[POWERPC] Use Freescale pci/pcie common code for 85xx boards

Switch the 85xx platform over to using the FSL generic PCI code.  This
gets ups PCIe support in addition to base PCI support.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 629926e01e90217a9f08b392f656e221a817114b..526ddde2f1868b24f1d6efcc228682dfef923874 100644 (file)
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -50,9 +50,10 @@ config MPC8560
 config MPC85xx
        bool
        select PPC_UDBG_16550
-       select PPC_INDIRECT_PCI
-       select PPC_INDIRECT_PCI_BE
+       select PPC_INDIRECT_PCI if PCI
+       select PPC_INDIRECT_PCI_BE if PCI
        select MPIC
+       select FSL_PCI if PCI
        select SERIAL_8250_SHARE_IRQ if SERIAL_8250
        default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \
                || MPC85xx_MDS || MPC8544_DS

diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 4e02cbb14cf7460d65c34a8d4c1b03850b9371de..d70f2d0f9d367cdda63e60de88aeef0551dfe9e6 100644 (file)
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the PowerPC 85xx linux kernel.
 #
-obj-$(CONFIG_PPC_85xx) += misc.o pci.o
+obj-$(CONFIG_PPC_85xx) += misc.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o

diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
index 7286ffac2c1dbaeaf77c4b21568fa0523e99b2e5..5b34deef12b520f04fc574fb8fa816566f36704a 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx.h
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -15,4 +15,3 @@
  */
 
 extern void mpc85xx_restart(char *);
-extern int mpc85xx_add_bridge(struct device_node *dev);

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 7235f702394c91a3b7a66a2d9938c639da6dcd13..40a828675c7bd0b044f122be31a845544cf7a0a9 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -29,6 +29,7 @@
 #include <asm/udbg.h>
 
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include "mpc85xx.h"
 
 #ifdef CONFIG_CPM2
@@ -217,7 +218,7 @@ static void __init mpc85xx_ads_setup_arch(void)
 
 #ifdef CONFIG_PCI
        for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
-               mpc85xx_add_bridge(np);
+               fsl_add_bridge(np, 1);
        ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 }

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 50c8d6458362276a825df8510144df1b784b34f0..2539bb56069428f302f99ba1e5e9b0ee3908799d 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -45,6 +45,7 @@
 #include <asm/i8259.h>
 
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include "mpc85xx.h"
 
 static int cds_pci_slot = 2;
@@ -58,8 +59,6 @@ static volatile u8 *cadmus;
 static int mpc85xx_exclude_device(struct pci_controller *hose,
                                  u_char bus, u_char devfn)
 {
-       if ((bus == hose->first_busno) && PCI_SLOT(devfn) == 0)
-               return PCIBIOS_DEVICE_NOT_FOUND;
        /* We explicitly do not go past the Tundra 320 Bridge */
        if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
                return PCIBIOS_DEVICE_NOT_FOUND;
@@ -218,9 +217,14 @@ static void __init mpc85xx_cds_setup_arch(void)
        }
 
 #ifdef CONFIG_PCI
-       for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
-               mpc85xx_add_bridge(np);
-
+       for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
+               struct resource rsrc;
+               of_address_to_resource(np, 0, &rsrc);
+               if ((rsrc.start & 0xfffff) == 0x9000)
+                       fsl_add_bridge(np, 0);
+               else
+                       fsl_add_bridge(np, 1);
+       }
        ppc_md.pci_irq_fixup = mpc85xx_cds_pci_irq_fixup;
        ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif

diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 004b80bd0b846457bfa288367822a8ea24ca43cf..9aa96f065b252ee1fcdfa3879a8ad029169cd342 100644 (file)
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -46,6 +46,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
@@ -94,9 +95,8 @@ static void __init mpc85xx_mds_setup_arch(void)
        }
 
 #ifdef CONFIG_PCI
-       for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) {
-               mpc85xx_add_bridge(np);
-       }
+       for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
+               fsl_add_bridge(np, 1);
        of_node_put(np);
 #endif
 

diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c
deleted file mode 100644 (file)
index 8118417..0000000
--- a/arch/powerpc/platforms/85xx/pci.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * FSL SoC setup code
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-#ifdef CONFIG_PCI
-int __init mpc85xx_add_bridge(struct device_node *dev)
-{
-       int len;
-       struct pci_controller *hose;
-       struct resource rsrc;
-       const int *bus_range;
-       int primary = 1, has_address = 0;
-       phys_addr_t immr = get_immrbase();
-
-       DBG("Adding PCI host bridge %s\n", dev->full_name);
-
-       /* Fetch host bridge registers address */
-       has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
-       /* Get bus range if any */
-       bus_range = of_get_property(dev, "bus-range", &len);
-       if (bus_range == NULL || len < 2 * sizeof(int)) {
-               printk(KERN_WARNING "Can't get bus-range for %s, assume"
-                      " bus 0\n", dev->full_name);
-       }
-
-       pci_assign_all_buses = 1;
-       hose = pcibios_alloc_controller(dev);
-       if (!hose)
-               return -ENOMEM;
-
-       hose->first_busno = bus_range ? bus_range[0] : 0;
-       hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-       /* PCI 1 */
-       if ((rsrc.start & 0xfffff) == 0x8000) {
-               setup_indirect_pci(hose, immr + 0x8000, immr + 0x8004);
-       }
-       /* PCI 2 */
-       if ((rsrc.start & 0xfffff) == 0x9000) {
-               setup_indirect_pci(hose, immr + 0x9000, immr + 0x9004);
-               primary = 0;
-       }
-
-       printk(KERN_INFO "Found MPC85xx PCI host bridge at 0x%016llx. "
-              "Firmware bus number: %d->%d\n",
-               (unsigned long long)rsrc.start, hose->first_busno,
-               hose->last_busno);
-
-       DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-               hose, hose->cfg_addr, hose->cfg_data);
-
-       /* Interpret the "ranges" property */
-       /* This also maps the I/O region and sets isa_io/mem_base */
-       pci_process_bridge_OF_ranges(hose, dev, primary);
-
-       return 0;
-}
-
-#endif

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 69d3c6eee83d62256f7eb15c6197fee448288a38..2eefcde5b0da8d228b94c1615afe761de0de4946 100644 (file)
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -200,5 +200,12 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
        return 0;
 }
 
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0012, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0013, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0014, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0015, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0018, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x0019, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, 0x001a, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7010, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, 0x7011, quirk_fsl_pcie_transparent);