V4L/DVB: tm6000: add card setup for terratec cinergy hybrid

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 0db31bc178133228911514a0f4e10ce3eefcbc10..54571c1e926c76e0e4bd1499369d94f9df52b22f 100644 (file)
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -332,6 +332,31 @@ int tm6000_cards_setup(struct tm6000_core *dev)
                tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_3, 0x01);
                msleep(11);
                break;
+       case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+               /* Turn zarlink zl10353 on */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x00);
+               msleep(15);
+               /* Reset zarlink zl10353 */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_1, 0x00);
+               msleep(50);
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_1, 0x01);
+               msleep(15);
+               /* Turn zarlink zl10353 off */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x01);
+               msleep(15);
+               /* ir ? */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_0, 0x01);
+               msleep(15);
+               /* Power led on (blue) */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_7, 0x00);
+               msleep(15);
+               /* DVB led off (orange) */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_5, 0x01);
+               msleep(15);
+               /* Turn zarlink zl10353 on */
+               tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6010_GPIO_4, 0x00);
+               msleep(15);
+               break;
        default:
                break;
        }