Description:
The /sys/devices/.../wakeup_count attribute contains the number
of signaled wakeup events associated with the device. This
- attribute is read-only. If the device is not enabled to wake up
+ attribute is read-only. If the device is not capable to wake up
the system from sleep states, this attribute is not present.
+ If the device is not enabled to wake up the system from sleep
+ states, this attribute is empty.
What: /sys/devices/.../power/wakeup_active_count
Date: September 2010
The /sys/devices/.../wakeup_active_count attribute contains the
number of times the processing of wakeup events associated with
the device was completed (at the kernel level). This attribute
- is read-only. If the device is not enabled to wake up the
- system from sleep states, this attribute is not present.
+ is read-only. If the device is not capable to wake up the
+ system from sleep states, this attribute is not present. If
+ the device is not enabled to wake up the system from sleep
+ states, this attribute is empty.
What: /sys/devices/.../power/wakeup_abort_count
Date: February 2012
number of times the processing of a wakeup event associated with
the device might have aborted system transition into a sleep
state in progress. This attribute is read-only. If the device
- is not enabled to wake up the system from sleep states, this
- attribute is not present.
+ is not capable to wake up the system from sleep states, this
+ attribute is not present. If the device is not enabled to wake
+ up the system from sleep states, this attribute is empty.
What: /sys/devices/.../power/wakeup_expire_count
Date: February 2012
The /sys/devices/.../wakeup_expire_count attribute contains the
number of times a wakeup event associated with the device has
been reported with a timeout that expired. This attribute is
- read-only. If the device is not enabled to wake up the system
- from sleep states, this attribute is not present.
+ read-only. If the device is not capable to wake up the system
+ from sleep states, this attribute is not present. If the
+ device is not enabled to wake up the system from sleep states,
+ this attribute is empty.
What: /sys/devices/.../power/wakeup_active
Date: September 2010
The /sys/devices/.../wakeup_active attribute contains either 1,
or 0, depending on whether or not a wakeup event associated with
the device is being processed (1). This attribute is read-only.
- If the device is not enabled to wake up the system from sleep
- states, this attribute is not present.
+ If the device is not capable to wake up the system from sleep
+ states, this attribute is not present. If the device is not
+ enabled to wake up the system from sleep states, this attribute
+ is empty.
What: /sys/devices/.../power/wakeup_total_time_ms
Date: September 2010
The /sys/devices/.../wakeup_total_time_ms attribute contains
the total time of processing wakeup events associated with the
device, in milliseconds. This attribute is read-only. If the
- device is not enabled to wake up the system from sleep states,
- this attribute is not present.
+ device is not capable to wake up the system from sleep states,
+ this attribute is not present. If the device is not enabled to
+ wake up the system from sleep states, this attribute is empty.
What: /sys/devices/.../power/wakeup_max_time_ms
Date: September 2010
The /sys/devices/.../wakeup_max_time_ms attribute contains
the maximum time of processing a single wakeup event associated
with the device, in milliseconds. This attribute is read-only.
- If the device is not enabled to wake up the system from sleep
- states, this attribute is not present.
+ If the device is not capable to wake up the system from sleep
+ states, this attribute is not present. If the device is not
+ enabled to wake up the system from sleep states, this attribute
+ is empty.
What: /sys/devices/.../power/wakeup_last_time_ms
Date: September 2010
signaling the last wakeup event associated with the device, in
milliseconds. This attribute is read-only. If the device is
not enabled to wake up the system from sleep states, this
- attribute is not present.
+ attribute is not present. If the device is not enabled to wake
+ up the system from sleep states, this attribute is empty.
What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms
Date: February 2012
The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute
contains the total time the device has been preventing
opportunistic transitions to sleep states from occurring.
- This attribute is read-only. If the device is not enabled to
+ This attribute is read-only. If the device is not capable to
wake up the system from sleep states, this attribute is not
- present.
+ present. If the device is not enabled to wake up the system
+ from sleep states, this attribute is empty.
What: /sys/devices/.../power/autosuspend_delay_ms
Date: September 2010
--- /dev/null
+* Freescale enhanced Direct Memory Access(eDMA) Controller
+
+ The eDMA channels have multiplex capability by programmble memory-mapped
+registers. channels are split into two groups, called DMAMUX0 and DMAMUX1,
+specific DMA request source can only be multiplexed by any channel of certain
+group, DMAMUX0 or DMAMUX1, but not both.
+
+* eDMA Controller
+Required properties:
+- compatible :
+ - "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
+- reg : Specifies base physical address(s) and size of the eDMA registers.
+ The 1st region is eDMA control register's address and size.
+ The 2nd and the 3rd regions are programmable channel multiplexing
+ control register's address and size.
+- interrupts : A list of interrupt-specifiers, one for each entry in
+ interrupt-names.
+- interrupt-names : Should contain:
+ "edma-tx" - the transmission interrupt
+ "edma-err" - the error interrupt
+- #dma-cells : Must be <2>.
+ The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1).
+ Specific request source can only be multiplexed by specific channels
+ group called DMAMUX.
+ The 2nd cell specifies the request source(slot) ID.
+ See the SoC's reference manual for all the supported request sources.
+- dma-channels : Number of channels supported by the controller
+- clock-names : A list of channel group clock names. Should contain:
+ "dmamux0" - clock name of mux0 group
+ "dmamux1" - clock name of mux1 group
+- clocks : A list of phandle and clock-specifier pairs, one for each entry in
+ clock-names.
+
+Optional properties:
+- big-endian: If present registers and hardware scatter/gather descriptors
+ of the eDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+
+Examples:
+
+edma0: dma-controller@40018000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40018000 0x2000>,
+ <0x40024000 0x1000>,
+ <0x40025000 0x1000>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX0>,
+ <&clks VF610_CLK_DMAMUX1>;
+};
+
+
+* DMA clients
+DMA client drivers that uses the DMA function must use the format described
+in the dma.txt file, using a two-cell specifier for each channel: the 1st
+specifies the channel group(DMAMUX) in which this request can be multiplexed,
+and the 2nd specifies the request source.
+
+Examples:
+
+sai2: sai@40031000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40031000 0x1000>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "sai";
+ clocks = <&clks VF610_CLK_SAI2>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 0 21>,
+ <&edma0 0 20>;
+ status = "disabled";
+};
--- /dev/null
+QCOM BAM DMA controller
+
+Required properties:
+- compatible: must contain "qcom,bam-v1.4.0" for MSM8974
+- reg: Address range for DMA registers
+- interrupts: Should contain the one interrupt shared by all channels
+- #dma-cells: must be <1>, the cell in the dmas property of the client device
+ represents the channel number
+- clocks: required clock
+- clock-names: must contain "bam_clk" entry
+- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
+ the secure world.
+
+Example:
+
+ uart-bam: dma@f9984000 = {
+ compatible = "qcom,bam-v1.4.0";
+ reg = <0xf9984000 0x15000>;
+ interrupts = <0 94 0>;
+ clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+DMA clients must use the format described in the dma.txt file, using a two cell
+specifier for each channel.
+
+Example:
+ serial@f991e000 {
+ compatible = "qcom,msm-uart";
+ reg = <0xf991e000 0x1000>
+ <0xf9944000 0x19000>;
+ interrupts = <0 108 0>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ dmas = <&uart-bam 0>, <&uart-bam 1>;
+ dma-names = "rx", "tx";
+ };
--- /dev/null
+* CSR SiRFSoC DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Should be "sirf,prima2-dmac" or "sirf,marco-dmac"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: must be <1>. used to represent the number of integer
+ cells in the dmas property of client device.
+- clocks: clock required
+
+Example:
+
+Controller:
+dmac0: dma-controller@b00b0000 {
+ compatible = "sirf,prima2-dmac";
+ reg = <0xb00b0000 0x10000>;
+ interrupts = <12>;
+ clocks = <&clks 24>;
+ #dma-cells = <1>;
+};
+
+
+Client:
+Fill the specific dma request line in dmas. In the below example, spi0 read
+channel request line is 9 of the 2nd dma controller, while write channel uses
+4 of the 2nd dma controller; spi1 read channel request line is 12 of the 1st
+dma controller, while write channel uses 13 of the 1st dma controller:
+
+spi0: spi@b00d0000 {
+ compatible = "sirf,prima2-spi";
+ dmas = <&dmac1 9>,
+ <&dmac1 4>;
+ dma-names = "rx", "tx";
+};
+
+spi1: spi@b0170000 {
+ compatible = "sirf,prima2-spi";
+ dmas = <&dmac0 12>,
+ <&dmac0 13>;
+ dma-names = "rx", "tx";
+};
- clocks: phandles to input clocks.
Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
- Child nodes conforming to i2c bus binding
Examples :
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi0_clk>;
+ clock-frequency = <400000>;
24c512@50 {
compatible = "24c512";
--- /dev/null
+Binding for the Cadence I2C controller
+
+Required properties:
+ - reg: Physical base address and size of the controller's register area.
+ - compatible: Compatibility string. Must be 'cdns,i2c-r1p10'.
+ - clocks: Input clock specifier. Refer to common clock bindings.
+ - interrupts: Interrupt specifier. Refer to interrupt bindings.
+ - #address-cells: Should be 1.
+ - #size-cells: Should be 0.
+
+Optional properties:
+ - clock-frequency: Desired operating frequency, in Hz, of the bus.
+ - clock-names: Input clock name, should be 'pclk'.
+
+Example:
+ i2c@e0004000 {
+ compatible = "cdns,i2c-r1p10";
+ clocks = <&clkc 38>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xe0004000 0x1000>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
This option is only supported in hardware blocks version 1.11a or newer.
+ - i2c-scl-falling-time : should contain the SCL falling time in nanoseconds.
+ This value which is by default 300ns is used to compute the tLOW period.
+
+ - i2c-sda-falling-time : should contain the SDA falling time in nanoseconds.
+ This value which is by default 300ns is used to compute the tHIGH period.
+
Example :
i2c@f0000 {
interrupts = <12 1>;
clock-frequency = <400000>;
i2c-sda-hold-time-ns = <300>;
+ i2c-sda-falling-time-ns = <300>;
+ i2c-scl-falling-time-ns = <300>;
};
--- /dev/null
+* Energymicro efm32 i2c controller
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "energymicro,efm32-i2c"
+ - interrupts : the interrupt number
+ - clocks : reference to the module clock
+
+Recommended properties :
+
+ - clock-frequency : maximal I2C bus clock frequency in Hz.
+ - efm32,location : Decides the location of the USART I/O pins.
+ Allowed range : [0 .. 6]
+
+Example:
+ i2c0: i2c@4000a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "energymicro,efm32-i2c";
+ reg = <0x4000a000 0x400>;
+ interrupts = <9>;
+ clocks = <&cmu clk_HFPERCLKI2C0>;
+ clock-frequency = <100000>;
+ status = "ok";
+ efm32,location = <3>;
+
+ eeprom@50 {
+ compatible = "microchip,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ };
+
Required properties :
- reg : Offset and length of the register set for the device
- - compatible : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
- or "marvell,mv78230-i2c" or "marvell,mv78230-a0-i2c"
- Note: Only use "marvell,mv78230-a0-i2c" for a very rare,
- initial version of the SoC which had broken offload
- support. Linux auto-detects this and sets it
- appropriately.
+ - compatible : Should be either:
+ - "allwinner,sun4i-i2c"
+ - "allwinner,sun6i-a31-i2c"
+ - "marvell,mv64xxx-i2c"
+ - "marvell,mv78230-i2c"
+ - "marvell,mv78230-a0-i2c"
+ * Note: Only use "marvell,mv78230-a0-i2c" for a
+ very rare, initial version of the SoC which
+ had broken offload support. Linux
+ auto-detects this and sets it appropriately.
- interrupts : The interrupt number
Optional properties :
- clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
default frequency is 100kHz
+ - resets : phandle to the parent reset controller. Mandatory
+ whenever you're using the "allwinner,sun6i-a31-i2c"
+ compatible.
+
Examples:
i2c@11000 {
"renesas,i2c-r8a7778"
"renesas,i2c-r8a7779"
"renesas,i2c-r8a7790"
+ "renesas,i2c-r8a7791"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt specifier.
Optional properties:
- clock-frequency: desired I2C bus clock frequency in Hz. The absence of this
propoerty indicates the default frequency 100 kHz.
+- clocks: clock specifier.
Examples :
-i2c0: i2c@e6500000 {
- compatible = "renesas,i2c-rcar-h2";
- reg = <0 0xe6500000 0 0x428>;
- interrupts = <0 174 0x4>;
+i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7791";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+ clock-frequency = <400000>;
};
--- /dev/null
+Qualcomm Universal Peripheral (QUP) I2C controller
+
+Required properties:
+ - compatible: Should be:
+ * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
+ * "qcom,i2c-qup-v2.1.1" for 8974 v1.
+ * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+
+ - clocks: A list of phandles + clock-specifiers, one for each entry in
+ clock-names.
+ - clock-names: Should contain:
+ * "core" for the core clock
+ * "iface" for the AHB clock
+
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional properties:
+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
+ defaults to 100kHz if omitted.
+
+Child nodes should conform to i2c bus binding.
+
+Example:
+
+ i2c@f9924000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9924000 0x1000>;
+ interrupts = <0 96 0>;
+
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ clock-frequency = <355000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
on). The "keep" setting will keep the LED at whatever its current
state is, without producing a glitch. The default is off if this
property is not present.
+- retain-state-suspended: (optional) The suspend state can be retained.Such
+ as charge-led gpio.
Examples:
default-state = "on";
};
};
+
+leds {
+ compatible = "gpio-leds";
+
+ charger-led {
+ gpios = <&gpio1 2 0>;
+ linux,default-trigger = "max8903-charger-charging";
+ retain-state-suspended;
+ };
+};
- fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
Sub-nodes:
+- leds : Contain the led nodes and initial register values in property
+ "led-control". Number of register depends of used IC, for MC13783 is 6,
+ for MC13892 is 4, for MC34708 is 1. See datasheet for bits definitions of
+ these registers.
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+ Each led node should contain "reg", which used as LED ID (described below).
+ Optional properties "label" and "linux,default-trigger" is described in
+ Documentation/devicetree/bindings/leds/common.txt.
- regulators : Contain the regulator nodes. The regulators are bound using
their names as listed below with their registers and bits for enabling.
+MC13783 LED IDs:
+ 0 : Main display
+ 1 : AUX display
+ 2 : Keypad
+ 3 : Red 1
+ 4 : Green 1
+ 5 : Blue 1
+ 6 : Red 2
+ 7 : Green 2
+ 8 : Blue 2
+ 9 : Red 3
+ 10 : Green 3
+ 11 : Blue 3
+
+MC13892 LED IDs:
+ 0 : Main display
+ 1 : AUX display
+ 2 : Keypad
+ 3 : Red
+ 4 : Green
+ 5 : Blue
+
+MC34708 LED IDs:
+ 0 : Charger Red
+ 1 : Charger Green
+
MC13783 regulators:
sw1a : regulator SW1A (register 24, bit 0)
sw1b : regulator SW1B (register 25, bit 0)
interrupt-parent = <&gpio0>;
interrupts = <8>;
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ led-control = <0x000 0x000 0x0e0 0x000>;
+
+ sysled {
+ reg = <3>;
+ label = "system:red:live";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
regulators {
sw1_reg: mc13892__sw1 {
regulator-min-microvolt = <600000>;
this system, even if the controller claims it is.
- cap-sd-highspeed: SD high-speed timing is supported
- cap-mmc-highspeed: MMC high-speed timing is supported
+- sd-uhs-sdr12: SD UHS SDR12 speed is supported
+- sd-uhs-sdr25: SD UHS SDR25 speed is supported
+- sd-uhs-sdr50: SD UHS SDR50 speed is supported
+- sd-uhs-sdr104: SD UHS SDR104 speed is supported
+- sd-uhs-ddr50: SD UHS DDR50 speed is supported
- cap-power-off-card: powering off the card is safe
- cap-sdio-irq: enable SDIO IRQ signalling on this interface
- full-pwr-cycle: full power cycle of the card is supported
+- mmc-highspeed-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
+- mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
+- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
+- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
*NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
polarity properties, we have to fix the meaning of the "normal" and "inverted"
--- /dev/null
+* Qualcomm SDHCI controller (sdhci-msm)
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-msm driver.
+
+Required properties:
+- compatible: Should contain "qcom,sdhci-msm-v4".
+- reg: Base address and length of the register in the following order:
+ - Host controller register map (required)
+ - SD Core register map (required)
+- interrupts: Should contain an interrupt-specifiers for the interrupts:
+ - Host controller interrupt (required)
+- pinctrl-names: Should contain only one value - "default".
+- pinctrl-0: Should specify pin control groups used for this controller.
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
+- clock-names: Should contain the following:
+ "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
+ "core" - SDC MMC clock (MCLK) (required)
+ "bus" - SDCC bus voter clock (optional)
+
+Example:
+
+ sdhc_1: sdhci@f9824900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+ interrupts = <0 123 0>;
+ bus-width = <8>;
+ non-removable;
+
+ vmmc = <&pm8941_l20>;
+ vqmmc = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
+
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ sdhc_2: sdhci@f98a4900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ interrupts = <0 125 0>;
+ bus-width = <4>;
+ cd-gpios = <&msmgpio 62 0x1>;
+
+ vmmc = <&pm8941_l21>;
+ vqmmc = <&pm8941_l13>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
Required properties:
-- compatible: Should be "mrvl,pxav2-mmc" or "mrvl,pxav3-mmc".
+- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
+ "marvell,armada-380-sdhci".
+- reg:
+ * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
+ the SDHCI registers.
+ * for "marvell,armada-380-sdhci", two register areas. The first one
+ for the SDHCI registers themselves, and the second one for the
+ AXI/Mbus bridge registers of the SDHCI unit.
Optional properties:
- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
non-removable;
mrvl,clk-delay-cycles = <31>;
};
+
+sdhci@d8000 {
+ compatible = "marvell,armada-380-sdhci";
+ reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+ interrupts = <0 25 0x4>;
+ clocks = <&gateclk 17>;
+ mrvl,clk-delay-cycles = <0x1F>;
+};
- compatible:
Should be "ti,omap2-hsmmc", for OMAP2 controllers
Should be "ti,omap3-hsmmc", for OMAP3 controllers
+ Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0
Should be "ti,omap4-hsmmc", for OMAP4 controllers
- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
--- /dev/null
+PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+ - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
+- reg: pbias register offset from syscon base and size of pbias register.
+- syscon : phandle of the system control module
+- regulator-name : should be
+ pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs
+ pbias_sim_omap3 for OMAP3 SoCs
+ pbias_mmc_omap4 for OMAP4 SoCs
+ pbias_mmc_omap5 for OMAP5 and DRA7 SoC
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0 0x4>;
+ syscon = <&omap5_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
have.
- interrupt-parent: The phandle for the interrupt controller that
services interrupts for this device.
-- fsl,mode: The operating mode for the SSI interface.
- "i2s-slave" - I2S mode, SSI is clock slave
- "i2s-master" - I2S mode, SSI is clock master
- "lj-slave" - left-justified mode, SSI is clock slave
- "lj-master" - l.j. mode, SSI is clock master
- "rj-slave" - right-justified mode, SSI is clock slave
- "rj-master" - r.j., SSI is clock master
- "ac97-slave" - AC97 mode, SSI is clock slave
- "ac97-master" - AC97 mode, SSI is clock master
- fsl,playback-dma: Phandle to a node for the DMA channel to use for
playback of audio. This is typically dictated by SOC
design. See the notes below.
be connected together, and SRFS and STFS be connected
together. This would still allow different sample sizes,
but not different sample rates.
+ - clocks: "ipg" - Required clock for the SSI unit
+ "baud" - Required clock for SSI master mode. Otherwise this
+ clock is not used
Required are also ac97 link bindings if ac97 is used. See
Documentation/devicetree/bindings/sound/soc-ac97link.txt for the necessary
Documentation/devicetree/bindings/dma/dma.txt.
- dma-names: Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
is not defined.
+- fsl,mode: The operating mode for the SSI interface.
+ "i2s-slave" - I2S mode, SSI is clock slave
+ "i2s-master" - I2S mode, SSI is clock master
+ "lj-slave" - left-justified mode, SSI is clock slave
+ "lj-master" - l.j. mode, SSI is clock master
+ "rj-slave" - right-justified mode, SSI is clock slave
+ "rj-master" - r.j., SSI is clock master
+ "ac97-slave" - AC97 mode, SSI is clock slave
+ "ac97-master" - AC97 mode, SSI is clock master
Child 'codec' node required properties:
- compatible: Compatible list, contains the name of the codec
- interrupts: pair specifying rx and tx irq
- clocks: phandle to the spi clock
- cs-gpios: see spi-bus.txt
-- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values.
+
+Recommended properties :
+- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to
+ configure the pinmux for the device, see datasheet for values.
+ If "efm32,location" property is not provided, keeping what is
+ already configured in the hardware, so its either the reset
+ default 0 or whatever the bootloader did.
Example:
--- /dev/null
+gpio-backlight bindings
+
+Required properties:
+ - compatible: "gpio-backlight"
+ - gpios: describes the gpio that is used for enabling/disabling the backlight.
+ refer to bindings/gpio/gpio.txt for more details.
+
+Optional properties:
+ - default-on: enable the backlight at boot.
+
+Example:
+ backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
*.a
*.aux
+*.bc
*.bin
*.bz2
*.cis
*.i
*.jpeg
*.ko
+*.ll
*.log
*.lst
*.lzma
*.out
*.patch
*.pdf
+*.plist
*.png
*.pot
*.ps
unsigned long *);
int (*migratepage)(struct address_space *, struct page *, struct page *);
int (*launder_page)(struct page *);
- int (*is_partially_uptodate)(struct page *, read_descriptor_t *, unsigned long);
+ int (*is_partially_uptodate)(struct page *, unsigned long, unsigned long);
int (*error_remove_page)(struct address_space *, struct page *);
int (*swap_activate)(struct file *);
int (*swap_deactivate)(struct file *);
/* migrate the contents of a page to the specified target */
int (*migratepage) (struct page *, struct page *);
int (*launder_page) (struct page *);
- int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
+ int (*is_partially_uptodate) (struct page *, unsigned long,
unsigned long);
void (*is_dirty_writeback) (struct page *, bool *, bool *);
int (*error_remove_page) (struct mapping *mapping, struct page *page);
* Intel Wellsburg (PCH)
* Intel Coleto Creek (PCH)
* Intel Wildcat Point-LP (PCH)
+ * Intel BayTrail (SOC)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
and write_block_data commands
I2C_FUNC_SMBUS_I2C_BLOCK Handles the SMBus read_i2c_block_data
and write_i2c_block_data commands
- I2C_FUNC_SMBUS_EMUL Handles all SMBus commands than can be
+ I2C_FUNC_SMBUS_EMUL Handles all SMBus commands that can be
emulated by a real I2C adapter (using
the transparent emulation layer)
S (1 bit) : Start bit
P (1 bit) : Stop bit
Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) : Accept and reverse accept bit.
-Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
+A, NA (1 bit) : Accept and reverse accept bit.
+Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to
get a 10 bit I2C address.
Comm (8 bits): Command byte, a data byte which often selects a register on
the device.
Modified transactions
=====================
-The following modifications to the I2C protocol can also be generated,
-with the exception of I2C_M_NOSTART these are usually only needed to
-work around device issues:
+The following modifications to the I2C protocol can also be generated by
+setting these flags for i2c messages. With the exception of I2C_M_NOSTART, they
+are usually only needed to work around device issues:
- Flag I2C_M_NOSTART:
+I2C_M_IGNORE_NAK:
+ Normally message is interrupted immediately if there is [NA] from the
+ client. Setting this flag treats any [NA] as [A], and all of
+ message is sent.
+ These messages may still fail to SCL lo->hi timeout.
+
+I2C_M_NO_RD_ACK:
+ In a read message, master A/NA bit is skipped.
+
+I2C_M_NOSTART:
In a combined transaction, no 'S Addr Wr/Rd [A]' is generated at some
point. For example, setting I2C_M_NOSTART on the second partial message
generates something like:
I2C device but may also be used between direction changes by some
rare devices.
- Flags I2C_M_REV_DIR_ADDR
+I2C_M_REV_DIR_ADDR:
This toggles the Rd/Wr flag. That is, if you want to do a write, but
need to emit an Rd instead of a Wr, or vice versa, you set this
flag. For example:
S Addr Rd [A] Data [A] Data [A] ... [A] Data [A] P
- Flags I2C_M_IGNORE_NAK
- Normally message is interrupted immediately if there is [NA] from the
- client. Setting this flag treats any [NA] as [A], and all of
- message is sent.
- These messages may still fail to SCL lo->hi timeout.
-
- Flags I2C_M_NO_RD_ACK
- In a read message, master A/NA bit is skipped.
+I2C_M_STOP:
+ Force a stop condition (P) after the message. Some I2C related protocols
+ like SCCB require that. Normally, you really don't want to get interrupted
+ between the messages of one transfer.
pcmv= [HW,PCMCIA] BadgePAD 4
+ pd_ignore_unused
+ [PM]
+ Keep all power-domains already enabled by bootloader on,
+ even if no driver has claimed them. This is useful
+ for debug and development, but should not be
+ needed on a platform with proper driver support.
+
pd. [PARIDE]
See Documentation/blockdev/paride.txt.
N: zynq
N: xilinx
F: drivers/clocksource/cadence_ttc_timer.c
+F: drivers/i2c/busses/i2c-cadence.c
F: drivers/mmc/host/sdhci-of-arasan.c
ARM SMMU DRIVER
I2C SUBSYSTEM
M: Wolfram Sang <wsa@the-dreams.de>
L: linux-i2c@vger.kernel.org
-W: http://i2c.wiki.kernel.org/
+W: https://i2c.wiki.kernel.org/
+Q: https://patchwork.ozlabs.org/project/linux-i2c/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
S: Maintained
F: Documentation/i2c/
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
M: Chris Ball <chris@printf.net>
+M: Ulf Hansson <ulf.hansson@linaro.org>
L: linux-mmc@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
S: Maintained
OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <bharrosh@panasas.com>
-M: Benny Halevy <bhalevy@tonian.com>
+M: Benny Halevy <bhalevy@primarydata.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
T: git git://git.open-osd.org/open-osd.git
HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
HOSTCXXFLAGS = -O2
+ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
+HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \
+ -Wno-missing-field-initializers -fno-delete-null-pointer-checks
+endif
+
# Decide whether to build built-in, modular, or both.
# Normally, just do built-in.
export quiet Q KBUILD_VERBOSE
+ifneq ($(CC),)
+ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
+COMPILER := clang
+else
+COMPILER := gcc
+endif
+export COMPILER
+endif
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
-fno-strict-aliasing -fno-common \
-Werror-implicit-function-declaration \
-Wno-format-security \
- -fno-delete-null-pointer-checks
+ $(call cc-option,-fno-delete-null-pointer-checks,)
KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS := -D__ASSEMBLY__
endif
KBUILD_CFLAGS += $(stackp-flag)
+ifeq ($(COMPILER),clang)
+KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
+KBUILD_CPPFLAGS += $(call cc-option,-Wno-unknown-warning-option,)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
+KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
+# Quiet clang warning: comparison of unsigned expression < 0 is always false
+KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
+# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
+# source of a reference will be _MergedGlobals and not on of the whitelisted names.
+# See modpost pattern 2
+KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
+else
+
# This warning generated too much noise in a regular build.
# Use make W=1 to enable this warning (see scripts/Makefile.build)
KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+endif
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
+ select HAVE_ARCH_AUDITSYSCALL
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
select ODD_RT_SIGACTION
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select HARDIRQS_SW_RESEND
+ select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_KGDB
select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
reg = <0xb00b0000 0x10000>;
interrupts = <12>;
clocks = <&clks 24>;
+ #dma-cells = <1>;
};
dmac1: dma-controller@b0160000 {
reg = <0xb0160000 0x10000>;
interrupts = <13>;
clocks = <&clks 25>;
+ #dma-cells = <1>;
};
vip@b00C0000 {
ti,hwmods = "counter_32k";
};
+ dra7_ctrl_general: tisyscon@4a002e00 {
+ compatible = "syscon";
+ reg = <0x4a002e00 0x7c>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0 0x4>;
+ syscon = <&dra7_ctrl_general>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
dra7_pmx_core: pinmux@4a003400 {
compatible = "pinctrl-single";
reg = <0x4a003400 0x0464>;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
status = "disabled";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
pinctrl-single,function-mask = <0x3f>;
};
+ omap2_scm_general: tisyscon@49002270 {
+ compatible = "syscon";
+ reg = <0x49002270 0x240>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x230 0x4>;
+ syscon = <&omap2_scm_general>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
gpio1: gpio@4900c000 {
compatible = "ti,omap2-gpio";
reg = <0x4900c000 0x200>;
ti,dual-volt;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
};
&mmc1 {
+ /* See 35xx errata 2.1.1.128 in SPRZ278F */
+ compatible = "ti,omap3-pre-es3-hsmmc";
vmmc-supply = <&vmmc1>;
bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+ status="disabled";
+};
+
+&mmc3 {
+ status="disabled";
};
&omap3_pmx_core {
0x174 (PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
>;
};
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ >;
+ };
};
&usb_otg_hs {
pinctrl-single,function-mask = <0xff1f>;
};
+ omap3_scm_general: tisyscon@48002270 {
+ compatible = "syscon";
+ reg = <0x48002270 0x2f0>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x2b0 0x4>;
+ syscon = <&omap3_scm_general>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
gpio1: gpio@48310000 {
compatible = "ti,omap3-gpio";
reg = <0x48310000 0x200>;
ti,dual-volt;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
pinctrl-single,function-mask = <0x7fff>;
};
+ omap4_padconf_global: tisyscon@4a1005a0 {
+ compatible = "syscon";
+ reg = <0x4a1005a0 0x170>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap4_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap4 {
+ regulator-name = "pbias_mmc_omap4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
ti,needs-special-reset;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
pinctrl-single,function-mask = <0x7fff>;
};
+ omap5_padconf_global: tisyscon@4a002da0 {
+ compatible = "syscon";
+ reg = <0x4A002da0 0xec>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap5_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
ti,needs-special-reset;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
+ pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
reg = <0xb00b0000 0x10000>;
interrupts = <12>;
clocks = <&clks 24>;
+ #dma-cells = <1>;
};
dmac1: dma-controller@b0160000 {
reg = <0xb0160000 0x10000>;
interrupts = <13>;
clocks = <&clks 25>;
+ #dma-cells = <1>;
};
vip@b00C0000 {
CONFIG_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_TPS65217=y
CONFIG_REGULATOR_TPS65910=y
CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_PBIAS=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
#include <asm/ptrace.h>
#include <asm/domain.h>
#include <asm/opcodes-virt.h>
+#include <asm/asm-offsets.h>
#define IOMEM(x) (x)
restore_irqs_notrace \oldcpsr
.endm
+/*
+ * Get current thread_info.
+ */
+ .macro get_thread_info, rd
+ ARM( mov \rd, sp, lsr #13 )
+ THUMB( mov \rd, sp )
+ THUMB( lsr \rd, \rd, #13 )
+ mov \rd, \rd, lsl #13
+ .endm
+
+/*
+ * Increment/decrement the preempt count.
+ */
+#ifdef CONFIG_PREEMPT_COUNT
+ .macro inc_preempt_count, ti, tmp
+ ldr \tmp, [\ti, #TI_PREEMPT] @ get preempt count
+ add \tmp, \tmp, #1 @ increment it
+ str \tmp, [\ti, #TI_PREEMPT]
+ .endm
+
+ .macro dec_preempt_count, ti, tmp
+ ldr \tmp, [\ti, #TI_PREEMPT] @ get preempt count
+ sub \tmp, \tmp, #1 @ decrement it
+ str \tmp, [\ti, #TI_PREEMPT]
+ .endm
+
+ .macro dec_preempt_count_ti, ti, tmp
+ get_thread_info \ti
+ dec_preempt_count \ti, \tmp
+ .endm
+#else
+ .macro inc_preempt_count, ti, tmp
+ .endm
+
+ .macro dec_preempt_count, ti, tmp
+ .endm
+
+ .macro dec_preempt_count_ti, ti, tmp
+ .endm
+#endif
+
#define USER(x...) \
9999: x; \
.pushsection __ex_table,"a"; \
#define cpu_is_xscale() 1
#endif
+/*
+ * Marvell's PJ4 core is based on V7 version. It has some modification
+ * for coprocessor setting. For this reason, we need a way to distinguish
+ * it.
+ */
+#ifndef CONFIG_CPU_PJ4
+#define cpu_is_pj4() 0
+#else
+static inline int cpu_is_pj4(void)
+{
+ unsigned int id;
+
+ id = read_cpuid_id();
+ if ((id & 0xfffffff0) == 0x562f5840)
+ return 1;
+
+ return 0;
+}
+#endif
#endif
#ifndef _ASM_ARM_SYSCALL_H
#define _ASM_ARM_SYSCALL_H
-#include <linux/audit.h> /* for AUDIT_ARCH_* */
+#include <uapi/linux/audit.h> /* for AUDIT_ARCH_* */
#include <linux/elf.h> /* for ELF_EM */
#include <linux/err.h>
#include <linux/sched.h>
memcpy(®s->ARM_r0 + i, args, n * sizeof(args[0]));
}
-static inline int syscall_get_arch(struct task_struct *task,
- struct pt_regs *regs)
+static inline int syscall_get_arch(void)
{
/* ARM tasks don't change audit architectures on the fly. */
return AUDIT_ARCH_ARM;
if (!csize)
return 0;
- vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+ vaddr = ioremap(__pfn_to_phys(pfn), PAGE_SIZE);
if (!vaddr)
return -ENOMEM;
movs pc, lr @ return & move spsr_svc into cpsr
.endm
- .macro get_thread_info, rd
- mov \rd, sp, lsr #13
- mov \rd, \rd, lsl #13
- .endm
-
@
@ 32-bit wide "mov pc, reg"
@
.endm
#endif /* ifdef CONFIG_CPU_V7M / else */
- .macro get_thread_info, rd
- mov \rd, sp
- lsr \rd, \rd, #13
- mov \rd, \rd, lsl #13
- .endm
-
@
@ 32-bit wide "mov pc, reg"
@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <asm/opcodes.h>
#include "kprobes.h"
if (handler) {
/* We can emulate the instruction in (possibly) modified form */
- asi->insn[0] = (insn & 0xfff00000) | (rn << 16) | reglist;
+ asi->insn[0] = __opcode_to_mem_arm((insn & 0xfff00000) |
+ (rn << 16) | reglist);
asi->insn_handler = handler;
return INSN_GOOD;
}
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm/system_info.h>
+#include <asm/opcodes.h>
#include "kprobes-test.h"
TEST_SUPPORTED("cmp sp, #0x1000");
/* Data-processing with PC as shift*/
- TEST_UNSUPPORTED(".word 0xe15c0f1e @ cmp r12, r14, asl pc")
- TEST_UNSUPPORTED(".word 0xe1a0cf1e @ mov r12, r14, asl pc")
- TEST_UNSUPPORTED(".word 0xe08caf1e @ add r10, r12, r14, asl pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe15c0f1e) " @ cmp r12, r14, asl pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe1a0cf1e) " @ mov r12, r14, asl pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe08caf1e) " @ add r10, r12, r14, asl pc")
/* Data-processing with PC as shift*/
TEST_UNSUPPORTED("movs pc, r1")
TEST("mrs r0, cpsr")
TEST("mrspl r7, cpsr")
TEST("mrs r14, cpsr")
- TEST_UNSUPPORTED(".word 0xe10ff000 @ mrs r15, cpsr")
+ TEST_UNSUPPORTED(__inst_arm(0xe10ff000) " @ mrs r15, cpsr")
TEST_UNSUPPORTED("mrs r0, spsr")
TEST_UNSUPPORTED("mrs lr, spsr")
TEST_R("clzeq r7, r",14,0x1,"")
TEST_R("clz lr, r",7, 0xffffffff,"")
TEST( "clz r4, sp")
- TEST_UNSUPPORTED(".word 0x016fff10 @ clz pc, r0")
- TEST_UNSUPPORTED(".word 0x016f0f1f @ clz r0, pc")
+ TEST_UNSUPPORTED(__inst_arm(0x016fff10) " @ clz pc, r0")
+ TEST_UNSUPPORTED(__inst_arm(0x016f0f1f) " @ clz r0, pc")
#if __LINUX_ARM_ARCH__ >= 6
TEST_UNSUPPORTED("bxj r0")
TEST_BF_R("blx r",0,2f,"")
TEST_BB_R("blx r",7,2f,"")
TEST_BF_R("blxeq r",14,2f,"")
- TEST_UNSUPPORTED(".word 0x0120003f @ blx pc")
+ TEST_UNSUPPORTED(__inst_arm(0x0120003f) " @ blx pc")
TEST_RR( "qadd r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "qaddvs lr, r",9, VAL2,", r",8, VAL1,"")
TEST_RR( "qdsub r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "qdsubvs lr, r",9, VAL2,", r",8, VAL1,"")
TEST_R( "qdsub lr, r",9, VAL2,", r13")
- TEST_UNSUPPORTED(".word 0xe101f050 @ qadd pc, r0, r1")
- TEST_UNSUPPORTED(".word 0xe121f050 @ qsub pc, r0, r1")
- TEST_UNSUPPORTED(".word 0xe141f050 @ qdadd pc, r0, r1")
- TEST_UNSUPPORTED(".word 0xe161f050 @ qdsub pc, r0, r1")
- TEST_UNSUPPORTED(".word 0xe16f2050 @ qdsub r2, r0, pc")
- TEST_UNSUPPORTED(".word 0xe161205f @ qdsub r2, pc, r1")
+ TEST_UNSUPPORTED(__inst_arm(0xe101f050) " @ qadd pc, r0, r1")
+ TEST_UNSUPPORTED(__inst_arm(0xe121f050) " @ qsub pc, r0, r1")
+ TEST_UNSUPPORTED(__inst_arm(0xe141f050) " @ qdadd pc, r0, r1")
+ TEST_UNSUPPORTED(__inst_arm(0xe161f050) " @ qdsub pc, r0, r1")
+ TEST_UNSUPPORTED(__inst_arm(0xe16f2050) " @ qdsub r2, r0, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe161205f) " @ qdsub r2, pc, r1")
TEST_UNSUPPORTED("bkpt 0xffff")
TEST_UNSUPPORTED("bkpt 0x0000")
- TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")
+ TEST_UNSUPPORTED(__inst_arm(0xe1600070) " @ smc #0")
TEST_GROUP("Halfword multiply and multiply-accumulate")
TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "smlabbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "smlabb lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe10f3281) " @ smlabb pc, r1, r2, r3")
TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "smlatbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "smlatb lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe10f32a1) " @ smlatb pc, r1, r2, r3")
TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "smlabtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "smlabt lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe10f32c1) " @ smlabt pc, r1, r2, r3")
TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "smlattge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "smlatt lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe10f32e1) " @ smlatt pc, r1, r2, r3")
TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "smlawbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "smlawb lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe12f3281) " @ smlawb pc, r1, r2, r3")
TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "smlawtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "smlawt lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3")
- TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3")
- TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe12f32c1) " @ smlawt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe12032cf) " @ smlawt r0, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe1203fc1) " @ smlawt r0, r1, pc, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe120f2c1) " @ smlawt r0, r1, r2, pc")
TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "smulwbge r7, r",8, VAL3,", r",9, VAL1,"")
TEST_R( "smulwb lr, r",1, VAL2,", r13")
- TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe12f02a1) " @ smulwb pc, r1, r2")
TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "smulwtge r7, r",8, VAL3,", r",9, VAL1,"")
TEST_R( "smulwt lr, r",1, VAL2,", r13")
- TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe12f02e1) " @ smulwt pc, r1, r2")
TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
TEST_RRRR( "smlalbble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
TEST_RRR( "smlalbb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
- TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe14f1382) " @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe141f382) " @ smlalbb r1, pc, r2, r3")
TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
TEST_RRRR( "smlaltble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
TEST_RRR( "smlaltb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
- TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe14f13a2) " @ smlaltb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe141f3a2) " @ smlaltb r1, pc, r2, r3")
TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
TEST_RRRR( "smlalbtle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
TEST_RRR( "smlalbt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
- TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe14f13c2) " @ smlalbt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe141f3c2) " @ smlalbt r1, pc, r2, r3")
TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
TEST_RRRR( "smlalttle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
TEST_RRR( "smlaltt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
- TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3")
- TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3")
- TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe14f13e2) " @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe140f3e2) " @ smlalbb r0, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe14013ef) " @ smlalbb r0, r1, pc, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe1401fe2) " @ smlalbb r0, r1, r2, pc")
TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "smulbbge r7, r",8, VAL3,", r",9, VAL1,"")
TEST_R( "smulbb lr, r",1, VAL2,", r13")
- TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe16f0281) " @ smulbb pc, r1, r2")
TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "smultbge r7, r",8, VAL3,", r",9, VAL1,"")
TEST_R( "smultb lr, r",1, VAL2,", r13")
- TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe16f02a1) " @ smultb pc, r1, r2")
TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "smulbtge r7, r",8, VAL3,", r",9, VAL1,"")
TEST_R( "smulbt lr, r",1, VAL2,", r13")
- TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe16f02c1) " @ smultb pc, r1, r2")
TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "smulttge r7, r",8, VAL3,", r",9, VAL1,"")
TEST_R( "smultt lr, r",1, VAL2,", r13")
- TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2")
- TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2")
- TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe16f02e1) " @ smultt pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe16002ef) " @ smultt r0, pc, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe1600fe1) " @ smultt r0, r1, pc")
TEST_GROUP("Multiply and multiply-accumulate")
TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "mulls r7, r",8, VAL2,", r",9, VAL2,"")
TEST_R( "mul lr, r",4, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2")
- TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2")
- TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe00f0291) " @ mul pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe000029f) " @ mul r0, pc, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe0000f91) " @ mul r0, r1, pc")
TEST_RR( "muls r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "mullss r7, r",8, VAL2,", r",9, VAL2,"")
TEST_R( "muls lr, r",4, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_arm(0xe01f0291) " @ muls pc, r1, r2")
TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "mlahi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "mla lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe02f3291) " @ mla pc, r1, r2, r3")
TEST_RRR( "mlas r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "mlahis r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "mlas lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe03f3291) " @ mlas pc, r1, r2, r3")
#if __LINUX_ARM_ARCH__ >= 6
TEST_RR( "umaal r0, r1, r",2, VAL1,", r",3, VAL2,"")
TEST_RR( "umaalls r7, r8, r",9, VAL2,", r",10, VAL1,"")
TEST_R( "umaal lr, r12, r",11,VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
- TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+ TEST_UNSUPPORTED(__inst_arm(0xe041f392) " @ umaal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe04f0392) " @ umaal r0, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0500090) " @ undef")
+ TEST_UNSUPPORTED(__inst_arm(0xe05fff9f) " @ undef")
#endif
#if __LINUX_ARM_ARCH__ >= 7
TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3")
- TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe06f3291) " @ mls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe060329f) " @ mls r0, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0603f91) " @ mls r0, r1, pc, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe060f291) " @ mls r0, r1, r2, pc")
#endif
- TEST_UNSUPPORTED(".word 0xe0700090 @ undef")
- TEST_UNSUPPORTED(".word 0xe07fff9f @ undef")
+ TEST_UNSUPPORTED(__inst_arm(0xe0700090) " @ undef")
+ TEST_UNSUPPORTED(__inst_arm(0xe07fff9f) " @ undef")
TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
TEST_RR( "umullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
TEST_R( "umull lr, r12, r",11,VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe081f392) " @ umull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe08f1392) " @ umull r1, pc, r2, r3")
TEST_RR( "umulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
TEST_RR( "umulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
TEST_R( "umulls lr, r12, r",11,VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe091f392) " @ umulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe09f1392) " @ umulls r1, pc, r2, r3")
TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
TEST_RRRR( "umlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
TEST_RRR( "umlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
- TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0af1392) " @ umlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0a1f392) " @ umlal r1, pc, r2, r3")
TEST_RRRR( "umlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
TEST_RRRR( "umlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
TEST_RRR( "umlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
- TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0bf1392) " @ umlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0b1f392) " @ umlals r1, pc, r2, r3")
TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
TEST_RR( "smullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
TEST_R( "smull lr, r12, r",11,VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0c1f392) " @ smull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0cf1392) " @ smull r1, pc, r2, r3")
TEST_RR( "smulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
TEST_RR( "smulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
TEST_R( "smulls lr, r12, r",11,VAL3,", r13")
- TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0d1f392) " @ smulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0df1392) " @ smulls r1, pc, r2, r3")
TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
TEST_RRRR( "smlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
TEST_RRR( "smlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
- TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0ef1392) " @ smlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0e1f392) " @ smlal r1, pc, r2, r3")
TEST_RRRR( "smlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
TEST_RRRR( "smlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
TEST_RRR( "smlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
- TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3")
- TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3")
- TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe0ff1392) " @ smlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0f0f392) " @ smlals r0, pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0f0139f) " @ smlals r0, r1, pc, r3")
+ TEST_UNSUPPORTED(__inst_arm(0xe0f01f92) " @ smlals r0, r1, r2, pc")
TEST_GROUP("Synchronization primitives")
TEST_R( "swpvs r0, r",1,VAL1,", [sp]")
TEST_RP("swp sp, r",14,VAL2,", [r",12,13*4,"]")
#else
- TEST_UNSUPPORTED(".word 0xe108e097 @ swp lr, r7, [r8]")
- TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs r0, r1, [sp]")
- TEST_UNSUPPORTED(".word 0xe10cd09e @ swp sp, r14 [r12]")
+ TEST_UNSUPPORTED(__inst_arm(0xe108e097) " @ swp lr, r7, [r8]")
+ TEST_UNSUPPORTED(__inst_arm(0x610d0091) " @ swpvs r0, r1, [sp]")
+ TEST_UNSUPPORTED(__inst_arm(0xe10cd09e) " @ swp sp, r14 [r12]")
#endif
- TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
- TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
- TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
+ TEST_UNSUPPORTED(__inst_arm(0xe102f091) " @ swp pc, r1, [r2]")
+ TEST_UNSUPPORTED(__inst_arm(0xe102009f) " @ swp r0, pc, [r2]")
+ TEST_UNSUPPORTED(__inst_arm(0xe10f0091) " @ swp r0, r1, [pc]")
#if __LINUX_ARM_ARCH__ < 6
TEST_RP("swpb lr, r",7,VAL2,", [r",8,0,"]")
TEST_R( "swpvsb r0, r",1,VAL1,", [sp]")
#else
- TEST_UNSUPPORTED(".word 0xe148e097 @ swpb lr, r7, [r8]")
- TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb r0, r1, [sp]")
+ TEST_UNSUPPORTED(__inst_arm(0xe148e097) " @ swpb lr, r7, [r8]")
+ TEST_UNSUPPORTED(__inst_arm(0x614d0091) " @ swpvsb r0, r1, [sp]")
#endif
- TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
-
- TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe1200090") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe1300090") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe1500090") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe1600090") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe142f091) " @ swpb pc, r1, [r2]")
+
+ TEST_UNSUPPORTED(__inst_arm(0xe1100090)) /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe1200090)) /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe1300090)) /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe1500090)) /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe1600090)) /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe1700090)) /* Unallocated space */
#if __LINUX_ARM_ARCH__ >= 6
TEST_UNSUPPORTED("ldrex r2, [sp]")
#endif
TEST_RPR( "strneh r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
TEST_RPR( "strh r",2, VAL1,", [r",3, 24,"], r",4, 48,"")
TEST_RPR( "strh r",10,VAL2,", [r",9, 48,"], -r",11,24,"")
- TEST_UNSUPPORTED(".word 0xe1afc0ba @ strh r12, [pc, r10]!")
- TEST_UNSUPPORTED(".word 0xe089f0bb @ strh pc, [r9], r11")
- TEST_UNSUPPORTED(".word 0xe089a0bf @ strh r10, [r9], pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe1afc0ba) " @ strh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe089f0bb) " @ strh pc, [r9], r11")
+ TEST_UNSUPPORTED(__inst_arm(0xe089a0bf) " @ strh r10, [r9], pc")
TEST_PR( "ldrh r0, [r",0, 48,", -r",2, 24,"]")
TEST_PR( "ldrcsh r14, [r",13,0, ", r",12, 48,"]")
TEST_PR( "ldrcch r12, [r",11,48,", -r",10,24,"]!")
TEST_PR( "ldrh r2, [r",3, 24,"], r",4, 48,"")
TEST_PR( "ldrh r10, [r",9, 48,"], -r",11,24,"")
- TEST_UNSUPPORTED(".word 0xe1bfc0ba @ ldrh r12, [pc, r10]!")
- TEST_UNSUPPORTED(".word 0xe099f0bb @ ldrh pc, [r9], r11")
- TEST_UNSUPPORTED(".word 0xe099a0bf @ ldrh r10, [r9], pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe1bfc0ba) " @ ldrh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe099f0bb) " @ ldrh pc, [r9], r11")
+ TEST_UNSUPPORTED(__inst_arm(0xe099a0bf) " @ ldrh r10, [r9], pc")
TEST_RP( "strh r",0, VAL1,", [r",1, 24,", #-2]")
TEST_RP( "strmih r",14,VAL2,", [r",13,0, ", #2]")
TEST_RP( "strplh r",12,VAL2,", [r",11,24,", #-4]!")
TEST_RP( "strh r",2, VAL1,", [r",3, 24,"], #48")
TEST_RP( "strh r",10,VAL2,", [r",9, 64,"], #-48")
- TEST_UNSUPPORTED(".word 0xe1efc3b0 @ strh r12, [pc, #48]!")
- TEST_UNSUPPORTED(".word 0xe0c9f3b0 @ strh pc, [r9], #48")
+ TEST_UNSUPPORTED(__inst_arm(0xe1efc3b0) " @ strh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe0c9f3b0) " @ strh pc, [r9], #48")
TEST_P( "ldrh r0, [r",0, 24,", #-2]")
TEST_P( "ldrvsh r14, [r",13,0, ", #2]")
TEST_P( "ldrh r2, [r",3, 24,"], #48")
TEST_P( "ldrh r10, [r",9, 64,"], #-48")
TEST( "ldrh r0, [pc, #0]")
- TEST_UNSUPPORTED(".word 0xe1ffc3b0 @ ldrh r12, [pc, #48]!")
- TEST_UNSUPPORTED(".word 0xe0d9f3b0 @ ldrh pc, [r9], #48")
+ TEST_UNSUPPORTED(__inst_arm(0xe1ffc3b0) " @ ldrh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe0d9f3b0) " @ ldrh pc, [r9], #48")
TEST_PR( "ldrsb r0, [r",0, 48,", -r",2, 24,"]")
TEST_PR( "ldrhisb r14, [r",13,0,", r",12, 48,"]")
TEST_PR( "ldrlssb r12, [r",11,48,", -r",10,24,"]!")
TEST_PR( "ldrsb r2, [r",3, 24,"], r",4, 48,"")
TEST_PR( "ldrsb r10, [r",9, 48,"], -r",11,24,"")
- TEST_UNSUPPORTED(".word 0xe1bfc0da @ ldrsb r12, [pc, r10]!")
- TEST_UNSUPPORTED(".word 0xe099f0db @ ldrsb pc, [r9], r11")
+ TEST_UNSUPPORTED(__inst_arm(0xe1bfc0da) " @ ldrsb r12, [pc, r10]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe099f0db) " @ ldrsb pc, [r9], r11")
TEST_P( "ldrsb r0, [r",0, 24,", #-1]")
TEST_P( "ldrgesb r14, [r",13,0, ", #1]")
TEST_P( "ldrsb r2, [r",3, 24,"], #48")
TEST_P( "ldrsb r10, [r",9, 64,"], #-48")
TEST( "ldrsb r0, [pc, #0]")
- TEST_UNSUPPORTED(".word 0xe1ffc3d0 @ ldrsb r12, [pc, #48]!")
- TEST_UNSUPPORTED(".word 0xe0d9f3d0 @ ldrsb pc, [r9], #48")
+ TEST_UNSUPPORTED(__inst_arm(0xe1ffc3d0) " @ ldrsb r12, [pc, #48]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe0d9f3d0) " @ ldrsb pc, [r9], #48")
TEST_PR( "ldrsh r0, [r",0, 48,", -r",2, 24,"]")
TEST_PR( "ldrgtsh r14, [r",13,0, ", r",12, 48,"]")
TEST_PR( "ldrlesh r12, [r",11,48,", -r",10,24,"]!")
TEST_PR( "ldrsh r2, [r",3, 24,"], r",4, 48,"")
TEST_PR( "ldrsh r10, [r",9, 48,"], -r",11,24,"")
- TEST_UNSUPPORTED(".word 0xe1bfc0fa @ ldrsh r12, [pc, r10]!")
- TEST_UNSUPPORTED(".word 0xe099f0fb @ ldrsh pc, [r9], r11")
+ TEST_UNSUPPORTED(__inst_arm(0xe1bfc0fa) " @ ldrsh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe099f0fb) " @ ldrsh pc, [r9], r11")
TEST_P( "ldrsh r0, [r",0, 24,", #-1]")
TEST_P( "ldreqsh r14, [r",13,0 ,", #1]")
TEST_P( "ldrsh r2, [r",3, 24,"], #48")
TEST_P( "ldrsh r10, [r",9, 64,"], #-48")
TEST( "ldrsh r0, [pc, #0]")
- TEST_UNSUPPORTED(".word 0xe1ffc3f0 @ ldrsh r12, [pc, #48]!")
- TEST_UNSUPPORTED(".word 0xe0d9f3f0 @ ldrsh pc, [r9], #48")
+ TEST_UNSUPPORTED(__inst_arm(0xe1ffc3f0) " @ ldrsh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe0d9f3f0) " @ ldrsh pc, [r9], #48")
#if __LINUX_ARM_ARCH__ >= 7
TEST_UNSUPPORTED("strht r1, [r2], r3")
TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
TEST_RPR( "strd r",2, VAL1,", [r",5, 24,"], r",4,48,"")
TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
- TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe1afc0fa) " @ strd r12, [pc, r10]!")
TEST_PR( "ldrd r0, [r",0, 48,", -r",2,24,"]")
TEST_PR( "ldrmid r8, [r",13,0, ", r",12,48,"]")
TEST_PR( "ldrpld r6, [r",11,48,", -r",10,24,"]!")
TEST_PR( "ldrd r2, [r",5, 24,"], r",4,48,"")
TEST_PR( "ldrd r10, [r",9,48,"], -r",7,24,"")
- TEST_UNSUPPORTED(".word 0xe1afc0da @ ldrd r12, [pc, r10]!")
- TEST_UNSUPPORTED(".word 0xe089f0db @ ldrd pc, [r9], r11")
- TEST_UNSUPPORTED(".word 0xe089e0db @ ldrd lr, [r9], r11")
- TEST_UNSUPPORTED(".word 0xe089c0df @ ldrd r12, [r9], pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe1afc0da) " @ ldrd r12, [pc, r10]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe089f0db) " @ ldrd pc, [r9], r11")
+ TEST_UNSUPPORTED(__inst_arm(0xe089e0db) " @ ldrd lr, [r9], r11")
+ TEST_UNSUPPORTED(__inst_arm(0xe089c0df) " @ ldrd r12, [r9], pc")
TEST_RP( "strd r",0, VAL1,", [r",1, 24,", #-8]")
TEST_RP( "strvsd r",8, VAL2,", [r",13,0, ", #8]")
TEST_RP( "strvcd r",12,VAL2,", [r",11,24,", #-16]!")
TEST_RP( "strd r",2, VAL1,", [r",4, 24,"], #48")
TEST_RP( "strd r",10,VAL2,", [r",9, 64,"], #-48")
- TEST_UNSUPPORTED(".word 0xe1efc3f0 @ strd r12, [pc, #48]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe1efc3f0) " @ strd r12, [pc, #48]!")
TEST_P( "ldrd r0, [r",0, 24,", #-8]")
TEST_P( "ldrhid r8, [r",13,0, ", #8]")
TEST_P( "ldrlsd r6, [r",11,24,", #-16]!")
TEST_P( "ldrd r2, [r",5, 24,"], #48")
TEST_P( "ldrd r10, [r",9,6,"], #-48")
- TEST_UNSUPPORTED(".word 0xe1efc3d0 @ ldrd r12, [pc, #48]!")
- TEST_UNSUPPORTED(".word 0xe0c9f3d0 @ ldrd pc, [r9], #48")
- TEST_UNSUPPORTED(".word 0xe0c9e3d0 @ ldrd lr, [r9], #48")
+ TEST_UNSUPPORTED(__inst_arm(0xe1efc3d0) " @ ldrd r12, [pc, #48]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe0c9f3d0) " @ ldrd pc, [r9], #48")
+ TEST_UNSUPPORTED(__inst_arm(0xe0c9e3d0) " @ ldrd lr, [r9], #48")
TEST_GROUP("Miscellaneous")
TEST("movw r0, #0")
TEST("movw r0, #0xffff")
TEST("movw lr, #0xffff")
- TEST_UNSUPPORTED(".word 0xe300f000 @ movw pc, #0")
+ TEST_UNSUPPORTED(__inst_arm(0xe300f000) " @ movw pc, #0")
TEST_R("movt r",0, VAL1,", #0")
TEST_R("movt r",0, VAL2,", #0xffff")
TEST_R("movt r",14,VAL1,", #0xffff")
- TEST_UNSUPPORTED(".word 0xe340f000 @ movt pc, #0")
+ TEST_UNSUPPORTED(__inst_arm(0xe340f000) " @ movt pc, #0")
#endif
TEST_UNSUPPORTED("msr cpsr, 0x13")
#ifdef CONFIG_THUMB2_KERNEL
TEST_ARM_TO_THUMB_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
#endif
- TEST_UNSUPPORTED(".word 0xe5af6008 @ str r6, [pc, #8]!")
- TEST_UNSUPPORTED(".word 0xe7af6008 @ str r6, [pc, r8]!")
- TEST_UNSUPPORTED(".word 0xe5bf6008 @ ldr r6, [pc, #8]!")
- TEST_UNSUPPORTED(".word 0xe7bf6008 @ ldr r6, [pc, r8]!")
- TEST_UNSUPPORTED(".word 0xe788600f @ str r6, [r8, pc]")
- TEST_UNSUPPORTED(".word 0xe798600f @ ldr r6, [r8, pc]")
+ TEST_UNSUPPORTED(__inst_arm(0xe5af6008) " @ str r6, [pc, #8]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe7af6008) " @ str r6, [pc, r8]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe5bf6008) " @ ldr r6, [pc, #8]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe7bf6008) " @ ldr r6, [pc, r8]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe788600f) " @ str r6, [r8, pc]")
+ TEST_UNSUPPORTED(__inst_arm(0xe798600f) " @ ldr r6, [r8, pc]")
LOAD_STORE("b")
- TEST_UNSUPPORTED(".word 0xe5f7f008 @ ldrb pc, [r7, #8]!")
- TEST_UNSUPPORTED(".word 0xe7f7f008 @ ldrb pc, [r7, r8]!")
- TEST_UNSUPPORTED(".word 0xe5ef6008 @ strb r6, [pc, #8]!")
- TEST_UNSUPPORTED(".word 0xe7ef6008 @ strb r6, [pc, r3]!")
- TEST_UNSUPPORTED(".word 0xe5ff6008 @ ldrb r6, [pc, #8]!")
- TEST_UNSUPPORTED(".word 0xe7ff6008 @ ldrb r6, [pc, r3]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe5f7f008) " @ ldrb pc, [r7, #8]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe7f7f008) " @ ldrb pc, [r7, r8]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe5ef6008) " @ strb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe7ef6008) " @ strb r6, [pc, r3]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe5ff6008) " @ ldrb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(__inst_arm(0xe7ff6008) " @ ldrb r6, [pc, r3]!")
TEST_UNSUPPORTED("ldrt r0, [r1], #4")
TEST_UNSUPPORTED("ldrt r1, [r2], r3")
#if __LINUX_ARM_ARCH__ >= 7
TEST_GROUP("Parallel addition and subtraction, signed")
- TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe6000010) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe60fffff) "") /* Unallocated space */
TEST_RR( "sadd16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "sadd16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe61cff1a @ sadd16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe61cff1a) " @ sadd16 pc, r12, r10")
TEST_RR( "sasx r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "sasx r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe61cff3a @ sasx pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe61cff3a) " @ sasx pc, r12, r10")
TEST_RR( "ssax r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "ssax r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe61cff5a @ ssax pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe61cff5a) " @ ssax pc, r12, r10")
TEST_RR( "ssub16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "ssub16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe61cff7a @ ssub16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe61cff7a) " @ ssub16 pc, r12, r10")
TEST_RR( "sadd8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "sadd8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe61cff9a @ sadd8 pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe61cff9a) " @ sadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe61000b0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe61fffbf) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe61000d0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe61fffdf) "") /* Unallocated space */
TEST_RR( "ssub8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "ssub8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe61cfffa @ ssub8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe61cfffa) " @ ssub8 pc, r12, r10")
TEST_RR( "qadd16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "qadd16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe62cff1a @ qadd16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe62cff1a) " @ qadd16 pc, r12, r10")
TEST_RR( "qasx r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "qasx r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe62cff3a @ qasx pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe62cff3a) " @ qasx pc, r12, r10")
TEST_RR( "qsax r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "qsax r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe62cff5a @ qsax pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe62cff5a) " @ qsax pc, r12, r10")
TEST_RR( "qsub16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "qsub16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe62cff7a @ qsub16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe62cff7a) " @ qsub16 pc, r12, r10")
TEST_RR( "qadd8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "qadd8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe62cff9a @ qadd8 pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe62cff9a) " @ qadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe62000b0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe62fffbf) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe62000d0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe62fffdf) "") /* Unallocated space */
TEST_RR( "qsub8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "qsub8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe62cfffa @ qsub8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe62cfffa) " @ qsub8 pc, r12, r10")
TEST_RR( "shadd16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "shadd16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe63cff1a @ shadd16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe63cff1a) " @ shadd16 pc, r12, r10")
TEST_RR( "shasx r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "shasx r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe63cff3a @ shasx pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe63cff3a) " @ shasx pc, r12, r10")
TEST_RR( "shsax r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "shsax r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe63cff5a @ shsax pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe63cff5a) " @ shsax pc, r12, r10")
TEST_RR( "shsub16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "shsub16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe63cff7a @ shsub16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe63cff7a) " @ shsub16 pc, r12, r10")
TEST_RR( "shadd8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "shadd8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe63cff9a @ shadd8 pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe63cff9a) " @ shadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe63000b0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe63fffbf) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe63000d0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe63fffdf) "") /* Unallocated space */
TEST_RR( "shsub8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "shsub8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe63cfffa @ shsub8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe63cfffa) " @ shsub8 pc, r12, r10")
TEST_GROUP("Parallel addition and subtraction, unsigned")
- TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe6400010) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe64fffff) "") /* Unallocated space */
TEST_RR( "uadd16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uadd16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe65cff1a @ uadd16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe65cff1a) " @ uadd16 pc, r12, r10")
TEST_RR( "uasx r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uasx r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe65cff3a @ uasx pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe65cff3a) " @ uasx pc, r12, r10")
TEST_RR( "usax r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "usax r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe65cff5a @ usax pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe65cff5a) " @ usax pc, r12, r10")
TEST_RR( "usub16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "usub16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe65cff7a @ usub16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe65cff7a) " @ usub16 pc, r12, r10")
TEST_RR( "uadd8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uadd8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe65cff9a @ uadd8 pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe65cff9a) " @ uadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe65000b0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe65fffbf) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe65000d0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe65fffdf) "") /* Unallocated space */
TEST_RR( "usub8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "usub8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe65cfffa @ usub8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe65cfffa) " @ usub8 pc, r12, r10")
TEST_RR( "uqadd16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uqadd16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe66cff1a @ uqadd16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe66cff1a) " @ uqadd16 pc, r12, r10")
TEST_RR( "uqasx r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uqasx r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe66cff3a @ uqasx pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe66cff3a) " @ uqasx pc, r12, r10")
TEST_RR( "uqsax r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uqsax r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe66cff5a @ uqsax pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe66cff5a) " @ uqsax pc, r12, r10")
TEST_RR( "uqsub16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uqsub16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe66cff7a @ uqsub16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe66cff7a) " @ uqsub16 pc, r12, r10")
TEST_RR( "uqadd8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uqadd8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe66cff9a @ uqadd8 pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe66cff9a) " @ uqadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe66000b0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe66fffbf) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe66000d0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe66fffdf) "") /* Unallocated space */
TEST_RR( "uqsub8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uqsub8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe66cfffa @ uqsub8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe66cfffa) " @ uqsub8 pc, r12, r10")
TEST_RR( "uhadd16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uhadd16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe67cff1a @ uhadd16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe67cff1a) " @ uhadd16 pc, r12, r10")
TEST_RR( "uhasx r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uhasx r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe67cff3a @ uhasx pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe67cff3a) " @ uhasx pc, r12, r10")
TEST_RR( "uhsax r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uhsax r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe67cff5a @ uhsax pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe67cff5a) " @ uhsax pc, r12, r10")
TEST_RR( "uhsub16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uhsub16 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe67cff7a @ uhsub16 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe67cff7a) " @ uhsub16 pc, r12, r10")
TEST_RR( "uhadd8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uhadd8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe67cff9a @ uhadd8 pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe67cff9a) " @ uhadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe67000b0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe67fffbf) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe67000d0) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe67fffdf) "") /* Unallocated space */
TEST_RR( "uhsub8 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uhsub8 r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe67cfffa @ uhsub8 pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe67feffa @ uhsub8 r14, pc, r10")
- TEST_UNSUPPORTED(".word 0xe67cefff @ uhsub8 r14, r12, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe67cfffa) " @ uhsub8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe67feffa) " @ uhsub8 r14, pc, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe67cefff) " @ uhsub8 r14, r12, pc")
#endif /* __LINUX_ARM_ARCH__ >= 7 */
#if __LINUX_ARM_ARCH__ >= 6
TEST_RR( "pkhbt r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
- TEST_UNSUPPORTED(".word 0xe68cf11a @ pkhbt pc, r12, r10, lsl #2")
+ TEST_UNSUPPORTED(__inst_arm(0xe68cf11a) " @ pkhbt pc, r12, r10, lsl #2")
TEST_RR( "pkhtb r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
- TEST_UNSUPPORTED(".word 0xe68cf15a @ pkhtb pc, r12, r10, asr #2")
- TEST_UNSUPPORTED(".word 0xe68fe15a @ pkhtb r14, pc, r10, asr #2")
- TEST_UNSUPPORTED(".word 0xe68ce15f @ pkhtb r14, r12, pc, asr #2")
- TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe68cf15a) " @ pkhtb pc, r12, r10, asr #2")
+ TEST_UNSUPPORTED(__inst_arm(0xe68fe15a) " @ pkhtb r14, pc, r10, asr #2")
+ TEST_UNSUPPORTED(__inst_arm(0xe68ce15f) " @ pkhtb r14, r12, pc, asr #2")
+ TEST_UNSUPPORTED(__inst_arm(0xe6900010) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe69fffdf) "") /* Unallocated space */
TEST_R( "ssat r0, #24, r",0, VAL1,"")
TEST_R( "ssat r14, #24, r",12, VAL2,"")
TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
- TEST_UNSUPPORTED(".word 0xe6b7f01c @ ssat pc, #24, r12")
+ TEST_UNSUPPORTED(__inst_arm(0xe6b7f01c) " @ ssat pc, #24, r12")
TEST_R( "usat r0, #24, r",0, VAL1,"")
TEST_R( "usat r14, #24, r",12, VAL2,"")
TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
- TEST_UNSUPPORTED(".word 0xe6f7f01c @ usat pc, #24, r12")
+ TEST_UNSUPPORTED(__inst_arm(0xe6f7f01c) " @ usat pc, #24, r12")
TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_R( "sxtb16 r8, r",7, HH1,"")
- TEST_UNSUPPORTED(".word 0xe68cf47a @ sxtab16 pc,r12, r10, ror #8")
+ TEST_UNSUPPORTED(__inst_arm(0xe68cf47a) " @ sxtab16 pc,r12, r10, ror #8")
TEST_RR( "sel r0, r",0, VAL1,", r",1, VAL2,"")
TEST_RR( "sel r14, r",12,VAL1,", r",10, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe68cffba @ sel pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe68fefba @ sel r14, pc, r10")
- TEST_UNSUPPORTED(".word 0xe68cefbf @ sel r14, r12, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe68cffba) " @ sel pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe68fefba) " @ sel r14, pc, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe68cefbf) " @ sel r14, r12, pc")
TEST_R( "ssat16 r0, #12, r",0, HH1,"")
TEST_R( "ssat16 r14, #12, r",12, HH2,"")
- TEST_UNSUPPORTED(".word 0xe6abff3c @ ssat16 pc, #12, r12")
+ TEST_UNSUPPORTED(__inst_arm(0xe6abff3c) " @ ssat16 pc, #12, r12")
TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_R( "sxtb r8, r",7, HH1,"")
- TEST_UNSUPPORTED(".word 0xe6acf47a @ sxtab pc,r12, r10, ror #8")
+ TEST_UNSUPPORTED(__inst_arm(0xe6acf47a) " @ sxtab pc,r12, r10, ror #8")
TEST_R( "rev r0, r",0, VAL1,"")
TEST_R( "rev r14, r",12, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe6bfff3c @ rev pc, r12")
+ TEST_UNSUPPORTED(__inst_arm(0xe6bfff3c) " @ rev pc, r12")
TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_R( "sxth r8, r",7, HH1,"")
- TEST_UNSUPPORTED(".word 0xe6bcf47a @ sxtah pc,r12, r10, ror #8")
+ TEST_UNSUPPORTED(__inst_arm(0xe6bcf47a) " @ sxtah pc,r12, r10, ror #8")
TEST_R( "rev16 r0, r",0, VAL1,"")
TEST_R( "rev16 r14, r",12, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe6bfffbc @ rev16 pc, r12")
+ TEST_UNSUPPORTED(__inst_arm(0xe6bfffbc) " @ rev16 pc, r12")
TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_R( "uxtb16 r8, r",7, HH1,"")
- TEST_UNSUPPORTED(".word 0xe6ccf47a @ uxtab16 pc,r12, r10, ror #8")
+ TEST_UNSUPPORTED(__inst_arm(0xe6ccf47a) " @ uxtab16 pc,r12, r10, ror #8")
TEST_R( "usat16 r0, #12, r",0, HH1,"")
TEST_R( "usat16 r14, #12, r",12, HH2,"")
- TEST_UNSUPPORTED(".word 0xe6ecff3c @ usat16 pc, #12, r12")
- TEST_UNSUPPORTED(".word 0xe6ecef3f @ usat16 r14, #12, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe6ecff3c) " @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(__inst_arm(0xe6ecef3f) " @ usat16 r14, #12, pc")
TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_R( "uxtb r8, r",7, HH1,"")
- TEST_UNSUPPORTED(".word 0xe6ecf47a @ uxtab pc,r12, r10, ror #8")
+ TEST_UNSUPPORTED(__inst_arm(0xe6ecf47a) " @ uxtab pc,r12, r10, ror #8")
#if __LINUX_ARM_ARCH__ >= 7
TEST_R( "rbit r0, r",0, VAL1,"")
TEST_R( "rbit r14, r",12, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe6ffff3c @ rbit pc, r12")
+ TEST_UNSUPPORTED(__inst_arm(0xe6ffff3c) " @ rbit pc, r12")
#endif
TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_R( "uxth r8, r",7, HH1,"")
- TEST_UNSUPPORTED(".word 0xe6fff077 @ uxth pc, r7")
- TEST_UNSUPPORTED(".word 0xe6ff807f @ uxth r8, pc")
- TEST_UNSUPPORTED(".word 0xe6fcf47a @ uxtah pc, r12, r10, ror #8")
- TEST_UNSUPPORTED(".word 0xe6fce47f @ uxtah r14, r12, pc, ror #8")
+ TEST_UNSUPPORTED(__inst_arm(0xe6fff077) " @ uxth pc, r7")
+ TEST_UNSUPPORTED(__inst_arm(0xe6ff807f) " @ uxth r8, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe6fcf47a) " @ uxtah pc, r12, r10, ror #8")
+ TEST_UNSUPPORTED(__inst_arm(0xe6fce47f) " @ uxtah r14, r12, pc, ror #8")
TEST_R( "revsh r0, r",0, VAL1,"")
TEST_R( "revsh r14, r",12, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe6ffff3c @ revsh pc, r12")
- TEST_UNSUPPORTED(".word 0xe6ffef3f @ revsh r14, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe6ffff3c) " @ revsh pc, r12")
+ TEST_UNSUPPORTED(__inst_arm(0xe6ffef3f) " @ revsh r14, pc")
- TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe6900070) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe69fff7f) "") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */
- TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe6d00070) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_arm(0xe6dfff7f) "") /* Unallocated space */
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#if __LINUX_ARM_ARCH__ >= 6
TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe70f8a1c @ smlad pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe70f8a1c) " @ smlad pc, r12, r10, r8")
TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe70f8a3c @ smladx pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe70f8a3c) " @ smladx pc, r12, r10, r8")
TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe70ffa1c @ smuad pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe70ffa1c) " @ smuad pc, r12, r10")
TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe70ffa3c @ smuadx pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe70ffa3c) " @ smuadx pc, r12, r10")
TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe70f8a5c @ smlsd pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe70f8a5c) " @ smlsd pc, r12, r10, r8")
TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe70f8a7c @ smlsdx pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe70f8a7c) " @ smlsdx pc, r12, r10, r8")
TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe70ffa5c @ smusd pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe70ffa5c) " @ smusd pc, r12, r10")
TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
- TEST_UNSUPPORTED(".word 0xe70ffa7c @ smusdx pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe70ffa7c) " @ smusdx pc, r12, r10")
TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
- TEST_UNSUPPORTED(".word 0xe74af819 @ smlald pc, r10, r9, r8")
- TEST_UNSUPPORTED(".word 0xe74fb819 @ smlald r11, pc, r9, r8")
- TEST_UNSUPPORTED(".word 0xe74ab81f @ smlald r11, r10, pc, r8")
- TEST_UNSUPPORTED(".word 0xe74abf19 @ smlald r11, r10, r9, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe74af819) " @ smlald pc, r10, r9, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe74fb819) " @ smlald r11, pc, r9, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe74ab81f) " @ smlald r11, r10, pc, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe74abf19) " @ smlald r11, r10, r9, pc")
TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
- TEST_UNSUPPORTED(".word 0xe74af839 @ smlaldx pc, r10, r9, r8")
- TEST_UNSUPPORTED(".word 0xe74fb839 @ smlaldx r11, pc, r9, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe74af839) " @ smlaldx pc, r10, r9, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe74fb839) " @ smlaldx r11, pc, r9, r8")
TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe75f8a1c @ smmla pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe75f8a1c) " @ smmla pc, r12, r10, r8")
TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe75f8a3c @ smmlar pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe75f8a3c) " @ smmlar pc, r12, r10, r8")
TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
- TEST_UNSUPPORTED(".word 0xe75ffa1c @ smmul pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe75ffa1c) " @ smmul pc, r12, r10")
TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
- TEST_UNSUPPORTED(".word 0xe75ffa3c @ smmulr pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe75ffa3c) " @ smmulr pc, r12, r10")
TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe75f8adc @ smmls pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe75f8adc) " @ smmls pc, r12, r10, r8")
TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
- TEST_UNSUPPORTED(".word 0xe75f8afc @ smmlsr pc, r12, r10, r8")
- TEST_UNSUPPORTED(".word 0xe75e8aff @ smmlsr r14, pc, r10, r8")
- TEST_UNSUPPORTED(".word 0xe75e8ffc @ smmlsr r14, r12, pc, r8")
- TEST_UNSUPPORTED(".word 0xe75efafc @ smmlsr r14, r12, r10, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe75f8afc) " @ smmlsr pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe75e8aff) " @ smmlsr r14, pc, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe75e8ffc) " @ smmlsr r14, r12, pc, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe75efafc) " @ smmlsr r14, r12, r10, pc")
TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
- TEST_UNSUPPORTED(".word 0xe75ffa1c @ usad8 pc, r12, r10")
- TEST_UNSUPPORTED(".word 0xe75efa1f @ usad8 r14, pc, r10")
- TEST_UNSUPPORTED(".word 0xe75eff1c @ usad8 r14, r12, pc")
+ TEST_UNSUPPORTED(__inst_arm(0xe75ffa1c) " @ usad8 pc, r12, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe75efa1f) " @ usad8 r14, pc, r10")
+ TEST_UNSUPPORTED(__inst_arm(0xe75eff1c) " @ usad8 r14, r12, pc")
TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
- TEST_UNSUPPORTED(".word 0xe78f8a1c @ usada8 pc, r12, r10, r8")
- TEST_UNSUPPORTED(".word 0xe78e8a1f @ usada8 r14, pc, r10, r8")
- TEST_UNSUPPORTED(".word 0xe78e8f1c @ usada8 r14, r12, pc, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe78f8a1c) " @ usada8 pc, r12, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe78e8a1f) " @ usada8 r14, pc, r10, r8")
+ TEST_UNSUPPORTED(__inst_arm(0xe78e8f1c) " @ usada8 r14, r12, pc, r8")
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#if __LINUX_ARM_ARCH__ >= 7
TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
TEST_R( "sbfxeq r14, r",12, VAL2,", #8, #16")
TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
- TEST_UNSUPPORTED(".word 0xe7aff45c @ sbfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(__inst_arm(0xe7aff45c) " @ sbfx pc, r12, #8, #16")
TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
TEST_R( "ubfxcs r14, r",12, VAL2,", #8, #16")
TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
- TEST_UNSUPPORTED(".word 0xe7eff45c @ ubfx pc, r12, #8, #16")
- TEST_UNSUPPORTED(".word 0xe7efc45f @ ubfx r12, pc, #8, #16")
+ TEST_UNSUPPORTED(__inst_arm(0xe7eff45c) " @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(__inst_arm(0xe7efc45f) " @ ubfx r12, pc, #8, #16")
TEST_R( "bfc r",0, VAL1,", #4, #20")
TEST_R( "bfcvs r",14,VAL2,", #4, #20")
TEST_R( "bfc r",7, VAL1,", #0, #31")
TEST_R( "bfc r",8, VAL2,", #0, #31")
- TEST_UNSUPPORTED(".word 0xe7def01f @ bfc pc, #0, #31");
+ TEST_UNSUPPORTED(__inst_arm(0xe7def01f) " @ bfc pc, #0, #31");
TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
TEST_RR( "bfipl r",12,VAL1,", r",14 , VAL2,", #4, #20")
- TEST_UNSUPPORTED(".word 0xe7d7f21e @ bfi pc, r14, #4, #20")
+ TEST_UNSUPPORTED(__inst_arm(0xe7d7f21e) " @ bfi pc, r14, #4, #20")
- TEST_UNSUPPORTED(".word 0x07f000f0") /* Permanently UNDEFINED */
- TEST_UNSUPPORTED(".word 0x07ffffff") /* Permanently UNDEFINED */
+ TEST_UNSUPPORTED(__inst_arm(0x07f000f0) "") /* Permanently UNDEFINED */
+ TEST_UNSUPPORTED(__inst_arm(0x07ffffff) "") /* Permanently UNDEFINED */
#endif /* __LINUX_ARM_ARCH__ >= 6 */
TEST_GROUP("Branch, branch with link, and block data transfer")
\
TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #4]") \
TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #-4]") \
- TEST_UNSUPPORTED(".word 0x"cc"daf0001 @ stc"two" 0, cr0, [r15, #4]!") \
- TEST_UNSUPPORTED(".word 0x"cc"d2f0001 @ stc"two" 0, cr0, [r15, #-4]!") \
- TEST_UNSUPPORTED(".word 0x"cc"caf0001 @ stc"two" 0, cr0, [r15], #4") \
- TEST_UNSUPPORTED(".word 0x"cc"c2f0001 @ stc"two" 0, cr0, [r15], #-4") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##daf0001) " @ stc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##d2f0001) " @ stc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##caf0001) " @ stc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##c2f0001) " @ stc"two" 0, cr0, [r15], #-4") \
TEST_COPROCESSOR( "stc"two" 0, cr0, [r15], {1}") \
TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #4]") \
TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #-4]") \
- TEST_UNSUPPORTED(".word 0x"cc"def0001 @ stc"two"l 0, cr0, [r15, #4]!") \
- TEST_UNSUPPORTED(".word 0x"cc"d6f0001 @ stc"two"l 0, cr0, [r15, #-4]!") \
- TEST_UNSUPPORTED(".word 0x"cc"cef0001 @ stc"two"l 0, cr0, [r15], #4") \
- TEST_UNSUPPORTED(".word 0x"cc"c6f0001 @ stc"two"l 0, cr0, [r15], #-4") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##def0001) " @ stc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##d6f0001) " @ stc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##cef0001) " @ stc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##c6f0001) " @ stc"two"l 0, cr0, [r15], #-4") \
TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15], {1}") \
TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #4]") \
TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #-4]") \
- TEST_UNSUPPORTED(".word 0x"cc"dbf0001 @ ldc"two" 0, cr0, [r15, #4]!") \
- TEST_UNSUPPORTED(".word 0x"cc"d3f0001 @ ldc"two" 0, cr0, [r15, #-4]!") \
- TEST_UNSUPPORTED(".word 0x"cc"cbf0001 @ ldc"two" 0, cr0, [r15], #4") \
- TEST_UNSUPPORTED(".word 0x"cc"c3f0001 @ ldc"two" 0, cr0, [r15], #-4") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##dbf0001) " @ ldc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##d3f0001) " @ ldc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##cbf0001) " @ ldc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##c3f0001) " @ ldc"two" 0, cr0, [r15], #-4") \
TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15], {1}") \
TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #4]") \
TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #-4]") \
- TEST_UNSUPPORTED(".word 0x"cc"dff0001 @ ldc"two"l 0, cr0, [r15, #4]!") \
- TEST_UNSUPPORTED(".word 0x"cc"d7f0001 @ ldc"two"l 0, cr0, [r15, #-4]!") \
- TEST_UNSUPPORTED(".word 0x"cc"cff0001 @ ldc"two"l 0, cr0, [r15], #4") \
- TEST_UNSUPPORTED(".word 0x"cc"c7f0001 @ ldc"two"l 0, cr0, [r15], #-4") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##dff0001) " @ ldc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##d7f0001) " @ ldc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##cff0001) " @ ldc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##c7f0001) " @ ldc"two"l 0, cr0, [r15], #-4") \
TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15], {1}")
#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc) \
\
TEST_COPROCESSOR( "mcrr"two" 0, 15, r0, r14, cr0") \
TEST_COPROCESSOR( "mcrr"two" 15, 0, r14, r0, cr15") \
- TEST_UNSUPPORTED(".word 0x"cc"c4f00f0 @ mcrr"two" 0, 15, r0, r15, cr0") \
- TEST_UNSUPPORTED(".word 0x"cc"c40ff0f @ mcrr"two" 15, 0, r15, r0, cr15") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##c4f00f0) " @ mcrr"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##c40ff0f) " @ mcrr"two" 15, 0, r15, r0, cr15") \
TEST_COPROCESSOR( "mrrc"two" 0, 15, r0, r14, cr0") \
TEST_COPROCESSOR( "mrrc"two" 15, 0, r14, r0, cr15") \
- TEST_UNSUPPORTED(".word 0x"cc"c5f00f0 @ mrrc"two" 0, 15, r0, r15, cr0") \
- TEST_UNSUPPORTED(".word 0x"cc"c50ff0f @ mrrc"two" 15, 0, r15, r0, cr15") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##c5f00f0) " @ mrrc"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(__inst_arm(0x##cc##c50ff0f) " @ mrrc"two" 15, 0, r15, r0, cr15") \
TEST_COPROCESSOR( "cdp"two" 15, 15, cr15, cr15, cr15, 7") \
TEST_COPROCESSOR( "cdp"two" 0, 0, cr0, cr0, cr0, 0") \
TEST_COPROCESSOR( "mcr"two" 15, 7, r15, cr15, cr15, 7") \
TEST_COPROCESSOR( "mrc"two" 15, 7, r15, cr15, cr15, 7") \
TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
- COPROCESSOR_INSTRUCTIONS_ST_LD("","e")
- COPROCESSOR_INSTRUCTIONS_MC_MR("","e")
+ COPROCESSOR_INSTRUCTIONS_ST_LD("",e)
+ COPROCESSOR_INSTRUCTIONS_MC_MR("",e)
TEST_UNSUPPORTED("svc 0")
TEST_UNSUPPORTED("svc 0xffffff")
TEST_UNSUPPORTED("rfedb sp!")
TEST_UNSUPPORTED("rfeia sp!")
TEST_UNSUPPORTED("rfeib sp!")
- TEST_UNSUPPORTED(".word 0xf81d0a00 @ rfeda pc")
- TEST_UNSUPPORTED(".word 0xf91d0a00 @ rfedb pc")
- TEST_UNSUPPORTED(".word 0xf89d0a00 @ rfeia pc")
- TEST_UNSUPPORTED(".word 0xf99d0a00 @ rfeib pc")
- TEST_UNSUPPORTED(".word 0xf83d0a00 @ rfeda pc!")
- TEST_UNSUPPORTED(".word 0xf93d0a00 @ rfedb pc!")
- TEST_UNSUPPORTED(".word 0xf8bd0a00 @ rfeia pc!")
- TEST_UNSUPPORTED(".word 0xf9bd0a00 @ rfeib pc!")
+ TEST_UNSUPPORTED(__inst_arm(0xf81d0a00) " @ rfeda pc")
+ TEST_UNSUPPORTED(__inst_arm(0xf91d0a00) " @ rfedb pc")
+ TEST_UNSUPPORTED(__inst_arm(0xf89d0a00) " @ rfeia pc")
+ TEST_UNSUPPORTED(__inst_arm(0xf99d0a00) " @ rfeib pc")
+ TEST_UNSUPPORTED(__inst_arm(0xf83d0a00) " @ rfeda pc!")
+ TEST_UNSUPPORTED(__inst_arm(0xf93d0a00) " @ rfedb pc!")
+ TEST_UNSUPPORTED(__inst_arm(0xf8bd0a00) " @ rfeia pc!")
+ TEST_UNSUPPORTED(__inst_arm(0xf9bd0a00) " @ rfeib pc!")
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#if __LINUX_ARM_ARCH__ >= 6
TEST( "blx __dummy_thumb_subroutine_odd")
#endif /* __LINUX_ARM_ARCH__ >= 6 */
- COPROCESSOR_INSTRUCTIONS_ST_LD("2","f")
+ COPROCESSOR_INSTRUCTIONS_ST_LD("2",f)
#if __LINUX_ARM_ARCH__ >= 6
- COPROCESSOR_INSTRUCTIONS_MC_MR("2","f")
+ COPROCESSOR_INSTRUCTIONS_MC_MR("2",f)
#endif
TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions")
#endif
#if __LINUX_ARM_ARCH__ >= 7
- TEST_SUPPORTED( ".word 0xf590f000 @ pldw [r0, #0]")
- TEST_SUPPORTED( ".word 0xf797f000 @ pldw [r7, r0]")
- TEST_SUPPORTED( ".word 0xf798f18c @ pldw [r8, r12, lsl #3]");
+ TEST_SUPPORTED( __inst_arm(0xf590f000) " @ pldw [r0, #0]")
+ TEST_SUPPORTED( __inst_arm(0xf797f000) " @ pldw [r7, r0]")
+ TEST_SUPPORTED( __inst_arm(0xf798f18c) " @ pldw [r8, r12, lsl #3]");
#endif
#if __LINUX_ARM_ARCH__ >= 7
#include <linux/kernel.h>
#include <linux/module.h>
+#include <asm/opcodes.h>
#include "kprobes-test.h"
TEST_R( "add sp" ", r",8,-8, "")
TEST_R( "add r",14,VAL1,", pc")
TEST_BF_R("add pc" ", r",0,2f-1f-8,"")
- TEST_UNSUPPORTED(".short 0x44ff @ add pc, pc")
+ TEST_UNSUPPORTED(__inst_thumb16(0x44ff) " @ add pc, pc")
TEST_RR( "cmp r",3,VAL1,", r",8,VAL2,"")
TEST_RR( "cmp r",8,VAL2,", r",0,VAL1,"")
TEST_BF_R("blx r",0, 2f+1,"")
TEST_BB_R("blx r",14,2f+1,"")
- TEST_UNSUPPORTED(".short 0x47f8 @ blx pc")
+ TEST_UNSUPPORTED(__inst_thumb16(0x47f8) " @ blx pc")
TEST_GROUP("Load from Literal Pool")
TEST_R("rev r7, r",0, VAL2,"")
TEST_R("rev16 r0, r",7, VAL1,"")
TEST_R("rev16 r7, r",0, VAL2,"")
- TEST_UNSUPPORTED(".short 0xba80")
- TEST_UNSUPPORTED(".short 0xbabf")
+ TEST_UNSUPPORTED(__inst_thumb16(0xba80) "")
+ TEST_UNSUPPORTED(__inst_thumb16(0xbabf) "")
TEST_R("revsh r0, r",7, VAL1,"")
TEST_R("revsh r7, r",0, VAL2,"")
TEST("nop")
TEST("wfi")
TEST_SUPPORTED("wfe")
- TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */
- TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */
+ TEST_UNSUPPORTED(__inst_thumb16(0xbf50) "") /* Unassigned hints */
+ TEST_UNSUPPORTED(__inst_thumb16(0xbff0) "") /* Unassigned hints */
#define TEST_IT(code, code2) \
TESTCASE_START(code) \
TEST_BF("bgt 2f")
TEST_BB("blt 2b")
)
- TEST_UNSUPPORTED(".short 0xde00")
- TEST_UNSUPPORTED(".short 0xdeff")
+ TEST_UNSUPPORTED(__inst_thumb16(0xde00) "")
+ TEST_UNSUPPORTED(__inst_thumb16(0xdeff) "")
TEST_UNSUPPORTED("svc #0x00")
TEST_UNSUPPORTED("svc #0xff")
TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",0,14*4,", {r12,pc}")
TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",13,2*4,", {r0-r12,pc}")
- TEST_UNSUPPORTED(".short 0xe88f,0x0101 @ stmia pc, {r0,r8}")
- TEST_UNSUPPORTED(".short 0xe92f,0x5f00 @ stmdb pc!, {r8-r12,r14}")
- TEST_UNSUPPORTED(".short 0xe8bd,0xc000 @ ldmia r13!, {r14,pc}")
- TEST_UNSUPPORTED(".short 0xe93e,0xc000 @ ldmdb r14!, {r14,pc}")
- TEST_UNSUPPORTED(".short 0xe8a7,0x3f00 @ stmia r7!, {r8-r12,sp}")
- TEST_UNSUPPORTED(".short 0xe8a7,0x9f00 @ stmia r7!, {r8-r12,pc}")
- TEST_UNSUPPORTED(".short 0xe93e,0x2010 @ ldmdb r14!, {r4,sp}")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe88f0101) " @ stmia pc, {r0,r8}")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe92f5f00) " @ stmdb pc!, {r8-r12,r14}")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe8bdc000) " @ ldmia r13!, {r14,pc}")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe93ec000) " @ ldmdb r14!, {r14,pc}")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe8a73f00) " @ stmia r7!, {r8-r12,sp}")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe8a79f00) " @ stmia r7!, {r8-r12,pc}")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe93e2010) " @ ldmdb r14!, {r4,sp}")
TEST_GROUP("Load/store double or exclusive, table branch")
"3: .word "__stringify(VAL1)" \n\t"
" .word "__stringify(VAL2))
- TEST_UNSUPPORTED(".short 0xe9ff,0xec04 @ ldrd r14, r12, [pc, #16]!")
- TEST_UNSUPPORTED(".short 0xe8ff,0xec04 @ ldrd r14, r12, [pc], #16")
- TEST_UNSUPPORTED(".short 0xe9d4,0xd800 @ ldrd sp, r8, [r4]")
- TEST_UNSUPPORTED(".short 0xe9d4,0xf800 @ ldrd pc, r8, [r4]")
- TEST_UNSUPPORTED(".short 0xe9d4,0x7d00 @ ldrd r7, sp, [r4]")
- TEST_UNSUPPORTED(".short 0xe9d4,0x7f00 @ ldrd r7, pc, [r4]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe9ffec04) " @ ldrd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe8ffec04) " @ ldrd r14, r12, [pc], #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe9d4d800) " @ ldrd sp, r8, [r4]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe9d4f800) " @ ldrd pc, r8, [r4]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe9d47d00) " @ ldrd r7, sp, [r4]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe9d47f00) " @ ldrd r7, pc, [r4]")
TEST_RRP("strd r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]")
TEST_RR( "strd r",12,VAL2,", r",14,VAL1,", [sp, #16]")
TEST_RR( "strd r",14,VAL2,", r",12,VAL1,", [sp, #16]!")
TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16")
TEST_RR( "strd r",7, VAL2,", r",8, VAL1,", [sp], #-16")
- TEST_UNSUPPORTED(".short 0xe9ef,0xec04 @ strd r14, r12, [pc, #16]!")
- TEST_UNSUPPORTED(".short 0xe8ef,0xec04 @ strd r14, r12, [pc], #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe9efec04) " @ strd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe8efec04) " @ strd r14, r12, [pc], #16")
TEST_RX("tbb [pc, r",0, (9f-(1f+4)),"]",
"9: \n\t"
"3: mvn r0, r0 \n\t"
"2: nop \n\t")
- TEST_UNSUPPORTED(".short 0xe8d1,0xf01f @ tbh [r1, pc]")
- TEST_UNSUPPORTED(".short 0xe8d1,0xf01d @ tbh [r1, sp]")
- TEST_UNSUPPORTED(".short 0xe8dd,0xf012 @ tbh [sp, r2]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe8d1f01f) " @ tbh [r1, pc]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe8d1f01d) " @ tbh [r1, sp]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xe8ddf012) " @ tbh [sp, r2]")
TEST_UNSUPPORTED("strexb r0, r1, [r2]")
TEST_UNSUPPORTED("strexh r0, r1, [r2]")
TEST_RR("pkhtb r0, r",0, HH1,", r",1, HH2,"")
TEST_RR("pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
- TEST_UNSUPPORTED(".short 0xea17,0x0f0d @ tst.w r7, sp")
- TEST_UNSUPPORTED(".short 0xea17,0x0f0f @ tst.w r7, pc")
- TEST_UNSUPPORTED(".short 0xea1d,0x0f07 @ tst.w sp, r7")
- TEST_UNSUPPORTED(".short 0xea1f,0x0f07 @ tst.w pc, r7")
- TEST_UNSUPPORTED(".short 0xf01d,0x1f08 @ tst sp, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf01f,0x1f08 @ tst pc, #0x00080008")
-
- TEST_UNSUPPORTED(".short 0xea97,0x0f0d @ teq.w r7, sp")
- TEST_UNSUPPORTED(".short 0xea97,0x0f0f @ teq.w r7, pc")
- TEST_UNSUPPORTED(".short 0xea9d,0x0f07 @ teq.w sp, r7")
- TEST_UNSUPPORTED(".short 0xea9f,0x0f07 @ teq.w pc, r7")
- TEST_UNSUPPORTED(".short 0xf09d,0x1f08 @ tst sp, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf09f,0x1f08 @ tst pc, #0x00080008")
-
- TEST_UNSUPPORTED(".short 0xeb17,0x0f0d @ cmn.w r7, sp")
- TEST_UNSUPPORTED(".short 0xeb17,0x0f0f @ cmn.w r7, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea170f0d) " @ tst.w r7, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea170f0f) " @ tst.w r7, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea1d0f07) " @ tst.w sp, r7")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea1f0f07) " @ tst.w pc, r7")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf01d1f08) " @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf01f1f08) " @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(__inst_thumb32(0xea970f0d) " @ teq.w r7, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea970f0f) " @ teq.w r7, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea9d0f07) " @ teq.w sp, r7")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea9f0f07) " @ teq.w pc, r7")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf09d1f08) " @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf09f1f08) " @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb170f0d) " @ cmn.w r7, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb170f0f) " @ cmn.w r7, pc")
TEST_P("cmn.w sp, r",7,0,"")
- TEST_UNSUPPORTED(".short 0xeb1f,0x0f07 @ cmn.w pc, r7")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb1f0f07) " @ cmn.w pc, r7")
TEST( "cmn sp, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf11f,0x1f08 @ cmn pc, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf11f1f08) " @ cmn pc, #0x00080008")
- TEST_UNSUPPORTED(".short 0xebb7,0x0f0d @ cmp.w r7, sp")
- TEST_UNSUPPORTED(".short 0xebb7,0x0f0f @ cmp.w r7, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xebb70f0d) " @ cmp.w r7, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xebb70f0f) " @ cmp.w r7, pc")
TEST_P("cmp.w sp, r",7,0,"")
- TEST_UNSUPPORTED(".short 0xebbf,0x0f07 @ cmp.w pc, r7")
+ TEST_UNSUPPORTED(__inst_thumb32(0xebbf0f07) " @ cmp.w pc, r7")
TEST( "cmp sp, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf1bf,0x1f08 @ cmp pc, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf1bf1f08) " @ cmp pc, #0x00080008")
- TEST_UNSUPPORTED(".short 0xea5f,0x070d @ movs.w r7, sp")
- TEST_UNSUPPORTED(".short 0xea5f,0x070f @ movs.w r7, pc")
- TEST_UNSUPPORTED(".short 0xea5f,0x0d07 @ movs.w sp, r7")
- TEST_UNSUPPORTED(".short 0xea4f,0x0f07 @ mov.w pc, r7")
- TEST_UNSUPPORTED(".short 0xf04f,0x1d08 @ mov sp, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf04f,0x1f08 @ mov pc, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea5f070d) " @ movs.w r7, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea5f070f) " @ movs.w r7, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea5f0d07) " @ movs.w sp, r7")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea4f0f07) " @ mov.w pc, r7")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf04f1d08) " @ mov sp, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf04f1f08) " @ mov pc, #0x00080008")
TEST_R("add.w r0, sp, r",1, 4,"")
TEST_R("adds r0, sp, r",1, 4,", asl #3")
TEST_R("add r0, sp, r",1, 16,", ror #1")
TEST_R("add.w sp, sp, r",1, 4,"")
TEST_R("add sp, sp, r",1, 4,", asl #3")
- TEST_UNSUPPORTED(".short 0xeb0d,0x1d01 @ add sp, sp, r1, asl #4")
- TEST_UNSUPPORTED(".short 0xeb0d,0x0d71 @ add sp, sp, r1, ror #1")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb0d1d01) " @ add sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb0d0d71) " @ add sp, sp, r1, ror #1")
TEST( "add.w r0, sp, #24")
TEST( "add.w sp, sp, #24")
- TEST_UNSUPPORTED(".short 0xeb0d,0x0f01 @ add pc, sp, r1")
- TEST_UNSUPPORTED(".short 0xeb0d,0x000f @ add r0, sp, pc")
- TEST_UNSUPPORTED(".short 0xeb0d,0x000d @ add r0, sp, sp")
- TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f @ add sp, sp, pc")
- TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d @ add sp, sp, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb0d0f01) " @ add pc, sp, r1")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb0d000f) " @ add r0, sp, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb0d000d) " @ add r0, sp, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb0d0d0f) " @ add sp, sp, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb0d0d0d) " @ add sp, sp, sp")
TEST_R("sub.w r0, sp, r",1, 4,"")
TEST_R("subs r0, sp, r",1, 4,", asl #3")
TEST_R("sub r0, sp, r",1, 16,", ror #1")
TEST_R("sub.w sp, sp, r",1, 4,"")
TEST_R("sub sp, sp, r",1, 4,", asl #3")
- TEST_UNSUPPORTED(".short 0xebad,0x1d01 @ sub sp, sp, r1, asl #4")
- TEST_UNSUPPORTED(".short 0xebad,0x0d71 @ sub sp, sp, r1, ror #1")
- TEST_UNSUPPORTED(".short 0xebad,0x0f01 @ sub pc, sp, r1")
+ TEST_UNSUPPORTED(__inst_thumb32(0xebad1d01) " @ sub sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(__inst_thumb32(0xebad0d71) " @ sub sp, sp, r1, ror #1")
+ TEST_UNSUPPORTED(__inst_thumb32(0xebad0f01) " @ sub pc, sp, r1")
TEST( "sub.w r0, sp, #24")
TEST( "sub.w sp, sp, #24")
- TEST_UNSUPPORTED(".short 0xea02,0x010f @ and r1, r2, pc")
- TEST_UNSUPPORTED(".short 0xea0f,0x0103 @ and r1, pc, r3")
- TEST_UNSUPPORTED(".short 0xea02,0x0f03 @ and pc, r2, r3")
- TEST_UNSUPPORTED(".short 0xea02,0x010d @ and r1, r2, sp")
- TEST_UNSUPPORTED(".short 0xea0d,0x0103 @ and r1, sp, r3")
- TEST_UNSUPPORTED(".short 0xea02,0x0d03 @ and sp, r2, r3")
- TEST_UNSUPPORTED(".short 0xf00d,0x1108 @ and r1, sp, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf00f,0x1108 @ and r1, pc, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf002,0x1d08 @ and sp, r8, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf002,0x1f08 @ and pc, r8, #0x00080008")
-
- TEST_UNSUPPORTED(".short 0xeb02,0x010f @ add r1, r2, pc")
- TEST_UNSUPPORTED(".short 0xeb0f,0x0103 @ add r1, pc, r3")
- TEST_UNSUPPORTED(".short 0xeb02,0x0f03 @ add pc, r2, r3")
- TEST_UNSUPPORTED(".short 0xeb02,0x010d @ add r1, r2, sp")
- TEST_SUPPORTED( ".short 0xeb0d,0x0103 @ add r1, sp, r3")
- TEST_UNSUPPORTED(".short 0xeb02,0x0d03 @ add sp, r2, r3")
- TEST_SUPPORTED( ".short 0xf10d,0x1108 @ add r1, sp, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf10d,0x1f08 @ add pc, sp, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf10f,0x1108 @ add r1, pc, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf102,0x1d08 @ add sp, r8, #0x00080008")
- TEST_UNSUPPORTED(".short 0xf102,0x1f08 @ add pc, r8, #0x00080008")
-
- TEST_UNSUPPORTED(".short 0xeaa0,0x0000")
- TEST_UNSUPPORTED(".short 0xeaf0,0x0000")
- TEST_UNSUPPORTED(".short 0xeb20,0x0000")
- TEST_UNSUPPORTED(".short 0xeb80,0x0000")
- TEST_UNSUPPORTED(".short 0xebe0,0x0000")
-
- TEST_UNSUPPORTED(".short 0xf0a0,0x0000")
- TEST_UNSUPPORTED(".short 0xf0c0,0x0000")
- TEST_UNSUPPORTED(".short 0xf0f0,0x0000")
- TEST_UNSUPPORTED(".short 0xf120,0x0000")
- TEST_UNSUPPORTED(".short 0xf180,0x0000")
- TEST_UNSUPPORTED(".short 0xf1e0,0x0000")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea02010f) " @ and r1, r2, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea0f0103) " @ and r1, pc, r3")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea020f03) " @ and pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea02010d) " @ and r1, r2, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea0d0103) " @ and r1, sp, r3")
+ TEST_UNSUPPORTED(__inst_thumb32(0xea020d03) " @ and sp, r2, r3")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf00d1108) " @ and r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf00f1108) " @ and r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf0021d08) " @ and sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf0021f08) " @ and pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb02010f) " @ add r1, r2, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb0f0103) " @ add r1, pc, r3")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb020f03) " @ add pc, r2, r3")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb02010d) " @ add r1, r2, sp")
+ TEST_SUPPORTED( __inst_thumb32(0xeb0d0103) " @ add r1, sp, r3")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb020d03) " @ add sp, r2, r3")
+ TEST_SUPPORTED( __inst_thumb32(0xf10d1108) " @ add r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf10d1f08) " @ add pc, sp, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf10f1108) " @ add r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf1021d08) " @ add sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf1021f08) " @ add pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(__inst_thumb32(0xeaa00000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeaf00000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb200000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeb800000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xebe00000) "")
+
+ TEST_UNSUPPORTED(__inst_thumb32(0xf0a00000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf0c00000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf0f00000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf1200000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf1800000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf1e00000) "")
TEST_GROUP("Coprocessor instructions")
- TEST_UNSUPPORTED(".short 0xec00,0x0000")
- TEST_UNSUPPORTED(".short 0xeff0,0x0000")
- TEST_UNSUPPORTED(".short 0xfc00,0x0000")
- TEST_UNSUPPORTED(".short 0xfff0,0x0000")
+ TEST_UNSUPPORTED(__inst_thumb32(0xec000000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xeff00000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfc000000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfff00000) "")
TEST_GROUP("Data-processing (plain binary immediate)")
TEST( "addw r14, sp, #0xf5a")
TEST( "addw sp, sp, #0x20")
TEST( "addw r7, pc, #0x888")
- TEST_UNSUPPORTED(".short 0xf20f,0x1f20 @ addw pc, pc, #0x120")
- TEST_UNSUPPORTED(".short 0xf20d,0x1f20 @ addw pc, sp, #0x120")
- TEST_UNSUPPORTED(".short 0xf20f,0x1d20 @ addw sp, pc, #0x120")
- TEST_UNSUPPORTED(".short 0xf200,0x1d20 @ addw sp, r0, #0x120")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf20f1f20) " @ addw pc, pc, #0x120")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf20d1f20) " @ addw pc, sp, #0x120")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf20f1d20) " @ addw sp, pc, #0x120")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2001d20) " @ addw sp, r0, #0x120")
TEST_R("subw r0, r",1, VAL1,", #0x123")
TEST( "subw r14, sp, #0xf5a")
TEST( "subw sp, sp, #0x20")
TEST( "subw r7, pc, #0x888")
- TEST_UNSUPPORTED(".short 0xf2af,0x1f20 @ subw pc, pc, #0x120")
- TEST_UNSUPPORTED(".short 0xf2ad,0x1f20 @ subw pc, sp, #0x120")
- TEST_UNSUPPORTED(".short 0xf2af,0x1d20 @ subw sp, pc, #0x120")
- TEST_UNSUPPORTED(".short 0xf2a0,0x1d20 @ subw sp, r0, #0x120")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2af1f20) " @ subw pc, pc, #0x120")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2ad1f20) " @ subw pc, sp, #0x120")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2af1d20) " @ subw sp, pc, #0x120")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2a01d20) " @ subw sp, r0, #0x120")
TEST("movw r0, #0")
TEST("movw r0, #0xffff")
TEST("movw lr, #0xffff")
- TEST_UNSUPPORTED(".short 0xf240,0x0d00 @ movw sp, #0")
- TEST_UNSUPPORTED(".short 0xf240,0x0f00 @ movw pc, #0")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2400d00) " @ movw sp, #0")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2400f00) " @ movw pc, #0")
TEST_R("movt r",0, VAL1,", #0")
TEST_R("movt r",0, VAL2,", #0xffff")
TEST_R("movt r",14,VAL1,", #0xffff")
- TEST_UNSUPPORTED(".short 0xf2c0,0x0d00 @ movt sp, #0")
- TEST_UNSUPPORTED(".short 0xf2c0,0x0f00 @ movt pc, #0")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2c00d00) " @ movt sp, #0")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf2c00f00) " @ movt pc, #0")
TEST_R( "ssat r0, #24, r",0, VAL1,"")
TEST_R( "ssat r14, #24, r",12, VAL2,"")
TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
- TEST_UNSUPPORTED(".short 0xf30c,0x0d17 @ ssat sp, #24, r12")
- TEST_UNSUPPORTED(".short 0xf30c,0x0f17 @ ssat pc, #24, r12")
- TEST_UNSUPPORTED(".short 0xf30d,0x0c17 @ ssat r12, #24, sp")
- TEST_UNSUPPORTED(".short 0xf30f,0x0c17 @ ssat r12, #24, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf30c0d17) " @ ssat sp, #24, r12")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf30c0f17) " @ ssat pc, #24, r12")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf30d0c17) " @ ssat r12, #24, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf30f0c17) " @ ssat r12, #24, pc")
TEST_R( "usat r0, #24, r",0, VAL1,"")
TEST_R( "usat r14, #24, r",12, VAL2,"")
TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
- TEST_UNSUPPORTED(".short 0xf38c,0x0d17 @ usat sp, #24, r12")
- TEST_UNSUPPORTED(".short 0xf38c,0x0f17 @ usat pc, #24, r12")
- TEST_UNSUPPORTED(".short 0xf38d,0x0c17 @ usat r12, #24, sp")
- TEST_UNSUPPORTED(".short 0xf38f,0x0c17 @ usat r12, #24, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf38c0d17) " @ usat sp, #24, r12")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf38c0f17) " @ usat pc, #24, r12")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf38d0c17) " @ usat r12, #24, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf38f0c17) " @ usat r12, #24, pc")
TEST_R( "ssat16 r0, #12, r",0, HH1,"")
TEST_R( "ssat16 r14, #12, r",12, HH2,"")
- TEST_UNSUPPORTED(".short 0xf32c,0x0d0b @ ssat16 sp, #12, r12")
- TEST_UNSUPPORTED(".short 0xf32c,0x0f0b @ ssat16 pc, #12, r12")
- TEST_UNSUPPORTED(".short 0xf32d,0x0c0b @ ssat16 r12, #12, sp")
- TEST_UNSUPPORTED(".short 0xf32f,0x0c0b @ ssat16 r12, #12, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf32c0d0b) " @ ssat16 sp, #12, r12")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf32c0f0b) " @ ssat16 pc, #12, r12")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf32d0c0b) " @ ssat16 r12, #12, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf32f0c0b) " @ ssat16 r12, #12, pc")
TEST_R( "usat16 r0, #12, r",0, HH1,"")
TEST_R( "usat16 r14, #12, r",12, HH2,"")
- TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b @ usat16 sp, #12, r12")
- TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b @ usat16 pc, #12, r12")
- TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b @ usat16 r12, #12, sp")
- TEST_UNSUPPORTED(".short 0xf3af,0x0c0b @ usat16 r12, #12, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3ac0d0b) " @ usat16 sp, #12, r12")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3ac0f0b) " @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3ad0c0b) " @ usat16 r12, #12, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3af0c0b) " @ usat16 r12, #12, pc")
TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
TEST_R( "sbfx r14, r",12, VAL2,", #8, #16")
TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
- TEST_UNSUPPORTED(".short 0xf34c,0x2d0f @ sbfx sp, r12, #8, #16")
- TEST_UNSUPPORTED(".short 0xf34c,0x2f0f @ sbfx pc, r12, #8, #16")
- TEST_UNSUPPORTED(".short 0xf34d,0x2c0f @ sbfx r12, sp, #8, #16")
- TEST_UNSUPPORTED(".short 0xf34f,0x2c0f @ sbfx r12, pc, #8, #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf34c2d0f) " @ sbfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf34c2f0f) " @ sbfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf34d2c0f) " @ sbfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf34f2c0f) " @ sbfx r12, pc, #8, #16")
TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
TEST_R( "ubfx r14, r",12, VAL2,", #8, #16")
TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
- TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f @ ubfx sp, r12, #8, #16")
- TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f @ ubfx pc, r12, #8, #16")
- TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f @ ubfx r12, sp, #8, #16")
- TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f @ ubfx r12, pc, #8, #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3cc2d0f) " @ ubfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3cc2f0f) " @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3cd2c0f) " @ ubfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3cf2c0f) " @ ubfx r12, pc, #8, #16")
TEST_R( "bfc r",0, VAL1,", #4, #20")
TEST_R( "bfc r",14,VAL2,", #4, #20")
TEST_R( "bfc r",7, VAL1,", #0, #31")
TEST_R( "bfc r",8, VAL2,", #0, #31")
- TEST_UNSUPPORTED(".short 0xf36f,0x0d1e @ bfc sp, #0, #31")
- TEST_UNSUPPORTED(".short 0xf36f,0x0f1e @ bfc pc, #0, #31")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf36f0d1e) " @ bfc sp, #0, #31")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf36f0f1e) " @ bfc pc, #0, #31")
TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
TEST_RR( "bfi r",12,VAL1,", r",14 , VAL2,", #4, #20")
- TEST_UNSUPPORTED(".short 0xf36e,0x1d17 @ bfi sp, r14, #4, #20")
- TEST_UNSUPPORTED(".short 0xf36e,0x1f17 @ bfi pc, r14, #4, #20")
- TEST_UNSUPPORTED(".short 0xf36d,0x1e17 @ bfi r14, sp, #4, #20")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf36e1d17) " @ bfi sp, r14, #4, #20")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf36e1f17) " @ bfi pc, r14, #4, #20")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf36d1e17) " @ bfi r14, sp, #4, #20")
TEST_GROUP("Branches and miscellaneous control")
TEST("mrs r0, cpsr")
TEST("mrs r14, cpsr")
- TEST_UNSUPPORTED(".short 0xf3ef,0x8d00 @ mrs sp, spsr")
- TEST_UNSUPPORTED(".short 0xf3ef,0x8f00 @ mrs pc, spsr")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3ef8d00) " @ mrs sp, spsr")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf3ef8f00) " @ mrs pc, spsr")
TEST_UNSUPPORTED("mrs r0, spsr")
TEST_UNSUPPORTED("mrs lr, spsr")
- TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf7f08000) " @ smc #0")
- TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf7f0a000) " @ undefeined")
TEST_BF( "b.w 2f")
TEST_BB( "b.w 2b")
SINGLE_STORE("")
TEST("str sp, [sp]")
- TEST_UNSUPPORTED(".short 0xf8cf,0xe000 @ str r14, [pc]")
- TEST_UNSUPPORTED(".short 0xf8ce,0xf000 @ str pc, [r14]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf8cfe000) " @ str r14, [pc]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf8cef000) " @ str pc, [r14]")
TEST_GROUP("Advanced SIMD element or structure load/store instructions")
- TEST_UNSUPPORTED(".short 0xf900,0x0000")
- TEST_UNSUPPORTED(".short 0xf92f,0xffff")
- TEST_UNSUPPORTED(".short 0xf980,0x0000")
- TEST_UNSUPPORTED(".short 0xf9ef,0xffff")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf9000000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf92fffff) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf9800000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf9efffff) "")
TEST_GROUP("Load single data item and memory hints")
TEST_SUPPORTED("ldr sp, 99f")
TEST_SUPPORTED("ldr pc, 99f")
- TEST_UNSUPPORTED(".short 0xf854,0x700d @ ldr r7, [r4, sp]")
- TEST_UNSUPPORTED(".short 0xf854,0x700f @ ldr r7, [r4, pc]")
- TEST_UNSUPPORTED(".short 0xf814,0x700d @ ldrb r7, [r4, sp]")
- TEST_UNSUPPORTED(".short 0xf814,0x700f @ ldrb r7, [r4, pc]")
- TEST_UNSUPPORTED(".short 0xf89f,0xd004 @ ldrb sp, 99f")
- TEST_UNSUPPORTED(".short 0xf814,0xd008 @ ldrb sp, [r4, r8]")
- TEST_UNSUPPORTED(".short 0xf894,0xd000 @ ldrb sp, [r4]")
-
- TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xf854700d) " @ ldr r7, [r4, sp]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf854700f) " @ ldr r7, [r4, pc]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf814700d) " @ ldrb r7, [r4, sp]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf814700f) " @ ldrb r7, [r4, pc]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf89fd004) " @ ldrb sp, 99f")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf814d008) " @ ldrb sp, [r4, r8]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf894d000) " @ ldrb sp, [r4]")
+
+ TEST_UNSUPPORTED(__inst_thumb32(0xf8600000) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xf9ffffff) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xf9500000) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xf95fffff) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xf8000800) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xf97ffaff) "") /* Unallocated space */
TEST( "pli [pc, #4]")
TEST( "pli [pc, #-4]")
TEST( "pld [pc, #-4]")
TEST_P( "pld [r",0,-1024,", #1024]")
- TEST( ".short 0xf8b0,0xf400 @ pldw [r0, #1024]")
+ TEST( __inst_thumb32(0xf8b0f400) " @ pldw [r0, #1024]")
TEST_P( "pli [r",4, 0b,", #1024]")
TEST_P( "pld [r",7, 120,", #-120]")
- TEST( ".short 0xf837,0xfc78 @ pldw [r7, #-120]")
+ TEST( __inst_thumb32(0xf837fc78) " @ pldw [r7, #-120]")
TEST_P( "pli [r",11,120,", #-120]")
TEST( "pld [sp, #0]")
TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
TEST_PR("pld [r",8, 24, ", r",12,16,", lsl #3]")
- TEST_SUPPORTED(".short 0xf837,0xf000 @ pldw [r7, r0]")
- TEST_SUPPORTED(".short 0xf838,0xf03c @ pldw [r8, r12, lsl #3]");
+ TEST_SUPPORTED(__inst_thumb32(0xf837f000) " @ pldw [r7, r0]")
+ TEST_SUPPORTED(__inst_thumb32(0xf838f03c) " @ pldw [r8, r12, lsl #3]");
TEST_RR("pli [r",12,0b,", r",0, 16,"]")
TEST_RR("pli [r",0, 0b,", r",12,16,", lsl #3]")
TEST_R( "pld [sp, r",1, 16,"]")
- TEST_UNSUPPORTED(".short 0xf817,0xf00d @pld [r7, sp]")
- TEST_UNSUPPORTED(".short 0xf817,0xf00f @pld [r7, pc]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf817f00d) " @pld [r7, sp]")
+ TEST_UNSUPPORTED(__inst_thumb32(0xf817f00f) " @pld [r7, pc]")
TEST_GROUP("Data-processing (register)")
SHIFTS32("ror")
SHIFTS32("rors")
- TEST_UNSUPPORTED(".short 0xfa01,0xff02 @ lsl pc, r1, r2")
- TEST_UNSUPPORTED(".short 0xfa01,0xfd02 @ lsl sp, r1, r2")
- TEST_UNSUPPORTED(".short 0xfa0f,0xf002 @ lsl r0, pc, r2")
- TEST_UNSUPPORTED(".short 0xfa0d,0xf002 @ lsl r0, sp, r2")
- TEST_UNSUPPORTED(".short 0xfa01,0xf00f @ lsl r0, r1, pc")
- TEST_UNSUPPORTED(".short 0xfa01,0xf00d @ lsl r0, r1, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa01ff02) " @ lsl pc, r1, r2")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa01fd02) " @ lsl sp, r1, r2")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa0ff002) " @ lsl r0, pc, r2")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa0df002) " @ lsl r0, sp, r2")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa01f00f) " @ lsl r0, r1, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa01f00d) " @ lsl r0, r1, sp")
TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_R( "sxth r8, r",7, HH1,"")
- TEST_UNSUPPORTED(".short 0xfa0f,0xff87 @ sxth pc, r7");
- TEST_UNSUPPORTED(".short 0xfa0f,0xfd87 @ sxth sp, r7");
- TEST_UNSUPPORTED(".short 0xfa0f,0xf88f @ sxth r8, pc");
- TEST_UNSUPPORTED(".short 0xfa0f,0xf88d @ sxth r8, sp");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa0fff87) " @ sxth pc, r7");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa0ffd87) " @ sxth sp, r7");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa0ff88f) " @ sxth r8, pc");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa0ff88d) " @ sxth r8, sp");
TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
TEST_R( "uxtb r8, r",7, HH1,"")
- TEST_UNSUPPORTED(".short 0xfa60,0x00f0")
- TEST_UNSUPPORTED(".short 0xfa7f,0xffff")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa6000f0) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa7fffff) "")
#define PARALLEL_ADD_SUB(op) \
TEST_RR( op"add16 r0, r",0, HH1,", r",1, HH2,"") \
TEST_R("revsh.w r0, r",0, VAL1,"")
TEST_R("revsh r14, r",12, VAL2,"")
- TEST_UNSUPPORTED(".short 0xfa9c,0xff8c @ rev pc, r12");
- TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c @ rev sp, r12");
- TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f @ rev r14, pc");
- TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d @ rev r14, sp");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa9cff8c) " @ rev pc, r12");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa9cfd8c) " @ rev sp, r12");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa9ffe8f) " @ rev r14, pc");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa9dfe8d) " @ rev r14, sp");
TEST_RR("sel r0, r",0, VAL1,", r",1, VAL2,"")
TEST_RR("sel r14, r",12,VAL1,", r",10, VAL2,"")
TEST_R("clz r7, r",14,0x1,"")
TEST_R("clz lr, r",7, 0xffffffff,"")
- TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfa80f030) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfaffff7f) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfab0f000) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfaffff7f) "") /* Unallocated space */
TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations")
TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
TEST_RR( "mul r7, r",8, VAL2,", r",9, VAL2,"")
- TEST_UNSUPPORTED(".short 0xfb08,0xff09 @ mul pc, r8, r9")
- TEST_UNSUPPORTED(".short 0xfb08,0xfd09 @ mul sp, r8, r9")
- TEST_UNSUPPORTED(".short 0xfb0f,0xf709 @ mul r7, pc, r9")
- TEST_UNSUPPORTED(".short 0xfb0d,0xf709 @ mul r7, sp, r9")
- TEST_UNSUPPORTED(".short 0xfb08,0xf70f @ mul r7, r8, pc")
- TEST_UNSUPPORTED(".short 0xfb08,0xf70d @ mul r7, r8, sp")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08ff09) " @ mul pc, r8, r9")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08fd09) " @ mul sp, r8, r9")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb0ff709) " @ mul r7, pc, r9")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb0df709) " @ mul r7, sp, r9")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08f70f) " @ mul r7, r8, pc")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08f70d) " @ mul r7, r8, sp")
TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "mla r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
- TEST_UNSUPPORTED(".short 0xfb08,0xaf09 @ mla pc, r8, r9, r10");
- TEST_UNSUPPORTED(".short 0xfb08,0xad09 @ mla sp, r8, r9, r10");
- TEST_UNSUPPORTED(".short 0xfb0f,0xa709 @ mla r7, pc, r9, r10");
- TEST_UNSUPPORTED(".short 0xfb0d,0xa709 @ mla r7, sp, r9, r10");
- TEST_UNSUPPORTED(".short 0xfb08,0xa70f @ mla r7, r8, pc, r10");
- TEST_UNSUPPORTED(".short 0xfb08,0xa70d @ mla r7, r8, sp, r10");
- TEST_UNSUPPORTED(".short 0xfb08,0xd709 @ mla r7, r8, r9, sp");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08af09) " @ mla pc, r8, r9, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08ad09) " @ mla sp, r8, r9, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb0fa709) " @ mla r7, pc, r9, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb0da709) " @ mla r7, sp, r9, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08a70f) " @ mla r7, r8, pc, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08a70d) " @ mla r7, r8, sp, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb08d709) " @ mla r7, r8, r9, sp");
TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
TEST_RRR( "mls r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
- TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */
- TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb00f010) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb0fff1f) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb70f010) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb7fff1f) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb700010) "") /* Unallocated space */
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb7fff1f) "") /* Unallocated space */
TEST_GROUP("Long multiply, long multiply accumulate, and divide")
TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
TEST_RR( "smull r7, r8, r",9, VAL2,", r",10, VAL1,"")
- TEST_UNSUPPORTED(".short 0xfb89,0xf80a @ smull pc, r8, r9, r10");
- TEST_UNSUPPORTED(".short 0xfb89,0xd80a @ smull sp, r8, r9, r10");
- TEST_UNSUPPORTED(".short 0xfb89,0x7f0a @ smull r7, pc, r9, r10");
- TEST_UNSUPPORTED(".short 0xfb89,0x7d0a @ smull r7, sp, r9, r10");
- TEST_UNSUPPORTED(".short 0xfb8f,0x780a @ smull r7, r8, pc, r10");
- TEST_UNSUPPORTED(".short 0xfb8d,0x780a @ smull r7, r8, sp, r10");
- TEST_UNSUPPORTED(".short 0xfb89,0x780f @ smull r7, r8, r9, pc");
- TEST_UNSUPPORTED(".short 0xfb89,0x780d @ smull r7, r8, r9, sp");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb89f80a) " @ smull pc, r8, r9, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb89d80a) " @ smull sp, r8, r9, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb897f0a) " @ smull r7, pc, r9, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb897d0a) " @ smull r7, sp, r9, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb8f780a) " @ smull r7, r8, pc, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb8d780a) " @ smull r7, r8, sp, r10");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb89780f) " @ smull r7, r8, r9, pc");
+ TEST_UNSUPPORTED(__inst_thumb32(0xfb89780d) " @ smull r7, r8, r9, sp");
TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
TEST_RR( "umull r7, r8, r",9, VAL2,", r",10, VAL1,"")
TEST_GROUP("Coprocessor instructions")
- TEST_UNSUPPORTED(".short 0xfc00,0x0000")
- TEST_UNSUPPORTED(".short 0xffff,0xffff")
+ TEST_UNSUPPORTED(__inst_thumb32(0xfc000000) "")
+ TEST_UNSUPPORTED(__inst_thumb32(0xffffffff) "")
TEST_GROUP("Testing instructions in IT blocks")
* @ start of inline data...
* .ascii "mov r0, r7" @ text title for test case
* .byte 0
- * .align 2
+ * .align 2, 0
*
* @ TEST_ARG_REG
* .byte ARG_TYPE_REG
static unsigned long next_instruction(unsigned long pc)
{
#ifdef CONFIG_THUMB2_KERNEL
- if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1)))
+ if ((pc & 1) &&
+ !is_wide_instruction(__mem_to_opcode_thumb16(*(u16 *)(pc - 1))))
return pc + 2;
else
#endif
if (test_case_is_thumb) {
u16 *p = (u16 *)(test_code & ~1);
- current_instruction = p[0];
+ current_instruction = __mem_to_opcode_thumb16(p[0]);
if (is_wide_instruction(current_instruction)) {
- current_instruction <<= 16;
- current_instruction |= p[1];
+ u16 instr2 = __mem_to_opcode_thumb16(p[1]);
+ current_instruction = __opcode_thumb32_compose(current_instruction, instr2);
}
} else {
- current_instruction = *(u32 *)test_code;
+ current_instruction = __mem_to_opcode_arm(*(u32 *)test_code);
}
if (current_title[0] == '.')
/* multiple strings to be concatenated. */ \
".ascii "#title" \n\t" \
".byte 0 \n\t" \
- ".align 2 \n\t"
+ ".align 2, 0 \n\t"
#define TEST_ARG_REG(reg, val) \
".byte "__stringify(ARG_TYPE_REG)" \n\t" \
enum probes_insn ret = kprobe_decode_ldmstm(insn, asi, d);
/* Fixup modified instruction to have halfwords in correct order...*/
- insn = asi->insn[0];
- ((u16 *)asi->insn)[0] = insn >> 16;
- ((u16 *)asi->insn)[1] = insn & 0xffff;
+ insn = __mem_to_opcode_arm(asi->insn[0]);
+ ((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(insn >> 16);
+ ((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0xffff);
return ret;
}
{
insn &= ~0x00ff;
insn |= 0x001; /* Set Rdn = R1 and Rm = R0 */
- ((u16 *)asi->insn)[0] = insn;
+ ((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(insn);
asi->insn_handler = t16_emulate_hiregs;
return INSN_GOOD;
}
* and call it with R9=SP and LR in the register list represented
* by R8.
*/
- ((u16 *)asi->insn)[0] = 0xe929; /* 1st half STMDB R9!,{} */
- ((u16 *)asi->insn)[1] = insn & 0x1ff; /* 2nd half (register list) */
+ /* 1st half STMDB R9!,{} */
+ ((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(0xe929);
+ /* 2nd half (register list) */
+ ((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0x1ff);
asi->insn_handler = t16_emulate_push;
return INSN_GOOD;
}
* and call it with R9=SP and PC in the register list represented
* by R8.
*/
- ((u16 *)asi->insn)[0] = 0xe8b9; /* 1st half LDMIA R9!,{} */
- ((u16 *)asi->insn)[1] = insn & 0x1ff; /* 2nd half (register list) */
+ /* 1st half LDMIA R9!,{} */
+ ((u16 *)asi->insn)[0] = __opcode_to_mem_thumb16(0xe8b9);
+ /* 2nd half (register list) */
+ ((u16 *)asi->insn)[1] = __opcode_to_mem_thumb16(insn & 0x1ff);
asi->insn_handler = insn & 0x100 ? t16_emulate_pop_pc
: t16_emulate_pop_nopc;
return INSN_GOOD;
#include <linux/stop_machine.h>
#include <linux/stringify.h>
#include <asm/traps.h>
+#include <asm/opcodes.h>
#include <asm/cacheflush.h>
#include <linux/percpu.h>
#include <linux/bug.h>
#ifdef CONFIG_THUMB2_KERNEL
thumb = true;
addr &= ~1; /* Bit 0 would normally be set to indicate Thumb code */
- insn = ((u16 *)addr)[0];
+ insn = __mem_to_opcode_thumb16(((u16 *)addr)[0]);
if (is_wide_instruction(insn)) {
- insn <<= 16;
- insn |= ((u16 *)addr)[1];
+ u16 inst2 = __mem_to_opcode_thumb16(((u16 *)addr)[1]);
+ insn = __opcode_thumb32_compose(insn, inst2);
decode_insn = thumb32_probes_decode_insn;
actions = kprobes_t32_actions;
} else {
thumb = false;
if (addr & 0x3)
return -EINVAL;
- insn = *p->addr;
+ insn = __mem_to_opcode_arm(*p->addr);
decode_insn = arm_probes_decode_insn;
actions = kprobes_arm_actions;
#endif
#include <linux/init.h>
#include <linux/io.h>
#include <asm/thread_notify.h>
+#include <asm/cputype.h>
static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
{
{
u32 cp_access;
+ if (!cpu_is_pj4())
+ return 0;
+
cp_access = pj4_cp_access_read() & ~0xf;
pj4_cp_access_write(cp_access);
#ifdef CONFIG_THUMB2_KERNEL
if (thumb) {
u16 *thumb_insn = (u16 *)asi->insn;
- thumb_insn[1] = 0x4770; /* Thumb bx lr */
- thumb_insn[2] = 0x4770; /* Thumb bx lr */
+ /* Thumb bx lr */
+ thumb_insn[1] = __opcode_to_mem_thumb16(0x4770);
+ thumb_insn[2] = __opcode_to_mem_thumb16(0x4770);
return insn;
}
- asi->insn[1] = 0xe12fff1e; /* ARM bx lr */
+ asi->insn[1] = __opcode_to_mem_arm(0xe12fff1e); /* ARM bx lr */
#else
- asi->insn[1] = 0xe1a0f00e; /* mov pc, lr */
+ asi->insn[1] = __opcode_to_mem_arm(0xe1a0f00e); /* mov pc, lr */
#endif
/* Make an ARM instruction unconditional */
if (insn < 0xe0000000)
if (thumb) {
u16 *ip = (u16 *)asi->insn;
if (is_wide_instruction(insn))
- *ip++ = insn >> 16;
- *ip++ = insn;
+ *ip++ = __opcode_to_mem_thumb16(insn >> 16);
+ *ip++ = __opcode_to_mem_thumb16(insn);
return;
}
#endif
- asi->insn[0] = insn;
+ asi->insn[0] = __opcode_to_mem_arm(insn);
}
/*
#include <asm/processor.h>
#include <asm/thread_notify.h>
#include <asm/stacktrace.h>
+#include <asm/system_misc.h>
#include <asm/mach/time.h>
#include <asm/tls.h>
u64 *stack = soft_restart_stack + ARRAY_SIZE(soft_restart_stack);
/* Disable interrupts first */
- local_irq_disable();
+ raw_local_irq_disable();
local_fiq_disable();
/* Disable the L2 if we're the last man standing. */
if (user_debug & UDBG_UNDEFINED) {
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
current->comm, task_pid_nr(current), pc);
+ __show_regs(regs);
dump_instr(KERN_INFO, regs);
}
#endif
v7_exit_coherency_flush(all);
/*
- * This is a harmless no-op. On platforms with a real
- * outer cache this might either be needed or not,
- * depending on where the outer cache sits.
+ * A full outer cache flush could be needed at this point
+ * on platforms with such a cache, depending on where the
+ * outer cache sits. In some cases the notion of a "last
+ * cluster standing" would need to be implemented if the
+ * outer cache is shared across clusters. In any case, when
+ * the outer cache needs flushing, there is no concurrent
+ * access to the cache controller to worry about and no
+ * special locking besides what is already provided by the
+ * MCPM state machinery is needed.
*/
- outer_flush_all();
/*
* Disable cluster-level coherency by masking
};
static const struct prot_bits section_bits[] = {
-#ifndef CONFIG_ARM_LPAE
- /* These are approximate */
+#ifdef CONFIG_ARM_LPAE
+ {
+ .mask = PMD_SECT_USER,
+ .val = PMD_SECT_USER,
+ .set = "USR",
+ }, {
+ .mask = PMD_SECT_RDONLY,
+ .val = PMD_SECT_RDONLY,
+ .set = "ro",
+ .clear = "RW",
+#elif __LINUX_ARM_ARCH__ >= 6
{
- .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
- .val = 0,
+ .mask = PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .val = PMD_SECT_APX | PMD_SECT_AP_WRITE,
.set = " ro",
}, {
- .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .mask = PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
.val = PMD_SECT_AP_WRITE,
.set = " RW",
}, {
- .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .mask = PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
.val = PMD_SECT_AP_READ,
.set = "USR ro",
}, {
- .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .mask = PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
.val = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
.set = "USR RW",
-#else
+#else /* ARMv4/ARMv5 */
+ /* These are approximate */
{
- .mask = PMD_SECT_USER,
- .val = PMD_SECT_USER,
- .set = "USR",
+ .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .val = 0,
+ .set = " ro",
}, {
- .mask = PMD_SECT_RDONLY,
- .val = PMD_SECT_RDONLY,
- .set = "ro",
- .clear = "RW",
+ .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .val = PMD_SECT_AP_WRITE,
+ .set = " RW",
+ }, {
+ .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .val = PMD_SECT_AP_READ,
+ .set = "USR ro",
+ }, {
+ .mask = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .val = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
+ .set = "USR RW",
#endif
}, {
.mask = PMD_SECT_XN,
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/vfpmacros.h>
-#include "../kernel/entry-header.S"
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
@ VFP entry point.
@
@ IRQs disabled.
@
ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT_COUNT
- ldr r4, [r10, #TI_PREEMPT] @ get preempt count
- add r11, r4, #1 @ increment it
- str r11, [r10, #TI_PREEMPT]
-#endif
+ inc_preempt_count r10, r4
enable_irq
ldr r4, .LCvfp
ldr r11, [r10, #TI_CPU] @ CPU number
ENDPROC(do_vfp)
ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT_COUNT
- get_thread_info r10
- ldr r4, [r10, #TI_PREEMPT] @ get preempt count
- sub r11, r4, #1 @ decrement it
- str r11, [r10, #TI_PREEMPT]
-#endif
+ dec_preempt_count_ti r10, r4
mov pc, lr
ENDPROC(vfp_null_entry)
__INIT
ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT_COUNT
- get_thread_info r10
- ldr r4, [r10, #TI_PREEMPT] @ get preempt count
- sub r11, r4, #1 @ decrement it
- str r11, [r10, #TI_PREEMPT]
-#endif
+ dec_preempt_count_ti r10, r4
ldr r0, VFP_arch_address
str r0, [r0] @ set to non-zero value
mov pc, r9 @ we have handled the fault
* r10 points at the start of the private FP workspace in the thread structure
* sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
*/
+#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/vfpmacros.h>
#include <linux/kern_levels.h>
-#include "../kernel/entry-header.S"
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
.macro DBGSTR, str
#ifdef DEBUG
@ else it's one 32-bit instruction, so
@ always subtract 4 from the following
@ instruction address.
-#ifdef CONFIG_PREEMPT_COUNT
- get_thread_info r10
- ldr r4, [r10, #TI_PREEMPT] @ get preempt count
- sub r11, r4, #1 @ decrement it
- str r11, [r10, #TI_PREEMPT]
-#endif
+ dec_preempt_count_ti r10, r4
mov pc, r9 @ we think we have handled things
@ not recognised by VFP
DBGSTR "not VFP"
-#ifdef CONFIG_PREEMPT_COUNT
- get_thread_info r10
- ldr r4, [r10, #TI_PREEMPT] @ get preempt count
- sub r11, r4, #1 @ decrement it
- str r11, [r10, #TI_PREEMPT]
-#endif
+ dec_preempt_count_ti r10, r4
mov pc, lr
process_exception:
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_ATOMIC64
select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
select GENERIC_SMP_IDLE_THREAD
select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
config ZONE_DMA
def_bool y
-config GENERIC_GPIO
- def_bool y
-
config FORCE_MAX_ZONEORDER
int
default "14"
If enabled, sys_bfin_spinlock function is linked
into L1 instruction memory. (less latency)
-config IP_CHECKSUM_L1
- bool "Locate IP Checksum function in L1 Memory"
- default n
- depends on !SMP
- help
- If enabled, the IP Checksum function is linked
- into L1 instruction memory. (less latency)
-
config CACHELINE_ALIGNED_L1
bool "Locate cacheline_aligned data to L1 Data Memory"
default y if !BF54x
+++ /dev/null
-/*
- * bfin_crc.h - interface to Blackfin CRC controllers
- *
- * Copyright 2012 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __BFIN_CRC_H__
-#define __BFIN_CRC_H__
-
-/* Function driver which use hardware crc must initialize the structure */
-struct crc_info {
- /* Input data address */
- unsigned char *in_addr;
- /* Output data address */
- unsigned char *out_addr;
- /* Input or output bytes */
- unsigned long datasize;
- union {
- /* CRC to compare with that of input buffer */
- unsigned long crc_compare;
- /* Value to compare with input data */
- unsigned long val_verify;
- /* Value to fill */
- unsigned long val_fill;
- };
- /* Value to program the 32b CRC Polynomial */
- unsigned long crc_poly;
- union {
- /* CRC calculated from the input data */
- unsigned long crc_result;
- /* First failed position to verify input data */
- unsigned long pos_verify;
- };
- /* CRC mirror flags */
- unsigned int bitmirr:1;
- unsigned int bytmirr:1;
- unsigned int w16swp:1;
- unsigned int fdsel:1;
- unsigned int rsltmirr:1;
- unsigned int polymirr:1;
- unsigned int cmpmirr:1;
-};
-
-/* Userspace interface */
-#define CRC_IOC_MAGIC 'C'
-#define CRC_IOC_CALC_CRC _IOWR('C', 0x01, unsigned int)
-#define CRC_IOC_MEMCPY_CRC _IOWR('C', 0x02, unsigned int)
-#define CRC_IOC_VERIFY_VAL _IOWR('C', 0x03, unsigned int)
-#define CRC_IOC_FILL_VAL _IOWR('C', 0x04, unsigned int)
-
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/miscdevice.h>
-
-struct crc_register {
- u32 control;
- u32 datacnt;
- u32 datacntrld;
- u32 __pad_1[2];
- u32 compare;
- u32 fillval;
- u32 datafifo;
- u32 intren;
- u32 intrenset;
- u32 intrenclr;
- u32 poly;
- u32 __pad_2[4];
- u32 status;
- u32 datacntcap;
- u32 __pad_3;
- u32 result;
- u32 curresult;
- u32 __pad_4[3];
- u32 revid;
-};
-
-/* CRC_STATUS Masks */
-#define CMPERR 0x00000002 /* Compare error */
-#define DCNTEXP 0x00000010 /* datacnt register expired */
-#define IBR 0x00010000 /* Input buffer ready */
-#define OBR 0x00020000 /* Output buffer ready */
-#define IRR 0x00040000 /* Immediate result readt */
-#define LUTDONE 0x00080000 /* Look-up table generation done */
-#define FSTAT 0x00700000 /* FIFO status */
-#define MAX_FIFO 4 /* Max fifo size */
-
-/* CRC_CONTROL Masks */
-#define BLKEN 0x00000001 /* Block enable */
-#define OPMODE 0x000000F0 /* Operation mode */
-#define OPMODE_OFFSET 4 /* Operation mode mask offset*/
-#define MODE_DMACPY_CRC 1 /* MTM CRC compute and compare */
-#define MODE_DATA_FILL 2 /* MTM data fill */
-#define MODE_CALC_CRC 3 /* MSM CRC compute and compare */
-#define MODE_DATA_VERIFY 4 /* MSM data verify */
-#define AUTOCLRZ 0x00000100 /* Auto clear to zero */
-#define AUTOCLRF 0x00000200 /* Auto clear to one */
-#define OBRSTALL 0x00001000 /* Stall on output buffer ready */
-#define IRRSTALL 0x00002000 /* Stall on immediate result ready */
-#define BITMIRR 0x00010000 /* Mirror bits within each byte of 32-bit input data */
-#define BITMIRR_OFFSET 16 /* Mirror bits offset */
-#define BYTMIRR 0x00020000 /* Mirror bytes of 32-bit input data */
-#define BYTMIRR_OFFSET 17 /* Mirror bytes offset */
-#define W16SWP 0x00040000 /* Mirror uppper and lower 16-bit word of 32-bit input data */
-#define W16SWP_OFFSET 18 /* Mirror 16-bit word offset */
-#define FDSEL 0x00080000 /* FIFO is written after input data is mirrored */
-#define FDSEL_OFFSET 19 /* Mirror FIFO offset */
-#define RSLTMIRR 0x00100000 /* CRC result registers are mirrored. */
-#define RSLTMIRR_OFFSET 20 /* Mirror CRC result offset. */
-#define POLYMIRR 0x00200000 /* CRC poly register is mirrored. */
-#define POLYMIRR_OFFSET 21 /* Mirror CRC poly offset. */
-#define CMPMIRR 0x00400000 /* CRC compare register is mirrored. */
-#define CMPMIRR_OFFSET 22 /* Mirror CRC compare offset. */
-
-/* CRC_INTREN Masks */
-#define CMPERRI 0x02 /* CRC_ERROR_INTR */
-#define DCNTEXPI 0x10 /* CRC_STATUS_INTR */
-
-#endif
-
-#endif
#ifndef __ASM_BFIN_TWI_H__
#define __ASM_BFIN_TWI_H__
-#include <linux/types.h>
-#include <linux/i2c.h>
-
-/*
- * All Blackfin system MMRs are padded to 32bits even if the register
- * itself is only 16bits. So use a helper macro to streamline this.
- */
-#define __BFP(m) u16 m; u16 __pad_##m
-
-/*
- * bfin twi registers layout
- */
-struct bfin_twi_regs {
- __BFP(clkdiv);
- __BFP(control);
- __BFP(slave_ctl);
- __BFP(slave_stat);
- __BFP(slave_addr);
- __BFP(master_ctl);
- __BFP(master_stat);
- __BFP(master_addr);
- __BFP(int_stat);
- __BFP(int_mask);
- __BFP(fifo_ctl);
- __BFP(fifo_stat);
- u32 __pad[20];
- __BFP(xmt_data8);
- __BFP(xmt_data16);
- __BFP(rcv_data8);
- __BFP(rcv_data16);
-};
-
-#undef __BFP
-
-struct bfin_twi_iface {
- int irq;
- spinlock_t lock;
- char read_write;
- u8 command;
- u8 *transPtr;
- int readNum;
- int writeNum;
- int cur_mode;
- int manual_stop;
- int result;
- struct i2c_adapter adap;
- struct completion complete;
- struct i2c_msg *pmsg;
- int msg_num;
- int cur_msg;
- u16 saved_clkdiv;
- u16 saved_control;
- struct bfin_twi_regs __iomem *regs_base;
-};
+#include <asm/blackfin.h>
#define DEFINE_TWI_REG(reg_name, reg) \
static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \
{ bfin_write16(&iface->regs_base->reg, v); }
DEFINE_TWI_REG(CLKDIV, clkdiv)
-DEFINE_TWI_REG(CONTROL, control)
DEFINE_TWI_REG(SLAVE_CTL, slave_ctl)
DEFINE_TWI_REG(SLAVE_STAT, slave_stat)
DEFINE_TWI_REG(SLAVE_ADDR, slave_addr)
DEFINE_TWI_REG(MASTER_ADDR, master_addr)
DEFINE_TWI_REG(INT_STAT, int_stat)
DEFINE_TWI_REG(INT_MASK, int_mask)
-DEFINE_TWI_REG(FIFO_CTL, fifo_ctl)
DEFINE_TWI_REG(FIFO_STAT, fifo_stat)
DEFINE_TWI_REG(XMT_DATA8, xmt_data8)
DEFINE_TWI_REG(XMT_DATA16, xmt_data16)
}
#endif
+static inline u16 read_FIFO_CTL(struct bfin_twi_iface *iface)
+{
+ return bfin_read16(&iface->regs_base->fifo_ctl);
+}
-/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
-#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
-#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
-
-/* TWI_PRESCALE Masks */
-#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
-#define TWI_ENA 0x0080 /* TWI Enable */
-#define SCCB 0x0200 /* SCCB Compatibility Enable */
-
-/* TWI_SLAVE_CTL Masks */
-#define SEN 0x0001 /* Slave Enable */
-#define SADD_LEN 0x0002 /* Slave Address Length */
-#define STDVAL 0x0004 /* Slave Transmit Data Valid */
-#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Address Matching Enabled */
-
-/* TWI_SLAVE_STAT Masks */
-#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL 0x0002 /* General Call Indicator */
-
-/* TWI_MASTER_CTL Masks */
-#define MEN 0x0001 /* Master Mode Enable */
-#define MADD_LEN 0x0002 /* Master Address Length */
-#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
-#define FAST 0x0008 /* Use Fast Mode Timing Specs */
-#define STOP 0x0010 /* Issue Stop Condition */
-#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
-#define DCNT 0x3FC0 /* Data Bytes To Transfer */
-#define SDAOVR 0x4000 /* Serial Data Override */
-#define SCLOVR 0x8000 /* Serial Clock Override */
-
-/* TWI_MASTER_STAT Masks */
-#define MPROG 0x0001 /* Master Transfer In Progress */
-#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
-#define ANAK 0x0004 /* Address Not Acknowledged */
-#define DNAK 0x0008 /* Data Not Acknowledged */
-#define BUFRDERR 0x0010 /* Buffer Read Error */
-#define BUFWRERR 0x0020 /* Buffer Write Error */
-#define SDASEN 0x0040 /* Serial Data Sense */
-#define SCLSEN 0x0080 /* Serial Clock Sense */
-#define BUSBUSY 0x0100 /* Bus Busy Indicator */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
-#define SINIT 0x0001 /* Slave Transfer Initiated */
-#define SCOMP 0x0002 /* Slave Transfer Complete */
-#define SERR 0x0004 /* Slave Transfer Error */
-#define SOVF 0x0008 /* Slave Overflow */
-#define MCOMP 0x0010 /* Master Transfer Complete */
-#define MERR 0x0020 /* Master Transfer Error */
-#define XMTSERV 0x0040 /* Transmit FIFO Service */
-#define RCVSERV 0x0080 /* Receive FIFO Service */
-
-/* TWI_FIFO_CTRL Masks */
-#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
-#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
-#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
-#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
-
-/* TWI_FIFO_STAT Masks */
-#define XMTSTAT 0x0003 /* Transmit FIFO Status */
-#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
-#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
-#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
+static inline void write_FIFO_CTL(struct bfin_twi_iface *iface, u16 v)
+{
+ bfin_write16(&iface->regs_base->fifo_ctl, v);
+ SSYNC();
+}
-#define RCVSTAT 0x000C /* Receive FIFO Status */
-#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
-#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
-#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
+static inline u16 read_CONTROL(struct bfin_twi_iface *iface)
+{
+ return bfin_read16(&iface->regs_base->control);
+}
+static inline void write_CONTROL(struct bfin_twi_iface *iface, u16 v)
+{
+ SSYNC();
+ bfin_write16(&iface->regs_base->control, v);
+}
#endif
}
static inline void enable_dma(unsigned int channel)
{
- dma_ch[channel].regs->curr_x_count = 0;
- dma_ch[channel].regs->curr_y_count = 0;
dma_ch[channel].regs->cfg |= DMAEN;
}
int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data);
#define P_DONTCARE 0x1000
#ifdef CONFIG_PINCTRL
-#include <asm/irq_handler.h>
+int bfin_internal_set_wake(unsigned int irq, unsigned int state);
#define gpio_pint_regs bfin_pint_regs
#define adi_internal_set_wake bfin_internal_set_wake
-#define peripheral_request(per, label) 0
+#define peripheral_request(per, label) (0)
#define peripheral_free(per)
-#define peripheral_request_list(per, label) \
- (pdev ? (IS_ERR(devm_pinctrl_get_select_default(&pdev->dev)) \
- ? -EINVAL : 0) : 0)
+#define peripheral_request_list(per, label) (0)
#define peripheral_free_list(per)
#else
int peripheral_request(unsigned short per, const char *label);
#include <linux/err.h>
#include <linux/pinctrl/pinctrl.h>
#include <mach/portmux.h>
-#include <linux/gpio.h>
+#include <mach/gpio.h>
#ifndef P_SPORT2_TFS
#define P_SPORT2_TFS P_UNDEF
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/i2c/bfin_twi.h>
#include <asm/blackfin.h>
#include <asm/gpio.h>
#include <linux/kallsyms.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/seq_file.h>
#include <asm/irq_handler.h>
#include <asm/trace.h>
#include <asm/pda.h>
#endif
#ifdef CONFIG_PROC_FS
-int show_interrupts(struct seq_file *p, void *v)
+int arch_show_interrupts(struct seq_file *p, int prec)
{
- int i = *(loff_t *) v, j;
- struct irqaction *action;
- unsigned long flags;
-
- if (i < NR_IRQS) {
- struct irq_desc *desc = irq_to_desc(i);
-
- raw_spin_lock_irqsave(&desc->lock, flags);
- action = desc->action;
- if (!action)
- goto skip;
- seq_printf(p, "%3d: ", i);
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
- seq_printf(p, " %8s", irq_desc_get_chip(desc)->name);
- seq_printf(p, " %s", action->name);
- for (action = action->next; action; action = action->next)
- seq_printf(p, " %s", action->name);
-
- seq_putc(p, '\n');
- skip:
- raw_spin_unlock_irqrestore(&desc->lock, flags);
- } else if (i == NR_IRQS) {
- seq_printf(p, "NMI: ");
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
- seq_printf(p, " CORE Non Maskable Interrupt\n");
- seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
- }
+ int j;
+
+ seq_printf(p, "%*s: ", prec, "NMI");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
+ seq_printf(p, " CORE Non Maskable Interrupt\n");
+ seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
return 0;
}
#endif
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezbrd_partitions[] = {
{
.name = "bootloader(nor)",
static struct resource ezbrd_flash_resource = {
.start = 0x20000000,
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
.end = 0x202fffff,
#else
.end = 0x203fffff,
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = {
P_MII0_ETxD0,
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
{
-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
.addr = 3,
#else
.addr = 1,
.phydev_data = bfin_phydev_data,
.phy_mode = PHY_INTERFACE_MODE_MII,
.mac_peripherals = bfin_mac_peripherals,
-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
.phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
#endif
.vlan1_mask = 1,
}
};
-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
static struct dsa_chip_data ksz8893m_switch_chip_data = {
.mii_bus = &bfin_mii_bus.dev,
.port_names = {
#endif
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-#if defined(CONFIG_NET_DSA_KSZ8893M) \
- || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
{
.modalias = "ksz8893m",
.max_speed_hz = 5000000,
#endif
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = 2,
},
#endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
&& defined(CONFIG_SND_SOC_WM8731_SPI)
{
.modalias = "wm8731",
.mode = SPI_MODE_0,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 1,
},
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
};
/* SPI controller data */
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 6,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
},
#endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
};
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_RSI,
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
-#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+#if IS_ENABLED(CONFIG_NET_DSA_KSZ8893M)
&ksz8893m_switch_device,
#endif
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
&bfin_spi1_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
&bf51x_sdh_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezbrd_flash_device,
#endif
};
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
peripheral_request(P_AMS2, "ParaFlash");
-#if !defined(CONFIG_SPI_BFIN5XX) && !defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if !IS_ENABLED(CONFIG_SPI_BFIN5XX)
peripheral_request(P_AMS3, "ParaFlash");
#endif
return 0;
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition tcm_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = 2,
},
#endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
&& defined(CONFIG_SND_SOC_WM8731_SPI)
{
.modalias = "wm8731",
.mode = SPI_MODE_0,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 1,
},
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
};
/* SPI controller data */
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 6,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
#endif
};
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_RSI,
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
&bfin_spi1_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
&bf51x_sdh_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&tcm_flash_device,
#endif
};
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
};
#endif
-#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
static struct resource bf52x_ra158z_resources[] = {
{
.start = IRQ_PPI_ERROR,
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ad7160eval_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 4,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 30000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
#include <linux/input/ad7160.h>
static const struct ad7160_platform_data bfin_ad7160_ts_info = {
.sensor_x_res = 854,
};
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TOUCHSCREEN_AD7160) || defined(CONFIG_TOUCHSCREEN_AD7160_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7160)
{
I2C_BOARD_INFO("ad7160", 0x33),
.irq = IRQ_PH1,
#endif
};
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
&bfin_dpmc,
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_FB_BFIN_RA158Z) || defined(CONFIG_FB_BFIN_RA158Z_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_RA158Z)
&bf52x_ra158z_device,
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ad7160eval_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
};
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
};
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
};
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
};
#endif
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 4,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = 2,
},
#endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
&& defined(CONFIG_SND_SOC_WM8731_SPI)
{
.modalias = "wm8731",
.mode = SPI_MODE_0,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
};
#endif /* spi master and devices */
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition cm_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
},
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
};
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_dpmc,
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&cm_flash_device,
#endif
};
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezbrd_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = 2,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+#if IS_ENABLED(CONFIG_SND_SOC_WM8731) \
&& defined(CONFIG_SND_SOC_WM8731_SPI)
{
.modalias = "wm8731",
.mode = SPI_MODE_0,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 1,
},
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
#endif
};
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
},
};
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
&bfin_dpmc,
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezbrd_flash_device,
#endif
};
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
};
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
};
#endif
-#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
static struct resource bf52x_t350mcqb_resources[] = {
{
};
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
};
#endif
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static const u16 bfin_snd_pin[][7] = {
{P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.4",
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = 2,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 1,
},
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
};
#endif
-#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
#include <linux/mfd/adp5520.h>
/*
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PF8,
},
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
{
I2C_BOARD_INFO("ad7879", 0x2C),
.irq = IRQ_PF8,
.platform_data = (void *)&bfin_ad7879_ts_info,
},
#endif
-#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
{
I2C_BOARD_INFO("pmic-adp5520", 0x32),
.irq = IRQ_PF9,
.platform_data = (void *)&adp5520_pdev_data,
},
#endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2f),
},
#endif
-#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
{
I2C_BOARD_INFO("adau1373", 0x1A),
},
#endif
};
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
};
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
&bfin_dpmc,
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
&bf52x_t350mcqb_device,
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97_pcm,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
- defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
};
#include <asm/portmux.h>
#include <asm/dpmc.h>
-#if defined(CONFIG_TOUCHSCREEN_AD7879) \
- || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
#define LCD_BACKLIGHT_GPIO 0x40
/* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xffc03800,
};
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
};
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition tll6527m_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_DECODER)
/* An SN74LVC138A 3:8 decoder chip has been used to generate 7 augmented
* outputs used as SPI CS lines for all SPI SLAVE devices on TLL6527v1-0.
* EXP_GPIO_SPISEL_BASE is the base number for the expanded outputs being
#endif
-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl345_info = {
.x_axis_offset = 0,
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879) \
- || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
.x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
#include <linux/spi/mcp23s08.h>
static const struct mcp23s08_platform_data bfin_mcp23s08_sys_gpio_info = {
.chip[0].is_present = true,
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
/*
.mode = SPI_MODE_0,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) \
- || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 10000000,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if defined(CONFIG_GPIO_MCP23S08) || defined(CONFIG_GPIO_MCP23S08_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_MCP23S08)
{
.modalias = "mcp23s08",
.platform_data = &bfin_mcp23s08_sys_gpio_info,
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = EXP_GPIO_SPISEL_BASE + 8 + MAX_CTRL_CS,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) \
- || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
{
I2C_BOARD_INFO("ad7879", 0x2C),
.irq = IRQ_PH14,
.platform_data = (void *)&bfin_ad7879_ts_info,
},
#endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
{
I2C_BOARD_INFO("ltc3576", 0x09),
},
-#if defined(CONFIG_INPUT_ADXL34X_I2C) \
- || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PH13,
#endif
};
-#if defined(CONFIG_SERIAL_BFIN_SPORT) \
- || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) \
- || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&tll6527m_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_GPIO_DECODER) || defined(CONFIG_GPIO_DECODER_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_DECODER)
&spi_decoded_gpio,
#endif
};
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
*/
const char bfin_board_name[] = "HV Sistemas H8606";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
/*
* Driver needs to know address, irq and flag pin.
*/
- #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader (spi)",
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 16,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
#include <linux/serial_8250.h>
#include <linux/serial.h>
#endif
-#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
/*
* Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
#endif
static struct platform_device *h8606_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_8250)
&serial8250_device,
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
&opencores_kbd_device,
#endif
};
printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
*/
const char bfin_board_name[] = "BlackStamp";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
/*
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
};
if (ret < 0)
return ret;
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
/*
* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
* the bfin-async-map driver takes care of flipping between
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
*/
const char bfin_board_name[] = "Bluetechnix CM BF533";
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
};
#endif /* spi master and devices */
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
&bfin_dpmc,
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
¶_flash_device,
#endif
};
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf533_devices, ARRAY_SIZE(cm_bf533_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
return 0;
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
*/
const char bfin_board_name[] = "ADI BF533-EZKIT";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions_a[] = {
{
.name = "bootloader(nor a)",
};
#endif
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
static struct platdata_mtd_ram sram_data_a = {
.mapname = "Flash A SRAM",
.bankwidth = 2,
};
#endif
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 4,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
};
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
};
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
&bfin_dpmc,
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device_a,
&ezkit_flash_device_b,
#endif
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
&sram_device_a,
&sram_device_b,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97,
#endif
};
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <asm/irq.h>
* Driver needs to know address, irq and flag pin.
