Merge tag 'qcom-dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak...

Merge "Qualcomm ARM Based Device Tree Updates for v3.16" from Kumar Gala:

* Added device tree nodes for pinctrl and SDHC for msm8974 SoC/DB8074 board
* Added binding spec for GSBI configuration node

* tag 'qcom-dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  soc: qcom: Add device tree binding for GSBI
  ARM: dts: msm: Add SDHC controller nodes for MSM8974 and DB8074 board
  ARM: dts: MSM8974: Add pinctrl node

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
new file mode 100644 (file)
index 0000000..4ce24d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
@@ -0,0 +1,78 @@
+QCOM GSBI (General Serial Bus Interface) Driver
+
+The GSBI controller is modeled as a node with zero or more child nodes, each
+representing a serial sub-node device that is mux'd as part of the GSBI
+configuration settings.  The mode setting will govern the input/output mode of
+the 4 GSBI IOs.
+
+Required properties:
+- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
+- reg: Address range for GSBI registers
+- clocks: required clock
+- clock-names: must contain "iface" entry
+- qcom,mode : indicates MUX value for configuration of the serial interface.
+  Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+Optional properties:
+- qcom,crci : indicates CRCI MUX value for QUP CRCI ports.  Please reference
+  dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+
+Required properties if child node exists:
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: Must be present
+
+Properties for children:
+
+A GSBI controller node can contain 0 or more child nodes representing serial
+devices.  These serial devices can be a QCOM UART, I2C controller, spi
+controller, or some combination of aforementioned devices.
+
+See the following for child node definitions:
+Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
+Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+
+Example for APQ8064:
+
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+       gsbi4@16300000 {
+               compatible = "qcom,gsbi-v1.0.0";
+               reg = <0x16300000 0x100>;
+               clocks = <&gcc GSBI4_H_CLK>;
+               clock-names = "iface";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               qcom,mode = <GSBI_PROT_I2C_UART>;
+               qcom,crci = <GSBI_CRCI_QUP>;
+
+               /* child nodes go under here */
+
+               i2c_qup4: i2c@16380000 {
+                       compatible = "qcom,i2c-qup-v1.1.1";
+                       reg = <0x16380000 0x1000>;
+                       interrupts = <0 153 0>;
+
+                       clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+                       clock-names = "core", "iface";
+
+                       clock-frequency = <200000>;
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                };
+
+               uart4:  serial@16340000 {
+                       compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+                       reg = <0x16340000 0x1000>,
+                               <0x16300000 0x1000>;
+                       interrupts = <0 152 0x0>;
+                       clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+                       clock-names = "core", "iface";
+                       status = "ok";
+               };
+       };
+

diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 13ac3e222495c85f622e02d343f16e63a5363f6d..92320c4a76686a3bfafe5b0f340998fdb15fefbd 100644 (file)
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -3,4 +3,17 @@
 / {
        model = "Qualcomm APQ8074 Dragonboard";
        compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+       soc: soc {
+               sdhci@f9824900 {
+                       bus-width = <8>;
+                       non-removable;
+                       status = "ok";
+               };
+
+               sdhci@f98a4900 {
+                       cd-gpios = <&msmgpio 62 0x1>;
+                       bus-width = <4>;
+               };
+       };
 };

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index f68723918b3fe724fc671d1cd8045288221956c6..c530a33a10a0f8585368b2ed007c36aad7eacfc8 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -192,11 +192,62 @@
                        clock-names = "core", "iface";
                };
 
+               sdhci@f9824900 {
+                       compatible = "qcom,sdhci-msm-v4";
+                       reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+                       reg-names = "hc_mem", "core_mem";
+                       interrupts = <0 123 0>, <0 138 0>;
+                       interrupt-names = "hc_irq", "pwr_irq";
+                       clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+                       clock-names = "core", "iface";
+                       status = "disabled";
+               };
+
+               sdhci@f98a4900 {
+                       compatible = "qcom,sdhci-msm-v4";
+                       reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+                       reg-names = "hc_mem", "core_mem";
+                       interrupts = <0 125 0>, <0 221 0>;
+                       interrupt-names = "hc_irq", "pwr_irq";
+                       clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+                       clock-names = "core", "iface";
+                       status = "disabled";
+               };
+
                rng@f9bff000 {
                        compatible = "qcom,prng";
                        reg = <0xf9bff000 0x200>;
                        clocks = <&gcc GCC_PRNG_AHB_CLK>;
                        clock-names = "core";
                };
+
+               msmgpio: pinctrl@fd510000 {
+                       compatible = "qcom,msm8974-pinctrl";
+                       reg = <0xfd510000 0x4000>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       interrupts = <0 208 0>;
+
+                       spi8_default: spi8_default {
+                               mosi {
+                                       pins = "gpio45";
+                                       function = "blsp_spi8";
+                               };
+                               miso {
+                                       pins = "gpio46";
+                                       function = "blsp_spi8";
+                               };
+                               cs {
+                                       pins = "gpio47";
+                                       function = "blsp_spi8";
+                               };
+                               clk {
+                                       pins = "gpio48";
+                                       function = "blsp_spi8";
+                               };
+                       };
+               };
        };
 };

diff --git a/include/dt-bindings/soc/qcom,gsbi.h b/include/dt-bindings/soc/qcom,gsbi.h
new file mode 100644 (file)
index 0000000..7ac4292
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,gsbi.h
@@ -0,0 +1,26 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DT_BINDINGS_QCOM_GSBI_H
+#define __DT_BINDINGS_QCOM_GSBI_H
+
+#define GSBI_PROT_IDLE         0
+#define GSBI_PROT_I2C_UIM      1
+#define GSBI_PROT_I2C          2
+#define GSBI_PROT_SPI          3
+#define GSBI_PROT_UART_W_FC    4
+#define GSBI_PROT_UIM          5
+#define GSBI_PROT_I2C_UART     6
+
+#define GSBI_CRCI_QUP          0
+#define GSBI_CRCI_UART         1
+
+#endif