
- }
-#endif
if((priv->up) )// && !(RT_CANNOT_IO(Adapter) && Adapter->bInSetPower) )
{
SetBWModeCallback8192SUsbWorkItem(dev);
bool rtValue = TRUE;
// NOt check RF Path now.!
-#if 0
- if (priv->rf_type == RF_1T2R && eRFPath != RF90_PATH_A)
- {
- rtValue = FALSE;
- }
- if (priv->rf_type == RF_1T2R && eRFPath != RF90_PATH_A)
- {
-
- }
-#endif
return rtValue;
} /* PHY_CheckIsLegalRfPath8192S */
case HT_CHANNEL_WIDTH_20:
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
- #if 0 //LZM090219
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
-
- // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
- //write_nic_dword(dev, rCCK0_TxFilter1, 0x1a1b0000);
- //write_nic_dword(dev, rCCK0_TxFilter2, 0x090e1317);
- //write_nic_dword(dev, rCCK0_DebugPort, 0x00000204);
- rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000);
- rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317);
- rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204);
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00300000, 3);
- #endif
if (priv->card_8192_version >= VERSION_8192S_BCUT)
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58);
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x0);
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x0);
- #if 0 //LZM 090219
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bADClkPhase, 1);
-
- // Correct the tx power for CCK rate in 20M. Suggest by YN, 20071207
- rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x1a1b0000);
- rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x090e1317);
- rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000204);
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x00100000, 1);
- #endif
-
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0xff, 0x58);
break;
case HT_CHANNEL_WIDTH_20_40:
rtl8192_setBBreg(dev, rFPGA0_RFMOD, bRFMOD, 0x1);
rtl8192_setBBreg(dev, rFPGA1_RFMOD, bRFMOD, 0x1);
- #if 0 //LZM 090219
- rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
-
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, bADClkPhase, 0);
-
- rtl8192_setBBreg(dev, rOFDM1_LSTF, 0xC00, priv->nCur40MhzPrimeSC);
- // Correct the tx power for CCK rate in 40M. Suggest by YN, 20071207
- rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskDWord, 0x35360000);
- rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, 0x121c252e);
- rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskDWord, 0x00000409);
- #endif
// Set Control channel to upper or lower. These settings are required only for 40MHz
rtl8192_setBBreg(dev, rCCK0_System, bCCKSideBand, (priv->nCur40MhzPrimeSC>>1));
*---------------------------------------------------------------------------*/
extern void RF_ChangeTxPath(struct net_device* dev, u16 DataRate)
{
-// We do not support gain table change inACUT now !!!! Delete later !!!
-#if 0//(RTL92SE_FPGA_VERIFY == 0)
- static u1Byte RF_Path_Type = 2; // 1 = 1T 2= 2T
- static u4Byte tx_gain_tbl1[6]
- = {0x17f50, 0x11f40, 0x0cf30, 0x08720, 0x04310, 0x00100};
- static u4Byte tx_gain_tbl2[6]
- = {0x15ea0, 0x10e90, 0x0c680, 0x08250, 0x04040, 0x00030};
- u1Byte i;
-
- if (RF_Path_Type == 2 && (DataRate&0xF) <= 0x7)
- {
- // Set TX SYNC power G2G3 loop filter
- PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
- RF_TXPA_G2, bMask20Bits, 0x0f000);
- PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
- RF_TXPA_G3, bMask20Bits, 0xeacf1);
-
- // Change TX AGC gain table
- for (i = 0; i < 6; i++)
- PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
- RF_TX_AGC, bMask20Bits, tx_gain_tbl1[i]);
-
- // Set PA to high value
- PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
- RF_TXPA_G2, bMask20Bits, 0x01e39);
- }
- else if (RF_Path_Type == 1 && (DataRate&0xF) >= 0x8)
- {
- // Set TX SYNC power G2G3 loop filter
- PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
- RF_TXPA_G2, bMask20Bits, 0x04440);
- PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
- RF_TXPA_G3, bMask20Bits, 0xea4f1);
-
- // Change TX AGC gain table
- for (i = 0; i < 6; i++)
- PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
- RF_TX_AGC, bMask20Bits, tx_gain_tbl2[i]);
-
- // Set PA low gain
- PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)RF90_PATH_A,
- RF_TXPA_G2, bMask20Bits, 0x01e19);
- }
-#endif
-
} /* RF_ChangeTxPath */
{
ofdm_bandedge_chnl_low = 1;
ofdm_bandedge_chnl_high = 11;
- #if 0//cosa, Todo: check ofdm 40MHz, when lower and duplicate, the bandedge chnl low=3, high=9
- if (pHalData->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40)
- { // Is it the same with the document?
- if(pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER)
- else if(pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER;
- else
- pHalData->nCur40MhzPrimeSC = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
- }
- #endif
BandEdge_Pwrdiff = 0;
if (Channel <= ofdm_bandedge_chnl_low)
BandEdge_Pwrdiff = priv->TxPwrbandEdgeLegacyOfdm[RF90_PATH_A][0];
//
if (priv->rf_type == RF_2T2R)
{
- #if 0//cosa, we have only one AntennaTxPwDiff
- // HT OFDM
- if (index > 1)
- {
- rf_pwr_diff = pHalData->AntennaTxPwDiff[0];
- }
- // Legacy OFDM
- else
- {
- rf_pwr_diff = pHalData->AntTxPwDiffLegacy[0];
- }
- #endif
rf_pwr_diff = priv->AntennaTxPwDiff[0];
//RTPRINT(FPHY, PHY_TXPWR, ("2T2R RF-B to RF-A PWR DIFF=%d\n", rf_pwr_diff));
extern RT_STATUS PHY_RF6052_Config(struct net_device * dev);
extern void PHY_RFShadowRefresh( struct net_device * dev);
extern void PHY_RFShadowWrite( struct net_device* dev, u32 eRFPath, u32 Offset, u32 Data);
-#if 0
-//
-// RF Shadow operation relative API
-//
-extern u32
-PHY_RFShadowRead(
- struct net_device * dev,
- RF90_RADIO_PATH_E eRFPath,
- u32 Offset);
-extern void
-PHY_RFShadowCompare(
- struct net_device * dev,
- RF90_RADIO_PATH_E eRFPath,
- u32 Offset);
-extern void
-PHY_RFShadowRecorver(
- struct net_device * dev,
- RF90_RADIO_PATH_E eRFPath,
- u32 Offset);
-extern void
-PHY_RFShadowCompareAll(
- struct net_device * dev);
-extern void
-PHY_RFShadowRecorverAll(
- struct net_device * dev);
-extern void
-PHY_RFShadowCompareFlagSet(
- struct net_device * dev,
- RF90_RADIO_PATH_E eRFPath,
- u32 Offset,
- u8 Type);
-extern void
-PHY_RFShadowRecorverFlagSet(
- struct net_device * dev,
- RF90_RADIO_PATH_E eRFPath,
- u32 Offset,
- u8 Type);
-extern void
-PHY_RFShadowCompareFlagSetAll(
- struct net_device * dev);
-extern void
-PHY_RFShadowRecorverFlagSetAll(
- struct net_device * dev);
-extern void
-PHY_RFShadowRefresh(
- struct net_device * dev);
-#endif
/*--------------------------Exported Function prototype---------------------*/
// Rx smooth factor
#define Rx_Smooth_Factor 20
-#if 0 //we need to use RT_TRACE instead DMESG as RT_TRACE will clearly show debug level wb.
-#define DMESG(x,a...) printk(KERN_INFO RTL819xU_MODULE_NAME ": " x "\n", ## a)
-#define DMESGW(x,a...) printk(KERN_WARNING RTL819xU_MODULE_NAME ": WW:" x "\n", ## a)
-#define DMESGE(x,a...) printk(KERN_WARNING RTL819xU_MODULE_NAME ": EE:" x "\n", ## a)
-#else
#define DMESG(x,a...)
#define DMESGW(x,a...)
#define DMESGE(x,a...)
#define COMP_DOWN BIT29 //for rm driver module
#define COMP_RESET BIT30 //for silent reset
#define COMP_ERR BIT31 //for error out, always on
-#endif
#define RTL819x_DEBUG
#ifdef RTL819x_DEBUG
}RTL8192SUSB_LOOPBACK_E;
//#endif
-
-#if 0
-/* due to rtl8192 firmware */
-typedef enum _desc_packet_type_e{
- DESC_PACKET_TYPE_INIT = 0,
- DESC_PACKET_TYPE_NORMAL = 1,
-}desc_packet_type_e;
-
-typedef enum _firmware_source{
- FW_SOURCE_IMG_FILE = 0,
- FW_SOURCE_HEADER_FILE = 1, //from header file
-}firmware_source_e, *pfirmware_source_e;
-
-typedef enum _firmware_status{
- FW_STATUS_0_INIT = 0,
- FW_STATUS_1_MOVE_BOOT_CODE = 1,
- FW_STATUS_2_MOVE_MAIN_CODE = 2,
- FW_STATUS_3_TURNON_CPU = 3,
- FW_STATUS_4_MOVE_DATA_CODE = 4,
- FW_STATUS_5_READY = 5,
-}firmware_status_e;
-
-typedef struct _rt_firmare_seg_container {
- u16 seg_size;
- u8 *seg_ptr;
-}fw_seg_container, *pfw_seg_container;
-
-//--------------------------------------------------------------------------------
-// 8192S Firmware related
-//--------------------------------------------------------------------------------
-typedef struct _RT_8192S_FIRMWARE_PRIV { //8-bytes alignment required
-
- //--- LONG WORD 0 ----
- u32 RegulatoryClass;
- u32 Rfintfs;
-
- //--- LONG WORD 1 ----
- u32 ChipVer;
- u32 HCISel;
-
- //--- LONG WORD 2 ----
- u32 IBKMode;
- u32 Rsvd00;
-
- //--- LONG WORD 3 ----
- u32 Rsvd01;
- u8 Qos_En; // QoS enable
- u8 En40MHz; // 40MHz BW enable
- u8 AMSDU2AMPDU_En; //14181 convert AMSDU to AMPDU, 0: disable
- u8 AMPDU_En; //111n AMPDU/AMSDU enable
-
- //--- LONG WORD 4 ----
- u8 rate_control_offload;//FW offloads, 0: driver handles
- u8 aggregation_offload; // FW offloads, 0: driver handles
- u8 beacon_offload; //FW offloads, 0: driver handles
- u8 MLME_offload; // FW offloads, 0: driver handles
- u8 hwpc_offload; // FW offloads, 0: driver handles
- u8 tcp_checksum_offload; //FW offloads, 0: driver handles
- u8 tcp_offload; //FW offloads, 0: driver handles
- u8 ps_control_offload; //FW offloads, 0: driver handles
-
- //--- LONG WORD 5 ----
- u8 WWLAN_Offload; // FW offloads, 0: driver handles
- u8 MPMode; // normal mode, 0: MP mode;
- u16 Version; //0x8000 ~ 0x8FFF for FPGA version, 0x0000 ~ 0x7FFF for ASIC version,
- u16 Signature; //0x12: 8712, 0x92: 8192S
- u16 Rsvd11;
-
-// u32 rsvd1;
-// u32 wireless_band; //no A-band exists in 8712
-}RT_8192S_FIRMWARE_PRIV, *PRT_8192S_FIRMWARE_PRIV;
-
-typedef struct _RT_8192S_FIRMWARE_HDR {//8-byte alinment required
-
- //--- LONG WORD 0 ----
- u16 Signature;
- u16 Version; //0x8000 ~ 0x8FFF for FPGA version, 0x0000 ~ 0x7FFF for ASIC version,
- u32 DMEMSize; //define the size of boot loader
-
-
- //--- LONG WORD 1 ----
- u32 IMG_IMEM_SIZE; //define the size of FW in IMEM
- u32 IMG_SRAM_SIZE; //define the size of FW in SRAM
-
- //--- LONG WORD 2 ----
- u32 FW_PRIV_SIZE; //define the size of DMEM variable
- u32 Rsvd0;
-
- //--- LONG WORD 3 ----
- u32 Rsvd1;
- u32 Rsvd2;
-
- RT_8192S_FIRMWARE_PRIV FWPriv;
-
-}RT_8192S_FIRMWARE_HDR, *PRT_8192S_FIRMWARE_HDR;
-
-#define RT_8192S_FIRMWARE_HDR_SIZE 80
-
-typedef enum _FIRMWARE_8192S_STATUS{
- FW_STATUS_INIT = 0,
- FW_STATUS_LOAD_IMEM = 1,
- FW_STATUS_LOAD_EMEM = 2,
- FW_STATUS_LOAD_DMEM = 3,
- FW_STATUS_READY = 4,
-}FIRMWARE_8192S_STATUS;
-
-#define RTL8190_MAX_FIRMWARE_CODE_SIZE 64000 //64k
-
-typedef struct _rt_firmware{
- firmware_source_e eFWSource;
- PRT_8192S_FIRMWARE_HDR pFwHeader;
- FIRMWARE_8192S_STATUS FWStatus;
- u8 FwIMEM[64000];
- u8 FwEMEM[64000];
- u32 FwIMEMLen;
- u32 FwEMEMLen;
- u8 szFwTmpBuffer[164000];
- u16 CmdPacketFragThresold;
- //firmware_status_e firmware_status;//in 92u temp FIXLZM
- //u16 cmdpacket_frag_thresold;//in 92u temp FIXLZM
- //u8 firmware_buf[RTL8190_MAX_FIRMWARE_CODE_SIZE];//in 92u temp FIXLZM
- //u16 firmware_buf_size;//in 92u temp FIXLZM
-
-}rt_firmware, *prt_firmware;
-typedef struct _rt_firmware_info_819xUsb{
- u8 sz_info[16];
-}rt_firmware_info_819xUsb, *prt_firmware_info_819xUsb;
-#endif
-
//+by amy 080507
#define MAX_RECEIVE_BUFFER_SIZE 9100 // Add this to 9100 bytes to receive A-MSDU from RT-AP
unsigned char buf[0xff];
}rtl_reg_debug;
-
-
-
-
-#if 0
-
-typedef struct tx_pendingbuf
-{
- struct ieee80211_txb *txb;
- short ispending;
- short descfrag;
-} tx_pendigbuf;
-
-#endif
-
typedef struct _rt_9x_tx_rate_history {
u32 cck[4];
u32 ofdm[8];
UART_PRIORITY //0x0F
} priority_t;
-#if 0
-typedef enum{
- NIC_8192U = 1,
- NIC_8190P = 2,
- NIC_8192E = 3,
- NIC_8192SE = 4,
- NIC_8192SU = 5,
- } nic_t;
-#endif
-
-#if 0 //defined in Qos.h
-//typedef u32 AC_CODING;
-#define AC0_BE 0 // ACI: 0x00 // Best Effort
-#define AC1_BK 1 // ACI: 0x01 // Background
-#define AC2_VI 2 // ACI: 0x10 // Video
-#define AC3_VO 3 // ACI: 0x11 // Voice
-#define AC_MAX 4 // Max: define total number; Should not to be used as a real enum.
