[TG3]: PHY fixes.

Some PHY related fixes:

1. Fix Serdes WoL.
2. Fix loopback test on 10/100 only devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 6af8ebcf35f0f8518bd3da1a8d894c8ed7f9dbab..14e964524969ed455056b54bbcdb57e087e468c7 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1117,6 +1117,12 @@ static void tg3_nvram_unlock(struct tg3 *);
 
 static void tg3_power_down_phy(struct tg3 *tp)
 {
+       if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)
+               return;
+
+       tg3_writephy(tp, MII_TG3_EXT_CTRL, MII_TG3_EXT_CTRL_FORCE_LED_OFF);
+       tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
+
        /* The PHY should not be powered down on some chips because
         * of bugs.
         */
@@ -1223,7 +1229,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
                        tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a);
                        udelay(40);
 
-                       mac_mode = MAC_MODE_PORT_MODE_MII;
+                       if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
+                               mac_mode = MAC_MODE_PORT_MODE_GMII;
+                       else
+                               mac_mode = MAC_MODE_PORT_MODE_MII;
 
                        if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 ||
                            !(tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB))
@@ -1301,15 +1310,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
        }
 
        if (!(tp->tg3_flags & TG3_FLAG_WOL_ENABLE) &&
-           !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) {
-               /* Turn off the PHY */
-               if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) {
-                       tg3_writephy(tp, MII_TG3_EXT_CTRL,
-                                    MII_TG3_EXT_CTRL_FORCE_LED_OFF);
-                       tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2);
-                       tg3_power_down_phy(tp);
-               }
-       }
+           !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF))
+               tg3_power_down_phy(tp);
 
        tg3_frob_aux_power(tp);
 
@@ -7889,7 +7891,7 @@ static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
        if (wol->wolopts & ~WAKE_MAGIC)
                return -EINVAL;
        if ((wol->wolopts & WAKE_MAGIC) &&
-           tp->tg3_flags2 & TG3_FLG2_PHY_SERDES &&
+           tp->tg3_flags2 & TG3_FLG2_ANY_SERDES &&
            !(tp->tg3_flags & TG3_FLAG_SERDES_WOL_CAP))
                return -EINVAL;
 
@@ -8573,12 +8575,22 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
                        return 0;
 
                mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
-                          MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY |
-                          MAC_MODE_PORT_MODE_GMII;
+                          MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY;
+               if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
+                       mac_mode |= MAC_MODE_PORT_MODE_MII;
+               else
+                       mac_mode |= MAC_MODE_PORT_MODE_GMII;
                tw32(MAC_MODE, mac_mode);
        } else if (loopback_mode == TG3_PHY_LOOPBACK) {
-               tg3_writephy(tp, MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX |
-                                          BMCR_SPEED1000);
+               u32 val;
+
+               val = BMCR_LOOPBACK | BMCR_FULLDPLX;
+               if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
+                       val |= BMCR_SPEED100;
+               else
+                       val |= BMCR_SPEED1000;
+
+               tg3_writephy(tp, MII_BMCR, val);
                udelay(40);
                /* reset to prevent losing 1st rx packet intermittently */
                if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
@@ -8587,7 +8599,11 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
                        tw32_f(MAC_RX_MODE, tp->rx_mode);
                }
                mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
-                          MAC_MODE_LINK_POLARITY | MAC_MODE_PORT_MODE_GMII;
+                          MAC_MODE_LINK_POLARITY;
+               if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
+                       mac_mode |= MAC_MODE_PORT_MODE_MII;
+               else
+                       mac_mode |= MAC_MODE_PORT_MODE_GMII;
                if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
                        mac_mode &= ~MAC_MODE_LINK_POLARITY;
                        tg3_writephy(tp, MII_TG3_EXT_CTRL,
@@ -8636,7 +8652,8 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 
        udelay(10);
 
-       for (i = 0; i < 10; i++) {
+       /* 250 usec to allow enough time on some 10/100 Mbps devices.  */
+       for (i = 0; i < 25; i++) {
                tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
                       HOSTCC_MODE_NOW);