.dcache_bsize = 32,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500",
- .oprofile_type = PPC_OPROFILE_BOOKE,
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
.machine_check = machine_check_e500,
.platform = "ppc8540",
},
.dcache_bsize = 32,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc/e500",
- .oprofile_type = PPC_OPROFILE_BOOKE,
+ .oprofile_type = PPC_OPROFILE_FSL_EMB,
.machine_check = machine_check_e500,
.platform = "ppc8548",
},
static void dummy_perf(struct pt_regs *regs)
{
-#if defined(CONFIG_FSL_BOOKE) && !defined(CONFIG_E200)
+#if defined(CONFIG_FSL_EMB_PERFMON)
mtpmr(PMRN_PMGC0, mfpmr(PMRN_PMGC0) & ~PMGC0_PMIE);
#elif defined(CONFIG_PPC64) || defined(CONFIG_6xx)
if (cur_cpu_spec->pmc_type == PPC_PMC_IBM)
cell/spu_profiler.o cell/vma_map.o \
cell/spu_task_sync.o
oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o
-oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o
+oprofile-$(CONFIG_FSL_EMB_PERFMON) += op_model_fsl_emb.o
oprofile-$(CONFIG_6xx) += op_model_7450.o
model = &op_model_7450;
break;
#endif
-#ifdef CONFIG_FSL_BOOKE
- case PPC_OPROFILE_BOOKE:
- model = &op_model_fsl_booke;
+#if defined(CONFIG_FSL_EMB_PERFMON)
+ case PPC_OPROFILE_FSL_EMB:
+ model = &op_model_fsl_emb;
break;
#endif
default:
+++ /dev/null
-/*
- * arch/powerpc/oprofile/op_model_fsl_booke.c
- *
- * Freescale Book-E oprofile support, based on ppc64 oprofile support
- * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * Copyright (c) 2004 Freescale Semiconductor, Inc
- *
- * Author: Andy Fleming
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/reg_booke.h>
-#include <asm/page.h>
-#include <asm/pmc.h>
-#include <asm/oprofile_impl.h>
-
-static unsigned long reset_value[OP_MAX_COUNTER];
-
-static int num_counters;
-static int oprofile_running;
-
-static inline u32 get_pmlca(int ctr)
-{
- u32 pmlca;
-
- switch (ctr) {
- case 0:
- pmlca = mfpmr(PMRN_PMLCA0);
- break;
- case 1:
- pmlca = mfpmr(PMRN_PMLCA1);
- break;
- case 2:
- pmlca = mfpmr(PMRN_PMLCA2);
- break;
- case 3:
- pmlca = mfpmr(PMRN_PMLCA3);
- break;
- default:
- panic("Bad ctr number\n");
- }
-
- return pmlca;
-}
-
-static inline void set_pmlca(int ctr, u32 pmlca)
-{
- switch (ctr) {
- case 0:
- mtpmr(PMRN_PMLCA0, pmlca);
- break;
- case 1:
- mtpmr(PMRN_PMLCA1, pmlca);
- break;
- case 2:
- mtpmr(PMRN_PMLCA2, pmlca);
- break;
- case 3:
- mtpmr(PMRN_PMLCA3, pmlca);
- break;
- default:
- panic("Bad ctr number\n");
- }
-}
-
-static inline unsigned int ctr_read(unsigned int i)
-{
- switch(i) {
- case 0:
- return mfpmr(PMRN_PMC0);
- case 1:
- return mfpmr(PMRN_PMC1);
- case 2:
- return mfpmr(PMRN_PMC2);
- case 3:
- return mfpmr(PMRN_PMC3);
- default:
- return 0;
- }
-}
-
-static inline void ctr_write(unsigned int i, unsigned int val)
-{
- switch(i) {
- case 0:
- mtpmr(PMRN_PMC0, val);
- break;
- case 1:
- mtpmr(PMRN_PMC1, val);
- break;
- case 2:
- mtpmr(PMRN_PMC2, val);
- break;
- case 3:
- mtpmr(PMRN_PMC3, val);
- break;
- default:
- break;
- }
-}
-
-
-static void init_pmc_stop(int ctr)
-{
- u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU |
- PMLCA_FCM1 | PMLCA_FCM0);