*/
#if defined(CONFIG_BFIN532_IP0X)
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
#include <linux/dm9000.h>
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, /* if 1 - block!!! */
};
/* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 2,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20300000,
static struct platform_device *ip0x_devices[] __initdata = {
#if defined(CONFIG_BFIN532_IP0X)
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device1,
&dm9000_device2,
#endif
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&spi_bfin_master_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
};
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
*/
const char bfin_board_name[] = "ADI BF533-STAMP";
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
/*
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
+#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
static struct mtd_partition stamp_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
static int bfin_mmc_spi_init(struct device *dev,
irqreturn_t (*detect_int)(int, void *), void *data)
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
- defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
{
.modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 1,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
- defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
static struct resource bfin_sport0_resources[] = {
{
.start = SPORT0_TCR1,
};
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
+#if IS_ENABLED(CONFIG_JOYSTICK_AD7142)
{
I2C_BOARD_INFO("ad7142_joystick", 0x2C),
.irq = 39,
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = 39,
},
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2f),
},
},
};
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
- defined(CONFIG_SND_BF5XX_AC97) || \
- defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+ IS_ENABLED(CONFIG_SND_BF5XX_AC97)
#include <asm/bfin_sport.h>
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.4",
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
- defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
static const unsigned ad73311_gpio[] = {
GPIO_PF4,
};
};
#endif
-#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
static struct platform_device bfin_ad73311_codec_device = {
.name = "ad73311",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
static struct platform_device bfin_ad74111_codec_device = {
.name = "ad74111",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
- defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
- defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || \
- defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
-#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
+#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
&stamp_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97_pcm,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
- defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
- defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
&bfin_ad73311_machine,
#endif
-#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
&bfin_ad73311_codec_device,
#endif
-#if defined(CONFIG_SND_SOC_AD74111) || defined(CONFIG_SND_SOC_AD74111_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
&bfin_ad74111_codec_device,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || \
- defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || \
- defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
&bfin_ac97,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
/* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */
if (ret < 0)
return ret;
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
/*
* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
* the bfin-async-map driver takes care of flipping between
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
*/
const char bfin_board_name[] = "Bluetechnix CM BF537E";
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
};
#endif /* spi master and devices */
-#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
/* SPORT SPI controller data */
static struct bfin5xx_spi_master bfin_sport_spi0_info = {
#endif /* sport spi master and devices */
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition cm_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \
-|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
+|| IS_ENABLED(CONFIG_BFIN_SPORT)
unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
};
#endif
#endif
-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
static struct resource bfin_sport0_resources[] = {
{
.start = SPORT0_TCR1,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF14
static struct pata_platform_info bfin_pata_platform_data = {
&bfin_dpmc,
-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
&bfin_sport0_device,
#endif
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
&bfin_sport_spi0_device,
&bfin_sport_spi1_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&cm_flash_device,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PG14, "net2272");
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
*/
const char bfin_board_name[] = "Bluetechnix CM BF537U";
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
};
#endif /* spi master and devices */
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20200000,
};
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition cm_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF14
static struct pata_platform_info bfin_pata_platform_data = {
&bfin_dpmc,
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&cm_flash_device,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PH15, driver_name);
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537u_devices, ARRAY_SIZE(cm_bf537u_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
#define FLASH_MAC 0x202f0000
#define CONFIG_MTD_PHYSMAP_LEN 0x300000
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition asmb_flash_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, /* use no dma transfer with this chip*/
#endif
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
/* This mapping is for at45db642 it has 1056 page size,
* partition size and offset should be page aligned
*/
static struct spi_board_info bfin_spi_board_info[] __initdata = {
/* SD/MMC card reader at SPI bus */
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000,
#endif
/* 8 Megabyte Atmel NOR flash chip at SPI bus */
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
{
.modalias = "mtd_dataflash",
.max_speed_hz = 16700000,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
static struct platform_device *dnp5370_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&asmb_flash_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&spi_bfin_master_device,
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
*/
const char bfin_board_name[] = "CamSig Minotaur BF537";
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
/* Partition sizes */
#define FLASH_SIZE 0x00400000
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
};
#endif /* spi master and devices */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
static struct platform_device *minotaur_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 4,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
};
#endif /* spi master and devices */
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
static struct platform_device bfin_fb_device = {
.name = "bf537-lq035",
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
&bfin_fb_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info,
ARRAY_SIZE(bfin_spi_board_info));
#endif
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/i2c.h>
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
};
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
};
#endif
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
static struct resource bfin_pcmcia_cf_resources[] = {
{
.start = 0x20310000, /* IO PORT */
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x203FB800,
};
#endif
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_SL811_HCD)
static struct resource sl811_hcd_resources[] = {
{
.start = 0x20340000,
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20360000,
};
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
};
};
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
static struct mtd_partition bfin_plat_nand_partitions[] = {
static void bfin_plat_nand_init(void) {}
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition stamp_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
#include <linux/input/ad714x.h>
static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
};
#endif
-#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
#include <linux/input/ad714x.h>
static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
{
};
#endif
-#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+#if IS_ENABLED(CONFIG_AD2S90)
static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
-static unsigned short ad2s120x_platform_data[] = {
+#if IS_ENABLED(CONFIG_AD2S1200)
+static unsigned short ad2s1200_platform_data[] = {
/* used as SAMPLE and RDVEL */
GPIO_PF5, GPIO_PF6, 0
};
-static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
+static struct bfin5xx_spi_chip ad2s1200_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+#if IS_ENABLED(CONFIG_AD2S1210)
static unsigned short ad2s1210_platform_data[] = {
/* use as SAMPLE, A0, A1 */
GPIO_PF7, GPIO_PF8, GPIO_PF9,
};
#endif
-#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
+#if IS_ENABLED(CONFIG_SENSORS_AD7314)
static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
.enable_dma = 0,
};
#endif
-#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
+#if IS_ENABLED(CONFIG_AD7816)
static unsigned short ad7816_platform_data[] = {
GPIO_PF4, /* rdwr_pin */
GPIO_PF5, /* convert_pin */
};
#endif
-#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
+#if IS_ENABLED(CONFIG_ADT7310)
static unsigned long adt7310_platform_data[3] = {
/* INT bound temperature alarm event. line 1 */
IRQ_PG4, IRQF_TRIGGER_LOW,
};
#endif
-#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
+#if IS_ENABLED(CONFIG_AD7298)
static unsigned short ad7298_platform_data[] = {
GPIO_PF7, /* busy_pin */
0,
};
#endif
-#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
+#if IS_ENABLED(CONFIG_ADT7316_SPI)
static unsigned long adt7316_spi_data[2] = {
IRQF_TRIGGER_LOW, /* interrupt flags */
GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
static int bfin_mmc_spi_init(struct device *dev,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
#include <linux/spi/ad7877.h>
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
};
#endif
-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
};
#endif
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+#if IS_ENABLED(CONFIG_ENC28J60)
static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
.enable_dma = 1,
};
#endif
-#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
+#if IS_ENABLED(CONFIG_ADF702X)
#include <linux/spi/adf702x.h>
#define TXREG 0x0160A470
static const u32 adf7021_regs[] = {
static inline void adf702x_mac_init(void) {}
#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
#include <linux/spi/ads7846.h>
static int ads7873_get_pendown_state(void)
{
};
#endif
-#if defined(CONFIG_MTD_DATAFLASH) \
- || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
static struct mtd_partition bfin_spi_dataflash_partitions[] = {
{
};
#endif
-#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
+#if IS_ENABLED(CONFIG_AD7476)
static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_MTD_DATAFLASH) \
- || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
{
.modalias = "ad1836",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
{
.modalias = "adav801",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_AD714X_SPI)
{
.modalias = "ad714x_captouch",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
+#if IS_ENABLED(CONFIG_AD2S90)
{
.modalias = "ad2s90",
.bus_num = 0,
},
#endif
-#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
+#if IS_ENABLED(CONFIG_AD2S1200)
{
- .modalias = "ad2s120x",
+ .modalias = "ad2s1200",
.bus_num = 0,
.chip_select = 4, /* CS, change it for your board */
- .platform_data = ad2s120x_platform_data,
- .controller_data = &ad2s120x_spi_chip_info,
+ .platform_data = ad2s1200_platform_data,
+ .controller_data = &ad2s1200_spi_chip_info,
},
#endif
-#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
+#if IS_ENABLED(CONFIG_AD2S1210)
{
.modalias = "ad2s1210",
.max_speed_hz = 8192000,
},
#endif
-#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
+#if IS_ENABLED(CONFIG_SENSORS_AD7314)
{
.modalias = "ad7314",
.max_speed_hz = 1000000,
},
#endif
-#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
+#if IS_ENABLED(CONFIG_AD7816)
{
.modalias = "ad7818",
.max_speed_hz = 1000000,
},
#endif
-#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
+#if IS_ENABLED(CONFIG_ADT7310)
{
.modalias = "adt7310",
.max_speed_hz = 1000000,
},
#endif
-#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
+#if IS_ENABLED(CONFIG_AD7298)
{
.modalias = "ad7298",
.max_speed_hz = 1000000,
},
#endif
-#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
+#if IS_ENABLED(CONFIG_ADT7316_SPI)
{
.modalias = "adt7316",
.max_speed_hz = 1000000,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = 1,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 1,
},
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_CPHA | SPI_CPOL,
},
#endif
-#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+#if IS_ENABLED(CONFIG_ENC28J60)
{
.modalias = "enc28j60",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_0,
},
#endif
-#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
{
.modalias = "adxl34x",
.platform_data = &adxl34x_info,
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
+#if IS_ENABLED(CONFIG_ADF702X)
{
.modalias = "adf702x",
.max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_0,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
{
.modalias = "ads7846",
.max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_0,
},
#endif
-#if defined(CONFIG_AD7476) \
- || defined(CONFIG_AD7476_MODULE)
+#if IS_ENABLED(CONFIG_AD7476)
{
.modalias = "ad7476", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_ADE7753) \
- || defined(CONFIG_ADE7753_MODULE)
+#if IS_ENABLED(CONFIG_ADE7753)
{
.modalias = "ade7753",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_1,
},
#endif
-#if defined(CONFIG_ADE7754) \
- || defined(CONFIG_ADE7754_MODULE)
+#if IS_ENABLED(CONFIG_ADE7754)
{
.modalias = "ade7754",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_1,
},
#endif
-#if defined(CONFIG_ADE7758) \
- || defined(CONFIG_ADE7758_MODULE)
+#if IS_ENABLED(CONFIG_ADE7758)
{
.modalias = "ade7758",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_1,
},
#endif
-#if defined(CONFIG_ADE7759) \
- || defined(CONFIG_ADE7759_MODULE)
+#if IS_ENABLED(CONFIG_ADE7759)
{
.modalias = "ade7759",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_1,
},
#endif
-#if defined(CONFIG_ADE7854_SPI) \
- || defined(CONFIG_ADE7854_SPI_MODULE)
+#if IS_ENABLED(CONFIG_ADE7854_SPI)
{
.modalias = "ade7854",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_ADIS16060) \
- || defined(CONFIG_ADIS16060_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16060)
{
.modalias = "adis16060_r",
.max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_1,
},
#endif
-#if defined(CONFIG_ADIS16130) \
- || defined(CONFIG_ADIS16130_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16130)
{
.modalias = "adis16130",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_ADIS16201) \
- || defined(CONFIG_ADIS16201_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16201)
{
.modalias = "adis16201",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16203) \
- || defined(CONFIG_ADIS16203_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16203)
{
.modalias = "adis16203",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16204) \
- || defined(CONFIG_ADIS16204_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16204)
{
.modalias = "adis16204",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16209) \
- || defined(CONFIG_ADIS16209_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16209)
{
.modalias = "adis16209",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16220) \
- || defined(CONFIG_ADIS16220_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16220)
{
.modalias = "adis16220",
.max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16240) \
- || defined(CONFIG_ADIS16240_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16240)
{
.modalias = "adis16240",
.max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16260) \
- || defined(CONFIG_ADIS16260_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16260)
{
.modalias = "adis16260",
.max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16261) \
- || defined(CONFIG_ADIS16261_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16261)
{
.modalias = "adis16261",
.max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_ADIS16300) \
- || defined(CONFIG_ADIS16300_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16300)
{
.modalias = "adis16300",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16350) \
- || defined(CONFIG_ADIS16350_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16350)
{
.modalias = "adis16364",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
.irq = IRQ_PF4,
},
#endif
-#if defined(CONFIG_ADIS16400) \
- || defined(CONFIG_ADIS16400_MODULE)
+#if IS_ENABLED(CONFIG_ADIS16400)
{
.modalias = "adis16400",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
};
#endif /* spi master and devices */
-#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
/* SPORT SPI controller data */
static struct bfin5xx_spi_master bfin_sport_spi0_info = {
#endif /* sport spi master and devices */
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
static struct platform_device bfin_fb_device = {
.name = "bf537_lq035",
};
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
};
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
.pin_req = ppi_req,
};
-#if defined(CONFIG_VIDEO_VS6624) \
- || defined(CONFIG_VIDEO_VS6624_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
static struct v4l2_input vs6624_inputs[] = {
{
.index = 0,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
};
#endif
-#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
[0] = KEY_GRAVE,
[1] = KEY_1,
};
#endif
-#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
#include <linux/mfd/adp5520.h>
/*
#endif
-#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_ADP5588)
static struct adp5588_gpio_platform_data adp5588_gpio_data = {
.gpio_start = 50,
.pullup_dis_mask = 0,
};
#endif
-#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
#include <linux/i2c/adp8870.h>
static struct led_info adp8870_leds[] = {
{
};
#endif
-#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
#include <linux/i2c/adp8860.h>
static struct led_info adp8860_leds[] = {
{
};
#endif
-#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
static struct regulator_consumer_supply ad5398_consumer = {
.supply = "current",
};
.consumer_supplies = &ad5398_consumer,
};
-#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
- defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
static struct platform_device ad5398_virt_consumer_device = {
.name = "reg-virt-consumer",
.id = 0,
},
};
#endif
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
- defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
static struct regulator_bulk_data ad5398_bulk_data = {
.supply = "current",
};
#endif
#endif
-#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
+#if IS_ENABLED(CONFIG_ADT7410)
/* INT bound temperature alarm event. line 1 */
static unsigned long adt7410_platform_data[2] = {
IRQ_PG4, IRQF_TRIGGER_LOW,
};
#endif
-#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
+#if IS_ENABLED(CONFIG_ADT7316_I2C)
/* INT bound temperature alarm event. line 1 */
static unsigned long adt7316_i2c_data[2] = {
IRQF_TRIGGER_LOW, /* interrupt flags */
},
#endif
-#if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAV80X)
{
I2C_BOARD_INFO("adav803", 0x10),
},
#endif
-#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_AD714X_I2C)
{
I2C_BOARD_INFO("ad7142_captouch", 0x2C),
.irq = IRQ_PG5,
},
#endif
-#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
+#if IS_ENABLED(CONFIG_AD7150)
{
I2C_BOARD_INFO("ad7150", 0x48),
.irq = IRQ_PG5, /* fixme: use real interrupt number */
},
#endif
-#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
+#if IS_ENABLED(CONFIG_AD7152)
{
I2C_BOARD_INFO("ad7152", 0x48),
},
#endif
-#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
+#if IS_ENABLED(CONFIG_AD774X)
{
I2C_BOARD_INFO("ad774x", 0x48),
},
#endif
-#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
+#if IS_ENABLED(CONFIG_ADE7854_I2C)
{
I2C_BOARD_INFO("ade7854", 0x38),
},
#endif
-#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
+#if IS_ENABLED(CONFIG_SENSORS_LM75)
{
I2C_BOARD_INFO("adt75", 0x9),
.irq = IRQ_PG5,
},
#endif
-#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
+#if IS_ENABLED(CONFIG_ADT7410)
{
I2C_BOARD_INFO("adt7410", 0x48),
/* CT critical temperature event. line 0 */
},
#endif
-#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
+#if IS_ENABLED(CONFIG_AD7291)
{
I2C_BOARD_INFO("ad7291", 0x20),
.irq = IRQ_PG5,
},
#endif
-#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
+#if IS_ENABLED(CONFIG_ADT7316_I2C)
{
I2C_BOARD_INFO("adt7316", 0x48),
.irq = IRQ_PG6,
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = IRQ_PG6,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
{
I2C_BOARD_INFO("ad7879", 0x2F),
.irq = IRQ_PG5,
.platform_data = (void *)&bfin_ad7879_ts_info,
},
#endif
-#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_ADP5588)
{
I2C_BOARD_INFO("adp5588-keys", 0x34),
.irq = IRQ_PG0,
.platform_data = (void *)&adp5588_kpad_data,
},
#endif
-#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
+#if IS_ENABLED(CONFIG_PMIC_ADP5520)
{
I2C_BOARD_INFO("pmic-adp5520", 0x32),
.irq = IRQ_PG0,
.platform_data = (void *)&adp5520_pdev_data,
},
#endif
-#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PG3,
.platform_data = (void *)&adxl34x_info,
},
#endif
-#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
+#if IS_ENABLED(CONFIG_GPIO_ADP5588)
{
I2C_BOARD_INFO("adp5588-gpio", 0x34),
.platform_data = (void *)&adp5588_gpio_data,
},
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_7393)
{
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
{
I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
},
#endif
-#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8870)
{
I2C_BOARD_INFO("adp8870", 0x2B),
.platform_data = (void *)&adp8870_pdata,
},
#endif
-#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1371)
{
I2C_BOARD_INFO("adau1371", 0x1A),
},
#endif
-#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
{
I2C_BOARD_INFO("adau1761", 0x38),
},
#endif
-#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1361)
{
I2C_BOARD_INFO("adau1361", 0x38),
},
#endif
-#if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1701)
{
I2C_BOARD_INFO("adau1701", 0x34),
},
#endif
-#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
+#if IS_ENABLED(CONFIG_AD525X_DPOT)
{
I2C_BOARD_INFO("ad5258", 0x18),
},
#endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#endif
-#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
{
I2C_BOARD_INFO("ad5398", 0xC),
.platform_data = (void *)&ad5398_regulator_data,
},
#endif
-#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
+#if IS_ENABLED(CONFIG_BACKLIGHT_ADP8860)
{
I2C_BOARD_INFO("adp8860", 0x2A),
.platform_data = (void *)&adp8860_pdata,
},
#endif
-#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
{
I2C_BOARD_INFO("adau1373", 0x1A),
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2e),
},
#endif
};
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \
-|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT) \
+|| IS_ENABLED(CONFIG_BFIN_SPORT)
unsigned short bfin_sport0_peripherals[] = {
P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
};
#endif
#endif
-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
static struct resource bfin_sport0_resources[] = {
{
.start = SPORT0_TCR1,
},
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
},
};
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
- defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+ IS_ENABLED(CONFIG_SND_BF5XX_AC97)
#define SPORT_REQ(x) \
[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.4",
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
- defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
static const unsigned ad73311_gpio[] = {
GPIO_PF4,
};
};
#endif
-#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
static struct platform_device bfin_ad73311_codec_device = {
.name = "ad73311",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
static struct platform_device bfin_eval_adav801_device = {
.name = "bfin-eval-adav801",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
#define REGULATOR_ADP122 "adp122"
#define REGULATOR_ADP122_UV 2500000
},
};
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
- defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
static struct regulator_bulk_data adp122_bulk_data = {
.supply = REGULATOR_ADP122,
};
#endif
#endif
-#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
- defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
+#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
static struct resource iio_gpio_trigger_resources[] = {
[0] = {
};
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
static struct platform_device bf5xx_adau1373_device = {
.name = "bfin-eval-adau1373",
};
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
static struct platform_device bf5xx_adau1701_device = {
.name = "bfin-eval-adau1701",
};
static struct platform_device *stamp_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SPORT)
&bfin_sport0_device,
#endif
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
&bfin_pcmcia_cf_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_SL811_HCD)
&sl811_hcd_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+#if IS_ENABLED(CONFIG_DM9000)
&dm9000_device,
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN_SPORT)
&bfin_sport_spi0_device,
&bfin_sport_spi1_device,
#endif
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF537_LQ035)
&bfin_fb_device,
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
&bfin_async_nand_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&stamp_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97_pcm,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
- defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || \
- defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
&bfin_ad73311_machine,
#endif
-#if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
&bfin_ad73311_codec_device,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
&bfin_ac97,
#endif
-#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
-#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
- defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_AD5398)
+#if IS_ENABLED(CONFIG_REGULATOR_VIRTUAL_CONSUMER)
&ad5398_virt_consumer_device,
#endif
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
- defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
&ad5398_userspace_consumer_device,
#endif
#endif
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE)
&adp_switch_device,
-#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
- defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
+#if IS_ENABLED(CONFIG_REGULATOR_USERSPACE_CONSUMER)
&adp122_userspace_consumer_device,
#endif
#endif
-#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
- defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
+#if IS_ENABLED(CONFIG_IIO_GPIO_TRIGGER)
&iio_gpio_trigger,
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373)
&bf5xx_adau1373_device,
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701)
&bf5xx_adau1701_device,
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X)
&bfin_eval_adav801_device,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PF6, "net2272");
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
*/
const char bfin_board_name[] = "Bluetechnix TCM BF537";
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
};
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0,
};
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
};
#endif /* spi master and devices */
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x20308000,
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x20300000,
};
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
static struct mtd_partition cm_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF14
static struct pata_platform_info bfin_pata_platform_data = {
&bfin_dpmc,
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_MAC)
&bfin_mii_bus,
&bfin_mac_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
-#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+#if IS_ENABLED(CONFIG_MTD_GPIO_ADDR)
&cm_flash_device,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PG14, "net2272");
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
*/
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif /* CONFIG_RTC_DRV_BFIN */
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif /* CONFIG_SERIAL_BFIN_UART2 */
#endif /* CONFIG_SERIAL_BFIN */
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif /* CONFIG_BFIN_SIR2 */
#endif /* CONFIG_BFIN_SIR */
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */
#endif /* CONFIG_SERIAL_BFIN_SPORT */
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
};
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif /* CONFIG_SMC91X */
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
#endif /* CONFIG_MTD_M25P80 */
#endif /* CONFIG_SPI_BFIN5XX */
-#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
.model = 7879, /* Model = AD7879 */
};
#endif /* CONFIG_TOUCHSCREEN_AD7879 */
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
#include <asm/bfin-lq035q1.h>
static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
#endif /* CONFIG_FB_BFIN_LQ035Q1 */
static struct spi_board_info bf538_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.mode = SPI_MODE_3,
},
#endif /* CONFIG_MTD_M25P80 */
-#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
{
.modalias = "ad7879",
.platform_data = &bfin_ad7879_ts_info,
.mode = SPI_CPHA | SPI_CPOL,
},
#endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
{
.modalias = "bfin-lq035q1-spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_CPHA | SPI_CPOL,
},
#endif /* CONFIG_FB_BFIN_LQ035Q1 */
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
},
};
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
};
#endif /* CONFIG_I2C_BLACKFIN_TWI */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
},
};
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
static struct resource ezkit_flash_resource = {
.start = 0x20000000,
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
.end = 0x202fffff,
#else
.end = 0x203fffff,
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bf538_spi_master0,
&bf538_spi_master1,
&bf538_spi_master2,
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
&i2c_bfin_twi1_device,
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
&bfin_lq035q1_device,
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
};
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bf538_spi_board_info,
ARRAY_SIZE(bf538_spi_board_info));
#endif
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
#include <mach/bf54x-lq043.h>
};
#endif
-#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
static unsigned int bf548_keymap[] = {
KEYVAL(0, 0, KEY_ENTER),
KEYVAL(0, 1, KEY_HELP),
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
};
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xFFC03C00,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+#if IS_ENABLED(CONFIG_PATA_BF54X)
static struct resource bfin_atapi_resources[] = {
{
.start = 0xFFC03800,
};
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "linux kernel(nand)",
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_SDH,
.irq_int0 = IRQ_SDH_MASK0,
};
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
};
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
#endif
static struct spi_board_info bf54x_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = 2,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
};
#endif /* spi master and devices */
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
&bfin_dpmc,
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
&bf54x_lq043_device,
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+#if IS_ENABLED(CONFIG_PATA_BF54X)
&bfin_atapi_device,
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
&bf54x_sdh_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bf54x_spi_master0,
&bf54x_spi_master1,
#endif
-#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
&bf54x_kpad_device,
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
¶_flash_device,
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can_device,
#endif
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bf54x_spi_board_info,
ARRAY_SIZE(bf54x_spi_board_info));
#endif
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
};
#endif
-#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
#include <mach/bf54x-lq043.h>
};
#endif
-#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
static const unsigned int bf548_keymap[] = {
KEYVAL(0, 0, KEY_ENTER),
KEYVAL(0, 1, KEY_HELP),
};
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
};
#endif
-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
};
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xFFC03C00,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can0_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
#endif
-#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+#if IS_ENABLED(CONFIG_PATA_BF54X)
static struct resource bfin_atapi_resources[] = {
{
.start = 0xFFC03800,
};
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_SDH,
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = MAX_CTRL_CS + GPIO_PG6, /* SPI_SSEL2 */
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = MAX_CTRL_CS + GPIO_PE5, /* SPI_SSEL2 */
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = MAX_CTRL_CS + GPIO_PE4, /* SPI_SSEL1 */
},
#endif
-#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
{
.modalias = "adxl34x",
.platform_data = &adxl34x_info,
},
#endif
};
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
.pin_req = ppi_req,
};
-#if defined(CONFIG_VIDEO_VS6624) \
- || defined(CONFIG_VIDEO_VS6624_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
static struct v4l2_input vs6624_inputs[] = {
{
.index = 0,
};
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
},
#endif
-#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_PCF8574)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
.irq = 212,
},
#endif
-#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PC5,
.platform_data = (void *)&adxl34x_info,
},
#endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
{
I2C_BOARD_INFO("ad5252", 0x2f),
},
};
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
},
};
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
- defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
+ IS_ENABLED(CONFIG_SND_BF5XX_AC97)
#define SPORT_REQ(x) \
[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97_pcm = {
.name = "bfin-ac97-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
static struct platform_device bfin_ad73311_codec_device = {
.name = "ad73311",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980)
static struct platform_device bfin_ad1980_codec_device = {
.name = "ad1980",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
&bfin_gpj_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
+#if IS_ENABLED(CONFIG_FB_BF54X_LQ043)
&bf54x_lq043_device,
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can0_device,
&bfin_can1_device,
#endif
-#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
+#if IS_ENABLED(CONFIG_PATA_BF54X)
&bfin_atapi_device,
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
&bf54x_sdh_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bf54x_spi_master0,
&bf54x_spi_master1,
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
-#if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_BFIN)
&bf54x_kpad_device,
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97_pcm,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1980)
&bfin_ad1980_codec_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97,
#endif
};
#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
-/* Bit masks for HOST_CONTROL */
-
-#define HOST_EN 0x1 /* Host Enable */
-#define HOST_END 0x2 /* Host Endianess */
-#define DATA_SIZE 0x4 /* Data Size */
-#define HOST_RST 0x8 /* Host Reset */
-#define HRDY_OVR 0x20 /* Host Ready Override */
-#define INT_MODE 0x40 /* Interrupt Mode */
-#define BT_EN 0x80 /* Bus Timeout Enable */
-#define EHW 0x100 /* Enable Host Write */
-#define EHR 0x200 /* Enable Host Read */
-#define BDR 0x400 /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define DMA_READY 0x1 /* DMA Ready */
-#define FIFOFULL 0x2 /* FIFO Full */
-#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define DMA_COMPLETE 0x8 /* DMA Complete */
-#define HSHK 0x10 /* Host Handshake */
-#define HSTIMEOUT 0x20 /* Host Timeout */
-#define HIRQ 0x40 /* Host Interrupt Request */
-#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define DMA_DIR 0x100 /* DMA Direction */
-#define BTE 0x200 /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
-
/* Bit masks for TIMER_ENABLE1 */
#define TIMEN8 0x1 /* Timer 8 Enable */
#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
-/* Bit masks for HOST_CONTROL */
-
-#define HOST_EN 0x1 /* Host Enable */
-#define HOST_END 0x2 /* Host Endianess */
-#define DATA_SIZE 0x4 /* Data Size */
-#define HOST_RST 0x8 /* Host Reset */
-#define HRDY_OVR 0x20 /* Host Ready Override */
-#define INT_MODE 0x40 /* Interrupt Mode */
-#define BT_EN 0x80 /* Bus Timeout Enable */
-#define EHW 0x100 /* Enable Host Write */
-#define EHR 0x200 /* Enable Host Read */
-#define BDR 0x400 /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define DMA_READY 0x1 /* DMA Ready */
-#define FIFOFULL 0x2 /* FIFO Full */
-#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define DMA_COMPLETE 0x8 /* DMA Complete */
-#define HSHK 0x10 /* Host Handshake */
-#define HSTIMEOUT 0x20 /* Host Timeout */
-#define HIRQ 0x40 /* Host Interrupt Request */
-#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define DMA_DIR 0x100 /* DMA Direction */
-#define BTE 0x200 /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
-
/* Bit masks for KPAD_CTL */
#define KPAD_EN 0x1 /* Keypad Enable */
*/
const char bfin_board_name[] = "Acvilon board";
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
},
};
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
static struct platdata_mtd_ram mtd_ram_data = {
.mapname = "rootfs(RAM)",
.bankwidth = 4,
};
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
{
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
static struct mtd_partition bfin_plat_nand_partitions[] = {
{
}
#endif
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
static struct mtd_partition bfin_spi_dataflash_partitions[] = {
{
.name = "bootloader",
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 3,
},
#endif
-#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+#if IS_ENABLED(CONFIG_MTD_DATAFLASH)
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
static struct platform_device *acvilon_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
&bfin_gpios_device,
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
&bfin_i2c_pca_device,
-#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
&bfin_async_nand_device,
#endif
-#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PLATRAM)
&mtd_ram_device,
#endif
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
#endif
#include <linux/ata_platform.h>
*/
const char bfin_board_name[] = "Bluetechnix CM BF561";
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* all SPI peripherals info goes here */
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
},
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.chip_select = 4,
},
#endif
-#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#if IS_ENABLED(CONFIG_MMC_SPI)
{
.modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
#endif /* spi master and devices */
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
static struct platform_device hitachi_fb_device = {
.name = "hitachi-tx09",
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
#include <linux/smsc911x.h>
static struct resource smsc911x_resources[] = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x24000000,
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
static struct resource isp1362_hcd_resources[] = {
{
.start = 0x24008000,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
#define PATA_INT IRQ_PF46
static struct pata_platform_info bfin_pata_platform_data = {
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition para_partitions[] = {
{
.name = "bootloader(nor)",
&bfin_dpmc,
-#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+#if IS_ENABLED(CONFIG_FB_HITACHI_TX09)
&hitachi_fb_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
&smsc911x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
&bfin_pata_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
¶_flash_device,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PF46, "net2272");
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices));
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#if IS_ENABLED(CONFIG_PATA_PLATFORM)
irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN);
#endif
*/
const char bfin_board_name[] = "ADI BF561-EZKIT";
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
#include <linux/usb/isp1362.h>
static struct resource isp1362_hcd_resources[] = {
};
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
static struct resource net2272_bfin_resources[] = {
{
.start = 0x2C000000,
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
#include <linux/smc91x.h>
static struct smc91x_platdata smc91x_info = {
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
- || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
{
.modalias = "ad183x",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
#endif
};
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
};
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
#include <linux/i2c-gpio.h>
static struct i2c_gpio_platform_data i2c_gpio_data = {
},
};
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
.pin_req = ppi_req,
};
-#if defined(CONFIG_VIDEO_ADV7183) \
- || defined(CONFIG_VIDEO_ADV7183_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_ADV7183)
#include <media/adv7183.h>
static struct v4l2_input adv7183_inputs[] = {
{
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s = {
.name = "bfin-i2s",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
static struct platform_device bfin_ac97 = {
.name = "bfin-ac97",
.id = CONFIG_SND_BF5XX_SPORT_NUM,
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.4",
&bfin_dpmc,
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
&smc91x_device,
#endif
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
&net2272_bfin_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_GPIO)
&i2c_gpio_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
&isp1362_hcd_device,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
&bfin_ac97,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
- defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
};
static int __init net2272_init(void)
{
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+#if IS_ENABLED(CONFIG_USB_NET2272)
int ret;
ret = gpio_request(GPIO_PF11, "net2272");
if (ret < 0)
return ret;
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12));
SSYNC();
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD183X) || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15));
bfin_write_FIO0_FLAG_S(1 << 15);
SSYNC();
.resource = smc91x_resources,
};
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
static struct platform_device *tepla_devices[] __initdata = {
&smc91x_device,
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
* Driver needs to know address, irq and flag pin.
*/
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
[0] = {
};
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
};
#endif
-#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
+#if IS_ENABLED(CONFIG_STMMAC_ETH)
#include <linux/stmmac.h>
#include <linux/phy.h>
};
#endif
-#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
};
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
static struct platform_device rtc_device = {
.name = "rtc-bfin",
.id = -1,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
static struct resource musb_resources[] = {
[0] = {
.start = 0xFFCC1000,
};
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
{
#endif
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
static unsigned short bfin_can0_peripherals[] = {
P_CAN0_RX, P_CAN0_TX, 0
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
static struct mtd_partition partition_info[] = {
{
.name = "bootloader(nand)",
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
static struct bfin_sd_host bfin_sdh_data = {
.dma_chan = CH_RSI,
};
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
static struct mtd_partition ezkit_partitions[] = {
{
.name = "bootloader(nor)",
};
#endif
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
/* SPI flash chip (w25q32) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
};
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
static struct bfin_spi3_chip spidev_chip_info = {
.enable_dma = true,
};
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
static struct platform_device bfin_i2s_pcm = {
.name = "bfin-i2s-pcm-audio",
.id = -1,
};
#endif
-#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
- defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
#include <asm/bfin_sport3.h>
static struct resource bfin_snd_resources[] = {
{
};
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
- || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
static const char * const ad1836_link[] = {
"bfin-i2s.0",
"spi0.76",
};
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
static struct platform_device adau1761_device = {
.name = "bfin-eval-adau1x61",
};
#endif
-#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
#include <sound/adau17x1.h>
static struct adau1761_platform_data adau1761_info = {
.lineout_mode = ADAU1761_OUTPUT_MODE_LINE,
};
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_capture.h>
#include <media/blackfin/ppi.h>
P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
-#if !defined(CONFIG_VIDEO_VS6624) && !defined(CONFIG_VIDEO_VS6624_MODULE)
+#if !IS_ENABLED(CONFIG_VIDEO_VS6624)
P_PPI0_D16, P_PPI0_D17, P_PPI0_D18, P_PPI0_D19,
P_PPI0_D20, P_PPI0_D21, P_PPI0_D22, P_PPI0_D23,
#endif
.pin_req = ppi_req,
};
-#if defined(CONFIG_VIDEO_VS6624) \
- || defined(CONFIG_VIDEO_VS6624_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_VS6624)
static struct v4l2_input vs6624_inputs[] = {
{
.index = 0,
};
#endif
-#if defined(CONFIG_VIDEO_ADV7842) \
- || defined(CONFIG_VIDEO_ADV7842_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_ADV7842)
#include <media/adv7842.h>
static struct v4l2_input adv7842_inputs[] = {
};
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
- || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_display.h>
#include <media/blackfin/ppi.h>
.pin_req = ppi_req_disp,
};
-#if defined(CONFIG_VIDEO_ADV7511) \
- || defined(CONFIG_VIDEO_ADV7511_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_ADV7511)
#include <media/adv7511.h>
static struct v4l2_output adv7511_outputs[] = {
};
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
static const struct ad7877_platform_data bfin_ad7877_ts_info = {
.model = 7877,
.vref_delay_usecs = 50, /* internal, no capacitor */
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
#include <linux/input.h>
#include <linux/gpio_keys.h>
#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
- || defined(CONFIG_MTD_M25P80_MODULE)
+#if IS_ENABLED(CONFIG_MTD_M25P80)
{
/* the modalias must be the same as spi device driver name */
.modalias = "m25p80", /* Name of spi_driver for this device */
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
.chip_select = MAX_CTRL_CS + GPIO_PC15, /* SPI_SSEL4 */
},
#endif
-#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+#if IS_ENABLED(CONFIG_SPI_SPIDEV)
{
.modalias = "spidev",
.max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
.controller_data = &spidev_chip_info,
},
#endif
-#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_SPI)
{
.modalias = "adxl34x",
.platform_data = &adxl34x_info,
};
#endif /* spi master and devices */
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
static struct resource bfin_twi0_resource[] = {
#endif
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
-#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_ADXL34X_I2C)
{
I2C_BOARD_INFO("adxl34x", 0x53),
.irq = IRQ_PC5,
.platform_data = (void *)&adxl34x_info,
},
#endif
-#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_ADAU1761)
{
I2C_BOARD_INFO("adau1761", 0x38),
.platform_data = (void *)&adau1761_info
},
#endif
-#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
{
I2C_BOARD_INFO("ssm2602", 0x1b),
},
&bfin_gpg_device,
#endif
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
&rtc_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
#ifdef CONFIG_SERIAL_BFIN_UART0
&bfin_uart0_device,
#endif
#endif
#endif
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#if IS_ENABLED(CONFIG_BFIN_SIR)
#ifdef CONFIG_BFIN_SIR0
&bfin_sir0_device,
#endif
#endif
#endif
-#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE)
+#if IS_ENABLED(CONFIG_STMMAC_ETH)
&bfin_eth_device,
#endif
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
&musb_device,
#endif
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
&bfin_isp1760_device,
#endif
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
&bfin_sport0_uart_device,
#endif
#endif
#endif
-#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_CAN_BFIN)
&bfin_can0_device,
#endif
-#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
&bfin_nand_device,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+#if IS_ENABLED(CONFIG_SDH_BFIN)
&bfin_sdh_device,
#endif
&bf60x_spi_master1,
#endif
-#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
+#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
&bfin_rotary_device,
#endif
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
&i2c_bfin_twi0_device,
#if !defined(CONFIG_BF542)
&i2c_bfin_twi1_device,
&bfin_crypto_crc_device,
#endif
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
&ezkit_flash_device,
#endif
-#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
&bfin_i2s_pcm,
#endif
-#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \
- defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF6XX_SOC_I2S)
&bfin_i2s,
#endif
-#if defined(CONFIG_SND_BF5XX_SOC_AD1836) || \
- defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
&bfin_ad1836_machine,
#endif
-#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \
- defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE)
+#if IS_ENABLED(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61)
&adau1761_device,
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
- || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE)
&bfin_capture_device,
#endif
-#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
- || defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_DISPLAY)
&bfin_display_device,
#endif
PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"),
PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", NULL, "ppi2_16b"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", NULL, "ppi0_16b"),
-#if defined(CONFIG_VIDEO_MT9M114) || defined(CONFIG_VIDEO_MT9M114_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_MT9M114)
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_8b"),
-#elif defined(CONFIG_VIDEO_VS6624) || defined(CONFIG_VIDEO_VS6624_MODULE)
+#elif IS_ENABLED(CONFIG_VIDEO_VS6624)
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_16b"),
#else
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_24b"),
bfin_write32(reg, val2);
}
-static void clk_reg_set_bits(u32 reg, uint32_t mask)
-{
- u32 val;
-
- val = bfin_read32(reg);
- val |= mask;
- bfin_write32(reg, val);
-}
-
-static void clk_reg_clear_bits(u32 reg, uint32_t mask)
-{
- u32 val;
-
- val = bfin_read32(reg);
- val &= ~mask;
- bfin_write32(reg, val);
-}
-
int wait_for_pll_align(void)
{
int i = 10000;
#ifdef CONFIG_PM_BFIN_WAKE_PB15
wakeup |= PB15WE;
-# if CONFIG_PM_BFIN_WAKE_PA15_POL
+# if CONFIG_PM_BFIN_WAKE_PB15_POL
wakeup_pol |= PB15WE;
# endif
#endif
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
select ARCH_USE_CMPXCHG_LOCKREF
+ select HAVE_ARCH_AUDITSYSCALL
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
config MICROBLAZE
def_bool y
select ARCH_MIGHT_HAVE_PC_PARPORT
- select HAVE_MEMBLOCK
- select HAVE_MEMBLOCK_NODE_MAP
- select HAVE_FUNCTION_TRACER
- select HAVE_FUNCTION_TRACE_MCOUNT_TEST
- select HAVE_FUNCTION_GRAPH_TRACER
- select HAVE_DYNAMIC_FTRACE
- select HAVE_FTRACE_MCOUNT_RECORD
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select HAVE_OPROFILE
- select HAVE_ARCH_KGDB
- select HAVE_DMA_ATTRS
- select HAVE_DMA_API_DEBUG
- select TRACING_SUPPORT
- select OF
- select OF_EARLY_FLATTREE
select ARCH_WANT_IPC_PARSE_VERSION
- select HAVE_DEBUG_KMEMLEAK
- select IRQ_DOMAIN
- select VIRT_TO_BUS
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select BUILDTIME_EXTABLE_SORT
+ select CLKSRC_OF
+ select CLONE_BACKWARDS3
+ select COMMON_CLK
+ select GENERIC_ATOMIC64
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_CPU_DEVICES
+ select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
- select GENERIC_CPU_DEVICES
- select GENERIC_ATOMIC64
- select GENERIC_CLOCKEVENTS
- select COMMON_CLK
select GENERIC_SCHED_CLOCK
- select GENERIC_IDLE_POLL_SETUP
+ select HAVE_ARCH_KGDB
+ select HAVE_DEBUG_KMEMLEAK
+ select HAVE_DMA_API_DEBUG
+ select HAVE_DMA_ATTRS
+ select HAVE_DYNAMIC_FTRACE
+ select HAVE_FTRACE_MCOUNT_RECORD
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+ select HAVE_FUNCTION_TRACER
+ select HAVE_MEMBLOCK
+ select HAVE_MEMBLOCK_NODE_MAP
+ select HAVE_OPROFILE
+ select IRQ_DOMAIN
select MODULES_USE_ELF_RELA
- select CLONE_BACKWARDS3
- select CLKSRC_OF
- select BUILDTIME_EXTABLE_SORT
+ select OF
+ select OF_EARLY_FLATTREE
+ select TRACING_SUPPORT
+ select VIRT_TO_BUS
config SWAP
def_bool n
source "kernel/Kconfig.freezer"
-source "arch/microblaze/platform/Kconfig.platform"
+source "arch/microblaze/Kconfig.platform"
menu "Processor type and features"
--- /dev/null
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+
+config OPT_LIB_FUNCTION
+ bool "Optimalized lib function"
+ default y
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ They are optimized by using word alignment. This will work
+ fine if both source and destination are aligned on the same
+ boundary. However, if they are aligned on different boundaries
+ shifts will be necessary. This might result in bad performance
+ on MicroBlaze systems without a barrel shifter.
+
+config OPT_LIB_ASM
+ bool "Optimalized lib function ASM"
+ depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
+ default n
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ Function are written in asm code.
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+
+config KERNEL_BASE_ADDR
+ hex "Physical address where Linux Kernel is"
+ default "0x90000000"
+ help
+ BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+ string "Targeted FPGA family"
+ default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+ int "USE_MSR_INSTR range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+ int "USE_PCMP_INSTR range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_BARREL
+ int "USE_BARREL range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_DIV
+ int "USE_DIV range (0:1)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+ int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
+ default 0
+
+config XILINX_MICROBLAZE0_USE_FPU
+ int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
+ default 0
+
+config XILINX_MICROBLAZE0_HW_VER
+ string "Core version number"
+ default 7.10.d
+
+endmenu
libs-y += arch/microblaze/lib/
core-y += arch/microblaze/kernel/
core-y += arch/microblaze/mm/
-core-y += arch/microblaze/platform/
core-$(CONFIG_PCI) += arch/microblaze/pci/
drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
+++ /dev/null
-../../platform/generic/system.dts
\ No newline at end of file
--- /dev/null
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,microblaze";
+ hard-reset-gpios = <&LEDs_8Bit 2 1>;
+ model = "testing";
+ DDR2_SDRAM: memory@90000000 {
+ device_type = "memory";
+ reg = < 0x90000000 0x10000000 >;
+ } ;
+ aliases {
+ ethernet0 = &Hard_Ethernet_MAC;
+ serial0 = &RS232_Uart_1;
+ } ;
+ chosen {
+ bootargs = "console=ttyUL0,115200 highres=on";
+ linux,stdout-path = "/plb@0/serial@84000000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ microblaze_0: cpu@0 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,microblaze-7.10.d";
+ d-cache-baseaddr = <0x90000000>;
+ d-cache-highaddr = <0x9fffffff>;
+ d-cache-line-size = <0x10>;
+ d-cache-size = <0x2000>;
+ device_type = "cpu";
+ i-cache-baseaddr = <0x90000000>;
+ i-cache-highaddr = <0x9fffffff>;
+ i-cache-line-size = <0x10>;
+ i-cache-size = <0x2000>;
+ model = "microblaze,7.10.d";
+ reg = <0>;
+ timebase-frequency = <125000000>;
+ xlnx,addr-tag-bits = <0xf>;
+ xlnx,allow-dcache-wr = <0x1>;
+ xlnx,allow-icache-wr = <0x1>;
+ xlnx,area-optimized = <0x0>;
+ xlnx,cache-byte-size = <0x2000>;
+ xlnx,d-lmb = <0x1>;
+ xlnx,d-opb = <0x0>;
+ xlnx,d-plb = <0x1>;
+ xlnx,data-size = <0x20>;
+ xlnx,dcache-addr-tag = <0xf>;
+ xlnx,dcache-always-used = <0x1>;
+ xlnx,dcache-byte-size = <0x2000>;
+ xlnx,dcache-line-len = <0x4>;
+ xlnx,dcache-use-fsl = <0x1>;
+ xlnx,debug-enabled = <0x1>;
+ xlnx,div-zero-exception = <0x1>;
+ xlnx,dopb-bus-exception = <0x0>;
+ xlnx,dynamic-bus-sizing = <0x1>;
+ xlnx,edge-is-positive = <0x1>;
+ xlnx,family = "virtex5";
+ xlnx,endianness = <0x1>;
+ xlnx,fpu-exception = <0x1>;
+ xlnx,fsl-data-size = <0x20>;
+ xlnx,fsl-exception = <0x0>;
+ xlnx,fsl-links = <0x0>;
+ xlnx,i-lmb = <0x1>;
+ xlnx,i-opb = <0x0>;
+ xlnx,i-plb = <0x1>;
+ xlnx,icache-always-used = <0x1>;
+ xlnx,icache-line-len = <0x4>;
+ xlnx,icache-use-fsl = <0x1>;
+ xlnx,ill-opcode-exception = <0x1>;
+ xlnx,instance = "microblaze_0";
+ xlnx,interconnect = <0x1>;
+ xlnx,interrupt-is-edge = <0x0>;
+ xlnx,iopb-bus-exception = <0x0>;
+ xlnx,mmu-dtlb-size = <0x4>;
+ xlnx,mmu-itlb-size = <0x2>;
+ xlnx,mmu-tlb-access = <0x3>;
+ xlnx,mmu-zones = <0x10>;
+ xlnx,number-of-pc-brk = <0x1>;
+ xlnx,number-of-rd-addr-brk = <0x0>;
+ xlnx,number-of-wr-addr-brk = <0x0>;
+ xlnx,opcode-0x0-illegal = <0x1>;
+ xlnx,pvr = <0x2>;
+ xlnx,pvr-user1 = <0x0>;
+ xlnx,pvr-user2 = <0x0>;
+ xlnx,reset-msr = <0x0>;
+ xlnx,sco = <0x0>;
+ xlnx,unaligned-exceptions = <0x1>;
+ xlnx,use-barrel = <0x1>;
+ xlnx,use-dcache = <0x1>;
+ xlnx,use-div = <0x1>;
+ xlnx,use-ext-brk = <0x1>;
+ xlnx,use-ext-nm-brk = <0x1>;
+ xlnx,use-extended-fsl-instr = <0x0>;
+ xlnx,use-fpu = <0x2>;
+ xlnx,use-hw-mul = <0x2>;
+ xlnx,use-icache = <0x1>;
+ xlnx,use-interrupt = <0x1>;
+ xlnx,use-mmu = <0x3>;
+ xlnx,use-msr-instr = <0x1>;
+ xlnx,use-pcmp-instr = <0x1>;
+ } ;
+ } ;
+ mb_plb: plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+ ranges ;
+ FLASH: flash@a0000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xa0000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x1f40>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x0>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x2af8>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
+ Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ranges ;
+ ethernet@81c00000 {
+ compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 5 2 >;
+ llink-connected = <&PIM3>;
+ local-mac-address = [ 00 0a 35 00 00 00 ];
+ reg = < 0x81c00000 0x40 >;
+ xlnx,bus2core-clk-ratio = <0x1>;
+ xlnx,phy-type = <0x1>;
+ xlnx,phyaddr = <0x1>;
+ xlnx,rxcsum = <0x0>;
+ xlnx,rxfifo = <0x1000>;
+ xlnx,temac-type = <0x0>;
+ xlnx,txcsum = <0x0>;
+ xlnx,txfifo = <0x1000>;
+ } ;
+ } ;
+ IIC_EEPROM: i2c@81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x7735940>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x0>;
+ xlnx,sda-inertial-delay = <0x0>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
+ LEDs_8Bit: gpio@81400000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ reg = < 0x81400000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0x8>;
+ xlnx,interrupt-present = <0x1>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ } ;
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ label = "Heartbeat";
+ gpios = <&LEDs_8Bit 4 1>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ yellow {
+ label = "Yellow";
+ gpios = <&LEDs_8Bit 5 1>;
+ };
+
+ red {
+ label = "Red";
+ gpios = <&LEDs_8Bit 6 1>;
+ };
+
+ green {
+ label = "Green";
+ gpios = <&LEDs_8Bit 7 1>;
+ };
+ } ;
+ RS232_Uart_1: serial@84000000 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ current-speed = <115200>;
+ device_type = "serial";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 8 0 >;
+ port-number = <0>;
+ reg = < 0x84000000 0x10000 >;
+ xlnx,baudrate = <0x1c200>;
+ xlnx,data-bits = <0x8>;
+ xlnx,family = "virtex5";
+ xlnx,odd-parity = <0x0>;
+ xlnx,use-parity = <0x0>;
+ } ;
+ SysACE_CompactFlash: sysace@83600000 {
+ compatible = "xlnx,xps-sysace-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 4 2 >;
+ reg = < 0x83600000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,mem-width = <0x10>;
+ } ;
+ debug_module: debug@84400000 {
+ compatible = "xlnx,mdm-1.00.d";
+ reg = < 0x84400000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,interconnect = <0x1>;
+ xlnx,jtag-chain = <0x2>;
+ xlnx,mb-dbg-ports = <0x1>;
+ xlnx,uart-width = <0x8>;
+ xlnx,use-uart = <0x1>;
+ xlnx,write-fsl-ports = <0x0>;
+ } ;
+ mpmc@90000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,mpmc-4.02.a";
+ ranges ;
+ PIM3: sdma@84600180 {
+ compatible = "xlnx,ll-dma-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 2 2 1 2 >;
+ reg = < 0x84600180 0x80 >;
+ } ;
+ } ;
+ xps_intc_0: interrupt-controller@81800000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x81800000 0x10000 >;
+ xlnx,kind-of-intr = <0x100>;
+ xlnx,num-intr-inputs = <0x9>;
+ } ;
+ xps_timer_1: timer@83c00000 {
+ compatible = "xlnx,xps-timer-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 3 2 >;
+ reg = < 0x83c00000 0x10000 >;
+ xlnx,count-width = <0x20>;
+ xlnx,family = "virtex5";
+ xlnx,gen0-assert = <0x1>;
+ xlnx,gen1-assert = <0x1>;
+ xlnx,one-timer-only = <0x0>;
+ xlnx,trig0-assert = <0x1>;
+ xlnx,trig1-assert = <0x1>;
+ } ;
+ } ;
+} ;
#include <asm/page.h>
#include <linux/types.h>
#include <linux/mm.h> /* Get struct page {...} */
-#include <asm-generic/iomap.h>
#ifndef CONFIG_PCI
#define _IO_BASE 0
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
#define PCI_DRAM_OFFSET pci_dram_offset
-#endif
+struct pci_dev;
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#define pci_iounmap pci_iounmap
extern unsigned long isa_io_base;
-extern unsigned long pci_io_base;
extern unsigned long pci_dram_offset;
-
extern resource_size_t isa_mem_base;
+#endif
+#define PCI_IOBASE ((void __iomem *)_IO_BASE)
#define IO_SPACE_LIMIT (0xFFFFFFFF)
-/* the following is needed to support PCI with some drivers */
-
-#define mmiowb()
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
- return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
- return *(volatile unsigned short __force *)addr;
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
- return *(volatile unsigned int __force *)addr;
-}
-static inline unsigned long __raw_readq(const volatile void __iomem *addr)
-{
- return *(volatile unsigned long __force *)addr;
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
- *(volatile unsigned char __force *)addr = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
- *(volatile unsigned short __force *)addr = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
- *(volatile unsigned int __force *)addr = v;
-}
-static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
-{
- *(volatile unsigned long __force *)addr = v;
-}
-
-/*
- * read (readb, readw, readl, readq) and write (writeb, writew,
- * writel, writeq) accessors are for PCI and thus little endian.
- * Linux 2.4 for Microblaze had this wrong.
- */
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
- return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
- return le16_to_cpu(*(volatile unsigned short __force *)addr);
-}
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
- return le32_to_cpu(*(volatile unsigned int __force *)addr);
-}
-#define readq readq
-static inline u64 readq(const volatile void __iomem *addr)
-{
- return le64_to_cpu(__raw_readq(addr));
-}
-static inline void writeb(unsigned char v, volatile void __iomem *addr)
-{
- *(volatile unsigned char __force *)addr = v;
-}
-static inline void writew(unsigned short v, volatile void __iomem *addr)
-{
- *(volatile unsigned short __force *)addr = cpu_to_le16(v);
-}
-static inline void writel(unsigned int v, volatile void __iomem *addr)
-{
- *(volatile unsigned int __force *)addr = cpu_to_le32(v);
-}
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
-
-/* ioread and iowrite variants. thease are for now same as __raw_
- * variants of accessors. we might check for endianess in the feature
- */
-#define ioread8(addr) __raw_readb((u8 *)(addr))
-#define ioread16(addr) __raw_readw((u16 *)(addr))
-#define ioread32(addr) __raw_readl((u32 *)(addr))
-#define iowrite8(v, addr) __raw_writeb((u8)(v), (u8 *)(addr))
-#define iowrite16(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
-
-#define ioread16be(addr) __raw_readw((u16 *)(addr))
-#define ioread32be(addr) __raw_readl((u32 *)(addr))
-#define iowrite16be(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32be(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
-
-/* These are the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl, the "string" versions
- * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
- * inb_p/inw_p/...
- * The macros don't do byte-swapping.
- */
-#define inb(port) readb((u8 *)((unsigned long)(port)))
-#define outb(val, port) writeb((val), (u8 *)((unsigned long)(port)))
-#define inw(port) readw((u16 *)((unsigned long)(port)))
-#define outw(val, port) writew((val), (u16 *)((unsigned long)(port)))
-#define inl(port) readl((u32 *)((unsigned long)(port)))
-#define outl(val, port) writel((val), (u32 *)((unsigned long)(port)))
-
-#define inb_p(port) inb((port))
-#define outb_p(val, port) outb((val), (port))
-#define inw_p(port) inw((port))
-#define outw_p(val, port) outw((val), (port))
-#define inl_p(port) inl((port))
-#define outl_p(val, port) outl((val), (port))
-
-#define memset_io(a, b, c) memset((void *)(a), (b), (c))
-#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
-#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
-
#ifdef CONFIG_MMU
-
-#define phys_to_virt(addr) ((void *)__phys_to_virt(addr))
-#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr))
-#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr))
-
#define page_to_bus(page) (page_to_phys(page))
-#define bus_to_virt(addr) (phys_to_virt(addr))
extern void iounmap(void __iomem *addr);
-/*extern void *__ioremap(phys_addr_t address, unsigned long size,
- unsigned long flags);*/
-extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#define ioremap_writethrough(addr, size) ioremap((addr), (size))
-#define ioremap_nocache(addr, size) ioremap((addr), (size))
-#define ioremap_fullcache(addr, size) ioremap((addr), (size))
-
-#else /* CONFIG_MMU */
-
-/**
- * virt_to_phys - map virtual addresses to physical
- * @address: address to remap
- *
- * The returned physical address is the physical (CPU) mapping for
- * the memory address given. It is only valid to use this function on
- * addresses directly mapped or allocated via kmalloc.
- *
- * This function does not give bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-static inline unsigned long __iomem virt_to_phys(volatile void *address)
-{
- return __pa((unsigned long)address);
-}
-
-#define virt_to_bus virt_to_phys
-
-/**
- * phys_to_virt - map physical address to virtual
- * @address: address to remap
- *
- * The returned virtual address is a current CPU mapping for
- * the memory address given. It is only valid to use this function on
- * addresses that have a kernel mapping
- *
- * This function does not handle bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-static inline void *phys_to_virt(unsigned long address)
-{
- return (void *)__va(address);
-}
-#define bus_to_virt(a) phys_to_virt(a)
-
-static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
- unsigned long flags)
-{
- return (void *)address;
-}
-
-#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr))
-#define iounmap(addr) ((void)0)
-#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#define ioremap_writethrough(addr, size) ioremap((addr), (size))
+#define ioremap_nocache(addr, size) ioremap((addr), (size))
+#define ioremap_fullcache(addr, size) ioremap((addr), (size))
+#define ioremap_wc(addr, size) ioremap((addr), (size))
#endif /* CONFIG_MMU */
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-/*
- * Big Endian
- */
+/* Big Endian */
#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
#define out_be16(a, v) __raw_writew((v), (a))
#define writel_be(v, a) out_be32((__force unsigned *)a, v)
#define readl_be(a) in_be32((__force unsigned *)a)
-/*
- * Little endian
- */
-
+/* Little endian */
#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
#define out_8(a, v) __raw_writeb((v), (a))
#define in_8(a) __raw_readb(a)
-#define mmiowb()
-
-#define ioport_map(port, nr) ((void __iomem *)(port))
-#define ioport_unmap(addr)
-
-/* from asm-generic/io.h */
-#ifndef insb
-static inline void insb(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u8 *buf = buffer;
- do {
- u8 x = inb(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-#endif
-
-#ifndef insw
-static inline void insw(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u16 *buf = buffer;
- do {
- u16 x = inw(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-#endif
-
-#ifndef insl
-static inline void insl(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u32 *buf = buffer;
- do {
- u32 x = inl(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-#endif
-
-#ifndef outsb
-static inline void outsb(unsigned long addr, const void *buffer, int count)
-{
- if (count) {
- const u8 *buf = buffer;
- do {
- outb(*buf++, addr);
- } while (--count);
- }
-}
-#endif
-
-#ifndef outsw
-static inline void outsw(unsigned long addr, const void *buffer, int count)
-{
- if (count) {
- const u16 *buf = buffer;
- do {
- outw(*buf++, addr);
- } while (--count);
- }
-}
-#endif
-
-#ifndef outsl
-static inline void outsl(unsigned long addr, const void *buffer, int count)
-{
- if (count) {
- const u32 *buf = buffer;
- do {
- outl(*buf++, addr);
- } while (--count);
- }
-}
-#endif
-
-#define ioread8_rep(p, dst, count) \
- insb((unsigned long) (p), (dst), (count))
-#define ioread16_rep(p, dst, count) \
- insw((unsigned long) (p), (dst), (count))
-#define ioread32_rep(p, dst, count) \
- insl((unsigned long) (p), (dst), (count))
-
-#define iowrite8_rep(p, src, count) \
- outsb((unsigned long) (p), (src), (count))
-#define iowrite16_rep(p, src, count) \
- outsw((unsigned long) (p), (src), (count))
-#define iowrite32_rep(p, src, count) \
- outsl((unsigned long) (p), (src), (count))
+#include <asm-generic/io.h>
#define readb_relaxed readb
#define readw_relaxed readw
}
/* Free all resources held by a thread. */
-extern inline void release_thread(struct task_struct *dead_task)
+static inline void release_thread(struct task_struct *dead_task)
{
}
extern char *klimit;
-void early_printk(const char *fmt, ...);
-
int setup_early_printk(char *opt);
void remap_early_printk(void);
void disable_early_printk(void);
-void heartbeat(void);
-void setup_heartbeat(void);
+void microblaze_heartbeat(void);
+void microblaze_setup_heartbeat(void);
# ifdef CONFIG_MMU
extern void mmu_reset(void);
#define __NR_settimeofday 79 /* ok */
#define __NR_getgroups 80 /* ok */
#define __NR_setgroups 81 /* ok */
-#define __NR_select 82 /* obsolete -> sys_pselect7 */
+#define __NR_select 82 /* obsolete -> sys_pselect6 */
#define __NR_symlink 83 /* symlinkat */
#define __NR_oldlstat 84 /* remove */
#define __NR_readlink 85 /* obsolete -> sys_readlinkat */
#define __NR_readlinkat 305 /* ok */
#define __NR_fchmodat 306 /* ok */
#define __NR_faccessat 307 /* ok */
-#define __NR_pselect6 308 /* obsolete -> sys_pselect7 */
+#define __NR_pselect6 308 /* ok */
#define __NR_ppoll 309 /* ok */
#define __NR_unshare 310 /* ok */
#define __NR_set_robust_list 311 /* ok */
#define __NR_process_vm_writev 378
#define __NR_kcmp 379
#define __NR_finit_module 380
+#define __NR_sched_setattr 381
+#define __NR_sched_getattr 382
#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
obj-y += dma.o exceptions.o \
hw_exception_handler.o intc.o irq.o \
- process.o prom.o prom_parse.o ptrace.o \
+ platform.o process.o prom.o prom_parse.o ptrace.o \
reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
obj-y += cpu/
static unsigned int base_addr;
-void heartbeat(void)
+void microblaze_heartbeat(void)
{
static unsigned int cnt, period, dist;
}
}
-void setup_heartbeat(void)
+void microblaze_setup_heartbeat(void)
{
struct device_node *gpio = NULL;
int *prop;
#define MER_ME (1<<0)
#define MER_HIE (1<<1)
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void intc_write32(u32 val, void __iomem *addr)
+{
+ iowrite32(val, addr);
+}
+
+static unsigned int intc_read32(void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
+static void intc_write32_be(u32 val, void __iomem *addr)
+{
+ iowrite32be(val, addr);
+}
+
+static unsigned int intc_read32_be(void __iomem *addr)
+{
+ return ioread32be(addr);
+}
+
static void intc_enable_or_unmask(struct irq_data *d)
{
unsigned long mask = 1 << d->hwirq;
* acks the irq before calling the interrupt handler
*/
if (irqd_is_level_type(d))
- out_be32(intc_baseaddr + IAR, mask);
+ write_fn(mask, intc_baseaddr + IAR);
- out_be32(intc_baseaddr + SIE, mask);
+ write_fn(mask, intc_baseaddr + SIE);
}
static void intc_disable_or_mask(struct irq_data *d)
{
pr_debug("disable: %ld\n", d->hwirq);
- out_be32(intc_baseaddr + CIE, 1 << d->hwirq);
+ write_fn(1 << d->hwirq, intc_baseaddr + CIE);
}
static void intc_ack(struct irq_data *d)
{
pr_debug("ack: %ld\n", d->hwirq);
- out_be32(intc_baseaddr + IAR, 1 << d->hwirq);
+ write_fn(1 << d->hwirq, intc_baseaddr + IAR);
}
static void intc_mask_ack(struct irq_data *d)
unsigned long mask = 1 << d->hwirq;
pr_debug("disable_and_ack: %ld\n", d->hwirq);
- out_be32(intc_baseaddr + CIE, mask);
- out_be32(intc_baseaddr + IAR, mask);
+ write_fn(mask, intc_baseaddr + CIE);
+ write_fn(mask, intc_baseaddr + IAR);
}
static struct irq_chip intc_dev = {
{
unsigned int hwirq, irq = -1;
- hwirq = in_be32(intc_baseaddr + IVR);
+ hwirq = read_fn(intc_baseaddr + IVR);
if (hwirq != -1U)
irq = irq_find_mapping(root_domain, hwirq);
pr_info("%s: num_irq=%d, edge=0x%x\n",
intc->full_name, nr_irq, intr_mask);
+ write_fn = intc_write32;
+ read_fn = intc_read32;
+
/*
* Disable all external interrupts until they are
* explicity requested.
*/
- out_be32(intc_baseaddr + IER, 0);
+ write_fn(0, intc_baseaddr + IER);
/* Acknowledge any pending interrupts just in case. */
- out_be32(intc_baseaddr + IAR, 0xffffffff);
+ write_fn(0xffffffff, intc_baseaddr + IAR);
/* Turn on the Master Enable. */
- out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
+ write_fn(MER_HIE | MER_ME, intc_baseaddr + MER);
+ if (!(read_fn(intc_baseaddr + MER) & (MER_HIE | MER_ME))) {
+ write_fn = intc_write32_be;
+ read_fn = intc_read32_be;
+ write_fn(MER_HIE | MER_ME, intc_baseaddr + MER);
+ }
/* Yeah, okay, casting the intr_mask to a void* is butt-ugly, but I'm
* lazy and Michal can clean it up to something nicer when he tests
--- /dev/null
+/*
+ * Copyright 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * based on virtex.c file
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/prom.h>
+#include <asm/setup.h>
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "xlnx,compound", },
+ {}
+};
+
+static int __init microblaze_device_probe(void)
+{
+ of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+ of_platform_reset_gpio_probe();
+ return 0;
+}
+device_initcall(microblaze_device_probe);
* for more details.
*/
+#include <linux/cpu.h>
#include <linux/export.h>
#include <linux/sched.h>
#include <linux/pm.h>
/* MS: I need add offset in page */
address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
/* MS address is virtual */
- address = virt_to_phys(address);
+ address = __virt_to_phys(address);
invalidate_icache_range(address, address + 8);
flush_dcache_range(address, address + 8);
}
.long sys_readlinkat /* 305 */
.long sys_fchmodat
.long sys_faccessat
- .long sys_ni_syscall /* pselect6 */
+ .long sys_pselect6
.long sys_ppoll
.long sys_unshare /* 310 */
.long sys_set_robust_list
.long sys_sendmsg /* 360 */
.long sys_recvmsg
.long sys_accept4
- .long sys_ni_syscall
- .long sys_ni_syscall
+ .long sys_preadv
+ .long sys_pwritev
.long sys_rt_tgsigqueueinfo /* 365 */
.long sys_perf_event_open
.long sys_recvmmsg
.long sys_process_vm_writev
.long sys_kcmp
.long sys_finit_module
+ .long sys_sched_setattr
+ .long sys_sched_getattr
#define TCSR_PWMA (1<<9)
#define TCSR_ENALL (1<<10)
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void timer_write32(u32 val, void __iomem *addr)
+{
+ iowrite32(val, addr);
+}
+
+static unsigned int timer_read32(void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
+static void timer_write32_be(u32 val, void __iomem *addr)
+{
+ iowrite32be(val, addr);
+}
+
+static unsigned int timer_read32_be(void __iomem *addr)
+{
+ return ioread32be(addr);
+}
+
static inline void xilinx_timer0_stop(void)
{
- out_be32(timer_baseaddr + TCSR0,
- in_be32(timer_baseaddr + TCSR0) & ~TCSR_ENT);
+ write_fn(read_fn(timer_baseaddr + TCSR0) & ~TCSR_ENT,
+ timer_baseaddr + TCSR0);
}
static inline void xilinx_timer0_start_periodic(unsigned long load_val)
if (!load_val)
load_val = 1;
/* loading value to timer reg */
- out_be32(timer_baseaddr + TLR0, load_val);
+ write_fn(load_val, timer_baseaddr + TLR0);
/* load the initial value */
- out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
+ write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
/* see timer data sheet for detail
* !ENALL - don't enable 'em all
* UDT - set the timer as down counter
* !MDT0 - generate mode
*/
- out_be32(timer_baseaddr + TCSR0,
- TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+ write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+ timer_baseaddr + TCSR0);
}
static inline void xilinx_timer0_start_oneshot(unsigned long load_val)
if (!load_val)
load_val = 1;
/* loading value to timer reg */
- out_be32(timer_baseaddr + TLR0, load_val);
+ write_fn(load_val, timer_baseaddr + TLR0);
/* load the initial value */
- out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
+ write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
- out_be32(timer_baseaddr + TCSR0,
- TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+ write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+ timer_baseaddr + TCSR0);
}
static int xilinx_timer_set_next_event(unsigned long delta,
static inline void timer_ack(void)
{
- out_be32(timer_baseaddr + TCSR0, in_be32(timer_baseaddr + TCSR0));
+ write_fn(read_fn(timer_baseaddr + TCSR0), timer_baseaddr + TCSR0);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_xilinx_timer;
#ifdef CONFIG_HEART_BEAT
- heartbeat();
+ microblaze_heartbeat();
#endif
timer_ack();
evt->event_handler(evt);
static u64 xilinx_clock_read(void)
{
- return in_be32(timer_baseaddr + TCR1);
+ return read_fn(timer_baseaddr + TCR1);
}
static cycle_t xilinx_read(struct clocksource *cs)
panic("failed to register clocksource");
/* stop timer1 */
- out_be32(timer_baseaddr + TCSR1,
- in_be32(timer_baseaddr + TCSR1) & ~TCSR_ENT);
+ write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT,
+ timer_baseaddr + TCSR1);
/* start timer1 - up counting without interrupt */
- out_be32(timer_baseaddr + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
+ write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1);
/* register timecounter - for ftrace support */
init_xilinx_timecounter();
BUG();
}
+ write_fn = timer_write32;
+ read_fn = timer_read32;
+
+ write_fn(TCSR_MDT, timer_baseaddr + TCSR0);
+ if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) {
+ write_fn = timer_write32_be;
+ read_fn = timer_read32_be;
+ }
+
irq = irq_of_parse_and_map(timer, 0);
of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num);
setup_irq(irq, &timer_irqaction);
#ifdef CONFIG_HEART_BEAT
- setup_heartbeat();
+ microblaze_setup_heartbeat();
#endif
xilinx_clocksource_init();
xilinx_clockevent_init();
ret = (void *)va;
/* This gives us the real physical address of the first page. */
- *dma_handle = pa = virt_to_bus((void *)vaddr);
+ *dma_handle = pa = __virt_to_phys(vaddr);
#endif
/*
if (initrd_start) {
unsigned long size;
size = initrd_end - initrd_start;
- memblock_reserve(virt_to_phys(initrd_start), size);
+ memblock_reserve(__virt_to_phys(initrd_start), size);
}
#endif /* CONFIG_BLK_DEV_INITRD */
*
* However, allow remap of rootfs: TBD
*/
+
if (mem_init_done &&
p >= memory_start && p < virt_to_phys(high_memory) &&
- !(p >= virt_to_phys((unsigned long)&__bss_stop) &&
- p < virt_to_phys((unsigned long)__bss_stop))) {
+ !(p >= __virt_to_phys((phys_addr_t)__bss_stop) &&
+ p < __virt_to_phys((phys_addr_t)__bss_stop))) {
pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %pf\n",
(unsigned long)p, __builtin_return_address(0));
return NULL;
+++ /dev/null
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-# Platform selection Kconfig menu for MicroBlaze targets
-#
-
-menu "Platform options"
-choice
- prompt "Platform"
- default PLATFORM_MICROBLAZE_AUTO
- help
- Choose which hardware board/platform you are targeting.
-
-config PLATFORM_GENERIC
- bool "Generic"
- help
- Choose this option for the Generic platform.
-
-endchoice
-
-config OPT_LIB_FUNCTION
- bool "Optimalized lib function"
- default y
- help
- Allows turn on optimalized library function (memcpy and memmove).
- They are optimized by using word alignment. This will work
- fine if both source and destination are aligned on the same
- boundary. However, if they are aligned on different boundaries
- shifts will be necessary. This might result in bad performance
- on MicroBlaze systems without a barrel shifter.
-
-config OPT_LIB_ASM
- bool "Optimalized lib function ASM"
- depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
- default n
- help
- Allows turn on optimalized library function (memcpy and memmove).
- Function are written in asm code.
-
-if PLATFORM_GENERIC=y
- source "arch/microblaze/platform/generic/Kconfig.auto"
-endif
-
-endmenu
+++ /dev/null
-#
-# Makefile for arch/microblaze/platform directory
-#
-#obj-$(CONFIG_PLATFORM_GENERIC) += generic/
-
-obj-y += platform.o
+++ /dev/null
-#
-# (C) Copyright 2007 Michal Simek
-#
-# Michal SIMEK <monstr@monstr.eu>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Definitions for MICROBLAZE0
-comment "Definitions for MICROBLAZE0"
-
-config KERNEL_BASE_ADDR
- hex "Physical address where Linux Kernel is"
- default "0x90000000"
- help
- BASE Address for kernel
-
-config XILINX_MICROBLAZE0_FAMILY
- string "Targeted FPGA family"
- default "virtex5"
-
-config XILINX_MICROBLAZE0_USE_MSR_INSTR
- int "USE_MSR_INSTR range (0:1)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_PCMP_INSTR
- int "USE_PCMP_INSTR range (0:1)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_BARREL
- int "USE_BARREL range (0:1)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_DIV
- int "USE_DIV range (0:1)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_HW_MUL
- int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
- default 0
-
-config XILINX_MICROBLAZE0_USE_FPU
- int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
- default 0
-
-config XILINX_MICROBLAZE0_HW_VER
- string "Core version number"
- default 7.10.d
+++ /dev/null
-#
-# Empty Makefile to keep make clean happy
-#
+++ /dev/null
-/*
- * Device Tree Generator version: 1.1
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
- */
-
-/dts-v1/;
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,microblaze";
- hard-reset-gpios = <&LEDs_8Bit 2 1>;
- model = "testing";
- DDR2_SDRAM: memory@90000000 {
- device_type = "memory";
- reg = < 0x90000000 0x10000000 >;
- } ;
- aliases {
- ethernet0 = &Hard_Ethernet_MAC;
- serial0 = &RS232_Uart_1;
- } ;
- chosen {
- bootargs = "console=ttyUL0,115200 highres=on";
- linux,stdout-path = "/plb@0/serial@84000000";
- } ;
- cpus {
- #address-cells = <1>;
- #cpus = <0x1>;
- #size-cells = <0>;
- microblaze_0: cpu@0 {
- clock-frequency = <125000000>;
- compatible = "xlnx,microblaze-7.10.d";
- d-cache-baseaddr = <0x90000000>;
- d-cache-highaddr = <0x9fffffff>;
- d-cache-line-size = <0x10>;
- d-cache-size = <0x2000>;
- device_type = "cpu";
- i-cache-baseaddr = <0x90000000>;
- i-cache-highaddr = <0x9fffffff>;
- i-cache-line-size = <0x10>;
- i-cache-size = <0x2000>;
- model = "microblaze,7.10.d";
- reg = <0>;
- timebase-frequency = <125000000>;
- xlnx,addr-tag-bits = <0xf>;
- xlnx,allow-dcache-wr = <0x1>;
- xlnx,allow-icache-wr = <0x1>;
- xlnx,area-optimized = <0x0>;
- xlnx,cache-byte-size = <0x2000>;
- xlnx,d-lmb = <0x1>;
- xlnx,d-opb = <0x0>;
- xlnx,d-plb = <0x1>;
- xlnx,data-size = <0x20>;
- xlnx,dcache-addr-tag = <0xf>;
- xlnx,dcache-always-used = <0x1>;
- xlnx,dcache-byte-size = <0x2000>;
- xlnx,dcache-line-len = <0x4>;
- xlnx,dcache-use-fsl = <0x1>;
- xlnx,debug-enabled = <0x1>;
- xlnx,div-zero-exception = <0x1>;
- xlnx,dopb-bus-exception = <0x0>;
- xlnx,dynamic-bus-sizing = <0x1>;
- xlnx,edge-is-positive = <0x1>;
- xlnx,family = "virtex5";
- xlnx,endianness = <0x1>;
- xlnx,fpu-exception = <0x1>;
- xlnx,fsl-data-size = <0x20>;
- xlnx,fsl-exception = <0x0>;
- xlnx,fsl-links = <0x0>;
- xlnx,i-lmb = <0x1>;
- xlnx,i-opb = <0x0>;
- xlnx,i-plb = <0x1>;
- xlnx,icache-always-used = <0x1>;
- xlnx,icache-line-len = <0x4>;
- xlnx,icache-use-fsl = <0x1>;
- xlnx,ill-opcode-exception = <0x1>;
- xlnx,instance = "microblaze_0";
- xlnx,interconnect = <0x1>;
- xlnx,interrupt-is-edge = <0x0>;
- xlnx,iopb-bus-exception = <0x0>;
- xlnx,mmu-dtlb-size = <0x4>;
- xlnx,mmu-itlb-size = <0x2>;
- xlnx,mmu-tlb-access = <0x3>;
- xlnx,mmu-zones = <0x10>;
- xlnx,number-of-pc-brk = <0x1>;
- xlnx,number-of-rd-addr-brk = <0x0>;
- xlnx,number-of-wr-addr-brk = <0x0>;
- xlnx,opcode-0x0-illegal = <0x1>;
- xlnx,pvr = <0x2>;
- xlnx,pvr-user1 = <0x0>;
- xlnx,pvr-user2 = <0x0>;
- xlnx,reset-msr = <0x0>;
- xlnx,sco = <0x0>;
- xlnx,unaligned-exceptions = <0x1>;
- xlnx,use-barrel = <0x1>;
- xlnx,use-dcache = <0x1>;
- xlnx,use-div = <0x1>;
- xlnx,use-ext-brk = <0x1>;
- xlnx,use-ext-nm-brk = <0x1>;
- xlnx,use-extended-fsl-instr = <0x0>;
- xlnx,use-fpu = <0x2>;
- xlnx,use-hw-mul = <0x2>;
- xlnx,use-icache = <0x1>;
- xlnx,use-interrupt = <0x1>;
- xlnx,use-mmu = <0x3>;
- xlnx,use-msr-instr = <0x1>;
- xlnx,use-pcmp-instr = <0x1>;
- } ;
- } ;
- mb_plb: plb@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
- ranges ;
- FLASH: flash@a0000000 {
- bank-width = <2>;
- compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
- reg = < 0xa0000000 0x2000000 >;
- xlnx,family = "virtex5";
- xlnx,include-datawidth-matching-0 = <0x1>;
- xlnx,include-datawidth-matching-1 = <0x0>;
- xlnx,include-datawidth-matching-2 = <0x0>;
- xlnx,include-datawidth-matching-3 = <0x0>;
- xlnx,include-negedge-ioregs = <0x0>;
- xlnx,include-plb-ipif = <0x1>;
- xlnx,include-wrbuf = <0x1>;
- xlnx,max-mem-width = <0x10>;
- xlnx,mch-native-dwidth = <0x20>;
- xlnx,mch-plb-clk-period-ps = <0x1f40>;
- xlnx,mch-splb-awidth = <0x20>;
- xlnx,mch0-accessbuf-depth = <0x10>;
- xlnx,mch0-protocol = <0x0>;
- xlnx,mch0-rddatabuf-depth = <0x10>;
- xlnx,mch1-accessbuf-depth = <0x10>;
- xlnx,mch1-protocol = <0x0>;
- xlnx,mch1-rddatabuf-depth = <0x10>;
- xlnx,mch2-accessbuf-depth = <0x10>;
- xlnx,mch2-protocol = <0x0>;
- xlnx,mch2-rddatabuf-depth = <0x10>;
- xlnx,mch3-accessbuf-depth = <0x10>;
- xlnx,mch3-protocol = <0x0>;
- xlnx,mch3-rddatabuf-depth = <0x10>;
- xlnx,mem0-width = <0x10>;
- xlnx,mem1-width = <0x20>;
- xlnx,mem2-width = <0x20>;
- xlnx,mem3-width = <0x20>;
- xlnx,num-banks-mem = <0x1>;
- xlnx,num-channels = <0x0>;
- xlnx,priority-mode = <0x0>;
- xlnx,synch-mem-0 = <0x0>;
- xlnx,synch-mem-1 = <0x0>;
- xlnx,synch-mem-2 = <0x0>;
- xlnx,synch-mem-3 = <0x0>;
- xlnx,synch-pipedelay-0 = <0x2>;
- xlnx,synch-pipedelay-1 = <0x2>;
- xlnx,synch-pipedelay-2 = <0x2>;
- xlnx,synch-pipedelay-3 = <0x2>;
- xlnx,tavdv-ps-mem-0 = <0x1adb0>;
- xlnx,tavdv-ps-mem-1 = <0x3a98>;
- xlnx,tavdv-ps-mem-2 = <0x3a98>;
- xlnx,tavdv-ps-mem-3 = <0x3a98>;
- xlnx,tcedv-ps-mem-0 = <0x1adb0>;
- xlnx,tcedv-ps-mem-1 = <0x3a98>;
- xlnx,tcedv-ps-mem-2 = <0x3a98>;
- xlnx,tcedv-ps-mem-3 = <0x3a98>;
- xlnx,thzce-ps-mem-0 = <0x88b8>;
- xlnx,thzce-ps-mem-1 = <0x1b58>;
- xlnx,thzce-ps-mem-2 = <0x1b58>;
- xlnx,thzce-ps-mem-3 = <0x1b58>;
- xlnx,thzoe-ps-mem-0 = <0x1b58>;
- xlnx,thzoe-ps-mem-1 = <0x1b58>;
- xlnx,thzoe-ps-mem-2 = <0x1b58>;
- xlnx,thzoe-ps-mem-3 = <0x1b58>;
- xlnx,tlzwe-ps-mem-0 = <0x88b8>;
- xlnx,tlzwe-ps-mem-1 = <0x0>;
- xlnx,tlzwe-ps-mem-2 = <0x0>;
- xlnx,tlzwe-ps-mem-3 = <0x0>;
- xlnx,twc-ps-mem-0 = <0x2af8>;
- xlnx,twc-ps-mem-1 = <0x3a98>;
- xlnx,twc-ps-mem-2 = <0x3a98>;
- xlnx,twc-ps-mem-3 = <0x3a98>;
- xlnx,twp-ps-mem-0 = <0x11170>;
- xlnx,twp-ps-mem-1 = <0x2ee0>;
- xlnx,twp-ps-mem-2 = <0x2ee0>;
- xlnx,twp-ps-mem-3 = <0x2ee0>;
- xlnx,xcl0-linesize = <0x4>;
- xlnx,xcl0-writexfer = <0x1>;
- xlnx,xcl1-linesize = <0x4>;
- xlnx,xcl1-writexfer = <0x1>;
- xlnx,xcl2-linesize = <0x4>;
- xlnx,xcl2-writexfer = <0x1>;
- xlnx,xcl3-linesize = <0x4>;
- xlnx,xcl3-writexfer = <0x1>;
- } ;
- Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,compound";
- ranges ;
- ethernet@81c00000 {
- compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
- interrupt-parent = <&xps_intc_0>;
- interrupts = < 5 2 >;
- llink-connected = <&PIM3>;
- local-mac-address = [ 00 0a 35 00 00 00 ];
- reg = < 0x81c00000 0x40 >;
- xlnx,bus2core-clk-ratio = <0x1>;
- xlnx,phy-type = <0x1>;
- xlnx,phyaddr = <0x1>;
- xlnx,rxcsum = <0x0>;
- xlnx,rxfifo = <0x1000>;
- xlnx,temac-type = <0x0>;
- xlnx,txcsum = <0x0>;
- xlnx,txfifo = <0x1000>;
- } ;
- } ;
- IIC_EEPROM: i2c@81600000 {
- compatible = "xlnx,xps-iic-2.00.a";
- interrupt-parent = <&xps_intc_0>;
- interrupts = < 6 2 >;
- reg = < 0x81600000 0x10000 >;
- xlnx,clk-freq = <0x7735940>;
- xlnx,family = "virtex5";
- xlnx,gpo-width = <0x1>;
- xlnx,iic-freq = <0x186a0>;
- xlnx,scl-inertial-delay = <0x0>;
- xlnx,sda-inertial-delay = <0x0>;
- xlnx,ten-bit-adr = <0x0>;
- } ;
- LEDs_8Bit: gpio@81400000 {
- compatible = "xlnx,xps-gpio-1.00.a";
- interrupt-parent = <&xps_intc_0>;
- interrupts = < 7 2 >;
- reg = < 0x81400000 0x10000 >;
- xlnx,all-inputs = <0x0>;
- xlnx,all-inputs-2 = <0x0>;
- xlnx,dout-default = <0x0>;
- xlnx,dout-default-2 = <0x0>;
- xlnx,family = "virtex5";
- xlnx,gpio-width = <0x8>;
- xlnx,interrupt-present = <0x1>;
- xlnx,is-bidir = <0x1>;
- xlnx,is-bidir-2 = <0x1>;
- xlnx,is-dual = <0x0>;
- xlnx,tri-default = <0xffffffff>;
- xlnx,tri-default-2 = <0xffffffff>;
- #gpio-cells = <2>;
- gpio-controller;
- } ;
-
- gpio-leds {
- compatible = "gpio-leds";
-
- heartbeat {
- label = "Heartbeat";
- gpios = <&LEDs_8Bit 4 1>;
- linux,default-trigger = "heartbeat";
- };
-
- yellow {
- label = "Yellow";
- gpios = <&LEDs_8Bit 5 1>;
- };
-
- red {
- label = "Red";
- gpios = <&LEDs_8Bit 6 1>;
- };
-
- green {
- label = "Green";
- gpios = <&LEDs_8Bit 7 1>;
- };
- } ;
- RS232_Uart_1: serial@84000000 {
- clock-frequency = <125000000>;
- compatible = "xlnx,xps-uartlite-1.00.a";
- current-speed = <115200>;
- device_type = "serial";
- interrupt-parent = <&xps_intc_0>;
- interrupts = < 8 0 >;
- port-number = <0>;
- reg = < 0x84000000 0x10000 >;
- xlnx,baudrate = <0x1c200>;
- xlnx,data-bits = <0x8>;
- xlnx,family = "virtex5";
- xlnx,odd-parity = <0x0>;
- xlnx,use-parity = <0x0>;
- } ;
- SysACE_CompactFlash: sysace@83600000 {
- compatible = "xlnx,xps-sysace-1.00.a";
- interrupt-parent = <&xps_intc_0>;
- interrupts = < 4 2 >;
- reg = < 0x83600000 0x10000 >;
- xlnx,family = "virtex5";
- xlnx,mem-width = <0x10>;
- } ;
- debug_module: debug@84400000 {
- compatible = "xlnx,mdm-1.00.d";
- reg = < 0x84400000 0x10000 >;
- xlnx,family = "virtex5";
- xlnx,interconnect = <0x1>;
- xlnx,jtag-chain = <0x2>;
- xlnx,mb-dbg-ports = <0x1>;
- xlnx,uart-width = <0x8>;
- xlnx,use-uart = <0x1>;
- xlnx,write-fsl-ports = <0x0>;
- } ;
- mpmc@90000000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "xlnx,mpmc-4.02.a";
- ranges ;
- PIM3: sdma@84600180 {
- compatible = "xlnx,ll-dma-1.00.a";
- interrupt-parent = <&xps_intc_0>;
- interrupts = < 2 2 1 2 >;
- reg = < 0x84600180 0x80 >;
- } ;
- } ;
- xps_intc_0: interrupt-controller@81800000 {
- #interrupt-cells = <0x2>;
- compatible = "xlnx,xps-intc-1.00.a";
- interrupt-controller ;
- reg = < 0x81800000 0x10000 >;
- xlnx,kind-of-intr = <0x100>;
- xlnx,num-intr-inputs = <0x9>;
- } ;
- xps_timer_1: timer@83c00000 {
- compatible = "xlnx,xps-timer-1.00.a";
- interrupt-parent = <&xps_intc_0>;
- interrupts = < 3 2 >;
- reg = < 0x83c00000 0x10000 >;
- xlnx,count-width = <0x20>;
- xlnx,family = "virtex5";
- xlnx,gen0-assert = <0x1>;
- xlnx,gen1-assert = <0x1>;
- xlnx,one-timer-only = <0x0>;
- xlnx,trig0-assert = <0x1>;
- xlnx,trig1-assert = <0x1>;
- } ;
- } ;
-} ;
+++ /dev/null
-/*
- * Copyright 2008 Michal Simek <monstr@monstr.eu>
- *
- * based on virtex.c file
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/prom.h>
-#include <asm/setup.h>
-
-static struct of_device_id xilinx_of_bus_ids[] __initdata = {
- { .compatible = "simple-bus", },
- { .compatible = "xlnx,compound", },
- {}
-};
-
-static int __init microblaze_device_probe(void)
-{
- of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
- of_platform_reset_gpio_probe();
- return 0;
-}
-device_initcall(microblaze_device_probe);
#define __ASM_MIPS_SYSCALL_H
#include <linux/compiler.h>
-#include <linux/audit.h>
+#include <uapi/linux/audit.h>
#include <linux/elf-em.h>
#include <linux/kernel.h>
#include <linux/sched.h>
extern const unsigned long sys32_call_table[];
extern const unsigned long sysn32_call_table[];
-static inline int syscall_get_arch(struct task_struct *task,
- struct pt_regs *regs)
+static inline int syscall_get_arch(void)
{
int arch = EM_MIPS;
#ifdef CONFIG_64BIT
- if (!test_tsk_thread_flag(task, TIF_32BIT_REGS))
+ if (!test_thread_flag(TIF_32BIT_REGS))
arch |= __AUDIT_ARCH_64BIT;
#endif
#if defined(__LITTLE_ENDIAN)
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
trace_sys_enter(regs, regs->regs[2]);
- audit_syscall_entry(syscall_get_arch(current, regs),
+ audit_syscall_entry(syscall_get_arch(),
syscall,
regs->regs[4], regs->regs[5],
regs->regs[6], regs->regs[7]);
};
struct cpufreq_frequency_table loongson2_clockmod_table[] = {
- {DC_RESV, CPUFREQ_ENTRY_INVALID},
- {DC_ZERO, CPUFREQ_ENTRY_INVALID},
- {DC_25PT, 0},
- {DC_37PT, 0},
- {DC_50PT, 0},
- {DC_62PT, 0},
- {DC_75PT, 0},
- {DC_87PT, 0},
- {DC_DISABLE, 0},
- {DC_RESV, CPUFREQ_TABLE_END},
+ {0, DC_RESV, CPUFREQ_ENTRY_INVALID},
+ {0, DC_ZERO, CPUFREQ_ENTRY_INVALID},
+ {0, DC_25PT, 0},
+ {0, DC_37PT, 0},
+ {0, DC_50PT, 0},
+ {0, DC_62PT, 0},
+ {0, DC_75PT, 0},
+ {0, DC_87PT, 0},
+ {0, DC_DISABLE, 0},
+ {0, DC_RESV, CPUFREQ_TABLE_END},
};
EXPORT_SYMBOL_GPL(loongson2_clockmod_table);
* be used in IRQ contexts, so in some (very limited) cases we need
* it.
*/
-static inline unsigned long kmap_atomic(struct page *page)
+static inline void *kmap_atomic(struct page *page)
{
unsigned long vaddr;
int idx, type;
set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
local_flush_tlb_one(vaddr);
- return vaddr;
+ return (void *)vaddr;
}
static inline void __kunmap_atomic(unsigned long vaddr)
select CLONE_BACKWARDS
select TTY # Needed for pdc_cons.c
select HAVE_DEBUG_STACKOVERFLOW
+ select HAVE_ARCH_AUDITSYSCALL
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select ARCH_USE_CMPXCHG_LOCKREF if PPC64
+ select HAVE_ARCH_AUDITSYSCALL
config GENERIC_CSUM
def_bool CPU_LITTLE_ENDIAN
LDEMULATION := lppc
GNUTARGET := powerpcle
MULTIPLEWORD := -mno-multiple
+KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-save-toc-indirect)
else
ifeq ($(call cc-option-yn,-mbig-endian),y)
override CC += -mbig-endian
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_KVM_BOOK3S_64_HV=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_NX=y
CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
#ifdef CONFIG_PPC64
struct ppc_emulated_entry mfdscr;
struct ppc_emulated_entry mtdscr;
+ struct ppc_emulated_entry lq_stq;
#endif
} ppc_emulated;
#define OPAL_ASYNC_COMPLETION -15
/* API Tokens (in r0) */
+#define OPAL_INVALID_CALL -1
#define OPAL_CONSOLE_WRITE 1
#define OPAL_CONSOLE_READ 2
#define OPAL_RTC_READ 3
#ifndef __ASSEMBLY__
+#include <linux/notifier.h>
+
/* Other enums */
enum OpalVendorApiTokens {
OPAL_START_VENDOR_API_RANGE = 1000, OPAL_END_VENDOR_API_RANGE = 1999
};
struct opal_msg {
- uint32_t msg_type;
- uint32_t reserved;
- uint64_t params[8];
+ __be32 msg_type;
+ __be32 reserved;
+ __be64 params[8];
};
struct opal_machine_check_event {
/* /sys/firmware/opal */
extern struct kobject *opal_kobj;
+/* /ibm,opal */
+extern struct device_node *opal_node;
+
/* API functions */
+int64_t opal_invalid_call(void);
int64_t opal_console_write(int64_t term_number, __be64 *length,
const uint8_t *buffer);
int64_t opal_console_read(int64_t term_number, __be64 *length,
size_t length);
int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
size_t length);
-int64_t opal_sensor_read(uint32_t sensor_hndl, int token,
- uint32_t *sensor_data);
+int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
int depth, void *data);
extern int opal_notifier_register(struct notifier_block *nb);
+extern int opal_notifier_unregister(struct notifier_block *nb);
+
extern int opal_message_notifier_register(enum OpalMessageType msg_type,
struct notifier_block *nb);
extern void opal_notifier_enable(void);
extern int opal_elog_init(void);
extern void opal_platform_dump_init(void);
extern void opal_sys_param_init(void);
+extern void opal_msglog_init(void);
extern int opal_machine_check(struct pt_regs *regs);
extern bool opal_mce_check_early_recovery(struct pt_regs *regs);
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
#define SPRN_IC 0x350 /* Virtual Instruction Count */
#define SPRN_VTB 0x351 /* Virtual Time Base */
+#define SPRN_PMICR 0x354 /* Power Management Idle Control Reg */
+#define SPRN_PMSR 0x355 /* Power Management Status Reg */
+#define SPRN_PMCR 0x374 /* Power Management Control Register */
+
/* HFSCR and FSCR bit numbers are the same */
#define FSCR_TAR_LG 8 /* Enable Target Address Register */
#define FSCR_EBB_LG 7 /* Enable Event Based Branching */
#define RTAS_VECTOR_EXTERNAL_INTERRUPT 0x500
struct rtas_error_log {
- unsigned long version:8; /* Architectural version */
- unsigned long severity:3; /* Severity level of error */
- unsigned long disposition:2; /* Degree of recovery */
- unsigned long extended:1; /* extended log present? */
- unsigned long /* reserved */ :2; /* Reserved for future use */
- unsigned long initiator:4; /* Initiator of event */
- unsigned long target:4; /* Target of failed operation */
- unsigned long type:8; /* General event or error*/
- unsigned long extended_log_length:32; /* length in bytes */
- unsigned char buffer[1]; /* Start of extended log */
+ /* Byte 0 */
+ uint8_t byte0; /* Architectural version */
+
+ /* Byte 1 */
+ uint8_t byte1;
+ /* XXXXXXXX
+ * XXX 3: Severity level of error
+ * XX 2: Degree of recovery
+ * X 1: Extended log present?
+ * XX 2: Reserved
+ */
+
+ /* Byte 2 */
+ uint8_t byte2;
+ /* XXXXXXXX
+ * XXXX 4: Initiator of event
+ * XXXX 4: Target of failed operation
+ */
+ uint8_t byte3; /* General event or error*/
+ __be32 extended_log_length; /* length in bytes */
+ unsigned char buffer[1]; /* Start of extended log */
/* Variable length. */
};
+static inline uint8_t rtas_error_severity(const struct rtas_error_log *elog)
+{
+ return (elog->byte1 & 0xE0) >> 5;
+}
+
+static inline uint8_t rtas_error_disposition(const struct rtas_error_log *elog)
+{
+ return (elog->byte1 & 0x18) >> 3;
+}
+
+static inline uint8_t rtas_error_extended(const struct rtas_error_log *elog)
+{
+ return (elog->byte1 & 0x04) >> 2;
+}
+
+#define rtas_error_type(x) ((x)->byte3)
+
+static inline
+uint32_t rtas_error_extended_log_length(const struct rtas_error_log *elog)
+{
+ return be32_to_cpu(elog->extended_log_length);
+}
+
#define RTAS_V6EXT_LOG_FORMAT_EVENT_LOG 14
#define RTAS_V6EXT_COMPANY_ID_IBM (('I' << 24) | ('B' << 16) | ('M' << 8))
*/
struct rtas_ext_event_log_v6 {
/* Byte 0 */
- uint32_t log_valid:1; /* 1:Log valid */
- uint32_t unrecoverable_error:1; /* 1:Unrecoverable error */
- uint32_t recoverable_error:1; /* 1:recoverable (correctable */
- /* or successfully retried) */
- uint32_t degraded_operation:1; /* 1:Unrecoverable err, bypassed*/
- /* - degraded operation (e.g. */
- /* CPU or mem taken off-line) */
- uint32_t predictive_error:1;
- uint32_t new_log:1; /* 1:"New" log (Always 1 for */
- /* data returned from RTAS */
- uint32_t big_endian:1; /* 1: Big endian */
- uint32_t :1; /* reserved */
+ uint8_t byte0;
+ /* XXXXXXXX
+ * X 1: Log valid
+ * X 1: Unrecoverable error
+ * X 1: Recoverable (correctable or successfully retried)
+ * X 1: Bypassed unrecoverable error (degraded operation)
+ * X 1: Predictive error
+ * X 1: "New" log (always 1 for data returned from RTAS)
+ * X 1: Big Endian
+ * X 1: Reserved
+ */
+
/* Byte 1 */
- uint32_t :8; /* reserved */
+ uint8_t byte1; /* reserved */
+
/* Byte 2 */
- uint32_t powerpc_format:1; /* Set to 1 (indicating log is */
- /* in PowerPC format */
- uint32_t :3; /* reserved */
- uint32_t log_format:4; /* Log format indicator. Define */
- /* format used for byte 12-2047 */
+ uint8_t byte2;
+ /* XXXXXXXX
+ * X 1: Set to 1 (indicating log is in PowerPC format)
+ * XXX 3: Reserved
+ * XXXX 4: Log format used for bytes 12-2047
+ */
+
/* Byte 3 */
- uint32_t :8; /* reserved */
+ uint8_t byte3; /* reserved */
/* Byte 4-11 */
uint8_t reserved[8]; /* reserved */
/* Byte 12-15 */
- uint32_t company_id; /* Company ID of the company */
+ __be32 company_id; /* Company ID of the company */
/* that defines the format for */
/* the vendor specific log type */
/* Byte 16-end of log */
/* Variable length. */
};
+static
+inline uint8_t rtas_ext_event_log_format(struct rtas_ext_event_log_v6 *ext_log)
+{
+ return ext_log->byte2 & 0x0F;
+}
+
+static
+inline uint32_t rtas_ext_event_company_id(struct rtas_ext_event_log_v6 *ext_log)
+{
+ return be32_to_cpu(ext_log->company_id);
+}
+
/* pSeries event log format */
/* Two bytes ASCII section IDs */
/* Vendor specific Platform Event Log Format, Version 6, section header */
struct pseries_errorlog {
- uint16_t id; /* 0x00 2-byte ASCII section ID */
- uint16_t length; /* 0x02 Section length in bytes */
+ __be16 id; /* 0x00 2-byte ASCII section ID */
+ __be16 length; /* 0x02 Section length in bytes */
uint8_t version; /* 0x04 Section version */
uint8_t subtype; /* 0x05 Section subtype */
- uint16_t creator_component; /* 0x06 Creator component ID */
+ __be16 creator_component; /* 0x06 Creator component ID */
uint8_t data[]; /* 0x08 Start of section data */
};
+static
+inline uint16_t pseries_errorlog_id(struct pseries_errorlog *sect)
+{
+ return be16_to_cpu(sect->id);
+}
+
+static
+inline uint16_t pseries_errorlog_length(struct pseries_errorlog *sect)
+{
+ return be16_to_cpu(sect->length);
+}
+
struct pseries_errorlog *get_pseries_errorlog(struct rtas_error_log *log,
uint16_t section_id);
{ 8, LD+F }, /* 00 0 1001: lfd */
{ 4, ST+F+S }, /* 00 0 1010: stfs */
{ 8, ST+F }, /* 00 0 1011: stfd */
- INVALID, /* 00 0 1100 */
+ { 16, LD }, /* 00 0 1100: lq */
{ 8, LD }, /* 00 0 1101: ld/ldu/lwa */
INVALID, /* 00 0 1110 */
{ 8, ST }, /* 00 0 1111: std/stdu */
{ 2, LD+SW }, /* 10 0 1100: lhbrx */
{ 4, LD+SE }, /* 10 0 1101 lwa */
{ 2, ST+SW }, /* 10 0 1110: sthbrx */
- INVALID, /* 10 0 1111 */
+ { 16, ST }, /* 10 0 1111: stq */
INVALID, /* 10 1 0000 */
INVALID, /* 10 1 0001 */
INVALID, /* 10 1 0010 */
char *ptr1 = (char *) ¤t->thread.TS_FPR(reg+1);
int i, ret, sw = 0;
- if (!(flags & F))
- return 0;
if (reg & 1)
return 0; /* invalid form: FRS/FRT must be even */
if (flags & SW)
return 1; /* exception handled and fixed up */
}
+#ifdef CONFIG_PPC64
+static int emulate_lq_stq(struct pt_regs *regs, unsigned char __user *addr,
+ unsigned int reg, unsigned int flags)
+{
+ char *ptr0 = (char *)®s->gpr[reg];
+ char *ptr1 = (char *)®s->gpr[reg+1];
+ int i, ret, sw = 0;
+
+ if (reg & 1)
+ return 0; /* invalid form: GPR must be even */
+ if (flags & SW)
+ sw = 7;
+ ret = 0;
+ for (i = 0; i < 8; ++i) {
+ if (!(flags & ST)) {
+ ret |= __get_user(ptr0[i^sw], addr + i);
+ ret |= __get_user(ptr1[i^sw], addr + i + 8);
+ } else {
+ ret |= __put_user(ptr0[i^sw], addr + i);
+ ret |= __put_user(ptr1[i^sw], addr + i + 8);
+ }
+ }
+ if (ret)
+ return -EFAULT;
+ return 1; /* exception handled and fixed up */
+}
+#endif /* CONFIG_PPC64 */
+
#ifdef CONFIG_SPE
static struct aligninfo spe_aligninfo[32] = {
flush_fp_to_thread(current);
}
- /* Special case for 16-byte FP loads and stores */
- if (nb == 16) {
- PPC_WARN_ALIGNMENT(fp_pair, regs);
- return emulate_fp_pair(addr, reg, flags);
+ if ((nb == 16)) {
+ if (flags & F) {
+ /* Special case for 16-byte FP loads and stores */
+ PPC_WARN_ALIGNMENT(fp_pair, regs);
+ return emulate_fp_pair(addr, reg, flags);
+ } else {
+#ifdef CONFIG_PPC64
+ /* Special case for 16-byte loads and stores */
+ PPC_WARN_ALIGNMENT(lq_stq, regs);
+ return emulate_lq_stq(regs, addr, reg, flags);
+#else
+ return 0;
+#endif
+ }
}
PPC_WARN_ALIGNMENT(unaligned, regs);
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
- oris r3, r3, LPCR_AIL_3@h
bl __init_LPCR
bl __init_HFSCR
bl __init_tlb_power8
li r0,0
mtspr SPRN_LPID,r0
mfspr r3,SPRN_LPCR
- oris r3, r3, LPCR_AIL_3@h
bl __init_LPCR
bl __init_HFSCR
bl __init_tlb_power8
xori r12,r12,MSR_LE ; \
mtspr SPRN_SRR1,r12 ; \
rfid ; /* return to userspace */ \
- b . ; \
-2: mfspr r12,SPRN_SRR1 ; \
- andi. r12,r12,MSR_PR ; \
- bne 0b ; \
- mtspr SPRN_SRR0,r3 ; \
- mtspr SPRN_SRR1,r4 ; \
- mtspr SPRN_SDR1,r5 ; \
- rfid ; \
b . ; /* prevent speculative execution */
#if defined(CONFIG_RELOCATABLE)
new_paca->paca_index = cpu;
new_paca->kernel_toc = kernel_toc;
new_paca->kernelbase = (unsigned long) _stext;
- new_paca->kernel_msr = MSR_KERNEL;
+ /* Only set MSR:IR/DR when MMU is initialized */
+ new_paca->kernel_msr = MSR_KERNEL & ~(MSR_IR | MSR_DR);
new_paca->hw_cpu_id = 0xffff;
new_paca->kexec_state = KEXEC_STATE_NONE;
new_paca->__current = &init_task;
tm_save_sprs(thr);
}
+extern void __tm_recheckpoint(struct thread_struct *thread,
+ unsigned long orig_msr);
+
+void tm_recheckpoint(struct thread_struct *thread,
+ unsigned long orig_msr)
+{
+ unsigned long flags;
+
+ /* We really can't be interrupted here as the TEXASR registers can't
+ * change and later in the trecheckpoint code, we have a userspace R1.
+ * So let's hard disable over this region.
+ */
+ local_irq_save(flags);
+ hard_irq_disable();
+
+ /* The TM SPRs are restored here, so that TEXASR.FS can be set
+ * before the trecheckpoint and no explosion occurs.
+ */
+ tm_restore_sprs(thread);
+
+ __tm_recheckpoint(thread, orig_msr);
+
+ local_irq_restore(flags);
+}
+
static inline void tm_recheckpoint_new_task(struct task_struct *new)
{
unsigned long msr;
if (!new->thread.regs)
return;
- /* The TM SPRs are restored here, so that TEXASR.FS can be set
- * before the trecheckpoint and no explosion occurs.
- */
- tm_restore_sprs(&new->thread);
-
- if (!MSR_TM_ACTIVE(new->thread.regs->msr))
+ if (!MSR_TM_ACTIVE(new->thread.regs->msr)){
+ tm_restore_sprs(&new->thread);
return;
+ }
msr = new->thread.tm_orig_msr;
/* Recheckpoint to restore original checkpointed register state. */
TM_DEBUG("*** tm_recheckpoint of pid %d "
#endif
}
- if (found >= 0) {
- DBG("boot cpu: logical %d physical %d\n", found,
- be32_to_cpu(intserv[found_thread]));
- boot_cpuid = found;
- set_hard_smp_processor_id(found,
- be32_to_cpu(intserv[found_thread]));
+ /* Not the boot CPU */
+ if (found < 0)
+ return 0;
- /*
- * PAPR defines "logical" PVR values for cpus that
- * meet various levels of the architecture:
- * 0x0f000001 Architecture version 2.04
- * 0x0f000002 Architecture version 2.05
- * If the cpu-version property in the cpu node contains
- * such a value, we call identify_cpu again with the
- * logical PVR value in order to use the cpu feature
- * bits appropriate for the architecture level.
- *
- * A POWER6 partition in "POWER6 architected" mode
- * uses the 0x0f000002 PVR value; in POWER5+ mode
- * it uses 0x0f000001.
- */
- prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
- if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
- identify_cpu(0, be32_to_cpup(prop));
+ DBG("boot cpu: logical %d physical %d\n", found,
+ be32_to_cpu(intserv[found_thread]));
+ boot_cpuid = found;
+ set_hard_smp_processor_id(found, be32_to_cpu(intserv[found_thread]));
- identical_pvr_fixup(node);
- }
+ /*
+ * PAPR defines "logical" PVR values for cpus that
+ * meet various levels of the architecture:
+ * 0x0f000001 Architecture version 2.04
+ * 0x0f000002 Architecture version 2.05
+ * If the cpu-version property in the cpu node contains
+ * such a value, we call identify_cpu again with the
+ * logical PVR value in order to use the cpu feature
+ * bits appropriate for the architecture level.
+ *
+ * A POWER6 partition in "POWER6 architected" mode
+ * uses the 0x0f000002 PVR value; in POWER5+ mode
+ * it uses 0x0f000001.
+ */
+ prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
+ if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000)
+ identify_cpu(0, be32_to_cpup(prop));
+
+ identical_pvr_fixup(node);
check_cpu_feature_properties(node);
check_cpu_pa_features(node);
check_cpu_slb_size(node);
-#ifdef CONFIG_PPC_PSERIES
+#ifdef CONFIG_PPC64
if (nthreads > 1)
cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
else
cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
#endif
-
return 0;
}
* (altivec support, boot CPU ID, ...)
*/
of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
+ if (boot_cpuid < 0) {
+ printk("Failed to indentify boot CPU !\n");
+ BUG();
+ }
#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
/* We'll later wait for secondaries to check in; there are
(struct rtas_ext_event_log_v6 *)log->buffer;
struct pseries_errorlog *sect;
unsigned char *p, *log_end;
+ uint32_t ext_log_length = rtas_error_extended_log_length(log);
+ uint8_t log_format = rtas_ext_event_log_format(ext_log);
+ uint32_t company_id = rtas_ext_event_company_id(ext_log);
/* Check that we understand the format */
- if (log->extended_log_length < sizeof(struct rtas_ext_event_log_v6) ||
- ext_log->log_format != RTAS_V6EXT_LOG_FORMAT_EVENT_LOG ||
- ext_log->company_id != RTAS_V6EXT_COMPANY_ID_IBM)
+ if (ext_log_length < sizeof(struct rtas_ext_event_log_v6) ||
+ log_format != RTAS_V6EXT_LOG_FORMAT_EVENT_LOG ||
+ company_id != RTAS_V6EXT_COMPANY_ID_IBM)
return NULL;
- log_end = log->buffer + log->extended_log_length;
+ log_end = log->buffer + ext_log_length;
p = ext_log->vendor_log;
while (p < log_end) {
sect = (struct pseries_errorlog *)p;
- if (sect->id == section_id)
+ if (pseries_errorlog_id(sect) == section_id)
return sect;
- p += sect->length;
+ p += pseries_errorlog_length(sect);
}
return NULL;
struct rtas_error_log *errlog = (struct rtas_error_log *)buf;
printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n",
- error_log_cnt, rtas_event_type(errlog->type),
- errlog->severity);
+ error_log_cnt, rtas_event_type(rtas_error_type(errlog)),
+ rtas_error_severity(errlog));
}
}
{
int len;
struct rtas_error_log *err;
+ uint32_t extended_log_length;
/* rtas fixed header */
len = 8;
err = (struct rtas_error_log *)buf;
- if (err->extended && err->extended_log_length) {
+ extended_log_length = rtas_error_extended_log_length(err);
+ if (rtas_error_extended(err) && extended_log_length) {
/* extended header */
- len += err->extended_log_length;
+ len += extended_log_length;
}
if (rtas_error_log_max == 0)
static void handle_rtas_event(const struct rtas_error_log *log)
{
- if (log->type == RTAS_TYPE_PRRN) {
- /* For PRRN Events the extended log length is used to denote
- * the scope for calling rtas update-nodes.
- */
- if (prrn_is_enabled())
- prrn_schedule_update(log->extended_log_length);
- }
+ if (rtas_error_type(log) != RTAS_TYPE_PRRN || !prrn_is_enabled())
+ return;
- return;
+ /* For PRRN Events the extended log length is used to denote
+ * the scope for calling rtas update-nodes.
+ */
+ prrn_schedule_update(rtas_error_extended_log_length(log));
}
#else
struct machdep_calls *machine_id;
EXPORT_SYMBOL(machine_id);
+int boot_cpuid = -1;
+EXPORT_SYMBOL_GPL(boot_cpuid);
+
unsigned long klimit = (unsigned long) _end;
char cmd_line[COMMAND_LINE_SIZE];
extern void bootx_init(unsigned long r4, unsigned long phys);
-int boot_cpuid = -1;
-EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
EXPORT_SYMBOL_GPL(boot_cpuid_phys);
#define DBG(fmt...)
#endif
-int boot_cpuid = 0;
int spinning_secondaries;
u64 ppc64_pft_size;
get_paca()->data_offset = 0;
}
+static void cpu_ready_for_interrupts(void)
+{
+ /* Set IR and DR in PACA MSR */
+ get_paca()->kernel_msr = MSR_KERNEL;
+
+ /* Enable AIL if supported */
+ if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+ unsigned long lpcr = mfspr(SPRN_LPCR);
+ mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
+ }
+}
+
/*
* Early initialization entry point. This is called by head.S
* with MMU translation disabled. We rely on the "feature" of
/* Initialize the hash table or TLB handling */
early_init_mmu();
+ /*
+ * At this point, we can let interrupts switch to virtual mode
+ * (the MMU has been setup), so adjust the MSR in the PACA to
+ * have IR and DR set and enable AIL if it exists
+ */
+ cpu_ready_for_interrupts();
+
+ /* Reserve large chunks of memory for use by CMA for KVM */
kvm_cma_reserve();
/*
/* Initialize the hash table or TLB handling */
early_init_mmu_secondary();
+
+ /*
+ * At this point, we can let interrupts switch to virtual mode
+ * (the MMU has been setup), so adjust the MSR in the PACA to
+ * have IR and DR set.
+ */
+ cpu_ready_for_interrupts();
}
#endif /* CONFIG_SMP */
* transactional versions should be loaded.
*/
tm_enable();
+ /* Make sure the transaction is marked as failed */
+ current->thread.tm_texasr |= TEXASR_FS;
/* This loads the checkpointed FP/VEC state, if used */
tm_recheckpoint(¤t->thread, msr);
/* Get the top half of the MSR */
}
#endif
tm_enable();
+ /* Make sure the transaction is marked as failed */
+ current->thread.tm_texasr |= TEXASR_FS;
/* This loads the checkpointed FP/VEC state, if used */
tm_recheckpoint(¤t->thread, msr);
* Call with IRQs off, stacks get all out of sync for
* some periods in here!
*/
-_GLOBAL(tm_recheckpoint)
+_GLOBAL(__tm_recheckpoint)
mfcr r5
mflr r0
stw r5, 8(r1)
#ifdef CONFIG_PPC64
WARN_EMULATED_SETUP(mfdscr),
WARN_EMULATED_SETUP(mtdscr),
+ WARN_EMULATED_SETUP(lq_stq),
#endif
};
u32 mask;
u32 fpscr;
- if (FM == 0)
- return 0;
-
- if (FM == 0xff)
- mask = 0x9fffffff;
+ if (likely(FM == 1))
+ mask = 0x0f;
+ else if (likely(FM == 0xff))
+ mask = ~0;
else {
- mask = 0;
- if (FM & (1 << 0))
- mask |= 0x90000000;
- if (FM & (1 << 1))
- mask |= 0x0f000000;
- if (FM & (1 << 2))
- mask |= 0x00f00000;
- if (FM & (1 << 3))
- mask |= 0x000f0000;
- if (FM & (1 << 4))
- mask |= 0x0000f000;
- if (FM & (1 << 5))
- mask |= 0x00000f00;
- if (FM & (1 << 6))
- mask |= 0x000000f0;
- if (FM & (1 << 7))
- mask |= 0x0000000f;
+ mask = ((FM & 1) |
+ ((FM << 3) & 0x10) |
+ ((FM << 6) & 0x100) |
+ ((FM << 9) & 0x1000) |
+ ((FM << 12) & 0x10000) |
+ ((FM << 15) & 0x100000) |
+ ((FM << 18) & 0x1000000) |
+ ((FM << 21) & 0x10000000)) * 15;
}
- __FPU_FPSCR &= ~(mask);
- __FPU_FPSCR |= (frB[1] & mask);
+ fpscr = ((__FPU_FPSCR & ~mask) | (frB[1] & mask)) &
+ ~(FPSCR_VX | FPSCR_FEX | 0x800);
- __FPU_FPSCR &= ~(FPSCR_VX);
- if (__FPU_FPSCR & (FPSCR_VXSNAN | FPSCR_VXISI | FPSCR_VXIDI |
+ if (fpscr & (FPSCR_VXSNAN | FPSCR_VXISI | FPSCR_VXIDI |
FPSCR_VXZDZ | FPSCR_VXIMZ | FPSCR_VXVC |
FPSCR_VXSOFT | FPSCR_VXSQRT | FPSCR_VXCVI))
- __FPU_FPSCR |= FPSCR_VX;
-
- fpscr = __FPU_FPSCR;
- fpscr &= ~(FPSCR_FEX);
- if (((fpscr & FPSCR_VX) && (fpscr & FPSCR_VE)) ||
- ((fpscr & FPSCR_OX) && (fpscr & FPSCR_OE)) ||
- ((fpscr & FPSCR_UX) && (fpscr & FPSCR_UE)) ||
- ((fpscr & FPSCR_ZX) && (fpscr & FPSCR_ZE)) ||
- ((fpscr & FPSCR_XX) && (fpscr & FPSCR_XE)))
+ fpscr |= FPSCR_VX;
+
+ /* The bit order of exception enables and exception status
+ * is the same. Simply shift and mask to check for enabled
+ * exceptions.
+ */
+ if (fpscr & (fpscr >> 22) & 0xf8)
fpscr |= FPSCR_FEX;
+
__FPU_FPSCR = fpscr;
#ifdef DEBUG
do {
pte_t pte = ACCESS_ONCE(*ptep);
struct page *page;
+ /*
+ * Similar to the PMD case, NUMA hinting must take slow path
+ */
+ if (pte_numa(pte))
+ return 0;
if ((pte_val(pte) & mask) != result)
return 0;
if (pmd_none(pmd) || pmd_trans_splitting(pmd))
return 0;
if (pmd_huge(pmd) || pmd_large(pmd)) {
+ /*
+ * NUMA hinting faults need to be handled in the GUP
+ * slowpath for accounting purposes and so that they
+ * can be serialised against THP migration.
+ */
+ if (pmd_numa(pmd))
+ return 0;
+
if (!gup_hugepte((pte_t *)pmdp, PMD_SIZE, addr, next,
write, pages, nr))
return 0;
cpu = cpu_last_thread_sibling(cpu);
}
+ /*
+ * In cases where we have nothing to update (because the updates list
+ * is too short or because the new topology is same as the old one),
+ * skip invoking update_cpu_topology() via stop-machine(). This is
+ * necessary (and not just a fast-path optimization) since stop-machine
+ * can end up electing a random CPU to run update_cpu_topology(), and
+ * thus trick us into setting up incorrect cpu-node mappings (since
+ * 'updates' is kzalloc()'ed).
+ *
+ * And for the similar reason, we will skip all the following updating.
+ */
+ if (!cpumask_weight(&updated_cpus))
+ goto out;
+
stop_machine(update_cpu_topology, &updates[0], &updated_cpus);
/*
changed = 1;
}
+out:
kfree(updates);
return changed;
}
void unregister_spu_syscalls(struct spufs_calls *calls)
{
BUG_ON(spufs_calls->owner != calls->owner);
- rcu_assign_pointer(spufs_calls, NULL);
+ RCU_INIT_POINTER(spufs_calls, NULL);
synchronize_rcu();
}
EXPORT_SYMBOL_GPL(unregister_spu_syscalls);
select PPC_UDBG_16550
select PPC_SCOM
select ARCH_RANDOM
+ select CPU_FREQ
+ select CPU_FREQ_GOV_PERFORMANCE
+ select CPU_FREQ_GOV_POWERSAVE
+ select CPU_FREQ_GOV_USERSPACE
+ select CPU_FREQ_GOV_ONDEMAND
+ select CPU_FREQ_GOV_CONSERVATIVE
default y
config PPC_POWERNV_RTAS
obj-y += setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
+obj-y += opal-msglog.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PCI) += pci.o pci-p5ioc2.o pci-ioda.o
{
struct opal_msg *comp_msg = msg;
unsigned long flags;
+ uint64_t token;
if (msg_type != OPAL_MSG_ASYNC_COMP)
return 0;
- memcpy(&opal_async_responses[comp_msg->params[0]], comp_msg,
- sizeof(*comp_msg));
+ token = be64_to_cpu(comp_msg->params[0]);
+ memcpy(&opal_async_responses[token], comp_msg, sizeof(*comp_msg));
spin_lock_irqsave(&opal_async_comp_lock, flags);
- __set_bit(comp_msg->params[0], opal_async_complete_map);
+ __set_bit(token, opal_async_complete_map);
spin_unlock_irqrestore(&opal_async_comp_lock, flags);
wake_up(&opal_async_wait);
return rc;
}
-static void delay_release_kobj(void *kobj)
-{
- kobject_put((struct kobject *)kobj);
-}
-
static ssize_t dump_ack_store(struct dump_obj *dump_obj,
struct dump_attribute *attr,
const char *buf,
size_t count)
{
dump_send_ack(dump_obj->id);
- sysfs_schedule_callback(&dump_obj->kobj, delay_release_kobj,
- &dump_obj->kobj, THIS_MODULE);
+ sysfs_remove_file_self(&dump_obj->kobj, &attr->attr);
+ kobject_put(&dump_obj->kobj);
return count;
}
return sprintf(buf, "ack - acknowledge log message\n");
}
-static void delay_release_kobj(void *kobj)
-{
- kobject_put((struct kobject *)kobj);
-}
-
static ssize_t elog_ack_store(struct elog_obj *elog_obj,
struct elog_attribute *attr,
const char *buf,
size_t count)
{
opal_send_ack_elog(elog_obj->id);
- sysfs_schedule_callback(&elog_obj->kobj, delay_release_kobj,
- &elog_obj->kobj, THIS_MODULE);
+ sysfs_remove_file_self(&elog_obj->kobj, &attr->attr);
+ kobject_put(&elog_obj->kobj);
return count;
}
--- /dev/null
+/*
+ * PowerNV OPAL in-memory console interface
+ *
+ * Copyright 2014 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/io.h>
+#include <asm/opal.h>
+#include <linux/debugfs.h>
+#include <linux/of.h>
+#include <linux/types.h>
+#include <asm/barrier.h>
+
+/* OPAL in-memory console. Defined in OPAL source at core/console.c */
+struct memcons {
+ __be64 magic;
+#define MEMCONS_MAGIC 0x6630696567726173L
+ __be64 obuf_phys;
+ __be64 ibuf_phys;
+ __be32 obuf_size;
+ __be32 ibuf_size;
+ __be32 out_pos;
+#define MEMCONS_OUT_POS_WRAP 0x80000000u
+#define MEMCONS_OUT_POS_MASK 0x00ffffffu
+ __be32 in_prod;
+ __be32 in_cons;
+};
+
+static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *to,
+ loff_t pos, size_t count)
+{
+ struct memcons *mc = bin_attr->private;
+ const char *conbuf;
+ size_t ret, first_read = 0;
+ uint32_t out_pos, avail;
+
+ if (!mc)
+ return -ENODEV;
+
+ out_pos = be32_to_cpu(ACCESS_ONCE(mc->out_pos));
+
+ /* Now we've read out_pos, put a barrier in before reading the new
+ * data it points to in conbuf. */
+ smp_rmb();
+
+ conbuf = phys_to_virt(be64_to_cpu(mc->obuf_phys));
+
+ /* When the buffer has wrapped, read from the out_pos marker to the end
+ * of the buffer, and then read the remaining data as in the un-wrapped
+ * case. */
+ if (out_pos & MEMCONS_OUT_POS_WRAP) {
+
+ out_pos &= MEMCONS_OUT_POS_MASK;
+ avail = be32_to_cpu(mc->obuf_size) - out_pos;
+
+ ret = memory_read_from_buffer(to, count, &pos,
+ conbuf + out_pos, avail);
+
+ if (ret < 0)
+ goto out;
+
+ first_read = ret;
+ to += first_read;
+ count -= first_read;
+ pos -= avail;
+ }
+
+ /* Sanity check. The firmware should not do this to us. */
+ if (out_pos > be32_to_cpu(mc->obuf_size)) {
+ pr_err("OPAL: memory console corruption. Aborting read.\n");
+ return -EINVAL;
+ }
+
+ ret = memory_read_from_buffer(to, count, &pos, conbuf, out_pos);
+
+ if (ret < 0)
+ goto out;
+
+ ret += first_read;
+out:
+ return ret;
+}
+
+static struct bin_attribute opal_msglog_attr = {
+ .attr = {.name = "msglog", .mode = 0444},
+ .read = opal_msglog_read
+};
+
+void __init opal_msglog_init(void)
+{
+ u64 mcaddr;
+ struct memcons *mc;
+
+ if (of_property_read_u64(opal_node, "ibm,opal-memcons", &mcaddr)) {
+ pr_warn("OPAL: Property ibm,opal-memcons not found, no message log\n");
+ return;
+ }
+
+ mc = phys_to_virt(mcaddr);
+ if (!mc) {
+ pr_warn("OPAL: memory console address is invalid\n");
+ return;
+ }
+
+ if (be64_to_cpu(mc->magic) != MEMCONS_MAGIC) {
+ pr_warn("OPAL: memory console version is invalid\n");
+ return;
+ }
+
+ opal_msglog_attr.private = mc;
+
+ if (sysfs_create_bin_file(opal_kobj, &opal_msglog_attr) != 0)
+ pr_warn("OPAL: sysfs file creation failed\n");
+}
{
int ret, token;
struct opal_msg msg;
+ __be32 data;
token = opal_async_get_token_interruptible();
if (token < 0) {
}
mutex_lock(&opal_sensor_mutex);
- ret = opal_sensor_read(sensor_hndl, token, sensor_data);
+ ret = opal_sensor_read(sensor_hndl, token, &data);
if (ret != OPAL_ASYNC_COMPLETION)
goto out_token;
goto out_token;
}
- ret = msg.params[1];
+ *sensor_data = be32_to_cpu(data);
+ ret = be64_to_cpu(msg.params[1]);
out_token:
mutex_unlock(&opal_sensor_mutex);
goto out_token;
}
- ret = msg.params[1];
+ ret = be64_to_cpu(msg.params[1]);
out_token:
opal_async_release_token(token);
goto out_token;
}
- ret = msg.params[1];
+ ret = be64_to_cpu(msg.params[1]);
out_token:
opal_async_release_token(token);
mtcr r4;
rfid
+OPAL_CALL(opal_invalid_call, OPAL_INVALID_CALL);
OPAL_CALL(opal_console_write, OPAL_CONSOLE_WRITE);
OPAL_CALL(opal_console_read, OPAL_CONSOLE_READ);
OPAL_CALL(opal_console_write_buffer_space, OPAL_CONSOLE_WRITE_BUFFER_SPACE);
static struct mcheck_recoverable_range *mc_recoverable_range;
static int mc_recoverable_range_len;
-static struct device_node *opal_node;
+struct device_node *opal_node;
static DEFINE_SPINLOCK(opal_write_lock);
extern u64 opal_mc_secondary_handler[];
static unsigned int *opal_irqs;
int __init early_init_dt_scan_recoverable_ranges(unsigned long node,
const char *uname, int depth, void *data)
{
- unsigned long i, size;
+ unsigned long i, psize, size;
const __be32 *prop;
if (depth != 1 || strcmp(uname, "ibm,opal") != 0)
return 0;
- prop = of_get_flat_dt_prop(node, "mcheck-recoverable-ranges", &size);
+ prop = of_get_flat_dt_prop(node, "mcheck-recoverable-ranges", &psize);
if (!prop)
return 1;
pr_debug("Found machine check recoverable ranges.\n");
+ /*
+ * Calculate number of available entries.
+ *
+ * Each recoverable address range entry is (start address, len,
+ * recovery address), 2 cells each for start and recovery address,
+ * 1 cell for len, totalling 5 cells per entry.
+ */
+ mc_recoverable_range_len = psize / (sizeof(*prop) * 5);
+
+ /* Sanity check */
+ if (!mc_recoverable_range_len)
+ return 1;
+
+ /* Size required to hold all the entries. */
+ size = mc_recoverable_range_len *
+ sizeof(struct mcheck_recoverable_range);
+
/*
* Allocate a buffer to hold the MC recoverable ranges. We would be
* accessing them in real mode, hence it needs to be within
ppc64_rma_size));
memset(mc_recoverable_range, 0, size);
- /*
- * Each recoverable address entry is an (start address,len,
- * recover address) pair, * 2 cells each, totalling 4 cells per entry.
- */
- for (i = 0; i < size / (sizeof(*prop) * 5); i++) {
+ for (i = 0; i < mc_recoverable_range_len; i++) {
mc_recoverable_range[i].start_addr =
of_read_number(prop + (i * 5) + 0, 2);
mc_recoverable_range[i].end_addr =
mc_recoverable_range[i].end_addr,
mc_recoverable_range[i].recover_addr);
}
- mc_recoverable_range_len = i;
return 1;
}
atomic_notifier_chain_register(&opal_notifier_head, nb);
return 0;
}
+EXPORT_SYMBOL_GPL(opal_notifier_register);
+
+int opal_notifier_unregister(struct notifier_block *nb)
+{
+ if (!nb) {
+ pr_warning("%s: Invalid argument (%p)\n",
+ __func__, nb);
+ return -EINVAL;
+ }
+
+ atomic_notifier_chain_unregister(&opal_notifier_head, nb);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(opal_notifier_unregister);
static void opal_do_notifier(uint64_t events)
{
* value in /proc/device-tree.
*/
static struct opal_msg msg;
+ u32 type;
ret = opal_get_msg(__pa(&msg), sizeof(msg));
/* No opal message pending. */
return;
}
+ type = be32_to_cpu(msg.msg_type);
+
/* Sanity check */
- if (msg.msg_type > OPAL_MSG_TYPE_MAX) {
- pr_warning("%s: Unknown message type: %u\n",
- __func__, msg.msg_type);
+ if (type > OPAL_MSG_TYPE_MAX) {
+ pr_warning("%s: Unknown message type: %u\n", __func__, type);
return;
}
- opal_message_do_notify(msg.msg_type, (void *)&msg);
+ opal_message_do_notify(type, (void *)&msg);
}
static int opal_message_notify(struct notifier_block *nb,
opal_platform_dump_init();
/* Setup system parameters interface */
opal_sys_param_init();
+ /* Setup message log interface. */
+ opal_msglog_init();
}
return 0;
mdelay(10);
}
}
+
+/* Export this so that test modules can use it */
+EXPORT_SYMBOL_GPL(opal_invalid_call);
* RTAS_TYPE_IO only exists in extended event log version 6 or later.
* No need to check event log version.
*/
- if (unlikely(elog->type != RTAS_TYPE_IO)) {
- printk_once(KERN_WARNING "io_event_irq: Unexpected event type %d",
- elog->type);
+ if (unlikely(rtas_error_type(elog) != RTAS_TYPE_IO)) {
+ printk_once(KERN_WARNING"io_event_irq: Unexpected event type %d",
+ rtas_error_type(elog));
return NULL;
}
rc = ppc_md.nvram_write((char *)&info, sizeof(struct err_log_info), &tmp_index);
if (rc <= 0) {
- pr_err("%s: Failed nvram_write (%d)\n", __FUNCTION__, rc);
+ pr_err("%s: Failed nvram_write (%d)\n", __func__, rc);
return rc;
}
rc = ppc_md.nvram_write(buff, length, &tmp_index);
if (rc <= 0) {
- pr_err("%s: Failed nvram_write (%d)\n", __FUNCTION__, rc);
+ pr_err("%s: Failed nvram_write (%d)\n", __func__, rc);
return rc;
}
sizeof(struct err_log_info),
&tmp_index);
if (rc <= 0) {
- pr_err("%s: Failed nvram_read (%d)\n", __FUNCTION__,
- rc);
+ pr_err("%s: Failed nvram_read (%d)\n", __func__, rc);
return rc;
}
}
rc = ppc_md.nvram_read(buff, length, &tmp_index);
if (rc <= 0) {
- pr_err("%s: Failed nvram_read (%d)\n", __FUNCTION__, rc);
+ pr_err("%s: Failed nvram_read (%d)\n", __func__, rc);
return rc;
}
break;
default:
pr_err("%s: ignoring unrecognized KMSG_DUMP_* reason %d\n",
- __FUNCTION__, (int) reason);
+ __func__, (int) reason);
return;
}
rtas_elog = (struct rtas_error_log *)ras_log_buf;
- if ((status == 0) && (rtas_elog->severity >= RTAS_SEVERITY_ERROR_SYNC))
+ if (status == 0 &&
+ rtas_error_severity(rtas_elog) >= RTAS_SEVERITY_ERROR_SYNC)
fatal = 1;
else
fatal = 0;
/* If it isn't an extended log we can use the per cpu 64bit buffer */
h = (struct rtas_error_log *)&savep[1];
- if (!h->extended) {
+ if (!rtas_error_extended(h)) {
memcpy(&__get_cpu_var(mce_data_buf), h, sizeof(__u64));
errhdr = (struct rtas_error_log *)&__get_cpu_var(mce_data_buf);
} else {
- int len;
+ int len, error_log_length;
- len = max_t(int, 8+h->extended_log_length, RTAS_ERROR_LOG_MAX);
+ error_log_length = 8 + rtas_error_extended_log_length(h);
+ len = max_t(int, error_log_length, RTAS_ERROR_LOG_MAX);
memset(global_mce_data_buf, 0, RTAS_ERROR_LOG_MAX);
memcpy(global_mce_data_buf, h, len);
errhdr = (struct rtas_error_log *)global_mce_data_buf;
static int recover_mce(struct pt_regs *regs, struct rtas_error_log *err)
{
int recovered = 0;
+ int disposition = rtas_error_disposition(err);
if (!(regs->msr & MSR_RI)) {
/* If MSR_RI isn't set, we cannot recover */
recovered = 0;
- } else if (err->disposition == RTAS_DISP_FULLY_RECOVERED) {
+ } else if (disposition == RTAS_DISP_FULLY_RECOVERED) {
/* Platform corrected itself */
recovered = 1;
- } else if (err->disposition == RTAS_DISP_LIMITED_RECOVERY) {
+ } else if (disposition == RTAS_DISP_LIMITED_RECOVERY) {
/* Platform corrected itself but could be degraded */
printk(KERN_ERR "MCE: limited recovery, system may "
"be degraded\n");
recovered = 1;
} else if (user_mode(regs) && !is_global_init(current) &&
- err->severity == RTAS_SEVERITY_ERROR_SYNC) {
+ rtas_error_severity(err) == RTAS_SEVERITY_ERROR_SYNC) {
/*
* If we received a synchronous error when in userspace
/* There should really be a struct device_node allocator */
memset(&of_node, 0, sizeof(of_node));
- kref_init(&of_node.kobj.kref);
+ of_node_init(&of_node);
of_node.full_name = node_name;
check(0 == msi_bitmap_alloc(&bmp, size, &of_node));
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+ select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_JUMP_LABEL if !MARCH_G5
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
-CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
#ifndef _ASM_SYSCALL_H
#define _ASM_SYSCALL_H 1
-#include <linux/audit.h>
+#include <uapi/linux/audit.h>
#include <linux/sched.h>
#include <linux/err.h>
#include <asm/ptrace.h>
regs->orig_gpr2 = args[0];
}
-static inline int syscall_get_arch(struct task_struct *task,
- struct pt_regs *regs)
+static inline int syscall_get_arch(void)
{
#ifdef CONFIG_COMPAT
- if (test_tsk_thread_flag(task, TIF_31BIT))
+ if (test_tsk_thread_flag(current, TIF_31BIT))
return AUDIT_ARCH_S390;
#endif
return sizeof(long) == 8 ? AUDIT_ARCH_S390X : AUDIT_ARCH_S390;
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND
select OLD_SIGACTION
+ select HAVE_ARCH_AUDITSYSCALL
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
-CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select HAVE_C_RECORDMCOUNT
select NO_BOOTMEM
+ select HAVE_ARCH_AUDITSYSCALL
config ARCH_DEFCONFIG
string
config UML
bool
default y
+ select HAVE_ARCH_AUDITSYSCALL
select HAVE_UID16
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select HAVE_IRQ_EXIT_ON_IRQ_STACK if X86_64
select HAVE_CC_STACKPROTECTOR
select GENERIC_CPU_AUTOPROBE
+ select HAVE_ARCH_AUDITSYSCALL
config INSTRUCTION_DECODER
def_bool y
# this works around some issues with generating unwind tables in older gccs
# newer gccs do it by default
- KBUILD_CFLAGS += -maccumulate-outgoing-args
+ KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args)
endif
# Make sure compiler does not have buggy stack-protector support.
efi_file_info_t *info;
efi_status_t status;
efi_guid_t info_guid = EFI_FILE_INFO_ID;
- u32 info_sz;
+ u64 info_sz;
status = efi_early->call((unsigned long)fh->open, fh, &h, filename_16,
EFI_FILE_MODE_READ, (u64)0);
}
static inline efi_status_t
-efi_file_read(void *__fh, void *handle, unsigned long *size, void *addr)
+efi_file_read(void *handle, unsigned long *size, void *addr)
{
unsigned long func;
if (efi_early->is64) {
- efi_file_handle_64_t *fh = __fh;
+ efi_file_handle_64_t *fh = handle;
func = (unsigned long)fh->read;
return efi_early->call(func, handle, size, addr);
} else {
- efi_file_handle_32_t *fh = __fh;
+ efi_file_handle_32_t *fh = handle;
func = (unsigned long)fh->read;
return efi_early->call(func, handle, size, addr);
}
}
-static inline efi_status_t efi_file_close(void *__fh, void *handle)
+static inline efi_status_t efi_file_close(void *handle)
{
if (efi_early->is64) {
- efi_file_handle_64_t *fh = __fh;
+ efi_file_handle_64_t *fh = handle;
return efi_early->call((unsigned long)fh->close, handle);
} else {
- efi_file_handle_32_t *fh = __fh;
+ efi_file_handle_32_t *fh = handle;
return efi_early->call((unsigned long)fh->close, handle);
}
* Because the x86 boot code expects to be passed a boot_params we
* need to create one ourselves (usually the bootloader would create
* one for us).
+ *
+ * The caller is responsible for filling out ->code32_start in the
+ * returned boot_params.
*/
struct boot_params *make_boot_params(struct efi_config *c)
{
hdr->vid_mode = 0xffff;
hdr->boot_flag = 0xAA55;
- hdr->code32_start = (__u64)(unsigned long)image->image_base;
-
hdr->type_of_loader = 0x21;
/* Convert unicode cmdline to ascii */
call make_boot_params
cmpl $0, %eax
je fail
+ movl %esi, BP_code32_start(%eax)
popl %ecx
pushl %eax
pushl %ecx
hlt
jmp fail
2:
- call 3f
-3:
- popl %eax
- subl $3b, %eax
- subl BP_pref_address(%esi), %eax
- add BP_code32_start(%esi), %eax
+ movl BP_code32_start(%esi), %eax
leal preferred_addr(%eax), %eax
jmp *%eax
cmpq $0,%rax
je fail
mov %rax, %rsi
+ leaq startup_32(%rip), %rax
+ movl %eax, BP_code32_start(%rsi)
jmp 2f /* Skip the relocation */
handover_entry:
hlt
jmp fail
2:
- call 3f
-3:
- popq %rax
- subq $3b, %rax
- subq BP_pref_address(%rsi), %rax
- add BP_code32_start(%esi), %eax
+ movl BP_code32_start(%esi), %eax
leaq preferred_addr(%rax), %rax
jmp *%rax
#ifndef _ASM_X86_SYSCALL_H
#define _ASM_X86_SYSCALL_H
-#include <linux/audit.h>
+#include <uapi/linux/audit.h>
#include <linux/sched.h>
#include <linux/err.h>
#include <asm/asm-offsets.h> /* For NR_syscalls */
memcpy(®s->bx + i, args, n * sizeof(args[0]));
}
-static inline int syscall_get_arch(struct task_struct *task,
- struct pt_regs *regs)
+static inline int syscall_get_arch(void)
{
return AUDIT_ARCH_I386;
}
}
}
-static inline int syscall_get_arch(struct task_struct *task,
- struct pt_regs *regs)
+static inline int syscall_get_arch(void)
{
#ifdef CONFIG_IA32_EMULATION
/*
*
* x32 tasks should be considered AUDIT_ARCH_X86_64.
*/
- if (task_thread_info(task)->status & TS_COMPAT)
+ if (task_thread_info(current)->status & TS_COMPAT)
return AUDIT_ARCH_I386;
#endif
/* Both x32 and x86_64 are considered "64-bit". */
num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK;
retval = 0;
- if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) {
+ /* If the HW does not support any sub-states in this C-state */
+ if (num_cstate_subtype == 0) {
+ pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n", cx->address, edx_part);
retval = -1;
goto out;
}
};
/* First tickle the hardware, only then report what went on. -- REW */
- apic_write(APIC_ESR, 0);
+ if (lapic_get_maxlvt() > 3) /* Due to the Pentium erratum 3AP. */
+ apic_write(APIC_ESR, 0);
v = apic_read(APIC_ESR);
ack_APIC_irq();
atomic_inc(&irq_err_count);
static DEFINE_PER_CPU(struct mce, mces_seen);
static int cpu_missing;
+/* CMCI storm detection filter */
+static DEFINE_PER_CPU(unsigned long, mce_polled_error);
+
/*
* MCA banks polled by the period polling timer for corrected events.
* With Intel CMCI, this only has MCA banks which do not support CMCI (if any).
{
struct mce m;
int i;
+ unsigned long *v;
this_cpu_inc(mce_poll_count);
if (!(m.status & MCI_STATUS_VAL))
continue;
+ v = &get_cpu_var(mce_polled_error);
+ set_bit(0, v);
/*
* Uncorrected or signalled events are handled by the exception
* handler when it is enabled, so don't process those here.
static unsigned long (*mce_adjust_timer)(unsigned long interval) =
mce_adjust_timer_default;
+static int cmc_error_seen(void)
+{
+ unsigned long *v = &__get_cpu_var(mce_polled_error);
+
+ return test_and_clear_bit(0, v);
+}
+
static void mce_timer_fn(unsigned long data)
{
struct timer_list *t = &__get_cpu_var(mce_timer);
unsigned long iv;
+ int notify;
WARN_ON(smp_processor_id() != data);
* polling interval, otherwise increase the polling interval.
*/
iv = __this_cpu_read(mce_next_interval);
- if (mce_notify_irq()) {
+ notify = mce_notify_irq();
+ notify |= cmc_error_seen();
+ if (notify) {
iv = max(iv / 2, (unsigned long) HZ/100);
} else {
iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/sched.h>
+#include <linux/cpumask.h>
#include <asm/apic.h>
#include <asm/processor.h>
#include <asm/msr.h>
}
}
+static void cmci_storm_disable_banks(void)
+{
+ unsigned long flags, *owned;
+ int bank;
+ u64 val;
+
+ raw_spin_lock_irqsave(&cmci_discover_lock, flags);
+ owned = __get_cpu_var(mce_banks_owned);
+ for_each_set_bit(bank, owned, MAX_NR_BANKS) {
+ rdmsrl(MSR_IA32_MCx_CTL2(bank), val);
+ val &= ~MCI_CTL2_CMCI_EN;
+ wrmsrl(MSR_IA32_MCx_CTL2(bank), val);
+ }
+ raw_spin_unlock_irqrestore(&cmci_discover_lock, flags);
+}
+
static bool cmci_storm_detect(void)
{
unsigned int cnt = __this_cpu_read(cmci_storm_cnt);
if (cnt <= CMCI_STORM_THRESHOLD)
return false;
- cmci_clear();
+ cmci_storm_disable_banks();
__this_cpu_write(cmci_storm_state, CMCI_STORM_ACTIVE);
r = atomic_add_return(1, &cmci_storm_on_cpus);
mce_timer_kick(CMCI_POLL_INTERVAL);
*
* And yes, so far on current devices the base addr is always under 4G.
*/
-static u32 __init intel_stolen_base(int num, int slot, int func)
+static u32 __init intel_stolen_base(int num, int slot, int func, size_t stolen_size)
{
u32 base;
#define MB(x) (KB (KB (x)))
#define GB(x) (MB (KB (x)))
+static size_t __init i830_tseg_size(void)
+{
+ u8 tmp = read_pci_config_byte(0, 0, 0, I830_ESMRAMC);
+
+ if (!(tmp & TSEG_ENABLE))
+ return 0;
+
+ if (tmp & I830_TSEG_SIZE_1M)
+ return MB(1);
+ else
+ return KB(512);
+}
+
+static size_t __init i845_tseg_size(void)
+{
+ u8 tmp = read_pci_config_byte(0, 0, 0, I845_ESMRAMC);
+
+ if (!(tmp & TSEG_ENABLE))
+ return 0;
+
+ switch (tmp & I845_TSEG_SIZE_MASK) {
+ case I845_TSEG_SIZE_512K:
+ return KB(512);
+ case I845_TSEG_SIZE_1M:
+ return MB(1);
+ default:
+ WARN_ON(1);
+ return 0;
+ }
+}
+
+static size_t __init i85x_tseg_size(void)
+{
+ u8 tmp = read_pci_config_byte(0, 0, 0, I85X_ESMRAMC);
+
+ if (!(tmp & TSEG_ENABLE))
+ return 0;
+
+ return MB(1);
+}
+
+static size_t __init i830_mem_size(void)
+{
+ return read_pci_config_byte(0, 0, 0, I830_DRB3) * MB(32);
+}
+
+static size_t __init i85x_mem_size(void)
+{
+ return read_pci_config_byte(0, 0, 1, I85X_DRB3) * MB(32);
+}
+
+/*
+ * On 830/845/85x the stolen memory base isn't available in any
+ * register. We need to calculate it as TOM-TSEG_SIZE-stolen_size.
+ */
+static u32 __init i830_stolen_base(int num, int slot, int func, size_t stolen_size)
+{
+ return i830_mem_size() - i830_tseg_size() - stolen_size;
+}
+
+static u32 __init i845_stolen_base(int num, int slot, int func, size_t stolen_size)
+{
+ return i830_mem_size() - i845_tseg_size() - stolen_size;
+}
+
+static u32 __init i85x_stolen_base(int num, int slot, int func, size_t stolen_size)
+{
+ return i85x_mem_size() - i85x_tseg_size() - stolen_size;
+}
+
+static u32 __init i865_stolen_base(int num, int slot, int func, size_t stolen_size)
+{
+ /*
+ * FIXME is the graphics stolen memory region
+ * always at TOUD? Ie. is it always the last
+ * one to be allocated by the BIOS?
+ */
+ return read_pci_config_16(0, 0, 0, I865_TOUD) << 16;
+}
+
+static size_t __init i830_stolen_size(int num, int slot, int func)
+{
+ size_t stolen_size;
+ u16 gmch_ctrl;
+
+ gmch_ctrl = read_pci_config_16(0, 0, 0, I830_GMCH_CTRL);
+
+ switch (gmch_ctrl & I830_GMCH_GMS_MASK) {
+ case I830_GMCH_GMS_STOLEN_512:
+ stolen_size = KB(512);
+ break;
+ case I830_GMCH_GMS_STOLEN_1024:
+ stolen_size = MB(1);
+ break;
+ case I830_GMCH_GMS_STOLEN_8192:
+ stolen_size = MB(8);
+ break;
+ case I830_GMCH_GMS_LOCAL:
+ /* local memory isn't part of the normal address space */
+ stolen_size = 0;
+ break;
+ default:
+ return 0;
+ }
+
+ return stolen_size;
+}
+
static size_t __init gen3_stolen_size(int num, int slot, int func)
{
size_t stolen_size;
return gmch_ctrl << 25; /* 32 MB units */
}
-static inline size_t gen8_stolen_size(int num, int slot, int func)
+static size_t gen8_stolen_size(int num, int slot, int func)
{
u16 gmch_ctrl;
return gmch_ctrl << 25; /* 32 MB units */
}
-typedef size_t (*stolen_size_fn)(int num, int slot, int func);
+
+struct intel_stolen_funcs {
+ size_t (*size)(int num, int slot, int func);
+ u32 (*base)(int num, int slot, int func, size_t size);
+};
+
+static const struct intel_stolen_funcs i830_stolen_funcs = {
+ .base = i830_stolen_base,
+ .size = i830_stolen_size,
+};
+
+static const struct intel_stolen_funcs i845_stolen_funcs = {
+ .base = i845_stolen_base,
+ .size = i830_stolen_size,
+};
+
+static const struct intel_stolen_funcs i85x_stolen_funcs = {
+ .base = i85x_stolen_base,
+ .size = gen3_stolen_size,
+};
+
+static const struct intel_stolen_funcs i865_stolen_funcs = {
+ .base = i865_stolen_base,
+ .size = gen3_stolen_size,
+};
+
+static const struct intel_stolen_funcs gen3_stolen_funcs = {
+ .base = intel_stolen_base,
+ .size = gen3_stolen_size,
+};
+
+static const struct intel_stolen_funcs gen6_stolen_funcs = {
+ .base = intel_stolen_base,
+ .size = gen6_stolen_size,
+};
+
+static const struct intel_stolen_funcs gen8_stolen_funcs = {
+ .base = intel_stolen_base,
+ .size = gen8_stolen_size,
+};
static struct pci_device_id intel_stolen_ids[] __initdata = {
- INTEL_I915G_IDS(gen3_stolen_size),
- INTEL_I915GM_IDS(gen3_stolen_size),
- INTEL_I945G_IDS(gen3_stolen_size),
- INTEL_I945GM_IDS(gen3_stolen_size),
- INTEL_VLV_M_IDS(gen6_stolen_size),
- INTEL_VLV_D_IDS(gen6_stolen_size),
- INTEL_PINEVIEW_IDS(gen3_stolen_size),
- INTEL_I965G_IDS(gen3_stolen_size),
- INTEL_G33_IDS(gen3_stolen_size),
- INTEL_I965GM_IDS(gen3_stolen_size),
- INTEL_GM45_IDS(gen3_stolen_size),
- INTEL_G45_IDS(gen3_stolen_size),
- INTEL_IRONLAKE_D_IDS(gen3_stolen_size),
- INTEL_IRONLAKE_M_IDS(gen3_stolen_size),
- INTEL_SNB_D_IDS(gen6_stolen_size),
- INTEL_SNB_M_IDS(gen6_stolen_size),
- INTEL_IVB_M_IDS(gen6_stolen_size),
- INTEL_IVB_D_IDS(gen6_stolen_size),
- INTEL_HSW_D_IDS(gen6_stolen_size),
- INTEL_HSW_M_IDS(gen6_stolen_size),
- INTEL_BDW_M_IDS(gen8_stolen_size),
- INTEL_BDW_D_IDS(gen8_stolen_size)
+ INTEL_I830_IDS(&i830_stolen_funcs),
+ INTEL_I845G_IDS(&i845_stolen_funcs),
+ INTEL_I85X_IDS(&i85x_stolen_funcs),
+ INTEL_I865G_IDS(&i865_stolen_funcs),
+ INTEL_I915G_IDS(&gen3_stolen_funcs),
+ INTEL_I915GM_IDS(&gen3_stolen_funcs),
+ INTEL_I945G_IDS(&gen3_stolen_funcs),
+ INTEL_I945GM_IDS(&gen3_stolen_funcs),
+ INTEL_VLV_M_IDS(&gen6_stolen_funcs),
+ INTEL_VLV_D_IDS(&gen6_stolen_funcs),
+ INTEL_PINEVIEW_IDS(&gen3_stolen_funcs),
+ INTEL_I965G_IDS(&gen3_stolen_funcs),
+ INTEL_G33_IDS(&gen3_stolen_funcs),
+ INTEL_I965GM_IDS(&gen3_stolen_funcs),
+ INTEL_GM45_IDS(&gen3_stolen_funcs),
+ INTEL_G45_IDS(&gen3_stolen_funcs),
+ INTEL_IRONLAKE_D_IDS(&gen3_stolen_funcs),
+ INTEL_IRONLAKE_M_IDS(&gen3_stolen_funcs),
+ INTEL_SNB_D_IDS(&gen6_stolen_funcs),
+ INTEL_SNB_M_IDS(&gen6_stolen_funcs),
+ INTEL_IVB_M_IDS(&gen6_stolen_funcs),
+ INTEL_IVB_D_IDS(&gen6_stolen_funcs),
+ INTEL_HSW_D_IDS(&gen6_stolen_funcs),
+ INTEL_HSW_M_IDS(&gen6_stolen_funcs),
+ INTEL_BDW_M_IDS(&gen8_stolen_funcs),
+ INTEL_BDW_D_IDS(&gen8_stolen_funcs)
};
static void __init intel_graphics_stolen(int num, int slot, int func)
for (i = 0; i < ARRAY_SIZE(intel_stolen_ids); i++) {
if (intel_stolen_ids[i].device == device) {
- stolen_size_fn stolen_size =
- (stolen_size_fn)intel_stolen_ids[i].driver_data;
- size = stolen_size(num, slot, func);
- start = intel_stolen_base(num, slot, func);
+ const struct intel_stolen_funcs *stolen_funcs =
+ (const struct intel_stolen_funcs *)intel_stolen_ids[i].driver_data;
+ size = stolen_funcs->size(num, slot, func);
+ start = stolen_funcs->base(num, slot, func, size);
if (size && start) {
+ printk(KERN_INFO "Reserving Intel graphics stolen memory at 0x%x-0x%x\n",
+ start, start + (u32)size - 1);
/* Mark this space as reserved */
e820_add_region(start, size, E820_RESERVED);
sanitize_e820_map(e820.map,
seq_printf(p, "%10u ", per_cpu(mce_poll_count, j));
seq_printf(p, " Machine check polls\n");
#endif
-#if defined(CONFIG_HYPERV) || defined(CONFIG_XEN)
+#if IS_ENABLED(CONFIG_HYPERV) || defined(CONFIG_XEN)
seq_printf(p, "%*s: ", prec, "THR");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_hv_callback_count);
}
}
+ /*
+ * On x86-64 we do not support 16-bit segments due to
+ * IRET leaking the high bits of the kernel stack address.
+ */
+#ifdef CONFIG_X86_64
+ if (!ldt_info.seg_32bit) {
+ error = -EINVAL;
+ goto out_unlock;
+ }
+#endif
+
fill_ldt(&ldt, &ldt_info);
if (oldmode)
ldt.avl = 0;
return ret;
}
-static inline int __init determine_tce_table_size(u64 ram)
+static inline int __init determine_tce_table_size(void)
{
int ret;
if (specified_table_size != TCE_TABLE_SIZE_UNSPECIFIED)
return specified_table_size;
- /*
- * Table sizes are from 0 to 7 (TCE_TABLE_SIZE_64K to
- * TCE_TABLE_SIZE_8M). Table size 0 has 8K entries and each
- * larger table size has twice as many entries, so shift the
- * max ram address by 13 to divide by 8K and then look at the
- * order of the result to choose between 0-7.
- */
- ret = get_order(ram >> 13);
- if (ret > TCE_TABLE_SIZE_8M)
+ if (is_kdump_kernel() && saved_max_pfn) {
+ /*
+ * Table sizes are from 0 to 7 (TCE_TABLE_SIZE_64K to
+ * TCE_TABLE_SIZE_8M). Table size 0 has 8K entries and each
+ * larger table size has twice as many entries, so shift the
+ * max ram address by 13 to divide by 8K and then look at the
+ * order of the result to choose between 0-7.
+ */
+ ret = get_order((saved_max_pfn * PAGE_SIZE) >> 13);
+ if (ret > TCE_TABLE_SIZE_8M)
+ ret = TCE_TABLE_SIZE_8M;
+ } else {
+ /*
+ * Use 8M by default (suggested by Muli) if it's not
+ * kdump kernel and saved_max_pfn isn't set.
+ */
ret = TCE_TABLE_SIZE_8M;
+ }
return ret;
}
return -ENOMEM;
}
- specified_table_size = determine_tce_table_size((is_kdump_kernel() ?
- saved_max_pfn : max_pfn) * PAGE_SIZE);
+ specified_table_size = determine_tce_table_size();
for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
struct calgary_bus_info *info = &bus_info[bus];
*/
static int __init param_kmemcheck(char *str)
{
+ int val;
+ int ret;
+
if (!str)
return -EINVAL;
- sscanf(str, "%d", &kmemcheck_enabled);
+ ret = kstrtoint(str, 0, &val);
+ if (ret)
+ return ret;
+ kmemcheck_enabled = val;
return 0;
}
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_NOMMU_REGIONS=y
-# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
struct request_list *rl = blk_rq_rl(req);
BUG_ON(!list_empty(&req->queuelist));
- BUG_ON(!hlist_unhashed(&req->hash));
+ BUG_ON(ELV_ON_HASH(req));
blk_free_request(rl, req);
freed_request(rl, flags);
* unmapping.
*/
int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
- struct rq_map_data *map_data, struct sg_iovec *iov,
+ struct rq_map_data *map_data, const struct sg_iovec *iov,
int iov_count, unsigned int len, gfp_t gfp_mask)
{
struct bio *bio;
unsigned int cpu)
{
struct blk_mq_hw_ctx *hctx = data;
+ struct request_queue *q = hctx->queue;
struct blk_mq_ctx *ctx;
LIST_HEAD(tmp);
/*
* Move ctx entries to new CPU, if this one is going away.
*/
- ctx = __blk_mq_get_ctx(hctx->queue, cpu);
+ ctx = __blk_mq_get_ctx(q, cpu);
spin_lock(&ctx->lock);
if (!list_empty(&ctx->rq_list)) {
if (list_empty(&tmp))
return;
- ctx = blk_mq_get_ctx(hctx->queue);
+ ctx = blk_mq_get_ctx(q);
spin_lock(&ctx->lock);
while (!list_empty(&tmp)) {
list_move_tail(&rq->queuelist, &ctx->rq_list);
}
+ hctx = q->mq_ops->map_queue(q, ctx->cpu);
blk_mq_hctx_mark_pending(hctx, ctx);
spin_unlock(&ctx->lock);
blk_mq_put_ctx(ctx);
+
+ blk_mq_run_hw_queue(hctx, true);
}
static int blk_mq_init_hw_commands(struct blk_mq_hw_ctx *hctx,
while (!list_empty(&local_list)) {
struct request *rq;
- rq = list_entry(local_list.next, struct request, queuelist);
- list_del_init(&rq->queuelist);
+ rq = list_entry(local_list.next, struct request, ipi_list);
+ list_del_init(&rq->ipi_list);
rq->q->softirq_done_fn(rq);
}
}
local_irq_save(flags);
list = this_cpu_ptr(&blk_cpu_done);
- /*
- * We reuse queuelist for a list of requests to process. Since the
- * queuelist is used by the block layer only for requests waiting to be
- * submitted to the device it is unused now.
- */
- list_add_tail(&rq->queuelist, list);
+ list_add_tail(&rq->ipi_list, list);
- if (list->next == &rq->queuelist)
+ if (list->next == &rq->ipi_list)
raise_softirq_irqoff(BLOCK_SOFTIRQ);
local_irq_restore(flags);
struct list_head *list;
do_local:
list = this_cpu_ptr(&blk_cpu_done);
- list_add_tail(&req->queuelist, list);
+ list_add_tail(&req->ipi_list, list);
/*
* if the list only contains our just added request,
* entries there, someone already raised the irq but it
* hasn't run yet.
*/
- if (list->next == &req->queuelist)
+ if (list->next == &req->ipi_list)
raise_softirq_irqoff(BLOCK_SOFTIRQ);
} else if (raise_blk_irq(ccpu, req))
goto do_local;
/*
* Internal elevator interface
*/
-#define ELV_ON_HASH(rq) hash_hashed(&(rq)->hash)
+#define ELV_ON_HASH(rq) ((rq)->cmd_flags & REQ_HASHED)
void blk_insert_flush(struct request *rq);
void blk_abort_flushes(struct request_queue *q);
static inline void __elv_rqhash_del(struct request *rq)
{
hash_del(&rq->hash);
+ rq->cmd_flags &= ~REQ_HASHED;
}
static void elv_rqhash_del(struct request_queue *q, struct request *rq)
BUG_ON(ELV_ON_HASH(rq));
hash_add(e->hash, &rq->hash, rq_hash_key(rq));
+ rq->cmd_flags |= REQ_HASHED;
}
static void elv_rqhash_reposition(struct request_queue *q, struct request *rq)
ACPI CA, see:
<http://acpica.org/>
- ACPI is an open industry specification co-developed by
- Hewlett-Packard, Intel, Microsoft, Phoenix, and Toshiba.
+ ACPI is an open industry specification originally co-developed by
+ Hewlett-Packard, Intel, Microsoft, Phoenix, and Toshiba. Currently,
+ it is developed by the ACPI Specification Working Group (ASWG) under
+ the UEFI Forum and any UEFI member can join the ASWG and contribute
+ to the ACPI specification.
The specification is available at:
<http://www.acpi.info>
+ <http://www.uefi.org/acpi/specs>
if ACPI
" the driver to wait for userspace to write the undock sysfs file "
" before undocking");
-static const struct acpi_device_id dock_device_ids[] = {
- {"LNXDOCK", 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, dock_device_ids);
-
struct dock_station {
acpi_handle handle;
unsigned long last_dock_time;
{
struct semaphore *sem = NULL;
- sem = acpi_os_allocate(sizeof(struct semaphore));
+ sem = acpi_os_allocate_zeroed(sizeof(struct semaphore));
if (!sem)
return AE_NO_MEMORY;
- memset(sem, 0, sizeof(struct semaphore));
sema_init(sem, initial_units);
tz->trips.hot.flags.valid = 1;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Found hot threshold [%lu]\n",
- tz->trips.critical.temperature));
+ tz->trips.hot.temperature));
}
}
* Validate output buffer.
*/
if (buffer->length == ACPI_ALLOCATE_BUFFER) {
- buffer->pointer = ACPI_ALLOCATE(size_required);
+ buffer->pointer = ACPI_ALLOCATE_ZEROED(size_required);
if (!buffer->pointer)
return AE_NO_MEMORY;
buffer->length = size_required;
- memset(buffer->pointer, 0, size_required);
} else {
if (buffer->length < size_required) {
buffer->length = size_required;
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Yoga 13"),
},
},
+ {
+ .callback = video_set_use_native_backlight,
+ .ident = "Thinkpad Helix",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Helix"),
+ },
+ },
{
.callback = video_set_use_native_backlight,
.ident = "Dell Inspiron 7520",
return 0;
}
+static bool pd_ignore_unused;
+static int __init pd_ignore_unused_setup(char *__unused)
+{
+ pd_ignore_unused = true;
+ return 1;
+}
+__setup("pd_ignore_unused", pd_ignore_unused_setup);
+
/**
* pm_genpd_poweroff_unused - Power off all PM domains with no devices in use.
