]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/commitdiff
staging: comedi: addi_apci_16xx: separate from addi_common.c
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Fri, 18 Jan 2013 17:40:31 +0000 (10:40 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 18 Jan 2013 20:57:21 +0000 (12:57 -0800)
This driver is for two simple ttl digital output boards. One with
48 channels the other with 96. Using the addi-data "common" code
introduces a lot of bloat.

Copy the code in addi_common.c to this driver and remove the #include
that caused addi_common.c to be compiled with this driver. This will
allow removing the bloat.

Rename the auto_attach and detach functions so they have namespace
associated with this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/addi_apci_16xx.c

index ab9a96ac8180f4207394e344f0890da0c597f673..658943bc85f7376ebf6f5dd8ca5e2b97214ef609 100644 (file)
@@ -4,9 +4,12 @@
 
 #include "addi-data/addi_common.h"
 
+#ifndef COMEDI_SUBD_TTLIO
+#define COMEDI_SUBD_TTLIO   11 /* Digital Input Output But TTL */
+#endif
+
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci16xx.c"
-#include "addi-data/addi_common.c"
 
 static const struct addi_board apci16xx_boardtypes[] = {
        {
@@ -36,11 +39,316 @@ static const struct addi_board apci16xx_boardtypes[] = {
        },
 };
 
+static int i_ADDIDATA_InsnReadEeprom(struct comedi_device *dev,
+                                    struct comedi_subdevice *s,
+                                    struct comedi_insn *insn,
+                                    unsigned int *data)
+{
+       const struct addi_board *this_board = comedi_board(dev);
+       struct addi_private *devpriv = dev->private;
+       unsigned short w_Address = CR_CHAN(insn->chanspec);
+       unsigned short w_Data;
+
+       w_Data = addi_eeprom_readw(devpriv->i_IobaseAmcc,
+               this_board->pc_EepromChip, 2 * w_Address);
+       data[0] = w_Data;
+
+       return insn->n;
+}
+
+static irqreturn_t v_ADDI_Interrupt(int irq, void *d)
+{
+       struct comedi_device *dev = d;
+       const struct addi_board *this_board = comedi_board(dev);
+
+       this_board->interrupt(irq, d);
+       return IRQ_RETVAL(1);
+}
+
+static int i_ADDI_Reset(struct comedi_device *dev)
+{
+       const struct addi_board *this_board = comedi_board(dev);
+
+       this_board->reset(dev);
+       return 0;
+}
+
+static const void *addi_find_boardinfo(struct comedi_device *dev,
+                                      struct pci_dev *pcidev)
+{
+       const void *p = dev->driver->board_name;
+       const struct addi_board *this_board;
+       int i;
+
+       for (i = 0; i < dev->driver->num_names; i++) {
+               this_board = p;
+               if (this_board->i_VendorId == pcidev->vendor &&
+                   this_board->i_DeviceId == pcidev->device)
+                       return this_board;
+               p += dev->driver->offset;
+       }
+       return NULL;
+}
+
+static int apci16xx_auto_attach(struct comedi_device *dev,
+                               unsigned long context_unused)
+{
+       struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+       const struct addi_board *this_board;
+       struct addi_private *devpriv;
+       struct comedi_subdevice *s;
+       int ret, n_subdevices;
+       unsigned int dw_Dummy;
+
+       this_board = addi_find_boardinfo(dev, pcidev);
+       if (!this_board)
+               return -ENODEV;
+       dev->board_ptr = this_board;
+       dev->board_name = this_board->pc_DriverName;
+
+       devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
+       if (!devpriv)
+               return -ENOMEM;
+       dev->private = devpriv;
+
+       ret = comedi_pci_enable(pcidev, dev->board_name);
+       if (ret)
+               return ret;
+
+       if (!this_board->pc_EepromChip ||
+           strcmp(this_board->pc_EepromChip, ADDIDATA_9054)) {
+               /* board does not have an eeprom or is not ADDIDATA_9054 */
+               if (this_board->i_IorangeBase1)
+                       dev->iobase = pci_resource_start(pcidev, 1);
+               else
+                       dev->iobase = pci_resource_start(pcidev, 0);
+
+               devpriv->iobase = dev->iobase;
+               devpriv->i_IobaseAmcc = pci_resource_start(pcidev, 0);
+               devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
+       } else {
+               /* board has an ADDIDATA_9054 eeprom */
+               dev->iobase = pci_resource_start(pcidev, 2);
+               devpriv->iobase = pci_resource_start(pcidev, 2);
+               devpriv->dw_AiBase = ioremap(pci_resource_start(pcidev, 3),
+                                            this_board->i_IorangeBase3);
+       }
+       devpriv->i_IobaseReserved = pci_resource_start(pcidev, 3);
+
+       /* Initialize parameters that can be overridden in EEPROM */
+       devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
+       devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
+       devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
+       devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
+       devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
+       devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
+       devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
+       devpriv->s_EeParameters.i_Dma = this_board->i_Dma;
+       devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
+       devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
+               this_board->ui_MinAcquisitiontimeNs;
+       devpriv->s_EeParameters.ui_MinDelaytimeNs =
+               this_board->ui_MinDelaytimeNs;
+
+       /* ## */
+
+       if (pcidev->irq > 0) {
+               ret = request_irq(pcidev->irq, v_ADDI_Interrupt, IRQF_SHARED,
+                                 dev->board_name, dev);
+               if (ret == 0)
+                       dev->irq = pcidev->irq;
+       }
+
+       /*  Read eepeom and fill addi_board Structure */
+
+       if (this_board->i_PCIEeprom) {
+               if (!(strcmp(this_board->pc_EepromChip, "S5920"))) {
+                       /*  Set 3 wait stait */
+                       if (!(strcmp(dev->board_name, "apci035")))
+                               outl(0x80808082, devpriv->i_IobaseAmcc + 0x60);
+                       else
+                               outl(0x83838383, devpriv->i_IobaseAmcc + 0x60);
+
+                       /*  Enable the interrupt for the controller */
+                       dw_Dummy = inl(devpriv->i_IobaseAmcc + 0x38);
+                       outl(dw_Dummy | 0x2000, devpriv->i_IobaseAmcc + 0x38);
+               }
+               addi_eeprom_read_info(dev, pci_resource_start(pcidev, 0));
+       }
+
+       n_subdevices = 7;
+       ret = comedi_alloc_subdevices(dev, n_subdevices);
+       if (ret)
+               return ret;
+
+       /*  Allocate and Initialise AI Subdevice Structures */
+       s = &dev->subdevices[0];
+       if ((devpriv->s_EeParameters.i_NbrAiChannel)
+               || (this_board->i_NbrAiChannelDiff)) {
+               dev->read_subdev = s;
+               s->type = COMEDI_SUBD_AI;
+               s->subdev_flags =
+                       SDF_READABLE | SDF_COMMON | SDF_GROUND
+                       | SDF_DIFF;
+               if (devpriv->s_EeParameters.i_NbrAiChannel) {
+                       s->n_chan =
+                               devpriv->s_EeParameters.i_NbrAiChannel;
+                       devpriv->b_SingelDiff = 0;
+               } else {
+                       s->n_chan = this_board->i_NbrAiChannelDiff;
+                       devpriv->b_SingelDiff = 1;
+               }