- u32 pmlcb = 0;
-
- switch (ctr) {
- case 0:
- mtpmr(PMRN_PMLCA0, pmlca);
- mtpmr(PMRN_PMLCB0, pmlcb);
- break;
- case 1:
- mtpmr(PMRN_PMLCA1, pmlca);
- mtpmr(PMRN_PMLCB1, pmlcb);
- break;
- case 2:
- mtpmr(PMRN_PMLCA2, pmlca);
- mtpmr(PMRN_PMLCB2, pmlcb);
- break;
- case 3:
- mtpmr(PMRN_PMLCA3, pmlca);
- mtpmr(PMRN_PMLCB3, pmlcb);
- break;
- default:
- panic("Bad ctr number!\n");
- }
-}
-
-static void set_pmc_event(int ctr, int event)
-{
- u32 pmlca;
-
- pmlca = get_pmlca(ctr);
-
- pmlca = (pmlca & ~PMLCA_EVENT_MASK) |
- ((event << PMLCA_EVENT_SHIFT) &
- PMLCA_EVENT_MASK);
-
- set_pmlca(ctr, pmlca);
-}
-
-static void set_pmc_user_kernel(int ctr, int user, int kernel)
-{
- u32 pmlca;
-
- pmlca = get_pmlca(ctr);
-
- if(user)
- pmlca &= ~PMLCA_FCU;
- else
- pmlca |= PMLCA_FCU;
-
- if(kernel)
- pmlca &= ~PMLCA_FCS;
- else
- pmlca |= PMLCA_FCS;
-
- set_pmlca(ctr, pmlca);
-}
-
-static void set_pmc_marked(int ctr, int mark0, int mark1)
-{
- u32 pmlca = get_pmlca(ctr);
-
- if(mark0)
- pmlca &= ~PMLCA_FCM0;
- else
- pmlca |= PMLCA_FCM0;
-
- if(mark1)
- pmlca &= ~PMLCA_FCM1;
- else
- pmlca |= PMLCA_FCM1;
-
- set_pmlca(ctr, pmlca);
-}
-
-static void pmc_start_ctr(int ctr, int enable)
-{
- u32 pmlca = get_pmlca(ctr);
-
- pmlca &= ~PMLCA_FC;
-
- if (enable)
- pmlca |= PMLCA_CE;
- else
- pmlca &= ~PMLCA_CE;
-
- set_pmlca(ctr, pmlca);
-}
-
-static void pmc_start_ctrs(int enable)
-{
- u32 pmgc0 = mfpmr(PMRN_PMGC0);
-
- pmgc0 &= ~PMGC0_FAC;
- pmgc0 |= PMGC0_FCECE;
-
- if (enable)
- pmgc0 |= PMGC0_PMIE;
- else
- pmgc0 &= ~PMGC0_PMIE;
-
- mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-static void pmc_stop_ctrs(void)
-{
- u32 pmgc0 = mfpmr(PMRN_PMGC0);
-
- pmgc0 |= PMGC0_FAC;
-
- pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE);
-
- mtpmr(PMRN_PMGC0, pmgc0);
-}
-
-static void dump_pmcs(void)
-{
- printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0));
- printk("pmc\t\tpmlca\t\tpmlcb\n");
- printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0),
- mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0));
- printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1),
- mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1));
- printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2),
- mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2));
- printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3),
- mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
-}
-
-static int fsl_booke_cpu_setup(struct op_counter_config *ctr)
-{
- int i;
-
- /* freeze all counters */
- pmc_stop_ctrs();
-
- for (i = 0;i < num_counters;i++) {
- init_pmc_stop(i);
-
- set_pmc_event(i, ctr[i].event);
-
- set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
- }
-
- return 0;
-}
-
-static int fsl_booke_reg_setup(struct op_counter_config *ctr,
- struct op_system_config *sys,
- int num_ctrs)
-{
- int i;
-
- num_counters = num_ctrs;
-
- /* Our counters count up, and "count" refers to
- * how much before the next interrupt, and we interrupt
- * on overflow. So we calculate the starting value
- * which will give us "count" until overflow.