-
-//
-// ECWmin/ECWmax field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
-//
-typedef union _ECW{
- u8 charData;
- struct
- {
- u8 ECWmin:4;
- u8 ECWmax:4;
- }f; // Field
-}ECW, *PECW;
-
-//
-// ACI/AIFSN Field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _ACI_AIFSN{
- u8 charData;
-
- struct
- {
- u8 AIFSN:4;
- u8 ACM:1;
- u8 ACI:2;
- u8 Reserved:1;
- }f; // Field
-}ACI_AIFSN, *PACI_AIFSN;
-
-//
-// AC Parameters Record Format.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _AC_PARAM{
- u32 longData;
- u8 charData[4];
-
- struct
- {
- ACI_AIFSN AciAifsn;
- ECW Ecw;
- u16 TXOPLimit;
- }f; // Field
-}AC_PARAM, *PAC_PARAM;
-
-#endif
#ifdef JOHN_HWSEC
struct ssid_thread {
struct net_device *dev;
MODULE_DESCRIPTION("Linux driver for Realtek RTL8192 USB WiFi cards");
static char* ifname = "wlan%d";
-#if 0
-static int hwseqnum = 0;
-static int hwwep = 0;
-#endif
static int hwwep = 1; //default use hw. set 0 to use software security
static int channels = 0x3fff;
return len;
}
-#if 0
-static int proc_get_cck_reg(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- int len = 0;
- int i,n;
-
- int max = 0x5F;
-
- /* This dump the current register page */
- for(n=0;n<=max;)
- {
- //printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
-
- for(i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_phy_cck(dev,n));
-
- // printk("%2x ",read_nic_byte(dev,n));
- }
- len += snprintf(page + len, count - len,"\n");
-
-
- *eof = 1;
- return len;
-}
-
-#endif
-
-#if 0
-static int proc_get_ofdm_reg(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- int len = 0;
- int i,n;
-
- //int max=0xff;
- int max = 0x40;
-
- /* This dump the current register page */
- for(n=0;n<=max;)
- {
- //printk( "\nD: %2x> ", n);
- len += snprintf(page + len, count - len,
- "\nD: %2x > ",n);
-
- for(i=0;i<16 && n<=max;i++,n++)
- len += snprintf(page + len, count - len,
- "%2x ",read_phy_ofdm(dev,n));
-
- // printk("%2x ",read_nic_byte(dev,n));
- }
- len += snprintf(page + len, count - len,"\n");
-
-
-
- *eof = 1;
- return len;
-}
-
-#endif
-
-#if 0
-static int proc_get_stats_hw(char *page, char **start,
- off_t offset, int count,
- int *eof, void *data)
-{
- struct net_device *dev = data;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- int len = 0;
-
- len += snprintf(page + len, count - len,
- "NIC int: %lu\n"
- "Total int: %lu\n",
- priv->stats.ints,
- priv->stats.shints);
-
- *eof = 1;
- return len;
-}
-#endif
-
static int proc_get_stats_tx(char *page, char **start,
off_t offset, int count,
int *eof, void *data)
dev->name);
return;
}
- #if 0
- e = create_proc_read_entry("stats-hw", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_hw, dev);
-
- if (!e) {
- DMESGE("Unable to initialize "
- "/proc/net/rtl8192/%s/stats-hw\n",
- dev->name);
- }
- #endif
e = create_proc_read_entry("stats-rx", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_stats_rx, dev);
"/proc/net/rtl8192/%s/stats-tx\n",
dev->name);
}
- #if 0
- e = create_proc_read_entry("stats-ieee", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_stats_ieee, dev);
-
- if (!e) {
- DMESGE("Unable to initialize "
- "/proc/net/rtl8192/%s/stats-ieee\n",
- dev->name);
- }
-
- #endif
e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_stats_ap, dev);
"/proc/net/rtl8192/%s/registers-e\n",
dev->name);
}
-#if 0
- e = create_proc_read_entry("cck-registers", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_cck_reg, dev);
- if (!e) {
- RT_TRACE(COMP_ERR, "Unable to initialize "
- "/proc/net/rtl8192/%s/cck-registers\n",
- dev->name);
- }
-
- e = create_proc_read_entry("ofdm-registers", S_IFREG | S_IRUGO,
- priv->dir_dev, proc_get_ofdm_reg, dev);
- if (!e) {
- RT_TRACE(COMP_ERR, "Unable to initialize "
- "/proc/net/rtl8192/%s/ofdm-registers\n",
- dev->name);
- }
-#endif
}
/****************************************************************************
-----------------------------MISC STUFF-------------------------
------------------------------HW STUFF---------------------------
*****************************************************************************/
-#if 0
-void rtl8192_irq_enable(struct net_device *dev)
-{
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- //priv->irq_enabled = 1;
-/*
- write_nic_word(dev,INTA_MASK,INTA_RXOK | INTA_RXDESCERR | INTA_RXOVERFLOW |\
- INTA_TXOVERFLOW | INTA_HIPRIORITYDESCERR | INTA_HIPRIORITYDESCOK |\
- INTA_NORMPRIORITYDESCERR | INTA_NORMPRIORITYDESCOK |\
- INTA_LOWPRIORITYDESCERR | INTA_LOWPRIORITYDESCOK | INTA_TIMEOUT);
-*/
- write_nic_word(dev,INTA_MASK, priv->irq_mask);
-}
-
-
-void rtl8192_irq_disable(struct net_device *dev)
-{
-// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- write_nic_word(dev,INTA_MASK,0);
- force_pci_posting(dev);
-// priv->irq_enabled = 0;
-}
-#endif
-
void rtl8192_set_mode(struct net_device *dev,int mode)
{
u8 ecmd;
RT_TRACE(COMP_CH, "=====>%s()====ch:%d\n", __FUNCTION__, ch);
//printk("=====>%s()====ch:%d\n", __FUNCTION__, ch);
priv->chan=ch;
- #if 0
- if(priv->ieee80211->iw_mode == IW_MODE_ADHOC ||
- priv->ieee80211->iw_mode == IW_MODE_MASTER){
-
- priv->ieee80211->link_state = WLAN_LINK_ASSOCIATED;
- priv->ieee80211->master_chan = ch;
- rtl8192_update_beacon_ch(dev);
- }
- #endif
/* this hack should avoid frame TX during channel setting*/
rtl8192_rx_initiate(dev);
// rtl8192_set_rxconf(dev);
-#if 0
- if(NIC_8187 == priv->card_8187) {
- cmd=read_nic_byte(dev,CMD);
- write_nic_byte(dev,CMD,cmd | (1<<CMD_RX_ENABLE_SHIFT));
- }
- else {
- //write_nic_dword(dev, RX_CONF, priv->ReceiveConfig);
- }
-#endif
}
void rtl8192_tx_enable(struct net_device *dev)
{
-#if 0
- u8 cmd;
- u8 byte;
- u32 txconf;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- //test loopback
- // priv->TransmitConfig |= (TX_LOOPBACK_BASEBAND<<TX_LOOPBACK_SHIFT);
- if(NIC_8187B == priv->card_8187){
- write_nic_dword(dev, TX_CONF, priv->TransmitConfig);
- byte = read_nic_byte(dev, MSR);
- byte |= MSR_LINK_ENEDCA;
- write_nic_byte(dev, MSR, byte);
- } else {
- byte = read_nic_byte(dev,CW_CONF);
- byte &= ~(1<<CW_CONF_PERPACKET_CW_SHIFT);
- byte &= ~(1<<CW_CONF_PERPACKET_RETRY_SHIFT);
- write_nic_byte(dev, CW_CONF, byte);
-
- byte = read_nic_byte(dev, TX_AGC_CTL);
- byte &= ~(1<<TX_AGC_CTL_PERPACKET_GAIN_SHIFT);
- byte &= ~(1<<TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT);
- byte &= ~(1<<TX_AGC_CTL_FEEDBACK_ANT);
- write_nic_byte(dev, TX_AGC_CTL, byte);
-
- txconf= read_nic_dword(dev,TX_CONF);
-
-
- txconf = txconf &~ TX_LOOPBACK_MASK;
-
-#ifndef LOOP_TEST
- txconf = txconf | (TX_LOOPBACK_NONE<<TX_LOOPBACK_SHIFT);
-#else
- txconf = txconf | (TX_LOOPBACK_BASEBAND<<TX_LOOPBACK_SHIFT);
-#endif
- txconf = txconf &~ TCR_SRL_MASK;
- txconf = txconf &~ TCR_LRL_MASK;
-
- txconf = txconf | (priv->retry_data<<TX_LRLRETRY_SHIFT); // long
- txconf = txconf | (priv->retry_rts<<TX_SRLRETRY_SHIFT); // short
-
- txconf = txconf &~ (1<<TX_NOCRC_SHIFT);
-
- txconf = txconf &~ TCR_MXDMA_MASK;
- txconf = txconf | (TCR_MXDMA_2048<<TCR_MXDMA_SHIFT);
-
- txconf = txconf | TCR_DISReqQsize;
- txconf = txconf | TCR_DISCW;
- txconf = txconf &~ TCR_SWPLCPLEN;
-
- txconf=txconf | (1<<TX_NOICV_SHIFT);
-
- write_nic_dword(dev,TX_CONF,txconf);
-
-#ifdef DEBUG_TX
- DMESG("txconf: %x %x",txconf,read_nic_dword(dev,TX_CONF));
-#endif
-
- cmd=read_nic_byte(dev,CMD);
- write_nic_byte(dev,CMD,cmd | (1<<CMD_TX_ENABLE_SHIFT));
- }
-#endif
-}
-
-#if 0
-void rtl8192_beacon_tx_enable(struct net_device *dev)
-{
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dma_poll_mask &=~(1<<TX_DMA_STOP_BEACON_SHIFT);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
-}
-
-
-void rtl8192_
-_disable(struct net_device *dev)
-{
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
}
-#endif
-
-
void rtl8192_rtx_disable(struct net_device *dev)
{
u8 cmd;
int alloc_tx_beacon_desc_ring(struct net_device *dev, int count)
{
- #if 0
- int i;
- u32 *tmp;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
-
- priv->txbeaconring = (u32*)pci_alloc_consistent(priv->pdev,
- sizeof(u32)*8*count,
- &priv->txbeaconringdma);
- if (!priv->txbeaconring) return -1;
- for (tmp=priv->txbeaconring,i=0;i<count;i++){
- *tmp = *tmp &~ (1<<31); // descriptor empty, owned by the drv
- /*
- *(tmp+2) = (u32)dma_tmp;
- *(tmp+3) = bufsize;
- */
- if(i+1<count)
- *(tmp+4) = (u32)priv->txbeaconringdma+((i+1)*8*4);
- else
- *(tmp+4) = (u32)priv->txbeaconringdma;
-
- tmp=tmp+8;
- }
- #endif
return 0;
}
-#if 0
-void rtl8192_reset(struct net_device *dev)
-{
-
- //struct r8192_priv *priv = ieee80211_priv(dev);
- //u8 cr;
-
-
- /* make sure the analog power is on before
- * reset, otherwise reset may fail
- */
-#if 0
- if(NIC_8187 == priv->card_8187) {
- rtl8192_set_anaparam(dev, RTL8225_ANAPARAM_ON);
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
- rtl8192_irq_disable(dev);
- mdelay(200);
- write_nic_byte_E(dev,0x18,0x10);
- write_nic_byte_E(dev,0x18,0x11);
- write_nic_byte_E(dev,0x18,0x00);
- mdelay(200);
- }
-#endif
- printk("=====>reset?\n");
-#if 0
- cr=read_nic_byte(dev,CMD);
- cr = cr & 2;
- cr = cr | (1<<CMD_RST_SHIFT);
- write_nic_byte(dev,CMD,cr);
-
- force_pci_posting(dev);
-
- mdelay(200);
-
- if(read_nic_byte(dev,CMD) & (1<<CMD_RST_SHIFT))
- RT_TRACE(COMP_ERR, "Card reset timeout!\n");
- else
- RT_TRACE(COMP_DOWN, "Card successfully reset\n");
-#endif
-#if 0
- if(NIC_8187 == priv->card_8187) {
-
- printk("This is RTL8187 Reset procedure\n");
- rtl8192_set_mode(dev,EPROM_CMD_LOAD);
- force_pci_posting(dev);
- mdelay(200);
-
- /* after the eeprom load cycle, make sure we have
- * correct anaparams
- */
- rtl8192_set_anaparam(dev, RTL8225_ANAPARAM_ON);
- rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON);
- }
- else
-#endif
- printk("This is RTL8187B Reset procedure\n");
-
-}
-#endif
inline u16 ieeerate2rtlrate(int rate)
{
switch(rate){
return status;
}
-#if 0
-void rtl8192_tx_queues_stop(struct net_device *dev)
-{
- //struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- u8 dma_poll_mask = (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_HIPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_NORMPRIORITY_SHIFT);
- dma_poll_mask |= (1<<TX_DMA_STOP_BEACON_SHIFT);
-
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
-}
-#endif
-
void rtl8192_data_hard_stop(struct net_device *dev)
{
//FIXME !!