*/
{
struct generic_pm_domain *genpd;
+ if (pd_ignore_unused) {
+ pr_warn("genpd: Not disabling unused power domains\n");
+ return;
+ }
+
mutex_lock(&gpd_list_lock);
list_for_each_entry(genpd, &gpd_list, gpd_list_node)
if (ret != 0)
goto err_range;
- if (dev)
+ if (dev) {
ret = regmap_attach_dev(dev, map, config);
if (ret != 0)
goto err_regcache;
+ }
return map;
static int drbd_recv_short(struct socket *sock, void *buf, size_t size, int flags)
{
- mm_segment_t oldfs;
struct kvec iov = {
.iov_base = buf,
.iov_len = size,
};
struct msghdr msg = {
- .msg_iovlen = 1,
- .msg_iov = (struct iovec *)&iov,
.msg_flags = (flags ? flags : MSG_WAITALL | MSG_NOSIGNAL)
};
- int rv;
-
- oldfs = get_fs();
- set_fs(KERNEL_DS);
- rv = sock_recvmsg(sock, &msg, size, msg.msg_flags);
- set_fs(oldfs);
-
- return rv;
+ return kernel_recvmsg(sock, &msg, &iov, 1, size, msg.msg_flags);
}
static int drbd_recv(struct drbd_connection *connection, void *buf, size_t size)
file_end_write(file);
if (likely(bw == len))
return 0;
- printk(KERN_ERR "loop: Write error at byte offset %llu, length %i.\n",
+ printk_ratelimited(KERN_ERR "loop: Write error at byte offset %llu, length %i.\n",
(unsigned long long)pos, len);
if (bw >= 0)
bw = -EIO;
return __do_lo_send_write(lo->lo_backing_file,
page_address(page), bvec->bv_len,
pos);
- printk(KERN_ERR "loop: Transfer error at byte offset %llu, "
+ printk_ratelimited(KERN_ERR "loop: Transfer error at byte offset %llu, "
"length %i.\n", (unsigned long long)pos, bvec->bv_len);
if (ret > 0)
ret = -EIO;
out:
return ret;
fail:
- printk(KERN_ERR "loop: Failed to allocate temporary page for write.\n");
+ printk_ratelimited(KERN_ERR "loop: Failed to allocate temporary page for write.\n");
ret = -ENOMEM;
goto out;
}
size = p->bsize;
if (lo_do_transfer(lo, READ, page, buf->offset, p->page, p->offset, size, IV)) {
- printk(KERN_ERR "loop: transfer error block %ld\n",
+ printk_ratelimited(KERN_ERR "loop: transfer error block %ld\n",
page->index);
size = -EINVAL;
}
}
case NBD_CLEAR_SOCK: {
- struct file *file;
-
+ struct socket *sock = nbd->sock;
nbd->sock = NULL;
- file = nbd->file;
- nbd->file = NULL;
nbd_clear_que(nbd);
BUG_ON(!list_empty(&nbd->queue_head));
BUG_ON(!list_empty(&nbd->waiting_queue));
kill_bdev(bdev);
- if (file)
- fput(file);
+ if (sock)
+ sockfd_put(sock);
return 0;
}
case NBD_SET_SOCK: {
- struct file *file;
- if (nbd->file)
+ struct socket *sock;
+ int err;
+ if (nbd->sock)
return -EBUSY;
- file = fget(arg);
- if (file) {
- struct inode *inode = file_inode(file);
- if (S_ISSOCK(inode->i_mode)) {
- nbd->file = file;
- nbd->sock = SOCKET_I(inode);
- if (max_part > 0)
- bdev->bd_invalidated = 1;
- nbd->disconnect = 0; /* we're connected now */
- return 0;
- } else {
- fput(file);
- }
+ sock = sockfd_lookup(arg, &err);
+ if (sock) {
+ nbd->sock = sock;
+ if (max_part > 0)
+ bdev->bd_invalidated = 1;
+ nbd->disconnect = 0; /* we're connected now */
+ return 0;
}
return -EINVAL;
}
case NBD_DO_IT: {
struct task_struct *thread;
- struct file *file;
+ struct socket *sock;
int error;
if (nbd->pid)
return -EBUSY;
- if (!nbd->file)
+ if (!nbd->sock)
return -EINVAL;
mutex_unlock(&nbd->tx_lock);
if (error)
return error;
sock_shutdown(nbd, 0);
- file = nbd->file;
- nbd->file = NULL;
+ sock = nbd->sock;
+ nbd->sock = NULL;
nbd_clear_que(nbd);
dev_warn(disk_to_dev(nbd->disk), "queue cleared\n");
kill_bdev(bdev);
queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, nbd->disk->queue);
set_device_ro(bdev, false);
- if (file)
- fput(file);
+ if (sock)
+ sockfd_put(sock);
nbd->flags = 0;
nbd->bytesize = 0;
bdev->bd_inode->i_size = 0;
for (i = 0; i < nbds_max; i++) {
struct gendisk *disk = nbd_dev[i].disk;
- nbd_dev[i].file = NULL;
nbd_dev[i].magic = NBD_MAGIC;
- nbd_dev[i].flags = 0;
INIT_LIST_HEAD(&nbd_dev[i].waiting_queue);
spin_lock_init(&nbd_dev[i].queue_lock);
INIT_LIST_HEAD(&nbd_dev[i].queue_head);
/*
* NVM Express device driver
- * Copyright (c) 2011, Intel Corporation.
+ * Copyright (c) 2011-2014, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
#include <linux/bio.h>
#include <linux/bitops.h>
#include <linux/blkdev.h>
+#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/genhd.h>
+#include <linux/hdreg.h>
#include <linux/idr.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/percpu.h>
#include <linux/poison.h>
#include <linux/ptrace.h>
#include <linux/sched.h>
#define SQ_SIZE(depth) (depth * sizeof(struct nvme_command))
#define CQ_SIZE(depth) (depth * sizeof(struct nvme_completion))
#define ADMIN_TIMEOUT (60 * HZ)
+#define IOD_TIMEOUT (4 * NVME_IO_TIMEOUT)
+
+unsigned char io_timeout = 30;
+module_param(io_timeout, byte, 0644);
+MODULE_PARM_DESC(io_timeout, "timeout in seconds for I/O");
static int nvme_major;
module_param(nvme_major, int, 0);
static LIST_HEAD(dev_list);
static struct task_struct *nvme_thread;
static struct workqueue_struct *nvme_workq;
+static wait_queue_head_t nvme_kthread_wait;
static void nvme_reset_failed_dev(struct work_struct *ws);
* commands and one for I/O commands).
*/
struct nvme_queue {
+ struct rcu_head r_head;
struct device *q_dmadev;
struct nvme_dev *dev;
char irqname[24]; /* nvme4294967295-65535\0 */
wait_queue_head_t sq_full;
wait_queue_t sq_cong_wait;
struct bio_list sq_cong;
+ struct list_head iod_bio;
u32 __iomem *q_db;
u16 q_depth;
u16 cq_vector;
u8 cq_phase;
u8 cqe_seen;
u8 q_suspended;
+ cpumask_var_t cpu_mask;
struct async_cmd_info cmdinfo;
unsigned long cmdid_data[];
};
BUILD_BUG_ON(sizeof(struct nvme_smart_log) != 512);
}
-typedef void (*nvme_completion_fn)(struct nvme_dev *, void *,
+typedef void (*nvme_completion_fn)(struct nvme_queue *, void *,
struct nvme_completion *);
struct nvme_cmd_info {
#define CMD_CTX_FLUSH (0x318 + CMD_CTX_BASE)
#define CMD_CTX_ABORT (0x31C + CMD_CTX_BASE)
-static void special_completion(struct nvme_dev *dev, void *ctx,
+static void special_completion(struct nvme_queue *nvmeq, void *ctx,
struct nvme_completion *cqe)
{
if (ctx == CMD_CTX_CANCELLED)
if (ctx == CMD_CTX_FLUSH)
return;
if (ctx == CMD_CTX_ABORT) {
- ++dev->abort_limit;
+ ++nvmeq->dev->abort_limit;
return;
}
if (ctx == CMD_CTX_COMPLETED) {
- dev_warn(&dev->pci_dev->dev,
+ dev_warn(nvmeq->q_dmadev,
"completed id %d twice on queue %d\n",
cqe->command_id, le16_to_cpup(&cqe->sq_id));
return;
}
if (ctx == CMD_CTX_INVALID) {
- dev_warn(&dev->pci_dev->dev,
+ dev_warn(nvmeq->q_dmadev,
"invalid id %d completed on queue %d\n",
cqe->command_id, le16_to_cpup(&cqe->sq_id));
return;
}
- dev_warn(&dev->pci_dev->dev, "Unknown special completion %p\n", ctx);
+ dev_warn(nvmeq->q_dmadev, "Unknown special completion %p\n", ctx);
}
-static void async_completion(struct nvme_dev *dev, void *ctx,
+static void async_completion(struct nvme_queue *nvmeq, void *ctx,
struct nvme_completion *cqe)
{
struct async_cmd_info *cmdinfo = ctx;
return ctx;
}
-struct nvme_queue *get_nvmeq(struct nvme_dev *dev)
+static struct nvme_queue *raw_nvmeq(struct nvme_dev *dev, int qid)
+{
+ return rcu_dereference_raw(dev->queues[qid]);
+}
+
+static struct nvme_queue *get_nvmeq(struct nvme_dev *dev) __acquires(RCU)
+{
+ unsigned queue_id = get_cpu_var(*dev->io_queue);
+ rcu_read_lock();
+ return rcu_dereference(dev->queues[queue_id]);
+}
+
+static void put_nvmeq(struct nvme_queue *nvmeq) __releases(RCU)
{
- return dev->queues[get_cpu() + 1];
+ rcu_read_unlock();
+ put_cpu_var(nvmeq->dev->io_queue);
}
-void put_nvmeq(struct nvme_queue *nvmeq)
+static struct nvme_queue *lock_nvmeq(struct nvme_dev *dev, int q_idx)
+ __acquires(RCU)
{
- put_cpu();
+ rcu_read_lock();
+ return rcu_dereference(dev->queues[q_idx]);
+}
+
+static void unlock_nvmeq(struct nvme_queue *nvmeq) __releases(RCU)
+{
+ rcu_read_unlock();
}
/**
unsigned long flags;
u16 tail;
spin_lock_irqsave(&nvmeq->q_lock, flags);
+ if (nvmeq->q_suspended) {
+ spin_unlock_irqrestore(&nvmeq->q_lock, flags);
+ return -EBUSY;
+ }
tail = nvmeq->sq_tail;
memcpy(&nvmeq->sq_cmds[tail], cmd, sizeof(*cmd));
if (++tail == nvmeq->q_depth)
iod->npages = -1;
iod->length = nbytes;
iod->nents = 0;
+ iod->first_dma = 0ULL;
iod->start_time = jiffies;
}
part_stat_unlock();
}
-static void bio_completion(struct nvme_dev *dev, void *ctx,
+static void bio_completion(struct nvme_queue *nvmeq, void *ctx,
struct nvme_completion *cqe)
{
struct nvme_iod *iod = ctx;
struct bio *bio = iod->private;
u16 status = le16_to_cpup(&cqe->status) >> 1;
+ if (unlikely(status)) {
+ if (!(status & NVME_SC_DNR ||
+ bio->bi_rw & REQ_FAILFAST_MASK) &&
+ (jiffies - iod->start_time) < IOD_TIMEOUT) {
+ if (!waitqueue_active(&nvmeq->sq_full))
+ add_wait_queue(&nvmeq->sq_full,
+ &nvmeq->sq_cong_wait);
+ list_add_tail(&iod->node, &nvmeq->iod_bio);
+ wake_up(&nvmeq->sq_full);
+ return;
+ }
+ }
if (iod->nents) {
- dma_unmap_sg(&dev->pci_dev->dev, iod->sg, iod->nents,
+ dma_unmap_sg(nvmeq->q_dmadev, iod->sg, iod->nents,
bio_data_dir(bio) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
nvme_end_io_acct(bio, iod->start_time);
}
- nvme_free_iod(dev, iod);
+ nvme_free_iod(nvmeq->dev, iod);
if (status)
bio_endio(bio, -EIO);
else
}
/* length is in bytes. gfp flags indicates whether we may sleep. */
-int nvme_setup_prps(struct nvme_dev *dev, struct nvme_common_command *cmd,
- struct nvme_iod *iod, int total_len, gfp_t gfp)
+int nvme_setup_prps(struct nvme_dev *dev, struct nvme_iod *iod, int total_len,
+ gfp_t gfp)
{
struct dma_pool *pool;
int length = total_len;
dma_addr_t prp_dma;
int nprps, i;
- cmd->prp1 = cpu_to_le64(dma_addr);
length -= (PAGE_SIZE - offset);
if (length <= 0)
return total_len;
}
if (length <= PAGE_SIZE) {
- cmd->prp2 = cpu_to_le64(dma_addr);
+ iod->first_dma = dma_addr;
return total_len;
}
prp_list = dma_pool_alloc(pool, gfp, &prp_dma);
if (!prp_list) {
- cmd->prp2 = cpu_to_le64(dma_addr);
+ iod->first_dma = dma_addr;
iod->npages = -1;
return (total_len - length) + PAGE_SIZE;
}
list[0] = prp_list;
iod->first_dma = prp_dma;
- cmd->prp2 = cpu_to_le64(prp_dma);
i = 0;
for (;;) {
if (i == PAGE_SIZE / 8) {
bio_chain(split, bio);
- if (bio_list_empty(&nvmeq->sq_cong))
+ if (!waitqueue_active(&nvmeq->sq_full))
add_wait_queue(&nvmeq->sq_full, &nvmeq->sq_cong_wait);
bio_list_add(&nvmeq->sq_cong, split);
bio_list_add(&nvmeq->sq_cong, bio);
+ wake_up(&nvmeq->sq_full);
return 0;
}
return length;
}
-/*
- * We reuse the small pool to allocate the 16-byte range here as it is not
- * worth having a special pool for these or additional cases to handle freeing
- * the iod.
- */
static int nvme_submit_discard(struct nvme_queue *nvmeq, struct nvme_ns *ns,
struct bio *bio, struct nvme_iod *iod, int cmdid)
{
- struct nvme_dsm_range *range;
+ struct nvme_dsm_range *range =
+ (struct nvme_dsm_range *)iod_list(iod)[0];
struct nvme_command *cmnd = &nvmeq->sq_cmds[nvmeq->sq_tail];
- range = dma_pool_alloc(nvmeq->dev->prp_small_pool, GFP_ATOMIC,
- &iod->first_dma);
- if (!range)
- return -ENOMEM;
-
- iod_list(iod)[0] = (__le64 *)range;
- iod->npages = 0;
-
range->cattr = cpu_to_le32(0);
range->nlb = cpu_to_le32(bio->bi_iter.bi_size >> ns->lba_shift);
range->slba = cpu_to_le64(nvme_block_nr(ns, bio->bi_iter.bi_sector));
return nvme_submit_flush(nvmeq, ns, cmdid);
}
-/*
- * Called with local interrupts disabled and the q_lock held. May not sleep.
- */
-static int nvme_submit_bio_queue(struct nvme_queue *nvmeq, struct nvme_ns *ns,
- struct bio *bio)
+static int nvme_submit_iod(struct nvme_queue *nvmeq, struct nvme_iod *iod)
{
+ struct bio *bio = iod->private;
+ struct nvme_ns *ns = bio->bi_bdev->bd_disk->private_data;
struct nvme_command *cmnd;
- struct nvme_iod *iod;
- enum dma_data_direction dma_dir;
- int cmdid, length, result;
+ int cmdid;
u16 control;
u32 dsmgmt;
- int psegs = bio_phys_segments(ns->queue, bio);
-
- if ((bio->bi_rw & REQ_FLUSH) && psegs) {
- result = nvme_submit_flush_data(nvmeq, ns);
- if (result)
- return result;
- }
- result = -ENOMEM;
- iod = nvme_alloc_iod(psegs, bio->bi_iter.bi_size, GFP_ATOMIC);
- if (!iod)
- goto nomem;
- iod->private = bio;
-
- result = -EBUSY;
cmdid = alloc_cmdid(nvmeq, iod, bio_completion, NVME_IO_TIMEOUT);
if (unlikely(cmdid < 0))
- goto free_iod;
+ return cmdid;
- if (bio->bi_rw & REQ_DISCARD) {
- result = nvme_submit_discard(nvmeq, ns, bio, iod, cmdid);
- if (result)
- goto free_cmdid;
- return result;
- }
- if ((bio->bi_rw & REQ_FLUSH) && !psegs)
+ if (bio->bi_rw & REQ_DISCARD)
+ return nvme_submit_discard(nvmeq, ns, bio, iod, cmdid);
+ if ((bio->bi_rw & REQ_FLUSH) && !iod->nents)
return nvme_submit_flush(nvmeq, ns, cmdid);
control = 0;
dsmgmt |= NVME_RW_DSM_FREQ_PREFETCH;
cmnd = &nvmeq->sq_cmds[nvmeq->sq_tail];
-
memset(cmnd, 0, sizeof(*cmnd));
- if (bio_data_dir(bio)) {
- cmnd->rw.opcode = nvme_cmd_write;
- dma_dir = DMA_TO_DEVICE;
- } else {
- cmnd->rw.opcode = nvme_cmd_read;
- dma_dir = DMA_FROM_DEVICE;
- }
-
- result = nvme_map_bio(nvmeq, iod, bio, dma_dir, psegs);
- if (result <= 0)
- goto free_cmdid;
- length = result;
+ cmnd->rw.opcode = bio_data_dir(bio) ? nvme_cmd_write : nvme_cmd_read;
cmnd->rw.command_id = cmdid;
cmnd->rw.nsid = cpu_to_le32(ns->ns_id);
- length = nvme_setup_prps(nvmeq->dev, &cmnd->common, iod, length,
- GFP_ATOMIC);
+ cmnd->rw.prp1 = cpu_to_le64(sg_dma_address(iod->sg));
+ cmnd->rw.prp2 = cpu_to_le64(iod->first_dma);
cmnd->rw.slba = cpu_to_le64(nvme_block_nr(ns, bio->bi_iter.bi_sector));
- cmnd->rw.length = cpu_to_le16((length >> ns->lba_shift) - 1);
+ cmnd->rw.length =
+ cpu_to_le16((bio->bi_iter.bi_size >> ns->lba_shift) - 1);
cmnd->rw.control = cpu_to_le16(control);
cmnd->rw.dsmgmt = cpu_to_le32(dsmgmt);
- nvme_start_io_acct(bio);
if (++nvmeq->sq_tail == nvmeq->q_depth)
nvmeq->sq_tail = 0;
writel(nvmeq->sq_tail, nvmeq->q_db);
return 0;
+}
+
+/*
+ * Called with local interrupts disabled and the q_lock held. May not sleep.
+ */
+static int nvme_submit_bio_queue(struct nvme_queue *nvmeq, struct nvme_ns *ns,
+ struct bio *bio)
+{
+ struct nvme_iod *iod;
+ int psegs = bio_phys_segments(ns->queue, bio);
+ int result;
+
+ if ((bio->bi_rw & REQ_FLUSH) && psegs) {
+ result = nvme_submit_flush_data(nvmeq, ns);
+ if (result)
+ return result;
+ }
+
+ iod = nvme_alloc_iod(psegs, bio->bi_iter.bi_size, GFP_ATOMIC);
+ if (!iod)
+ return -ENOMEM;
+
+ iod->private = bio;
+ if (bio->bi_rw & REQ_DISCARD) {
+ void *range;
+ /*
+ * We reuse the small pool to allocate the 16-byte range here
+ * as it is not worth having a special pool for these or
+ * additional cases to handle freeing the iod.
+ */
+ range = dma_pool_alloc(nvmeq->dev->prp_small_pool,
+ GFP_ATOMIC,
+ &iod->first_dma);
+ if (!range) {
+ result = -ENOMEM;
+ goto free_iod;
+ }
+ iod_list(iod)[0] = (__le64 *)range;
+ iod->npages = 0;
+ } else if (psegs) {
+ result = nvme_map_bio(nvmeq, iod, bio,
+ bio_data_dir(bio) ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
+ psegs);
+ if (result <= 0)
+ goto free_iod;
+ if (nvme_setup_prps(nvmeq->dev, iod, result, GFP_ATOMIC) !=
+ result) {
+ result = -ENOMEM;
+ goto free_iod;
+ }
+ nvme_start_io_acct(bio);
+ }
+ if (unlikely(nvme_submit_iod(nvmeq, iod))) {
+ if (!waitqueue_active(&nvmeq->sq_full))
+ add_wait_queue(&nvmeq->sq_full, &nvmeq->sq_cong_wait);
+ list_add_tail(&iod->node, &nvmeq->iod_bio);
+ }
+ return 0;
- free_cmdid:
- free_cmdid(nvmeq, cmdid, NULL);
free_iod:
nvme_free_iod(nvmeq->dev, iod);
- nomem:
return result;
}
}
ctx = free_cmdid(nvmeq, cqe.command_id, &fn);
- fn(nvmeq->dev, ctx, &cqe);
+ fn(nvmeq, ctx, &cqe);
}
/* If the controller ignores the cq head doorbell and continuously
if (!nvmeq->q_suspended && bio_list_empty(&nvmeq->sq_cong))
result = nvme_submit_bio_queue(nvmeq, ns, bio);
if (unlikely(result)) {
- if (bio_list_empty(&nvmeq->sq_cong))
+ if (!waitqueue_active(&nvmeq->sq_full))
add_wait_queue(&nvmeq->sq_full, &nvmeq->sq_cong_wait);
bio_list_add(&nvmeq->sq_cong, bio);
}
int status;
};
-static void sync_completion(struct nvme_dev *dev, void *ctx,
+static void sync_completion(struct nvme_queue *nvmeq, void *ctx,
struct nvme_completion *cqe)
{
struct sync_cmd_info *cmdinfo = ctx;
* Returns 0 on success. If the result is negative, it's a Linux error code;
* if the result is positive, it's an NVM Express status code
*/
-int nvme_submit_sync_cmd(struct nvme_queue *nvmeq, struct nvme_command *cmd,
+static int nvme_submit_sync_cmd(struct nvme_dev *dev, int q_idx,
+ struct nvme_command *cmd,
u32 *result, unsigned timeout)
{
- int cmdid;
+ int cmdid, ret;
struct sync_cmd_info cmdinfo;
+ struct nvme_queue *nvmeq;
+
+ nvmeq = lock_nvmeq(dev, q_idx);
+ if (!nvmeq) {
+ unlock_nvmeq(nvmeq);
+ return -ENODEV;
+ }
cmdinfo.task = current;
cmdinfo.status = -EINTR;
- cmdid = alloc_cmdid_killable(nvmeq, &cmdinfo, sync_completion,
- timeout);
- if (cmdid < 0)
+ cmdid = alloc_cmdid(nvmeq, &cmdinfo, sync_completion, timeout);
+ if (cmdid < 0) {
+ unlock_nvmeq(nvmeq);
return cmdid;
+ }
cmd->common.command_id = cmdid;
set_current_state(TASK_KILLABLE);
- nvme_submit_cmd(nvmeq, cmd);
+ ret = nvme_submit_cmd(nvmeq, cmd);
+ if (ret) {
+ free_cmdid(nvmeq, cmdid, NULL);
+ unlock_nvmeq(nvmeq);
+ set_current_state(TASK_RUNNING);
+ return ret;
+ }
+ unlock_nvmeq(nvmeq);
schedule_timeout(timeout);
if (cmdinfo.status == -EINTR) {
- nvme_abort_command(nvmeq, cmdid);
+ nvmeq = lock_nvmeq(dev, q_idx);
+ if (nvmeq)
+ nvme_abort_command(nvmeq, cmdid);
+ unlock_nvmeq(nvmeq);
return -EINTR;
}
return cmdid;
cmdinfo->status = -EINTR;
cmd->common.command_id = cmdid;
- nvme_submit_cmd(nvmeq, cmd);
- return 0;
+ return nvme_submit_cmd(nvmeq, cmd);
}
int nvme_submit_admin_cmd(struct nvme_dev *dev, struct nvme_command *cmd,
u32 *result)
{
- return nvme_submit_sync_cmd(dev->queues[0], cmd, result, ADMIN_TIMEOUT);
+ return nvme_submit_sync_cmd(dev, 0, cmd, result, ADMIN_TIMEOUT);
+}
+
+int nvme_submit_io_cmd(struct nvme_dev *dev, struct nvme_command *cmd,
+ u32 *result)
+{
+ return nvme_submit_sync_cmd(dev, smp_processor_id() + 1, cmd, result,
+ NVME_IO_TIMEOUT);
}
static int nvme_submit_admin_cmd_async(struct nvme_dev *dev,
struct nvme_command *cmd, struct async_cmd_info *cmdinfo)
{
- return nvme_submit_async_cmd(dev->queues[0], cmd, cmdinfo,
+ return nvme_submit_async_cmd(raw_nvmeq(dev, 0), cmd, cmdinfo,
ADMIN_TIMEOUT);
}
struct nvme_command cmd;
struct nvme_dev *dev = nvmeq->dev;
struct nvme_cmd_info *info = nvme_cmd_info(nvmeq);
+ struct nvme_queue *adminq;
if (!nvmeq->qid || info[cmdid].aborted) {
if (work_busy(&dev->reset_work))
if (!dev->abort_limit)
return;
- a_cmdid = alloc_cmdid(dev->queues[0], CMD_CTX_ABORT, special_completion,
+ adminq = rcu_dereference(dev->queues[0]);
+ a_cmdid = alloc_cmdid(adminq, CMD_CTX_ABORT, special_completion,
ADMIN_TIMEOUT);
if (a_cmdid < 0)
return;
dev_warn(nvmeq->q_dmadev, "Aborting I/O %d QID %d\n", cmdid,
nvmeq->qid);
- nvme_submit_cmd(dev->queues[0], &cmd);
+ nvme_submit_cmd(adminq, &cmd);
}
/**
dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d QID %d\n", cmdid,
nvmeq->qid);
ctx = cancel_cmdid(nvmeq, cmdid, &fn);
- fn(nvmeq->dev, ctx, &cqe);
+ fn(nvmeq, ctx, &cqe);
}
}
-static void nvme_free_queue(struct nvme_queue *nvmeq)
+static void nvme_free_queue(struct rcu_head *r)
{
+ struct nvme_queue *nvmeq = container_of(r, struct nvme_queue, r_head);
+
spin_lock_irq(&nvmeq->q_lock);
while (bio_list_peek(&nvmeq->sq_cong)) {
struct bio *bio = bio_list_pop(&nvmeq->sq_cong);
bio_endio(bio, -EIO);
}
+ while (!list_empty(&nvmeq->iod_bio)) {
+ static struct nvme_completion cqe = {
+ .status = cpu_to_le16(
+ (NVME_SC_ABORT_REQ | NVME_SC_DNR) << 1),
+ };
+ struct nvme_iod *iod = list_first_entry(&nvmeq->iod_bio,
+ struct nvme_iod,
+ node);
+ list_del(&iod->node);
+ bio_completion(nvmeq, iod, &cqe);
+ }
spin_unlock_irq(&nvmeq->q_lock);
dma_free_coherent(nvmeq->q_dmadev, CQ_SIZE(nvmeq->q_depth),
(void *)nvmeq->cqes, nvmeq->cq_dma_addr);
dma_free_coherent(nvmeq->q_dmadev, SQ_SIZE(nvmeq->q_depth),
nvmeq->sq_cmds, nvmeq->sq_dma_addr);
+ if (nvmeq->qid)
+ free_cpumask_var(nvmeq->cpu_mask);
kfree(nvmeq);
}
int i;
for (i = dev->queue_count - 1; i >= lowest; i--) {
- nvme_free_queue(dev->queues[i]);
+ struct nvme_queue *nvmeq = raw_nvmeq(dev, i);
+ rcu_assign_pointer(dev->queues[i], NULL);
+ call_rcu(&nvmeq->r_head, nvme_free_queue);
dev->queue_count--;
- dev->queues[i] = NULL;
}
}
return 1;
}
nvmeq->q_suspended = 1;
+ nvmeq->dev->online_queues--;
spin_unlock_irq(&nvmeq->q_lock);
irq_set_affinity_hint(vector, NULL);
static void nvme_disable_queue(struct nvme_dev *dev, int qid)
{
- struct nvme_queue *nvmeq = dev->queues[qid];
+ struct nvme_queue *nvmeq = raw_nvmeq(dev, qid);
if (!nvmeq)
return;
if (!nvmeq->sq_cmds)
goto free_cqdma;
+ if (qid && !zalloc_cpumask_var(&nvmeq->cpu_mask, GFP_KERNEL))
+ goto free_sqdma;
+
nvmeq->q_dmadev = dmadev;
nvmeq->dev = dev;
snprintf(nvmeq->irqname, sizeof(nvmeq->irqname), "nvme%dq%d",
init_waitqueue_head(&nvmeq->sq_full);
init_waitqueue_entry(&nvmeq->sq_cong_wait, nvme_thread);
bio_list_init(&nvmeq->sq_cong);
+ INIT_LIST_HEAD(&nvmeq->iod_bio);
nvmeq->q_db = &dev->dbs[qid * 2 * dev->db_stride];
nvmeq->q_depth = depth;
nvmeq->cq_vector = vector;
nvmeq->qid = qid;
nvmeq->q_suspended = 1;
dev->queue_count++;
+ rcu_assign_pointer(dev->queues[qid], nvmeq);
return nvmeq;
+ free_sqdma:
+ dma_free_coherent(dmadev, SQ_SIZE(depth), (void *)nvmeq->sq_cmds,
+ nvmeq->sq_dma_addr);
free_cqdma:
dma_free_coherent(dmadev, CQ_SIZE(depth), (void *)nvmeq->cqes,
nvmeq->cq_dma_addr);
memset((void *)nvmeq->cqes, 0, CQ_SIZE(nvmeq->q_depth));
nvme_cancel_ios(nvmeq, false);
nvmeq->q_suspended = 0;
+ dev->online_queues++;
}
static int nvme_create_queue(struct nvme_queue *nvmeq, int qid)
if (result < 0)
return result;
- nvmeq = dev->queues[0];
+ nvmeq = raw_nvmeq(dev, 0);
if (!nvmeq) {
nvmeq = nvme_alloc_queue(dev, 0, 64, 0);
if (!nvmeq)
return -ENOMEM;
- dev->queues[0] = nvmeq;
}
aqa = nvmeq->q_depth - 1;
static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio)
{
struct nvme_dev *dev = ns->dev;
- struct nvme_queue *nvmeq;
struct nvme_user_io io;
struct nvme_command c;
unsigned length, meta_len;
c.rw.metadata = cpu_to_le64(meta_dma_addr);
}
- length = nvme_setup_prps(dev, &c.common, iod, length, GFP_KERNEL);
+ length = nvme_setup_prps(dev, iod, length, GFP_KERNEL);
+ c.rw.prp1 = cpu_to_le64(sg_dma_address(iod->sg));
+ c.rw.prp2 = cpu_to_le64(iod->first_dma);
- nvmeq = get_nvmeq(dev);
- /*
- * Since nvme_submit_sync_cmd sleeps, we can't keep preemption
- * disabled. We may be preempted at any point, and be rescheduled
- * to a different CPU. That will cause cacheline bouncing, but no
- * additional races since q_lock already protects against other CPUs.
- */
- put_nvmeq(nvmeq);
if (length != (io.nblocks + 1) << ns->lba_shift)
status = -ENOMEM;
- else if (!nvmeq || nvmeq->q_suspended)
- status = -EBUSY;
else
- status = nvme_submit_sync_cmd(nvmeq, &c, NULL, NVME_IO_TIMEOUT);
+ status = nvme_submit_io_cmd(dev, &c, NULL);
if (meta_len) {
if (status == NVME_SC_SUCCESS && !(io.opcode & 1)) {
length);
if (IS_ERR(iod))
return PTR_ERR(iod);
- length = nvme_setup_prps(dev, &c.common, iod, length,
- GFP_KERNEL);
+ length = nvme_setup_prps(dev, iod, length, GFP_KERNEL);
+ c.common.prp1 = cpu_to_le64(sg_dma_address(iod->sg));
+ c.common.prp2 = cpu_to_le64(iod->first_dma);
}
timeout = cmd.timeout_ms ? msecs_to_jiffies(cmd.timeout_ms) :
if (length != cmd.data_len)
status = -ENOMEM;
else
- status = nvme_submit_sync_cmd(dev->queues[0], &c, &cmd.result,
- timeout);
+ status = nvme_submit_sync_cmd(dev, 0, &c, &cmd.result, timeout);
if (cmd.data_len) {
nvme_unmap_user_pages(dev, cmd.opcode & 1, iod);
kref_put(&dev->kref, nvme_free_dev);
}
+static int nvme_getgeo(struct block_device *bd, struct hd_geometry *geo)
+{
+ /* some standard values */
+ geo->heads = 1 << 6;
+ geo->sectors = 1 << 5;
+ geo->cylinders = get_capacity(bd->bd_disk) >> 11;
+ return 0;
+}
+
static const struct block_device_operations nvme_fops = {
.owner = THIS_MODULE,
.ioctl = nvme_ioctl,
.compat_ioctl = nvme_compat_ioctl,
.open = nvme_open,
.release = nvme_release,
+ .getgeo = nvme_getgeo,
};
+static void nvme_resubmit_iods(struct nvme_queue *nvmeq)
+{
+ struct nvme_iod *iod, *next;
+
+ list_for_each_entry_safe(iod, next, &nvmeq->iod_bio, node) {
+ if (unlikely(nvme_submit_iod(nvmeq, iod)))
+ break;
+ list_del(&iod->node);
+ if (bio_list_empty(&nvmeq->sq_cong) &&
+ list_empty(&nvmeq->iod_bio))
+ remove_wait_queue(&nvmeq->sq_full,
+ &nvmeq->sq_cong_wait);
+ }
+}
+
static void nvme_resubmit_bios(struct nvme_queue *nvmeq)
{
while (bio_list_peek(&nvmeq->sq_cong)) {
struct bio *bio = bio_list_pop(&nvmeq->sq_cong);
struct nvme_ns *ns = bio->bi_bdev->bd_disk->private_data;
- if (bio_list_empty(&nvmeq->sq_cong))
+ if (bio_list_empty(&nvmeq->sq_cong) &&
+ list_empty(&nvmeq->iod_bio))
remove_wait_queue(&nvmeq->sq_full,
&nvmeq->sq_cong_wait);
if (nvme_submit_bio_queue(nvmeq, ns, bio)) {
- if (bio_list_empty(&nvmeq->sq_cong))
+ if (!waitqueue_active(&nvmeq->sq_full))
add_wait_queue(&nvmeq->sq_full,
&nvmeq->sq_cong_wait);
bio_list_add_head(&nvmeq->sq_cong, bio);
queue_work(nvme_workq, &dev->reset_work);
continue;
}
+ rcu_read_lock();
for (i = 0; i < dev->queue_count; i++) {
- struct nvme_queue *nvmeq = dev->queues[i];
+ struct nvme_queue *nvmeq =
+ rcu_dereference(dev->queues[i]);
if (!nvmeq)
continue;
spin_lock_irq(&nvmeq->q_lock);
nvme_process_cq(nvmeq);
nvme_cancel_ios(nvmeq, true);
nvme_resubmit_bios(nvmeq);
+ nvme_resubmit_iods(nvmeq);
unlock:
spin_unlock_irq(&nvmeq->q_lock);
}
+ rcu_read_unlock();
}
spin_unlock(&dev_list_lock);
schedule_timeout(round_jiffies_relative(HZ));
return NULL;
}
+static int nvme_find_closest_node(int node)
+{
+ int n, val, min_val = INT_MAX, best_node = node;
+
+ for_each_online_node(n) {
+ if (n == node)
+ continue;
+ val = node_distance(node, n);
+ if (val < min_val) {
+ min_val = val;
+ best_node = n;
+ }
+ }
+ return best_node;
+}
+
+static void nvme_set_queue_cpus(cpumask_t *qmask, struct nvme_queue *nvmeq,
+ int count)
+{
+ int cpu;
+ for_each_cpu(cpu, qmask) {
+ if (cpumask_weight(nvmeq->cpu_mask) >= count)
+ break;
+ if (!cpumask_test_and_set_cpu(cpu, nvmeq->cpu_mask))
+ *per_cpu_ptr(nvmeq->dev->io_queue, cpu) = nvmeq->qid;
+ }
+}
+
+static void nvme_add_cpus(cpumask_t *mask, const cpumask_t *unassigned_cpus,
+ const cpumask_t *new_mask, struct nvme_queue *nvmeq, int cpus_per_queue)
+{
+ int next_cpu;
+ for_each_cpu(next_cpu, new_mask) {
+ cpumask_or(mask, mask, get_cpu_mask(next_cpu));
+ cpumask_or(mask, mask, topology_thread_cpumask(next_cpu));
+ cpumask_and(mask, mask, unassigned_cpus);
+ nvme_set_queue_cpus(mask, nvmeq, cpus_per_queue);
+ }
+}
+
+static void nvme_create_io_queues(struct nvme_dev *dev)
+{
+ unsigned i, max;
+
+ max = min(dev->max_qid, num_online_cpus());
+ for (i = dev->queue_count; i <= max; i++)
+ if (!nvme_alloc_queue(dev, i, dev->q_depth, i - 1))
+ break;
+
+ max = min(dev->queue_count - 1, num_online_cpus());
+ for (i = dev->online_queues; i <= max; i++)
+ if (nvme_create_queue(raw_nvmeq(dev, i), i))
+ break;
+}
+
+/*
+ * If there are fewer queues than online cpus, this will try to optimally
+ * assign a queue to multiple cpus by grouping cpus that are "close" together:
+ * thread siblings, core, socket, closest node, then whatever else is
+ * available.
+ */
+static void nvme_assign_io_queues(struct nvme_dev *dev)
+{
+ unsigned cpu, cpus_per_queue, queues, remainder, i;
+ cpumask_var_t unassigned_cpus;
+
+ nvme_create_io_queues(dev);
+
+ queues = min(dev->online_queues - 1, num_online_cpus());
+ if (!queues)
+ return;
+
+ cpus_per_queue = num_online_cpus() / queues;
+ remainder = queues - (num_online_cpus() - queues * cpus_per_queue);
+
+ if (!alloc_cpumask_var(&unassigned_cpus, GFP_KERNEL))
+ return;
+
+ cpumask_copy(unassigned_cpus, cpu_online_mask);
+ cpu = cpumask_first(unassigned_cpus);
+ for (i = 1; i <= queues; i++) {
+ struct nvme_queue *nvmeq = lock_nvmeq(dev, i);
+ cpumask_t mask;
+
+ cpumask_clear(nvmeq->cpu_mask);
+ if (!cpumask_weight(unassigned_cpus)) {
+ unlock_nvmeq(nvmeq);
+ break;
+ }
+
+ mask = *get_cpu_mask(cpu);
+ nvme_set_queue_cpus(&mask, nvmeq, cpus_per_queue);
+ if (cpus_weight(mask) < cpus_per_queue)
+ nvme_add_cpus(&mask, unassigned_cpus,
+ topology_thread_cpumask(cpu),
+ nvmeq, cpus_per_queue);
+ if (cpus_weight(mask) < cpus_per_queue)
+ nvme_add_cpus(&mask, unassigned_cpus,
+ topology_core_cpumask(cpu),
+ nvmeq, cpus_per_queue);
+ if (cpus_weight(mask) < cpus_per_queue)
+ nvme_add_cpus(&mask, unassigned_cpus,
+ cpumask_of_node(cpu_to_node(cpu)),
+ nvmeq, cpus_per_queue);
+ if (cpus_weight(mask) < cpus_per_queue)
+ nvme_add_cpus(&mask, unassigned_cpus,
+ cpumask_of_node(
+ nvme_find_closest_node(
+ cpu_to_node(cpu))),
+ nvmeq, cpus_per_queue);
+ if (cpus_weight(mask) < cpus_per_queue)
+ nvme_add_cpus(&mask, unassigned_cpus,
+ unassigned_cpus,
+ nvmeq, cpus_per_queue);
+
+ WARN(cpumask_weight(nvmeq->cpu_mask) != cpus_per_queue,
+ "nvme%d qid:%d mis-matched queue-to-cpu assignment\n",
+ dev->instance, i);
+
+ irq_set_affinity_hint(dev->entry[nvmeq->cq_vector].vector,
+ nvmeq->cpu_mask);
+ cpumask_andnot(unassigned_cpus, unassigned_cpus,
+ nvmeq->cpu_mask);
+ cpu = cpumask_next(cpu, unassigned_cpus);
+ if (remainder && !--remainder)
+ cpus_per_queue++;
+ unlock_nvmeq(nvmeq);
+ }
+ WARN(cpumask_weight(unassigned_cpus), "nvme%d unassigned online cpus\n",
+ dev->instance);
+ i = 0;
+ cpumask_andnot(unassigned_cpus, cpu_possible_mask, cpu_online_mask);
+ for_each_cpu(cpu, unassigned_cpus)
+ *per_cpu_ptr(dev->io_queue, cpu) = (i++ % queues) + 1;
+ free_cpumask_var(unassigned_cpus);
+}
+
static int set_queue_count(struct nvme_dev *dev, int count)
{
int status;
return 4096 + ((nr_io_queues + 1) * 8 * dev->db_stride);
}
+static int nvme_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ struct nvme_dev *dev = container_of(self, struct nvme_dev, nb);
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_DEAD:
+ nvme_assign_io_queues(dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
static int nvme_setup_io_queues(struct nvme_dev *dev)
{
- struct nvme_queue *adminq = dev->queues[0];
+ struct nvme_queue *adminq = raw_nvmeq(dev, 0);
struct pci_dev *pdev = dev->pci_dev;
- int result, cpu, i, vecs, nr_io_queues, size, q_depth;
+ int result, i, vecs, nr_io_queues, size;
- nr_io_queues = num_online_cpus();
+ nr_io_queues = num_possible_cpus();
result = set_queue_count(dev, nr_io_queues);
if (result < 0)
return result;
size = db_bar_size(dev, nr_io_queues);
} while (1);
dev->dbs = ((void __iomem *)dev->bar) + 4096;
- dev->queues[0]->q_db = dev->dbs;
+ adminq->q_db = dev->dbs;
}
/* Deregister the admin queue's interrupt */
* number of interrupts.
*/
nr_io_queues = vecs;
+ dev->max_qid = nr_io_queues;
result = queue_request_irq(dev, adminq, adminq->irqname);
if (result) {
}
/* Free previously allocated queues that are no longer usable */
- spin_lock(&dev_list_lock);
- for (i = dev->queue_count - 1; i > nr_io_queues; i--) {
- struct nvme_queue *nvmeq = dev->queues[i];
-
- spin_lock_irq(&nvmeq->q_lock);
- nvme_cancel_ios(nvmeq, false);
- spin_unlock_irq(&nvmeq->q_lock);
-
- nvme_free_queue(nvmeq);
- dev->queue_count--;
- dev->queues[i] = NULL;
- }
- spin_unlock(&dev_list_lock);
-
- cpu = cpumask_first(cpu_online_mask);
- for (i = 0; i < nr_io_queues; i++) {
- irq_set_affinity_hint(dev->entry[i].vector, get_cpu_mask(cpu));
- cpu = cpumask_next(cpu, cpu_online_mask);
- }
-
- q_depth = min_t(int, NVME_CAP_MQES(readq(&dev->bar->cap)) + 1,
- NVME_Q_DEPTH);
- for (i = dev->queue_count - 1; i < nr_io_queues; i++) {
- dev->queues[i + 1] = nvme_alloc_queue(dev, i + 1, q_depth, i);
- if (!dev->queues[i + 1]) {
- result = -ENOMEM;
- goto free_queues;
- }
- }
-
- for (; i < num_possible_cpus(); i++) {
- int target = i % rounddown_pow_of_two(dev->queue_count - 1);
- dev->queues[i + 1] = dev->queues[target + 1];
- }
+ nvme_free_queues(dev, nr_io_queues + 1);
+ nvme_assign_io_queues(dev);
- for (i = 1; i < dev->queue_count; i++) {
- result = nvme_create_queue(dev->queues[i], i);
- if (result) {
- for (--i; i > 0; i--)
- nvme_disable_queue(dev, i);
- goto free_queues;
- }
- }
+ dev->nb.notifier_call = &nvme_cpu_notify;
+ result = register_hotcpu_notifier(&dev->nb);
+ if (result)
+ goto free_queues;
return 0;
static int nvme_dev_map(struct nvme_dev *dev)
{
+ u64 cap;
int bars, result = -ENOMEM;
struct pci_dev *pdev = dev->pci_dev;
result = -ENODEV;
goto unmap;
}
- dev->db_stride = 1 << NVME_CAP_STRIDE(readq(&dev->bar->cap));
+ cap = readq(&dev->bar->cap);
+ dev->q_depth = min_t(int, NVME_CAP_MQES(cap) + 1, NVME_Q_DEPTH);
+ dev->db_stride = 1 << NVME_CAP_STRIDE(cap);
dev->dbs = ((void __iomem *)dev->bar) + 4096;
return 0;
atomic_set(&dq.refcount, 0);
dq.worker = &worker;
for (i = dev->queue_count - 1; i > 0; i--) {
- struct nvme_queue *nvmeq = dev->queues[i];
+ struct nvme_queue *nvmeq = raw_nvmeq(dev, i);
if (nvme_suspend_queue(nvmeq))
continue;
kthread_stop(kworker_task);
}
+/*
+* Remove the node from the device list and check
+* for whether or not we need to stop the nvme_thread.
+*/
+static void nvme_dev_list_remove(struct nvme_dev *dev)
+{
+ struct task_struct *tmp = NULL;
+
+ spin_lock(&dev_list_lock);
+ list_del_init(&dev->node);
+ if (list_empty(&dev_list) && !IS_ERR_OR_NULL(nvme_thread)) {
+ tmp = nvme_thread;
+ nvme_thread = NULL;
+ }
+ spin_unlock(&dev_list_lock);
+
+ if (tmp)
+ kthread_stop(tmp);
+}
+
static void nvme_dev_shutdown(struct nvme_dev *dev)
{
int i;
dev->initialized = 0;
+ unregister_hotcpu_notifier(&dev->nb);
- spin_lock(&dev_list_lock);
- list_del_init(&dev->node);
- spin_unlock(&dev_list_lock);
+ nvme_dev_list_remove(dev);
if (!dev->bar || (dev->bar && readl(&dev->bar->csts) == -1)) {
for (i = dev->queue_count - 1; i >= 0; i--) {
- struct nvme_queue *nvmeq = dev->queues[i];
+ struct nvme_queue *nvmeq = raw_nvmeq(dev, i);
nvme_suspend_queue(nvmeq);
nvme_clear_queue(nvmeq);
}
struct nvme_dev *dev = container_of(kref, struct nvme_dev, kref);
nvme_free_namespaces(dev);
+ free_percpu(dev->io_queue);
kfree(dev->queues);
kfree(dev->entry);
kfree(dev);
static int nvme_dev_start(struct nvme_dev *dev)
{
int result;
+ bool start_thread = false;
result = nvme_dev_map(dev);
if (result)
goto unmap;
spin_lock(&dev_list_lock);
+ if (list_empty(&dev_list) && IS_ERR_OR_NULL(nvme_thread)) {
+ start_thread = true;
+ nvme_thread = NULL;
+ }
list_add(&dev->node, &dev_list);
spin_unlock(&dev_list_lock);
+ if (start_thread) {
+ nvme_thread = kthread_run(nvme_kthread, NULL, "nvme");
+ wake_up(&nvme_kthread_wait);
+ } else
+ wait_event_killable(nvme_kthread_wait, nvme_thread);
+
+ if (IS_ERR_OR_NULL(nvme_thread)) {
+ result = nvme_thread ? PTR_ERR(nvme_thread) : -EINTR;
+ goto disable;
+ }
+
result = nvme_setup_io_queues(dev);
if (result && result != -EBUSY)
goto disable;
disable:
nvme_disable_queue(dev, 0);
- spin_lock(&dev_list_lock);
- list_del_init(&dev->node);
- spin_unlock(&dev_list_lock);
+ nvme_dev_list_remove(dev);
unmap:
nvme_dev_unmap(dev);
return result;
static void nvme_remove_disks(struct work_struct *ws)
{
- int i;
struct nvme_dev *dev = container_of(ws, struct nvme_dev, reset_work);
nvme_dev_remove(dev);
- spin_lock(&dev_list_lock);
- for (i = dev->queue_count - 1; i > 0; i--) {
- BUG_ON(!dev->queues[i] || !dev->queues[i]->q_suspended);
- nvme_free_queue(dev->queues[i]);
- dev->queue_count--;
- dev->queues[i] = NULL;
- }
- spin_unlock(&dev_list_lock);
+ nvme_free_queues(dev, 1);
}
static int nvme_dev_resume(struct nvme_dev *dev)
GFP_KERNEL);
if (!dev->queues)
goto free;
+ dev->io_queue = alloc_percpu(unsigned short);
+ if (!dev->io_queue)
+ goto free;
INIT_LIST_HEAD(&dev->namespaces);
dev->reset_workfn = nvme_reset_failed_dev;
if (result)
goto release;
+ kref_init(&dev->kref);
result = nvme_dev_start(dev);
if (result) {
if (result == -EBUSY)
goto release_pools;
}
- kref_init(&dev->kref);
result = nvme_dev_add(dev);
if (result)
goto shutdown;
release:
nvme_release_instance(dev);
free:
+ free_percpu(dev->io_queue);
kfree(dev->queues);
kfree(dev->entry);
kfree(dev);
nvme_dev_remove(dev);
nvme_dev_shutdown(dev);
nvme_free_queues(dev, 0);
+ rcu_barrier();
nvme_release_instance(dev);
nvme_release_prp_pools(dev);
kref_put(&dev->kref, nvme_free_dev);
#define nvme_slot_reset NULL
#define nvme_error_resume NULL
+#ifdef CONFIG_PM_SLEEP
static int nvme_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
}
return 0;
}
+#endif
static SIMPLE_DEV_PM_OPS(nvme_dev_pm_ops, nvme_suspend, nvme_resume);
/* Move to pci_ids.h later */
#define PCI_CLASS_STORAGE_EXPRESS 0x010802
-static DEFINE_PCI_DEVICE_TABLE(nvme_id_table) = {
+static const struct pci_device_id nvme_id_table[] = {
{ PCI_DEVICE_CLASS(PCI_CLASS_STORAGE_EXPRESS, 0xffffff) },
{ 0, }
};
{
int result;
- nvme_thread = kthread_run(nvme_kthread, NULL, "nvme");
- if (IS_ERR(nvme_thread))
- return PTR_ERR(nvme_thread);
+ init_waitqueue_head(&nvme_kthread_wait);
- result = -ENOMEM;
nvme_workq = create_singlethread_workqueue("nvme");
if (!nvme_workq)
- goto kill_kthread;
+ return -ENOMEM;
result = register_blkdev(nvme_major, "nvme");
if (result < 0)
unregister_blkdev(nvme_major, "nvme");
kill_workq:
destroy_workqueue(nvme_workq);
- kill_kthread:
- kthread_stop(nvme_thread);
return result;
}
pci_unregister_driver(&nvme_driver);
unregister_blkdev(nvme_major, "nvme");
destroy_workqueue(nvme_workq);
- kthread_stop(nvme_thread);
+ BUG_ON(nvme_thread && !IS_ERR(nvme_thread));
}
MODULE_AUTHOR("Matthew Wilcox <willy@linux.intel.com>");
MODULE_LICENSE("GPL");
-MODULE_VERSION("0.8");
+MODULE_VERSION("0.9");
module_init(nvme_init);
module_exit(nvme_exit);
res = PTR_ERR(iod);
goto out;
}
- length = nvme_setup_prps(dev, &c.common, iod, tot_len,
- GFP_KERNEL);
+ length = nvme_setup_prps(dev, iod, tot_len, GFP_KERNEL);
if (length != tot_len) {
res = -ENOMEM;
goto out_unmap;
}
+ c.dlfw.prp1 = cpu_to_le64(sg_dma_address(iod->sg));
+ c.dlfw.prp2 = cpu_to_le64(iod->first_dma);
c.dlfw.numd = cpu_to_le32((tot_len/BYTES_TO_DWORDS) - 1);
c.dlfw.offset = cpu_to_le32(offset/BYTES_TO_DWORDS);
} else if (opcode == nvme_admin_activate_fw) {
int res = SNTI_TRANSLATION_SUCCESS;
int nvme_sc;
struct nvme_dev *dev = ns->dev;
- struct nvme_queue *nvmeq;
u32 num_cmds;
struct nvme_iod *iod;
u64 unit_len;
struct nvme_command c;
u8 opcode = (is_write ? nvme_cmd_write : nvme_cmd_read);
u16 control;
- u32 max_blocks = nvme_block_nr(ns, dev->max_hw_sectors);
+ u32 max_blocks = queue_max_hw_sectors(ns->queue);
num_cmds = nvme_trans_io_get_num_cmds(hdr, cdb_info, max_blocks);
res = PTR_ERR(iod);
goto out;
}
- retcode = nvme_setup_prps(dev, &c.common, iod, unit_len,
- GFP_KERNEL);
+ retcode = nvme_setup_prps(dev, iod, unit_len, GFP_KERNEL);
if (retcode != unit_len) {
nvme_unmap_user_pages(dev,
(is_write) ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
res = -ENOMEM;
goto out;
}
+ c.rw.prp1 = cpu_to_le64(sg_dma_address(iod->sg));
+ c.rw.prp2 = cpu_to_le64(iod->first_dma);
nvme_offset += unit_num_blocks;
- nvmeq = get_nvmeq(dev);
- /*
- * Since nvme_submit_sync_cmd sleeps, we can't keep
- * preemption disabled. We may be preempted at any
- * point, and be rescheduled to a different CPU. That
- * will cause cacheline bouncing, but no additional
- * races since q_lock already protects against other
- * CPUs.
- */
- put_nvmeq(nvmeq);
- nvme_sc = nvme_submit_sync_cmd(nvmeq, &c, NULL,
- NVME_IO_TIMEOUT);
+ nvme_sc = nvme_submit_io_cmd(dev, &c, NULL);
if (nvme_sc != NVME_SC_SUCCESS) {
nvme_unmap_user_pages(dev,
(is_write) ? DMA_TO_DEVICE : DMA_FROM_DEVICE,
{
int res = SNTI_TRANSLATION_SUCCESS;
int nvme_sc;
- struct nvme_queue *nvmeq;
struct nvme_command c;
u8 immed, pcmod, pc, no_flush, start;
c.common.opcode = nvme_cmd_flush;
c.common.nsid = cpu_to_le32(ns->ns_id);
- nvmeq = get_nvmeq(ns->dev);
- put_nvmeq(nvmeq);
- nvme_sc = nvme_submit_sync_cmd(nvmeq, &c, NULL, NVME_IO_TIMEOUT);
-
+ nvme_sc = nvme_submit_io_cmd(ns->dev, &c, NULL);
res = nvme_trans_status_code(hdr, nvme_sc);
if (res)
goto out;
int res = SNTI_TRANSLATION_SUCCESS;
int nvme_sc;
struct nvme_command c;
- struct nvme_queue *nvmeq;
memset(&c, 0, sizeof(c));
c.common.opcode = nvme_cmd_flush;
c.common.nsid = cpu_to_le32(ns->ns_id);
- nvmeq = get_nvmeq(ns->dev);
- put_nvmeq(nvmeq);
- nvme_sc = nvme_submit_sync_cmd(nvmeq, &c, NULL, NVME_IO_TIMEOUT);
+ nvme_sc = nvme_submit_io_cmd(ns->dev, &c, NULL);
res = nvme_trans_status_code(hdr, nvme_sc);
if (res)
struct nvme_dev *dev = ns->dev;
struct scsi_unmap_parm_list *plist;
struct nvme_dsm_range *range;
- struct nvme_queue *nvmeq;
struct nvme_command c;
int i, nvme_sc, res = -ENOMEM;
u16 ndesc, list_len;
c.dsm.nr = cpu_to_le32(ndesc - 1);
c.dsm.attributes = cpu_to_le32(NVME_DSMGMT_AD);
- nvmeq = get_nvmeq(dev);
- put_nvmeq(nvmeq);
-
- nvme_sc = nvme_submit_sync_cmd(nvmeq, &c, NULL, NVME_IO_TIMEOUT);
+ nvme_sc = nvme_submit_io_cmd(dev, &c, NULL);
res = nvme_trans_status_code(hdr, nvme_sc);
dma_free_coherent(&dev->pci_dev->dev, ndesc * sizeof(*range),
config SONYPI
tristate "Sony Vaio Programmable I/O Control Device support"
- depends on X86 && PCI && INPUT && !64BIT
+ depends on X86_32 && PCI && INPUT
---help---
This driver enables access to the Sony Programmable I/O Control
Device which can be found in many (all ?) Sony Vaio laptops.
if (len + offset > PAGE_SIZE)
len = PAGE_SIZE - offset;
- src = buf->ops->map(pipe, buf, 1);
+ src = kmap_atomic(buf->page);
memcpy(page_address(page) + offset, src + buf->offset, len);
- buf->ops->unmap(pipe, buf, src);
+ kunmap_atomic(src);
sg_set_page(&(sgl->sg[sgl->n]), page, len, offset);
}
config ARM_EXYNOS4210_CPUFREQ
bool "SAMSUNG EXYNOS4210"
- depends on CPU_EXYNOS4210
+ depends on CPU_EXYNOS4210 && !ARCH_MULTIPLATFORM
default y
select ARM_EXYNOS_CPUFREQ
help
config ARM_EXYNOS4X12_CPUFREQ
bool "SAMSUNG EXYNOS4x12"
- depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+ depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
default y
select ARM_EXYNOS_CPUFREQ
help
config ARM_EXYNOS5250_CPUFREQ
bool "SAMSUNG EXYNOS5250"
- depends on SOC_EXYNOS5250
+ depends on SOC_EXYNOS5250 && !ARCH_MULTIPLATFORM
default y
select ARM_EXYNOS_CPUFREQ
help
help
This adds the support for frequency switching on PA Semi
PWRficient processors.
+
+config POWERNV_CPUFREQ
+ tristate "CPU frequency scaling for IBM POWERNV platform"
+ depends on PPC_POWERNV
+ default y
+ help
+ This adds support for CPU frequency switching on IBM POWERNV
+ platform
obj-$(CONFIG_CPU_FREQ_PMAC) += pmac32-cpufreq.o
obj-$(CONFIG_CPU_FREQ_PMAC64) += pmac64-cpufreq.o
obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += pasemi-cpufreq.o
+obj-$(CONFIG_POWERNV_CPUFREQ) += powernv-cpufreq.o
##################################################################################
# Other platform drivers
goto err_unreg;
}
- data->freq_table = kmalloc(sizeof(*data->freq_table) *
+ data->freq_table = kzalloc(sizeof(*data->freq_table) *
(perf->state_count+1), GFP_KERNEL);
if (!data->freq_table) {
result = -ENOMEM;
static int at32_cpufreq_driver_init(struct cpufreq_policy *policy)
{
unsigned int frequency, rate, min_freq;
- static struct clk *cpuclk;
+ struct clk *cpuclk;
int retval, steps, i;
if (policy->cpu != 0)
};
static struct cpufreq_frequency_table cris_freq_table[] = {
- {0x01, 6000},
- {0x02, 200000},
- {0, CPUFREQ_TABLE_END},
+ {0, 0x01, 6000},
+ {0, 0x02, 200000},
+ {0, 0, CPUFREQ_TABLE_END},
};
static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
};
static struct cpufreq_frequency_table cris_freq_table[] = {
- {0x01, 6000},
- {0x02, 200000},
- {0, CPUFREQ_TABLE_END},
+ {0, 0x01, 6000},
+ {0, 0x02, 200000},
+ {0, 0, CPUFREQ_TABLE_END},
};
static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
};
static struct cpufreq_frequency_table elanfreq_table[] = {
- {0, 1000},
- {1, 2000},
- {2, 4000},
- {3, 8000},
- {4, 16000},
- {5, 33000},
- {6, 66000},
- {7, 99000},
- {0, CPUFREQ_TABLE_END},
+ {0, 0, 1000},
+ {0, 1, 2000},
+ {0, 2, 4000},
+ {0, 3, 8000},
+ {0, 4, 16000},
+ {0, 5, 33000},
+ {0, 6, 66000},
+ {0, 7, 99000},
+ {0, 0, CPUFREQ_TABLE_END},
};
};
static struct cpufreq_frequency_table exynos4210_freq_table[] = {
- {L0, 1200 * 1000},
- {L1, 1000 * 1000},
- {L2, 800 * 1000},
- {L3, 500 * 1000},
- {L4, 200 * 1000},
- {0, CPUFREQ_TABLE_END},
+ {0, L0, 1200 * 1000},
+ {0, L1, 1000 * 1000},
+ {0, L2, 800 * 1000},
+ {0, L3, 500 * 1000},
+ {0, L4, 200 * 1000},
+ {0, 0, CPUFREQ_TABLE_END},
};
static struct apll_freq apll_freq_4210[] = {
};
static struct cpufreq_frequency_table exynos4x12_freq_table[] = {
- {CPUFREQ_BOOST_FREQ, 1500 * 1000},
- {L1, 1400 * 1000},
- {L2, 1300 * 1000},
- {L3, 1200 * 1000},
- {L4, 1100 * 1000},
- {L5, 1000 * 1000},
- {L6, 900 * 1000},
- {L7, 800 * 1000},
- {L8, 700 * 1000},
- {L9, 600 * 1000},
- {L10, 500 * 1000},
- {L11, 400 * 1000},
- {L12, 300 * 1000},
- {L13, 200 * 1000},
- {0, CPUFREQ_TABLE_END},
+ {CPUFREQ_BOOST_FREQ, L0, 1500 * 1000},
+ {0, L1, 1400 * 1000},
+ {0, L2, 1300 * 1000},
+ {0, L3, 1200 * 1000},
+ {0, L4, 1100 * 1000},
+ {0, L5, 1000 * 1000},
+ {0, L6, 900 * 1000},
+ {0, L7, 800 * 1000},
+ {0, L8, 700 * 1000},
+ {0, L9, 600 * 1000},
+ {0, L10, 500 * 1000},
+ {0, L11, 400 * 1000},
+ {0, L12, 300 * 1000},
+ {0, L13, 200 * 1000},
+ {0, 0, CPUFREQ_TABLE_END},
};
static struct apll_freq *apll_freq_4x12;
};
static struct cpufreq_frequency_table exynos5250_freq_table[] = {
- {L0, 1700 * 1000},
- {L1, 1600 * 1000},
- {L2, 1500 * 1000},
- {L3, 1400 * 1000},
- {L4, 1300 * 1000},
- {L5, 1200 * 1000},
- {L6, 1100 * 1000},
- {L7, 1000 * 1000},
- {L8, 900 * 1000},
- {L9, 800 * 1000},
- {L10, 700 * 1000},
- {L11, 600 * 1000},
- {L12, 500 * 1000},
- {L13, 400 * 1000},
- {L14, 300 * 1000},
- {L15, 200 * 1000},
- {0, CPUFREQ_TABLE_END},
+ {0, L0, 1700 * 1000},
+ {0, L1, 1600 * 1000},
+ {0, L2, 1500 * 1000},
+ {0, L3, 1400 * 1000},
+ {0, L4, 1300 * 1000},
+ {0, L5, 1200 * 1000},
+ {0, L6, 1100 * 1000},
+ {0, L7, 1000 * 1000},
+ {0, L8, 900 * 1000},
+ {0, L9, 800 * 1000},
+ {0, L10, 700 * 1000},
+ {0, L11, 600 * 1000},
+ {0, L12, 500 * 1000},
+ {0, L13, 400 * 1000},
+ {0, L14, 300 * 1000},
+ {0, L15, 200 * 1000},
+ {0, 0, CPUFREQ_TABLE_END},
};
static struct apll_freq apll_freq_5250[] = {
continue;
}
if (!cpufreq_boost_enabled()
- && table[i].driver_data == CPUFREQ_BOOST_FREQ)
+ && (table[i].flags & CPUFREQ_BOOST_FREQ))
continue;
- pr_debug("table entry %u: %u kHz, %u driver_data\n",
- i, freq, table[i].driver_data);
+ pr_debug("table entry %u: %u kHz\n", i, freq);
if (freq < min_freq)
min_freq = freq;
if (freq > max_freq)
} else
*index = optimal.driver_data;
- pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency,
- table[*index].driver_data);
+ pr_debug("target index is %u, freq is:%u kHz\n", *index,
+ table[*index].frequency);
return 0;
}
* show_boost = false and driver_data != BOOST freq
* display NON BOOST freqs
*/
- if (show_boost ^ (table[i].driver_data == CPUFREQ_BOOST_FREQ))
+ if (show_boost ^ (table[i].flags & CPUFREQ_BOOST_FREQ))
continue;
count += sprintf(&buf[count], "%d ", table[i].frequency);
}
/* alloc freq_table */
- data->freq_table = kmalloc(sizeof(*data->freq_table) *
+ data->freq_table = kzalloc(sizeof(*data->freq_table) *
(data->acpi_data.state_count + 1),
GFP_KERNEL);
if (!data->freq_table) {
/* table init */
for (i = 0; i <= data->acpi_data.state_count; i++)
{
- data->freq_table[i].driver_data = i;
if (i < data->acpi_data.state_count) {
data->freq_table[i].frequency =
data->acpi_data.states[i].core_frequency * 1000;
* table.
*/
static struct cpufreq_frequency_table kirkwood_freq_table[] = {
- {STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
- {STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
- {0, CPUFREQ_TABLE_END},
+ {0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */
+ {0, STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */
+ {0, 0, CPUFREQ_TABLE_END},
};
static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
return -EINVAL;
}
- longhaul_table = kmalloc((numscales + 1) * sizeof(*longhaul_table),
+ longhaul_table = kzalloc((numscales + 1) * sizeof(*longhaul_table),
GFP_KERNEL);
if (!longhaul_table)
return -ENOMEM;
static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- static struct clk *cpuclk;
+ struct clk *cpuclk;
int i;
unsigned long rate;
int ret;
#define CPUFREQ_LOW 1
static struct cpufreq_frequency_table maple_cpu_freqs[] = {
- {CPUFREQ_HIGH, 0},
- {CPUFREQ_LOW, 0},
- {0, CPUFREQ_TABLE_END},
+ {0, CPUFREQ_HIGH, 0},
+ {0, CPUFREQ_LOW, 0},
+ {0, 0, CPUFREQ_TABLE_END},
};
/* Power mode data is an array of the 32 bits PCR values to use for
static struct cpufreq_frequency_table p4clockmod_table[] = {
- {DC_RESV, CPUFREQ_ENTRY_INVALID},
- {DC_DFLT, 0},
- {DC_25PT, 0},
- {DC_38PT, 0},
- {DC_50PT, 0},
- {DC_64PT, 0},
- {DC_75PT, 0},
- {DC_88PT, 0},
- {DC_DISABLE, 0},
- {DC_RESV, CPUFREQ_TABLE_END},
+ {0, DC_RESV, CPUFREQ_ENTRY_INVALID},
+ {0, DC_DFLT, 0},
+ {0, DC_25PT, 0},
+ {0, DC_38PT, 0},
+ {0, DC_50PT, 0},
+ {0, DC_64PT, 0},
+ {0, DC_75PT, 0},
+ {0, DC_88PT, 0},
+ {0, DC_DISABLE, 0},
+ {0, DC_RESV, CPUFREQ_TABLE_END},
};
/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */
static struct cpufreq_frequency_table pas_freqs[] = {
- {0, 0},
- {1, 0},
- {2, 0},
- {3, 0},
- {4, 0},
- {0, CPUFREQ_TABLE_END},
+ {0, 0, 0},
+ {0, 1, 0},
+ {0, 2, 0},
+ {0, 3, 0},
+ {0, 4, 0},
+ {0, 0, CPUFREQ_TABLE_END},
};
/*
#define CPUFREQ_LOW 1
static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
- {CPUFREQ_HIGH, 0},
- {CPUFREQ_LOW, 0},
- {0, CPUFREQ_TABLE_END},
+ {0, CPUFREQ_HIGH, 0},
+ {0, CPUFREQ_LOW, 0},
+ {0, 0, CPUFREQ_TABLE_END},
};
static inline void local_delay(unsigned long ms)
#define CPUFREQ_LOW 1
static struct cpufreq_frequency_table g5_cpu_freqs[] = {
- {CPUFREQ_HIGH, 0},
- {CPUFREQ_LOW, 0},
- {0, CPUFREQ_TABLE_END},
+ {0, CPUFREQ_HIGH, 0},
+ {0, CPUFREQ_LOW, 0},
+ {0, 0, CPUFREQ_TABLE_END},
};
/* Power mode data is an array of the 32 bits PCR values to use for
/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
static struct cpufreq_frequency_table clock_ratio[] = {
- {60, /* 110 -> 6.0x */ 0},
- {55, /* 011 -> 5.5x */ 0},
- {50, /* 001 -> 5.0x */ 0},
- {45, /* 000 -> 4.5x */ 0},
- {40, /* 010 -> 4.0x */ 0},
- {35, /* 111 -> 3.5x */ 0},
- {30, /* 101 -> 3.0x */ 0},
- {20, /* 100 -> 2.0x */ 0},
- {0, CPUFREQ_TABLE_END}
+ {0, 60, /* 110 -> 6.0x */ 0},
+ {0, 55, /* 011 -> 5.5x */ 0},
+ {0, 50, /* 001 -> 5.0x */ 0},
+ {0, 45, /* 000 -> 4.5x */ 0},
+ {0, 40, /* 010 -> 4.0x */ 0},
+ {0, 35, /* 111 -> 3.5x */ 0},
+ {0, 30, /* 101 -> 3.0x */ 0},
+ {0, 20, /* 100 -> 2.0x */ 0},
+ {0, 0, CPUFREQ_TABLE_END}
};
static const u8 index_to_register[8] = { 6, 3, 1, 0, 2, 7, 5, 4 };
if (check_pst_table(data, pst, maxvid))
return -EINVAL;
- powernow_table = kmalloc((sizeof(*powernow_table)
+ powernow_table = kzalloc((sizeof(*powernow_table)
* (data->numps + 1)), GFP_KERNEL);
if (!powernow_table) {
printk(KERN_ERR PFX "powernow_table memory alloc failure\n");
}
/* fill in data->powernow_table */
- powernow_table = kmalloc((sizeof(*powernow_table)
+ powernow_table = kzalloc((sizeof(*powernow_table)
* (data->acpi_data.state_count + 1)), GFP_KERNEL);
if (!powernow_table) {
pr_debug("powernow_table memory alloc failure\n");
powernow_table[data->acpi_data.state_count].frequency =
CPUFREQ_TABLE_END;
- powernow_table[data->acpi_data.state_count].driver_data = 0;
data->powernow_table = powernow_table;
if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu)
--- /dev/null
+/*
+ * POWERNV cpufreq driver for the IBM POWER processors
+ *
+ * (C) Copyright IBM 2014
+ *
+ * Author: Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) "powernv-cpufreq: " fmt
+
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/smp.h>
+#include <linux/of.h>
+
+#include <asm/cputhreads.h>
+#include <asm/reg.h>
+
+#define POWERNV_MAX_PSTATES 256
+
+static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
+
+/*
+ * Note: The set of pstates consists of contiguous integers, the
+ * smallest of which is indicated by powernv_pstate_info.min, the
+ * largest of which is indicated by powernv_pstate_info.max.
+ *
+ * The nominal pstate is the highest non-turbo pstate in this
+ * platform. This is indicated by powernv_pstate_info.nominal.
+ */
+static struct powernv_pstate_info {
+ int min;
+ int max;
+ int nominal;
+ int nr_pstates;
+} powernv_pstate_info;
+
+/*
+ * Initialize the freq table based on data obtained
+ * from the firmware passed via device-tree
+ */
+static int init_powernv_pstates(void)
+{
+ struct device_node *power_mgt;
+ int i, pstate_min, pstate_max, pstate_nominal, nr_pstates = 0;
+ const __be32 *pstate_ids, *pstate_freqs;
+ u32 len_ids, len_freqs;
+
+ power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
+ if (!power_mgt) {
+ pr_warn("power-mgt node not found\n");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(power_mgt, "ibm,pstate-min", &pstate_min)) {
+ pr_warn("ibm,pstate-min node not found\n");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(power_mgt, "ibm,pstate-max", &pstate_max)) {
+ pr_warn("ibm,pstate-max node not found\n");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(power_mgt, "ibm,pstate-nominal",
+ &pstate_nominal)) {
+ pr_warn("ibm,pstate-nominal not found\n");
+ return -ENODEV;
+ }
+ pr_info("cpufreq pstate min %d nominal %d max %d\n", pstate_min,
+ pstate_nominal, pstate_max);
+
+ pstate_ids = of_get_property(power_mgt, "ibm,pstate-ids", &len_ids);
+ if (!pstate_ids) {
+ pr_warn("ibm,pstate-ids not found\n");
+ return -ENODEV;
+ }
+
+ pstate_freqs = of_get_property(power_mgt, "ibm,pstate-frequencies-mhz",
+ &len_freqs);
+ if (!pstate_freqs) {
+ pr_warn("ibm,pstate-frequencies-mhz not found\n");
+ return -ENODEV;
+ }
+
+ WARN_ON(len_ids != len_freqs);
+ nr_pstates = min(len_ids, len_freqs) / sizeof(u32);
+ if (!nr_pstates) {
+ pr_warn("No PStates found\n");
+ return -ENODEV;
+ }
+
+ pr_debug("NR PStates %d\n", nr_pstates);
+ for (i = 0; i < nr_pstates; i++) {
+ u32 id = be32_to_cpu(pstate_ids[i]);
+ u32 freq = be32_to_cpu(pstate_freqs[i]);
+
+ pr_debug("PState id %d freq %d MHz\n", id, freq);
+ powernv_freqs[i].frequency = freq * 1000; /* kHz */
+ powernv_freqs[i].driver_data = id;
+ }
+ /* End of list marker entry */
+ powernv_freqs[i].frequency = CPUFREQ_TABLE_END;
+
+ powernv_pstate_info.min = pstate_min;
+ powernv_pstate_info.max = pstate_max;
+ powernv_pstate_info.nominal = pstate_nominal;
+ powernv_pstate_info.nr_pstates = nr_pstates;
+
+ return 0;
+}
+
+/* Returns the CPU frequency corresponding to the pstate_id. */
+static unsigned int pstate_id_to_freq(int pstate_id)
+{
+ int i;
+
+ i = powernv_pstate_info.max - pstate_id;
+ BUG_ON(i >= powernv_pstate_info.nr_pstates || i < 0);
+
+ return powernv_freqs[i].frequency;
+}
+
+/*
+ * cpuinfo_nominal_freq_show - Show the nominal CPU frequency as indicated by
+ * the firmware
+ */
+static ssize_t cpuinfo_nominal_freq_show(struct cpufreq_policy *policy,
+ char *buf)
+{
+ return sprintf(buf, "%u\n",
+ pstate_id_to_freq(powernv_pstate_info.nominal));
+}
+
+struct freq_attr cpufreq_freq_attr_cpuinfo_nominal_freq =
+ __ATTR_RO(cpuinfo_nominal_freq);
+
+static struct freq_attr *powernv_cpu_freq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ &cpufreq_freq_attr_cpuinfo_nominal_freq,
+ NULL,
+};
+
+/* Helper routines */
+
+/* Access helpers to power mgt SPR */
+
+static inline unsigned long get_pmspr(unsigned long sprn)
+{
+ switch (sprn) {
+ case SPRN_PMCR:
+ return mfspr(SPRN_PMCR);
+
+ case SPRN_PMICR:
+ return mfspr(SPRN_PMICR);
+
+ case SPRN_PMSR:
+ return mfspr(SPRN_PMSR);
+ }
+ BUG();
+}
+
+static inline void set_pmspr(unsigned long sprn, unsigned long val)
+{
+ switch (sprn) {
+ case SPRN_PMCR:
+ mtspr(SPRN_PMCR, val);
+ return;
+
+ case SPRN_PMICR:
+ mtspr(SPRN_PMICR, val);
+ return;
+ }
+ BUG();
+}
+
+/*
+ * Use objects of this type to query/update
+ * pstates on a remote CPU via smp_call_function.
+ */
+struct powernv_smp_call_data {
+ unsigned int freq;
+ int pstate_id;
+};
+
+/*
+ * powernv_read_cpu_freq: Reads the current frequency on this CPU.
+ *
+ * Called via smp_call_function.
+ *
+ * Note: The caller of the smp_call_function should pass an argument of
+ * the type 'struct powernv_smp_call_data *' along with this function.
+ *
+ * The current frequency on this CPU will be returned via
+ * ((struct powernv_smp_call_data *)arg)->freq;
+ */
+static void powernv_read_cpu_freq(void *arg)
+{
+ unsigned long pmspr_val;
+ s8 local_pstate_id;
+ struct powernv_smp_call_data *freq_data = arg;
+
+ pmspr_val = get_pmspr(SPRN_PMSR);
+
+ /*
+ * The local pstate id corresponds bits 48..55 in the PMSR.
+ * Note: Watch out for the sign!
+ */
+ local_pstate_id = (pmspr_val >> 48) & 0xFF;
+ freq_data->pstate_id = local_pstate_id;
+ freq_data->freq = pstate_id_to_freq(freq_data->pstate_id);
+
+ pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n",
+ raw_smp_processor_id(), pmspr_val, freq_data->pstate_id,
+ freq_data->freq);
+}
+
+/*
+ * powernv_cpufreq_get: Returns the CPU frequency as reported by the
+ * firmware for CPU 'cpu'. This value is reported through the sysfs
+ * file cpuinfo_cur_freq.
+ */
+unsigned int powernv_cpufreq_get(unsigned int cpu)
+{
+ struct powernv_smp_call_data freq_data;
+
+ smp_call_function_any(cpu_sibling_mask(cpu), powernv_read_cpu_freq,
+ &freq_data, 1);
+
+ return freq_data.freq;
+}
+
+/*
+ * set_pstate: Sets the pstate on this CPU.
+ *
+ * This is called via an smp_call_function.
+ *
+ * The caller must ensure that freq_data is of the type
+ * (struct powernv_smp_call_data *) and the pstate_id which needs to be set
+ * on this CPU should be present in freq_data->pstate_id.
+ */
+static void set_pstate(void *freq_data)
+{
+ unsigned long val;
+ unsigned long pstate_ul =
+ ((struct powernv_smp_call_data *) freq_data)->pstate_id;
+
+ val = get_pmspr(SPRN_PMCR);
+ val = val & 0x0000FFFFFFFFFFFFULL;
+
+ pstate_ul = pstate_ul & 0xFF;
+
+ /* Set both global(bits 56..63) and local(bits 48..55) PStates */
+ val = val | (pstate_ul << 56) | (pstate_ul << 48);
+
+ pr_debug("Setting cpu %d pmcr to %016lX\n",
+ raw_smp_processor_id(), val);
+ set_pmspr(SPRN_PMCR, val);
+}
+
+/*
+ * powernv_cpufreq_target_index: Sets the frequency corresponding to
+ * the cpufreq table entry indexed by new_index on the cpus in the
+ * mask policy->cpus
+ */
+static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
+ unsigned int new_index)
+{
+ struct powernv_smp_call_data freq_data;
+
+ freq_data.pstate_id = powernv_freqs[new_index].driver_data;
+
+ /*
+ * Use smp_call_function to send IPI and execute the
+ * mtspr on target CPU. We could do that without IPI
+ * if current CPU is within policy->cpus (core)
+ */
+ smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
+
+ return 0;
+}
+
+static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ int base, i;
+
+ base = cpu_first_thread_sibling(policy->cpu);
+
+ for (i = 0; i < threads_per_core; i++)
+ cpumask_set_cpu(base + i, policy->cpus);
+
+ return cpufreq_table_validate_and_show(policy, powernv_freqs);
+}
+
+static struct cpufreq_driver powernv_cpufreq_driver = {
+ .name = "powernv-cpufreq",
+ .flags = CPUFREQ_CONST_LOOPS,
+ .init = powernv_cpufreq_cpu_init,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .target_index = powernv_cpufreq_target_index,
+ .get = powernv_cpufreq_get,
+ .attr = powernv_cpu_freq_attr,
+};
+
+static int __init powernv_cpufreq_init(void)
+{
+ int rc = 0;
+
+ /* Discover pstates from device tree and init */
+ rc = init_powernv_pstates();
+ if (rc) {
+ pr_info("powernv-cpufreq disabled. System does not support PState control\n");
+ return rc;
+ }
+
+ return cpufreq_register_driver(&powernv_cpufreq_driver);
+}
+module_init(powernv_cpufreq_init);
+
+static void __exit powernv_cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&powernv_cpufreq_driver);
+}
+module_exit(powernv_cpufreq_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>");
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/errno.h>
-#include <sysdev/fsl_soc.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
/* the CBE supports an 8 step frequency scaling */
static struct cpufreq_frequency_table cbe_freqs[] = {
- {1, 0},
- {2, 0},
- {3, 0},
- {4, 0},
- {5, 0},
- {6, 0},
- {8, 0},
- {10, 0},
- {0, CPUFREQ_TABLE_END},
+ {0, 1, 0},
+ {0, 2, 0},
+ {0, 3, 0},
+ {0, 4, 0},
+ {0, 5, 0},
+ {0, 6, 0},
+ {0, 8, 0},
+ {0, 10, 0},
+ {0, 0, CPUFREQ_TABLE_END},
};
/*
#endif
static struct cpufreq_frequency_table s3c2416_freq_table[] = {
- { SOURCE_HCLK, FREQ_DVS },
- { SOURCE_ARMDIV, 133333 },
- { SOURCE_ARMDIV, 266666 },
- { SOURCE_ARMDIV, 400000 },
- { 0, CPUFREQ_TABLE_END },
+ { 0, SOURCE_HCLK, FREQ_DVS },
+ { 0, SOURCE_ARMDIV, 133333 },
+ { 0, SOURCE_ARMDIV, 266666 },
+ { 0, SOURCE_ARMDIV, 400000 },
+ { 0, 0, CPUFREQ_TABLE_END },
};
static struct cpufreq_frequency_table s3c2450_freq_table[] = {
- { SOURCE_HCLK, FREQ_DVS },
- { SOURCE_ARMDIV, 133500 },
- { SOURCE_ARMDIV, 267000 },
- { SOURCE_ARMDIV, 534000 },
- { 0, CPUFREQ_TABLE_END },
+ { 0, SOURCE_HCLK, FREQ_DVS },
+ { 0, SOURCE_ARMDIV, 133500 },
+ { 0, SOURCE_ARMDIV, 267000 },
+ { 0, SOURCE_ARMDIV, 534000 },
+ { 0, 0, CPUFREQ_TABLE_END },
};
static unsigned int s3c2416_cpufreq_get_speed(unsigned int cpu)
size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
size++;
- ftab = kmalloc(sizeof(*ftab) * size, GFP_KERNEL);
+ ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL);
if (!ftab) {
printk(KERN_ERR "%s: no memory for tables\n", __func__);
return -ENOMEM;
size = sizeof(*vals) * (plls_no + 1);
- vals = kmalloc(size, GFP_KERNEL);
+ vals = kzalloc(size, GFP_KERNEL);
if (vals) {
memcpy(vals, plls, size);
pll_reg = vals;
};
static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
- { 0, 66000 },
- { 0, 100000 },
- { 0, 133000 },
- { 1, 200000 },
- { 1, 222000 },
- { 1, 266000 },
- { 2, 333000 },
- { 2, 400000 },
- { 2, 532000 },
- { 2, 533000 },
- { 3, 667000 },
- { 4, 800000 },
- { 0, CPUFREQ_TABLE_END },
+ { 0, 0, 66000 },
+ { 0, 0, 100000 },
+ { 0, 0, 133000 },
+ { 0, 1, 200000 },
+ { 0, 1, 222000 },
+ { 0, 1, 266000 },
+ { 0, 2, 333000 },
+ { 0, 2, 400000 },
+ { 0, 2, 532000 },
+ { 0, 2, 533000 },
+ { 0, 3, 667000 },
+ { 0, 4, 800000 },
+ { 0, 0, CPUFREQ_TABLE_END },
};
#endif
};
static struct cpufreq_frequency_table s5pv210_freq_table[] = {
- {L0, 1000*1000},
- {L1, 800*1000},
- {L2, 400*1000},
- {L3, 200*1000},
- {L4, 100*1000},
- {0, CPUFREQ_TABLE_END},
+ {0, L0, 1000*1000},
+ {0, L1, 800*1000},
+ {0, L2, 400*1000},
+ {0, L3, 200*1000},
+ {0, L4, 100*1000},
+ {0, 0, CPUFREQ_TABLE_END},
};
static struct regulator *arm_regulator;
#define PFX "sc520_freq: "
static struct cpufreq_frequency_table sc520_freq_table[] = {
- {0x01, 100000},
- {0x02, 133000},
- {0, CPUFREQ_TABLE_END},
+ {0, 0x01, 100000},
+ {0, 0x02, 133000},
+ {0, 0, CPUFREQ_TABLE_END},
};
static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
cnt = prop->length / sizeof(u32);
val = prop->value;
- freq_tbl = kmalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL);
+ freq_tbl = kzalloc(sizeof(*freq_tbl) * (cnt + 1), GFP_KERNEL);
if (!freq_tbl) {
ret = -ENOMEM;
goto out_put_node;
}
- for (i = 0; i < cnt; i++) {
- freq_tbl[i].driver_data = i;
+ for (i = 0; i < cnt; i++)
freq_tbl[i].frequency = be32_to_cpup(val++);
- }
- freq_tbl[i].driver_data = i;
freq_tbl[i].frequency = CPUFREQ_TABLE_END;
spear_cpufreq.freq_tbl = freq_tbl;
* are in kHz for the time being.
*/
static struct cpufreq_frequency_table speedstep_freqs[] = {
- {SPEEDSTEP_HIGH, 0},
- {SPEEDSTEP_LOW, 0},
- {0, CPUFREQ_TABLE_END},
+ {0, SPEEDSTEP_HIGH, 0},
+ {0, SPEEDSTEP_LOW, 0},
+ {0, 0, CPUFREQ_TABLE_END},
};
* are in kHz for the time being.
*/
static struct cpufreq_frequency_table speedstep_freqs[] = {
- {SPEEDSTEP_HIGH, 0},
- {SPEEDSTEP_LOW, 0},
- {0, CPUFREQ_TABLE_END},
+ {0, SPEEDSTEP_HIGH, 0},
+ {0, SPEEDSTEP_LOW, 0},
+ {0, 0, CPUFREQ_TABLE_END},
};
#define GET_SPEEDSTEP_OWNER 0
freqs.new = target_freq;
cpufreq_freq_transition_begin(policy, &freqs);
- ret = clk_set_rate(policy->mclk, target_freq * 1000);
+ ret = clk_set_rate(policy->clk, target_freq * 1000);
cpufreq_freq_transition_end(policy, &freqs, ret);
return ret;
}
define_show_state_function(exit_latency)
+define_show_state_function(target_residency)
define_show_state_function(power_usage)
define_show_state_ull_function(usage)
define_show_state_ull_function(time)
define_one_state_ro(name, show_state_name);
define_one_state_ro(desc, show_state_desc);
define_one_state_ro(latency, show_state_exit_latency);
+define_one_state_ro(residency, show_state_target_residency);
define_one_state_ro(power, show_state_power_usage);
define_one_state_ro(usage, show_state_usage);
define_one_state_ro(time, show_state_time);
&attr_name.attr,
&attr_desc.attr,
&attr_latency.attr,
+ &attr_residency.attr,
&attr_power.attr,
&attr_usage.attr,
&attr_time.attr,
config DMA_BCM2835
tristate "BCM2835 DMA engine support"
- depends on (ARCH_BCM2835 || MACH_BCM2708)
+ depends on ARCH_BCM2835
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
select DMA_VIRTUAL_CHANNELS
help
Enable support for the MOXA ART SoC DMA controller.
+
+config FSL_EDMA
+ tristate "Freescale eDMA engine support"
+ depends on OF
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ help
+ Support the Freescale eDMA engine with programmable channel
+ multiplexing capability for DMA request sources(slot).
+ This module can be found on Freescale Vybrid and LS-1 SoCs.
config DMA_ENGINE
bool
config DMA_ENGINE_RAID
bool
+config QCOM_BAM_DMA
+ tristate "QCOM BAM DMA support"
+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ ---help---
+ Enable support for the QCOM BAM DMA controller. This controller
+ provides DMA capabilities for a variety of on-chip devices.
+
endif
obj-$(CONFIG_TI_CPPI41) += cppi41.o
obj-$(CONFIG_K3_DMA) += k3dma.o
obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
+obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
+obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
*/
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/mutex.h>
*/
void devm_acpi_dma_controller_free(struct device *dev)
{
- WARN_ON(devres_destroy(dev, devm_acpi_dma_release, NULL, NULL));
+ WARN_ON(devres_release(dev, devm_acpi_dma_release, NULL, NULL));
}
EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free);
* @index: index of FixedDMA descriptor for @dev
*
* Return:
- * Pointer to appropriate dma channel on success or NULL on error.
+ * Pointer to appropriate dma channel on success or an error pointer.
*/
struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev,
size_t index)
/* Check if the device was enumerated by ACPI */
if (!dev || !ACPI_HANDLE(dev))
- return NULL;
+ return ERR_PTR(-ENODEV);
if (acpi_bus_get_device(ACPI_HANDLE(dev), &adev))
- return NULL;
+ return ERR_PTR(-ENODEV);
memset(&pdata, 0, sizeof(pdata));
pdata.index = index;
acpi_dev_free_resource_list(&resource_list);
if (dma_spec->slave_id < 0 || dma_spec->chan_id < 0)
- return NULL;
+ return ERR_PTR(-ENODEV);
mutex_lock(&acpi_dma_lock);
}
mutex_unlock(&acpi_dma_lock);
- return chan;
+ return chan ? chan : ERR_PTR(-EPROBE_DEFER);
}
EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_index);
* the first FixedDMA descriptor is TX and second is RX.
*
* Return:
- * Pointer to appropriate dma channel on success or NULL on error.
+ * Pointer to appropriate dma channel on success or an error pointer.
*/
struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev,
const char *name)
else if (!strcmp(name, "rx"))
index = 1;
else
- return NULL;
+ return ERR_PTR(-ENODEV);
return acpi_dma_request_slave_chan_by_index(dev, index);
}
/* Disable interrupts */
atc_disable_chan_irq(atdma, chan->chan_id);
- tasklet_disable(&atchan->tasklet);
tasklet_kill(&atchan->tasklet);
list_del(&chan->device_node);
u32 desc_phys;
int ret;
+ desc_phys = lower_32_bits(c->desc_phys);
+ desc_num = (desc_phys - cdd->descs_phys) / sizeof(struct cppi41_desc);
+ if (!cdd->chan_busy[desc_num])
+ return 0;
+
ret = cppi41_tear_down_chan(c);
if (ret)
return ret;
- desc_phys = lower_32_bits(c->desc_phys);
- desc_num = (desc_phys - cdd->descs_phys) / sizeof(struct cppi41_desc);
WARN_ON(!cdd->chan_busy[desc_num]);
cdd->chan_busy[desc_num] = NULL;
struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
const char *name)
{
- struct dma_chan *chan;
-
/* If device-tree is present get slave info from here */
if (dev->of_node)
return of_dma_request_slave_channel(dev->of_node, name);
/* If device was enumerated by ACPI get slave info from here */
- if (ACPI_HANDLE(dev)) {
- chan = acpi_dma_request_slave_chan_by_name(dev, name);
- if (chan)
- return chan;
- }
+ if (ACPI_HANDLE(dev))
+ return acpi_dma_request_slave_chan_by_name(dev, name);
return ERR_PTR(-ENODEV);
}
static void result(const char *err, unsigned int n, unsigned int src_off,
unsigned int dst_off, unsigned int len, unsigned long data)
{
- pr_info("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)",
+ pr_info("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)\n",
current->comm, n, err, src_off, dst_off, len, data);
}
unsigned int dst_off, unsigned int len,
unsigned long data)
{
- pr_debug("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)",
+ pr_debug("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)\n",
current->comm, n, err, src_off, dst_off, len, data);
}
* of which use ARM any more). See the "Databook" from Synopsys for
* information beyond what licensees probably provide.
*
- * The driver has currently been tested only with the Atmel AT32AP7000,
- * which does not support descriptor writeback.
+ * The driver has been tested with the Atmel AT32AP7000, which does not
+ * support descriptor writeback.
*/
static inline bool is_request_line_unset(struct dw_dma_chan *dwc)
int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
{
struct dw_dma *dw;
- size_t size;
bool autocfg;
unsigned int dw_params;
unsigned int nr_channels;
int err;
int i;
+ dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL);
+ if (!dw)
+ return -ENOMEM;
+
+ dw->regs = chip->regs;
+ chip->dw = dw;
+
dw_params = dma_read_byaddr(chip->regs, DW_PARAMS);
autocfg = dw_params >> DW_PARAMS_EN & 0x1;
else
nr_channels = pdata->nr_channels;
- size = sizeof(struct dw_dma) + nr_channels * sizeof(struct dw_dma_chan);
- dw = devm_kzalloc(chip->dev, size, GFP_KERNEL);
- if (!dw)
+ dw->chan = devm_kcalloc(chip->dev, nr_channels, sizeof(*dw->chan),
+ GFP_KERNEL);
+ if (!dw->chan)
return -ENOMEM;
dw->clk = devm_clk_get(chip->dev, "hclk");
return PTR_ERR(dw->clk);
clk_prepare_enable(dw->clk);
- dw->regs = chip->regs;
- chip->dw = dw;
-
/* Get hardware configuration parameters */
if (autocfg) {
max_blk_size = dma_readl(dw, MAX_BLK_SIZE);
dev_warn(&pdev->dev, "can't remove device properly: %d\n", ret);
}
+#ifdef CONFIG_PM_SLEEP
+
+static int dw_pci_suspend_late(struct device *dev)
+{
+ struct pci_dev *pci = to_pci_dev(dev);
+ struct dw_dma_chip *chip = pci_get_drvdata(pci);
+
+ return dw_dma_suspend(chip);
+};
+
+static int dw_pci_resume_early(struct device *dev)
+{
+ struct pci_dev *pci = to_pci_dev(dev);
+ struct dw_dma_chip *chip = pci_get_drvdata(pci);
+
+ return dw_dma_resume(chip);
+};
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define dw_pci_suspend_late NULL
+#define dw_pci_resume_early NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops dw_pci_dev_pm_ops = {
+ .suspend_late = dw_pci_suspend_late,
+ .resume_early = dw_pci_resume_early,
+};
+
static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = {
/* Medfield */
{ PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata },
/* BayTrail */
{ PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_pdata },
{ PCI_VDEVICE(INTEL, 0x0f40), (kernel_ulong_t)&dw_pci_pdata },
+
+ /* Haswell */
+ { PCI_VDEVICE(INTEL, 0x9c60), (kernel_ulong_t)&dw_pci_pdata },
{ }
};
MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
.id_table = dw_pci_id_table,
.probe = dw_pci_probe,
.remove = dw_pci_remove,
+ .driver = {
+ .pm = &dw_pci_dev_pm_ops,
+ },
};
module_pci_driver(dw_pci_driver);
struct tasklet_struct tasklet;
struct clk *clk;
+ /* channels */
+ struct dw_dma_chan *chan;
u8 all_chan_mask;
/* hardware configuration */
unsigned char nr_masters;
unsigned char data_width[4];
-
- struct dw_dma_chan chan[0];
};
static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
edma_alloc_slot(EDMA_CTLR(echan->ch_num),
EDMA_SLOT_ANY);
if (echan->slot[i] < 0) {
+ kfree(edesc);
dev_err(dev, "Failed to allocate slot\n");
return NULL;
}
ret = edma_config_pset(chan, &edesc->pset[i], src_addr,
dst_addr, burst, dev_width, period_len,
direction);
- if (ret < 0)
+ if (ret < 0) {
+ kfree(edesc);
return NULL;
+ }
if (direction == DMA_DEV_TO_MEM)
dst_addr += period_len;
--- /dev/null
+/*
+ * drivers/dma/fsl-edma.c
+ *
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * Driver for the Freescale eDMA engine with flexible channel multiplexing
+ * capability for DMA request sources. The eDMA block can be found on some
+ * Vybrid and Layerscape SoCs.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+
+#include "virt-dma.h"
+
+#define EDMA_CR 0x00
+#define EDMA_ES 0x04
+#define EDMA_ERQ 0x0C
+#define EDMA_EEI 0x14
+#define EDMA_SERQ 0x1B
+#define EDMA_CERQ 0x1A
+#define EDMA_SEEI 0x19
+#define EDMA_CEEI 0x18
+#define EDMA_CINT 0x1F
+#define EDMA_CERR 0x1E
+#define EDMA_SSRT 0x1D
+#define EDMA_CDNE 0x1C
+#define EDMA_INTR 0x24
+#define EDMA_ERR 0x2C
+
+#define EDMA_TCD_SADDR(x) (0x1000 + 32 * (x))
+#define EDMA_TCD_SOFF(x) (0x1004 + 32 * (x))
+#define EDMA_TCD_ATTR(x) (0x1006 + 32 * (x))
+#define EDMA_TCD_NBYTES(x) (0x1008 + 32 * (x))
+#define EDMA_TCD_SLAST(x) (0x100C + 32 * (x))
+#define EDMA_TCD_DADDR(x) (0x1010 + 32 * (x))
+#define EDMA_TCD_DOFF(x) (0x1014 + 32 * (x))
+#define EDMA_TCD_CITER_ELINK(x) (0x1016 + 32 * (x))
+#define EDMA_TCD_CITER(x) (0x1016 + 32 * (x))
+#define EDMA_TCD_DLAST_SGA(x) (0x1018 + 32 * (x))
+#define EDMA_TCD_CSR(x) (0x101C + 32 * (x))
+#define EDMA_TCD_BITER_ELINK(x) (0x101E + 32 * (x))
+#define EDMA_TCD_BITER(x) (0x101E + 32 * (x))
+
+#define EDMA_CR_EDBG BIT(1)
+#define EDMA_CR_ERCA BIT(2)
+#define EDMA_CR_ERGA BIT(3)
+#define EDMA_CR_HOE BIT(4)
+#define EDMA_CR_HALT BIT(5)
+#define EDMA_CR_CLM BIT(6)
+#define EDMA_CR_EMLM BIT(7)
+#define EDMA_CR_ECX BIT(16)
+#define EDMA_CR_CX BIT(17)
+
+#define EDMA_SEEI_SEEI(x) ((x) & 0x1F)
+#define EDMA_CEEI_CEEI(x) ((x) & 0x1F)
+#define EDMA_CINT_CINT(x) ((x) & 0x1F)
+#define EDMA_CERR_CERR(x) ((x) & 0x1F)
+
+#define EDMA_TCD_ATTR_DSIZE(x) (((x) & 0x0007))
+#define EDMA_TCD_ATTR_DMOD(x) (((x) & 0x001F) << 3)
+#define EDMA_TCD_ATTR_SSIZE(x) (((x) & 0x0007) << 8)
+#define EDMA_TCD_ATTR_SMOD(x) (((x) & 0x001F) << 11)
+#define EDMA_TCD_ATTR_SSIZE_8BIT (0x0000)
+#define EDMA_TCD_ATTR_SSIZE_16BIT (0x0100)
+#define EDMA_TCD_ATTR_SSIZE_32BIT (0x0200)
+#define EDMA_TCD_ATTR_SSIZE_64BIT (0x0300)
+#define EDMA_TCD_ATTR_SSIZE_32BYTE (0x0500)
+#define EDMA_TCD_ATTR_DSIZE_8BIT (0x0000)
+#define EDMA_TCD_ATTR_DSIZE_16BIT (0x0001)
+#define EDMA_TCD_ATTR_DSIZE_32BIT (0x0002)
+#define EDMA_TCD_ATTR_DSIZE_64BIT (0x0003)
+#define EDMA_TCD_ATTR_DSIZE_32BYTE (0x0005)
+
+#define EDMA_TCD_SOFF_SOFF(x) (x)
+#define EDMA_TCD_NBYTES_NBYTES(x) (x)
+#define EDMA_TCD_SLAST_SLAST(x) (x)
+#define EDMA_TCD_DADDR_DADDR(x) (x)
+#define EDMA_TCD_CITER_CITER(x) ((x) & 0x7FFF)
+#define EDMA_TCD_DOFF_DOFF(x) (x)
+#define EDMA_TCD_DLAST_SGA_DLAST_SGA(x) (x)
+#define EDMA_TCD_BITER_BITER(x) ((x) & 0x7FFF)
+
+#define EDMA_TCD_CSR_START BIT(0)
+#define EDMA_TCD_CSR_INT_MAJOR BIT(1)
+#define EDMA_TCD_CSR_INT_HALF BIT(2)
+#define EDMA_TCD_CSR_D_REQ BIT(3)
+#define EDMA_TCD_CSR_E_SG BIT(4)
+#define EDMA_TCD_CSR_E_LINK BIT(5)
+#define EDMA_TCD_CSR_ACTIVE BIT(6)
+#define EDMA_TCD_CSR_DONE BIT(7)
+
+#define EDMAMUX_CHCFG_DIS 0x0
+#define EDMAMUX_CHCFG_ENBL 0x80
+#define EDMAMUX_CHCFG_SOURCE(n) ((n) & 0x3F)
+
+#define DMAMUX_NR 2
+
+#define FSL_EDMA_BUSWIDTHS BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
+
+struct fsl_edma_hw_tcd {
+ u32 saddr;
+ u16 soff;
+ u16 attr;
+ u32 nbytes;
+ u32 slast;
+ u32 daddr;
+ u16 doff;
+ u16 citer;
+ u32 dlast_sga;
+ u16 csr;
+ u16 biter;
+};
+
+struct fsl_edma_sw_tcd {
+ dma_addr_t ptcd;
+ struct fsl_edma_hw_tcd *vtcd;
+};
+
+struct fsl_edma_slave_config {
+ enum dma_transfer_direction dir;
+ enum dma_slave_buswidth addr_width;
+ u32 dev_addr;
+ u32 burst;
+ u32 attr;
+};
+
+struct fsl_edma_chan {
+ struct virt_dma_chan vchan;
+ enum dma_status status;
+ struct fsl_edma_engine *edma;
+ struct fsl_edma_desc *edesc;
+ struct fsl_edma_slave_config fsc;
+ struct dma_pool *tcd_pool;
+};
+
+struct fsl_edma_desc {
+ struct virt_dma_desc vdesc;
+ struct fsl_edma_chan *echan;
+ bool iscyclic;
+ unsigned int n_tcds;
+ struct fsl_edma_sw_tcd tcd[];
+};
+
+struct fsl_edma_engine {
+ struct dma_device dma_dev;
+ void __iomem *membase;
+ void __iomem *muxbase[DMAMUX_NR];
+ struct clk *muxclk[DMAMUX_NR];
+ struct mutex fsl_edma_mutex;
+ u32 n_chans;
+ int txirq;
+ int errirq;
+ bool big_endian;
+ struct fsl_edma_chan chans[];
+};
+
+/*
+ * R/W functions for big- or little-endian registers
+ * the eDMA controller's endian is independent of the CPU core's endian.
+ */
+
+static u16 edma_readw(struct fsl_edma_engine *edma, void __iomem *addr)
+{
+ if (edma->big_endian)
+ return ioread16be(addr);
+ else
+ return ioread16(addr);
+}
+
+static u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
+{
+ if (edma->big_endian)
+ return ioread32be(addr);
+ else
+ return ioread32(addr);
+}
+
+static void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr)
+{
+ iowrite8(val, addr);
+}
+
+static void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr)
+{
+ if (edma->big_endian)
+ iowrite16be(val, addr);
+ else
+ iowrite16(val, addr);
+}
+
+static void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem *addr)
+{
+ if (edma->big_endian)
+ iowrite32be(val, addr);
+ else
+ iowrite32(val, addr);
+}
+
+static struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan)
+{
+ return container_of(chan, struct fsl_edma_chan, vchan.chan);
+}
+
+static struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd)
+{
+ return container_of(vd, struct fsl_edma_desc, vdesc);
+}
+
+static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan)
+{
+ void __iomem *addr = fsl_chan->edma->membase;
+ u32 ch = fsl_chan->vchan.chan.chan_id;
+
+ edma_writeb(fsl_chan->edma, EDMA_SEEI_SEEI(ch), addr + EDMA_SEEI);
+ edma_writeb(fsl_chan->edma, ch, addr + EDMA_SERQ);
+}
+
+static void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan)
+{
+ void __iomem *addr = fsl_chan->edma->membase;
+ u32 ch = fsl_chan->vchan.chan.chan_id;
+
+ edma_writeb(fsl_chan->edma, ch, addr + EDMA_CERQ);
+ edma_writeb(fsl_chan->edma, EDMA_CEEI_CEEI(ch), addr + EDMA_CEEI);
+}
+
+static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
+ unsigned int slot, bool enable)
+{
+ u32 ch = fsl_chan->vchan.chan.chan_id;
+ void __iomem *muxaddr = fsl_chan->edma->muxbase[ch / DMAMUX_NR];
+ unsigned chans_per_mux, ch_off;
+
+ chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
+ ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
+
+ if (enable)
+ edma_writeb(fsl_chan->edma,
+ EDMAMUX_CHCFG_ENBL | EDMAMUX_CHCFG_SOURCE(slot),
+ muxaddr + ch_off);
+ else
+ edma_writeb(fsl_chan->edma, EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
+}
+
+static unsigned int fsl_edma_get_tcd_attr(enum dma_slave_buswidth addr_width)
+{
+ switch (addr_width) {
+ case 1:
+ return EDMA_TCD_ATTR_SSIZE_8BIT | EDMA_TCD_ATTR_DSIZE_8BIT;
+ case 2:
+ return EDMA_TCD_ATTR_SSIZE_16BIT | EDMA_TCD_ATTR_DSIZE_16BIT;
+ case 4:
+ return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
+ case 8:
+ return EDMA_TCD_ATTR_SSIZE_64BIT | EDMA_TCD_ATTR_DSIZE_64BIT;
+ default:
+ return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT;
+ }
+}
+
+static void fsl_edma_free_desc(struct virt_dma_desc *vdesc)
+{
+ struct fsl_edma_desc *fsl_desc;
+ int i;
+
+ fsl_desc = to_fsl_edma_desc(vdesc);
+ for (i = 0; i < fsl_desc->n_tcds; i++)
+ dma_pool_free(fsl_desc->echan->tcd_pool,
+ fsl_desc->tcd[i].vtcd,
+ fsl_desc->tcd[i].ptcd);
+ kfree(fsl_desc);
+}
+
+static int fsl_edma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+ struct dma_slave_config *cfg = (void *)arg;
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ switch (cmd) {
+ case DMA_TERMINATE_ALL:
+ spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+ fsl_edma_disable_request(fsl_chan);
+ fsl_chan->edesc = NULL;
+ vchan_get_all_descriptors(&fsl_chan->vchan, &head);
+ spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+ vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
+ return 0;
+
+ case DMA_SLAVE_CONFIG:
+ fsl_chan->fsc.dir = cfg->direction;
+ if (cfg->direction == DMA_DEV_TO_MEM) {
+ fsl_chan->fsc.dev_addr = cfg->src_addr;
+ fsl_chan->fsc.addr_width = cfg->src_addr_width;
+ fsl_chan->fsc.burst = cfg->src_maxburst;
+ fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->src_addr_width);
+ } else if (cfg->direction == DMA_MEM_TO_DEV) {
+ fsl_chan->fsc.dev_addr = cfg->dst_addr;
+ fsl_chan->fsc.addr_width = cfg->dst_addr_width;
+ fsl_chan->fsc.burst = cfg->dst_maxburst;
+ fsl_chan->fsc.attr = fsl_edma_get_tcd_attr(cfg->dst_addr_width);
+ } else {
+ return -EINVAL;
+ }
+ return 0;
+
+ case DMA_PAUSE:
+ spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+ if (fsl_chan->edesc) {
+ fsl_edma_disable_request(fsl_chan);
+ fsl_chan->status = DMA_PAUSED;
+ }
+ spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+ return 0;
+
+ case DMA_RESUME:
+ spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+ if (fsl_chan->edesc) {
+ fsl_edma_enable_request(fsl_chan);
+ fsl_chan->status = DMA_IN_PROGRESS;
+ }
+ spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+ return 0;
+
+ default:
+ return -ENXIO;
+ }
+}
+
+static size_t fsl_edma_desc_residue(struct fsl_edma_chan *fsl_chan,
+ struct virt_dma_desc *vdesc, bool in_progress)
+{
+ struct fsl_edma_desc *edesc = fsl_chan->edesc;
+ void __iomem *addr = fsl_chan->edma->membase;
+ u32 ch = fsl_chan->vchan.chan.chan_id;
+ enum dma_transfer_direction dir = fsl_chan->fsc.dir;
+ dma_addr_t cur_addr, dma_addr;
+ size_t len, size;
+ int i;
+
+ /* calculate the total size in this desc */
+ for (len = i = 0; i < fsl_chan->edesc->n_tcds; i++)
+ len += edma_readl(fsl_chan->edma, &(edesc->tcd[i].vtcd->nbytes))
+ * edma_readw(fsl_chan->edma, &(edesc->tcd[i].vtcd->biter));
+
+ if (!in_progress)
+ return len;
+
+ if (dir == DMA_MEM_TO_DEV)
+ cur_addr = edma_readl(fsl_chan->edma, addr + EDMA_TCD_SADDR(ch));
+ else
+ cur_addr = edma_readl(fsl_chan->edma, addr + EDMA_TCD_DADDR(ch));
+
+ /* figure out the finished and calculate the residue */
+ for (i = 0; i < fsl_chan->edesc->n_tcds; i++) {
+ size = edma_readl(fsl_chan->edma, &(edesc->tcd[i].vtcd->nbytes))
+ * edma_readw(fsl_chan->edma, &(edesc->tcd[i].vtcd->biter));
+ if (dir == DMA_MEM_TO_DEV)
+ dma_addr = edma_readl(fsl_chan->edma,
+ &(edesc->tcd[i].vtcd->saddr));
+ else
+ dma_addr = edma_readl(fsl_chan->edma,
+ &(edesc->tcd[i].vtcd->daddr));
+
+ len -= size;
+ if (cur_addr > dma_addr && cur_addr < dma_addr + size) {
+ len += dma_addr + size - cur_addr;
+ break;
+ }
+ }
+
+ return len;
+}
+
+static enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie, struct dma_tx_state *txstate)
+{
+ struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+ struct virt_dma_desc *vdesc;
+ enum dma_status status;
+ unsigned long flags;
+
+ status = dma_cookie_status(chan, cookie, txstate);
+ if (status == DMA_COMPLETE)
+ return status;
+
+ if (!txstate)
+ return fsl_chan->status;
+
+ spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+ vdesc = vchan_find_desc(&fsl_chan->vchan, cookie);
+ if (fsl_chan->edesc && cookie == fsl_chan->edesc->vdesc.tx.cookie)
+ txstate->residue = fsl_edma_desc_residue(fsl_chan, vdesc, true);
+ else if (vdesc)
+ txstate->residue = fsl_edma_desc_residue(fsl_chan, vdesc, false);
+ else
+ txstate->residue = 0;
+
+ spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+
+ return fsl_chan->status;
+}
+
+static void fsl_edma_set_tcd_params(struct fsl_edma_chan *fsl_chan,
+ u32 src, u32 dst, u16 attr, u16 soff, u32 nbytes,
+ u32 slast, u16 citer, u16 biter, u32 doff, u32 dlast_sga,
+ u16 csr)
+{
+ void __iomem *addr = fsl_chan->edma->membase;
+ u32 ch = fsl_chan->vchan.chan.chan_id;
+
+ /*
+ * TCD parameters have been swapped in fill_tcd_params(),
+ * so just write them to registers in the cpu endian here
+ */
+ writew(0, addr + EDMA_TCD_CSR(ch));
+ writel(src, addr + EDMA_TCD_SADDR(ch));
+ writel(dst, addr + EDMA_TCD_DADDR(ch));
+ writew(attr, addr + EDMA_TCD_ATTR(ch));
+ writew(soff, addr + EDMA_TCD_SOFF(ch));
+ writel(nbytes, addr + EDMA_TCD_NBYTES(ch));
+ writel(slast, addr + EDMA_TCD_SLAST(ch));
+ writew(citer, addr + EDMA_TCD_CITER(ch));
+ writew(biter, addr + EDMA_TCD_BITER(ch));
+ writew(doff, addr + EDMA_TCD_DOFF(ch));
+ writel(dlast_sga, addr + EDMA_TCD_DLAST_SGA(ch));
+ writew(csr, addr + EDMA_TCD_CSR(ch));
+}
+
+static void fill_tcd_params(struct fsl_edma_engine *edma,
+ struct fsl_edma_hw_tcd *tcd, u32 src, u32 dst,
+ u16 attr, u16 soff, u32 nbytes, u32 slast, u16 citer,
+ u16 biter, u16 doff, u32 dlast_sga, bool major_int,
+ bool disable_req, bool enable_sg)
+{
+ u16 csr = 0;
+
+ /*
+ * eDMA hardware SGs require the TCD parameters stored in memory
+ * the same endian as the eDMA module so that they can be loaded
+ * automatically by the engine
+ */
+ edma_writel(edma, src, &(tcd->saddr));
+ edma_writel(edma, dst, &(tcd->daddr));
+ edma_writew(edma, attr, &(tcd->attr));
+ edma_writew(edma, EDMA_TCD_SOFF_SOFF(soff), &(tcd->soff));
+ edma_writel(edma, EDMA_TCD_NBYTES_NBYTES(nbytes), &(tcd->nbytes));
+ edma_writel(edma, EDMA_TCD_SLAST_SLAST(slast), &(tcd->slast));
+ edma_writew(edma, EDMA_TCD_CITER_CITER(citer), &(tcd->citer));
+ edma_writew(edma, EDMA_TCD_DOFF_DOFF(doff), &(tcd->doff));
+ edma_writel(edma, EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga), &(tcd->dlast_sga));
+ edma_writew(edma, EDMA_TCD_BITER_BITER(biter), &(tcd->biter));
+ if (major_int)
+ csr |= EDMA_TCD_CSR_INT_MAJOR;
+
+ if (disable_req)
+ csr |= EDMA_TCD_CSR_D_REQ;
+
+ if (enable_sg)
+ csr |= EDMA_TCD_CSR_E_SG;
+
+ edma_writew(edma, csr, &(tcd->csr));
+}
+
+static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan *fsl_chan,
+ int sg_len)
+{
+ struct fsl_edma_desc *fsl_desc;
+ int i;
+
+ fsl_desc = kzalloc(sizeof(*fsl_desc) + sizeof(struct fsl_edma_sw_tcd) * sg_len,
+ GFP_NOWAIT);
+ if (!fsl_desc)
+ return NULL;
+
+ fsl_desc->echan = fsl_chan;
+ fsl_desc->n_tcds = sg_len;
+ for (i = 0; i < sg_len; i++) {
+ fsl_desc->tcd[i].vtcd = dma_pool_alloc(fsl_chan->tcd_pool,
+ GFP_NOWAIT, &fsl_desc->tcd[i].ptcd);
+ if (!fsl_desc->tcd[i].vtcd)
+ goto err;
+ }
+ return fsl_desc;
+
+err:
+ while (--i >= 0)
+ dma_pool_free(fsl_chan->tcd_pool, fsl_desc->tcd[i].vtcd,
+ fsl_desc->tcd[i].ptcd);
+ kfree(fsl_desc);
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
+ struct dma_chan *chan, dma_addr_t dma_addr, size_t buf_len,
+ size_t period_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+ struct fsl_edma_desc *fsl_desc;
+ dma_addr_t dma_buf_next;
+ int sg_len, i;
+ u32 src_addr, dst_addr, last_sg, nbytes;
+ u16 soff, doff, iter;
+
+ if (!is_slave_direction(fsl_chan->fsc.dir))
+ return NULL;
+
+ sg_len = buf_len / period_len;
+ fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
+ if (!fsl_desc)
+ return NULL;
+ fsl_desc->iscyclic = true;
+
+ dma_buf_next = dma_addr;
+ nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
+ iter = period_len / nbytes;
+
+ for (i = 0; i < sg_len; i++) {
+ if (dma_buf_next >= dma_addr + buf_len)
+ dma_buf_next = dma_addr;
+
+ /* get next sg's physical address */
+ last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
+
+ if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
+ src_addr = dma_buf_next;
+ dst_addr = fsl_chan->fsc.dev_addr;
+ soff = fsl_chan->fsc.addr_width;
+ doff = 0;
+ } else {
+ src_addr = fsl_chan->fsc.dev_addr;
+ dst_addr = dma_buf_next;
+ soff = 0;
+ doff = fsl_chan->fsc.addr_width;
+ }
+
+ fill_tcd_params(fsl_chan->edma, fsl_desc->tcd[i].vtcd, src_addr,
+ dst_addr, fsl_chan->fsc.attr, soff, nbytes, 0,
+ iter, iter, doff, last_sg, true, false, true);
+ dma_buf_next += period_len;
+ }
+
+ return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
+}
+
+static struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl,
+ unsigned int sg_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+ struct fsl_edma_desc *fsl_desc;
+ struct scatterlist *sg;
+ u32 src_addr, dst_addr, last_sg, nbytes;
+ u16 soff, doff, iter;
+ int i;
+
+ if (!is_slave_direction(fsl_chan->fsc.dir))
+ return NULL;
+
+ fsl_desc = fsl_edma_alloc_desc(fsl_chan, sg_len);
+ if (!fsl_desc)
+ return NULL;
+ fsl_desc->iscyclic = false;
+
+ nbytes = fsl_chan->fsc.addr_width * fsl_chan->fsc.burst;
+ for_each_sg(sgl, sg, sg_len, i) {
+ /* get next sg's physical address */
+ last_sg = fsl_desc->tcd[(i + 1) % sg_len].ptcd;
+
+ if (fsl_chan->fsc.dir == DMA_MEM_TO_DEV) {
+ src_addr = sg_dma_address(sg);
+ dst_addr = fsl_chan->fsc.dev_addr;
+ soff = fsl_chan->fsc.addr_width;
+ doff = 0;
+ } else {
+ src_addr = fsl_chan->fsc.dev_addr;
+ dst_addr = sg_dma_address(sg);
+ soff = 0;
+ doff = fsl_chan->fsc.addr_width;
+ }
+
+ iter = sg_dma_len(sg) / nbytes;
+ if (i < sg_len - 1) {
+ last_sg = fsl_desc->tcd[(i + 1)].ptcd;
+ fill_tcd_params(fsl_chan->edma, fsl_desc->tcd[i].vtcd,
+ src_addr, dst_addr, fsl_chan->fsc.attr,
+ soff, nbytes, 0, iter, iter, doff, last_sg,
+ false, false, true);
+ } else {
+ last_sg = 0;
+ fill_tcd_params(fsl_chan->edma, fsl_desc->tcd[i].vtcd,
+ src_addr, dst_addr, fsl_chan->fsc.attr,
+ soff, nbytes, 0, iter, iter, doff, last_sg,
+ true, true, false);
+ }
+ }
+
+ return vchan_tx_prep(&fsl_chan->vchan, &fsl_desc->vdesc, flags);
+}
+
+static void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan)
+{
+ struct fsl_edma_hw_tcd *tcd;
+ struct virt_dma_desc *vdesc;
+
+ vdesc = vchan_next_desc(&fsl_chan->vchan);
+ if (!vdesc)
+ return;
+ fsl_chan->edesc = to_fsl_edma_desc(vdesc);
+ tcd = fsl_chan->edesc->tcd[0].vtcd;
+ fsl_edma_set_tcd_params(fsl_chan, tcd->saddr, tcd->daddr, tcd->attr,
+ tcd->soff, tcd->nbytes, tcd->slast, tcd->citer,
+ tcd->biter, tcd->doff, tcd->dlast_sga, tcd->csr);
+ fsl_edma_enable_request(fsl_chan);
+ fsl_chan->status = DMA_IN_PROGRESS;
+}
+
+static irqreturn_t fsl_edma_tx_handler(int irq, void *dev_id)
+{
+ struct fsl_edma_engine *fsl_edma = dev_id;
+ unsigned int intr, ch;
+ void __iomem *base_addr;
+ struct fsl_edma_chan *fsl_chan;
+
+ base_addr = fsl_edma->membase;
+
+ intr = edma_readl(fsl_edma, base_addr + EDMA_INTR);
+ if (!intr)
+ return IRQ_NONE;
+
+ for (ch = 0; ch < fsl_edma->n_chans; ch++) {
+ if (intr & (0x1 << ch)) {
+ edma_writeb(fsl_edma, EDMA_CINT_CINT(ch),
+ base_addr + EDMA_CINT);
+
+ fsl_chan = &fsl_edma->chans[ch];
+
+ spin_lock(&fsl_chan->vchan.lock);
+ if (!fsl_chan->edesc->iscyclic) {
+ list_del(&fsl_chan->edesc->vdesc.node);
+ vchan_cookie_complete(&fsl_chan->edesc->vdesc);
+ fsl_chan->edesc = NULL;
+ fsl_chan->status = DMA_COMPLETE;
+ } else {
+ vchan_cyclic_callback(&fsl_chan->edesc->vdesc);
+ }
+
+ if (!fsl_chan->edesc)
+ fsl_edma_xfer_desc(fsl_chan);
+
+ spin_unlock(&fsl_chan->vchan.lock);
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fsl_edma_err_handler(int irq, void *dev_id)
+{
+ struct fsl_edma_engine *fsl_edma = dev_id;
+ unsigned int err, ch;
+
+ err = edma_readl(fsl_edma, fsl_edma->membase + EDMA_ERR);
+ if (!err)
+ return IRQ_NONE;
+
+ for (ch = 0; ch < fsl_edma->n_chans; ch++) {
+ if (err & (0x1 << ch)) {
+ fsl_edma_disable_request(&fsl_edma->chans[ch]);
+ edma_writeb(fsl_edma, EDMA_CERR_CERR(ch),
+ fsl_edma->membase + EDMA_CERR);
+ fsl_edma->chans[ch].status = DMA_ERROR;
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fsl_edma_irq_handler(int irq, void *dev_id)
+{
+ if (fsl_edma_tx_handler(irq, dev_id) == IRQ_HANDLED)
+ return IRQ_HANDLED;
+
+ return fsl_edma_err_handler(irq, dev_id);
+}
+
+static void fsl_edma_issue_pending(struct dma_chan *chan)
+{
+ struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+
+ if (vchan_issue_pending(&fsl_chan->vchan) && !fsl_chan->edesc)
+ fsl_edma_xfer_desc(fsl_chan);
+
+ spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+}
+
+static struct dma_chan *fsl_edma_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct fsl_edma_engine *fsl_edma = ofdma->of_dma_data;
+ struct dma_chan *chan, *_chan;
+
+ if (dma_spec->args_count != 2)
+ return NULL;
+
+ mutex_lock(&fsl_edma->fsl_edma_mutex);
+ list_for_each_entry_safe(chan, _chan, &fsl_edma->dma_dev.channels, device_node) {
+ if (chan->client_count)
+ continue;
+ if ((chan->chan_id / DMAMUX_NR) == dma_spec->args[0]) {
+ chan = dma_get_slave_channel(chan);
+ if (chan) {
+ chan->device->privatecnt++;
+ fsl_edma_chan_mux(to_fsl_edma_chan(chan),
+ dma_spec->args[1], true);
+ mutex_unlock(&fsl_edma->fsl_edma_mutex);
+ return chan;
+ }
+ }
+ }
+ mutex_unlock(&fsl_edma->fsl_edma_mutex);
+ return NULL;
+}
+
+static int fsl_edma_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+
+ fsl_chan->tcd_pool = dma_pool_create("tcd_pool", chan->device->dev,
+ sizeof(struct fsl_edma_hw_tcd),
+ 32, 0);
+ return 0;
+}
+
+static void fsl_edma_free_chan_resources(struct dma_chan *chan)
+{
+ struct fsl_edma_chan *fsl_chan = to_fsl_edma_chan(chan);
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&fsl_chan->vchan.lock, flags);
+ fsl_edma_disable_request(fsl_chan);
+ fsl_edma_chan_mux(fsl_chan, 0, false);
+ fsl_chan->edesc = NULL;
+ vchan_get_all_descriptors(&fsl_chan->vchan, &head);
+ spin_unlock_irqrestore(&fsl_chan->vchan.lock, flags);
+
+ vchan_dma_desc_free_list(&fsl_chan->vchan, &head);
+ dma_pool_destroy(fsl_chan->tcd_pool);
+ fsl_chan->tcd_pool = NULL;
+}
+
+static int fsl_dma_device_slave_caps(struct dma_chan *dchan,
+ struct dma_slave_caps *caps)
+{
+ caps->src_addr_widths = FSL_EDMA_BUSWIDTHS;
+ caps->dstn_addr_widths = FSL_EDMA_BUSWIDTHS;
+ caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ caps->cmd_pause = true;
+ caps->cmd_terminate = true;
+
+ return 0;
+}
+
+static int
+fsl_edma_irq_init(struct platform_device *pdev, struct fsl_edma_engine *fsl_edma)
+{
+ int ret;
+
+ fsl_edma->txirq = platform_get_irq_byname(pdev, "edma-tx");
+ if (fsl_edma->txirq < 0) {
+ dev_err(&pdev->dev, "Can't get edma-tx irq.\n");
+ return fsl_edma->txirq;
+ }
+
+ fsl_edma->errirq = platform_get_irq_byname(pdev, "edma-err");
+ if (fsl_edma->errirq < 0) {
+ dev_err(&pdev->dev, "Can't get edma-err irq.\n");
+ return fsl_edma->errirq;
+ }
+
+ if (fsl_edma->txirq == fsl_edma->errirq) {
+ ret = devm_request_irq(&pdev->dev, fsl_edma->txirq,
+ fsl_edma_irq_handler, 0, "eDMA", fsl_edma);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't register eDMA IRQ.\n");
+ return ret;
+ }
+ } else {
+ ret = devm_request_irq(&pdev->dev, fsl_edma->txirq,
+ fsl_edma_tx_handler, 0, "eDMA tx", fsl_edma);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't register eDMA tx IRQ.\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev, fsl_edma->errirq,
+ fsl_edma_err_handler, 0, "eDMA err", fsl_edma);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't register eDMA err IRQ.\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int fsl_edma_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct fsl_edma_engine *fsl_edma;
+ struct fsl_edma_chan *fsl_chan;
+ struct resource *res;
+ int len, chans;
+ int ret, i;
+
+ ret = of_property_read_u32(np, "dma-channels", &chans);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't get dma-channels.\n");
+ return ret;
+ }
+
+ len = sizeof(*fsl_edma) + sizeof(*fsl_chan) * chans;
+ fsl_edma = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
+ if (!fsl_edma)
+ return -ENOMEM;
+
+ fsl_edma->n_chans = chans;
+ mutex_init(&fsl_edma->fsl_edma_mutex);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ fsl_edma->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fsl_edma->membase))
+ return PTR_ERR(fsl_edma->membase);
+
+ for (i = 0; i < DMAMUX_NR; i++) {
+ char clkname[32];
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
+ fsl_edma->muxbase[i] = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fsl_edma->muxbase[i]))
+ return PTR_ERR(fsl_edma->muxbase[i]);
+
+ sprintf(clkname, "dmamux%d", i);
+ fsl_edma->muxclk[i] = devm_clk_get(&pdev->dev, clkname);
+ if (IS_ERR(fsl_edma->muxclk[i])) {
+ dev_err(&pdev->dev, "Missing DMAMUX block clock.\n");
+ return PTR_ERR(fsl_edma->muxclk[i]);
+ }
+
+ ret = clk_prepare_enable(fsl_edma->muxclk[i]);
+ if (ret) {
+ dev_err(&pdev->dev, "DMAMUX clk block failed.\n");
+ return ret;
+ }
+
+ }
+
+ ret = fsl_edma_irq_init(pdev, fsl_edma);
+ if (ret)
+ return ret;
+
+ fsl_edma->big_endian = of_property_read_bool(np, "big-endian");
+
+ INIT_LIST_HEAD(&fsl_edma->dma_dev.channels);
+ for (i = 0; i < fsl_edma->n_chans; i++) {
+ struct fsl_edma_chan *fsl_chan = &fsl_edma->chans[i];
+
+ fsl_chan->edma = fsl_edma;
+
+ fsl_chan->vchan.desc_free = fsl_edma_free_desc;
+ vchan_init(&fsl_chan->vchan, &fsl_edma->dma_dev);
+
+ edma_writew(fsl_edma, 0x0, fsl_edma->membase + EDMA_TCD_CSR(i));
+ fsl_edma_chan_mux(fsl_chan, 0, false);
+ }
+
+ dma_cap_set(DMA_PRIVATE, fsl_edma->dma_dev.cap_mask);
+ dma_cap_set(DMA_SLAVE, fsl_edma->dma_dev.cap_mask);
+ dma_cap_set(DMA_CYCLIC, fsl_edma->dma_dev.cap_mask);
+
+ fsl_edma->dma_dev.dev = &pdev->dev;
+ fsl_edma->dma_dev.device_alloc_chan_resources
+ = fsl_edma_alloc_chan_resources;
+ fsl_edma->dma_dev.device_free_chan_resources
+ = fsl_edma_free_chan_resources;
+ fsl_edma->dma_dev.device_tx_status = fsl_edma_tx_status;
+ fsl_edma->dma_dev.device_prep_slave_sg = fsl_edma_prep_slave_sg;
+ fsl_edma->dma_dev.device_prep_dma_cyclic = fsl_edma_prep_dma_cyclic;
+ fsl_edma->dma_dev.device_control = fsl_edma_control;
+ fsl_edma->dma_dev.device_issue_pending = fsl_edma_issue_pending;
+ fsl_edma->dma_dev.device_slave_caps = fsl_dma_device_slave_caps;
+
+ platform_set_drvdata(pdev, fsl_edma);
+
+ ret = dma_async_device_register(&fsl_edma->dma_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't register Freescale eDMA engine.\n");
+ return ret;
+ }
+
+ ret = of_dma_controller_register(np, fsl_edma_xlate, fsl_edma);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't register Freescale eDMA of_dma.\n");
+ dma_async_device_unregister(&fsl_edma->dma_dev);
+ return ret;
+ }
+
+ /* enable round robin arbitration */
+ edma_writel(fsl_edma, EDMA_CR_ERGA | EDMA_CR_ERCA, fsl_edma->membase + EDMA_CR);
+
+ return 0;
+}
+
+static int fsl_edma_remove(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct fsl_edma_engine *fsl_edma = platform_get_drvdata(pdev);
+ int i;
+
+ of_dma_controller_free(np);
+ dma_async_device_unregister(&fsl_edma->dma_dev);
+
+ for (i = 0; i < DMAMUX_NR; i++)
+ clk_disable_unprepare(fsl_edma->muxclk[i]);
+
+ return 0;
+}
+
+static const struct of_device_id fsl_edma_dt_ids[] = {
+ { .compatible = "fsl,vf610-edma", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_edma_dt_ids);
+
+static struct platform_driver fsl_edma_driver = {
+ .driver = {
+ .name = "fsl-edma",
+ .owner = THIS_MODULE,
+ .of_match_table = fsl_edma_dt_ids,
+ },
+ .probe = fsl_edma_probe,
+ .remove = fsl_edma_remove,
+};
+
+module_platform_driver(fsl_edma_driver);
+
+MODULE_ALIAS("platform:fsl-edma");
+MODULE_DESCRIPTION("Freescale eDMA engine driver");
+MODULE_LICENSE("GPL v2");
/* Tasklet error handler */
tasklet_schedule(&imxdma->channel[i].dma_tasklet);
- printk(KERN_WARNING
- "DMA timeout on channel %d -%s%s%s%s\n", i,
- errcode & IMX_DMA_ERR_BURST ? " burst" : "",
- errcode & IMX_DMA_ERR_REQUEST ? " request" : "",
- errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
- errcode & IMX_DMA_ERR_BUFFER ? " buffer" : "");
+ dev_warn(imxdma->dev,
+ "DMA timeout on channel %d -%s%s%s%s\n", i,
+ errcode & IMX_DMA_ERR_BURST ? " burst" : "",
+ errcode & IMX_DMA_ERR_REQUEST ? " request" : "",
+ errcode & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
+ errcode & IMX_DMA_ERR_BUFFER ? " buffer" : "");
}
return IRQ_HANDLED;
}
static struct platform_driver imxdma_driver = {
.driver = {
.name = "imx-dma",
+ .owner = THIS_MODULE,
.of_match_table = imx_dma_of_dev_id,
},
.id_table = imx_dma_devtype,
phy->base = pdev->base;
if (irq) {
- ret = devm_request_irq(pdev->dev, irq, mmp_pdma_chan_handler, 0,
- "pdma", phy);
+ ret = devm_request_irq(pdev->dev, irq, mmp_pdma_chan_handler,
+ IRQF_SHARED, "pdma", phy);
if (ret) {
dev_err(pdev->dev, "channel request irq fail!\n");
return ret;
if (irq_num != dma_channels) {
/* all chan share one irq, demux inside */
irq = platform_get_irq(op, 0);
- ret = devm_request_irq(pdev->dev, irq, mmp_pdma_int_handler, 0,
- "pdma", pdev);
+ ret = devm_request_irq(pdev->dev, irq, mmp_pdma_int_handler,
+ IRQF_SHARED, "pdma", pdev);
if (ret)
return ret;
}
#include <mach/regs-icu.h>
#include <linux/platform_data/dma-mmp_tdma.h>
#include <linux/of_device.h>
+#include <linux/of_dma.h>
#include "dmaengine.h"
return 0;
}
+struct mmp_tdma_filter_param {
+ struct device_node *of_node;
+ unsigned int chan_id;
+};
+
+static bool mmp_tdma_filter_fn(struct dma_chan *chan, void *fn_param)
+{
+ struct mmp_tdma_filter_param *param = fn_param;
+ struct mmp_tdma_chan *tdmac = to_mmp_tdma_chan(chan);
+ struct dma_device *pdma_device = tdmac->chan.device;
+
+ if (pdma_device->dev->of_node != param->of_node)
+ return false;
+
+ if (chan->chan_id != param->chan_id)
+ return false;
+
+ return true;
+}
+
+struct dma_chan *mmp_tdma_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct mmp_tdma_device *tdev = ofdma->of_dma_data;
+ dma_cap_mask_t mask = tdev->device.cap_mask;
+ struct mmp_tdma_filter_param param;
+
+ if (dma_spec->args_count != 1)
+ return NULL;
+
+ param.of_node = ofdma->of_node;
+ param.chan_id = dma_spec->args[0];
+
+ if (param.chan_id >= TDMA_CHANNEL_NUM)
+ return NULL;
+
+ return dma_request_channel(mask, mmp_tdma_filter_fn, ¶m);
+}
+
static struct of_device_id mmp_tdma_dt_ids[] = {
{ .compatible = "marvell,adma-1.0", .data = (void *)MMP_AUD_TDMA},
{ .compatible = "marvell,pxa910-squ", .data = (void *)PXA910_SQU},
return ret;
}
+ if (pdev->dev.of_node) {
+ ret = of_dma_controller_register(pdev->dev.of_node,
+ mmp_tdma_xlate, tdev);
+ if (ret) {
+ dev_err(tdev->device.dev,
+ "failed to register controller\n");
+ dma_async_device_unregister(&tdev->device);
+ }
+ }
+
dev_info(tdev->device.dev, "initialized\n");
return 0;
}
}
}
+#define OMAP_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+
+static int omap_dma_device_slave_caps(struct dma_chan *dchan,
+ struct dma_slave_caps *caps)
+{
+ caps->src_addr_widths = OMAP_DMA_BUSWIDTHS;
+ caps->dstn_addr_widths = OMAP_DMA_BUSWIDTHS;
+ caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ caps->cmd_pause = true;
+ caps->cmd_terminate = true;
+ caps->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+
+ return 0;
+}
+
static int omap_dma_probe(struct platform_device *pdev)
{
struct omap_dmadev *od;
od->ddev.device_prep_slave_sg = omap_dma_prep_slave_sg;
od->ddev.device_prep_dma_cyclic = omap_dma_prep_dma_cyclic;
od->ddev.device_control = omap_dma_control;
+ od->ddev.device_slave_caps = omap_dma_device_slave_caps;
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);
INIT_LIST_HEAD(&od->pending);
if (pd) {
dma_async_device_unregister(&pd->dma);
+ free_irq(pdev->irq, pd);
+
list_for_each_entry_safe(chan, _c, &pd->dma.channels,
device_node) {
pd_chan = to_pd_chan(chan);
- tasklet_disable(&pd_chan->tasklet);
tasklet_kill(&pd_chan->tasklet);
}
pci_pool_destroy(pd->pool);
- free_irq(pdev->irq, pd);
pci_iounmap(pdev, pd->membase);
pci_release_regions(pdev);
pci_disable_device(pdev);
--- /dev/null
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+/*
+ * QCOM BAM DMA engine driver
+ *
+ * QCOM BAM DMA blocks are distributed amongst a number of the on-chip
+ * peripherals on the MSM 8x74. The configuration of the channels are dependent
+ * on the way they are hard wired to that specific peripheral. The peripheral
+ * device tree entries specify the configuration of each channel.
+ *
+ * The DMA controller requires the use of external memory for storage of the
+ * hardware descriptors for each channel. The descriptor FIFO is accessed as a
+ * circular buffer and operations are managed according to the offset within the
+ * FIFO. After pipe/channel reset, all of the pipe registers and internal state
+ * are back to defaults.
+ *
+ * During DMA operations, we write descriptors to the FIFO, being careful to
+ * handle wrapping and then write the last FIFO offset to that channel's
+ * P_EVNT_REG register to kick off the transaction. The P_SW_OFSTS register
+ * indicates the current FIFO offset that is being processed, so there is some
+ * indication of where the hardware is currently working.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+struct bam_desc_hw {
+ u32 addr; /* Buffer physical address */
+ u16 size; /* Buffer size in bytes */
+ u16 flags;
+};
+
+#define DESC_FLAG_INT BIT(15)
+#define DESC_FLAG_EOT BIT(14)
+#define DESC_FLAG_EOB BIT(13)
+
+struct bam_async_desc {
+ struct virt_dma_desc vd;
+
+ u32 num_desc;
+ u32 xfer_len;
+ struct bam_desc_hw *curr_desc;
+
+ enum dma_transfer_direction dir;
+ size_t length;
+ struct bam_desc_hw desc[0];
+};
+
+#define BAM_CTRL 0x0000
+#define BAM_REVISION 0x0004
+#define BAM_SW_REVISION 0x0080
+#define BAM_NUM_PIPES 0x003C
+#define BAM_TIMER 0x0040
+#define BAM_TIMER_CTRL 0x0044
+#define BAM_DESC_CNT_TRSHLD 0x0008
+#define BAM_IRQ_SRCS 0x000C
+#define BAM_IRQ_SRCS_MSK 0x0010
+#define BAM_IRQ_SRCS_UNMASKED 0x0030
+#define BAM_IRQ_STTS 0x0014
+#define BAM_IRQ_CLR 0x0018
+#define BAM_IRQ_EN 0x001C
+#define BAM_CNFG_BITS 0x007C
+#define BAM_IRQ_SRCS_EE(ee) (0x0800 + ((ee) * 0x80))
+#define BAM_IRQ_SRCS_MSK_EE(ee) (0x0804 + ((ee) * 0x80))
+#define BAM_P_CTRL(pipe) (0x1000 + ((pipe) * 0x1000))
+#define BAM_P_RST(pipe) (0x1004 + ((pipe) * 0x1000))
+#define BAM_P_HALT(pipe) (0x1008 + ((pipe) * 0x1000))
+#define BAM_P_IRQ_STTS(pipe) (0x1010 + ((pipe) * 0x1000))
+#define BAM_P_IRQ_CLR(pipe) (0x1014 + ((pipe) * 0x1000))
+#define BAM_P_IRQ_EN(pipe) (0x1018 + ((pipe) * 0x1000))
+#define BAM_P_EVNT_DEST_ADDR(pipe) (0x182C + ((pipe) * 0x1000))
+#define BAM_P_EVNT_REG(pipe) (0x1818 + ((pipe) * 0x1000))
+#define BAM_P_SW_OFSTS(pipe) (0x1800 + ((pipe) * 0x1000))
+#define BAM_P_DATA_FIFO_ADDR(pipe) (0x1824 + ((pipe) * 0x1000))
+#define BAM_P_DESC_FIFO_ADDR(pipe) (0x181C + ((pipe) * 0x1000))
+#define BAM_P_EVNT_TRSHLD(pipe) (0x1828 + ((pipe) * 0x1000))
+#define BAM_P_FIFO_SIZES(pipe) (0x1820 + ((pipe) * 0x1000))
+
+/* BAM CTRL */
+#define BAM_SW_RST BIT(0)
+#define BAM_EN BIT(1)
+#define BAM_EN_ACCUM BIT(4)
+#define BAM_TESTBUS_SEL_SHIFT 5
+#define BAM_TESTBUS_SEL_MASK 0x3F
+#define BAM_DESC_CACHE_SEL_SHIFT 13
+#define BAM_DESC_CACHE_SEL_MASK 0x3
+#define BAM_CACHED_DESC_STORE BIT(15)
+#define IBC_DISABLE BIT(16)
+
+/* BAM REVISION */
+#define REVISION_SHIFT 0
+#define REVISION_MASK 0xFF
+#define NUM_EES_SHIFT 8
+#define NUM_EES_MASK 0xF
+#define CE_BUFFER_SIZE BIT(13)
+#define AXI_ACTIVE BIT(14)
+#define USE_VMIDMT BIT(15)
+#define SECURED BIT(16)
+#define BAM_HAS_NO_BYPASS BIT(17)
+#define HIGH_FREQUENCY_BAM BIT(18)
+#define INACTIV_TMRS_EXST BIT(19)
+#define NUM_INACTIV_TMRS BIT(20)
+#define DESC_CACHE_DEPTH_SHIFT 21
+#define DESC_CACHE_DEPTH_1 (0 << DESC_CACHE_DEPTH_SHIFT)
+#define DESC_CACHE_DEPTH_2 (1 << DESC_CACHE_DEPTH_SHIFT)
+#define DESC_CACHE_DEPTH_3 (2 << DESC_CACHE_DEPTH_SHIFT)
+#define DESC_CACHE_DEPTH_4 (3 << DESC_CACHE_DEPTH_SHIFT)
+#define CMD_DESC_EN BIT(23)
+#define INACTIV_TMR_BASE_SHIFT 24
+#define INACTIV_TMR_BASE_MASK 0xFF
+
+/* BAM NUM PIPES */
+#define BAM_NUM_PIPES_SHIFT 0
+#define BAM_NUM_PIPES_MASK 0xFF
+#define PERIPH_NON_PIPE_GRP_SHIFT 16
+#define PERIPH_NON_PIP_GRP_MASK 0xFF
+#define BAM_NON_PIPE_GRP_SHIFT 24
+#define BAM_NON_PIPE_GRP_MASK 0xFF
+
+/* BAM CNFG BITS */
+#define BAM_PIPE_CNFG BIT(2)
+#define BAM_FULL_PIPE BIT(11)
+#define BAM_NO_EXT_P_RST BIT(12)
+#define BAM_IBC_DISABLE BIT(13)
+#define BAM_SB_CLK_REQ BIT(14)
+#define BAM_PSM_CSW_REQ BIT(15)
+#define BAM_PSM_P_RES BIT(16)
+#define BAM_AU_P_RES BIT(17)
+#define BAM_SI_P_RES BIT(18)
+#define BAM_WB_P_RES BIT(19)
+#define BAM_WB_BLK_CSW BIT(20)
+#define BAM_WB_CSW_ACK_IDL BIT(21)
+#define BAM_WB_RETR_SVPNT BIT(22)
+#define BAM_WB_DSC_AVL_P_RST BIT(23)
+#define BAM_REG_P_EN BIT(24)
+#define BAM_PSM_P_HD_DATA BIT(25)
+#define BAM_AU_ACCUMED BIT(26)
+#define BAM_CMD_ENABLE BIT(27)
+
+#define BAM_CNFG_BITS_DEFAULT (BAM_PIPE_CNFG | \
+ BAM_NO_EXT_P_RST | \
+ BAM_IBC_DISABLE | \
+ BAM_SB_CLK_REQ | \
+ BAM_PSM_CSW_REQ | \
+ BAM_PSM_P_RES | \
+ BAM_AU_P_RES | \
+ BAM_SI_P_RES | \
+ BAM_WB_P_RES | \
+ BAM_WB_BLK_CSW | \
+ BAM_WB_CSW_ACK_IDL | \
+ BAM_WB_RETR_SVPNT | \
+ BAM_WB_DSC_AVL_P_RST | \
+ BAM_REG_P_EN | \
+ BAM_PSM_P_HD_DATA | \
+ BAM_AU_ACCUMED | \
+ BAM_CMD_ENABLE)
+
+/* PIPE CTRL */
+#define P_EN BIT(1)
+#define P_DIRECTION BIT(3)
+#define P_SYS_STRM BIT(4)
+#define P_SYS_MODE BIT(5)
+#define P_AUTO_EOB BIT(6)
+#define P_AUTO_EOB_SEL_SHIFT 7
+#define P_AUTO_EOB_SEL_512 (0 << P_AUTO_EOB_SEL_SHIFT)
+#define P_AUTO_EOB_SEL_256 (1 << P_AUTO_EOB_SEL_SHIFT)
+#define P_AUTO_EOB_SEL_128 (2 << P_AUTO_EOB_SEL_SHIFT)
+#define P_AUTO_EOB_SEL_64 (3 << P_AUTO_EOB_SEL_SHIFT)
+#define P_PREFETCH_LIMIT_SHIFT 9
+#define P_PREFETCH_LIMIT_32 (0 << P_PREFETCH_LIMIT_SHIFT)
+#define P_PREFETCH_LIMIT_16 (1 << P_PREFETCH_LIMIT_SHIFT)
+#define P_PREFETCH_LIMIT_4 (2 << P_PREFETCH_LIMIT_SHIFT)
+#define P_WRITE_NWD BIT(11)
+#define P_LOCK_GROUP_SHIFT 16
+#define P_LOCK_GROUP_MASK 0x1F
+
+/* BAM_DESC_CNT_TRSHLD */
+#define CNT_TRSHLD 0xffff
+#define DEFAULT_CNT_THRSHLD 0x4
+
+/* BAM_IRQ_SRCS */
+#define BAM_IRQ BIT(31)
+#define P_IRQ 0x7fffffff
+
+/* BAM_IRQ_SRCS_MSK */
+#define BAM_IRQ_MSK BAM_IRQ
+#define P_IRQ_MSK P_IRQ
+
+/* BAM_IRQ_STTS */
+#define BAM_TIMER_IRQ BIT(4)
+#define BAM_EMPTY_IRQ BIT(3)
+#define BAM_ERROR_IRQ BIT(2)
+#define BAM_HRESP_ERR_IRQ BIT(1)
+
+/* BAM_IRQ_CLR */
+#define BAM_TIMER_CLR BIT(4)
+#define BAM_EMPTY_CLR BIT(3)
+#define BAM_ERROR_CLR BIT(2)
+#define BAM_HRESP_ERR_CLR BIT(1)
+
+/* BAM_IRQ_EN */
+#define BAM_TIMER_EN BIT(4)
+#define BAM_EMPTY_EN BIT(3)
+#define BAM_ERROR_EN BIT(2)
+#define BAM_HRESP_ERR_EN BIT(1)
+
+/* BAM_P_IRQ_EN */
+#define P_PRCSD_DESC_EN BIT(0)
+#define P_TIMER_EN BIT(1)
+#define P_WAKE_EN BIT(2)
+#define P_OUT_OF_DESC_EN BIT(3)
+#define P_ERR_EN BIT(4)
+#define P_TRNSFR_END_EN BIT(5)
+#define P_DEFAULT_IRQS_EN (P_PRCSD_DESC_EN | P_ERR_EN | P_TRNSFR_END_EN)
+
+/* BAM_P_SW_OFSTS */
+#define P_SW_OFSTS_MASK 0xffff
+
+#define BAM_DESC_FIFO_SIZE SZ_32K
+#define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1)
+#define BAM_MAX_DATA_SIZE (SZ_32K - 8)
+
+struct bam_chan {
+ struct virt_dma_chan vc;
+
+ struct bam_device *bdev;
+
+ /* configuration from device tree */
+ u32 id;
+
+ struct bam_async_desc *curr_txd; /* current running dma */
+
+ /* runtime configuration */
+ struct dma_slave_config slave;
+
+ /* fifo storage */
+ struct bam_desc_hw *fifo_virt;
+ dma_addr_t fifo_phys;
+
+ /* fifo markers */
+ unsigned short head; /* start of active descriptor entries */
+ unsigned short tail; /* end of active descriptor entries */
+
+ unsigned int initialized; /* is the channel hw initialized? */
+ unsigned int paused; /* is the channel paused? */
+ unsigned int reconfigure; /* new slave config? */
+
+ struct list_head node;
+};
+
+static inline struct bam_chan *to_bam_chan(struct dma_chan *common)
+{
+ return container_of(common, struct bam_chan, vc.chan);
+}
+
+struct bam_device {
+ void __iomem *regs;
+ struct device *dev;
+ struct dma_device common;
+ struct device_dma_parameters dma_parms;
+ struct bam_chan *channels;
+ u32 num_channels;
+
+ /* execution environment ID, from DT */
+ u32 ee;
+
+ struct clk *bamclk;
+ int irq;
+
+ /* dma start transaction tasklet */
+ struct tasklet_struct task;
+};
+
+/**
+ * bam_reset_channel - Reset individual BAM DMA channel
+ * @bchan: bam channel
+ *
+ * This function resets a specific BAM channel
+ */
+static void bam_reset_channel(struct bam_chan *bchan)
+{
+ struct bam_device *bdev = bchan->bdev;
+
+ lockdep_assert_held(&bchan->vc.lock);
+
+ /* reset channel */
+ writel_relaxed(1, bdev->regs + BAM_P_RST(bchan->id));
+ writel_relaxed(0, bdev->regs + BAM_P_RST(bchan->id));
+
+ /* don't allow cpu to reorder BAM register accesses done after this */
+ wmb();
+
+ /* make sure hw is initialized when channel is used the first time */
+ bchan->initialized = 0;
+}
+
+/**
+ * bam_chan_init_hw - Initialize channel hardware
+ * @bchan: bam channel
+ *
+ * This function resets and initializes the BAM channel
+ */
+static void bam_chan_init_hw(struct bam_chan *bchan,
+ enum dma_transfer_direction dir)
+{
+ struct bam_device *bdev = bchan->bdev;
+ u32 val;
+
+ /* Reset the channel to clear internal state of the FIFO */
+ bam_reset_channel(bchan);
+
+ /*
+ * write out 8 byte aligned address. We have enough space for this
+ * because we allocated 1 more descriptor (8 bytes) than we can use
+ */
+ writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)),
+ bdev->regs + BAM_P_DESC_FIFO_ADDR(bchan->id));
+ writel_relaxed(BAM_DESC_FIFO_SIZE, bdev->regs +
+ BAM_P_FIFO_SIZES(bchan->id));
+
+ /* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */
+ writel_relaxed(P_DEFAULT_IRQS_EN, bdev->regs + BAM_P_IRQ_EN(bchan->id));
+
+ /* unmask the specific pipe and EE combo */
+ val = readl_relaxed(bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
+ val |= BIT(bchan->id);
+ writel_relaxed(val, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
+
+ /* don't allow cpu to reorder the channel enable done below */
+ wmb();
+
+ /* set fixed direction and mode, then enable channel */
+ val = P_EN | P_SYS_MODE;
+ if (dir == DMA_DEV_TO_MEM)
+ val |= P_DIRECTION;
+
+ writel_relaxed(val, bdev->regs + BAM_P_CTRL(bchan->id));
+
+ bchan->initialized = 1;
+
+ /* init FIFO pointers */
+ bchan->head = 0;
+ bchan->tail = 0;
+}
+
+/**
+ * bam_alloc_chan - Allocate channel resources for DMA channel.
+ * @chan: specified channel
+ *
+ * This function allocates the FIFO descriptor memory
+ */
+static int bam_alloc_chan(struct dma_chan *chan)
+{
+ struct bam_chan *bchan = to_bam_chan(chan);
+ struct bam_device *bdev = bchan->bdev;
+
+ if (bchan->fifo_virt)
+ return 0;
+
+ /* allocate FIFO descriptor space, but only if necessary */
+ bchan->fifo_virt = dma_alloc_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE,
+ &bchan->fifo_phys, GFP_KERNEL);
+
+ if (!bchan->fifo_virt) {
+ dev_err(bdev->dev, "Failed to allocate desc fifo\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * bam_free_chan - Frees dma resources associated with specific channel
+ * @chan: specified channel
+ *
+ * Free the allocated fifo descriptor memory and channel resources
+ *
+ */
+static void bam_free_chan(struct dma_chan *chan)
+{
+ struct bam_chan *bchan = to_bam_chan(chan);
+ struct bam_device *bdev = bchan->bdev;
+ u32 val;
+ unsigned long flags;
+
+ vchan_free_chan_resources(to_virt_chan(chan));
+
+ if (bchan->curr_txd) {
+ dev_err(bchan->bdev->dev, "Cannot free busy channel\n");
+ return;
+ }
+
+ spin_lock_irqsave(&bchan->vc.lock, flags);
+ bam_reset_channel(bchan);
+ spin_unlock_irqrestore(&bchan->vc.lock, flags);
+
+ dma_free_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE, bchan->fifo_virt,
+ bchan->fifo_phys);
+ bchan->fifo_virt = NULL;
+
+ /* mask irq for pipe/channel */
+ val = readl_relaxed(bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
+ val &= ~BIT(bchan->id);
+ writel_relaxed(val, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
+
+ /* disable irq */
+ writel_relaxed(0, bdev->regs + BAM_P_IRQ_EN(bchan->id));
+}
+
+/**
+ * bam_slave_config - set slave configuration for channel
+ * @chan: dma channel
+ * @cfg: slave configuration
+ *
+ * Sets slave configuration for channel
+ *
+ */
+static void bam_slave_config(struct bam_chan *bchan,
+ struct dma_slave_config *cfg)
+{
+ memcpy(&bchan->slave, cfg, sizeof(*cfg));
+ bchan->reconfigure = 1;
+}
+
+/**
+ * bam_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
+ struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction direction, unsigned long flags,
+ void *context)
+{
+ struct bam_chan *bchan = to_bam_chan(chan);
+ struct bam_device *bdev = bchan->bdev;
+ struct bam_async_desc *async_desc;
+ struct scatterlist *sg;
+ u32 i;
+ struct bam_desc_hw *desc;
+ unsigned int num_alloc = 0;
+
+
+ if (!is_slave_direction(direction)) {
+ dev_err(bdev->dev, "invalid dma direction\n");
+ return NULL;
+ }
+
+ /* calculate number of required entries */
+ for_each_sg(sgl, sg, sg_len, i)
+ num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_MAX_DATA_SIZE);
+
+ /* allocate enough room to accomodate the number of entries */
+ async_desc = kzalloc(sizeof(*async_desc) +
+ (num_alloc * sizeof(struct bam_desc_hw)), GFP_NOWAIT);
+
+ if (!async_desc)
+ goto err_out;
+
+ async_desc->num_desc = num_alloc;
+ async_desc->curr_desc = async_desc->desc;
+ async_desc->dir = direction;
+
+ /* fill in temporary descriptors */
+ desc = async_desc->desc;
+ for_each_sg(sgl, sg, sg_len, i) {
+ unsigned int remainder = sg_dma_len(sg);
+ unsigned int curr_offset = 0;
+
+ do {
+ desc->addr = sg_dma_address(sg) + curr_offset;
+
+ if (remainder > BAM_MAX_DATA_SIZE) {
+ desc->size = BAM_MAX_DATA_SIZE;
+ remainder -= BAM_MAX_DATA_SIZE;
+ curr_offset += BAM_MAX_DATA_SIZE;
+ } else {
+ desc->size = remainder;
+ remainder = 0;
+ }
+
+ async_desc->length += desc->size;
+ desc++;
+ } while (remainder > 0);
+ }
+
+ return vchan_tx_prep(&bchan->vc, &async_desc->vd, flags);
+
+err_out:
+ kfree(async_desc);
+ return NULL;
+}
+
+/**
+ * bam_dma_terminate_all - terminate all transactions on a channel
+ * @bchan: bam dma channel
+ *
+ * Dequeues and frees all transactions
+ * No callbacks are done
+ *
+ */
+static void bam_dma_terminate_all(struct bam_chan *bchan)
+{
+ unsigned long flag;
+ LIST_HEAD(head);
+
+ /* remove all transactions, including active transaction */
+ spin_lock_irqsave(&bchan->vc.lock, flag);
+ if (bchan->curr_txd) {
+ list_add(&bchan->curr_txd->vd.node, &bchan->vc.desc_issued);
+ bchan->curr_txd = NULL;
+ }
+
+ vchan_get_all_descriptors(&bchan->vc, &head);
+ spin_unlock_irqrestore(&bchan->vc.lock, flag);
+
+ vchan_dma_desc_free_list(&bchan->vc, &head);
+}
+
+/**
+ * bam_control - DMA device control
+ * @chan: dma channel
+ * @cmd: control cmd
+ * @arg: cmd argument
+ *
+ * Perform DMA control command
+ *
+ */
+static int bam_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+ unsigned long arg)
+{
+ struct bam_chan *bchan = to_bam_chan(chan);
+ struct bam_device *bdev = bchan->bdev;
+ int ret = 0;
+ unsigned long flag;
+
+ switch (cmd) {
+ case DMA_PAUSE:
+ spin_lock_irqsave(&bchan->vc.lock, flag);
+ writel_relaxed(1, bdev->regs + BAM_P_HALT(bchan->id));
+ bchan->paused = 1;
+ spin_unlock_irqrestore(&bchan->vc.lock, flag);
+ break;
+
+ case DMA_RESUME:
+ spin_lock_irqsave(&bchan->vc.lock, flag);
+ writel_relaxed(0, bdev->regs + BAM_P_HALT(bchan->id));
+ bchan->paused = 0;
+ spin_unlock_irqrestore(&bchan->vc.lock, flag);
+ break;
+
+ case DMA_TERMINATE_ALL:
+ bam_dma_terminate_all(bchan);
+ break;
+
+ case DMA_SLAVE_CONFIG:
+ spin_lock_irqsave(&bchan->vc.lock, flag);
+ bam_slave_config(bchan, (struct dma_slave_config *)arg);
+ spin_unlock_irqrestore(&bchan->vc.lock, flag);
+ break;
+
+ default:
+ ret = -ENXIO;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * process_channel_irqs - processes the channel interrupts
+ * @bdev: bam controller
+ *
+ * This function processes the channel interrupts
+ *
+ */
+static u32 process_channel_irqs(struct bam_device *bdev)
+{
+ u32 i, srcs, pipe_stts;
+ unsigned long flags;
+ struct bam_async_desc *async_desc;
+
+ srcs = readl_relaxed(bdev->regs + BAM_IRQ_SRCS_EE(bdev->ee));
+
+ /* return early if no pipe/channel interrupts are present */
+ if (!(srcs & P_IRQ))
+ return srcs;
+
+ for (i = 0; i < bdev->num_channels; i++) {
+ struct bam_chan *bchan = &bdev->channels[i];
+
+ if (!(srcs & BIT(i)))
+ continue;
+
+ /* clear pipe irq */
+ pipe_stts = readl_relaxed(bdev->regs +
+ BAM_P_IRQ_STTS(i));
+
+ writel_relaxed(pipe_stts, bdev->regs +
+ BAM_P_IRQ_CLR(i));
+
+ spin_lock_irqsave(&bchan->vc.lock, flags);
+ async_desc = bchan->curr_txd;
+
+ if (async_desc) {
+ async_desc->num_desc -= async_desc->xfer_len;
+ async_desc->curr_desc += async_desc->xfer_len;
+ bchan->curr_txd = NULL;
+
+ /* manage FIFO */
+ bchan->head += async_desc->xfer_len;
+ bchan->head %= MAX_DESCRIPTORS;
+
+ /*
+ * if complete, process cookie. Otherwise
+ * push back to front of desc_issued so that
+ * it gets restarted by the tasklet
+ */
+ if (!async_desc->num_desc)
+ vchan_cookie_complete(&async_desc->vd);
+ else
+ list_add(&async_desc->vd.node,
+ &bchan->vc.desc_issued);
+ }
+
+ spin_unlock_irqrestore(&bchan->vc.lock, flags);
+ }
+
+ return srcs;
+}
+
+/**
+ * bam_dma_irq - irq handler for bam controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t bam_dma_irq(int irq, void *data)
+{
+ struct bam_device *bdev = data;
+ u32 clr_mask = 0, srcs = 0;
+
+ srcs |= process_channel_irqs(bdev);
+
+ /* kick off tasklet to start next dma transfer */
+ if (srcs & P_IRQ)
+ tasklet_schedule(&bdev->task);
+
+ if (srcs & BAM_IRQ)
+ clr_mask = readl_relaxed(bdev->regs + BAM_IRQ_STTS);
+
+ /* don't allow reorder of the various accesses to the BAM registers */
+ mb();
+
+ writel_relaxed(clr_mask, bdev->regs + BAM_IRQ_CLR);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * bam_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct bam_chan *bchan = to_bam_chan(chan);
+ struct virt_dma_desc *vd;
+ int ret;
+ size_t residue = 0;
+ unsigned int i;
+ unsigned long flags;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE)
+ return ret;
+
+ if (!txstate)
+ return bchan->paused ? DMA_PAUSED : ret;
+
+ spin_lock_irqsave(&bchan->vc.lock, flags);
+ vd = vchan_find_desc(&bchan->vc, cookie);
+ if (vd)
+ residue = container_of(vd, struct bam_async_desc, vd)->length;
+ else if (bchan->curr_txd && bchan->curr_txd->vd.tx.cookie == cookie)
+ for (i = 0; i < bchan->curr_txd->num_desc; i++)
+ residue += bchan->curr_txd->curr_desc[i].size;
+
+ spin_unlock_irqrestore(&bchan->vc.lock, flags);
+
+ dma_set_residue(txstate, residue);
+
+ if (ret == DMA_IN_PROGRESS && bchan->paused)
+ ret = DMA_PAUSED;
+
+ return ret;
+}
+
+/**
+ * bam_apply_new_config
+ * @bchan: bam dma channel
+ * @dir: DMA direction
+ */
+static void bam_apply_new_config(struct bam_chan *bchan,
+ enum dma_transfer_direction dir)
+{
+ struct bam_device *bdev = bchan->bdev;
+ u32 maxburst;
+
+ if (dir == DMA_DEV_TO_MEM)
+ maxburst = bchan->slave.src_maxburst;
+ else
+ maxburst = bchan->slave.dst_maxburst;
+
+ writel_relaxed(maxburst, bdev->regs + BAM_DESC_CNT_TRSHLD);
+
+ bchan->reconfigure = 0;
+}
+
+/**
+ * bam_start_dma - start next transaction
+ * @bchan - bam dma channel
+ */
+static void bam_start_dma(struct bam_chan *bchan)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc);
+ struct bam_device *bdev = bchan->bdev;
+ struct bam_async_desc *async_desc;
+ struct bam_desc_hw *desc;
+ struct bam_desc_hw *fifo = PTR_ALIGN(bchan->fifo_virt,
+ sizeof(struct bam_desc_hw));
+
+ lockdep_assert_held(&bchan->vc.lock);
+
+ if (!vd)
+ return;
+
+ list_del(&vd->node);
+
+ async_desc = container_of(vd, struct bam_async_desc, vd);
+ bchan->curr_txd = async_desc;
+
+ /* on first use, initialize the channel hardware */
+ if (!bchan->initialized)
+ bam_chan_init_hw(bchan, async_desc->dir);
+
+ /* apply new slave config changes, if necessary */
+ if (bchan->reconfigure)
+ bam_apply_new_config(bchan, async_desc->dir);
+
+ desc = bchan->curr_txd->curr_desc;
+
+ if (async_desc->num_desc > MAX_DESCRIPTORS)
+ async_desc->xfer_len = MAX_DESCRIPTORS;
+ else
+ async_desc->xfer_len = async_desc->num_desc;
+
+ /* set INT on last descriptor */
+ desc[async_desc->xfer_len - 1].flags |= DESC_FLAG_INT;
+
+ if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) {
+ u32 partial = MAX_DESCRIPTORS - bchan->tail;
+
+ memcpy(&fifo[bchan->tail], desc,
+ partial * sizeof(struct bam_desc_hw));
+ memcpy(fifo, &desc[partial], (async_desc->xfer_len - partial) *
+ sizeof(struct bam_desc_hw));
+ } else {
+ memcpy(&fifo[bchan->tail], desc,
+ async_desc->xfer_len * sizeof(struct bam_desc_hw));
+ }
+
+ bchan->tail += async_desc->xfer_len;
+ bchan->tail %= MAX_DESCRIPTORS;
+
+ /* ensure descriptor writes and dma start not reordered */
+ wmb();
+ writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw),
+ bdev->regs + BAM_P_EVNT_REG(bchan->id));
+}
+
+/**
+ * dma_tasklet - DMA IRQ tasklet
+ * @data: tasklet argument (bam controller structure)
+ *
+ * Sets up next DMA operation and then processes all completed transactions
+ */
+static void dma_tasklet(unsigned long data)
+{
+ struct bam_device *bdev = (struct bam_device *)data;
+ struct bam_chan *bchan;
+ unsigned long flags;
+ unsigned int i;
+
+ /* go through the channels and kick off transactions */
+ for (i = 0; i < bdev->num_channels; i++) {
+ bchan = &bdev->channels[i];
+ spin_lock_irqsave(&bchan->vc.lock, flags);
+
+ if (!list_empty(&bchan->vc.desc_issued) && !bchan->curr_txd)
+ bam_start_dma(bchan);
+ spin_unlock_irqrestore(&bchan->vc.lock, flags);
+ }
+}
+
+/**
+ * bam_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Calls tasklet directly which in turn starts any pending transactions
+ */
+static void bam_issue_pending(struct dma_chan *chan)
+{
+ struct bam_chan *bchan = to_bam_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&bchan->vc.lock, flags);
+
+ /* if work pending and idle, start a transaction */
+ if (vchan_issue_pending(&bchan->vc) && !bchan->curr_txd)
+ bam_start_dma(bchan);
+
+ spin_unlock_irqrestore(&bchan->vc.lock, flags);
+}
+
+/**
+ * bam_dma_free_desc - free descriptor memory
+ * @vd: virtual descriptor
+ *
+ */
+static void bam_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct bam_async_desc *async_desc = container_of(vd,
+ struct bam_async_desc, vd);
+
+ kfree(async_desc);
+}
+
+static struct dma_chan *bam_dma_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *of)
+{
+ struct bam_device *bdev = container_of(of->of_dma_data,
+ struct bam_device, common);
+ unsigned int request;
+
+ if (dma_spec->args_count != 1)
+ return NULL;
+
+ request = dma_spec->args[0];
+ if (request >= bdev->num_channels)
+ return NULL;
+
+ return dma_get_slave_channel(&(bdev->channels[request].vc.chan));
+}
+
+/**
+ * bam_init
+ * @bdev: bam device
+ *
+ * Initialization helper for global bam registers
+ */
+static int bam_init(struct bam_device *bdev)
+{
+ u32 val;
+
+ /* read revision and configuration information */
+ val = readl_relaxed(bdev->regs + BAM_REVISION) >> NUM_EES_SHIFT;
+ val &= NUM_EES_MASK;
+
+ /* check that configured EE is within range */
+ if (bdev->ee >= val)
+ return -EINVAL;
+
+ val = readl_relaxed(bdev->regs + BAM_NUM_PIPES);
+ bdev->num_channels = val & BAM_NUM_PIPES_MASK;
+
+ /* s/w reset bam */
+ /* after reset all pipes are disabled and idle */
+ val = readl_relaxed(bdev->regs + BAM_CTRL);
+ val |= BAM_SW_RST;
+ writel_relaxed(val, bdev->regs + BAM_CTRL);
+ val &= ~BAM_SW_RST;
+ writel_relaxed(val, bdev->regs + BAM_CTRL);
+
+ /* make sure previous stores are visible before enabling BAM */
+ wmb();
+
+ /* enable bam */
+ val |= BAM_EN;
+ writel_relaxed(val, bdev->regs + BAM_CTRL);
+
+ /* set descriptor threshhold, start with 4 bytes */
+ writel_relaxed(DEFAULT_CNT_THRSHLD, bdev->regs + BAM_DESC_CNT_TRSHLD);
+
+ /* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */
+ writel_relaxed(BAM_CNFG_BITS_DEFAULT, bdev->regs + BAM_CNFG_BITS);
+
+ /* enable irqs for errors */
+ writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN,
+ bdev->regs + BAM_IRQ_EN);
+
+ /* unmask global bam interrupt */
+ writel_relaxed(BAM_IRQ_MSK, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
+
+ return 0;
+}
+
+static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan,
+ u32 index)
+{
+ bchan->id = index;
+ bchan->bdev = bdev;
+
+ vchan_init(&bchan->vc, &bdev->common);
+ bchan->vc.desc_free = bam_dma_free_desc;
+}
+
+static int bam_dma_probe(struct platform_device *pdev)
+{
+ struct bam_device *bdev;
+ struct resource *iores;
+ int ret, i;
+
+ bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL);
+ if (!bdev)
+ return -ENOMEM;
+
+ bdev->dev = &pdev->dev;
+
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ bdev->regs = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(bdev->regs))
+ return PTR_ERR(bdev->regs);
+
+ bdev->irq = platform_get_irq(pdev, 0);
+ if (bdev->irq < 0)
+ return bdev->irq;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &bdev->ee);
+ if (ret) {
+ dev_err(bdev->dev, "Execution environment unspecified\n");
+ return ret;
+ }
+
+ bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk");
+ if (IS_ERR(bdev->bamclk))
+ return PTR_ERR(bdev->bamclk);
+
+ ret = clk_prepare_enable(bdev->bamclk);
+ if (ret) {
+ dev_err(bdev->dev, "failed to prepare/enable clock\n");
+ return ret;
+ }
+
+ ret = bam_init(bdev);
+ if (ret)
+ goto err_disable_clk;
+
+ tasklet_init(&bdev->task, dma_tasklet, (unsigned long)bdev);
+
+ bdev->channels = devm_kcalloc(bdev->dev, bdev->num_channels,
+ sizeof(*bdev->channels), GFP_KERNEL);
+
+ if (!bdev->channels) {
+ ret = -ENOMEM;
+ goto err_disable_clk;
+ }
+
+ /* allocate and initialize channels */
+ INIT_LIST_HEAD(&bdev->common.channels);
+
+ for (i = 0; i < bdev->num_channels; i++)
+ bam_channel_init(bdev, &bdev->channels[i], i);
+
+ ret = devm_request_irq(bdev->dev, bdev->irq, bam_dma_irq,
+ IRQF_TRIGGER_HIGH, "bam_dma", bdev);
+ if (ret)
+ goto err_disable_clk;
+
+ /* set max dma segment size */
+ bdev->common.dev = bdev->dev;
+ bdev->common.dev->dma_parms = &bdev->dma_parms;
+ ret = dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE);
+ if (ret) {
+ dev_err(bdev->dev, "cannot set maximum segment size\n");
+ goto err_disable_clk;
+ }
+
+ platform_set_drvdata(pdev, bdev);
+
+ /* set capabilities */
+ dma_cap_zero(bdev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, bdev->common.cap_mask);
+
+ /* initialize dmaengine apis */
+ bdev->common.device_alloc_chan_resources = bam_alloc_chan;
+ bdev->common.device_free_chan_resources = bam_free_chan;
+ bdev->common.device_prep_slave_sg = bam_prep_slave_sg;
+ bdev->common.device_control = bam_control;
+ bdev->common.device_issue_pending = bam_issue_pending;
+ bdev->common.device_tx_status = bam_tx_status;
+ bdev->common.dev = bdev->dev;
+
+ ret = dma_async_device_register(&bdev->common);
+ if (ret) {
+ dev_err(bdev->dev, "failed to register dma async device\n");
+ goto err_disable_clk;
+ }
+
+ ret = of_dma_controller_register(pdev->dev.of_node, bam_dma_xlate,
+ &bdev->common);
+ if (ret)
+ goto err_unregister_dma;
+
+ return 0;
+
+err_unregister_dma:
+ dma_async_device_unregister(&bdev->common);
+err_disable_clk:
+ clk_disable_unprepare(bdev->bamclk);
+ return ret;
+}
+
+static int bam_dma_remove(struct platform_device *pdev)
+{
+ struct bam_device *bdev = platform_get_drvdata(pdev);
+ u32 i;
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&bdev->common);
+
+ /* mask all interrupts for this execution environment */
+ writel_relaxed(0, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
+
+ devm_free_irq(bdev->dev, bdev->irq, bdev);
+
+ for (i = 0; i < bdev->num_channels; i++) {
+ bam_dma_terminate_all(&bdev->channels[i]);
+ tasklet_kill(&bdev->channels[i].vc.task);
+
+ dma_free_writecombine(bdev->dev, BAM_DESC_FIFO_SIZE,
+ bdev->channels[i].fifo_virt,
+ bdev->channels[i].fifo_phys);
+ }
+
+ tasklet_kill(&bdev->task);
+
+ clk_disable_unprepare(bdev->bamclk);
+
+ return 0;
+}
+
+static const struct of_device_id bam_of_match[] = {
+ { .compatible = "qcom,bam-v1.4.0", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bam_of_match);
+
+static struct platform_driver bam_dma_driver = {
+ .probe = bam_dma_probe,
+ .remove = bam_dma_remove,
+ .driver = {
+ .name = "bam-dma-engine",
+ .owner = THIS_MODULE,
+ .of_match_table = bam_of_match,
+ },
+};
+
+module_platform_driver(bam_dma_driver);
+
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM BAM DMA engine driver");
+MODULE_LICENSE("GPL v2");
unsigned int id;
bool valid;
void __iomem *base;
- unsigned int irq;
+ int irq;
struct clk *clk;
spinlock_t lock;
struct s3c24xx_dma_chan *serving;
help
Enable support for the Renesas R-Car series DMA controllers.
+config RCAR_AUDMAC_PP
+ tristate "Renesas R-Car Audio DMAC Peripheral Peripheral support"
+ depends on SH_DMAE_BASE
+ help
+ Enable support for the Renesas R-Car Audio DMAC Peripheral Peripheral controllers.
+
config SHDMA_R8A73A4
def_bool y
depends on ARCH_R8A73A4 && SH_DMAE != n
shdma-objs := $(shdma-y)
obj-$(CONFIG_SUDMAC) += sudmac.o
obj-$(CONFIG_RCAR_HPB_DMAE) += rcar-hpbdma.o
+obj-$(CONFIG_RCAR_AUDMAC_PP) += rcar-audmapp.o
--- /dev/null
+/*
+ * This is for Renesas R-Car Audio-DMAC-peri-peri.
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on the drivers/dma/sh/shdma.c
+ *
+ * Copyright (C) 2011-2012 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/platform_data/dma-rcar-audmapp.h>
+#include <linux/platform_device.h>
+#include <linux/shdma-base.h>
+
+/*
+ * DMA register
+ */
+#define PDMASAR 0x00
+#define PDMADAR 0x04
+#define PDMACHCR 0x0c
+
+/* PDMACHCR */
+#define PDMACHCR_DE (1 << 0)
+
+#define AUDMAPP_MAX_CHANNELS 29
+
+/* Default MEMCPY transfer size = 2^2 = 4 bytes */
+#define LOG2_DEFAULT_XFER_SIZE 2
+#define AUDMAPP_SLAVE_NUMBER 256
+#define AUDMAPP_LEN_MAX (16 * 1024 * 1024)
+
+struct audmapp_chan {
+ struct shdma_chan shdma_chan;
+ struct audmapp_slave_config *config;
+ void __iomem *base;
+};
+
+struct audmapp_device {
+ struct shdma_dev shdma_dev;
+ struct audmapp_pdata *pdata;
+ struct device *dev;
+ void __iomem *chan_reg;
+};
+
+#define to_chan(chan) container_of(chan, struct audmapp_chan, shdma_chan)
+#define to_dev(chan) container_of(chan->shdma_chan.dma_chan.device, \
+ struct audmapp_device, shdma_dev.dma_dev)
+
+static void audmapp_write(struct audmapp_chan *auchan, u32 data, u32 reg)
+{
+ struct audmapp_device *audev = to_dev(auchan);
+ struct device *dev = audev->dev;
+
+ dev_dbg(dev, "w %p : %08x\n", auchan->base + reg, data);
+
+ iowrite32(data, auchan->base + reg);
+}
+
+static u32 audmapp_read(struct audmapp_chan *auchan, u32 reg)
+{
+ return ioread32(auchan->base + reg);
+}
+
+static void audmapp_halt(struct shdma_chan *schan)
+{
+ struct audmapp_chan *auchan = to_chan(schan);
+ int i;
+
+ audmapp_write(auchan, 0, PDMACHCR);
+
+ for (i = 0; i < 1024; i++) {
+ if (0 == audmapp_read(auchan, PDMACHCR))
+ return;
+ udelay(1);
+ }
+}
+
+static void audmapp_start_xfer(struct shdma_chan *schan,
+ struct shdma_desc *sdecs)
+{
+ struct audmapp_chan *auchan = to_chan(schan);
+ struct audmapp_device *audev = to_dev(auchan);
+ struct audmapp_slave_config *cfg = auchan->config;
+ struct device *dev = audev->dev;
+ u32 chcr = cfg->chcr | PDMACHCR_DE;
+
+ dev_dbg(dev, "src/dst/chcr = %pad/%pad/%x\n",
+ &cfg->src, &cfg->dst, cfg->chcr);
+
+ audmapp_write(auchan, cfg->src, PDMASAR);
+ audmapp_write(auchan, cfg->dst, PDMADAR);
+ audmapp_write(auchan, chcr, PDMACHCR);
+}
+
+static struct audmapp_slave_config *
+audmapp_find_slave(struct audmapp_chan *auchan, int slave_id)
+{
+ struct audmapp_device *audev = to_dev(auchan);
+ struct audmapp_pdata *pdata = audev->pdata;
+ struct audmapp_slave_config *cfg;
+ int i;
+
+ if (slave_id >= AUDMAPP_SLAVE_NUMBER)
+ return NULL;
+
+ for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
+ if (cfg->slave_id == slave_id)
+ return cfg;
+
+ return NULL;
+}
+
+static int audmapp_set_slave(struct shdma_chan *schan, int slave_id,
+ dma_addr_t slave_addr, bool try)
+{
+ struct audmapp_chan *auchan = to_chan(schan);
+ struct audmapp_slave_config *cfg =
+ audmapp_find_slave(auchan, slave_id);
+
+ if (!cfg)
+ return -ENODEV;
+ if (try)
+ return 0;
+
+ auchan->config = cfg;
+
+ return 0;
+}
+
+static int audmapp_desc_setup(struct shdma_chan *schan,
+ struct shdma_desc *sdecs,
+ dma_addr_t src, dma_addr_t dst, size_t *len)
+{
+ struct audmapp_chan *auchan = to_chan(schan);
+ struct audmapp_slave_config *cfg = auchan->config;
+
+ if (!cfg)
+ return -ENODEV;
+
+ if (*len > (size_t)AUDMAPP_LEN_MAX)
+ *len = (size_t)AUDMAPP_LEN_MAX;
+
+ return 0;
+}
+
+static void audmapp_setup_xfer(struct shdma_chan *schan,
+ int slave_id)
+{
+}
+
+static dma_addr_t audmapp_slave_addr(struct shdma_chan *schan)
+{
+ return 0; /* always fixed address */
+}
+
+static bool audmapp_channel_busy(struct shdma_chan *schan)
+{
+ struct audmapp_chan *auchan = to_chan(schan);
+ u32 chcr = audmapp_read(auchan, PDMACHCR);
+
+ return chcr & ~PDMACHCR_DE;
+}
+
+static bool audmapp_desc_completed(struct shdma_chan *schan,
+ struct shdma_desc *sdesc)
+{
+ return true;
+}
+
+static struct shdma_desc *audmapp_embedded_desc(void *buf, int i)
+{
+ return &((struct shdma_desc *)buf)[i];
+}
+
+static const struct shdma_ops audmapp_shdma_ops = {
+ .halt_channel = audmapp_halt,
+ .desc_setup = audmapp_desc_setup,
+ .set_slave = audmapp_set_slave,
+ .start_xfer = audmapp_start_xfer,
+ .embedded_desc = audmapp_embedded_desc,
+ .setup_xfer = audmapp_setup_xfer,
+ .slave_addr = audmapp_slave_addr,
+ .channel_busy = audmapp_channel_busy,
+ .desc_completed = audmapp_desc_completed,
+};
+
+static int audmapp_chan_probe(struct platform_device *pdev,
+ struct audmapp_device *audev, int id)
+{
+ struct shdma_dev *sdev = &audev->shdma_dev;
+ struct audmapp_chan *auchan;
+ struct shdma_chan *schan;
+ struct device *dev = audev->dev;
+
+ auchan = devm_kzalloc(dev, sizeof(*auchan), GFP_KERNEL);
+ if (!auchan)
+ return -ENOMEM;
+
+ schan = &auchan->shdma_chan;
+ schan->max_xfer_len = AUDMAPP_LEN_MAX;
+
+ shdma_chan_probe(sdev, schan, id);
+
+ auchan->base = audev->chan_reg + 0x20 + (0x10 * id);
+ dev_dbg(dev, "%02d : %p / %p", id, auchan->base, audev->chan_reg);
+
+ return 0;
+}
+
+static void audmapp_chan_remove(struct audmapp_device *audev)
+{
+ struct dma_device *dma_dev = &audev->shdma_dev.dma_dev;
+ struct shdma_chan *schan;
+ int i;
+
+ shdma_for_each_chan(schan, &audev->shdma_dev, i) {
+ BUG_ON(!schan);
+ shdma_chan_remove(schan);
+ }
+ dma_dev->chancnt = 0;
+}
+
+static int audmapp_probe(struct platform_device *pdev)
+{
+ struct audmapp_pdata *pdata = pdev->dev.platform_data;
+ struct audmapp_device *audev;
+ struct shdma_dev *sdev;
+ struct dma_device *dma_dev;
+ struct resource *res;
+ int err, i;
+
+ if (!pdata)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ audev = devm_kzalloc(&pdev->dev, sizeof(*audev), GFP_KERNEL);
+ if (!audev)
+ return -ENOMEM;
+
+ audev->dev = &pdev->dev;
+ audev->pdata = pdata;
+ audev->chan_reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(audev->chan_reg))
+ return PTR_ERR(audev->chan_reg);
+
+ sdev = &audev->shdma_dev;
+ sdev->ops = &audmapp_shdma_ops;
+ sdev->desc_size = sizeof(struct shdma_desc);
+
+ dma_dev = &sdev->dma_dev;
+ dma_dev->copy_align = LOG2_DEFAULT_XFER_SIZE;
+ dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
+
+ err = shdma_init(&pdev->dev, sdev, AUDMAPP_MAX_CHANNELS);
+ if (err < 0)
+ return err;
+
+ platform_set_drvdata(pdev, audev);
+
+ /* Create DMA Channel */
+ for (i = 0; i < AUDMAPP_MAX_CHANNELS; i++) {
+ err = audmapp_chan_probe(pdev, audev, i);
+ if (err)
+ goto chan_probe_err;
+ }
+
+ err = dma_async_device_register(dma_dev);
+ if (err < 0)
+ goto chan_probe_err;
+
+ return err;
+
+chan_probe_err:
+ audmapp_chan_remove(audev);
+ shdma_cleanup(sdev);
+
+ return err;
+}
+
+static int audmapp_remove(struct platform_device *pdev)
+{
+ struct audmapp_device *audev = platform_get_drvdata(pdev);
+ struct dma_device *dma_dev = &audev->shdma_dev.dma_dev;
+
+ dma_async_device_unregister(dma_dev);
+
+ audmapp_chan_remove(audev);
+ shdma_cleanup(&audev->shdma_dev);
+
+ return 0;
+}
+
+static struct platform_driver audmapp_driver = {
+ .probe = audmapp_probe,
+ .remove = audmapp_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rcar-audmapp-engine",
+ },
+};
+module_platform_driver(audmapp_driver);
+
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
+MODULE_DESCRIPTION("Renesas R-Car Audio DMAC peri-peri driver");
+MODULE_LICENSE("GPL");
struct shdma_chan *schan = to_shdma_chan(chan);
struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
const struct shdma_ops *ops = sdev->ops;
- int match = (int)arg;
+ int match = (long)arg;
int ret;
if (match < 0)
}
dev_dbg(schan->dev,
- "chaining (%u/%u)@%x -> %x with %p, cookie %d\n",
- copy_size, *len, *src, *dst, &new->async_tx,
+ "chaining (%zu/%zu)@%pad -> %pad with %p, cookie %d\n",
+ copy_size, *len, src, dst, &new->async_tx,
new->async_tx.cookie);
new->mark = DESC_PREPARED;
goto err_get_desc;
do {
- dev_dbg(schan->dev, "Add SG #%d@%p[%d], dma %llx\n",
- i, sg, len, (unsigned long long)sg_addr);
+ dev_dbg(schan->dev, "Add SG #%d@%p[%zu], dma %pad\n",
+ i, sg, len, &sg_addr);
if (direction == DMA_DEV_TO_MEM)
new = shdma_add_desc(schan, flags,
/* Only slave DMA channels can be allocated via DT */
dma_cap_set(DMA_SLAVE, mask);
- chan = dma_request_channel(mask, shdma_chan_filter, (void *)id);
+ chan = dma_request_channel(mask, shdma_chan_filter,
+ (void *)(uintptr_t)id);
if (chan)
to_shdma_chan(chan)->hw_req = id;
return ret;
}
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARM)
static irqreturn_t sh_dmae_err(int irq, void *data)
{
struct sh_dmae_device *shdev = data;
sh_dmae_reset(shdev);
return IRQ_HANDLED;
}
+#endif
static bool sh_dmae_desc_completed(struct shdma_chan *schan,
struct shdma_desc *sdesc)
#define sh_dmae_resume NULL
#endif
-const struct dev_pm_ops sh_dmae_pm = {
+static const struct dev_pm_ops sh_dmae_pm = {
.suspend = sh_dmae_suspend,
.resume = sh_dmae_resume,
.runtime_suspend = sh_dmae_runtime_suspend,
static int sh_dmae_probe(struct platform_device *pdev)
{
const struct sh_dmae_pdata *pdata;
- unsigned long irqflags = 0,
- chan_flag[SH_DMAE_MAX_CHANNELS] = {};
- int errirq, chan_irq[SH_DMAE_MAX_CHANNELS];
+ unsigned long chan_flag[SH_DMAE_MAX_CHANNELS] = {};
+ int chan_irq[SH_DMAE_MAX_CHANNELS];
+#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARM)
+ unsigned long irqflags = 0;
+ int errirq;
+#endif
int err, i, irq_cnt = 0, irqres = 0, irq_cap = 0;
struct sh_dmae_device *shdev;
struct dma_device *dma_dev;
struct sudmac_chan *sc = to_chan(schan);
struct sudmac_desc *sd = to_desc(sdesc);
- dev_dbg(sc->shdma_chan.dev, "%s: src=%x, dst=%x, len=%d\n",
- __func__, src, dst, *len);
+ dev_dbg(sc->shdma_chan.dev, "%s: src=%pad, dst=%pad, len=%zu\n",
+ __func__, &src, &dst, *len);
if (*len > schan->max_xfer_len)
*len = schan->max_xfer_len;
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
+#include <linux/of_dma.h>
#include <linux/sirfsoc_dma.h>
#include "dmaengine.h"
return 0;
}
+static struct dma_chan *of_dma_sirfsoc_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct sirfsoc_dma *sdma = ofdma->of_dma_data;
+ unsigned int request = dma_spec->args[0];
+
+ if (request > SIRFSOC_DMA_CHANNELS)
+ return NULL;
+
+ return dma_get_slave_channel(&sdma->channels[request].chan);
+}
+
static int sirfsoc_dma_probe(struct platform_device *op)
{
struct device_node *dn = op->dev.of_node;
if (ret)
goto free_irq;
+ /* Device-tree DMA controller registration */
+ ret = of_dma_controller_register(dn, of_dma_sirfsoc_xlate, sdma);
+ if (ret) {
+ dev_err(dev, "failed to register DMA controller\n");
+ goto unreg_dma_dev;
+ }
+
pm_runtime_enable(&op->dev);
dev_info(dev, "initialized SIRFSOC DMAC driver\n");
return 0;
+unreg_dma_dev:
+ dma_async_device_unregister(dma);
free_irq:
free_irq(sdma->irq, sdma);
irq_dispose:
struct device *dev = &op->dev;
struct sirfsoc_dma *sdma = dev_get_drvdata(dev);
+ of_dma_controller_free(op->dev.of_node);
dma_async_device_unregister(&sdma->dma);
free_irq(sdma->irq, sdma);
irq_dispose_mapping(sdma->irq);
else
chunksize = size;
- status = efi_file_read(fh, files[j].handle,
+ status = efi_file_read(files[j].handle,
&chunksize,
(void *)addr);
if (status != EFI_SUCCESS) {
size -= chunksize;
}
- efi_file_close(fh, files[j].handle);
+ efi_file_close(files[j].handle);
}
}
close_handles:
for (k = j; k < i; k++)
- efi_file_close(fh, files[k].handle);
+ efi_file_close(files[k].handle);
free_files:
efi_call_early(free_pool, files);
fail:
This driver can also be built as a module. If so, the module
will be called ibmpex.
-config SENSORS_IBMPOWERNV
- tristate "IBM PowerNv Platform temperature/power/fan sensor"
- depends on PPC_POWERNV
- default y
- help
- If you say yes here you get support for the temperature/fan/power
- sensors on your platform.
-
config SENSORS_IIO_HWMON
tristate "Hwmon driver that uses channels specified via iio maps"
depends on IIO
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
-obj-$(CONFIG_SENSORS_IBMPOWERNV)+= ibmpowernv.o
obj-$(CONFIG_SENSORS_IIO_HWMON) += iio_hwmon.o
obj-$(CONFIG_SENSORS_INA209) += ina209.o
obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o
+++ /dev/null
-/*
- * hwmon driver for temperature/power/fan on IBM PowerNV platform
- * Copyright (C) 2013 IBM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-
-#include <linux/jiffies.h>
-#include <linux/platform_device.h>
-#include <asm/opal.h>
-#include <linux/err.h>
-
-MODULE_DESCRIPTION("IBM PowerNV Platform power/temp/fan sensor hwmon module");
-MODULE_LICENSE("GPL");
-
-#define MAX_ATTR_LENGTH 32
-
-/* Device tree sensor name prefixes. The device tree has the names in the
- * format "cooling-fan#2-faulted" where the "cooling-fan" is the sensor type,
- * 2 is the sensor count, and "faulted" is the sensor data attribute type.
- */
-#define DT_FAULT_ATTR_SUFFIX "faulted"
-#define DT_DATA_ATTR_SUFFIX "data"
-#define DT_THRESHOLD_ATTR_SUFFIX "thrs"
-
-enum sensors {
- FAN,
- TEMPERATURE,
- POWERSUPPLY,
- POWER,
- MAX_SENSOR_TYPE,
-};
-
-enum attributes {
- INPUT,
- MINIMUM,
- MAXIMUM,
- FAULT,
- MAX_ATTR_TYPES
-};
-
-static struct sensor_name {
- char *name;
- char *compaible;
-} sensor_names[] = {
- {"fan-sensor", "ibm,opal-sensor-cooling-fan"},
- {"amb-temp-sensor", "ibm,opal-sensor-amb-temp"},
- {"power-sensor", "ibm,opal-sensor-power-supply"},
- {"power", "ibm,opal-sensor-power"}
-};
-
-static const char * const attribute_type_table[] = {
- "input",
- "min",
- "max",
- "fault",
- NULL
-};
-
-struct pdev_entry {
- struct list_head list;
- struct platform_device *pdev;
- enum sensors type;
-};
-
-static LIST_HEAD(pdev_list);
-
-/* The sensors are categorised on type.
- *
- * The sensors of same type are categorised under a common platform device.
- * So, The pdev is shared by all sensors of same type.
- * Ex : temp1_input, temp1_max, temp2_input,temp2_max all share same platform
- * device.
- *
- * "sensor_data" is the Platform device specific data.
- * There is one hwmon_device instance for all the sensors of same type.
- * This also holds the list of all sensors with same type but different
- * attribute and index.
- */
-struct sensor_specific_data {
- u32 sensor_id; /* The hex value as in the device tree */
- u32 sensor_index; /* The sensor instance index */
- struct sensor_device_attribute sd_attr;
- enum attributes attr_type;
- char attr_name[64];
-};
-
-struct sensor_data {
- struct device *hwmon_dev;
- struct list_head sensor_list;
- struct device_attribute name_attr;
-};
-
-struct sensor_entry {
- struct list_head list;
- struct sensor_specific_data *sensor_data;
-};
-
-static struct platform_device *powernv_sensor_get_pdev(enum sensors type)
-{
- struct pdev_entry *p;
- list_for_each_entry(p, &pdev_list, list)
- if (p->type == type)
- return p->pdev;
-
- return NULL;
-}
-
-static struct sensor_specific_data *powernv_sensor_get_sensor_data(
- struct sensor_data *pdata,
- int index, enum attributes attr_type)
-{
- struct sensor_entry *p;
- list_for_each_entry(p, &pdata->sensor_list, list)
- if ((p->sensor_data->sensor_index == index) &&
- (attr_type == p->sensor_data->attr_type))
- return p->sensor_data;
-
- return NULL;
-}
-
-static ssize_t show_name(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- struct platform_device *pdev = to_platform_device(dev);
-
- return sprintf(buf, "%s\n", pdev->name);
-}
-
-/* Note: Data from the sensors for each sensor type needs to be converted to
- * the dimension appropriate.
- */
-static ssize_t show_sensor(struct device *dev,
- struct device_attribute *devattr, char *buf)
-{
- struct sensor_device_attribute *sd_attr = to_sensor_dev_attr(devattr);
- struct platform_device *pdev = to_platform_device(dev);
- struct sensor_data *pdata = platform_get_drvdata(pdev);
- struct sensor_specific_data *tdata = NULL;
- enum sensors sensor_type = pdev->id;
- u32 x = -1;
- int ret;
-
- if (sd_attr && sd_attr->dev_attr.attr.name) {
- char *pos = strchr(sd_attr->dev_attr.attr.name, '_');
- int i;
-
- for (i = 0; i < MAX_ATTR_TYPES; i++) {
- if (strcmp(pos+1, attribute_type_table[i]) == 0) {
- tdata = powernv_sensor_get_sensor_data(pdata,
- sd_attr->index, i);
- break;
- }
- }
- }
-
- if (tdata) {
- ret = opal_get_sensor_data(tdata->sensor_id, &x);
- if (ret)
- x = -1;
- }
-
- if (sensor_type == TEMPERATURE && x > 0) {
- /* Temperature comes in Degrees and convert it to
- * milli-degrees.
- */
- x = x*1000;
- } else if (sensor_type == POWER && x > 0) {
- /* Power value comes in watts, convert to micro-watts */
- x = x * 1000000;
- }
-
- return sprintf(buf, "%d\n", x);
-}
-
-static u32 get_sensor_index_from_name(const char *name)
-{
- char *hash_position = strchr(name, '#');
- u32 index = 0, copy_length;
- char newbuf[8];
-
- if (hash_position) {
- copy_length = strchr(hash_position, '-') - hash_position - 1;
- if (copy_length < sizeof(newbuf)) {
- strncpy(newbuf, hash_position + 1, copy_length);
- sscanf(newbuf, "%d", &index);
- }
- }
-
- return index;
-}
-
-static inline void get_sensor_suffix_from_name(const char *name, char *suffix)
-{
- char *dash_position = strrchr(name, '-');
- if (dash_position)
- strncpy(suffix, dash_position+1, MAX_ATTR_LENGTH);
- else
- strcpy(suffix,"");
-}
-
-static int get_sensor_attr_properties(const char *sensor_name,
- enum sensors sensor_type, enum attributes *attr_type,
- u32 *sensor_index)
-{
- char suffix[MAX_ATTR_LENGTH];
-
- *attr_type = MAX_ATTR_TYPES;
- *sensor_index = get_sensor_index_from_name(sensor_name);
- if (*sensor_index == 0)
- return -EINVAL;
-
- get_sensor_suffix_from_name(sensor_name, suffix);
- if (strcmp(suffix, "") == 0)
- return -EINVAL;
-
- if (strcmp(suffix, DT_FAULT_ATTR_SUFFIX) == 0)
- *attr_type = FAULT;
- else if (strcmp(suffix, DT_DATA_ATTR_SUFFIX) == 0)
- *attr_type = INPUT;
- else if ((sensor_type == TEMPERATURE) &&
- (strcmp(suffix, DT_THRESHOLD_ATTR_SUFFIX) == 0))
- *attr_type = MAXIMUM;
- else if ((sensor_type == FAN) &&
- (strcmp(suffix, DT_THRESHOLD_ATTR_SUFFIX) == 0))
- *attr_type = MINIMUM;
- else
- return -ENOENT;
-
- if (((sensor_type == FAN) && ((*attr_type == INPUT) ||
- (*attr_type == MINIMUM)))
- || ((sensor_type == TEMPERATURE) && ((*attr_type == INPUT) ||
- (*attr_type == MAXIMUM)))
- || ((sensor_type == POWER) && ((*attr_type == INPUT))))
- return 0;
-
- return -ENOENT;
-}
-
-static int create_sensor_attr(struct sensor_specific_data *tdata,
- struct device *dev, enum sensors sensor_type,
- enum attributes attr_type)
-{
- int err = 0;
- char temp_file_prefix[50];
- static const char *const file_name_format = "%s%d_%s";
-
- tdata->attr_type = attr_type;
-
- if (sensor_type == FAN)
- strcpy(temp_file_prefix, "fan");
- else if (sensor_type == TEMPERATURE)
- strcpy(temp_file_prefix, "temp");
- else if (sensor_type == POWERSUPPLY)
- strcpy(temp_file_prefix, "powersupply");
- else if (sensor_type == POWER)
- strcpy(temp_file_prefix, "power");
-
- snprintf(tdata->attr_name, sizeof(tdata->attr_name), file_name_format,
- temp_file_prefix, tdata->sensor_index,
- attribute_type_table[tdata->attr_type]);
-
- sysfs_attr_init(&tdata->sd_attr.dev_attr.attr);
- tdata->sd_attr.dev_attr.attr.name = tdata->attr_name;
- tdata->sd_attr.dev_attr.attr.mode = S_IRUGO;
- tdata->sd_attr.dev_attr.show = show_sensor;
-
- tdata->sd_attr.index = tdata->sensor_index;
- err = device_create_file(dev, &tdata->sd_attr.dev_attr);
-
- return err;
-}
-
-static int create_name_attr(struct sensor_data *pdata,
- struct device *dev)
-{
- sysfs_attr_init(&pdata->name_attr.attr);
- pdata->name_attr.attr.name = "name";
- pdata->name_attr.attr.mode = S_IRUGO;
- pdata->name_attr.show = show_name;
- return device_create_file(dev, &pdata->name_attr);
-}
-
-static int create_platform_device(enum sensors sensor_type,
- struct platform_device **pdev)
-{
- struct pdev_entry *pdev_entry = NULL;
- int err;
-
- *pdev = platform_device_alloc(sensor_names[sensor_type].name,
- sensor_type);
- if (!*pdev) {
- pr_err("Device allocation failed\n");
- err = -ENOMEM;
- goto exit;
- }
-
- pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL);
- if (!pdev_entry) {
- pr_err("Device allocation failed\n");
- err = -ENOMEM;
- goto exit_device_put;
- }
-
- err = platform_device_add(*pdev);
- if (err) {
- pr_err("Device addition failed (%d)\n", err);
- goto exit_device_free;
- }
-
- pdev_entry->pdev = *pdev;
- pdev_entry->type = (*pdev)->id;
-
- list_add_tail(&pdev_entry->list, &pdev_list);
-
- return 0;
-exit_device_free:
- kfree(pdev_entry);
-exit_device_put:
- platform_device_put(*pdev);
-exit:
- return err;
-}
-
-static int create_sensor_data(struct platform_device *pdev)
-{
- struct sensor_data *pdata = NULL;
- int err = 0;
-
- pdata = kzalloc(sizeof(struct sensor_data), GFP_KERNEL);
- if (!pdata) {
- err = -ENOMEM;
- goto exit;
- }
-
- err = create_name_attr(pdata, &pdev->dev);
- if (err)
- goto exit_free;
-
- pdata->hwmon_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(pdata->hwmon_dev)) {
- err = PTR_ERR(pdata->hwmon_dev);
- dev_err(&pdev->dev, "Class registration failed (%d)\n",
- err);
- goto exit_name;
- }
-
- INIT_LIST_HEAD(&pdata->sensor_list);
- platform_set_drvdata(pdev, pdata);
-
- return 0;
-
-exit_name:
- device_remove_file(&pdev->dev, &pdata->name_attr);
-exit_free:
- kfree(pdata);
-exit:
- return err;
-}
-
-static void delete_sensor_attr(struct sensor_data *pdata)
-{
- struct sensor_entry *s, *l;
-
- list_for_each_entry_safe(s, l, &pdata->sensor_list, list) {
- struct sensor_specific_data *tdata = s->sensor_data;
- kfree(tdata);
- list_del(&s->list);
- kfree(s);
- }
-}
-
-static int powernv_sensor_init(u32 sensor_id, const struct device_node *np,
- enum sensors sensor_type, enum attributes attr_type,
- u32 sensor_index)
-{
- struct platform_device *pdev = powernv_sensor_get_pdev(sensor_type);
- struct sensor_specific_data *tdata;
- struct sensor_entry *sensor_entry;
- struct sensor_data *pdata;
- int err = 0;
-
- if (!pdev) {
- err = create_platform_device(sensor_type, &pdev);
- if (err)
- goto exit;
-
- err = create_sensor_data(pdev);
- if (err)
- goto exit;
- }
-
- pdata = platform_get_drvdata(pdev);
- if (!pdata) {
- err = -ENOMEM;
- goto exit;
- }
-
- tdata = kzalloc(sizeof(struct sensor_specific_data), GFP_KERNEL);
- if (!tdata) {
- err = -ENOMEM;
- goto exit;
- }
-
- tdata->sensor_id = sensor_id;
- tdata->sensor_index = sensor_index;
-
- err = create_sensor_attr(tdata, &pdev->dev, sensor_type, attr_type);
- if (err)
- goto exit_free;
-
- sensor_entry = kzalloc(sizeof(struct sensor_entry), GFP_KERNEL);
- if (!sensor_entry) {
- err = -ENOMEM;
- goto exit_attr;
- }
-
- sensor_entry->sensor_data = tdata;
-
- list_add_tail(&sensor_entry->list, &pdata->sensor_list);
-
- return 0;
-exit_attr:
- device_remove_file(&pdev->dev, &tdata->sd_attr.dev_attr);
-exit_free:
- kfree(tdata);
-exit:
- return err;
-}
-
-static void delete_unregister_sensors(void)
-{
- struct pdev_entry *p, *n;
-
- list_for_each_entry_safe(p, n, &pdev_list, list) {
- struct sensor_data *pdata = platform_get_drvdata(p->pdev);
- if (pdata) {
- delete_sensor_attr(pdata);
-
- hwmon_device_unregister(pdata->hwmon_dev);
- kfree(pdata);
- }
- platform_device_unregister(p->pdev);
- list_del(&p->list);
- kfree(p);
- }
-}
-
-static int __init powernv_hwmon_init(void)
-{
- struct device_node *opal, *np = NULL;
- enum attributes attr_type;
- enum sensors type;
- const u32 *sensor_id;
- u32 sensor_index;
- int err;
-
- opal = of_find_node_by_path("/ibm,opal/sensors");
- if (!opal) {
- pr_err("%s: Opal 'sensors' node not found\n", __func__);
- return -ENXIO;
- }
-
- for_each_child_of_node(opal, np) {
- if (np->name == NULL)
- continue;
-
- for (type = 0; type < MAX_SENSOR_TYPE; type++)
- if (of_device_is_compatible(np,
- sensor_names[type].compaible))
- break;
-
- if (type == MAX_SENSOR_TYPE)
- continue;
-
- if (get_sensor_attr_properties(np->name, type, &attr_type,
- &sensor_index))
- continue;
-
- sensor_id = of_get_property(np, "sensor-id", NULL);
- if (!sensor_id) {
- pr_info("%s: %s doesn't have sensor-id\n", __func__,
- np->name);
- continue;
- }
-
- err = powernv_sensor_init(*sensor_id, np, type, attr_type,
- sensor_index);
- if (err) {
- of_node_put(opal);
- goto exit;
- }
- }
- of_node_put(opal);
-
- return 0;
-exit:
- delete_unregister_sensors();
- return err;
-
-}
-
-static void powernv_hwmon_exit(void)
-{
- delete_unregister_sensors();
-}
-
-module_init(powernv_hwmon_init);
-module_exit(powernv_hwmon_exit);
Wellsburg (PCH)
Coleto Creek (PCH)
Wildcat Point-LP (PCH)
+ BayTrail (SOC)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
help
The unit of the TWI clock is kHz.
+config I2C_CADENCE
+ tristate "Cadence I2C Controller"
+ depends on ARCH_ZYNQ
+ help
+ Say yes here to select Cadence I2C Host Controller. This controller is
+ e.g. used by Xilinx Zynq.
+
config I2C_CBUS_GPIO
tristate "CBUS I2C driver"
depends on GPIOLIB
This driver can also be built as a module. If so, the module
will be called i2c-designware-pci.
+config I2C_EFM32
+ tristate "EFM32 I2C controller"
+ depends on ARCH_EFM32 || COMPILE_TEST
+ help
+ This driver supports the i2c block found in Energy Micro's EFM32
+ SoCs.
+
config I2C_EG20T
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
depends on PCI
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
+ depends on MV64X60 || PLAT_ORION || ARCH_SUNXI
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
is necessary for systems where the PXA may be a target on the
I2C bus.
+config I2C_QUP
+ tristate "Qualcomm QUP based I2C controller"
+ depends on ARCH_QCOM
+ help
+ If you say yes to this option, support will be included for the
+ built-in I2C interface on the Qualcomm SoCs.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-qup.
+
config I2C_RIIC
tristate "Renesas RIIC adapter"
depends on ARCH_SHMOBILE || COMPILE_TEST
obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
+obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
i2c-designware-platform-objs := i2c-designware-platdrv.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
i2c-designware-pci-objs := i2c-designware-pcidrv.o
+obj-$(CONFIG_I2C_EFM32) += i2c-efm32.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
obj-$(CONFIG_I2C_EXYNOS5) += i2c-exynos5.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
+obj-$(CONFIG_I2C_QUP) += i2c-qup.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
.algo = &smbus_algorithm,
};
-static DEFINE_PCI_DEVICE_TABLE(ali1535_ids) = {
+static const struct pci_device_id ali1535_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
{ },
};
ali1563_shutdown(dev);
}
-static DEFINE_PCI_DEVICE_TABLE(ali1563_id_table) = {
+static const struct pci_device_id ali1563_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
{},
};
.algo = &smbus_algorithm,
};
-static DEFINE_PCI_DEVICE_TABLE(ali15x3_ids) = {
+static const struct pci_device_id ali15x3_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) },
{ 0, }
};
"nVidia nForce", "AMD8111",
};
-static DEFINE_PCI_DEVICE_TABLE(amd756_ids) = {
+static const struct pci_device_id amd756_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B),
.driver_data = AMD756 },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413),
};
-static DEFINE_PCI_DEVICE_TABLE(amd8111_ids) = {
+static const struct pci_device_id amd8111_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) },
{ 0, }
};
#include <linux/slab.h>
#include <linux/platform_data/dma-atmel.h>
-#define TWI_CLK_HZ 100000 /* max 400 Kbits/s */
+#define DEFAULT_TWI_CLK_HZ 100000 /* max 400 Kbits/s */
#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */
#define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */
struct resource *mem;
int rc;
u32 phy_addr;
+ u32 bus_clk_rate;
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
dev->use_dma = true;
}
- at91_calc_twi_clock(dev, TWI_CLK_HZ);
+ rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
+ &bus_clk_rate);
+ if (rc)
+ bus_clk_rate = DEFAULT_TWI_CLK_HZ;
+
+ at91_calc_twi_clock(dev, bus_clk_rate);
at91_init_twi_bus(dev);
snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
i2c_set_adapdata(&dev->adapter, dev);
dev->adapter.owner = THIS_MODULE;
- dev->adapter.class = I2C_CLASS_HWMON;
+ dev->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
dev->adapter.algo = &at91_twi_algorithm;
dev->adapter.dev.parent = dev->dev;
dev->adapter.nr = pdev->id;
static int bcm2835_i2c_probe(struct platform_device *pdev)
{
struct bcm2835_i2c_dev *i2c_dev;
- struct resource *mem, *requested, *irq;
+ struct resource *mem, *irq;
u32 bus_clk_rate, divider;
int ret;
struct i2c_adapter *adap;
init_completion(&i2c_dev->completion);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "No mem resource\n");
- return -ENODEV;
- }
-
- requested = devm_request_mem_region(&pdev->dev, mem->start,
- resource_size(mem),
- dev_name(&pdev->dev));
- if (!requested) {
- dev_err(&pdev->dev, "Could not claim register region\n");
- return -EBUSY;
- }
-
- i2c_dev->regs = devm_ioremap(&pdev->dev, mem->start,
- resource_size(mem));
- if (!i2c_dev->regs) {
- dev_err(&pdev->dev, "Could not map registers\n");
- return -ENOMEM;
- }
+ i2c_dev->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(i2c_dev->regs))
+ return PTR_ERR(i2c_dev->regs);
i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c_dev->clk)) {
adap = &i2c_dev->adapter;
i2c_set_adapdata(adap, i2c_dev);
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
adap->algo = &bcm2835_i2c_algo;
adap->dev.parent = &pdev->dev;
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/i2c/bfin_twi.h>
-#include <asm/blackfin.h>
-#include <asm/portmux.h>
#include <asm/irq.h>
+#include <asm/portmux.h>
#include <asm/bfin_twi.h>
/* SMBus mode*/
/* Transmit next data */
while (iface->writeNum > 0 &&
(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
- SSYNC();
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
}
/* Clear interrupt status */
write_INT_STAT(iface, twi_int_status);
bfin_twi_handle_interrupt(iface, twi_int_status);
- SSYNC();
}
spin_unlock_irqrestore(&iface->lock, flags);
return IRQ_HANDLED;
* discarded before start a new operation.
*/
write_FIFO_CTL(iface, 0x3);
- SSYNC();
write_FIFO_CTL(iface, 0);
- SSYNC();
if (pmsg->flags & I2C_M_RD)
iface->read_write = I2C_SMBUS_READ;
if (iface->writeNum > 0) {
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
- SSYNC();
}
}
/* Interrupt mask . Enable XMT, RCV interrupt */
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
- SSYNC();
if (pmsg->len <= 255)
write_MASTER_CTL(iface, pmsg->len << 6);
(iface->msg_num > 1 ? RSTART : 0) |
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
- SSYNC();
while (!iface->result) {
if (!wait_for_completion_timeout(&iface->complete,
* start a new operation.
*/
write_FIFO_CTL(iface, 0x3);
- SSYNC();
write_FIFO_CTL(iface, 0);
/* clear int stat */
/* Set Transmit device address */
write_MASTER_ADDR(iface, addr);
- SSYNC();
switch (iface->cur_mode) {
case TWI_I2C_MODE_STANDARDSUB:
write_INT_MASK(iface, MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
- SSYNC();
if (iface->writeNum + 1 <= 255)
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
case TWI_I2C_MODE_COMBINED:
write_XMT_DATA8(iface, iface->command);
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
- SSYNC();
if (iface->writeNum > 0)
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
write_INT_MASK(iface, MCOMP | MERR |
((iface->read_write == I2C_SMBUS_READ) ?
RCVSERV : XMTSERV));
- SSYNC();
/* Master enable */
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
break;
}
- SSYNC();
while (!iface->result) {
if (!wait_for_completion_timeout(&iface->complete,
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
p_adap->algo = &bfin_twi_algorithm;
p_adap->algo_data = iface;
- p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
p_adap->dev.parent = &pdev->dev;
p_adap->timeout = 5 * HZ;
p_adap->retries = 3;
/* Enable TWI */
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
- SSYNC();
rc = i2c_add_numbered_adapter(p_adap);
if (rc < 0) {
--- /dev/null
+/*
+ * I2C bus driver for the Cadence I2C controller.
+ *
+ * Copyright (C) 2009 - 2014 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2 of the License, or (at your option) any
+ * later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/* Register offsets for the I2C device. */
+#define CDNS_I2C_CR_OFFSET 0x00 /* Control Register, RW */
+#define CDNS_I2C_SR_OFFSET 0x04 /* Status Register, RO */
+#define CDNS_I2C_ADDR_OFFSET 0x08 /* I2C Address Register, RW */
+#define CDNS_I2C_DATA_OFFSET 0x0C /* I2C Data Register, RW */
+#define CDNS_I2C_ISR_OFFSET 0x10 /* IRQ Status Register, RW */
+#define CDNS_I2C_XFER_SIZE_OFFSET 0x14 /* Transfer Size Register, RW */
+#define CDNS_I2C_TIME_OUT_OFFSET 0x1C /* Time Out Register, RW */
+#define CDNS_I2C_IER_OFFSET 0x24 /* IRQ Enable Register, WO */
+#define CDNS_I2C_IDR_OFFSET 0x28 /* IRQ Disable Register, WO */
+
+/* Control Register Bit mask definitions */
+#define CDNS_I2C_CR_HOLD BIT(4) /* Hold Bus bit */
+#define CDNS_I2C_CR_ACK_EN BIT(3)
+#define CDNS_I2C_CR_NEA BIT(2)
+#define CDNS_I2C_CR_MS BIT(1)
+/* Read or Write Master transfer 0 = Transmitter, 1 = Receiver */
+#define CDNS_I2C_CR_RW BIT(0)
+/* 1 = Auto init FIFO to zeroes */
+#define CDNS_I2C_CR_CLR_FIFO BIT(6)
+#define CDNS_I2C_CR_DIVA_SHIFT 14
+#define CDNS_I2C_CR_DIVA_MASK (3 << CDNS_I2C_CR_DIVA_SHIFT)
+#define CDNS_I2C_CR_DIVB_SHIFT 8
+#define CDNS_I2C_CR_DIVB_MASK (0x3f << CDNS_I2C_CR_DIVB_SHIFT)
+
+/* Status Register Bit mask definitions */
+#define CDNS_I2C_SR_BA BIT(8)
+#define CDNS_I2C_SR_RXDV BIT(5)
+
+/*
+ * I2C Address Register Bit mask definitions
+ * Normal addressing mode uses [6:0] bits. Extended addressing mode uses [9:0]
+ * bits. A write access to this register always initiates a transfer if the I2C
+ * is in master mode.
+ */
+#define CDNS_I2C_ADDR_MASK 0x000003FF /* I2C Address Mask */
+
+/*
+ * I2C Interrupt Registers Bit mask definitions
+ * All the four interrupt registers (Status/Mask/Enable/Disable) have the same
+ * bit definitions.
+ */
+#define CDNS_I2C_IXR_ARB_LOST BIT(9)
+#define CDNS_I2C_IXR_RX_UNF BIT(7)
+#define CDNS_I2C_IXR_TX_OVF BIT(6)
+#define CDNS_I2C_IXR_RX_OVF BIT(5)
+#define CDNS_I2C_IXR_SLV_RDY BIT(4)
+#define CDNS_I2C_IXR_TO BIT(3)
+#define CDNS_I2C_IXR_NACK BIT(2)
+#define CDNS_I2C_IXR_DATA BIT(1)
+#define CDNS_I2C_IXR_COMP BIT(0)
+
+#define CDNS_I2C_IXR_ALL_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
+ CDNS_I2C_IXR_RX_UNF | \
+ CDNS_I2C_IXR_TX_OVF | \
+ CDNS_I2C_IXR_RX_OVF | \
+ CDNS_I2C_IXR_SLV_RDY | \
+ CDNS_I2C_IXR_TO | \
+ CDNS_I2C_IXR_NACK | \
+ CDNS_I2C_IXR_DATA | \
+ CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_IXR_ERR_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
+ CDNS_I2C_IXR_RX_UNF | \
+ CDNS_I2C_IXR_TX_OVF | \
+ CDNS_I2C_IXR_RX_OVF | \
+ CDNS_I2C_IXR_NACK)
+
+#define CDNS_I2C_ENABLED_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
+ CDNS_I2C_IXR_RX_UNF | \
+ CDNS_I2C_IXR_TX_OVF | \
+ CDNS_I2C_IXR_RX_OVF | \
+ CDNS_I2C_IXR_NACK | \
+ CDNS_I2C_IXR_DATA | \
+ CDNS_I2C_IXR_COMP)
+
+#define CDNS_I2C_TIMEOUT msecs_to_jiffies(1000)
+
+#define CDNS_I2C_FIFO_DEPTH 16
+/* FIFO depth at which the DATA interrupt occurs */
+#define CDNS_I2C_DATA_INTR_DEPTH (CDNS_I2C_FIFO_DEPTH - 2)
+#define CDNS_I2C_MAX_TRANSFER_SIZE 255
+/* Transfer size in multiples of data interrupt depth */
+#define CDNS_I2C_TRANSFER_SIZE (CDNS_I2C_MAX_TRANSFER_SIZE - 3)
+
+#define DRIVER_NAME "cdns-i2c"
+
+#define CDNS_I2C_SPEED_MAX 400000
+#define CDNS_I2C_SPEED_DEFAULT 100000
+
+#define CDNS_I2C_DIVA_MAX 4
+#define CDNS_I2C_DIVB_MAX 64
+
+#define cdns_i2c_readreg(offset) readl_relaxed(id->membase + offset)
+#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
+
+/**
+ * struct cdns_i2c - I2C device private data structure
+ * @membase: Base address of the I2C device
+ * @adap: I2C adapter instance
+ * @p_msg: Message pointer
+ * @err_status: Error status in Interrupt Status Register
+ * @xfer_done: Transfer complete status
+ * @p_send_buf: Pointer to transmit buffer
+ * @p_recv_buf: Pointer to receive buffer
+ * @suspended: Flag holding the device's PM status
+ * @send_count: Number of bytes still expected to send
+ * @recv_count: Number of bytes still expected to receive
+ * @irq: IRQ number
+ * @input_clk: Input clock to I2C controller
+ * @i2c_clk: Maximum I2C clock speed
+ * @bus_hold_flag: Flag used in repeated start for clearing HOLD bit
+ * @clk: Pointer to struct clk
+ * @clk_rate_change_nb: Notifier block for clock rate changes
+ */
+struct cdns_i2c {
+ void __iomem *membase;
+ struct i2c_adapter adap;
+ struct i2c_msg *p_msg;
+ int err_status;
+ struct completion xfer_done;
+ unsigned char *p_send_buf;
+ unsigned char *p_recv_buf;
+ u8 suspended;
+ unsigned int send_count;
+ unsigned int recv_count;
+ int irq;
+ unsigned long input_clk;
+ unsigned int i2c_clk;
+ unsigned int bus_hold_flag;
+ struct clk *clk;
+ struct notifier_block clk_rate_change_nb;
+};
+
+#define to_cdns_i2c(_nb) container_of(_nb, struct cdns_i2c, \
+ clk_rate_change_nb)
+
+/**
+ * cdns_i2c_clear_bus_hold() - Clear bus hold bit
+ * @id: Pointer to driver data struct
+ *
+ * Helper to clear the controller's bus hold bit.
+ */
+static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id)
+{
+ u32 reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ if (reg & CDNS_I2C_CR_HOLD)
+ cdns_i2c_writereg(reg & ~CDNS_I2C_CR_HOLD, CDNS_I2C_CR_OFFSET);
+}
+
+/**
+ * cdns_i2c_isr - Interrupt handler for the I2C device
+ * @irq: irq number for the I2C device
+ * @ptr: void pointer to cdns_i2c structure
+ *
+ * This function handles the data interrupt, transfer complete interrupt and
+ * the error interrupts of the I2C device.
+ *
+ * Return: IRQ_HANDLED always
+ */
+static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
+{
+ unsigned int isr_status, avail_bytes;
+ unsigned int bytes_to_recv, bytes_to_send;
+ struct cdns_i2c *id = ptr;
+ /* Signal completion only after everything is updated */
+ int done_flag = 0;
+ irqreturn_t status = IRQ_NONE;
+
+ isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+
+ /* Handling nack and arbitration lost interrupt */
+ if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_ARB_LOST)) {
+ done_flag = 1;
+ status = IRQ_HANDLED;
+ }
+
+ /* Handling Data interrupt */
+ if ((isr_status & CDNS_I2C_IXR_DATA) &&
+ (id->recv_count >= CDNS_I2C_DATA_INTR_DEPTH)) {
+ /* Always read data interrupt threshold bytes */
+ bytes_to_recv = CDNS_I2C_DATA_INTR_DEPTH;
+ id->recv_count -= CDNS_I2C_DATA_INTR_DEPTH;
+ avail_bytes = cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+ /*
+ * if the tranfer size register value is zero, then
+ * check for the remaining bytes and update the
+ * transfer size register.
+ */
+ if (!avail_bytes) {
+ if (id->recv_count > CDNS_I2C_TRANSFER_SIZE)
+ cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ else
+ cdns_i2c_writereg(id->recv_count,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ }
+
+ /* Process the data received */
+ while (bytes_to_recv--)
+ *(id->p_recv_buf)++ =
+ cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+
+ if (!id->bus_hold_flag &&
+ (id->recv_count <= CDNS_I2C_FIFO_DEPTH))
+ cdns_i2c_clear_bus_hold(id);
+
+ status = IRQ_HANDLED;
+ }
+
+ /* Handling Transfer Complete interrupt */
+ if (isr_status & CDNS_I2C_IXR_COMP) {
+ if (!id->p_recv_buf) {
+ /*
+ * If the device is sending data If there is further
+ * data to be sent. Calculate the available space
+ * in FIFO and fill the FIFO with that many bytes.
+ */
+ if (id->send_count) {
+ avail_bytes = CDNS_I2C_FIFO_DEPTH -
+ cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+ if (id->send_count > avail_bytes)
+ bytes_to_send = avail_bytes;
+ else
+ bytes_to_send = id->send_count;
+
+ while (bytes_to_send--) {
+ cdns_i2c_writereg(
+ (*(id->p_send_buf)++),
+ CDNS_I2C_DATA_OFFSET);
+ id->send_count--;
+ }
+ } else {
+ /*
+ * Signal the completion of transaction and
+ * clear the hold bus bit if there are no
+ * further messages to be processed.
+ */
+ done_flag = 1;
+ }
+ if (!id->send_count && !id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
+ } else {
+ if (!id->bus_hold_flag)
+ cdns_i2c_clear_bus_hold(id);
+ /*
+ * If the device is receiving data, then signal
+ * the completion of transaction and read the data
+ * present in the FIFO. Signal the completion of
+ * transaction.
+ */
+ while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
+ CDNS_I2C_SR_RXDV) {
+ *(id->p_recv_buf)++ =
+ cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
+ id->recv_count--;
+ }
+ done_flag = 1;
+ }
+
+ status = IRQ_HANDLED;
+ }
+
+ /* Update the status for errors */
+ id->err_status = isr_status & CDNS_I2C_IXR_ERR_INTR_MASK;
+ if (id->err_status)
+ status = IRQ_HANDLED;
+
+ cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+ if (done_flag)
+ complete(&id->xfer_done);
+
+ return status;
+}
+
+/**
+ * cdns_i2c_mrecv - Prepare and start a master receive operation
+ * @id: pointer to the i2c device structure
+ */
+static void cdns_i2c_mrecv(struct cdns_i2c *id)
+{
+ unsigned int ctrl_reg;
+ unsigned int isr_status;
+
+ id->p_recv_buf = id->p_msg->buf;
+ id->recv_count = id->p_msg->len;
+
+ /* Put the controller in master receive mode and clear the FIFO */
+ ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ ctrl_reg |= CDNS_I2C_CR_RW | CDNS_I2C_CR_CLR_FIFO;
+
+ if (id->p_msg->flags & I2C_M_RECV_LEN)
+ id->recv_count = I2C_SMBUS_BLOCK_MAX + 1;
+
+ /*
+ * Check for the message size against FIFO depth and set the
+ * 'hold bus' bit if it is greater than FIFO depth.
+ */
+ if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
+ ctrl_reg |= CDNS_I2C_CR_HOLD;
+
+ cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+ /* Clear the interrupts in interrupt status register */
+ isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+ /*
+ * The no. of bytes to receive is checked against the limit of
+ * max transfer size. Set transfer size register with no of bytes
+ * receive if it is less than transfer size and transfer size if
+ * it is more. Enable the interrupts.
+ */
+ if (id->recv_count > CDNS_I2C_TRANSFER_SIZE)
+ cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
+ CDNS_I2C_XFER_SIZE_OFFSET);
+ else
+ cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
+ /* Clear the bus hold flag if bytes to receive is less than FIFO size */
+ if (!id->bus_hold_flag &&
+ ((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
+ (id->recv_count <= CDNS_I2C_FIFO_DEPTH))
+ cdns_i2c_clear_bus_hold(id);
+ /* Set the slave address in address register - triggers operation */
+ cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+ CDNS_I2C_ADDR_OFFSET);
+ cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
+}
+
+/**
+ * cdns_i2c_msend - Prepare and start a master send operation
+ * @id: pointer to the i2c device
+ */
+static void cdns_i2c_msend(struct cdns_i2c *id)
+{
+ unsigned int avail_bytes;
+ unsigned int bytes_to_send;
+ unsigned int ctrl_reg;
+ unsigned int isr_status;
+
+ id->p_recv_buf = NULL;
+ id->p_send_buf = id->p_msg->buf;
+ id->send_count = id->p_msg->len;
+
+ /* Set the controller in Master transmit mode and clear the FIFO. */
+ ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ ctrl_reg &= ~CDNS_I2C_CR_RW;
+ ctrl_reg |= CDNS_I2C_CR_CLR_FIFO;
+
+ /*
+ * Check for the message size against FIFO depth and set the
+ * 'hold bus' bit if it is greater than FIFO depth.
+ */
+ if (id->send_count > CDNS_I2C_FIFO_DEPTH)
+ ctrl_reg |= CDNS_I2C_CR_HOLD;
+ cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+ /* Clear the interrupts in interrupt status register. */
+ isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
+
+ /*
+ * Calculate the space available in FIFO. Check the message length
+ * against the space available, and fill the FIFO accordingly.
+ * Enable the interrupts.
+ */
+ avail_bytes = CDNS_I2C_FIFO_DEPTH -
+ cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
+
+ if (id->send_count > avail_bytes)
+ bytes_to_send = avail_bytes;
+ else
+ bytes_to_send = id->send_count;
+
+ while (bytes_to_send--) {
+ cdns_i2c_writereg((*(id->p_send_buf)++), CDNS_I2C_DATA_OFFSET);
+ id->send_count--;
+ }
+
+ /*
+ * Clear the bus hold flag if there is no more data
+ * and if it is the last message.
+ */
+ if (!id->bus_hold_flag && !id->send_count)
+ cdns_i2c_clear_bus_hold(id);
+ /* Set the slave address in address register - triggers operation. */
+ cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+ CDNS_I2C_ADDR_OFFSET);
+
+ cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
+}
+
+/**
+ * cdns_i2c_master_reset - Reset the interface
+ * @adap: pointer to the i2c adapter driver instance
+ *
+ * This function cleanup the fifos, clear the hold bit and status
+ * and disable the interrupts.
+ */
+static void cdns_i2c_master_reset(struct i2c_adapter *adap)
+{
+ struct cdns_i2c *id = adap->algo_data;
+ u32 regval;
+
+ /* Disable the interrupts */
+ cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK, CDNS_I2C_IDR_OFFSET);
+ /* Clear the hold bit and fifos */
+ regval = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ regval &= ~CDNS_I2C_CR_HOLD;
+ regval |= CDNS_I2C_CR_CLR_FIFO;
+ cdns_i2c_writereg(regval, CDNS_I2C_CR_OFFSET);
+ /* Update the transfercount register to zero */
+ cdns_i2c_writereg(0, CDNS_I2C_XFER_SIZE_OFFSET);
+ /* Clear the interupt status register */
+ regval = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
+ cdns_i2c_writereg(regval, CDNS_I2C_ISR_OFFSET);
+ /* Clear the status register */
+ regval = cdns_i2c_readreg(CDNS_I2C_SR_OFFSET);
+ cdns_i2c_writereg(regval, CDNS_I2C_SR_OFFSET);
+}
+
+static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
+ struct i2c_adapter *adap)
+{
+ int ret;
+ u32 reg;
+
+ id->p_msg = msg;
+ id->err_status = 0;
+ reinit_completion(&id->xfer_done);
+
+ /* Check for the TEN Bit mode on each msg */
+ reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ if (msg->flags & I2C_M_TEN) {
+ if (reg & CDNS_I2C_CR_NEA)
+ cdns_i2c_writereg(reg & ~CDNS_I2C_CR_NEA,
+ CDNS_I2C_CR_OFFSET);
+ } else {
+ if (!(reg & CDNS_I2C_CR_NEA))
+ cdns_i2c_writereg(reg | CDNS_I2C_CR_NEA,
+ CDNS_I2C_CR_OFFSET);
+ }
+
+ /* Check for the R/W flag on each msg */
+ if (msg->flags & I2C_M_RD)
+ cdns_i2c_mrecv(id);
+ else
+ cdns_i2c_msend(id);
+
+ /* Wait for the signal of completion */
+ ret = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
+ if (!ret) {
+ cdns_i2c_master_reset(adap);
+ dev_err(id->adap.dev.parent,
+ "timeout waiting on completion\n");
+ return -ETIMEDOUT;
+ }
+
+ cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK,
+ CDNS_I2C_IDR_OFFSET);
+
+ /* If it is bus arbitration error, try again */
+ if (id->err_status & CDNS_I2C_IXR_ARB_LOST)
+ return -EAGAIN;
+
+ return 0;
+}
+
+/**
+ * cdns_i2c_master_xfer - The main i2c transfer function
+ * @adap: pointer to the i2c adapter driver instance
+ * @msgs: pointer to the i2c message structure
+ * @num: the number of messages to transfer
+ *
+ * Initiates the send/recv activity based on the transfer message received.
+ *
+ * Return: number of msgs processed on success, negative error otherwise
+ */
+static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ int ret, count;
+ u32 reg;
+ struct cdns_i2c *id = adap->algo_data;
+
+ /* Check if the bus is free */
+ if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA)
+ return -EAGAIN;
+
+ /*
+ * Set the flag to one when multiple messages are to be
+ * processed with a repeated start.
+ */
+ if (num > 1) {
+ id->bus_hold_flag = 1;
+ reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ reg |= CDNS_I2C_CR_HOLD;
+ cdns_i2c_writereg(reg, CDNS_I2C_CR_OFFSET);
+ } else {
+ id->bus_hold_flag = 0;
+ }
+
+ /* Process the msg one by one */
+ for (count = 0; count < num; count++, msgs++) {
+ if (count == (num - 1))
+ id->bus_hold_flag = 0;
+
+ ret = cdns_i2c_process_msg(id, msgs, adap);
+ if (ret)
+ return ret;
+
+ /* Report the other error interrupts to application */
+ if (id->err_status) {
+ cdns_i2c_master_reset(adap);
+
+ if (id->err_status & CDNS_I2C_IXR_NACK)
+ return -ENXIO;
+
+ return -EIO;
+ }
+ }
+
+ return num;
+}
+
+/**
+ * cdns_i2c_func - Returns the supported features of the I2C driver
+ * @adap: pointer to the i2c adapter structure
+ *
+ * Return: 32 bit value, each bit corresponding to a feature
+ */
+static u32 cdns_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+ (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+static const struct i2c_algorithm cdns_i2c_algo = {
+ .master_xfer = cdns_i2c_master_xfer,
+ .functionality = cdns_i2c_func,
+};
+
+/**
+ * cdns_i2c_calc_divs - Calculate clock dividers
+ * @f: I2C clock frequency
+ * @input_clk: Input clock frequency
+ * @a: First divider (return value)
+ * @b: Second divider (return value)
+ *
+ * f is used as input and output variable. As input it is used as target I2C
+ * frequency. On function exit f holds the actually resulting I2C frequency.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_i2c_calc_divs(unsigned long *f, unsigned long input_clk,
+ unsigned int *a, unsigned int *b)
+{
+ unsigned long fscl = *f, best_fscl = *f, actual_fscl, temp;
+ unsigned int div_a, div_b, calc_div_a = 0, calc_div_b = 0;
+ unsigned int last_error, current_error;
+
+ /* calculate (divisor_a+1) x (divisor_b+1) */
+ temp = input_clk / (22 * fscl);
+
+ /*
+ * If the calculated value is negative or 0, the fscl input is out of
+ * range. Return error.
+ */
+ if (!temp || (temp > (CDNS_I2C_DIVA_MAX * CDNS_I2C_DIVB_MAX)))
+ return -EINVAL;
+
+ last_error = -1;
+ for (div_a = 0; div_a < CDNS_I2C_DIVA_MAX; div_a++) {
+ div_b = DIV_ROUND_UP(input_clk, 22 * fscl * (div_a + 1));
+
+ if ((div_b < 1) || (div_b > CDNS_I2C_DIVB_MAX))
+ continue;
+ div_b--;
+
+ actual_fscl = input_clk / (22 * (div_a + 1) * (div_b + 1));
+
+ if (actual_fscl > fscl)
+ continue;
+
+ current_error = ((actual_fscl > fscl) ? (actual_fscl - fscl) :
+ (fscl - actual_fscl));
+
+ if (last_error > current_error) {
+ calc_div_a = div_a;
+ calc_div_b = div_b;
+ best_fscl = actual_fscl;
+ last_error = current_error;
+ }
+ }
+
+ *a = calc_div_a;
+ *b = calc_div_b;
+ *f = best_fscl;
+
+ return 0;
+}
+
+/**
+ * cdns_i2c_setclk - This function sets the serial clock rate for the I2C device
+ * @clk_in: I2C clock input frequency in Hz
+ * @id: Pointer to the I2C device structure
+ *
+ * The device must be idle rather than busy transferring data before setting
+ * these device options.
+ * The data rate is set by values in the control register.
+ * The formula for determining the correct register values is
+ * Fscl = Fpclk/(22 x (divisor_a+1) x (divisor_b+1))
+ * See the hardware data sheet for a full explanation of setting the serial
+ * clock rate. The clock can not be faster than the input clock divide by 22.
+ * The two most common clock rates are 100KHz and 400KHz.
+ *
+ * Return: 0 on success, negative error otherwise
+ */
+static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
+{
+ unsigned int div_a, div_b;
+ unsigned int ctrl_reg;
+ int ret = 0;
+ unsigned long fscl = id->i2c_clk;
+
+ ret = cdns_i2c_calc_divs(&fscl, clk_in, &div_a, &div_b);
+ if (ret)
+ return ret;
+
+ ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
+ ctrl_reg &= ~(CDNS_I2C_CR_DIVA_MASK | CDNS_I2C_CR_DIVB_MASK);
+ ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
+ (div_b << CDNS_I2C_CR_DIVB_SHIFT));
+ cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
+
+ return 0;
+}
+
+/**
+ * cdns_i2c_clk_notifier_cb - Clock rate change callback
+ * @nb: Pointer to notifier block
+ * @event: Notification reason
+ * @data: Pointer to notification data object
+ *
+ * This function is called when the cdns_i2c input clock frequency changes.
+ * The callback checks whether a valid bus frequency can be generated after the
+ * change. If so, the change is acknowledged, otherwise the change is aborted.
+ * New dividers are written to the HW in the pre- or post change notification
+ * depending on the scaling direction.
+ *
+ * Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK
+ * to acknowedge the change, NOTIFY_DONE if the notification is
+ * considered irrelevant.
+ */
+static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
+ event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct cdns_i2c *id = to_cdns_i2c(nb);
+
+ if (id->suspended)
+ return NOTIFY_OK;
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ {
+ unsigned long input_clk = ndata->new_rate;
+ unsigned long fscl = id->i2c_clk;
+ unsigned int div_a, div_b;
+ int ret;
+
+ ret = cdns_i2c_calc_divs(&fscl, input_clk, &div_a, &div_b);
+ if (ret) {
+ dev_warn(id->adap.dev.parent,
+ "clock rate change rejected\n");
+ return NOTIFY_STOP;
+ }
+
+ /* scale up */
+ if (ndata->new_rate > ndata->old_rate)
+ cdns_i2c_setclk(ndata->new_rate, id);
+
+ return NOTIFY_OK;
+ }
+ case POST_RATE_CHANGE:
+ id->input_clk = ndata->new_rate;
+ /* scale down */
+ if (ndata->new_rate < ndata->old_rate)
+ cdns_i2c_setclk(ndata->new_rate, id);
+ return NOTIFY_OK;
+ case ABORT_RATE_CHANGE:
+ /* scale up */
+ if (ndata->new_rate > ndata->old_rate)
+ cdns_i2c_setclk(ndata->old_rate, id);
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+/**
+ * cdns_i2c_suspend - Suspend method for the driver
+ * @_dev: Address of the platform_device structure
+ *
+ * Put the driver into low power mode.
+ *
+ * Return: 0 always
+ */
+static int __maybe_unused cdns_i2c_suspend(struct device *_dev)
+{
+ struct platform_device *pdev = container_of(_dev,
+ struct platform_device, dev);
+ struct cdns_i2c *xi2c = platform_get_drvdata(pdev);
+
+ clk_disable(xi2c->clk);
+ xi2c->suspended = 1;
+
+ return 0;
+}
+
+/**
+ * cdns_i2c_resume - Resume from suspend
+ * @_dev: Address of the platform_device structure
+ *
+ * Resume operation after suspend.
+ *
+ * Return: 0 on success and error value on error
+ */
+static int __maybe_unused cdns_i2c_resume(struct device *_dev)
+{
+ struct platform_device *pdev = container_of(_dev,
+ struct platform_device, dev);
+ struct cdns_i2c *xi2c = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = clk_enable(xi2c->clk);
+ if (ret) {
+ dev_err(_dev, "Cannot enable clock.\n");
+ return ret;
+ }
+
+ xi2c->suspended = 0;
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cdns_i2c_dev_pm_ops, cdns_i2c_suspend,
+ cdns_i2c_resume);
+
+/**
+ * cdns_i2c_probe - Platform registration call
+ * @pdev: Handle to the platform device structure
+ *
+ * This function does all the memory allocation and registration for the i2c
+ * device. User can modify the address mode to 10 bit address mode using the
+ * ioctl call with option I2C_TENBIT.
+ *
+ * Return: 0 on success, negative error otherwise
+ */
+static int cdns_i2c_probe(struct platform_device *pdev)
+{
+ struct resource *r_mem;
+ struct cdns_i2c *id;
+ int ret;
+
+ id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL);
+ if (!id)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, id);
+
+ r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ id->membase = devm_ioremap_resource(&pdev->dev, r_mem);
+ if (IS_ERR(id->membase))
+ return PTR_ERR(id->membase);
+
+ id->irq = platform_get_irq(pdev, 0);
+
+ id->adap.dev.of_node = pdev->dev.of_node;
+ id->adap.algo = &cdns_i2c_algo;
+ id->adap.timeout = CDNS_I2C_TIMEOUT;
+ id->adap.retries = 3; /* Default retry value. */
+ id->adap.algo_data = id;
+ id->adap.dev.parent = &pdev->dev;
+ init_completion(&id->xfer_done);
+ snprintf(id->adap.name, sizeof(id->adap.name),
+ "Cadence I2C at %08lx", (unsigned long)r_mem->start);
+
+ id->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(id->clk)) {
+ dev_err(&pdev->dev, "input clock not found.\n");
+ return PTR_ERR(id->clk);
+ }
+ ret = clk_prepare_enable(id->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+ return ret;
+ }
+ id->clk_rate_change_nb.notifier_call = cdns_i2c_clk_notifier_cb;
+ if (clk_notifier_register(id->clk, &id->clk_rate_change_nb))
+ dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
+ id->input_clk = clk_get_rate(id->clk);
+
+ ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &id->i2c_clk);
+ if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX))
+ id->i2c_clk = CDNS_I2C_SPEED_DEFAULT;
+
+ cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
+ CDNS_I2C_CR_OFFSET);
+
+ ret = cdns_i2c_setclk(id->input_clk, id);
+ if (ret) {
+ dev_err(&pdev->dev, "invalid SCL clock: %u Hz\n", id->i2c_clk);
+ ret = -EINVAL;
+ goto err_clk_dis;
+ }
+
+ ret = devm_request_irq(&pdev->dev, id->irq, cdns_i2c_isr, 0,
+ DRIVER_NAME, id);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
+ goto err_clk_dis;
+ }
+
+ ret = i2c_add_adapter(&id->adap);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
+ goto err_clk_dis;
+ }
+
+ dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
+ id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
+
+ return 0;
+
+err_clk_dis:
+ clk_disable_unprepare(id->clk);
+ return ret;
+}
+
+/**
+ * cdns_i2c_remove - Unregister the device after releasing the resources
+ * @pdev: Handle to the platform device structure
+ *
+ * This function frees all the resources allocated to the device.
+ *
+ * Return: 0 always
+ */
+static int cdns_i2c_remove(struct platform_device *pdev)
+{
+ struct cdns_i2c *id = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&id->adap);
+ clk_notifier_unregister(id->clk, &id->clk_rate_change_nb);
+ clk_disable_unprepare(id->clk);
+
+ return 0;
+}
+
+static const struct of_device_id cdns_i2c_of_match[] = {
+ { .compatible = "cdns,i2c-r1p10", },
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
+
+static struct platform_driver cdns_i2c_drv = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = cdns_i2c_of_match,
+ .pm = &cdns_i2c_dev_pm_ops,
+ },
+ .probe = cdns_i2c_probe,
+ .remove = cdns_i2c_remove,
+};
+
+module_platform_driver(cdns_i2c_drv);
+
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_DESCRIPTION("Cadence I2C bus driver");
+MODULE_LICENSE("GPL");
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name));
adap->algo = &i2c_davinci_algo;
adap->dev.parent = &pdev->dev;
*
* If your hardware is free from tHD;STA issue, try this one.
*/
- return (ic_clk * tSYMBOL + 5000) / 10000 - 8 + offset;
+ return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
else
/*
* Conditional expression:
* The reason why we need to take into account "tf" here,
* is the same as described in i2c_dw_scl_lcnt().
*/
- return (ic_clk * (tSYMBOL + tf) + 5000) / 10000 - 3 + offset;
+ return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
+ - 3 + offset;
}
static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
* account the fall time of SCL signal (tf). Default tf value
* should be 0.3 us, for safety.
*/
- return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset;
+ return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
}
static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
u32 input_clock_khz;
u32 hcnt, lcnt;
u32 reg;
+ u32 sda_falling_time, scl_falling_time;
input_clock_khz = dev->get_clk_rate_khz(dev);
/* set standard and fast speed deviders for high/low periods */
+ sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
+ scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+
/* Standard-mode */
hcnt = i2c_dw_scl_hcnt(input_clock_khz,
- 40, /* tHD;STA = tHIGH = 4.0 us */
- 3, /* tf = 0.3 us */
+ 4000, /* tHD;STA = tHIGH = 4.0 us */
+ sda_falling_time,
0, /* 0: DW default, 1: Ideal */
0); /* No offset */
lcnt = i2c_dw_scl_lcnt(input_clock_khz,
- 47, /* tLOW = 4.7 us */
- 3, /* tf = 0.3 us */
+ 4700, /* tLOW = 4.7 us */
+ scl_falling_time,
0); /* No offset */
/* Allow platforms to specify the ideal HCNT and LCNT values */
/* Fast-mode */
hcnt = i2c_dw_scl_hcnt(input_clock_khz,
- 6, /* tHD;STA = tHIGH = 0.6 us */
- 3, /* tf = 0.3 us */
+ 600, /* tHD;STA = tHIGH = 0.6 us */
+ sda_falling_time,
0, /* 0: DW default, 1: Ideal */
0); /* No offset */
lcnt = i2c_dw_scl_lcnt(input_clock_khz,
- 13, /* tLOW = 1.3 us */
- 3, /* tf = 0.3 us */
+ 1300, /* tLOW = 1.3 us */
+ scl_falling_time,
0); /* No offset */
if (dev->fs_hcnt && dev->fs_lcnt) {
unsigned int rx_fifo_depth;
int rx_outstanding;
u32 sda_hold_time;
+ u32 sda_falling_time;
+ u32 scl_falling_time;
u16 ss_hcnt;
u16 ss_lcnt;
u16 fs_hcnt;
medfield_3,
medfield_4,
medfield_5,
+
+ baytrail,
+};
+
+struct dw_scl_sda_cfg {
+ u32 ss_hcnt;
+ u32 fs_hcnt;
+ u32 ss_lcnt;
+ u32 fs_lcnt;
+ u32 sda_hold;
};
struct dw_pci_controller {
u32 tx_fifo_depth;
u32 rx_fifo_depth;
u32 clk_khz;
+ u32 functionality;
+ struct dw_scl_sda_cfg *scl_sda_cfg;
};
#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
DW_IC_CON_SLAVE_DISABLE | \
DW_IC_CON_RESTART_EN)
+#define DW_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \
+ I2C_FUNC_SMBUS_BYTE | \
+ I2C_FUNC_SMBUS_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WORD_DATA | \
+ I2C_FUNC_SMBUS_I2C_BLOCK)
+
+/* BayTrail HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg byt_config = {
+ .ss_hcnt = 0x200,
+ .fs_hcnt = 0x55,
+ .ss_lcnt = 0x200,
+ .fs_lcnt = 0x99,
+ .sda_hold = 0x6,
+};
+
static struct dw_pci_controller dw_pci_controllers[] = {
[moorestown_0] = {
.bus_num = 0,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
+ [baytrail] = {
+ .bus_num = -1,
+ .bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
+ .tx_fifo_depth = 32,
+ .rx_fifo_depth = 32,
+ .clk_khz = 100000,
+ .functionality = I2C_FUNC_10BIT_ADDR,
+ .scl_sda_cfg = &byt_config,
+ },
};
static struct i2c_algorithm i2c_dw_algo = {
.master_xfer = i2c_dw_xfer,
.functionality = i2c_dw_func,
};
+#ifdef CONFIG_PM
static int i2c_dw_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
- struct dw_i2c_dev *i2c = pci_get_drvdata(pdev);
- int err;
-
-
- i2c_dw_disable(i2c);
-
- err = pci_save_state(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_save_state failed\n");
- return err;
- }
-
- err = pci_set_power_state(pdev, PCI_D3hot);
- if (err) {
- dev_err(&pdev->dev, "pci_set_power_state failed\n");
- return err;
- }
+ i2c_dw_disable(pci_get_drvdata(pdev));
return 0;
}
static int i2c_dw_pci_resume(struct device *dev)
{
struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
- struct dw_i2c_dev *i2c = pci_get_drvdata(pdev);
- int err;
- u32 enabled;
-
- enabled = i2c_dw_is_enabled(i2c);
- if (enabled)
- return 0;
-
- err = pci_set_power_state(pdev, PCI_D0);
- if (err) {
- dev_err(&pdev->dev, "pci_set_power_state() failed\n");
- return err;
- }
-
- pci_restore_state(pdev);
-
- i2c_dw_init(i2c);
- return 0;
-}
-static int i2c_dw_pci_runtime_idle(struct device *dev)
-{
- int err = pm_schedule_suspend(dev, 500);
- dev_dbg(dev, "runtime_idle called\n");
-
- if (err != 0)
- return 0;
- return -EBUSY;
+ return i2c_dw_init(pci_get_drvdata(pdev));
}
+#endif
-static const struct dev_pm_ops i2c_dw_pm_ops = {
- .resume = i2c_dw_pci_resume,
- .suspend = i2c_dw_pci_suspend,
- SET_RUNTIME_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume,
- i2c_dw_pci_runtime_idle)
-};
+static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
+ i2c_dw_pci_resume, NULL);
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap;
int r;
struct dw_pci_controller *controller;
+ struct dw_scl_sda_cfg *cfg;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__,
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
dev->base = pcim_iomap_table(pdev)[0];
dev->dev = &pdev->dev;
- dev->functionality =
- I2C_FUNC_I2C |
- I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA |
- I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_I2C_BLOCK;
+ dev->functionality = controller->functionality |
+ DW_DEFAULT_FUNCTIONALITY;
+
dev->master_cfg = controller->bus_cfg;
+ if (controller->scl_sda_cfg) {
+ cfg = controller->scl_sda_cfg;
+ dev->ss_hcnt = cfg->ss_hcnt;
+ dev->fs_hcnt = cfg->fs_hcnt;
+ dev->ss_lcnt = cfg->ss_lcnt;
+ dev->fs_lcnt = cfg->fs_lcnt;
+ dev->sda_hold_time = cfg->sda_hold;
+ }
pci_set_drvdata(pdev, dev);
adap->algo = &i2c_dw_algo;
adap->dev.parent = &pdev->dev;
adap->nr = controller->bus_num;
- snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
- adap->nr);
+
+ snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci");
r = devm_request_irq(&pdev->dev, pdev->irq, i2c_dw_isr, IRQF_SHARED,
adap->name, dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
/* work with hotplug and coldplug */
MODULE_ALIAS("i2c_designware-pci");
-static DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
+static const struct pci_device_id i2_designware_pci_ids[] = {
/* Moorestown */
{ PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
{ PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
{ PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
{ PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
{ PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
+ /* Baytrail */
+ { PCI_VDEVICE(INTEL, 0x0F41), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F42), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F43), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F44), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F45), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F46), baytrail },
+ { PCI_VDEVICE(INTEL, 0x0F47), baytrail },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
"i2c-sda-hold-time-ns", &ht);
dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
1000000);
+
+ of_property_read_u32(pdev->dev.of_node,
+ "i2c-sda-falling-time-ns",
+ &dev->sda_falling_time);
+ of_property_read_u32(pdev->dev.of_node,
+ "i2c-scl-falling-time-ns",
+ &dev->scl_falling_time);
}
dev->functionality =
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "Synopsys DesignWare I2C adapter",
sizeof(adap->name));
adap->algo = &i2c_dw_algo;
--- /dev/null
+/*
+ * Copyright (C) 2014 Uwe Kleine-Koenig for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#define DRIVER_NAME "efm32-i2c"
+
+#define MASK_VAL(mask, val) ((val << __ffs(mask)) & mask)
+
+#define REG_CTRL 0x00
+#define REG_CTRL_EN 0x00001
+#define REG_CTRL_SLAVE 0x00002
+#define REG_CTRL_AUTOACK 0x00004
+#define REG_CTRL_AUTOSE 0x00008
+#define REG_CTRL_AUTOSN 0x00010
+#define REG_CTRL_ARBDIS 0x00020
+#define REG_CTRL_GCAMEN 0x00040
+#define REG_CTRL_CLHR__MASK 0x00300
+#define REG_CTRL_BITO__MASK 0x03000
+#define REG_CTRL_BITO_OFF 0x00000
+#define REG_CTRL_BITO_40PCC 0x01000
+#define REG_CTRL_BITO_80PCC 0x02000
+#define REG_CTRL_BITO_160PCC 0x03000
+#define REG_CTRL_GIBITO 0x08000
+#define REG_CTRL_CLTO__MASK 0x70000
+#define REG_CTRL_CLTO_OFF 0x00000
+
+#define REG_CMD 0x04
+#define REG_CMD_START 0x00001
+#define REG_CMD_STOP 0x00002
+#define REG_CMD_ACK 0x00004
+#define REG_CMD_NACK 0x00008
+#define REG_CMD_CONT 0x00010
+#define REG_CMD_ABORT 0x00020
+#define REG_CMD_CLEARTX 0x00040
+#define REG_CMD_CLEARPC 0x00080
+
+#define REG_STATE 0x08
+#define REG_STATE_BUSY 0x00001
+#define REG_STATE_MASTER 0x00002
+#define REG_STATE_TRANSMITTER 0x00004
+#define REG_STATE_NACKED 0x00008
+#define REG_STATE_BUSHOLD 0x00010
+#define REG_STATE_STATE__MASK 0x000e0
+#define REG_STATE_STATE_IDLE 0x00000
+#define REG_STATE_STATE_WAIT 0x00020
+#define REG_STATE_STATE_START 0x00040
+#define REG_STATE_STATE_ADDR 0x00060
+#define REG_STATE_STATE_ADDRACK 0x00080
+#define REG_STATE_STATE_DATA 0x000a0
+#define REG_STATE_STATE_DATAACK 0x000c0
+
+#define REG_STATUS 0x0c
+#define REG_STATUS_PSTART 0x00001
+#define REG_STATUS_PSTOP 0x00002
+#define REG_STATUS_PACK 0x00004
+#define REG_STATUS_PNACK 0x00008
+#define REG_STATUS_PCONT 0x00010
+#define REG_STATUS_PABORT 0x00020
+#define REG_STATUS_TXC 0x00040
+#define REG_STATUS_TXBL 0x00080
+#define REG_STATUS_RXDATAV 0x00100
+
+#define REG_CLKDIV 0x10
+#define REG_CLKDIV_DIV__MASK 0x001ff
+#define REG_CLKDIV_DIV(div) MASK_VAL(REG_CLKDIV_DIV__MASK, (div))
+
+#define REG_SADDR 0x14
+#define REG_SADDRMASK 0x18
+#define REG_RXDATA 0x1c
+#define REG_RXDATAP 0x20
+#define REG_TXDATA 0x24
+#define REG_IF 0x28
+#define REG_IF_START 0x00001
+#define REG_IF_RSTART 0x00002
+#define REG_IF_ADDR 0x00004
+#define REG_IF_TXC 0x00008
+#define REG_IF_TXBL 0x00010
+#define REG_IF_RXDATAV 0x00020
+#define REG_IF_ACK 0x00040
+#define REG_IF_NACK 0x00080
+#define REG_IF_MSTOP 0x00100
+#define REG_IF_ARBLOST 0x00200
+#define REG_IF_BUSERR 0x00400
+#define REG_IF_BUSHOLD 0x00800
+#define REG_IF_TXOF 0x01000
+#define REG_IF_RXUF 0x02000
+#define REG_IF_BITO 0x04000
+#define REG_IF_CLTO 0x08000
+#define REG_IF_SSTOP 0x10000
+
+#define REG_IFS 0x2c
+#define REG_IFC 0x30
+#define REG_IFC__MASK 0x1ffcf
+
+#define REG_IEN 0x34
+
+#define REG_ROUTE 0x38
+#define REG_ROUTE_SDAPEN 0x00001
+#define REG_ROUTE_SCLPEN 0x00002
+#define REG_ROUTE_LOCATION__MASK 0x00700
+#define REG_ROUTE_LOCATION(n) MASK_VAL(REG_ROUTE_LOCATION__MASK, (n))
+
+struct efm32_i2c_ddata {
+ struct i2c_adapter adapter;
+
+ struct clk *clk;
+ void __iomem *base;
+ unsigned int irq;
+ u8 location;
+ unsigned long frequency;
+
+ /* transfer data */
+ struct completion done;
+ struct i2c_msg *msgs;
+ size_t num_msgs;
+ size_t current_word, current_msg;
+ int retval;
+};
+
+static u32 efm32_i2c_read32(struct efm32_i2c_ddata *ddata, unsigned offset)
+{
+ return readl(ddata->base + offset);
+}
+
+static void efm32_i2c_write32(struct efm32_i2c_ddata *ddata,
+ unsigned offset, u32 value)
+{
+ writel(value, ddata->base + offset);
+}
+
+static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata)
+{
+ struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+ efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START);
+ efm32_i2c_write32(ddata, REG_TXDATA, cur_msg->addr << 1 |
+ (cur_msg->flags & I2C_M_RD ? 1 : 0));
+}
+
+static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
+{
+ struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+ if (ddata->current_word >= cur_msg->len) {
+ /* cur_msg completely transferred */
+ ddata->current_word = 0;
+ ddata->current_msg += 1;
+
+ if (ddata->current_msg >= ddata->num_msgs) {
+ efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+ complete(&ddata->done);
+ } else {
+ efm32_i2c_send_next_msg(ddata);
+ }
+ } else {
+ efm32_i2c_write32(ddata, REG_TXDATA,
+ cur_msg->buf[ddata->current_word++]);
+ }
+}
+
+static void efm32_i2c_recv_next_byte(struct efm32_i2c_ddata *ddata)
+{
+ struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+
+ cur_msg->buf[ddata->current_word] = efm32_i2c_read32(ddata, REG_RXDATA);
+ ddata->current_word += 1;
+ if (ddata->current_word >= cur_msg->len) {
+ /* cur_msg completely transferred */
+ ddata->current_word = 0;
+ ddata->current_msg += 1;
+
+ efm32_i2c_write32(ddata, REG_CMD, REG_CMD_NACK);
+
+ if (ddata->current_msg >= ddata->num_msgs) {
+ efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+ complete(&ddata->done);
+ } else {
+ efm32_i2c_send_next_msg(ddata);
+ }
+ } else {
+ efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ACK);
+ }
+}
+
+static irqreturn_t efm32_i2c_irq(int irq, void *dev_id)
+{
+ struct efm32_i2c_ddata *ddata = dev_id;
+ struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
+ u32 irqflag = efm32_i2c_read32(ddata, REG_IF);
+ u32 state = efm32_i2c_read32(ddata, REG_STATE);
+
+ efm32_i2c_write32(ddata, REG_IFC, irqflag & REG_IFC__MASK);
+
+ switch (state & REG_STATE_STATE__MASK) {
+ case REG_STATE_STATE_IDLE:
+ /* arbitration lost? */
+ ddata->retval = -EAGAIN;
+ complete(&ddata->done);
+ break;
+ case REG_STATE_STATE_WAIT:
+ /*
+ * huh, this shouldn't happen.
+ * Reset hardware state and get out
+ */
+ ddata->retval = -EIO;
+ efm32_i2c_write32(ddata, REG_CMD,
+ REG_CMD_STOP | REG_CMD_ABORT |
+ REG_CMD_CLEARTX | REG_CMD_CLEARPC);
+ complete(&ddata->done);
+ break;
+ case REG_STATE_STATE_START:
+ /* "caller" is expected to send an address */
+ break;
+ case REG_STATE_STATE_ADDR:
+ /* wait for Ack or NAck of slave */
+ break;
+ case REG_STATE_STATE_ADDRACK:
+ if (state & REG_STATE_NACKED) {
+ efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+ ddata->retval = -ENXIO;
+ complete(&ddata->done);
+ } else if (cur_msg->flags & I2C_M_RD) {
+ /* wait for slave to send first data byte */
+ } else {
+ efm32_i2c_send_next_byte(ddata);
+ }
+ break;
+ case REG_STATE_STATE_DATA:
+ if (cur_msg->flags & I2C_M_RD) {
+ efm32_i2c_recv_next_byte(ddata);
+ } else {
+ /* wait for Ack or Nack of slave */
+ }
+ break;
+ case REG_STATE_STATE_DATAACK:
+ if (state & REG_STATE_NACKED) {
+ efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
+ complete(&ddata->done);
+ } else {
+ efm32_i2c_send_next_byte(ddata);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int efm32_i2c_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ struct efm32_i2c_ddata *ddata = i2c_get_adapdata(adap);
+ int ret;
+
+ if (ddata->msgs)
+ return -EBUSY;
+
+ ddata->msgs = msgs;
+ ddata->num_msgs = num;
+ ddata->current_word = 0;
+ ddata->current_msg = 0;
+ ddata->retval = -EIO;
+
+ reinit_completion(&ddata->done);
+
+ dev_dbg(&ddata->adapter.dev, "state: %08x, status: %08x\n",
+ efm32_i2c_read32(ddata, REG_STATE),
+ efm32_i2c_read32(ddata, REG_STATUS));
+
+ efm32_i2c_send_next_msg(ddata);
+
+ wait_for_completion(&ddata->done);
+
+ if (ddata->current_msg >= ddata->num_msgs)
+ ret = ddata->num_msgs;
+ else
+ ret = ddata->retval;
+
+ return ret;
+}
+
+static u32 efm32_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm efm32_i2c_algo = {
+ .master_xfer = efm32_i2c_master_xfer,
+ .functionality = efm32_i2c_functionality,
+};
+
+static u32 efm32_i2c_get_configured_location(struct efm32_i2c_ddata *ddata)
+{
+ u32 reg = efm32_i2c_read32(ddata, REG_ROUTE);
+
+ return (reg & REG_ROUTE_LOCATION__MASK) >>
+ __ffs(REG_ROUTE_LOCATION__MASK);
+}
+
+static int efm32_i2c_probe(struct platform_device *pdev)
+{
+ struct efm32_i2c_ddata *ddata;
+ struct resource *res;
+ unsigned long rate;
+ struct device_node *np = pdev->dev.of_node;
+ u32 location, frequency;
+ int ret;
+ u32 clkdiv;
+
+ if (!np)
+ return -EINVAL;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata) {
+ dev_dbg(&pdev->dev, "failed to allocate private data\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, ddata);
+
+ init_completion(&ddata->done);
+ strlcpy(ddata->adapter.name, pdev->name, sizeof(ddata->adapter.name));
+ ddata->adapter.owner = THIS_MODULE;
+ ddata->adapter.algo = &efm32_i2c_algo;
+ ddata->adapter.dev.parent = &pdev->dev;
+ ddata->adapter.dev.of_node = pdev->dev.of_node;
+ i2c_set_adapdata(&ddata->adapter, ddata);
+
+ ddata->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(ddata->clk)) {
+ ret = PTR_ERR(ddata->clk);
+ dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
+ return ret;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to determine base address\n");
+ return -ENODEV;
+ }
+
+ if (resource_size(res) < 0x42) {
+ dev_err(&pdev->dev, "memory resource too small\n");
+ return -EINVAL;
+ }
+
+ ddata->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ddata->base))
+ return PTR_ERR(ddata->base);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
+ dev_err(&pdev->dev, "failed to get irq (%d)\n", ret);
+ if (!ret)
+ ret = -EINVAL;
+ return ret;
+ }
+
+ ddata->irq = ret;
+
+ ret = clk_prepare_enable(ddata->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to enable clock (%d)\n", ret);
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "efm32,location", &location);
+ if (!ret) {
+ dev_dbg(&pdev->dev, "using location %u\n", location);
+ } else {
+ /* default to location configured in hardware */
+ location = efm32_i2c_get_configured_location(ddata);
+
+ dev_info(&pdev->dev, "fall back to location %u\n", location);
+ }
+
+ ddata->location = location;
+
+ ret = of_property_read_u32(np, "clock-frequency", &frequency);
+ if (!ret) {
+ dev_dbg(&pdev->dev, "using frequency %u\n", frequency);
+ } else {
+ frequency = 100000;
+ dev_info(&pdev->dev, "defaulting to 100 kHz\n");
+ }
+ ddata->frequency = frequency;
+
+ rate = clk_get_rate(ddata->clk);
+ if (!rate) {
+ dev_err(&pdev->dev, "there is no input clock available\n");
+ ret = -EINVAL;
+ goto err_disable_clk;
+ }
+ clkdiv = DIV_ROUND_UP(rate, 8 * ddata->frequency) - 1;
+ if (clkdiv >= 0x200) {
+ dev_err(&pdev->dev,
+ "input clock too fast (%lu) to divide down to bus freq (%lu)",
+ rate, ddata->frequency);
+ ret = -EINVAL;
+ goto err_disable_clk;
+ }
+
+ dev_dbg(&pdev->dev, "input clock = %lu, bus freq = %lu, clkdiv = %lu\n",
+ rate, ddata->frequency, (unsigned long)clkdiv);
+ efm32_i2c_write32(ddata, REG_CLKDIV, REG_CLKDIV_DIV(clkdiv));
+
+ efm32_i2c_write32(ddata, REG_ROUTE, REG_ROUTE_SDAPEN |
+ REG_ROUTE_SCLPEN |
+ REG_ROUTE_LOCATION(ddata->location));
+
+ efm32_i2c_write32(ddata, REG_CTRL, REG_CTRL_EN |
+ REG_CTRL_BITO_160PCC | 0 * REG_CTRL_GIBITO);
+
+ efm32_i2c_write32(ddata, REG_IFC, REG_IFC__MASK);
+ efm32_i2c_write32(ddata, REG_IEN, REG_IF_TXC | REG_IF_ACK | REG_IF_NACK
+ | REG_IF_ARBLOST | REG_IF_BUSERR | REG_IF_RXDATAV);
+
+ /* to make bus idle */
+ efm32_i2c_write32(ddata, REG_CMD, REG_CMD_ABORT);
+
+ ret = request_irq(ddata->irq, efm32_i2c_irq, 0, DRIVER_NAME, ddata);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request irq (%d)\n", ret);
+ return ret;
+ }
+
+ ret = i2c_add_adapter(&ddata->adapter);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add i2c adapter (%d)\n", ret);
+ free_irq(ddata->irq, ddata);
+
+err_disable_clk:
+ clk_disable_unprepare(ddata->clk);
+ }
+ return ret;
+}
+
+static int efm32_i2c_remove(struct platform_device *pdev)
+{
+ struct efm32_i2c_ddata *ddata = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&ddata->adapter);
+ free_irq(ddata->irq, ddata);
+ clk_disable_unprepare(ddata->clk);
+
+ return 0;
+}
+
+static const struct of_device_id efm32_i2c_dt_ids[] = {
+ {
+ .compatible = "energymicro,efm32-i2c",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, efm32_i2c_dt_ids);
+
+static struct platform_driver efm32_i2c_driver = {
+ .probe = efm32_i2c_probe,
+ .remove = efm32_i2c_remove,
+
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = efm32_i2c_dt_ids,
+ },
+};
+module_platform_driver(efm32_i2c_driver);
+
+MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
+MODULE_DESCRIPTION("EFM32 i2c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
#define PCI_DEVICE_ID_ML7223_I2C 0x8010
#define PCI_DEVICE_ID_ML7831_I2C 0x8817
-static DEFINE_PCI_DEVICE_TABLE(pch_pcidev_id) = {
+static const struct pci_device_id pch_pcidev_id[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
static int exynos5_i2c_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
- struct exynos5_i2c *i2c = (struct exynos5_i2c *)adap->algo_data;
+ struct exynos5_i2c *i2c = adap->algo_data;
int i = 0, ret = 0, stop = 0;
if (i2c->suspended) {
return 0;
}
+#ifdef CONFIG_PM_SLEEP
static int exynos5_i2c_suspend_noirq(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
return 0;
}
+#endif
static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq,
exynos5_i2c_resume_noirq);
*sda_pin = of_get_gpio(np, 0);
*scl_pin = of_get_gpio(np, 1);
+ if (*sda_pin == -EPROBE_DEFER || *scl_pin == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
if (!gpio_is_valid(*sda_pin) || !gpio_is_valid(*scl_pin)) {
pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n",
np->full_name, *sda_pin, *scl_pin);
.algo_data = &hydra_bit_data,
};
-static DEFINE_PCI_DEVICE_TABLE(hydra_ids) = {
+static const struct pci_device_id hydra_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_HYDRA) },
{ 0, }
};
Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
+ BayTrail (SOC) 0x0f12 32 hard yes yes yes
Features supported by this driver:
Software PEC no
STATUS_ERROR_FLAGS)
/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
.functionality = i801_func,
};
-static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
+static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
{ 0, }
};
/**
* ismt_ids - PCI device IDs supported by this driver
*/
-static DEFINE_PCI_DEVICE_TABLE(ismt_ids) = {
+static const struct pci_device_id ismt_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
#include <linux/interrupt.h>
#include <linux/mv643xx_i2c.h>
#include <linux/platform_device.h>
+#include <linux/reset.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_device.h>
enum {
MV64XXX_I2C_ACTION_INVALID,
MV64XXX_I2C_ACTION_CONTINUE,
- MV64XXX_I2C_ACTION_SEND_START,
MV64XXX_I2C_ACTION_SEND_RESTART,
MV64XXX_I2C_ACTION_OFFLOAD_RESTART,
MV64XXX_I2C_ACTION_SEND_ADDR_1,
bool offload_enabled;
/* 5us delay in order to avoid repeated start timing violation */
bool errata_delay;
+ struct reset_control *rstc;
+ bool irq_clear_inverted;
};
static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
{
u32 dir = 0;
- drv_data->msg = msg;
- drv_data->byte_posn = 0;
- drv_data->bytes_left = msg->len;
- drv_data->aborting = 0;
- drv_data->rc = 0;
drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
if (!drv_data->offload_enabled)
return -EOPNOTSUPP;
- drv_data->msg = msg;
- drv_data->byte_posn = 0;
- drv_data->bytes_left = msg->len;
- drv_data->aborting = 0;
- drv_data->rc = 0;
/* Only regular transactions can be offloaded */
if ((msg->flags & ~(I2C_M_TEN | I2C_M_RD)) != 0)
return -EINVAL;
}
}
+static void mv64xxx_i2c_send_start(struct mv64xxx_i2c_data *drv_data)
+{
+ drv_data->msg = drv_data->msgs;
+ drv_data->byte_posn = 0;
+ drv_data->bytes_left = drv_data->msg->len;
+ drv_data->aborting = 0;
+ drv_data->rc = 0;
+
+ /* Can we offload this msg ? */
+ if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
+ /* No, switch to standard path */
+ mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+ writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
+ drv_data->reg_base + drv_data->reg_offsets.control);
+ }
+}
+
static void
mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
{
drv_data->msgs++;
drv_data->num_msgs--;
- if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
- drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
- writel(drv_data->cntl_bits,
- drv_data->reg_base + drv_data->reg_offsets.control);
+ mv64xxx_i2c_send_start(drv_data);
- /* Setup for the next message */
- mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
- }
if (drv_data->errata_delay)
udelay(5);
drv_data->reg_base + drv_data->reg_offsets.control);
break;
- case MV64XXX_I2C_ACTION_SEND_START:
- /* Can we offload this msg ? */
- if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
- /* No, switch to standard path */
- mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
- writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
- drv_data->reg_base + drv_data->reg_offsets.control);
- }
- break;
-
case MV64XXX_I2C_ACTION_SEND_ADDR_1:
writel(drv_data->addr1,
drv_data->reg_base + drv_data->reg_offsets.data);
status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
mv64xxx_i2c_fsm(drv_data, status);
mv64xxx_i2c_do_action(drv_data);
+
+ if (drv_data->irq_clear_inverted)
+ writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_IFLG,
+ drv_data->reg_base + drv_data->reg_offsets.control);
+
rc = IRQ_HANDLED;
}
spin_unlock_irqrestore(&drv_data->lock, flags);
spin_lock_irqsave(&drv_data->lock, flags);
- drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
drv_data->send_stop = is_last;
drv_data->block = 1;
- mv64xxx_i2c_do_action(drv_data);
+ mv64xxx_i2c_send_start(drv_data);
spin_unlock_irqrestore(&drv_data->lock, flags);
mv64xxx_i2c_wait_for_completion(drv_data);
*/
static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+ { .compatible = "allwinner,sun6i-a31-i2c", .data = &mv64xxx_i2c_regs_sun4i},
{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
{ .compatible = "marvell,mv78230-a0-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
}
drv_data->irq = irq_of_parse_and_map(np, 0);
+ drv_data->rstc = devm_reset_control_get_optional(dev, NULL);
+ if (IS_ERR(drv_data->rstc)) {
+ if (PTR_ERR(drv_data->rstc) == -EPROBE_DEFER) {
+ rc = -EPROBE_DEFER;
+ goto out;
+ }
+ } else {
+ reset_control_deassert(drv_data->rstc);
+ }
+
/* Its not yet defined how timeouts will be specified in device tree.
* So hard code the value to 1 second.
*/
drv_data->offload_enabled = false;
drv_data->errata_delay = true;
}
+
+ if (of_device_is_compatible(np, "allwinner,sun6i-a31-i2c"))
+ drv_data->irq_clear_inverted = true;
+
out:
return rc;
#endif
}
if (drv_data->irq < 0) {
rc = -ENXIO;
- goto exit_clk;
+ goto exit_reset;
}
drv_data->adapter.dev.parent = &pd->dev;
drv_data->adapter.algo = &mv64xxx_i2c_algo;
drv_data->adapter.owner = THIS_MODULE;
- drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
drv_data->adapter.nr = pd->id;
drv_data->adapter.dev.of_node = pd->dev.of_node;
platform_set_drvdata(pd, drv_data);
dev_err(&drv_data->adapter.dev,
"mv64xxx: Can't register intr handler irq%d: %d\n",
drv_data->irq, rc);
- goto exit_clk;
+ goto exit_reset;
} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
dev_err(&drv_data->adapter.dev,
"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
exit_free_irq:
free_irq(drv_data->irq, drv_data);
+exit_reset:
+ if (!IS_ERR_OR_NULL(drv_data->rstc))
+ reset_control_assert(drv_data->rstc);
exit_clk:
#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
i2c_del_adapter(&drv_data->adapter);
free_irq(drv_data->irq, drv_data);
+ if (!IS_ERR_OR_NULL(drv_data->rstc))
+ reset_control_assert(drv_data->rstc);
#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
if (!IS_ERR(drv_data->clk)) {
struct mxs_i2c_dev *i2c;
struct i2c_adapter *adap;
struct resource *res;
- resource_size_t res_size;
int err, irq;
i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq = platform_get_irq(pdev, 0);
-
- if (!res || irq < 0)
- return -ENOENT;
+ i2c->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(i2c->regs))
+ return PTR_ERR(i2c->regs);
- res_size = resource_size(res);
- if (!devm_request_mem_region(dev, res->start, res_size, res->name))
- return -EBUSY;
-
- i2c->regs = devm_ioremap_nocache(dev, res->start, res_size);
- if (!i2c->regs)
- return -EBUSY;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
err = devm_request_irq(dev, irq, mxs_i2c_isr, 0, dev_name(dev), i2c);
if (err)
};
-static DEFINE_PCI_DEVICE_TABLE(nforce2_ids) = {
+static const struct pci_device_id nforce2_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) },
I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */
};
-/**
- * struct nmk_i2c_controller - client specific controller configuration
- * @clk_freq: clock frequency for the operation mode
- * @tft: Tx FIFO Threshold in bytes
- * @rft: Rx FIFO Threshold in bytes
- * @timeout Slave response timeout(ms)
- * @sm: speed mode
- */
-struct nmk_i2c_controller {
- u32 clk_freq;
- unsigned char tft;
- unsigned char rft;
- int timeout;
- enum i2c_freq_mode sm;
-};
-
/**
* struct i2c_vendor_data - per-vendor variations
* @has_mtdws: variant has the MTDWS bit
* @irq: interrupt line for the controller.
* @virtbase: virtual io memory area.
* @clk: hardware i2c block clock.
- * @cfg: machine provided controller configuration.
* @cli: holder of client specific data.
+ * @clk_freq: clock frequency for the operation mode
+ * @tft: Tx FIFO Threshold in bytes
+ * @rft: Rx FIFO Threshold in bytes
+ * @timeout Slave response timeout (ms)
+ * @sm: speed mode
* @stop: stop condition.
* @xfer_complete: acknowledge completion for a I2C message.
* @result: controller propogated result.
- * @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
struct i2c_vendor_data *vendor;
int irq;
void __iomem *virtbase;
struct clk *clk;
- struct nmk_i2c_controller cfg;
struct i2c_nmk_client cli;
+ u32 clk_freq;
+ unsigned char tft;
+ unsigned char rft;
+ int timeout;
+ enum i2c_freq_mode sm;
int stop;
struct completion xfer_complete;
int result;
- bool busy;
};
/* controller's abort causes */
* slsu = cycles / (1000000000 / f) + 1
*/
ns = DIV_ROUND_UP_ULL(1000000000ULL, i2c_clk);
- switch (dev->cfg.sm) {
+ switch (dev->sm) {
case I2C_FREQ_MODE_FAST:
case I2C_FREQ_MODE_FAST_PLUS:
slsu = DIV_ROUND_UP(100, ns); /* Fast */
* 2 whereas it is 3 for fast and fastplus mode of
* operation. TODO - high speed support.
*/
- div = (dev->cfg.clk_freq > 100000) ? 3 : 2;
+ div = (dev->clk_freq > 100000) ? 3 : 2;
/*
* generate the mask for baud rate counters. The controller
* so set brcr1 to 0.
*/
brcr1 = 0 << 16;
- brcr2 = (i2c_clk/(dev->cfg.clk_freq * div)) & 0xffff;
+ brcr2 = (i2c_clk/(dev->clk_freq * div)) & 0xffff;
/* set the baud rate counter register */
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
* TODO - support for fast mode plus (up to 1Mb/s)
* and high speed (up to 3.4 Mb/s)
*/
- if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
+ if (dev->sm > I2C_FREQ_MODE_FAST) {
dev_err(&dev->adev->dev,
"do not support this mode defaulting to std. mode\n");
brcr2 = i2c_clk/(100000 * 2) & 0xffff;
writel(I2C_FREQ_MODE_STANDARD << 4,
dev->virtbase + I2C_CR);
}
- writel(dev->cfg.sm << 4, dev->virtbase + I2C_CR);
+ writel(dev->sm << 4, dev->virtbase + I2C_CR);
/* set the Tx and Rx FIFO threshold */
- writel(dev->cfg.tft, dev->virtbase + I2C_TFTR);
- writel(dev->cfg.rft, dev->virtbase + I2C_RFTR);
+ writel(dev->tft, dev->virtbase + I2C_TFTR);
+ writel(dev->rft, dev->virtbase + I2C_RFTR);
}
/**
static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num_msgs)
{
- int status;
+ int status = 0;
int i;
struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
int j;
- dev->busy = true;
-
pm_runtime_get_sync(&dev->adev->dev);
- status = clk_prepare_enable(dev->clk);
- if (status) {
- dev_err(&dev->adev->dev, "can't prepare_enable clock\n");
- goto out_clk;
- }
-
- /* Optionaly enable pins to be muxed in and configured */
- pinctrl_pm_select_default_state(&dev->adev->dev);
-
- status = init_hw(dev);
- if (status)
- goto out;
-
/* Attempt three times to send the message queue */
for (j = 0; j < 3; j++) {
/* setup the i2c controller */
break;
}
-out:
- clk_disable_unprepare(dev->clk);
-out_clk:
- /* Optionally let pins go into idle state */
- pinctrl_pm_select_idle_state(&dev->adev->dev);
-
pm_runtime_put_sync(&dev->adev->dev);
- dev->busy = false;
-
/* return the no. messages processed */
if (status)
return status;
return IRQ_HANDLED;
}
-
-#ifdef CONFIG_PM
-static int nmk_i2c_suspend(struct device *dev)
+#ifdef CONFIG_PM_SLEEP
+static int nmk_i2c_suspend_late(struct device *dev)
{
- struct amba_device *adev = to_amba_device(dev);
- struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-
- if (nmk_i2c->busy)
- return -EBUSY;
-
pinctrl_pm_select_sleep_state(dev);
return 0;
}
-static int nmk_i2c_resume(struct device *dev)
+static int nmk_i2c_resume_early(struct device *dev)
{
/* First go to the default state */
pinctrl_pm_select_default_state(dev);
return 0;
}
-#else
-#define nmk_i2c_suspend NULL
-#define nmk_i2c_resume NULL
#endif
-/*
- * We use noirq so that we suspend late and resume before the wakeup interrupt
- * to ensure that we do the !pm_runtime_suspended() check in resume before
- * there has been a regular pm runtime resume (via pm_runtime_get_sync()).
- */
+#ifdef CONFIG_PM
+static int nmk_i2c_runtime_suspend(struct device *dev)
+{
+ struct amba_device *adev = to_amba_device(dev);
+ struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+
+ clk_disable_unprepare(nmk_i2c->clk);
+ pinctrl_pm_select_idle_state(dev);
+ return 0;
+}
+
+static int nmk_i2c_runtime_resume(struct device *dev)
+{
+ struct amba_device *adev = to_amba_device(dev);
+ struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
+ int ret;
+
+ ret = clk_prepare_enable(nmk_i2c->clk);
+ if (ret) {
+ dev_err(dev, "can't prepare_enable clock\n");
+ return ret;
+ }
+
+ pinctrl_pm_select_default_state(dev);
+
+ ret = init_hw(nmk_i2c);
+ if (ret) {
+ clk_disable_unprepare(nmk_i2c->clk);
+ pinctrl_pm_select_idle_state(dev);
+ }
+
+ return ret;
+}
+#endif
+
static const struct dev_pm_ops nmk_i2c_pm = {
- .suspend_noirq = nmk_i2c_suspend,
- .resume_noirq = nmk_i2c_resume,
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(nmk_i2c_suspend_late, nmk_i2c_resume_early)
+ SET_PM_RUNTIME_PM_OPS(nmk_i2c_runtime_suspend,
+ nmk_i2c_runtime_resume,
+ NULL)
};
static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
.functionality = nmk_i2c_functionality
};
-static struct nmk_i2c_controller u8500_i2c = {
- .tft = 1, /* Tx FIFO threshold */
- .rft = 8, /* Rx FIFO threshold */
- .clk_freq = 400000, /* fast mode operation */
- .timeout = 200, /* Slave response timeout(ms) */
- .sm = I2C_FREQ_MODE_FAST,
-};
-
static void nmk_i2c_of_probe(struct device_node *np,
- struct nmk_i2c_controller *pdata)
+ struct nmk_i2c_dev *nmk)
{
- of_property_read_u32(np, "clock-frequency", &pdata->clk_freq);
+ /* Default to 100 kHz if no frequency is given in the node */
+ if (of_property_read_u32(np, "clock-frequency", &nmk->clk_freq))
+ nmk->clk_freq = 100000;
/* This driver only supports 'standard' and 'fast' modes of operation. */
- if (pdata->clk_freq <= 100000)
- pdata->sm = I2C_FREQ_MODE_STANDARD;
+ if (nmk->clk_freq <= 100000)
+ nmk->sm = I2C_FREQ_MODE_STANDARD;
else
- pdata->sm = I2C_FREQ_MODE_FAST;
+ nmk->sm = I2C_FREQ_MODE_FAST;
+ nmk->tft = 1; /* Tx FIFO threshold */
+ nmk->rft = 8; /* Rx FIFO threshold */
+ nmk->timeout = 200; /* Slave response timeout(ms) */
}
static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
- struct nmk_i2c_controller *pdata = dev_get_platdata(&adev->dev);
struct device_node *np = adev->dev.of_node;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
struct i2c_vendor_data *vendor = id->data;
u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
- if (!pdata) {
- if (np) {
- pdata = devm_kzalloc(&adev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata) {
- ret = -ENOMEM;
- goto err_no_mem;
- }
- /* Provide the default configuration as a base. */
- memcpy(pdata, &u8500_i2c, sizeof(struct nmk_i2c_controller));
- nmk_i2c_of_probe(np, pdata);
- } else
- /* No i2c configuration found, using the default. */
- pdata = &u8500_i2c;
+ dev = devm_kzalloc(&adev->dev, sizeof(struct nmk_i2c_dev), GFP_KERNEL);
+ if (!dev) {
+ dev_err(&adev->dev, "cannot allocate memory\n");
+ ret = -ENOMEM;
+ goto err_no_mem;
}
+ dev->vendor = vendor;
+ dev->adev = adev;
+ nmk_i2c_of_probe(np, dev);
- if (pdata->tft > max_fifo_threshold) {
+ if (dev->tft > max_fifo_threshold) {
dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
- pdata->tft, max_fifo_threshold);
- pdata->tft = max_fifo_threshold;
+ dev->tft, max_fifo_threshold);
+ dev->tft = max_fifo_threshold;
}
- if (pdata->rft > max_fifo_threshold) {
+ if (dev->rft > max_fifo_threshold) {
dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
- pdata->rft, max_fifo_threshold);
- pdata->rft = max_fifo_threshold;
+ dev->rft, max_fifo_threshold);
+ dev->rft = max_fifo_threshold;
}
- dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
- if (!dev) {
- dev_err(&adev->dev, "cannot allocate memory\n");
- ret = -ENOMEM;
- goto err_no_mem;
- }
- dev->vendor = vendor;
- dev->busy = false;
- dev->adev = adev;
amba_set_drvdata(adev, dev);
- /* Select default pin state */
- pinctrl_pm_select_default_state(&adev->dev);
- /* If possible, let's go to idle until the first transfer */
- pinctrl_pm_select_idle_state(&adev->dev);
-
- dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
- if (!dev->virtbase) {
+ dev->virtbase = devm_ioremap(&adev->dev, adev->res.start,
+ resource_size(&adev->res));
+ if (IS_ERR(dev->virtbase)) {
ret = -ENOMEM;
- goto err_no_ioremap;
+ goto err_no_mem;
}
dev->irq = adev->irq[0];
- ret = request_irq(dev->irq, i2c_irq_handler, 0,
+ ret = devm_request_irq(&adev->dev, dev->irq, i2c_irq_handler, 0,
DRIVER_NAME, dev);
if (ret) {
dev_err(&adev->dev, "cannot claim the irq %d\n", dev->irq);
- goto err_irq;
+ goto err_no_mem;
}
pm_suspend_ignore_children(&adev->dev, true);
- dev->clk = clk_get(&adev->dev, NULL);
+ dev->clk = devm_clk_get(&adev->dev, NULL);
if (IS_ERR(dev->clk)) {
dev_err(&adev->dev, "could not get i2c clock\n");
ret = PTR_ERR(dev->clk);
- goto err_no_clk;
+ goto err_no_mem;
+ }
+
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ dev_err(&adev->dev, "can't prepare_enable clock\n");
+ goto err_no_mem;
}
+ init_hw(dev);
+
adap = &dev->adap;
adap->dev.of_node = np;
adap->dev.parent = &adev->dev;
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
adap->algo = &nmk_i2c_algo;
- adap->timeout = msecs_to_jiffies(pdata->timeout);
+ adap->timeout = msecs_to_jiffies(dev->timeout);
snprintf(adap->name, sizeof(adap->name),
"Nomadik I2C at %pR", &adev->res);
- /* fetch the controller configuration from machine */
- dev->cfg.clk_freq = pdata->clk_freq;
- dev->cfg.tft = pdata->tft;
- dev->cfg.rft = pdata->rft;
- dev->cfg.sm = pdata->sm;
-
i2c_set_adapdata(adap, dev);
dev_info(&adev->dev,
ret = i2c_add_adapter(adap);
if (ret) {
dev_err(&adev->dev, "failed to add adapter\n");
- goto err_add_adap;
+ goto err_no_adap;
}
pm_runtime_put(&adev->dev);
return 0;
- err_add_adap:
- clk_put(dev->clk);
- err_no_clk:
- free_irq(dev->irq, dev);
- err_irq:
- iounmap(dev->virtbase);
- err_no_ioremap:
- kfree(dev);
+ err_no_adap:
+ clk_disable_unprepare(dev->clk);
err_no_mem:
return ret;
clear_all_interrupts(dev);
/* disable the controller */
i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
- free_irq(dev->irq, dev);
- iounmap(dev->virtbase);
+ clk_disable_unprepare(dev->clk);
if (res)
release_mem_region(res->start, resource_size(res));
- clk_put(dev->clk);
- pm_runtime_disable(&adev->dev);
- kfree(dev);
return 0;
}
static struct i2c_adapter ocores_adapter = {
.owner = THIS_MODULE,
.name = "i2c-ocores",
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED,
.algo = &ocores_algorithm,
};
int r;
r = pm_runtime_get_sync(dev->dev);
- if (IS_ERR_VALUE(r))
+ if (r < 0)
goto out;
r = omap_i2c_wait_for_bb(dev);
pm_runtime_use_autosuspend(dev->dev);
r = pm_runtime_get_sync(dev->dev);
- if (IS_ERR_VALUE(r))
+ if (r < 0)
goto err_free_mem;
/*
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
- adap->class = I2C_CLASS_HWMON;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
adap->algo = &omap_i2c_algo;
adap->dev.parent = &pdev->dev;
i2c_del_adapter(&dev->adapter);
ret = pm_runtime_get_sync(&pdev->dev);
- if (IS_ERR_VALUE(ret))
+ if (ret < 0)
return ret;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
kfree(smbus);
}
-static DEFINE_PCI_DEVICE_TABLE(pasemi_smb_ids) = {
+static const struct pci_device_id pasemi_smb_ids[] = {
{ PCI_DEVICE(0x1959, 0xa003) },
{ 0, }
};
.functionality = piix4_func,
};
-static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = {
+static const struct pci_device_id piix4_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) },
{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) },
kfree(sds);
}
-static DEFINE_PCI_DEVICE_TABLE(ce4100_i2c_devices) = {
+static const struct pci_device_id ce4100_i2c_devices[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)},
{ },
};
--- /dev/null
+/*
+ * Copyright (c) 2009-2013, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2014, Sony Mobile Communications AB.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* QUP Registers */
+#define QUP_CONFIG 0x000
+#define QUP_STATE 0x004
+#define QUP_IO_MODE 0x008
+#define QUP_SW_RESET 0x00c
+#define QUP_OPERATIONAL 0x018
+#define QUP_ERROR_FLAGS 0x01c
+#define QUP_ERROR_FLAGS_EN 0x020
+#define QUP_HW_VERSION 0x030
+#define QUP_MX_OUTPUT_CNT 0x100
+#define QUP_OUT_FIFO_BASE 0x110
+#define QUP_MX_WRITE_CNT 0x150
+#define QUP_MX_INPUT_CNT 0x200
+#define QUP_MX_READ_CNT 0x208
+#define QUP_IN_FIFO_BASE 0x218
+#define QUP_I2C_CLK_CTL 0x400
+#define QUP_I2C_STATUS 0x404
+
+/* QUP States and reset values */
+#define QUP_RESET_STATE 0
+#define QUP_RUN_STATE 1
+#define QUP_PAUSE_STATE 3
+#define QUP_STATE_MASK 3
+
+#define QUP_STATE_VALID BIT(2)
+#define QUP_I2C_MAST_GEN BIT(4)
+
+#define QUP_OPERATIONAL_RESET 0x000ff0
+#define QUP_I2C_STATUS_RESET 0xfffffc
+
+/* QUP OPERATIONAL FLAGS */
+#define QUP_I2C_NACK_FLAG BIT(3)
+#define QUP_OUT_NOT_EMPTY BIT(4)
+#define QUP_IN_NOT_EMPTY BIT(5)
+#define QUP_OUT_FULL BIT(6)
+#define QUP_OUT_SVC_FLAG BIT(8)
+#define QUP_IN_SVC_FLAG BIT(9)
+#define QUP_MX_OUTPUT_DONE BIT(10)
+#define QUP_MX_INPUT_DONE BIT(11)
+
+/* I2C mini core related values */
+#define QUP_CLOCK_AUTO_GATE BIT(13)
+#define I2C_MINI_CORE (2 << 8)
+#define I2C_N_VAL 15
+/* Most significant word offset in FIFO port */
+#define QUP_MSW_SHIFT (I2C_N_VAL + 1)
+
+/* Packing/Unpacking words in FIFOs, and IO modes */
+#define QUP_OUTPUT_BLK_MODE (1 << 10)
+#define QUP_INPUT_BLK_MODE (1 << 12)
+#define QUP_UNPACK_EN BIT(14)
+#define QUP_PACK_EN BIT(15)
+
+#define QUP_REPACK_EN (QUP_UNPACK_EN | QUP_PACK_EN)
+
+#define QUP_OUTPUT_BLOCK_SIZE(x)(((x) >> 0) & 0x03)
+#define QUP_OUTPUT_FIFO_SIZE(x) (((x) >> 2) & 0x07)
+#define QUP_INPUT_BLOCK_SIZE(x) (((x) >> 5) & 0x03)
+#define QUP_INPUT_FIFO_SIZE(x) (((x) >> 7) & 0x07)
+
+/* QUP tags */
+#define QUP_TAG_START (1 << 8)
+#define QUP_TAG_DATA (2 << 8)
+#define QUP_TAG_STOP (3 << 8)
+#define QUP_TAG_REC (4 << 8)
+
+/* Status, Error flags */
+#define I2C_STATUS_WR_BUFFER_FULL BIT(0)
+#define I2C_STATUS_BUS_ACTIVE BIT(8)
+#define I2C_STATUS_ERROR_MASK 0x38000fc
+#define QUP_STATUS_ERROR_FLAGS 0x7c
+
+#define QUP_READ_LIMIT 256
+
+struct qup_i2c_dev {
+ struct device *dev;
+ void __iomem *base;
+ int irq;
+ struct clk *clk;
+ struct clk *pclk;
+ struct i2c_adapter adap;
+
+ int clk_ctl;
+ int out_fifo_sz;
+ int in_fifo_sz;
+ int out_blk_sz;
+ int in_blk_sz;
+
+ unsigned long one_byte_t;
+
+ struct i2c_msg *msg;
+ /* Current posion in user message buffer */
+ int pos;
+ /* I2C protocol errors */
+ u32 bus_err;
+ /* QUP core errors */
+ u32 qup_err;
+
+ struct completion xfer;
+};
+
+static irqreturn_t qup_i2c_interrupt(int irq, void *dev)
+{
+ struct qup_i2c_dev *qup = dev;
+ u32 bus_err;
+ u32 qup_err;
+ u32 opflags;
+
+ bus_err = readl(qup->base + QUP_I2C_STATUS);
+ qup_err = readl(qup->base + QUP_ERROR_FLAGS);
+ opflags = readl(qup->base + QUP_OPERATIONAL);
+
+ if (!qup->msg) {
+ /* Clear Error interrupt */
+ writel(QUP_RESET_STATE, qup->base + QUP_STATE);
+ return IRQ_HANDLED;
+ }
+
+ bus_err &= I2C_STATUS_ERROR_MASK;
+ qup_err &= QUP_STATUS_ERROR_FLAGS;
+
+ if (qup_err) {
+ /* Clear Error interrupt */
+ writel(qup_err, qup->base + QUP_ERROR_FLAGS);
+ goto done;
+ }
+
+ if (bus_err) {
+ /* Clear Error interrupt */
+ writel(QUP_RESET_STATE, qup->base + QUP_STATE);
+ goto done;
+ }
+
+ if (opflags & QUP_IN_SVC_FLAG)
+ writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL);
+
+ if (opflags & QUP_OUT_SVC_FLAG)
+ writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL);
+
+done:
+ qup->qup_err = qup_err;
+ qup->bus_err = bus_err;
+ complete(&qup->xfer);
+ return IRQ_HANDLED;
+}
+
+static int qup_i2c_poll_state_mask(struct qup_i2c_dev *qup,
+ u32 req_state, u32 req_mask)
+{
+ int retries = 1;
+ u32 state;
+
+ /*
+ * State transition takes 3 AHB clocks cycles + 3 I2C master clock
+ * cycles. So retry once after a 1uS delay.
+ */
+ do {
+ state = readl(qup->base + QUP_STATE);
+
+ if (state & QUP_STATE_VALID &&
+ (state & req_mask) == req_state)
+ return 0;
+
+ udelay(1);
+ } while (retries--);
+
+ return -ETIMEDOUT;
+}
+
+static int qup_i2c_poll_state(struct qup_i2c_dev *qup, u32 req_state)
+{
+ return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK);
+}
+
+static int qup_i2c_poll_state_valid(struct qup_i2c_dev *qup)
+{
+ return qup_i2c_poll_state_mask(qup, 0, 0);
+}
+
+static int qup_i2c_poll_state_i2c_master(struct qup_i2c_dev *qup)
+{
+ return qup_i2c_poll_state_mask(qup, QUP_I2C_MAST_GEN, QUP_I2C_MAST_GEN);
+}
+
+static int qup_i2c_change_state(struct qup_i2c_dev *qup, u32 state)
+{
+ if (qup_i2c_poll_state_valid(qup) != 0)
+ return -EIO;
+
+ writel(state, qup->base + QUP_STATE);
+
+ if (qup_i2c_poll_state(qup, state) != 0)
+ return -EIO;
+ return 0;
+}
+
+static int qup_i2c_wait_writeready(struct qup_i2c_dev *qup)
+{
+ unsigned long timeout;
+ u32 opflags;
+ u32 status;
+
+ timeout = jiffies + HZ;
+
+ for (;;) {
+ opflags = readl(qup->base + QUP_OPERATIONAL);
+ status = readl(qup->base + QUP_I2C_STATUS);
+
+ if (!(opflags & QUP_OUT_NOT_EMPTY) &&
+ !(status & I2C_STATUS_BUS_ACTIVE))
+ return 0;
+
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ usleep_range(qup->one_byte_t, qup->one_byte_t * 2);
+ }
+}
+
+static void qup_i2c_set_write_mode(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ /* Number of entries to shift out, including the start */
+ int total = msg->len + 1;
+
+ if (total < qup->out_fifo_sz) {
+ /* FIFO mode */
+ writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+ writel(total, qup->base + QUP_MX_WRITE_CNT);
+ } else {
+ /* BLOCK mode (transfer data on chunks) */
+ writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN,
+ qup->base + QUP_IO_MODE);
+ writel(total, qup->base + QUP_MX_OUTPUT_CNT);
+ }
+}
+
+static void qup_i2c_issue_write(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ u32 addr = msg->addr << 1;
+ u32 qup_tag;
+ u32 opflags;
+ int idx;
+ u32 val;
+
+ if (qup->pos == 0) {
+ val = QUP_TAG_START | addr;
+ idx = 1;
+ } else {
+ val = 0;
+ idx = 0;
+ }
+
+ while (qup->pos < msg->len) {
+ /* Check that there's space in the FIFO for our pair */
+ opflags = readl(qup->base + QUP_OPERATIONAL);
+ if (opflags & QUP_OUT_FULL)
+ break;
+
+ if (qup->pos == msg->len - 1)
+ qup_tag = QUP_TAG_STOP;
+ else
+ qup_tag = QUP_TAG_DATA;
+
+ if (idx & 1)
+ val |= (qup_tag | msg->buf[qup->pos]) << QUP_MSW_SHIFT;
+ else
+ val = qup_tag | msg->buf[qup->pos];
+
+ /* Write out the pair and the last odd value */
+ if (idx & 1 || qup->pos == msg->len - 1)
+ writel(val, qup->base + QUP_OUT_FIFO_BASE);
+
+ qup->pos++;
+ idx++;
+ }
+}
+
+static int qup_i2c_write_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ unsigned long left;
+ int ret;
+
+ qup->msg = msg;
+ qup->pos = 0;
+
+ enable_irq(qup->irq);
+
+ qup_i2c_set_write_mode(qup, msg);
+
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
+ goto err;
+
+ writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+ do {
+ ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+ if (ret)
+ goto err;
+
+ qup_i2c_issue_write(qup, msg);
+
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
+ goto err;
+
+ left = wait_for_completion_timeout(&qup->xfer, HZ);
+ if (!left) {
+ writel(1, qup->base + QUP_SW_RESET);
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ if (qup->bus_err || qup->qup_err) {
+ if (qup->bus_err & QUP_I2C_NACK_FLAG)
+ dev_err(qup->dev, "NACK from %x\n", msg->addr);
+ ret = -EIO;
+ goto err;
+ }
+ } while (qup->pos < msg->len);
+
+ /* Wait for the outstanding data in the fifo to drain */
+ ret = qup_i2c_wait_writeready(qup);
+
+err:
+ disable_irq(qup->irq);
+ qup->msg = NULL;
+
+ return ret;
+}
+
+static void qup_i2c_set_read_mode(struct qup_i2c_dev *qup, int len)
+{
+ if (len < qup->in_fifo_sz) {
+ /* FIFO mode */
+ writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE);
+ writel(len, qup->base + QUP_MX_READ_CNT);
+ } else {
+ /* BLOCK mode (transfer data on chunks) */
+ writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN,
+ qup->base + QUP_IO_MODE);
+ writel(len, qup->base + QUP_MX_INPUT_CNT);
+ }
+}
+
+static void qup_i2c_issue_read(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ u32 addr, len, val;
+
+ addr = (msg->addr << 1) | 1;
+
+ /* 0 is used to specify a length 256 (QUP_READ_LIMIT) */
+ len = (msg->len == QUP_READ_LIMIT) ? 0 : msg->len;
+
+ val = ((QUP_TAG_REC | len) << QUP_MSW_SHIFT) | QUP_TAG_START | addr;
+ writel(val, qup->base + QUP_OUT_FIFO_BASE);
+}
+
+
+static void qup_i2c_read_fifo(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ u32 opflags;
+ u32 val = 0;
+ int idx;
+
+ for (idx = 0; qup->pos < msg->len; idx++) {
+ if ((idx & 1) == 0) {
+ /* Check that FIFO have data */
+ opflags = readl(qup->base + QUP_OPERATIONAL);
+ if (!(opflags & QUP_IN_NOT_EMPTY))
+ break;
+
+ /* Reading 2 words at time */
+ val = readl(qup->base + QUP_IN_FIFO_BASE);
+
+ msg->buf[qup->pos++] = val & 0xFF;
+ } else {
+ msg->buf[qup->pos++] = val >> QUP_MSW_SHIFT;
+ }
+ }
+}
+
+static int qup_i2c_read_one(struct qup_i2c_dev *qup, struct i2c_msg *msg)
+{
+ unsigned long left;
+ int ret;
+
+ /*
+ * The QUP block will issue a NACK and STOP on the bus when reaching
+ * the end of the read, the length of the read is specified as one byte
+ * which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
+ */
+ if (msg->len > QUP_READ_LIMIT) {
+ dev_err(qup->dev, "HW not capable of reads over %d bytes\n",
+ QUP_READ_LIMIT);
+ return -EINVAL;
+ }
+
+ qup->msg = msg;
+ qup->pos = 0;
+
+ enable_irq(qup->irq);
+
+ qup_i2c_set_read_mode(qup, msg->len);
+
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
+ goto err;
+
+ writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL);
+
+ ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE);
+ if (ret)
+ goto err;
+
+ qup_i2c_issue_read(qup, msg);
+
+ ret = qup_i2c_change_state(qup, QUP_RUN_STATE);
+ if (ret)
+ goto err;
+
+ do {
+ left = wait_for_completion_timeout(&qup->xfer, HZ);
+ if (!left) {
+ writel(1, qup->base + QUP_SW_RESET);
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ if (qup->bus_err || qup->qup_err) {
+ if (qup->bus_err & QUP_I2C_NACK_FLAG)
+ dev_err(qup->dev, "NACK from %x\n", msg->addr);
+ ret = -EIO;
+ goto err;
+ }
+
+ qup_i2c_read_fifo(qup, msg);
+ } while (qup->pos < msg->len);
+
+err:
+ disable_irq(qup->irq);
+ qup->msg = NULL;
+
+ return ret;
+}
+
+static int qup_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msgs[],
+ int num)
+{
+ struct qup_i2c_dev *qup = i2c_get_adapdata(adap);
+ int ret, idx;
+
+ ret = pm_runtime_get_sync(qup->dev);
+ if (ret)
+ goto out;
+
+ writel(1, qup->base + QUP_SW_RESET);
+ ret = qup_i2c_poll_state(qup, QUP_RESET_STATE);
+ if (ret)
+ goto out;
+
+ /* Configure QUP as I2C mini core */
+ writel(I2C_MINI_CORE | I2C_N_VAL, qup->base + QUP_CONFIG);
+
+ for (idx = 0; idx < num; idx++) {
+ if (msgs[idx].len == 0) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (qup_i2c_poll_state_i2c_master(qup)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ if (msgs[idx].flags & I2C_M_RD)
+ ret = qup_i2c_read_one(qup, &msgs[idx]);
+ else
+ ret = qup_i2c_write_one(qup, &msgs[idx]);
+
+ if (ret)
+ break;
+
+ ret = qup_i2c_change_state(qup, QUP_RESET_STATE);
+ if (ret)
+ break;
+ }
+
+ if (ret == 0)
+ ret = num;
+out:
+
+ pm_runtime_mark_last_busy(qup->dev);
+ pm_runtime_put_autosuspend(qup->dev);
+
+ return ret;
+}
+
+static u32 qup_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm qup_i2c_algo = {
+ .master_xfer = qup_i2c_xfer,
+ .functionality = qup_i2c_func,
+};
+
+static void qup_i2c_enable_clocks(struct qup_i2c_dev *qup)
+{
+ clk_prepare_enable(qup->clk);
+ clk_prepare_enable(qup->pclk);
+}
+
+static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup)
+{
+ u32 config;
+
+ qup_i2c_change_state(qup, QUP_RESET_STATE);
+ clk_disable_unprepare(qup->clk);
+ config = readl(qup->base + QUP_CONFIG);
+ config |= QUP_CLOCK_AUTO_GATE;
+ writel(config, qup->base + QUP_CONFIG);
+ clk_disable_unprepare(qup->pclk);
+}
+
+static int qup_i2c_probe(struct platform_device *pdev)
+{
+ static const int blk_sizes[] = {4, 16, 32};
+ struct device_node *node = pdev->dev.of_node;
+ struct qup_i2c_dev *qup;
+ unsigned long one_bit_t;
+ struct resource *res;
+ u32 io_mode, hw_ver, size;
+ int ret, fs_div, hs_div;
+ int src_clk_freq;
+ u32 clk_freq = 100000;
+
+ qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
+ if (!qup)
+ return -ENOMEM;
+
+ qup->dev = &pdev->dev;
+ init_completion(&qup->xfer);
+ platform_set_drvdata(pdev, qup);
+
+ of_property_read_u32(node, "clock-frequency", &clk_freq);
+
+ /* We support frequencies up to FAST Mode (400KHz) */
+ if (!clk_freq || clk_freq > 400000) {
+ dev_err(qup->dev, "clock frequency not supported %d\n",
+ clk_freq);
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ qup->base = devm_ioremap_resource(qup->dev, res);
+ if (IS_ERR(qup->base))
+ return PTR_ERR(qup->base);
+
+ qup->irq = platform_get_irq(pdev, 0);
+ if (qup->irq < 0) {
+ dev_err(qup->dev, "No IRQ defined\n");
+ return qup->irq;
+ }
+
+ qup->clk = devm_clk_get(qup->dev, "core");
+ if (IS_ERR(qup->clk)) {
+ dev_err(qup->dev, "Could not get core clock\n");
+ return PTR_ERR(qup->clk);
+ }
+
+ qup->pclk = devm_clk_get(qup->dev, "iface");
+ if (IS_ERR(qup->pclk)) {
+ dev_err(qup->dev, "Could not get iface clock\n");
+ return PTR_ERR(qup->pclk);
+ }
+
+ qup_i2c_enable_clocks(qup);
+
+ /*
+ * Bootloaders might leave a pending interrupt on certain QUP's,
+ * so we reset the core before registering for interrupts.
+ */
+ writel(1, qup->base + QUP_SW_RESET);
+ ret = qup_i2c_poll_state_valid(qup);
+ if (ret)
+ goto fail;
+
+ ret = devm_request_irq(qup->dev, qup->irq, qup_i2c_interrupt,
+ IRQF_TRIGGER_HIGH, "i2c_qup", qup);
+ if (ret) {
+ dev_err(qup->dev, "Request %d IRQ failed\n", qup->irq);
+ goto fail;
+ }
+ disable_irq(qup->irq);
+
+ hw_ver = readl(qup->base + QUP_HW_VERSION);
+ dev_dbg(qup->dev, "Revision %x\n", hw_ver);
+
+ io_mode = readl(qup->base + QUP_IO_MODE);
+
+ /*
+ * The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag'
+ * associated with each byte written/received
+ */
+ size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
+ if (size >= ARRAY_SIZE(blk_sizes))
+ return -EIO;
+ qup->out_blk_sz = blk_sizes[size] / 2;
+
+ size = QUP_INPUT_BLOCK_SIZE(io_mode);
+ if (size >= ARRAY_SIZE(blk_sizes))
+ return -EIO;
+ qup->in_blk_sz = blk_sizes[size] / 2;
+
+ size = QUP_OUTPUT_FIFO_SIZE(io_mode);
+ qup->out_fifo_sz = qup->out_blk_sz * (2 << size);
+
+ size = QUP_INPUT_FIFO_SIZE(io_mode);
+ qup->in_fifo_sz = qup->in_blk_sz * (2 << size);
+
+ src_clk_freq = clk_get_rate(qup->clk);
+ fs_div = ((src_clk_freq / clk_freq) / 2) - 3;
+ hs_div = 3;
+ qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff);
+
+ /*
+ * Time it takes for a byte to be clocked out on the bus.
+ * Each byte takes 9 clock cycles (8 bits + 1 ack).
+ */
+ one_bit_t = (USEC_PER_SEC / clk_freq) + 1;
+ qup->one_byte_t = one_bit_t * 9;
+
+ dev_dbg(qup->dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
+ qup->in_blk_sz, qup->in_fifo_sz,
+ qup->out_blk_sz, qup->out_fifo_sz);
+
+ i2c_set_adapdata(&qup->adap, qup);
+ qup->adap.algo = &qup_i2c_algo;
+ qup->adap.dev.parent = qup->dev;
+ qup->adap.dev.of_node = pdev->dev.of_node;
+ strlcpy(qup->adap.name, "QUP I2C adapter", sizeof(qup->adap.name));
+
+ ret = i2c_add_adapter(&qup->adap);
+ if (ret)
+ goto fail;
+
+ pm_runtime_set_autosuspend_delay(qup->dev, MSEC_PER_SEC);
+ pm_runtime_use_autosuspend(qup->dev);
+ pm_runtime_set_active(qup->dev);
+ pm_runtime_enable(qup->dev);
+ return 0;
+
+fail:
+ qup_i2c_disable_clocks(qup);
+ return ret;
+}
+
+static int qup_i2c_remove(struct platform_device *pdev)
+{
+ struct qup_i2c_dev *qup = platform_get_drvdata(pdev);
+
+ disable_irq(qup->irq);
+ qup_i2c_disable_clocks(qup);
+ i2c_del_adapter(&qup->adap);
+ pm_runtime_disable(qup->dev);
+ pm_runtime_set_suspended(qup->dev);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int qup_i2c_pm_suspend_runtime(struct device *device)
+{
+ struct qup_i2c_dev *qup = dev_get_drvdata(device);
+
+ dev_dbg(device, "pm_runtime: suspending...\n");
+ qup_i2c_disable_clocks(qup);
+ return 0;
+}
+
+static int qup_i2c_pm_resume_runtime(struct device *device)
+{
+ struct qup_i2c_dev *qup = dev_get_drvdata(device);
+
+ dev_dbg(device, "pm_runtime: resuming...\n");
+ qup_i2c_enable_clocks(qup);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int qup_i2c_suspend(struct device *device)
+{
+ qup_i2c_pm_suspend_runtime(device);
+ return 0;
+}
+
+static int qup_i2c_resume(struct device *device)
+{
+ qup_i2c_pm_resume_runtime(device);
+ pm_runtime_mark_last_busy(device);
+ pm_request_autosuspend(device);
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops qup_i2c_qup_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(
+ qup_i2c_suspend,
+ qup_i2c_resume)
+ SET_RUNTIME_PM_OPS(
+ qup_i2c_pm_suspend_runtime,
+ qup_i2c_pm_resume_runtime,
+ NULL)
+};
+
+static const struct of_device_id qup_i2c_dt_match[] = {
+ { .compatible = "qcom,i2c-qup-v1.1.1" },
+ { .compatible = "qcom,i2c-qup-v2.1.1" },
+ { .compatible = "qcom,i2c-qup-v2.2.1" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qup_i2c_dt_match);
+
+static struct platform_driver qup_i2c_driver = {
+ .probe = qup_i2c_probe,
+ .remove = qup_i2c_remove,
+ .driver = {
+ .name = "i2c_qup",
+ .owner = THIS_MODULE,
+ .pm = &qup_i2c_qup_pm_ops,
+ .of_match_table = qup_i2c_dt_match,
+ },
+};
+
+module_platform_driver(qup_i2c_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c_qup");
{ .compatible = "renesas,i2c-r8a7778", .data = (void *)I2C_RCAR_GEN1 },
{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
{ .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 },
+ { .compatible = "renesas,i2c-r8a7791", .data = (void *)I2C_RCAR_GEN2 },
{},
};
MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
adap = &priv->adap;
adap->nr = pdev->id;
adap->algo = &rcar_i2c_algo;
- adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
adap->retries = 3;
adap->dev.parent = dev;
adap->dev.of_node = dev->of_node;
return IRQ_HANDLED;
}
+/*
+ * Disable the bus so that we won't get any interrupts from now on, or try
+ * to drive any lines. This is the default state when we don't have
+ * anything to send/receive.
+ *
+ * If there is an event on the bus, or we have a pre-existing event at
+ * kernel boot time, we may not notice the event and the I2C controller
+ * will lock the bus with the I2C clock line low indefinitely.
+ */
+static inline void s3c24xx_i2c_disable_bus(struct s3c24xx_i2c *i2c)
+{
+ unsigned long tmp;
+
+ /* Stop driving the I2C pins */
+ tmp = readl(i2c->regs + S3C2410_IICSTAT);
+ tmp &= ~S3C2410_IICSTAT_TXRXEN;
+ writel(tmp, i2c->regs + S3C2410_IICSTAT);
+
+ /* We don't expect any interrupts now, and don't want send acks */
+ tmp = readl(i2c->regs + S3C2410_IICCON);
+ tmp &= ~(S3C2410_IICCON_IRQEN | S3C2410_IICCON_IRQPEND |
+ S3C2410_IICCON_ACKEN);
+ writel(tmp, i2c->regs + S3C2410_IICCON);
+}
+
/* s3c24xx_i2c_set_master
*
s3c24xx_i2c_wait_idle(i2c);
+ s3c24xx_i2c_disable_bus(i2c);
+
out:
+ i2c->state = STATE_IDLE;
+
return ret;
}
static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
{
- unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN;
struct s3c2410_platform_i2c *pdata;
unsigned int freq;
dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
- writel(iicon, i2c->regs + S3C2410_IICCON);
+ writel(0, i2c->regs + S3C2410_IICCON);
+ writel(0, i2c->regs + S3C2410_IICSTAT);
/* we need to work out the divisors for the clock... */
if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
- writel(0, i2c->regs + S3C2410_IICCON);
dev_err(i2c->dev, "cannot meet bus frequency required\n");
return -EINVAL;
}
/* todo - check that the i2c lines aren't being dragged anywhere */
dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
- dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
+ dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02x\n",
+ readl(i2c->regs + S3C2410_IICCON));
return 0;
}
i2c->adap.owner = THIS_MODULE;
i2c->adap.algo = &s3c24xx_i2c_algorithm;
i2c->adap.retries = 2;
- i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED;
i2c->tx_setup = 50;
init_waitqueue_head(&i2c->wait);
goto out;
}
adap = &siic->adapter;
- adap->class = I2C_CLASS_HWMON;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
siic->base = devm_ioremap_resource(&pdev->dev, mem_res);
.algo = &smbus_algorithm,
};
-static DEFINE_PCI_DEVICE_TABLE(sis5595_ids) = {
+static const struct pci_device_id sis5595_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
{ 0, }
};
.retries = 3
};
-static DEFINE_PCI_DEVICE_TABLE(sis630_ids) = {
+static const struct pci_device_id sis630_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) },
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) },
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_964) },
.algo = &smbus_algorithm,
};
-static DEFINE_PCI_DEVICE_TABLE(sis96x_ids) = {
+static const struct pci_device_id sis96x_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) },
{ 0, }
};
writel_relaxed(it, i2c_dev->base + SSC_IEN);
st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STOPG);
- c->result = -EIO;
+ c->result = -EAGAIN;
break;
default:
adap = &dev->adapter;
adap->owner = THIS_MODULE;
/* DDC class but actually often used for more generic I2C */
- adap->class = I2C_CLASS_DDC;
+ adap->class = I2C_CLASS_DDC | I2C_CLASS_DEPRECATED;
strlcpy(adap->name, "ST Microelectronics DDC I2C adapter",
sizeof(adap->name));
adap->nr = bus_nr;
i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
i2c_dev->adapter.owner = THIS_MODULE;
- i2c_dev->adapter.class = I2C_CLASS_HWMON;
+ i2c_dev->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_DEPRECATED;
strlcpy(i2c_dev->adapter.name, "Tegra I2C adapter",
sizeof(i2c_dev->adapter.name));
i2c_dev->adapter.algo = &tegra_i2c_algo;
};
-static DEFINE_PCI_DEVICE_TABLE(vt586b_ids) = {
+static const struct pci_device_id vt586b_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3) },
{ 0, }
};
return error;
}
-static DEFINE_PCI_DEVICE_TABLE(vt596_ids) = {
+static const struct pci_device_id vt596_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3),
.driver_data = SMBBA1 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3),
static struct i2c_adapter xiic_adapter = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD | I2C_CLASS_DEPRECATED,
.algo = &xiic_algorithm,
};
.remove = scx200_remove,
};
-static DEFINE_PCI_DEVICE_TABLE(scx200_isa) = {
+static const struct pci_device_id scx200_isa[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) },
{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) },
{ 0, }
#include <linux/rwsem.h>
#include <linux/pm_runtime.h>
#include <linux/acpi.h>
+#include <linux/jump_label.h>
#include <asm/uaccess.h>
#include "i2c-core.h"
+#define CREATE_TRACE_POINTS
+#include <trace/events/i2c.h>
/* core_lock protects i2c_adapter_idr, and guarantees
that device detection, deletion of detected devices, and attach_adapter
static struct device_type i2c_client_type;
static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver);
+static struct static_key i2c_trace_msg = STATIC_KEY_INIT_FALSE;
+
+void i2c_transfer_trace_reg(void)
+{
+ static_key_slow_inc(&i2c_trace_msg);
+}
+
+void i2c_transfer_trace_unreg(void)
+{
+ static_key_slow_dec(&i2c_trace_msg);
+}
+
/* ------------------------------------------------------------------------- */
static const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
class_compat_unregister(i2c_adapter_compat_class);
#endif
bus_unregister(&i2c_bus_type);
+ tracepoint_synchronize_unregister();
}
/* We must initialize early, because some subsystems register i2c drivers
unsigned long orig_jiffies;
int ret, try;
+ /* i2c_trace_msg gets enabled when tracepoint i2c_transfer gets
+ * enabled. This is an efficient way of keeping the for-loop from
+ * being executed when not needed.
+ */
+ if (static_key_false(&i2c_trace_msg)) {
+ int i;
+ for (i = 0; i < num; i++)
+ if (msgs[i].flags & I2C_M_RD)
+ trace_i2c_read(adap, &msgs[i], i);
+ else
+ trace_i2c_write(adap, &msgs[i], i);
+ }
+
/* Retry automatically on arbitration loss */
orig_jiffies = jiffies;
for (ret = 0, try = 0; try <= adap->retries; try++) {
break;
}
+ if (static_key_false(&i2c_trace_msg)) {
+ int i;
+ for (i = 0; i < ret; i++)
+ if (msgs[i].flags & I2C_M_RD)
+ trace_i2c_reply(adap, &msgs[i], i);
+ trace_i2c_result(adap, i, ret);
+ }
+
return ret;
}
EXPORT_SYMBOL(__i2c_transfer);
struct i2c_client *client;
/* Detection succeeded, instantiate the device */
+ if (adapter->class & I2C_CLASS_DEPRECATED)
+ dev_warn(&adapter->dev,
+ "This adapter will soon drop class based instantiation of devices. "
+ "Please make sure client 0x%02x gets instantiated by other means. "
+ "Check 'Documentation/i2c/instantiating-devices' for details.\n",
+ info.addr);
+
dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
info.type, info.addr);
client = i2c_new_device(adapter, &info);
int try;
s32 res;
+ /* If enabled, the following two tracepoints are conditional on
+ * read_write and protocol.
+ */
+ trace_smbus_write(adapter, addr, flags, read_write,
+ command, protocol, data);
+ trace_smbus_read(adapter, addr, flags, read_write,
+ command, protocol);
+
flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
if (adapter->algo->smbus_xfer) {
i2c_unlock_adapter(adapter);
if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
- return res;
+ goto trace;
/*
* Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
* implement native support for the SMBus operation.