- * Then we set the events on the enabled counters */
- for (i = 0; i < num_counters; ++i)
- reset_value[i] = 0x80000000UL - ctr[i].count;
-
- return 0;
-}
-
-static int fsl_booke_start(struct op_counter_config *ctr)
-{
- int i;
-
- mtmsr(mfmsr() | MSR_PMM);
-
- for (i = 0; i < num_counters; ++i) {
- if (ctr[i].enabled) {
- ctr_write(i, reset_value[i]);
- /* Set each enabled counter to only
- * count when the Mark bit is *not* set */
- set_pmc_marked(i, 1, 0);
- pmc_start_ctr(i, 1);
- } else {
- ctr_write(i, 0);
-
- /* Set the ctr to be stopped */
- pmc_start_ctr(i, 0);
- }
- }
-
- /* Clear the freeze bit, and enable the interrupt.
- * The counters won't actually start until the rfi clears
- * the PMM bit */
- pmc_start_ctrs(1);
-
- oprofile_running = 1;
-
- pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
- mfpmr(PMRN_PMGC0));
-
- return 0;
-}
-
-static void fsl_booke_stop(void)
-{
- /* freeze counters */
- pmc_stop_ctrs();
-
- oprofile_running = 0;
-
- pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
- mfpmr(PMRN_PMGC0));
-
- mb();
-}
-
-
-static void fsl_booke_handle_interrupt(struct pt_regs *regs,
- struct op_counter_config *ctr)
-{
- unsigned long pc;
- int is_kernel;
- int val;
- int i;
-
- /* set the PMM bit (see comment below) */
- mtmsr(mfmsr() | MSR_PMM);
-
- pc = regs->nip;
- is_kernel = is_kernel_addr(pc);
-
- for (i = 0; i < num_counters; ++i) {
- val = ctr_read(i);
- if (val < 0) {
- if (oprofile_running && ctr[i].enabled) {
- oprofile_add_ext_sample(pc, regs, i, is_kernel);
- ctr_write(i, reset_value[i]);
- } else {
- ctr_write(i, 0);
- }
- }
- }
-
- /* The freeze bit was set by the interrupt. */
- /* Clear the freeze bit, and reenable the interrupt.
- * The counters won't actually start until the rfi clears
- * the PMM bit */
- pmc_start_ctrs(1);
-}
-
-struct op_powerpc_model op_model_fsl_booke = {
- .reg_setup = fsl_booke_reg_setup,
- .cpu_setup = fsl_booke_cpu_setup,
- .start = fsl_booke_start,
- .stop = fsl_booke_stop,
- .handle_interrupt = fsl_booke_handle_interrupt,
-};
--- /dev/null
+/*
+ * Freescale Embedded oprofile support, based on ppc64 oprofile support
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/reg_fsl_emb.h>
+#include <asm/page.h>
+#include <asm/pmc.h>
+#include <asm/oprofile_impl.h>
+
+static unsigned long reset_value[OP_MAX_COUNTER];
+
+static int num_counters;
+static int oprofile_running;
+
+static inline u32 get_pmlca(int ctr)
+{
+ u32 pmlca;
+
+ switch (ctr) {
+ case 0:
+ pmlca = mfpmr(PMRN_PMLCA0);
+ break;
+ case 1:
+ pmlca = mfpmr(PMRN_PMLCA1);
+ break;
+ case 2:
+ pmlca = mfpmr(PMRN_PMLCA2);
+ break;
+ case 3:
+ pmlca = mfpmr(PMRN_PMLCA3);
+ break;
+ default:
+ panic("Bad ctr number\n");
+ }
+
+ return pmlca;
+}
+
+static inline void set_pmlca(int ctr, u32 pmlca)
+{
+ switch (ctr) {
+ case 0:
+ mtpmr(PMRN_PMLCA0, pmlca);
+ break;
+ case 1:
+ mtpmr(PMRN_PMLCA1, pmlca);
+ break;
+ case 2:
+ mtpmr(PMRN_PMLCA2, pmlca);
+ break;
+ case 3:
+ mtpmr(PMRN_PMLCA3, pmlca);
+ break;
+ default:
+ panic("Bad ctr number\n");
+ }
+}
+
+static inline unsigned int ctr_read(unsigned int i)
+{
+ switch(i) {
+ case 0:
+ return mfpmr(PMRN_PMC0);
+ case 1:
+ return mfpmr(PMRN_PMC1);
+ case 2:
+ return mfpmr(PMRN_PMC2);
+ case 3:
+ return mfpmr(PMRN_PMC3);
+ default:
+ return 0;
+ }
+}
+
+static inline void ctr_write(unsigned int i, unsigned int val)
+{
+ switch(i) {
+ case 0:
+ mtpmr(PMRN_PMC0, val);
+ break;
+ case 1:
+ mtpmr(PMRN_PMC1, val);
+ break;
+ case 2:
+ mtpmr(PMRN_PMC2, val);
+ break;
+ case 3:
+ mtpmr(PMRN_PMC3, val);
+ break;
+ default:
+ break;
+ }
+}
+
+
+static void init_pmc_stop(int ctr)
+{
+ u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU |
+ PMLCA_FCM1 | PMLCA_FCM0);
+ u32 pmlcb = 0;
+
+ switch (ctr) {
+ case 0:
+ mtpmr(PMRN_PMLCA0, pmlca);
+ mtpmr(PMRN_PMLCB0, pmlcb);
+ break;
+ case 1:
+ mtpmr(PMRN_PMLCA1, pmlca);
+ mtpmr(PMRN_PMLCB1, pmlcb);
+ break;
+ case 2:
+ mtpmr(PMRN_PMLCA2, pmlca);
+ mtpmr(PMRN_PMLCB2, pmlcb);
+ break;
+ case 3:
+ mtpmr(PMRN_PMLCA3, pmlca);
+ mtpmr(PMRN_PMLCB3, pmlcb);
+ break;
+ default:
+ panic("Bad ctr number!\n");
+ }
+}
+
+static void set_pmc_event(int ctr, int event)
+{
+ u32 pmlca;
+
+ pmlca = get_pmlca(ctr);
+
+ pmlca = (pmlca & ~PMLCA_EVENT_MASK) |
+ ((event << PMLCA_EVENT_SHIFT) &
+ PMLCA_EVENT_MASK);
+
+ set_pmlca(ctr, pmlca);
+}
+
+static void set_pmc_user_kernel(int ctr, int user, int kernel)
+{
+ u32 pmlca;
+
+ pmlca = get_pmlca(ctr);
+
+ if(user)
+ pmlca &= ~PMLCA_FCU;
+ else
+ pmlca |= PMLCA_FCU;
+
+ if(kernel)
+ pmlca &= ~PMLCA_FCS;
+ else
+ pmlca |= PMLCA_FCS;
+
+ set_pmlca(ctr, pmlca);
+}
+
+static void set_pmc_marked(int ctr, int mark0, int mark1)
+{
+ u32 pmlca = get_pmlca(ctr);
+
+ if(mark0)
+ pmlca &= ~PMLCA_FCM0;
+ else
+ pmlca |= PMLCA_FCM0;
+
+ if(mark1)
+ pmlca &= ~PMLCA_FCM1;
+ else
+ pmlca |= PMLCA_FCM1;
+
+ set_pmlca(ctr, pmlca);
+}
+
+static void pmc_start_ctr(int ctr, int enable)
+{
+ u32 pmlca = get_pmlca(ctr);
+
+ pmlca &= ~PMLCA_FC;
+
+ if (enable)
+ pmlca |= PMLCA_CE;
+ else
+ pmlca &= ~PMLCA_CE;
+
+ set_pmlca(ctr, pmlca);
+}
+
+static void pmc_start_ctrs(int enable)
+{
+ u32 pmgc0 = mfpmr(PMRN_PMGC0);
+
+ pmgc0 &= ~PMGC0_FAC;
+ pmgc0 |= PMGC0_FCECE;
+
+ if (enable)
+ pmgc0 |= PMGC0_PMIE;
+ else
+ pmgc0 &= ~PMGC0_PMIE;
+
+ mtpmr(PMRN_PMGC0, pmgc0);
+}
+
+static void pmc_stop_ctrs(void)
+{
+ u32 pmgc0 = mfpmr(PMRN_PMGC0);
+
+ pmgc0 |= PMGC0_FAC;
+
+ pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE);
+
+ mtpmr(PMRN_PMGC0, pmgc0);
+}
+
+static void dump_pmcs(void)
+{
+ printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0));
+ printk("pmc\t\tpmlca\t\tpmlcb\n");
+ printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0),
+ mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0));
+ printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1),
+ mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1));
+ printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2),
+ mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2));
+ printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3),
+ mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3));
+}
+
+static int fsl_emb_cpu_setup(struct op_counter_config *ctr)
+{
+ int i;
+
+ /* freeze all counters */
+ pmc_stop_ctrs();
+
+ for (i = 0;i < num_counters;i++) {
+ init_pmc_stop(i);
+
+ set_pmc_event(i, ctr[i].event);
+
+ set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
+ }
+
+ return 0;
+}
+
+static int fsl_emb_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int num_ctrs)
+{
+ int i;
+
+ num_counters = num_ctrs;
+
+ /* Our counters count up, and "count" refers to
+ * how much before the next interrupt, and we interrupt
+ * on overflow. So we calculate the starting value
+ * which will give us "count" until overflow.
+ * Then we set the events on the enabled counters */
+ for (i = 0; i < num_counters; ++i)
+ reset_value[i] = 0x80000000UL - ctr[i].count;
+
+ return 0;
+}
+
+static int fsl_emb_start(struct op_counter_config *ctr)
+{
+ int i;
+
+ mtmsr(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < num_counters; ++i) {
+ if (ctr[i].enabled) {
+ ctr_write(i, reset_value[i]);
+ /* Set each enabled counter to only
+ * count when the Mark bit is *not* set */
+ set_pmc_marked(i, 1, 0);
+ pmc_start_ctr(i, 1);
+ } else {
+ ctr_write(i, 0);
+
+ /* Set the ctr to be stopped */
+ pmc_start_ctr(i, 0);
+ }
+ }
+
+ /* Clear the freeze bit, and enable the interrupt.
+ * The counters won't actually start until the rfi clears
+ * the PMM bit */
+ pmc_start_ctrs(1);
+
+ oprofile_running = 1;
+
+ pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
+ mfpmr(PMRN_PMGC0));
+
+ return 0;
+}
+
+static void fsl_emb_stop(void)
+{
+ /* freeze counters */
+ pmc_stop_ctrs();
+
+ oprofile_running = 0;
+
+ pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
+ mfpmr(PMRN_PMGC0));
+
+ mb();
+}
+
+
+static void fsl_emb_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ unsigned long pc;
+ int is_kernel;
+ int val;
+ int i;
+
+ /* set the PMM bit (see comment below) */
+ mtmsr(mfmsr() | MSR_PMM);
+
+ pc = regs->nip;
+ is_kernel = is_kernel_addr(pc);
+
+ for (i = 0; i < num_counters; ++i) {
+ val = ctr_read(i);
+ if (val < 0) {
+ if (oprofile_running && ctr[i].enabled) {
+ oprofile_add_ext_sample(pc, regs, i, is_kernel);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+ }
+
+ /* The freeze bit was set by the interrupt. */
+ /* Clear the freeze bit, and reenable the interrupt.