- #if 0
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dma_poll_mask |= (1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
- #endif
}
void rtl8192_data_hard_resume(struct net_device *dev)
{
// FIXME !!
- #if 0
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- priv->dma_poll_mask &= ~(1<<TX_DMA_STOP_LOWPRIORITY_SHIFT);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,TX_DMA_POLLING,priv->dma_poll_mask);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
- #endif
}
/* this function TX data frames when the ieee80211 stack requires this.
atomic_dec(&priv->tx_pending[queue_index]);
}
-#if 0 //we need to send zero byte packet just after 512 byte(64 byte)packet is transmitted, or we will halt. It will greatly reduced available page in FW, and ruin our throughput. WB 2008.08.27
- if(BufLen > 0 && ((BufLen % 512 == 0)||(BufLen % 64 == 0))) {
- bToSend0Byte = true;
- }
-
- bToSend0Byte = false;
- //
- // Note that, we at most handle 1 MPDU to send here, either
- // fragment or MPDU in wait queue.
- //
- if(!bToSend0Byte)
-#endif
{
//
// Handle HW Beacon:
// We had transfer our beacon frame to host controler at this moment.
//
-#if 0
- if(tcb_desc->tx_queue == BEACON_QUEUE)
- {
- priv->bSendingBeacon = FALSE;
- }
-#endif
//
// Caution:
// Handling the wait queue of command packets.
}
}
}
-
-#if 0
- else
- {
- RT_TRACE( COMP_SEND,"HalUsbOutComplete(%d): bToSend0Byte.\n", PipeIndex);
-
- //
- // In this case, we don't return skb now.
- // It will be returned when the 0-byte request completed.
- //
-
- //
- // Bulk out an 0-byte padding transfer.
- //
- HalUsbOut0Byte(pAdapter, PipeIndex, skb);
- }
-
-#endif
}
void rtl8192_beacon_stop(struct net_device *dev)
#if 1
void rtl819xusb_beacon_tx(struct net_device *dev,u16 tx_rate)
{
-
-#if 0
- struct r8192_priv *priv = ieee80211_priv(dev);
- struct sk_buff *skb;
- int i = 0;
- //u8 cr;
-
- rtl8192_net_update(dev);
-
- skb = ieee80211_get_beacon(priv->ieee80211);
- if(!skb){
- DMESG("not enought memory for allocating beacon");
- return;
- }
-
-
- write_nic_byte(dev, BQREQ, read_nic_byte(dev, BQREQ) | (1<<7));
-
- i=0;
- //while(!read_nic_byte(dev,BQREQ & (1<<7)))
- while( (read_nic_byte(dev, BQREQ) & (1<<7)) == 0 )
- {
- msleep_interruptible_rtl(HZ/2);
- if(i++ > 10){
- DMESGW("get stuck to wait HW beacon to be ready");
- return ;
- }
- }
- skb->cb[0] = NORM_PRIORITY;
- skb->cb[1] = 0; //morefragment = 0
- skb->cb[2] = ieeerate2rtlrate(tx_rate);
-
- rtl8192_tx(dev,skb);
-
-#endif
}
#endif
inline u8 rtl8192_IsWirelessBMode(u16 rate)
void rtl819xU_cmd_isr(struct urb *tx_cmd_urb, struct pt_regs *regs)
{
-#if 0
- struct net_device *dev = (struct net_device*)tx_cmd_urb->context;
- struct r8192_priv *priv = ieee80211_priv(dev);
- int last_init_packet = 0;
- u8 *ptr_cmd_buf;
- u16 cmd_buf_len;
-
- if(tx_cmd_urb->status != 0) {
- priv->pFirmware.firmware_seg_index = 0; //only begin transter, should it can be set to 1
- }
-
- /* Free the urb and the corresponding buf for common Tx cmd packet, or
- * last segment of each firmware img.
- */
- if((priv->pFirmware.firmware_seg_index == 0) ||(priv->pFirmware.firmware_seg_index == priv->pFirmware.firmware_seg_maxnum)) {
- priv->pFirmware.firmware_seg_index = 0;//only begin transter, should it can be set to 1
- } else {
- /* prepare for last transfer */
- /* update some infomation for */
- /* last segment of the firmware img need indicate to device */
- priv->pFirmware.firmware_seg_index++;
- if(priv->pFirmware.firmware_seg_index == priv->pFirmware.firmware_seg_maxnum) {
- last_init_packet = 1;
- }
-
- cmd_buf_len = priv->pFirmware.firmware_seg_container[priv->pFirmware.firmware_seg_index-1].seg_size;
- ptr_cmd_buf = priv->pFfirmware.firmware_seg_container[priv->pFfirmware.firmware_seg_index-1].seg_ptr;
- rtl819xU_tx_cmd(dev, ptr_cmd_buf, cmd_buf_len, last_init_packet, DESC_PACKET_TYPE_INIT);
- }
-
- kfree(tx_cmd_urb->transfer_buffer);
-#endif
usb_free_urb(tx_cmd_urb);
}
u16 MPDUOverhead = 0;
//RT_DEBUG_DATA(COMP_SEND, tcb_desc, sizeof(cb_desc));
-#if 0
- /* Added by Annie for filling Len_Adjust field. 2005-12-14. */
- RT_ENC_ALG EncAlg = NO_Encryption;
-#endif
-
-
pend = atomic_read(&priv->tx_pending[tcb_desc->queue_index]);
/* we are locked here so the two atomic_read and inc are executed
* without interleaves * !!! For debug purpose */
//tx_desc->SecCAMID= 0;//92su del
tx_desc->RaBRSRID= tcb_desc->RATRIndex;
//#ifdef RTL8192S_PREPARE_FOR_NORMAL_RELEASE
-#if 0//LZM 090219
- tx_desc->RaBRSRID= 1;
-#endif
-#if 0
- /* Fill security related */
- if( pTcb->bEncrypt && !Adapter->MgntInfo.SecurityInfo.SWTxEncryptFlag)
- {
- EncAlg = SecGetEncryptionOverhead(
- Adapter,
- &EncryptionMPDUHeadOverhead,
- &EncryptionMPDUTailOverhead,
- NULL,
- NULL,
- FALSE,
- FALSE);
- //2004/07/22, kcwu, EncryptionMPDUHeadOverhead has been added in previous code
- //MPDUOverhead = EncryptionMPDUHeadOverhead + EncryptionMPDUTailOverhead;
- MPDUOverhead = EncryptionMPDUTailOverhead;
- tx_desc->NoEnc = 0;
- RT_TRACE(COMP_SEC, DBG_LOUD, ("******We in the loop SecCAMID is %d SecDescAssign is %d The Sec is %d********\n",tx_desc->SecCAMID,tx_desc->SecDescAssign,EncAlg));
- //CamDumpAll(Adapter);
- }
- else
-#endif
{
MPDUOverhead = 0;
//tx_desc->NoEnc = 1;//92su del
}
-#if 0
- switch(EncAlg){
- case NO_Encryption:
- tx_desc->SecType = 0x0;
- break;
- case WEP40_Encryption:
- case WEP104_Encryption:
- tx_desc->SecType = 0x1;
- break;
- case TKIP_Encryption:
- tx_desc->SecType = 0x2;
- break;
- case AESCCMP_Encryption:
- tx_desc->SecType = 0x3;
- break;
- default:
- tx_desc->SecType = 0x0;
- break;
- }
-#else
+
tx_desc->SecType = 0x0;
-#endif
+
if (tcb_desc->bHwSec)
{
switch (priv->ieee80211->pairwise_key_type)
/* Fill fields that are required to be initialized in all of the descriptors */
//DWORD 0
-#if 0
- tx_desc->FirstSeg = (tcb_desc->bFirstSeg)? 1:0;
- tx_desc->LastSeg = (tcb_desc->bLastSeg)?1:0;
-#else
tx_desc->FirstSeg = 1;
tx_desc->LastSeg = 1;
-#endif
tx_desc->OWN = 1;
{
tx_desc->TxBufferSize = (u32)(skb->len);//92su mod FIXLZM
}
-#if 0
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(1)TxFillDescriptor8192SUsb(): DataRate(%#x)\n", pTcb->DataRate));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(2)TxFillDescriptor8192SUsb(): bTxUseDriverAssingedRate(%#x)\n", pTcb->bTxUseDriverAssingedRate));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(3)TxFillDescriptor8192SUsb(): bAMPDUEnable(%d)\n", pTcb->bAMPDUEnable));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(4)TxFillDescriptor8192SUsb(): bRTSEnable(%d)\n", pTcb->bRTSEnable));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(5)TxFillDescriptor8192SUsb(): RTSRate(%#x)\n", pTcb->RTSRate));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(6)TxFillDescriptor8192SUsb(): bCTSEnable(%d)\n", pTcb->bCTSEnable));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(7)TxFillDescriptor8192SUsb(): bUseShortGI(%d)\n", pTcb->bUseShortGI));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(8)TxFillDescriptor8192SUsb(): bPacketBW(%d)\n", pTcb->bPacketBW));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(9)TxFillDescriptor8192SUsb(): CurrentChannelBW(%d)\n", pHalData->CurrentChannelBW));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(10)TxFillDescriptor8192SUsb(): bTxDisableRateFallBack(%d)\n", pTcb->bTxDisableRateFallBack));
- RT_TRACE(COMP_FPGA, DBG_LOUD, ("(11)TxFillDescriptor8192SUsb(): RATRIndex(%d)\n", pTcb->RATRIndex));
-#endif
-
/* Get index to out pipe from specified QueueID */
idx_pipe = txqueue2outpipe(priv,tcb_desc->queue_index);
//printk("=============>%s queue_index:%d, outpipe:%d\n", __func__,tcb_desc->queue_index,priv->RtOutPipes[idx_pipe]);
}
}
-#if 0
-void rtl8192_set_rate(struct net_device *dev)
-{
- int i;
- u16 word;
- int basic_rate,min_rr_rate,max_rr_rate;
-
-// struct r8192_priv *priv = ieee80211_priv(dev);
-
- //if (ieee80211_is_54g(priv->ieee80211->current_network) &&
-// priv->ieee80211->state == IEEE80211_LINKED){
- basic_rate = ieeerate2rtlrate(240);
- min_rr_rate = ieeerate2rtlrate(60);
- max_rr_rate = ieeerate2rtlrate(240);
-
-//
-// }else{
-// basic_rate = ieeerate2rtlrate(20);
-// min_rr_rate = ieeerate2rtlrate(10);
-// max_rr_rate = ieeerate2rtlrate(110);
-// }
-
- write_nic_byte(dev, RESP_RATE,
- max_rr_rate<<MAX_RESP_RATE_SHIFT| min_rr_rate<<MIN_RESP_RATE_SHIFT);
-
- //word = read_nic_word(dev, BRSR);
- word = read_nic_word(dev, BRSR_8187);
- word &= ~BRSR_MBR_8185;
-
-
- for(i=0;i<=basic_rate;i++)
- word |= (1<<i);
-
- //write_nic_word(dev, BRSR, word);
- write_nic_word(dev, BRSR_8187, word);
- //DMESG("RR:%x BRSR: %x", read_nic_byte(dev,RESP_RATE), read_nic_word(dev,BRSR));
-}
-#endif
-
-
-void rtl8192SU_net_update(struct net_device *dev)
+void rtl8192SU_net_update(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
&network->qos_data.parameters,\
sizeof(struct ieee80211_qos_parameters));
priv->ieee80211->current_network.qos_data.active = 1;
-#if 0
- if((priv->ieee80211->current_network.qos_data.param_count != \
- network->qos_data.param_count))
-#endif
{
set_qos_param = 1;
/* update qos parameter for current network */
return true;
}
-#if 0
- //In here we discuss with SD4 David. He think we still can send TKIP in broadcast group key in MCS rate.
- //We can't force in G mode if Pairwie key is AES and group key is TKIP
- if((pSecInfo->GroupEncAlgorithm == WEP104_Encryption) || (pSecInfo->GroupEncAlgorithm == WEP40_Encryption) ||
- (pSecInfo->PairwiseEncAlgorithm == WEP104_Encryption) ||
- (pSecInfo->PairwiseEncAlgorithm == WEP40_Encryption) || (pSecInfo->PairwiseEncAlgorithm == TKIP_Encryption))
- {
- return false;
- }
- else
- return true;
-#endif
return true;
#endif
}
}
return 1;
}
-#if 0
-void rtl8192_rq_tx_ack(struct net_device *dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- priv->ieee80211->ack_tx_to_ieee = 1;
-}
-#endif
+
void rtl8192_hw_sleep_down(struct net_device *dev)
{
RT_TRACE(COMP_POWER, "%s()============>come to sleep down\n", __FUNCTION__);
priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
- for(i=0; i<5; i++)
- priv->EEPROMUsbPhyParam[i] = EEPROM_USB_Default_PHY_PARAM;
-
- //RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("EFUSE USB PHY Param: \n"), priv->EEPROMUsbPhyParam, 5);
-
- {
- //<Roger_Notes> In this case, we random assigh MAC address here. 2008.10.15.
- static u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
- u8 i;
-
- //sMacAddr[5] = (u8)GetRandomNumber(1, 254);
-
- for(i = 0; i < 6; i++)
- dev->dev_addr[i] = sMacAddr[i];
- }
- //NicIFSetMacAddress(Adapter, Adapter->PermanentAddress);
- write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
- write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
-
- RT_TRACE(COMP_INIT, "ReadAdapterInfo8192SEFuse(), Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n",
- dev->dev_addr[0], dev->dev_addr[1],
- dev->dev_addr[2], dev->dev_addr[3],
- dev->dev_addr[4], dev->dev_addr[5]);
-
- priv->EEPROMBoardType = EEPROM_Default_BoardType;
- priv->rf_type = RF_1T2R; //RF_2T2R
- priv->EEPROMTxPowerDiff = EEPROM_Default_PwDiff;
- priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
- priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
- priv->EEPROMTxPwrBase = EEPROM_Default_TxPowerBase;
- priv->EEPROMTSSI_A = EEPROM_Default_TSSI;
- priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
- priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
-
-
-
- for (rf_path = 0; rf_path < 2; rf_path++)
- {
- for (i = 0; i < 3; i++)
- {
- // Read CCK RF A & B Tx power
- priv->RfCckChnlAreaTxPwr[rf_path][i] =
- priv->RfOfdmChnlAreaTxPwr1T[rf_path][i] =
- priv->RfOfdmChnlAreaTxPwr2T[rf_path][i] =
- (u8)(EEPROM_Default_TxPower & 0xff);
- }
- }
-
- for (i = 0; i < 3; i++)
- {
- //RT_TRACE((COMP_EFUSE), "CCK RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
- //priv->RfCckChnlAreaTxPwr[rf_path][i]);
- //RT_TRACE((COMP_EFUSE), "OFDM-1T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
- //priv->RfOfdmChnlAreaTxPwr1T[rf_path][i]);
- //RT_TRACE((COMP_EFUSE), "OFDM-2T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
- //priv->RfOfdmChnlAreaTxPwr2T[rf_path][i]);
- }
-
- // Assign dedicated channel tx power
- for(i=0; i<14; i++) // channel 1~3 use the same Tx Power Level.
- {
- if (i < 3) // Cjanel 1-3
- index = 0;
- else if (i < 9) // Channel 4-9
- index = 1;
- else // Channel 10-14
- index = 2;
-
- // Record A & B CCK /OFDM - 1T/2T Channel area tx power
- priv->RfTxPwrLevelCck[rf_path][i] =
- priv->RfCckChnlAreaTxPwr[rf_path][index];
- priv->RfTxPwrLevelOfdm1T[rf_path][i] =
- priv->RfOfdmChnlAreaTxPwr1T[rf_path][index];
- priv->RfTxPwrLevelOfdm2T[rf_path][i] =
- priv->RfOfdmChnlAreaTxPwr2T[rf_path][index];
- }
-
- for(i=0; i<14; i++)
- {
- //RT_TRACE((COMP_EFUSE), "Rf-%d TxPwr CH-%d CCK OFDM_1T OFDM_2T= 0x%x/0x%x/0x%x\n",
- //rf_path, i, priv->RfTxPwrLevelCck[0][i],
- //priv->RfTxPwrLevelOfdm1T[0][i] ,
- //priv->RfTxPwrLevelOfdm2T[0][i] );
- }
-
- //
- // Update remained HAL variables.
- //
- priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
- priv->LegacyHTTxPowerDiff = priv->EEPROMTxPowerDiff;//new
- priv->TxPowerDiff = priv->EEPROMTxPowerDiff;
- //priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);// Antenna B gain offset to antenna A, bit0~3
- //priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);// Antenna C gain offset to antenna A, bit4~7
- priv->CrystalCap = priv->EEPROMCrystalCap; // CrystalCap, bit12~15
- priv->ThermalMeter[0] = priv->EEPROMThermalMeter;// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
- priv->LedStrategy = SW_LED_MODE0;
-
- init_rate_adaptive(dev);
-
- RT_TRACE(COMP_INIT, "<==== ConfigAdapterInfo8192SForAutoLoadFail\n");
-
-}
-
-#if 0
-static void rtl8192SU_ReadAdapterInfo8192SEEPROM(struct net_device* dev)
-{
- u16 EEPROMId = 0;
- u8 bLoad_From_EEPOM = false;
- struct r8192_priv *priv = ieee80211_priv(dev);
- u16 tmpValue = 0;
- u8 tmpBuffer[30];
- int i;
-
- RT_TRACE(COMP_EPROM, "===========>%s()\n", __FUNCTION__);
-
-
- write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
- udelay(10000);
- write_nic_byte(dev, PMC_FSM, 0x02); // Enable Loader Data Keep
-
-
- EEPROMId = eprom_read(dev, 0); //first read EEPROM ID out;
- RT_TRACE(COMP_EPROM, "EEPROM ID is 0x%x\n", EEPROMId);
-
- if (EEPROMId != RTL8190_EEPROM_ID)
- {
- priv->AutoloadFailFlag = true;
- RT_TRACE(COMP_ERR, "EEPROM ID is invalid(is 0x%x(should be 0x%x)\n", EEPROMId, RTL8190_EEPROM_ID);
- }
- else
- {
- priv->AutoloadFailFlag = false;
- bLoad_From_EEPOM = true;
- }
-
- if (bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (EEPROM_VID>>1));
- priv->eeprom_vid = endian_swap(&tmpValue);
- priv->eeprom_pid = eprom_read(dev, (EEPROM_PID>>1));
-
- // Version ID, Channel plan
- tmpValue = eprom_read(dev, (EEPROM_Version>>1));
- //pHalData->card_8192_version = (VERSION_8192S)((usValue&0x00ff));
- priv->eeprom_ChannelPlan =(tmpValue&0xff00)>>8;
- priv->bTXPowerDataReadFromEEPORM = true;
-
- // Customer ID, 0x00 and 0xff are reserved for Realtek.
- tmpValue = eprom_read(dev, (u16)(EEPROM_CustomID>>1)) ;
- priv->eeprom_CustomerID = (u8)( tmpValue & 0xff);
- priv->eeprom_SubCustomerID = (u8)((tmpValue & 0xff00)>>8);
- }
- else
- {
- priv->eeprom_vid = 0;
- priv->eeprom_pid = 0;
- //priv->card_8192_version = VERSION_8192SU_A;
- priv->eeprom_ChannelPlan = 0;
- priv->eeprom_CustomerID = 0;
- priv->eeprom_SubCustomerID = 0;
- }
- RT_TRACE(COMP_EPROM, "vid:0x%4x, pid:0x%4x, CustomID:0x%2x, ChanPlan:0x%x\n", priv->eeprom_vid, priv->eeprom_pid, priv->eeprom_CustomerID, priv->eeprom_ChannelPlan);
- //set channelplan from eeprom
- priv->ChannelPlan = priv->eeprom_ChannelPlan;// FIXLZM
-
- RT_TRACE(COMP_INIT, "EEPROMId = 0x%4x\n", EEPROMId);
- RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
- RT_TRACE(COMP_INIT, "EEPROM PID = 0x%4x\n", priv->eeprom_pid);
- //RT_TRACE(COMP_INIT, DBG_LOUD, ("EEPROM Version ID: 0x%2x\n", pHalData->VersionID));
- RT_TRACE(COMP_INIT, "EEPROM Customer ID: 0x%2x\n", priv->eeprom_CustomerID);
- RT_TRACE(COMP_INIT, "EEPROM SubCustomer ID: 0x%2x\n", priv->eeprom_SubCustomerID);
- RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n", priv->eeprom_ChannelPlan);
-
- // Read USB optional function.
- if(bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (EEPROM_USB_OPTIONAL>>1));
- priv->EEPROMUsbOption = (u8)(tmpValue&0xff);
- }
- else
- {
- priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
- }
-
- RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
-
-
- if (bLoad_From_EEPOM)
- {
- int i;
- for (i=0; i<6; i+=2)
- {
- u16 tmp = 0;
- tmp = eprom_read(dev, (u16)((EEPROM_NODE_ADDRESS_BYTE_0 + i)>>1));
- *(u16*)(&dev->dev_addr[i]) = tmp;
- }
- }
- else
- {
- //<Roger_Notes> In this case, we random assigh MAC address here. 2008.10.15.
- static u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
- u8 i;
-
- //sMacAddr[5] = (u8)GetRandomNumber(1, 254);
-
- for(i = 0; i < 6; i++)
- dev->dev_addr[i] = sMacAddr[i];
-
- //memcpy(dev->dev_addr, sMacAddr, 6);
- //should I set IDR0 here?
- }
- write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
- write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
- RT_TRACE(COMP_EPROM, "MAC addr:"MAC_FMT"\n", MAC_ARG(dev->dev_addr));
-
- priv->rf_type = RTL819X_DEFAULT_RF_TYPE; //default 1T2R
- priv->rf_chip = RF_6052;
- priv->rf_type = RTL819X_DEFAULT_RF_TYPE;
- //priv->card_8192_version = VERSION_8192SU_A; //Over write for temporally experiment. 2008.10.16. By Roger.
