ARM: dts: imx6dl-sabreauto: update opp table for auto part

Update i.MX6DL automotive part's opp table according to i.MX6DL
automotive datasheet Rev.9, 11/2018, it adds 996MHz set-point
support as below:

LDO enabled(min value):
996MHz: VDDARM: 1.275V, VDDSOC: 1.175V;
792MHz: VDDARM: 1.150V, VDDSOC: 1.150V;
396MHz: VDDARM: 1.125V, VDDSOC: 1.150V;

Adding 25mV to cover board IR drop, for LDO enabled mode of 996MHz,
as the max value of LDO output can NOT exceed 1.3V, so 25mV is NOT
added for VDDARM.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
index 660d52a245babe5a3fd0f0aafe693a77e2339db5..ff3283c83a39443864baa99b932c7bbae44fe984 100644 (file)
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
@@ -11,3 +11,18 @@
        model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
        compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
 };
+
+&cpu0 {
+       operating-points = <
+               /* kHz    uV */
+               996000  1275000
+               792000  1175000
+               396000  1150000
+       >;
+       fsl,soc-operating-points = <
+               /* ARM kHz  SOC-PU uV */
+               996000  1200000
+               792000  1175000
+               396000  1175000
+       >;
+};