+ * The counters won't actually start until the rfi clears
+ * the PMM bit */
+ pmc_start_ctrs(1);
+}
+
+struct op_powerpc_model op_model_fsl_emb = {
+ .reg_setup = fsl_emb_reg_setup,
+ .cpu_setup = fsl_emb_cpu_setup,
+ .start = fsl_emb_start,
+ .stop = fsl_emb_stop,
+ .handle_interrupt = fsl_emb_handle_interrupt,
+};
bool
config E500
+ select FSL_EMB_PERFMON
bool
config PPC_FPU
depends on E200 || E500
default y
+config FSL_EMB_PERFMON
+ bool
+
config PTE_64BIT
bool
depends on 44x || E500
PPC_OPROFILE_RS64 = 1,
PPC_OPROFILE_POWER4 = 2,
PPC_OPROFILE_G4 = 3,
- PPC_OPROFILE_BOOKE = 4,
+ PPC_OPROFILE_FSL_EMB = 4,
PPC_OPROFILE_CELL = 5,
PPC_OPROFILE_PA6T = 6,
};
int num_counters;
};
-extern struct op_powerpc_model op_model_fsl_booke;
+extern struct op_powerpc_model op_model_fsl_emb;
extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
extern struct op_powerpc_model op_model_7450;
#include <asm/reg_booke.h>
#endif /* CONFIG_BOOKE || CONFIG_40x */
+#ifdef CONFIG_FSL_EMB_PERFMON
+#include <asm/reg_fsl_emb.h>
+#endif
+
#ifdef CONFIG_8xx
#include <asm/reg_8xx.h>
#endif /* CONFIG_8xx */
#ifndef __ASM_POWERPC_REG_BOOKE_H__
#define __ASM_POWERPC_REG_BOOKE_H__
-#ifndef __ASSEMBLY__
-/* Performance Monitor Registers */
-#define mfpmr(rn) ({unsigned int rval; \
- asm volatile("mfpmr %0," __stringify(rn) \
- : "=r" (rval)); rval;})
-#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
-#endif /* __ASSEMBLY__ */
-
-/* Freescale Book E Performance Monitor APU Registers */
-#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
-#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
-#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
-#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
-#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
-#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
-#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
-#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
-
-#define PMLCA_FC 0x80000000 /* Freeze Counter */
-#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
-#define PMLCA_FCU 0x20000000 /* Freeze in User */
-#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
-#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
-#define PMLCA_CE 0x04000000 /* Condition Enable */
-
-#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
-#define PMLCA_EVENT_SHIFT 16
-
-#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
-#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
-#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
-#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
-
-#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
-#define PMLCB_THRESHMUL_SHIFT 8
-
-#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
-#define PMLCB_THRESHOLD_SHIFT 0
-
-#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
-
-#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
-#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
-#define PMGC0_FCECE 0x20000000 /* Freeze countes on
- Enabled Condition or
- Event */
-
-#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
-#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
-#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
-#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
-#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
-#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
-#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
-#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
-#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
-#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
-#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
-
-
/* Machine State Register (MSR) Fields */
#define MSR_UCLE (1<<26) /* User-mode cache lock enable */
#define MSR_SPE (1<<25) /* Enable SPE */
--- /dev/null
+/*
+ * Contains register definitions for the Freescale Embedded Performance
+ * Monitor.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
+#define __ASM_POWERPC_REG_FSL_EMB_H__
+
+#ifndef __ASSEMBLY__
+/* Performance Monitor Registers */
+#define mfpmr(rn) ({unsigned int rval; \
+ asm volatile("mfpmr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
+#endif /* __ASSEMBLY__ */
+
+/* Freescale Book E Performance Monitor APU Registers */
+#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */
+#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */
+#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */
+#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */
+#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */
+#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */
+#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */
+#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */
+
+#define PMLCA_FC 0x80000000 /* Freeze Counter */
+#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */
+#define PMLCA_FCU 0x20000000 /* Freeze in User */
+#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */
+#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */
+#define PMLCA_CE 0x04000000 /* Condition Enable */
+
+#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */
+#define PMLCA_EVENT_SHIFT 16
+
+#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */
+#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */
+#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
+#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
+
+#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_SHIFT 8
+
+#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
+#define PMLCB_THRESHOLD_SHIFT 0
+
+#define PMRN_PMGC0 0x190 /* PM Global Control 0 */
+
+#define PMGC0_FAC 0x80000000 /* Freeze all Counters */
+#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */
+#define PMGC0_FCECE 0x20000000 /* Freeze countes on
+ Enabled Condition or
+ Event */
+
+#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */
+#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */
+#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */
+#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */
+#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */
+#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */
+#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */
+#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */
+#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */
+#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */
+#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */
+
+
+#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */
+#endif /* __KERNEL__ */
projects / mirror_ubuntu-bionic-kernel.git / commitdiff