-
- {
-#if 0
- if(bLoad_From_EEPOM)
- {
- tempval = (ReadEEprom(Adapter, (EEPROM_RFInd_PowerDiff>>1))) & 0xff;
- if (tempval&0x80) //RF-indication, bit[7]
- pHalData->RF_Type = RF_1T2R;
- else
- pHalData->RF_Type = RF_2T4R;
- }
-#endif
-
- priv->EEPROMTxPowerDiff = EEPROM_Default_TxPowerDiff;
- RT_TRACE(COMP_INIT, "TxPowerDiff = %#x\n", priv->EEPROMTxPowerDiff);
-
-
- //
- // Read antenna tx power offset of B/C/D to A from EEPROM
- // and read ThermalMeter from EEPROM
- //
- if(bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (EEPROM_PwDiff>>1));
- priv->EEPROMPwDiff = tmpValue&0x00ff;
- priv->EEPROMThermalMeter = (tmpValue&0xff00)>>8;
- }
- else
- {
- priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
- priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
- }
- RT_TRACE(COMP_INIT, "PwDiff = %#x\n", priv->EEPROMPwDiff);
- RT_TRACE(COMP_INIT, "ThermalMeter = %#x\n", priv->EEPROMThermalMeter);
-
- priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
-
-
- // Read CrystalCap from EEPROM
- if(bLoad_From_EEPOM)
- {
- priv->EEPROMCrystalCap =(u8) (((eprom_read(dev, (EEPROM_CrystalCap>>1)))&0xf000)>>12);
- }
- else
- {
- priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
- }
- RT_TRACE(COMP_INIT, "CrystalCap = %#x\n", priv->EEPROMCrystalCap);
-
-
- //if(pHalData->EEPROM_Def_Ver == 0) // old eeprom definition
- {
-
- //
- // Get Tx Power Base.//===>
- //
- if(bLoad_From_EEPOM)
- {
- priv->EEPROMTxPwrBase =(u8) ((eprom_read(dev, (EEPROM_TxPowerBase>>1)))&0xff);
- }
- else
- {
- priv->EEPROMTxPwrBase = EEPROM_Default_TxPowerBase;
- }
-
- RT_TRACE(COMP_INIT, "TxPwrBase = %#x\n", priv->EEPROMTxPwrBase);
-
- //
- // Get CustomerID(Boad Type)
- // i.e., 0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU.
- // Others: Reserved. Default is 0x2: RTL8192SU.
- //
- if(bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (u16) (EEPROM_BoardType>>1));
- priv->EEPROMBoardType = (u8)(tmpValue&0xff);
- }
- else
- {
- priv->EEPROMBoardType = EEPROM_Default_BoardType;
- }
-
- RT_TRACE(COMP_INIT, "BoardType = %#x\n", priv->EEPROMBoardType);
-
- // Please add code in the section!!!!
- // And merge tx power difference section.
-
- //
- // Get TSSI value for each path.
- //
- if(bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (u16) ((EEPROM_TSSI_A)>>1));
- priv->EEPROMTSSI_A = (u8)((tmpValue&0xff00)>>8);
- }
- else
- { // Default setting for Empty EEPROM
- priv->EEPROMTSSI_A = EEPROM_Default_TSSI;
- }
-
- if(bLoad_From_EEPOM)
- {
- tmpValue = eprom_read(dev, (u16) ((EEPROM_TSSI_B)>>1));
- priv->EEPROMTSSI_B = (u8)(tmpValue&0xff);
- priv->EEPROMTxPwrTkMode = (u8)((tmpValue&0xff00)>>8);
- }
- else
- { // Default setting for Empty EEPROM
- priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
- priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
- }
-
- RT_TRACE(COMP_INIT, "TSSI_A = %#x, TSSI_B = %#x\n", priv->EEPROMTSSI_A, priv->EEPROMTSSI_B);
- RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode);
-
-
- }
-
-
- priv->TxPowerDiff = priv->EEPROMPwDiff;
- // Antenna B gain offset to antenna A, bit0~3
- priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
- // Antenna C gain offset to antenna A, bit4~7
- priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);
- // CrystalCap, bit12~15
- priv->CrystalCap = priv->EEPROMCrystalCap;
- // ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
- // 92U does not enable TX power tracking.
- priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
- }
-
- priv->LedStrategy = SW_LED_MODE0;
-
- if(priv->rf_type == RF_1T2R)
- {
- RT_TRACE(COMP_EPROM, "\n1T2R config\n");
- }
- else
- {
- RT_TRACE(COMP_EPROM, "\n2T4R config\n");
- }
-
- // 2008/01/16 MH We can only know RF type in the function. So we have to init
- // DIG RATR table again.
- init_rate_adaptive(dev);
- //we need init DIG RATR table here again.
-
- RT_TRACE(COMP_EPROM, "<===========%s()\n", __FUNCTION__);
- return;
-}
-
-//
-// Description:
-// 1. Read HW adapter information by E-Fuse.
-// 2. Refered from SD1 Richard.
-//
-// Assumption:
-// 1. Boot from E-Fuse and CR9346 regiser has verified.
-// 2. PASSIVE_LEVEL (USB interface)
-//
-// Created by Roger, 2008.10.21.
-//
-void
-rtl8192SU_ReadAdapterInfo8192SEFuse(struct net_device* dev)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- u16 i,usValue;
- u16 EEPROMId;
- u8 readbyte;
- u8 OFDMTxPwr[14];
- u8 CCKTxPwr[14];
- u8 HT2T_TxPwr[6];
- u8 UsbPhyParam[5];
- u8 hwinfo[HWSET_MAX_SIZE_92S];
-
-
- RT_TRACE(COMP_INIT, "====> ReadAdapterInfo8192SEFuse\n");
-
- //
- // <Roger_Notes> We set Isolation signals from Loader and reset EEPROM after system resuming
- // from suspend mode.
- // 2008.10.21.
- //
- write_nic_byte(dev, SYS_ISO_CTRL+1, 0xE8); // Isolation signals from Loader
- //PlatformStallExecution(10000);
- mdelay(10);
- write_nic_byte(dev, SYS_FUNC_EN+1, 0x40);
- write_nic_byte(dev, SYS_FUNC_EN+1, 0x50);
-
- readbyte = read_nic_byte(dev, EFUSE_TEST+3);
- write_nic_byte(dev, EFUSE_TEST+3, (readbyte | 0x80));
- write_nic_byte(dev, EFUSE_TEST+3, 0x72);
- write_nic_byte(dev, EFUSE_CLK, 0x03);
-
- //
- // Dump EFUSe at init time for later use
- //
- // Read EFUSE real map to shadow!!
- EFUSE_ShadowMapUpdate(dev);
-
- memcpy(hwinfo, (void*)&priv->EfuseMap[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE_92S);
- //RT_PRINT_DATA(COMP_INIT, DBG_LOUD, ("MAP \n"), hwinfo, HWSET_MAX_SIZE_92S);
-
- //
- // <Roger_Notes> Event though CR9346 regiser can verify whether Autoload is success or not, but we still
- // double check ID codes for 92S here(e.g., due to HW GPIO polling fail issue).
- // 2008.10.21.
- //
- ReadEFuse(dev, 0, 2, (unsigned char*) &EEPROMId);
-
- if( EEPROMId != RTL8190_EEPROM_ID )
- {
- RT_TRACE(COMP_INIT, "EEPROM ID(%#x) is invalid!!\n", EEPROMId);
- priv->AutoloadFailFlag=true;
- }
- else
- {
- priv->AutoloadFailFlag=false;
- }
-
- // Read IC Version && Channel Plan
- if(!priv->AutoloadFailFlag)
- {
-
- // VID, PID
- ReadEFuse(dev, EEPROM_VID, 2, (unsigned char*) &priv->eeprom_vid);
- ReadEFuse(dev, EEPROM_PID, 2, (unsigned char*) &priv->eeprom_pid);
-
- // Version ID, Channel plan
- ReadEFuse(dev, EEPROM_Version, 2, (unsigned char*) &usValue);
- //pHalData->VersionID = (VERSION_8192S)(usValue&0x00ff);
- priv->eeprom_ChannelPlan = (usValue&0xff00>>8);
- priv->bTXPowerDataReadFromEEPORM = true;
-
- // Customer ID, 0x00 and 0xff are reserved for Realtek.
- ReadEFuse(dev, EEPROM_CustomID, 2, (unsigned char*) &usValue);
- priv->eeprom_CustomerID = (u8)( usValue & 0xff);
- priv->eeprom_SubCustomerID = (u8)((usValue & 0xff00)>>8);
- }
- else
- {
- priv->eeprom_vid = 0;
- priv->eeprom_pid = 0;
- priv->eeprom_ChannelPlan = 0;
- priv->eeprom_CustomerID = 0;
- priv->eeprom_SubCustomerID = 0;
- }
-
- RT_TRACE(COMP_INIT, "EEPROM Id = 0x%4x\n", EEPROMId);
- RT_TRACE(COMP_INIT, "EEPROM VID = 0x%4x\n", priv->eeprom_vid);
- RT_TRACE(COMP_INIT, "EEPROM PID = 0x%4x\n", priv->eeprom_pid);
- //RT_TRACE(COMP_INIT, DBG_LOUD, ("EEPROM Version ID: 0x%2x\n", pHalData->VersionID));
- RT_TRACE(COMP_INIT, "EEPROM Customer ID: 0x%2x\n", priv->eeprom_CustomerID);
- RT_TRACE(COMP_INIT, "EEPROM SubCustomer ID: 0x%2x\n", priv->eeprom_SubCustomerID);
- RT_TRACE(COMP_INIT, "EEPROM ChannelPlan = 0x%4x\n", priv->eeprom_ChannelPlan);
-
-
- // Read USB optional function.
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_USB_OPTIONAL, 1, (unsigned char*) &priv->EEPROMUsbOption);
- }
- else
- {
- priv->EEPROMUsbOption = EEPROM_USB_Default_OPTIONAL_FUNC;
- }
-
- RT_TRACE(COMP_INIT, "USB Option = %#x\n", priv->EEPROMUsbOption);
-
-
- // Read USB PHY parameters.
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_USB_PHY_PARA1, 5, (unsigned char*)UsbPhyParam);
- for(i=0; i<5; i++)
- {
- priv->EEPROMUsbPhyParam[i] = UsbPhyParam[i];
- RT_TRACE(COMP_INIT, "USB Param = index(%d) = %#x\n", i, priv->EEPROMUsbPhyParam[i]);
- }
- }
- else
- {
- for(i=0; i<5; i++)
- {
- priv->EEPROMUsbPhyParam[i] = EEPROM_USB_Default_PHY_PARAM;
- RT_TRACE(COMP_INIT, "USB Param = index(%d) = %#x\n", i, priv->EEPROMUsbPhyParam[i]);
- }
- }
-
-
- //Read Permanent MAC address
- if(!priv->AutoloadFailFlag)
- {
- u8 macaddr[6] = {0x00, 0xe1, 0x86, 0x4c, 0x92, 0x00};
+ for(i=0; i<5; i++)
+ priv->EEPROMUsbPhyParam[i] = EEPROM_USB_Default_PHY_PARAM;
- ReadEFuse(dev, EEPROM_NODE_ADDRESS_BYTE_0, 6, (unsigned char*)macaddr);
- for(i=0; i<6; i++)
- dev->dev_addr[i] = macaddr[i];
- }
- else
- {//Auto load fail
+ //RT_PRINT_DATA(COMP_INIT|COMP_EFUSE, DBG_LOUD, ("EFUSE USB PHY Param: \n"), priv->EEPROMUsbPhyParam, 5);
- //<Roger_Notes> In this case, we random assigh MAC address here. 2008.10.15.
+ {
+ //<Roger_Notes> In this case, we random assigh MAC address here. 2008.10.15.
static u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x92, 0x00};
u8 i;
- //if(!Adapter->bInHctTest)
- //sMacAddr[5] = (u8)GetRandomNumber(1, 254);
+ //sMacAddr[5] = (u8)GetRandomNumber(1, 254);
for(i = 0; i < 6; i++)
dev->dev_addr[i] = sMacAddr[i];
}
-
//NicIFSetMacAddress(Adapter, Adapter->PermanentAddress);
write_nic_dword(dev, IDR0, ((u32*)dev->dev_addr)[0]);
write_nic_word(dev, IDR4, ((u16*)(dev->dev_addr + 4))[0]);
dev->dev_addr[2], dev->dev_addr[3],
dev->dev_addr[4], dev->dev_addr[5]);
- // 2007/11/15 MH For RTL8192USB we assign as 1T2R now.
- priv->rf_type = RTL819X_DEFAULT_RF_TYPE; // default : 1T2R
-
- priv->rf_chip = RF_6052;
- priv->rf_type = RTL819X_DEFAULT_RF_TYPE;
-
- {
- //
- // Read antenna tx power offset of B/C/D to A from EEPROM
- // and read ThermalMeter from EEPROM
- //
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_PwDiff, 2, (unsigned char*) &usValue);
- priv->EEPROMPwDiff = usValue&0x00ff;
- priv->EEPROMThermalMeter = (usValue&0xff00)>>8;
- }
- else
- {
- priv->EEPROMPwDiff = EEPROM_Default_PwDiff;
- priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
- }
+ priv->EEPROMBoardType = EEPROM_Default_BoardType;
+ priv->rf_type = RF_1T2R; //RF_2T2R
+ priv->EEPROMTxPowerDiff = EEPROM_Default_PwDiff;
+ priv->EEPROMThermalMeter = EEPROM_Default_ThermalMeter;
+ priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
+ priv->EEPROMTxPwrBase = EEPROM_Default_TxPowerBase;
+ priv->EEPROMTSSI_A = EEPROM_Default_TSSI;
+ priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
+ priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
- RT_TRACE(COMP_INIT, "PwDiff = %#x\n", priv->EEPROMPwDiff);
- RT_TRACE(COMP_INIT, "ThermalMeter = %#x\n", priv->EEPROMThermalMeter);
- priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
- //
- // Read Tx Power gain offset of legacy OFDM to HT rate.