+               s->maxdata = devpriv->s_EeParameters.i_AiMaxdata;
+               s->len_chanlist = this_board->i_AiChannelList;
+               s->range_table = this_board->pr_AiRangelist;
+
+               /* Set the initialisation flag */
+               devpriv->b_AiInitialisation = 1;
+
+               s->insn_config = this_board->ai_config;
+               s->insn_read = this_board->ai_read;
+               s->insn_write = this_board->ai_write;
+               s->insn_bits = this_board->ai_bits;
+               s->do_cmdtest = this_board->ai_cmdtest;
+               s->do_cmd = this_board->ai_cmd;
+               s->cancel = this_board->ai_cancel;
+
+       } else {
+               s->type = COMEDI_SUBD_UNUSED;
+       }
+
+       /*  Allocate and Initialise AO Subdevice Structures */
+       s = &dev->subdevices[1];
+       if (devpriv->s_EeParameters.i_NbrAoChannel) {
+               s->type = COMEDI_SUBD_AO;
+               s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+               s->n_chan = devpriv->s_EeParameters.i_NbrAoChannel;
+               s->maxdata = devpriv->s_EeParameters.i_AoMaxdata;
+               s->len_chanlist =
+                       devpriv->s_EeParameters.i_NbrAoChannel;
+               s->range_table = this_board->pr_AoRangelist;
+               s->insn_config = this_board->ao_config;
+               s->insn_write = this_board->ao_write;
+       } else {
+               s->type = COMEDI_SUBD_UNUSED;
+       }
+       /*  Allocate and Initialise DI Subdevice Structures */
+       s = &dev->subdevices[2];
+       if (devpriv->s_EeParameters.i_NbrDiChannel) {
+               s->type = COMEDI_SUBD_DI;
+               s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
+               s->n_chan = devpriv->s_EeParameters.i_NbrDiChannel;
+               s->maxdata = 1;
+               s->len_chanlist =
+                       devpriv->s_EeParameters.i_NbrDiChannel;
+               s->range_table = &range_digital;
+               s->io_bits = 0; /* all bits input */
+               s->insn_config = this_board->di_config;
+               s->insn_read = this_board->di_read;
+               s->insn_write = this_board->di_write;
+               s->insn_bits = this_board->di_bits;
+       } else {
+               s->type = COMEDI_SUBD_UNUSED;
+       }
+       /*  Allocate and Initialise DO Subdevice Structures */
+       s = &dev->subdevices[3];
+       if (devpriv->s_EeParameters.i_NbrDoChannel) {
+               s->type = COMEDI_SUBD_DO;
+               s->subdev_flags =
+                       SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+               s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
+               s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
+               s->len_chanlist =
+                       devpriv->s_EeParameters.i_NbrDoChannel;
+               s->range_table = &range_digital;
+               s->io_bits = 0xf;       /* all bits output */
+
+               /* insn_config - for digital output memory */
+               s->insn_config = this_board->do_config;
+               s->insn_write = this_board->do_write;
+               s->insn_bits = this_board->do_bits;
+               s->insn_read = this_board->do_read;
+       } else {
+               s->type = COMEDI_SUBD_UNUSED;
+       }
+
+       /*  Allocate and Initialise Timer Subdevice Structures */
+       s = &dev->subdevices[4];
+       if (devpriv->s_EeParameters.i_Timer) {
+               s->type = COMEDI_SUBD_TIMER;
+               s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
+               s->n_chan = 1;
+               s->maxdata = 0;
+               s->len_chanlist = 1;
+               s->range_table = &range_digital;
+
+               s->insn_write = this_board->timer_write;
+               s->insn_read = this_board->timer_read;
+               s->insn_config = this_board->timer_config;
+               s->insn_bits = this_board->timer_bits;
+       } else {
+               s->type = COMEDI_SUBD_UNUSED;
+       }
+
+       /*  Allocate and Initialise TTL */
+       s = &dev->subdevices[5];
+       if (this_board->i_NbrTTLChannel) {
+               s->type = COMEDI_SUBD_TTLIO;
+               s->subdev_flags =
+                       SDF_WRITEABLE | SDF_READABLE | SDF_GROUND | SDF_COMMON;
+               s->n_chan = this_board->i_NbrTTLChannel;
+               s->maxdata = 1;
+               s->io_bits = 0; /* all bits input */
+               s->len_chanlist = this_board->i_NbrTTLChannel;
+               s->range_table = &range_digital;
+               s->insn_config = this_board->ttl_config;
+               s->insn_bits = this_board->ttl_bits;
+               s->insn_read = this_board->ttl_read;
+               s->insn_write = this_board->ttl_write;
+       } else {
+               s->type = COMEDI_SUBD_UNUSED;
+       }
+
+       /* EEPROM */
+       s = &dev->subdevices[6];
+       if (this_board->i_PCIEeprom) {
+               s->type = COMEDI_SUBD_MEMORY;
+               s->subdev_flags = SDF_READABLE | SDF_INTERNAL;
+               s->n_chan = 256;
+               s->maxdata = 0xffff;
+               s->insn_read = i_ADDIDATA_InsnReadEeprom;
+       } else {
+               s->type = COMEDI_SUBD_UNUSED;
+       }
+
+       i_ADDI_Reset(dev);
+       return 0;
+}
+
+static void apci16xx_detach(struct comedi_device *dev)
+{
+       struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+       struct addi_private *devpriv = dev->private;
+
+       if (devpriv) {
+               if (dev->iobase)
+                       i_ADDI_Reset(dev);
+               if (dev->irq)
+                       free_irq(dev->irq, dev);
+               if (devpriv->dw_AiBase)
+                       iounmap(devpriv->dw_AiBase);
+       }
+       if (pcidev) {
+               if (dev->iobase)
+                       comedi_pci_disable(pcidev);
+       }
+}
+
 static struct comedi_driver apci16xx_driver = {
        .driver_name    = "addi_apci_16xx",
        .module         = THIS_MODULE,
-       .auto_attach    = addi_auto_attach,
-       .detach         = i_ADDI_Detach,
+       .auto_attach    = apci16xx_auto_attach,
+       .detach         = apci16xx_detach,
        .num_names      = ARRAY_SIZE(apci16xx_boardtypes),
        .board_name     = &apci16xx_boardtypes[0].pc_DriverName,
        .offset         = sizeof(struct addi_board),