*/
}
- return i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
- command, protocol, data);
+ res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
+ command, protocol, data);
+
+trace:
+ /* If enabled, the reply tracepoint is conditional on read_write. */
+ trace_smbus_reply(adapter, addr, flags, read_write,
+ command, protocol, data);
+ trace_smbus_result(adapter, addr, flags, read_write,
+ command, protocol, res);
+
+ return res;
}
EXPORT_SYMBOL(i2c_smbus_xfer);
.enter = NULL }
};
+static struct cpuidle_state byt_cstates[] = {
+ {
+ .name = "C1-BYT",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-BYT",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 15,
+ .target_residency = 30,
+ .enter = &intel_idle },
+ {
+ .name = "C6N-BYT",
+ .desc = "MWAIT 0x58",
+ .flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 40,
+ .target_residency = 275,
+ .enter = &intel_idle },
+ {
+ .name = "C6S-BYT",
+ .desc = "MWAIT 0x52",
+ .flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 140,
+ .target_residency = 560,
+ .enter = &intel_idle },
+ {
+ .name = "C7-BYT",
+ .desc = "MWAIT 0x60",
+ .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 1200,
+ .target_residency = 1500,
+ .enter = &intel_idle },
+ {
+ .name = "C7S-BYT",
+ .desc = "MWAIT 0x64",
+ .flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 10000,
+ .target_residency = 20000,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
static struct cpuidle_state ivb_cstates[] = {
{
.name = "C1-IVB",
.enter = NULL }
};
+static struct cpuidle_state ivt_cstates[] = {
+ {
+ .name = "C1-IVT",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-IVT",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 80,
+ .enter = &intel_idle },
+ {
+ .name = "C3-IVT",
+ .desc = "MWAIT 0x10",
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 59,
+ .target_residency = 156,
+ .enter = &intel_idle },
+ {
+ .name = "C6-IVT",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 82,
+ .target_residency = 300,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
+static struct cpuidle_state ivt_cstates_4s[] = {
+ {
+ .name = "C1-IVT-4S",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-IVT-4S",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 250,
+ .enter = &intel_idle },
+ {
+ .name = "C3-IVT-4S",
+ .desc = "MWAIT 0x10",
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 59,
+ .target_residency = 300,
+ .enter = &intel_idle },
+ {
+ .name = "C6-IVT-4S",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 84,
+ .target_residency = 400,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
+static struct cpuidle_state ivt_cstates_8s[] = {
+ {
+ .name = "C1-IVT-8S",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ {
+ .name = "C1E-IVT-8S",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 500,
+ .enter = &intel_idle },
+ {
+ .name = "C3-IVT-8S",
+ .desc = "MWAIT 0x10",
+ .flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 59,
+ .target_residency = 600,
+ .enter = &intel_idle },
+ {
+ .name = "C6-IVT-8S",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 88,
+ .target_residency = 700,
+ .enter = &intel_idle },
+ {
+ .enter = NULL }
+};
+
static struct cpuidle_state hsw_cstates[] = {
{
.name = "C1-HSW",
.disable_promotion_to_c1e = true,
};
+static const struct idle_cpu idle_cpu_byt = {
+ .state_table = byt_cstates,
+ .disable_promotion_to_c1e = true,
+};
+
static const struct idle_cpu idle_cpu_ivb = {
.state_table = ivb_cstates,
.disable_promotion_to_c1e = true,
};
+static const struct idle_cpu idle_cpu_ivt = {
+ .state_table = ivt_cstates,
+ .disable_promotion_to_c1e = true,
+};
+
static const struct idle_cpu idle_cpu_hsw = {
.state_table = hsw_cstates,
.disable_promotion_to_c1e = true,
ICPU(0x2f, idle_cpu_nehalem),
ICPU(0x2a, idle_cpu_snb),
ICPU(0x2d, idle_cpu_snb),
+ ICPU(0x36, idle_cpu_atom),
+ ICPU(0x37, idle_cpu_byt),
ICPU(0x3a, idle_cpu_ivb),
- ICPU(0x3e, idle_cpu_ivb),
+ ICPU(0x3e, idle_cpu_ivt),
ICPU(0x3c, idle_cpu_hsw),
ICPU(0x3f, idle_cpu_hsw),
ICPU(0x45, idle_cpu_hsw),
free_percpu(intel_idle_cpuidle_devices);
return;
}
+
+/*
+ * intel_idle_state_table_update()
+ *
+ * Update the default state_table for this CPU-id
+ *
+ * Currently used to access tuned IVT multi-socket targets
+ * Assumption: num_sockets == (max_package_num + 1)
+ */
+void intel_idle_state_table_update(void)
+{
+ /* IVT uses a different table for 1-2, 3-4, and > 4 sockets */
+ if (boot_cpu_data.x86_model == 0x3e) { /* IVT */
+ int cpu, package_num, num_sockets = 1;
+
+ for_each_online_cpu(cpu) {
+ package_num = topology_physical_package_id(cpu);
+ if (package_num + 1 > num_sockets) {
+ num_sockets = package_num + 1;
+
+ if (num_sockets > 4)
+ cpuidle_state_table = ivt_cstates_8s;
+ return;
+ }
+ }
+
+ if (num_sockets > 2)
+ cpuidle_state_table = ivt_cstates_4s;
+ /* else, 1 and 2 socket systems use default ivt_cstates */
+ }
+ return;
+}
+
/*
* intel_idle_cpuidle_driver_init()
* allocate, initialize cpuidle_states
int cstate;
struct cpuidle_driver *drv = &intel_idle_driver;
+ intel_idle_state_table_update();
+
drv->state_count = 1;
for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) {
- int num_substates, mwait_hint, mwait_cstate, mwait_substate;
+ int num_substates, mwait_hint, mwait_cstate;
if (cpuidle_state_table[cstate].enter == NULL)
break;
mwait_hint = flg2MWAIT(cpuidle_state_table[cstate].flags);
mwait_cstate = MWAIT_HINT2CSTATE(mwait_hint);
- mwait_substate = MWAIT_HINT2SUBSTATE(mwait_hint);
- /* does the state exist in CPUID.MWAIT? */
+ /* number of sub-states for this state in CPUID.MWAIT */
num_substates = (mwait_substates >> ((mwait_cstate + 1) * 4))
& MWAIT_SUBSTATE_MASK;
- /* if sub-state in table is not enumerated by CPUID */
- if ((mwait_substate + 1) > num_substates)
+ /* if NO sub-states for this state in CPUID, skip it */
+ if (num_substates == 0)
continue;
if (((mwait_cstate + 1) > 2) &&
static int
isert_reg_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
struct isert_rdma_wr *wr);
+static int
+isert_put_response(struct iscsi_conn *conn, struct iscsi_cmd *cmd);
static void
isert_qp_event_callback(struct ib_event *e, void *context)
}
static int
-isert_conn_setup_qp(struct isert_conn *isert_conn, struct rdma_cm_id *cma_id)
+isert_conn_setup_qp(struct isert_conn *isert_conn, struct rdma_cm_id *cma_id,
+ u8 protection)
{
struct isert_device *device = isert_conn->conn_device;
struct ib_qp_init_attr attr;
attr.cap.max_recv_sge = 1;
attr.sq_sig_type = IB_SIGNAL_REQ_WR;
attr.qp_type = IB_QPT_RC;
+ if (protection)
+ attr.create_flags |= IB_QP_CREATE_SIGNATURE_EN;
pr_debug("isert_conn_setup_qp cma_id->device: %p\n",
cma_id->device);
return ret;
/* asign function handlers */
- if (dev_attr->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS) {
+ if (dev_attr->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS &&
+ dev_attr->device_cap_flags & IB_DEVICE_SIGNATURE_HANDOVER) {
device->use_fastreg = 1;
device->reg_rdma_mem = isert_reg_rdma;
device->unreg_rdma_mem = isert_unreg_rdma;
device->unreg_rdma_mem = isert_unmap_cmd;
}
+ /* Check signature cap */
+ device->pi_capable = dev_attr->device_cap_flags &
+ IB_DEVICE_SIGNATURE_HANDOVER ? true : false;
+
device->cqs_used = min_t(int, num_online_cpus(),
device->ib_device->num_comp_vectors);
device->cqs_used = min(ISERT_MAX_CQ, device->cqs_used);
pr_debug("Using %d CQs, device %s supports %d vectors support "
- "Fast registration %d\n",
+ "Fast registration %d pi_capable %d\n",
device->cqs_used, device->ib_device->name,
- device->ib_device->num_comp_vectors, device->use_fastreg);
+ device->ib_device->num_comp_vectors, device->use_fastreg,
+ device->pi_capable);
device->cq_desc = kzalloc(sizeof(struct isert_cq_desc) *
device->cqs_used, GFP_KERNEL);
if (!device->cq_desc) {
list_del(&fr_desc->list);
ib_free_fast_reg_page_list(fr_desc->data_frpl);
ib_dereg_mr(fr_desc->data_mr);
+ if (fr_desc->pi_ctx) {
+ ib_free_fast_reg_page_list(fr_desc->pi_ctx->prot_frpl);
+ ib_dereg_mr(fr_desc->pi_ctx->prot_mr);
+ ib_destroy_mr(fr_desc->pi_ctx->sig_mr);
+ kfree(fr_desc->pi_ctx);
+ }
kfree(fr_desc);
++i;
}
static int
isert_create_fr_desc(struct ib_device *ib_device, struct ib_pd *pd,
- struct fast_reg_descriptor *fr_desc)
+ struct fast_reg_descriptor *fr_desc, u8 protection)
{
+ int ret;
+
fr_desc->data_frpl = ib_alloc_fast_reg_page_list(ib_device,
ISCSI_ISER_SG_TABLESIZE);
if (IS_ERR(fr_desc->data_frpl)) {
if (IS_ERR(fr_desc->data_mr)) {
pr_err("Failed to allocate data frmr err=%ld\n",
PTR_ERR(fr_desc->data_mr));
- ib_free_fast_reg_page_list(fr_desc->data_frpl);
- return PTR_ERR(fr_desc->data_mr);
+ ret = PTR_ERR(fr_desc->data_mr);
+ goto err_data_frpl;
}
pr_debug("Create fr_desc %p page_list %p\n",
fr_desc, fr_desc->data_frpl->page_list);
+ fr_desc->ind |= ISERT_DATA_KEY_VALID;
+
+ if (protection) {
+ struct ib_mr_init_attr mr_init_attr = {0};
+ struct pi_context *pi_ctx;
+
+ fr_desc->pi_ctx = kzalloc(sizeof(*fr_desc->pi_ctx), GFP_KERNEL);
+ if (!fr_desc->pi_ctx) {
+ pr_err("Failed to allocate pi context\n");
+ ret = -ENOMEM;
+ goto err_data_mr;
+ }
+ pi_ctx = fr_desc->pi_ctx;
+
+ pi_ctx->prot_frpl = ib_alloc_fast_reg_page_list(ib_device,
+ ISCSI_ISER_SG_TABLESIZE);
+ if (IS_ERR(pi_ctx->prot_frpl)) {
+ pr_err("Failed to allocate prot frpl err=%ld\n",
+ PTR_ERR(pi_ctx->prot_frpl));
+ ret = PTR_ERR(pi_ctx->prot_frpl);
+ goto err_pi_ctx;
+ }
- fr_desc->valid = true;
+ pi_ctx->prot_mr = ib_alloc_fast_reg_mr(pd, ISCSI_ISER_SG_TABLESIZE);
+ if (IS_ERR(pi_ctx->prot_mr)) {
+ pr_err("Failed to allocate prot frmr err=%ld\n",
+ PTR_ERR(pi_ctx->prot_mr));
+ ret = PTR_ERR(pi_ctx->prot_mr);
+ goto err_prot_frpl;
+ }
+ fr_desc->ind |= ISERT_PROT_KEY_VALID;
+
+ mr_init_attr.max_reg_descriptors = 2;
+ mr_init_attr.flags |= IB_MR_SIGNATURE_EN;
+ pi_ctx->sig_mr = ib_create_mr(pd, &mr_init_attr);
+ if (IS_ERR(pi_ctx->sig_mr)) {
+ pr_err("Failed to allocate signature enabled mr err=%ld\n",
+ PTR_ERR(pi_ctx->sig_mr));
+ ret = PTR_ERR(pi_ctx->sig_mr);
+ goto err_prot_mr;
+ }
+ fr_desc->ind |= ISERT_SIG_KEY_VALID;
+ }
+ fr_desc->ind &= ~ISERT_PROTECTED;
return 0;
+err_prot_mr:
+ ib_dereg_mr(fr_desc->pi_ctx->prot_mr);
+err_prot_frpl:
+ ib_free_fast_reg_page_list(fr_desc->pi_ctx->prot_frpl);
+err_pi_ctx:
+ kfree(fr_desc->pi_ctx);
+err_data_mr:
+ ib_dereg_mr(fr_desc->data_mr);
+err_data_frpl:
+ ib_free_fast_reg_page_list(fr_desc->data_frpl);
+
+ return ret;
}
static int
-isert_conn_create_fastreg_pool(struct isert_conn *isert_conn)
+isert_conn_create_fastreg_pool(struct isert_conn *isert_conn, u8 pi_support)
{
struct fast_reg_descriptor *fr_desc;
struct isert_device *device = isert_conn->conn_device;
- int i, ret;
+ struct se_session *se_sess = isert_conn->conn->sess->se_sess;
+ struct se_node_acl *se_nacl = se_sess->se_node_acl;
+ int i, ret, tag_num;
+ /*
+ * Setup the number of FRMRs based upon the number of tags
+ * available to session in iscsi_target_locate_portal().
+ */
+ tag_num = max_t(u32, ISCSIT_MIN_TAGS, se_nacl->queue_depth);
+ tag_num = (tag_num * 2) + ISCSIT_EXTRA_TAGS;
- INIT_LIST_HEAD(&isert_conn->conn_fr_pool);
isert_conn->conn_fr_pool_size = 0;
- for (i = 0; i < ISCSI_DEF_XMIT_CMDS_MAX; i++) {
+ for (i = 0; i < tag_num; i++) {
fr_desc = kzalloc(sizeof(*fr_desc), GFP_KERNEL);
if (!fr_desc) {
pr_err("Failed to allocate fast_reg descriptor\n");
}
ret = isert_create_fr_desc(device->ib_device,
- isert_conn->conn_pd, fr_desc);
+ isert_conn->conn_pd, fr_desc,
+ pi_support);
if (ret) {
pr_err("Failed to create fastreg descriptor err=%d\n",
ret);
struct isert_device *device;
struct ib_device *ib_dev = cma_id->device;
int ret = 0;
+ u8 pi_support = np->tpg_np->tpg->tpg_attrib.t10_pi;
pr_debug("Entering isert_connect_request cma_id: %p, context: %p\n",
cma_id, cma_id->context);
kref_get(&isert_conn->conn_kref);
mutex_init(&isert_conn->conn_mutex);
spin_lock_init(&isert_conn->conn_lock);
+ INIT_LIST_HEAD(&isert_conn->conn_fr_pool);
cma_id->context = isert_conn;
isert_conn->conn_cm_id = cma_id;
goto out_mr;
}
- if (device->use_fastreg) {
- ret = isert_conn_create_fastreg_pool(isert_conn);
- if (ret) {
- pr_err("Conn: %p failed to create fastreg pool\n",
- isert_conn);
- goto out_fastreg;
- }
+ if (pi_support && !device->pi_capable) {
+ pr_err("Protection information requested but not supported\n");
+ ret = -EINVAL;
+ goto out_mr;
}
- ret = isert_conn_setup_qp(isert_conn, cma_id);
+ ret = isert_conn_setup_qp(isert_conn, cma_id, pi_support);
if (ret)
goto out_conn_dev;
return 0;
out_conn_dev:
- if (device->use_fastreg)
- isert_conn_free_fastreg_pool(isert_conn);
-out_fastreg:
ib_dereg_mr(isert_conn->conn_mr);
out_mr:
ib_dealloc_pd(isert_conn->conn_pd);
}
if (!login->login_failed) {
if (login->login_complete) {
+ if (isert_conn->conn_device->use_fastreg) {
+ u8 pi_support = login->np->tpg_np->tpg->tpg_attrib.t10_pi;
+
+ ret = isert_conn_create_fastreg_pool(isert_conn,
+ pi_support);
+ if (ret) {
+ pr_err("Conn: %p failed to create"
+ " fastreg pool\n", isert_conn);
+ return ret;
+ }
+ }
+
ret = isert_alloc_rx_descriptors(isert_conn);
if (ret)
return ret;
}
}
+static int
+isert_map_data_buf(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
+ struct scatterlist *sg, u32 nents, u32 length, u32 offset,
+ enum iser_ib_op_code op, struct isert_data_buf *data)
+{
+ struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
+
+ data->dma_dir = op == ISER_IB_RDMA_WRITE ?
+ DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+ data->len = length - offset;
+ data->offset = offset;
+ data->sg_off = data->offset / PAGE_SIZE;
+
+ data->sg = &sg[data->sg_off];
+ data->nents = min_t(unsigned int, nents - data->sg_off,
+ ISCSI_ISER_SG_TABLESIZE);
+ data->len = min_t(unsigned int, data->len, ISCSI_ISER_SG_TABLESIZE *
+ PAGE_SIZE);
+
+ data->dma_nents = ib_dma_map_sg(ib_dev, data->sg, data->nents,
+ data->dma_dir);
+ if (unlikely(!data->dma_nents)) {
+ pr_err("Cmd: unable to dma map SGs %p\n", sg);
+ return -EINVAL;
+ }
+
+ pr_debug("Mapped cmd: %p count: %u sg: %p sg_nents: %u rdma_len %d\n",
+ isert_cmd, data->dma_nents, data->sg, data->nents, data->len);
+
+ return 0;
+}
+
+static void
+isert_unmap_data_buf(struct isert_conn *isert_conn, struct isert_data_buf *data)
+{
+ struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
+
+ ib_dma_unmap_sg(ib_dev, data->sg, data->nents, data->dma_dir);
+ memset(data, 0, sizeof(*data));
+}
+
+
+
static void
isert_unmap_cmd(struct isert_cmd *isert_cmd, struct isert_conn *isert_conn)
{
struct isert_rdma_wr *wr = &isert_cmd->rdma_wr;
- struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
pr_debug("isert_unmap_cmd: %p\n", isert_cmd);
- if (wr->sge) {
+
+ if (wr->data.sg) {
pr_debug("isert_unmap_cmd: %p unmap_sg op\n", isert_cmd);
- ib_dma_unmap_sg(ib_dev, wr->sge, wr->num_sge,
- (wr->iser_ib_op == ISER_IB_RDMA_WRITE) ?
- DMA_TO_DEVICE : DMA_FROM_DEVICE);
- wr->sge = NULL;
+ isert_unmap_data_buf(isert_conn, &wr->data);
}
if (wr->send_wr) {
isert_unreg_rdma(struct isert_cmd *isert_cmd, struct isert_conn *isert_conn)
{
struct isert_rdma_wr *wr = &isert_cmd->rdma_wr;
- struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
LIST_HEAD(unmap_list);
pr_debug("unreg_fastreg_cmd: %p\n", isert_cmd);
if (wr->fr_desc) {
pr_debug("unreg_fastreg_cmd: %p free fr_desc %p\n",
isert_cmd, wr->fr_desc);
+ if (wr->fr_desc->ind & ISERT_PROTECTED) {
+ isert_unmap_data_buf(isert_conn, &wr->prot);
+ wr->fr_desc->ind &= ~ISERT_PROTECTED;
+ }
spin_lock_bh(&isert_conn->conn_lock);
list_add_tail(&wr->fr_desc->list, &isert_conn->conn_fr_pool);
spin_unlock_bh(&isert_conn->conn_lock);
wr->fr_desc = NULL;
}
- if (wr->sge) {
+ if (wr->data.sg) {
pr_debug("unreg_fastreg_cmd: %p unmap_sg op\n", isert_cmd);
- ib_dma_unmap_sg(ib_dev, wr->sge, wr->num_sge,
- (wr->iser_ib_op == ISER_IB_RDMA_WRITE) ?
- DMA_TO_DEVICE : DMA_FROM_DEVICE);
- wr->sge = NULL;
+ isert_unmap_data_buf(isert_conn, &wr->data);
}
wr->ib_sge = NULL;
}
static void
-isert_put_cmd(struct isert_cmd *isert_cmd)
+isert_put_cmd(struct isert_cmd *isert_cmd, bool comp_err)
{
struct iscsi_cmd *cmd = isert_cmd->iscsi_cmd;
struct isert_conn *isert_conn = isert_cmd->conn;
list_del_init(&cmd->i_conn_node);
spin_unlock_bh(&conn->cmd_lock);
- if (cmd->data_direction == DMA_TO_DEVICE)
+ if (cmd->data_direction == DMA_TO_DEVICE) {
iscsit_stop_dataout_timer(cmd);
+ /*
+ * Check for special case during comp_err where
+ * WRITE_PENDING has been handed off from core,
+ * but requires an extra target_put_sess_cmd()
+ * before transport_generic_free_cmd() below.
+ */
+ if (comp_err &&
+ cmd->se_cmd.t_state == TRANSPORT_WRITE_PENDING) {
+ struct se_cmd *se_cmd = &cmd->se_cmd;
+
+ target_put_sess_cmd(se_cmd->se_sess, se_cmd);
+ }
+ }
device->unreg_rdma_mem(isert_cmd, isert_conn);
transport_generic_free_cmd(&cmd->se_cmd, 0);
static void
isert_completion_put(struct iser_tx_desc *tx_desc, struct isert_cmd *isert_cmd,
- struct ib_device *ib_dev)
+ struct ib_device *ib_dev, bool comp_err)
{
if (isert_cmd->pdu_buf_dma != 0) {
pr_debug("Calling ib_dma_unmap_single for isert_cmd->pdu_buf_dma\n");
}
isert_unmap_tx_desc(tx_desc, ib_dev);
- isert_put_cmd(isert_cmd);
+ isert_put_cmd(isert_cmd, comp_err);
+}
+
+static int
+isert_check_pi_status(struct se_cmd *se_cmd, struct ib_mr *sig_mr)
+{
+ struct ib_mr_status mr_status;
+ int ret;
+
+ ret = ib_check_mr_status(sig_mr, IB_MR_CHECK_SIG_STATUS, &mr_status);
+ if (ret) {
+ pr_err("ib_check_mr_status failed, ret %d\n", ret);
+ goto fail_mr_status;
+ }
+
+ if (mr_status.fail_status & IB_MR_CHECK_SIG_STATUS) {
+ u64 sec_offset_err;
+ u32 block_size = se_cmd->se_dev->dev_attrib.block_size + 8;
+
+ switch (mr_status.sig_err.err_type) {
+ case IB_SIG_BAD_GUARD:
+ se_cmd->pi_err = TCM_LOGICAL_BLOCK_GUARD_CHECK_FAILED;
+ break;
+ case IB_SIG_BAD_REFTAG:
+ se_cmd->pi_err = TCM_LOGICAL_BLOCK_REF_TAG_CHECK_FAILED;
+ break;
+ case IB_SIG_BAD_APPTAG:
+ se_cmd->pi_err = TCM_LOGICAL_BLOCK_APP_TAG_CHECK_FAILED;
+ break;
+ }
+ sec_offset_err = mr_status.sig_err.sig_err_offset;
+ do_div(sec_offset_err, block_size);
+ se_cmd->bad_sector = sec_offset_err + se_cmd->t_task_lba;
+
+ pr_err("isert: PI error found type %d at sector 0x%llx "
+ "expected 0x%x vs actual 0x%x\n",
+ mr_status.sig_err.err_type,
+ (unsigned long long)se_cmd->bad_sector,
+ mr_status.sig_err.expected,
+ mr_status.sig_err.actual);
+ ret = 1;
+ }
+
+fail_mr_status:
+ return ret;
+}
+
+static void
+isert_completion_rdma_write(struct iser_tx_desc *tx_desc,
+ struct isert_cmd *isert_cmd)
+{
+ struct isert_rdma_wr *wr = &isert_cmd->rdma_wr;
+ struct iscsi_cmd *cmd = isert_cmd->iscsi_cmd;
+ struct se_cmd *se_cmd = &cmd->se_cmd;
+ struct isert_conn *isert_conn = isert_cmd->conn;
+ struct isert_device *device = isert_conn->conn_device;
+ int ret = 0;
+
+ if (wr->fr_desc && wr->fr_desc->ind & ISERT_PROTECTED) {
+ ret = isert_check_pi_status(se_cmd,
+ wr->fr_desc->pi_ctx->sig_mr);
+ wr->fr_desc->ind &= ~ISERT_PROTECTED;
+ }
+
+ device->unreg_rdma_mem(isert_cmd, isert_conn);
+ wr->send_wr_num = 0;
+ if (ret)
+ transport_send_check_condition_and_sense(se_cmd,
+ se_cmd->pi_err, 0);
+ else
+ isert_put_response(isert_conn->conn, cmd);
}
static void
struct se_cmd *se_cmd = &cmd->se_cmd;
struct isert_conn *isert_conn = isert_cmd->conn;
struct isert_device *device = isert_conn->conn_device;
+ int ret = 0;
+
+ if (wr->fr_desc && wr->fr_desc->ind & ISERT_PROTECTED) {
+ ret = isert_check_pi_status(se_cmd,
+ wr->fr_desc->pi_ctx->sig_mr);
+ wr->fr_desc->ind &= ~ISERT_PROTECTED;
+ }
iscsit_stop_dataout_timer(cmd);
device->unreg_rdma_mem(isert_cmd, isert_conn);
- cmd->write_data_done = wr->cur_rdma_length;
+ cmd->write_data_done = wr->data.len;
wr->send_wr_num = 0;
pr_debug("Cmd: %p RDMA_READ comp calling execute_cmd\n", isert_cmd);
cmd->i_state = ISTATE_RECEIVED_LAST_DATAOUT;
spin_unlock_bh(&cmd->istate_lock);
- target_execute_cmd(se_cmd);
+ if (ret)
+ transport_send_check_condition_and_sense(se_cmd,
+ se_cmd->pi_err, 0);
+ else
+ target_execute_cmd(se_cmd);
}
static void
iscsit_tmr_post_handler(cmd, cmd->conn);
cmd->i_state = ISTATE_SENT_STATUS;
- isert_completion_put(&isert_cmd->tx_desc, isert_cmd, ib_dev);
+ isert_completion_put(&isert_cmd->tx_desc, isert_cmd, ib_dev, false);
break;
case ISTATE_SEND_REJECT:
pr_debug("Got isert_do_control_comp ISTATE_SEND_REJECT: >>>\n");
atomic_dec(&isert_conn->post_send_buf_count);
cmd->i_state = ISTATE_SENT_STATUS;
- isert_completion_put(&isert_cmd->tx_desc, isert_cmd, ib_dev);
+ isert_completion_put(&isert_cmd->tx_desc, isert_cmd, ib_dev, false);
break;
case ISTATE_SEND_LOGOUTRSP:
pr_debug("Calling iscsit_logout_post_handler >>>>>>>>>>>>>>\n");
case ISTATE_SEND_TEXTRSP:
atomic_dec(&isert_conn->post_send_buf_count);
cmd->i_state = ISTATE_SENT_STATUS;
- isert_completion_put(&isert_cmd->tx_desc, isert_cmd, ib_dev);
+ isert_completion_put(&isert_cmd->tx_desc, isert_cmd, ib_dev, false);
break;
default:
pr_err("Unknown do_control_comp i_state %d\n", cmd->i_state);
queue_work(isert_comp_wq, &isert_cmd->comp_work);
return;
}
- atomic_sub(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
+
+ /**
+ * If send_wr_num is 0 this means that we got
+ * RDMA completion and we cleared it and we should
+ * simply decrement the response post. else the
+ * response is incorporated in send_wr_num, just
+ * sub it.
+ **/
+ if (wr->send_wr_num)
+ atomic_sub(wr->send_wr_num, &isert_conn->post_send_buf_count);
+ else
+ atomic_dec(&isert_conn->post_send_buf_count);
cmd->i_state = ISTATE_SENT_STATUS;
- isert_completion_put(tx_desc, isert_cmd, ib_dev);
+ isert_completion_put(tx_desc, isert_cmd, ib_dev, false);
}
static void
isert_conn, ib_dev);
break;
case ISER_IB_RDMA_WRITE:
- pr_err("isert_send_completion: Got ISER_IB_RDMA_WRITE\n");
- dump_stack();
+ pr_debug("isert_send_completion: Got ISER_IB_RDMA_WRITE\n");
+ atomic_sub(wr->send_wr_num, &isert_conn->post_send_buf_count);
+ isert_completion_rdma_write(tx_desc, isert_cmd);
break;
case ISER_IB_RDMA_READ:
pr_debug("isert_send_completion: Got ISER_IB_RDMA_READ:\n");
llnode = llist_next(llnode);
wr = &t->isert_cmd->rdma_wr;
- atomic_sub(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
- isert_completion_put(t, t->isert_cmd, ib_dev);
+ /**
+ * If send_wr_num is 0 this means that we got
+ * RDMA completion and we cleared it and we should
+ * simply decrement the response post. else the
+ * response is incorporated in send_wr_num, just
+ * sub it.
+ **/
+ if (wr->send_wr_num)
+ atomic_sub(wr->send_wr_num,
+ &isert_conn->post_send_buf_count);
+ else
+ atomic_dec(&isert_conn->post_send_buf_count);
+
+ isert_completion_put(t, t->isert_cmd, ib_dev, true);
}
}
llnode = llist_next(llnode);
wr = &t->isert_cmd->rdma_wr;
- atomic_sub(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
- isert_completion_put(t, t->isert_cmd, ib_dev);
+ /**
+ * If send_wr_num is 0 this means that we got
+ * RDMA completion and we cleared it and we should
+ * simply decrement the response post. else the
+ * response is incorporated in send_wr_num, just
+ * sub it.
+ **/
+ if (wr->send_wr_num)
+ atomic_sub(wr->send_wr_num,
+ &isert_conn->post_send_buf_count);
+ else
+ atomic_dec(&isert_conn->post_send_buf_count);
+
+ isert_completion_put(t, t->isert_cmd, ib_dev, true);
}
tx_desc->comp_llnode_batch = NULL;
if (!isert_cmd)
isert_unmap_tx_desc(tx_desc, ib_dev);
else
- isert_completion_put(tx_desc, isert_cmd, ib_dev);
+ isert_completion_put(tx_desc, isert_cmd, ib_dev, true);
}
static void
return isert_post_response(isert_conn, isert_cmd);
}
+static void
+isert_aborted_task(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
+{
+ struct isert_cmd *isert_cmd = iscsit_priv_cmd(cmd);
+ struct isert_conn *isert_conn = (struct isert_conn *)conn->context;
+ struct isert_device *device = isert_conn->conn_device;
+
+ spin_lock_bh(&conn->cmd_lock);
+ if (!list_empty(&cmd->i_conn_node))
+ list_del_init(&cmd->i_conn_node);
+ spin_unlock_bh(&conn->cmd_lock);
+
+ if (cmd->data_direction == DMA_TO_DEVICE)
+ iscsit_stop_dataout_timer(cmd);
+
+ device->unreg_rdma_mem(isert_cmd, isert_conn);
+}
+
+static enum target_prot_op
+isert_get_sup_prot_ops(struct iscsi_conn *conn)
+{
+ struct isert_conn *isert_conn = (struct isert_conn *)conn->context;
+ struct isert_device *device = isert_conn->conn_device;
+
+ if (device->pi_capable)
+ return TARGET_PROT_ALL;
+
+ return TARGET_PROT_NORMAL;
+}
+
static int
isert_put_nopin(struct iscsi_cmd *cmd, struct iscsi_conn *conn,
bool nopout_response)
struct se_cmd *se_cmd = &cmd->se_cmd;
struct isert_cmd *isert_cmd = iscsit_priv_cmd(cmd);
struct isert_conn *isert_conn = (struct isert_conn *)conn->context;
- struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
+ struct isert_data_buf *data = &wr->data;
struct ib_send_wr *send_wr;
struct ib_sge *ib_sge;
- struct scatterlist *sg_start;
- u32 sg_off = 0, sg_nents;
- u32 offset = 0, data_len, data_left, rdma_write_max, va_offset = 0;
- int ret = 0, count, i, ib_sge_cnt;
+ u32 offset, data_len, data_left, rdma_write_max, va_offset = 0;
+ int ret = 0, i, ib_sge_cnt;
- if (wr->iser_ib_op == ISER_IB_RDMA_WRITE) {
- data_left = se_cmd->data_length;
- } else {
- sg_off = cmd->write_data_done / PAGE_SIZE;
- data_left = se_cmd->data_length - cmd->write_data_done;
- offset = cmd->write_data_done;
- isert_cmd->tx_desc.isert_cmd = isert_cmd;
- }
+ isert_cmd->tx_desc.isert_cmd = isert_cmd;
- sg_start = &cmd->se_cmd.t_data_sg[sg_off];
- sg_nents = se_cmd->t_data_nents - sg_off;
+ offset = wr->iser_ib_op == ISER_IB_RDMA_READ ? cmd->write_data_done : 0;
+ ret = isert_map_data_buf(isert_conn, isert_cmd, se_cmd->t_data_sg,
+ se_cmd->t_data_nents, se_cmd->data_length,
+ offset, wr->iser_ib_op, &wr->data);
+ if (ret)
+ return ret;
- count = ib_dma_map_sg(ib_dev, sg_start, sg_nents,
- (wr->iser_ib_op == ISER_IB_RDMA_WRITE) ?
- DMA_TO_DEVICE : DMA_FROM_DEVICE);
- if (unlikely(!count)) {
- pr_err("Cmd: %p unrable to map SGs\n", isert_cmd);
- return -EINVAL;
- }
- wr->sge = sg_start;
- wr->num_sge = sg_nents;
- wr->cur_rdma_length = data_left;
- pr_debug("Mapped cmd: %p count: %u sg: %p sg_nents: %u rdma_len %d\n",
- isert_cmd, count, sg_start, sg_nents, data_left);
+ data_left = data->len;
+ offset = data->offset;
- ib_sge = kzalloc(sizeof(struct ib_sge) * sg_nents, GFP_KERNEL);
+ ib_sge = kzalloc(sizeof(struct ib_sge) * data->nents, GFP_KERNEL);
if (!ib_sge) {
pr_warn("Unable to allocate ib_sge\n");
ret = -ENOMEM;
- goto unmap_sg;
+ goto unmap_cmd;
}
wr->ib_sge = ib_sge;
- wr->send_wr_num = DIV_ROUND_UP(sg_nents, isert_conn->max_sge);
+ wr->send_wr_num = DIV_ROUND_UP(data->nents, isert_conn->max_sge);
wr->send_wr = kzalloc(sizeof(struct ib_send_wr) * wr->send_wr_num,
GFP_KERNEL);
if (!wr->send_wr) {
pr_debug("Unable to allocate wr->send_wr\n");
ret = -ENOMEM;
- goto unmap_sg;
+ goto unmap_cmd;
}
wr->isert_cmd = isert_cmd;
}
return 0;
-unmap_sg:
- ib_dma_unmap_sg(ib_dev, sg_start, sg_nents,
- (wr->iser_ib_op == ISER_IB_RDMA_WRITE) ?
- DMA_TO_DEVICE : DMA_FROM_DEVICE);
+unmap_cmd:
+ isert_unmap_data_buf(isert_conn, data);
+
return ret;
}
}
static int
-isert_fast_reg_mr(struct fast_reg_descriptor *fr_desc,
- struct isert_conn *isert_conn, struct scatterlist *sg_start,
- struct ib_sge *ib_sge, u32 sg_nents, u32 offset,
- unsigned int data_len)
+isert_fast_reg_mr(struct isert_conn *isert_conn,
+ struct fast_reg_descriptor *fr_desc,
+ struct isert_data_buf *mem,
+ enum isert_indicator ind,
+ struct ib_sge *sge)
{
struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
+ struct ib_mr *mr;
+ struct ib_fast_reg_page_list *frpl;
struct ib_send_wr fr_wr, inv_wr;
struct ib_send_wr *bad_wr, *wr = NULL;
int ret, pagelist_len;
u32 page_off;
u8 key;
- sg_nents = min_t(unsigned int, sg_nents, ISCSI_ISER_SG_TABLESIZE);
- page_off = offset % PAGE_SIZE;
+ if (mem->dma_nents == 1) {
+ sge->lkey = isert_conn->conn_mr->lkey;
+ sge->addr = ib_sg_dma_address(ib_dev, &mem->sg[0]);
+ sge->length = ib_sg_dma_len(ib_dev, &mem->sg[0]);
+ pr_debug("%s:%d sge: addr: 0x%llx length: %u lkey: %x\n",
+ __func__, __LINE__, sge->addr, sge->length,
+ sge->lkey);
+ return 0;
+ }
+
+ if (ind == ISERT_DATA_KEY_VALID) {
+ /* Registering data buffer */
+ mr = fr_desc->data_mr;
+ frpl = fr_desc->data_frpl;
+ } else {
+ /* Registering protection buffer */
+ mr = fr_desc->pi_ctx->prot_mr;
+ frpl = fr_desc->pi_ctx->prot_frpl;
+ }
+
+ page_off = mem->offset % PAGE_SIZE;
pr_debug("Use fr_desc %p sg_nents %d offset %u\n",
- fr_desc, sg_nents, offset);
+ fr_desc, mem->nents, mem->offset);
- pagelist_len = isert_map_fr_pagelist(ib_dev, sg_start, sg_nents,
- &fr_desc->data_frpl->page_list[0]);
+ pagelist_len = isert_map_fr_pagelist(ib_dev, mem->sg, mem->nents,
+ &frpl->page_list[0]);
- if (!fr_desc->valid) {
+ if (!(fr_desc->ind & ISERT_DATA_KEY_VALID)) {
memset(&inv_wr, 0, sizeof(inv_wr));
inv_wr.wr_id = ISER_FASTREG_LI_WRID;
inv_wr.opcode = IB_WR_LOCAL_INV;
- inv_wr.ex.invalidate_rkey = fr_desc->data_mr->rkey;
+ inv_wr.ex.invalidate_rkey = mr->rkey;
wr = &inv_wr;
/* Bump the key */
- key = (u8)(fr_desc->data_mr->rkey & 0x000000FF);
- ib_update_fast_reg_key(fr_desc->data_mr, ++key);
+ key = (u8)(mr->rkey & 0x000000FF);
+ ib_update_fast_reg_key(mr, ++key);
}
/* Prepare FASTREG WR */
memset(&fr_wr, 0, sizeof(fr_wr));
fr_wr.wr_id = ISER_FASTREG_LI_WRID;
fr_wr.opcode = IB_WR_FAST_REG_MR;
- fr_wr.wr.fast_reg.iova_start =
- fr_desc->data_frpl->page_list[0] + page_off;
- fr_wr.wr.fast_reg.page_list = fr_desc->data_frpl;
+ fr_wr.wr.fast_reg.iova_start = frpl->page_list[0] + page_off;
+ fr_wr.wr.fast_reg.page_list = frpl;
fr_wr.wr.fast_reg.page_list_len = pagelist_len;
fr_wr.wr.fast_reg.page_shift = PAGE_SHIFT;
- fr_wr.wr.fast_reg.length = data_len;
- fr_wr.wr.fast_reg.rkey = fr_desc->data_mr->rkey;
+ fr_wr.wr.fast_reg.length = mem->len;
+ fr_wr.wr.fast_reg.rkey = mr->rkey;
fr_wr.wr.fast_reg.access_flags = IB_ACCESS_LOCAL_WRITE;
if (!wr)
pr_err("fast registration failed, ret:%d\n", ret);
return ret;
}
- fr_desc->valid = false;
+ fr_desc->ind &= ~ind;
+
+ sge->lkey = mr->lkey;
+ sge->addr = frpl->page_list[0] + page_off;
+ sge->length = mem->len;
+
+ pr_debug("%s:%d sge: addr: 0x%llx length: %u lkey: %x\n",
+ __func__, __LINE__, sge->addr, sge->length,
+ sge->lkey);
+
+ return ret;
+}
+
+static inline enum ib_t10_dif_type
+se2ib_prot_type(enum target_prot_type prot_type)
+{
+ switch (prot_type) {
+ case TARGET_DIF_TYPE0_PROT:
+ return IB_T10DIF_NONE;
+ case TARGET_DIF_TYPE1_PROT:
+ return IB_T10DIF_TYPE1;
+ case TARGET_DIF_TYPE2_PROT:
+ return IB_T10DIF_TYPE2;
+ case TARGET_DIF_TYPE3_PROT:
+ return IB_T10DIF_TYPE3;
+ default:
+ return IB_T10DIF_NONE;
+ }
+}
- ib_sge->lkey = fr_desc->data_mr->lkey;
- ib_sge->addr = fr_desc->data_frpl->page_list[0] + page_off;
- ib_sge->length = data_len;
+static int
+isert_set_sig_attrs(struct se_cmd *se_cmd, struct ib_sig_attrs *sig_attrs)
+{
+ enum ib_t10_dif_type ib_prot_type = se2ib_prot_type(se_cmd->prot_type);
+
+ sig_attrs->mem.sig_type = IB_SIG_TYPE_T10_DIF;
+ sig_attrs->wire.sig_type = IB_SIG_TYPE_T10_DIF;
+ sig_attrs->mem.sig.dif.pi_interval =
+ se_cmd->se_dev->dev_attrib.block_size;
+ sig_attrs->wire.sig.dif.pi_interval =
+ se_cmd->se_dev->dev_attrib.block_size;
+
+ switch (se_cmd->prot_op) {
+ case TARGET_PROT_DIN_INSERT:
+ case TARGET_PROT_DOUT_STRIP:
+ sig_attrs->mem.sig.dif.type = IB_T10DIF_NONE;
+ sig_attrs->wire.sig.dif.type = ib_prot_type;
+ sig_attrs->wire.sig.dif.bg_type = IB_T10DIF_CRC;
+ sig_attrs->wire.sig.dif.ref_tag = se_cmd->reftag_seed;
+ break;
+ case TARGET_PROT_DOUT_INSERT:
+ case TARGET_PROT_DIN_STRIP:
+ sig_attrs->mem.sig.dif.type = ib_prot_type;
+ sig_attrs->mem.sig.dif.bg_type = IB_T10DIF_CRC;
+ sig_attrs->mem.sig.dif.ref_tag = se_cmd->reftag_seed;
+ sig_attrs->wire.sig.dif.type = IB_T10DIF_NONE;
+ break;
+ case TARGET_PROT_DIN_PASS:
+ case TARGET_PROT_DOUT_PASS:
+ sig_attrs->mem.sig.dif.type = ib_prot_type;
+ sig_attrs->mem.sig.dif.bg_type = IB_T10DIF_CRC;
+ sig_attrs->mem.sig.dif.ref_tag = se_cmd->reftag_seed;
+ sig_attrs->wire.sig.dif.type = ib_prot_type;
+ sig_attrs->wire.sig.dif.bg_type = IB_T10DIF_CRC;
+ sig_attrs->wire.sig.dif.ref_tag = se_cmd->reftag_seed;
+ break;
+ default:
+ pr_err("Unsupported PI operation %d\n", se_cmd->prot_op);
+ return -EINVAL;
+ }
- pr_debug("RDMA ib_sge: addr: 0x%16llx length: %u lkey: %08x\n",
- ib_sge->addr, ib_sge->length, ib_sge->lkey);
+ return 0;
+}
+
+static inline u8
+isert_set_prot_checks(u8 prot_checks)
+{
+ return (prot_checks & TARGET_DIF_CHECK_GUARD ? 0xc0 : 0) |
+ (prot_checks & TARGET_DIF_CHECK_REFTAG ? 0x30 : 0) |
+ (prot_checks & TARGET_DIF_CHECK_REFTAG ? 0x0f : 0);
+}
+
+static int
+isert_reg_sig_mr(struct isert_conn *isert_conn, struct se_cmd *se_cmd,
+ struct fast_reg_descriptor *fr_desc,
+ struct ib_sge *data_sge, struct ib_sge *prot_sge,
+ struct ib_sge *sig_sge)
+{
+ struct ib_send_wr sig_wr, inv_wr;
+ struct ib_send_wr *bad_wr, *wr = NULL;
+ struct pi_context *pi_ctx = fr_desc->pi_ctx;
+ struct ib_sig_attrs sig_attrs;
+ int ret;
+ u32 key;
+
+ memset(&sig_attrs, 0, sizeof(sig_attrs));
+ ret = isert_set_sig_attrs(se_cmd, &sig_attrs);
+ if (ret)
+ goto err;
+
+ sig_attrs.check_mask = isert_set_prot_checks(se_cmd->prot_checks);
+
+ if (!(fr_desc->ind & ISERT_SIG_KEY_VALID)) {
+ memset(&inv_wr, 0, sizeof(inv_wr));
+ inv_wr.opcode = IB_WR_LOCAL_INV;
+ inv_wr.wr_id = ISER_FASTREG_LI_WRID;
+ inv_wr.ex.invalidate_rkey = pi_ctx->sig_mr->rkey;
+ wr = &inv_wr;
+ /* Bump the key */
+ key = (u8)(pi_ctx->sig_mr->rkey & 0x000000FF);
+ ib_update_fast_reg_key(pi_ctx->sig_mr, ++key);
+ }
+
+ memset(&sig_wr, 0, sizeof(sig_wr));
+ sig_wr.opcode = IB_WR_REG_SIG_MR;
+ sig_wr.wr_id = ISER_FASTREG_LI_WRID;
+ sig_wr.sg_list = data_sge;
+ sig_wr.num_sge = 1;
+ sig_wr.wr.sig_handover.access_flags = IB_ACCESS_LOCAL_WRITE;
+ sig_wr.wr.sig_handover.sig_attrs = &sig_attrs;
+ sig_wr.wr.sig_handover.sig_mr = pi_ctx->sig_mr;
+ if (se_cmd->t_prot_sg)
+ sig_wr.wr.sig_handover.prot = prot_sge;
+
+ if (!wr)
+ wr = &sig_wr;
+ else
+ wr->next = &sig_wr;
+
+ ret = ib_post_send(isert_conn->conn_qp, wr, &bad_wr);
+ if (ret) {
+ pr_err("fast registration failed, ret:%d\n", ret);
+ goto err;
+ }
+ fr_desc->ind &= ~ISERT_SIG_KEY_VALID;
+
+ sig_sge->lkey = pi_ctx->sig_mr->lkey;
+ sig_sge->addr = 0;
+ sig_sge->length = se_cmd->data_length;
+ if (se_cmd->prot_op != TARGET_PROT_DIN_STRIP &&
+ se_cmd->prot_op != TARGET_PROT_DOUT_INSERT)
+ /*
+ * We have protection guards on the wire
+ * so we need to set a larget transfer
+ */
+ sig_sge->length += se_cmd->prot_length;
+ pr_debug("sig_sge: addr: 0x%llx length: %u lkey: %x\n",
+ sig_sge->addr, sig_sge->length,
+ sig_sge->lkey);
+err:
return ret;
}
{
struct se_cmd *se_cmd = &cmd->se_cmd;
struct isert_cmd *isert_cmd = iscsit_priv_cmd(cmd);
- struct isert_conn *isert_conn = (struct isert_conn *)conn->context;
- struct ib_device *ib_dev = isert_conn->conn_cm_id->device;
+ struct isert_conn *isert_conn = conn->context;
+ struct ib_sge data_sge;
struct ib_send_wr *send_wr;
- struct ib_sge *ib_sge;
- struct scatterlist *sg_start;
- struct fast_reg_descriptor *fr_desc;
- u32 sg_off = 0, sg_nents;
- u32 offset = 0, data_len, data_left, rdma_write_max;
- int ret = 0, count;
+ struct fast_reg_descriptor *fr_desc = NULL;
+ u32 offset;
+ int ret = 0;
unsigned long flags;
- if (wr->iser_ib_op == ISER_IB_RDMA_WRITE) {
- data_left = se_cmd->data_length;
- } else {
- offset = cmd->write_data_done;
- sg_off = offset / PAGE_SIZE;
- data_left = se_cmd->data_length - cmd->write_data_done;
- isert_cmd->tx_desc.isert_cmd = isert_cmd;
- }
+ isert_cmd->tx_desc.isert_cmd = isert_cmd;
- sg_start = &cmd->se_cmd.t_data_sg[sg_off];
- sg_nents = se_cmd->t_data_nents - sg_off;
+ offset = wr->iser_ib_op == ISER_IB_RDMA_READ ? cmd->write_data_done : 0;
+ ret = isert_map_data_buf(isert_conn, isert_cmd, se_cmd->t_data_sg,
+ se_cmd->t_data_nents, se_cmd->data_length,
+ offset, wr->iser_ib_op, &wr->data);
+ if (ret)
+ return ret;
- count = ib_dma_map_sg(ib_dev, sg_start, sg_nents,
- (wr->iser_ib_op == ISER_IB_RDMA_WRITE) ?
- DMA_TO_DEVICE : DMA_FROM_DEVICE);
- if (unlikely(!count)) {
- pr_err("Cmd: %p unrable to map SGs\n", isert_cmd);
- return -EINVAL;
+ if (wr->data.dma_nents != 1 ||
+ se_cmd->prot_op != TARGET_PROT_NORMAL) {
+ spin_lock_irqsave(&isert_conn->conn_lock, flags);
+ fr_desc = list_first_entry(&isert_conn->conn_fr_pool,
+ struct fast_reg_descriptor, list);
+ list_del(&fr_desc->list);
+ spin_unlock_irqrestore(&isert_conn->conn_lock, flags);
+ wr->fr_desc = fr_desc;
}
- wr->sge = sg_start;
- wr->num_sge = sg_nents;
- pr_debug("Mapped cmd: %p count: %u sg: %p sg_nents: %u rdma_len %d\n",
- isert_cmd, count, sg_start, sg_nents, data_left);
- memset(&wr->s_ib_sge, 0, sizeof(*ib_sge));
- ib_sge = &wr->s_ib_sge;
- wr->ib_sge = ib_sge;
+ ret = isert_fast_reg_mr(isert_conn, fr_desc, &wr->data,
+ ISERT_DATA_KEY_VALID, &data_sge);
+ if (ret)
+ goto unmap_cmd;
+
+ if (se_cmd->prot_op != TARGET_PROT_NORMAL) {
+ struct ib_sge prot_sge, sig_sge;
+
+ if (se_cmd->t_prot_sg) {
+ ret = isert_map_data_buf(isert_conn, isert_cmd,
+ se_cmd->t_prot_sg,
+ se_cmd->t_prot_nents,
+ se_cmd->prot_length,
+ 0, wr->iser_ib_op, &wr->prot);
+ if (ret)
+ goto unmap_cmd;
+
+ ret = isert_fast_reg_mr(isert_conn, fr_desc, &wr->prot,
+ ISERT_PROT_KEY_VALID, &prot_sge);
+ if (ret)
+ goto unmap_prot_cmd;
+ }
+
+ ret = isert_reg_sig_mr(isert_conn, se_cmd, fr_desc,
+ &data_sge, &prot_sge, &sig_sge);
+ if (ret)
+ goto unmap_prot_cmd;
+ fr_desc->ind |= ISERT_PROTECTED;
+ memcpy(&wr->s_ib_sge, &sig_sge, sizeof(sig_sge));
+ } else
+ memcpy(&wr->s_ib_sge, &data_sge, sizeof(data_sge));
+
+ wr->ib_sge = &wr->s_ib_sge;
wr->send_wr_num = 1;
memset(&wr->s_send_wr, 0, sizeof(*send_wr));
wr->send_wr = &wr->s_send_wr;
-
wr->isert_cmd = isert_cmd;
- rdma_write_max = ISCSI_ISER_SG_TABLESIZE * PAGE_SIZE;
send_wr = &isert_cmd->rdma_wr.s_send_wr;
- send_wr->sg_list = ib_sge;
+ send_wr->sg_list = &wr->s_ib_sge;
send_wr->num_sge = 1;
send_wr->wr_id = (unsigned long)&isert_cmd->tx_desc;
if (wr->iser_ib_op == ISER_IB_RDMA_WRITE) {
send_wr->opcode = IB_WR_RDMA_WRITE;
send_wr->wr.rdma.remote_addr = isert_cmd->read_va;
send_wr->wr.rdma.rkey = isert_cmd->read_stag;
- send_wr->send_flags = 0;
- send_wr->next = &isert_cmd->tx_desc.send_wr;
+ send_wr->send_flags = se_cmd->prot_op == TARGET_PROT_NORMAL ?
+ 0 : IB_SEND_SIGNALED;
} else {
send_wr->opcode = IB_WR_RDMA_READ;
send_wr->wr.rdma.remote_addr = isert_cmd->write_va;
send_wr->send_flags = IB_SEND_SIGNALED;
}
- data_len = min(data_left, rdma_write_max);
- wr->cur_rdma_length = data_len;
-
- /* if there is a single dma entry, dma mr is sufficient */
- if (count == 1) {
- ib_sge->addr = ib_sg_dma_address(ib_dev, &sg_start[0]);
- ib_sge->length = ib_sg_dma_len(ib_dev, &sg_start[0]);
- ib_sge->lkey = isert_conn->conn_mr->lkey;
- wr->fr_desc = NULL;
- } else {
+ return 0;
+unmap_prot_cmd:
+ if (se_cmd->t_prot_sg)
+ isert_unmap_data_buf(isert_conn, &wr->prot);
+unmap_cmd:
+ if (fr_desc) {
spin_lock_irqsave(&isert_conn->conn_lock, flags);
- fr_desc = list_first_entry(&isert_conn->conn_fr_pool,
- struct fast_reg_descriptor, list);
- list_del(&fr_desc->list);
+ list_add_tail(&fr_desc->list, &isert_conn->conn_fr_pool);
spin_unlock_irqrestore(&isert_conn->conn_lock, flags);
- wr->fr_desc = fr_desc;
-
- ret = isert_fast_reg_mr(fr_desc, isert_conn, sg_start,
- ib_sge, sg_nents, offset, data_len);
- if (ret) {
- list_add_tail(&fr_desc->list, &isert_conn->conn_fr_pool);
- goto unmap_sg;
- }
}
+ isert_unmap_data_buf(isert_conn, &wr->data);
- return 0;
-
-unmap_sg:
- ib_dma_unmap_sg(ib_dev, sg_start, sg_nents,
- (wr->iser_ib_op == ISER_IB_RDMA_WRITE) ?
- DMA_TO_DEVICE : DMA_FROM_DEVICE);
return ret;
}
return rc;
}
- /*
- * Build isert_conn->tx_desc for iSCSI response PDU and attach
- */
- isert_create_send_desc(isert_conn, isert_cmd, &isert_cmd->tx_desc);
- iscsit_build_rsp_pdu(cmd, conn, true, (struct iscsi_scsi_rsp *)
- &isert_cmd->tx_desc.iscsi_header);
- isert_init_tx_hdrs(isert_conn, &isert_cmd->tx_desc);
- isert_init_send_wr(isert_conn, isert_cmd,
- &isert_cmd->tx_desc.send_wr, true);
+ if (se_cmd->prot_op == TARGET_PROT_NORMAL) {
+ /*
+ * Build isert_conn->tx_desc for iSCSI response PDU and attach
+ */
+ isert_create_send_desc(isert_conn, isert_cmd,
+ &isert_cmd->tx_desc);
+ iscsit_build_rsp_pdu(cmd, conn, true, (struct iscsi_scsi_rsp *)
+ &isert_cmd->tx_desc.iscsi_header);
+ isert_init_tx_hdrs(isert_conn, &isert_cmd->tx_desc);
+ isert_init_send_wr(isert_conn, isert_cmd,
+ &isert_cmd->tx_desc.send_wr, true);
+ isert_cmd->rdma_wr.s_send_wr.next = &isert_cmd->tx_desc.send_wr;
+ wr->send_wr_num += 1;
+ }
- atomic_add(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
+ atomic_add(wr->send_wr_num, &isert_conn->post_send_buf_count);
rc = ib_post_send(isert_conn->conn_qp, wr->send_wr, &wr_failed);
if (rc) {
pr_warn("ib_post_send() failed for IB_WR_RDMA_WRITE\n");
- atomic_sub(wr->send_wr_num + 1, &isert_conn->post_send_buf_count);
+ atomic_sub(wr->send_wr_num, &isert_conn->post_send_buf_count);
}
- pr_debug("Cmd: %p posted RDMA_WRITE + Response for iSER Data READ\n",
- isert_cmd);
+
+ if (se_cmd->prot_op == TARGET_PROT_NORMAL)
+ pr_debug("Cmd: %p posted RDMA_WRITE + Response for iSER Data "
+ "READ\n", isert_cmd);
+ else
+ pr_debug("Cmd: %p posted RDMA_WRITE for iSER Data READ\n",
+ isert_cmd);
return 1;
}
.iscsit_get_dataout = isert_get_dataout,
.iscsit_queue_data_in = isert_put_datain,
.iscsit_queue_status = isert_put_response,
+ .iscsit_aborted_task = isert_aborted_task,
+ .iscsit_get_sup_prot_ops = isert_get_sup_prot_ops,
};
static int __init isert_init(void)
struct ib_send_wr send_wr;
} __packed;
+enum isert_indicator {
+ ISERT_PROTECTED = 1 << 0,
+ ISERT_DATA_KEY_VALID = 1 << 1,
+ ISERT_PROT_KEY_VALID = 1 << 2,
+ ISERT_SIG_KEY_VALID = 1 << 3,
+};
+
+struct pi_context {
+ struct ib_mr *prot_mr;
+ struct ib_fast_reg_page_list *prot_frpl;
+ struct ib_mr *sig_mr;
+};
+
struct fast_reg_descriptor {
- struct list_head list;
- struct ib_mr *data_mr;
- struct ib_fast_reg_page_list *data_frpl;
- bool valid;
+ struct list_head list;
+ struct ib_mr *data_mr;
+ struct ib_fast_reg_page_list *data_frpl;
+ u8 ind;
+ struct pi_context *pi_ctx;
+};
+
+struct isert_data_buf {
+ struct scatterlist *sg;
+ int nents;
+ u32 sg_off;
+ u32 len; /* cur_rdma_length */
+ u32 offset;
+ unsigned int dma_nents;
+ enum dma_data_direction dma_dir;
};
struct isert_rdma_wr {
enum iser_ib_op_code iser_ib_op;
struct ib_sge *ib_sge;
struct ib_sge s_ib_sge;
- int num_sge;
- struct scatterlist *sge;
int send_wr_num;
struct ib_send_wr *send_wr;
struct ib_send_wr s_send_wr;
- u32 cur_rdma_length;
+ struct isert_data_buf data;
+ struct isert_data_buf prot;
struct fast_reg_descriptor *fr_desc;
};
struct isert_device {
int use_fastreg;
+ bool pi_capable;
int cqs_used;
int refcount;
int cq_active_qps[ISERT_MAX_CQ];
static int srpt_map_sg_to_ib_sge(struct srpt_rdma_ch *ch,
struct srpt_send_ioctx *ioctx)
{
+ struct ib_device *dev = ch->sport->sdev->device;
struct se_cmd *cmd;
struct scatterlist *sg, *sg_orig;
int sg_cnt;
db = ioctx->rbufs;
tsize = cmd->data_length;
- dma_len = sg_dma_len(&sg[0]);
+ dma_len = ib_sg_dma_len(dev, &sg[0]);
riu = ioctx->rdma_ius;
/*
++j;
if (j < count) {
sg = sg_next(sg);
- dma_len = sg_dma_len(sg);
+ dma_len = ib_sg_dma_len(
+ dev, sg);
}
}
} else {
tsize = cmd->data_length;
riu = ioctx->rdma_ius;
sg = sg_orig;
- dma_len = sg_dma_len(&sg[0]);
- dma_addr = sg_dma_address(&sg[0]);
+ dma_len = ib_sg_dma_len(dev, &sg[0]);
+ dma_addr = ib_sg_dma_address(dev, &sg[0]);
/* this second loop is really mapped sg_addres to rdma_iu->ib_sge */
for (i = 0, j = 0;
++j;
if (j < count) {
sg = sg_next(sg);
- dma_len = sg_dma_len(sg);
- dma_addr = sg_dma_address(sg);
+ dma_len = ib_sg_dma_len(
+ dev, sg);
+ dma_addr = ib_sg_dma_address(
+ dev, sg);
}
}
} else {
goto destroy_ib;
}
- ch->sess = transport_init_session();
+ ch->sess = transport_init_session(TARGET_PROT_NORMAL);
if (IS_ERR(ch->sess)) {
rej->reason = __constant_cpu_to_be32(
SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES);
srpt_queue_response(cmd);
}
+static void srpt_aborted_task(struct se_cmd *cmd)
+{
+ struct srpt_send_ioctx *ioctx = container_of(cmd,
+ struct srpt_send_ioctx, cmd);
+
+ srpt_unmap_sg_to_ib_sge(ioctx->ch, ioctx);
+}
+
static int srpt_queue_status(struct se_cmd *cmd)
{
struct srpt_send_ioctx *ioctx;
.queue_data_in = srpt_queue_data_in,
.queue_status = srpt_queue_status,
.queue_tm_rsp = srpt_queue_tm_rsp,
+ .aborted_task = srpt_aborted_task,
/*
* Setup function pointers for generic logic in
* target_core_fabric_configfs.c
depends on MFD_MC13XXX
help
This option enable support for on-chip LED drivers found
- on Freescale Semiconductor MC13783/MC13892 PMIC.
+ on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
config LEDS_OT200
tristate "LED support for the Bachmann OT200"
- depends on LEDS_CLASS && HAS_IOMEM
+ depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
help
This option enables support for the LEDs on the Bachmann OT200.
Say Y to enable LEDs on the Bachmann OT200.
led_cdev->blink_delay_on = delay_on;
led_cdev->blink_delay_off = delay_off;
- /* never on - don't blink */
- if (!delay_on)
+ /* never on - just set to off */
+ if (!delay_on) {
+ __led_set_brightness(led_cdev, LED_OFF);
return;
+ }
/* never off - just set to brightness */
if (!delay_off) {
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/device.h>
{
struct led_classdev *led_cdev;
+ if (list_empty_careful(&trig->next_trig))
+ return;
+
/* Remove from the list of led triggers */
down_write(&triggers_list_lock);
- list_del(&trig->next_trig);
+ list_del_init(&trig->next_trig);
up_write(&triggers_list_lock);
/* Remove anyone actively using this trigger */
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/slab.h>
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
{
int ret;
struct blinkm_led *led;
- struct blinkm_data *data ;
+ struct blinkm_data *data;
struct blinkm_work *blm_work = work_to_blmwork(work);
led = blm_work->blinkm_led;
MODULE_DESCRIPTION("Clevo mail LED driver");
MODULE_LICENSE("GPL");
-static bool __initdata nodetect;
+static bool nodetect;
module_param_named(nodetect, nodetect, bool, 0);
MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
.flags = LED_CORE_SUSPENDRESUME,
};
-static int clevo_mail_led_probe(struct platform_device *pdev)
+static int __init clevo_mail_led_probe(struct platform_device *pdev)
{
return led_classdev_register(&pdev->dev, &clevo_mail_led);
}
}
static struct platform_driver clevo_mail_led_driver = {
- .probe = clevo_mail_led_probe,
.remove = clevo_mail_led_remove,
.driver = {
.name = KBUILD_MODNAME,
*
* Control the Cobalt Qube/RaQ front LED
*/
-#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/module.h>
*
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
led.default_state = LEDS_GPIO_DEFSTATE_OFF;
}
+ if (of_get_property(child, "retain-state-suspended", NULL))
+ led.retain_state_suspended = 1;
+
ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
&pdev->dev, NULL);
if (ret < 0) {
{ .compatible = "gpio-leds", },
{},
};
+
+MODULE_DEVICE_TABLE(of, of_gpio_leds_match);
#else /* CONFIG_OF_GPIO */
static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
{
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <asm/hd64461.h>
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/leds.h>
#include <linux/mfd/core.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
-#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
/* check the size of program count */
static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
{
- return (ptn->size_r >= LP5562_PROGRAM_LENGTH ||
- ptn->size_g >= LP5562_PROGRAM_LENGTH ||
- ptn->size_b >= LP5562_PROGRAM_LENGTH);
+ return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
+ ptn->size_g >= LP5562_PROGRAM_LENGTH ||
+ ptn->size_b >= LP5562_PROGRAM_LENGTH;
}
static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/workqueue.h>
/*
- * LEDs driver for Freescale MC13783/MC13892
+ * LEDs driver for Freescale MC13783/MC13892/MC34708
*
* Copyright (C) 2010 Philippe Rétornaz
*
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/of.h>
#include <linux/workqueue.h>
#include <linux/mfd/mc13xxx.h>
-#define MC13XXX_REG_LED_CONTROL(x) (51 + (x))
-
struct mc13xxx_led_devtype {
int led_min;
int led_max;
int num_regs;
+ u32 ledctrl_base;
};
struct mc13xxx_led {
struct led_classdev cdev;
struct work_struct work;
- struct mc13xxx *master;
enum led_brightness new_brightness;
int id;
+ struct mc13xxx_leds *leds;
};
struct mc13xxx_leds {
+ struct mc13xxx *master;
struct mc13xxx_led_devtype *devtype;
int num_leds;
- struct mc13xxx_led led[0];
+ struct mc13xxx_led *led;
};
+static unsigned int mc13xxx_max_brightness(int id)
+{
+ if (id >= MC13783_LED_MD && id <= MC13783_LED_KP)
+ return 0x0f;
+ else if (id >= MC13783_LED_R1 && id <= MC13783_LED_B3)
+ return 0x1f;
+
+ return 0x3f;
+}
+
static void mc13xxx_led_work(struct work_struct *work)
{
struct mc13xxx_led *led = container_of(work, struct mc13xxx_led, work);
- int reg, mask, value, bank, off, shift;
+ struct mc13xxx_leds *leds = led->leds;
+ unsigned int reg, bank, off, shift;
switch (led->id) {
case MC13783_LED_MD:
- reg = MC13XXX_REG_LED_CONTROL(2);
- shift = 9;
- mask = 0x0f;
- value = led->new_brightness >> 4;
- break;
case MC13783_LED_AD:
- reg = MC13XXX_REG_LED_CONTROL(2);
- shift = 13;
- mask = 0x0f;
- value = led->new_brightness >> 4;
- break;
case MC13783_LED_KP:
- reg = MC13XXX_REG_LED_CONTROL(2);
- shift = 17;
- mask = 0x0f;
- value = led->new_brightness >> 4;
+ reg = 2;
+ shift = 9 + (led->id - MC13783_LED_MD) * 4;
break;
case MC13783_LED_R1:
case MC13783_LED_G1:
case MC13783_LED_B3:
off = led->id - MC13783_LED_R1;
bank = off / 3;
- reg = MC13XXX_REG_LED_CONTROL(3) + bank;
+ reg = 3 + bank;
shift = (off - bank * 3) * 5 + 6;
- value = led->new_brightness >> 3;
- mask = 0x1f;
break;
case MC13892_LED_MD:
- reg = MC13XXX_REG_LED_CONTROL(0);
- shift = 3;
- mask = 0x3f;
- value = led->new_brightness >> 2;
- break;
case MC13892_LED_AD:
- reg = MC13XXX_REG_LED_CONTROL(0);
- shift = 15;
- mask = 0x3f;
- value = led->new_brightness >> 2;
- break;
case MC13892_LED_KP:
- reg = MC13XXX_REG_LED_CONTROL(1);
- shift = 3;
- mask = 0x3f;
- value = led->new_brightness >> 2;
+ reg = (led->id - MC13892_LED_MD) / 2;
+ shift = 3 + (led->id - MC13892_LED_MD) * 12;
break;
case MC13892_LED_R:
case MC13892_LED_G:
case MC13892_LED_B:
off = led->id - MC13892_LED_R;
bank = off / 2;
- reg = MC13XXX_REG_LED_CONTROL(2) + bank;
+ reg = 2 + bank;
shift = (off - bank * 2) * 12 + 3;
- value = led->new_brightness >> 2;
- mask = 0x3f;
+ break;
+ case MC34708_LED_R:
+ case MC34708_LED_G:
+ reg = 0;
+ shift = 3 + (led->id - MC34708_LED_R) * 12;
break;
default:
BUG();
}
- mc13xxx_reg_rmw(led->master, reg, mask << shift, value << shift);
+ mc13xxx_reg_rmw(leds->master, leds->devtype->ledctrl_base + reg,
+ mc13xxx_max_brightness(led->id) << shift,
+ led->new_brightness << shift);
}
static void mc13xxx_led_set(struct led_classdev *led_cdev,
schedule_work(&led->work);
}
-static int __init mc13xxx_led_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static struct mc13xxx_leds_platform_data __init *mc13xxx_led_probe_dt(
+ struct platform_device *pdev)
{
- struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent);
- struct mc13xxx_led_devtype *devtype =
- (struct mc13xxx_led_devtype *)pdev->id_entry->driver_data;
- struct mc13xxx_leds *leds;
- int i, id, num_leds, ret = -ENODATA;
- u32 reg, init_led = 0;
+ struct mc13xxx_leds *leds = platform_get_drvdata(pdev);
+ struct mc13xxx_leds_platform_data *pdata;
+ struct device_node *parent, *child;
+ struct device *dev = &pdev->dev;
+ int i = 0, ret = -ENODATA;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ of_node_get(dev->parent->of_node);
+
+ parent = of_find_node_by_name(dev->parent->of_node, "leds");
+ if (!parent)
+ goto out_node_put;
- if (!pdata) {
- dev_err(&pdev->dev, "Missing platform data\n");
- return -ENODEV;
+ ret = of_property_read_u32_array(parent, "led-control",
+ pdata->led_control,
+ leds->devtype->num_regs);
+ if (ret)
+ goto out_node_put;
+
+ pdata->num_leds = of_get_child_count(parent);
+
+ pdata->led = devm_kzalloc(dev, pdata->num_leds * sizeof(*pdata->led),
+ GFP_KERNEL);
+ if (!pdata->led) {
+ ret = -ENOMEM;
+ goto out_node_put;
}
- num_leds = pdata->num_leds;
+ for_each_child_of_node(parent, child) {
+ const char *str;
+ u32 tmp;
- if ((num_leds < 1) ||
- (num_leds > (devtype->led_max - devtype->led_min + 1))) {
- dev_err(&pdev->dev, "Invalid LED count %d\n", num_leds);
- return -EINVAL;
+ if (of_property_read_u32(child, "reg", &tmp))
+ continue;
+ pdata->led[i].id = leds->devtype->led_min + tmp;
+
+ if (!of_property_read_string(child, "label", &str))
+ pdata->led[i].name = str;
+ if (!of_property_read_string(child, "linux,default-trigger",
+ &str))
+ pdata->led[i].default_trigger = str;
+
+ i++;
}
- leds = devm_kzalloc(&pdev->dev, num_leds * sizeof(struct mc13xxx_led) +
- sizeof(struct mc13xxx_leds), GFP_KERNEL);
+ pdata->num_leds = i;
+ ret = i > 0 ? 0 : -ENODATA;
+
+out_node_put:
+ of_node_put(parent);
+
+ return ret ? ERR_PTR(ret) : pdata;
+}
+#else
+static inline struct mc13xxx_leds_platform_data __init *mc13xxx_led_probe_dt(
+ struct platform_device *pdev)
+{
+ return ERR_PTR(-ENOSYS);
+}
+#endif
+
+static int __init mc13xxx_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mc13xxx_leds_platform_data *pdata = dev_get_platdata(dev);
+ struct mc13xxx *mcdev = dev_get_drvdata(dev->parent);
+ struct mc13xxx_led_devtype *devtype =
+ (struct mc13xxx_led_devtype *)pdev->id_entry->driver_data;
+ struct mc13xxx_leds *leds;
+ int i, id, ret = -ENODATA;
+ u32 init_led = 0;
+
+ leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
if (!leds)
return -ENOMEM;
leds->devtype = devtype;
- leds->num_leds = num_leds;
+ leds->master = mcdev;
platform_set_drvdata(pdev, leds);
+ if (dev->parent->of_node) {
+ pdata = mc13xxx_led_probe_dt(pdev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ } else if (!pdata)
+ return -ENODATA;
+
+ leds->num_leds = pdata->num_leds;
+
+ if ((leds->num_leds < 1) ||
+ (leds->num_leds > (devtype->led_max - devtype->led_min + 1))) {
+ dev_err(dev, "Invalid LED count %d\n", leds->num_leds);
+ return -EINVAL;
+ }
+
+ leds->led = devm_kzalloc(dev, leds->num_leds * sizeof(*leds->led),
+ GFP_KERNEL);
+ if (!leds->led)
+ return -ENOMEM;
+
for (i = 0; i < devtype->num_regs; i++) {
- reg = pdata->led_control[i];
- WARN_ON(reg >= (1 << 24));
- ret = mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), reg);
+ ret = mc13xxx_reg_write(mcdev, leds->devtype->ledctrl_base + i,
+ pdata->led_control[i]);
if (ret)
return ret;
}
- for (i = 0; i < num_leds; i++) {
+ for (i = 0; i < leds->num_leds; i++) {
const char *name, *trig;
ret = -EINVAL;
trig = pdata->led[i].default_trigger;
if ((id > devtype->led_max) || (id < devtype->led_min)) {
- dev_err(&pdev->dev, "Invalid ID %i\n", id);
+ dev_err(dev, "Invalid ID %i\n", id);
break;
}
if (init_led & (1 << id)) {
- dev_warn(&pdev->dev,
- "LED %i already initialized\n", id);
+ dev_warn(dev, "LED %i already initialized\n", id);
break;
}
init_led |= 1 << id;
leds->led[i].id = id;
- leds->led[i].master = mcdev;
+ leds->led[i].leds = leds;
leds->led[i].cdev.name = name;
leds->led[i].cdev.default_trigger = trig;
+ leds->led[i].cdev.flags = LED_CORE_SUSPENDRESUME;
leds->led[i].cdev.brightness_set = mc13xxx_led_set;
- leds->led[i].cdev.brightness = LED_OFF;
+ leds->led[i].cdev.max_brightness = mc13xxx_max_brightness(id);
INIT_WORK(&leds->led[i].work, mc13xxx_led_work);
- ret = led_classdev_register(pdev->dev.parent,
- &leds->led[i].cdev);
+ ret = led_classdev_register(dev->parent, &leds->led[i].cdev);
if (ret) {
- dev_err(&pdev->dev, "Failed to register LED %i\n", id);
+ dev_err(dev, "Failed to register LED %i\n", id);
break;
}
}
static int mc13xxx_led_remove(struct platform_device *pdev)
{
- struct mc13xxx *mcdev = dev_get_drvdata(pdev->dev.parent);
struct mc13xxx_leds *leds = platform_get_drvdata(pdev);
int i;
cancel_work_sync(&leds->led[i].work);
}
- for (i = 0; i < leds->devtype->num_regs; i++)
- mc13xxx_reg_write(mcdev, MC13XXX_REG_LED_CONTROL(i), 0);
-
return 0;
}
.led_min = MC13783_LED_MD,
.led_max = MC13783_LED_B3,
.num_regs = 6,
+ .ledctrl_base = 51,
};
static const struct mc13xxx_led_devtype mc13892_led_devtype = {
.led_min = MC13892_LED_MD,
.led_max = MC13892_LED_B,
.num_regs = 4,
+ .ledctrl_base = 51,
+};
+
+static const struct mc13xxx_led_devtype mc34708_led_devtype = {
+ .led_min = MC34708_LED_R,
+ .led_max = MC34708_LED_G,
+ .num_regs = 1,
+ .ledctrl_base = 54,
};
static const struct platform_device_id mc13xxx_led_id_table[] = {
{ "mc13783-led", (kernel_ulong_t)&mc13783_led_devtype, },
{ "mc13892-led", (kernel_ulong_t)&mc13892_led_devtype, },
+ { "mc34708-led", (kernel_ulong_t)&mc34708_led_devtype, },
{ }
};
MODULE_DEVICE_TABLE(platform, mc13xxx_led_id_table);
*/
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/gpio.h>
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/fb.h>
(sizeof(struct led_pwm_data) * num_leds);
}
+static void led_pwm_cleanup(struct led_pwm_priv *priv)
+{
+ while (priv->num_leds--) {
+ led_classdev_unregister(&priv->leds[priv->num_leds].cdev);
+ if (priv->leds[priv->num_leds].can_sleep)
+ cancel_work_sync(&priv->leds[priv->num_leds].work);
+ }
+}
+
static int led_pwm_create_of(struct platform_device *pdev,
struct led_pwm_priv *priv)
{
return 0;
err:
- while (priv->num_leds--)
- led_classdev_unregister(&priv->leds[priv->num_leds].cdev);
+ led_pwm_cleanup(priv);
return ret;
}
return 0;
err:
- while (i--)
- led_classdev_unregister(&priv->leds[i].cdev);
+ priv->num_leds = i;
+ led_pwm_cleanup(priv);
return ret;
}
static int led_pwm_remove(struct platform_device *pdev)
{
struct led_pwm_priv *priv = platform_get_drvdata(pdev);
- int i;
- for (i = 0; i < priv->num_leds; i++) {
- led_classdev_unregister(&priv->leds[i].cdev);
- if (priv->leds[i].can_sleep)
- cancel_work_sync(&priv->leds[i].work);
- }
+ led_pwm_cleanup(priv);
return 0;
}
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/gpio.h>
/*
* PCI ID of the Intel ICH7 LPC Device within which the GPIO block lives.
*/
-static DEFINE_PCI_DEVICE_TABLE(ich7_lpc_pci_id) = {
+static const struct pci_device_id ich7_lpc_pci_id[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_30) },
return 1;
}
-static bool __initdata nodetect;
+static bool nodetect;
module_param_named(nodetect, nodetect, bool, 0);
MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/leds.h>
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <linux/percpu.h>
#include <linux/syscore_ops.h>
#include <linux/rwsem.h>
+#include <linux/cpu.h>
#include "../leds.h"
#define MAX_NAME_LEN 8
.resume = ledtrig_cpu_syscore_resume,
};
+static int ledtrig_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_STARTING:
+ ledtrig_cpu(CPU_LED_START);
+ break;
+ case CPU_DYING:
+ ledtrig_cpu(CPU_LED_STOP);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+
+static struct notifier_block ledtrig_cpu_nb = {
+ .notifier_call = ledtrig_cpu_notify,
+};
+
static int __init ledtrig_cpu_init(void)
{
int cpu;
}
register_syscore_ops(&ledtrig_cpu_syscore_ops);
+ register_cpu_notifier(&ledtrig_cpu_nb);
pr_info("ledtrig-cpu: registered to indicate activity on CPUs\n");
{
int cpu;
+ unregister_cpu_notifier(&ledtrig_cpu_nb);
+
for_each_possible_cpu(cpu) {
struct led_trigger_cpu *trig = &per_cpu(cpu_trig, cpu);
if (mddev->bitmap_info.file) {
struct file *f = mddev->bitmap_info.file;
mddev->bitmap_info.file = NULL;
- restore_bitmap_write_access(f);
fput(f);
}
} else {
return 0;
}
-/* similar to deny_write_access, but accounts for our holding a reference
- * to the file ourselves */
-static int deny_bitmap_write_access(struct file * file)
-{
- struct inode *inode = file->f_mapping->host;
-
- spin_lock(&inode->i_lock);
- if (atomic_read(&inode->i_writecount) > 1) {
- spin_unlock(&inode->i_lock);
- return -ETXTBSY;
- }
- atomic_set(&inode->i_writecount, -1);
- spin_unlock(&inode->i_lock);
-
- return 0;
-}
-
-void restore_bitmap_write_access(struct file *file)
-{
- struct inode *inode = file->f_mapping->host;
-
- spin_lock(&inode->i_lock);
- atomic_set(&inode->i_writecount, 1);
- spin_unlock(&inode->i_lock);
-}
-
static void md_clean(struct mddev *mddev)
{
mddev->array_sectors = 0;
bitmap_destroy(mddev);
if (mddev->bitmap_info.file) {
- restore_bitmap_write_access(mddev->bitmap_info.file);
fput(mddev->bitmap_info.file);
mddev->bitmap_info.file = NULL;
}
static int set_bitmap_file(struct mddev *mddev, int fd)
{
- int err;
+ int err = 0;
if (mddev->pers) {
if (!mddev->pers->quiesce)
if (fd >= 0) {
+ struct inode *inode;
if (mddev->bitmap)
return -EEXIST; /* cannot add when bitmap is present */
mddev->bitmap_info.file = fget(fd);
return -EBADF;
}
- err = deny_bitmap_write_access(mddev->bitmap_info.file);
- if (err) {
+ inode = mddev->bitmap_info.file->f_mapping->host;
+ if (!S_ISREG(inode->i_mode)) {
+ printk(KERN_ERR "%s: error: bitmap file must be a regular file\n",
+ mdname(mddev));
+ err = -EBADF;
+ } else if (!(mddev->bitmap_info.file->f_mode & FMODE_WRITE)) {
+ printk(KERN_ERR "%s: error: bitmap file must open for write\n",
+ mdname(mddev));
+ err = -EBADF;
+ } else if (atomic_read(&inode->i_writecount) != 1) {
printk(KERN_ERR "%s: error: bitmap file is already in use\n",
mdname(mddev));
+ err = -EBUSY;
+ }
+ if (err) {
fput(mddev->bitmap_info.file);
mddev->bitmap_info.file = NULL;
return err;
mddev->pers->quiesce(mddev, 0);
}
if (fd < 0) {
- if (mddev->bitmap_info.file) {
- restore_bitmap_write_access(mddev->bitmap_info.file);
+ if (mddev->bitmap_info.file)
fput(mddev->bitmap_info.file);
- }
mddev->bitmap_info.file = NULL;
}
return error;
}
+static int md_unloading;
static unsigned int mdstat_poll(struct file *filp, poll_table *wait)
{
struct seq_file *seq = filp->private_data;
int mask;
+ if (md_unloading)
+ return POLLIN|POLLRDNORM|POLLERR|POLLPRI;;
poll_wait(filp, &md_event_waiters, wait);
/* always allow read */
{
struct mddev *mddev;
struct list_head *tmp;
+ int delay = 1;
blk_unregister_region(MKDEV(MD_MAJOR,0), 1U << MINORBITS);
blk_unregister_region(MKDEV(mdp_major,0), 1U << MINORBITS);
unregister_blkdev(mdp_major, "mdp");
unregister_reboot_notifier(&md_notifier);
unregister_sysctl_table(raid_table_header);
+
+ /* We cannot unload the modules while some process is
+ * waiting for us in select() or poll() - wake them up
+ */
+ md_unloading = 1;
+ while (waitqueue_active(&md_event_waiters)) {
+ /* not safe to leave yet */
+ wake_up(&md_event_waiters);
+ msleep(delay);
+ delay += delay;
+ }
remove_proc_entry("mdstat", NULL);
+
for_each_mddev(mddev, tmp) {
export_array(mddev);
mddev->hold_active = 0;
extern int md_integrity_register(struct mddev *mddev);
extern void md_integrity_add_rdev(struct md_rdev *rdev, struct mddev *mddev);
extern int strict_strtoul_scaled(const char *cp, unsigned long *res, int scale);
-extern void restore_bitmap_write_access(struct file *file);
extern void mddev_init(struct mddev *mddev);
extern int md_run(struct mddev *mddev);
struct pool_info *pi = data;
struct r1bio *r1_bio;
struct bio *bio;
+ int need_pages;
int i, j;
r1_bio = r1bio_pool_alloc(gfp_flags, pi);
* RESYNC_PAGES for each bio.
*/
if (test_bit(MD_RECOVERY_REQUESTED, &pi->mddev->recovery))
- j = pi->raid_disks;
+ need_pages = pi->raid_disks;
else
- j = 1;
- while(j--) {
+ need_pages = 1;
+ for (j = 0; j < need_pages; j++) {
bio = r1_bio->bios[j];
bio->bi_vcnt = RESYNC_PAGES;
if (bio_alloc_pages(bio, gfp_flags))
- goto out_free_bio;
+ goto out_free_pages;
}
/* If not user-requests, copy the page pointers to all bios */
if (!test_bit(MD_RECOVERY_REQUESTED, &pi->mddev->recovery)) {
return r1_bio;
+out_free_pages:
+ while (--j >= 0) {
+ struct bio_vec *bv;
+
+ bio_for_each_segment_all(bv, r1_bio->bios[j], i)
+ __free_page(bv->bv_page);
+ }
+
out_free_bio:
while (++j < pi->raid_disks)
bio_put(r1_bio->bios[j]);
init_stripe(sh, sector, previous);
atomic_inc(&sh->count);
}
- } else {
+ } else if (!atomic_inc_not_zero(&sh->count)) {
spin_lock(&conf->device_lock);
- if (atomic_read(&sh->count)) {
- BUG_ON(!list_empty(&sh->lru)
- && !test_bit(STRIPE_EXPANDING, &sh->state)
- && !test_bit(STRIPE_ON_UNPLUG_LIST, &sh->state)
- );
- } else {
+ if (!atomic_read(&sh->count)) {
if (!test_bit(STRIPE_HANDLE, &sh->state))
atomic_inc(&conf->active_stripes);
BUG_ON(list_empty(&sh->lru) &&
struct stripe_head *sh;
const int rw = bio_data_dir(bi);
int remaining;
+ DEFINE_WAIT(w);
+ bool do_prepare;
if (unlikely(bi->bi_rw & REQ_FLUSH)) {
md_flush_request(mddev, bi);
bi->bi_next = NULL;
bi->bi_phys_segments = 1; /* over-loaded to count active stripes */
+ prepare_to_wait(&conf->wait_for_overlap, &w, TASK_UNINTERRUPTIBLE);
for (;logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
- DEFINE_WAIT(w);
int previous;
int seq;
+ do_prepare = false;
retry:
seq = read_seqcount_begin(&conf->gen_lock);
previous = 0;
- prepare_to_wait(&conf->wait_for_overlap, &w, TASK_UNINTERRUPTIBLE);
+ if (do_prepare)
+ prepare_to_wait(&conf->wait_for_overlap, &w,
+ TASK_UNINTERRUPTIBLE);
if (unlikely(conf->reshape_progress != MaxSector)) {
/* spinlock is needed as reshape_progress may be
* 64bit on a 32bit platform, and so it might be
: logical_sector >= conf->reshape_safe) {
spin_unlock_irq(&conf->device_lock);
schedule();
+ do_prepare = true;
goto retry;
}
}
if (must_retry) {
release_stripe(sh);
schedule();
+ do_prepare = true;
goto retry;
}
}
prepare_to_wait(&conf->wait_for_overlap,
&w, TASK_INTERRUPTIBLE);
if (logical_sector >= mddev->suspend_lo &&
- logical_sector < mddev->suspend_hi)
+ logical_sector < mddev->suspend_hi) {
schedule();
+ do_prepare = true;
+ }
goto retry;
}
md_wakeup_thread(mddev->thread);
release_stripe(sh);
schedule();
+ do_prepare = true;
goto retry;
}
- finish_wait(&conf->wait_for_overlap, &w);
set_bit(STRIPE_HANDLE, &sh->state);
clear_bit(STRIPE_DELAYED, &sh->state);
if ((bi->bi_rw & REQ_SYNC) &&
} else {
/* cannot get stripe for read-ahead, just give-up */
clear_bit(BIO_UPTODATE, &bi->bi_flags);
- finish_wait(&conf->wait_for_overlap, &w);
break;
}
}
+ finish_wait(&conf->wait_for_overlap, &w);
remaining = raid5_dec_bi_active_stripes(bi);
if (remaining == 0) {
config DVB_DRX39XYJ
tristate "Micronas DRX-J demodulator"
depends on DVB_CORE && I2C
- default m if DVB_FE_CUSTOMISE
+ default m if !MEDIA_SUBDRV_AUTOSELECT
help
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
to support this frontend.
},
.i2c_gate_ctrl = lgdt3305_i2c_gate_ctrl,
.init = lgdt3305_init,
+ .sleep = lgdt3305_sleep,
.set_frontend = lgdt3304_set_parameters,
.get_frontend = lgdt3305_get_frontend,
.get_tune_settings = lgdt3305_get_tune_settings,
u8 val;
};
-struct inittab m88rs2000_setup[] = {
+static struct inittab m88rs2000_setup[] = {
{DEMOD_WRITE, 0x9a, 0x30},
{DEMOD_WRITE, 0x00, 0x01},
{WRITE_DELAY, 0x19, 0x00},
{0xff, 0xaa, 0xff}
};
-struct inittab m88rs2000_shutdown[] = {
+static struct inittab m88rs2000_shutdown[] = {
{DEMOD_WRITE, 0x9a, 0x30},
{DEMOD_WRITE, 0xb0, 0x00},
{DEMOD_WRITE, 0xf1, 0x89},
{0xff, 0xaa, 0xff}
};
-struct inittab fe_reset[] = {
+static struct inittab fe_reset[] = {
{DEMOD_WRITE, 0x00, 0x01},
{DEMOD_WRITE, 0x20, 0x81},
{DEMOD_WRITE, 0x21, 0x80},
{0xff, 0xaa, 0xff}
};
-struct inittab fe_trigger[] = {
+static struct inittab fe_trigger[] = {
{DEMOD_WRITE, 0x97, 0x04},
{DEMOD_WRITE, 0x99, 0x77},
{DEMOD_WRITE, 0x9b, 0x64},
#define VPE_MODULE_NAME "vpe"
/* minimum and maximum frame sizes */
-#define MIN_W 128
-#define MIN_H 128
+#define MIN_W 32
+#define MIN_H 32
#define MAX_W 1920
#define MAX_H 1080
if (v4l2_m2m_num_src_bufs_ready(ctx->m2m_ctx) < needed)
return 0;
+ if (v4l2_m2m_num_dst_bufs_ready(ctx->m2m_ctx) < needed)
+ return 0;
+
return 1;
}
s_buf = &s_vb->v4l2_buf;
d_buf = &d_vb->v4l2_buf;
+ d_buf->flags = s_buf->flags;
+
d_buf->timestamp = s_buf->timestamp;
- d_buf->flags &= ~V4L2_BUF_FLAG_TSTAMP_SRC_MASK;
- d_buf->flags |= s_buf->flags & V4L2_BUF_FLAG_TSTAMP_SRC_MASK;
- if (s_buf->flags & V4L2_BUF_FLAG_TIMECODE) {
- d_buf->flags |= V4L2_BUF_FLAG_TIMECODE;
+ if (s_buf->flags & V4L2_BUF_FLAG_TIMECODE)
d_buf->timecode = s_buf->timecode;
- }
+
d_buf->sequence = ctx->sequence;
- d_buf->field = ctx->field;
d_q_data = &ctx->q_data[Q_DATA_DST];
if (d_q_data->flags & Q_DATA_INTERLACED) {
+ d_buf->field = ctx->field;
if (ctx->field == V4L2_FIELD_BOTTOM) {
ctx->sequence++;
ctx->field = V4L2_FIELD_TOP;
ctx->field = V4L2_FIELD_BOTTOM;
}
} else {
+ d_buf->field = V4L2_FIELD_NONE;
ctx->sequence++;
}
{
strncpy(cap->driver, VPE_MODULE_NAME, sizeof(cap->driver) - 1);
strncpy(cap->card, VPE_MODULE_NAME, sizeof(cap->card) - 1);
- strlcpy(cap->bus_info, VPE_MODULE_NAME, sizeof(cap->bus_info));
- cap->device_caps = V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING;
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ VPE_MODULE_NAME);
+ cap->device_caps = V4L2_CAP_VIDEO_M2M_MPLANE | V4L2_CAP_STREAMING;
cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
return 0;
}
}
}
+ memset(pix->reserved, 0, sizeof(pix->reserved));
for (i = 0; i < pix->num_planes; i++) {
plane_fmt = &pix->plane_fmt[i];
depth = fmt->vpdma_fmt[i]->depth;
plane_fmt->sizeimage =
(pix->height * pix->width * depth) >> 3;
+
+ memset(plane_fmt->reserved, 0, sizeof(plane_fmt->reserved));
}
return 0;
q_data = get_q_data(ctx, vb->vb2_queue->type);
num_planes = q_data->fmt->coplanar ? 2 : 1;
+ if (vb->vb2_queue->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ if (!(q_data->flags & Q_DATA_INTERLACED)) {
+ vb->v4l2_buf.field = V4L2_FIELD_NONE;
+ } else {
+ if (vb->v4l2_buf.field != V4L2_FIELD_TOP &&
+ vb->v4l2_buf.field != V4L2_FIELD_BOTTOM)
+ return -EINVAL;
+ }
+ }
+
for (i = 0; i < num_planes; i++) {
if (vb2_plane_size(vb, i) < q_data->sizeimage[i]) {
vpe_err(ctx->dev,
s_q_data->fmt = &vpe_formats[2];
s_q_data->width = 1920;
s_q_data->height = 1080;
- s_q_data->sizeimage[VPE_LUMA] = (s_q_data->width * s_q_data->height *
+ s_q_data->bytesperline[VPE_LUMA] = (s_q_data->width *
s_q_data->fmt->vpdma_fmt[VPE_LUMA]->depth) >> 3;
- s_q_data->colorspace = V4L2_COLORSPACE_SMPTE170M;
+ s_q_data->sizeimage[VPE_LUMA] = (s_q_data->bytesperline[VPE_LUMA] *
+ s_q_data->height);
+ s_q_data->colorspace = V4L2_COLORSPACE_REC709;
s_q_data->field = V4L2_FIELD_NONE;
s_q_data->c_rect.left = 0;
s_q_data->c_rect.top = 0;
.fops = &vpe_fops,
.ioctl_ops = &vpe_ioctl_ops,
.minor = -1,
- .release = video_device_release,
+ .release = video_device_release_empty,
.vfl_dir = VFL_DIR_M2M,
};
return ret;
}
+static int img_ir_set_normal_filter(struct rc_dev *dev,
+ struct rc_scancode_filter *sc_filter)
+{
+ return img_ir_set_filter(dev, RC_FILTER_NORMAL, sc_filter);
+}
+
+static int img_ir_set_wakeup_filter(struct rc_dev *dev,
+ struct rc_scancode_filter *sc_filter)
+{
+ return img_ir_set_filter(dev, RC_FILTER_WAKEUP, sc_filter);
+}
+
/**
* img_ir_set_decoder() - Set the current decoder.
* @priv: IR private data.
rdev->map_name = RC_MAP_EMPTY;
rc_set_allowed_protocols(rdev, img_ir_allowed_protos(priv));
rdev->input_name = "IMG Infrared Decoder";
- rdev->s_filter = img_ir_set_filter;
+ rdev->s_filter = img_ir_set_normal_filter;
+ rdev->s_wakeup_filter = img_ir_set_wakeup_filter;
/* Register hardware decoder */
error = rc_register_device(rdev);
*/
#include "img-ir-hw.h"
+#include <linux/bitrev.h>
/* Convert NEC data to a scancode */
static int img_ir_nec_scancode(int len, u64 raw, int *scancode, u64 protocols)
data_inv = (raw >> 24) & 0xff;
if ((data_inv ^ data) != 0xff) {
/* 32-bit NEC (used by Apple and TiVo remotes) */
- /* scan encoding: aaAAddDD */
- *scancode = addr_inv << 24 |
- addr << 16 |
- data_inv << 8 |
- data;
+ /* scan encoding: as transmitted, MSBit = first received bit */
+ *scancode = bitrev8(addr) << 24 |
+ bitrev8(addr_inv) << 16 |
+ bitrev8(data) << 8 |
+ bitrev8(data_inv);
} else if ((addr_inv ^ addr) != 0xff) {
/* Extended NEC */
/* scan encoding: AAaaDD */
if ((in->data | in->mask) & 0xff000000) {
/* 32-bit NEC (used by Apple and TiVo remotes) */
- /* scan encoding: aaAAddDD */
- addr_inv = (in->data >> 24) & 0xff;
- addr_inv_m = (in->mask >> 24) & 0xff;
- addr = (in->data >> 16) & 0xff;
- addr_m = (in->mask >> 16) & 0xff;
- data_inv = (in->data >> 8) & 0xff;
- data_inv_m = (in->mask >> 8) & 0xff;
+ /* scan encoding: as transmitted, MSBit = first received bit */
+ addr = bitrev8(in->data >> 24);
+ addr_m = bitrev8(in->mask >> 24);
+ addr_inv = bitrev8(in->data >> 16);
+ addr_inv_m = bitrev8(in->mask >> 16);
+ data = bitrev8(in->data >> 8);
+ data_m = bitrev8(in->mask >> 8);
+ data_inv = bitrev8(in->data >> 0);
+ data_inv_m = bitrev8(in->mask >> 0);
} else if ((in->data | in->mask) & 0x00ff0000) {
/* Extended NEC */
/* scan encoding AAaaDD */
if (send_32bits) {
/* NEC transport, but modified protocol, used by at
* least Apple and TiVo remotes */
- scancode = not_address << 24 |
- address << 16 |
- not_command << 8 |
- command;
+ scancode = data->bits;
IR_dprintk(1, "NEC (modified) scancode 0x%08x\n", scancode);
} else if ((address ^ not_address) != 0xff) {
/* Extended NEC */
* Initial mapping is for the TiVo remote included in the Nero LiquidTV bundle,
* which also ships with a TiVo-branded IR transceiver, supported by the mceusb
* driver. Note that the remote uses an NEC-ish protocol, but instead of having
- * a command/not_command pair, it has a vendor ID of 0x3085, but some keys, the
+ * a command/not_command pair, it has a vendor ID of 0xa10c, but some keys, the
* NEC extended checksums do pass, so the table presently has the intended
* values and the checksum-passed versions for those keys.
*/
static struct rc_map_table tivo[] = {
- { 0x3085f009, KEY_MEDIA }, /* TiVo Button */
- { 0x3085e010, KEY_POWER2 }, /* TV Power */
- { 0x3085e011, KEY_TV }, /* Live TV/Swap */
- { 0x3085c034, KEY_VIDEO_NEXT }, /* TV Input */
- { 0x3085e013, KEY_INFO },
- { 0x3085a05f, KEY_CYCLEWINDOWS }, /* Window */
+ { 0xa10c900f, KEY_MEDIA }, /* TiVo Button */
+ { 0xa10c0807, KEY_POWER2 }, /* TV Power */
+ { 0xa10c8807, KEY_TV }, /* Live TV/Swap */
+ { 0xa10c2c03, KEY_VIDEO_NEXT }, /* TV Input */
+ { 0xa10cc807, KEY_INFO },
+ { 0xa10cfa05, KEY_CYCLEWINDOWS }, /* Window */
{ 0x0085305f, KEY_CYCLEWINDOWS },
- { 0x3085c036, KEY_EPG }, /* Guide */
+ { 0xa10c6c03, KEY_EPG }, /* Guide */
- { 0x3085e014, KEY_UP },
- { 0x3085e016, KEY_DOWN },
- { 0x3085e017, KEY_LEFT },
- { 0x3085e015, KEY_RIGHT },
+ { 0xa10c2807, KEY_UP },
+ { 0xa10c6807, KEY_DOWN },
+ { 0xa10ce807, KEY_LEFT },
+ { 0xa10ca807, KEY_RIGHT },
- { 0x3085e018, KEY_SCROLLDOWN }, /* Red Thumbs Down */
- { 0x3085e019, KEY_SELECT },
- { 0x3085e01a, KEY_SCROLLUP }, /* Green Thumbs Up */
+ { 0xa10c1807, KEY_SCROLLDOWN }, /* Red Thumbs Down */
+ { 0xa10c9807, KEY_SELECT },
+ { 0xa10c5807, KEY_SCROLLUP }, /* Green Thumbs Up */
- { 0x3085e01c, KEY_VOLUMEUP },
- { 0x3085e01d, KEY_VOLUMEDOWN },
- { 0x3085e01b, KEY_MUTE },
- { 0x3085d020, KEY_RECORD },
- { 0x3085e01e, KEY_CHANNELUP },
- { 0x3085e01f, KEY_CHANNELDOWN },
+ { 0xa10c3807, KEY_VOLUMEUP },
+ { 0xa10cb807, KEY_VOLUMEDOWN },
+ { 0xa10cd807, KEY_MUTE },
+ { 0xa10c040b, KEY_RECORD },
+ { 0xa10c7807, KEY_CHANNELUP },
+ { 0xa10cf807, KEY_CHANNELDOWN },
{ 0x0085301f, KEY_CHANNELDOWN },
- { 0x3085d021, KEY_PLAY },
- { 0x3085d023, KEY_PAUSE },
- { 0x3085d025, KEY_SLOW },
- { 0x3085d022, KEY_REWIND },
- { 0x3085d024, KEY_FASTFORWARD },
- { 0x3085d026, KEY_PREVIOUS },
- { 0x3085d027, KEY_NEXT }, /* ->| */
+ { 0xa10c840b, KEY_PLAY },
+ { 0xa10cc40b, KEY_PAUSE },
+ { 0xa10ca40b, KEY_SLOW },
+ { 0xa10c440b, KEY_REWIND },
+ { 0xa10c240b, KEY_FASTFORWARD },
+ { 0xa10c640b, KEY_PREVIOUS },
+ { 0xa10ce40b, KEY_NEXT }, /* ->| */
- { 0x3085b044, KEY_ZOOM }, /* Aspect */
- { 0x3085b048, KEY_STOP },
- { 0x3085b04a, KEY_DVD }, /* DVD Menu */
+ { 0xa10c220d, KEY_ZOOM }, /* Aspect */
+ { 0xa10c120d, KEY_STOP },
+ { 0xa10c520d, KEY_DVD }, /* DVD Menu */
- { 0x3085d028, KEY_NUMERIC_1 },
- { 0x3085d029, KEY_NUMERIC_2 },
- { 0x3085d02a, KEY_NUMERIC_3 },
- { 0x3085d02b, KEY_NUMERIC_4 },
- { 0x3085d02c, KEY_NUMERIC_5 },
- { 0x3085d02d, KEY_NUMERIC_6 },
- { 0x3085d02e, KEY_NUMERIC_7 },
- { 0x3085d02f, KEY_NUMERIC_8 },
+ { 0xa10c140b, KEY_NUMERIC_1 },
+ { 0xa10c940b, KEY_NUMERIC_2 },
+ { 0xa10c540b, KEY_NUMERIC_3 },
+ { 0xa10cd40b, KEY_NUMERIC_4 },
+ { 0xa10c340b, KEY_NUMERIC_5 },
+ { 0xa10cb40b, KEY_NUMERIC_6 },
+ { 0xa10c740b, KEY_NUMERIC_7 },
+ { 0xa10cf40b, KEY_NUMERIC_8 },
{ 0x0085302f, KEY_NUMERIC_8 },
- { 0x3085c030, KEY_NUMERIC_9 },
- { 0x3085c031, KEY_NUMERIC_0 },
- { 0x3085c033, KEY_ENTER },
- { 0x3085c032, KEY_CLEAR },
+ { 0xa10c0c03, KEY_NUMERIC_9 },
+ { 0xa10c8c03, KEY_NUMERIC_0 },
+ { 0xa10ccc03, KEY_ENTER },
+ { 0xa10c4c03, KEY_CLEAR },
};
static struct rc_map_list tivo_map = {
static void ir_do_keydown(struct rc_dev *dev, int scancode,
u32 keycode, u8 toggle)
{
- struct rc_scancode_filter *filter;
- bool new_event = !dev->keypressed ||
- dev->last_scancode != scancode ||
- dev->last_toggle != toggle;
+ bool new_event = (!dev->keypressed ||
+ dev->last_scancode != scancode ||
+ dev->last_toggle != toggle);
if (new_event && dev->keypressed)
ir_do_keyup(dev, false);
- /* Generic scancode filtering */
- filter = &dev->scancode_filters[RC_FILTER_NORMAL];
- if (filter->mask && ((scancode ^ filter->data) & filter->mask))
- return;
-
input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
if (new_event && keycode != KEY_RESERVED) {
int rc, i, count = 0;
ssize_t ret;
int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
+ int (*set_filter)(struct rc_dev *dev, struct rc_scancode_filter *filter);
struct rc_scancode_filter local_filter, *filter;
/* Device is being removed */
* Fall back to clearing the filter.
*/
filter = &dev->scancode_filters[fattr->type];
- if (old_type != type && filter->mask) {
+ set_filter = (fattr->type == RC_FILTER_NORMAL)
+ ? dev->s_filter : dev->s_wakeup_filter;
+
+ if (set_filter && old_type != type && filter->mask) {
local_filter = *filter;
if (!type) {
/* no protocol => clear filter */
ret = -1;
- } else if (!dev->s_filter) {
- /* generic filtering => accept any filter */
- ret = 0;
} else {
/* hardware filtering => try setting, otherwise clear */
- ret = dev->s_filter(dev, fattr->type, &local_filter);
+ ret = set_filter(dev, &local_filter);
}
if (ret < 0) {
/* clear the filter */
local_filter.data = 0;
local_filter.mask = 0;
- if (dev->s_filter)
- dev->s_filter(dev, fattr->type, &local_filter);
+ set_filter(dev, &local_filter);
}
/* commit the new filter */
return -EINVAL;
mutex_lock(&dev->lock);
- if (fattr->mask)
+ if ((fattr->type == RC_FILTER_NORMAL && !dev->s_filter) ||
+ (fattr->type == RC_FILTER_WAKEUP && !dev->s_wakeup_filter))
+ val = 0;
+ else if (fattr->mask)
val = dev->scancode_filters[fattr->type].mask;
else
val = dev->scancode_filters[fattr->type].data;
struct rc_scancode_filter local_filter, *filter;
int ret;
unsigned long val;
+ int (*set_filter)(struct rc_dev *dev, struct rc_scancode_filter *filter);
/* Device is being removed */
if (!dev)
if (ret < 0)
return ret;
- /* Scancode filter not supported (but still accept 0) */
- if (!dev->s_filter && fattr->type != RC_FILTER_NORMAL)
- return val ? -EINVAL : count;
+ /* Can the scancode filter be set? */
+ set_filter = (fattr->type == RC_FILTER_NORMAL) ? dev->s_filter :
+ dev->s_wakeup_filter;
+ if (!set_filter)
+ return -EINVAL;
mutex_lock(&dev->lock);
local_filter.mask = val;
else
local_filter.data = val;
+
if (!dev->enabled_protocols[fattr->type] && local_filter.mask) {
/* refuse to set a filter unless a protocol is enabled */
ret = -EINVAL;
goto unlock;
}
- if (dev->s_filter) {
- ret = dev->s_filter(dev, fattr->type, &local_filter);
- if (ret < 0)
- goto unlock;
- }
+
+ ret = set_filter(dev, &local_filter);
+ if (ret < 0)
+ goto unlock;
/* Success, commit the new filter */
*filter = local_filter;
static RC_FILTER_ATTR(wakeup_filter_mask, S_IRUGO|S_IWUSR,
show_filter, store_filter, RC_FILTER_WAKEUP, true);
-static struct attribute *rc_dev_attrs[] = {
+static struct attribute *rc_dev_protocol_attrs[] = {
&dev_attr_protocols.attr.attr,
+ NULL,
+};
+
+static struct attribute_group rc_dev_protocol_attr_grp = {
+ .attrs = rc_dev_protocol_attrs,
+};
+
+static struct attribute *rc_dev_wakeup_protocol_attrs[] = {
&dev_attr_wakeup_protocols.attr.attr,
+ NULL,
+};
+
+static struct attribute_group rc_dev_wakeup_protocol_attr_grp = {
+ .attrs = rc_dev_wakeup_protocol_attrs,
+};
+
+static struct attribute *rc_dev_filter_attrs[] = {
&dev_attr_filter.attr.attr,
&dev_attr_filter_mask.attr.attr,
- &dev_attr_wakeup_filter.attr.attr,
- &dev_attr_wakeup_filter_mask.attr.attr,
NULL,
};
-static struct attribute_group rc_dev_attr_grp = {
- .attrs = rc_dev_attrs,
+static struct attribute_group rc_dev_filter_attr_grp = {
+ .attrs = rc_dev_filter_attrs,
};
-static const struct attribute_group *rc_dev_attr_groups[] = {
- &rc_dev_attr_grp,
- NULL
+static struct attribute *rc_dev_wakeup_filter_attrs[] = {
+ &dev_attr_wakeup_filter.attr.attr,
+ &dev_attr_wakeup_filter_mask.attr.attr,
+ NULL,
+};
+
+static struct attribute_group rc_dev_wakeup_filter_attr_grp = {
+ .attrs = rc_dev_wakeup_filter_attrs,
};
static struct device_type rc_dev_type = {
- .groups = rc_dev_attr_groups,
.release = rc_dev_release,
.uevent = rc_dev_uevent,
};
static bool raw_init = false; /* raw decoders loaded? */
struct rc_map *rc_map;
const char *path;
- int rc, devno;
+ int rc, devno, attr = 0;
if (!dev || !dev->map_name)
return -EINVAL;
return -ENOMEM;
} while (test_and_set_bit(devno, ir_core_dev_number));
+ dev->dev.groups = dev->sysfs_groups;
+ dev->sysfs_groups[attr++] = &rc_dev_protocol_attr_grp;
+ if (dev->s_filter)
+ dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;
+ if (dev->s_wakeup_filter)
+ dev->sysfs_groups[attr++] = &rc_dev_wakeup_filter_attr_grp;
+ if (dev->change_wakeup_protocol)
+ dev->sysfs_groups[attr++] = &rc_dev_wakeup_protocol_attr_grp;
+ dev->sysfs_groups[attr++] = NULL;
+
/*
* Take the lock here, as the device sysfs node will appear
* when device_add() is called, which may trigger an ir-keytable udev
static int r820t_multi_read(struct r820t_priv *priv)
{
int rc, i;
- u8 data[2], min = 0, max = 255, sum = 0;
+ u16 sum = 0;
+ u8 data[2], min = 255, max = 0;
usleep_range(5000, 6000);
offset += 200000;
}
#endif
+ break;
default:
tuner_err("Unsupported tuner type %d.\n", new_type);
break;
/* RTL2832P devices: */
{ DVB_USB_DEVICE(USB_VID_HANFTEK, 0x0131,
&rtl2832u_props, "Astrometa DVB-T2", NULL) },
- { DVB_USB_DEVICE(USB_VID_KYE, 0x707f,
- &rtl2832u_props, "Genius TVGo DVB-T03", NULL) },
{ }
};
MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
{
int i, sc;
- if (quality < 50)
+ if (quality <= 0)
+ sc = 5000;
+ else if (quality < 50)
sc = 5000 / quality;
else
sc = 200 - quality * 2;
"stk1160-mixer");
snprintf(card->longname, sizeof(card->longname),
"stk1160 ac97 codec mixer control");
- strncpy(card->driver, dev->dev->driver->name, sizeof(card->driver));
+ strlcpy(card->driver, dev->dev->driver->name, sizeof(card->driver));
rc = snd_ac97_bus(card, 0, &stk1160_ac97_ops, NULL, &ac97_bus);
if (rc)
int num_sg, bool read, int timeout)
{
struct completion trans_done;
- u8 dir;
- int err = 0, i, count;
+ int err = 0, count;
long timeleft;
unsigned long flags;
- struct scatterlist *sg;
- enum dma_data_direction dma_dir;
- u32 val;
- dma_addr_t addr;
- unsigned int len;
-
- dev_dbg(&(pcr->pci->dev), "--> %s: num_sg = %d\n", __func__, num_sg);
-
- /* don't transfer data during abort processing */
- if (pcr->remove_pci)
- return -EINVAL;
-
- if ((sglist == NULL) || (num_sg <= 0))
- return -EINVAL;
- if (read) {
- dir = DEVICE_TO_HOST;
- dma_dir = DMA_FROM_DEVICE;
- } else {
- dir = HOST_TO_DEVICE;
- dma_dir = DMA_TO_DEVICE;
- }
-
- count = dma_map_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir);
+ count = rtsx_pci_dma_map_sg(pcr, sglist, num_sg, read);
if (count < 1) {
dev_err(&(pcr->pci->dev), "scatterlist map failed\n");
return -EINVAL;
}
dev_dbg(&(pcr->pci->dev), "DMA mapping count: %d\n", count);
- val = ((u32)(dir & 0x01) << 29) | TRIG_DMA | ADMA_MODE;
- pcr->sgi = 0;
- for_each_sg(sglist, sg, count, i) {
- addr = sg_dma_address(sg);
- len = sg_dma_len(sg);
- rtsx_pci_add_sg_tbl(pcr, addr, len, i == count - 1);
- }
spin_lock_irqsave(&pcr->lock, flags);
pcr->done = &trans_done;
pcr->trans_result = TRANS_NOT_READY;
init_completion(&trans_done);
- rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr);
- rtsx_pci_writel(pcr, RTSX_HDBCTLR, val);
spin_unlock_irqrestore(&pcr->lock, flags);
+ rtsx_pci_dma_transfer(pcr, sglist, count, read);
+
timeleft = wait_for_completion_interruptible_timeout(
&trans_done, msecs_to_jiffies(timeout));
if (timeleft <= 0) {
pcr->done = NULL;
spin_unlock_irqrestore(&pcr->lock, flags);
- dma_unmap_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir);
+ rtsx_pci_dma_unmap_sg(pcr, sglist, num_sg, read);
if ((err < 0) && (err != -ENODEV))
rtsx_pci_stop_cmd(pcr);
}
EXPORT_SYMBOL_GPL(rtsx_pci_transfer_data);
+int rtsx_pci_dma_map_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+ int num_sg, bool read)
+{
+ enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ if (pcr->remove_pci)
+ return -EINVAL;
+
+ if ((sglist == NULL) || num_sg < 1)
+ return -EINVAL;
+
+ return dma_map_sg(&(pcr->pci->dev), sglist, num_sg, dir);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_dma_map_sg);
+
+int rtsx_pci_dma_unmap_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+ int num_sg, bool read)
+{
+ enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ if (pcr->remove_pci)
+ return -EINVAL;
+
+ if (sglist == NULL || num_sg < 1)
+ return -EINVAL;
+
+ dma_unmap_sg(&(pcr->pci->dev), sglist, num_sg, dir);
+ return num_sg;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_dma_unmap_sg);
+
+int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+ int sg_count, bool read)
+{
+ struct scatterlist *sg;
+ dma_addr_t addr;
+ unsigned int len;
+ int i;
+ u32 val;
+ u8 dir = read ? DEVICE_TO_HOST : HOST_TO_DEVICE;
+ unsigned long flags;
+
+ if (pcr->remove_pci)
+ return -EINVAL;
+
+ if ((sglist == NULL) || (sg_count < 1))
+ return -EINVAL;
+
+ val = ((u32)(dir & 0x01) << 29) | TRIG_DMA | ADMA_MODE;
+ pcr->sgi = 0;
+ for_each_sg(sglist, sg, sg_count, i) {
+ addr = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+ rtsx_pci_add_sg_tbl(pcr, addr, len, i == sg_count - 1);
+ }
+
+ spin_lock_irqsave(&pcr->lock, flags);
+
+ rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr);
+ rtsx_pci_writel(pcr, RTSX_HDBCTLR, val);
+
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_dma_transfer);
+
int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len)
{
int err;
int_reg = rtsx_pci_readl(pcr, RTSX_BIPR);
/* Clear interrupt flag */
rtsx_pci_writel(pcr, RTSX_BIPR, int_reg);
+ dev_dbg(&pcr->pci->dev, "=========== BIPR 0x%8x ==========\n", int_reg);
+
if ((int_reg & pcr->bier) == 0) {
spin_unlock(&pcr->lock);
return IRQ_NONE;
}
if (int_reg & (NEED_COMPLETE_INT | DELINK_INT)) {
- if (int_reg & (TRANS_FAIL_INT | DELINK_INT)) {
+ if (int_reg & (TRANS_FAIL_INT | DELINK_INT))
pcr->trans_result = TRANS_RESULT_FAIL;
- if (pcr->done)
- complete(pcr->done);
- } else if (int_reg & TRANS_OK_INT) {
+ else if (int_reg & TRANS_OK_INT)
pcr->trans_result = TRANS_RESULT_OK;
- if (pcr->done)
- complete(pcr->done);
+
+ if (pcr->done)
+ complete(pcr->done);
+
+ if (int_reg & SD_EXIST) {
+ struct rtsx_slot *slot = &pcr->slots[RTSX_SD_CARD];
+ if (slot && slot->done_transfer)
+ slot->done_transfer(slot->p_dev);
+ }
+
+ if (int_reg & MS_EXIST) {
+ struct rtsx_slot *slot = &pcr->slots[RTSX_SD_CARD];
+ if (slot && slot->done_transfer)
+ slot->done_transfer(slot->p_dev);
}
}
+
if (pcr->card_inserted || pcr->card_removed)
schedule_delayed_work(&pcr->carddet_work,
msecs_to_jiffies(200));
{
int err;
- if (!(mmc_can_sanitize(card) &&
- (card->host->caps2 & MMC_CAP2_SANITIZE))) {
+ if (!mmc_can_sanitize(card)) {
pr_warn("%s: %s - SANITIZE is not supported\n",
mmc_hostname(card->host), __func__);
err = -EOPNOTSUPP;
return result;
}
-static int send_stop(struct mmc_card *card, u32 *status)
-{
- struct mmc_command cmd = {0};
- int err;
-
- cmd.opcode = MMC_STOP_TRANSMISSION;
- cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- err = mmc_wait_for_cmd(card->host, &cmd, 5);
- if (err == 0)
- *status = cmd.resp[0];
- return err;
-}
-
static int get_card_status(struct mmc_card *card, u32 *status, int retries)
{
struct mmc_command cmd = {0};
return err;
}
+static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
+ bool hw_busy_detect, struct request *req, int *gen_err)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+ int err = 0;
+ u32 status;
+
+ do {
+ err = get_card_status(card, &status, 5);
+ if (err) {
+ pr_err("%s: error %d requesting status\n",
+ req->rq_disk->disk_name, err);
+ return err;
+ }
+
+ if (status & R1_ERROR) {
+ pr_err("%s: %s: error sending status cmd, status %#x\n",
+ req->rq_disk->disk_name, __func__, status);
+ *gen_err = 1;
+ }
+
+ /* We may rely on the host hw to handle busy detection.*/
+ if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) &&
+ hw_busy_detect)
+ break;
+
+ /*
+ * Timeout if the device never becomes ready for data and never
+ * leaves the program state.
+ */
+ if (time_after(jiffies, timeout)) {
+ pr_err("%s: Card stuck in programming state! %s %s\n",
+ mmc_hostname(card->host),
+ req->rq_disk->disk_name, __func__);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * Some cards mishandle the status bits,
+ * so make sure to check both the busy
+ * indication and the card state.
+ */
+ } while (!(status & R1_READY_FOR_DATA) ||
+ (R1_CURRENT_STATE(status) == R1_STATE_PRG));
+
+ return err;
+}
+
+static int send_stop(struct mmc_card *card, unsigned int timeout_ms,
+ struct request *req, int *gen_err, u32 *stop_status)
+{
+ struct mmc_host *host = card->host;
+ struct mmc_command cmd = {0};
+ int err;
+ bool use_r1b_resp = rq_data_dir(req) == WRITE;
+
+ /*
+ * Normally we use R1B responses for WRITE, but in cases where the host
+ * has specified a max_busy_timeout we need to validate it. A failure
+ * means we need to prevent the host from doing hw busy detection, which
+ * is done by converting to a R1 response instead.
+ */
+ if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
+ use_r1b_resp = false;
+
+ cmd.opcode = MMC_STOP_TRANSMISSION;
+ if (use_r1b_resp) {
+ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ cmd.busy_timeout = timeout_ms;
+ } else {
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ }
+
+ err = mmc_wait_for_cmd(host, &cmd, 5);
+ if (err)
+ return err;
+
+ *stop_status = cmd.resp[0];
+
+ /* No need to check card status in case of READ. */
+ if (rq_data_dir(req) == READ)
+ return 0;
+
+ if (!mmc_host_is_spi(host) &&
+ (*stop_status & R1_ERROR)) {
+ pr_err("%s: %s: general error sending stop command, resp %#x\n",
+ req->rq_disk->disk_name, __func__, *stop_status);
+ *gen_err = 1;
+ }
+
+ return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err);
+}
+
#define ERR_NOMEDIUM 3
#define ERR_RETRY 2
#define ERR_ABORT 1
*/
if (R1_CURRENT_STATE(status) == R1_STATE_DATA ||
R1_CURRENT_STATE(status) == R1_STATE_RCV) {
- err = send_stop(card, &stop_status);
- if (err)
+ err = send_stop(card,
+ DIV_ROUND_UP(brq->data.timeout_ns, 1000000),
+ req, gen_err, &stop_status);
+ if (err) {
pr_err("%s: error %d sending stop command\n",
req->rq_disk->disk_name, err);
-
- /*
- * If the stop cmd also timed out, the card is probably
- * not present, so abort. Other errors are bad news too.
- */
- if (err)
+ /*
+ * If the stop cmd also timed out, the card is probably
+ * not present, so abort. Other errors are bad news too.
+ */
return ERR_ABORT;
+ }
+
if (stop_status & R1_CARD_ECC_FAILED)
*ecc_err = 1;
- if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
- if (stop_status & R1_ERROR) {
- pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
- req->rq_disk->disk_name, __func__,
- stop_status);
- *gen_err = 1;
- }
}
/* Check for set block count errors */
* program mode, which we have to wait for it to complete.
*/
if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
- u32 status;
- unsigned long timeout;
+ int err;
/* Check stop command response */
if (brq->stop.resp[0] & R1_ERROR) {
gen_err = 1;
}
- timeout = jiffies + msecs_to_jiffies(MMC_BLK_TIMEOUT_MS);
- do {
- int err = get_card_status(card, &status, 5);
- if (err) {
- pr_err("%s: error %d requesting status\n",
- req->rq_disk->disk_name, err);
- return MMC_BLK_CMD_ERR;
- }
-
- if (status & R1_ERROR) {
- pr_err("%s: %s: general error sending status command, card status %#x\n",
- req->rq_disk->disk_name, __func__,
- status);
- gen_err = 1;
- }
-
- /* Timeout if the device never becomes ready for data
- * and never leaves the program state.
- */
- if (time_after(jiffies, timeout)) {
- pr_err("%s: Card stuck in programming state!"\
- " %s %s\n", mmc_hostname(card->host),
- req->rq_disk->disk_name, __func__);
-
- return MMC_BLK_CMD_ERR;
- }
- /*
- * Some cards mishandle the status bits,
- * so make sure to check both the busy
- * indication and the card state.
- */
- } while (!(status & R1_READY_FOR_DATA) ||
- (R1_CURRENT_STATE(status) == R1_STATE_PRG));
+ err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req,
+ &gen_err);
+ if (err)
+ return MMC_BLK_CMD_ERR;
}
/* if general error occurs, retry the write operation. */
brq->data.blksz = 512;
brq->stop.opcode = MMC_STOP_TRANSMISSION;
brq->stop.arg = 0;
- brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
brq->data.blocks = blk_rq_sectors(req);
/*
if (rq_data_dir(req) == READ) {
brq->cmd.opcode = readcmd;
brq->data.flags |= MMC_DATA_READ;
+ if (brq->mrq.stop)
+ brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
+ MMC_CMD_AC;
} else {
brq->cmd.opcode = writecmd;
brq->data.flags |= MMC_DATA_WRITE;
+ if (brq->mrq.stop)
+ brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
+ MMC_CMD_AC;
}
if (do_rel_wr)
# MMC core configuration
#
-config MMC_UNSAFE_RESUME
- bool "Assume MMC/SD cards are non-removable (DANGEROUS)"
- help
- If you say Y here, the MMC layer will assume that all cards
- stayed in their respective slots during the suspend. The
- normal behaviour is to remove them at suspend and
- redetecting them at resume. Breaking this assumption will
- in most cases result in data corruption.
-
- This option is usually just for embedded systems which use
- a MMC/SD card for rootfs. Most people should say N here.
-
- This option sets a default which can be overridden by the
- module parameter "removable=0" or "removable=1".
-
config MMC_CLKGATE
bool "MMC host clock gating"
help
{
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
- int ret = 0;
- if (host->bus_ops->runtime_suspend)
- ret = host->bus_ops->runtime_suspend(host);
-
- return ret;
+ return host->bus_ops->runtime_suspend(host);
}
static int mmc_runtime_resume(struct device *dev)
{
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
- int ret = 0;
- if (host->bus_ops->runtime_resume)
- ret = host->bus_ops->runtime_resume(host);
-
- return ret;
+ return host->bus_ops->runtime_resume(host);
}
static int mmc_runtime_idle(struct device *dev)
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sd.h>
+#include <linux/mmc/slot-gpio.h>
#include "core.h"
#include "bus.h"
bool use_spi_crc = 1;
module_param(use_spi_crc, bool, 0);
-/*
- * We normally treat cards as removed during suspend if they are not
- * known to be on a non-removable bus, to avoid the risk of writing
- * back data to a different card after resume. Allow this to be
- * overridden if necessary.
- */
-#ifdef CONFIG_MMC_UNSAFE_RESUME
-bool mmc_assume_removable;
-#else
-bool mmc_assume_removable = 1;
-#endif
-EXPORT_SYMBOL(mmc_assume_removable);
-module_param_named(removable, mmc_assume_removable, bool, 0644);
-MODULE_PARM_DESC(
- removable,
- "MMC/SD cards are removable and may be removed during suspend");
-
/*
* Internal function. Schedule delayed work in the MMC work queue.
*/
}
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal, true);
+ EXT_CSD_BKOPS_START, 1, timeout,
+ use_busy_signal, true, false);
if (err) {
pr_warn("%s: Error %d starting bkops\n",
mmc_hostname(card->host), err);
cmd.opcode = MMC_ERASE;
cmd.arg = arg;
cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- cmd.cmd_timeout_ms = mmc_erase_timeout(card, arg, qty);
+ cmd.busy_timeout = mmc_erase_timeout(card, arg, qty);
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
pr_err("mmc_erase: erase error %d, status %#x\n",
y = 0;
for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) {
timeout = mmc_erase_timeout(card, arg, qty + x);
- if (timeout > host->max_discard_to)
+ if (timeout > host->max_busy_timeout)
break;
if (timeout < last_timeout)
break;
struct mmc_host *host = card->host;
unsigned int max_discard, max_trim;
- if (!host->max_discard_to)
+ if (!host->max_busy_timeout)
return UINT_MAX;
/*
max_discard = 0;
}
pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n",
- mmc_hostname(host), max_discard, host->max_discard_to);
+ mmc_hostname(host), max_discard, host->max_busy_timeout);
return max_discard;
}
EXPORT_SYMBOL(mmc_calc_max_discard);
{
struct mmc_card *card = host->card;
- if (!host->bus_ops->power_restore)
- return -EOPNOTSUPP;
-
if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
return -EOPNOTSUPP;
{
int ret;
- if ((host->caps & MMC_CAP_NONREMOVABLE) || !host->bus_ops->alive)
+ if (host->caps & MMC_CAP_NONREMOVABLE)
return 0;
if (!host->card || mmc_card_removed(host->card))
* if there is a _removable_ card registered, check whether it is
* still present
*/
- if (host->bus_ops && host->bus_ops->detect && !host->bus_dead
+ if (host->bus_ops && !host->bus_dead
&& !(host->caps & MMC_CAP_NONREMOVABLE))
host->bus_ops->detect(host);
mmc_power_off(host);
else
mmc_power_up(host, host->ocr_avail);
+ mmc_gpiod_request_cd_irq(host);
_mmc_detect_change(host, 0, false);
}
host->removed = 1;
spin_unlock_irqrestore(&host->lock, flags);
#endif
+ if (host->slot.cd_irq >= 0)
+ disable_irq(host->slot.cd_irq);
host->rescan_disable = 1;
cancel_delayed_work_sync(&host->detect);
mmc_bus_get(host);
- if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
+ if (!host->bus_ops || host->bus_dead) {
mmc_bus_put(host);
return -EINVAL;
}
mmc_bus_get(host);
- if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
+ if (!host->bus_ops || host->bus_dead) {
mmc_bus_put(host);
return -EINVAL;
}
*/
int mmc_flush_cache(struct mmc_card *card)
{
- struct mmc_host *host = card->host;
int err = 0;
- if (!(host->caps2 & MMC_CAP2_CACHE_CTRL))
- return err;
-
if (mmc_card_mmc(card) &&
(card->ext_csd.cache_size > 0) &&
(card->ext_csd.cache_ctrl & 1)) {
}
EXPORT_SYMBOL(mmc_flush_cache);
-/*
- * Turn the cache ON/OFF.
- * Turning the cache OFF shall trigger flushing of the data
- * to the non-volatile storage.
- * This function should be called with host claimed
- */
-int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
-{
- struct mmc_card *card = host->card;
- unsigned int timeout;
- int err = 0;
-
- if (!(host->caps2 & MMC_CAP2_CACHE_CTRL) ||
- mmc_card_is_removable(host))
- return err;
-
- if (card && mmc_card_mmc(card) &&
- (card->ext_csd.cache_size > 0)) {
- enable = !!enable;
-
- if (card->ext_csd.cache_ctrl ^ enable) {
- timeout = enable ? card->ext_csd.generic_cmd6_time : 0;
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_CACHE_CTRL, enable, timeout);
- if (err)
- pr_err("%s: cache %s error %d\n",
- mmc_hostname(card->host),
- enable ? "on" : "off",
- err);
- else
- card->ext_csd.cache_ctrl = enable;
- }
- }
-
- return err;
-}
-EXPORT_SYMBOL(mmc_cache_ctrl);
-
#ifdef CONFIG_PM
/* Do the card removal on suspend if card is assumed removeable
/* Validate prerequisites for suspend */
if (host->bus_ops->pre_suspend)
err = host->bus_ops->pre_suspend(host);
- if (!err && host->bus_ops->suspend)
+ if (!err)
break;
/* Calling bus_ops->remove() with a claimed host can deadlock */
host->caps |= MMC_CAP_SD_HIGHSPEED;
if (of_find_property(np, "cap-mmc-highspeed", &len))
host->caps |= MMC_CAP_MMC_HIGHSPEED;
+ if (of_find_property(np, "sd-uhs-sdr12", &len))
+ host->caps |= MMC_CAP_UHS_SDR12;
+ if (of_find_property(np, "sd-uhs-sdr25", &len))
+ host->caps |= MMC_CAP_UHS_SDR25;
+ if (of_find_property(np, "sd-uhs-sdr50", &len))
+ host->caps |= MMC_CAP_UHS_SDR50;
+ if (of_find_property(np, "sd-uhs-sdr104", &len))
+ host->caps |= MMC_CAP_UHS_SDR104;
+ if (of_find_property(np, "sd-uhs-ddr50", &len))
+ host->caps |= MMC_CAP_UHS_DDR50;
if (of_find_property(np, "cap-power-off-card", &len))
host->caps |= MMC_CAP_POWER_OFF_CARD;
if (of_find_property(np, "cap-sdio-irq", &len))
host->pm_caps |= MMC_PM_KEEP_POWER;
if (of_find_property(np, "enable-sdio-wakeup", &len))
host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+ if (of_find_property(np, "mmc-ddr-1_8v", &len))
+ host->caps |= MMC_CAP_1_8V_DDR;
+ if (of_find_property(np, "mmc-ddr-1_2v", &len))
+ host->caps |= MMC_CAP_1_2V_DDR;
+ if (of_find_property(np, "mmc-hs200-1_8v", &len))
+ host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
+ if (of_find_property(np, "mmc-hs200-1_2v", &len))
+ host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
return 0;
/* switch to HS200 mode if bus width set successfully */
if (!err)
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 2, 0);
+ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, 2,
+ card->ext_csd.generic_cmd6_time,
+ true, true, true);
err:
return err;
}
host->caps2 & MMC_CAP2_HS200)
err = mmc_select_hs200(card);
else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1,
- card->ext_csd.generic_cmd6_time);
+ err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time,
+ true, true, true);
if (err && err != -EBADMSG)
goto free_card;
* If cache size is higher than 0, this indicates
* the existence of cache and it can be turned on.
*/
- if ((host->caps2 & MMC_CAP2_CACHE_CTRL) &&
- card->ext_csd.cache_size > 0) {
+ if (card->ext_csd.cache_size > 0) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_CACHE_CTRL, 1,
card->ext_csd.generic_cmd6_time);
{
struct mmc_command cmd = {0};
struct mmc_card *card = host->card;
+ unsigned int timeout_ms = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000);
int err;
- if (host->caps2 & MMC_CAP2_NO_SLEEP_CMD)
- return 0;
-
err = mmc_deselect_cards(host);
if (err)
return err;
cmd.arg = card->rca << 16;
cmd.arg |= 1 << 15;
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ /*
+ * If the max_busy_timeout of the host is specified, validate it against
+ * the sleep cmd timeout. A failure means we need to prevent the host
+ * from doing hw busy detection, which is done by converting to a R1
+ * response instead of a R1B.
+ */
+ if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) {
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ } else {
+ cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ cmd.busy_timeout = timeout_ms;
+ }
+
err = mmc_wait_for_cmd(host, &cmd, 0);
if (err)
return err;
* SEND_STATUS command to poll the status because that command (and most
* others) is invalid while the card sleeps.
*/
- if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
- mmc_delay(DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000));
+ if (!cmd.busy_timeout || !(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
+ mmc_delay(timeout_ms);
return err;
}
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_OFF_NOTIFICATION,
- notify_type, timeout, true, false);
+ notify_type, timeout, true, false, false);
if (err)
pr_err("%s: Power Off Notification timed out, %u\n",
mmc_hostname(card->host), timeout);
goto out;
}
- err = mmc_cache_ctrl(host, 0);
+ err = mmc_flush_cache(host->card);
if (err)
goto out;
}
static const struct mmc_bus_ops mmc_ops = {
- .remove = mmc_remove,
- .detect = mmc_detect,
- .suspend = NULL,
- .resume = NULL,
- .power_restore = mmc_power_restore,
- .alive = mmc_alive,
- .shutdown = mmc_shutdown,
-};
-
-static const struct mmc_bus_ops mmc_ops_unsafe = {
.remove = mmc_remove,
.detect = mmc_detect,
.suspend = mmc_suspend,
.shutdown = mmc_shutdown,
};
-static void mmc_attach_bus_ops(struct mmc_host *host)
-{
- const struct mmc_bus_ops *bus_ops;
-
- if (!mmc_card_is_removable(host))
- bus_ops = &mmc_ops_unsafe;
- else
- bus_ops = &mmc_ops;
- mmc_attach_bus(host, bus_ops);
-}
-
/*
* Starting point for MMC card init.
*/
if (err)
return err;
- mmc_attach_bus_ops(host);
+ mmc_attach_bus(host, &mmc_ops);
if (host->ocr_avail_mmc)
host->ocr_avail = host->ocr_avail_mmc;
* timeout of zero implies maximum possible timeout
* @use_busy_signal: use the busy signal as response type
* @send_status: send status cmd to poll for busy
+ * @ignore_crc: ignore CRC errors when sending status cmd to poll for busy
*
* Modifies the EXT_CSD register for selected card.
*/
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
- unsigned int timeout_ms, bool use_busy_signal, bool send_status)
+ unsigned int timeout_ms, bool use_busy_signal, bool send_status,
+ bool ignore_crc)
{
+ struct mmc_host *host = card->host;
int err;
struct mmc_command cmd = {0};
unsigned long timeout;
u32 status = 0;
- bool ignore_crc = false;
+ bool use_r1b_resp = use_busy_signal;
- BUG_ON(!card);
- BUG_ON(!card->host);
+ /*
+ * If the cmd timeout and the max_busy_timeout of the host are both
+ * specified, let's validate them. A failure means we need to prevent
+ * the host from doing hw busy detection, which is done by converting
+ * to a R1 response instead of a R1B.
+ */
+ if (timeout_ms && host->max_busy_timeout &&
+ (timeout_ms > host->max_busy_timeout))
+ use_r1b_resp = false;
cmd.opcode = MMC_SWITCH;
cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
(value << 8) |
set;
cmd.flags = MMC_CMD_AC;
- if (use_busy_signal)
+ if (use_r1b_resp) {
cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
- else
+ /*
+ * A busy_timeout of zero means the host can decide to use
+ * whatever value it finds suitable.
+ */
+ cmd.busy_timeout = timeout_ms;
+ } else {
cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
+ }
-
- cmd.cmd_timeout_ms = timeout_ms;
if (index == EXT_CSD_SANITIZE_START)
cmd.sanitize_busy = true;
- err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+ err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
if (err)
return err;
return 0;
/*
- * Must check status to be sure of no errors
- * If CMD13 is to check the busy completion of the timing change,
- * disable the check of CRC error.
+ * CRC errors shall only be ignored in cases were CMD13 is used to poll
+ * to detect busy completion.
*/
- if (index == EXT_CSD_HS_TIMING &&
- !(card->host->caps & MMC_CAP_WAIT_WHILE_BUSY))
- ignore_crc = true;
+ if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
+ ignore_crc = false;
+
+ /* We have an unspecified cmd timeout, use the fallback value. */
+ if (!timeout_ms)
+ timeout_ms = MMC_OPS_TIMEOUT_MS;
- timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
+ /* Must check status to be sure of no errors. */
+ timeout = jiffies + msecs_to_jiffies(timeout_ms);
do {
if (send_status) {
err = __mmc_send_status(card, &status, ignore_crc);
if (err)
return err;
}
- if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+ if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
break;
- if (mmc_host_is_spi(card->host))
+ if (mmc_host_is_spi(host))
break;
/*
/* Timeout if the device never leaves the program state. */
if (time_after(jiffies, timeout)) {
pr_err("%s: Card stuck in programming state! %s\n",
- mmc_hostname(card->host), __func__);
+ mmc_hostname(host), __func__);
return -ETIMEDOUT;
}
} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
- if (mmc_host_is_spi(card->host)) {
+ if (mmc_host_is_spi(host)) {
if (status & R1_SPI_ILLEGAL_COMMAND)
return -EBADMSG;
} else {
if (status & 0xFDFFA000)
- pr_warning("%s: unexpected status %#x after "
- "switch", mmc_hostname(card->host), status);
+ pr_warn("%s: unexpected status %#x after switch\n",
+ mmc_hostname(host), status);
if (status & R1_SWITCH_ERROR)
return -EBADMSG;
}
int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
unsigned int timeout_ms)
{
- return __mmc_switch(card, set, index, value, timeout_ms, true, true);
+ return __mmc_switch(card, set, index, value, timeout_ms, true, true,
+ false);
}
EXPORT_SYMBOL_GPL(mmc_switch);
}
static const struct mmc_bus_ops mmc_sd_ops = {
- .remove = mmc_sd_remove,
- .detect = mmc_sd_detect,
- .suspend = NULL,
- .resume = NULL,
- .power_restore = mmc_sd_power_restore,
- .alive = mmc_sd_alive,
- .shutdown = mmc_sd_suspend,
-};
-
-static const struct mmc_bus_ops mmc_sd_ops_unsafe = {
.remove = mmc_sd_remove,
.detect = mmc_sd_detect,
.runtime_suspend = mmc_sd_runtime_suspend,
.shutdown = mmc_sd_suspend,
};
-static void mmc_sd_attach_bus_ops(struct mmc_host *host)
-{
- const struct mmc_bus_ops *bus_ops;
-
- if (!mmc_card_is_removable(host))
- bus_ops = &mmc_sd_ops_unsafe;
- else
- bus_ops = &mmc_sd_ops;
- mmc_attach_bus(host, bus_ops);
-}
-
/*
* Starting point for SD card init.
*/
if (err)
return err;
- mmc_sd_attach_bus_ops(host);
+ mmc_attach_bus(host, &mmc_sd_ops);
if (host->ocr_avail_sd)
host->ocr_avail = host->ocr_avail_sd;
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/mmc/host.h>
#include <linux/slab.h>
struct mmc_gpio {
- int ro_gpio;
- int cd_gpio;
+ struct gpio_desc *ro_gpio;
+ struct gpio_desc *cd_gpio;
+ bool override_ro_active_level;
+ bool override_cd_active_level;
char *ro_label;
char cd_label[0];
};
ctx->ro_label = ctx->cd_label + len;
snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
- ctx->cd_gpio = -EINVAL;
- ctx->ro_gpio = -EINVAL;
host->slot.handler_priv = ctx;
}
}
{
struct mmc_gpio *ctx = host->slot.handler_priv;
- if (!ctx || !gpio_is_valid(ctx->ro_gpio))
+ if (!ctx || !ctx->ro_gpio)
return -ENOSYS;
- return !gpio_get_value_cansleep(ctx->ro_gpio) ^
- !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+ if (ctx->override_ro_active_level)
+ return !gpiod_get_raw_value_cansleep(ctx->ro_gpio) ^
+ !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+
+ return gpiod_get_value_cansleep(ctx->ro_gpio);
}
EXPORT_SYMBOL(mmc_gpio_get_ro);
{
struct mmc_gpio *ctx = host->slot.handler_priv;
- if (!ctx || !gpio_is_valid(ctx->cd_gpio))
+ if (!ctx || !ctx->cd_gpio)
return -ENOSYS;
- return !gpio_get_value_cansleep(ctx->cd_gpio) ^
- !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+ if (ctx->override_cd_active_level)
+ return !gpiod_get_raw_value_cansleep(ctx->cd_gpio) ^
+ !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+
+ return gpiod_get_value_cansleep(ctx->cd_gpio);
}
EXPORT_SYMBOL(mmc_gpio_get_cd);
if (ret < 0)
return ret;
- ctx->ro_gpio = gpio;
+ ctx->override_ro_active_level = true;
+ ctx->ro_gpio = gpio_to_desc(gpio);
return 0;
}
EXPORT_SYMBOL(mmc_gpio_request_ro);
+void mmc_gpiod_request_cd_irq(struct mmc_host *host)
+{
+ struct mmc_gpio *ctx = host->slot.handler_priv;
+ int ret, irq;
+
+ if (host->slot.cd_irq >= 0 || !ctx || !ctx->cd_gpio)
+ return;
+
+ irq = gpiod_to_irq(ctx->cd_gpio);
+
+ /*
+ * Even if gpiod_to_irq() returns a valid IRQ number, the platform might
+ * still prefer to poll, e.g., because that IRQ number is already used
+ * by another unit and cannot be shared.
+ */
+ if (irq >= 0 && host->caps & MMC_CAP_NEEDS_POLL)
+ irq = -EINVAL;
+
+ if (irq >= 0) {
+ ret = devm_request_threaded_irq(&host->class_dev, irq,
+ NULL, mmc_gpio_cd_irqt,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ ctx->cd_label, host);
+ if (ret < 0)
+ irq = ret;
+ }
+
+ host->slot.cd_irq = irq;
+
+ if (irq < 0)
+ host->caps |= MMC_CAP_NEEDS_POLL;
+}
+EXPORT_SYMBOL(mmc_gpiod_request_cd_irq);
+
/**
* mmc_gpio_request_cd - request a gpio for card-detection
* @host: mmc host
unsigned int debounce)
{
struct mmc_gpio *ctx;
- int irq = gpio_to_irq(gpio);
int ret;
ret = mmc_gpio_alloc(host);
return ret;
}
- /*
- * Even if gpio_to_irq() returns a valid IRQ number, the platform might
- * still prefer to poll, e.g., because that IRQ number is already used
- * by another unit and cannot be shared.
- */
- if (irq >= 0 && host->caps & MMC_CAP_NEEDS_POLL)
- irq = -EINVAL;
-
- if (irq >= 0) {
- ret = devm_request_threaded_irq(&host->class_dev, irq,
- NULL, mmc_gpio_cd_irqt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
- ctx->cd_label, host);
- if (ret < 0)
- irq = ret;
- }
-
- host->slot.cd_irq = irq;
-
- if (irq < 0)
- host->caps |= MMC_CAP_NEEDS_POLL;
+ ctx->override_cd_active_level = true;
+ ctx->cd_gpio = gpio_to_desc(gpio);
- ctx->cd_gpio = gpio;
+ mmc_gpiod_request_cd_irq(host);
return 0;
}
struct mmc_gpio *ctx = host->slot.handler_priv;
int gpio;
- if (!ctx || !gpio_is_valid(ctx->ro_gpio))
+ if (!ctx || !ctx->ro_gpio)
return;
- gpio = ctx->ro_gpio;
- ctx->ro_gpio = -EINVAL;
+ gpio = desc_to_gpio(ctx->ro_gpio);
+ ctx->ro_gpio = NULL;
devm_gpio_free(&host->class_dev, gpio);
}
struct mmc_gpio *ctx = host->slot.handler_priv;
int gpio;
- if (!ctx || !gpio_is_valid(ctx->cd_gpio))
+ if (!ctx || !ctx->cd_gpio)
return;
if (host->slot.cd_irq >= 0) {
host->slot.cd_irq = -EINVAL;
}
- gpio = ctx->cd_gpio;
- ctx->cd_gpio = -EINVAL;
+ gpio = desc_to_gpio(ctx->cd_gpio);
+ ctx->cd_gpio = NULL;
devm_gpio_free(&host->class_dev, gpio);
}
EXPORT_SYMBOL(mmc_gpio_free_cd);
+
+/**
+ * mmc_gpiod_request_cd - request a gpio descriptor for card-detection
+ * @host: mmc host
+ * @con_id: function within the GPIO consumer
+ * @idx: index of the GPIO to obtain in the consumer
+ * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
+ * @debounce: debounce time in microseconds
+ *
+ * Use this function in place of mmc_gpio_request_cd() to use the GPIO
+ * descriptor API. Note that it is paired with mmc_gpiod_free_cd() not
+ * mmc_gpio_free_cd(). Note also that it must be called prior to mmc_add_host()
+ * otherwise the caller must also call mmc_gpiod_request_cd_irq().
+ *
+ * Returns zero on success, else an error.
+ */
+int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
+ unsigned int idx, bool override_active_level,
+ unsigned int debounce)
+{
+ struct mmc_gpio *ctx;
+ struct gpio_desc *desc;
+ int ret;
+
+ ret = mmc_gpio_alloc(host);
+ if (ret < 0)
+ return ret;
+
+ ctx = host->slot.handler_priv;
+
+ if (!con_id)
+ con_id = ctx->cd_label;
+
+ desc = devm_gpiod_get_index(host->parent, con_id, idx);
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+
+ ret = gpiod_direction_input(desc);
+ if (ret < 0)
+ return ret;
+
+ if (debounce) {
+ ret = gpiod_set_debounce(desc, debounce);
+ if (ret < 0)
+ return ret;
+ }
+
+ ctx->override_cd_active_level = override_active_level;
+ ctx->cd_gpio = desc;
+
+ return 0;
+}
+EXPORT_SYMBOL(mmc_gpiod_request_cd);
+
+/**
+ * mmc_gpiod_free_cd - free the card-detection gpio descriptor
+ * @host: mmc host
+ *
+ * It's provided only for cases that client drivers need to manually free
+ * up the card-detection gpio requested by mmc_gpiod_request_cd().
+ */
+void mmc_gpiod_free_cd(struct mmc_host *host)
+{
+ struct mmc_gpio *ctx = host->slot.handler_priv;
+
+ if (!ctx || !ctx->cd_gpio)
+ return;
+
+ if (host->slot.cd_irq >= 0) {
+ devm_free_irq(&host->class_dev, host->slot.cd_irq, host);
+ host->slot.cd_irq = -EINVAL;
+ }
+
+ devm_gpiod_put(&host->class_dev, ctx->cd_gpio);
+
+ ctx->cd_gpio = NULL;
+}
+EXPORT_SYMBOL(mmc_gpiod_free_cd);
config MMC_SDHCI_BCM_KONA
tristate "SDHCI support on Broadcom KONA platform"
- depends on ARCH_BCM
+ depends on ARCH_BCM_MOBILE
select MMC_SDHCI_PLTFM
help
This selects the Broadcom Kona Secure Digital Host Controller
If unsure, say N.
+config MMC_SDHCI_MSM
+ tristate "Qualcomm SDHCI Controller Support"
+ depends on ARCH_QCOM
+ depends on MMC_SDHCI_PLTFM
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ support present in Qualcomm SOCs. The controller supports
+ SD/MMC/SDIO devices.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
config MMC_MSM
tristate "Qualcomm SDCC Controller Support"
depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on Exynos4 and Exynos5 SoC's.
-config MMC_DW_SOCFPGA
- tristate "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
- depends on MMC_DW && MFD_SYSCON
- select MMC_DW_PLTFM
- help
- This selects support for Altera SoCFPGA specific extensions to the
- Synopsys DesignWare Memory Card Interface driver.
-
config MMC_DW_K3
tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW
obj-$(CONFIG_MMC_DW) += dw_mmc.o
obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o
obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o
-obj-$(CONFIG_MMC_DW_SOCFPGA) += dw_mmc-socfpga.o
obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o
obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
+obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
struct device_node *np;
struct davinci_mmc_config *pdata = pdev->dev.platform_data;
const struct of_device_id *match =
- of_match_device(of_match_ptr(davinci_mmc_dt_ids), &pdev->dev);
+ of_match_device(davinci_mmc_dt_ids, &pdev->dev);
u32 data;
np = pdev->dev.of_node;
.name = "davinci_mmc",
.owner = THIS_MODULE,
.pm = davinci_mmcsd_pm_ops,
- .of_match_table = of_match_ptr(davinci_mmc_dt_ids),
+ .of_match_table = davinci_mmc_dt_ids,
},
.remove = __exit_p(davinci_mmcsd_remove),
.id_table = davinci_mmc_devtype,
return dw_mci_pltfm_register(pdev, drv_data);
}
+#ifdef CONFIG_PM_SLEEP
static int dw_mci_k3_suspend(struct device *dev)
{
struct dw_mci *host = dev_get_drvdata(dev);
return dw_mci_resume(host);
}
+#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume);
#include "dw_mmc.h"
#include "dw_mmc-pltfm.h"
-static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
+static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
{
*cmdr |= SDMMC_CMD_USE_HOLD_REG;
}
static const struct dw_mci_drv_data rockchip_drv_data = {
- .prepare_command = dw_mci_rockchip_prepare_command,
+ .prepare_command = dw_mci_pltfm_prepare_command,
+};
+
+static const struct dw_mci_drv_data socfpga_drv_data = {
+ .prepare_command = dw_mci_pltfm_prepare_command,
};
int dw_mci_pltfm_register(struct platform_device *pdev,
{ .compatible = "snps,dw-mshc", },
{ .compatible = "rockchip,rk2928-dw-mshc",
.data = &rockchip_drv_data },
+ { .compatible = "altr,socfpga-dw-mshc",
+ .data = &socfpga_drv_data },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
.remove = dw_mci_pltfm_remove,
.driver = {
.name = "dw_mmc",
- .of_match_table = of_match_ptr(dw_mci_pltfm_match),
+ .of_match_table = dw_mci_pltfm_match,
.pm = &dw_mci_pltfm_pmops,
},
};
+++ /dev/null
-/*
- * Altera SoCFPGA Specific Extensions for Synopsys DW Multimedia Card Interface
- * driver
- *
- * Copyright (C) 2012, Samsung Electronics Co., Ltd.
- * Copyright (C) 2013 Altera Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Taken from dw_mmc-exynos.c
- */
-#include <linux/clk.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/dw_mmc.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-
-#include "dw_mmc.h"
-#include "dw_mmc-pltfm.h"
-
-#define SYSMGR_SDMMCGRP_CTRL_OFFSET 0x108
-#define DRV_CLK_PHASE_SHIFT_SEL_MASK 0x7
-#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
- ((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0))
-
-/* SOCFPGA implementation specific driver private data */
-struct dw_mci_socfpga_priv_data {
- u8 ciu_div; /* card interface unit divisor */
- u32 hs_timing; /* bitmask for CIU clock phase shift */
- struct regmap *sysreg; /* regmap for system manager register */
-};
-
-static int dw_mci_socfpga_priv_init(struct dw_mci *host)
-{
- return 0;
-}
-
-static int dw_mci_socfpga_setup_clock(struct dw_mci *host)
-{
- struct dw_mci_socfpga_priv_data *priv = host->priv;
-
- clk_disable_unprepare(host->ciu_clk);
- regmap_write(priv->sysreg, SYSMGR_SDMMCGRP_CTRL_OFFSET,
- priv->hs_timing);
- clk_prepare_enable(host->ciu_clk);
-
- host->bus_hz /= (priv->ciu_div + 1);
- return 0;
-}
-
-static void dw_mci_socfpga_prepare_command(struct dw_mci *host, u32 *cmdr)
-{
- struct dw_mci_socfpga_priv_data *priv = host->priv;
-
- if (priv->hs_timing & DRV_CLK_PHASE_SHIFT_SEL_MASK)
- *cmdr |= SDMMC_CMD_USE_HOLD_REG;
-}
-
-static int dw_mci_socfpga_parse_dt(struct dw_mci *host)
-{
- struct dw_mci_socfpga_priv_data *priv;
- struct device_node *np = host->dev->of_node;
- u32 timing[2];
- u32 div = 0;
- int ret;
-
- priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv) {
- dev_err(host->dev, "mem alloc failed for private data\n");
- return -ENOMEM;
- }
-
- priv->sysreg = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
- if (IS_ERR(priv->sysreg)) {
- dev_err(host->dev, "regmap for altr,sys-mgr lookup failed.\n");
- return PTR_ERR(priv->sysreg);
- }
-
- ret = of_property_read_u32(np, "altr,dw-mshc-ciu-div", &div);
- if (ret)
- dev_info(host->dev, "No dw-mshc-ciu-div specified, assuming 1");
- priv->ciu_div = div;
-
- ret = of_property_read_u32_array(np,
- "altr,dw-mshc-sdr-timing", timing, 2);
- if (ret)
- return ret;
-
- priv->hs_timing = SYSMGR_SDMMC_CTRL_SET(timing[0], timing[1]);
- host->priv = priv;
- return 0;
-}
-
-static const struct dw_mci_drv_data socfpga_drv_data = {
- .init = dw_mci_socfpga_priv_init,
- .setup_clock = dw_mci_socfpga_setup_clock,
- .prepare_command = dw_mci_socfpga_prepare_command,
- .parse_dt = dw_mci_socfpga_parse_dt,
-};
-
-static const struct of_device_id dw_mci_socfpga_match[] = {
- { .compatible = "altr,socfpga-dw-mshc",
- .data = &socfpga_drv_data, },
- {},
-};
-MODULE_DEVICE_TABLE(of, dw_mci_socfpga_match);
-
-static int dw_mci_socfpga_probe(struct platform_device *pdev)
-{
- const struct dw_mci_drv_data *drv_data;
- const struct of_device_id *match;
-
- match = of_match_node(dw_mci_socfpga_match, pdev->dev.of_node);
- drv_data = match->data;
- return dw_mci_pltfm_register(pdev, drv_data);
-}
-
-static struct platform_driver dw_mci_socfpga_pltfm_driver = {
- .probe = dw_mci_socfpga_probe,
- .remove = __exit_p(dw_mci_pltfm_remove),
- .driver = {
- .name = "dwmmc_socfpga",
- .of_match_table = dw_mci_socfpga_match,
- .pm = &dw_mci_pltfm_pmops,
- },
-};
-
-module_platform_driver(dw_mci_socfpga_pltfm_driver);
-
-MODULE_DESCRIPTION("Altera SOCFPGA Specific DW-MSHC Driver Extension");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:dwmmc-socfpga");
if (!err) {
if (!data->stop || mrq->sbc) {
- if (mrq->sbc)
+ if (mrq->sbc && data->stop)
data->stop->error = 0;
dw_mci_request_end(host, mrq);
goto unlock;
extern int dw_mci_probe(struct dw_mci *host);
extern void dw_mci_remove(struct dw_mci *host);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
extern int dw_mci_suspend(struct dw_mci *host);
extern int dw_mci_resume(struct dw_mci *host);
#endif
* @prepare_command: handle CMD register extensions.
* @set_ios: handle bus specific extensions.
* @parse_dt: parse implementation specific device tree properties.
+ * @execute_tuning: implementation specific tuning procedure.
*
* Provide controller implementation specific extensions. The usage of this
* data structure is fully optional and usage of each member in this structure
{
void __iomem *base = host->base;
bool sbc = (cmd == host->mrq->sbc);
+ bool busy_resp = host->variant->busy_detect &&
+ (cmd->flags & MMC_RSP_BUSY);
+
+ /* Check if we need to wait for busy completion. */
+ if (host->busy_status && (status & MCI_ST_CARDBUSY))
+ return;
+
+ /* Enable busy completion if needed and supported. */
+ if (!host->busy_status && busy_resp &&
+ !(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) &&
+ (readl(base + MMCISTATUS) & MCI_ST_CARDBUSY)) {
+ writel(readl(base + MMCIMASK0) | MCI_ST_BUSYEND,
+ base + MMCIMASK0);
+ host->busy_status = status & (MCI_CMDSENT|MCI_CMDRESPEND);
+ return;
+ }
+
+ /* At busy completion, mask the IRQ and complete the request. */
+ if (host->busy_status) {
+ writel(readl(base + MMCIMASK0) & ~MCI_ST_BUSYEND,
+ base + MMCIMASK0);
+ host->busy_status = 0;
+ }
host->cmd = NULL;
status &= ~MCI_IRQ1MASK;
}
+ /*
+ * We intentionally clear the MCI_ST_CARDBUSY IRQ here (if it's
+ * enabled) since the HW seems to be triggering the IRQ on both
+ * edges while monitoring DAT0 for busy completion.