- // Read CrystalCap from EEPROM
- //
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_CrystalCap, 1, (unsigned char*) &usValue);
- priv->EEPROMCrystalCap = (u8)((usValue&0xf0)>>4);
- }
- else
+ for (rf_path = 0; rf_path < 2; rf_path++)
+ {
+ for (i = 0; i < 3; i++)
{
- priv->EEPROMCrystalCap = EEPROM_Default_CrystalCap;
+ // Read CCK RF A & B Tx power
+ priv->RfCckChnlAreaTxPwr[rf_path][i] =
+ priv->RfOfdmChnlAreaTxPwr1T[rf_path][i] =
+ priv->RfOfdmChnlAreaTxPwr2T[rf_path][i] =
+ (u8)(EEPROM_Default_TxPower & 0xff);
}
+ }
- RT_TRACE(COMP_INIT, "CrystalCap = %#x\n", priv->EEPROMCrystalCap);
-
- priv->EEPROMTxPowerDiff = EEPROM_Default_TxPowerDiff;
- RT_TRACE(COMP_INIT, "TxPowerDiff = %d\n", priv->EEPROMTxPowerDiff);
-
+ for (i = 0; i < 3; i++)
+ {
+ //RT_TRACE((COMP_EFUSE), "CCK RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
+ //priv->RfCckChnlAreaTxPwr[rf_path][i]);
+ //RT_TRACE((COMP_EFUSE), "OFDM-1T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
+ //priv->RfOfdmChnlAreaTxPwr1T[rf_path][i]);
+ //RT_TRACE((COMP_EFUSE), "OFDM-2T RF-%d CHan_Area-%d = 0x%x\n", rf_path, i,
+ //priv->RfOfdmChnlAreaTxPwr2T[rf_path][i]);
+ }
- //
- // Get Tx Power Base.
- //
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_TxPowerBase, 1, (unsigned char*) &priv->EEPROMTxPwrBase );
- }
- else
+ // Assign dedicated channel tx power
+ for(i=0; i<14; i++) // channel 1~3 use the same Tx Power Level.
{
- priv->EEPROMTxPwrBase = EEPROM_Default_TxPowerBase;
- }
-
- RT_TRACE(COMP_INIT, "TxPwrBase = %#x\n", priv->EEPROMTxPwrBase);
+ if (i < 3) // Cjanel 1-3
+ index = 0;
+ else if (i < 9) // Channel 4-9
+ index = 1;
+ else // Channel 10-14
+ index = 2;
- //
- // Get CustomerID(Boad Type)
- // i.e., 0x0: RTL8188SU, 0x1: RTL8191SU, 0x2: RTL8192SU, 0x3: RTL8191GU.
- // Others: Reserved. Default is 0x2: RTL8192SU.
- //
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_BoardType, 1, (unsigned char*) &priv->EEPROMBoardType );
- }
- else
- {
- priv->EEPROMBoardType = EEPROM_Default_BoardType;
+ // Record A & B CCK /OFDM - 1T/2T Channel area tx power
+ priv->RfTxPwrLevelCck[rf_path][i] =
+ priv->RfCckChnlAreaTxPwr[rf_path][index];
+ priv->RfTxPwrLevelOfdm1T[rf_path][i] =
+ priv->RfOfdmChnlAreaTxPwr1T[rf_path][index];
+ priv->RfTxPwrLevelOfdm2T[rf_path][i] =
+ priv->RfOfdmChnlAreaTxPwr2T[rf_path][index];
}
- RT_TRACE(COMP_INIT, "BoardType = %#x\n", priv->EEPROMBoardType);
-
- //if(pHalData->EEPROM_Def_Ver == 0)
+ for(i=0; i<14; i++)
{
- // Please add code in the section!!!!
- // And merge tx power difference section.
-
- //
- // Get TSSI value for each path.
- //
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_TSSI_A, 2, (unsigned char*)&usValue);
- priv->EEPROMTSSI_A = (u8)(usValue&0xff);
- priv->EEPROMTSSI_B = (u8)((usValue&0xff00)>>8);
- }
- else
- { // Default setting for Empty EEPROM
- priv->EEPROMTSSI_A = EEPROM_Default_TSSI;
- priv->EEPROMTSSI_B = EEPROM_Default_TSSI;
- }
-
- RT_TRACE(COMP_INIT, "TSSI_A = %#x, TSSI_B = %#x\n",
- priv->EEPROMTSSI_A, priv->EEPROMTSSI_B);
-
- //
- // Get Tx Power tracking mode.
- //
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_TxPwTkMode, 1, (unsigned char*)&priv->EEPROMTxPwrTkMode);
- }
- else
- { // Default setting for Empty EEPROM
- priv->EEPROMTxPwrTkMode = EEPROM_Default_TxPwrTkMode;
- }
-
- RT_TRACE(COMP_INIT, "TxPwrTkMod = %#x\n", priv->EEPROMTxPwrTkMode);
-
-
- // TODO: The following HT 2T Path A and B Power Index should be updated.!! Added by Roger, 2008.20.23.
-
- //
- // Get HT 2T Path A and B Power Index.
- //
- if(!priv->AutoloadFailFlag)
- {
- ReadEFuse(dev, EEPROM_HT2T_CH1_A, 6, (unsigned char*)HT2T_TxPwr);
- for(i=0; i<6; i++)
- {
- priv->EEPROMHT2T_TxPwr[i] = HT2T_TxPwr[i];
- }
- }
- else
- { // Default setting for Empty EEPROM
- for(i=0; i<6; i++)
- {
- priv->EEPROMHT2T_TxPwr[i] = EEPROM_Default_HT2T_TxPwr;
- }
- }
-
- for(i=0; i<6; i++)
- {
- RT_TRACE(COMP_INIT, "EEPROMHT2T_TxPwr, Index %d = 0x%02x\n",
- i, priv->EEPROMHT2T_TxPwr[i]);
- }
+ //RT_TRACE((COMP_EFUSE), "Rf-%d TxPwr CH-%d CCK OFDM_1T OFDM_2T= 0x%x/0x%x/0x%x\n",
+ //rf_path, i, priv->RfTxPwrLevelCck[0][i],
+ //priv->RfTxPwrLevelOfdm1T[0][i] ,
+ //priv->RfTxPwrLevelOfdm2T[0][i] );
}
-
- priv->TxPowerDiff = priv->EEPROMPwDiff;
- // Antenna B gain offset to antenna A, bit0~3
- priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);
- // Antenna C gain offset to antenna A, bit4~7
- priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);
- // CrystalCap, bit12~15
- priv->CrystalCap = priv->EEPROMCrystalCap;
- // ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
- // 92U does not enable TX power tracking.
- priv->ThermalMeter[0] = priv->EEPROMThermalMeter;
- }
-
+ //
+ // Update remained HAL variables.
+ //
+ priv->TSSI_13dBm = priv->EEPROMThermalMeter *100;
+ priv->LegacyHTTxPowerDiff = priv->EEPROMTxPowerDiff;//new
+ priv->TxPowerDiff = priv->EEPROMTxPowerDiff;
+ //priv->AntennaTxPwDiff[0] = (priv->EEPROMTxPowerDiff & 0xf);// Antenna B gain offset to antenna A, bit0~3
+ //priv->AntennaTxPwDiff[1] = ((priv->EEPROMTxPowerDiff & 0xf0)>>4);// Antenna C gain offset to antenna A, bit4~7
+ priv->CrystalCap = priv->EEPROMCrystalCap; // CrystalCap, bit12~15
+ priv->ThermalMeter[0] = priv->EEPROMThermalMeter;// ThermalMeter, bit0~3 for RFIC1, bit4~7 for RFIC2
priv->LedStrategy = SW_LED_MODE0;
init_rate_adaptive(dev);
- RT_TRACE(COMP_INIT, "<==== ReadAdapterInfo8192SEFuse\n");
+ RT_TRACE(COMP_INIT, "<==== ConfigAdapterInfo8192SForAutoLoadFail\n");
}
-#endif
//
// Description:
RT_TRACE(COMP_INIT, "<---MacConfigBeforeFwDownloadASIC()\n");
}
-
-#if 0
-static void rtl8192SU_SetHwRegAmpduMinSpace(struct net_device *dev, u8 MinSpaceCfg)
-{
- struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
- struct ieee80211_device* ieee = priv->ieee80211;
- u8 MinSpacingToSet;
- u8 SecMinSpace;
-
- MinSpacingToSet = MinSpaceCfg;
- if(MinSpacingToSet <= 7)
- {
- switch(ieee->pairwise_key_type)
- {
- case KEY_TYPE_NA: SecMinSpace = 0; break;
- case KEY_TYPE_CCMP:
- case KEY_TYPE_WEP40:
- case KEY_TYPE_WEP104:
- case KEY_TYPE_TKIP: SecMinSpace = 6; break;
- default: SecMinSpace = 7; break;
- }
-
- if(MinSpacingToSet < SecMinSpace)
- MinSpacingToSet = SecMinSpace;
- priv->MinSpaceCfg = ((priv->MinSpaceCfg&0xf8) |MinSpacingToSet);
- RT_TRACE(COMP_SEC, "Set AMPDU_MIN_SPACE: %x\n", priv->MinSpaceCfg);
- write_nic_byte(dev, AMPDU_MIN_SPACE, priv->MinSpaceCfg);
- }
-
-}
-#endif
-
//
// Description:
// Initial HW relted registers.
//
//write_nic_dword(Adapter, 0xa0, 0x07070707); //BKQ, BEQ, VIQ and VOQ
//write_nic_byte(dev, 0xa4, 0x00); // HCCAQ
-#if 0 //LZM 090219
-#ifdef USE_SIX_USB_ENDPOINT
- //write_nic_dword(Adapter, 0xa5, 0x00000003); //CMDQ, MGTQ, HQ and BCNQ
- //write_nic_byte(dev, 0xa9, 0xdd); // PUBQ
- tmpU1b = read_nic_byte(dev, 0xab); // RQPN
- write_nic_byte(dev, 0xab, tmpU1b|BIT7|BIT6);// reduce to 6 endpoints.
-#else
- write_nic_dword(dev, 0xa5, 0x02030300); //CMDQ, MGTQ, HQ and BCNQ
- write_nic_byte(dev, 0xa9, 0xd8); // PUBQ
- tmpU1b = read_nic_byte(dev, 0xab); // RQPN
- write_nic_byte(dev, 0xab, (tmpU1b&(~BIT6))|BIT7); // Disable reduced endpoint.
-#endif
-#endif
-
// Fix the RX FIFO issue(USB error), Rivesed by Roger, 2008-06-14
tmpU1b = read_nic_byte_E(dev, 0x5C);
write_nic_byte_E(dev, 0x5C, tmpU1b|BIT7);
-#if 0 //LZM 090219
- //
- // Suggested by SD1 Alex, 2008-06-14.
- //
- write_nic_byte(dev, TXOP_STALL_CTRL, 0x80);//NAV
-
-
- //
- // Set Data Auto Rate Fallback Retry Count register.
- //
- write_nic_dword(dev, DARFRC, 0x04010000);
- write_nic_dword(dev, DARFRC+4, 0x09070605);
- write_nic_dword(dev, RARFRC, 0x04010000);
- write_nic_dword(dev, RARFRC+4, 0x09070605);
-
- // Set Data Auto Rate Fallback Reg. Added by Roger, 2008.09.22.
- for (i = 0; i < 8; i++)
- write_nic_dword(dev, ARFR0+i*4, 0x1f0ffff0);
-
- //
- // Set driver info, we only accept PHY status now.
- //
- //write_nic_byte(dev, RXDRVINFO_SZ, 4);
-
- //
- // Aggregation length limit. Revised by Roger. 2008.09.22.
- //
- write_nic_dword(dev, AGGLEN_LMT_L, 0x66666666); // Long GI
- write_nic_byte(dev, AGGLEN_LMT_H, 0x06); // Set AMPDU length to 12Kbytes for ShortGI case.
-
- //
- // For Min Spacing configuration.
- //
- //Adapter->HalFunc.SetHwRegHandler(Adapter, HW_VAR_AMPDU_MIN_SPACE, (u8*)(&Adapter->MgntInfo.MinSpaceCfg));
- rtl8192SU_SetHwRegAmpduMinSpace(dev,priv->MinSpaceCfg);
-#endif
-
// For EFUSE init configuration.
