[media] anysee: reimplement demod and tuner attach

Use board ID as base value when selecting correct hardware configuration.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index d50118ccc105bd8a8a2b51984058d43073ce098c..ff9226e1843dee7a97190a3c4100b2c0778a48ef 100644 (file)
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -105,6 +105,27 @@ static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
        return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
 }
 
+/* write single register with mask */
+static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
+       u8 mask)
+{
+       int ret;
+       u8 tmp;
+
+       /* no need for read if whole reg is written */
+       if (mask != 0xff) {
+               ret = anysee_read_reg(d, reg, &tmp);
+               if (ret)
+                       return ret;
+
+               val &= mask;
+               tmp &= ~mask;
+               val |= tmp;
+       }
+
+       return anysee_write_reg(d, reg, val);
+}
+
 static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
 {
        u8 buf[] = {CMD_GET_HW_INFO};
@@ -244,134 +265,241 @@ static struct zl10353_config anysee_zl10353_config = {
        .parallel_ts = 1,
 };
 
+/*
+ * New USB device strings: Mfr=1, Product=2, SerialNumber=0
+ * Manufacturer: AMT.CO.KR
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
+ * PCB: ?
+ * parts: MT352, DTT7579(?), DNOS404ZH102A NIM
+ *
+ * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=????????
+ * PCB: ?
+ * parts: ZL10353, DTT7579(?), DNOS404ZH103A NIM
+ *
+ * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee"
+ * PCB: 507CD (rev1.1)
+ * parts: ZL10353, DTT7579(?), CST56I01, DNOS404ZH103A NIM
+ * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
+ * IOD[0] ZL10353 1=enabled
+ * IOA[7] TS 0=enabled
+ * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not)
+ *
+ * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)"
+ * PCB: 507DC (rev0.2)
+ * parts: TDA10023, CST56I01, DTOS403IH102B TM
+ * OEA=80 OEB=00 OEC=00 OED=ff OEF=fe
+ * IOD[0] TDA10023 1=enabled
+ *
+ * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev0.4)
+ * parts: TDA10023, TDA8024, DTOS403IH102B TM
+ * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ *
+ * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)"
+ * PCB: 507FA (rev1.1)
+ * parts: ZL10353, TDA10023, TDA8024, DTOS403IH102B TM
+ * OEA=80 OEB=00 OEC=ff OED=ff OEF=ff
+ * DVB-C:
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] tuner 1=enabled
+ * DVB-T:
+ * IOD[0] ZL10353 1=enabled
+ * IOE[0] tuner 0=enabled
+ * tuner is behind ZL10353 I2C-gate
+ */
+
 static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 {
        int ret;
        struct anysee_state *state = adap->dev->priv;
        u8 hw_info[3];
-       u8 io_d; /* IO port D */
 
-       /* check which hardware we have
-          We must do this call two times to get reliable values (hw bug). */
+       /* Check which hardware we have.
+        * We must do this call two times to get reliable values (hw bug).
+        */
        ret = anysee_get_hw_info(adap->dev, hw_info);
        if (ret)
-               return ret;
+               goto error;
+
        ret = anysee_get_hw_info(adap->dev, hw_info);
        if (ret)
-               return ret;
+               goto error;
 
        /* Meaning of these info bytes are guessed. */
        info("firmware version:%d.%d hardware id:%d",
                hw_info[1], hw_info[2], hw_info[0]);
 
-       ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
-       if (ret)
-               return ret;
-       deb_info("%s: IO port D:%02x\n", __func__, io_d);
-
-       /* Select demod using trial and error method. */
-
-       /* Try to attach demodulator in following order:
-             model      demod     hw  fw
-          1. E30        MT352     02  2.1
-          2. E30        ZL10353   02  2.1
-          3. E30 Combo  ZL10353   0f  1.2  DVB-T/C combo
-          4. E30 Plus   ZL10353   06  1.0
-          5. E30C Plus  TDA10023  0a  1.0  rev 0.2
-             E30C Plus  TDA10023  0f  1.2  rev 0.4
-             E30 Combo  TDA10023  0f  1.2  DVB-T/C combo
-       */
-
-       /* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
-       adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
-                             &adap->dev->i2c_adap);
-       if (adap->fe != NULL) {
-               state->tuner = DVB_PLL_THOMSON_DTT7579;
-               return 0;
-       }
+       state->hw = hw_info[0];
 
-       /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
-       adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
-                             &adap->dev->i2c_adap);
-       if (adap->fe != NULL) {
-               state->tuner = DVB_PLL_THOMSON_DTT7579;
-               return 0;
-       }
+       switch (state->hw) {
+       case ANYSEE_HW_02: /* 2 */
+               /* E30 */
 
-       /* for E30 Combo Plus DVB-T demodulator */
-       if (dvb_usb_anysee_delsys) {
-               ret = anysee_write_reg(adap->dev, 0xb0, 0x01);
-               if (ret)
-                       return ret;
+               /* attach demod */
+               adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
+                       &adap->dev->i2c_adap);
+               if (adap->fe)
+                       break;
 
-               /* Zarlink ZL10353 DVB-T demod */
+               /* attach demod */
                adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
-                                     &adap->dev->i2c_adap);
-               if (adap->fe != NULL) {
-                       state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
-                       return 0;
-               }
-       }
+                       &adap->dev->i2c_adap);
+               if (adap->fe)
+                       break;
 
-       /* connect demod on IO port D for TDA10023 & ZL10353 */
-       ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
-       if (ret)
-               return ret;
+               break;
+       case ANYSEE_HW_507CD: /* 6 */
+               /* E30 Plus */
 
-       /* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
-       adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
-                             &adap->dev->i2c_adap);
-       if (adap->fe != NULL) {
-               state->tuner = DVB_PLL_THOMSON_DTT7579;
-               return 0;
-       }
+               /* enable DVB-T demod on IOD[0] */
+               ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+               if (ret)
+                       goto error;
 
-       /* IO port E - E30C rev 0.4 board requires this */
-       ret = anysee_write_reg(adap->dev, 0xb1, 0xa7);
-       if (ret)
-               return ret;
+               /* enable transport stream on IOA[7] */
+               ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (0 << 7), 0x80);
+               if (ret)
+                       goto error;
 
-       /* Philips TDA10023 DVB-C demod */
-       adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
-                             &adap->dev->i2c_adap, 0x48);
-       if (adap->fe != NULL) {
-               state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
-               return 0;
-       }
+               /* attach demod */
+               adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+                       &adap->dev->i2c_adap);
+               if (adap->fe)
+                       break;
 
-       /* return IO port D to init value for safe */
-       ret = anysee_write_reg(adap->dev, 0xb0, io_d);
-       if (ret)
-               return ret;
+               break;
+       case ANYSEE_HW_507DC: /* 10 */
+               /* E30 C Plus */
+
+               /* enable DVB-C demod on IOD[0] */
+               ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0), 0x01);
+               if (ret)
+                       goto error;
+
+               /* attach demod */
+               adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
+                       &adap->dev->i2c_adap, 0x48);
+               if (adap->fe)
+                       break;
 
-       err("Unknown Anysee version: %02x %02x %02x. " \
-               "Please report the <linux-media@vger.kernel.org>.",
-               hw_info[0], hw_info[1], hw_info[2]);
+               break;
+       case ANYSEE_HW_507FA: /* 15 */
+               /* E30 Combo Plus */
+               /* E30 C Plus */
+
+               if (dvb_usb_anysee_delsys) {
+                       /* disable DVB-C demod on IOD[5] */
+                       ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 5),
+                               0x20);
+                       if (ret)
+                               goto error;
+
+                       /* enable DVB-T demod on IOD[0] */
+                       ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 0),
+                               0x01);
+                       if (ret)
+                               goto error;
+
+                       /* attach demod */
+                       adap->fe = dvb_attach(zl10353_attach,
+                               &anysee_zl10353_config, &adap->dev->i2c_adap);
+                       if (adap->fe)
+                               break;
+               } else {
+                       /* disable DVB-T demod on IOD[0] */
+                       ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (0 << 0),
+                               0x01);
+                       if (ret)
+                               goto error;
+
+                       /* enable DVB-C demod on IOD[5] */
+                       ret = anysee_wr_reg_mask(adap->dev, REG_IOD, (1 << 5),
+                               0x20);
+                       if (ret)
+                               goto error;
+
+                       /* attach demod */
+                       adap->fe = dvb_attach(tda10023_attach,
+                               &anysee_tda10023_config, &adap->dev->i2c_adap,
+                               0x48);
+                       if (adap->fe)
+                               break;
+               }
+               break;
+       }
 