+ */
status &= readl(host->base + MMCIMASK0);
writel(status, host->base + MMCICLEAR);
dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
+ cmd = host->cmd;
+ if ((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|
+ MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
+ mmci_cmd_irq(host, cmd, status);
+
data = host->data;
if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND|
MCI_DATABLOCKEND) && data)
mmci_data_irq(host, data, status);
- cmd = host->cmd;
- if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
- mmci_cmd_irq(host, cmd, status);
+ /* Don't poll for busy completion in irq context. */
+ if (host->busy_status)
+ status &= ~MCI_ST_CARDBUSY;
ret = 1;
} while (status);
goto clk_disable;
}
- if (variant->busy_detect) {
- mmci_ops.card_busy = mmci_card_busy;
- mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE);
- }
-
- mmc->ops = &mmci_ops;
/*
* The ARM and ST versions of the block have slightly different
* clock divider equations which means that the minimum divider
mmc->caps = plat->capabilities;
mmc->caps2 = plat->capabilities2;
+ if (variant->busy_detect) {
+ mmci_ops.card_busy = mmci_card_busy;
+ mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE);
+ mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
+ mmc->max_busy_timeout = 0;
+ }
+
+ mmc->ops = &mmci_ops;
+
/* We support these PM capabilities. */
mmc->pm_caps = MMC_PM_KEEP_POWER;
/* Extended status bits for the ST Micro variants */
#define MCI_ST_SDIOITMASK (1 << 22)
#define MCI_ST_CEATAENDMASK (1 << 23)
+#define MCI_ST_BUSYEND (1 << 24)
#define MMCIMASK1 0x040
#define MMCIFIFOCNT 0x048
u32 pwr_reg;
u32 clk_reg;
u32 datactrl_reg;
+ u32 busy_status;
bool vqmmc_enabled;
struct mmci_platform_data *plat;
struct variant_data *variant;
#include <linux/omap-dma.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
u32 dma_rx_burst;
struct dma_chan *dma_tx;
u32 dma_tx_burst;
- struct resource *mem_res;
void __iomem *virt_base;
unsigned int phys_base;
int irq;
u32 total_bytes_left;
unsigned features;
- unsigned use_dma:1;
unsigned brs_received:1, dma_done:1;
unsigned dma_in_use:1;
spinlock_t dma_lock;
u32 cmdreg;
u32 resptype;
u32 cmdtype;
+ u16 irq_mask;
host->cmd = cmd;
OMAP_MMC_WRITE(host, CTO, 200);
OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16);
- OMAP_MMC_WRITE(host, IE,
- OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL |
- OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT |
- OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT |
- OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR |
- OMAP_MMC_STAT_END_OF_DATA);
+ irq_mask = OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL |
+ OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT |
+ OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT |
+ OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR |
+ OMAP_MMC_STAT_END_OF_DATA;
+ if (cmd->opcode == MMC_ERASE)
+ irq_mask &= ~OMAP_MMC_STAT_DATA_TOUT;
+ OMAP_MMC_WRITE(host, IE, irq_mask);
OMAP_MMC_WRITE(host, CMD, cmdreg);
}
mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
{
struct mmc_data *data = req->data;
- int i, use_dma, block_size;
+ int i, use_dma = 1, block_size;
unsigned sg_len;
host->data = data;
sg_len = (data->blocks == 1) ? 1 : data->sg_len;
/* Only do DMA for entire blocks */
- use_dma = host->use_dma;
- if (use_dma) {
- for (i = 0; i < sg_len; i++) {
- if ((data->sg[i].length % block_size) != 0) {
- use_dma = 0;
- break;
- }
+ for (i = 0; i < sg_len; i++) {
+ if ((data->sg[i].length % block_size) != 0) {
+ use_dma = 0;
+ break;
}
}
mmc->caps = 0;
if (host->pdata->slots[id].wires >= 4)
- mmc->caps |= MMC_CAP_4_BIT_DATA;
+ mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_ERASE;
mmc->ops = &mmc_omap_ops;
mmc->f_min = 400000;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
+ if (slot->pdata->get_cover_state != NULL) {
+ setup_timer(&slot->cover_timer, mmc_omap_cover_timer,
+ (unsigned long)slot);
+ tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler,
+ (unsigned long)slot);
+ }
+
r = mmc_add_host(mmc);
if (r < 0)
goto err_remove_host;
&dev_attr_cover_switch);
if (r < 0)
goto err_remove_slot_name;
-
- setup_timer(&slot->cover_timer, mmc_omap_cover_timer,
- (unsigned long)slot);
- tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler,
- (unsigned long)slot);
tasklet_schedule(&slot->cover_tasklet);
}
return -EPROBE_DEFER;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host = devm_kzalloc(&pdev->dev, sizeof(struct mmc_omap_host),
+ GFP_KERNEL);
+ if (host == NULL)
+ return -ENOMEM;
+
irq = platform_get_irq(pdev, 0);
- if (res == NULL || irq < 0)
+ if (irq < 0)
return -ENXIO;
- res = request_mem_region(res->start, resource_size(res),
- pdev->name);
- if (res == NULL)
- return -EBUSY;
-
- host = kzalloc(sizeof(struct mmc_omap_host), GFP_KERNEL);
- if (host == NULL) {
- ret = -ENOMEM;
- goto err_free_mem_region;
- }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->virt_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->virt_base))
+ return PTR_ERR(host->virt_base);
INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);
platform_set_drvdata(pdev, host);
host->id = pdev->id;
- host->mem_res = res;
- host->irq = irq;
- host->use_dma = 1;
host->irq = irq;
- host->phys_base = host->mem_res->start;
- host->virt_base = ioremap(res->start, resource_size(res));
- if (!host->virt_base)
- goto err_ioremap;
-
+ host->phys_base = res->start;
host->iclk = clk_get(&pdev->dev, "ick");
- if (IS_ERR(host->iclk)) {
- ret = PTR_ERR(host->iclk);
- goto err_free_mmc_host;
- }
+ if (IS_ERR(host->iclk))
+ return PTR_ERR(host->iclk);
clk_enable(host->iclk);
host->fclk = clk_get(&pdev->dev, "fck");
err_free_iclk:
clk_disable(host->iclk);
clk_put(host->iclk);
-err_free_mmc_host:
- iounmap(host->virt_base);
-err_ioremap:
- kfree(host);
-err_free_mem_region:
- release_mem_region(res->start, resource_size(res));
return ret;
}
if (host->dma_rx)
dma_release_channel(host->dma_rx);
- iounmap(host->virt_base);
- release_mem_region(pdev->resource[0].start,
- pdev->resource[0].end - pdev->resource[0].start + 1);
destroy_workqueue(host->mmc_omap_wq);
- kfree(host);
-
return 0;
}
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSSTATUS 0x0014
#define OMAP_HSMMC_CON 0x002C
+#define OMAP_HSMMC_SDMASA 0x0100
#define OMAP_HSMMC_BLK 0x0104
#define OMAP_HSMMC_ARG 0x0108
#define OMAP_HSMMC_CMD 0x010C
#define OMAP_HSMMC_STAT 0x0130
#define OMAP_HSMMC_IE 0x0134
#define OMAP_HSMMC_ISE 0x0138
+#define OMAP_HSMMC_AC12 0x013C
#define OMAP_HSMMC_CAPA 0x0140
#define VS18 (1 << 26)
#define DTO_MASK 0x000F0000
#define DTO_SHIFT 16
#define INIT_STREAM (1 << 1)
+#define ACEN_ACMD23 (2 << 2)
#define DP_SELECT (1 << 21)
#define DDIR (1 << 4)
#define DMAE 0x1
#define SRC (1 << 25)
#define SRD (1 << 26)
#define SOFTRESET (1 << 1)
-#define RESETDONE (1 << 0)
/* Interrupt masks for IE and ISE register */
#define CC_EN (1 << 0)
#define DTO_EN (1 << 20)
#define DCRC_EN (1 << 21)
#define DEB_EN (1 << 22)
+#define ACE_EN (1 << 24)
#define CERR_EN (1 << 28)
#define BADA_EN (1 << 29)
-#define INT_EN_MASK (BADA_EN | CERR_EN | DEB_EN | DCRC_EN |\
+#define INT_EN_MASK (BADA_EN | CERR_EN | ACE_EN | DEB_EN | DCRC_EN |\
DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \
BRR_EN | BWR_EN | TC_EN | CC_EN)
+#define CNI (1 << 7)
+#define ACIE (1 << 4)
+#define ACEB (1 << 3)
+#define ACCE (1 << 2)
+#define ACTO (1 << 1)
+#define ACNE (1 << 0)
+
#define MMC_AUTOSUSPEND_DELAY 100
#define MMC_TIMEOUT_MS 20 /* 20 mSec */
#define MMC_TIMEOUT_US 20000 /* 20000 micro Sec */
#define OMAP_MMC_MAX_CLOCK 52000000
#define DRIVER_NAME "omap_hsmmc"
+#define VDD_1V8 1800000 /* 180000 uV */
+#define VDD_3V0 3000000 /* 300000 uV */
+#define VDD_165_195 (ffs(MMC_VDD_165_195) - 1)
+
+#define AUTO_CMD23 (1 << 1) /* Auto CMD23 support */
/*
* One controller can have multiple slots, like on some omap boards using
* omap.c controller driver. Luckily this is not currently done on any known
*/
struct regulator *vcc;
struct regulator *vcc_aux;
- int pbias_disable;
+ struct regulator *pbias;
+ bool pbias_enabled;
void __iomem *base;
resource_size_t mapbase;
spinlock_t irq_lock; /* Prevent races with irq handler */
int reqs_blocked;
int use_reg;
int req_in_progress;
+ unsigned long clk_rate;
+ unsigned int flags;
struct omap_hsmmc_next next_data;
struct omap_mmc_platform_data *pdata;
};
+struct omap_mmc_of_data {
+ u32 reg_offset;
+ u8 controller_flags;
+};
+
+static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host);
+
static int omap_hsmmc_card_detect(struct device *dev, int slot)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
*/
if (!host->vcc)
return 0;
- /*
- * With DT, never turn OFF the regulator for MMC1. This is because
- * the pbias cell programming support is still missing when
- * booting with Device tree
- */
- if (host->pbias_disable && !vdd)
- return 0;
if (mmc_slot(host).before_set_reg)
mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
+ if (host->pbias) {
+ if (host->pbias_enabled == 1) {
+ ret = regulator_disable(host->pbias);
+ if (!ret)
+ host->pbias_enabled = 0;
+ }
+ regulator_set_voltage(host->pbias, VDD_3V0, VDD_3V0);
+ }
+
/*
* Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
- ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
+ if (host->vcc)
+ ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
/* Enable interface voltage rail, if needed */
if (ret == 0 && host->vcc_aux) {
ret = regulator_enable(host->vcc_aux);
- if (ret < 0)
+ if (ret < 0 && host->vcc)
ret = mmc_regulator_set_ocr(host->mmc,
host->vcc, 0);
}
/* Shut down the rail */
if (host->vcc_aux)
ret = regulator_disable(host->vcc_aux);
- if (!ret) {
+ if (host->vcc) {
/* Then proceed to shut down the local regulator */
ret = mmc_regulator_set_ocr(host->mmc,
host->vcc, 0);
}
}
+ if (host->pbias) {
+ if (vdd <= VDD_165_195)
+ ret = regulator_set_voltage(host->pbias, VDD_1V8,
+ VDD_1V8);
+ else
+ ret = regulator_set_voltage(host->pbias, VDD_3V0,
+ VDD_3V0);
+ if (ret < 0)
+ goto error_set_power;
+
+ if (host->pbias_enabled == 0) {
+ ret = regulator_enable(host->pbias);
+ if (!ret)
+ host->pbias_enabled = 1;
+ }
+ }
+
if (mmc_slot(host).after_set_reg)
mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
+error_set_power:
return ret;
}
struct regulator *reg;
int ocr_value = 0;
- reg = regulator_get(host->dev, "vmmc");
+ reg = devm_regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
- dev_err(host->dev, "vmmc regulator missing\n");
+ dev_err(host->dev, "unable to get vmmc regulator %ld\n",
+ PTR_ERR(reg));
return PTR_ERR(reg);
} else {
- mmc_slot(host).set_power = omap_hsmmc_set_power;
host->vcc = reg;
ocr_value = mmc_regulator_get_ocrmask(reg);
if (!mmc_slot(host).ocr_mask) {
return -EINVAL;
}
}
+ }
+ mmc_slot(host).set_power = omap_hsmmc_set_power;
- /* Allow an aux regulator */
- reg = regulator_get(host->dev, "vmmc_aux");
- host->vcc_aux = IS_ERR(reg) ? NULL : reg;
+ /* Allow an aux regulator */
+ reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
+ host->vcc_aux = IS_ERR(reg) ? NULL : reg;
- /* For eMMC do not power off when not in sleep state */
- if (mmc_slot(host).no_regulator_off_init)
- return 0;
- /*
- * UGLY HACK: workaround regulator framework bugs.
- * When the bootloader leaves a supply active, it's
- * initialized with zero usecount ... and we can't
- * disable it without first enabling it. Until the
- * framework is fixed, we need a workaround like this
- * (which is safe for MMC, but not in general).
- */
- if (regulator_is_enabled(host->vcc) > 0 ||
- (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
- int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+ reg = devm_regulator_get_optional(host->dev, "pbias");
+ host->pbias = IS_ERR(reg) ? NULL : reg;
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 1, vdd);
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 0, 0);
- }
+ /* For eMMC do not power off when not in sleep state */
+ if (mmc_slot(host).no_regulator_off_init)
+ return 0;
+ /*
+ * To disable boot_on regulator, enable regulator
+ * to increase usecount and then disable it.
+ */
+ if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
+ (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
+ int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+
+ mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+ mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
}
return 0;
static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
{
- regulator_put(host->vcc);
- regulator_put(host->vcc_aux);
mmc_slot(host).set_power = NULL;
}
u32 hctl, capa;
unsigned long timeout;
- if (!OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE)
- return 1;
-
if (host->con == OMAP_HSMMC_READ(host->base, CON) &&
host->hctl == OMAP_HSMMC_READ(host->base, HCTL) &&
host->sysctl == OMAP_HSMMC_READ(host->base, SYSCTL) &&
cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
+ if ((host->flags & AUTO_CMD23) && mmc_op_multi(cmd->opcode) &&
+ host->mrq->sbc) {
+ cmdreg |= ACEN_ACMD23;
+ OMAP_HSMMC_WRITE(host->base, SDMASA, host->mrq->sbc->arg);
+ }
if (data) {
cmdreg |= DP_SELECT | MSBS | BCE;
if (data->flags & MMC_DATA_READ)
else
data->bytes_xfered = 0;
- if (!data->stop) {
+ if (data->stop && (data->error || !host->mrq->sbc))
+ omap_hsmmc_start_command(host, data->stop, NULL);
+ else
omap_hsmmc_request_done(host, data->mrq);
- return;
- }
- omap_hsmmc_start_command(host, data->stop, NULL);
}
/*
{
host->cmd = NULL;
+ if (host->mrq->sbc && (host->cmd == host->mrq->sbc) &&
+ !host->mrq->sbc->error && !(host->flags & AUTO_CMD23)) {
+ omap_hsmmc_start_dma_transfer(host);
+ omap_hsmmc_start_command(host, host->mrq->cmd,
+ host->mrq->data);
+ return;
+ }
+
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
/* response type 2 */
}
}
if ((host->data == NULL && !host->response_busy) || cmd->error)
- omap_hsmmc_request_done(host, cmd->mrq);
+ omap_hsmmc_request_done(host, host->mrq);
}
/*
{
struct mmc_data *data;
int end_cmd = 0, end_trans = 0;
+ int error = 0;
data = host->data;
dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
else if (status & (CCRC_EN | DCRC_EN))
hsmmc_command_incomplete(host, -EILSEQ, end_cmd);
+ if (status & ACE_EN) {
+ u32 ac12;
+ ac12 = OMAP_HSMMC_READ(host->base, AC12);
+ if (!(ac12 & ACNE) && host->mrq->sbc) {
+ end_cmd = 1;
+ if (ac12 & ACTO)
+ error = -ETIMEDOUT;
+ else if (ac12 & (ACCE | ACEB | ACIE))
+ error = -EILSEQ;
+ host->mrq->sbc->error = error;
+ hsmmc_command_incomplete(host, error, end_cmd);
+ }
+ dev_dbg(mmc_dev(host->mmc), "AC12 err: 0x%x\n", ac12);
+ }
if (host->data || host->response_busy) {
end_trans = !end_cmd;
host->response_busy = 0;
}
/* Check if next job is already prepared */
- if (next ||
- (!next && data->host_cookie != host->next_data.cookie)) {
+ if (next || data->host_cookie != host->next_data.cookie) {
dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len,
omap_hsmmc_get_dma_dir(host, data));
/*
* Routine to configure and start DMA for the MMC card
*/
-static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host,
+static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host,
struct mmc_request *req)
{
struct dma_slave_config cfg;
host->dma_ch = 1;
- dma_async_issue_pending(chan);
-
return 0;
}
if (clkd == 0)
clkd = 1;
- cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
+ cycle_ns = 1000000000 / (host->clk_rate / clkd);
timeout = timeout_ns / cycle_ns;
timeout += timeout_clks;
if (timeout) {
OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
}
+static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host)
+{
+ struct mmc_request *req = host->mrq;
+ struct dma_chan *chan;
+
+ if (!req->data)
+ return;
+ OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
+ | (req->data->blocks << 16));
+ set_data_timeout(host, req->data->timeout_ns,
+ req->data->timeout_clks);
+ chan = omap_hsmmc_get_dma_chan(host, req->data);
+ dma_async_issue_pending(chan);
+}
+
/*
* Configure block length for MMC/SD cards and initiate the transfer.
*/
return 0;
}
- OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
- | (req->data->blocks << 16));
- set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks);
-
if (host->use_dma) {
- ret = omap_hsmmc_start_dma_transfer(host, req);
+ ret = omap_hsmmc_setup_dma_transfer(host, req);
if (ret != 0) {
dev_err(mmc_dev(host->mmc), "MMC start dma failure\n");
return ret;
host->reqs_blocked = 0;
WARN_ON(host->mrq != NULL);
host->mrq = req;
+ host->clk_rate = clk_get_rate(host->fclk);
err = omap_hsmmc_prepare_data(host, req);
if (err) {
req->cmd->error = err;
mmc_request_done(mmc, req);
return;
}
+ if (req->sbc && !(host->flags & AUTO_CMD23)) {
+ omap_hsmmc_start_command(host, req->sbc, NULL);
+ return;
+ }
+ omap_hsmmc_start_dma_transfer(host);
omap_hsmmc_start_command(host, req->cmd, req->data);
}
* of external transceiver; but they all handle 1.8V.
*/
if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
- (ios->vdd == DUAL_VOLT_OCR_BIT) &&
- /*
- * With pbias cell programming missing, this
- * can't be allowed on MMC1 when booting with device
- * tree.
- */
- !host->pbias_disable) {
+ (ios->vdd == DUAL_VOLT_OCR_BIT)) {
/*
* The mmc_select_voltage fn of the core does
* not seem to set the power_mode to
#endif
#ifdef CONFIG_OF
-static u16 omap4_reg_offset = 0x100;
+static const struct omap_mmc_of_data omap3_pre_es3_mmc_of_data = {
+ /* See 35xx errata 2.1.1.128 in SPRZ278F */
+ .controller_flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
+};
+
+static const struct omap_mmc_of_data omap4_mmc_of_data = {
+ .reg_offset = 0x100,
+};
static const struct of_device_id omap_mmc_of_match[] = {
{
.compatible = "ti,omap2-hsmmc",
},
+ {
+ .compatible = "ti,omap3-pre-es3-hsmmc",
+ .data = &omap3_pre_es3_mmc_of_data,
+ },
{
.compatible = "ti,omap3-hsmmc",
},
{
.compatible = "ti,omap4-hsmmc",
- .data = &omap4_reg_offset,
+ .data = &omap4_mmc_of_data,
},
{},
};
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
- return NULL; /* out of memory */
+ return ERR_PTR(-ENOMEM); /* out of memory */
if (of_find_property(np, "ti,dual-volt", NULL))
pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
+ if (of_find_property(np, "keep-power-in-suspend", NULL))
+ pdata->slots[0].pm_caps |= MMC_PM_KEEP_POWER;
+
+ if (of_find_property(np, "enable-sdio-wakeup", NULL))
+ pdata->slots[0].pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+
return pdata;
}
#else
static inline struct omap_mmc_platform_data
*of_get_hsmmc_pdata(struct device *dev)
{
- return NULL;
+ return ERR_PTR(-EINVAL);
}
#endif
dma_cap_mask_t mask;
unsigned tx_req, rx_req;
struct pinctrl *pinctrl;
+ const struct omap_mmc_of_data *data;
match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
if (match) {
return PTR_ERR(pdata);
if (match->data) {
- const u16 *offsetp = match->data;
- pdata->reg_offset = *offsetp;
+ data = match->data;
+ pdata->reg_offset = data->reg_offset;
+ pdata->controller_flags |= data->controller_flags;
}
}
host->base = ioremap(host->mapbase, SZ_4K);
host->power_mode = MMC_POWER_OFF;
host->next_data.cookie = 1;
+ host->pbias_enabled = 0;
platform_set_drvdata(pdev, host);
omap_hsmmc_context_save(host);
- /* This can be removed once we support PBIAS with DT */
- if (host->dev->of_node && res->start == 0x4809c000)
- host->pbias_disable = 1;
-
host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
/*
* MMC can still work without debounce clock.
#include <linux/mfd/rtsx_pci.h>
#include <asm/unaligned.h>
-/* SD Tuning Data Structure
- * Record continuous timing phase path
- */
-struct timing_phase_path {
- int start;
- int end;
- int mid;
- int len;
+struct realtek_next {
+ unsigned int sg_count;
+ s32 cookie;
};
struct realtek_pci_sdmmc {
struct rtsx_pcr *pcr;
struct mmc_host *mmc;
struct mmc_request *mrq;
-
- struct mutex host_mutex;
-
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+
+ spinlock_t lock;
+ struct timer_list timer;
+ struct tasklet_struct cmd_tasklet;
+ struct tasklet_struct data_tasklet;
+ struct tasklet_struct finish_tasklet;
+
+ u8 rsp_type;
+ u8 rsp_len;
+ int sg_count;
u8 ssc_depth;
unsigned int clock;
bool vpclk;
int power_state;
#define SDMMC_POWER_ON 1
#define SDMMC_POWER_OFF 0
+
+ struct realtek_next next_data;
};
+static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
+ struct mmc_request *mrq);
+
static inline struct device *sdmmc_dev(struct realtek_pci_sdmmc *host)
{
return &(host->pdev->dev);
#define sd_print_debug_regs(host)
#endif /* DEBUG */
+static void sd_isr_done_transfer(struct platform_device *pdev)
+{
+ struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
+
+ spin_lock(&host->lock);
+ if (host->cmd)
+ tasklet_schedule(&host->cmd_tasklet);
+ if (host->data)
+ tasklet_schedule(&host->data_tasklet);
+ spin_unlock(&host->lock);
+}
+
+static void sd_request_timeout(unsigned long host_addr)
+{
+ struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!host->mrq) {
+ dev_err(sdmmc_dev(host), "error: no request exist\n");
+ goto out;
+ }
+
+ if (host->cmd)
+ host->cmd->error = -ETIMEDOUT;
+ if (host->data)
+ host->data->error = -ETIMEDOUT;
+
+ dev_dbg(sdmmc_dev(host), "timeout for request\n");
+
+out:
+ tasklet_schedule(&host->finish_tasklet);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void sd_finish_request(unsigned long host_addr)
+{
+ struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr;
+ struct rtsx_pcr *pcr = host->pcr;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ unsigned long flags;
+ bool any_error;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ del_timer(&host->timer);
+ mrq = host->mrq;
+ if (!mrq) {
+ dev_err(sdmmc_dev(host), "error: no request need finish\n");
+ goto out;
+ }
+
+ cmd = mrq->cmd;
+ data = mrq->data;
+
+ any_error = (mrq->sbc && mrq->sbc->error) ||
+ (mrq->stop && mrq->stop->error) ||
+ (cmd && cmd->error) || (data && data->error);
+
+ if (any_error) {
+ rtsx_pci_stop_cmd(pcr);
+ sd_clear_error(host);
+ }
+
+ if (data) {
+ if (any_error)
+ data->bytes_xfered = 0;
+ else
+ data->bytes_xfered = data->blocks * data->blksz;
+
+ if (!data->host_cookie)
+ rtsx_pci_dma_unmap_sg(pcr, data->sg, data->sg_len,
+ data->flags & MMC_DATA_READ);
+
+ }
+
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+ mutex_unlock(&pcr->pcr_mutex);
+ mmc_request_done(host->mmc, mrq);
+}
+
static int sd_read_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
u8 *buf, int buf_len, int timeout)
{
return 0;
}
-static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
- struct mmc_command *cmd)
+static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd)
{
struct rtsx_pcr *pcr = host->pcr;
u8 cmd_idx = (u8)cmd->opcode;
int err = 0;
int timeout = 100;
int i;
- u8 *ptr;
- int stat_idx = 0;
u8 rsp_type;
int rsp_len = 5;
- bool clock_toggled = false;
+ unsigned long flags;
+
+ if (host->cmd)
+ dev_err(sdmmc_dev(host), "error: cmd already exist\n");
+
+ host->cmd = cmd;
dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
__func__, cmd_idx, arg);
err = -EINVAL;
goto out;
}
+ host->rsp_type = rsp_type;
+ host->rsp_len = rsp_len;
if (rsp_type == SD_RSP_TYPE_R1b)
timeout = 3000;
0xFF, SD_CLK_TOGGLE_EN);
if (err < 0)
goto out;
-
- clock_toggled = true;
}
rtsx_pci_init_cmd(pcr);
/* Read data from ping-pong buffer */
for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++)
rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
- stat_idx = 16;
} else if (rsp_type != SD_RSP_TYPE_R0) {
/* Read data from SD_CMDx registers */
for (i = SD_CMD0; i <= SD_CMD4; i++)
rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
- stat_idx = 5;
}
rtsx_pci_add_cmd(pcr, READ_REG_CMD, SD_STAT1, 0, 0);
- err = rtsx_pci_send_cmd(pcr, timeout);
- if (err < 0) {
- sd_print_debug_regs(host);
- sd_clear_error(host);
- dev_dbg(sdmmc_dev(host),
- "rtsx_pci_send_cmd error (err = %d)\n", err);
+ mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout));
+
+ spin_lock_irqsave(&pcr->lock, flags);
+ pcr->trans_result = TRANS_NOT_READY;
+ rtsx_pci_send_cmd_no_wait(pcr);
+ spin_unlock_irqrestore(&pcr->lock, flags);
+
+ return;
+
+out:
+ cmd->error = err;
+ tasklet_schedule(&host->finish_tasklet);
+}
+
+static void sd_get_rsp(unsigned long host_addr)
+{
+ struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr;
+ struct rtsx_pcr *pcr = host->pcr;
+ struct mmc_command *cmd;
+ int i, err = 0, stat_idx;
+ u8 *ptr, rsp_type;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ cmd = host->cmd;
+ host->cmd = NULL;
+
+ if (!cmd) {
+ dev_err(sdmmc_dev(host), "error: cmd not exist\n");
goto out;
}
+ spin_lock(&pcr->lock);
+ if (pcr->trans_result == TRANS_NO_DEVICE)
+ err = -ENODEV;
+ else if (pcr->trans_result != TRANS_RESULT_OK)
+ err = -EINVAL;
+ spin_unlock(&pcr->lock);
+
+ if (err < 0)
+ goto out;
+
+ rsp_type = host->rsp_type;
+ stat_idx = host->rsp_len;
+
if (rsp_type == SD_RSP_TYPE_R0) {
err = 0;
goto out;
cmd->resp[0]);
}
+ if (cmd == host->mrq->sbc) {
+ sd_send_cmd(host, host->mrq->cmd);
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+ if (cmd == host->mrq->stop)
+ goto out;
+
+ if (cmd->data) {
+ sd_start_multi_rw(host, host->mrq);
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
out:
cmd->error = err;
- if (err && clock_toggled)
- rtsx_pci_write_register(pcr, SD_BUS_STAT,
- SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
+ tasklet_schedule(&host->finish_tasklet);
+ spin_unlock_irqrestore(&host->lock, flags);
}
-static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
+static int sd_pre_dma_transfer(struct realtek_pci_sdmmc *host,
+ struct mmc_data *data, struct realtek_next *next)
+{
+ struct rtsx_pcr *pcr = host->pcr;
+ int read = data->flags & MMC_DATA_READ;
+ int sg_count = 0;
+
+ if (!next && data->host_cookie &&
+ data->host_cookie != host->next_data.cookie) {
+ dev_err(sdmmc_dev(host),
+ "error: invalid cookie data[%d] host[%d]\n",
+ data->host_cookie, host->next_data.cookie);
+ data->host_cookie = 0;
+ }
+
+ if (next || (!next && data->host_cookie != host->next_data.cookie))
+ sg_count = rtsx_pci_dma_map_sg(pcr,
+ data->sg, data->sg_len, read);
+ else
+ sg_count = host->next_data.sg_count;
+
+ if (next) {
+ next->sg_count = sg_count;
+ if (++next->cookie < 0)
+ next->cookie = 1;
+ data->host_cookie = next->cookie;
+ }
+
+ return sg_count;
+}
+
+static void sdmmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
+ bool is_first_req)
+{
+ struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+ struct mmc_data *data = mrq->data;
+
+ if (data->host_cookie) {
+ dev_err(sdmmc_dev(host),
+ "error: descard already cookie data[%d]\n",
+ data->host_cookie);
+ data->host_cookie = 0;
+ }
+
+ dev_dbg(sdmmc_dev(host), "dma sg prepared: %d\n",
+ sd_pre_dma_transfer(host, data, &host->next_data));
+}
+
+static void sdmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
+ int err)
+{
+ struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+ struct rtsx_pcr *pcr = host->pcr;
+ struct mmc_data *data = mrq->data;
+ int read = data->flags & MMC_DATA_READ;
+
+ rtsx_pci_dma_unmap_sg(pcr, data->sg, data->sg_len, read);
+ data->host_cookie = 0;
+}
+
+static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
+ struct mmc_request *mrq)
{
struct rtsx_pcr *pcr = host->pcr;
struct mmc_host *mmc = host->mmc;
struct mmc_card *card = mmc->card;
struct mmc_data *data = mrq->data;
int uhs = mmc_card_uhs(card);
- int read = (data->flags & MMC_DATA_READ) ? 1 : 0;
+ int read = data->flags & MMC_DATA_READ;
u8 cfg2, trans_mode;
int err;
size_t data_len = data->blksz * data->blocks;
+ if (host->data)
+ dev_err(sdmmc_dev(host), "error: data already exist\n");
+
+ host->data = data;
+
if (read) {
cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0;
rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
SD_TRANSFER_END, SD_TRANSFER_END);
+ mod_timer(&host->timer, jiffies + 10 * HZ);
rtsx_pci_send_cmd_no_wait(pcr);
- err = rtsx_pci_transfer_data(pcr, data->sg, data->sg_len, read, 10000);
+ err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read);
if (err < 0) {
- sd_clear_error(host);
- return err;
+ data->error = err;
+ tasklet_schedule(&host->finish_tasklet);
}
-
return 0;
}
+static void sd_finish_multi_rw(unsigned long host_addr)
+{
+ struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr;
+ struct rtsx_pcr *pcr = host->pcr;
+ struct mmc_data *data;
+ int err = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!host->data) {
+ dev_err(sdmmc_dev(host), "error: no data exist\n");
+ goto out;
+ }
+
+ data = host->data;
+ host->data = NULL;
+
+ if (pcr->trans_result == TRANS_NO_DEVICE)
+ err = -ENODEV;
+ else if (pcr->trans_result != TRANS_RESULT_OK)
+ err = -EINVAL;
+
+ if (err < 0) {
+ data->error = err;
+ goto out;
+ }
+
+ if (!host->mrq->sbc && data->stop) {
+ sd_send_cmd(host, data->stop);
+ spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+
+out:
+ tasklet_schedule(&host->finish_tasklet);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host)
{
rtsx_pci_write_register(host->pcr, SD_CFG1,
return 0;
}
-static u8 sd_search_final_phase(struct realtek_pci_sdmmc *host, u32 phase_map)
+static inline u32 test_phase_bit(u32 phase_map, unsigned int bit)
{
- struct timing_phase_path path[MAX_PHASE + 1];
- int i, j, cont_path_cnt;
- int new_block, max_len, final_path_idx;
- u8 final_phase = 0xFF;
+ bit %= RTSX_PHASE_MAX;
+ return phase_map & (1 << bit);
+}
- /* Parse phase_map, take it as a bit-ring */
- cont_path_cnt = 0;
- new_block = 1;
- j = 0;
- for (i = 0; i < MAX_PHASE + 1; i++) {
- if (phase_map & (1 << i)) {
- if (new_block) {
- new_block = 0;
- j = cont_path_cnt++;
- path[j].start = i;
- path[j].end = i;
- } else {
- path[j].end = i;
- }
- } else {
- new_block = 1;
- if (cont_path_cnt) {
- /* Calculate path length and middle point */
- int idx = cont_path_cnt - 1;
- path[idx].len =
- path[idx].end - path[idx].start + 1;
- path[idx].mid =
- path[idx].start + path[idx].len / 2;
- }
- }
- }
+static int sd_get_phase_len(u32 phase_map, unsigned int start_bit)
+{
+ int i;
- if (cont_path_cnt == 0) {
- dev_dbg(sdmmc_dev(host), "No continuous phase path\n");
- goto finish;
- } else {
- /* Calculate last continuous path length and middle point */
- int idx = cont_path_cnt - 1;
- path[idx].len = path[idx].end - path[idx].start + 1;
- path[idx].mid = path[idx].start + path[idx].len / 2;
+ for (i = 0; i < RTSX_PHASE_MAX; i++) {
+ if (test_phase_bit(phase_map, start_bit + i) == 0)
+ return i;
}
+ return RTSX_PHASE_MAX;
+}
+
+static u8 sd_search_final_phase(struct realtek_pci_sdmmc *host, u32 phase_map)
+{
+ int start = 0, len = 0;
+ int start_final = 0, len_final = 0;
+ u8 final_phase = 0xFF;
- /* Connect the first and last continuous paths if they are adjacent */
- if (!path[0].start && (path[cont_path_cnt - 1].end == MAX_PHASE)) {
- /* Using negative index */
- path[0].start = path[cont_path_cnt - 1].start - MAX_PHASE - 1;
- path[0].len += path[cont_path_cnt - 1].len;
- path[0].mid = path[0].start + path[0].len / 2;
- /* Convert negative middle point index to positive one */
- if (path[0].mid < 0)
- path[0].mid += MAX_PHASE + 1;
- cont_path_cnt--;
+ if (phase_map == 0) {
+ dev_err(sdmmc_dev(host), "phase error: [map:%x]\n", phase_map);
+ return final_phase;
}
- /* Choose the longest continuous phase path */
- max_len = 0;
- final_phase = 0;
- final_path_idx = 0;
- for (i = 0; i < cont_path_cnt; i++) {
- if (path[i].len > max_len) {
- max_len = path[i].len;
- final_phase = (u8)path[i].mid;
- final_path_idx = i;
+ while (start < RTSX_PHASE_MAX) {
+ len = sd_get_phase_len(phase_map, start);
+ if (len_final < len) {
+ start_final = start;
+ len_final = len;
}
-
- dev_dbg(sdmmc_dev(host), "path[%d].start = %d\n",
- i, path[i].start);
- dev_dbg(sdmmc_dev(host), "path[%d].end = %d\n",
- i, path[i].end);
- dev_dbg(sdmmc_dev(host), "path[%d].len = %d\n",
- i, path[i].len);
- dev_dbg(sdmmc_dev(host), "path[%d].mid = %d\n",
- i, path[i].mid);
+ start += len ? len : 1;
}
-finish:
- dev_dbg(sdmmc_dev(host), "Final chosen phase: %d\n", final_phase);
+ final_phase = (start_final + len_final / 2) % RTSX_PHASE_MAX;
+ dev_dbg(sdmmc_dev(host), "phase: [map:%x] [maxlen:%d] [final:%d]\n",
+ phase_map, len_final, final_phase);
+
return final_phase;
}
int err, i;
u32 raw_phase_map = 0;
- for (i = MAX_PHASE; i >= 0; i--) {
+ for (i = 0; i < RTSX_PHASE_MAX; i++) {
err = sd_tuning_rx_cmd(host, opcode, (u8)i);
if (err == 0)
raw_phase_map |= 1 << i;
return 0;
}
+static inline bool sd_use_muti_rw(struct mmc_command *cmd)
+{
+ return mmc_op_multi(cmd->opcode) ||
+ (cmd->opcode == MMC_READ_SINGLE_BLOCK) ||
+ (cmd->opcode == MMC_WRITE_BLOCK);
+}
+
static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct realtek_pci_sdmmc *host = mmc_priv(mmc);
struct mmc_data *data = mrq->data;
unsigned int data_size = 0;
int err;
+ unsigned long flags;
+
+ mutex_lock(&pcr->pcr_mutex);
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->mrq)
+ dev_err(sdmmc_dev(host), "error: request already exist\n");
+ host->mrq = mrq;
if (host->eject) {
cmd->error = -ENOMEDIUM;
goto finish;
}
- mutex_lock(&pcr->pcr_mutex);
-
rtsx_pci_start_run(pcr);
rtsx_pci_switch_clock(pcr, host->clock, host->ssc_depth,
rtsx_pci_write_register(pcr, CARD_SHARE_MODE,
CARD_SHARE_MASK, CARD_SHARE_48_SD);
- mutex_lock(&host->host_mutex);
- host->mrq = mrq;
- mutex_unlock(&host->host_mutex);
-
if (mrq->data)
data_size = data->blocks * data->blksz;
- if (!data_size || mmc_op_multi(cmd->opcode) ||
- (cmd->opcode == MMC_READ_SINGLE_BLOCK) ||
- (cmd->opcode == MMC_WRITE_BLOCK)) {
- sd_send_cmd_get_rsp(host, cmd);
-
- if (!cmd->error && data_size) {
- sd_rw_multi(host, mrq);
+ if (sd_use_muti_rw(cmd))
+ host->sg_count = sd_pre_dma_transfer(host, data, NULL);
- if (mmc_op_multi(cmd->opcode) && mrq->stop)
- sd_send_cmd_get_rsp(host, mrq->stop);
- }
+ if (!data_size || sd_use_muti_rw(cmd)) {
+ if (mrq->sbc)
+ sd_send_cmd(host, mrq->sbc);
+ else
+ sd_send_cmd(host, cmd);
+ spin_unlock_irqrestore(&host->lock, flags);
} else {
+ spin_unlock_irqrestore(&host->lock, flags);
sd_normal_rw(host, mrq);
+ tasklet_schedule(&host->finish_tasklet);
}
-
- if (mrq->data) {
- if (cmd->error || data->error)
- data->bytes_xfered = 0;
- else
- data->bytes_xfered = data->blocks * data->blksz;
- }
-
- mutex_unlock(&pcr->pcr_mutex);
+ return;
finish:
- if (cmd->error)
- dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error);
-
- mutex_lock(&host->host_mutex);
- host->mrq = NULL;
- mutex_unlock(&host->host_mutex);
-
- mmc_request_done(mmc, mrq);
+ tasklet_schedule(&host->finish_tasklet);
+ spin_unlock_irqrestore(&host->lock, flags);
}
static int sd_set_bus_width(struct realtek_pci_sdmmc *host,
}
static const struct mmc_host_ops realtek_pci_sdmmc_ops = {
+ .pre_req = sdmmc_pre_req,
+ .post_req = sdmmc_post_req,
.request = sdmmc_request,
.set_ios = sdmmc_set_ios,
.get_ro = sdmmc_get_ro,
struct realtek_pci_sdmmc *host;
struct rtsx_pcr *pcr;
struct pcr_handle *handle = pdev->dev.platform_data;
+ unsigned long host_addr;
if (!handle)
return -ENXIO;
pcr->slots[RTSX_SD_CARD].p_dev = pdev;
pcr->slots[RTSX_SD_CARD].card_event = rtsx_pci_sdmmc_card_event;
- mutex_init(&host->host_mutex);
+ host_addr = (unsigned long)host;
+ host->next_data.cookie = 1;
+ setup_timer(&host->timer, sd_request_timeout, host_addr);
+ tasklet_init(&host->cmd_tasklet, sd_get_rsp, host_addr);
+ tasklet_init(&host->data_tasklet, sd_finish_multi_rw, host_addr);
+ tasklet_init(&host->finish_tasklet, sd_finish_request, host_addr);
+ spin_lock_init(&host->lock);
+ pcr->slots[RTSX_SD_CARD].done_transfer = sd_isr_done_transfer;
realtek_init_host(host);
mmc_add_host(mmc);
struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
struct rtsx_pcr *pcr;
struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ unsigned long flags;
if (!host)
return 0;
pcr = host->pcr;
pcr->slots[RTSX_SD_CARD].p_dev = NULL;
pcr->slots[RTSX_SD_CARD].card_event = NULL;
+ pcr->slots[RTSX_SD_CARD].done_transfer = NULL;
mmc = host->mmc;
- host->eject = true;
+ mrq = host->mrq;
- mutex_lock(&host->host_mutex);
+ spin_lock_irqsave(&host->lock, flags);
if (host->mrq) {
dev_dbg(&(pdev->dev),
"%s: Controller removed during transfer\n",
mmc_hostname(mmc));
- rtsx_pci_complete_unfinished_transfer(pcr);
+ if (mrq->sbc)
+ mrq->sbc->error = -ENOMEDIUM;
+ if (mrq->cmd)
+ mrq->cmd->error = -ENOMEDIUM;
+ if (mrq->stop)
+ mrq->stop->error = -ENOMEDIUM;
+ if (mrq->data)
+ mrq->data->error = -ENOMEDIUM;
- host->mrq->cmd->error = -ENOMEDIUM;
- if (host->mrq->stop)
- host->mrq->stop->error = -ENOMEDIUM;
- mmc_request_done(mmc, host->mrq);
+ tasklet_schedule(&host->finish_tasklet);
}
- mutex_unlock(&host->host_mutex);
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ del_timer_sync(&host->timer);
+ tasklet_kill(&host->cmd_tasklet);
+ tasklet_kill(&host->data_tasklet);
+ tasklet_kill(&host->finish_tasklet);
mmc_remove_host(mmc);
+ host->eject = true;
+
mmc_free_host(mmc);
dev_dbg(&(pdev->dev),
#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/err.h>
-#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/acpi.h>
#include <linux/pm.h>
#include <linux/mmc/host.h>
#include <linux/mmc/pm.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/mmc/sdhci.h>
#include "sdhci.h"
enum {
- SDHCI_ACPI_SD_CD = BIT(0),
- SDHCI_ACPI_RUNTIME_PM = BIT(1),
+ SDHCI_ACPI_SD_CD = BIT(0),
+ SDHCI_ACPI_RUNTIME_PM = BIT(1),
+ SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL = BIT(2),
};
struct sdhci_acpi_chip {
};
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
+ .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
.caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
.flags = SDHCI_ACPI_RUNTIME_PM,
};
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
- .flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_RUNTIME_PM,
+ .flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
+ SDHCI_ACPI_RUNTIME_PM,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
};
static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = {
{ "80860F14" , "1" , &sdhci_acpi_slot_int_emmc },
{ "80860F14" , "3" , &sdhci_acpi_slot_int_sd },
+ { "80860F16" , NULL, &sdhci_acpi_slot_int_sd },
{ "INT33BB" , "2" , &sdhci_acpi_slot_int_sdio },
{ "INT33C6" , NULL, &sdhci_acpi_slot_int_sdio },
{ "INT3436" , NULL, &sdhci_acpi_slot_int_sdio },
static const struct acpi_device_id sdhci_acpi_ids[] = {
{ "80860F14" },
+ { "80860F16" },
{ "INT33BB" },
{ "INT33C6" },
{ "INT3436" },
return slot;
}
-#ifdef CONFIG_PM_RUNTIME
-
-static irqreturn_t sdhci_acpi_sd_cd(int irq, void *dev_id)
-{
- mmc_detect_change(dev_id, msecs_to_jiffies(200));
- return IRQ_HANDLED;
-}
-
-static int sdhci_acpi_add_own_cd(struct device *dev, struct mmc_host *mmc)
-{
- struct gpio_desc *desc;
- unsigned long flags;
- int err, irq;
-
- desc = devm_gpiod_get_index(dev, "sd_cd", 0);
- if (IS_ERR(desc)) {
- err = PTR_ERR(desc);
- goto out;
- }
-
- err = gpiod_direction_input(desc);
- if (err)
- goto out_free;
-
- irq = gpiod_to_irq(desc);
- if (irq < 0) {
- err = irq;
- goto out_free;
- }
-
- flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
- err = devm_request_irq(dev, irq, sdhci_acpi_sd_cd, flags, "sd_cd", mmc);
- if (err)
- goto out_free;
-
- return 0;
-
-out_free:
- devm_gpiod_put(dev, desc);
-out:
- dev_warn(dev, "failed to setup card detect wake up\n");
- return err;
-}
-
-#else
-
-static int sdhci_acpi_add_own_cd(struct device *dev, struct mmc_host *mmc)
-{
- return 0;
-}
-
-#endif
-
static int sdhci_acpi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
- err = sdhci_add_host(host);
- if (err)
- goto err_free;
-
if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) {
- if (sdhci_acpi_add_own_cd(dev, host->mmc))
+ bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL);
+
+ if (mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0)) {
+ dev_warn(dev, "failed to setup card detect gpio\n");
c->use_runtime_pm = false;
+ }
}
+ err = sdhci_add_host(host);
+ if (err)
+ goto err_free;
+
if (c->use_runtime_pm) {
pm_runtime_set_active(dev);
pm_suspend_ignore_children(dev, 1);
struct sdhci_bcm_kona_dev {
struct mutex write_lock; /* protect back to back writes */
+ struct clk *external_clk;
};
goto err_pltfm_free;
}
+ /* Get and enable the external clock */
+ kona_dev->external_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(kona_dev->external_clk)) {
+ dev_err(dev, "Failed to get external clock\n");
+ ret = PTR_ERR(kona_dev->external_clk);
+ goto err_pltfm_free;
+ }
+
+ if (clk_set_rate(kona_dev->external_clk, host->mmc->f_max) != 0) {
+ dev_err(dev, "Failed to set rate external clock\n");
+ goto err_pltfm_free;
+ }
+
+ if (clk_prepare_enable(kona_dev->external_clk) != 0) {
+ dev_err(dev, "Failed to enable external clock\n");
+ goto err_pltfm_free;
+ }
+
dev_dbg(dev, "non-removable=%c\n",
(host->mmc->caps & MMC_CAP_NONREMOVABLE) ? 'Y' : 'N');
dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n",
ret = sdhci_bcm_kona_sd_reset(host);
if (ret)
- goto err_pltfm_free;
+ goto err_clk_disable;
sdhci_bcm_kona_sd_init(host);
err_reset:
sdhci_bcm_kona_sd_reset(host);
+err_clk_disable:
+ clk_disable_unprepare(kona_dev->external_clk);
+
err_pltfm_free:
sdhci_pltfm_free(pdev);
return ret;
}
-static int __exit sdhci_bcm_kona_remove(struct platform_device *pdev)
+static int sdhci_bcm_kona_remove(struct platform_device *pdev)
{
- return sdhci_pltfm_unregister(pdev);
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
+ struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv);
+ int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+ sdhci_remove_host(host, dead);
+
+ clk_disable_unprepare(kona_dev->external_clk);
+
+ sdhci_pltfm_free(pdev);
+
+ return 0;
}
static struct platform_driver sdhci_bcm_kona_driver = {
.name = "sdhci-dove",
.owner = THIS_MODULE,
.pm = SDHCI_PLTFM_PMOPS,
- .of_match_table = of_match_ptr(sdhci_dove_of_match_table),
+ .of_match_table = sdhci_dove_of_match_table,
},
.probe = sdhci_dove_probe,
.remove = sdhci_dove_remove,
--- /dev/null
+/*
+ * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver
+ *
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+#include <linux/mmc/mmc.h>
+#include <linux/slab.h>
+
+#include "sdhci-pltfm.h"
+
+#define CORE_HC_MODE 0x78
+#define HC_MODE_EN 0x1
+#define CORE_POWER 0x0
+#define CORE_SW_RST BIT(7)
+
+#define MAX_PHASES 16
+#define CORE_DLL_LOCK BIT(7)
+#define CORE_DLL_EN BIT(16)
+#define CORE_CDR_EN BIT(17)
+#define CORE_CK_OUT_EN BIT(18)
+#define CORE_CDR_EXT_EN BIT(19)
+#define CORE_DLL_PDN BIT(29)
+#define CORE_DLL_RST BIT(30)
+#define CORE_DLL_CONFIG 0x100
+#define CORE_DLL_STATUS 0x108
+
+#define CORE_VENDOR_SPEC 0x10c
+#define CORE_CLK_PWRSAVE BIT(1)
+
+#define CDR_SELEXT_SHIFT 20
+#define CDR_SELEXT_MASK (0xf << CDR_SELEXT_SHIFT)
+#define CMUX_SHIFT_PHASE_SHIFT 24
+#define CMUX_SHIFT_PHASE_MASK (7 << CMUX_SHIFT_PHASE_SHIFT)
+
+static const u32 tuning_block_64[] = {
+ 0x00ff0fff, 0xccc3ccff, 0xffcc3cc3, 0xeffefffe,
+ 0xddffdfff, 0xfbfffbff, 0xff7fffbf, 0xefbdf777,
+ 0xf0fff0ff, 0x3cccfc0f, 0xcfcc33cc, 0xeeffefff,
+ 0xfdfffdff, 0xffbfffdf, 0xfff7ffbb, 0xde7b7ff7
+};
+
+static const u32 tuning_block_128[] = {
+ 0xff00ffff, 0x0000ffff, 0xccccffff, 0xcccc33cc,
+ 0xcc3333cc, 0xffffcccc, 0xffffeeff, 0xffeeeeff,
+ 0xffddffff, 0xddddffff, 0xbbffffff, 0xbbffffff,
+ 0xffffffbb, 0xffffff77, 0x77ff7777, 0xffeeddbb,
+ 0x00ffffff, 0x00ffffff, 0xccffff00, 0xcc33cccc,
+ 0x3333cccc, 0xffcccccc, 0xffeeffff, 0xeeeeffff,
+ 0xddffffff, 0xddffffff, 0xffffffdd, 0xffffffbb,
+ 0xffffbbbb, 0xffff77ff, 0xff7777ff, 0xeeddbb77
+};
+
+struct sdhci_msm_host {
+ struct platform_device *pdev;
+ void __iomem *core_mem; /* MSM SDCC mapped address */
+ struct clk *clk; /* main SD/MMC bus clock */
+ struct clk *pclk; /* SDHC peripheral bus clock */
+ struct clk *bus_clk; /* SDHC bus voter clock */
+ struct mmc_host *mmc;
+ struct sdhci_pltfm_data sdhci_msm_pdata;
+};
+
+/* Platform specific tuning */
+static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll)
+{
+ u32 wait_cnt = 50;
+ u8 ck_out_en;
+ struct mmc_host *mmc = host->mmc;
+
+ /* Poll for CK_OUT_EN bit. max. poll time = 50us */
+ ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+ CORE_CK_OUT_EN);
+
+ while (ck_out_en != poll) {
+ if (--wait_cnt == 0) {
+ dev_err(mmc_dev(mmc), "%s: CK_OUT_EN bit is not %d\n",
+ mmc_hostname(mmc), poll);
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+
+ ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+ CORE_CK_OUT_EN);
+ }
+
+ return 0;
+}
+
+static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
+{
+ int rc;
+ static const u8 grey_coded_phase_table[] = {
+ 0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4,
+ 0xc, 0xd, 0xf, 0xe, 0xa, 0xb, 0x9, 0x8
+ };
+ unsigned long flags;
+ u32 config;
+ struct mmc_host *mmc = host->mmc;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN);
+ config |= (CORE_CDR_EXT_EN | CORE_DLL_EN);
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */
+ rc = msm_dll_poll_ck_out_en(host, 0);
+ if (rc)
+ goto err_out;
+
+ /*
+ * Write the selected DLL clock output phase (0 ... 15)
+ * to CDR_SELEXT bit field of DLL_CONFIG register.
+ */
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~CDR_SELEXT_MASK;
+ config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */
+ rc = msm_dll_poll_ck_out_en(host, 1);
+ if (rc)
+ goto err_out;
+
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config |= CORE_CDR_EN;
+ config &= ~CORE_CDR_EXT_EN;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+ goto out;
+
+err_out:
+ dev_err(mmc_dev(mmc), "%s: Failed to set DLL phase: %d\n",
+ mmc_hostname(mmc), phase);
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+ return rc;
+}
+
+/*
+ * Find out the greatest range of consecuitive selected
+ * DLL clock output phases that can be used as sampling
+ * setting for SD3.0 UHS-I card read operation (in SDR104
+ * timing mode) or for eMMC4.5 card read operation (in HS200
+ * timing mode).
+ * Select the 3/4 of the range and configure the DLL with the
+ * selected DLL clock output phase.
+ */
+
+static int msm_find_most_appropriate_phase(struct sdhci_host *host,
+ u8 *phase_table, u8 total_phases)
+{
+ int ret;
+ u8 ranges[MAX_PHASES][MAX_PHASES] = { {0}, {0} };
+ u8 phases_per_row[MAX_PHASES] = { 0 };
+ int row_index = 0, col_index = 0, selected_row_index = 0, curr_max = 0;
+ int i, cnt, phase_0_raw_index = 0, phase_15_raw_index = 0;
+ bool phase_0_found = false, phase_15_found = false;
+ struct mmc_host *mmc = host->mmc;
+
+ if (!total_phases || (total_phases > MAX_PHASES)) {
+ dev_err(mmc_dev(mmc), "%s: Invalid argument: total_phases=%d\n",
+ mmc_hostname(mmc), total_phases);
+ return -EINVAL;
+ }
+
+ for (cnt = 0; cnt < total_phases; cnt++) {
+ ranges[row_index][col_index] = phase_table[cnt];
+ phases_per_row[row_index] += 1;
+ col_index++;
+
+ if ((cnt + 1) == total_phases) {
+ continue;
+ /* check if next phase in phase_table is consecutive or not */
+ } else if ((phase_table[cnt] + 1) != phase_table[cnt + 1]) {
+ row_index++;
+ col_index = 0;
+ }
+ }
+
+ if (row_index >= MAX_PHASES)
+ return -EINVAL;
+
+ /* Check if phase-0 is present in first valid window? */
+ if (!ranges[0][0]) {
+ phase_0_found = true;
+ phase_0_raw_index = 0;
+ /* Check if cycle exist between 2 valid windows */
+ for (cnt = 1; cnt <= row_index; cnt++) {
+ if (phases_per_row[cnt]) {
+ for (i = 0; i < phases_per_row[cnt]; i++) {
+ if (ranges[cnt][i] == 15) {
+ phase_15_found = true;
+ phase_15_raw_index = cnt;
+ break;
+ }
+ }
+ }
+ }
+ }
+
+ /* If 2 valid windows form cycle then merge them as single window */
+ if (phase_0_found && phase_15_found) {
+ /* number of phases in raw where phase 0 is present */
+ u8 phases_0 = phases_per_row[phase_0_raw_index];
+ /* number of phases in raw where phase 15 is present */
+ u8 phases_15 = phases_per_row[phase_15_raw_index];
+
+ if (phases_0 + phases_15 >= MAX_PHASES)
+ /*
+ * If there are more than 1 phase windows then total
+ * number of phases in both the windows should not be
+ * more than or equal to MAX_PHASES.
+ */
+ return -EINVAL;
+
+ /* Merge 2 cyclic windows */
+ i = phases_15;
+ for (cnt = 0; cnt < phases_0; cnt++) {
+ ranges[phase_15_raw_index][i] =
+ ranges[phase_0_raw_index][cnt];
+ if (++i >= MAX_PHASES)
+ break;
+ }
+
+ phases_per_row[phase_0_raw_index] = 0;
+ phases_per_row[phase_15_raw_index] = phases_15 + phases_0;
+ }
+
+ for (cnt = 0; cnt <= row_index; cnt++) {
+ if (phases_per_row[cnt] > curr_max) {
+ curr_max = phases_per_row[cnt];
+ selected_row_index = cnt;
+ }
+ }
+
+ i = (curr_max * 3) / 4;
+ if (i)
+ i--;
+
+ ret = ranges[selected_row_index][i];
+
+ if (ret >= MAX_PHASES) {
+ ret = -EINVAL;
+ dev_err(mmc_dev(mmc), "%s: Invalid phase selected=%d\n",
+ mmc_hostname(mmc), ret);
+ }
+
+ return ret;
+}
+
+static inline void msm_cm_dll_set_freq(struct sdhci_host *host)
+{
+ u32 mclk_freq = 0, config;
+
+ /* Program the MCLK value to MCLK_FREQ bit field */
+ if (host->clock <= 112000000)
+ mclk_freq = 0;
+ else if (host->clock <= 125000000)
+ mclk_freq = 1;
+ else if (host->clock <= 137000000)
+ mclk_freq = 2;
+ else if (host->clock <= 150000000)
+ mclk_freq = 3;
+ else if (host->clock <= 162000000)
+ mclk_freq = 4;
+ else if (host->clock <= 175000000)
+ mclk_freq = 5;
+ else if (host->clock <= 187000000)
+ mclk_freq = 6;
+ else if (host->clock <= 200000000)
+ mclk_freq = 7;
+
+ config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+ config &= ~CMUX_SHIFT_PHASE_MASK;
+ config |= mclk_freq << CMUX_SHIFT_PHASE_SHIFT;
+ writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+}
+
+/* Initialize the DLL (Programmable Delay Line) */
+static int msm_init_cm_dll(struct sdhci_host *host)
+{
+ struct mmc_host *mmc = host->mmc;
+ int wait_cnt = 50;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ /*
+ * Make sure that clock is always enabled when DLL
+ * tuning is in progress. Keeping PWRSAVE ON may
+ * turn off the clock.
+ */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC)
+ & ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC);
+
+ /* Write 1 to DLL_RST bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Write 1 to DLL_PDN bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+ msm_cm_dll_set_freq(host);
+
+ /* Write 0 to DLL_RST bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ & ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Write 0 to DLL_PDN bit of DLL_CONFIG register */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ & ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set DLL_EN bit to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Set CK_OUT_EN bit to 1. */
+ writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+ | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+ /* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */
+ while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) &
+ CORE_DLL_LOCK)) {
+ /* max. wait for 50us sec for LOCK bit to be set */
+ if (--wait_cnt == 0) {
+ dev_err(mmc_dev(mmc), "%s: DLL failed to LOCK\n",
+ mmc_hostname(mmc));
+ spin_unlock_irqrestore(&host->lock, flags);
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ return 0;
+}
+
+static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+ int tuning_seq_cnt = 3;
+ u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
+ const u32 *tuning_block_pattern = tuning_block_64;
+ int size = sizeof(tuning_block_64); /* Pattern size in bytes */
+ int rc;
+ struct mmc_host *mmc = host->mmc;
+ struct mmc_ios ios = host->mmc->ios;
+
+ /*
+ * Tuning is required for SDR104, HS200 and HS400 cards and
+ * if clock frequency is greater than 100MHz in these modes.
+ */
+ if (host->clock <= 100 * 1000 * 1000 ||
+ !((ios.timing == MMC_TIMING_MMC_HS200) ||
+ (ios.timing == MMC_TIMING_UHS_SDR104)))
+ return 0;
+
+ if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
+ (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
+ tuning_block_pattern = tuning_block_128;
+ size = sizeof(tuning_block_128);
+ }
+
+ data_buf = kmalloc(size, GFP_KERNEL);
+ if (!data_buf)
+ return -ENOMEM;
+
+retry:
+ /* First of all reset the tuning block */
+ rc = msm_init_cm_dll(host);
+ if (rc)
+ goto out;
+
+ phase = 0;
+ do {
+ struct mmc_command cmd = { 0 };
+ struct mmc_data data = { 0 };
+ struct mmc_request mrq = {
+ .cmd = &cmd,
+ .data = &data
+ };
+ struct scatterlist sg;
+
+ /* Set the phase in delay line hw block */
+ rc = msm_config_cm_dll_phase(host, phase);
+ if (rc)
+ goto out;
+
+ cmd.opcode = opcode;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = size;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.timeout_ns = NSEC_PER_SEC; /* 1 second */
+
+ data.sg = &sg;
+ data.sg_len = 1;
+ sg_init_one(&sg, data_buf, size);
+ memset(data_buf, 0, size);
+ mmc_wait_for_req(mmc, &mrq);
+
+ if (!cmd.error && !data.error &&
+ !memcmp(data_buf, tuning_block_pattern, size)) {
+ /* Tuning is successful at this tuning point */
+ tuned_phases[tuned_phase_cnt++] = phase;
+ dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
+ mmc_hostname(mmc), phase);
+ }
+ } while (++phase < ARRAY_SIZE(tuned_phases));
+
+ if (tuned_phase_cnt) {
+ rc = msm_find_most_appropriate_phase(host, tuned_phases,
+ tuned_phase_cnt);
+ if (rc < 0)
+ goto out;
+ else
+ phase = rc;
+
+ /*
+ * Finally set the selected phase in delay
+ * line hw block.
+ */
+ rc = msm_config_cm_dll_phase(host, phase);
+ if (rc)
+ goto out;
+ dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
+ mmc_hostname(mmc), phase);
+ } else {
+ if (--tuning_seq_cnt)
+ goto retry;
+ /* Tuning failed */
+ dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n",
+ mmc_hostname(mmc));
+ rc = -EIO;
+ }
+
+out:
+ kfree(data_buf);
+ return rc;
+}
+
+static const struct of_device_id sdhci_msm_dt_match[] = {
+ { .compatible = "qcom,sdhci-msm-v4" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
+
+static struct sdhci_ops sdhci_msm_ops = {
+ .platform_execute_tuning = sdhci_msm_execute_tuning,
+};
+
+static int sdhci_msm_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_msm_host *msm_host;
+ struct resource *core_memres;
+ int ret;
+ u16 host_version;
+
+ msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
+ if (!msm_host)
+ return -ENOMEM;
+
+ msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops;
+ host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0);
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+ pltfm_host->priv = msm_host;
+ msm_host->mmc = host->mmc;
+ msm_host->pdev = pdev;
+
+ ret = mmc_of_parse(host->mmc);
+ if (ret)
+ goto pltfm_free;
+
+ sdhci_get_of_property(pdev);
+
+ /* Setup SDCC bus voter clock. */
+ msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (!IS_ERR(msm_host->bus_clk)) {
+ /* Vote for max. clk rate for max. performance */
+ ret = clk_set_rate(msm_host->bus_clk, INT_MAX);
+ if (ret)
+ goto pltfm_free;
+ ret = clk_prepare_enable(msm_host->bus_clk);
+ if (ret)
+ goto pltfm_free;
+ }
+
+ /* Setup main peripheral bus clock */
+ msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(msm_host->pclk)) {
+ ret = PTR_ERR(msm_host->pclk);
+ dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret);
+ goto bus_clk_disable;
+ }
+
+ ret = clk_prepare_enable(msm_host->pclk);
+ if (ret)
+ goto bus_clk_disable;
+
+ /* Setup SDC MMC clock */
+ msm_host->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(msm_host->clk)) {
+ ret = PTR_ERR(msm_host->clk);
+ dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret);
+ goto pclk_disable;
+ }
+
+ ret = clk_prepare_enable(msm_host->clk);
+ if (ret)
+ goto pclk_disable;
+
+ core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres);
+
+ if (IS_ERR(msm_host->core_mem)) {
+ dev_err(&pdev->dev, "Failed to remap registers\n");
+ ret = PTR_ERR(msm_host->core_mem);
+ goto clk_disable;
+ }
+
+ /* Reset the core and Enable SDHC mode */
+ writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
+ CORE_SW_RST, msm_host->core_mem + CORE_POWER);
+
+ /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
+ usleep_range(1000, 5000);
+ if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) {
+ dev_err(&pdev->dev, "Stuck in reset\n");
+ ret = -ETIMEDOUT;
+ goto clk_disable;
+ }
+
+ /* Set HC_MODE_EN bit in HC_MODE register */
+ writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
+
+ host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+ host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE;
+
+ host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
+ dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n",
+ host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>
+ SDHCI_VENDOR_VER_SHIFT));
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto clk_disable;
+
+ return 0;
+
+clk_disable:
+ clk_disable_unprepare(msm_host->clk);
+pclk_disable:
+ clk_disable_unprepare(msm_host->pclk);
+bus_clk_disable:
+ if (!IS_ERR(msm_host->bus_clk))
+ clk_disable_unprepare(msm_host->bus_clk);
+pltfm_free:
+ sdhci_pltfm_free(pdev);
+ return ret;
+}
+
+static int sdhci_msm_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = pltfm_host->priv;
+ int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) ==
+ 0xffffffff);
+
+ sdhci_remove_host(host, dead);
+ sdhci_pltfm_free(pdev);
+ clk_disable_unprepare(msm_host->clk);
+ clk_disable_unprepare(msm_host->pclk);
+ if (!IS_ERR(msm_host->bus_clk))
+ clk_disable_unprepare(msm_host->bus_clk);
+ return 0;
+}
+
+static struct platform_driver sdhci_msm_driver = {
+ .probe = sdhci_msm_probe,
+ .remove = sdhci_msm_remove,
+ .driver = {
+ .name = "sdhci_msm",
+ .owner = THIS_MODULE,
+ .of_match_table = sdhci_msm_dt_match,
+ },
+};
+
+module_platform_driver(sdhci_msm_driver);
+
+MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL v2");
.probe = via_probe,
};
+static int rtsx_probe_slot(struct sdhci_pci_slot *slot)
+{
+ slot->host->mmc->caps2 |= MMC_CAP2_HS200;
+ return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_rtsx = {
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_BROKEN_DDR50,
+ .probe_slot = rtsx_probe_slot,
+};
+
static const struct pci_device_id pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_RICOH,
.driver_data = (kernel_ulong_t)&sdhci_via,
},
+ {
+ .vendor = PCI_VENDOR_ID_REALTEK,
+ .device = 0x5250,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_rtsx,
+ },
+
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_MRST_SD0,
#include <linux/of_gpio.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/mbus.h>
#include "sdhci.h"
#include "sdhci-pltfm.h"
#define SDCE_MISC_INT (1<<2)
#define SDCE_MISC_INT_EN (1<<1)
+/*
+ * These registers are relative to the second register region, for the
+ * MBus bridge.
+ */
+#define SDHCI_WINDOW_CTRL(i) (0x80 + ((i) << 3))
+#define SDHCI_WINDOW_BASE(i) (0x84 + ((i) << 3))
+#define SDHCI_MAX_WIN_NUM 8
+
+static int mv_conf_mbus_windows(struct platform_device *pdev,
+ const struct mbus_dram_target_info *dram)
+{
+ int i;
+ void __iomem *regs;
+ struct resource *res;
+
+ if (!dram) {
+ dev_err(&pdev->dev, "no mbus dram info\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot get mbus registers\n");
+ return -EINVAL;
+ }
+
+ regs = ioremap(res->start, resource_size(res));
+ if (!regs) {
+ dev_err(&pdev->dev, "cannot map mbus registers\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
+ writel(0, regs + SDHCI_WINDOW_CTRL(i));
+ writel(0, regs + SDHCI_WINDOW_BASE(i));
+ }
+
+ for (i = 0; i < dram->num_cs; i++) {
+ const struct mbus_dram_window *cs = dram->cs + i;
+
+ /* Write size, attributes and target id to control register */
+ writel(((cs->size - 1) & 0xffff0000) |
+ (cs->mbus_attr << 8) |
+ (dram->mbus_dram_target_id << 4) | 1,
+ regs + SDHCI_WINDOW_CTRL(i));
+ /* Write base address to base register */
+ writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
+ }
+
+ iounmap(regs);
+
+ return 0;
+}
+
static void pxav3_set_private_registers(struct sdhci_host *host, u8 mask)
{
struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
{
.compatible = "mrvl,pxav3-mmc",
},
+ {
+ .compatible = "marvell,armada-380-sdhci",
+ },
{},
};
MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
kfree(pxa);
return PTR_ERR(host);
}
+
+ if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
+ ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
+ if (ret < 0)
+ goto err_mbus_win;
+ }
+
+
pltfm_host = sdhci_priv(host);
pltfm_host->priv = pxa;
clk_disable_unprepare(clk);
clk_put(clk);
err_clk_get:
+err_mbus_win:
sdhci_pltfm_free(pdev);
kfree(pxa);
return ret;
struct platform_device *pdev;
struct resource *ioarea;
struct s3c_sdhci_platdata *pdata;
- unsigned int cur_clk;
+ int cur_clk;
int ext_cd_irq;
int ext_cd_gpio;
struct clk *clk_io;
struct clk *clk_bus[MAX_BUS_CLK];
+ unsigned long clk_rates[MAX_BUS_CLK];
};
/**
return sdhci_priv(host);
}
-/**
- * get_curclk - convert ctrl2 register to clock source number
- * @ctrl2: Control2 register value.
- */
-static u32 get_curclk(u32 ctrl2)
-{
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
-
- return ctrl2;
-}
-
-static void sdhci_s3c_check_sclk(struct sdhci_host *host)
-{
- struct sdhci_s3c *ourhost = to_s3c(host);
- u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
-
- if (get_curclk(tmp) != ourhost->cur_clk) {
- dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
-
- tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
- writel(tmp, host->ioaddr + S3C_SDHCI_CONTROL2);
- }
-}
-
/**
* sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
* @host: The SDHCI host instance.
static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
{
struct sdhci_s3c *ourhost = to_s3c(host);
- struct clk *busclk;
- unsigned int rate, max;
- int clk;
-
- /* note, a reset will reset the clock source */
-
- sdhci_s3c_check_sclk(host);
-
- for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
- busclk = ourhost->clk_bus[clk];
- if (!busclk)
- continue;
+ unsigned long rate, max = 0;
+ int src;
- rate = clk_get_rate(busclk);
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ rate = ourhost->clk_rates[src];
if (rate > max)
max = rate;
}
{
unsigned long rate;
struct clk *clksrc = ourhost->clk_bus[src];
- int div;
+ int shift;
- if (!clksrc)
+ if (IS_ERR(clksrc))
return UINT_MAX;
/*
return wanted - rate;
}
- rate = clk_get_rate(clksrc);
+ rate = ourhost->clk_rates[src];
- for (div = 1; div < 256; div *= 2) {
- if ((rate / div) <= wanted)
+ for (shift = 0; shift <= 8; ++shift) {
+ if ((rate >> shift) <= wanted)
break;
}
+ if (shift > 8) {
+ dev_dbg(&ourhost->pdev->dev,
+ "clk %d: rate %ld, min rate %lu > wanted %u\n",
+ src, rate, rate / 256, wanted);
+ return UINT_MAX;
+ }
+
dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
- src, rate, wanted, rate / div);
+ src, rate, wanted, rate >> shift);
- return wanted - (rate / div);
+ return wanted - (rate >> shift);
}
/**
struct clk *clk = ourhost->clk_bus[best_src];
clk_prepare_enable(clk);
- clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
-
- /* turn clock off to card before changing clock source */
- writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+ if (ourhost->cur_clk >= 0)
+ clk_disable_unprepare(
+ ourhost->clk_bus[ourhost->cur_clk]);
ourhost->cur_clk = best_src;
- host->max_clk = clk_get_rate(clk);
-
- ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
- ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
- writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+ host->max_clk = ourhost->clk_rates[best_src];
}
+ /* turn clock off to card before changing clock source */
+ writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+ ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+ ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+ writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
/* reprogram default hardware configuration */
writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
host->ioaddr + S3C64XX_SDHCI_CONTROL4);
static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
{
struct sdhci_s3c *ourhost = to_s3c(host);
- unsigned int delta, min = UINT_MAX;
+ unsigned long rate, min = ULONG_MAX;
int src;
for (src = 0; src < MAX_BUS_CLK; src++) {
- delta = sdhci_s3c_consider_clock(ourhost, src, 0);
- if (delta == UINT_MAX)
+ rate = ourhost->clk_rates[src] / 256;
+ if (!rate)
continue;
- /* delta is a negative value in this case */
- if (-delta < min)
- min = -delta;
+ if (rate < min)
+ min = rate;
}
+
return min;
}
static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
{
struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned long rate, max = 0;
+ int src;
- return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], UINT_MAX);
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ struct clk *clk;
+
+ clk = ourhost->clk_bus[src];
+ if (IS_ERR(clk))
+ continue;
+
+ rate = clk_round_rate(clk, ULONG_MAX);
+ if (rate > max)
+ max = rate;
+ }
+
+ return max;
}
/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
{
struct sdhci_s3c *ourhost = to_s3c(host);
+ unsigned long rate, min = ULONG_MAX;
+ int src;
- /*
- * initial clock can be in the frequency range of
- * 100KHz-400KHz, so we set it as max value.
- */
- return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], 400000);
+ for (src = 0; src < MAX_BUS_CLK; src++) {
+ struct clk *clk;
+
+ clk = ourhost->clk_bus[src];
+ if (IS_ERR(clk))
+ continue;
+
+ rate = clk_round_rate(clk, 0);
+ if (rate < min)
+ min = rate;
+ }
+
+ return min;
}
/* sdhci_cmu_set_clock - callback on clock change.*/
sc->host = host;
sc->pdev = pdev;
sc->pdata = pdata;
+ sc->cur_clk = -1;
platform_set_drvdata(pdev, host);
clk_prepare_enable(sc->clk_io);
for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
- struct clk *clk;
char name[14];
snprintf(name, 14, "mmc_busclk.%d", ptr);
- clk = devm_clk_get(dev, name);
- if (IS_ERR(clk))
+ sc->clk_bus[ptr] = devm_clk_get(dev, name);
+ if (IS_ERR(sc->clk_bus[ptr]))
continue;
clks++;
- sc->clk_bus[ptr] = clk;
-
- /*
- * save current clock index to know which clock bus
- * is used later in overriding functions.
- */
- sc->cur_clk = ptr;
+ sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
dev_info(dev, "clock source %d: %s (%ld Hz)\n",
- ptr, name, clk_get_rate(clk));
+ ptr, name, sc->clk_rates[ptr]);
}
if (clks == 0) {
goto err_no_busclks;
}
-#ifndef CONFIG_PM_RUNTIME
- clk_prepare_enable(sc->clk_bus[sc->cur_clk]);
-#endif
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->ioaddr)) {
return 0;
err_req_regs:
-#ifndef CONFIG_PM_RUNTIME
- clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
-#endif
-
err_no_busclks:
clk_disable_unprepare(sc->clk_io);
pm_runtime_dont_use_autosuspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
-#ifndef CONFIG_PM_RUNTIME
- clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
-#endif
clk_disable_unprepare(sc->clk_io);
sdhci_free_host(host);
ret = sdhci_runtime_suspend_host(host);
- clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
+ if (ourhost->cur_clk >= 0)
+ clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
clk_disable_unprepare(busclk);
return ret;
}
int ret;
clk_prepare_enable(busclk);
- clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
+ if (ourhost->cur_clk >= 0)
+ clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
ret = sdhci_runtime_resume_host(host);
return ret;
}
#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdhci-spear.h>
+#include <linux/mmc/slot-gpio.h>
#include <linux/io.h>
#include "sdhci.h"
/* Nothing to do for now. */
};
-/* gpio card detection interrupt handler */
-static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
-{
- struct platform_device *pdev = dev_id;
- struct sdhci_host *host = platform_get_drvdata(pdev);
- struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
- unsigned long gpio_irq_type;
- int val;
-
- val = gpio_get_value(sdhci->data->card_int_gpio);
-
- /* val == 1 -> card removed, val == 0 -> card inserted */
- /* if card removed - set irq for low level, else vice versa */
- gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
- irq_set_irq_type(irq, gpio_irq_type);
-
- if (sdhci->data->card_power_gpio >= 0) {
- if (!sdhci->data->power_always_enb) {
- /* if card inserted, give power, otherwise remove it */
- val = sdhci->data->power_active_high ? !val : val ;
- gpio_set_value(sdhci->data->card_power_gpio, val);
- }
- }
-
- /* inform sdhci driver about card insertion/removal */
- tasklet_schedule(&host->card_tasklet);
-
- return IRQ_HANDLED;
-}
-
#ifdef CONFIG_OF
static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
{
/* If pdata is required */
if (cd_gpio != -1) {
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata) {
+ if (!pdata)
dev_err(&pdev->dev, "DT: kzalloc failed\n");
- return ERR_PTR(-ENOMEM);
- }
+ else
+ pdata->card_int_gpio = cd_gpio;
}
- pdata->card_int_gpio = cd_gpio;
-
return pdata;
}
#else
struct sdhci_host *host;
struct resource *iomem;
struct spear_sdhci *sdhci;
+ struct device *dev;
int ret;
- iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iomem) {
- ret = -ENOMEM;
- dev_dbg(&pdev->dev, "memory resource not defined\n");
+ dev = pdev->dev.parent ? pdev->dev.parent : &pdev->dev;
+ host = sdhci_alloc_host(dev, sizeof(*sdhci));
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
goto err;
}
- if (!devm_request_mem_region(&pdev->dev, iomem->start,
- resource_size(iomem), "spear-sdhci")) {
- ret = -EBUSY;
- dev_dbg(&pdev->dev, "cannot request region\n");
- goto err;
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
+ if (IS_ERR(host->ioaddr)) {
+ ret = PTR_ERR(host->ioaddr);
+ dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret);
+ goto err_host;
}
- sdhci = devm_kzalloc(&pdev->dev, sizeof(*sdhci), GFP_KERNEL);
- if (!sdhci) {
- ret = -ENOMEM;
- dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
- goto err;
- }
+ host->hw_name = "sdhci";
+ host->ops = &sdhci_pltfm_ops;
+ host->irq = platform_get_irq(pdev, 0);
+ host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
+
+ sdhci = sdhci_priv(host);
/* clk enable */
- sdhci->clk = clk_get(&pdev->dev, NULL);
+ sdhci->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(sdhci->clk)) {
ret = PTR_ERR(sdhci->clk);
dev_dbg(&pdev->dev, "Error getting clock\n");
- goto err;
+ goto err_host;
}
ret = clk_prepare_enable(sdhci->clk);
if (ret) {
dev_dbg(&pdev->dev, "Error enabling clock\n");
- goto put_clk;
+ goto err_host;
}
ret = clk_set_rate(sdhci->clk, 50000000);
sdhci->data = sdhci_probe_config_dt(pdev);
if (IS_ERR(sdhci->data)) {
dev_err(&pdev->dev, "DT: Failed to get pdata\n");
- return -ENODEV;
+ goto disable_clk;
}
} else {
sdhci->data = dev_get_platdata(&pdev->dev);
}
- pdev->dev.platform_data = sdhci;
-
- if (pdev->dev.parent)
- host = sdhci_alloc_host(pdev->dev.parent, 0);
- else
- host = sdhci_alloc_host(&pdev->dev, 0);
-
- if (IS_ERR(host)) {
- ret = PTR_ERR(host);
- dev_dbg(&pdev->dev, "error allocating host\n");
- goto disable_clk;
- }
-
- host->hw_name = "sdhci";
- host->ops = &sdhci_pltfm_ops;
- host->irq = platform_get_irq(pdev, 0);
- host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
-
- host->ioaddr = devm_ioremap(&pdev->dev, iomem->start,
- resource_size(iomem));
- if (!host->ioaddr) {
- ret = -ENOMEM;
- dev_dbg(&pdev->dev, "failed to remap registers\n");
- goto free_host;
+ /*
+ * It is optional to use GPIOs for sdhci card detection. If
+ * sdhci->data is NULL, then use original sdhci lines otherwise
+ * GPIO lines. We use the built-in GPIO support for this.
+ */
+ if (sdhci->data && sdhci->data->card_int_gpio >= 0) {
+ ret = mmc_gpio_request_cd(host->mmc,
+ sdhci->data->card_int_gpio, 0);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev,
+ "failed to request card-detect gpio%d\n",
+ sdhci->data->card_int_gpio);
+ goto disable_clk;
+ }
}
ret = sdhci_add_host(host);
if (ret) {
dev_dbg(&pdev->dev, "error adding host\n");
- goto free_host;
+ goto disable_clk;
}
platform_set_drvdata(pdev, host);
- /*
- * It is optional to use GPIOs for sdhci Power control & sdhci card
- * interrupt detection. If sdhci->data is NULL, then use original sdhci
- * lines otherwise GPIO lines.
- * If GPIO is selected for power control, then power should be disabled
- * after card removal and should be enabled when card insertion
- * interrupt occurs
- */
- if (!sdhci->data)
- return 0;
-
- if (sdhci->data->card_power_gpio >= 0) {
- int val = 0;
-
- ret = devm_gpio_request(&pdev->dev,
- sdhci->data->card_power_gpio, "sdhci");
- if (ret < 0) {
- dev_dbg(&pdev->dev, "gpio request fail: %d\n",
- sdhci->data->card_power_gpio);
- goto set_drvdata;
- }
-
- if (sdhci->data->power_always_enb)
- val = sdhci->data->power_active_high;
- else
- val = !sdhci->data->power_active_high;
-
- ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
- if (ret) {
- dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
- sdhci->data->card_power_gpio);
- goto set_drvdata;
- }
- }
-
- if (sdhci->data->card_int_gpio >= 0) {
- ret = devm_gpio_request(&pdev->dev, sdhci->data->card_int_gpio,
- "sdhci");
- if (ret < 0) {
- dev_dbg(&pdev->dev, "gpio request fail: %d\n",
- sdhci->data->card_int_gpio);
- goto set_drvdata;
- }
-
- ret = gpio_direction_input(sdhci->data->card_int_gpio);
- if (ret) {
- dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
- sdhci->data->card_int_gpio);
- goto set_drvdata;
- }
- ret = devm_request_irq(&pdev->dev,
- gpio_to_irq(sdhci->data->card_int_gpio),
- sdhci_gpio_irq, IRQF_TRIGGER_LOW,
- mmc_hostname(host->mmc), pdev);
- if (ret) {
- dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
- sdhci->data->card_int_gpio);
- goto set_drvdata;
- }
-
- }
-
return 0;
-set_drvdata:
- sdhci_remove_host(host, 1);
-free_host:
- sdhci_free_host(host);
disable_clk:
clk_disable_unprepare(sdhci->clk);
-put_clk:
- clk_put(sdhci->clk);
+err_host:
+ sdhci_free_host(host);
err:
dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
return ret;
static int sdhci_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
- struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
+ struct spear_sdhci *sdhci = sdhci_priv(host);
int dead = 0;
u32 scratch;
dead = 1;
sdhci_remove_host(host, dead);
- sdhci_free_host(host);
clk_disable_unprepare(sdhci->clk);
- clk_put(sdhci->clk);
+ sdhci_free_host(host);
return 0;
}
static int sdhci_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
- struct spear_sdhci *sdhci = dev_get_platdata(dev);
+ struct spear_sdhci *sdhci = sdhci_priv(host);
int ret;
ret = sdhci_suspend_host(host);
static int sdhci_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
- struct spear_sdhci *sdhci = dev_get_platdata(dev);
+ struct spear_sdhci *sdhci = sdhci_priv(host);
int ret;
ret = clk_enable(sdhci->clk);
return 0xE;
/* Unspecified timeout, assume max */
- if (!data && !cmd->cmd_timeout_ms)
+ if (!data && !cmd->busy_timeout)
return 0xE;
/* timeout in us */
if (!data)
- target_timeout = cmd->cmd_timeout_ms * 1000;
+ target_timeout = cmd->busy_timeout * 1000;
else {
target_timeout = data->timeout_ns / 1000;
if (host->clock)
}
timeout = jiffies;
- if (!cmd->data && cmd->cmd_timeout_ms > 9000)
- timeout += DIV_ROUND_UP(cmd->cmd_timeout_ms, 1000) * HZ + HZ;
+ if (!cmd->data && cmd->busy_timeout > 9000)
+ timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
else
timeout += 10 * HZ;
mod_timer(&host->timer, timeout);
host->tuning_count * HZ);
/* Tuning mode 1 limits the maximum data length to 4MB */
mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size;
- } else {
+ } else if (host->flags & SDHCI_USING_RETUNING_TIMER) {
host->flags &= ~SDHCI_NEEDS_RETUNING;
/* Reload the new initial value for timer */
- if (host->tuning_mode == SDHCI_TUNING_MODE_1)
- mod_timer(&host->tuning_timer, jiffies +
- host->tuning_count * HZ);
+ mod_timer(&host->tuning_timer, jiffies +
+ host->tuning_count * HZ);
}
/*
if (host->runtime_suspended) {
spin_unlock(&host->lock);
- pr_warning("%s: got irq while runtime suspended\n",
- mmc_hostname(host->mmc));
- return IRQ_HANDLED;
+ return IRQ_NONE;
}
intmask = sdhci_readl(host, SDHCI_INT_STATUS);
if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
host->timeout_clk = mmc->f_max / 1000;
- mmc->max_discard_to = (1 << 27) / host->timeout_clk;
+ mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
} else if (caps[1] & SDHCI_SUPPORT_SDR50)
mmc->caps |= MMC_CAP_UHS_SDR50;
- if (caps[1] & SDHCI_SUPPORT_DDR50)
+ if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
+ !(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
mmc->caps |= MMC_CAP_UHS_DDR50;
/* Does the host need tuning for SDR50? */
struct sh_mobile_sdhi_of_data {
unsigned long tmio_flags;
+ unsigned long capabilities;
+ unsigned long capabilities2;
};
static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = {
},
};
+static const struct sh_mobile_sdhi_of_data of_rcar_gen1_compatible = {
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+ .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+};
+
+static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+ .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+ .capabilities2 = MMC_CAP2_NO_MULTI_READ,
+};
+
+static const struct of_device_id sh_mobile_sdhi_of_match[] = {
+ { .compatible = "renesas,sdhi-shmobile" },
+ { .compatible = "renesas,sdhi-sh7372" },
+ { .compatible = "renesas,sdhi-sh73a0", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-r8a73a4", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-r8a7740", .data = &sh_mobile_sdhi_of_cfg[0], },
+ { .compatible = "renesas,sdhi-r8a7778", .data = &of_rcar_gen1_compatible, },
+ { .compatible = "renesas,sdhi-r8a7779", .data = &of_rcar_gen1_compatible, },
+ { .compatible = "renesas,sdhi-r8a7790", .data = &of_rcar_gen2_compatible, },
+ { .compatible = "renesas,sdhi-r8a7791", .data = &of_rcar_gen2_compatible, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
+
struct sh_mobile_sdhi {
struct clk *clk;
struct tmio_mmc_data mmc_data;
.cd_wakeup = sh_mobile_sdhi_cd_wakeup,
};
-static const struct of_device_id sh_mobile_sdhi_of_match[] = {
- { .compatible = "renesas,sdhi-shmobile" },
- { .compatible = "renesas,sdhi-sh7372" },
- { .compatible = "renesas,sdhi-sh73a0", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,sdhi-r8a73a4", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,sdhi-r8a7740", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,sdhi-r8a7778", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,sdhi-r8a7779", .data = &sh_mobile_sdhi_of_cfg[0], },
- { .compatible = "renesas,sdhi-r8a7790", .data = &sh_mobile_sdhi_of_cfg[0], },
- {},
-};
-MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
-
static int sh_mobile_sdhi_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
if (of_id && of_id->data) {
const struct sh_mobile_sdhi_of_data *of_data = of_id->data;
mmc_data->flags |= of_data->tmio_flags;
+ mmc_data->capabilities |= of_data->capabilities;
+ mmc_data->capabilities2 |= of_data->capabilities2;
}
/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
}
static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
- .suspend = tmio_mmc_host_suspend,
- .resume = tmio_mmc_host_resume,
- .runtime_suspend = tmio_mmc_host_runtime_suspend,
- .runtime_resume = tmio_mmc_host_runtime_resume,
+ SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_host_suspend, tmio_mmc_host_resume)
+ SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
+ tmio_mmc_host_runtime_resume,
+ NULL)
};
static struct platform_driver sh_mobile_sdhi_driver = {
#include "tmio_mmc.h"
-#ifdef CONFIG_PM
-static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int tmio_mmc_suspend(struct device *dev)
{
- const struct mfd_cell *cell = mfd_get_cell(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
int ret;
- ret = tmio_mmc_host_suspend(&dev->dev);
+ ret = tmio_mmc_host_suspend(dev);
/* Tell MFD core it can disable us now.*/
if (!ret && cell->disable)
- cell->disable(dev);
+ cell->disable(pdev);
return ret;
}
-static int tmio_mmc_resume(struct platform_device *dev)
+static int tmio_mmc_resume(struct device *dev)
{
- const struct mfd_cell *cell = mfd_get_cell(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
int ret = 0;
/* Tell the MFD core we are ready to be enabled */
if (cell->resume)
- ret = cell->resume(dev);
+ ret = cell->resume(pdev);
if (!ret)
- ret = tmio_mmc_host_resume(&dev->dev);
+ ret = tmio_mmc_host_resume(dev);
return ret;
}
-#else
-#define tmio_mmc_suspend NULL
-#define tmio_mmc_resume NULL
#endif
static int tmio_mmc_probe(struct platform_device *pdev)
/* ------------------- device registration ----------------------- */
+static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_suspend, tmio_mmc_resume)
+};
+
static struct platform_driver tmio_mmc_driver = {
.driver = {
.name = "tmio-mmc",
.owner = THIS_MODULE,
+ .pm = &tmio_mmc_dev_pm_ops,
},
.probe = tmio_mmc_probe,
.remove = tmio_mmc_remove,
- .suspend = tmio_mmc_suspend,
- .resume = tmio_mmc_resume,
};
module_platform_driver(tmio_mmc_driver);
}
#endif
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
int tmio_mmc_host_suspend(struct device *dev);
int tmio_mmc_host_resume(struct device *dev);
-#else
-#define tmio_mmc_host_suspend NULL
-#define tmio_mmc_host_resume NULL
#endif
+#ifdef CONFIG_PM_RUNTIME
int tmio_mmc_host_runtime_suspend(struct device *dev);
int tmio_mmc_host_runtime_resume(struct device *dev);
+#endif
static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
{
}
EXPORT_SYMBOL(tmio_mmc_host_remove);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
int tmio_mmc_host_suspend(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
return 0;
}
EXPORT_SYMBOL(tmio_mmc_host_resume);
+#endif
-#endif /* CONFIG_PM */
-
+#ifdef CONFIG_PM_RUNTIME
int tmio_mmc_host_runtime_suspend(struct device *dev)
{
return 0;
return 0;
}
EXPORT_SYMBOL(tmio_mmc_host_runtime_resume);
+#endif
MODULE_LICENSE("GPL v2");
ret = -ENOMEM;
goto err;
}
- ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
+ ushc->csw = kzalloc(sizeof(struct ushc_csw), GFP_KERNEL);
if (ushc->csw == NULL) {
ret = -ENOMEM;
goto err;
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_id =
of_match_device(wmt_mci_dt_ids, &pdev->dev);
- const struct wmt_mci_caps *wmt_caps = of_id->data;
+ const struct wmt_mci_caps *wmt_caps;
int ret;
int regular_irq, dma_irq;
return -EFAULT;
}
+ wmt_caps = of_id->data;
+
if (!np) {
dev_err(&pdev->dev, "Missing SDMMC description in devicetree\n");
return -EFAULT;
netdev_dbg(ndev, "Event %x, Link %x\n", status,
ntb_transport_link_query(dev->qp));
- /* Currently, only link status event is supported */
- if (status)
- netif_carrier_on(ndev);
- else
+ switch (status) {
+ case NTB_LINK_DOWN:
netif_carrier_off(ndev);
+ break;
+ case NTB_LINK_UP:
+ if (!ntb_transport_link_query(dev->qp))
+ return;
+
+ netif_carrier_on(ndev);
+ break;
+ default:
+ netdev_warn(ndev, "Unsupported event type %d\n", status);
+ }
}
static void ntb_netdev_rx_handler(struct ntb_transport_qp *qp, void *qp_data,
rc = ntb_transport_rx_enqueue(dev->qp, skb, skb->data,
ndev->mtu + ETH_HLEN);
- if (rc == -EINVAL)
+ if (rc == -EINVAL) {
+ dev_kfree_skb(skb);
goto err;
+ }
}
netif_carrier_off(ndev);
{
struct net_device *ndev;
struct ntb_netdev *dev;
+ bool found = false;
list_for_each_entry(dev, &dev_list, list) {
- if (dev->pdev == pdev)
+ if (dev->pdev == pdev) {
+ found = true;
break;
+ }
}
- if (dev == NULL)
+ if (!found)
return;
list_del(&dev->list);
/* Translate memory window 0,1 to BAR 2,4 */
#define MW_TO_BAR(mw) (mw * NTB_MAX_NUM_MW + 2)
-static DEFINE_PCI_DEVICE_TABLE(ntb_pci_tbl) = {
+static const struct pci_device_id ntb_pci_tbl[] = {
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_BWD)},
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_JSF)},
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_SNB)},
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
int ntb_register_event_callback(struct ntb_device *ndev,
- void (*func)(void *handle, enum ntb_hw_event event))
+ void (*func)(void *handle,
+ enum ntb_hw_event event))
{
if (ndev->event_cb)
return -EINVAL;
SNB_PBAR4LMT_OFFSET);
/* HW errata on the Limit registers. They can only be
* written when the base register is 4GB aligned and
- * < 32bit. This should already be the case based on the
- * driver defaults, but write the Limit registers first
- * just in case.
+ * < 32bit. This should already be the case based on
+ * the driver defaults, but write the Limit registers
+ * first just in case.
*/
} else {
ndev->limits.max_mw = SNB_MAX_MW;
writeq(0, ndev->reg_base + SNB_PBAR4LMT_OFFSET);
/* HW errata on the Limit registers. They can only be
* written when the base register is 4GB aligned and
- * < 32bit. This should already be the case based on the
- * driver defaults, but write the Limit registers first
- * just in case.
+ * < 32bit. This should already be the case based on
+ * the driver defaults, but write the Limit registers
+ * first just in case.
*/
}
/* B2B_XLAT_OFFSET is a 64bit register, but can
* only take 32bit writes
*/
- writel(SNB_MBAR01_DSD_ADDR & 0xffffffff,
+ writel(SNB_MBAR01_USD_ADDR & 0xffffffff,
ndev->reg_base + SNB_B2B_XLAT_OFFSETL);
writel(SNB_MBAR01_USD_ADDR >> 32,
ndev->reg_base + SNB_B2B_XLAT_OFFSETU);
ndev->conn_type = NTB_CONN_RP;
if (xeon_errata_workaround) {
- dev_err(&ndev->pdev->dev,
+ dev_err(&ndev->pdev->dev,
"NTB-RP disabled due to hardware errata. To disregard this warning and potentially lock-up the system, add the parameter 'xeon_errata_workaround=0'.\n");
return -EINVAL;
}
return IRQ_HANDLED;
}
-static int ntb_setup_msix(struct ntb_device *ndev)
+static int ntb_setup_snb_msix(struct ntb_device *ndev, int msix_entries)
{
struct pci_dev *pdev = ndev->pdev;
struct msix_entry *msix;
- int msix_entries;
int rc, i;
- u16 val;
- if (!pdev->msix_cap) {
- rc = -EIO;
- goto err;
- }
+ if (msix_entries < ndev->limits.msix_cnt)
+ return -ENOSPC;
- rc = pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &val);
- if (rc)
- goto err;
+ rc = pci_enable_msix_exact(pdev, ndev->msix_entries, msix_entries);
+ if (rc < 0)
+ return rc;
- msix_entries = msix_table_size(val);
- if (msix_entries > ndev->limits.msix_cnt) {
- rc = -EINVAL;
- goto err;
+ for (i = 0; i < msix_entries; i++) {
+ msix = &ndev->msix_entries[i];
+ WARN_ON(!msix->vector);
+
+ if (i == msix_entries - 1) {
+ rc = request_irq(msix->vector,
+ xeon_event_msix_irq, 0,
+ "ntb-event-msix", ndev);
+ if (rc)
+ goto err;
+ } else {
+ rc = request_irq(msix->vector,
+ xeon_callback_msix_irq, 0,
+ "ntb-callback-msix",
+ &ndev->db_cb[i]);
+ if (rc)
+ goto err;
+ }
}
- ndev->msix_entries = kmalloc(sizeof(struct msix_entry) * msix_entries,
- GFP_KERNEL);
- if (!ndev->msix_entries) {
- rc = -ENOMEM;
- goto err;
+ ndev->num_msix = msix_entries;
+ ndev->max_cbs = msix_entries - 1;
+
+ return 0;
+
+err:
+ while (--i >= 0) {
+ /* Code never reaches here for entry nr 'ndev->num_msix - 1' */
+ msix = &ndev->msix_entries[i];
+ free_irq(msix->vector, &ndev->db_cb[i]);
}
- for (i = 0; i < msix_entries; i++)
- ndev->msix_entries[i].entry = i;
+ pci_disable_msix(pdev);
+ ndev->num_msix = 0;
- rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
- if (rc < 0)
- goto err1;
- if (rc > 0) {
- /* On SNB, the link interrupt is always tied to 4th vector. If
- * we can't get all 4, then we can't use MSI-X.
- */
- if (ndev->hw_type != BWD_HW) {
- rc = -EIO;
- goto err1;
- }
+ return rc;
+}
- dev_warn(&pdev->dev,
- "Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
- rc);
- msix_entries = rc;
+static int ntb_setup_bwd_msix(struct ntb_device *ndev, int msix_entries)
+{
+ struct pci_dev *pdev = ndev->pdev;
+ struct msix_entry *msix;
+ int rc, i;
- rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
- if (rc)
- goto err1;
- }
+ msix_entries = pci_enable_msix_range(pdev, ndev->msix_entries,
+ 1, msix_entries);
+ if (msix_entries < 0)
+ return msix_entries;
for (i = 0; i < msix_entries; i++) {
msix = &ndev->msix_entries[i];
WARN_ON(!msix->vector);
- /* Use the last MSI-X vector for Link status */
- if (ndev->hw_type == BWD_HW) {
- rc = request_irq(msix->vector, bwd_callback_msix_irq, 0,
- "ntb-callback-msix", &ndev->db_cb[i]);
- if (rc)
- goto err2;
- } else {
- if (i == msix_entries - 1) {
- rc = request_irq(msix->vector,
- xeon_event_msix_irq, 0,
- "ntb-event-msix", ndev);
- if (rc)
- goto err2;
- } else {
- rc = request_irq(msix->vector,
- xeon_callback_msix_irq, 0,
- "ntb-callback-msix",
- &ndev->db_cb[i]);
- if (rc)
- goto err2;
- }
- }
+ rc = request_irq(msix->vector, bwd_callback_msix_irq, 0,
+ "ntb-callback-msix", &ndev->db_cb[i]);
+ if (rc)
+ goto err;
}
ndev->num_msix = msix_entries;
+ ndev->max_cbs = msix_entries;
+
+ return 0;
+
+err:
+ while (--i >= 0)
+ free_irq(msix->vector, &ndev->db_cb[i]);
+
+ pci_disable_msix(pdev);
+ ndev->num_msix = 0;
+
+ return rc;
+}
+
+static int ntb_setup_msix(struct ntb_device *ndev)
+{
+ struct pci_dev *pdev = ndev->pdev;
+ int msix_entries;
+ int rc, i;
+
+ msix_entries = pci_msix_vec_count(pdev);
+ if (msix_entries < 0) {
+ rc = msix_entries;
+ goto err;
+ } else if (msix_entries > ndev->limits.msix_cnt) {
+ rc = -EINVAL;
+ goto err;
+ }
+
+ ndev->msix_entries = kmalloc(sizeof(struct msix_entry) * msix_entries,
+ GFP_KERNEL);
+ if (!ndev->msix_entries) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < msix_entries; i++)
+ ndev->msix_entries[i].entry = i;
+
if (ndev->hw_type == BWD_HW)
- ndev->max_cbs = msix_entries;
+ rc = ntb_setup_bwd_msix(ndev, msix_entries);
else
- ndev->max_cbs = msix_entries - 1;
+ rc = ntb_setup_snb_msix(ndev, msix_entries);
+ if (rc)
+ goto err1;
return 0;
-err2:
- while (--i >= 0) {
- msix = &ndev->msix_entries[i];
- if (ndev->hw_type != BWD_HW && i == ndev->num_msix - 1)
- free_irq(msix->vector, ndev);
- else
- free_irq(msix->vector, &ndev->db_cb[i]);
- }
- pci_disable_msix(pdev);
err1:
kfree(ndev->msix_entries);
- dev_err(&pdev->dev, "Error allocating MSI-X interrupt\n");
err:
- ndev->num_msix = 0;
+ dev_err(&pdev->dev, "Error allocating MSI-X interrupt\n");
return rc;
}
free_irq(msix->vector, &ndev->db_cb[i]);
}
pci_disable_msix(pdev);
+ kfree(ndev->msix_entries);
} else {
free_irq(pdev->irq, ndev);
* Contact Information:
* Jon Mason <jon.mason@intel.com>
*/
+#include <linux/ntb.h>
#define PCI_DEVICE_ID_INTEL_NTB_B2B_JSF 0x3725
#define PCI_DEVICE_ID_INTEL_NTB_PS_JSF 0x3726
#define PCI_DEVICE_ID_INTEL_NTB_SS_HSX 0x2F0F
#define PCI_DEVICE_ID_INTEL_NTB_B2B_BWD 0x0C4E
-#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1)
-
#ifndef readq
static inline u64 readq(void __iomem *addr)
{
#define NTB_BAR_MASK ((1 << NTB_BAR_MMIO) | (1 << NTB_BAR_23) |\
(1 << NTB_BAR_45))
-#define NTB_LINK_DOWN 0
-#define NTB_LINK_UP 1
-
#define NTB_HB_TIMEOUT msecs_to_jiffies(1000)
#define NTB_MAX_NUM_MW 2
int db_num));
void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx);
int ntb_register_event_callback(struct ntb_device *ndev,
- void (*event_cb_func) (void *handle,
+ void (*event_cb_func)(void *handle,
enum ntb_hw_event event));
void ntb_unregister_event_callback(struct ntb_device *ndev);
int ntb_get_max_spads(struct ntb_device *ndev);
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/types.h>
-#include <linux/ntb.h>
#include "ntb_hw.h"
#define NTB_TRANSPORT_VERSION 3
struct ntb_rx_info __iomem *rx_info;
struct ntb_rx_info *remote_rx_info;
- void (*tx_handler) (struct ntb_transport_qp *qp, void *qp_data,
- void *data, int len);
+ void (*tx_handler)(struct ntb_transport_qp *qp, void *qp_data,
+ void *data, int len);
struct list_head tx_free_q;
spinlock_t ntb_tx_free_q_lock;
void __iomem *tx_mw;
unsigned int tx_max_entry;
unsigned int tx_max_frame;
- void (*rx_handler) (struct ntb_transport_qp *qp, void *qp_data,
- void *data, int len);
+ void (*rx_handler)(struct ntb_transport_qp *qp, void *qp_data,
+ void *data, int len);
struct list_head rx_pend_q;
struct list_head rx_free_q;
spinlock_t ntb_rx_pend_q_lock;
unsigned int rx_max_frame;
dma_cookie_t last_cookie;
- void (*event_handler) (void *data, int status);
+ void (*event_handler)(void *data, int status);
struct delayed_work link_work;
struct work_struct link_cleanup;
}
static struct ntb_queue_entry *ntb_list_rm(spinlock_t *lock,
- struct list_head *list)
+ struct list_head *list)
{
struct ntb_queue_entry *entry;
unsigned long flags;
}
static int ntb_transport_init_queue(struct ntb_transport *nt,
- unsigned int qp_num)
+ unsigned int qp_num)
{
struct ntb_transport_qp *qp;
unsigned int num_qps_mw, tx_size;
if (!chan)
goto err;
- if (len < copy_bytes)
+ if (len < copy_bytes)
goto err_wait;
device = chan->device;
return 0;
err:
- ntb_list_add(&qp->ntb_rx_pend_q_lock, &entry->entry,
- &qp->rx_pend_q);
+ ntb_list_add(&qp->ntb_rx_pend_q_lock, &entry->entry, &qp->rx_pend_q);
/* Ensure that the data is fully copied out before clearing the flag */
wmb();
hdr->flags = 0;
If you have an Acer Aspire One netbook, say Y or M
here.
+config ALIENWARE_WMI
+ tristate "Alienware Special feature control"
+ depends on ACPI
+ depends on LEDS_CLASS
+ depends on NEW_LEDS
+ depends on ACPI_WMI
+ ---help---
+ This is a driver for controlling Alienware BIOS driven
+ features. It exposes an interface for controlling the AlienFX
+ zones on Alienware machines that don't contain a dedicated AlienFX
+ USB MCU such as the X51 and X51-R2.
+
config ASUS_LAPTOP
tristate "Asus Laptop Extras"
depends on ACPI
be called hp_accel.
config HP_WIRELESS
- tristate "HP WIRELESS"
+ tristate "HP wireless button"
depends on ACPI
depends on INPUT
help
a paravirtualized device provided by QEMU; it lets a virtual machine
(guest) communicate panic events to the host.
-config INTEL_BAYTRAIL_MBI
- tristate
- depends on PCI
- ---help---
- Needed on Baytrail platforms for access to the IOSF Sideband Mailbox
- Interface. This is a requirement for systems that need to configure
- the PUNIT for power management features such as RAPL.
-
endif # X86_PLATFORM_DEVICES
obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
obj-$(CONFIG_PVPANIC) += pvpanic.o
-obj-$(CONFIG_INTEL_BAYTRAIL_MBI) += intel_baytrail.o
+obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o
--- /dev/null
+/*
+ * Alienware AlienFX control
+ *
+ * Copyright (C) 2014 Dell Inc <mario_limonciello@dell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/leds.h>
+
+#define LEGACY_CONTROL_GUID "A90597CE-A997-11DA-B012-B622A1EF5492"
+#define LEGACY_POWER_CONTROL_GUID "A80593CE-A997-11DA-B012-B622A1EF5492"
+#define WMAX_CONTROL_GUID "A70591CE-A997-11DA-B012-B622A1EF5492"
+
+#define WMAX_METHOD_HDMI_SOURCE 0x1
+#define WMAX_METHOD_HDMI_STATUS 0x2
+#define WMAX_METHOD_BRIGHTNESS 0x3
+#define WMAX_METHOD_ZONE_CONTROL 0x4
+
+MODULE_AUTHOR("Mario Limonciello <mario_limonciello@dell.com>");
+MODULE_DESCRIPTION("Alienware special feature control");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("wmi:" LEGACY_CONTROL_GUID);
+MODULE_ALIAS("wmi:" WMAX_CONTROL_GUID);
+
+enum INTERFACE_FLAGS {
+ LEGACY,
+ WMAX,
+};
+
+enum LEGACY_CONTROL_STATES {
+ LEGACY_RUNNING = 1,
+ LEGACY_BOOTING = 0,
+ LEGACY_SUSPEND = 3,
+};
+
+enum WMAX_CONTROL_STATES {
+ WMAX_RUNNING = 0xFF,
+ WMAX_BOOTING = 0,
+ WMAX_SUSPEND = 3,
+};
+
+struct quirk_entry {
+ u8 num_zones;
+};
+
+static struct quirk_entry *quirks;
+
+static struct quirk_entry quirk_unknown = {
+ .num_zones = 2,
+};
+
+static struct quirk_entry quirk_x51_family = {
+ .num_zones = 3,
+};
+
+static int dmi_matched(const struct dmi_system_id *dmi)
+{
+ quirks = dmi->driver_data;
+ return 1;
+}
+
+static struct dmi_system_id alienware_quirks[] = {
+ {
+ .callback = dmi_matched,
+ .ident = "Alienware X51 R1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51"),
+ },
+ .driver_data = &quirk_x51_family,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "Alienware X51 R2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Alienware"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Alienware X51 R2"),
+ },
+ .driver_data = &quirk_x51_family,
+ },
+ {}
+};
+
+struct color_platform {
+ u8 blue;
+ u8 green;
+ u8 red;
+} __packed;
+
+struct platform_zone {
+ u8 location;
+ struct device_attribute *attr;
+ struct color_platform colors;
+};
+
+struct wmax_brightness_args {
+ u32 led_mask;
+ u32 percentage;
+};
+
+struct hdmi_args {
+ u8 arg;
+};
+
+struct legacy_led_args {
+ struct color_platform colors;
+ u8 brightness;
+ u8 state;
+} __packed;
+
+struct wmax_led_args {
+ u32 led_mask;
+ struct color_platform colors;
+ u8 state;
+} __packed;
+
+static struct platform_device *platform_device;
+static struct device_attribute *zone_dev_attrs;
+static struct attribute **zone_attrs;
+static struct platform_zone *zone_data;
+
+static struct platform_driver platform_driver = {
+ .driver = {
+ .name = "alienware-wmi",
+ .owner = THIS_MODULE,
+ }
+};
+
+static struct attribute_group zone_attribute_group = {
+ .name = "rgb_zones",
+};
+
+static u8 interface;
+static u8 lighting_control_state;
+static u8 global_brightness;
+
+/*
+ * Helpers used for zone control
+*/
+static int parse_rgb(const char *buf, struct platform_zone *zone)
+{
+ long unsigned int rgb;
+ int ret;
+ union color_union {
+ struct color_platform cp;
+ int package;
+ } repackager;
+
+ ret = kstrtoul(buf, 16, &rgb);
+ if (ret)
+ return ret;
+
+ /* RGB triplet notation is 24-bit hexadecimal */
+ if (rgb > 0xFFFFFF)
+ return -EINVAL;
+
+ repackager.package = rgb & 0x0f0f0f0f;
+ pr_debug("alienware-wmi: r: %d g:%d b: %d\n",
+ repackager.cp.red, repackager.cp.green, repackager.cp.blue);
+ zone->colors = repackager.cp;
+ return 0;
+}
+
+static struct platform_zone *match_zone(struct device_attribute *attr)
+{
+ int i;
+ for (i = 0; i < quirks->num_zones; i++) {
+ if ((struct device_attribute *)zone_data[i].attr == attr) {
+ pr_debug("alienware-wmi: matched zone location: %d\n",
+ zone_data[i].location);
+ return &zone_data[i];
+ }
+ }
+ return NULL;
+}
+
+/*
+ * Individual RGB zone control
+*/
+static int alienware_update_led(struct platform_zone *zone)
+{
+ int method_id;
+ acpi_status status;
+ char *guid;
+ struct acpi_buffer input;
+ struct legacy_led_args legacy_args;
+ struct wmax_led_args wmax_args;
+ if (interface == WMAX) {
+ wmax_args.led_mask = 1 << zone->location;
+ wmax_args.colors = zone->colors;
+ wmax_args.state = lighting_control_state;
+ guid = WMAX_CONTROL_GUID;
+ method_id = WMAX_METHOD_ZONE_CONTROL;
+
+ input.length = (acpi_size) sizeof(wmax_args);
+ input.pointer = &wmax_args;
+ } else {
+ legacy_args.colors = zone->colors;
+ legacy_args.brightness = global_brightness;
+ legacy_args.state = 0;
+ if (lighting_control_state == LEGACY_BOOTING ||
+ lighting_control_state == LEGACY_SUSPEND) {
+ guid = LEGACY_POWER_CONTROL_GUID;
+ legacy_args.state = lighting_control_state;
+ } else
+ guid = LEGACY_CONTROL_GUID;
+ method_id = zone->location + 1;
+
+ input.length = (acpi_size) sizeof(legacy_args);
+ input.pointer = &legacy_args;
+ }
+ pr_debug("alienware-wmi: guid %s method %d\n", guid, method_id);
+
+ status = wmi_evaluate_method(guid, 1, method_id, &input, NULL);
+ if (ACPI_FAILURE(status))
+ pr_err("alienware-wmi: zone set failure: %u\n", status);
+ return ACPI_FAILURE(status);
+}
+
+static ssize_t zone_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_zone *target_zone;
+ target_zone = match_zone(attr);
+ if (target_zone == NULL)
+ return sprintf(buf, "red: -1, green: -1, blue: -1\n");
+ return sprintf(buf, "red: %d, green: %d, blue: %d\n",
+ target_zone->colors.red,
+ target_zone->colors.green, target_zone->colors.blue);
+
+}
+
+static ssize_t zone_set(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct platform_zone *target_zone;
+ int ret;
+ target_zone = match_zone(attr);
+ if (target_zone == NULL) {
+ pr_err("alienware-wmi: invalid target zone\n");
+ return 1;
+ }
+ ret = parse_rgb(buf, target_zone);
+ if (ret)
+ return ret;
+ ret = alienware_update_led(target_zone);
+ return ret ? ret : count;
+}
+
+/*
+ * LED Brightness (Global)
+*/
+static int wmax_brightness(int brightness)
+{
+ acpi_status status;
+ struct acpi_buffer input;
+ struct wmax_brightness_args args = {
+ .led_mask = 0xFF,
+ .percentage = brightness,
+ };
+ input.length = (acpi_size) sizeof(args);
+ input.pointer = &args;
+ status = wmi_evaluate_method(WMAX_CONTROL_GUID, 1,
+ WMAX_METHOD_BRIGHTNESS, &input, NULL);
+ if (ACPI_FAILURE(status))
+ pr_err("alienware-wmi: brightness set failure: %u\n", status);
+ return ACPI_FAILURE(status);
+}
+
+static void global_led_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ int ret;
+ global_brightness = brightness;
+ if (interface == WMAX)
+ ret = wmax_brightness(brightness);
+ else
+ ret = alienware_update_led(&zone_data[0]);
+ if (ret)
+ pr_err("LED brightness update failed\n");
+}
+
+static enum led_brightness global_led_get(struct led_classdev *led_cdev)
+{
+ return global_brightness;
+}
+
+static struct led_classdev global_led = {
+ .brightness_set = global_led_set,
+ .brightness_get = global_led_get,
+ .name = "alienware::global_brightness",
+};
+
+/*
+ * Lighting control state device attribute (Global)
+*/
+static ssize_t show_control_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ if (lighting_control_state == LEGACY_BOOTING)
+ return scnprintf(buf, PAGE_SIZE, "[booting] running suspend\n");
+ else if (lighting_control_state == LEGACY_SUSPEND)
+ return scnprintf(buf, PAGE_SIZE, "booting running [suspend]\n");
+ return scnprintf(buf, PAGE_SIZE, "booting [running] suspend\n");
+}
+
+static ssize_t store_control_state(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ long unsigned int val;
+ if (strcmp(buf, "booting\n") == 0)
+ val = LEGACY_BOOTING;
+ else if (strcmp(buf, "suspend\n") == 0)
+ val = LEGACY_SUSPEND;
+ else if (interface == LEGACY)
+ val = LEGACY_RUNNING;
+ else
+ val = WMAX_RUNNING;
+ lighting_control_state = val;
+ pr_debug("alienware-wmi: updated control state to %d\n",
+ lighting_control_state);
+ return count;
+}
+
+static DEVICE_ATTR(lighting_control_state, 0644, show_control_state,
+ store_control_state);
+
+static int alienware_zone_init(struct platform_device *dev)
+{
+ int i;
+ char buffer[10];
+ char *name;
+
+ if (interface == WMAX) {
+ global_led.max_brightness = 100;
+ lighting_control_state = WMAX_RUNNING;
+ } else if (interface == LEGACY) {
+ global_led.max_brightness = 0x0F;
+ lighting_control_state = LEGACY_RUNNING;
+ }
+ global_brightness = global_led.max_brightness;
+
+ /*
+ * - zone_dev_attrs num_zones + 1 is for individual zones and then
+ * null terminated
+ * - zone_attrs num_zones + 2 is for all attrs in zone_dev_attrs +
+ * the lighting control + null terminated
+ * - zone_data num_zones is for the distinct zones
+ */
+ zone_dev_attrs =
+ kzalloc(sizeof(struct device_attribute) * (quirks->num_zones + 1),
+ GFP_KERNEL);
+ if (!zone_dev_attrs)
+ return -ENOMEM;
+
+ zone_attrs =
+ kzalloc(sizeof(struct attribute *) * (quirks->num_zones + 2),
+ GFP_KERNEL);
+ if (!zone_attrs)
+ return -ENOMEM;
+
+ zone_data =
+ kzalloc(sizeof(struct platform_zone) * (quirks->num_zones),
+ GFP_KERNEL);
+ if (!zone_data)
+ return -ENOMEM;
+
+ for (i = 0; i < quirks->num_zones; i++) {
+ sprintf(buffer, "zone%02X", i);
+ name = kstrdup(buffer, GFP_KERNEL);
+ if (name == NULL)
+ return 1;
+ sysfs_attr_init(&zone_dev_attrs[i].attr);
+ zone_dev_attrs[i].attr.name = name;
+ zone_dev_attrs[i].attr.mode = 0644;
+ zone_dev_attrs[i].show = zone_show;
+ zone_dev_attrs[i].store = zone_set;
+ zone_data[i].location = i;
+ zone_attrs[i] = &zone_dev_attrs[i].attr;
+ zone_data[i].attr = &zone_dev_attrs[i];
+ }
+ zone_attrs[quirks->num_zones] = &dev_attr_lighting_control_state.attr;
+ zone_attribute_group.attrs = zone_attrs;
+
+ led_classdev_register(&dev->dev, &global_led);
+
+ return sysfs_create_group(&dev->dev.kobj, &zone_attribute_group);
+}
+
+static void alienware_zone_exit(struct platform_device *dev)
+{
+ sysfs_remove_group(&dev->dev.kobj, &zone_attribute_group);
+ led_classdev_unregister(&global_led);
+ if (zone_dev_attrs) {
+ int i;
+ for (i = 0; i < quirks->num_zones; i++)
+ kfree(zone_dev_attrs[i].attr.name);
+ }
+ kfree(zone_dev_attrs);
+ kfree(zone_data);
+ kfree(zone_attrs);
+}
+
+/*
+ The HDMI mux sysfs node indicates the status of the HDMI input mux.
+ It can toggle between standard system GPU output and HDMI input.
+*/
+static ssize_t show_hdmi(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ acpi_status status;
+ struct acpi_buffer input;
+ union acpi_object *obj;
+ u32 tmp = 0;
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct hdmi_args in_args = {
+ .arg = 0,
+ };
+ input.length = (acpi_size) sizeof(in_args);
+ input.pointer = &in_args;
+ status = wmi_evaluate_method(WMAX_CONTROL_GUID, 1,
+ WMAX_METHOD_HDMI_STATUS, &input, &output);
+
+ if (ACPI_SUCCESS(status)) {
+ obj = (union acpi_object *)output.pointer;
+ if (obj && obj->type == ACPI_TYPE_INTEGER)
+ tmp = (u32) obj->integer.value;
+ if (tmp == 1)
+ return scnprintf(buf, PAGE_SIZE,
+ "[input] gpu unknown\n");
+ else if (tmp == 2)
+ return scnprintf(buf, PAGE_SIZE,
+ "input [gpu] unknown\n");
+ }
+ pr_err("alienware-wmi: unknown HDMI status: %d\n", status);
+ return scnprintf(buf, PAGE_SIZE, "input gpu [unknown]\n");
+}
+
+static ssize_t toggle_hdmi(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct acpi_buffer input;
+ acpi_status status;
+ struct hdmi_args args;
+ if (strcmp(buf, "gpu\n") == 0)
+ args.arg = 1;
+ else if (strcmp(buf, "input\n") == 0)
+ args.arg = 2;
+ else
+ args.arg = 3;
+ pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf);
+ input.length = (acpi_size) sizeof(args);
+ input.pointer = &args;
+ status = wmi_evaluate_method(WMAX_CONTROL_GUID, 1,
+ WMAX_METHOD_HDMI_SOURCE, &input, NULL);
+ if (ACPI_FAILURE(status))
+ pr_err("alienware-wmi: HDMI toggle failed: results: %u\n",
+ status);
+ return count;
+}
+
+static DEVICE_ATTR(hdmi, S_IRUGO | S_IWUSR, show_hdmi, toggle_hdmi);
+
+static void remove_hdmi(struct platform_device *device)
+{
+ device_remove_file(&device->dev, &dev_attr_hdmi);
+}
+
+static int create_hdmi(void)
+{
+ int ret = -ENOMEM;
+ ret = device_create_file(&platform_device->dev, &dev_attr_hdmi);
+ if (ret)
+ goto error_create_hdmi;
+ return 0;
+
+error_create_hdmi:
+ remove_hdmi(platform_device);
+ return ret;
+}
+
+static int __init alienware_wmi_init(void)
+{
+ int ret;
+
+ if (wmi_has_guid(LEGACY_CONTROL_GUID))
+ interface = LEGACY;
+ else if (wmi_has_guid(WMAX_CONTROL_GUID))
+ interface = WMAX;
+ else {
+ pr_warn("alienware-wmi: No known WMI GUID found\n");
+ return -ENODEV;
+ }
+
+ dmi_check_system(alienware_quirks);
+ if (quirks == NULL)
+ quirks = &quirk_unknown;
+
+ ret = platform_driver_register(&platform_driver);
+ if (ret)
+ goto fail_platform_driver;
+ platform_device = platform_device_alloc("alienware-wmi", -1);
+ if (!platform_device) {
+ ret = -ENOMEM;
+ goto fail_platform_device1;
+ }
+ ret = platform_device_add(platform_device);
+ if (ret)
+ goto fail_platform_device2;
+
+ if (interface == WMAX) {
+ ret = create_hdmi();
+ if (ret)
+ goto fail_prep_hdmi;
+ }
+
+ ret = alienware_zone_init(platform_device);
+ if (ret)
+ goto fail_prep_zones;
+
+ return 0;
+
+fail_prep_zones:
+ alienware_zone_exit(platform_device);
+fail_prep_hdmi:
+ platform_device_del(platform_device);
+fail_platform_device2:
+ platform_device_put(platform_device);
+fail_platform_device1:
+ platform_driver_unregister(&platform_driver);
+fail_platform_driver:
+ return ret;
+}
+
+module_init(alienware_wmi_init);
+
+static void __exit alienware_wmi_exit(void)
+{
+ if (platform_device) {
+ alienware_zone_exit(platform_device);
+ remove_hdmi(platform_device);
+ platform_device_unregister(platform_device);
+ platform_driver_unregister(&platform_driver);
+ }
+}
+
+module_exit(alienware_wmi_exit);
KEY_LEFTALT
};
+static unsigned short keymap_Lifebook_T901[KEYMAP_LEN] __initdata = {
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_SCROLLDOWN,
+ KEY_SCROLLUP,
+ KEY_CYCLEWINDOWS,
+ KEY_LEFTCTRL,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_LEFTMETA
+};
+
+static unsigned short keymap_Lifebook_T902[KEYMAP_LEN] __initdata = {
+ KEY_RESERVED,
+ KEY_VOLUMEDOWN,
+ KEY_VOLUMEUP,
+ KEY_CYCLEWINDOWS,
+ KEY_PROG1,
+ KEY_PROG2,
+ KEY_LEFTMETA,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+};
+
static unsigned short keymap_Lifebook_U810[KEYMAP_LEN] __initdata = {
KEY_RESERVED,
KEY_RESERVED,
}
static const struct dmi_system_id dmi_ids[] __initconst = {
+ {
+ .callback = fujitsu_dmi_lifebook,
+ .ident = "Fujitsu Lifebook T901",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook T901")
+ },
+ .driver_data = keymap_Lifebook_T901
+ },
+ {
+ .callback = fujitsu_dmi_lifebook,
+ .ident = "Fujitsu Lifebook T901",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T901")
+ },
+ .driver_data = keymap_Lifebook_T901
+ },
+ {
+ .callback = fujitsu_dmi_lifebook,
+ .ident = "Fujitsu Lifebook T902",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T902")
+ },
+ .driver_data = keymap_Lifebook_T902
+ },
{
.callback = fujitsu_dmi_lifebook,
.ident = "Fujitsu Siemens P/T Series",
+++ /dev/null
-/*
- * Baytrail IOSF-SB MailBox Interface Driver
- * Copyright (c) 2013, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- *
- * The IOSF-SB is a fabric bus available on Atom based SOC's that uses a
- * mailbox interface (MBI) to communicate with mutiple devices. This
- * driver implements BayTrail-specific access to this interface.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-
-#include "intel_baytrail.h"
-
-static DEFINE_SPINLOCK(iosf_mbi_lock);
-
-static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset)
-{
- return (op << 24) | (port << 16) | (offset << 8) | BT_MBI_ENABLE;
-}
-
-static struct pci_dev *mbi_pdev; /* one mbi device */
-
-/* Hold lock before calling */
-static int iosf_mbi_pci_read_mdr(u32 mcrx, u32 mcr, u32 *mdr)
-{
- int result;
-
- if (!mbi_pdev)
- return -ENODEV;
-
- if (mcrx) {
- result = pci_write_config_dword(mbi_pdev,
- BT_MBI_MCRX_OFFSET, mcrx);
- if (result < 0)
- goto iosf_mbi_read_err;
- }
-
- result = pci_write_config_dword(mbi_pdev,
- BT_MBI_MCR_OFFSET, mcr);
- if (result < 0)
- goto iosf_mbi_read_err;
-
- result = pci_read_config_dword(mbi_pdev,
- BT_MBI_MDR_OFFSET, mdr);
- if (result < 0)
- goto iosf_mbi_read_err;
-
- return 0;
-
-iosf_mbi_read_err:
- dev_err(&mbi_pdev->dev, "error: PCI config operation returned %d\n",
- result);
- return result;
-}
-
-/* Hold lock before calling */
-static int iosf_mbi_pci_write_mdr(u32 mcrx, u32 mcr, u32 mdr)
-{
- int result;
-
- if (!mbi_pdev)
- return -ENODEV;
-
- result = pci_write_config_dword(mbi_pdev,
- BT_MBI_MDR_OFFSET, mdr);
- if (result < 0)
- goto iosf_mbi_write_err;
-
- if (mcrx) {
- result = pci_write_config_dword(mbi_pdev,
- BT_MBI_MCRX_OFFSET, mcrx);
- if (result < 0)
- goto iosf_mbi_write_err;
- }
-
- result = pci_write_config_dword(mbi_pdev,
- BT_MBI_MCR_OFFSET, mcr);
- if (result < 0)
- goto iosf_mbi_write_err;
-
- return 0;
-
-iosf_mbi_write_err:
- dev_err(&mbi_pdev->dev, "error: PCI config operation returned %d\n",
- result);
- return result;
-}
-
-int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
-{
- u32 mcr, mcrx;
- unsigned long flags;
- int ret;
-
- /*Access to the GFX unit is handled by GPU code */
- BUG_ON(port == BT_MBI_UNIT_GFX);
-
- mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
- mcrx = offset & BT_MBI_MASK_HI;
-
- spin_lock_irqsave(&iosf_mbi_lock, flags);
- ret = iosf_mbi_pci_read_mdr(mcrx, mcr, mdr);
- spin_unlock_irqrestore(&iosf_mbi_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(bt_mbi_read);
-
-int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
-{
- u32 mcr, mcrx;
- unsigned long flags;
- int ret;
-
- /*Access to the GFX unit is handled by GPU code */
- BUG_ON(port == BT_MBI_UNIT_GFX);
-
- mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
- mcrx = offset & BT_MBI_MASK_HI;
-
- spin_lock_irqsave(&iosf_mbi_lock, flags);
- ret = iosf_mbi_pci_write_mdr(mcrx, mcr, mdr);
- spin_unlock_irqrestore(&iosf_mbi_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(bt_mbi_write);
-
-int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
-{
- u32 mcr, mcrx;
- u32 value;
- unsigned long flags;
- int ret;
-
- /*Access to the GFX unit is handled by GPU code */
- BUG_ON(port == BT_MBI_UNIT_GFX);
-
- mcr = iosf_mbi_form_mcr(opcode, port, offset & BT_MBI_MASK_LO);
- mcrx = offset & BT_MBI_MASK_HI;
-
- spin_lock_irqsave(&iosf_mbi_lock, flags);
-
- /* Read current mdr value */
- ret = iosf_mbi_pci_read_mdr(mcrx, mcr & BT_MBI_RD_MASK, &value);
- if (ret < 0) {
- spin_unlock_irqrestore(&iosf_mbi_lock, flags);
- return ret;
- }
-
- /* Apply mask */
- value &= ~mask;
- mdr &= mask;
- value |= mdr;
-
- /* Write back */
- ret = iosf_mbi_pci_write_mdr(mcrx, mcr | BT_MBI_WR_MASK, value);
-
- spin_unlock_irqrestore(&iosf_mbi_lock, flags);
-
- return ret;
-}
-EXPORT_SYMBOL(bt_mbi_modify);
-
-static int iosf_mbi_probe(struct pci_dev *pdev,
- const struct pci_device_id *unused)
-{
- int ret;
-
- ret = pci_enable_device(pdev);
- if (ret < 0) {
- dev_err(&pdev->dev, "error: could not enable device\n");
- return ret;
- }
-
- mbi_pdev = pci_dev_get(pdev);
- return 0;
-}
-
-static DEFINE_PCI_DEVICE_TABLE(iosf_mbi_pci_ids) = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F00) },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, iosf_mbi_pci_ids);
-
-static struct pci_driver iosf_mbi_pci_driver = {
- .name = "iosf_mbi_pci",
- .probe = iosf_mbi_probe,
- .id_table = iosf_mbi_pci_ids,
-};
-
-static int __init bt_mbi_init(void)
-{
- return pci_register_driver(&iosf_mbi_pci_driver);
-}
-
-static void __exit bt_mbi_exit(void)
-{
- pci_unregister_driver(&iosf_mbi_pci_driver);
- if (mbi_pdev) {
- pci_dev_put(mbi_pdev);
- mbi_pdev = NULL;
- }
-}
-
-module_init(bt_mbi_init);
-module_exit(bt_mbi_exit);
-
-MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
-MODULE_DESCRIPTION("BayTrail Mailbox Interface accessor");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-/*
- * intel_baytrail.h: MailBox access support for Intel BayTrail platforms
- */
-
-#ifndef INTEL_BAYTRAIL_MBI_SYMS_H
-#define INTEL_BAYTRAIL_MBI_SYMS_H
-
-#define BT_MBI_MCR_OFFSET 0xD0
-#define BT_MBI_MDR_OFFSET 0xD4
-#define BT_MBI_MCRX_OFFSET 0xD8
-
-#define BT_MBI_RD_MASK 0xFEFFFFFF
-#define BT_MBI_WR_MASK 0X01000000
-
-#define BT_MBI_MASK_HI 0xFFFFFF00
-#define BT_MBI_MASK_LO 0x000000FF
-#define BT_MBI_ENABLE 0xF0
-
-/* BT-SB unit access methods */
-#define BT_MBI_UNIT_AUNIT 0x00
-#define BT_MBI_UNIT_SMC 0x01
-#define BT_MBI_UNIT_CPU 0x02
-#define BT_MBI_UNIT_BUNIT 0x03
-#define BT_MBI_UNIT_PMC 0x04
-#define BT_MBI_UNIT_GFX 0x06
-#define BT_MBI_UNIT_SMI 0x0C
-#define BT_MBI_UNIT_USB 0x43
-#define BT_MBI_UNIT_SATA 0xA3
-#define BT_MBI_UNIT_PCIE 0xA6
-
-/* Read/write opcodes */
-#define BT_MBI_AUNIT_READ 0x10
-#define BT_MBI_AUNIT_WRITE 0x11
-#define BT_MBI_SMC_READ 0x10
-#define BT_MBI_SMC_WRITE 0x11
-#define BT_MBI_CPU_READ 0x10
-#define BT_MBI_CPU_WRITE 0x11
-#define BT_MBI_BUNIT_READ 0x10
-#define BT_MBI_BUNIT_WRITE 0x11
-#define BT_MBI_PMC_READ 0x06
-#define BT_MBI_PMC_WRITE 0x07
-#define BT_MBI_GFX_READ 0x00
-#define BT_MBI_GFX_WRITE 0x01
-#define BT_MBI_SMIO_READ 0x06
-#define BT_MBI_SMIO_WRITE 0x07
-#define BT_MBI_USB_READ 0x06
-#define BT_MBI_USB_WRITE 0x07
-#define BT_MBI_SATA_READ 0x00
-#define BT_MBI_SATA_WRITE 0x01
-#define BT_MBI_PCIE_READ 0x00
-#define BT_MBI_PCIE_WRITE 0x01
-
-/**
- * bt_mbi_read() - MailBox Interface read command
- * @port: port indicating subunit being accessed
- * @opcode: port specific read or write opcode
- * @offset: register address offset
- * @mdr: register data to be read
- *
- * Locking is handled by spinlock - cannot sleep.
- * Return: Nonzero on error
- */
-int bt_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr);
-
-/**
- * bt_mbi_write() - MailBox unmasked write command
- * @port: port indicating subunit being accessed
- * @opcode: port specific read or write opcode
- * @offset: register address offset
- * @mdr: register data to be written
- *
- * Locking is handled by spinlock - cannot sleep.
- * Return: Nonzero on error
- */
-int bt_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
-
-/**
- * bt_mbi_modify() - MailBox masked write command
- * @port: port indicating subunit being accessed
- * @opcode: port specific read or write opcode
- * @offset: register address offset
- * @mdr: register data being modified
- * @mask: mask indicating bits in mdr to be modified
- *
- * Locking is handled by spinlock - cannot sleep.
- * Return: Nonzero on error
- */
-int bt_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
-
-#endif /* INTEL_BAYTRAIL_MBI_SYMS_H */
/* hotkey input device driver */
+static int sleep_keydown_seen;
static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc)
{
struct input_dev *hotk_input_dev = pcc->input_dev;
"error getting hotkey status\n"));
return;
}
+
+ /* hack: some firmware sends no key down for sleep / hibernate */
+ if ((result & 0xf) == 0x7 || (result & 0xf) == 0xa) {
+ if (result & 0x80)
+ sleep_keydown_seen = 1;
+ if (!sleep_keydown_seen)
+ sparse_keymap_report_event(hotk_input_dev,
+ result & 0xf, 0x80, false);
+ }
+
if (!sparse_keymap_report_event(hotk_input_dev,
result & 0xf, result & 0x80, false))
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
pr_warn(fmt, ##__VA_ARGS__); \
} while (0)
-#define SONY_LAPTOP_DRIVER_VERSION "0.6"
-
#define SONY_NC_CLASS "sony-nc"
#define SONY_NC_HID "SNY5001"
#define SONY_NC_DRIVER_NAME "Sony Notebook Control Driver"
MODULE_AUTHOR("Stelian Pop, Mattia Dongili");
MODULE_DESCRIPTION("Sony laptop extras driver (SPIC and SNC ACPI device)");
MODULE_LICENSE("GPL");
-MODULE_VERSION(SONY_LAPTOP_DRIVER_VERSION);
static int debug;
module_param(debug, int, 0);
module_param(kbd_backlight, int, 0444);
MODULE_PARM_DESC(kbd_backlight,
"set this to 0 to disable keyboard backlight, "
- "1 to enable it (default: no change from current value)");
+ "1 to enable it with automatic control and 2 to have it always "
+ "on (default: no change from current value)");
static int kbd_backlight_timeout = -1;
module_param(kbd_backlight_timeout, int, 0444);
static int sony_nc_thermal_setup(struct platform_device *pd);
static void sony_nc_thermal_cleanup(struct platform_device *pd);
-static int sony_nc_lid_resume_setup(struct platform_device *pd);
+static int sony_nc_lid_resume_setup(struct platform_device *pd,
+ unsigned int handle);
static void sony_nc_lid_resume_cleanup(struct platform_device *pd);
static int sony_nc_gfx_switch_setup(struct platform_device *pd,
static int sony_nc_highspeed_charging_setup(struct platform_device *pd);
static void sony_nc_highspeed_charging_cleanup(struct platform_device *pd);
+static int sony_nc_lowbatt_setup(struct platform_device *pd);
+static void sony_nc_lowbatt_cleanup(struct platform_device *pd);
+
+static int sony_nc_fanspeed_setup(struct platform_device *pd);
+static void sony_nc_fanspeed_cleanup(struct platform_device *pd);
+
+static int sony_nc_usb_charge_setup(struct platform_device *pd);
+static void sony_nc_usb_charge_cleanup(struct platform_device *pd);
+
+static int sony_nc_panelid_setup(struct platform_device *pd);
+static void sony_nc_panelid_cleanup(struct platform_device *pd);
+
+static int sony_nc_smart_conn_setup(struct platform_device *pd);
+static void sony_nc_smart_conn_cleanup(struct platform_device *pd);
+
static int sony_nc_touchpad_setup(struct platform_device *pd,
unsigned int handle);
static void sony_nc_touchpad_cleanup(struct platform_device *pd);
{ 0x25, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0xa6, SONYPI_EVENT_HELP_PRESSED },
{ 0x26, SONYPI_EVENT_ANYBUTTON_RELEASED },
+ { 0xa8, SONYPI_EVENT_FNKEY_1 },
+ { 0x28, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0, 0 },
};
result);
break;
case 0x0119:
- result = sony_nc_lid_resume_setup(pf_device);
+ case 0x015D:
+ result = sony_nc_lid_resume_setup(pf_device, handle);
if (result)
pr_err("couldn't set up lid resume function (%d)\n",
result);
pr_err("couldn't set up keyboard backlight function (%d)\n",
result);
break;
+ case 0x0121:
+ result = sony_nc_lowbatt_setup(pf_device);
+ if (result)
+ pr_err("couldn't set up low battery function (%d)\n",
+ result);
+ break;
+ case 0x0149:
+ result = sony_nc_fanspeed_setup(pf_device);
+ if (result)
+ pr_err("couldn't set up fan speed function (%d)\n",
+ result);
+ break;
+ case 0x0155:
+ result = sony_nc_usb_charge_setup(pf_device);
+ if (result)
+ pr_err("couldn't set up USB charge support (%d)\n",
+ result);
+ break;
+ case 0x011D:
+ result = sony_nc_panelid_setup(pf_device);
+ if (result)
+ pr_err("couldn't set up panel ID function (%d)\n",
+ result);
+ break;
+ case 0x0168:
+ result = sony_nc_smart_conn_setup(pf_device);
+ if (result)
+ pr_err("couldn't set up smart connect support (%d)\n",
+ result);
+ break;
default:
continue;
}
sony_nc_battery_care_cleanup(pd);
break;
case 0x0119:
+ case 0x015D:
sony_nc_lid_resume_cleanup(pd);
break;
case 0x0122:
case 0x0163:
sony_nc_kbd_backlight_cleanup(pd, handle);
break;
+ case 0x0121:
+ sony_nc_lowbatt_cleanup(pd);
+ break;
+ case 0x0149:
+ sony_nc_fanspeed_cleanup(pd);
+ break;
+ case 0x0155:
+ sony_nc_usb_charge_cleanup(pd);
+ break;
+ case 0x011D:
+ sony_nc_panelid_cleanup(pd);
+ break;
+ case 0x0168:
+ sony_nc_smart_conn_cleanup(pd);
+ break;
default:
continue;
}
{
int result;
- if (value > 1)
+ if (value > 2)
return -EINVAL;
if (sony_call_snc_handle(kbdbl_ctl->handle,
return -EIO;
/* Try to turn the light on/off immediately */
- sony_call_snc_handle(kbdbl_ctl->handle,
- (value << 0x10) | (kbdbl_ctl->base + 0x100), &result);
+ if (value != 1)
+ sony_call_snc_handle(kbdbl_ctl->handle,
+ (value << 0x0f) | (kbdbl_ctl->base + 0x100),
+ &result);
kbdbl_ctl->mode = value;
#endif
/* resume on LID open */
+#define LID_RESUME_S5 0
+#define LID_RESUME_S4 1
+#define LID_RESUME_S3 2
+#define LID_RESUME_MAX 3
struct snc_lid_resume_control {
- struct device_attribute attrs[3];
+ struct device_attribute attrs[LID_RESUME_MAX];
unsigned int status;
+ int handle;
};
static struct snc_lid_resume_control *lid_ctl;
struct device_attribute *attr,
const char *buffer, size_t count)
{
- unsigned int result, pos;
+ unsigned int result;
unsigned long value;
+ unsigned int pos = LID_RESUME_S5;
if (count > 31)
return -EINVAL;
* +--------------+
* 2 1 0
*/
- if (strcmp(attr->attr.name, "lid_resume_S3") == 0)
- pos = 2;
- else if (strcmp(attr->attr.name, "lid_resume_S4") == 0)
- pos = 1;
- else if (strcmp(attr->attr.name, "lid_resume_S5") == 0)
- pos = 0;
- else
- return -EINVAL;
+ while (pos < LID_RESUME_MAX) {
+ if (&lid_ctl->attrs[pos].attr == &attr->attr)
+ break;
+ pos++;
+ }
+ if (pos == LID_RESUME_MAX)
+ return -EINVAL;
if (value)
value = lid_ctl->status | (1 << pos);
else
value = lid_ctl->status & ~(1 << pos);
- if (sony_call_snc_handle(0x0119, value << 0x10 | 0x0100, &result))
+ if (sony_call_snc_handle(lid_ctl->handle, value << 0x10 | 0x0100,
+ &result))
return -EIO;
lid_ctl->status = value;
}
static ssize_t sony_nc_lid_resume_show(struct device *dev,
- struct device_attribute *attr, char *buffer)
+ struct device_attribute *attr,
+ char *buffer)
{
- unsigned int pos;
+ unsigned int pos = LID_RESUME_S5;
- if (strcmp(attr->attr.name, "lid_resume_S3") == 0)
- pos = 2;
- else if (strcmp(attr->attr.name, "lid_resume_S4") == 0)
- pos = 1;
- else if (strcmp(attr->attr.name, "lid_resume_S5") == 0)
- pos = 0;
- else
- return -EINVAL;
-
- return snprintf(buffer, PAGE_SIZE, "%d\n",
- (lid_ctl->status >> pos) & 0x01);
+ while (pos < LID_RESUME_MAX) {
+ if (&lid_ctl->attrs[pos].attr == &attr->attr)
+ return snprintf(buffer, PAGE_SIZE, "%d\n",
+ (lid_ctl->status >> pos) & 0x01);
+ pos++;
+ }
+ return -EINVAL;
}
-static int sony_nc_lid_resume_setup(struct platform_device *pd)
+static int sony_nc_lid_resume_setup(struct platform_device *pd,
+ unsigned int handle)
{
unsigned int result;
int i;
- if (sony_call_snc_handle(0x0119, 0x0000, &result))
+ if (sony_call_snc_handle(handle, 0x0000, &result))
return -EIO;
lid_ctl = kzalloc(sizeof(struct snc_lid_resume_control), GFP_KERNEL);
return -ENOMEM;
lid_ctl->status = result & 0x7;
+ lid_ctl->handle = handle;
sysfs_attr_init(&lid_ctl->attrs[0].attr);
- lid_ctl->attrs[0].attr.name = "lid_resume_S3";
- lid_ctl->attrs[0].attr.mode = S_IRUGO | S_IWUSR;
- lid_ctl->attrs[0].show = sony_nc_lid_resume_show;
- lid_ctl->attrs[0].store = sony_nc_lid_resume_store;
-
- sysfs_attr_init(&lid_ctl->attrs[1].attr);
- lid_ctl->attrs[1].attr.name = "lid_resume_S4";
- lid_ctl->attrs[1].attr.mode = S_IRUGO | S_IWUSR;
- lid_ctl->attrs[1].show = sony_nc_lid_resume_show;
- lid_ctl->attrs[1].store = sony_nc_lid_resume_store;
-
- sysfs_attr_init(&lid_ctl->attrs[2].attr);
- lid_ctl->attrs[2].attr.name = "lid_resume_S5";
- lid_ctl->attrs[2].attr.mode = S_IRUGO | S_IWUSR;
- lid_ctl->attrs[2].show = sony_nc_lid_resume_show;
- lid_ctl->attrs[2].store = sony_nc_lid_resume_store;
-
- for (i = 0; i < 3; i++) {
+ lid_ctl->attrs[LID_RESUME_S5].attr.name = "lid_resume_S5";
+ lid_ctl->attrs[LID_RESUME_S5].attr.mode = S_IRUGO | S_IWUSR;
+ lid_ctl->attrs[LID_RESUME_S5].show = sony_nc_lid_resume_show;
+ lid_ctl->attrs[LID_RESUME_S5].store = sony_nc_lid_resume_store;
+
+ if (handle == 0x0119) {
+ sysfs_attr_init(&lid_ctl->attrs[1].attr);
+ lid_ctl->attrs[LID_RESUME_S4].attr.name = "lid_resume_S4";
+ lid_ctl->attrs[LID_RESUME_S4].attr.mode = S_IRUGO | S_IWUSR;
+ lid_ctl->attrs[LID_RESUME_S4].show = sony_nc_lid_resume_show;
+ lid_ctl->attrs[LID_RESUME_S4].store = sony_nc_lid_resume_store;
+
+ sysfs_attr_init(&lid_ctl->attrs[2].attr);
+ lid_ctl->attrs[LID_RESUME_S3].attr.name = "lid_resume_S3";
+ lid_ctl->attrs[LID_RESUME_S3].attr.mode = S_IRUGO | S_IWUSR;
+ lid_ctl->attrs[LID_RESUME_S3].show = sony_nc_lid_resume_show;
+ lid_ctl->attrs[LID_RESUME_S3].store = sony_nc_lid_resume_store;
+ }
+ for (i = 0; i < LID_RESUME_MAX &&
+ lid_ctl->attrs[LID_RESUME_S3].attr.name; i++) {
result = device_create_file(&pd->dev, &lid_ctl->attrs[i]);
if (result)
goto liderror;
int i;
if (lid_ctl) {
- for (i = 0; i < 3; i++)
+ for (i = 0; i < LID_RESUME_MAX; i++) {
+ if (!lid_ctl->attrs[i].attr.name)
+ break;
+
device_remove_file(&pd->dev, &lid_ctl->attrs[i]);
+ }
kfree(lid_ctl);
lid_ctl = NULL;
}
}
+/* low battery function */
+static struct device_attribute *lowbatt_handle;
+
+static ssize_t sony_nc_lowbatt_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ unsigned int result;
+ unsigned long value;
+
+ if (count > 31)
+ return -EINVAL;
+
+ if (kstrtoul(buffer, 10, &value) || value > 1)
+ return -EINVAL;
+
+ if (sony_call_snc_handle(0x0121, value << 8, &result))
+ return -EIO;
+
+ return count;
+}
+
+static ssize_t sony_nc_lowbatt_show(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ unsigned int result;
+
+ if (sony_call_snc_handle(0x0121, 0x0200, &result))
+ return -EIO;
+
+ return snprintf(buffer, PAGE_SIZE, "%d\n", result & 1);
+}
+
+static int sony_nc_lowbatt_setup(struct platform_device *pd)
+{
+ unsigned int result;
+
+ lowbatt_handle = kzalloc(sizeof(struct device_attribute), GFP_KERNEL);
+ if (!lowbatt_handle)
+ return -ENOMEM;
+
+ sysfs_attr_init(&lowbatt_handle->attr);
+ lowbatt_handle->attr.name = "lowbatt_hibernate";
+ lowbatt_handle->attr.mode = S_IRUGO | S_IWUSR;
+ lowbatt_handle->show = sony_nc_lowbatt_show;
+ lowbatt_handle->store = sony_nc_lowbatt_store;
+
+ result = device_create_file(&pd->dev, lowbatt_handle);
+ if (result) {
+ kfree(lowbatt_handle);
+ lowbatt_handle = NULL;
+ return result;
+ }
+
+ return 0;
+}
+
+static void sony_nc_lowbatt_cleanup(struct platform_device *pd)
+{
+ if (lowbatt_handle) {
+ device_remove_file(&pd->dev, lowbatt_handle);
+ kfree(lowbatt_handle);
+ lowbatt_handle = NULL;
+ }
+}
+
+/* fan speed function */
+static struct device_attribute *fan_handle, *hsf_handle;
+
+static ssize_t sony_nc_hsfan_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ unsigned int result;
+ unsigned long value;
+
+ if (count > 31)
+ return -EINVAL;
+
+ if (kstrtoul(buffer, 10, &value) || value > 1)
+ return -EINVAL;
+
+ if (sony_call_snc_handle(0x0149, value << 0x10 | 0x0200, &result))
+ return -EIO;
+
+ return count;
+}
+
+static ssize_t sony_nc_hsfan_show(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ unsigned int result;
+
+ if (sony_call_snc_handle(0x0149, 0x0100, &result))
+ return -EIO;
+
+ return snprintf(buffer, PAGE_SIZE, "%d\n", result & 0x01);
+}
+
+static ssize_t sony_nc_fanspeed_show(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ unsigned int result;
+
+ if (sony_call_snc_handle(0x0149, 0x0300, &result))
+ return -EIO;
+
+ return snprintf(buffer, PAGE_SIZE, "%d\n", result & 0xff);
+}
+
+static int sony_nc_fanspeed_setup(struct platform_device *pd)
+{
+ unsigned int result;
+
+ fan_handle = kzalloc(sizeof(struct device_attribute), GFP_KERNEL);
+ if (!fan_handle)
+ return -ENOMEM;
+
+ hsf_handle = kzalloc(sizeof(struct device_attribute), GFP_KERNEL);
+ if (!hsf_handle) {
+ result = -ENOMEM;
+ goto out_hsf_handle_alloc;
+ }
+
+ sysfs_attr_init(&fan_handle->attr);
+ fan_handle->attr.name = "fanspeed";
+ fan_handle->attr.mode = S_IRUGO;
+ fan_handle->show = sony_nc_fanspeed_show;
+ fan_handle->store = NULL;
+
+ sysfs_attr_init(&hsf_handle->attr);
+ hsf_handle->attr.name = "fan_forced";
+ hsf_handle->attr.mode = S_IRUGO | S_IWUSR;
+ hsf_handle->show = sony_nc_hsfan_show;
+ hsf_handle->store = sony_nc_hsfan_store;
+
+ result = device_create_file(&pd->dev, fan_handle);
+ if (result)
+ goto out_fan_handle;
+
+ result = device_create_file(&pd->dev, hsf_handle);
+ if (result)
+ goto out_hsf_handle;
+
+ return 0;
+
+out_hsf_handle:
+ device_remove_file(&pd->dev, fan_handle);
+
+out_fan_handle:
+ kfree(hsf_handle);
+ hsf_handle = NULL;
+
+out_hsf_handle_alloc:
+ kfree(fan_handle);
+ fan_handle = NULL;
+ return result;
+}
+
+static void sony_nc_fanspeed_cleanup(struct platform_device *pd)
+{
+ if (fan_handle) {
+ device_remove_file(&pd->dev, fan_handle);
+ kfree(fan_handle);
+ fan_handle = NULL;
+ }
+ if (hsf_handle) {
+ device_remove_file(&pd->dev, hsf_handle);
+ kfree(hsf_handle);
+ hsf_handle = NULL;
+ }
+}
+
+/* USB charge function */
+static struct device_attribute *uc_handle;
+
+static ssize_t sony_nc_usb_charge_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ unsigned int result;
+ unsigned long value;
+
+ if (count > 31)
+ return -EINVAL;
+
+ if (kstrtoul(buffer, 10, &value) || value > 1)
+ return -EINVAL;
+
+ if (sony_call_snc_handle(0x0155, value << 0x10 | 0x0100, &result))
+ return -EIO;
+
+ return count;
+}
+
+static ssize_t sony_nc_usb_charge_show(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ unsigned int result;
+
+ if (sony_call_snc_handle(0x0155, 0x0000, &result))
+ return -EIO;
+
+ return snprintf(buffer, PAGE_SIZE, "%d\n", result & 0x01);
+}
+
+static int sony_nc_usb_charge_setup(struct platform_device *pd)
+{
+ unsigned int result;
+
+ if (sony_call_snc_handle(0x0155, 0x0000, &result) || !(result & 0x01)) {
+ /* some models advertise the handle but have no implementation
+ * for it
+ */
+ pr_info("No USB Charge capability found\n");
+ return 0;
+ }
+
+ uc_handle = kzalloc(sizeof(struct device_attribute), GFP_KERNEL);
+ if (!uc_handle)
+ return -ENOMEM;
+
+ sysfs_attr_init(&uc_handle->attr);
+ uc_handle->attr.name = "usb_charge";
+ uc_handle->attr.mode = S_IRUGO | S_IWUSR;
+ uc_handle->show = sony_nc_usb_charge_show;
+ uc_handle->store = sony_nc_usb_charge_store;
+
+ result = device_create_file(&pd->dev, uc_handle);
+ if (result) {
+ kfree(uc_handle);
+ uc_handle = NULL;
+ return result;
+ }
+
+ return 0;
+}
+
+static void sony_nc_usb_charge_cleanup(struct platform_device *pd)
+{
+ if (uc_handle) {
+ device_remove_file(&pd->dev, uc_handle);
+ kfree(uc_handle);
+ uc_handle = NULL;
+ }
+}
+
+/* Panel ID function */
+static struct device_attribute *panel_handle;
+
+static ssize_t sony_nc_panelid_show(struct device *dev,
+ struct device_attribute *attr, char *buffer)
+{
+ unsigned int result;
+
+ if (sony_call_snc_handle(0x011D, 0x0000, &result))
+ return -EIO;
+
+ return snprintf(buffer, PAGE_SIZE, "%d\n", result);
+}
+
+static int sony_nc_panelid_setup(struct platform_device *pd)
+{
+ unsigned int result;
+
+ panel_handle = kzalloc(sizeof(struct device_attribute), GFP_KERNEL);
+ if (!panel_handle)
+ return -ENOMEM;
+
+ sysfs_attr_init(&panel_handle->attr);
+ panel_handle->attr.name = "panel_id";
+ panel_handle->attr.mode = S_IRUGO;
+ panel_handle->show = sony_nc_panelid_show;
+ panel_handle->store = NULL;
+
+ result = device_create_file(&pd->dev, panel_handle);
+ if (result) {
+ kfree(panel_handle);
+ panel_handle = NULL;
+ return result;
+ }
+
+ return 0;
+}
+
+static void sony_nc_panelid_cleanup(struct platform_device *pd)
+{
+ if (panel_handle) {
+ device_remove_file(&pd->dev, panel_handle);
+ kfree(panel_handle);
+ panel_handle = NULL;
+ }
+}
+
+/* smart connect function */
+static struct device_attribute *sc_handle;
+
+static ssize_t sony_nc_smart_conn_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ unsigned int result;
+ unsigned long value;
+
+ if (count > 31)
+ return -EINVAL;
+
+ if (kstrtoul(buffer, 10, &value) || value > 1)
+ return -EINVAL;
+
+ if (sony_call_snc_handle(0x0168, value << 0x10, &result))
+ return -EIO;
+
+ return count;
+}
+
+static int sony_nc_smart_conn_setup(struct platform_device *pd)
+{
+ unsigned int result;
+
+ sc_handle = kzalloc(sizeof(struct device_attribute), GFP_KERNEL);
+ if (!sc_handle)
+ return -ENOMEM;
+
+ sysfs_attr_init(&sc_handle->attr);
+ sc_handle->attr.name = "smart_connect";
+ sc_handle->attr.mode = S_IWUSR;
+ sc_handle->show = NULL;
+ sc_handle->store = sony_nc_smart_conn_store;
+
+ result = device_create_file(&pd->dev, sc_handle);
+ if (result) {
+ kfree(sc_handle);
+ sc_handle = NULL;
+ return result;
+ }
+
+ return 0;
+}
+
+static void sony_nc_smart_conn_cleanup(struct platform_device *pd)
+{
+ if (sc_handle) {
+ device_remove_file(&pd->dev, sc_handle);
+ kfree(sc_handle);
+ sc_handle = NULL;
+ }
+}
+
/* Touchpad enable/disable */
struct touchpad_control {
struct device_attribute attr;
int result = 0;
struct sony_nc_value *item;
- pr_info("%s v%s\n", SONY_NC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
-
sony_nc_acpi_device = device;
strcpy(acpi_device_class(device), "sony/hotkey");
}
}
+ pr_info("SNC setup done.\n");
return 0;
out_sysfs:
struct sony_pic_ioport *io, *tmp_io;
struct sony_pic_irq *irq, *tmp_irq;
- pr_info("%s v%s\n", SONY_PIC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION);
-
spic_dev.acpi_dev = device;
strcpy(acpi_device_class(device), "sony/hotkey");
sony_pic_detect_device_type(&spic_dev);
if (result)
goto err_remove_pf;
+ pr_info("SPIC setup done.\n");
return 0;
err_remove_pf:
}
}
-static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
- struct tp_nvram_state *newn,
- const u32 event_mask)
-{
-
#define TPACPI_COMPARE_KEY(__scancode, __member) \
- do { \
- if ((event_mask & (1 << __scancode)) && \
- oldn->__member != newn->__member) \
- tpacpi_hotkey_send_key(__scancode); \
- } while (0)
+do { \
+ if ((event_mask & (1 << __scancode)) && \
+ oldn->__member != newn->__member) \
+ tpacpi_hotkey_send_key(__scancode); \
+} while (0)
#define TPACPI_MAY_SEND_KEY(__scancode) \
- do { \
- if (event_mask & (1 << __scancode)) \
- tpacpi_hotkey_send_key(__scancode); \
- } while (0)
+do { \
+ if (event_mask & (1 << __scancode)) \
+ tpacpi_hotkey_send_key(__scancode); \
+} while (0)
- void issue_volchange(const unsigned int oldvol,
- const unsigned int newvol)
- {
- unsigned int i = oldvol;
+static void issue_volchange(const unsigned int oldvol,
+ const unsigned int newvol,
+ const u32 event_mask)
+{
+ unsigned int i = oldvol;
- while (i > newvol) {
- TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEDOWN);
- i--;
- }
- while (i < newvol) {
- TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEUP);
- i++;
- }
+ while (i > newvol) {
+ TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEDOWN);
+ i--;
+ }
+ while (i < newvol) {
+ TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEUP);
+ i++;
}
+}
- void issue_brightnesschange(const unsigned int oldbrt,
- const unsigned int newbrt)
- {
- unsigned int i = oldbrt;
+static void issue_brightnesschange(const unsigned int oldbrt,
+ const unsigned int newbrt,
+ const u32 event_mask)
+{
+ unsigned int i = oldbrt;
- while (i > newbrt) {
- TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_FNEND);
- i--;
- }
- while (i < newbrt) {
- TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_FNHOME);
- i++;
- }
+ while (i > newbrt) {
+ TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_FNEND);
+ i--;
}
+ while (i < newbrt) {
+ TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_FNHOME);
+ i++;
+ }
+}
+
+static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
+ struct tp_nvram_state *newn,
+ const u32 event_mask)
+{
TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_THINKPAD, thinkpad_toggle);
TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNSPACE, zoom_toggle);
oldn->volume_level != newn->volume_level) {
/* recently muted, or repeated mute keypress, or
* multiple presses ending in mute */
- issue_volchange(oldn->volume_level, newn->volume_level);
+ issue_volchange(oldn->volume_level, newn->volume_level,
+ event_mask);
TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_MUTE);
}
} else {
TPACPI_MAY_SEND_KEY(TP_ACPI_HOTKEYSCAN_VOLUMEUP);
}
if (oldn->volume_level != newn->volume_level) {
- issue_volchange(oldn->volume_level, newn->volume_level);
+ issue_volchange(oldn->volume_level, newn->volume_level,
+ event_mask);
} else if (oldn->volume_toggle != newn->volume_toggle) {
/* repeated vol up/down keypress at end of scale ? */
if (newn->volume_level == 0)
/* handle brightness */
if (oldn->brightness_level != newn->brightness_level) {
issue_brightnesschange(oldn->brightness_level,
- newn->brightness_level);
+ newn->brightness_level, event_mask);
} else if (oldn->brightness_toggle != newn->brightness_toggle) {
/* repeated key presses that didn't change state */
if (newn->brightness_level == 0)
return (res < 0)? res : 1;
}
+/* Thinkpad X1 Carbon support 5 modes including Home mode, Web browser
+ * mode, Web conference mode, Function mode and Lay-flat mode.
+ * We support Home mode and Function mode currently.
+ *
+ * Will consider support rest of modes in future.
+ *
+ */
+enum ADAPTIVE_KEY_MODE {
+ HOME_MODE,
+ WEB_BROWSER_MODE,
+ WEB_CONFERENCE_MODE,
+ FUNCTION_MODE,
+ LAYFLAT_MODE
+};
+
+const int adaptive_keyboard_modes[] = {
+ HOME_MODE,
+/* WEB_BROWSER_MODE = 2,
+ WEB_CONFERENCE_MODE = 3, */
+ FUNCTION_MODE
+};
+
+#define DFR_CHANGE_ROW 0x101
+#define DFR_SHOW_QUICKVIEW_ROW 0x102
+
+/* press Fn key a while second, it will switch to Function Mode. Then
+ * release Fn key, previous mode be restored.
+ */
+static bool adaptive_keyboard_mode_is_saved;
+static int adaptive_keyboard_prev_mode;
+
+static int adaptive_keyboard_get_next_mode(int mode)
+{
+ size_t i;
+ size_t max_mode = ARRAY_SIZE(adaptive_keyboard_modes) - 1;
+
+ for (i = 0; i <= max_mode; i++) {
+ if (adaptive_keyboard_modes[i] == mode)
+ break;
+ }
+
+ if (i >= max_mode)
+ i = 0;
+ else
+ i++;
+
+ return adaptive_keyboard_modes[i];
+}
+
+static bool adaptive_keyboard_hotkey_notify_hotkey(unsigned int scancode)
+{
+ u32 current_mode = 0;
+ int new_mode = 0;
+
+ switch (scancode) {
+ case DFR_CHANGE_ROW:
+ if (adaptive_keyboard_mode_is_saved) {
+ new_mode = adaptive_keyboard_prev_mode;
+ adaptive_keyboard_mode_is_saved = false;
+ } else {
+ if (!acpi_evalf(
+ hkey_handle, ¤t_mode,
+ "GTRW", "dd", 0)) {
+ pr_err("Cannot read adaptive keyboard mode\n");
+ return false;
+ } else {
+ new_mode = adaptive_keyboard_get_next_mode(
+ current_mode);
+ }
+ }
+
+ if (!acpi_evalf(hkey_handle, NULL, "STRW", "vd", new_mode)) {
+ pr_err("Cannot set adaptive keyboard mode\n");
+ return false;
+ }
+
+ return true;
+
+ case DFR_SHOW_QUICKVIEW_ROW:
+ if (!acpi_evalf(hkey_handle,
+ &adaptive_keyboard_prev_mode,
+ "GTRW", "dd", 0)) {
+ pr_err("Cannot read adaptive keyboard mode\n");
+ return false;
+ } else {
+ adaptive_keyboard_mode_is_saved = true;
+
+ if (!acpi_evalf(hkey_handle,
+ NULL, "STRW", "vd", FUNCTION_MODE)) {
+ pr_err("Cannot set adaptive keyboard mode\n");
+ return false;
+ }
+ }
+ return true;
+
+ default:
+ return false;
+ }
+}
+
static bool hotkey_notify_hotkey(const u32 hkey,
bool *send_acpi_ev,
bool *ignore_acpi_ev)
*ignore_acpi_ev = true;
}
return true;
+ } else {
+ return adaptive_keyboard_hotkey_notify_hotkey(scancode);
}
return false;
}
static void hotkey_suspend(void)
{
+ int hkeyv;
+
/* Do these on suspend, we get the events on early resume! */
hotkey_wakeup_reason = TP_ACPI_WAKEUP_NONE;
hotkey_autosleep_ack = 0;
+
+ /* save previous mode of adaptive keyboard of X1 Carbon */
+ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
+ if ((hkeyv >> 8) == 2) {
+ if (!acpi_evalf(hkey_handle,
+ &adaptive_keyboard_prev_mode,
+ "GTRW", "dd", 0)) {
+ pr_err("Cannot read adaptive keyboard mode.\n");
+ }
+ }
+ }
}
static void hotkey_resume(void)
{
+ int hkeyv;
+
tpacpi_disable_brightness_delay();
if (hotkey_status_set(true) < 0 ||
hotkey_wakeup_reason_notify_change();
hotkey_wakeup_hotunplug_complete_notify_change();
hotkey_poll_setup_safe(false);
+
+ /* restore previous mode of adapive keyboard of X1 Carbon */
+ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
+ if ((hkeyv >> 8) == 2) {
+ if (!acpi_evalf(hkey_handle,
+ NULL,
+ "STRW", "vd",
+ adaptive_keyboard_prev_mode)) {
+ pr_err("Cannot set adaptive keyboard mode.\n");
+ }
+ }
+ }
}
/* procfs -------------------------------------------------------------- */
tpacpi_led_set(i, false);
}
+static void mute_led_resume(void)
+{
+ int i;
+
+ for (i = 0; i < TPACPI_LED_MAX; i++) {
+ struct tp_led_table *t = &led_tables[i];
+ if (t->state >= 0)
+ mute_led_on_off(t, t->state);
+ }
+}
+
static struct ibm_struct mute_led_driver_data = {
.name = "mute_led",
.exit = mute_led_exit,
+ .resume = mute_led_resume,
};
/****************************************************************************
* Copyright (C) 2002-2004 John Belmonte
* Copyright (C) 2008 Philip Langdale
* Copyright (C) 2010 Pierre Ducroquet
+ * Copyright (C) 2014 Azael Avalos
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#define TOSHIBA_ACPI_VERSION "0.19"
+#define TOSHIBA_ACPI_VERSION "0.20"
#define PROC_INTERFACE_VERSION 1
#include <linux/kernel.h>
* However the ACPI methods seem to be incomplete in some areas (for
* example they allow setting, but not reading, the LCD brightness value),
* so this is still useful.
