i2c-nforce2: Move status checking to a separate function

This is the first part of the patch that adds a function to reset the
nvidia MCP51/55 i2c controller, if something bad happens to it (e.g.
a slave sends a wrong byte count during a block transaction).

This patch just adds nforce2_check_status function. It was originally
written by Hans-Frieder Vogt.

The reason that I'm the one sending it is:
- I relied on it for the second part of the patch,
- It makes the driver code cleaner/better.

Signed-off-by: Oleg Ryjkov <olegr@olegr.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index c48140f782d09c276dcb4c6b31d5201dd213b6dd..1c63c4f2e4b6d79487fd1ae975bb4cd7738c6ccb 100644 (file)
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -98,15 +98,40 @@ struct nforce2_smbus {
 #define NVIDIA_SMB_PRTCL_BLOCK_DATA            0x0a
 #define NVIDIA_SMB_PRTCL_PEC                   0x80
 
+/* Misc definitions */
+#define MAX_TIMEOUT    100
+
 static struct pci_driver nforce2_driver;
 
+static int nforce2_check_status(struct i2c_adapter *adap)
+{
+       struct nforce2_smbus *smbus = adap->algo_data;
+       int timeout = 0;
+       unsigned char temp;
+
+       do {
+               msleep(1);
+               temp = inb_p(NVIDIA_SMB_STS);
+       } while ((!temp) && (timeout++ < MAX_TIMEOUT));
+
+       if (timeout >= MAX_TIMEOUT) {
+               dev_dbg(&adap->dev, "SMBus Timeout!\n");
+               return -1;
+       }
+       if (!(temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
+               dev_dbg(&adap->dev, "Transaction failed (0x%02x)!\n", temp);
+               return -1;
+       }
+       return 0;
+}
+
 /* Return -1 on error */
 static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
                unsigned short flags, char read_write,
                u8 command, int size, union i2c_smbus_data * data)
 {
        struct nforce2_smbus *smbus = adap->algo_data;
-       unsigned char protocol, pec, temp;
+       unsigned char protocol, pec;
        u8 len;
        int i;
 
@@ -170,21 +195,8 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
        outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR);
        outb_p(protocol, NVIDIA_SMB_PRTCL);
 
-       temp = inb_p(NVIDIA_SMB_STS);
-
-       if (~temp & NVIDIA_SMB_STS_DONE) {
-               udelay(500);
-               temp = inb_p(NVIDIA_SMB_STS);
-       }
-       if (~temp & NVIDIA_SMB_STS_DONE) {
-               msleep(10);
-               temp = inb_p(NVIDIA_SMB_STS);
-       }
-
-       if ((~temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) {
-               dev_dbg(&adap->dev, "SMBus Timeout! (0x%02x)\n", temp);
+       if (nforce2_check_status(adap))
                return -1;
-       }
 
        if (read_write == I2C_SMBUS_WRITE)
                return 0;
@@ -202,7 +214,12 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
 
                case I2C_SMBUS_BLOCK_DATA:
                        len = inb_p(NVIDIA_SMB_BCNT);
-                       len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
+                       if ((len <= 0) || (len > I2C_SMBUS_BLOCK_MAX)) {
+                               dev_err(&adap->dev, "Transaction failed "
+                                       "(received block size: 0x%02x)\n",
+                                       len);
+                               return -1;
+                       }
                        for (i = 0; i < len; i++)
                                data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
                        data->block[0] = len;