-       return -ENODEV;
+       if (!adap->fe) {
+               /* we have no frontend :-( */
+               ret = -ENODEV;
+               err("Unknown Anysee version: %02x %02x %02x. " \
+                       "Please report the <linux-media@vger.kernel.org>.",
+                       hw_info[0], hw_info[1], hw_info[2]);
+       }
+error:
+       return ret;
 }
 
 static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 {
        struct anysee_state *state = adap->dev->priv;
+       int ret = 0;
        deb_info("%s:\n", __func__);
 
-       switch (state->tuner) {
-       case DVB_PLL_THOMSON_DTT7579:
-               /* Thomson dtt7579 (not sure) PLL inside of:
-                  Samsung DNOS404ZH102A NIM
-                  Samsung DNOS404ZH103A NIM */
+       switch (state->hw) {
+       case ANYSEE_HW_02: /* 2 */
+               /* E30 */
+
+               /* attach tuner */
                dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1),
                        NULL, DVB_PLL_THOMSON_DTT7579);
                break;
-       case DVB_PLL_SAMSUNG_DTOS403IH102A:
-               /* Unknown PLL inside of Samsung DTOS403IH102A tuner module */
+       case ANYSEE_HW_507CD: /* 6 */
+               /* E30 Plus */
+
+               /* attach tuner */
+               dvb_attach(dvb_pll_attach, adap->fe, (0xc2 >> 1),
+                       &adap->dev->i2c_adap, DVB_PLL_THOMSON_DTT7579);
+
+               break;
+       case ANYSEE_HW_507DC: /* 10 */
+               /* E30 C Plus */
+
+               /* attach tuner */
+               dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
+                       &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+               break;
+       case ANYSEE_HW_507FA: /* 15 */
+               /* E30 Combo Plus */
+               /* E30 C Plus */
+
+               if (dvb_usb_anysee_delsys) {
+                       /* enable DVB-T tuner on IOE[0] */
+                       ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (0 << 0),
+                               0x01);
+                       if (ret)
+                               goto error;
+               } else {
+                       /* enable DVB-C tuner on IOE[0] */
+                       ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 0),
+                               0x01);
+                       if (ret)
+                               goto error;
+               }
+
+               /* attach tuner */
                dvb_attach(dvb_pll_attach, adap->fe, (0xc0 >> 1),
                        &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+
                break;
+       default:
+               ret = -ENODEV;
        }
 
-       return 0;
+error:
+       return ret;
 }
 
 static int anysee_rc_query(struct dvb_usb_device *d)

diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
index 686e06044fcbd01b51b6e8d1f105a8b3dec46a0a..0f7b4d48a5c804c3ae7e7d78da490ed684da2cc3 100644 (file)
--- a/drivers/media/dvb/dvb-usb/anysee.h
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -57,10 +57,27 @@ enum cmd {
 };
 
 struct anysee_state {
-       u8 tuner;
+       u8 hw; /* PCB ID */
        u8 seq;
 };
 
+#define ANYSEE_HW_02     2 /* E30 */
+#define ANYSEE_HW_507CD  6 /* E30 Plus */
+#define ANYSEE_HW_507DC 10 /* E30 C Plus */
+#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
+#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
+
+#define REG_IOA       0x80 /* Port A (bit addressable) */
+#define REG_IOB       0x90 /* Port B (bit addressable) */
+#define REG_IOC       0xa0 /* Port C (bit addressable) */
+#define REG_IOD       0xb0 /* Port D (bit addressable) */
+#define REG_IOE       0xb1 /* Port E (NOT bit addressable) */
+#define REG_OEA       0xb2 /* Port A Output Enable */
+#define REG_OEB       0xb3 /* Port B Output Enable */
+#define REG_OEC       0xb4 /* Port C Output Enable */
+#define REG_OED       0xb5 /* Port D Output Enable */
+#define REG_OEE       0xb6 /* Port E Output Enable */
+
 #endif
 
 /***************************************************************************