+ *
+ * SCI stands for "System Configuration Interface" which aim is to
+ * conceal differences in hardware between different models.
*/
#define HCI_WORDS 6
/* operations */
#define HCI_SET 0xff00
#define HCI_GET 0xfe00
+#define SCI_OPEN 0xf100
+#define SCI_CLOSE 0xf200
+#define SCI_GET 0xf300
+#define SCI_SET 0xf400
/* return codes */
#define HCI_SUCCESS 0x0000
#define HCI_FAILURE 0x1000
#define HCI_NOT_SUPPORTED 0x8000
#define HCI_EMPTY 0x8c00
+#define HCI_DATA_NOT_AVAILABLE 0x8d20
+#define HCI_NOT_INITIALIZED 0x8d50
+#define SCI_OPEN_CLOSE_OK 0x0044
+#define SCI_ALREADY_OPEN 0x8100
+#define SCI_NOT_OPENED 0x8200
+#define SCI_INPUT_DATA_ERROR 0x8300
+#define SCI_NOT_PRESENT 0x8600
/* registers */
#define HCI_FAN 0x0004
#define HCI_HOTKEY_EVENT 0x001e
#define HCI_LCD_BRIGHTNESS 0x002a
#define HCI_WIRELESS 0x0056
+#define HCI_ACCELEROMETER 0x006d
+#define HCI_KBD_ILLUMINATION 0x0095
+#define HCI_ECO_MODE 0x0097
+#define HCI_ACCELEROMETER2 0x00a6
+#define SCI_ILLUMINATION 0x014e
+#define SCI_KBD_ILLUM_STATUS 0x015c
+#define SCI_TOUCHPAD 0x050e
/* field definitions */
+#define HCI_ACCEL_MASK 0x7fff
#define HCI_HOTKEY_DISABLE 0x0b
#define HCI_HOTKEY_ENABLE 0x09
#define HCI_LCD_BRIGHTNESS_BITS 3
#define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS)
#define HCI_LCD_BRIGHTNESS_LEVELS (1 << HCI_LCD_BRIGHTNESS_BITS)
+#define HCI_MISC_SHIFT 0x10
#define HCI_VIDEO_OUT_LCD 0x1
#define HCI_VIDEO_OUT_CRT 0x2
#define HCI_VIDEO_OUT_TV 0x4
#define HCI_WIRELESS_BT_PRESENT 0x0f
#define HCI_WIRELESS_BT_ATTACH 0x40
#define HCI_WIRELESS_BT_POWER 0x80
+#define SCI_KBD_MODE_FNZ 0x1
+#define SCI_KBD_MODE_AUTO 0x2
struct toshiba_acpi_dev {
struct acpi_device *acpi_dev;
struct work_struct hotkey_work;
struct backlight_device *backlight_dev;
struct led_classdev led_dev;
+ struct led_classdev kbd_led;
+ struct led_classdev eco_led;
int force_fan;
int last_key_event;
int key_event_valid;
+ int kbd_mode;
+ int kbd_time;
unsigned int illumination_supported:1;
unsigned int video_supported:1;
unsigned int ntfy_supported:1;
unsigned int info_supported:1;
unsigned int tr_backlight_supported:1;
+ unsigned int kbd_illum_supported:1;
+ unsigned int kbd_led_registered:1;
+ unsigned int touchpad_supported:1;
+ unsigned int eco_supported:1;
+ unsigned int accelerometer_supported:1;
+ unsigned int sysfs_created:1;
struct mutex mutex;
};
return status;
}
+/* common sci tasks
+ */
+
+static int sci_open(struct toshiba_acpi_dev *dev)
+{
+ u32 in[HCI_WORDS] = { SCI_OPEN, 0, 0, 0, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status;
+
+ status = hci_raw(dev, in, out);
+ if (ACPI_FAILURE(status) || out[0] == HCI_FAILURE) {
+ pr_err("ACPI call to open SCI failed\n");
+ return 0;
+ }
+
+ if (out[0] == SCI_OPEN_CLOSE_OK) {
+ return 1;
+ } else if (out[0] == SCI_ALREADY_OPEN) {
+ pr_info("Toshiba SCI already opened\n");
+ return 1;
+ } else if (out[0] == SCI_NOT_PRESENT) {
+ pr_info("Toshiba SCI is not present\n");
+ }
+
+ return 0;
+}
+
+static void sci_close(struct toshiba_acpi_dev *dev)
+{
+ u32 in[HCI_WORDS] = { SCI_CLOSE, 0, 0, 0, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status;
+
+ status = hci_raw(dev, in, out);
+ if (ACPI_FAILURE(status) || out[0] == HCI_FAILURE) {
+ pr_err("ACPI call to close SCI failed\n");
+ return;
+ }
+
+ if (out[0] == SCI_OPEN_CLOSE_OK)
+ return;
+ else if (out[0] == SCI_NOT_OPENED)
+ pr_info("Toshiba SCI not opened\n");
+ else if (out[0] == SCI_NOT_PRESENT)
+ pr_info("Toshiba SCI is not present\n");
+}
+
+static acpi_status sci_read(struct toshiba_acpi_dev *dev, u32 reg,
+ u32 *out1, u32 *result)
+{
+ u32 in[HCI_WORDS] = { SCI_GET, reg, 0, 0, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status = hci_raw(dev, in, out);
+ *out1 = out[2];
+ *result = (ACPI_SUCCESS(status)) ? out[0] : HCI_FAILURE;
+ return status;
+}
+
+static acpi_status sci_write(struct toshiba_acpi_dev *dev, u32 reg,
+ u32 in1, u32 *result)
+{
+ u32 in[HCI_WORDS] = { SCI_SET, reg, in1, 0, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status = hci_raw(dev, in, out);
+ *result = (ACPI_SUCCESS(status)) ? out[0] : HCI_FAILURE;
+ return status;
+}
+
/* Illumination support */
static int toshiba_illumination_available(struct toshiba_acpi_dev *dev)
{
- u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
+ u32 in[HCI_WORDS] = { SCI_GET, SCI_ILLUMINATION, 0, 0, 0, 0 };
u32 out[HCI_WORDS];
acpi_status status;
- in[0] = 0xf100;
+ if (!sci_open(dev))
+ return 0;
+
status = hci_raw(dev, in, out);
- if (ACPI_FAILURE(status)) {
+ sci_close(dev);
+ if (ACPI_FAILURE(status) || out[0] == HCI_FAILURE) {
+ pr_err("ACPI call to query Illumination support failed\n");
+ return 0;
+ } else if (out[0] == HCI_NOT_SUPPORTED || out[1] != 1) {
pr_info("Illumination device not available\n");
return 0;
}
- in[0] = 0xf400;
- status = hci_raw(dev, in, out);
+
return 1;
}
{
struct toshiba_acpi_dev *dev = container_of(cdev,
struct toshiba_acpi_dev, led_dev);
- u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
- u32 out[HCI_WORDS];
+ u32 state, result;
acpi_status status;
/* First request : initialize communication. */
- in[0] = 0xf100;
- status = hci_raw(dev, in, out);
+ if (!sci_open(dev))
+ return;
+
+ /* Switch the illumination on/off */
+ state = brightness ? 1 : 0;
+ status = sci_write(dev, SCI_ILLUMINATION, state, &result);
+ sci_close(dev);
if (ACPI_FAILURE(status)) {
- pr_info("Illumination device not available\n");
+ pr_err("ACPI call for illumination failed\n");
+ return;
+ } else if (result == HCI_NOT_SUPPORTED) {
+ pr_info("Illumination not supported\n");
return;
}
+}
- if (brightness) {
- /* Switch the illumination on */
- in[0] = 0xf400;
- in[1] = 0x14e;
- in[2] = 1;
- status = hci_raw(dev, in, out);
- if (ACPI_FAILURE(status)) {
- pr_info("ACPI call for illumination failed\n");
- return;
- }
- } else {
- /* Switch the illumination off */
- in[0] = 0xf400;
- in[1] = 0x14e;
- in[2] = 0;
- status = hci_raw(dev, in, out);
- if (ACPI_FAILURE(status)) {
- pr_info("ACPI call for illumination failed.\n");
- return;
- }
+static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
+{
+ struct toshiba_acpi_dev *dev = container_of(cdev,
+ struct toshiba_acpi_dev, led_dev);
+ u32 state, result;
+ acpi_status status;
+
+ /*Â First request : initialize communication. */
+ if (!sci_open(dev))
+ return LED_OFF;
+
+ /* Check the illumination */
+ status = sci_read(dev, SCI_ILLUMINATION, &state, &result);
+ sci_close(dev);
+ if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call for illumination failed\n");
+ return LED_OFF;
+ } else if (result == HCI_NOT_SUPPORTED) {
+ pr_info("Illumination not supported\n");
+ return LED_OFF;
}
- /* Last request : close communication. */
- in[0] = 0xf200;
- in[1] = 0;
- in[2] = 0;
- hci_raw(dev, in, out);
+ return state ? LED_FULL : LED_OFF;
}
-static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev)
+/* KBD Illumination */
+static int toshiba_kbd_illum_status_set(struct toshiba_acpi_dev *dev, u32 time)
+{
+ u32 result;
+ acpi_status status;
+
+ if (!sci_open(dev))
+ return -EIO;
+
+ status = sci_write(dev, SCI_KBD_ILLUM_STATUS, time, &result);
+ sci_close(dev);
+ if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call to set KBD backlight status failed\n");
+ return -EIO;
+ } else if (result == HCI_NOT_SUPPORTED) {
+ pr_info("Keyboard backlight status not supported\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int toshiba_kbd_illum_status_get(struct toshiba_acpi_dev *dev, u32 *time)
+{
+ u32 result;
+ acpi_status status;
+
+ if (!sci_open(dev))
+ return -EIO;
+
+ status = sci_read(dev, SCI_KBD_ILLUM_STATUS, time, &result);
+ sci_close(dev);
+ if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call to get KBD backlight status failed\n");
+ return -EIO;
+ } else if (result == HCI_NOT_SUPPORTED) {
+ pr_info("Keyboard backlight status not supported\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static enum led_brightness toshiba_kbd_backlight_get(struct led_classdev *cdev)
{
struct toshiba_acpi_dev *dev = container_of(cdev,
- struct toshiba_acpi_dev, led_dev);
- u32 in[HCI_WORDS] = { 0, 0, 0, 0, 0, 0 };
+ struct toshiba_acpi_dev, kbd_led);
+ u32 state, result;
+ acpi_status status;
+
+ /* Check the keyboard backlight state */
+ status = hci_read1(dev, HCI_KBD_ILLUMINATION, &state, &result);
+ if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call to get the keyboard backlight failed\n");
+ return LED_OFF;
+ } else if (result == HCI_NOT_SUPPORTED) {
+ pr_info("Keyboard backlight not supported\n");
+ return LED_OFF;
+ }
+
+ return state ? LED_FULL : LED_OFF;
+}
+
+static void toshiba_kbd_backlight_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct toshiba_acpi_dev *dev = container_of(cdev,
+ struct toshiba_acpi_dev, kbd_led);
+ u32 state, result;
+ acpi_status status;
+
+ /* Set the keyboard backlight state */
+ state = brightness ? 1 : 0;
+ status = hci_write1(dev, HCI_KBD_ILLUMINATION, state, &result);
+ if (ACPI_FAILURE(status) || result == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call to set KBD Illumination mode failed\n");
+ return;
+ } else if (result == HCI_NOT_SUPPORTED) {
+ pr_info("Keyboard backlight not supported\n");
+ return;
+ }
+}
+
+/* TouchPad support */
+static int toshiba_touchpad_set(struct toshiba_acpi_dev *dev, u32 state)
+{
+ u32 result;
+ acpi_status status;
+
+ if (!sci_open(dev))
+ return -EIO;
+
+ status = sci_write(dev, SCI_TOUCHPAD, state, &result);
+ sci_close(dev);
+ if (ACPI_FAILURE(status)) {
+ pr_err("ACPI call to set the touchpad failed\n");
+ return -EIO;
+ } else if (result == HCI_NOT_SUPPORTED) {
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int toshiba_touchpad_get(struct toshiba_acpi_dev *dev, u32 *state)
+{
+ u32 result;
+ acpi_status status;
+
+ if (!sci_open(dev))
+ return -EIO;
+
+ status = sci_read(dev, SCI_TOUCHPAD, state, &result);
+ sci_close(dev);
+ if (ACPI_FAILURE(status)) {
+ pr_err("ACPI call to query the touchpad failed\n");
+ return -EIO;
+ } else if (result == HCI_NOT_SUPPORTED) {
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/* Eco Mode support */
+static int toshiba_eco_mode_available(struct toshiba_acpi_dev *dev)
+{
+ acpi_status status;
+ u32 in[HCI_WORDS] = { HCI_GET, HCI_ECO_MODE, 0, 1, 0, 0 };
+ u32 out[HCI_WORDS];
+
+ status = hci_raw(dev, in, out);
+ if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ pr_info("ACPI call to get ECO led failed\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+static enum led_brightness toshiba_eco_mode_get_status(struct led_classdev *cdev)
+{
+ struct toshiba_acpi_dev *dev = container_of(cdev,
+ struct toshiba_acpi_dev, eco_led);
+ u32 in[HCI_WORDS] = { HCI_GET, HCI_ECO_MODE, 0, 1, 0, 0 };
u32 out[HCI_WORDS];
acpi_status status;
- enum led_brightness result;
- /*Â First request : initialize communication. */
- in[0] = 0xf100;
status = hci_raw(dev, in, out);
- if (ACPI_FAILURE(status)) {
- pr_info("Illumination device not available\n");
+ if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call to get ECO led failed\n");
return LED_OFF;
}
- /* Check the illumination */
- in[0] = 0xf300;
- in[1] = 0x14e;
+ return out[2] ? LED_FULL : LED_OFF;
+}
+
+static void toshiba_eco_mode_set_status(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct toshiba_acpi_dev *dev = container_of(cdev,
+ struct toshiba_acpi_dev, eco_led);
+ u32 in[HCI_WORDS] = { HCI_SET, HCI_ECO_MODE, 0, 1, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status;
+
+ /* Switch the Eco Mode led on/off */
+ in[2] = (brightness) ? 1 : 0;
status = hci_raw(dev, in, out);
- if (ACPI_FAILURE(status)) {
- pr_info("ACPI call for illumination failed.\n");
- return LED_OFF;
+ if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call to set ECO led failed\n");
+ return;
}
+}
- result = out[2] ? LED_FULL : LED_OFF;
+/* Accelerometer support */
+static int toshiba_accelerometer_supported(struct toshiba_acpi_dev *dev)
+{
+ u32 in[HCI_WORDS] = { HCI_GET, HCI_ACCELEROMETER2, 0, 0, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status;
+
+ /* Check if the accelerometer call exists,
+ * this call also serves as initialization
+ */
+ status = hci_raw(dev, in, out);
+ if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call to query the accelerometer failed\n");
+ return -EIO;
+ } else if (out[0] == HCI_DATA_NOT_AVAILABLE ||
+ out[0] == HCI_NOT_INITIALIZED) {
+ pr_err("Accelerometer not initialized\n");
+ return -EIO;
+ } else if (out[0] == HCI_NOT_SUPPORTED) {
+ pr_info("Accelerometer not supported\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev,
+ u32 *xy, u32 *z)
+{
+ u32 in[HCI_WORDS] = { HCI_GET, HCI_ACCELEROMETER, 0, 1, 0, 0 };
+ u32 out[HCI_WORDS];
+ acpi_status status;
+
+ /* Check the Accelerometer status */
+ status = hci_raw(dev, in, out);
+ if (ACPI_FAILURE(status) || out[0] == SCI_INPUT_DATA_ERROR) {
+ pr_err("ACPI call to query the accelerometer failed\n");
+ return -EIO;
+ }
- /* Last request : close communication. */
- in[0] = 0xf200;
- in[1] = 0;
- in[2] = 0;
- hci_raw(dev, in, out);
+ *xy = out[2];
+ *z = out[4];
- return result;
+ return 0;
}
/* Bluetooth rfkill handlers */
.update_status = set_lcd_status,
};
+/*
+ * Sysfs files
+ */
+
+static ssize_t toshiba_kbd_bl_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+ int mode = -1;
+ int time = -1;
+
+ if (sscanf(buf, "%i", &mode) != 1 && (mode != 2 || mode != 1))
+ return -EINVAL;
+
+ /* Set the Keyboard Backlight Mode where:
+ * Mode - Auto (2) | FN-Z (1)
+ * Auto - KBD backlight turns off automatically in given time
+ * FN-Z - KBD backlight "toggles" when hotkey pressed
+ */
+ if (mode != -1 && toshiba->kbd_mode != mode) {
+ time = toshiba->kbd_time << HCI_MISC_SHIFT;
+ time = time + toshiba->kbd_mode;
+ if (toshiba_kbd_illum_status_set(toshiba, time) < 0)
+ return -EIO;
+ toshiba->kbd_mode = mode;
+ }
+
+ return count;
+}
+
+static ssize_t toshiba_kbd_bl_mode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+ u32 time;
+
+ if (toshiba_kbd_illum_status_get(toshiba, &time) < 0)
+ return -EIO;
+
+ return sprintf(buf, "%i\n", time & 0x07);
+}
+
+static ssize_t toshiba_kbd_bl_timeout_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+ int time = -1;
+
+ if (sscanf(buf, "%i", &time) != 1 && (time < 0 || time > 60))
+ return -EINVAL;
+
+ /* Set the Keyboard Backlight Timeout: 0-60 seconds */
+ if (time != -1 && toshiba->kbd_time != time) {
+ time = time << HCI_MISC_SHIFT;
+ time = (toshiba->kbd_mode == SCI_KBD_MODE_AUTO) ?
+ time + 1 : time + 2;
+ if (toshiba_kbd_illum_status_set(toshiba, time) < 0)
+ return -EIO;
+ toshiba->kbd_time = time >> HCI_MISC_SHIFT;
+ }
+
+ return count;
+}
+
+static ssize_t toshiba_kbd_bl_timeout_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+ u32 time;
+
+ if (toshiba_kbd_illum_status_get(toshiba, &time) < 0)
+ return -EIO;
+
+ return sprintf(buf, "%i\n", time >> HCI_MISC_SHIFT);
+}
+
+static ssize_t toshiba_touchpad_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+ int state;
+
+ /* Set the TouchPad on/off, 0 - Disable | 1 - Enable */
+ if (sscanf(buf, "%i", &state) == 1 && (state == 0 || state == 1)) {
+ if (toshiba_touchpad_set(toshiba, state) < 0)
+ return -EIO;
+ }
+
+ return count;
+}
+
+static ssize_t toshiba_touchpad_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+ u32 state;
+ int ret;
+
+ ret = toshiba_touchpad_get(toshiba, &state);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%i\n", state);
+}
+
+static ssize_t toshiba_position_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+ u32 xyval, zval, tmp;
+ u16 x, y, z;
+ int ret;
+
+ xyval = zval = 0;
+ ret = toshiba_accelerometer_get(toshiba, &xyval, &zval);
+ if (ret < 0)
+ return ret;
+
+ x = xyval & HCI_ACCEL_MASK;
+ tmp = xyval >> HCI_MISC_SHIFT;
+ y = tmp & HCI_ACCEL_MASK;
+ z = zval & HCI_ACCEL_MASK;
+
+ return sprintf(buf, "%d %d %d\n", x, y, z);
+}
+
+static DEVICE_ATTR(kbd_backlight_mode, S_IRUGO | S_IWUSR,
+ toshiba_kbd_bl_mode_show, toshiba_kbd_bl_mode_store);
+static DEVICE_ATTR(kbd_backlight_timeout, S_IRUGO | S_IWUSR,
+ toshiba_kbd_bl_timeout_show, toshiba_kbd_bl_timeout_store);
+static DEVICE_ATTR(touchpad, S_IRUGO | S_IWUSR,
+ toshiba_touchpad_show, toshiba_touchpad_store);
+static DEVICE_ATTR(position, S_IRUGO, toshiba_position_show, NULL);
+
+static struct attribute *toshiba_attributes[] = {
+ &dev_attr_kbd_backlight_mode.attr,
+ &dev_attr_kbd_backlight_timeout.attr,
+ &dev_attr_touchpad.attr,
+ &dev_attr_position.attr,
+ NULL,
+};
+
+static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
+ struct attribute *attr, int idx)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct toshiba_acpi_dev *drv = dev_get_drvdata(dev);
+ bool exists = true;
+
+ if (attr == &dev_attr_kbd_backlight_mode.attr)
+ exists = (drv->kbd_illum_supported) ? true : false;
+ else if (attr == &dev_attr_kbd_backlight_timeout.attr)
+ exists = (drv->kbd_mode == SCI_KBD_MODE_AUTO) ? true : false;
+ else if (attr == &dev_attr_touchpad.attr)
+ exists = (drv->touchpad_supported) ? true : false;
+ else if (attr == &dev_attr_position.attr)
+ exists = (drv->accelerometer_supported) ? true : false;
+
+ return exists ? attr->mode : 0;
+}
+
+static struct attribute_group toshiba_attr_group = {
+ .is_visible = toshiba_sysfs_is_visible,
+ .attrs = toshiba_attributes,
+};
+
static bool toshiba_acpi_i8042_filter(unsigned char data, unsigned char str,
struct serio *port)
{
remove_toshiba_proc_entries(dev);
+ if (dev->sysfs_created)
+ sysfs_remove_group(&dev->acpi_dev->dev.kobj,
+ &toshiba_attr_group);
+
if (dev->ntfy_supported) {
i8042_remove_filter(toshiba_acpi_i8042_filter);
cancel_work_sync(&dev->hotkey_work);
if (dev->illumination_supported)
led_classdev_unregister(&dev->led_dev);
+ if (dev->kbd_led_registered)
+ led_classdev_unregister(&dev->kbd_led);
+
+ if (dev->eco_supported)
+ led_classdev_unregister(&dev->eco_led);
+
if (toshiba_acpi)
toshiba_acpi = NULL;
dev->acpi_dev = acpi_dev;
dev->method_hci = hci_method;
acpi_dev->driver_data = dev;
+ dev_set_drvdata(&acpi_dev->dev, dev);
if (toshiba_acpi_setup_keyboard(dev))
pr_info("Unable to activate hotkeys\n");
dev->illumination_supported = 1;
}
+ if (toshiba_eco_mode_available(dev)) {
+ dev->eco_led.name = "toshiba::eco_mode";
+ dev->eco_led.max_brightness = 1;
+ dev->eco_led.brightness_set = toshiba_eco_mode_set_status;
+ dev->eco_led.brightness_get = toshiba_eco_mode_get_status;
+ if (!led_classdev_register(&dev->acpi_dev->dev, &dev->eco_led))
+ dev->eco_supported = 1;
+ }
+
+ ret = toshiba_kbd_illum_status_get(dev, &dummy);
+ if (!ret) {
+ dev->kbd_time = dummy >> HCI_MISC_SHIFT;
+ dev->kbd_mode = dummy & 0x07;
+ }
+ dev->kbd_illum_supported = !ret;
+ /*
+ * Only register the LED if KBD illumination is supported
+ * and the keyboard backlight operation mode is set to FN-Z
+ */
+ if (dev->kbd_illum_supported && dev->kbd_mode == SCI_KBD_MODE_FNZ) {
+ dev->kbd_led.name = "toshiba::kbd_backlight";
+ dev->kbd_led.max_brightness = 1;
+ dev->kbd_led.brightness_set = toshiba_kbd_backlight_set;
+ dev->kbd_led.brightness_get = toshiba_kbd_backlight_get;
+ if (!led_classdev_register(&dev->acpi_dev->dev, &dev->kbd_led))
+ dev->kbd_led_registered = 1;
+ }
+
+ ret = toshiba_touchpad_get(dev, &dummy);
+ dev->touchpad_supported = !ret;
+
+ ret = toshiba_accelerometer_supported(dev);
+ dev->accelerometer_supported = !ret;
+
/* Determine whether or not BIOS supports fan and video interfaces */
ret = get_video_status(dev, &dummy);
ret = get_fan_status(dev, &dummy);
dev->fan_supported = !ret;
+ ret = sysfs_create_group(&dev->acpi_dev->dev.kobj,
+ &toshiba_attr_group);
+ if (ret) {
+ dev->sysfs_created = 0;
+ goto error;
+ }
+ dev->sysfs_created = !ret;
+
create_toshiba_proc_entries(dev);
toshiba_acpi = dev;
on the muxing. This is handled automatically in the driver by
reading the mux info from OTP.
+config REGULATOR_PBIAS
+ tristate "PBIAS OMAP regulator driver"
+ depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
+ help
+ Say y here to support pbias regulator for mmc1:SD card i/o
+ on OMAP SoCs.
+ This driver provides support for OMAP pbias modelled
+ regulators.
+
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
+obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
#define BCM590XX_REG_RANGES(_name, _ranges) \
{ \
.name = #_name, \
+ .n_voltages = 64, \
.n_linear_ranges = ARRAY_SIZE(_ranges), \
.linear_ranges = _ranges, \
}
--- /dev/null
+/*
+ * pbias-regulator.c
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Balaji T K <balajitk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct pbias_reg_info {
+ u32 enable;
+ u32 enable_mask;
+ u32 vmode;
+ unsigned int enable_time;
+ char *name;
+};
+
+struct pbias_regulator_data {
+ struct regulator_desc desc;
+ void __iomem *pbias_addr;
+ unsigned int pbias_reg;
+ struct regulator_dev *dev;
+ struct regmap *syscon;
+ const struct pbias_reg_info *info;
+ int voltage;
+};
+
+static int pbias_regulator_set_voltage(struct regulator_dev *dev,
+ int min_uV, int max_uV, unsigned *selector)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(dev);
+ const struct pbias_reg_info *info = data->info;
+ int ret, vmode;
+
+ if (min_uV <= 1800000)
+ vmode = 0;
+ else if (min_uV > 1800000)
+ vmode = info->vmode;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->vmode, vmode);
+
+ return ret;
+}
+
+static int pbias_regulator_get_voltage(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int value, voltage;
+
+ regmap_read(data->syscon, data->pbias_reg, &value);
+ value &= info->vmode;
+
+ voltage = value ? 3000000 : 1800000;
+
+ return voltage;
+}
+
+static int pbias_regulator_enable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int ret;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->enable_mask, info->enable);
+
+ return ret;
+}
+
+static int pbias_regulator_disable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int ret;
+
+ ret = regmap_update_bits(data->syscon, data->pbias_reg,
+ info->enable_mask, 0);
+ return ret;
+}
+
+static int pbias_regulator_is_enable(struct regulator_dev *rdev)
+{
+ struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+ const struct pbias_reg_info *info = data->info;
+ int value;
+
+ regmap_read(data->syscon, data->pbias_reg, &value);
+
+ return (value & info->enable_mask) == info->enable_mask;
+}
+
+static struct regulator_ops pbias_regulator_voltage_ops = {
+ .set_voltage = pbias_regulator_set_voltage,
+ .get_voltage = pbias_regulator_get_voltage,
+ .enable = pbias_regulator_enable,
+ .disable = pbias_regulator_disable,
+ .is_enabled = pbias_regulator_is_enable,
+};
+
+static const struct pbias_reg_info pbias_mmc_omap2430 = {
+ .enable = BIT(1),
+ .enable_mask = BIT(1),
+ .vmode = BIT(0),
+ .enable_time = 100,
+ .name = "pbias_mmc_omap2430"
+};
+
+static const struct pbias_reg_info pbias_sim_omap3 = {
+ .enable = BIT(9),
+ .enable_mask = BIT(9),
+ .vmode = BIT(8),
+ .enable_time = 100,
+ .name = "pbias_sim_omap3"
+};
+
+static const struct pbias_reg_info pbias_mmc_omap4 = {
+ .enable = BIT(26) | BIT(22),
+ .enable_mask = BIT(26) | BIT(25) | BIT(22),
+ .vmode = BIT(21),
+ .enable_time = 100,
+ .name = "pbias_mmc_omap4"
+};
+
+static const struct pbias_reg_info pbias_mmc_omap5 = {
+ .enable = BIT(27) | BIT(26),
+ .enable_mask = BIT(27) | BIT(25) | BIT(26),
+ .vmode = BIT(21),
+ .enable_time = 100,
+ .name = "pbias_mmc_omap5"
+};
+
+static struct of_regulator_match pbias_matches[] = {
+ { .name = "pbias_mmc_omap2430", .driver_data = (void *)&pbias_mmc_omap2430},
+ { .name = "pbias_sim_omap3", .driver_data = (void *)&pbias_sim_omap3},
+ { .name = "pbias_mmc_omap4", .driver_data = (void *)&pbias_mmc_omap4},
+ { .name = "pbias_mmc_omap5", .driver_data = (void *)&pbias_mmc_omap5},
+};
+#define PBIAS_NUM_REGS ARRAY_SIZE(pbias_matches)
+
+static const struct of_device_id pbias_of_match[] = {
+ { .compatible = "ti,pbias-omap", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pbias_of_match);
+
+static int pbias_regulator_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct pbias_regulator_data *drvdata;
+ struct resource *res;
+ struct regulator_config cfg = { };
+ struct regmap *syscon;
+ const struct pbias_reg_info *info;
+ int ret = 0;
+ int count, idx, data_idx = 0;
+
+ count = of_regulator_match(&pdev->dev, np, pbias_matches,
+ PBIAS_NUM_REGS);
+ if (count < 0)
+ return count;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data)
+ * count, GFP_KERNEL);
+ if (drvdata == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate device data\n");
+ return -ENOMEM;
+ }
+
+ syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(syscon))
+ return PTR_ERR(syscon);
+
+ cfg.dev = &pdev->dev;
+
+ for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) {
+ if (!pbias_matches[idx].init_data ||
+ !pbias_matches[idx].of_node)
+ continue;
+
+ info = pbias_matches[idx].driver_data;
+ if (!info)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ drvdata[data_idx].pbias_reg = res->start;
+ drvdata[data_idx].syscon = syscon;
+ drvdata[data_idx].info = info;
+ drvdata[data_idx].desc.name = info->name;
+ drvdata[data_idx].desc.owner = THIS_MODULE;
+ drvdata[data_idx].desc.type = REGULATOR_VOLTAGE;
+ drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops;
+ drvdata[data_idx].desc.n_voltages = 2;
+ drvdata[data_idx].desc.enable_time = info->enable_time;
+
+ cfg.init_data = pbias_matches[idx].init_data;
+ cfg.driver_data = &drvdata[data_idx];
+ cfg.of_node = pbias_matches[idx].of_node;
+
+ drvdata[data_idx].dev = devm_regulator_register(&pdev->dev,
+ &drvdata[data_idx].desc, &cfg);
+ if (IS_ERR(drvdata[data_idx].dev)) {
+ ret = PTR_ERR(drvdata[data_idx].dev);
+ dev_err(&pdev->dev,
+ "Failed to register regulator: %d\n", ret);
+ goto err_regulator;
+ }
+ data_idx++;
+ }
+
+ platform_set_drvdata(pdev, drvdata);
+
+err_regulator:
+ return ret;
+}
+
+static struct platform_driver pbias_regulator_driver = {
+ .probe = pbias_regulator_probe,
+ .driver = {
+ .name = "pbias-regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(pbias_of_match),
+ },
+};
+
+module_platform_driver(pbias_regulator_driver);
+
+MODULE_AUTHOR("Balaji T K <balajitk@ti.com>");
+MODULE_DESCRIPTION("pbias voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pbias-regulator");
if (!ramp_enable)
goto ramp_disable;
- if (enable_shift) {
- ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
- 1 << enable_shift, 1 << enable_shift);
- if (ret) {
- dev_err(&rdev->dev, "failed to enable ramp rate\n");
- return ret;
- }
+ ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,
+ 1 << enable_shift, 1 << enable_shift);
+ if (ret) {
+ dev_err(&rdev->dev, "failed to enable ramp rate\n");
+ return ret;
}
ramp_val = get_ramp_delay(ramp_delay);
if (!ramp_enable)
goto ramp_disable;
- if (enable_shift) {
- ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
- 1 << enable_shift, 1 << enable_shift);
- if (ret) {
- dev_err(&rdev->dev, "failed to enable ramp rate\n");
- return ret;
- }
+ ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
+ 1 << enable_shift, 1 << enable_shift);
+ if (ret) {
+ dev_err(&rdev->dev, "failed to enable ramp rate\n");
+ return ret;
}
ramp_val = get_ramp_delay(ramp_delay);
config.driver_data = s5m8767;
config.regmap = iodev->regmap_pmic;
config.of_node = pdata->regulators[i].reg_node;
+ config.ena_gpio = config.ena_gpio_flags = 0;
if (pdata->regulators[i].ext_control_gpio)
s5m8767_regulator_config_ext_control(s5m8767,
&pdata->regulators[i], &config);
}
bootreg_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!bootreg_res) {
- dev_err(dev,
- "platform_get_resource(IORESOURCE_MEM, 0): NULL\n");
- return -EADDRNOTAVAIL;
- }
-
- chipsig_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!chipsig_res) {
- dev_err(dev,
- "platform_get_resource(IORESOURCE_MEM, 1): NULL\n");
- return -EADDRNOTAVAIL;
- }
-
bootreg = devm_ioremap_resource(dev, bootreg_res);
if (IS_ERR(bootreg))
return PTR_ERR(bootreg);
+ chipsig_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
chipsig = devm_ioremap_resource(dev, chipsig_res);
if (IS_ERR(chipsig))
return PTR_ERR(chipsig);
*/
disable_irq(drproc->irq);
- devm_clk_put(dev, drproc->dsp_clk);
-
rproc_del(rproc);
rproc_put(rproc);
}
/* STE modem firmware handler operations */
-const struct rproc_fw_ops sproc_fw_ops = {
+static const struct rproc_fw_ops sproc_fw_ops = {
.load = sproc_load_segments,
.find_rsc_table = sproc_find_rsc_table,
.find_loaded_rsc_table = sproc_find_loaded_rsc_table,
sproc_dbg(sproc, "no message was found in vqid %d\n", vqid);
}
-struct ste_modem_dev_cb sproc_dev_cb = {
+static struct ste_modem_dev_cb sproc_dev_cb = {
.kick = sproc_kick_callback,
};
You can override this choice by specifying "scsi_mod.scan=sync"
or async on the kernel's command line.
+ Note that this setting also affects whether resuming from
+ system suspend will be performed asynchronously.
+
menu "SCSI Transports"
depends on SCSI
qlt_xmit_tm_rsp(mcmd);
}
+static void tcm_qla2xxx_aborted_task(struct se_cmd *se_cmd)
+{
+ struct qla_tgt_cmd *cmd = container_of(se_cmd,
+ struct qla_tgt_cmd, se_cmd);
+ struct scsi_qla_host *vha = cmd->vha;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!cmd->sg_mapped)
+ return;
+
+ pci_unmap_sg(ha->pdev, cmd->sg, cmd->sg_cnt, cmd->dma_data_direction);
+ cmd->sg_mapped = 0;
+}
+
/* Local pointer to allocated TCM configfs fabric module */
struct target_fabric_configfs *tcm_qla2xxx_fabric_configfs;
struct target_fabric_configfs *tcm_qla2xxx_npiv_fabric_configfs;
}
se_tpg = &tpg->se_tpg;
- se_sess = transport_init_session();
+ se_sess = transport_init_session(TARGET_PROT_NORMAL);
if (IS_ERR(se_sess)) {
pr_err("Unable to initialize struct se_session\n");
return PTR_ERR(se_sess);
.queue_data_in = tcm_qla2xxx_queue_data_in,
.queue_status = tcm_qla2xxx_queue_status,
.queue_tm_rsp = tcm_qla2xxx_queue_tm_rsp,
+ .aborted_task = tcm_qla2xxx_aborted_task,
/*
* Setup function pointers for generic logic in
* target_core_fabric_configfs.c
.queue_data_in = tcm_qla2xxx_queue_data_in,
.queue_status = tcm_qla2xxx_queue_status,
.queue_tm_rsp = tcm_qla2xxx_queue_tm_rsp,
+ .aborted_task = tcm_qla2xxx_aborted_task,
/*
* Setup function pointers for generic logic in
* target_core_fabric_configfs.c
ASYNC_DOMAIN(scsi_sd_probe_domain);
EXPORT_SYMBOL(scsi_sd_probe_domain);
+/*
+ * Separate domain (from scsi_sd_probe_domain) to maximize the benefit of
+ * asynchronous system resume operations. It is marked 'exclusive' to avoid
+ * being included in the async_synchronize_full() that is invoked by
+ * dpm_resume()
+ */
+ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain);
+EXPORT_SYMBOL(scsi_sd_pm_domain);
+
/* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
* You may not alter any existing entry (although adding new ones is
* encouraged once assigned by ANSI/INCITS T10
*/
int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
int data_direction, void *buffer, unsigned bufflen,
- unsigned char *sense, int timeout, int retries, int flags,
+ unsigned char *sense, int timeout, int retries, u64 flags,
int *resid)
{
struct request *req;
int scsi_execute_req_flags(struct scsi_device *sdev, const unsigned char *cmd,
int data_direction, void *buffer, unsigned bufflen,
struct scsi_sense_hdr *sshdr, int timeout, int retries,
- int *resid, int flags)
+ int *resid, u64 flags)
{
char *sense = NULL;
int result;
#ifdef CONFIG_PM_SLEEP
-static int scsi_dev_type_suspend(struct device *dev, int (*cb)(struct device *))
+static int do_scsi_suspend(struct device *dev, const struct dev_pm_ops *pm)
{
+ return pm && pm->suspend ? pm->suspend(dev) : 0;
+}
+
+static int do_scsi_freeze(struct device *dev, const struct dev_pm_ops *pm)
+{
+ return pm && pm->freeze ? pm->freeze(dev) : 0;
+}
+
+static int do_scsi_poweroff(struct device *dev, const struct dev_pm_ops *pm)
+{
+ return pm && pm->poweroff ? pm->poweroff(dev) : 0;
+}
+
+static int do_scsi_resume(struct device *dev, const struct dev_pm_ops *pm)
+{
+ return pm && pm->resume ? pm->resume(dev) : 0;
+}
+
+static int do_scsi_thaw(struct device *dev, const struct dev_pm_ops *pm)
+{
+ return pm && pm->thaw ? pm->thaw(dev) : 0;
+}
+
+static int do_scsi_restore(struct device *dev, const struct dev_pm_ops *pm)
+{
+ return pm && pm->restore ? pm->restore(dev) : 0;
+}
+
+static int scsi_dev_type_suspend(struct device *dev,
+ int (*cb)(struct device *, const struct dev_pm_ops *))
+{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int err;
+ /* flush pending in-flight resume operations, suspend is synchronous */
+ async_synchronize_full_domain(&scsi_sd_pm_domain);
+
err = scsi_device_quiesce(to_scsi_device(dev));
if (err == 0) {
- if (cb) {
- err = cb(dev);
- if (err)
- scsi_device_resume(to_scsi_device(dev));
- }
+ err = cb(dev, pm);
+ if (err)
+ scsi_device_resume(to_scsi_device(dev));
}
dev_dbg(dev, "scsi suspend: %d\n", err);
return err;
}
-static int scsi_dev_type_resume(struct device *dev, int (*cb)(struct device *))
+static int scsi_dev_type_resume(struct device *dev,
+ int (*cb)(struct device *, const struct dev_pm_ops *))
{
+ const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int err = 0;
- if (cb)
- err = cb(dev);
+ err = cb(dev, pm);
scsi_device_resume(to_scsi_device(dev));
dev_dbg(dev, "scsi resume: %d\n", err);
+
+ if (err == 0) {
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ }
+
return err;
}
static int
-scsi_bus_suspend_common(struct device *dev, int (*cb)(struct device *))
+scsi_bus_suspend_common(struct device *dev,
+ int (*cb)(struct device *, const struct dev_pm_ops *))
{
int err = 0;
return err;
}
-static int
-scsi_bus_resume_common(struct device *dev, int (*cb)(struct device *))
+static void async_sdev_resume(void *dev, async_cookie_t cookie)
{
- int err = 0;
+ scsi_dev_type_resume(dev, do_scsi_resume);
+}
- if (scsi_is_sdev_device(dev))
- err = scsi_dev_type_resume(dev, cb);
+static void async_sdev_thaw(void *dev, async_cookie_t cookie)
+{
+ scsi_dev_type_resume(dev, do_scsi_thaw);
+}
- if (err == 0) {
+static void async_sdev_restore(void *dev, async_cookie_t cookie)
+{
+ scsi_dev_type_resume(dev, do_scsi_restore);
+}
+
+static int scsi_bus_resume_common(struct device *dev,
+ int (*cb)(struct device *, const struct dev_pm_ops *))
+{
+ async_func_t fn;
+
+ if (!scsi_is_sdev_device(dev))
+ fn = NULL;
+ else if (cb == do_scsi_resume)
+ fn = async_sdev_resume;
+ else if (cb == do_scsi_thaw)
+ fn = async_sdev_thaw;
+ else if (cb == do_scsi_restore)
+ fn = async_sdev_restore;
+ else
+ fn = NULL;
+
+ if (fn) {
+ async_schedule_domain(fn, dev, &scsi_sd_pm_domain);
+
+ /*
+ * If a user has disabled async probing a likely reason
+ * is due to a storage enclosure that does not inject
+ * staggered spin-ups. For safety, make resume
+ * synchronous as well in that case.
+ */
+ if (strncmp(scsi_scan_type, "async", 5) != 0)
+ async_synchronize_full_domain(&scsi_sd_pm_domain);
+ } else {
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
}
- return err;
+ return 0;
}
static int scsi_bus_prepare(struct device *dev)
static int scsi_bus_suspend(struct device *dev)
{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- return scsi_bus_suspend_common(dev, pm ? pm->suspend : NULL);
+ return scsi_bus_suspend_common(dev, do_scsi_suspend);
}
static int scsi_bus_resume(struct device *dev)
{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- return scsi_bus_resume_common(dev, pm ? pm->resume : NULL);
+ return scsi_bus_resume_common(dev, do_scsi_resume);
}
static int scsi_bus_freeze(struct device *dev)
{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- return scsi_bus_suspend_common(dev, pm ? pm->freeze : NULL);
+ return scsi_bus_suspend_common(dev, do_scsi_freeze);
}
static int scsi_bus_thaw(struct device *dev)
{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- return scsi_bus_resume_common(dev, pm ? pm->thaw : NULL);
+ return scsi_bus_resume_common(dev, do_scsi_thaw);
}
static int scsi_bus_poweroff(struct device *dev)
{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- return scsi_bus_suspend_common(dev, pm ? pm->poweroff : NULL);
+ return scsi_bus_suspend_common(dev, do_scsi_poweroff);
}
static int scsi_bus_restore(struct device *dev)
{
- const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
- return scsi_bus_resume_common(dev, pm ? pm->restore : NULL);
+ return scsi_bus_resume_common(dev, do_scsi_restore);
}
#else /* CONFIG_PM_SLEEP */
#endif /* CONFIG_PROC_FS */
/* scsi_scan.c */
+extern char scsi_scan_type[];
extern int scsi_complete_async_scans(void);
extern int scsi_scan_host_selected(struct Scsi_Host *, unsigned int,
unsigned int, unsigned int, int);
static inline void scsi_autopm_put_host(struct Scsi_Host *h) {}
#endif /* CONFIG_PM_RUNTIME */
+extern struct async_domain scsi_sd_pm_domain;
extern struct async_domain scsi_sd_probe_domain;
/*
#define SCSI_SCAN_TYPE_DEFAULT "sync"
#endif
-static char scsi_scan_type[6] = SCSI_SCAN_TYPE_DEFAULT;
+char scsi_scan_type[6] = SCSI_SCAN_TYPE_DEFAULT;
module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO);
MODULE_PARM_DESC(scan, "sync, async or none");
devt = disk_devt(sdkp->disk);
scsi_autopm_get_device(sdkp->device);
+ async_synchronize_full_domain(&scsi_sd_pm_domain);
async_synchronize_full_domain(&scsi_sd_probe_domain);
blk_queue_prep_rq(sdkp->device->request_queue, scsi_prep_fn);
blk_queue_unprep_rq(sdkp->device->request_queue, NULL);
config SPI_QUP
tristate "Qualcomm SPI controller with QUP interface"
- depends on ARCH_MSM_DT || (ARM && COMPILE_TEST)
+ depends on ARCH_QCOM || (ARM && COMPILE_TEST)
help
Qualcomm Universal Peripheral (QUP) core is an AHB slave that
provides a common data path (an output FIFO and an input FIFO)
m->actual_length = espi_trans.actual_length;
m->status = espi_trans.status;
- m->complete(m->context);
+ if (m->complete)
+ m->complete(m->context);
}
static int fsl_espi_setup(struct spi_device *spi)
}
m->status = status;
- m->complete(m->context);
+ if (m->complete)
+ m->complete(m->context);
if (status || !cs_change) {
ndelay(nsecs);
}
m->status = status;
- m->complete(m->context);
+ if (m->complete)
+ m->complete(m->context);
if (status || !cs_change)
mpc512x_psc_spi_deactivate_cs(spi);
}
m->status = status;
- m->complete(m->context);
+ if (m->complete)
+ m->complete(m->context);
if (status || !cs_change)
mpc52xx_psc_spi_deactivate_cs(spi);
dev_err(&ms->master->dev, "mode fault\n");
mpc52xx_spi_chipsel(ms, 0);
ms->message->status = -EIO;
- ms->message->complete(ms->message->context);
+ if (ms->message->complete)
+ ms->message->complete(ms->message->context);
ms->state = mpc52xx_spi_fsmstate_idle;
return FSM_CONTINUE;
}
ms->msg_count++;
mpc52xx_spi_chipsel(ms, 0);
ms->message->status = 0;
- ms->message->complete(ms->message->context);
+ if (ms->message->complete)
+ ms->message->complete(ms->message->context);
ms->state = mpc52xx_spi_fsmstate_idle;
return FSM_CONTINUE;
}
INIT_LIST_HEAD(&mcspi->ctx.cs);
- mcspi->dma_channels = kcalloc(master->num_chipselect,
- sizeof(struct omap2_mcspi_dma),
- GFP_KERNEL);
-
- if (mcspi->dma_channels == NULL)
+ mcspi->dma_channels = devm_kcalloc(&pdev->dev, master->num_chipselect,
+ sizeof(struct omap2_mcspi_dma),
+ GFP_KERNEL);
+ if (mcspi->dma_channels == NULL) {
+ status = -ENOMEM;
goto free_master;
+ }
for (i = 0; i < master->num_chipselect; i++) {
char *dma_rx_ch_name = mcspi->dma_channels[i].dma_rx_ch_name;
}
if (status < 0)
- goto dma_chnl_free;
+ goto free_master;
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
disable_pm:
pm_runtime_disable(&pdev->dev);
-dma_chnl_free:
- kfree(mcspi->dma_channels);
free_master:
spi_master_put(master);
return status;
static int omap2_mcspi_remove(struct platform_device *pdev)
{
- struct spi_master *master;
- struct omap2_mcspi *mcspi;
- struct omap2_mcspi_dma *dma_channels;
-
- master = platform_get_drvdata(pdev);
- mcspi = spi_master_get_devdata(master);
- dma_channels = mcspi->dma_channels;
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
pm_runtime_put_sync(mcspi->dev);
pm_runtime_disable(&pdev->dev);
- kfree(dma_channels);
-
return 0;
}
spin_lock_irqsave(&ss->lock, flags);
mesg->status = 0;
- mesg->complete(mesg->context);
+ if (mesg->complete)
+ mesg->complete(mesg->context);
}
clear_fifo(ss);
error:
mesg->status = ret;
- mesg->complete(mesg->context);
+ if (mesg->complete)
+ mesg->complete(mesg->context);
spi_sh_clear_bit(ss, SPI_SH_SSA | SPI_SH_SSDB | SPI_SH_SSD,
SPI_SH_CR1);
exit:
m->status = status;
- m->complete(m->context);
+ if (m->complete)
+ m->complete(m->context);
/* normally deactivate chipselect ... unless no error and
* cs_change has hinted that the next message will probably
struct iovec *scratchiov = conn->ksnc_scheduler->kss_scratch_iov;
unsigned int niov = tx->tx_niov;
#endif
- struct msghdr msg = {
- .msg_name = NULL,
- .msg_namelen = 0,
- .msg_iov = scratchiov,
- .msg_iovlen = niov,
- .msg_control = NULL,
- .msg_controllen = 0,
- .msg_flags = MSG_DONTWAIT
- };
- mm_segment_t oldmm = get_fs();
+ struct msghdr msg = {.msg_flags = MSG_DONTWAIT};
int i;
for (nob = i = 0; i < niov; i++) {
nob < tx->tx_resid)
msg.msg_flags |= MSG_MORE;
- set_fs (KERNEL_DS);
- rc = sock_sendmsg(sock, &msg, nob);
- set_fs (oldmm);
+ rc = kernel_sendmsg(sock, &msg, (struct kvec *)scratchiov, niov, nob);
}
return rc;
}
struct iovec *scratchiov = conn->ksnc_scheduler->kss_scratch_iov;
unsigned int niov = tx->tx_nkiov;
#endif
- struct msghdr msg = {
- .msg_name = NULL,
- .msg_namelen = 0,
- .msg_iov = scratchiov,
- .msg_iovlen = niov,
- .msg_control = NULL,
- .msg_controllen = 0,
- .msg_flags = MSG_DONTWAIT
- };
- mm_segment_t oldmm = get_fs();
+ struct msghdr msg = {.msg_flags = MSG_DONTWAIT};
int i;
for (nob = i = 0; i < niov; i++) {
nob < tx->tx_resid)
msg.msg_flags |= MSG_MORE;
- set_fs (KERNEL_DS);
- rc = sock_sendmsg(sock, &msg, nob);
- set_fs (oldmm);
+ rc = kernel_sendmsg(sock, &msg, (struct kvec *)scratchiov, niov, nob);
for (i = 0; i < niov; i++)
kunmap(kiov[i].kiov_page);
#endif
struct iovec *iov = conn->ksnc_rx_iov;
struct msghdr msg = {
- .msg_name = NULL,
- .msg_namelen = 0,
- .msg_iov = scratchiov,
- .msg_iovlen = niov,
- .msg_control = NULL,
- .msg_controllen = 0,
.msg_flags = 0
};
- mm_segment_t oldmm = get_fs();
int nob;
int i;
int rc;
}
LASSERT (nob <= conn->ksnc_rx_nob_wanted);
- set_fs (KERNEL_DS);
- rc = sock_recvmsg (conn->ksnc_sock, &msg, nob, MSG_DONTWAIT);
- /* NB this is just a boolean..........................^ */
- set_fs (oldmm);
+ rc = kernel_recvmsg(conn->ksnc_sock, &msg,
+ (struct kvec *)scratchiov, niov, nob, MSG_DONTWAIT);
saved_csum = 0;
if (conn->ksnc_proto == &ksocknal_protocol_v2x) {
#endif
lnet_kiov_t *kiov = conn->ksnc_rx_kiov;
struct msghdr msg = {
- .msg_name = NULL,
- .msg_namelen = 0,
- .msg_iov = scratchiov,
- .msg_control = NULL,
- .msg_controllen = 0,
.msg_flags = 0
};
- mm_segment_t oldmm = get_fs();
int nob;
int i;
int rc;
void *addr;
int sum;
int fragnob;
+ int n;
/* NB we can't trust socket ops to either consume our iovs
* or leave them alone. */
addr = ksocknal_lib_kiov_vmap(kiov, niov, scratchiov, pages);
if (addr != NULL) {
nob = scratchiov[0].iov_len;
- msg.msg_iovlen = 1;
+ n = 1;
} else {
for (nob = i = 0; i < niov; i++) {
scratchiov[i].iov_base = kmap(kiov[i].kiov_page) +
kiov[i].kiov_offset;
}
- msg.msg_iovlen = niov;
+ n = niov;
}
LASSERT (nob <= conn->ksnc_rx_nob_wanted);
- set_fs (KERNEL_DS);
- rc = sock_recvmsg (conn->ksnc_sock, &msg, nob, MSG_DONTWAIT);
- /* NB this is just a boolean.......................^ */
- set_fs (oldmm);
+ rc = kernel_recvmsg(conn->ksnc_sock, &msg,
+ (struct kvec *)scratchiov, n, nob, MSG_DONTWAIT);
if (conn->ksnc_msg.ksm_csum != 0) {
for (i = 0, sum = rc; sum > 0; i++, sum -= fragnob) {
* empty enough to take the whole message immediately */
for (;;) {
- struct iovec iov = {
+ struct kvec iov = {
.iov_base = buffer,
.iov_len = nob
};
struct msghdr msg = {
- .msg_name = NULL,
- .msg_namelen = 0,
- .msg_iov = &iov,
- .msg_iovlen = 1,
- .msg_control = NULL,
- .msg_controllen = 0,
.msg_flags = (timeout == 0) ? MSG_DONTWAIT : 0
};
}
}
- set_fs (KERNEL_DS);
then = jiffies;
- rc = sock_sendmsg (sock, &msg, iov.iov_len);
+ rc = kernel_sendmsg(sock, &msg, &iov, 1, nob);
ticks -= jiffies - then;
- set_fs (oldmm);
if (rc == nob)
return 0;
LASSERT (ticks > 0);
for (;;) {
- struct iovec iov = {
+ struct kvec iov = {
.iov_base = buffer,
.iov_len = nob
};
struct msghdr msg = {
- .msg_name = NULL,
- .msg_namelen = 0,
- .msg_iov = &iov,
- .msg_iovlen = 1,
- .msg_control = NULL,
- .msg_controllen = 0,
.msg_flags = 0
};
return rc;
}
- set_fs(KERNEL_DS);
then = jiffies;
- rc = sock_recvmsg(sock, &msg, iov.iov_len, 0);
+ rc = kernel_recvmsg(sock, &msg, &iov, 1, nob, 0);
ticks -= jiffies - then;
- set_fs(oldmm);
if (rc < 0)
return rc;
return rc;
}
-static int ll_readlink(struct dentry *dentry, char *buffer, int buflen)
-{
- struct inode *inode = dentry->d_inode;
- struct ptlrpc_request *request;
- char *symname;
- int rc;
-
- CDEBUG(D_VFSTRACE, "VFS Op\n");
-
- ll_inode_size_lock(inode);
- rc = ll_readlink_internal(inode, &request, &symname);
- if (rc)
- GOTO(out, rc);
-
- rc = vfs_readlink(dentry, buffer, buflen, symname);
- out:
- ptlrpc_req_finished(request);
- ll_inode_size_unlock(inode);
- return rc;
-}
-
static void *ll_follow_link(struct dentry *dentry, struct nameidata *nd)
{
struct inode *inode = dentry->d_inode;
}
struct inode_operations ll_fast_symlink_inode_operations = {
- .readlink = ll_readlink,
+ .readlink = generic_readlink,
.setattr = ll_setattr,
.follow_link = ll_follow_link,
.put_link = ll_put_link,
dev_dbg(&s->spi->dev, "%s: bandwidth selected=%d\n",
__func__, bandwidth_lut[i].freq);
- f_vco = (f_rf + f_if + f_if1) * lo_div;
+ f_vco = (u64) (f_rf + f_if + f_if1) * lo_div;
tmp64 = f_vco;
m = do_div(tmp64, F_REF * R_REF);
n = (unsigned int) tmp64;
/* set tuner, subdev, filters according to sampling rate */
bandwidth_auto = v4l2_ctrl_find(&s->hdl, V4L2_CID_RF_TUNER_BANDWIDTH_AUTO);
- bandwidth = v4l2_ctrl_find(&s->hdl, V4L2_CID_RF_TUNER_BANDWIDTH);
if (v4l2_ctrl_g_ctrl(bandwidth_auto)) {
bandwidth = v4l2_ctrl_find(&s->hdl, V4L2_CID_RF_TUNER_BANDWIDTH);
v4l2_ctrl_s_ctrl(bandwidth, s->f_adc);
static int msi3101_stop_streaming(struct vb2_queue *vq)
{
struct msi3101_state *s = vb2_get_drv_priv(vq);
+ int ret;
dev_dbg(&s->udev->dev, "%s:\n", __func__);
if (mutex_lock_interruptible(&s->v4l2_lock))
/* according to tests, at least 700us delay is required */
msleep(20);
- msi3101_ctrl_msg(s, CMD_STOP_STREAMING, 0);
+ ret = msi3101_ctrl_msg(s, CMD_STOP_STREAMING, 0);
+ if (ret)
+ goto err_sleep_tuner;
/* sleep USB IF / ADC */
- msi3101_ctrl_msg(s, CMD_WREG, 0x01000003);
+ ret = msi3101_ctrl_msg(s, CMD_WREG, 0x01000003);
+ if (ret)
+ goto err_sleep_tuner;
+err_sleep_tuner:
/* sleep tuner */
- v4l2_subdev_call(s->v4l2_subdev, core, s_power, 0);
+ ret = v4l2_subdev_call(s->v4l2_subdev, core, s_power, 0);
mutex_unlock(&s->v4l2_lock);
- return 0;
+ return ret;
}
static struct vb2_ops msi3101_vb2_ops = {
struct stub_device *sdev = dev_get_drvdata(dev);
int sockfd = 0;
struct socket *socket;
- ssize_t err = -EINVAL;
int rv;
if (!sdev) {
return -EINVAL;
if (sockfd != -1) {
+ int err;
dev_info(dev, "stub up\n");
spin_lock_irq(&sdev->ud.lock);
goto err;
}
- socket = sockfd_to_socket(sockfd);
+ socket = sockfd_lookup(sockfd, &err);
if (!socket)
goto err;
err:
spin_unlock_irq(&sdev->ud.lock);
- return err;
+ return -EINVAL;
}
static DEVICE_ATTR(usbip_sockfd, S_IWUSR, NULL, store_sockfd);
* not touch NULL socket.
*/
if (ud->tcp_socket) {
- fput(ud->tcp_socket->file);
+ sockfd_put(ud->tcp_socket);
ud->tcp_socket = NULL;
}
}
EXPORT_SYMBOL_GPL(usbip_recv);
-struct socket *sockfd_to_socket(unsigned int sockfd)
-{
- struct socket *socket;
- struct file *file;
- struct inode *inode;
-
- file = fget(sockfd);
- if (!file) {
- pr_err("invalid sockfd\n");
- return NULL;
- }
-
- inode = file_inode(file);
-
- if (!inode || !S_ISSOCK(inode->i_mode)) {
- fput(file);
- return NULL;
- }
-
- socket = SOCKET_I(inode);
-
- return socket;
-}
-EXPORT_SYMBOL_GPL(sockfd_to_socket);
-
/* there may be more cases to tweak the flags. */
static unsigned int tweak_transfer_flags(unsigned int flags)
{
void usbip_dump_header(struct usbip_header *pdu);
int usbip_recv(struct socket *sock, void *buf, int size);
-struct socket *sockfd_to_socket(unsigned int sockfd);
void usbip_pack_pdu(struct usbip_header *pdu, struct urb *urb, int cmd,
int pack);
/* active connection is closed */
if (vdev->ud.tcp_socket) {
- fput(vdev->ud.tcp_socket->file);
+ sockfd_put(vdev->ud.tcp_socket);
vdev->ud.tcp_socket = NULL;
}
pr_info("release socket\n");
vdev->udev = NULL;
if (ud->tcp_socket) {
- fput(ud->tcp_socket->file);
+ sockfd_put(ud->tcp_socket);
ud->tcp_socket = NULL;
}
ud->status = VDEV_ST_NULL;
struct socket *socket;
int sockfd = 0;
__u32 rhport = 0, devid = 0, speed = 0;
+ int err;
/*
* @rhport: port number of vhci_hcd
return -EINVAL;
/* Extract socket from fd. */
- /* The correct way to clean this up is to fput(socket->file). */
- socket = sockfd_to_socket(sockfd);
+ socket = sockfd_lookup(sockfd, &err);
if (!socket)
return -EINVAL;
spin_unlock(&vdev->ud.lock);
spin_unlock(&the_controller->lock);
- fput(socket->file);
+ sockfd_put(socket);
dev_err(dev, "port %d already used\n", rhport);
return -EINVAL;
return 0;
}
+static void iscsit_aborted_task(struct iscsi_conn *conn, struct iscsi_cmd *cmd)
+{
+ bool scsi_cmd = (cmd->iscsi_opcode == ISCSI_OP_SCSI_CMD);
+
+ spin_lock_bh(&conn->cmd_lock);
+ if (!list_empty(&cmd->i_conn_node))
+ list_del_init(&cmd->i_conn_node);
+ spin_unlock_bh(&conn->cmd_lock);
+
+ __iscsit_free_cmd(cmd, scsi_cmd, true);
+}
+
+static enum target_prot_op iscsit_get_sup_prot_ops(struct iscsi_conn *conn)
+{
+ return TARGET_PROT_NORMAL;
+}
+
static struct iscsit_transport iscsi_target_transport = {
.name = "iSCSI/TCP",
.transport_type = ISCSI_TCP,
.iscsit_response_queue = iscsit_response_queue,
.iscsit_queue_data_in = iscsit_queue_rsp,
.iscsit_queue_status = iscsit_queue_rsp,
+ .iscsit_aborted_task = iscsit_aborted_task,
+ .iscsit_get_sup_prot_ops = iscsit_get_sup_prot_ops,
};
static int __init iscsi_target_init_module(void)
{
u32 payload_length = ntoh24(hdr->dlength);
+ if (!(hdr->flags & ISCSI_FLAG_CMD_FINAL)) {
+ pr_err("NopOUT Flag's, Left Most Bit not set, protocol error.\n");
+ if (!cmd)
+ return iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
+ (unsigned char *)hdr);
+
+ return iscsit_reject_cmd(cmd, ISCSI_REASON_PROTOCOL_ERROR,
+ (unsigned char *)hdr);
+ }
+
if (hdr->itt == RESERVED_ITT && !(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
pr_err("NOPOUT ITT is reserved, but Immediate Bit is"
" not set, protocol error.\n");
{
struct iscsi_cmd *cmd;
struct iscsi_conn *conn_p;
+ bool found = false;
/*
* Only send a Asynchronous Message on connections whos network
list_for_each_entry(conn_p, &conn->sess->sess_conn_list, conn_list) {
if (conn_p->conn_state == TARG_CONN_STATE_LOGGED_IN) {
iscsit_inc_conn_usage_count(conn_p);
+ found = true;
break;
}
}
- if (!conn_p)
+ if (!found)
return;
cmd = iscsit_allocate_cmd(conn_p, TASK_RUNNING);
*/
DEF_TPG_ATTRIB(default_erl);
TPG_ATTR(default_erl, S_IRUGO | S_IWUSR);
+/*
+ * Define iscsi_tpg_attrib_s_t10_pi
+ */
+DEF_TPG_ATTRIB(t10_pi);
+TPG_ATTR(t10_pi, S_IRUGO | S_IWUSR);
static struct configfs_attribute *lio_target_tpg_attrib_attrs[] = {
&iscsi_tpg_attrib_authentication.attr,
&iscsi_tpg_attrib_prod_mode_write_protect.attr,
&iscsi_tpg_attrib_demo_mode_discovery.attr,
&iscsi_tpg_attrib_default_erl.attr,
+ &iscsi_tpg_attrib_t10_pi.attr,
NULL,
};
iscsit_add_cmd_to_response_queue(cmd, cmd->conn, cmd->i_state);
}
+static void lio_aborted_task(struct se_cmd *se_cmd)
+{
+ struct iscsi_cmd *cmd = container_of(se_cmd, struct iscsi_cmd, se_cmd);
+
+ cmd->conn->conn_transport->iscsit_aborted_task(cmd->conn, cmd);
+}
+
static char *lio_tpg_get_endpoint_wwn(struct se_portal_group *se_tpg)
{
struct iscsi_portal_group *tpg = se_tpg->se_tpg_fabric_ptr;
fabric->tf_ops.queue_data_in = &lio_queue_data_in;
fabric->tf_ops.queue_status = &lio_queue_status;
fabric->tf_ops.queue_tm_rsp = &lio_queue_tm_rsp;
+ fabric->tf_ops.aborted_task = &lio_aborted_task;
/*
* Setup function pointers for generic logic in target_core_fabric_configfs.c
*/
#define TA_DEMO_MODE_DISCOVERY 1
#define TA_DEFAULT_ERL 0
#define TA_CACHE_CORE_NPS 0
-
+/* T10 protection information disabled by default */
+#define TA_DEFAULT_T10_PI 0
#define ISCSI_IOV_DATA_BUFFER 5
u32 prod_mode_write_protect;
u32 demo_mode_discovery;
u32 default_erl;
+ u8 t10_pi;
struct iscsi_portal_group *tpg;
};
void *np_context;
struct iscsit_transport *np_transport;
struct list_head np_list;
+ struct iscsi_tpg_np *tpg_np;
} ____cacheline_aligned;
struct iscsi_tpg_np {
{
struct iscsi_session *sess = NULL;
struct iscsi_login_req *pdu = (struct iscsi_login_req *)buf;
+ enum target_prot_op sup_pro_ops;
int ret;
sess = kzalloc(sizeof(struct iscsi_session), GFP_KERNEL);
kfree(sess);
return -ENOMEM;
}
+ sup_pro_ops = conn->conn_transport->iscsit_get_sup_prot_ops(conn);
- sess->se_sess = transport_init_session();
+ sess->se_sess = transport_init_session(sup_pro_ops);
if (IS_ERR(sess->se_sess)) {
iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR,
ISCSI_LOGIN_STATUS_NO_RESOURCES);
a->prod_mode_write_protect = TA_PROD_MODE_WRITE_PROTECT;
a->demo_mode_discovery = TA_DEMO_MODE_DISCOVERY;
a->default_erl = TA_DEFAULT_ERL;
+ a->t10_pi = TA_DEFAULT_T10_PI;
}
int iscsit_tpg_add_portal_group(struct iscsi_tiqn *tiqn, struct iscsi_portal_group *tpg)
init_completion(&tpg_np->tpg_np_comp);
kref_init(&tpg_np->tpg_np_kref);
tpg_np->tpg_np = np;
+ np->tpg_np = tpg_np;
tpg_np->tpg = tpg;
spin_lock(&tpg->tpg_np_lock);
return 0;
}
+
+int iscsit_ta_t10_pi(
+ struct iscsi_portal_group *tpg,
+ u32 flag)
+{
+ struct iscsi_tpg_attrib *a = &tpg->tpg_attrib;
+
+ if ((flag != 0) && (flag != 1)) {
+ pr_err("Illegal value %d\n", flag);
+ return -EINVAL;
+ }
+
+ a->t10_pi = flag;
+ pr_debug("iSCSI_TPG[%hu] - T10 Protection information bit:"
+ " %s\n", tpg->tpgt, (a->t10_pi) ?
+ "ON" : "OFF");
+
+ return 0;
+}
extern int iscsit_ta_prod_mode_write_protect(struct iscsi_portal_group *, u32);
extern int iscsit_ta_demo_mode_discovery(struct iscsi_portal_group *, u32);
extern int iscsit_ta_default_erl(struct iscsi_portal_group *, u32);
+extern int iscsit_ta_t10_pi(struct iscsi_portal_group *, u32);
#endif /* ISCSI_TARGET_TPG_H */
}
EXPORT_SYMBOL(iscsit_release_cmd);
-static void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool scsi_cmd,
- bool check_queues)
+void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool scsi_cmd,
+ bool check_queues)
{
struct iscsi_conn *conn = cmd->conn;
extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *);
extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *);
extern void iscsit_release_cmd(struct iscsi_cmd *);
+extern void __iscsit_free_cmd(struct iscsi_cmd *, bool, bool);
extern void iscsit_free_cmd(struct iscsi_cmd *, bool);
extern int iscsit_check_session_usage_count(struct iscsi_session *);
extern void iscsit_dec_session_usage_count(struct iscsi_session *);
se_cmd->se_cmd_flags |= SCF_BIDI;
}
+
+ if (!scsi_prot_sg_count(sc) && scsi_get_prot_op(sc) != SCSI_PROT_NORMAL)
+ se_cmd->prot_pto = true;
+
rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
scsi_bufflen(sc), tcm_loop_sam_attr(sc),
wake_up(&tl_tmr->tl_tmr_wait);
}
+static void tcm_loop_aborted_task(struct se_cmd *se_cmd)
+{
+ return;
+}
+
static char *tcm_loop_dump_proto_id(struct tcm_loop_hba *tl_hba)
{
switch (tl_hba->tl_proto_id) {
/*
* Initialize the struct se_session pointer
*/
- tl_nexus->se_sess = transport_init_session();
+ tl_nexus->se_sess = transport_init_session(TARGET_PROT_ALL);
if (IS_ERR(tl_nexus->se_sess)) {
ret = PTR_ERR(tl_nexus->se_sess);
goto out;
fabric->tf_ops.queue_data_in = &tcm_loop_queue_data_in;
fabric->tf_ops.queue_status = &tcm_loop_queue_status;
fabric->tf_ops.queue_tm_rsp = &tcm_loop_queue_tm_rsp;
+ fabric->tf_ops.aborted_task = &tcm_loop_aborted_task;
/*
* Setup function pointers for generic logic in target_core_fabric_configfs.c
return ERR_PTR(-ENOMEM);
}
- sess->se_sess = transport_init_session();
+ sess->se_sess = transport_init_session(TARGET_PROT_NORMAL);
if (IS_ERR(sess->se_sess)) {
pr_err("failed to init se_session\n");
{
}
+static void sbp_aborted_task(struct se_cmd *se_cmd)
+{
+ return;
+}
+
static int sbp_check_stop_free(struct se_cmd *se_cmd)
{
struct sbp_target_request *req = container_of(se_cmd,
.queue_data_in = sbp_queue_data_in,
.queue_status = sbp_queue_status,
.queue_tm_rsp = sbp_queue_tm_rsp,
+ .aborted_task = sbp_aborted_task,
.check_stop_free = sbp_check_stop_free,
.fabric_make_wwn = sbp_make_tport,
return rc;
}
-static inline int core_alua_state_nonoptimized(
+static inline void set_ascq(struct se_cmd *cmd, u8 alua_ascq)
+{
+ /*
+ * Set SCSI additional sense code (ASC) to 'LUN Not Accessible';
+ * The ALUA additional sense code qualifier (ASCQ) is determined
+ * by the ALUA primary or secondary access state..
+ */
+ pr_debug("[%s]: ALUA TG Port not available, "
+ "SenseKey: NOT_READY, ASC/ASCQ: "
+ "0x04/0x%02x\n",
+ cmd->se_tfo->get_fabric_name(), alua_ascq);
+
+ cmd->scsi_asc = 0x04;
+ cmd->scsi_ascq = alua_ascq;
+}
+
+static inline void core_alua_state_nonoptimized(
struct se_cmd *cmd,
unsigned char *cdb,
- int nonop_delay_msecs,
- u8 *alua_ascq)
+ int nonop_delay_msecs)
{
/*
* Set SCF_ALUA_NON_OPTIMIZED here, this value will be checked
*/
cmd->se_cmd_flags |= SCF_ALUA_NON_OPTIMIZED;
cmd->alua_nonop_delay = nonop_delay_msecs;
- return 0;
}
static inline int core_alua_state_lba_dependent(
struct se_cmd *cmd,
- struct t10_alua_tg_pt_gp *tg_pt_gp,
- u8 *alua_ascq)
+ struct t10_alua_tg_pt_gp *tg_pt_gp)
{
struct se_device *dev = cmd->se_dev;
u64 segment_size, segment_mult, sectors, lba;
}
if (!cur_map) {
spin_unlock(&dev->t10_alua.lba_map_lock);
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_UNAVAILABLE;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_UNAVAILABLE);
return 1;
}
list_for_each_entry(map_mem, &cur_map->lba_map_mem_list,
switch(map_mem->lba_map_mem_alua_state) {
case ALUA_ACCESS_STATE_STANDBY:
spin_unlock(&dev->t10_alua.lba_map_lock);
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_STANDBY;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_STANDBY);
return 1;
case ALUA_ACCESS_STATE_UNAVAILABLE:
spin_unlock(&dev->t10_alua.lba_map_lock);
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_UNAVAILABLE;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_UNAVAILABLE);
return 1;
default:
break;
static inline int core_alua_state_standby(
struct se_cmd *cmd,
- unsigned char *cdb,
- u8 *alua_ascq)
+ unsigned char *cdb)
{
/*
* Allowed CDBs for ALUA_ACCESS_STATE_STANDBY as defined by
case MI_REPORT_TARGET_PGS:
return 0;
default:
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_STANDBY;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_STANDBY);
return 1;
}
case MAINTENANCE_OUT:
case MO_SET_TARGET_PGS:
return 0;
default:
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_STANDBY;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_STANDBY);
return 1;
}
case REQUEST_SENSE:
case WRITE_BUFFER:
return 0;
default:
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_STANDBY;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_STANDBY);
return 1;
}
static inline int core_alua_state_unavailable(
struct se_cmd *cmd,
- unsigned char *cdb,
- u8 *alua_ascq)
+ unsigned char *cdb)
{
/*
* Allowed CDBs for ALUA_ACCESS_STATE_UNAVAILABLE as defined by
case MI_REPORT_TARGET_PGS:
return 0;
default:
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_UNAVAILABLE;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_UNAVAILABLE);
return 1;
}
case MAINTENANCE_OUT:
case MO_SET_TARGET_PGS:
return 0;
default:
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_UNAVAILABLE;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_UNAVAILABLE);
return 1;
}
case REQUEST_SENSE:
case WRITE_BUFFER:
return 0;
default:
- *alua_ascq = ASCQ_04H_ALUA_TG_PT_UNAVAILABLE;
+ set_ascq(cmd, ASCQ_04H_ALUA_TG_PT_UNAVAILABLE);
return 1;
}
static inline int core_alua_state_transition(
struct se_cmd *cmd,
- unsigned char *cdb,
- u8 *alua_ascq)
+ unsigned char *cdb)
{
/*
* Allowed CDBs for ALUA_ACCESS_STATE_TRANSITION as defined by
case MI_REPORT_TARGET_PGS:
return 0;
default:
- *alua_ascq = ASCQ_04H_ALUA_STATE_TRANSITION;
+ set_ascq(cmd, ASCQ_04H_ALUA_STATE_TRANSITION);
return 1;
}
case REQUEST_SENSE:
case WRITE_BUFFER:
return 0;
default:
- *alua_ascq = ASCQ_04H_ALUA_STATE_TRANSITION;
+ set_ascq(cmd, ASCQ_04H_ALUA_STATE_TRANSITION);
return 1;
}
struct t10_alua_tg_pt_gp *tg_pt_gp;
struct t10_alua_tg_pt_gp_member *tg_pt_gp_mem;
int out_alua_state, nonop_delay_msecs;
- u8 alua_ascq;
- int ret;
if (dev->se_hba->hba_flags & HBA_FLAGS_INTERNAL_USE)
return 0;
if (atomic_read(&port->sep_tg_pt_secondary_offline)) {
pr_debug("ALUA: Got secondary offline status for local"
" target port\n");
- alua_ascq = ASCQ_04H_ALUA_OFFLINE;
- ret = 1;
- goto out;
+ set_ascq(cmd, ASCQ_04H_ALUA_OFFLINE);
+ return TCM_CHECK_CONDITION_NOT_READY;
}
/*
* Second, obtain the struct t10_alua_tg_pt_gp_member pointer to the
switch (out_alua_state) {
case ALUA_ACCESS_STATE_ACTIVE_NON_OPTIMIZED:
- ret = core_alua_state_nonoptimized(cmd, cdb,
- nonop_delay_msecs, &alua_ascq);
+ core_alua_state_nonoptimized(cmd, cdb, nonop_delay_msecs);
break;
case ALUA_ACCESS_STATE_STANDBY:
- ret = core_alua_state_standby(cmd, cdb, &alua_ascq);
+ if (core_alua_state_standby(cmd, cdb))
+ return TCM_CHECK_CONDITION_NOT_READY;
break;
case ALUA_ACCESS_STATE_UNAVAILABLE:
- ret = core_alua_state_unavailable(cmd, cdb, &alua_ascq);
+ if (core_alua_state_unavailable(cmd, cdb))
+ return TCM_CHECK_CONDITION_NOT_READY;
break;
case ALUA_ACCESS_STATE_TRANSITION:
- ret = core_alua_state_transition(cmd, cdb, &alua_ascq);
+ if (core_alua_state_transition(cmd, cdb))
+ return TCM_CHECK_CONDITION_NOT_READY;
break;
case ALUA_ACCESS_STATE_LBA_DEPENDENT:
- ret = core_alua_state_lba_dependent(cmd, tg_pt_gp, &alua_ascq);
+ if (core_alua_state_lba_dependent(cmd, tg_pt_gp))
+ return TCM_CHECK_CONDITION_NOT_READY;
break;
/*
* OFFLINE is a secondary ALUA target port group access state, that is
return TCM_INVALID_CDB_FIELD;
}
-out:
- if (ret > 0) {
- /*
- * Set SCSI additional sense code (ASC) to 'LUN Not Accessible';
- * The ALUA additional sense code qualifier (ASCQ) is determined
- * by the ALUA primary or secondary access state..
- */
- pr_debug("[%s]: ALUA TG Port not available, "
- "SenseKey: NOT_READY, ASC/ASCQ: "
- "0x04/0x%02x\n",
- cmd->se_tfo->get_fabric_name(), alua_ascq);
-
- cmd->scsi_asc = 0x04;
- cmd->scsi_ascq = alua_ascq;
- return TCM_CHECK_CONDITION_NOT_READY;
- }
-
return 0;
}
pr_err("Missing tfo->queue_tm_rsp()\n");
return -EINVAL;
}
+ if (!tfo->aborted_task) {
+ pr_err("Missing tfo->aborted_task()\n");
+ return -EINVAL;
+ }
/*
* We at least require tfo->fabric_make_wwn(), tfo->fabric_drop_wwn()
* tfo->fabric_make_tpg() and tfo->fabric_drop_tpg() in
return 0;
}
-static void fd_init_format_buf(struct se_device *dev, unsigned char *buf,
- u32 unit_size, u32 *ref_tag, u16 app_tag,
- bool inc_reftag)
-{
- unsigned char *p = buf;
- int i;
-
- for (i = 0; i < unit_size; i += dev->prot_length) {
- *((u16 *)&p[0]) = 0xffff;
- *((__be16 *)&p[2]) = cpu_to_be16(app_tag);
- *((__be32 *)&p[4]) = cpu_to_be32(*ref_tag);
-
- if (inc_reftag)
- (*ref_tag)++;
-
- p += dev->prot_length;
- }
-}
-
static int fd_format_prot(struct se_device *dev)
{
struct fd_dev *fd_dev = FD_DEV(dev);
sector_t prot_length, prot;
unsigned char *buf;
loff_t pos = 0;
- u32 ref_tag = 0;
int unit_size = FDBD_FORMAT_UNIT_SIZE * dev->dev_attrib.block_size;
int rc, ret = 0, size, len;
- bool inc_reftag = false;
if (!dev->dev_attrib.pi_prot_type) {
pr_err("Unable to format_prot while pi_prot_type == 0\n");
return -ENODEV;
}
- switch (dev->dev_attrib.pi_prot_type) {
- case TARGET_DIF_TYPE3_PROT:
- ref_tag = 0xffffffff;
- break;
- case TARGET_DIF_TYPE2_PROT:
- case TARGET_DIF_TYPE1_PROT:
- inc_reftag = true;
- break;
- default:
- break;
- }
-
buf = vzalloc(unit_size);
if (!buf) {
pr_err("Unable to allocate FILEIO prot buf\n");
return -ENOMEM;
}
-
prot_length = (dev->transport->get_blocks(dev) + 1) * dev->prot_length;
size = prot_length;
pr_debug("Using FILEIO prot_length: %llu\n",
(unsigned long long)prot_length);
+ memset(buf, 0xff, unit_size);
for (prot = 0; prot < prot_length; prot += unit_size) {
-
- fd_init_format_buf(dev, buf, unit_size, &ref_tag, 0xffff,
- inc_reftag);
-
len = min(unit_size, size);
-
rc = kernel_write(prot_fd, buf, len, pos);
if (rc != len) {
pr_err("vfs_write to prot file failed: %d\n", rc);
if (ib_dev->ibd_bd != NULL)
blkdev_put(ib_dev->ibd_bd, FMODE_WRITE|FMODE_READ|FMODE_EXCL);
- if (ib_dev->ibd_bio_set != NULL) {
- bioset_integrity_free(ib_dev->ibd_bio_set);
+ if (ib_dev->ibd_bio_set != NULL)
bioset_free(ib_dev->ibd_bio_set);
- }
+
kfree(ib_dev);
}
rd_dev->sg_prot_count = 0;
}
-static int rd_build_prot_space(struct rd_dev *rd_dev, int prot_length)
+static int rd_build_prot_space(struct rd_dev *rd_dev, int prot_length, int block_size)
{
struct rd_dev_sg_table *sg_table;
u32 total_sg_needed, sg_tables;
if (rd_dev->rd_flags & RDF_NULLIO)
return 0;
-
- total_sg_needed = rd_dev->rd_page_count / prot_length;
+ /*
+ * prot_length=8byte dif data
+ * tot sg needed = rd_page_count * (PGSZ/block_size) *
+ * (prot_length/block_size) + pad
+ * PGSZ canceled each other.
+ */
+ total_sg_needed = (rd_dev->rd_page_count * prot_length / block_size) + 1;
sg_tables = (total_sg_needed / max_sg_per_table) + 1;
if (!dev->dev_attrib.pi_prot_type)
return 0;
- return rd_build_prot_space(rd_dev, dev->prot_length);
+ return rd_build_prot_space(rd_dev, dev->prot_length,
+ dev->dev_attrib.block_size);
}
static void rd_free_prot(struct se_device *dev)
sbc_emulate_readcapacity_16(struct se_cmd *cmd)
{
struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
unsigned char *rbuf;
unsigned char buf[32];
unsigned long long blocks = dev->transport->get_blocks(dev);
/*
* Set P_TYPE and PROT_EN bits for DIF support
*/
- if (dev->dev_attrib.pi_prot_type)
- buf[12] = (dev->dev_attrib.pi_prot_type - 1) << 1 | 0x1;
+ if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) {
+ if (dev->dev_attrib.pi_prot_type)
+ buf[12] = (dev->dev_attrib.pi_prot_type - 1) << 1 | 0x1;
+ }
if (dev->transport->get_lbppbe)
buf[13] = dev->transport->get_lbppbe(dev) & 0x0f;
goto out;
}
- write_sg = kzalloc(sizeof(struct scatterlist) * cmd->t_data_nents,
+ write_sg = kmalloc(sizeof(struct scatterlist) * cmd->t_data_nents,
GFP_KERNEL);
if (!write_sg) {
pr_err("Unable to allocate compare_and_write sg\n");
ret = TCM_OUT_OF_RESOURCES;
goto out;
}
+ sg_init_table(write_sg, cmd->t_data_nents);
/*
* Setup verify and write data payloads from total NumberLBAs.
*/
return TCM_NO_SENSE;
}
+static int
+sbc_set_prot_op_checks(u8 protect, enum target_prot_type prot_type,
+ bool is_write, struct se_cmd *cmd)
+{
+ if (is_write) {
+ cmd->prot_op = protect ? TARGET_PROT_DOUT_PASS :
+ TARGET_PROT_DOUT_INSERT;
+ switch (protect) {
+ case 0x0:
+ case 0x3:
+ cmd->prot_checks = 0;
+ break;
+ case 0x1:
+ case 0x5:
+ cmd->prot_checks = TARGET_DIF_CHECK_GUARD;
+ if (prot_type == TARGET_DIF_TYPE1_PROT)
+ cmd->prot_checks |= TARGET_DIF_CHECK_REFTAG;
+ break;
+ case 0x2:
+ if (prot_type == TARGET_DIF_TYPE1_PROT)
+ cmd->prot_checks = TARGET_DIF_CHECK_REFTAG;
+ break;
+ case 0x4:
+ cmd->prot_checks = TARGET_DIF_CHECK_GUARD;
+ break;
+ default:
+ pr_err("Unsupported protect field %d\n", protect);
+ return -EINVAL;
+ }
+ } else {
+ cmd->prot_op = protect ? TARGET_PROT_DIN_PASS :
+ TARGET_PROT_DIN_STRIP;
+ switch (protect) {
+ case 0x0:
+ case 0x1:
+ case 0x5:
+ cmd->prot_checks = TARGET_DIF_CHECK_GUARD;
+ if (prot_type == TARGET_DIF_TYPE1_PROT)
+ cmd->prot_checks |= TARGET_DIF_CHECK_REFTAG;
+ break;
+ case 0x2:
+ if (prot_type == TARGET_DIF_TYPE1_PROT)
+ cmd->prot_checks = TARGET_DIF_CHECK_REFTAG;
+ break;
+ case 0x3:
+ cmd->prot_checks = 0;
+ break;
+ case 0x4:
+ cmd->prot_checks = TARGET_DIF_CHECK_GUARD;
+ break;
+ default:
+ pr_err("Unsupported protect field %d\n", protect);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static bool
sbc_check_prot(struct se_device *dev, struct se_cmd *cmd, unsigned char *cdb,
- u32 sectors)
+ u32 sectors, bool is_write)
{
- if (!cmd->t_prot_sg || !cmd->t_prot_nents)
+ u8 protect = cdb[1] >> 5;
+
+ if ((!cmd->t_prot_sg || !cmd->t_prot_nents) && cmd->prot_pto)
return true;
switch (dev->dev_attrib.pi_prot_type) {
case TARGET_DIF_TYPE3_PROT:
- if (!(cdb[1] & 0xe0))
- return true;
-
cmd->reftag_seed = 0xffffffff;
break;
case TARGET_DIF_TYPE2_PROT:
- if (cdb[1] & 0xe0)
+ if (protect)
return false;
cmd->reftag_seed = cmd->t_task_lba;
break;
case TARGET_DIF_TYPE1_PROT:
- if (!(cdb[1] & 0xe0))
- return true;
-
cmd->reftag_seed = cmd->t_task_lba;
break;
case TARGET_DIF_TYPE0_PROT:
return true;
}
+ if (sbc_set_prot_op_checks(protect, dev->dev_attrib.pi_prot_type,
+ is_write, cmd))
+ return false;
+
cmd->prot_type = dev->dev_attrib.pi_prot_type;
cmd->prot_length = dev->prot_length * sectors;
- cmd->prot_handover = PROT_SEPERATED;
+ pr_debug("%s: prot_type=%d, prot_length=%d prot_op=%d prot_checks=%d\n",
+ __func__, cmd->prot_type, cmd->prot_length,
+ cmd->prot_op, cmd->prot_checks);
return true;
}
sectors = transport_get_sectors_10(cdb);
cmd->t_task_lba = transport_lba_32(cdb);
- if (!sbc_check_prot(dev, cmd, cdb, sectors))
+ if (!sbc_check_prot(dev, cmd, cdb, sectors, false))
return TCM_UNSUPPORTED_SCSI_OPCODE;
cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
sectors = transport_get_sectors_12(cdb);
cmd->t_task_lba = transport_lba_32(cdb);
- if (!sbc_check_prot(dev, cmd, cdb, sectors))
+ if (!sbc_check_prot(dev, cmd, cdb, sectors, false))
return TCM_UNSUPPORTED_SCSI_OPCODE;
cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
sectors = transport_get_sectors_16(cdb);
cmd->t_task_lba = transport_lba_64(cdb);
- if (!sbc_check_prot(dev, cmd, cdb, sectors))
+ if (!sbc_check_prot(dev, cmd, cdb, sectors, false))
return TCM_UNSUPPORTED_SCSI_OPCODE;
cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
sectors = transport_get_sectors_10(cdb);
cmd->t_task_lba = transport_lba_32(cdb);
- if (!sbc_check_prot(dev, cmd, cdb, sectors))
+ if (!sbc_check_prot(dev, cmd, cdb, sectors, true))
return TCM_UNSUPPORTED_SCSI_OPCODE;
if (cdb[1] & 0x8)
sectors = transport_get_sectors_12(cdb);
cmd->t_task_lba = transport_lba_32(cdb);
- if (!sbc_check_prot(dev, cmd, cdb, sectors))
+ if (!sbc_check_prot(dev, cmd, cdb, sectors, true))
return TCM_UNSUPPORTED_SCSI_OPCODE;
if (cdb[1] & 0x8)
sectors = transport_get_sectors_16(cdb);
cmd->t_task_lba = transport_lba_64(cdb);
- if (!sbc_check_prot(dev, cmd, cdb, sectors))
+ if (!sbc_check_prot(dev, cmd, cdb, sectors, true))
return TCM_UNSUPPORTED_SCSI_OPCODE;
if (cdb[1] & 0x8)
}
EXPORT_SYMBOL(sbc_execute_unmap);
+void
+sbc_dif_generate(struct se_cmd *cmd)
+{
+ struct se_device *dev = cmd->se_dev;
+ struct se_dif_v1_tuple *sdt;
+ struct scatterlist *dsg, *psg = cmd->t_prot_sg;
+ sector_t sector = cmd->t_task_lba;
+ void *daddr, *paddr;
+ int i, j, offset = 0;
+
+ for_each_sg(cmd->t_data_sg, dsg, cmd->t_data_nents, i) {
+ daddr = kmap_atomic(sg_page(dsg)) + dsg->offset;
+ paddr = kmap_atomic(sg_page(psg)) + psg->offset;
+
+ for (j = 0; j < dsg->length; j += dev->dev_attrib.block_size) {
+
+ if (offset >= psg->length) {
+ kunmap_atomic(paddr);
+ psg = sg_next(psg);
+ paddr = kmap_atomic(sg_page(psg)) + psg->offset;
+ offset = 0;
+ }
+
+ sdt = paddr + offset;
+ sdt->guard_tag = cpu_to_be16(crc_t10dif(daddr + j,
+ dev->dev_attrib.block_size));
+ if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE1_PROT)
+ sdt->ref_tag = cpu_to_be32(sector & 0xffffffff);
+ sdt->app_tag = 0;
+
+ pr_debug("DIF WRITE INSERT sector: %llu guard_tag: 0x%04x"
+ " app_tag: 0x%04x ref_tag: %u\n",
+ (unsigned long long)sector, sdt->guard_tag,
+ sdt->app_tag, be32_to_cpu(sdt->ref_tag));
+
+ sector++;
+ offset += sizeof(struct se_dif_v1_tuple);
+ }
+
+ kunmap_atomic(paddr);
+ kunmap_atomic(daddr);
+ }
+}
+
static sense_reason_t
sbc_dif_v1_verify(struct se_device *dev, struct se_dif_v1_tuple *sdt,
const void *p, sector_t sector, unsigned int ei_lba)
}
EXPORT_SYMBOL(sbc_dif_verify_write);
-sense_reason_t
-sbc_dif_verify_read(struct se_cmd *cmd, sector_t start, unsigned int sectors,
- unsigned int ei_lba, struct scatterlist *sg, int sg_off)
+static sense_reason_t
+__sbc_dif_verify_read(struct se_cmd *cmd, sector_t start, unsigned int sectors,
+ unsigned int ei_lba, struct scatterlist *sg, int sg_off)
{
struct se_device *dev = cmd->se_dev;
struct se_dif_v1_tuple *sdt;
kunmap_atomic(paddr);
kunmap_atomic(daddr);
}
- sbc_dif_copy_prot(cmd, sectors, true, sg, sg_off);
return 0;
}
+
+sense_reason_t
+sbc_dif_read_strip(struct se_cmd *cmd)
+{
+ struct se_device *dev = cmd->se_dev;
+ u32 sectors = cmd->prot_length / dev->prot_length;
+
+ return __sbc_dif_verify_read(cmd, cmd->t_task_lba, sectors, 0,
+ cmd->t_prot_sg, 0);
+}
+
+sense_reason_t
+sbc_dif_verify_read(struct se_cmd *cmd, sector_t start, unsigned int sectors,
+ unsigned int ei_lba, struct scatterlist *sg, int sg_off)
+{
+ sense_reason_t rc;
+
+ rc = __sbc_dif_verify_read(cmd, start, sectors, ei_lba, sg, sg_off);
+ if (rc)
+ return rc;
+
+ sbc_dif_copy_prot(cmd, sectors, true, sg, sg_off);
+ return 0;
+}
EXPORT_SYMBOL(sbc_dif_verify_read);
{
struct se_lun *lun = cmd->se_lun;
struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
/* Set RMB (removable media) for tape devices */
if (dev->transport->get_device_type(dev) == TYPE_TAPE)
if (dev->dev_attrib.emulate_3pc)
buf[5] |= 0x8;
/*
- * Set Protection (PROTECT) bit when DIF has been enabled.
+ * Set Protection (PROTECT) bit when DIF has been enabled on the
+ * device, and the transport supports VERIFY + PASS.
*/
- if (dev->dev_attrib.pi_prot_type)
- buf[5] |= 0x1;
+ if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) {
+ if (dev->dev_attrib.pi_prot_type)
+ buf[5] |= 0x1;
+ }
buf[7] = 0x2; /* CmdQue=1 */
spc_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf)
{
struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
buf[3] = 0x3c;
/*
* Set GRD_CHK + REF_CHK for TYPE1 protection, or GRD_CHK
* only for TYPE3 protection.
*/
- if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE1_PROT)
- buf[4] = 0x5;
- else if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE3_PROT)
- buf[4] = 0x4;
+ if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) {
+ if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE1_PROT)
+ buf[4] = 0x5;
+ else if (dev->dev_attrib.pi_prot_type == TARGET_DIF_TYPE3_PROT)
+ buf[4] = 0x4;
+ }
/* Set HEADSUP, ORDSUP, SIMPSUP */
buf[5] = 0x07;
return ret;
}
-static int spc_modesense_rwrecovery(struct se_device *dev, u8 pc, u8 *p)
+static int spc_modesense_rwrecovery(struct se_cmd *cmd, u8 pc, u8 *p)
{
p[0] = 0x01;
p[1] = 0x0a;
return 12;
}
-static int spc_modesense_control(struct se_device *dev, u8 pc, u8 *p)
+static int spc_modesense_control(struct se_cmd *cmd, u8 pc, u8 *p)
{
+ struct se_device *dev = cmd->se_dev;
+ struct se_session *sess = cmd->se_sess;
+
p[0] = 0x0a;
p[1] = 0x0a;
* type, shall not modify the contents of the LOGICAL BLOCK REFERENCE
* TAG field.
*/
- if (dev->dev_attrib.pi_prot_type)
- p[5] |= 0x80;
+ if (sess->sup_prot_ops & (TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS)) {
+ if (dev->dev_attrib.pi_prot_type)
+ p[5] |= 0x80;
+ }
p[8] = 0xff;
p[9] = 0xff;
return 12;
}
-static int spc_modesense_caching(struct se_device *dev, u8 pc, u8 *p)
+static int spc_modesense_caching(struct se_cmd *cmd, u8 pc, u8 *p)
{
+ struct se_device *dev = cmd->se_dev;
+
p[0] = 0x08;
p[1] = 0x12;
return 20;
}
-static int spc_modesense_informational_exceptions(struct se_device *dev, u8 pc, unsigned char *p)
+static int spc_modesense_informational_exceptions(struct se_cmd *cmd, u8 pc, unsigned char *p)
{
p[0] = 0x1c;
p[1] = 0x0a;
static struct {
uint8_t page;
uint8_t subpage;
- int (*emulate)(struct se_device *, u8, unsigned char *);
+ int (*emulate)(struct se_cmd *, u8, unsigned char *);
} modesense_handlers[] = {
{ .page = 0x01, .subpage = 0x00, .emulate = spc_modesense_rwrecovery },
{ .page = 0x08, .subpage = 0x00, .emulate = spc_modesense_caching },
* the only two possibilities).
*/
if ((modesense_handlers[i].subpage & ~subpage) == 0) {
- ret = modesense_handlers[i].emulate(dev, pc, &buf[length]);
+ ret = modesense_handlers[i].emulate(cmd, pc, &buf[length]);
if (!ten && length + ret >= 255)
break;
length += ret;
for (i = 0; i < ARRAY_SIZE(modesense_handlers); ++i)
if (modesense_handlers[i].page == page &&
modesense_handlers[i].subpage == subpage) {
- length += modesense_handlers[i].emulate(dev, pc, &buf[length]);
+ length += modesense_handlers[i].emulate(cmd, pc, &buf[length]);
goto set_length;
}
static sense_reason_t spc_emulate_modeselect(struct se_cmd *cmd)
{
- struct se_device *dev = cmd->se_dev;
char *cdb = cmd->t_task_cdb;
bool ten = cdb[0] == MODE_SELECT_10;
int off = ten ? 8 : 4;
if (modesense_handlers[i].page == page &&
modesense_handlers[i].subpage == subpage) {
memset(tbuf, 0, SE_MODE_PAGE_BUF);
- length = modesense_handlers[i].emulate(dev, 0, tbuf);
+ length = modesense_handlers[i].emulate(cmd, 0, tbuf);
goto check_contents;
}
struct se_cmd *cmd,
int tas)
{
+ bool remove = true;
/*
* TASK ABORTED status (TAS) bit support
*/
if ((tmr_nacl &&
- (tmr_nacl == cmd->se_sess->se_node_acl)) || tas)
+ (tmr_nacl != cmd->se_sess->se_node_acl)) && tas) {
+ remove = false;
transport_send_task_abort(cmd);
+ }
- transport_cmd_finish_abort(cmd, 0);
+ transport_cmd_finish_abort(cmd, remove);
}
static int target_check_cdb_and_preempt(struct list_head *list,
if (dev != se_cmd->se_dev)
continue;
+
+ /* skip se_cmd associated with tmr */
+ if (tmr->task_cmd == se_cmd)
+ continue;
+
ref_tag = se_cmd->se_tfo->get_task_tag(se_cmd);
if (tmr->ref_task_tag != ref_tag)
continue;
cancel_work_sync(&se_cmd->work);
transport_wait_for_tasks(se_cmd);
- /*
- * Now send SAM_STAT_TASK_ABORTED status for the referenced
- * se_cmd descriptor..
- */
- transport_send_task_abort(se_cmd);
- /*
- * Also deal with possible extra acknowledge reference..
- */
- if (se_cmd->se_cmd_flags & SCF_ACK_KREF)
- target_put_sess_cmd(se_sess, se_cmd);
target_put_sess_cmd(se_sess, se_cmd);
+ transport_cmd_finish_abort(se_cmd, true);
printk("ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for"
" ref_tag: %d\n", ref_tag);
sub_api_initialized = 1;
}
-struct se_session *transport_init_session(void)
+struct se_session *transport_init_session(enum target_prot_op sup_prot_ops)
{
struct se_session *se_sess;
INIT_LIST_HEAD(&se_sess->sess_wait_list);
spin_lock_init(&se_sess->sess_cmd_lock);
kref_init(&se_sess->sess_kref);
+ se_sess->sup_prot_ops = sup_prot_ops;
return se_sess;
}
EXPORT_SYMBOL(transport_alloc_session_tags);
struct se_session *transport_init_session_tags(unsigned int tag_num,
- unsigned int tag_size)
+ unsigned int tag_size,
+ enum target_prot_op sup_prot_ops)
{
struct se_session *se_sess;
int rc;
- se_sess = transport_init_session();
+ se_sess = transport_init_session(sup_prot_ops);
if (IS_ERR(se_sess))
return se_sess;
void transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
{
+ if (cmd->se_cmd_flags & SCF_SE_LUN_CMD)
+ transport_lun_remove_cmd(cmd);
+ /*
+ * Allow the fabric driver to unmap any resources before
+ * releasing the descriptor via TFO->release_cmd()
+ */
+ if (remove)
+ cmd->se_tfo->aborted_task(cmd);
+
if (transport_cmd_check_stop_to_fabric(cmd))
return;
if (remove)
target_put_sess_cmd(se_sess, se_cmd);
return 0;
}
+
+ rc = target_setup_cmd_from_cdb(se_cmd, cdb);
+ if (rc != 0) {
+ transport_generic_request_failure(se_cmd, rc);
+ return 0;
+ }
+
/*
* Save pointers for SGLs containing protection information,
* if present.
se_cmd->t_prot_nents = sgl_prot_count;
}
- rc = target_setup_cmd_from_cdb(se_cmd, cdb);
- if (rc != 0) {
- transport_generic_request_failure(se_cmd, rc);
- return 0;
- }
/*
* When a non zero sgl_count has been passed perform SGL passthrough
* mapping for pre-allocated fabric memory instead of having target
cmd->t_state = TRANSPORT_PROCESSING;
cmd->transport_state |= CMD_T_ACTIVE|CMD_T_BUSY|CMD_T_SENT;
spin_unlock_irq(&cmd->t_state_lock);
+ /*
+ * Perform WRITE_INSERT of PI using software emulation when backend
+ * device has PI enabled, if the transport has not already generated
+ * PI using hardware WRITE_INSERT offload.
+ */
+ if (cmd->prot_op == TARGET_PROT_DOUT_INSERT) {
+ if (!(cmd->se_sess->sup_prot_ops & TARGET_PROT_DOUT_INSERT))
+ sbc_dif_generate(cmd);
+ }
if (target_handle_task_attr(cmd)) {
spin_lock_irq(&cmd->t_state_lock);
schedule_work(&cmd->se_dev->qf_work_queue);
}
+static bool target_check_read_strip(struct se_cmd *cmd)
+{
+ sense_reason_t rc;
+
+ if (!(cmd->se_sess->sup_prot_ops & TARGET_PROT_DIN_STRIP)) {
+ rc = sbc_dif_read_strip(cmd);
+ if (rc) {
+ cmd->pi_err = rc;
+ return true;
+ }
+ }
+
+ return false;
+}
+
static void target_complete_ok_work(struct work_struct *work)
{
struct se_cmd *cmd = container_of(work, struct se_cmd, work);
cmd->data_length;
}
spin_unlock(&cmd->se_lun->lun_sep_lock);
+ /*
+ * Perform READ_STRIP of PI using software emulation when
+ * backend had PI enabled, if the transport will not be
+ * performing hardware READ_STRIP offload.
+ */
+ if (cmd->prot_op == TARGET_PROT_DIN_STRIP &&
+ target_check_read_strip(cmd)) {
+ ret = transport_send_check_condition_and_sense(cmd,
+ cmd->pi_err, 0);
+ if (ret == -EAGAIN || ret == -ENOMEM)
+ goto queue_full;
+
+ transport_lun_remove_cmd(cmd);
+ transport_cmd_check_stop_to_fabric(cmd);
+ return;
+ }
trace_target_cmd_complete(cmd);
ret = cmd->se_tfo->queue_data_in(cmd);
transport_free_sgl(cmd->t_bidi_data_sg, cmd->t_bidi_data_nents);
cmd->t_bidi_data_sg = NULL;
cmd->t_bidi_data_nents = 0;
+
+ transport_free_sgl(cmd->t_prot_sg, cmd->t_prot_nents);
+ cmd->t_prot_sg = NULL;
+ cmd->t_prot_nents = 0;
}
/**
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
}
+ if (cmd->prot_op != TARGET_PROT_NORMAL) {
+ ret = target_alloc_sgl(&cmd->t_prot_sg,
+ &cmd->t_prot_nents,
+ cmd->prot_length, true);
+ if (ret < 0)
+ return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+ }
+
ret = target_alloc_sgl(&cmd->t_data_sg, &cmd->t_data_nents,
cmd->data_length, zero_flag);
if (ret < 0)
if (!(cmd->transport_state & CMD_T_ABORTED))
return 0;
- if (!send_status || (cmd->se_cmd_flags & SCF_SENT_DELAYED_TAS))
+ /*
+ * If cmd has been aborted but either no status is to be sent or it has
+ * already been sent, just return
+ */
+ if (!send_status || !(cmd->se_cmd_flags & SCF_SEND_DELAYED_TAS))
return 1;
pr_debug("Sending delayed SAM_STAT_TASK_ABORTED status for CDB: 0x%02x ITT: 0x%08x\n",
cmd->t_task_cdb[0], cmd->se_tfo->get_task_tag(cmd));
- cmd->se_cmd_flags |= SCF_SENT_DELAYED_TAS;
+ cmd->se_cmd_flags &= ~SCF_SEND_DELAYED_TAS;
cmd->scsi_status = SAM_STAT_TASK_ABORTED;
trace_target_cmd_complete(cmd);
cmd->se_tfo->queue_status(cmd);
unsigned long flags;
spin_lock_irqsave(&cmd->t_state_lock, flags);
- if (cmd->se_cmd_flags & (SCF_SENT_CHECK_CONDITION | SCF_SENT_DELAYED_TAS)) {
+ if (cmd->se_cmd_flags & (SCF_SENT_CHECK_CONDITION)) {
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
return;
}
if (cmd->data_direction == DMA_TO_DEVICE) {
if (cmd->se_tfo->write_pending_status(cmd) != 0) {
cmd->transport_state |= CMD_T_ABORTED;
+ cmd->se_cmd_flags |= SCF_SEND_DELAYED_TAS;
smp_mb__after_atomic_inc();
return;
}
*/
struct ft_tpg {
u32 index;
- struct ft_lport_acl *lport_acl;
+ struct ft_lport_wwn *lport_wwn;
struct ft_tport *tport; /* active tport or NULL */
- struct list_head list; /* linkage in ft_lport_acl tpg_list */
struct list_head lun_list; /* head of LUNs */
struct se_portal_group se_tpg;
struct workqueue_struct *workqueue;
};
-struct ft_lport_acl {
+struct ft_lport_wwn {
u64 wwpn;
char name[FT_NAMELEN];
- struct list_head list;
- struct list_head tpg_list;
- struct se_wwn fc_lport_wwn;
+ struct list_head ft_wwn_node;
+ struct ft_tpg *tpg;
+ struct se_wwn se_wwn;
};
/*
u32 sg_cnt; /* No. of item in scatterlist */
};
-extern struct list_head ft_lport_list;
extern struct mutex ft_lport_lock;
extern struct fc4_prov ft_prov;
extern struct target_fabric_configfs *ft_configfs;
u32 ft_get_task_tag(struct se_cmd *);
int ft_get_cmd_state(struct se_cmd *);
void ft_queue_tm_resp(struct se_cmd *);
+void ft_aborted_task(struct se_cmd *);
/*
* other internal functions.
ft_send_resp_code(cmd, code);
}
+void ft_aborted_task(struct se_cmd *se_cmd)
+{
+ return;
+}
+
static void ft_send_work(struct work_struct *work);
/*
struct target_fabric_configfs *ft_configfs;
-LIST_HEAD(ft_lport_list);
+static LIST_HEAD(ft_wwn_list);
DEFINE_MUTEX(ft_lport_lock);
unsigned int ft_debug_logging;
struct config_group *group,
const char *name)
{
- struct ft_lport_acl *lacl;
+ struct ft_lport_wwn *ft_wwn;
struct ft_tpg *tpg;
struct workqueue_struct *wq;
unsigned long index;
if (index > UINT_MAX)
return NULL;
- lacl = container_of(wwn, struct ft_lport_acl, fc_lport_wwn);
+ if ((index != 1)) {
+ pr_err("Error, a single TPG=1 is used for HW port mappings\n");
+ return ERR_PTR(-ENOSYS);
+ }
+
+ ft_wwn = container_of(wwn, struct ft_lport_wwn, se_wwn);
tpg = kzalloc(sizeof(*tpg), GFP_KERNEL);
if (!tpg)
return NULL;
tpg->index = index;
- tpg->lport_acl = lacl;
+ tpg->lport_wwn = ft_wwn;
INIT_LIST_HEAD(&tpg->lun_list);
wq = alloc_workqueue("tcm_fc", 0, 1);
tpg->workqueue = wq;
mutex_lock(&ft_lport_lock);
- list_add_tail(&tpg->list, &lacl->tpg_list);
+ ft_wwn->tpg = tpg;
mutex_unlock(&ft_lport_lock);
return &tpg->se_tpg;
static void ft_del_tpg(struct se_portal_group *se_tpg)
{
struct ft_tpg *tpg = container_of(se_tpg, struct ft_tpg, se_tpg);
+ struct ft_lport_wwn *ft_wwn = tpg->lport_wwn;
pr_debug("del tpg %s\n",
config_item_name(&tpg->se_tpg.tpg_group.cg_item));
synchronize_rcu();
mutex_lock(&ft_lport_lock);
- list_del(&tpg->list);
+ ft_wwn->tpg = NULL;
if (tpg->tport) {
tpg->tport->tpg = NULL;
tpg->tport = NULL;
*/
struct ft_tpg *ft_lport_find_tpg(struct fc_lport *lport)
{
- struct ft_lport_acl *lacl;
- struct ft_tpg *tpg;
+ struct ft_lport_wwn *ft_wwn;
- list_for_each_entry(lacl, &ft_lport_list, list) {
- if (lacl->wwpn == lport->wwpn) {
- list_for_each_entry(tpg, &lacl->tpg_list, list)
- return tpg; /* XXX for now return first entry */
- return NULL;
- }
+ list_for_each_entry(ft_wwn, &ft_wwn_list, ft_wwn_node) {
+ if (ft_wwn->wwpn == lport->wwpn)
+ return ft_wwn->tpg;
}
return NULL;
}
* Add lport to allowed config.
* The name is the WWPN in lower-case ASCII, colon-separated bytes.
*/
-static struct se_wwn *ft_add_lport(
+static struct se_wwn *ft_add_wwn(
struct target_fabric_configfs *tf,
struct config_group *group,
const char *name)
{
- struct ft_lport_acl *lacl;
- struct ft_lport_acl *old_lacl;
+ struct ft_lport_wwn *ft_wwn;
+ struct ft_lport_wwn *old_ft_wwn;
u64 wwpn;
- pr_debug("add lport %s\n", name);
+ pr_debug("add wwn %s\n", name);
if (ft_parse_wwn(name, &wwpn, 1) < 0)
return NULL;
- lacl = kzalloc(sizeof(*lacl), GFP_KERNEL);
- if (!lacl)
+ ft_wwn = kzalloc(sizeof(*ft_wwn), GFP_KERNEL);
+ if (!ft_wwn)
return NULL;
- lacl->wwpn = wwpn;
- INIT_LIST_HEAD(&lacl->tpg_list);
+ ft_wwn->wwpn = wwpn;
mutex_lock(&ft_lport_lock);
- list_for_each_entry(old_lacl, &ft_lport_list, list) {
- if (old_lacl->wwpn == wwpn) {
+ list_for_each_entry(old_ft_wwn, &ft_wwn_list, ft_wwn_node) {
+ if (old_ft_wwn->wwpn == wwpn) {
mutex_unlock(&ft_lport_lock);
- kfree(lacl);
+ kfree(ft_wwn);
return NULL;
}
}
- list_add_tail(&lacl->list, &ft_lport_list);
- ft_format_wwn(lacl->name, sizeof(lacl->name), wwpn);
+ list_add_tail(&ft_wwn->ft_wwn_node, &ft_wwn_list);
+ ft_format_wwn(ft_wwn->name, sizeof(ft_wwn->name), wwpn);
mutex_unlock(&ft_lport_lock);
- return &lacl->fc_lport_wwn;
+ return &ft_wwn->se_wwn;
}
-static void ft_del_lport(struct se_wwn *wwn)
+static void ft_del_wwn(struct se_wwn *wwn)
{
- struct ft_lport_acl *lacl = container_of(wwn,
- struct ft_lport_acl, fc_lport_wwn);
+ struct ft_lport_wwn *ft_wwn = container_of(wwn,
+ struct ft_lport_wwn, se_wwn);
- pr_debug("del lport %s\n", lacl->name);
+ pr_debug("del wwn %s\n", ft_wwn->name);
mutex_lock(&ft_lport_lock);
- list_del(&lacl->list);
+ list_del(&ft_wwn->ft_wwn_node);
mutex_unlock(&ft_lport_lock);
- kfree(lacl);
+ kfree(ft_wwn);
}
static ssize_t ft_wwn_show_attr_version(
{
struct ft_tpg *tpg = se_tpg->se_tpg_fabric_ptr;
- return tpg->lport_acl->name;
+ return tpg->lport_wwn->name;
}
static u16 ft_get_tag(struct se_portal_group *se_tpg)
.queue_data_in = ft_queue_data_in,
.queue_status = ft_queue_status,
.queue_tm_rsp = ft_queue_tm_resp,
+ .aborted_task = ft_aborted_task,
/*
* Setup function pointers for generic logic in
* target_core_fabric_configfs.c
*/
- .fabric_make_wwn = &ft_add_lport,
- .fabric_drop_wwn = &ft_del_lport,
+ .fabric_make_wwn = &ft_add_wwn,
+ .fabric_drop_wwn = &ft_del_wwn,
.fabric_make_tpg = &ft_add_tpg,
.fabric_drop_tpg = &ft_del_tpg,
.fabric_post_link = NULL,
* Lookup or allocate target local port.
* Caller holds ft_lport_lock.
*/
-static struct ft_tport *ft_tport_create(struct fc_lport *lport)
+static struct ft_tport *ft_tport_get(struct fc_lport *lport)
{
struct ft_tpg *tpg;
struct ft_tport *tport;
if (tport) {
tport->tpg = tpg;
+ tpg->tport = tport;
return tport;
}
void ft_lport_add(struct fc_lport *lport, void *arg)
{
mutex_lock(&ft_lport_lock);
- ft_tport_create(lport);
+ ft_tport_get(lport);
mutex_unlock(&ft_lport_lock);
}
return NULL;
sess->se_sess = transport_init_session_tags(TCM_FC_DEFAULT_TAGS,
- sizeof(struct ft_cmd));
+ sizeof(struct ft_cmd),
+ TARGET_PROT_NORMAL);
if (IS_ERR(sess->se_sess)) {
kfree(sess);
return NULL;
struct ft_node_acl *acl;
u32 fcp_parm;
- tport = ft_tport_create(rdata->local_port);
+ tport = ft_tport_get(rdata->local_port);
if (!tport)
goto not_target; /* not a target for this local port */
#define IMX_POLLING_DELAY 2000 /* millisecond */
#define IMX_PASSIVE_DELAY 1000
+#define FACTOR0 10000000
+#define FACTOR1 15976
+#define FACTOR2 4297157
+
struct imx_thermal_data {
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
enum thermal_device_mode mode;
struct regmap *tempmon;
- int c1, c2; /* See formula in imx_get_sensor_data() */
+ u32 c1, c2; /* See formula in imx_get_sensor_data() */
unsigned long temp_passive;
unsigned long temp_critical;
unsigned long alarm_temp;
int alarm_value;
data->alarm_temp = alarm_temp;
- alarm_value = (alarm_temp - data->c2) / data->c1;
+ alarm_value = (data->c2 - alarm_temp) / data->c1;
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_ALARM_VALUE_MASK);
regmap_write(map, TEMPSENSE0 + REG_SET, alarm_value <<
TEMPSENSE0_ALARM_VALUE_SHIFT);
n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT;
/* See imx_get_sensor_data() for formula derivation */
- *temp = data->c2 + data->c1 * n_meas;
+ *temp = data->c2 - n_meas * data->c1;
/* Update alarm value to next higher trip point */
if (data->alarm_temp == data->temp_passive && *temp >= data->temp_passive)
int t1, t2, n1, n2;
int ret;
u32 val;
+ u64 temp64;
map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"fsl,tempmon-data");
* [31:20] - sensor value @ 25C
* [19:8] - sensor value of hot
* [7:0] - hot temperature value
+ * Use universal formula now and only need sensor value @ 25C
+ * slope = 0.4297157 - (0.0015976 * 25C fuse)
*/
n1 = val >> 20;
n2 = (val & 0xfff00) >> 8;
t1 = 25; /* t1 always 25C */
/*
- * Derived from linear interpolation,
- * Tmeas = T2 + (Nmeas - N2) * (T1 - T2) / (N1 - N2)
+ * Derived from linear interpolation:
+ * slope = 0.4297157 - (0.0015976 * 25C fuse)
+ * slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0
+ * (Nmeas - n1) / (Tmeas - t1) = slope
* We want to reduce this down to the minimum computation necessary
* for each temperature read. Also, we want Tmeas in millicelsius
* and we don't want to lose precision from integer division. So...
- * milli_Tmeas = 1000 * T2 + 1000 * (Nmeas - N2) * (T1 - T2) / (N1 - N2)
- * Let constant c1 = 1000 * (T1 - T2) / (N1 - N2)
- * milli_Tmeas = (1000 * T2) + c1 * (Nmeas - N2)
- * milli_Tmeas = (1000 * T2) + (c1 * Nmeas) - (c1 * N2)
- * Let constant c2 = (1000 * T2) - (c1 * N2)
- * milli_Tmeas = c2 + (c1 * Nmeas)
+ * Tmeas = (Nmeas - n1) / slope + t1
+ * milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1
+ * milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1
+ * Let constant c1 = (-1000 / slope)
+ * milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1
+ * Let constant c2 = n1 *c1 + 1000 * t1
+ * milli_Tmeas = c2 - Nmeas * c1
*/
- data->c1 = 1000 * (t1 - t2) / (n1 - n2);
- data->c2 = 1000 * t2 - data->c1 * n2;
+ temp64 = FACTOR0;
+ temp64 *= 1000;
+ do_div(temp64, FACTOR1 * n1 - FACTOR2);
+ data->c1 = temp64;
+ data->c2 = n1 * data->c1 + 1000 * t1;
/*
* Set the default passive cooling trip point to 20 °C below the
static void rcar_thermal_work(struct work_struct *work)
{
struct rcar_thermal_priv *priv;
+ unsigned long cctemp, nctemp;
priv = container_of(work, struct rcar_thermal_priv, work.work);
+ rcar_thermal_get_temp(priv->zone, &cctemp);
rcar_thermal_update_temp(priv);
rcar_thermal_irq_enable(priv);
- thermal_zone_device_update(priv->zone);
+
+ rcar_thermal_get_temp(priv->zone, &nctemp);
+ if (nctemp != cctemp)
+ thermal_zone_device_update(priv->zone);
}
static u32 rcar_thermal_had_changed(struct rcar_thermal_priv *priv, u32 status)
status = (status >> rcar_id_to_shift(priv)) & 0x3;
- if (status & 0x3) {
+ if (status) {
dev_dbg(dev, "thermal%d %s%s\n",
priv->id,
(status & 0x2) ? "Rising " : "",
return ti_bandgap_restore_ctxt(bgp);
}
-static const struct dev_pm_ops ti_bandgap_dev_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(ti_bandgap_suspend,
- ti_bandgap_resume)
-};
+static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
+ ti_bandgap_resume);
#define DEV_PM_OPS (&ti_bandgap_dev_pm_ops)
#else
/* For early boot console */
static struct hvc_opal_priv hvc_opal_boot_priv;
static u32 hvc_opal_boot_termno;
+static bool hvc_opal_event_registered;
static const struct hv_ops hvc_opal_raw_ops = {
.get_chars = opal_get_chars,
.tiocmset = hvc_opal_hvsi_tiocmset,
};
+static int hvc_opal_console_event(struct notifier_block *nb,
+ unsigned long events, void *change)
+{
+ if (events & OPAL_EVENT_CONSOLE_INPUT)
+ hvc_kick();
+ return 0;
+}
+
+static struct notifier_block hvc_opal_console_nb = {
+ .notifier_call = hvc_opal_console_event,
+};
+
static int hvc_opal_probe(struct platform_device *dev)
{
const struct hv_ops *ops;
unsigned int termno, boot = 0;
const __be32 *reg;
+
if (of_device_is_compatible(dev->dev.of_node, "ibm,opal-console-raw")) {
proto = HV_PROTOCOL_RAW;
ops = &hvc_opal_raw_ops;
dev->dev.of_node->full_name,
boot ? " (boot console)" : "");
- /* We don't do IRQ yet */
+ /* We don't do IRQ ... */
hp = hvc_alloc(termno, 0, ops, MAX_VIO_PUT_CHARS);
if (IS_ERR(hp))
return PTR_ERR(hp);
dev_set_drvdata(&dev->dev, hp);
+ /* ... but we use OPAL event to kick the console */
+ if (!hvc_opal_event_registered) {
+ opal_notifier_register(&hvc_opal_console_nb);
+ hvc_opal_event_registered = true;
+ }
+
return 0;
}
{
struct audit_buffer *ab;
struct task_struct *tsk = current;
+ pid_t pid = task_pid_nr(tsk);
uid_t uid = from_kuid(&init_user_ns, task_uid(tsk));
uid_t loginuid = from_kuid(&init_user_ns, audit_get_loginuid(tsk));
unsigned int sessionid = audit_get_sessionid(tsk);
char name[sizeof(tsk->comm)];
audit_log_format(ab, "%s pid=%u uid=%u auid=%u ses=%u major=%d"
- " minor=%d comm=", description, tsk->pid, uid,
+ " minor=%d comm=", description, pid, uid,
loginuid, sessionid, major, minor);
get_task_comm(name, tsk);
audit_log_untrustedstring(ab, name);
{
}
+static void usbg_aborted_task(struct se_cmd *se_cmd)
+{
+ return;
+}
+
static const char *usbg_check_wwn(const char *name)
{
const char *n;
pr_err("Unable to allocate struct tcm_vhost_nexus\n");
goto err_unlock;
}
- tv_nexus->tvn_se_sess = transport_init_session();
+ tv_nexus->tvn_se_sess = transport_init_session(TARGET_PROT_NORMAL);
if (IS_ERR(tv_nexus->tvn_se_sess))
goto err_free;
.queue_data_in = usbg_send_read_response,
.queue_status = usbg_send_status_response,
.queue_tm_rsp = usbg_queue_tm_rsp,
+ .aborted_task = usbg_aborted_task,
.check_stop_free = usbg_check_stop_free,
.fabric_make_wwn = usbg_make_tport,
vhost_dev_cleanup(&n->dev, false);
vhost_net_vq_reset(n);
if (tx_sock)
- fput(tx_sock->file);
+ sockfd_put(tx_sock);
if (rx_sock)
- fput(rx_sock->file);
+ sockfd_put(rx_sock);
/* Make sure no callbacks are outstanding */
synchronize_rcu_bh();
/* We do an extra flush before freeing memory,
}
return sock;
err:
- fput(sock->file);
+ sockfd_put(sock);
return ERR_PTR(r);
}
if (oldsock) {
vhost_net_flush_vq(n, index);
- fput(oldsock->file);
+ sockfd_put(oldsock);
}
mutex_unlock(&n->dev.mutex);
if (ubufs)
vhost_net_ubuf_put_wait_and_free(ubufs);
err_ubufs:
- fput(sock->file);
+ sockfd_put(sock);
err_vq:
mutex_unlock(&vq->mutex);
err:
done:
mutex_unlock(&n->dev.mutex);
if (tx_sock)
- fput(tx_sock->file);
+ sockfd_put(tx_sock);
if (rx_sock)
- fput(rx_sock->file);
+ sockfd_put(rx_sock);
return err;
}
return;
}
+static void tcm_vhost_aborted_task(struct se_cmd *se_cmd)
+{
+ return;
+}
+
static void tcm_vhost_free_evt(struct vhost_scsi *vs, struct tcm_vhost_evt *evt)
{
vs->vs_events_nr--;
*/
tv_nexus->tvn_se_sess = transport_init_session_tags(
TCM_VHOST_DEFAULT_TAGS,
- sizeof(struct tcm_vhost_cmd));
+ sizeof(struct tcm_vhost_cmd),
+ TARGET_PROT_NORMAL);
if (IS_ERR(tv_nexus->tvn_se_sess)) {
mutex_unlock(&tpg->tv_tpg_mutex);
kfree(tv_nexus);
.queue_data_in = tcm_vhost_queue_data_in,
.queue_status = tcm_vhost_queue_status,
.queue_tm_rsp = tcm_vhost_queue_tm_rsp,
+ .aborted_task = tcm_vhost_aborted_task,
/*
* Setup callers for generic logic in target_core_fabric_configfs.c
*/
rc = device_register(&new_bd->dev);
if (rc) {
- kfree(new_bd);
+ put_device(&new_bd->dev);
return ERR_PTR(rc);
}
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/platform_data/gpio_backlight.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
int gpio;
int active;
+ int def_value;
};
static int gpio_backlight_update_status(struct backlight_device *bl)
.check_fb = gpio_backlight_check_fb,
};
+static int gpio_backlight_probe_dt(struct platform_device *pdev,
+ struct gpio_backlight *gbl)
+{
+ struct device_node *np = pdev->dev.of_node;
+ enum of_gpio_flags gpio_flags;
+
+ gbl->gpio = of_get_gpio_flags(np, 0, &gpio_flags);
+
+ if (!gpio_is_valid(gbl->gpio)) {
+ if (gbl->gpio != -EPROBE_DEFER) {
+ dev_err(&pdev->dev,
+ "Error: The gpios parameter is missing or invalid.\n");
+ }
+ return gbl->gpio;
+ }
+
+ gbl->active = (gpio_flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
+
+ gbl->def_value = of_property_read_bool(np, "default-on");
+
+ return 0;
+}
+
static int gpio_backlight_probe(struct platform_device *pdev)
{
struct gpio_backlight_platform_data *pdata =
struct backlight_properties props;
struct backlight_device *bl;
struct gpio_backlight *gbl;
+ struct device_node *np = pdev->dev.of_node;
int ret;
- if (!pdata) {
- dev_err(&pdev->dev, "failed to find platform data\n");
+ if (!pdata && !np) {
+ dev_err(&pdev->dev,
+ "failed to find platform data or device tree node.\n");
return -ENODEV;
}
return -ENOMEM;
gbl->dev = &pdev->dev;
- gbl->fbdev = pdata->fbdev;
- gbl->gpio = pdata->gpio;
- gbl->active = pdata->active_low ? 0 : 1;
+
+ if (np) {
+ ret = gpio_backlight_probe_dt(pdev, gbl);
+ if (ret)
+ return ret;
+ } else {
+ gbl->fbdev = pdata->fbdev;
+ gbl->gpio = pdata->gpio;
+ gbl->active = pdata->active_low ? 0 : 1;
+ gbl->def_value = pdata->def_value;
+ }
ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT |
(gbl->active ? GPIOF_INIT_LOW
: GPIOF_INIT_HIGH),
- pdata->name);
+ pdata ? pdata->name : "backlight");
if (ret < 0) {
dev_err(&pdev->dev, "unable to request GPIO\n");
return ret;
return PTR_ERR(bl);
}
- bl->props.brightness = pdata->def_value;
+ bl->props.brightness = gbl->def_value;
backlight_update_status(bl);
platform_set_drvdata(pdev, bl);
return 0;
}
+#ifdef CONFIG_OF
+static struct of_device_id gpio_backlight_of_match[] = {
+ { .compatible = "gpio-backlight" },
+ { /* sentinel */ }
+};
+#endif
+
static struct platform_driver gpio_backlight_driver = {
.driver = {
.name = "gpio-backlight",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(gpio_backlight_of_match),
},
.probe = gpio_backlight_probe,
};
props.brightness = pdata->init_brt_led;
props.max_brightness = pdata->max_brt_led;
pchip->bled =
- backlight_device_register("lm3639_bled", pchip->dev, pchip,
- &lm3639_bled_ops, &props);
+ devm_backlight_device_register(pchip->dev, "lm3639_bled",
+ pchip->dev, pchip, &lm3639_bled_ops,
+ &props);
if (IS_ERR(pchip->bled)) {
dev_err(&client->dev, "fail : backlight register\n");
ret = PTR_ERR(pchip->bled);
ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode);
if (ret < 0) {
dev_err(&client->dev, "failed : add sysfs entries\n");
- goto err_bled_mode;
+ goto err_out;
}
/* flash */
led_classdev_unregister(&pchip->cdev_flash);
err_flash:
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
-err_bled_mode:
- backlight_device_unregister(pchip->bled);
err_out:
return ret;
}
led_classdev_unregister(&pchip->cdev_torch);
if (&pchip->cdev_flash)
led_classdev_unregister(&pchip->cdev_flash);
- if (pchip->bled) {
+ if (pchip->bled)
device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode);
- backlight_device_unregister(pchip->bled);
- }
return 0;
}
module_i2c_driver(lm3639_i2c_driver);
MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639");
-MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
-MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
+MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>");
MODULE_LICENSE("GPL v2");
struct aio_ring {
unsigned id; /* kernel internal index number */
unsigned nr; /* number of io_events */
- unsigned head;
+ unsigned head; /* Written to by userland or under ring_lock
+ * mutex by aio_read_events_ring(). */
unsigned tail;
unsigned magic;
{
int i;
+ /* Disconnect the kiotx from the ring file. This prevents future
+ * accesses to the kioctx from page migration.
+ */
+ put_aio_ring_file(ctx);
+
for (i = 0; i < ctx->nr_pages; i++) {
struct page *page;
pr_debug("pid(%d) [%d] page->count=%d\n", current->pid, i,
put_page(page);
}
- put_aio_ring_file(ctx);
-
if (ctx->ring_pages && ctx->ring_pages != ctx->internal_pages) {
kfree(ctx->ring_pages);
ctx->ring_pages = NULL;
{
struct kioctx *ctx;
unsigned long flags;
+ pgoff_t idx;
int rc;
rc = 0;
- /* Make sure the old page hasn't already been changed */
+ /* mapping->private_lock here protects against the kioctx teardown. */
spin_lock(&mapping->private_lock);
ctx = mapping->private_data;
- if (ctx) {
- pgoff_t idx;
- spin_lock_irqsave(&ctx->completion_lock, flags);
- idx = old->index;
- if (idx < (pgoff_t)ctx->nr_pages) {
- if (ctx->ring_pages[idx] != old)
- rc = -EAGAIN;
- } else
- rc = -EINVAL;
- spin_unlock_irqrestore(&ctx->completion_lock, flags);
+ if (!ctx) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* The ring_lock mutex. The prevents aio_read_events() from writing
+ * to the ring's head, and prevents page migration from mucking in
+ * a partially initialized kiotx.
+ */
+ if (!mutex_trylock(&ctx->ring_lock)) {
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ idx = old->index;
+ if (idx < (pgoff_t)ctx->nr_pages) {
+ /* Make sure the old page hasn't already been changed */
+ if (ctx->ring_pages[idx] != old)
+ rc = -EAGAIN;
} else
rc = -EINVAL;
- spin_unlock(&mapping->private_lock);
if (rc != 0)
- return rc;
+ goto out_unlock;
/* Writeback must be complete */
BUG_ON(PageWriteback(old));
rc = migrate_page_move_mapping(mapping, new, old, NULL, mode, 1);
if (rc != MIGRATEPAGE_SUCCESS) {
put_page(new);
- return rc;
+ goto out_unlock;
}
- /* We can potentially race against kioctx teardown here. Use the
- * address_space's private data lock to protect the mapping's
- * private_data.
+ /* Take completion_lock to prevent other writes to the ring buffer
+ * while the old page is copied to the new. This prevents new
+ * events from being lost.
*/
- spin_lock(&mapping->private_lock);
- ctx = mapping->private_data;
- if (ctx) {
- pgoff_t idx;
- spin_lock_irqsave(&ctx->completion_lock, flags);
- migrate_page_copy(new, old);
- idx = old->index;
- if (idx < (pgoff_t)ctx->nr_pages) {
- /* And only do the move if things haven't changed */
- if (ctx->ring_pages[idx] == old)
- ctx->ring_pages[idx] = new;
- else
- rc = -EAGAIN;
- } else
- rc = -EINVAL;
- spin_unlock_irqrestore(&ctx->completion_lock, flags);
- } else
- rc = -EBUSY;
- spin_unlock(&mapping->private_lock);
+ spin_lock_irqsave(&ctx->completion_lock, flags);
+ migrate_page_copy(new, old);
+ BUG_ON(ctx->ring_pages[idx] != old);
+ ctx->ring_pages[idx] = new;
+ spin_unlock_irqrestore(&ctx->completion_lock, flags);
- if (rc == MIGRATEPAGE_SUCCESS)
- put_page(old);
- else
- put_page(new);
+ /* The old page is no longer accessible. */
+ put_page(old);
+out_unlock:
+ mutex_unlock(&ctx->ring_lock);
+out:
+ spin_unlock(&mapping->private_lock);
return rc;
}
#endif
file = aio_private_file(ctx, nr_pages);
if (IS_ERR(file)) {
ctx->aio_ring_file = NULL;
- return -EAGAIN;
+ return -ENOMEM;
}
ctx->aio_ring_file = file;
if (unlikely(i != nr_pages)) {
aio_free_ring(ctx);
- return -EAGAIN;
+ return -ENOMEM;
}
ctx->mmap_size = nr_pages * PAGE_SIZE;
if (IS_ERR((void *)ctx->mmap_base)) {
ctx->mmap_size = 0;
aio_free_ring(ctx);
- return -EAGAIN;
+ return -ENOMEM;
}
pr_debug("mmap address: 0x%08lx\n", ctx->mmap_base);
rcu_read_unlock();
spin_unlock(&mm->ioctx_lock);
+ /* While kioctx setup is in progress,
+ * we are protected from page migration
+ * changes ring_pages by ->ring_lock.
+ */
ring = kmap_atomic(ctx->ring_pages[0]);
ring->id = ctx->id;
kunmap_atomic(ring);
ctx->max_reqs = nr_events;
- if (percpu_ref_init(&ctx->users, free_ioctx_users))
- goto err;
-
- if (percpu_ref_init(&ctx->reqs, free_ioctx_reqs))
- goto err;
-
spin_lock_init(&ctx->ctx_lock);
spin_lock_init(&ctx->completion_lock);
mutex_init(&ctx->ring_lock);
+ /* Protect against page migration throughout kiotx setup by keeping
+ * the ring_lock mutex held until setup is complete. */
+ mutex_lock(&ctx->ring_lock);
init_waitqueue_head(&ctx->wait);
INIT_LIST_HEAD(&ctx->active_reqs);
+ if (percpu_ref_init(&ctx->users, free_ioctx_users))
+ goto err;
+
+ if (percpu_ref_init(&ctx->reqs, free_ioctx_reqs))
+ goto err;
+
ctx->cpu = alloc_percpu(struct kioctx_cpu);
if (!ctx->cpu)
goto err;
- if (aio_setup_ring(ctx) < 0)
+ err = aio_setup_ring(ctx);
+ if (err < 0)
goto err;
atomic_set(&ctx->reqs_available, ctx->nr_events - 1);
if (err)
goto err_cleanup;
+ /* Release the ring_lock mutex now that all setup is complete. */
+ mutex_unlock(&ctx->ring_lock);
+
pr_debug("allocated ioctx %p[%ld]: mm=%p mask=0x%x\n",
ctx, ctx->user_id, mm, ctx->nr_events);
return ctx;
err_ctx:
aio_free_ring(ctx);
err:
+ mutex_unlock(&ctx->ring_lock);
free_percpu(ctx->cpu);
free_percpu(ctx->reqs.pcpu_count);
free_percpu(ctx->users.pcpu_count);
mutex_lock(&ctx->ring_lock);
+ /* Access to ->ring_pages here is protected by ctx->ring_lock. */
ring = kmap_atomic(ctx->ring_pages[0]);
head = ring->head;
tail = ring->tail;
if (tmp.size < sizeof(tmp))
return ERR_PTR(-EINVAL);
+ if (tmp.size > (PATH_MAX + sizeof(tmp)))
+ return ERR_PTR(-ENAMETOOLONG);
+
return memdup_user(in, tmp.size);
}
*/
int bio_integrity_enabled(struct bio *bio)
{
+ if (!bio_is_rw(bio))
+ return 0;
+
/* Already protected? */
if (bio_integrity(bio))
return 0;
{
struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
struct blk_integrity_exchg bix;
- struct bio_vec bv;
- struct bvec_iter iter;
+ struct bio_vec *bv;
sector_t sector;
- unsigned int sectors, ret = 0;
+ unsigned int sectors, ret = 0, i;
void *prot_buf = bio->bi_integrity->bip_buf;
if (operate)
bix.disk_name = bio->bi_bdev->bd_disk->disk_name;
bix.sector_size = bi->sector_size;
- bio_for_each_segment(bv, bio, iter) {
- void *kaddr = kmap_atomic(bv.bv_page);
- bix.data_buf = kaddr + bv.bv_offset;
- bix.data_size = bv.bv_len;
+ bio_for_each_segment_all(bv, bio, i) {
+ void *kaddr = kmap_atomic(bv->bv_page);
+ bix.data_buf = kaddr + bv->bv_offset;
+ bix.data_size = bv->bv_len;
bix.prot_buf = prot_buf;
bix.sector = sector;
- if (operate) {
+ if (operate)
bi->generate_fn(&bix);
- } else {
+ else {
ret = bi->verify_fn(&bix);
if (ret) {
kunmap_atomic(kaddr);
}
}
- sectors = bv.bv_len / bi->sector_size;
+ sectors = bv->bv_len / bi->sector_size;
sector += sectors;
prot_buf += sectors * bi->tuple_size;
};
static void bio_set_map_data(struct bio_map_data *bmd, struct bio *bio,
- struct sg_iovec *iov, int iov_count,
+ const struct sg_iovec *iov, int iov_count,
int is_our_pages)
{
memcpy(bmd->sgvecs, iov, sizeof(struct sg_iovec) * iov_count);
sizeof(struct sg_iovec) * iov_count, gfp_mask);
}
-static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count,
+static int __bio_copy_iov(struct bio *bio, const struct sg_iovec *iov, int iov_count,
int to_user, int from_user, int do_free_page)
{
int ret = 0, i;
*/
struct bio *bio_copy_user_iov(struct request_queue *q,
struct rq_map_data *map_data,
- struct sg_iovec *iov, int iov_count,
+ const struct sg_iovec *iov, int iov_count,
int write_to_vm, gfp_t gfp_mask)
{
struct bio_map_data *bmd;
static struct bio *__bio_map_user_iov(struct request_queue *q,
struct block_device *bdev,
- struct sg_iovec *iov, int iov_count,
+ const struct sg_iovec *iov, int iov_count,
int write_to_vm, gfp_t gfp_mask)
{
int i, j;
* device. Returns an error pointer in case of error.
*/
struct bio *bio_map_user_iov(struct request_queue *q, struct block_device *bdev,
- struct sg_iovec *iov, int iov_count,
+ const struct sg_iovec *iov, int iov_count,
int write_to_vm, gfp_t gfp_mask)
{
struct bio *bio;
BUG_ON(iocb->ki_pos != pos);
blk_start_plug(&plug);
- ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
+ ret = __generic_file_aio_write(iocb, iov, nr_segs);
if (ret > 0) {
ssize_t err;
void btrfs_workqueue_set_max(struct btrfs_workqueue *wq, int max)
{
+ if (!wq)
+ return;
wq->normal->max_active = max;
if (wq->high)
wq->high->max_active = max;
goto out;
}
- root_level = btrfs_old_root_level(root, time_seq);
+ if (path->search_commit_root)
+ root_level = btrfs_header_level(root->commit_root);
+ else
+ root_level = btrfs_old_root_level(root, time_seq);
if (root_level + 1 == level) {
srcu_read_unlock(&fs_info->subvol_srcu, index);
*
* returns 0 on success, < 0 on error.
*/
-int btrfs_find_all_roots(struct btrfs_trans_handle *trans,
- struct btrfs_fs_info *fs_info, u64 bytenr,
- u64 time_seq, struct ulist **roots)
+static int __btrfs_find_all_roots(struct btrfs_trans_handle *trans,
+ struct btrfs_fs_info *fs_info, u64 bytenr,
+ u64 time_seq, struct ulist **roots)
{
struct ulist *tmp;
struct ulist_node *node = NULL;
return 0;
}
+int btrfs_find_all_roots(struct btrfs_trans_handle *trans,
+ struct btrfs_fs_info *fs_info, u64 bytenr,
+ u64 time_seq, struct ulist **roots)
+{
+ int ret;
+
+ if (!trans)
+ down_read(&fs_info->commit_root_sem);
+ ret = __btrfs_find_all_roots(trans, fs_info, bytenr, time_seq, roots);
+ if (!trans)
+ up_read(&fs_info->commit_root_sem);
+ return ret;
+}
+
/*
* this makes the path point to (inum INODE_ITEM ioff)
*/
if (IS_ERR(trans))
return PTR_ERR(trans);
btrfs_get_tree_mod_seq(fs_info, &tree_mod_seq_elem);
+ } else {
+ down_read(&fs_info->commit_root_sem);
}
ret = btrfs_find_all_leafs(trans, fs_info, extent_item_objectid,
ULIST_ITER_INIT(&ref_uiter);
while (!ret && (ref_node = ulist_next(refs, &ref_uiter))) {
- ret = btrfs_find_all_roots(trans, fs_info, ref_node->val,
- tree_mod_seq_elem.seq, &roots);
+ ret = __btrfs_find_all_roots(trans, fs_info, ref_node->val,
+ tree_mod_seq_elem.seq, &roots);
if (ret)
break;
ULIST_ITER_INIT(&root_uiter);
if (!search_commit_root) {
btrfs_put_tree_mod_seq(fs_info, &tree_mod_seq_elem);
btrfs_end_transaction(trans, fs_info->extent_root);
+ } else {
+ up_read(&fs_info->commit_root_sem);
}
return ret;
* the commit roots are read only
* so we always do read locks
*/
+ if (p->need_commit_sem)
+ down_read(&root->fs_info->commit_root_sem);
b = root->commit_root;
extent_buffer_get(b);
level = btrfs_header_level(b);
+ if (p->need_commit_sem)
+ up_read(&root->fs_info->commit_root_sem);
if (!p->skip_locking)
btrfs_tree_read_lock(b);
} else {
{
int ret;
int cmp;
- struct btrfs_trans_handle *trans = NULL;
struct btrfs_path *left_path = NULL;
struct btrfs_path *right_path = NULL;
struct btrfs_key left_key;
u64 right_blockptr;
u64 left_gen;
u64 right_gen;
- u64 left_start_ctransid;
- u64 right_start_ctransid;
- u64 ctransid;
left_path = btrfs_alloc_path();
if (!left_path) {
right_path->search_commit_root = 1;
right_path->skip_locking = 1;
- spin_lock(&left_root->root_item_lock);
- left_start_ctransid = btrfs_root_ctransid(&left_root->root_item);
- spin_unlock(&left_root->root_item_lock);
-
- spin_lock(&right_root->root_item_lock);
- right_start_ctransid = btrfs_root_ctransid(&right_root->root_item);
- spin_unlock(&right_root->root_item_lock);
-
- trans = btrfs_join_transaction(left_root);
- if (IS_ERR(trans)) {
- ret = PTR_ERR(trans);
- trans = NULL;
- goto out;
- }
-
/*
* Strategy: Go to the first items of both trees. Then do
*
* the right if possible or go up and right.
*/
+ down_read(&left_root->fs_info->commit_root_sem);
left_level = btrfs_header_level(left_root->commit_root);
left_root_level = left_level;
left_path->nodes[left_level] = left_root->commit_root;
right_root_level = right_level;
right_path->nodes[right_level] = right_root->commit_root;
extent_buffer_get(right_path->nodes[right_level]);
+ up_read(&left_root->fs_info->commit_root_sem);
if (left_level == 0)
btrfs_item_key_to_cpu(left_path->nodes[left_level],
advance_left = advance_right = 0;
while (1) {
- /*
- * We need to make sure the transaction does not get committed
- * while we do anything on commit roots. This means, we need to
- * join and leave transactions for every item that we process.
- */
- if (trans && btrfs_should_end_transaction(trans, left_root)) {
- btrfs_release_path(left_path);
- btrfs_release_path(right_path);
-
- ret = btrfs_end_transaction(trans, left_root);
- trans = NULL;
- if (ret < 0)
- goto out;
- }
- /* now rejoin the transaction */
- if (!trans) {
- trans = btrfs_join_transaction(left_root);
- if (IS_ERR(trans)) {
- ret = PTR_ERR(trans);
- trans = NULL;
- goto out;
- }
-
- spin_lock(&left_root->root_item_lock);
- ctransid = btrfs_root_ctransid(&left_root->root_item);
- spin_unlock(&left_root->root_item_lock);
- if (ctransid != left_start_ctransid)
- left_start_ctransid = 0;
-
- spin_lock(&right_root->root_item_lock);
- ctransid = btrfs_root_ctransid(&right_root->root_item);
- spin_unlock(&right_root->root_item_lock);
- if (ctransid != right_start_ctransid)
- right_start_ctransid = 0;
-
- if (!left_start_ctransid || !right_start_ctransid) {
- WARN(1, KERN_WARNING
- "BTRFS: btrfs_compare_tree detected "
- "a change in one of the trees while "
- "iterating. This is probably a "
- "bug.\n");
- ret = -EIO;
- goto out;
- }
-
- /*
- * the commit root may have changed, so start again
- * where we stopped
- */
- left_path->lowest_level = left_level;
- right_path->lowest_level = right_level;
- ret = btrfs_search_slot(NULL, left_root,
- &left_key, left_path, 0, 0);
- if (ret < 0)
- goto out;
- ret = btrfs_search_slot(NULL, right_root,
- &right_key, right_path, 0, 0);
- if (ret < 0)
- goto out;
- }
-
if (advance_left && !left_end_reached) {
ret = tree_advance(left_root, left_path, &left_level,
left_root_level,
btrfs_free_path(left_path);
btrfs_free_path(right_path);
kfree(tmp_buf);
-
- if (trans) {
- if (!ret)
- ret = btrfs_end_transaction(trans, left_root);
- else
- btrfs_end_transaction(trans, left_root);
- }
-
return ret;
}
unsigned int skip_locking:1;
unsigned int leave_spinning:1;
unsigned int search_commit_root:1;
+ unsigned int need_commit_sem:1;
};
/*
#define BTRFS_BLOCK_GROUP_RAID10 (1ULL << 6)
#define BTRFS_BLOCK_GROUP_RAID5 (1ULL << 7)
#define BTRFS_BLOCK_GROUP_RAID6 (1ULL << 8)
-#define BTRFS_BLOCK_GROUP_RESERVED BTRFS_AVAIL_ALLOC_BIT_SINGLE
+#define BTRFS_BLOCK_GROUP_RESERVED (BTRFS_AVAIL_ALLOC_BIT_SINGLE | \
+ BTRFS_SPACE_INFO_GLOBAL_RSV)
enum btrfs_raid_types {
BTRFS_RAID_RAID10,
*/
#define BTRFS_AVAIL_ALLOC_BIT_SINGLE (1ULL << 48)
+/*
+ * A fake block group type that is used to communicate global block reserve
+ * size to userspace via the SPACE_INFO ioctl.
+ */
+#define BTRFS_SPACE_INFO_GLOBAL_RSV (1ULL << 49)
+
#define BTRFS_EXTENDED_PROFILE_MASK (BTRFS_BLOCK_GROUP_PROFILE_MASK | \
BTRFS_AVAIL_ALLOC_BIT_SINGLE)
*/
struct mutex ordered_extent_flush_mutex;
- struct rw_semaphore extent_commit_sem;
+ struct rw_semaphore commit_root_sem;
struct rw_semaphore cleanup_work_sem;
struct btrfs_block_rsv *block_rsv;
/* free ino cache stuff */
- struct mutex fs_commit_mutex;
struct btrfs_free_space_ctl *free_ino_ctl;
enum btrfs_caching_type cached;
spinlock_t cache_lock;
{
struct extent_state *cached_state = NULL;
int ret;
+ bool need_lock = (current->journal_info ==
+ (void *)BTRFS_SEND_TRANS_STUB);
if (!parent_transid || btrfs_header_generation(eb) == parent_transid)
return 0;
if (atomic)
return -EAGAIN;
+ if (need_lock) {
+ btrfs_tree_read_lock(eb);
+ btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK);
+ }
+
lock_extent_bits(io_tree, eb->start, eb->start + eb->len - 1,
0, &cached_state);
if (extent_buffer_uptodate(eb) &&
"found %llu\n",
eb->start, parent_transid, btrfs_header_generation(eb));
ret = 1;
- clear_extent_buffer_uptodate(eb);
+
+ /*
+ * Things reading via commit roots that don't have normal protection,
+ * like send, can have a really old block in cache that may point at a
+ * block that has been free'd and re-allocated. So don't clear uptodate
+ * if we find an eb that is under IO (dirty/writeback) because we could
+ * end up reading in the stale data and then writing it back out and
+ * making everybody very sad.
+ */
+ if (!extent_buffer_under_io(eb))
+ clear_extent_buffer_uptodate(eb);
out:
unlock_extent_cached(io_tree, eb->start, eb->start + eb->len - 1,
&cached_state, GFP_NOFS);
+ btrfs_tree_read_unlock_blocking(eb);
return ret;
}
root->subv_writers = writers;
btrfs_init_free_ino_ctl(root);
- mutex_init(&root->fs_commit_mutex);
spin_lock_init(&root->cache_lock);
init_waitqueue_head(&root->cache_wait);
mutex_init(&fs_info->transaction_kthread_mutex);
mutex_init(&fs_info->cleaner_mutex);
mutex_init(&fs_info->volume_mutex);
- init_rwsem(&fs_info->extent_commit_sem);
+ init_rwsem(&fs_info->commit_root_sem);
init_rwsem(&fs_info->cleanup_work_sem);
init_rwsem(&fs_info->subvol_sem);
sema_init(&fs_info->uuid_tree_rescan_sem, 1);
again:
mutex_lock(&caching_ctl->mutex);
/* need to make sure the commit_root doesn't disappear */
- down_read(&fs_info->extent_commit_sem);
+ down_read(&fs_info->commit_root_sem);
next:
ret = btrfs_search_slot(NULL, extent_root, &key, path, 0, 0);
break;
if (need_resched() ||
- rwsem_is_contended(&fs_info->extent_commit_sem)) {
+ rwsem_is_contended(&fs_info->commit_root_sem)) {
caching_ctl->progress = last;
btrfs_release_path(path);
- up_read(&fs_info->extent_commit_sem);
+ up_read(&fs_info->commit_root_sem);
mutex_unlock(&caching_ctl->mutex);
cond_resched();
goto again;
err:
btrfs_free_path(path);
- up_read(&fs_info->extent_commit_sem);
+ up_read(&fs_info->commit_root_sem);
free_excluded_extents(extent_root, block_group);
return 0;
}
- down_write(&fs_info->extent_commit_sem);
+ down_write(&fs_info->commit_root_sem);
atomic_inc(&caching_ctl->count);
list_add_tail(&caching_ctl->list, &fs_info->caching_block_groups);
- up_write(&fs_info->extent_commit_sem);
+ up_write(&fs_info->commit_root_sem);
btrfs_get_block_group(cache);
spin_unlock(&locked_ref->lock);
spin_lock(&delayed_refs->lock);
spin_lock(&locked_ref->lock);
- if (rb_first(&locked_ref->ref_root)) {
+ if (rb_first(&locked_ref->ref_root) ||
+ locked_ref->extent_op) {
spin_unlock(&locked_ref->lock);
spin_unlock(&delayed_refs->lock);
continue;
struct btrfs_block_group_cache *cache;
struct btrfs_space_info *space_info;
- down_write(&fs_info->extent_commit_sem);
+ down_write(&fs_info->commit_root_sem);
list_for_each_entry_safe(caching_ctl, next,
&fs_info->caching_block_groups, list) {
else
fs_info->pinned_extents = &fs_info->freed_extents[0];
- up_write(&fs_info->extent_commit_sem);
+ up_write(&fs_info->commit_root_sem);
list_for_each_entry_rcu(space_info, &fs_info->space_info, list)
percpu_counter_set(&space_info->total_bytes_pinned, 0);
"unable to find ref byte nr %llu parent %llu root %llu owner %llu offset %llu",
bytenr, parent, root_objectid, owner_objectid,
owner_offset);
+ btrfs_abort_transaction(trans, extent_root, ret);
+ goto out;
} else {
btrfs_abort_transaction(trans, extent_root, ret);
goto out;
struct btrfs_caching_control *caching_ctl;
struct rb_node *n;
- down_write(&info->extent_commit_sem);
+ down_write(&info->commit_root_sem);
while (!list_empty(&info->caching_block_groups)) {
caching_ctl = list_entry(info->caching_block_groups.next,
struct btrfs_caching_control, list);
list_del(&caching_ctl->list);
put_caching_control(caching_ctl);
}
- up_write(&info->extent_commit_sem);
+ up_write(&info->commit_root_sem);
spin_lock(&info->block_group_cache_lock);
while ((n = rb_last(&info->block_group_cache_tree)) != NULL) {
struct btrfs_block_group_cache *cache)
{
int index = get_block_group_index(cache);
+ bool first = false;
down_write(&space_info->groups_sem);
- if (list_empty(&space_info->block_groups[index])) {
+ if (list_empty(&space_info->block_groups[index]))
+ first = true;
+ list_add_tail(&cache->list, &space_info->block_groups[index]);
+ up_write(&space_info->groups_sem);
+
+ if (first) {
struct kobject *kobj = &space_info->block_group_kobjs[index];
int ret;
kobject_put(&space_info->kobj);
}
}
- list_add_tail(&cache->list, &space_info->block_groups[index]);
- up_write(&space_info->groups_sem);
}
static struct btrfs_block_group_cache *
* our range starts
*/
node = tree_search(tree, start);
+process_node:
if (!node)
break;
if (start > end)
break;
- cond_resched_lock(&tree->lock);
+ if (!cond_resched_lock(&tree->lock)) {
+ node = rb_next(node);
+ goto process_node;
+ }
}
out:
spin_unlock(&tree->lock);
kmem_cache_free(extent_buffer_cache, eb);
}
-static int extent_buffer_under_io(struct extent_buffer *eb)
+int extent_buffer_under_io(struct extent_buffer *eb)
{
return (atomic_read(&eb->io_pages) ||
test_bit(EXTENT_BUFFER_WRITEBACK, &eb->bflags) ||
int set_extent_buffer_uptodate(struct extent_buffer *eb);
int clear_extent_buffer_uptodate(struct extent_buffer *eb);
int extent_buffer_uptodate(struct extent_buffer *eb);
+int extent_buffer_under_io(struct extent_buffer *eb);
int map_private_extent_buffer(struct extent_buffer *eb, unsigned long offset,
unsigned long min_len, char **map,
unsigned long *map_start,
struct page *page = prepared_pages[pg];
/*
* Copy data from userspace to the current page
- *
- * Disable pagefault to avoid recursive lock since
- * the pages are already locked
*/
- pagefault_disable();
copied = iov_iter_copy_from_user_atomic(page, i, offset, count);
- pagefault_enable();
/* Flush processor's dcache for this page */
flush_dcache_page(page);
static ssize_t __btrfs_direct_write(struct kiocb *iocb,
const struct iovec *iov,
unsigned long nr_segs, loff_t pos,
- loff_t *ppos, size_t count, size_t ocount)
+ size_t count, size_t ocount)
{
struct file *file = iocb->ki_filp;
struct iov_iter i;
loff_t endbyte;
int err;
- written = generic_file_direct_write(iocb, iov, &nr_segs, pos, ppos,
+ written = generic_file_direct_write(iocb, iov, &nr_segs, pos,
count, ocount);
if (written < 0 || written == count)
if (err)
goto out;
written += written_buffered;
- *ppos = pos + written_buffered;
+ iocb->ki_pos = pos + written_buffered;
invalidate_mapping_pages(file->f_mapping, pos >> PAGE_CACHE_SHIFT,
endbyte >> PAGE_CACHE_SHIFT);
out:
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct btrfs_root *root = BTRFS_I(inode)->root;
- loff_t *ppos = &iocb->ki_pos;
u64 start_pos;
+ u64 end_pos;
ssize_t num_written = 0;
ssize_t err = 0;
size_t count, ocount;
start_pos = round_down(pos, root->sectorsize);
if (start_pos > i_size_read(inode)) {
- err = btrfs_cont_expand(inode, i_size_read(inode), start_pos);
+ /* Expand hole size to cover write data, preventing empty gap */
+ end_pos = round_up(pos + iov->iov_len, root->sectorsize);
+ err = btrfs_cont_expand(inode, i_size_read(inode), end_pos);
if (err) {
mutex_unlock(&inode->i_mutex);
goto out;
if (unlikely(file->f_flags & O_DIRECT)) {
num_written = __btrfs_direct_write(iocb, iov, nr_segs,
- pos, ppos, count, ocount);
+ pos, count, ocount);
} else {
struct iov_iter i;
num_written = __btrfs_buffered_write(file, &i, pos);
if (num_written > 0)
- *ppos = pos + num_written;
+ iocb->ki_pos = pos + num_written;
}
mutex_unlock(&inode->i_mutex);
key.type = BTRFS_INODE_ITEM_KEY;
again:
/* need to make sure the commit_root doesn't disappear */
- mutex_lock(&root->fs_commit_mutex);
+ down_read(&fs_info->commit_root_sem);
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
btrfs_item_key_to_cpu(leaf, &key, 0);
btrfs_release_path(path);
root->cache_progress = last;
- mutex_unlock(&root->fs_commit_mutex);
+ up_read(&fs_info->commit_root_sem);
schedule_timeout(1);
goto again;
} else
btrfs_unpin_free_ino(root);
out:
wake_up(&root->cache_wait);
- mutex_unlock(&root->fs_commit_mutex);
+ up_read(&fs_info->commit_root_sem);
btrfs_free_path(path);
* or the caching work is done.
*/
- mutex_lock(&root->fs_commit_mutex);
+ down_write(&root->fs_info->commit_root_sem);
spin_lock(&root->cache_lock);
if (root->cached == BTRFS_CACHE_FINISHED) {
spin_unlock(&root->cache_lock);
- mutex_unlock(&root->fs_commit_mutex);
+ up_write(&root->fs_info->commit_root_sem);
goto again;
}
spin_unlock(&root->cache_lock);
else
__btrfs_add_free_space(pinned, objectid, 1);
- mutex_unlock(&root->fs_commit_mutex);
+ up_write(&root->fs_info->commit_root_sem);
}
}
* and others will just be dropped, because the commit root we were
* searching has changed.
*
- * Must be called with root->fs_commit_mutex held
+ * Must be called with root->fs_info->commit_root_sem held
*/
void btrfs_unpin_free_ino(struct btrfs_root *root)
{
(start > 0 || end + 1 < BTRFS_I(inode)->disk_i_size))
btrfs_add_inode_defrag(NULL, inode);
+ /*
+ * skip compression for a small file range(<=blocksize) that
+ * isn't an inline extent, since it dosen't save disk space at all.
+ */
+ if ((end - start + 1) <= blocksize &&
+ (start > 0 || end + 1 < BTRFS_I(inode)->disk_i_size))
+ goto cleanup_and_bail_uncompressed;
+
actual_end = min_t(u64, isize, end + 1);
again:
will_compress = 0;
disk_bytenr += extent_offset;
disk_bytenr += cur_offset - found_key.offset;
num_bytes = min(end + 1, extent_end) - cur_offset;
+ /*
+ * if there are pending snapshots for this root,
+ * we fall into common COW way.
+ */
+ if (!nolock) {
+ err = btrfs_start_nocow_write(root);
+ if (!err)
+ goto out_check;
+ }
/*
* force cow if csum exists in the range.