//if (IS_BOOT_FROM_EFUSE(Adapter)) // We may R/W EFUSE in EFUSE mode
if (priv->bBootFromEfuse)
write_nic_byte(dev, SECR, SECR_value);
}
-#if 0
-
- if(pHalData->VersionID == VERSION_8192SU_A)
- {
- // cosa add for tx power level initialization.
- GetTxPowerOriginalOffset(Adapter);
- SetTxPowerLevel819xUsb(Adapter, Channel);
- }
-#endif
-
-
#ifdef TO_DO_LIST
//PHY_UpdateInitialGain(dev);
// <Roger_Notes> We return status here for temporal FPGA verification. 2008.05.12.
//
-// The following IO was for FPGA verification purpose. Added by Roger, 2008.09.11.
-#if 0
- // 2008/08/19 MH From SD1 Jong, we must write some register for true PHY/MAC FPGA.
- write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x30);
- write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x30);
-
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
-
- //write_nic_dword(Adapter, RCR, 0x817FF02F);
-
- write_nic_dword(Adapter, rTxAGC_Mcs15_Mcs12, 0x06060606);
-#endif
end:
return rtStatus;
}
-/* this configures registers for beacon tx and enables it via
- * rtl8192_beacon_tx_enable(). rtl8192_beacon_tx_disable() might
- * be used to stop beacon transmission
- */
-#if 0
-void rtl8192_start_tx_beacon(struct net_device *dev)
-{
- int i;
- struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
- u16 word;
- DMESG("Enabling beacon TX");
- //write_nic_byte(dev, TX_CONF,0xe6);// TX_CONF
- //rtl8192_init_beacon(dev);
- //set_nic_txring(dev);
-// rtl8192_prepare_beacon(dev);
- rtl8192_irq_disable(dev);
-// rtl8192_beacon_tx_enable(dev);
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- //write_nic_byte(dev,0x9d,0x20); //DMA Poll
- //write_nic_word(dev,0x7a,0);
- //write_nic_word(dev,0x7a,0x8000);
-
-
- word = read_nic_word(dev, BcnItv);
- word &= ~BcnItv_BcnItv; // clear Bcn_Itv
- write_nic_word(dev, BcnItv, word);
-
- write_nic_word(dev, AtimWnd,
- read_nic_word(dev, AtimWnd) &~ AtimWnd_AtimWnd);
-
- word = read_nic_word(dev, BCN_INTR_ITV);
- word &= ~BCN_INTR_ITV_MASK;
-
- //word |= priv->ieee80211->beacon_interval *
- // ((priv->txbeaconcount > 1)?(priv->txbeaconcount-1):1);
- // FIXME:FIXME check if correct ^^ worked with 0x3e8;
-
- write_nic_word(dev, BCN_INTR_ITV, word);
-
- //write_nic_word(dev,0x2e,0xe002);
- //write_nic_dword(dev,0x30,0xb8c7832e);
- for(i=0; i<ETH_ALEN; i++)
- write_nic_byte(dev, BSSID+i, priv->ieee80211->beacon_cell_ssid[i]);
-
-// rtl8192_update_msr(dev);
-
-
- //write_nic_byte(dev,CONFIG4,3); /* !!!!!!!!!! */
-
- rtl8192_set_mode(dev, EPROM_CMD_NORMAL);
-
- rtl8192_irq_enable(dev);
-
- /* VV !!!!!!!!!! VV*/
- /*
- rtl8192_set_mode(dev,EPROM_CMD_CONFIG);
- write_nic_byte(dev,0x9d,0x00);
- rtl8192_set_mode(dev,EPROM_CMD_NORMAL);
-*/
-}
-#endif
/***************************************************************************
-------------------------------NET STUFF---------------------------
***************************************************************************/
//printk("===============>watch_dog timer\n");
queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0);
mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME));
-#if 0
- priv->watch_dog_timer.expires = jiffies + MSECS(IEEE80211_WATCH_DOG_TIME);
- add_timer(&priv->watch_dog_timer);
-#endif
}
int _rtl8192_up(struct net_device *dev)
{
bcheck = true;
}else
{
- #if 0
- // if previous packet is aggregated packet, and current packet
- // (1) is not AMPDU
- // (2) is the first packet of one AMPDU
- // that means the previous packet is the last one aggregated packet
- if( !pcurrent_stats->bIsAMPDU || pcurrent_stats->bFirstMPDU)
- bcheck = true;
- #endif
}
//evm = rtl819x_evm_dbtopercentage(rx_evmX);
evm = rtl819x_evm_dbtopercentage( (pdrvinfo->rxevm[i] /*/ 2*/)); //dbm
RT_TRACE(COMP_RF, "RXRATE=%x RXEVM=%x EVM=%s%d\n", pDesc->RxMCS, pdrvinfo->rxevm[i], "%", evm);
-#if 0
- EVM = SignalScaleMapping(EVM);//make it good looking, from 0~100//=====>from here
-#endif
//if(bpacket_match_bssid)
{
}
}
-#if 0
-/*-----------------------------------------------------------------------------
- * Function: UpdateRxAMPDUHistogramStatistics8192S
- *
- * Overview: Recored down the received A-MPDU aggregation size and pkt number
- *
- * Input: Adapter
- *
- * Output: Adapter
- * (Adapter->RxStats.RxAMPDUSizeHistogram[] is updated)
- * (Adapter->RxStats.RxAMPDUNumHistogram[] is updated)
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 09/18/2008 MHC Create Version 0.
- *
- *---------------------------------------------------------------------------*/
-static void
-UpdateRxAMPDUHistogramStatistics8192S(
- struct net_device *dev,
- struct ieee80211_rx_stats *stats
- )
-{
- //HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
- u8 size_index;
- u8 num_index;
- u16 update_size = 0;
- u8 update_num = 0;
-
- if(stats->bIsAMPDU)
- {
- if(stats->bFirstMPDU)
- {
- if(stats->nRxAMPDU_Size!=0 && stats->nRxAMPDU_AggrNum!=0)
- {
- update_size = stats->nRxAMPDU_Size;
- update_num = stats->nRxAMPDU_AggrNum;
- }
- stats->nRxAMPDU_Size = stats->Length;
- stats->nRxAMPDU_AggrNum = 1;
- }
- else
- {
- stats->nRxAMPDU_Size += stats->Length;
- stats->nRxAMPDU_AggrNum++;
- }
- }
- else
- {
- if(stats->nRxAMPDU_Size!=0 && stats->nRxAMPDU_AggrNum!=0)
- {
- update_size = stats->nRxAMPDU_Size;
- update_num = stats->nRxAMPDU_AggrNum;
- }
- stats->nRxAMPDU_Size = 0;
- stats->nRxAMPDU_AggrNum = 0;
- }
-
- if(update_size!=0 && update_num!= 0)
- {
- if(update_size < 4096)
- size_index = 0;
- else if(update_size < 8192)
- size_index = 1;
- else if(update_size < 16384)
- size_index = 2;
- else if(update_size < 32768)
- size_index = 3;
- else if(update_size < 65536)
- size_index = 4;
- else
- {
- RT_TRACE(COMP_RXDESC,
- ("UpdateRxAMPDUHistogramStatistics8192S(): A-MPDU too large\n");
- }
-
- Adapter->RxStats.RxAMPDUSizeHistogram[size_index]++;
-
- if(update_num < 5)
- num_index = 0;
- else if(update_num < 10)
- num_index = 1;
- else if(update_num < 20)
- num_index = 2;
- else if(update_num < 40)
- num_index = 3;
- else
- num_index = 4;
-
- Adapter->RxStats.RxAMPDUNumHistogram[num_index]++;
- }
-} // UpdateRxAMPDUHistogramStatistics8192S
-#endif
-
-
-
//
// Description:
// The strarting address of wireless lan header will shift 1 or 2 or 3 or "more" bytes for the following reason :
//
// Collection information in Rx descriptor.
//
-#if 0
- pRxDesc = pContext->Buffer;
-
- pRfd->Buffer.VirtualAddress = pContext->Buffer; // 061109, rcnjko, for multi-platform consideration..
-
- pRtRfdStatus->Length = (u2Byte)GET_RX_DESC_PKT_LEN(pRxDesc);
- pRtRfdStatus->RxDrvInfoSize = 0;
- pRtRfdStatus->RxBufShift = 0;
-
- pRfd->PacketLength = pRfd->Status.Length - sCrcLng;
- pRfd->FragLength = pRfd->PacketLength;
- pRfd->FragOffset = 0;
- pRfd->nTotalFrag = 1;
- pRfd->queue_id = PipeIndex;
-#endif
query_rx_cmdpkt_desc_status(skb,&stats);
// this is to be done by amy 080508 prfd->queue_id = 1;
ieee80211_wake_queue(priv->ieee80211);
}
-#if 0
-void DisableHWSecurityConfig8192SUsb(struct net_device *dev)
-{
- u8 SECR_value = 0x0;
- write_nic_byte(dev, SECR, SECR_value);//SECR_value | SCR_UseDK );
-}
-#endif
-
void EnableHWSecurityConfig8192(struct net_device *dev)
{
u8 SECR_value = 0x0;
//
// Indicate different AP vendor for IOT issue.
//
-#if 0
-typedef enum _HT_IOT_PEER
-{
- HT_IOT_PEER_UNKNOWN = 0,
- HT_IOT_PEER_REALTEK = 1,
- HT_IOT_PEER_BROADCOM = 2,
- HT_IOT_PEER_RALINK = 3,
- HT_IOT_PEER_ATHEROS = 4,
- HT_IOT_PEER_CISCO = 5,
- HT_IOT_PEER_MAX = 6
-}HT_IOT_PEER_E, *PHTIOT_PEER_E;
-#endif
#if 1
static u32 edca_setting_DL[HT_IOT_PEER_MAX] =
// UNKNOWN REALTEK_90 /*REALTEK_92SE*/ BROADCOM RALINK ATHEROS CISCO MARVELL 92U_AP SELF_AP
extern void dm_rf_operation_test_callback(unsigned long data);
extern void dm_rf_pathcheck_workitemcallback(struct work_struct *work);
extern void dm_fsync_timer_callback(unsigned long data);
-#if 0
-extern bool dm_check_lbus_status(struct net_device *dev);
-#endif
extern void dm_check_fsync(struct net_device *dev);
extern void dm_shadow_init(struct net_device *dev);
return;
}
- //==========================
- // this is only for test, should be masked
-#if 0
-{
- //UINT32 eRFPath;
- //UINT32 start_rf, end_rf;
- UINT32 curr_addr;
- //UINT32 reg_addr;
- //UINT32 reg_addr_end;
- UINT32 reg_value;
- //start_rf = RF90_PATH_A;
- //end_rf = RF90_PATH_B;//RF90_PATH_MAX;
- //reg_addr = 0x0;
- //reg_addr_end = 0x2F;
-
- for (curr_addr = 0; curr_addr < 0x2d; curr_addr++)
- {
- reg_value = PHY_QueryRFReg( Adapter, (RF90_RADIO_PATH_E)RF90_PATH_A,
- curr_addr, bMaskDWord);
- }
-
- pHalData->TXPowercount = 0;
- return;
-}
-#endif
- //==========================
-
// read and filter out unreasonable value
tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7]
RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA);
{
struct r8192_priv *priv = ieee80211_priv(dev);
static u8 TM_Trigger=0;
-#if 0
- u1Byte i;
- u4Byte tmpRegA;
- for(i=0; i<50; i++)
- {
- tmpRegA = PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7]
- PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
- //delay_us(100);
- PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
- //delay_us(100);
- }
- DbgPrint("Trigger and readback ThermalMeter, write RF reg0x2 = 0x4d to 0x4f for 50 times\n");
-#else
+
//DbgPrint("dm_CheckTXPowerTracking() \n");
if(!priv->btxpower_tracking)
return;
queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0);
TM_Trigger = 0;
}
-#endif
}
//cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]);
write_nic_dword(dev, RATR0, ratr_value);
write_nic_byte(dev, UFWP, 1);
-#if 0 // Disable old code.
- u1Byte index;
- u4Byte input_value;
- index = (u1Byte)((((pu4Byte)(val))[0]) >> 28);
- input_value = (((pu4Byte)(val))[0]) & 0x0fffffff;
- // TODO: Correct it. Emily 2007.01.11
- PlatformEFIOWrite4Byte(Adapter, RATR0+index*4, input_value);
-#endif
}
//Resore TX Power Tracking Index
if(priv->btxpower_trackingInit && priv->btxpower_tracking){
}
}
-#if 0
-extern void dm_force_tx_fw_info(struct net_device *dev,
- u32 force_type,
- u32 force_value)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
-
- if (force_type == 0) // don't force TxSC
- {
- //DbgPrint("Set Force SubCarrier Off\n");
- priv->tx_fwinfo_force_subcarriermode = 0;
- }
- else if(force_type == 1) //force
- {
- //DbgPrint("Set Force SubCarrier On\n");
- priv->tx_fwinfo_force_subcarriermode = 1;
- if(force_value > 3)
- force_value = 3;
- priv->tx_fwinfo_force_subcarrierval = (u8)force_value;
- }
-}
-#endif
-
/*-----------------------------------------------------------------------------
* Function: dm_dig_init()
*
}
}
-
-#if 0
-/*-----------------------------------------------------------------------------
- * Function: dm_rf_operation_test_callback()
- *
- * Overview: Only for RF operation test now.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 05/29/2008 amy Create Version 0 porting from windows code.
