]> git.proxmox.com Git - mirror_ubuntu-eoan-kernel.git/commitdiff
e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8
authorBruce Allan <bruce.w.allan@intel.com>
Thu, 19 Nov 2009 12:34:20 +0000 (12:34 +0000)
committerDavid S. Miller <davem@davemloft.net>
Fri, 20 Nov 2009 21:53:20 +0000 (13:53 -0800)
Commit 3ec2a2b80f3eb53851fe4cef9e65b5d33376ef89 broke Tx/Rx when using
jumbo frames on certain parts (i.e. only PAUSE frames could be exchanged
once the high water mark was reached preventing normal packet traffic).
This patch reverts the breakage and sets appropriate high and low water
marks of the Rx FIFO for 82577/82578 which require a workaround due to a
flow control issue in hardware.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/e1000e/e1000.h
drivers/net/e1000e/ich8lan.c
drivers/net/e1000e/netdev.c

index 189dfa2d6c76b80ad4702bfb281a541ed500b783..3e187b0e4203e5aa574435a200c57d30468ab397 100644 (file)
@@ -141,6 +141,8 @@ struct e1000_info;
 #define HV_TNCRS_UPPER         PHY_REG(778, 29) /* Transmit with no CRS */
 #define HV_TNCRS_LOWER         PHY_REG(778, 30)
 
+#define E1000_FCRTV_PCH     0x05F40 /* PCH Flow Control Refresh Timer Value */
+
 /* BM PHY Copper Specific Status */
 #define BM_CS_STATUS                      17
 #define BM_CS_STATUS_LINK_UP              0x0400
index 51ddb04ab19588adcb16e460f7beecd1261b8e69..92cf1033365449c8d66a1969f041804e71d153e0 100644 (file)
@@ -3558,6 +3558,7 @@ struct e1000_info e1000_pch_info = {
                                  | FLAG_HAS_AMT
                                  | FLAG_HAS_FLASH
                                  | FLAG_HAS_JUMBO_FRAMES
+                                 | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
                                  | FLAG_APME_IN_WUC,
        .pba                    = 26,
        .max_hw_frame_size      = 4096,
index 0687c6aa4e46e406c0dd67d33169b6574be75f7f..a1a5a6f15a65b8de274bc31ebb04a2de4b7e1a6d 100644 (file)
@@ -2769,25 +2769,38 @@ void e1000e_reset(struct e1000_adapter *adapter)
        /*
         * flow control settings
         *
-        * The high water mark must be low enough to fit two full frame
+        * The high water mark must be low enough to fit one full frame
         * (or the size used for early receive) above it in the Rx FIFO.
         * Set it to the lower of:
         * - 90% of the Rx FIFO size, and
         * - the full Rx FIFO size minus the early receive size (for parts
         *   with ERT support assuming ERT set to E1000_ERT_2048), or
-        * - the full Rx FIFO size minus two full frames
+        * - the full Rx FIFO size minus one full frame
         */
-       if ((adapter->flags & FLAG_HAS_ERT) &&
-           (adapter->netdev->mtu > ETH_DATA_LEN))
-               hwm = min(((pba << 10) * 9 / 10),
-                         ((pba << 10) - (E1000_ERT_2048 << 3)));
-       else
-               hwm = min(((pba << 10) * 9 / 10),
-                         ((pba << 10) - (2 * adapter->max_frame_size)));
+       if (hw->mac.type == e1000_pchlan) {
+               /*
+                * Workaround PCH LOM adapter hangs with certain network
+                * loads.  If hangs persist, try disabling Tx flow control.
+                */
+               if (adapter->netdev->mtu > ETH_DATA_LEN) {
+                       fc->high_water = 0x3500;
+                       fc->low_water  = 0x1500;
+               } else {
+                       fc->high_water = 0x5000;
+                       fc->low_water  = 0x3000;
+               }
+       } else {
+               if ((adapter->flags & FLAG_HAS_ERT) &&
+                   (adapter->netdev->mtu > ETH_DATA_LEN))
+                       hwm = min(((pba << 10) * 9 / 10),
+                                 ((pba << 10) - (E1000_ERT_2048 << 3)));
+               else
+                       hwm = min(((pba << 10) * 9 / 10),
+                                 ((pba << 10) - adapter->max_frame_size));
 
-       fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
-       fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
-       fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
+               fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+               fc->low_water = fc->high_water - 8;
+       }
 
        if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
                fc->pause_time = 0xFFFF;
@@ -2813,6 +2826,10 @@ void e1000e_reset(struct e1000_adapter *adapter)
        if (mac->ops.init_hw(hw))
                e_err("Hardware Error\n");
 
+       /* additional part of the flow-control workaround above */
+       if (hw->mac.type == e1000_pchlan)
+               ew32(FCRTV_PCH, 0x1000);
+
        e1000_update_mng_vlan(adapter);
 
        /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */