}
}
+static u32 ddi_buf_phy_link_rate(int port_clock)
+{
+ switch (port_clock) {
+ case 162000:
+ return DDI_BUF_PHY_LINK_RATE(0);
+ case 216000:
+ return DDI_BUF_PHY_LINK_RATE(4);
+ case 243000:
+ return DDI_BUF_PHY_LINK_RATE(5);
+ case 270000:
+ return DDI_BUF_PHY_LINK_RATE(1);
+ case 324000:
+ return DDI_BUF_PHY_LINK_RATE(6);
+ case 432000:
+ return DDI_BUF_PHY_LINK_RATE(7);
+ case 540000:
+ return DDI_BUF_PHY_LINK_RATE(2);
+ case 810000:
+ return DDI_BUF_PHY_LINK_RATE(3);
+ default:
+ MISSING_CASE(port_clock);
+ return DDI_BUF_PHY_LINK_RATE(0);
+ }
+}
+
static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0);
intel_dp->DP |= DDI_PORT_WIDTH(crtc_state->lane_count);
- if (IS_ALDERLAKE_P(i915) &&
- intel_phy_is_tc(i915, phy) && dig_port->tc_mode != TC_PORT_TBT_ALT)
- intel_dp->DP |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
+ if (IS_ALDERLAKE_P(i915) && intel_phy_is_tc(i915, phy)) {
+ intel_dp->DP |= ddi_buf_phy_link_rate(crtc_state->port_clock);
+ if (dig_port->tc_mode != TC_PORT_TBT_ALT)
+ intel_dp->DP |= DDI_BUF_CTL_TC_PHY_OWNERSHIP;
+ }
}
static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
/* In HDMI/DVI mode, the port width, and swing/emphasis values
* are ignored so nothing special needs to be done besides
* enabling the port.
+ *
+ * On ADL_P the PHY link rate and lane count must be programmed but
+ * these are both 0 for HDMI.
*/
intel_de_write(dev_priv, DDI_BUF_CTL(port),
dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE);
#define DDI_BUF_CTL_ENABLE (1 << 31)
#define DDI_BUF_TRANS_SELECT(n) ((n) << 24)
#define DDI_BUF_EMP_MASK (0xf << 24)
+#define DDI_BUF_PHY_LINK_RATE(r) ((r) << 20)
#define DDI_BUF_PORT_REVERSAL (1 << 16)
#define DDI_BUF_IS_IDLE (1 << 7)
#define DDI_BUF_CTL_TC_PHY_OWNERSHIP REG_BIT(6)