- *
- *---------------------------------------------------------------------------*/
-extern void dm_rf_operation_test_callback(unsigned long dev)
-{
-// struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
- u8 erfpath;
-
-
- for(erfpath=0; erfpath<4; erfpath++)
- {
- //DbgPrint("Set RF-%d\n\r", eRFPath);
- //PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3d7);
- udelay(100);
- }
-
- {
- //PlatformSetPeriodicTimer(Adapter, &pHalData->RfTest1Timer, 500);
- }
-
- // For test
- {
- //u8 i;
- //PlatformSetPeriodicTimer(Adapter, &pHalData->RfTest1Timer, 500);
-#if 0
- for(i=0; i<50; i++)
- {
- // Write Test
- PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4d);
- //delay_us(100);
- PHY_SetRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits, 0x4f);
- //delay_us(100);
- PHY_SetRFReg(Adapter, RF90_PATH_C, 0x02, bMask12Bits, 0x4d);
- //delay_us(100);
- PHY_SetRFReg(Adapter, RF90_PATH_C, 0x02, bMask12Bits, 0x4f);
- //delay_us(100);
-
-#if 0
- // Read test
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x02, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x12, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x21, bMask12Bits);
- //delay_us(100);
- PHY_QueryRFReg(Adapter, RF90_PATH_A, 0x21, bMask12Bits);
- //delay_us(100);
-#endif
- }
-#endif
- }
-
-} /* DM_RfOperationTestCallBack */
-#endif
-
/*-----------------------------------------------------------------------------
* Function: dm_check_rfctrl_gpio()
*
#endif
reg_c38_State = RegC38_NonFsync_Other_AP;
- #if 0//cosa
- if (Adapter->HardwareType == HARDWARE_TYPE_RTL8190P)
- DbgPrint("Fsync is idle, rssi<=35, write 0xc38 = 0x%x \n", 0x10);
- else
- DbgPrint("Fsync is idle, rssi<=35, write 0xc38 = 0x%x \n", 0x90);
- #endif
}
}
else if(priv->undecorated_smoothed_pwdb >= (RegC38_TH+5))
}
}
-#if 0
-/*-----------------------------------------------------------------------------
- * Function: DM_CheckLBusStatus()
- *
- * Overview: For 9x series, we must make sure LBUS is active for IO.
- *
- * Input: NONE
- *
- * Output: NONE
- *
- * Return: NONE
- *
- * Revised History:
- * When Who Remark
- * 02/22/2008 MHC Create Version 0.
- *
- *---------------------------------------------------------------------------*/
-extern s1Byte DM_CheckLBusStatus(IN PADAPTER Adapter)
-{
- PMGNT_INFO pMgntInfo=&Adapter->MgntInfo;
-
-#if (HAL_CODE_BASE & RTL819X)
-
-#if (HAL_CODE_BASE == RTL8192)
-
-#if( DEV_BUS_TYPE==PCI_INTERFACE)
- //return (pMgntInfo->bLbusEnable); // For debug only
- return TRUE;
-#endif
-
-#if( DEV_BUS_TYPE==USB_INTERFACE)
- return TRUE;
-#endif
-
-#endif // #if (HAL_CODE_BASE == RTL8192)
-
-#if (HAL_CODE_BASE == RTL8190)
- return TRUE;
-#endif // #if (HAL_CODE_BASE == RTL8190)
-
-#endif // #if (HAL_CODE_BASE & RTL819X)
-} /* DM_CheckLBusStatus */
-
-#endif
-
/*-----------------------------------------------------------------------------
* Function: dm_shadow_init()
*
#define Initial_Tx_Rate_Reg 0x1b9
#define Tx_Retry_Count_Reg 0x1ac
#define RegC38_TH 20
-#if 0
-//----------------------------------------------------------------------------
-// 8190 Rate Adaptive Table Register (offset 0x320, 4 byte)
-//----------------------------------------------------------------------------
-
-//CCK
-#define RATR_1M 0x00000001
-#define RATR_2M 0x00000002
-#define RATR_55M 0x00000004
-#define RATR_11M 0x00000008
-//OFDM
-#define RATR_6M 0x00000010
-#define RATR_9M 0x00000020
-#define RATR_12M 0x00000040
-#define RATR_18M 0x00000080
-#define RATR_24M 0x00000100
-#define RATR_36M 0x00000200
-#define RATR_48M 0x00000400
-#define RATR_54M 0x00000800
-//MCS 1 Spatial Stream
-#define RATR_MCS0 0x00001000
-#define RATR_MCS1 0x00002000
-#define RATR_MCS2 0x00004000
-#define RATR_MCS3 0x00008000
-#define RATR_MCS4 0x00010000
-#define RATR_MCS5 0x00020000
-#define RATR_MCS6 0x00040000
-#define RATR_MCS7 0x00080000
-//MCS 2 Spatial Stream
-#define RATR_MCS8 0x00100000
-#define RATR_MCS9 0x00200000
-#define RATR_MCS10 0x00400000
-#define RATR_MCS11 0x00800000
-#define RATR_MCS12 0x01000000
-#define RATR_MCS13 0x02000000
-#define RATR_MCS14 0x04000000
-#define RATR_MCS15 0x08000000
-// ALL CCK Rate
-#define RATE_ALL_CCK RATR_1M|RATR_2M|RATR_55M|RATR_11M
-#define RATE_ALL_OFDM_AG RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\
- |RATR_36M|RATR_48M|RATR_54M
-#define RATE_ALL_OFDM_2SS RATR_MCS8|RATR_MCS9 |RATR_MCS10|RATR_MCS11| \
- RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
-#endif
/*--------------------------Define Parameters-------------------------------*/
extern void dm_rf_pathcheck_workitemcallback(struct work_struct *work);
extern void dm_fsync_timer_callback(unsigned long data);
extern void dm_cck_txpower_adjust(struct net_device *dev,bool binch14);
-#if 0
-extern char dm_check_lbus_status(IN PADAPTER Adapter);
-#endif
extern void dm_shadow_init(struct net_device *dev);
extern void dm_initialize_txpower_tracking(struct net_device *dev);
/*--------------------------Exported Function prototype---------------------*/
return ieee80211_wx_get_freq(priv->ieee80211,a,wrqu,b);
}
-
-#if 0
-
-static int r8192_wx_set_beaconinterval(struct net_device *dev, struct iw_request_info *aa,
- union iwreq_data *wrqu, char *b)
-{
- int *parms = (int *)b;
- int bi = parms[0];
-
- struct r8192_priv *priv = ieee80211_priv(dev);
-
- down(&priv->wx_sem);
- DMESG("setting beacon interval to %x",bi);
-
- priv->ieee80211->beacon_interval=bi;
- rtl8180_commit(dev);
- up(&priv->wx_sem);
-
- return 0;
-}
-
-
-static int r8192_wx_set_forceassociate(struct net_device *dev, struct iw_request_info *aa,
- union iwreq_data *wrqu, char *extra)
-{
- struct r8192_priv *priv=ieee80211_priv(dev);
- int *parms = (int *)extra;
-
- priv->ieee80211->force_associate = (parms[0] > 0);
-
-
- return 0;
-}
-
-#endif
static int r8192_wx_get_mode(struct net_device *dev, struct iw_request_info *a,
union iwreq_data *wrqu, char *b)
{
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 databb;
-#if 0
- int i;
- for(i=0;i<12;i++) printk("%8x\n", read_cam(dev, i) );
-#endif
down(&priv->wx_sem);
-#endif
-#if 0
-static int r8192_wx_null(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- return 0;
-}
#endif
static int r8192_wx_force_reset(struct net_device *dev,
struct iw_request_info *info,
return err;
}
-#if 0
-static int r8192_wx_get_enc_ext(struct net_device *dev,
- struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct r8192_priv *priv = ieee80211_priv(dev);
- int ret = 0;
- ret = ieee80211_wx_get_encode_ext(priv->ieee80211, info, wrqu, extra);
- return ret;
-}
-#endif
//hw security need to reorganized.
static int r8192_wx_set_enc_ext(struct net_device *dev,
struct iw_request_info *info,
u32 key[4] = {0};
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
struct iw_point *encoding = &wrqu->encoding;
-#if 0
- static u8 CAM_CONST_ADDR[4][6] = {
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x03}};
-#endif
u8 idx = 0, alg = 0, group = 0;
if ((encoding->flags & IW_ENCODE_DISABLED) ||
ext->alg == IW_ENCODE_ALG_NONE) //none is not allowed to use hwsec WB 2008.07.01
//cmpk_Display_Message(CMPK_RX_TX_FB_SIZE, pMsg);
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
- /* It seems that FW use big endian(MIPS) and DRV use little endian in
- windows OS. So we have to read the content byte by byte or transfer
- endian type before copy the message copy. */
-#if 0 // The TX FEEDBACK packet element address
- //rx_tx_fb.Element_ID = pMsg[0];
- //rx_tx_fb.Length = pMsg[1];
- rx_tx_fb.TOK = pMsg[2]>>7;
- rx_tx_fb.Fail_Reason = (pMsg[2] & 0x70) >> 4;
- rx_tx_fb.TID = (pMsg[2] & 0x0F);
- rx_tx_fb.Qos_Pkt = pMsg[3] >> 7;
- rx_tx_fb.Bandwidth = (pMsg[3] & 0x40) >> 6;
- rx_tx_fb.Retry_Cnt = pMsg[5];
- rx_tx_fb.Pkt_ID = (pMsg[6] << 8) | pMsg[7];
- rx_tx_fb.Seq_Num = (pMsg[8] << 8) | pMsg[9];
- rx_tx_fb.S_Rate = pMsg[10];
- rx_tx_fb.F_Rate = pMsg[11];
- rx_tx_fb.S_RTS_Rate = pMsg[12];
- rx_tx_fb.F_RTS_Rate = pMsg[13];
- rx_tx_fb.pkt_length = (pMsg[14] << 8) | pMsg[15];
-#endif
+
/* 2007/07/05 MH Use pointer to transfer structure memory. */
//memcpy((UINT8 *)&rx_tx_fb, pMsg, sizeof(CMPK_TXFB_T));
memcpy((u8*)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t));
/* 2. Use tx feedback info to count TX statistics. */
cmpk_count_txstatistic(dev, &rx_tx_fb);
-#if 0
- /* 2007/07/11 MH Assign current operate rate. */
- if (pAdapter->RegWirelessMode == WIRELESS_MODE_A ||
- pAdapter->RegWirelessMode == WIRELESS_MODE_B ||
- pAdapter->RegWirelessMode == WIRELESS_MODE_G)
- {
- pMgntInfo->CurrentOperaRate = (rx_tx_fb.F_Rate & 0x7F);
- }
- else if (pAdapter->RegWirelessMode == WIRELESS_MODE_N_24G ||
- pAdapter->RegWirelessMode == WIRELESS_MODE_N_5G)
- {
- pMgntInfo->HTCurrentOperaRate = (rx_tx_fb.F_Rate & 0x8F);
- }
-#endif
+
/* 2007/01/17 MH Comment previous method for TX statistic function. */
/* Collect info TX feedback packet to fill TCB. */
/* We can not know the packet length and transmit type: broadcast or uni
#define ISR_TxBcnErr BIT26 // Transmit Beacon Error
#define ISR_BcnTimerIntr BIT13 // Beacon Timer Interrupt
-#if 0
-/* Define packet type. */
-typedef enum tag_packet_type
-{
- PACKET_BROADCAST,
- PACKET_MULTICAST,
- PACKET_UNICAST,
- PACKET_TYPE_MAX
-}cmpk_pkt_type_e;
-#endif
-
/* Define element ID of command packet. */
/*------------------------------Define structure----------------------------*/
RX_CMD_ELE_MAX
}cmpk_element_e;
-#if 0
-typedef enum _rt_status{
- RT_STATUS_SUCCESS,
- RT_STATUS_FAILURE,
- RT_STATUS_PENDING,
- RT_STATUS_RESOURCE
-}rt_status,*prt_status;
-#endif
-
extern bool cmpk_message_handle_tx(struct net_device *dev, u8* codevirtualaddress, u32 packettype, u32 buffer_len);
extern u32 cmpk_message_handle_rx(struct net_device *dev, struct ieee80211_rx_stats * pstats);
projects / mirror_ubuntu-focal-kernel.git / commitdiff