* this ensure that csum for a given extent are
out_check:
if (extent_end <= start) {
path->slots[0]++;
+ if (!nolock && nocow)
+ btrfs_end_nocow_write(root);
goto next_slot;
}
if (!nocow) {
ret = cow_file_range(inode, locked_page,
cow_start, found_key.offset - 1,
page_started, nr_written, 1);
- if (ret)
+ if (ret) {
+ if (!nolock && nocow)
+ btrfs_end_nocow_write(root);
goto error;
+ }
cow_start = (u64)-1;
}
BTRFS_DATA_RELOC_TREE_OBJECTID) {
ret = btrfs_reloc_clone_csums(inode, cur_offset,
num_bytes);
- if (ret)
+ if (ret) {
+ if (!nolock && nocow)
+ btrfs_end_nocow_write(root);
goto error;
+ }
}
extent_clear_unlock_delalloc(inode, cur_offset,
locked_page, EXTENT_LOCKED |
EXTENT_DELALLOC, PAGE_UNLOCK |
PAGE_SET_PRIVATE2);
+ if (!nolock && nocow)
+ btrfs_end_nocow_write(root);
cur_offset = extent_end;
if (cur_offset > end)
break;
else
iput(inode);
ret = -ENOMEM;
- break;
+ goto out;
}
list_add_tail(&work->list, &works);
btrfs_queue_work(root->fs_info->flush_workers,
&work->work);
ret++;
if (nr != -1 && ret >= nr)
- break;
+ goto out;
cond_resched();
spin_lock(&root->delalloc_lock);
}
spin_unlock(&root->delalloc_lock);
+out:
list_for_each_entry_safe(work, next, &works, list) {
list_del_init(&work->list);
btrfs_wait_and_free_delalloc_work(work);
struct btrfs_trans_handle *trans;
struct btrfs_device *device = NULL;
char *sizestr;
+ char *retptr;
char *devstr = NULL;
int ret = 0;
int mod = 0;
mod = 1;
sizestr++;
}
- new_size = memparse(sizestr, NULL);
- if (new_size == 0) {
+ new_size = memparse(sizestr, &retptr);
+ if (*retptr != '\0' || new_size == 0) {
ret = -EINVAL;
goto out_free;
}
new_key.offset + datal,
1);
if (ret) {
- btrfs_abort_transaction(trans, root,
- ret);
+ if (ret != -EINVAL)
+ btrfs_abort_transaction(trans,
+ root, ret);
btrfs_end_transaction(trans, root);
goto out;
}
up_read(&info->groups_sem);
}
+ /*
+ * Global block reserve, exported as a space_info
+ */
+ slot_count++;
+
/* space_slots == 0 means they are asking for a count */
if (space_args.space_slots == 0) {
space_args.total_spaces = slot_count;
up_read(&info->groups_sem);
}
+ /*
+ * Add global block reserve
+ */
+ if (slot_count) {
+ struct btrfs_block_rsv *block_rsv = &root->fs_info->global_block_rsv;
+
+ spin_lock(&block_rsv->lock);
+ space.total_bytes = block_rsv->size;
+ space.used_bytes = block_rsv->size - block_rsv->reserved;
+ spin_unlock(&block_rsv->lock);
+ space.flags = BTRFS_SPACE_INFO_GLOBAL_RSV;
+ memcpy(dest, &space, sizeof(space));
+ space_args.total_spaces++;
+ }
+
user_dest = (struct btrfs_ioctl_space_info __user *)
(arg + sizeof(struct btrfs_ioctl_space_args));
}
args64 = kmalloc(sizeof(*args64), GFP_NOFS);
- if (IS_ERR(args64)) {
- ret = PTR_ERR(args64);
- args64 = NULL;
+ if (!args64) {
+ ret = -ENOMEM;
goto out;
}
static noinline_for_stack
int merge_reloc_roots(struct reloc_control *rc)
{
- struct btrfs_trans_handle *trans;
struct btrfs_root *root;
struct btrfs_root *reloc_root;
u64 last_snap;
list_add_tail(&reloc_root->root_list,
&reloc_roots);
goto out;
- } else if (!ret) {
- /*
- * recover the last snapshot tranid to avoid
- * the space balance break NOCOW.
- */
- root = read_fs_root(rc->extent_root->fs_info,
- objectid);
- if (IS_ERR(root))
- continue;
-
- trans = btrfs_join_transaction(root);
- BUG_ON(IS_ERR(trans));
-
- /* Check if the fs/file tree was snapshoted or not. */
- if (btrfs_root_last_snapshot(&root->root_item) ==
- otransid - 1)
- btrfs_set_root_last_snapshot(&root->root_item,
- last_snap);
-
- btrfs_end_transaction(trans, root);
}
}
return 0;
}
+/*
+ * Given a physical address, this will calculate it's
+ * logical offset. if this is a parity stripe, it will return
+ * the most left data stripe's logical offset.
+ *
+ * return 0 if it is a data stripe, 1 means parity stripe.
+ */
+static int get_raid56_logic_offset(u64 physical, int num,
+ struct map_lookup *map, u64 *offset)
+{
+ int i;
+ int j = 0;
+ u64 stripe_nr;
+ u64 last_offset;
+ int stripe_index;
+ int rot;
+
+ last_offset = (physical - map->stripes[num].physical) *
+ nr_data_stripes(map);
+ *offset = last_offset;
+ for (i = 0; i < nr_data_stripes(map); i++) {
+ *offset = last_offset + i * map->stripe_len;
+
+ stripe_nr = *offset;
+ do_div(stripe_nr, map->stripe_len);
+ do_div(stripe_nr, nr_data_stripes(map));
+
+ /* Work out the disk rotation on this stripe-set */
+ rot = do_div(stripe_nr, map->num_stripes);
+ /* calculate which stripe this data locates */
+ rot += i;
+ stripe_index = rot % map->num_stripes;
+ if (stripe_index == num)
+ return 0;
+ if (stripe_index < num)
+ j++;
+ }
+ *offset = last_offset + j * map->stripe_len;
+ return 1;
+}
+
static noinline_for_stack int scrub_stripe(struct scrub_ctx *sctx,
struct map_lookup *map,
struct btrfs_device *scrub_dev,
u64 physical;
u64 logical;
u64 logic_end;
+ u64 physical_end;
u64 generation;
int mirror_num;
struct reada_control *reada1;
u64 extent_len;
struct btrfs_device *extent_dev;
int extent_mirror_num;
- int stop_loop;
-
- if (map->type & (BTRFS_BLOCK_GROUP_RAID5 |
- BTRFS_BLOCK_GROUP_RAID6)) {
- if (num >= nr_data_stripes(map)) {
- return 0;
- }
- }
+ int stop_loop = 0;
nstripes = length;
+ physical = map->stripes[num].physical;
offset = 0;
do_div(nstripes, map->stripe_len);
if (map->type & BTRFS_BLOCK_GROUP_RAID0) {
} else if (map->type & BTRFS_BLOCK_GROUP_DUP) {
increment = map->stripe_len;
mirror_num = num % map->num_stripes + 1;
+ } else if (map->type & (BTRFS_BLOCK_GROUP_RAID5 |
+ BTRFS_BLOCK_GROUP_RAID6)) {
+ get_raid56_logic_offset(physical, num, map, &offset);
+ increment = map->stripe_len * nr_data_stripes(map);
+ mirror_num = 1;
} else {
increment = map->stripe_len;
mirror_num = 1;
* to not hold off transaction commits
*/
logical = base + offset;
-
+ physical_end = physical + nstripes * map->stripe_len;
+ if (map->type & (BTRFS_BLOCK_GROUP_RAID5 |
+ BTRFS_BLOCK_GROUP_RAID6)) {
+ get_raid56_logic_offset(physical_end, num,
+ map, &logic_end);
+ logic_end += base;
+ } else {
+ logic_end = logical + increment * nstripes;
+ }
wait_event(sctx->list_wait,
atomic_read(&sctx->bios_in_flight) == 0);
scrub_blocked_if_needed(fs_info);
key_start.objectid = logical;
key_start.type = BTRFS_EXTENT_ITEM_KEY;
key_start.offset = (u64)0;
- key_end.objectid = base + offset + nstripes * increment;
+ key_end.objectid = logic_end;
key_end.type = BTRFS_METADATA_ITEM_KEY;
key_end.offset = (u64)-1;
reada1 = btrfs_reada_add(root, &key_start, &key_end);
key_start.offset = logical;
key_end.objectid = BTRFS_EXTENT_CSUM_OBJECTID;
key_end.type = BTRFS_EXTENT_CSUM_KEY;
- key_end.offset = base + offset + nstripes * increment;
+ key_end.offset = logic_end;
reada2 = btrfs_reada_add(csum_root, &key_start, &key_end);
if (!IS_ERR(reada1))
/*
* now find all extents for each stripe and scrub them
*/
- logical = base + offset;
- physical = map->stripes[num].physical;
- logic_end = logical + increment * nstripes;
ret = 0;
- while (logical < logic_end) {
+ while (physical < physical_end) {
+ /* for raid56, we skip parity stripe */
+ if (map->type & (BTRFS_BLOCK_GROUP_RAID5 |
+ BTRFS_BLOCK_GROUP_RAID6)) {
+ ret = get_raid56_logic_offset(physical, num,
+ map, &logical);
+ logical += base;
+ if (ret)
+ goto skip;
+ }
/*
* canceled?
*/
scrub_free_csums(sctx);
if (extent_logical + extent_len <
key.objectid + bytes) {
- logical += increment;
- physical += map->stripe_len;
-
+ if (map->type & (BTRFS_BLOCK_GROUP_RAID5 |
+ BTRFS_BLOCK_GROUP_RAID6)) {
+ /*
+ * loop until we find next data stripe
+ * or we have finished all stripes.
+ */
+ do {
+ physical += map->stripe_len;
+ ret = get_raid56_logic_offset(
+ physical, num,
+ map, &logical);
+ logical += base;
+ } while (physical < physical_end && ret);
+ } else {
+ physical += map->stripe_len;
+ logical += increment;
+ }
if (logical < key.objectid + bytes) {
cond_resched();
goto again;
}
- if (logical >= logic_end) {
+ if (physical >= physical_end) {
stop_loop = 1;
break;
}
path->slots[0]++;
}
btrfs_release_path(path);
+skip:
logical += increment;
physical += map->stripe_len;
spin_lock(&sctx->stat_lock);
return NULL;
path->search_commit_root = 1;
path->skip_locking = 1;
+ path->need_commit_sem = 1;
return path;
}
/*
* Helper function to retrieve some fields from an inode item.
*/
-static int get_inode_info(struct btrfs_root *root,
- u64 ino, u64 *size, u64 *gen,
- u64 *mode, u64 *uid, u64 *gid,
- u64 *rdev)
+static int __get_inode_info(struct btrfs_root *root, struct btrfs_path *path,
+ u64 ino, u64 *size, u64 *gen, u64 *mode, u64 *uid,
+ u64 *gid, u64 *rdev)
{
int ret;
struct btrfs_inode_item *ii;
struct btrfs_key key;
- struct btrfs_path *path;
-
- path = alloc_path_for_send();
- if (!path)
- return -ENOMEM;
key.objectid = ino;
key.type = BTRFS_INODE_ITEM_KEY;
key.offset = 0;
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
- if (ret < 0)
- goto out;
if (ret) {
- ret = -ENOENT;
- goto out;
+ if (ret > 0)
+ ret = -ENOENT;
+ return ret;
}
ii = btrfs_item_ptr(path->nodes[0], path->slots[0],
if (rdev)
*rdev = btrfs_inode_rdev(path->nodes[0], ii);
-out:
+ return ret;
+}
+
+static int get_inode_info(struct btrfs_root *root,
+ u64 ino, u64 *size, u64 *gen,
+ u64 *mode, u64 *uid, u64 *gid,
+ u64 *rdev)
+{
+ struct btrfs_path *path;
+ int ret;
+
+ path = alloc_path_for_send();
+ if (!path)
+ return -ENOMEM;
+ ret = __get_inode_info(root, path, ino, size, gen, mode, uid, gid,
+ rdev);
btrfs_free_path(path);
return ret;
}
struct backref_ctx {
struct send_ctx *sctx;
+ struct btrfs_path *path;
/* number of total found references */
u64 found;
* There are inodes that have extents that lie behind its i_size. Don't
* accept clones from these extents.
*/
- ret = get_inode_info(found->root, ino, &i_size, NULL, NULL, NULL, NULL,
- NULL);
+ ret = __get_inode_info(found->root, bctx->path, ino, &i_size, NULL, NULL,
+ NULL, NULL, NULL);
+ btrfs_release_path(bctx->path);
if (ret < 0)
return ret;
if (!tmp_path)
return -ENOMEM;
+ /* We only use this path under the commit sem */
+ tmp_path->need_commit_sem = 0;
+
backref_ctx = kmalloc(sizeof(*backref_ctx), GFP_NOFS);
if (!backref_ctx) {
ret = -ENOMEM;
goto out;
}
+ backref_ctx->path = tmp_path;
+
if (data_offset >= ino_size) {
/*
* There may be extents that lie behind the file's size.
}
logical = disk_byte + btrfs_file_extent_offset(eb, fi);
+ down_read(&sctx->send_root->fs_info->commit_root_sem);
ret = extent_from_logical(sctx->send_root->fs_info, disk_byte, tmp_path,
&found_key, &flags);
+ up_read(&sctx->send_root->fs_info->commit_root_sem);
btrfs_release_path(tmp_path);
if (ret < 0)
p = fs_path_alloc();
if (!p)
return -ENOMEM;
+ ret = get_cur_path(sctx, sctx->cur_ino, sctx->cur_inode_gen, p);
+ if (ret < 0)
+ goto tlv_put_failure;
memset(sctx->read_buf, 0, BTRFS_SEND_READ_SIZE);
while (offset < end) {
len = min_t(u64, end - offset, BTRFS_SEND_READ_SIZE);
ret = begin_cmd(sctx, BTRFS_SEND_C_WRITE);
- if (ret < 0)
- break;
- ret = get_cur_path(sctx, sctx->cur_ino, sctx->cur_inode_gen, p);
if (ret < 0)
break;
TLV_PUT_PATH(sctx, BTRFS_SEND_A_PATH, p);
if (S_ISREG(sctx->cur_inode_mode)) {
if (need_send_hole(sctx)) {
- if (sctx->cur_inode_last_extent == (u64)-1) {
+ if (sctx->cur_inode_last_extent == (u64)-1 ||
+ sctx->cur_inode_last_extent <
+ sctx->cur_inode_size) {
ret = get_last_extent(sctx, (u64)-1);
if (ret)
goto out;
static int full_send_tree(struct send_ctx *sctx)
{
int ret;
- struct btrfs_trans_handle *trans = NULL;
struct btrfs_root *send_root = sctx->send_root;
struct btrfs_key key;
struct btrfs_key found_key;
struct btrfs_path *path;
struct extent_buffer *eb;
int slot;
- u64 start_ctransid;
- u64 ctransid;
path = alloc_path_for_send();
if (!path)
return -ENOMEM;
- spin_lock(&send_root->root_item_lock);
- start_ctransid = btrfs_root_ctransid(&send_root->root_item);
- spin_unlock(&send_root->root_item_lock);
-
key.objectid = BTRFS_FIRST_FREE_OBJECTID;
key.type = BTRFS_INODE_ITEM_KEY;
key.offset = 0;
-join_trans:
- /*
- * We need to make sure the transaction does not get committed
- * while we do anything on commit roots. Join a transaction to prevent
- * this.
- */
- trans = btrfs_join_transaction(send_root);
- if (IS_ERR(trans)) {
- ret = PTR_ERR(trans);
- trans = NULL;
- goto out;
- }
-
- /*
- * Make sure the tree has not changed after re-joining. We detect this
- * by comparing start_ctransid and ctransid. They should always match.
- */
- spin_lock(&send_root->root_item_lock);
- ctransid = btrfs_root_ctransid(&send_root->root_item);
- spin_unlock(&send_root->root_item_lock);
-
- if (ctransid != start_ctransid) {
- WARN(1, KERN_WARNING "BTRFS: the root that you're trying to "
- "send was modified in between. This is "
- "probably a bug.\n");
- ret = -EIO;
- goto out;
- }
-
ret = btrfs_search_slot_for_read(send_root, &key, path, 1, 0);
if (ret < 0)
goto out;
goto out_finish;
while (1) {
- /*
- * When someone want to commit while we iterate, end the
- * joined transaction and rejoin.
- */
- if (btrfs_should_end_transaction(trans, send_root)) {
- ret = btrfs_end_transaction(trans, send_root);
- trans = NULL;
- if (ret < 0)
- goto out;
- btrfs_release_path(path);
- goto join_trans;
- }
-
eb = path->nodes[0];
slot = path->slots[0];
btrfs_item_key_to_cpu(eb, &found_key, slot);
out:
btrfs_free_path(path);
- if (trans) {
- if (!ret)
- ret = btrfs_end_transaction(trans, send_root);
- else
- btrfs_end_transaction(trans, send_root);
- }
return ret;
}
NULL);
sort_clone_roots = 1;
+ current->journal_info = (void *)BTRFS_SEND_TRANS_STUB;
ret = send_subvol(sctx);
+ current->journal_info = NULL;
if (ret < 0)
goto out;
static const struct super_operations btrfs_super_ops;
static struct file_system_type btrfs_fs_type;
+static int btrfs_remount(struct super_block *sb, int *flags, char *data);
+
static const char *btrfs_decode_error(int errno)
{
char *errstr = "unknown";
mnt = vfs_kern_mount(&btrfs_fs_type, flags, device_name,
newargs);
kfree(newargs);
+
+ if (PTR_RET(mnt) == -EBUSY) {
+ if (flags & MS_RDONLY) {
+ mnt = vfs_kern_mount(&btrfs_fs_type, flags & ~MS_RDONLY, device_name,
+ newargs);
+ } else {
+ int r;
+ mnt = vfs_kern_mount(&btrfs_fs_type, flags | MS_RDONLY, device_name,
+ newargs);
+ if (IS_ERR(mnt))
+ return ERR_CAST(mnt);
+
+ r = btrfs_remount(mnt->mnt_sb, &flags, NULL);
+ if (r < 0) {
+ /* FIXME: release vfsmount mnt ??*/
+ return ERR_PTR(r);
+ }
+ }
+ }
+
if (IS_ERR(mnt))
return ERR_CAST(mnt);
}
}
-static noinline void switch_commit_root(struct btrfs_root *root)
+static noinline void switch_commit_roots(struct btrfs_transaction *trans,
+ struct btrfs_fs_info *fs_info)
{
- free_extent_buffer(root->commit_root);
- root->commit_root = btrfs_root_node(root);
+ struct btrfs_root *root, *tmp;
+
+ down_write(&fs_info->commit_root_sem);
+ list_for_each_entry_safe(root, tmp, &trans->switch_commits,
+ dirty_list) {
+ list_del_init(&root->dirty_list);
+ free_extent_buffer(root->commit_root);
+ root->commit_root = btrfs_root_node(root);
+ if (is_fstree(root->objectid))
+ btrfs_unpin_free_ino(root);
+ }
+ up_write(&fs_info->commit_root_sem);
}
static inline void extwriter_counter_inc(struct btrfs_transaction *trans,
INIT_LIST_HEAD(&cur_trans->pending_snapshots);
INIT_LIST_HEAD(&cur_trans->ordered_operations);
INIT_LIST_HEAD(&cur_trans->pending_chunks);
+ INIT_LIST_HEAD(&cur_trans->switch_commits);
list_add_tail(&cur_trans->list, &fs_info->trans_list);
extent_io_tree_init(&cur_trans->dirty_pages,
fs_info->btree_inode->i_mapping);
if (test_bit(BTRFS_FS_STATE_ERROR, &root->fs_info->fs_state))
return ERR_PTR(-EROFS);
- if (current->journal_info) {
+ if (current->journal_info &&
+ current->journal_info != (void *)BTRFS_SEND_TRANS_STUB) {
WARN_ON(type & TRANS_EXTWRITERS);
h = current->journal_info;
h->use_count++;
return ret;
}
- if (root != root->fs_info->extent_root)
- switch_commit_root(root);
-
return 0;
}
list_del_init(next);
root = list_entry(next, struct btrfs_root, dirty_list);
+ if (root != fs_info->extent_root)
+ list_add_tail(&root->dirty_list,
+ &trans->transaction->switch_commits);
ret = update_cowonly_root(trans, root);
if (ret)
return ret;
}
- down_write(&fs_info->extent_commit_sem);
- switch_commit_root(fs_info->extent_root);
- up_write(&fs_info->extent_commit_sem);
-
+ list_add_tail(&fs_info->extent_root->dirty_list,
+ &trans->transaction->switch_commits);
btrfs_after_dev_replace_commit(fs_info);
return 0;
smp_wmb();
if (root->commit_root != root->node) {
- mutex_lock(&root->fs_commit_mutex);
- switch_commit_root(root);
- btrfs_unpin_free_ino(root);
- mutex_unlock(&root->fs_commit_mutex);
-
+ list_add_tail(&root->dirty_list,
+ &trans->transaction->switch_commits);
btrfs_set_root_node(&root->root_item,
root->node);
}
btrfs_set_root_node(&root->fs_info->tree_root->root_item,
root->fs_info->tree_root->node);
- switch_commit_root(root->fs_info->tree_root);
+ list_add_tail(&root->fs_info->tree_root->dirty_list,
+ &cur_trans->switch_commits);
btrfs_set_root_node(&root->fs_info->chunk_root->root_item,
root->fs_info->chunk_root->node);
- switch_commit_root(root->fs_info->chunk_root);
+ list_add_tail(&root->fs_info->chunk_root->dirty_list,
+ &cur_trans->switch_commits);
+
+ switch_commit_roots(cur_trans, root->fs_info);
assert_qgroups_uptodate(trans);
update_super_roots(root);
struct list_head pending_snapshots;
struct list_head ordered_operations;
struct list_head pending_chunks;
+ struct list_head switch_commits;
struct btrfs_delayed_ref_root delayed_refs;
int aborted;
};
#define TRANS_EXTWRITERS (__TRANS_USERSPACE | __TRANS_START | \
__TRANS_ATTACH)
+#define BTRFS_SEND_TRANS_STUB 1
+
struct btrfs_trans_handle {
u64 transid;
u64 bytes_reserved;
run_scheduled_bios(device);
}
+/*
+ * Add new device to list of registered devices
+ *
+ * Returns:
+ * 1 - first time device is seen
+ * 0 - device already known
+ * < 0 - error
+ */
static noinline int device_list_add(const char *path,
struct btrfs_super_block *disk_super,
u64 devid, struct btrfs_fs_devices **fs_devices_ret)
struct btrfs_device *device;
struct btrfs_fs_devices *fs_devices;
struct rcu_string *name;
+ int ret = 0;
u64 found_transid = btrfs_super_generation(disk_super);
fs_devices = find_fsid(disk_super->fsid);
fs_devices->num_devices++;
mutex_unlock(&fs_devices->device_list_mutex);
+ ret = 1;
device->fs_devices = fs_devices;
} else if (!device->name || strcmp(device->name->str, path)) {
name = rcu_string_strdup(path, GFP_NOFS);
fs_devices->latest_trans = found_transid;
}
*fs_devices_ret = fs_devices;
- return 0;
+
+ return ret;
}
static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
transid = btrfs_super_generation(disk_super);
total_devices = btrfs_super_num_devices(disk_super);
- if (disk_super->label[0]) {
- if (disk_super->label[BTRFS_LABEL_SIZE - 1])
- disk_super->label[BTRFS_LABEL_SIZE - 1] = '\0';
- printk(KERN_INFO "BTRFS: device label %s ", disk_super->label);
- } else {
- printk(KERN_INFO "BTRFS: device fsid %pU ", disk_super->fsid);
- }
-
- printk(KERN_CONT "devid %llu transid %llu %s\n", devid, transid, path);
-
ret = device_list_add(path, disk_super, devid, fs_devices_ret);
+ if (ret > 0) {
+ if (disk_super->label[0]) {
+ if (disk_super->label[BTRFS_LABEL_SIZE - 1])
+ disk_super->label[BTRFS_LABEL_SIZE - 1] = '\0';
+ printk(KERN_INFO "BTRFS: device label %s ", disk_super->label);
+ } else {
+ printk(KERN_INFO "BTRFS: device fsid %pU ", disk_super->fsid);
+ }
+
+ printk(KERN_CONT "devid %llu transid %llu %s\n", devid, transid, path);
+ ret = 0;
+ }
if (!ret && fs_devices_ret)
(*fs_devices_ret)->total_devices = total_devices;
* Returns true if all buffers which correspond to a file portion
* we want to read are uptodate.
*/
-int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
- unsigned long from)
+int block_is_partially_uptodate(struct page *page, unsigned long from,
+ unsigned long count)
{
unsigned block_start, block_end, blocksize;
unsigned to;
head = page_buffers(page);
blocksize = head->b_size;
- to = min_t(unsigned, PAGE_CACHE_SIZE - from, desc->count);
+ to = min_t(unsigned, PAGE_CACHE_SIZE - from, count);
to = from + to;
if (from < blocksize && to > PAGE_CACHE_SIZE - blocksize)
return 0;
/* check parameters */
ret = -EOPNOTSUPP;
if (!root->d_inode ||
- !root->d_inode->i_op ||
!root->d_inode->i_op->lookup ||
!root->d_inode->i_op->mkdir ||
!root->d_inode->i_op->setxattr ||
}
ret = -EPERM;
- if (!subdir->d_inode->i_op ||
- !subdir->d_inode->i_op->setxattr ||
+ if (!subdir->d_inode->i_op->setxattr ||
!subdir->d_inode->i_op->getxattr ||
!subdir->d_inode->i_op->lookup ||
!subdir->d_inode->i_op->mkdir ||
false);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
- goto out;
+ break;
}
num_pages = calc_pages_for(page_align, len);
false);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
- goto out;
+ break;
}
/*
}
} else {
loff_t old_size = inode->i_size;
+ struct iov_iter from;
/*
* No need to acquire the i_truncate_mutex. Because
* the MDS revokes Fwb caps before sending truncate
* are pending vmtruncate. So write and vmtruncate
* can not run at the same time
*/
- written = generic_file_buffered_write(iocb, iov, nr_segs,
- pos, &iocb->ki_pos,
- count, 0);
+ iov_iter_init(&from, iov, nr_segs, count, 0);
+ written = generic_perform_write(file, &from, pos);
+ if (likely(written >= 0))
+ iocb->ki_pos = pos + written;
if (inode->i_size > old_size)
ceph_fscache_update_objectsize(inode);
mutex_unlock(&inode->i_mutex);
+#include <linux/ceph/ceph_debug.h>
#include <linux/in.h>
#include "super.h"
#include "mds_client.h"
-#include <linux/ceph/ceph_debug.h>
-
#include "ioctl.h"
/* revalidate:cifs_revalidate, */
.setattr = cifs_setattr,
.getattr = cifs_getattr, /* do we need this anymore? */
- .rename = cifs_rename,
.permission = cifs_permission,
#ifdef CONFIG_CIFS_XATTR
.setxattr = cifs_setxattr,
struct cifsInodeInfo *cinode = CIFS_I(inode);
struct TCP_Server_Info *server = tlink_tcon(cfile->tlink)->ses->server;
ssize_t rc = -EACCES;
- loff_t lock_pos = pos;
+ loff_t lock_pos = iocb->ki_pos;
- if (file->f_flags & O_APPEND)
- lock_pos = i_size_read(inode);
/*
* We need to hold the sem to be sure nobody modifies lock list
* with a brlock that prevents writing.
*/
down_read(&cinode->lock_sem);
+ mutex_lock(&inode->i_mutex);
+ if (file->f_flags & O_APPEND)
+ lock_pos = i_size_read(inode);
if (!cifs_find_lock_conflict(cfile, lock_pos, iov_length(iov, nr_segs),
server->vals->exclusive_lock_type, NULL,
- CIFS_WRITE_OP))
- rc = generic_file_aio_write(iocb, iov, nr_segs, pos);
+ CIFS_WRITE_OP)) {
+ rc = __generic_file_aio_write(iocb, iov, nr_segs);
+ mutex_unlock(&inode->i_mutex);
+
+ if (rc > 0) {
+ ssize_t err;
+
+ err = generic_write_sync(file, iocb->ki_pos - rc, rc);
+ if (rc < 0)
+ rc = err;
+ }
+ } else {
+ mutex_unlock(&inode->i_mutex);
+ }
up_read(&cinode->lock_sem);
return rc;
}
/**
* cifs_readdata_to_iov - copy data from pages in response to an iovec
* @rdata: the readdata response with list of pages holding data
- * @iov: vector in which we should copy the data
- * @nr_segs: number of segments in vector
- * @offset: offset into file of the first iovec
- * @copied: used to return the amount of data copied to the iov
+ * @iter: destination for our data
*
* This function copies data from a list of pages in a readdata response into
* an array of iovecs. It will first calculate where the data should go
* based on the info in the readdata and then copy the data into that spot.
*/
-static ssize_t
-cifs_readdata_to_iov(struct cifs_readdata *rdata, const struct iovec *iov,
- unsigned long nr_segs, loff_t offset, ssize_t *copied)
+static int
+cifs_readdata_to_iov(struct cifs_readdata *rdata, struct iov_iter *iter)
{
- int rc = 0;
- struct iov_iter ii;
- size_t pos = rdata->offset - offset;
- ssize_t remaining = rdata->bytes;
- unsigned char *pdata;
+ size_t remaining = rdata->bytes;
unsigned int i;
- /* set up iov_iter and advance to the correct offset */
- iov_iter_init(&ii, iov, nr_segs, iov_length(iov, nr_segs), 0);
- iov_iter_advance(&ii, pos);
-
- *copied = 0;
for (i = 0; i < rdata->nr_pages; i++) {
- ssize_t copy;
struct page *page = rdata->pages[i];
-
- /* copy a whole page or whatever's left */
- copy = min_t(ssize_t, remaining, PAGE_SIZE);
-
- /* ...but limit it to whatever space is left in the iov */
- copy = min_t(ssize_t, copy, iov_iter_count(&ii));
-
- /* go while there's data to be copied and no errors */
- if (copy && !rc) {
- pdata = kmap(page);
- rc = memcpy_toiovecend(ii.iov, pdata, ii.iov_offset,
- (int)copy);
- kunmap(page);
- if (!rc) {
- *copied += copy;
- remaining -= copy;
- iov_iter_advance(&ii, copy);
- }
- }
+ size_t copy = min(remaining, PAGE_SIZE);
+ size_t written = copy_page_to_iter(page, 0, copy, iter);
+ remaining -= written;
+ if (written < copy && iov_iter_count(iter) > 0)
+ break;
}
-
- return rc;
+ return remaining ? -EFAULT : 0;
}
static void
return total_read > 0 ? total_read : result;
}
-static ssize_t
-cifs_iovec_read(struct file *file, const struct iovec *iov,
- unsigned long nr_segs, loff_t *poffset)
+ssize_t cifs_user_readv(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long nr_segs, loff_t pos)
{
+ struct file *file = iocb->ki_filp;
ssize_t rc;
size_t len, cur_len;
ssize_t total_read = 0;
- loff_t offset = *poffset;
+ loff_t offset = pos;
unsigned int npages;
struct cifs_sb_info *cifs_sb;
struct cifs_tcon *tcon;
struct cifsFileInfo *open_file;
struct cifs_readdata *rdata, *tmp;
struct list_head rdata_list;
+ struct iov_iter to;
pid_t pid;
if (!nr_segs)
if (!len)
return 0;
+ iov_iter_init(&to, iov, nr_segs, len, 0);
+
INIT_LIST_HEAD(&rdata_list);
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
open_file = file->private_data;
if (!list_empty(&rdata_list))
rc = 0;
+ len = iov_iter_count(&to);
/* the loop below should proceed in the order of increasing offsets */
-restart_loop:
list_for_each_entry_safe(rdata, tmp, &rdata_list, list) {
+ again:
if (!rc) {
- ssize_t copied;
-
/* FIXME: freezable sleep too? */
rc = wait_for_completion_killable(&rdata->done);
if (rc)
rc = -EINTR;
- else if (rdata->result)
+ else if (rdata->result) {
rc = rdata->result;
- else {
- rc = cifs_readdata_to_iov(rdata, iov,
- nr_segs, *poffset,
- &copied);
- total_read += copied;
+ /* resend call if it's a retryable error */
+ if (rc == -EAGAIN) {
+ rc = cifs_retry_async_readv(rdata);
+ goto again;
+ }
+ } else {
+ rc = cifs_readdata_to_iov(rdata, &to);
}
- /* resend call if it's a retryable error */
- if (rc == -EAGAIN) {
- rc = cifs_retry_async_readv(rdata);
- goto restart_loop;
- }
}
list_del_init(&rdata->list);
kref_put(&rdata->refcount, cifs_uncached_readdata_release);
}
+ total_read = len - iov_iter_count(&to);
+
cifs_stats_bytes_read(tcon, total_read);
- *poffset += total_read;
/* mask nodata case */
if (rc == -ENODATA)
rc = 0;
- return total_read ? total_read : rc;
-}
-
-ssize_t cifs_user_readv(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t pos)
-{
- ssize_t read;
-
- read = cifs_iovec_read(iocb->ki_filp, iov, nr_segs, &pos);
- if (read > 0)
- iocb->ki_pos = pos;
-
- return read;
+ if (total_read) {
+ iocb->ki_pos = pos + total_read;
+ return total_read;
+ }
+ return rc;
}
ssize_t
ssize_t read_code(struct file *file, unsigned long addr, loff_t pos, size_t len)
{
- ssize_t res = file->f_op->read(file, (void __user *)addr, len, &pos);
+ ssize_t res = vfs_read(file, (void __user *)addr, len, &pos);
if (res > 0)
flush_icache_range(addr, addr + len);
return res;
#undef ORE_DBGMSG2
#define ORE_DBGMSG2 ORE_DBGMSG
-struct page *_raid_page_alloc(void)
+static struct page *_raid_page_alloc(void)
{
return alloc_page(GFP_KERNEL);
}
-void _raid_page_free(struct page *p)
+static void _raid_page_free(struct page *p)
{
__free_page(p);
}
return !(odi->systemid_len || odi->osdname_len);
}
-int __alloc_dev_table(struct exofs_sb_info *sbi, unsigned numdevs,
+static int __alloc_dev_table(struct exofs_sb_info *sbi, unsigned numdevs,
struct exofs_dev **peds)
{
struct __alloc_ore_devs_and_exofs_devs {
overwrite = 1;
}
- ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
+ ret = __generic_file_aio_write(iocb, iov, nr_segs);
mutex_unlock(&inode->i_mutex);
if (ret > 0) {
int sysctl_nr_open __read_mostly = 1024*1024;
int sysctl_nr_open_min = BITS_PER_LONG;
-int sysctl_nr_open_max = 1024 * 1024; /* raised later */
+/* our max() is unusable in constant expressions ;-/ */
+#define __const_max(x, y) ((x) < (y) ? (x) : (y))
+int sysctl_nr_open_max = __const_max(INT_MAX, ~(size_t)0/sizeof(void *)) &
+ -BITS_PER_LONG;
static void *alloc_fdmem(size_t size)
{
}
}
-void __init files_defer_init(void)
-{
- sysctl_nr_open_max = min((size_t)INT_MAX, ~(size_t)0/sizeof(void *)) &
- -BITS_PER_LONG;
-}
-
struct files_struct init_files = {
.count = ATOMIC_INIT(1),
.fdt = &init_files.fdtab,
static inline void file_free(struct file *f)
{
percpu_counter_dec(&nr_files);
- file_check_state(f);
call_rcu(&f->f_u.fu_rcuhead, file_free_rcu);
}
file->f_mapping = path->dentry->d_inode->i_mapping;
file->f_mode = mode;
file->f_op = fop;
-
- /*
- * These mounts don't really matter in practice
- * for r/o bind mounts. They aren't userspace-
- * visible. We do this for consistency, and so
- * that we can do debugging checks at __fput()
- */
- if ((mode & FMODE_WRITE) && !special_file(path->dentry->d_inode->i_mode)) {
- file_take_write(file);
- WARN_ON(mnt_clone_write(path->mnt));
- }
if ((mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
i_readcount_inc(path->dentry->d_inode);
return file;
}
EXPORT_SYMBOL(alloc_file);
-/**
- * drop_file_write_access - give up ability to write to a file
- * @file: the file to which we will stop writing
- *
- * This is a central place which will give up the ability
- * to write to @file, along with access to write through
- * its vfsmount.
- */
-static void drop_file_write_access(struct file *file)
-{
- struct vfsmount *mnt = file->f_path.mnt;
- struct dentry *dentry = file->f_path.dentry;
- struct inode *inode = dentry->d_inode;
-
- put_write_access(inode);
-
- if (special_file(inode->i_mode))
- return;
- if (file_check_writeable(file) != 0)
- return;
- __mnt_drop_write(mnt);
- file_release_write(file);
-}
-
/* the real guts of fput() - releasing the last reference to file
*/
static void __fput(struct file *file)
put_pid(file->f_owner.pid);
if ((file->f_mode & (FMODE_READ | FMODE_WRITE)) == FMODE_READ)
i_readcount_dec(inode);
- if (file->f_mode & FMODE_WRITE)
- drop_file_write_access(file);
+ if (file->f_mode & FMODE_WRITER) {
+ put_write_access(inode);
+ __mnt_drop_write(mnt);
+ }
file->f_path.dentry = NULL;
file->f_path.mnt = NULL;
file->f_inode = NULL;
n = (mempages * (PAGE_SIZE / 1024)) / 10;
files_stat.max_files = max_t(unsigned long, n, NR_FILE);
- files_defer_init();
percpu_counter_init(&nr_files, 0);
}
struct pipe_buffer *buf = cs->currbuf;
if (!cs->write) {
- buf->ops->unmap(cs->pipe, buf, cs->mapaddr);
+ kunmap_atomic(cs->mapaddr);
} else {
- kunmap(buf->page);
+ kunmap_atomic(cs->mapaddr);
buf->len = PAGE_SIZE - cs->len;
}
cs->currbuf = NULL;
cs->mapaddr = NULL;
} else if (cs->mapaddr) {
- kunmap(cs->pg);
+ kunmap_atomic(cs->mapaddr);
if (cs->write) {
flush_dcache_page(cs->pg);
set_page_dirty_lock(cs->pg);
BUG_ON(!cs->nr_segs);
cs->currbuf = buf;
- cs->mapaddr = buf->ops->map(cs->pipe, buf, 0);
+ cs->mapaddr = kmap_atomic(buf->page);
cs->len = buf->len;
cs->buf = cs->mapaddr + buf->offset;
cs->pipebufs++;
buf->len = 0;
cs->currbuf = buf;
- cs->mapaddr = kmap(page);
+ cs->mapaddr = kmap_atomic(page);
cs->buf = cs->mapaddr;
cs->len = PAGE_SIZE;
cs->pipebufs++;
return err;
BUG_ON(err != 1);
offset = cs->addr % PAGE_SIZE;
- cs->mapaddr = kmap(cs->pg);
+ cs->mapaddr = kmap_atomic(cs->pg);
cs->buf = cs->mapaddr + offset;
cs->len = min(PAGE_SIZE - offset, cs->seglen);
cs->seglen -= cs->len;
out_fallback_unlock:
unlock_page(newpage);
out_fallback:
- cs->mapaddr = buf->ops->map(cs->pipe, buf, 1);
+ cs->mapaddr = kmap_atomic(buf->page);
cs->buf = cs->mapaddr + buf->offset;
err = lock_request(cs->fc, cs->req);
if (mapping_writably_mapped(mapping))
flush_dcache_page(page);
- pagefault_disable();
tmp = iov_iter_copy_from_user_atomic(page, ii, offset, bytes);
- pagefault_enable();
flush_dcache_page(page);
mark_page_accessed(page);
goto out;
if (file->f_flags & O_DIRECT) {
- written = generic_file_direct_write(iocb, iov, &nr_segs,
- pos, &iocb->ki_pos,
+ written = generic_file_direct_write(iocb, iov, &nr_segs, pos,
count, ocount);
if (written < 0 || written == count)
goto out;
if (warned++ == 0)
printk(KERN_WARNING
"lockd_up: makesock failed, error=%d\n", err);
+ svc_shutdown_net(serv, net);
return err;
}
struct user_namespace *user_ns;
u64 seq; /* Sequence number to prevent loops */
wait_queue_head_t poll;
- int event;
+ u64 event;
};
struct mnt_pcp {
struct mnt_namespace *ns;
struct path root;
int (*show)(struct seq_file *, struct vfsmount *);
+ void *cached_mount;
+ u64 cached_event;
+ loff_t cached_index;
};
#define proc_mounts(p) (container_of((p), struct proc_mounts, m))
return -EACCES;
}
+EXPORT_SYMBOL(generic_permission);
/*
* We _really_ want to just do "generic_permission()" without
return retval;
return __inode_permission(inode, mask);
}
+EXPORT_SYMBOL(inode_permission);
/**
* path_get - get a reference to a path
path->mnt = &parent->mnt;
return 1;
}
+EXPORT_SYMBOL(follow_up);
/*
* Perform an automount
}
return 0;
}
+EXPORT_SYMBOL(follow_down_one);
static inline bool managed_dentry_might_block(struct dentry *dentry)
{
}
return 0;
}
+EXPORT_SYMBOL(follow_down);
/*
* Skip to top of mountpoint pile in refwalk mode for follow_dotdot()
*path = nd.path;
return res;
}
+EXPORT_SYMBOL(kern_path);
/**
* vfs_path_lookup - lookup a file path relative to a dentry-vfsmount pair
*path = nd.path;
return err;
}
+EXPORT_SYMBOL(vfs_path_lookup);
/*
* Restricted form of lookup. Doesn't follow links, single-component only,
return __lookup_hash(&this, base, 0);
}
+EXPORT_SYMBOL(lookup_one_len);
int user_path_at_empty(int dfd, const char __user *name, unsigned flags,
struct path *path, int *empty)
{
return user_path_at_empty(dfd, name, flags, path, NULL);
}
+EXPORT_SYMBOL(user_path_at);
/*
* NB: most callers don't do anything directly with the reference to the
mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_CHILD);
return NULL;
}
+EXPORT_SYMBOL(lock_rename);
void unlock_rename(struct dentry *p1, struct dentry *p2)
{
mutex_unlock(&p1->d_inode->i_sb->s_vfs_rename_mutex);
}
}
+EXPORT_SYMBOL(unlock_rename);
int vfs_create(struct inode *dir, struct dentry *dentry, umode_t mode,
bool want_excl)
fsnotify_create(dir, dentry);
return error;
}
+EXPORT_SYMBOL(vfs_create);
static int may_open(struct path *path, int acc_mode, int flag)
{
fsnotify_create(dir, dentry);
return error;
}
+EXPORT_SYMBOL(vfs_mknod);
static int may_mknod(umode_t mode)
{
fsnotify_mkdir(dir, dentry);
return error;
}
+EXPORT_SYMBOL(vfs_mkdir);
SYSCALL_DEFINE3(mkdirat, int, dfd, const char __user *, pathname, umode_t, mode)
{
__d_drop(dentry);
spin_unlock(&dentry->d_lock);
}
+EXPORT_SYMBOL(dentry_unhash);
int vfs_rmdir(struct inode *dir, struct dentry *dentry)
{
d_delete(dentry);
return error;
}
+EXPORT_SYMBOL(vfs_rmdir);
static long do_rmdir(int dfd, const char __user *pathname)
{
return error;
}
+EXPORT_SYMBOL(vfs_unlink);
/*
* Make sure that the actual truncation of the file will occur outside its
fsnotify_create(dir, dentry);
return error;
}
+EXPORT_SYMBOL(vfs_symlink);
SYSCALL_DEFINE3(symlinkat, const char __user *, oldname,
int, newdfd, const char __user *, newname)
fsnotify_link(dir, inode, new_dentry);
return error;
}
+EXPORT_SYMBOL(vfs_link);
/*
* Hardlinks are often used in delicate situations. We avoid
return error;
}
+EXPORT_SYMBOL(vfs_rename);
SYSCALL_DEFINE5(renameat2, int, olddfd, const char __user *, oldname,
int, newdfd, const char __user *, newname, unsigned int, flags)
return sys_renameat2(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
}
-int vfs_readlink(struct dentry *dentry, char __user *buffer, int buflen, const char *link)
+int readlink_copy(char __user *buffer, int buflen, const char *link)
{
- int len;
-
- len = PTR_ERR(link);
+ int len = PTR_ERR(link);
if (IS_ERR(link))
goto out;
out:
return len;
}
+EXPORT_SYMBOL(readlink_copy);
/*
* A helper for ->readlink(). This should be used *ONLY* for symlinks that
if (IS_ERR(cookie))
return PTR_ERR(cookie);
- res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd));
+ res = readlink_copy(buffer, buflen, nd_get_link(&nd));
if (dentry->d_inode->i_op->put_link)
dentry->d_inode->i_op->put_link(dentry, &nd, cookie);
return res;
}
+EXPORT_SYMBOL(generic_readlink);
/* get the link contents into pagecache */
static char *page_getlink(struct dentry * dentry, struct page **ppage)
int page_readlink(struct dentry *dentry, char __user *buffer, int buflen)
{
struct page *page = NULL;
- char *s = page_getlink(dentry, &page);
- int res = vfs_readlink(dentry,buffer,buflen,s);
+ int res = readlink_copy(buffer, buflen, page_getlink(dentry, &page));
if (page) {
kunmap(page);
page_cache_release(page);
}
return res;
}
+EXPORT_SYMBOL(page_readlink);
void *page_follow_link_light(struct dentry *dentry, struct nameidata *nd)
{
nd_set_link(nd, page_getlink(dentry, &page));
return page;
}
+EXPORT_SYMBOL(page_follow_link_light);
void page_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
{
page_cache_release(page);
}
}
+EXPORT_SYMBOL(page_put_link);
/*
* The nofs argument instructs pagecache_write_begin to pass AOP_FLAG_NOFS
fail:
return err;
}
+EXPORT_SYMBOL(__page_symlink);
int page_symlink(struct inode *inode, const char *symname, int len)
{
return __page_symlink(inode, symname, len,
!(mapping_gfp_mask(inode->i_mapping) & __GFP_FS));
}
+EXPORT_SYMBOL(page_symlink);
const struct inode_operations page_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
};
-
-EXPORT_SYMBOL(user_path_at);
-EXPORT_SYMBOL(follow_down_one);
-EXPORT_SYMBOL(follow_down);
-EXPORT_SYMBOL(follow_up);
-EXPORT_SYMBOL(get_write_access); /* nfsd */
-EXPORT_SYMBOL(lock_rename);
-EXPORT_SYMBOL(lookup_one_len);
-EXPORT_SYMBOL(page_follow_link_light);
-EXPORT_SYMBOL(page_put_link);
-EXPORT_SYMBOL(page_readlink);
-EXPORT_SYMBOL(__page_symlink);
-EXPORT_SYMBOL(page_symlink);
EXPORT_SYMBOL(page_symlink_inode_operations);
-EXPORT_SYMBOL(kern_path);
-EXPORT_SYMBOL(vfs_path_lookup);
-EXPORT_SYMBOL(inode_permission);
-EXPORT_SYMBOL(unlock_rename);
-EXPORT_SYMBOL(vfs_create);
-EXPORT_SYMBOL(vfs_link);
-EXPORT_SYMBOL(vfs_mkdir);
-EXPORT_SYMBOL(vfs_mknod);
-EXPORT_SYMBOL(generic_permission);
-EXPORT_SYMBOL(vfs_readlink);
-EXPORT_SYMBOL(vfs_rename);
-EXPORT_SYMBOL(vfs_rmdir);
-EXPORT_SYMBOL(vfs_symlink);
-EXPORT_SYMBOL(vfs_unlink);
-EXPORT_SYMBOL(dentry_unhash);
-EXPORT_SYMBOL(generic_readlink);
}
__setup("mphash_entries=", set_mphash_entries);
-static int event;
+static u64 event;
static DEFINE_IDA(mnt_id_ida);
static DEFINE_IDA(mnt_group_ida);
static DEFINE_SPINLOCK(mnt_id_lock);
*/
int __mnt_want_write_file(struct file *file)
{
- struct inode *inode = file_inode(file);
-
- if (!(file->f_mode & FMODE_WRITE) || special_file(inode->i_mode))
+ if (!(file->f_mode & FMODE_WRITER))
return __mnt_want_write(file->f_path.mnt);
else
return mnt_clone_write(file->f_path.mnt);
static void free_vfsmnt(struct mount *mnt)
{
kfree(mnt->mnt_devname);
- mnt_free_id(mnt);
#ifdef CONFIG_SMP
free_percpu(mnt->mnt_pcp);
#endif
kmem_cache_free(mnt_cache, mnt);
}
+static void delayed_free_vfsmnt(struct rcu_head *head)
+{
+ free_vfsmnt(container_of(head, struct mount, mnt_rcu));
+}
+
/* call under rcu_read_lock */
bool legitimize_mnt(struct vfsmount *bastard, unsigned seq)
{
root = mount_fs(type, flags, name, data);
if (IS_ERR(root)) {
+ mnt_free_id(mnt);
free_vfsmnt(mnt);
return ERR_CAST(root);
}
goto out_free;
}
- mnt->mnt.mnt_flags = old->mnt.mnt_flags & ~MNT_WRITE_HOLD;
+ mnt->mnt.mnt_flags = old->mnt.mnt_flags & ~(MNT_WRITE_HOLD|MNT_MARKED);
/* Don't allow unprivileged users to change mount flags */
if ((flag & CL_UNPRIVILEGED) && (mnt->mnt.mnt_flags & MNT_READONLY))
mnt->mnt.mnt_flags |= MNT_LOCK_READONLY;
return mnt;
out_free:
+ mnt_free_id(mnt);
free_vfsmnt(mnt);
return ERR_PTR(err);
}
-static void delayed_free(struct rcu_head *head)
-{
- struct mount *mnt = container_of(head, struct mount, mnt_rcu);
- kfree(mnt->mnt_devname);
-#ifdef CONFIG_SMP
- free_percpu(mnt->mnt_pcp);
-#endif
- kmem_cache_free(mnt_cache, mnt);
-}
-
static void mntput_no_expire(struct mount *mnt)
{
put_again:
dput(mnt->mnt.mnt_root);
deactivate_super(mnt->mnt.mnt_sb);
mnt_free_id(mnt);
- call_rcu(&mnt->mnt_rcu, delayed_free);
+ call_rcu(&mnt->mnt_rcu, delayed_free_vfsmnt);
}
void mntput(struct vfsmount *mnt)
struct proc_mounts *p = proc_mounts(m);
down_read(&namespace_sem);
- return seq_list_start(&p->ns->list, *pos);
+ if (p->cached_event == p->ns->event) {
+ void *v = p->cached_mount;
+ if (*pos == p->cached_index)
+ return v;
+ if (*pos == p->cached_index + 1) {
+ v = seq_list_next(v, &p->ns->list, &p->cached_index);
+ return p->cached_mount = v;
+ }
+ }
+
+ p->cached_event = p->ns->event;
+ p->cached_mount = seq_list_start(&p->ns->list, *pos);
+ p->cached_index = *pos;
+ return p->cached_mount;
}
static void *m_next(struct seq_file *m, void *v, loff_t *pos)
{
struct proc_mounts *p = proc_mounts(m);
- return seq_list_next(v, &p->ns->list, pos);
+ p->cached_mount = seq_list_next(v, &p->ns->list, pos);
+ p->cached_index = *pos;
+ return p->cached_mount;
}
static void m_stop(struct seq_file *m, void *v)
if (err)
goto out;
err = propagate_mnt(dest_mnt, dest_mp, source_mnt, &tree_list);
+ lock_mount_hash();
if (err)
goto out_cleanup_ids;
- lock_mount_hash();
for (p = source_mnt; p; p = next_mnt(p, source_mnt))
set_mnt_shared(p);
} else {
return 0;
out_cleanup_ids:
+ while (!hlist_empty(&tree_list)) {
+ child = hlist_entry(tree_list.first, struct mount, mnt_hash);
+ umount_tree(child, 0);
+ }
+ unlock_mount_hash();
cleanup_group_ids(source_mnt, NULL);
out:
return err;
struct mount *parent;
int err;
- mnt_flags &= ~(MNT_SHARED | MNT_WRITE_HOLD | MNT_INTERNAL | MNT_DOOMED | MNT_SYNC_UMOUNT);
+ mnt_flags &= ~MNT_INTERNAL_FLAGS;
mp = lock_mount(path);
if (IS_ERR(mp))
if (val)
goto finished;
- DDPRINTK("ncp_lookup_validate: %pd2 not valid, age=%ld, server lookup\n",
+ ncp_dbg(2, "%pd2 not valid, age=%ld, server lookup\n",
dentry, NCP_GET_AGE(dentry));
len = sizeof(__name);
res = ncp_obtain_info(server, dir, __name, &(finfo.i));
}
finfo.volume = finfo.i.volNumber;
- DDPRINTK("ncp_lookup_validate: looked for %pd/%s, res=%d\n",
+ ncp_dbg(2, "looked for %pd/%s, res=%d\n",
dentry->d_parent, __name, res);
/*
* If we didn't find it, or if it has a different dirEntNum to
ncp_new_dentry(dentry);
val=1;
} else
- DDPRINTK("ncp_lookup_validate: found, but dirEntNum changed\n");
+ ncp_dbg(2, "found, but dirEntNum changed\n");
ncp_update_inode2(inode, &finfo);
mutex_unlock(&inode->i_mutex);
}
finished:
- DDPRINTK("ncp_lookup_validate: result=%d\n", val);
+ ncp_dbg(2, "result=%d\n", val);
dput(parent);
return val;
}
ctl.page = NULL;
ctl.cache = NULL;
- DDPRINTK("ncp_readdir: reading %pD2, pos=%d\n", file,
- (int) ctx->pos);
+ ncp_dbg(2, "reading %pD2, pos=%d\n", file, (int)ctx->pos);
result = -EIO;
/* Do not generate '.' and '..' when server is dead. */
struct ncp_entry_info entry;
int i;
- DPRINTK("ncp_read_volume_list: pos=%ld\n",
- (unsigned long) ctx->pos);
+ ncp_dbg(1, "pos=%ld\n", (unsigned long)ctx->pos);
for (i = 0; i < NCP_NUMBER_OF_VOLUMES; i++) {
int inval_dentry;
if (!strlen(info.volume_name))
continue;
- DPRINTK("ncp_read_volume_list: found vol: %s\n",
- info.volume_name);
+ ncp_dbg(1, "found vol: %s\n", info.volume_name);
if (ncp_lookup_volume(server, info.volume_name,
&entry.i)) {
- DPRINTK("ncpfs: could not lookup vol %s\n",
+ ncp_dbg(1, "could not lookup vol %s\n",
info.volume_name);
continue;
}
int more;
size_t bufsize;
- DPRINTK("ncp_do_readdir: %pD2, fpos=%ld\n", file,
- (unsigned long) ctx->pos);
- PPRINTK("ncp_do_readdir: init %pD, volnum=%d, dirent=%u\n",
- file, NCP_FINFO(dir)->volNumber, NCP_FINFO(dir)->dirEntNum);
+ ncp_dbg(1, "%pD2, fpos=%ld\n", file, (unsigned long)ctx->pos);
+ ncp_vdbg("init %pD, volnum=%d, dirent=%u\n",
+ file, NCP_FINFO(dir)->volNumber, NCP_FINFO(dir)->dirEntNum);
err = ncp_initialize_search(server, dir, &seq);
if (err) {
- DPRINTK("ncp_do_readdir: init failed, err=%d\n", err);
+ ncp_dbg(1, "init failed, err=%d\n", err);
return;
}
/* We MUST NOT use server->buffer_size handshaked with server if we are
goto out;
result = -ENOENT;
if (ncp_get_volume_root(server, __name, &volNumber, &dirEntNum, &DosDirNum)) {
- PPRINTK("ncp_conn_logged_in: %s not found\n",
- server->m.mounted_vol);
+ ncp_vdbg("%s not found\n", server->m.mounted_vol);
goto out;
}
dent = sb->s_root;
NCP_FINFO(ino)->DosDirNum = DosDirNum;
result = 0;
} else {
- DPRINTK("ncpfs: sb->s_root->d_inode == NULL!\n");
+ ncp_dbg(1, "sb->s_root->d_inode == NULL!\n");
}
} else {
- DPRINTK("ncpfs: sb->s_root == NULL!\n");
+ ncp_dbg(1, "sb->s_root == NULL!\n");
}
} else
result = 0;
if (!ncp_conn_valid(server))
goto finished;
- PPRINTK("ncp_lookup: server lookup for %pd2\n", dentry);
+ ncp_vdbg("server lookup for %pd2\n", dentry);
len = sizeof(__name);
if (ncp_is_server_root(dir)) {
dentry->d_name.len, 1);
if (!res)
res = ncp_lookup_volume(server, __name, &(finfo.i));
- if (!res)
- ncp_update_known_namespace(server, finfo.i.volNumber, NULL);
+ if (!res)
+ ncp_update_known_namespace(server, finfo.i.volNumber, NULL);
} else {
res = ncp_io2vol(server, __name, &len, dentry->d_name.name,
dentry->d_name.len, !ncp_preserve_case(dir));
if (!res)
res = ncp_obtain_info(server, dir, __name, &(finfo.i));
}
- PPRINTK("ncp_lookup: looked for %pd2, res=%d\n", dentry, res);
+ ncp_vdbg("looked for %pd2, res=%d\n", dentry, res);
/*
* If we didn't find an entry, make a negative dentry.
*/
}
finished:
- PPRINTK("ncp_lookup: result=%d\n", error);
+ ncp_vdbg("result=%d\n", error);
return ERR_PTR(error);
}
return error;
out_close:
- PPRINTK("ncp_instantiate: %pd2 failed, closing file\n", dentry);
+ ncp_vdbg("%pd2 failed, closing file\n", dentry);
ncp_close_file(NCP_SERVER(dir), finfo->file_handle);
goto out;
}
int opmode;
__u8 __name[NCP_MAXPATHLEN + 1];
- PPRINTK("ncp_create_new: creating %pd2, mode=%hx\n", dentry, mode);
+ ncp_vdbg("creating %pd2, mode=%hx\n", dentry, mode);
ncp_age_dentry(server, dentry);
len = sizeof(__name);
error = -ENAMETOOLONG;
else if (result < 0)
error = result;
- DPRINTK("ncp_create: %pd2 failed\n", dentry);
+ ncp_dbg(1, "%pd2 failed\n", dentry);
goto out;
}
opmode = O_WRONLY;
int error, len;
__u8 __name[NCP_MAXPATHLEN + 1];
- DPRINTK("ncp_mkdir: making %pd2\n", dentry);
+ ncp_dbg(1, "making %pd2\n", dentry);
ncp_age_dentry(server, dentry);
len = sizeof(__name);
int error, result, len;
__u8 __name[NCP_MAXPATHLEN + 1];
- DPRINTK("ncp_rmdir: removing %pd2\n", dentry);
+ ncp_dbg(1, "removing %pd2\n", dentry);
len = sizeof(__name);
error = ncp_io2vol(server, __name, &len, dentry->d_name.name,
int error;
server = NCP_SERVER(dir);
- DPRINTK("ncp_unlink: unlinking %pd2\n", dentry);
+ ncp_dbg(1, "unlinking %pd2\n", dentry);
/*
* Check whether to close the file ...
*/
if (inode) {
- PPRINTK("ncp_unlink: closing file\n");
+ ncp_vdbg("closing file\n");
ncp_make_closed(inode);
}
#endif
switch (error) {
case 0x00:
- DPRINTK("ncp: removed %pd2\n", dentry);
+ ncp_dbg(1, "removed %pd2\n", dentry);
break;
case 0x85:
case 0x8A:
int old_len, new_len;
__u8 __old_name[NCP_MAXPATHLEN + 1], __new_name[NCP_MAXPATHLEN + 1];
- DPRINTK("ncp_rename: %pd2 to %pd2\n", old_dentry, new_dentry);
+ ncp_dbg(1, "%pd2 to %pd2\n", old_dentry, new_dentry);
ncp_age_dentry(server, old_dentry);
ncp_age_dentry(server, new_dentry);
#endif
switch (error) {
case 0x00:
- DPRINTK("ncp renamed %pd -> %pd.\n",
- old_dentry, new_dentry);
+ ncp_dbg(1, "renamed %pd -> %pd\n",
+ old_dentry, new_dentry);
break;
case 0x9E:
error = -ENAMETOOLONG;
if (!new_valid_dev(rdev))
return -EINVAL;
if (ncp_is_nfs_extras(NCP_SERVER(dir), NCP_FINFO(dir)->volNumber)) {
- DPRINTK(KERN_DEBUG "ncp_mknod: mode = 0%ho\n", mode);
+ ncp_dbg(1, "mode = 0%ho\n", mode);
return ncp_create_new(dir, dentry, mode, rdev, 0);
}
return -EPERM; /* Strange, but true */
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <asm/uaccess.h>
#include <linux/time.h>
error = -EINVAL;
if (!inode) {
- printk(KERN_ERR "ncp_make_open: got NULL inode\n");
+ pr_err("%s: got NULL inode\n", __func__);
goto out;
}
- DPRINTK("ncp_make_open: opened=%d, volume # %u, dir entry # %u\n",
+ ncp_dbg(1, "opened=%d, volume # %u, dir entry # %u\n",
atomic_read(&NCP_FINFO(inode)->opened),
NCP_FINFO(inode)->volNumber,
NCP_FINFO(inode)->dirEntNum);
break;
}
if (result) {
- PPRINTK("ncp_make_open: failed, result=%d\n", result);
+ ncp_vdbg("failed, result=%d\n", result);
goto out_unlock;
}
/*
}
access = NCP_FINFO(inode)->access;
- PPRINTK("ncp_make_open: file open, access=%x\n", access);
+ ncp_vdbg("file open, access=%x\n", access);
if (access == right || access == O_RDWR) {
atomic_inc(&NCP_FINFO(inode)->opened);
error = 0;
void* freepage;
size_t freelen;
- DPRINTK("ncp_file_read: enter %pd2\n", dentry);
+ ncp_dbg(1, "enter %pd2\n", dentry);
pos = *ppos;
error = ncp_make_open(inode, O_RDONLY);
if (error) {
- DPRINTK(KERN_ERR "ncp_file_read: open failed, error=%d\n", error);
+ ncp_dbg(1, "open failed, error=%d\n", error);
return error;
}
file_accessed(file);
- DPRINTK("ncp_file_read: exit %pd2\n", dentry);
+ ncp_dbg(1, "exit %pd2\n", dentry);
outrel:
ncp_inode_close(inode);
return already_read ? already_read : error;
int errno;
void* bouncebuffer;
- DPRINTK("ncp_file_write: enter %pd2\n", dentry);
+ ncp_dbg(1, "enter %pd2\n", dentry);
if ((ssize_t) count < 0)
return -EINVAL;
pos = *ppos;
return 0;
errno = ncp_make_open(inode, O_WRONLY);
if (errno) {
- DPRINTK(KERN_ERR "ncp_file_write: open failed, error=%d\n", errno);
+ ncp_dbg(1, "open failed, error=%d\n", errno);
return errno;
}
bufsize = NCP_SERVER(inode)->buffer_size;
i_size_write(inode, pos);
mutex_unlock(&inode->i_mutex);
}
- DPRINTK("ncp_file_write: exit %pd2\n", dentry);
+ ncp_dbg(1, "exit %pd2\n", dentry);
outrel:
ncp_inode_close(inode);
return already_written ? already_written : errno;
static int ncp_release(struct inode *inode, struct file *file) {
if (ncp_make_closed(inode)) {
- DPRINTK("ncp_release: failed to close\n");
+ ncp_dbg(1, "failed to close\n");
}
return 0;
}
* getopt.c
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/string.h>
if (opts->has_arg & OPT_NOPARAM) {
return opts->val;
}
- printk(KERN_INFO "%s: the %s option requires an argument\n",
- caller, token);
+ pr_info("%s: the %s option requires an argument\n",
+ caller, token);
return -EINVAL;
}
if (opts->has_arg & OPT_INT) {
if (!*v) {
return opts->val;
}
- printk(KERN_INFO "%s: invalid numeric value in %s=%s\n",
+ pr_info("%s: invalid numeric value in %s=%s\n",
caller, token, val);
return -EDOM;
}
if (opts->has_arg & OPT_STRING) {
return opts->val;
}
- printk(KERN_INFO "%s: unexpected argument %s to the %s option\n",
+ pr_info("%s: unexpected argument %s to the %s option\n",
caller, val, token);
return -EINVAL;
}
}
- printk(KERN_INFO "%s: Unrecognized mount option %s\n", caller, token);
+ pr_info("%s: Unrecognized mount option %s\n", caller, token);
return -EOPNOTSUPP;
}
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <asm/uaccess.h>
NCP_FINFO(inode)->access = nwinfo->access;
memcpy(NCP_FINFO(inode)->file_handle, nwinfo->file_handle,
sizeof(nwinfo->file_handle));
- DPRINTK("ncp_update_inode: updated %s, volnum=%d, dirent=%u\n",
+ ncp_dbg(1, "updated %s, volnum=%d, dirent=%u\n",
nwinfo->i.entryName, NCP_FINFO(inode)->volNumber,
NCP_FINFO(inode)->dirEntNum);
}
static void ncp_update_dates(struct inode *inode, struct nw_info_struct *nwi)
{
/* NFS namespace mode overrides others if it's set. */
- DPRINTK(KERN_DEBUG "ncp_update_dates_and_mode: (%s) nfs.mode=0%o\n",
- nwi->entryName, nwi->nfs.mode);
+ ncp_dbg(1, "(%s) nfs.mode=0%o\n", nwi->entryName, nwi->nfs.mode);
if (nwi->nfs.mode) {
/* XXX Security? */
inode->i_mode = nwi->nfs.mode;
ncp_update_attrs(inode, nwinfo);
- DDPRINTK("ncp_read_inode: inode->i_mode = %u\n", inode->i_mode);
+ ncp_dbg(2, "inode->i_mode = %u\n", inode->i_mode);
set_nlink(inode, 1);
inode->i_uid = server->m.uid;
struct inode *inode;
if (info == NULL) {
- printk(KERN_ERR "ncp_iget: info is NULL\n");
+ pr_err("%s: info is NULL\n", __func__);
return NULL;
}
}
insert_inode_hash(inode);
} else
- printk(KERN_ERR "ncp_iget: iget failed!\n");
+ pr_err("%s: iget failed!\n", __func__);
return inode;
}
clear_inode(inode);
if (S_ISDIR(inode->i_mode)) {
- DDPRINTK("ncp_evict_inode: put directory %ld\n", inode->i_ino);
+ ncp_dbg(2, "put directory %ld\n", inode->i_ino);
}
if (ncp_make_closed(inode) != 0) {
/* We can't do anything but complain. */
- printk(KERN_ERR "ncp_evict_inode: could not close\n");
+ pr_err("%s: could not close\n", __func__);
}
}
{
struct ncp_mount_data_kernel data;
struct ncp_server *server;
- struct file *ncp_filp;
struct inode *root_inode;
- struct inode *sock_inode;
struct socket *sock;
int error;
int default_bufsize;
if (!uid_valid(data.mounted_uid) || !uid_valid(data.uid) ||
!gid_valid(data.gid))
goto out;
- error = -EBADF;
- ncp_filp = fget(data.ncp_fd);
- if (!ncp_filp)
- goto out;
- error = -ENOTSOCK;
- sock_inode = file_inode(ncp_filp);
- if (!S_ISSOCK(sock_inode->i_mode))
- goto out_fput;
- sock = SOCKET_I(sock_inode);
+ sock = sockfd_lookup(data.ncp_fd, &error);
if (!sock)
- goto out_fput;
-
+ goto out;
+
if (sock->type == SOCK_STREAM)
default_bufsize = 0xF000;
else
if (error)
goto out_fput;
- server->ncp_filp = ncp_filp;
server->ncp_sock = sock;
if (data.info_fd != -1) {
- struct socket *info_sock;
-
- error = -EBADF;
- server->info_filp = fget(data.info_fd);
- if (!server->info_filp)
- goto out_bdi;
- error = -ENOTSOCK;
- sock_inode = file_inode(server->info_filp);
- if (!S_ISSOCK(sock_inode->i_mode))
- goto out_fput2;
- info_sock = SOCKET_I(sock_inode);
+ struct socket *info_sock = sockfd_lookup(data.info_fd, &error);
if (!info_sock)
- goto out_fput2;
+ goto out_bdi;
+ server->info_sock = info_sock;
error = -EBADFD;
if (info_sock->type != SOCK_STREAM)
goto out_fput2;
- server->info_sock = info_sock;
}
/* server->lock = 0; */
now because of PATH_MAX changes.. */
if (server->m.time_out < 1) {
server->m.time_out = 10;
- printk(KERN_INFO "You need to recompile your ncpfs utils..\n");
+ pr_info("You need to recompile your ncpfs utils..\n");
}
server->m.time_out = server->m.time_out * HZ / 100;
server->m.file_mode = (server->m.file_mode & S_IRWXUGO) | S_IFREG;
ncp_unlock_server(server);
if (error < 0)
goto out_rxbuf;
- DPRINTK("ncp_fill_super: NCP_SBP(sb) = %x\n", (int) NCP_SBP(sb));
+ ncp_dbg(1, "NCP_SBP(sb) = %p\n", NCP_SBP(sb));
error = -EMSGSIZE; /* -EREMOTESIDEINCOMPATIBLE */
#ifdef CONFIG_NCPFS_PACKET_SIGNING
if (ncp_negotiate_buffersize(server, default_bufsize,
&(server->buffer_size)) != 0)
goto out_disconnect;
- DPRINTK("ncpfs: bufsize = %d\n", server->buffer_size);
+ ncp_dbg(1, "bufsize = %d\n", server->buffer_size);
memset(&finfo, 0, sizeof(finfo));
finfo.i.attributes = aDIR;
root_inode = ncp_iget(sb, &finfo);
if (!root_inode)
goto out_disconnect;
- DPRINTK("ncp_fill_super: root vol=%d\n", NCP_FINFO(root_inode)->volNumber);
+ ncp_dbg(1, "root vol=%d\n", NCP_FINFO(root_inode)->volNumber);
sb->s_root = d_make_root(root_inode);
if (!sb->s_root)
goto out_disconnect;
mutex_destroy(&server->root_setup_lock);
mutex_destroy(&server->mutex);
out_fput2:
- if (server->info_filp)
- fput(server->info_filp);
+ if (server->info_sock)
+ sockfd_put(server->info_sock);
out_bdi:
bdi_destroy(&server->bdi);
out_fput:
- /* 23/12/1998 Marcin Dalecki <dalecki@cs.net.pl>:
- *
- * The previously used put_filp(ncp_filp); was bogus, since
- * it doesn't perform proper unlocking.
- */
- fput(ncp_filp);
+ sockfd_put(sock);
out:
put_pid(data.wdog_pid);
sb->s_fs_info = NULL;
mutex_destroy(&server->root_setup_lock);
mutex_destroy(&server->mutex);
- if (server->info_filp)
- fput(server->info_filp);
- fput(server->ncp_filp);
+ if (server->info_sock)
+ sockfd_put(server->info_sock);
+ sockfd_put(server->ncp_sock);
kill_pid(server->m.wdog_pid, SIGTERM, 1);
put_pid(server->m.wdog_pid);
if ((attr->ia_valid & ATTR_SIZE) != 0) {
int written;
- DPRINTK("ncpfs: trying to change size to %ld\n",
- attr->ia_size);
+ ncp_dbg(1, "trying to change size to %llu\n", attr->ia_size);
if ((result = ncp_make_open(inode, O_WRONLY)) < 0) {
result = -EACCES;
static int __init init_ncp_fs(void)
{
int err;
- DPRINTK("ncpfs: init_ncp_fs called\n");
+ ncp_dbg(1, "called\n");
err = init_inodecache();
if (err)
static void __exit exit_ncp_fs(void)
{
- DPRINTK("ncpfs: exit_ncp_fs called\n");
+ ncp_dbg(1, "called\n");
unregister_filesystem(&ncp_fs_type);
destroy_inodecache();
}
return -EFAULT;
if (info.version != NCP_GET_FS_INFO_VERSION) {
- DPRINTK("info.version invalid: %d\n", info.version);
+ ncp_dbg(1, "info.version invalid: %d\n", info.version);
return -EINVAL;
}
/* TODO: info.addr = server->m.serv_addr; */
return -EFAULT;
if (info2.version != NCP_GET_FS_INFO_VERSION_V2) {
- DPRINTK("info.version invalid: %d\n", info2.version);
+ ncp_dbg(1, "info.version invalid: %d\n", info2.version);
return -EINVAL;
}
info2.mounted_uid = from_kuid_munged(current_user_ns(), server->m.mounted_uid);
return -EFAULT;
if (info2.version != NCP_GET_FS_INFO_VERSION_V2) {
- DPRINTK("info.version invalid: %d\n", info2.version);
+ ncp_dbg(1, "info.version invalid: %d\n", info2.version);
return -EINVAL;
}
info2.mounted_uid = from_kuid_munged(current_user_ns(), server->m.mounted_uid);
else
result = server->reply_size;
ncp_unlock_server(server);
- DPRINTK("ncp_ioctl: copy %d bytes\n",
- result);
+ ncp_dbg(1, "copy %d bytes\n", result);
if (result >= 0)
if (copy_to_user(request.data, bouncebuffer, result))
result = -EFAULT;
sr.namespace = server->name_space[sr.volNumber];
result = 0;
} else
- DPRINTK("ncpfs: s_root->d_inode==NULL\n");
+ ncp_dbg(1, "s_root->d_inode==NULL\n");
} else
- DPRINTK("ncpfs: s_root==NULL\n");
+ ncp_dbg(1, "s_root==NULL\n");
} else {
sr.volNumber = -1;
sr.namespace = 0;
NCP_FINFO(s_inode)->DosDirNum = dosde;
server->root_setuped = 1;
} else {
- DPRINTK("ncpfs: s_root->d_inode==NULL\n");
+ ncp_dbg(1, "s_root->d_inode==NULL\n");
result = -EIO;
}
} else {
- DPRINTK("ncpfs: s_root==NULL\n");
+ ncp_dbg(1, "s_root==NULL\n");
result = -EIO;
}
}
{
struct inode *inode = file_inode(file);
- DPRINTK("ncp_mmap: called\n");
+ ncp_dbg(1, "called\n");
if (!ncp_conn_valid(NCP_SERVER(inode)))
return -EIO;
#include "ncp_fs_i.h"
#include "ncp_fs_sb.h"
-/* define because it is easy to change PRINTK to {*}PRINTK */
-#define PRINTK(format, args...) printk(KERN_DEBUG format , ## args)
-
#undef NCPFS_PARANOIA
#ifdef NCPFS_PARANOIA
-#define PPRINTK(format, args...) PRINTK(format , ## args)
+#define ncp_vdbg(fmt, ...) \
+ pr_debug(fmt, ##__VA_ARGS__)
#else
-#define PPRINTK(format, args...)
+#define ncp_vdbg(fmt, ...) \
+do { \
+ if (0) \
+ pr_debug(fmt, ##__VA_ARGS__); \
+} while (0)
#endif
#ifndef DEBUG_NCP
#define DEBUG_NCP 0
#endif
-#if DEBUG_NCP > 0
-#define DPRINTK(format, args...) PRINTK(format , ## args)
-#else
-#define DPRINTK(format, args...)
-#endif
-#if DEBUG_NCP > 1
-#define DDPRINTK(format, args...) PRINTK(format , ## args)
-#else
-#define DDPRINTK(format, args...)
+
+#if DEBUG_NCP > 0 && !defined(DEBUG)
+#define DEBUG
#endif
+#define ncp_dbg(level, fmt, ...) \
+do { \
+ if (level <= DEBUG_NCP) \
+ pr_debug(fmt, ##__VA_ARGS__); \
+} while (0)
+
#define NCP_MAX_RPC_TIMEOUT (6*HZ)
__u8 name_space[NCP_NUMBER_OF_VOLUMES + 2];
- struct file *ncp_filp; /* File pointer to ncp socket */
struct socket *ncp_sock;/* ncp socket */
- struct file *info_filp;
struct socket *info_sock;
u8 sequence;
*
*/
-
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include "ncp_fs.h"
static inline void assert_server_locked(struct ncp_server *server)
{
if (server->lock == 0) {
- DPRINTK("ncpfs: server not locked!\n");
+ ncp_dbg(1, "server not locked!\n");
}
}
int len = strlen(s);
assert_server_locked(server);
if (len > 255) {
- DPRINTK("ncpfs: string too long: %s\n", s);
+ ncp_dbg(1, "string too long: %s\n", s);
len = 255;
}
ncp_add_byte(server, len);
result = -EIO;
len = ncp_reply_byte(server, 29);
if (len > NCP_VOLNAME_LEN) {
- DPRINTK("ncpfs: volume name too long: %d\n", len);
+ ncp_dbg(1, "volume name too long: %d\n", len);
goto out;
}
memcpy(&(target->volume_name), ncp_reply_data(server, 30), len);
result = -EIO;
len = ncp_reply_byte(server, 21);
if (len > NCP_VOLNAME_LEN) {
- DPRINTK("ncpfs: volume name too long: %d\n", len);
+ ncp_dbg(1, "volume name too long: %d\n", len);
goto out;
}
memcpy(&(target->volume_name), ncp_reply_data(server, 22), len);
err = ncp_close_file(NCP_SERVER(inode), NCP_FINFO(inode)->file_handle);
if (!err)
- PPRINTK("ncp_make_closed: volnum=%d, dirent=%u, error=%d\n",
- NCP_FINFO(inode)->volNumber,
- NCP_FINFO(inode)->dirEntNum, err);
+ ncp_vdbg("volnum=%d, dirent=%u, error=%d\n",
+ NCP_FINFO(inode)->volNumber,
+ NCP_FINFO(inode)->dirEntNum, err);
}
mutex_unlock(&NCP_FINFO(inode)->open_mutex);
return err;
if ((result = ncp_request(server, 87)) == 0) {
ncp_extract_nfs_info(ncp_reply_data(server, 0), &target->nfs);
- DPRINTK(KERN_DEBUG
- "ncp_obtain_nfs_info: (%s) mode=0%o, rdev=0x%x\n",
+ ncp_dbg(1, "(%s) mode=0%o, rdev=0x%x\n",
target->entryName, target->nfs.mode,
target->nfs.rdev);
} else {
int result;
if (target == NULL) {
- printk(KERN_ERR "ncp_obtain_info: invalid call\n");
+ pr_err("%s: invalid call\n", __func__);
return -EINVAL;
}
ncp_init_request(server);
namespace = ncp_reply_data(server, 2);
while (no_namespaces > 0) {
- DPRINTK("get_namespaces: found %d on %d\n", *namespace, volume);
+ ncp_dbg(1, "found %d on %d\n", *namespace, volume);
#ifdef CONFIG_NCPFS_NFS_NS
if ((*namespace == NW_NS_NFS) && !(server->m.flags&NCP_MOUNT_NO_NFS))
if (ret_ns)
*ret_ns = ns;
- DPRINTK("lookup_vol: namespace[%d] = %d\n",
- volume, server->name_space[volume]);
+ ncp_dbg(1, "namespace[%d] = %d\n", volume, server->name_space[volume]);
if (server->name_space[volume] == ns)
return 0;
{
int result;
- DPRINTK("ncp_get_volume_root: looking up vol %s\n", volname);
+ ncp_dbg(1, "looking up vol %s\n", volname);
ncp_init_request(server);
ncp_add_byte(server, 22); /* Subfunction: Generate dir handle */
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/time.h>
#include <linux/errno.h>
return;
if (result < 0) {
- printk(KERN_ERR "ncpfs: tcp: Send failed: %d\n", result);
+ pr_err("tcp: Send failed: %d\n", result);
__ncp_abort_request(server, rq, result);
return;
}
mutex_lock(&server->rcv.creq_mutex);
if (!ncp_conn_valid(server)) {
mutex_unlock(&server->rcv.creq_mutex);
- printk(KERN_ERR "ncpfs: tcp: Server died\n");
+ pr_err("tcp: Server died\n");
return -EIO;
}
ncp_req_get(req);
}
result = _recv(sock, buf, sizeof(buf), MSG_DONTWAIT);
if (result < 0) {
- DPRINTK("recv failed with %d\n", result);
+ ncp_dbg(1, "recv failed with %d\n", result);
continue;
}
if (result < 10) {
- DPRINTK("too short (%u) watchdog packet\n", result);
+ ncp_dbg(1, "too short (%u) watchdog packet\n", result);
continue;
}
if (buf[9] != '?') {
- DPRINTK("bad signature (%02X) in watchdog packet\n", buf[9]);
+ ncp_dbg(1, "bad signature (%02X) in watchdog packet\n", buf[9]);
continue;
}
buf[9] = 'Y';
result -= 8;
hdrl = sock->sk->sk_family == AF_INET ? 8 : 6;
if (sign_verify_reply(server, server->rxbuf + hdrl, result - hdrl, cpu_to_le32(result), server->rxbuf + result)) {
- printk(KERN_INFO "ncpfs: Signature violation\n");
+ pr_info("Signature violation\n");
result = -EIO;
}
}
return result;
}
if (result > len) {
- printk(KERN_ERR "ncpfs: tcp: bug in recvmsg (%u > %Zu)\n", result, len);
+ pr_err("tcp: bug in recvmsg (%u > %Zu)\n", result, len);
return -EIO;
}
return result;
__ncptcp_abort(server);
}
if (result < 0) {
- printk(KERN_ERR "ncpfs: tcp: error in recvmsg: %d\n", result);
+ pr_err("tcp: error in recvmsg: %d\n", result);
} else {
- DPRINTK(KERN_ERR "ncpfs: tcp: EOF\n");
+ ncp_dbg(1, "tcp: EOF\n");
}
return -EIO;
}
switch (server->rcv.state) {
case 0:
if (server->rcv.buf.magic != htonl(NCP_TCP_RCVD_MAGIC)) {
- printk(KERN_ERR "ncpfs: tcp: Unexpected reply type %08X\n", ntohl(server->rcv.buf.magic));
+ pr_err("tcp: Unexpected reply type %08X\n", ntohl(server->rcv.buf.magic));
__ncptcp_abort(server);
return -EIO;
}
datalen = ntohl(server->rcv.buf.len) & 0x0FFFFFFF;
if (datalen < 10) {
- printk(KERN_ERR "ncpfs: tcp: Unexpected reply len %d\n", datalen);
+ pr_err("tcp: Unexpected reply len %d\n", datalen);
__ncptcp_abort(server);
return -EIO;
}
#ifdef CONFIG_NCPFS_PACKET_SIGNING
if (server->sign_active) {
if (datalen < 18) {
- printk(KERN_ERR "ncpfs: tcp: Unexpected reply len %d\n", datalen);
+ pr_err("tcp: Unexpected reply len %d\n", datalen);
__ncptcp_abort(server);
return -EIO;
}
server->rcv.len = datalen - 10;
break;
}
- DPRINTK("ncpfs: tcp: Unexpected NCP type %02X\n", type);
+ ncp_dbg(1, "tcp: Unexpected NCP type %02X\n", type);
skipdata2:;
server->rcv.state = 2;
skipdata:;
}
req = server->rcv.creq;
if (!req) {
- DPRINTK(KERN_ERR "ncpfs: Reply without appropriate request\n");
+ ncp_dbg(1, "Reply without appropriate request\n");
goto skipdata2;
}
if (datalen > req->datalen + 8) {
- printk(KERN_ERR "ncpfs: tcp: Unexpected reply len %d (expected at most %Zd)\n", datalen, req->datalen + 8);
+ pr_err("tcp: Unexpected reply len %d (expected at most %Zd)\n", datalen, req->datalen + 8);
server->rcv.state = 3;
goto skipdata;
}
req = server->rcv.creq;
if (req->tx_type != NCP_ALLOC_SLOT_REQUEST) {
if (((struct ncp_reply_header*)server->rxbuf)->sequence != server->sequence) {
- printk(KERN_ERR "ncpfs: tcp: Bad sequence number\n");
+ pr_err("tcp: Bad sequence number\n");
__ncp_abort_request(server, req, -EIO);
return -EIO;
}
if ((((struct ncp_reply_header*)server->rxbuf)->conn_low | (((struct ncp_reply_header*)server->rxbuf)->conn_high << 8)) != server->connection) {
- printk(KERN_ERR "ncpfs: tcp: Connection number mismatch\n");
+ pr_err("tcp: Connection number mismatch\n");
__ncp_abort_request(server, req, -EIO);
return -EIO;
}
#ifdef CONFIG_NCPFS_PACKET_SIGNING
if (server->sign_active && req->tx_type != NCP_DEALLOC_SLOT_REQUEST) {
if (sign_verify_reply(server, server->rxbuf + 6, req->datalen - 6, cpu_to_be32(req->datalen + 16), &server->rcv.buf.type)) {
- printk(KERN_ERR "ncpfs: tcp: Signature violation\n");
+ pr_err("tcp: Signature violation\n");
__ncp_abort_request(server, req, -EIO);
return -EIO;
}
int result;
if (server->lock == 0) {
- printk(KERN_ERR "ncpfs: Server not locked!\n");
+ pr_err("Server not locked!\n");
return -EIO;
}
if (!ncp_conn_valid(server)) {
spin_unlock_irqrestore(¤t->sighand->siglock, flags);
}
- DDPRINTK("do_ncp_rpc_call returned %d\n", result);
+ ncp_dbg(2, "do_ncp_rpc_call returned %d\n", result);
return result;
}
result = ncp_do_request(server, server->current_size, reply, size);
if (result < 0) {
- DPRINTK("ncp_request_error: %d\n", result);
+ ncp_dbg(1, "ncp_request_error: %d\n", result);
goto out;
}
server->completion = reply->completion_code;
result = reply->completion_code;
if (result != 0)
- PPRINTK("ncp_request: completion code=%x\n", result);
+ ncp_vdbg("completion code=%x\n", result);
out:
return result;
}
{
mutex_lock(&server->mutex);
if (server->lock)
- printk(KERN_WARNING "ncp_lock_server: was locked!\n");
+ pr_warn("%s: was locked!\n", __func__);
server->lock = 1;
}
void ncp_unlock_server(struct ncp_server *server)
{
if (!server->lock) {
- printk(KERN_WARNING "ncp_unlock_server: was not locked!\n");
+ pr_warn("%s: was not locked!\n", __func__);
return;
}
server->lock = 0;
__le32 attr;
unsigned int hdr;
- DPRINTK("ncp_symlink(dir=%p,dentry=%p,symname=%s)\n",dir,dentry,symname);
+ ncp_dbg(1, "dir=%p, dentry=%p, symname=%s\n", dir, dentry, symname);
if (ncp_is_nfs_extras(NCP_SERVER(dir), NCP_FINFO(dir)->volNumber))
kludge = 0;
struct svc_fh;
struct svc_rqst;
-/* Maximum ACL we'll accept from client; chosen (somewhat arbitrarily) to
- * fit in a page: */
-#define NFS4_ACL_MAX 170
+/*
+ * Maximum ACL we'll accept from a client; chosen (somewhat
+ * arbitrarily) so that kmalloc'ing the ACL shouldn't require a
+ * high-order allocation. This allows 204 ACEs on x86_64:
+ */
+#define NFS4_ACL_MAX ((PAGE_SIZE - sizeof(struct nfs4_acl)) \
+ / sizeof(struct nfs4_ace))
struct nfs4_acl *nfs4_acl_new(int);
int nfs4_acl_get_whotype(char *, u32);
* up setting a 3-element effective posix ACL with all
* permissions zero.
*/
- nace = 4 + state->users->n + state->groups->n;
+ if (!state->users->n && !state->groups->n)
+ nace = 3;
+ else /* Note we also include a MASK ACE in this case: */
+ nace = 4 + state->users->n + state->groups->n;
pacl = posix_acl_alloc(nace, GFP_KERNEL);
if (!pacl)
return ERR_PTR(-ENOMEM);
add_to_mask(state, &state->groups->aces[i].perms);
}
- pace++;
- pace->e_tag = ACL_MASK;
- low_mode_from_nfs4(state->mask.allow, &pace->e_perm, flags);
+ if (!state->users->n && !state->groups->n) {
+ pace++;
+ pace->e_tag = ACL_MASK;
+ low_mode_from_nfs4(state->mask.allow, &pace->e_perm, flags);
+ }
pace++;
pace->e_tag = ACL_OTHER;
*/
#include <linux/sunrpc/clnt.h>
+#include <linux/sunrpc/xprt.h>
#include <linux/sunrpc/svc_xprt.h>
#include <linux/slab.h>
#include "nfsd.h"
}
}
+static struct rpc_clnt *create_backchannel_client(struct rpc_create_args *args)
+{
+ struct rpc_xprt *xprt;
+
+ if (args->protocol != XPRT_TRANSPORT_BC_TCP)
+ return rpc_create(args);
+
+ xprt = args->bc_xprt->xpt_bc_xprt;
+ if (xprt) {
+ xprt_get(xprt);
+ return rpc_create_xprt(args, xprt);
+ }
+
+ return rpc_create(args);
+}
+
static int setup_callback_client(struct nfs4_client *clp, struct nfs4_cb_conn *conn, struct nfsd4_session *ses)
{
struct rpc_timeout timeparms = {
args.authflavor = ses->se_cb_sec.flavor;
}
/* Create RPC client */
- client = rpc_create(&args);
+ client = create_backchannel_client(&args);
if (IS_ERR(client)) {
dprintk("NFSD: couldn't create callback client: %ld\n",
PTR_ERR(client));
struct nfsd4_op *op;
struct nfsd4_operation *opdesc;
struct nfsd4_compound_state *cstate = &resp->cstate;
+ struct svc_fh *current_fh = &cstate->current_fh;
+ struct svc_fh *save_fh = &cstate->save_fh;
int slack_bytes;
u32 plen = 0;
__be32 status;
resp->tag = args->tag;
resp->opcnt = 0;
resp->rqstp = rqstp;
- resp->cstate.minorversion = args->minorversion;
- resp->cstate.replay_owner = NULL;
- resp->cstate.session = NULL;
- fh_init(&resp->cstate.current_fh, NFS4_FHSIZE);
- fh_init(&resp->cstate.save_fh, NFS4_FHSIZE);
+ cstate->minorversion = args->minorversion;
+ cstate->replay_owner = NULL;
+ cstate->session = NULL;
+ fh_init(current_fh, NFS4_FHSIZE);
+ fh_init(save_fh, NFS4_FHSIZE);
/*
* Don't use the deferral mechanism for NFSv4; compounds make it
* too hard to avoid non-idempotency problems.
opdesc = OPDESC(op);
- if (!cstate->current_fh.fh_dentry) {
+ if (!current_fh->fh_dentry) {
if (!(opdesc->op_flags & ALLOWED_WITHOUT_FH)) {
op->status = nfserr_nofilehandle;
goto encode_op;
}
- } else if (cstate->current_fh.fh_export->ex_fslocs.migrated &&
+ } else if (current_fh->fh_export->ex_fslocs.migrated &&
!(opdesc->op_flags & ALLOWED_ON_ABSENT_FS)) {
op->status = nfserr_moved;
goto encode_op;
}
+ fh_clear_wcc(current_fh);
+
/* If op is non-idempotent */
if (opdesc->op_flags & OP_MODIFIES_SOMETHING) {
plen = opdesc->op_rsize_bop(rqstp, op);
+ /*
+ * If there's still another operation, make sure
+ * we'll have space to at least encode an error:
+ */
+ if (resp->opcnt < args->opcnt)
+ plen += COMPOUND_ERR_SLACK_SPACE;
op->status = nfsd4_check_resp_size(resp, plen);
}
clear_current_stateid(cstate);
if (need_wrongsec_check(rqstp))
- op->status = check_nfsd_access(cstate->current_fh.fh_export, rqstp);
+ op->status = check_nfsd_access(current_fh->fh_export, rqstp);
}
encode_op:
/* Only from SEQUENCE */
- if (resp->cstate.status == nfserr_replay_cache) {
+ if (cstate->status == nfserr_replay_cache) {
dprintk("%s NFS4.1 replay from cache\n", __func__);
status = op->status;
goto out;
nfsd4_increment_op_stats(op->opnum);
}
- resp->cstate.status = status;
- fh_put(&resp->cstate.current_fh);
- fh_put(&resp->cstate.save_fh);
- BUG_ON(resp->cstate.replay_owner);
+ cstate->status = status;
+ fh_put(current_fh);
+ fh_put(save_fh);
+ BUG_ON(cstate->replay_owner);
out:
/* Reset deferral mechanism for RPC deferrals */
rqstp->rq_usedeferral = 1;
static inline u32 nfsd4_setclientid_rsize(struct svc_rqst *rqstp, struct nfsd4_op *op)
{
- return (op_encode_hdr_size + 2 + 1024) * sizeof(__be32);
+ return (op_encode_hdr_size + 2 + XDR_QUADLEN(NFS4_VERIFIER_SIZE)) *
+ sizeof(__be32);
}
static inline u32 nfsd4_write_rsize(struct svc_rqst *rqstp, struct nfsd4_op *op)
}
/*
- * Cache a reply. nfsd4_check_drc_limit() has bounded the cache size.
+ * Cache a reply. nfsd4_check_resp_size() has bounded the cache size.
*/
void
nfsd4_store_cache_entry(struct nfsd4_compoundres *resp)
* The sequence operation is not cached because we can use the slot and
* session values.
*/
-__be32
+static __be32
nfsd4_replay_cache_entry(struct nfsd4_compoundres *resp,
struct nfsd4_sequence *seq)
{
dprintk("--> %s slot %p\n", __func__, slot);
- /* Either returns 0 or nfserr_retry_uncached */
status = nfsd4_enc_sequence_replay(resp->rqstp->rq_argp, resp);
- if (status == nfserr_retry_uncached_rep)
+ if (status)
return status;
/* The sequence operation has been encoded, cstate->datap set. */
if (!list_empty(&clp->cl_revoked))
seq->status_flags |= SEQ4_STATUS_RECALLABLE_STATE_REVOKED;
out_no_session:
- kfree(conn);
+ if (conn)
+ free_conn(conn);
spin_unlock(&nn->client_lock);
return status;
out_put_session:
return nfserr_bad_stateid;
status = lookup_clientid(&stateid->si_opaque.so_clid, sessions,
nn, &cl);
- if (status == nfserr_stale_clientid)
+ if (status == nfserr_stale_clientid) {
+ if (sessions)
+ return nfserr_bad_stateid;
return nfserr_stale_stateid;
+ }
if (status)
return status;
*s = find_stateid_by_type(cl, stateid, typemask);
int i;
struct nfs4_client *clp = NULL;
struct nfsd_net *nn = net_generic(net, nfsd_net_id);
- struct rb_node *node, *tmp;
for (i = 0; i < CLIENT_HASH_SIZE; i++) {
while (!list_empty(&nn->conf_id_hashtbl[i])) {
}
}
- node = rb_first(&nn->unconf_name_tree);
- while (node != NULL) {
- tmp = node;
- node = rb_next(tmp);
- clp = rb_entry(tmp, struct nfs4_client, cl_namenode);
- rb_erase(tmp, &nn->unconf_name_tree);
- destroy_client(clp);
+ for (i = 0; i < CLIENT_HASH_SIZE; i++) {
+ while (!list_empty(&nn->unconf_id_hashtbl[i])) {
+ clp = list_entry(nn->unconf_id_hashtbl[i].next, struct nfs4_client, cl_idhash);
+ destroy_client(clp);
+ }
}
kfree(nn->sessionid_hashtbl);
READ32(nace);
if (nace > NFS4_ACL_MAX)
- return nfserr_resource;
+ return nfserr_fbig;
*acl = nfs4_acl_new(nace);
if (*acl == NULL)
}
write->wr_head.iov_base = p;
write->wr_head.iov_len = avail;
- WARN_ON(avail != (XDR_QUADLEN(avail) << 2));
write->wr_pagelist = argp->pagelist;
len = XDR_QUADLEN(write->wr_buflen) << 2;
goto out;
}
if (bmval2 & FATTR4_WORD2_SUPPATTR_EXCLCREAT) {
+ if ((buflen -= 16) < 0)
+ goto out_resource;
WRITE32(3);
WRITE32(NFSD_SUPPATTR_EXCLCREAT_WORD0);
WRITE32(NFSD_SUPPATTR_EXCLCREAT_WORD1);
security_release_secctx(context, contextlen);
#endif /* CONFIG_NFSD_V4_SECURITY_LABEL */
kfree(acl);
- if (tempfh)
+ if (tempfh) {
fh_put(tempfh);
+ kfree(tempfh);
+ }
return status;
out_nfserr:
status = nfserrno(err);
struct nfsd4_test_stateid_id *stateid, *next;
__be32 *p;
+ if (nfserr)
+ return nfserr;
+
RESERVE_SPACE(4 + (4 * test_stateid->ts_num_ids));
*p++ = htonl(test_stateid->ts_num_ids);
return 0;
session = resp->cstate.session;
- if (session == NULL)
- return 0;
if (xb->page_len == 0) {
length = (char *)resp->p - (char *)xb->head[0].iov_base + pad;
BUG_ON(op->opnum < 0 || op->opnum >= ARRAY_SIZE(nfsd4_enc_ops) ||
!nfsd4_enc_ops[op->opnum]);
op->status = nfsd4_enc_ops[op->opnum](resp, op->status, &op->u);
- /* nfsd4_check_drc_limit guarantees enough room for error status */
+ /* nfsd4_check_resp_size guarantees enough room for error status */
if (!op->status)
op->status = nfsd4_check_resp_size(resp, 0);
+ if (op->status == nfserr_resource && nfsd4_has_session(&resp->cstate)) {
+ struct nfsd4_slot *slot = resp->cstate.slot;
+
+ if (slot->sl_flags & NFSD4_SLOT_CACHETHIS)
+ op->status = nfserr_rep_too_big_to_cache;
+ else
+ op->status = nfserr_rep_too_big;
+ }
if (so) {
so->so_replay.rp_status = op->status;
so->so_replay.rp_buflen = (char *)resp->p - (char *)(statp+1);
int
nfs4svc_decode_compoundargs(struct svc_rqst *rqstp, __be32 *p, struct nfsd4_compoundargs *args)
{
+ if (rqstp->rq_arg.head[0].iov_len % 4) {
+ /* client is nuts */
+ dprintk("%s: compound not properly padded! (peeraddr=%pISc xid=0x%x)",
+ __func__, svc_addr(rqstp), be32_to_cpu(rqstp->rq_xid));
+ return 0;
+ }
args->p = p;
args->end = rqstp->rq_arg.head[0].iov_base + rqstp->rq_arg.head[0].iov_len;
args->pagelist = rqstp->rq_arg.pages;
if (err != 0 || fd < 0)
return -EINVAL;
+ if (svc_alien_sock(net, fd)) {
+ printk(KERN_ERR "%s: socket net is different to NFSd's one\n", __func__);
+ return -EINVAL;
+ }
+
err = nfsd_create_serv(net);
if (err != 0)
return err;
* reason.
*/
#define COMPOUND_SLACK_SPACE 140 /* OP_GETFH */
-#define COMPOUND_ERR_SLACK_SPACE 12 /* OP_SETATTR */
+#define COMPOUND_ERR_SLACK_SPACE 16 /* OP_SETATTR */
#define NFSD_LAUNDROMAT_MINTIMEOUT 1 /* seconds */
}
#ifdef CONFIG_NFSD_V3
+/*
+ * The wcc data stored in current_fh should be cleared
+ * between compound ops.
+ */
+static inline void
+fh_clear_wcc(struct svc_fh *fhp)
+{
+ fhp->fh_post_saved = 0;
+ fhp->fh_pre_saved = 0;
+}
+
/*
* Fill in the pre_op attr for the wcc data
*/
extern void fill_post_wcc(struct svc_fh *);
#else
-#define fill_pre_wcc(ignored)
+#define fh_clear_wcc(ignored)
+#define fill_pre_wcc(ignored)
#define fill_post_wcc(notused)
#endif /* CONFIG_NFSD_V3 */
type = (stat->mode & S_IFMT);
*p++ = htonl(nfs_ftypes[type >> 12]);
- *p++ = htonl((u32) (stat->mode & S_IALLUGO));
+ *p++ = htonl((u32) stat->mode);
*p++ = htonl((u32) stat->nlink);
*p++ = htonl((u32) from_kuid(&init_user_ns, stat->uid));
*p++ = htonl((u32) from_kgid(&init_user_ns, stat->gid));
umode_t ftype = 0;
__be32 err;
int host_err;
+ bool get_write_count;
int size_change = 0;
if (iap->ia_valid & (ATTR_ATIME | ATTR_MTIME | ATTR_SIZE))
if (iap->ia_valid & ATTR_SIZE)
ftype = S_IFREG;
+ /* Callers that do fh_verify should do the fh_want_write: */
+ get_write_count = !fhp->fh_dentry;
+
/* Get inode */
err = fh_verify(rqstp, fhp, ftype, accmode);
if (err)
goto out;
+ if (get_write_count) {
+ host_err = fh_want_write(fhp);
+ if (host_err)
+ return nfserrno(host_err);
+ }
dentry = fhp->fh_dentry;
inode = dentry->d_inode;
dput(odentry);
out_nfserr:
err = nfserrno(host_err);
-
- /* we cannot reply on fh_unlock on the two filehandles,
+ /*
+ * We cannot rely on fh_unlock on the two filehandles,
* as that would do the wrong thing if the two directories
- * were the same, so again we do it by hand
+ * were the same, so again we do it by hand.
*/
fill_post_wcc(ffhp);
fill_post_wcc(tfhp);
struct nfsd4_compound_state *,
struct nfsd4_setclientid_confirm *setclientid_confirm);
extern void nfsd4_store_cache_entry(struct nfsd4_compoundres *resp);
-extern __be32 nfsd4_replay_cache_entry(struct nfsd4_compoundres *resp,
- struct nfsd4_sequence *seq);
extern __be32 nfsd4_exchange_id(struct svc_rqst *rqstp,
struct nfsd4_compound_state *, struct nfsd4_exchange_id *);
extern __be32 nfsd4_backchannel_ctl(struct svc_rqst *, struct nfsd4_compound_state *, struct nfsd4_backchannel_ctl *);
iput(bvi);
skip_large_index_stuff:
/* Setup the operations for this index inode. */
- vi->i_op = NULL;
- vi->i_fop = NULL;
vi->i_mapping->a_ops = &ntfs_mst_aops;
vi->i_blocks = ni->allocated_size >> 9;
/*
static int o2net_recv_tcp_msg(struct socket *sock, void *data, size_t len)
{
- int ret;
- mm_segment_t oldfs;
- struct kvec vec = {
- .iov_len = len,
- .iov_base = data,
- };
- struct msghdr msg = {
- .msg_iovlen = 1,
- .msg_iov = (struct iovec *)&vec,
- .msg_flags = MSG_DONTWAIT,
- };
-
- oldfs = get_fs();
- set_fs(get_ds());
- ret = sock_recvmsg(sock, &msg, len, msg.msg_flags);
- set_fs(oldfs);
-
- return ret;
+ struct kvec vec = { .iov_len = len, .iov_base = data, };
+ struct msghdr msg = { .msg_flags = MSG_DONTWAIT, };
+ return kernel_recvmsg(sock, &msg, &vec, 1, len, msg.msg_flags);
}
static int o2net_send_tcp_msg(struct socket *sock, struct kvec *vec,
size_t veclen, size_t total)
{
int ret;
- mm_segment_t oldfs;
- struct msghdr msg = {
- .msg_iov = (struct iovec *)vec,
- .msg_iovlen = veclen,
- };
+ struct msghdr msg;
if (sock == NULL) {
ret = -EINVAL;
goto out;
}
- oldfs = get_fs();
- set_fs(get_ds());
- ret = sock_sendmsg(sock, &msg, total);
- set_fs(oldfs);
- if (ret != total) {
- mlog(ML_ERROR, "sendmsg returned %d instead of %zu\n", ret,
- total);
- if (ret >= 0)
- ret = -EPIPE; /* should be smarter, I bet */
- goto out;
- }
-
- ret = 0;
+ ret = kernel_sendmsg(sock, &msg, vec, veclen, total);
+ if (likely(ret == total))
+ return 0;
+ mlog(ML_ERROR, "sendmsg returned %d instead of %zu\n", ret, total);
+ if (ret >= 0)
+ ret = -EPIPE; /* should be smarter, I bet */
out:
- if (ret < 0)
- mlog(0, "returning error: %d\n", ret);
+ mlog(0, "returning error: %d\n", ret);
return ret;
}
if (direct_io) {
written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
- ppos, count, ocount);
+ count, ocount);
if (written < 0) {
ret = written;
goto out_dio;
}
} else {
+ struct iov_iter from;
+ iov_iter_init(&from, iov, nr_segs, count, 0);
current->backing_dev_info = file->f_mapping->backing_dev_info;
- written = generic_file_buffered_write(iocb, iov, nr_segs, *ppos,
- ppos, count, 0);
+ written = generic_perform_write(file, &from, *ppos);
+ if (likely(written >= 0))
+ iocb->ki_pos = *ppos + written;
current->backing_dev_info = NULL;
}
return error;
}
-/*
- * You have to be very careful that these write
- * counts get cleaned up in error cases and
- * upon __fput(). This should probably never
- * be called outside of __dentry_open().
- */
-static inline int __get_file_write_access(struct inode *inode,
- struct vfsmount *mnt)
-{
- int error;
- error = get_write_access(inode);
- if (error)
- return error;
- /*
- * Do not take mount writer counts on
- * special files since no writes to
- * the mount itself will occur.
- */
- if (!special_file(inode->i_mode)) {
- /*
- * Balanced in __fput()
- */
- error = __mnt_want_write(mnt);
- if (error)
- put_write_access(inode);
- }
- return error;
-}
-
int open_check_o_direct(struct file *f)
{
/* NB: we're sure to have correct a_ops only after f_op->open */
f->f_mode = OPEN_FMODE(f->f_flags) | FMODE_LSEEK |
FMODE_PREAD | FMODE_PWRITE;
- if (unlikely(f->f_flags & O_PATH))
- f->f_mode = FMODE_PATH;
-
path_get(&f->f_path);
inode = f->f_inode = f->f_path.dentry->d_inode;
- if (f->f_mode & FMODE_WRITE) {
- error = __get_file_write_access(inode, f->f_path.mnt);
- if (error)
- goto cleanup_file;
- if (!special_file(inode->i_mode))
- file_take_write(f);
- }
-
f->f_mapping = inode->i_mapping;
- if (unlikely(f->f_mode & FMODE_PATH)) {
+ if (unlikely(f->f_flags & O_PATH)) {
+ f->f_mode = FMODE_PATH;
f->f_op = &empty_fops;
return 0;
}
+ if (f->f_mode & FMODE_WRITE && !special_file(inode->i_mode)) {
+ error = get_write_access(inode);
+ if (unlikely(error))
+ goto cleanup_file;
+ error = __mnt_want_write(f->f_path.mnt);
+ if (unlikely(error)) {
+ put_write_access(inode);
+ goto cleanup_file;
+ }
+ f->f_mode |= FMODE_WRITER;
+ }
+
/* POSIX.1-2008/SUSv4 Section XSI 2.9.7 */
if (S_ISREG(inode->i_mode))
f->f_mode |= FMODE_ATOMIC_POS;
cleanup_all:
fops_put(f->f_op);
- if (f->f_mode & FMODE_WRITE) {
+ if (f->f_mode & FMODE_WRITER) {
put_write_access(inode);
- if (!special_file(inode->i_mode)) {
- /*
- * We don't consider this a real
- * mnt_want/drop_write() pair
- * because it all happenend right
- * here, so just reset the state.
- */
- file_reset_write(f);
- __mnt_drop_write(f->f_path.mnt);
- }
+ __mnt_drop_write(f->f_path.mnt);
}
cleanup_file:
path_put(&f->f_path);
return 0;
}
-static int
-pipe_iov_copy_to_user(struct iovec *iov, const void *from, unsigned long len,
- int atomic)
-{
- unsigned long copy;
-
- while (len > 0) {
- while (!iov->iov_len)
- iov++;
- copy = min_t(unsigned long, len, iov->iov_len);
-
- if (atomic) {
- if (__copy_to_user_inatomic(iov->iov_base, from, copy))
- return -EFAULT;
- } else {
- if (copy_to_user(iov->iov_base, from, copy))
- return -EFAULT;
- }
- from += copy;
- len -= copy;
- iov->iov_base += copy;
- iov->iov_len -= copy;
- }
- return 0;
-}
-
-/*
- * Attempt to pre-fault in the user memory, so we can use atomic copies.
- * Returns the number of bytes not faulted in.
- */
-static int iov_fault_in_pages_write(struct iovec *iov, unsigned long len)
-{
- while (!iov->iov_len)
- iov++;
-
- while (len > 0) {
- unsigned long this_len;
-
- this_len = min_t(unsigned long, len, iov->iov_len);
- if (fault_in_pages_writeable(iov->iov_base, this_len))
- break;
-
- len -= this_len;
- iov++;
- }
-
- return len;
-}
-
/*
* Pre-fault in the user memory, so we can use atomic copies.
*/
page_cache_release(page);
}
-/**
- * generic_pipe_buf_map - virtually map a pipe buffer
- * @pipe: the pipe that the buffer belongs to
- * @buf: the buffer that should be mapped
- * @atomic: whether to use an atomic map
- *
- * Description:
- * This function returns a kernel virtual address mapping for the
- * pipe_buffer passed in @buf. If @atomic is set, an atomic map is provided
- * and the caller has to be careful not to fault before calling
- * the unmap function.
- *
- * Note that this function calls kmap_atomic() if @atomic != 0.
- */
-void *generic_pipe_buf_map(struct pipe_inode_info *pipe,
- struct pipe_buffer *buf, int atomic)
-{
- if (atomic) {
- buf->flags |= PIPE_BUF_FLAG_ATOMIC;
- return kmap_atomic(buf->page);
- }
-
- return kmap(buf->page);
-}
-EXPORT_SYMBOL(generic_pipe_buf_map);
-
-/**
- * generic_pipe_buf_unmap - unmap a previously mapped pipe buffer
- * @pipe: the pipe that the buffer belongs to
- * @buf: the buffer that should be unmapped
- * @map_data: the data that the mapping function returned
- *
- * Description:
- * This function undoes the mapping that ->map() provided.
- */
-void generic_pipe_buf_unmap(struct pipe_inode_info *pipe,
- struct pipe_buffer *buf, void *map_data)
-{
- if (buf->flags & PIPE_BUF_FLAG_ATOMIC) {
- buf->flags &= ~PIPE_BUF_FLAG_ATOMIC;
- kunmap_atomic(map_data);
- } else
- kunmap(buf->page);
-}
-EXPORT_SYMBOL(generic_pipe_buf_unmap);
-
/**
* generic_pipe_buf_steal - attempt to take ownership of a &pipe_buffer
* @pipe: the pipe that the buffer belongs to
static const struct pipe_buf_operations anon_pipe_buf_ops = {
.can_merge = 1,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = anon_pipe_buf_release,
.steal = generic_pipe_buf_steal,
static const struct pipe_buf_operations packet_pipe_buf_ops = {
.can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = anon_pipe_buf_release,
.steal = generic_pipe_buf_steal,
ssize_t ret;
struct iovec *iov = (struct iovec *)_iov;
size_t total_len;
+ struct iov_iter iter;
total_len = iov_length(iov, nr_segs);
/* Null read succeeds. */
if (unlikely(total_len == 0))
return 0;
+ iov_iter_init(&iter, iov, nr_segs, total_len, 0);
+
do_wakeup = 0;
ret = 0;
__pipe_lock(pipe);
int curbuf = pipe->curbuf;
struct pipe_buffer *buf = pipe->bufs + curbuf;
const struct pipe_buf_operations *ops = buf->ops;
- void *addr;
size_t chars = buf->len;
- int error, atomic;
+ size_t written;
+ int error;
if (chars > total_len)
chars = total_len;
break;
}
- atomic = !iov_fault_in_pages_write(iov, chars);
-redo:
- addr = ops->map(pipe, buf, atomic);
- error = pipe_iov_copy_to_user(iov, addr + buf->offset, chars, atomic);
- ops->unmap(pipe, buf, addr);
- if (unlikely(error)) {
- /*
- * Just retry with the slow path if we failed.
- */
- if (atomic) {
- atomic = 0;
- goto redo;
- }
+ written = copy_page_to_iter(buf->page, buf->offset, chars, &iter);
+ if (unlikely(written < chars)) {
if (!ret)
- ret = error;
+ ret = -EFAULT;
break;
}
ret += chars;
iov_fault_in_pages_read(iov, chars);
redo1:
- addr = ops->map(pipe, buf, atomic);
+ if (atomic)
+ addr = kmap_atomic(buf->page);
+ else
+ addr = kmap(buf->page);
error = pipe_iov_copy_from_user(offset + addr, iov,
chars, atomic);
- ops->unmap(pipe, buf, addr);
+ if (atomic)
+ kunmap_atomic(addr);
+ else
+ kunmap(buf->page);
ret = error;
do_wakeup = 1;
if (error) {
}
}
-/*
- * return the source mount to be used for cloning
- *
- * @dest the current destination mount
- * @last_dest the last seen destination mount
- * @last_src the last seen source mount
- * @type return CL_SLAVE if the new mount has to be
- * cloned as a slave.
- */
-static struct mount *get_source(struct mount *dest,
- struct mount *last_dest,
- struct mount *last_src,
- int *type)
+static struct mount *next_group(struct mount *m, struct mount *origin)
{
- struct mount *p_last_src = NULL;
- struct mount *p_last_dest = NULL;
-
- while (last_dest != dest->mnt_master) {
- p_last_dest = last_dest;
- p_last_src = last_src;
- last_dest = last_dest->mnt_master;
- last_src = last_src->mnt_master;
+ while (1) {
+ while (1) {
+ struct mount *next;
+ if (!IS_MNT_NEW(m) && !list_empty(&m->mnt_slave_list))
+ return first_slave(m);
+ next = next_peer(m);
+ if (m->mnt_group_id == origin->mnt_group_id) {
+ if (next == origin)
+ return NULL;
+ } else if (m->mnt_slave.next != &next->mnt_slave)
+ break;
+ m = next;
+ }
+ /* m is the last peer */
+ while (1) {
+ struct mount *master = m->mnt_master;
+ if (m->mnt_slave.next != &master->mnt_slave_list)
+ return next_slave(m);
+ m = next_peer(master);
+ if (master->mnt_group_id == origin->mnt_group_id)
+ break;
+ if (master->mnt_slave.next == &m->mnt_slave)
+ break;
+ m = master;
+ }
+ if (m == origin)
+ return NULL;
}
+}
- if (p_last_dest) {
- do {
- p_last_dest = next_peer(p_last_dest);
- } while (IS_MNT_NEW(p_last_dest));
- /* is that a peer of the earlier? */
- if (dest == p_last_dest) {
- *type = CL_MAKE_SHARED;
- return p_last_src;
+/* all accesses are serialized by namespace_sem */
+static struct user_namespace *user_ns;
+static struct mount *last_dest, *last_source, *dest_master;
+static struct mountpoint *mp;
+static struct hlist_head *list;
+
+static int propagate_one(struct mount *m)
+{
+ struct mount *child;
+ int type;
+ /* skip ones added by this propagate_mnt() */
+ if (IS_MNT_NEW(m))
+ return 0;
+ /* skip if mountpoint isn't covered by it */
+ if (!is_subdir(mp->m_dentry, m->mnt.mnt_root))
+ return 0;
+ if (m->mnt_group_id == last_dest->mnt_group_id) {
+ type = CL_MAKE_SHARED;
+ } else {
+ struct mount *n, *p;
+ for (n = m; ; n = p) {
+ p = n->mnt_master;
+ if (p == dest_master || IS_MNT_MARKED(p)) {
+ while (last_dest->mnt_master != p) {
+ last_source = last_source->mnt_master;
+ last_dest = last_source->mnt_parent;
+ }
+ if (n->mnt_group_id != last_dest->mnt_group_id) {
+ last_source = last_source->mnt_master;
+ last_dest = last_source->mnt_parent;
+ }
+ break;
+ }
}
+ type = CL_SLAVE;
+ /* beginning of peer group among the slaves? */
+ if (IS_MNT_SHARED(m))
+ type |= CL_MAKE_SHARED;
}
- /* slave of the earlier, then */
- *type = CL_SLAVE;
- /* beginning of peer group among the slaves? */
- if (IS_MNT_SHARED(dest))
- *type |= CL_MAKE_SHARED;
- return last_src;
+
+ /* Notice when we are propagating across user namespaces */
+ if (m->mnt_ns->user_ns != user_ns)
+ type |= CL_UNPRIVILEGED;
+ child = copy_tree(last_source, last_source->mnt.mnt_root, type);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+ mnt_set_mountpoint(m, mp, child);
+ last_dest = m;
+ last_source = child;
+ if (m->mnt_master != dest_master) {
+ read_seqlock_excl(&mount_lock);
+ SET_MNT_MARK(m->mnt_master);
+ read_sequnlock_excl(&mount_lock);
+ }
+ hlist_add_head(&child->mnt_hash, list);
+ return 0;
}
/*
int propagate_mnt(struct mount *dest_mnt, struct mountpoint *dest_mp,
struct mount *source_mnt, struct hlist_head *tree_list)
{
- struct user_namespace *user_ns = current->nsproxy->mnt_ns->user_ns;
- struct mount *m, *child;
+ struct mount *m, *n;
int ret = 0;
- struct mount *prev_dest_mnt = dest_mnt;
- struct mount *prev_src_mnt = source_mnt;
- HLIST_HEAD(tmp_list);
-
- for (m = propagation_next(dest_mnt, dest_mnt); m;
- m = propagation_next(m, dest_mnt)) {
- int type;
- struct mount *source;
-
- if (IS_MNT_NEW(m))
- continue;
-
- source = get_source(m, prev_dest_mnt, prev_src_mnt, &type);
-
- /* Notice when we are propagating across user namespaces */
- if (m->mnt_ns->user_ns != user_ns)
- type |= CL_UNPRIVILEGED;
-
- child = copy_tree(source, source->mnt.mnt_root, type);
- if (IS_ERR(child)) {
- ret = PTR_ERR(child);
- tmp_list = *tree_list;
- tmp_list.first->pprev = &tmp_list.first;
- INIT_HLIST_HEAD(tree_list);
+
+ /*
+ * we don't want to bother passing tons of arguments to
+ * propagate_one(); everything is serialized by namespace_sem,
+ * so globals will do just fine.
+ */
+ user_ns = current->nsproxy->mnt_ns->user_ns;
+ last_dest = dest_mnt;
+ last_source = source_mnt;
+ mp = dest_mp;
+ list = tree_list;
+ dest_master = dest_mnt->mnt_master;
+
+ /* all peers of dest_mnt, except dest_mnt itself */
+ for (n = next_peer(dest_mnt); n != dest_mnt; n = next_peer(n)) {
+ ret = propagate_one(n);
+ if (ret)
goto out;
- }
+ }
- if (is_subdir(dest_mp->m_dentry, m->mnt.mnt_root)) {
- mnt_set_mountpoint(m, dest_mp, child);
- hlist_add_head(&child->mnt_hash, tree_list);
- } else {
- /*
- * This can happen if the parent mount was bind mounted
- * on some subdirectory of a shared/slave mount.
- */
- hlist_add_head(&child->mnt_hash, &tmp_list);
- }
- prev_dest_mnt = m;
- prev_src_mnt = child;
+ /* all slave groups */
+ for (m = next_group(dest_mnt, dest_mnt); m;
+ m = next_group(m, dest_mnt)) {
+ /* everything in that slave group */
+ n = m;
+ do {
+ ret = propagate_one(n);
+ if (ret)
+ goto out;
+ n = next_peer(n);
+ } while (n != m);
}
out:
- lock_mount_hash();
- while (!hlist_empty(&tmp_list)) {
- child = hlist_entry(tmp_list.first, struct mount, mnt_hash);
- umount_tree(child, 0);
+ read_seqlock_excl(&mount_lock);
+ hlist_for_each_entry(n, tree_list, mnt_hash) {
+ m = n->mnt_parent;
+ if (m->mnt_master != dest_mnt->mnt_master)
+ CLEAR_MNT_MARK(m->mnt_master);
}
- unlock_mount_hash();
+ read_sequnlock_excl(&mount_lock);
return ret;
}
#define IS_MNT_NEW(m) (!(m)->mnt_ns)
#define CLEAR_MNT_SHARED(m) ((m)->mnt.mnt_flags &= ~MNT_SHARED)
#define IS_MNT_UNBINDABLE(m) ((m)->mnt.mnt_flags & MNT_UNBINDABLE)
+#define IS_MNT_MARKED(m) ((m)->mnt.mnt_flags & MNT_MARKED)
+#define SET_MNT_MARK(m) ((m)->mnt.mnt_flags |= MNT_MARKED)
+#define CLEAR_MNT_MARK(m) ((m)->mnt.mnt_flags &= ~MNT_MARKED)
#define CL_EXPIRE 0x01
#define CL_SLAVE 0x02
return result;
}
-static int proc_pid_cmdline(struct task_struct *task, char * buffer)
+static int proc_pid_cmdline(struct task_struct *task, char *buffer)
{
- int res = 0;
- unsigned int len;
- struct mm_struct *mm = get_task_mm(task);
- if (!mm)
- goto out;
- if (!mm->arg_end)
- goto out_mm; /* Shh! No looking before we're done */
-
- len = mm->arg_end - mm->arg_start;
-
- if (len > PAGE_SIZE)
- len = PAGE_SIZE;
-
- res = access_process_vm(task, mm->arg_start, buffer, len, 0);
-
- // If the nul at the end of args has been overwritten, then
- // assume application is using setproctitle(3).
- if (res > 0 && buffer[res-1] != '\0' && len < PAGE_SIZE) {
- len = strnlen(buffer, res);
- if (len < res) {
- res = len;
- } else {
- len = mm->env_end - mm->env_start;
- if (len > PAGE_SIZE - res)
- len = PAGE_SIZE - res;
- res += access_process_vm(task, mm->env_start, buffer+res, len, 0);
- res = strnlen(buffer, res);
- }
- }
-out_mm:
- mmput(mm);
-out:
- return res;
+ return get_cmdline(task, buffer, PAGE_SIZE);
}
static int proc_pid_auxv(struct task_struct *task, char *buffer)
struct task_struct *task;
void *ns;
char name[50];
- int len = -EACCES;
+ int res = -EACCES;
task = get_proc_task(inode);
if (!task)
if (!ptrace_may_access(task, PTRACE_MODE_READ))
goto out_put_task;
- len = -ENOENT;
+ res = -ENOENT;
ns = ns_ops->get(task);
if (!ns)
goto out_put_task;
snprintf(name, sizeof(name), "%s:[%u]", ns_ops->name, ns_ops->inum(ns));
- len = strlen(name);
-
- if (len > buflen)
- len = buflen;
- if (copy_to_user(buffer, name, len))
- len = -EFAULT;
-
+ res = readlink_copy(buffer, buflen, name);
ns_ops->put(ns);
out_put_task:
put_task_struct(task);
out:
- return len;
+ return res;
}
static const struct inode_operations proc_ns_link_inode_operations = {
if (!tgid)
return -ENOENT;
sprintf(tmp, "%d", tgid);
- return vfs_readlink(dentry,buffer,buflen,tmp);
+ return readlink_copy(buffer, buflen, tmp);
}
static void *proc_self_follow_link(struct dentry *dentry, struct nameidata *nd)
p->root = root;
p->m.poll_event = ns->event;
p->show = show;
+ p->cached_event = ~0ULL;
return 0;
const struct pipe_buf_operations page_cache_pipe_buf_ops = {
.can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = page_cache_pipe_buf_confirm,
.release = page_cache_pipe_buf_release,
.steal = page_cache_pipe_buf_steal,
static const struct pipe_buf_operations user_page_pipe_buf_ops = {
.can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = page_cache_pipe_buf_release,
.steal = user_page_pipe_buf_steal,
static const struct pipe_buf_operations default_pipe_buf_ops = {
.can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = generic_pipe_buf_release,
.steal = generic_pipe_buf_steal,
/* Pipe buffer operations for a socket and similar. */
const struct pipe_buf_operations nosteal_pipe_buf_ops = {
.can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = generic_pipe_buf_release,
.steal = generic_pipe_buf_nosteal,
goto out;
if (buf->page != page) {
- char *src = buf->ops->map(pipe, buf, 1);
+ char *src = kmap_atomic(buf->page);
char *dst = kmap_atomic(page);
memcpy(dst + offset, src + buf->offset, this_len);
flush_dcache_page(page);
kunmap_atomic(dst);
- buf->ops->unmap(pipe, buf, src);
+ kunmap_atomic(src);
}
ret = pagecache_write_end(file, mapping, sd->pos, this_len, this_len,
page, fsdata);
void *data;
loff_t tmp = sd->pos;
- data = buf->ops->map(pipe, buf, 0);
+ data = kmap(buf->page);
ret = __kernel_write(sd->u.file, data + buf->offset, sd->len, &tmp);
- buf->ops->unmap(pipe, buf, data);
+ kunmap(buf->page);
return ret;
}
static int pipe_to_user(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
struct splice_desc *sd)
{
- char *src;
- int ret;
-
- /*
- * See if we can use the atomic maps, by prefaulting in the
- * pages and doing an atomic copy
- */
- if (!fault_in_pages_writeable(sd->u.userptr, sd->len)) {
- src = buf->ops->map(pipe, buf, 1);
- ret = __copy_to_user_inatomic(sd->u.userptr, src + buf->offset,
- sd->len);
- buf->ops->unmap(pipe, buf, src);
- if (!ret) {
- ret = sd->len;
- goto out;
- }
- }
-
- /*
- * No dice, use slow non-atomic map and copy
- */
- src = buf->ops->map(pipe, buf, 0);
-
- ret = sd->len;
- if (copy_to_user(sd->u.userptr, src + buf->offset, sd->len))
- ret = -EFAULT;
-
- buf->ops->unmap(pipe, buf, src);
-out:
- if (ret > 0)
- sd->u.userptr += ret;
- return ret;
+ int n = copy_page_to_iter(buf->page, buf->offset, sd->len, sd->u.data);
+ return n == sd->len ? n : -EFAULT;
}
/*
* For lack of a better implementation, implement vmsplice() to userspace
* as a simple copy of the pipes pages to the user iov.
*/
-static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
+static long vmsplice_to_user(struct file *file, const struct iovec __user *uiov,
unsigned long nr_segs, unsigned int flags)
{
struct pipe_inode_info *pipe;
struct splice_desc sd;
- ssize_t size;
- int error;
long ret;
+ struct iovec iovstack[UIO_FASTIOV];
+ struct iovec *iov = iovstack;
+ struct iov_iter iter;
+ ssize_t count = 0;
pipe = get_pipe_info(file);
if (!pipe)
return -EBADF;
- pipe_lock(pipe);
-
- error = ret = 0;
- while (nr_segs) {
- void __user *base;
- size_t len;
-
- /*
- * Get user address base and length for this iovec.
- */
- error = get_user(base, &iov->iov_base);
- if (unlikely(error))
- break;
- error = get_user(len, &iov->iov_len);
- if (unlikely(error))
- break;
-
- /*
- * Sanity check this iovec. 0 read succeeds.
- */
- if (unlikely(!len))
- break;
- if (unlikely(!base)) {
- error = -EFAULT;
- break;
- }
-
- if (unlikely(!access_ok(VERIFY_WRITE, base, len))) {
- error = -EFAULT;
- break;
- }
-
- sd.len = 0;
- sd.total_len = len;
- sd.flags = flags;
- sd.u.userptr = base;
- sd.pos = 0;
-
- size = __splice_from_pipe(pipe, &sd, pipe_to_user);
- if (size < 0) {
- if (!ret)
- ret = size;
-
- break;
- }
-
- ret += size;
+ ret = rw_copy_check_uvector(READ, uiov, nr_segs,
+ ARRAY_SIZE(iovstack), iovstack, &iov);
+ if (ret <= 0)
+ return ret;
- if (size < len)
- break;
+ iov_iter_init(&iter, iov, nr_segs, count, 0);
- nr_segs--;
- iov++;
- }
+ sd.len = 0;
+ sd.total_len = count;
+ sd.flags = flags;
+ sd.u.data = &iter;
+ sd.pos = 0;
+ pipe_lock(pipe);
+ ret = __splice_from_pipe(pipe, &sd, pipe_to_user);
pipe_unlock(pipe);
- if (!ret)
- ret = error;
+ if (iov != iovstack)
+ kfree(iov);
return ret;
}
} else
up_write(&iinfo->i_data_sem);
- retval = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
+ retval = __generic_file_aio_write(iocb, iov, nr_segs);
mutex_unlock(&inode->i_mutex);
if (retval > 0) {
trace_xfs_file_direct_write(ip, count, iocb->ki_pos, 0);
ret = generic_file_direct_write(iocb, iovp,
- &nr_segs, pos, &iocb->ki_pos, count, ocount);
+ &nr_segs, pos, count, ocount);
out:
xfs_rw_iunlock(ip, iolock);
const struct iovec *iovp,
unsigned long nr_segs,
loff_t pos,
- size_t ocount)
+ size_t count)
{
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
ssize_t ret;
int enospc = 0;
int iolock = XFS_IOLOCK_EXCL;
- size_t count = ocount;
+ struct iov_iter from;
xfs_rw_ilock(ip, iolock);
if (ret)
goto out;
+ iov_iter_init(&from, iovp, nr_segs, count, 0);
/* We can write back this queue in page reclaim */
current->backing_dev_info = mapping->backing_dev_info;
write_retry:
trace_xfs_file_buffered_write(ip, count, iocb->ki_pos, 0);
- ret = generic_file_buffered_write(iocb, iovp, nr_segs,
- pos, &iocb->ki_pos, count, 0);
-
+ ret = generic_perform_write(file, &from, pos);
+ if (likely(ret >= 0))
+ iocb->ki_pos = pos + ret;
/*
* If we just got an ENOSPC, try to write back all dirty inodes to
* convert delalloc space to free up some of the excess reserved
return error;
}
-/*
- * This is a copy from fs/namei.c:vfs_readlink(), except for removing it's
- * unused first argument.
- */
-STATIC int
-do_readlink(
- char __user *buffer,
- int buflen,
- const char *link)
-{
- int len;
-
- len = PTR_ERR(link);
- if (IS_ERR(link))
- goto out;
-
- len = strlen(link);
- if (len > (unsigned) buflen)
- len = buflen;
- if (copy_to_user(buffer, link, len))
- len = -EFAULT;
- out:
- return len;
-}
-
-
int
xfs_readlink_by_handle(
struct file *parfilp,
error = -xfs_readlink(XFS_I(dentry->d_inode), link);
if (error)
goto out_kfree;
- error = do_readlink(hreq->ohandle, olen, link);
+ error = readlink_copy(hreq->ohandle, olen, link);
if (error)
goto out_kfree;
#include <linux/types.h>
#include <linux/irqflags.h>
-extern unsigned long wrong_size_cmpxchg(volatile void *ptr);
+extern unsigned long wrong_size_cmpxchg(volatile void *ptr)
+ __noreturn;
/*
* Generic version of __cmpxchg_local (disables interrupts). Takes an unsigned
/**
* syscall_get_arch - return the AUDIT_ARCH for the current system call
- * @task: task of interest, must be in system call entry tracing
- * @regs: task_pt_regs() of @task
*
* Returns the AUDIT_ARCH_* based on the system call convention in use.
*
* Architectures which permit CONFIG_HAVE_ARCH_SECCOMP_FILTER must
* provide an implementation of this.
*/
-int syscall_get_arch(struct task_struct *task, struct pt_regs *regs);
+int syscall_get_arch(void);
#endif /* _ASM_SYSCALL_H */
#define I830_GMCH_CTRL 0x52
+#define I830_GMCH_GMS_MASK 0x70
+#define I830_GMCH_GMS_LOCAL 0x10
+#define I830_GMCH_GMS_STOLEN_512 0x20
+#define I830_GMCH_GMS_STOLEN_1024 0x30
+#define I830_GMCH_GMS_STOLEN_8192 0x40
+
#define I855_GMCH_GMS_MASK 0xF0
#define I855_GMCH_GMS_STOLEN_0M 0x0
#define I855_GMCH_GMS_STOLEN_1M (0x1 << 4)
#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4)
#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4)
+#define I830_DRB3 0x63
+#define I85X_DRB3 0x43
+#define I865_TOUD 0xc4
+
+#define I830_ESMRAMC 0x91
+#define I845_ESMRAMC 0x9e
+#define I85X_ESMRAMC 0x61
+#define TSEG_ENABLE (1 << 0)
+#define I830_TSEG_SIZE_512K (0 << 1)
+#define I830_TSEG_SIZE_1M (1 << 1)
+#define I845_TSEG_SIZE_MASK (3 << 1)
+#define I845_TSEG_SIZE_512K (2 << 1)
+#define I845_TSEG_SIZE_1M (3 << 1)
+
#endif /* _I915_DRM_H_ */
#include <linux/list.h>
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/dmaengine.h>
/**
static inline struct dma_chan *acpi_dma_request_slave_chan_by_index(
struct device *dev, size_t index)
{
- return NULL;
+ return ERR_PTR(-ENODEV);
}
static inline struct dma_chan *acpi_dma_request_slave_chan_by_name(
struct device *dev, const char *name)
{
- return NULL;
+ return ERR_PTR(-ENODEV);
}
#define acpi_dma_simple_xlate NULL
extern int __init audit_register_class(int class, unsigned *list);
extern int audit_classify_syscall(int abi, unsigned syscall);
extern int audit_classify_arch(int arch);
+/* only for compat system calls */
+extern unsigned compat_write_class[];
+extern unsigned compat_read_class[];
+extern unsigned compat_dir_class[];
+extern unsigned compat_chattr_class[];
+extern unsigned compat_signal_class[];
+
+extern int __weak audit_classify_compat_syscall(int abi, unsigned syscall);
/* audit_names->type values */
#define AUDIT_TYPE_UNKNOWN 0 /* we don't know yet */
extern void audit_log_session_info(struct audit_buffer *ab);
+#ifdef CONFIG_AUDIT_COMPAT_GENERIC
+#define audit_is_compat(arch) (!((arch) & __AUDIT_ARCH_64BIT))
+#else
+#define audit_is_compat(arch) false
+#endif
+
#ifdef CONFIG_AUDITSYSCALL
/* These are defined in auditsc.c */
/* Public API */
}
#define for_each_bvec(bvl, bio_vec, iter, start) \
- for ((iter) = start; \
- (bvl) = bvec_iter_bvec((bio_vec), (iter)), \
- (iter).bi_size; \
+ for (iter = (start); \
+ (iter).bi_size && \
+ ((bvl = bvec_iter_bvec((bio_vec), (iter))), 1); \
bvec_iter_advance((bio_vec), &(iter), (bvl).bv_len))
struct rq_map_data;
extern struct bio *bio_map_user_iov(struct request_queue *,
struct block_device *,
- struct sg_iovec *, int, int, gfp_t);
+ const struct sg_iovec *, int, int, gfp_t);
extern void bio_unmap_user(struct bio *);
extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int,
gfp_t);
extern struct bio *bio_copy_user(struct request_queue *, struct rq_map_data *,
unsigned long, unsigned int, int, gfp_t);
extern struct bio *bio_copy_user_iov(struct request_queue *,
- struct rq_map_data *, struct sg_iovec *,
+ struct rq_map_data *,
+ const struct sg_iovec *,
int, int, gfp_t);
extern int bio_uncopy_user(struct bio *);
void zero_fill_bio(struct bio *bio);
__REQ_KERNEL, /* direct IO to kernel pages */
__REQ_PM, /* runtime pm request */
__REQ_END, /* last of chain of requests */
+ __REQ_HASHED, /* on IO scheduler merge hash */
__REQ_NR_BITS, /* stops here */
};
#define REQ_KERNEL (1ULL << __REQ_KERNEL)
#define REQ_PM (1ULL << __REQ_PM)
#define REQ_END (1ULL << __REQ_END)
+#define REQ_HASHED (1ULL << __REQ_HASHED)
#endif /* __LINUX_BLK_TYPES_H */
struct bio *bio;
struct bio *biotail;
- struct hlist_node hash; /* merge hash */
+ /*
+ * The hash is used inside the scheduler, and killed once the
+ * request reaches the dispatch list. The ipi_list is only used
+ * to queue the request for softirq completion, which is long
+ * after the request has been unhashed (and even removed from
+ * the dispatch list).
+ */
+ union {
+ struct hlist_node hash; /* merge hash */
+ struct list_head ipi_list;
+ };
+
/*
* The rb_node is only used inside the io scheduler, requests
* are pruned when moved to the dispatch queue. So let the
extern int blk_rq_unmap_user(struct bio *);
extern int blk_rq_map_kern(struct request_queue *, struct request *, void *, unsigned int, gfp_t);
extern int blk_rq_map_user_iov(struct request_queue *, struct request *,
- struct rq_map_data *, struct sg_iovec *, int,
- unsigned int, gfp_t);
+ struct rq_map_data *, const struct sg_iovec *,
+ int, unsigned int, gfp_t);
extern int blk_execute_rq(struct request_queue *, struct gendisk *,
struct request *, int);
extern void blk_execute_rq_nowait(struct request_queue *, struct gendisk *,
int block_write_full_page_endio(struct page *page, get_block_t *get_block,
struct writeback_control *wbc, bh_end_io_t *handler);
int block_read_full_page(struct page*, get_block_t*);
-int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
- unsigned long from);
+int block_is_partially_uptodate(struct page *page, unsigned long from,
+ unsigned long count);
int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
unsigned flags, struct page **pagep, get_block_t *get_block);
int __block_write_begin(struct page *page, loff_t pos, unsigned len,
--- /dev/null
+#ifndef __LINUX_COMPILER_H
+#error "Please don't include <linux/compiler-clang.h> directly, include <linux/compiler.h> instead."
+#endif
+
+/* Some compiler specific definitions are overwritten here
+ * for Clang compiler
+ */
+
+#ifdef uninitialized_var
+#undef uninitialized_var
+#define uninitialized_var(x) x = *(&(x))
+#endif
# include <linux/compiler-intel.h>
#endif
+/* Clang compiler defines __GNUC__. So we will overwrite implementations
+ * coming from above header files here
+ */
+#ifdef __clang__
+#include <linux/compiler-clang.h>
+#endif
+
/*
* Generic compiler-dependent macros required for kernel
* build go below this comment. Actual compiler/compiler version
* FREQUENCY TABLE HELPERS *
*********************************************************************/
-#define CPUFREQ_ENTRY_INVALID ~0
-#define CPUFREQ_TABLE_END ~1
-#define CPUFREQ_BOOST_FREQ ~2
+/* Special Values of .frequency field */
+#define CPUFREQ_ENTRY_INVALID ~0
+#define CPUFREQ_TABLE_END ~1
+/* Special Values of .flags field */
+#define CPUFREQ_BOOST_FREQ (1 << 0)
struct cpufreq_frequency_table {
+ unsigned int flags;
unsigned int driver_data; /* driver specific data, not used by core */
unsigned int frequency; /* kHz - doesn't need to be in ascending
* order */
* and this struct will then be passed in as an argument to the
* DMA engine device_control() function.
*
- * The rationale for adding configuration information to this struct
- * is as follows: if it is likely that most DMA slave controllers in
- * the world will support the configuration option, then make it
- * generic. If not: if it is fixed so that it be sent in static from
- * the platform data, then prefer to do that. Else, if it is neither
- * fixed at runtime, nor generic enough (such as bus mastership on
- * some CPU family and whatnot) then create a custom slave config
- * struct and pass that, then make this config a member of that
- * struct, if applicable.
+ * The rationale for adding configuration information to this struct is as
+ * follows: if it is likely that more than one DMA slave controllers in
+ * the world will support the configuration option, then make it generic.
+ * If not: if it is fixed so that it be sent in static from the platform
+ * data, then prefer to do that.
*/
struct dma_slave_config {
enum dma_transfer_direction direction;
/*
- * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on
- * AVR32 systems.)
+ * Driver for the Synopsys DesignWare DMA Controller
*
* Copyright (C) 2007 Atmel Corporation
* Copyright (C) 2010-2011 ST Microelectronics
* @nr_masters: Number of AHB masters supported by the controller
* @data_width: Maximum data width supported by hardware per AHB master
* (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
- * @sd: slave specific data. Used for configuring channels
- * @sd_count: count of slave data structures passed.
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
struct vfsmount;
struct dentry;
-extern void __init files_defer_init(void);
-
#define rcu_dereference_check_fdtable(files, fdtfd) \
rcu_dereference_check((fdtfd), lockdep_is_held(&(files)->file_lock))
struct swap_info_struct;
struct seq_file;
struct workqueue_struct;
+struct iov_iter;
extern void __init inode_init(void);
extern void __init inode_init_early(void);
/* File needs atomic accesses to f_pos */
#define FMODE_ATOMIC_POS ((__force fmode_t)0x8000)
+/* Write access to underlying fs */
+#define FMODE_WRITER ((__force fmode_t)0x10000)
/* File was opened by fanotify and shouldn't generate fanotify events */
#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
struct address_space;
struct writeback_control;
-struct iov_iter {
- const struct iovec *iov;
- unsigned long nr_segs;
- size_t iov_offset;
- size_t count;
-};
-
-size_t iov_iter_copy_from_user_atomic(struct page *page,
- struct iov_iter *i, unsigned long offset, size_t bytes);
-size_t iov_iter_copy_from_user(struct page *page,
- struct iov_iter *i, unsigned long offset, size_t bytes);
-void iov_iter_advance(struct iov_iter *i, size_t bytes);
-int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes);
-size_t iov_iter_single_seg_count(const struct iov_iter *i);
-
-static inline void iov_iter_init(struct iov_iter *i,
- const struct iovec *iov, unsigned long nr_segs,
- size_t count, size_t written)
-{
- i->iov = iov;
- i->nr_segs = nr_segs;
- i->iov_offset = 0;
- i->count = count + written;
-
- iov_iter_advance(i, written);
-}
-
-static inline size_t iov_iter_count(struct iov_iter *i)
-{
- return i->count;
-}
-
/*
* "descriptor" for what we're up to with a read.
* This allows us to use the same read code yet
int (*migratepage) (struct address_space *,
struct page *, struct page *, enum migrate_mode);
int (*launder_page) (struct page *);
- int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
+ int (*is_partially_uptodate) (struct page *, unsigned long,
unsigned long);
void (*is_dirty_writeback) (struct page *, bool *, bool *);
int (*error_remove_page)(struct address_space *, struct page *);
index < ra->start + ra->size);
}
-#define FILE_MNT_WRITE_TAKEN 1
-#define FILE_MNT_WRITE_RELEASED 2
-
struct file {
union {
struct llist_node fu_llist;
struct list_head f_tfile_llink;
#endif /* #ifdef CONFIG_EPOLL */
struct address_space *f_mapping;
-#ifdef CONFIG_DEBUG_WRITECOUNT
- unsigned long f_mnt_write_state;
-#endif
} __attribute__((aligned(4))); /* lest something weird decides that 2 is OK */
struct file_handle {
#define fput_atomic(x) atomic_long_add_unless(&(x)->f_count, -1, 1)
#define file_count(x) atomic_long_read(&(x)->f_count)
-#ifdef CONFIG_DEBUG_WRITECOUNT
-static inline void file_take_write(struct file *f)
-{
- WARN_ON(f->f_mnt_write_state != 0);
- f->f_mnt_write_state = FILE_MNT_WRITE_TAKEN;
-}
-static inline void file_release_write(struct file *f)
-{
- f->f_mnt_write_state |= FILE_MNT_WRITE_RELEASED;
-}
-static inline void file_reset_write(struct file *f)
-{
- f->f_mnt_write_state = 0;
-}
-static inline void file_check_state(struct file *f)
-{
- /*
- * At this point, either both or neither of these bits
- * should be set.
- */
- WARN_ON(f->f_mnt_write_state == FILE_MNT_WRITE_TAKEN);
- WARN_ON(f->f_mnt_write_state == FILE_MNT_WRITE_RELEASED);
-}
-static inline int file_check_writeable(struct file *f)
-{
- if (f->f_mnt_write_state == FILE_MNT_WRITE_TAKEN)
- return 0;
- printk(KERN_WARNING "writeable file with no "
- "mnt_want_write()\n");
- WARN_ON(1);
- return -EINVAL;
-}
-#else /* !CONFIG_DEBUG_WRITECOUNT */
-static inline void file_take_write(struct file *filp) {}
-static inline void file_release_write(struct file *filp) {}
-static inline void file_reset_write(struct file *filp) {}
-static inline void file_check_state(struct file *filp) {}
-static inline int file_check_writeable(struct file *filp)
-{
- return 0;
-}
-#endif /* CONFIG_DEBUG_WRITECOUNT */
-
#define MAX_NON_LFS ((1UL<<31) - 1)
/* Page cache limit. The filesystems should put that into their s_maxbytes
extern int generic_file_readonly_mmap(struct file *, struct vm_area_struct *);
extern int generic_file_remap_pages(struct vm_area_struct *, unsigned long addr,
unsigned long size, pgoff_t pgoff);
-extern int file_read_actor(read_descriptor_t * desc, struct page *page, unsigned long offset, unsigned long size);
int generic_write_checks(struct file *file, loff_t *pos, size_t *count, int isblk);
extern ssize_t generic_file_aio_read(struct kiocb *, const struct iovec *, unsigned long, loff_t);
-extern ssize_t __generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long,
- loff_t *);
+extern ssize_t __generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long);
extern ssize_t generic_file_aio_write(struct kiocb *, const struct iovec *, unsigned long, loff_t);
extern ssize_t generic_file_direct_write(struct kiocb *, const struct iovec *,
- unsigned long *, loff_t, loff_t *, size_t, size_t);
-extern ssize_t generic_file_buffered_write(struct kiocb *, const struct iovec *,
- unsigned long, loff_t, loff_t *, size_t, ssize_t);
+ unsigned long *, loff_t, size_t, size_t);
+extern ssize_t generic_perform_write(struct file *, struct iov_iter *, loff_t);
extern ssize_t do_sync_read(struct file *filp, char __user *buf, size_t len, loff_t *ppos);
extern ssize_t do_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos);
extern int generic_segment_checks(const struct iovec *iov,
#define special_file(m) (S_ISCHR(m)||S_ISBLK(m)||S_ISFIFO(m)||S_ISSOCK(m))
-extern int vfs_readlink(struct dentry *, char __user *, int, const char *);
+extern int readlink_copy(char __user *, int, const char *);
extern int page_readlink(struct dentry *, char __user *, int);
extern void *page_follow_link_light(struct dentry *, struct nameidata *);
extern void page_put_link(struct dentry *, struct nameidata *, void *);
#include <linux/percpu.h>
#include <linux/hardirq.h>
#include <linux/perf_event.h>
+#include <linux/tracepoint.h>
struct trace_array;
struct trace_buffer;
TRACE_EVENT_FL_IGNORE_ENABLE_BIT,
TRACE_EVENT_FL_WAS_ENABLED_BIT,
TRACE_EVENT_FL_USE_CALL_FILTER_BIT,
+ TRACE_EVENT_FL_TRACEPOINT_BIT,
};
/*
* (used for module unloading, if a module event is enabled,
* it is best to clear the buffers that used it).
* USE_CALL_FILTER - For ftrace internal events, don't use file filter
+ * TRACEPOINT - Event is a tracepoint
*/
enum {
TRACE_EVENT_FL_FILTERED = (1 << TRACE_EVENT_FL_FILTERED_BIT),
TRACE_EVENT_FL_IGNORE_ENABLE = (1 << TRACE_EVENT_FL_IGNORE_ENABLE_BIT),
TRACE_EVENT_FL_WAS_ENABLED = (1 << TRACE_EVENT_FL_WAS_ENABLED_BIT),
TRACE_EVENT_FL_USE_CALL_FILTER = (1 << TRACE_EVENT_FL_USE_CALL_FILTER_BIT),
+ TRACE_EVENT_FL_TRACEPOINT = (1 << TRACE_EVENT_FL_TRACEPOINT_BIT),
};
struct ftrace_event_call {
struct list_head list;
struct ftrace_event_class *class;
- char *name;
+ union {
+ char *name;
+ /* Set TRACE_EVENT_FL_TRACEPOINT flag when using "tp" */
+ struct tracepoint *tp;
+ };
struct trace_event event;
const char *print_fmt;
struct event_filter *filter;
* bit 3: ftrace internal event (do not enable)
* bit 4: Event was enabled by module
* bit 5: use call filter rather than file filter
+ * bit 6: Event is a tracepoint
*/
int flags; /* static flags of different events */
#endif
};
+static inline const char *
+ftrace_event_name(struct ftrace_event_call *call)
+{
+ if (call->flags & TRACE_EVENT_FL_TRACEPOINT)
+ return call->tp ? call->tp->name : NULL;
+ else
+ return call->name;
+}
+
struct trace_array;
struct ftrace_subsystem_dir;
#define __TRACE_EVENT_FLAGS(name, value) \
static int __init trace_init_flags_##name(void) \
{ \
- event_##name.flags = value; \
+ event_##name.flags |= value; \
return 0; \
} \
early_initcall(trace_init_flags_##name);
#define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */
#define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */
#define I2C_CLASS_SPD (1<<7) /* Memory modules */
+#define I2C_CLASS_DEPRECATED (1<<8) /* Warn users that adapter will stop using classes */
/* Internal numbers to terminate lists */
#define I2C_CLIENT_END 0xfffeU
--- /dev/null
+/*
+ * i2c-bfin-twi.h - interface to ADI TWI controller
+ *
+ * Copyright 2005-2014 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __I2C_BFIN_TWI_H__
+#define __I2C_BFIN_TWI_H__
+
+#include <linux/types.h>
+#include <linux/i2c.h>
+
+/*
+ * ADI twi registers layout
+ */
+struct bfin_twi_regs {
+ u16 clkdiv;
+ u16 dummy1;
+ u16 control;
+ u16 dummy2;
+ u16 slave_ctl;
+ u16 dummy3;
+ u16 slave_stat;
+ u16 dummy4;
+ u16 slave_addr;
+ u16 dummy5;
+ u16 master_ctl;
+ u16 dummy6;
+ u16 master_stat;
+ u16 dummy7;
+ u16 master_addr;
+ u16 dummy8;
+ u16 int_stat;
+ u16 dummy9;
+ u16 int_mask;
+ u16 dummy10;
+ u16 fifo_ctl;
+ u16 dummy11;
+ u16 fifo_stat;
+ u16 dummy12;
+ u32 __pad[20];
+ u16 xmt_data8;
+ u16 dummy13;
+ u16 xmt_data16;
+ u16 dummy14;
+ u16 rcv_data8;
+ u16 dummy15;
+ u16 rcv_data16;
+ u16 dummy16;
+};
+
+struct bfin_twi_iface {
+ int irq;
+ spinlock_t lock;
+ char read_write;
+ u8 command;
+ u8 *transPtr;
+ int readNum;
+ int writeNum;
+ int cur_mode;
+ int manual_stop;
+ int result;
+ struct i2c_adapter adap;
+ struct completion complete;
+ struct i2c_msg *pmsg;
+ int msg_num;
+ int cur_msg;
+ u16 saved_clkdiv;
+ u16 saved_control;
+ struct bfin_twi_regs __iomem *regs_base;
+};
+
+/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
+#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
+#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
+
+/* TWI_PRESCALE Masks */
+#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
+#define TWI_ENA 0x0080 /* TWI Enable */
+#define SCCB 0x0200 /* SCCB Compatibility Enable */
+
+/* TWI_SLAVE_CTL Masks */
+#define SEN 0x0001 /* Slave Enable */
+#define SADD_LEN 0x0002 /* Slave Address Length */
+#define STDVAL 0x0004 /* Slave Transmit Data Valid */
+#define NAK 0x0008 /* NAK Generated At Conclusion Of Transfer */
+#define GEN 0x0010 /* General Call Address Matching Enabled */
+
+/* TWI_SLAVE_STAT Masks */
+#define SDIR 0x0001 /* Slave Transfer Direction (RX/TX*) */
+#define GCALL 0x0002 /* General Call Indicator */
+
+/* TWI_MASTER_CTL Masks */
+#define MEN 0x0001 /* Master Mode Enable */
+#define MADD_LEN 0x0002 /* Master Address Length */
+#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
+#define FAST 0x0008 /* Use Fast Mode Timing Specs */
+#define STOP 0x0010 /* Issue Stop Condition */
+#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
+#define DCNT 0x3FC0 /* Data Bytes To Transfer */
+#define SDAOVR 0x4000 /* Serial Data Override */
+#define SCLOVR 0x8000 /* Serial Clock Override */
+
+/* TWI_MASTER_STAT Masks */
+#define MPROG 0x0001 /* Master Transfer In Progress */
+#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
+#define ANAK 0x0004 /* Address Not Acknowledged */
+#define DNAK 0x0008 /* Data Not Acknowledged */
+#define BUFRDERR 0x0010 /* Buffer Read Error */
+#define BUFWRERR 0x0020 /* Buffer Write Error */
+#define SDASEN 0x0040 /* Serial Data Sense */
+#define SCLSEN 0x0080 /* Serial Clock Sense */
+#define BUSBUSY 0x0100 /* Bus Busy Indicator */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
+#define SINIT 0x0001 /* Slave Transfer Initiated */
+#define SCOMP 0x0002 /* Slave Transfer Complete */
+#define SERR 0x0004 /* Slave Transfer Error */
+#define SOVF 0x0008 /* Slave Overflow */
+#define MCOMP 0x0010 /* Master Transfer Complete */
+#define MERR 0x0020 /* Master Transfer Error */
+#define XMTSERV 0x0040 /* Transmit FIFO Service */
+#define RCVSERV 0x0080 /* Receive FIFO Service */
+
+/* TWI_FIFO_CTRL Masks */
+#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
+#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
+#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
+#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
+
+/* TWI_FIFO_STAT Masks */
+#define XMTSTAT 0x0003 /* Transmit FIFO Status */
+#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
+#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
+#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
+
+#define RCVSTAT 0x000C /* Receive FIFO Status */
+#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
+#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
+#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
+
+#endif
MC13892_LED_R,
MC13892_LED_G,
MC13892_LED_B,
+ /* MC34708 LED IDs */
+ MC34708_LED_R,
+ MC34708_LED_G,
};
struct mc13xxx_led_platform_data {
#define MC13892_LED_C2_CURRENT_G(x) (((x) & 0x7) << 21)
/* MC13892 LED Control 3 */
#define MC13892_LED_C3_CURRENT_B(x) (((x) & 0x7) << 9)
+/* MC34708 LED Control 0 */
+#define MC34708_LED_C0_CURRENT_R(x) (((x) & 0x3) << 9)
+#define MC34708_LED_C0_CURRENT_G(x) (((x) & 0x3) << 21)
u32 led_control[MAX_LED_CONTROL_REGS];
};
struct rtsx_slot {
struct platform_device *p_dev;
void (*card_event)(struct platform_device *p_dev);
+ void (*done_transfer)(struct platform_device *p_dev);
};
#endif
#define HOST_TO_DEVICE 0
#define DEVICE_TO_HOST 1
-#define MAX_PHASE 31
+#define RTSX_PHASE_MAX 32
#define RX_TUNING_CNT 3
/* SG descriptor */
int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout);
int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
int num_sg, bool read, int timeout);
+int rtsx_pci_dma_map_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+ int num_sg, bool read);
+int rtsx_pci_dma_unmap_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+ int num_sg, bool read);
+int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+ int sg_count, bool read);
int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card);
int set_page_dirty(struct page *page);
int set_page_dirty_lock(struct page *page);
int clear_page_dirty_for_io(struct page *page);
+int get_cmdline(struct task_struct *task, char *buffer, int buflen);
/* Is the vma a continuation of the stack vma above it? */
static inline int vma_growsdown(struct vm_area_struct *vma, unsigned long addr)
* actively failing requests
*/
- unsigned int cmd_timeout_ms; /* in milliseconds */
+ unsigned int busy_timeout; /* busy detect timeout in ms */
/* Set this flag only for blocking sanitize request */
bool sanitize_busy;
struct mmc_command *, int);
extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
- bool);
+ bool, bool);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
u32 caps2; /* More host capabilities */
#define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */
-#define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */
#define MMC_CAP2_FULL_PWR_CYCLE (1 << 2) /* Can do full power cycle */
#define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */
-#define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */
#define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */
#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */
#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
MMC_CAP2_HS200_1_2V_SDR)
-#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */
#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */
#define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */
#define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */
#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \
MMC_CAP2_PACKED_WR)
#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */
-#define MMC_CAP2_SANITIZE (1 << 15) /* Support Sanitize */
mmc_pm_flag_t pm_caps; /* supported pm features */
unsigned int max_req_size; /* maximum number of bytes in one req */
unsigned int max_blk_size; /* maximum size of one mmc block */
unsigned int max_blk_count; /* maximum number of blocks in one req */
- unsigned int max_discard_to; /* max. discard timeout in ms */
+ unsigned int max_busy_timeout; /* max busy timeout in ms */
/* private data */
spinlock_t lock; /* lock for claim and bus ops */
void mmc_detect_change(struct mmc_host *, unsigned long delay);
void mmc_request_done(struct mmc_host *, struct mmc_request *);
-int mmc_cache_ctrl(struct mmc_host *, u8);
-
static inline void mmc_signal_sdio_irq(struct mmc_host *host)
{
host->ops->enable_sdio_irq(host, 0);
int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
-/* Module parameter */
-extern bool mmc_assume_removable;
-
static inline int mmc_card_is_removable(struct mmc_host *host)
{
- return !(host->caps & MMC_CAP_NONREMOVABLE) && mmc_assume_removable;
+ return !(host->caps & MMC_CAP_NONREMOVABLE);
}
static inline int mmc_card_keep_power(struct mmc_host *host)
/*
* struct sdhci_plat_data: spear sdhci platform data structure
*
- * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket
- * @power_active_high: if set, enable power to sdhci socket by setting
- * card_power_gpio
- * @power_always_enb: If set, then enable power on probe, otherwise enable only
- * on card insertion and disable on card removal.
* card_int_gpio: gpio pin used for card detection
*/
struct sdhci_plat_data {
- int card_power_gpio;
- int power_active_high;
- int power_always_enb;
int card_int_gpio;
};
#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5)
/* Controller does not support HS200 */
#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
+/* Controller does not support DDR50 */
+#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
unsigned int debounce);
void mmc_gpio_free_cd(struct mmc_host *host);
+int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
+ unsigned int idx, bool override_active_level,
+ unsigned int debounce);
+void mmc_gpiod_free_cd(struct mmc_host *host);
+void mmc_gpiod_request_cd_irq(struct mmc_host *host);
+
#endif
* See documentation of "x86_match_cpu" for details.
*/
+/*
+ * MODULE_DEVICE_TABLE expects this struct to be called x86cpu_device_id.
+ * Although gcc seems to ignore this error, clang fails without this define.
+ */
+#define x86cpu_device_id x86_cpu_id
struct x86_cpu_id {
__u16 vendor;
__u16 family;
#define MNT_SHARED_MASK (MNT_UNBINDABLE)
#define MNT_PROPAGATION_MASK (MNT_SHARED | MNT_UNBINDABLE)
+#define MNT_INTERNAL_FLAGS (MNT_SHARED | MNT_WRITE_HOLD | MNT_INTERNAL | \
+ MNT_DOOMED | MNT_SYNC_UMOUNT | MNT_MARKED)
#define MNT_INTERNAL 0x4000
#define MNT_LOCKED 0x800000
#define MNT_DOOMED 0x1000000
#define MNT_SYNC_UMOUNT 0x2000000
+#define MNT_MARKED 0x4000000
struct vfsmount {
struct dentry *mnt_root; /* root of the mounted tree */
struct nbd_device {
int flags;
int harderror; /* Code of hard error */
- struct socket * sock;
- struct file * file; /* If == NULL, device is not ready, yet */
+ struct socket * sock; /* If == NULL, device is not ready, yet */
int magic;
spinlock_t queue_lock;
struct ntb_client {
struct device_driver driver;
- int (*probe) (struct pci_dev *pdev);
- void (*remove) (struct pci_dev *pdev);
+ int (*probe)(struct pci_dev *pdev);
+ void (*remove)(struct pci_dev *pdev);
+};
+
+enum {
+ NTB_LINK_DOWN = 0,
+ NTB_LINK_UP,
};
int ntb_register_client(struct ntb_client *drvr);
void ntb_unregister_client_dev(char *device_name);
struct ntb_queue_handlers {
- void (*rx_handler) (struct ntb_transport_qp *qp, void *qp_data,
- void *data, int len);
- void (*tx_handler) (struct ntb_transport_qp *qp, void *qp_data,
- void *data, int len);
- void (*event_handler) (void *data, int status);
+ void (*rx_handler)(struct ntb_transport_qp *qp, void *qp_data,
+ void *data, int len);
+ void (*tx_handler)(struct ntb_transport_qp *qp, void *qp_data,
+ void *data, int len);
+ void (*event_handler)(void *data, int status);
};
unsigned char ntb_transport_qp_num(struct ntb_transport_qp *qp);
#define NVME_VS(major, minor) (major << 16 | minor)
-#define NVME_IO_TIMEOUT (5 * HZ)
+extern unsigned char io_timeout;
+#define NVME_IO_TIMEOUT (io_timeout * HZ)
/*
* Represents an NVM Express device. Each nvme_dev is a PCI function.
*/
struct nvme_dev {
struct list_head node;
- struct nvme_queue **queues;
+ struct nvme_queue __rcu **queues;
+ unsigned short __percpu *io_queue;
u32 __iomem *dbs;
struct pci_dev *pci_dev;
struct dma_pool *prp_page_pool;
struct dma_pool *prp_small_pool;
int instance;
- int queue_count;
+ unsigned queue_count;
+ unsigned online_queues;
+ unsigned max_qid;
+ int q_depth;
u32 db_stride;
u32 ctrl_config;
struct msix_entry *entry;
struct miscdevice miscdev;
work_func_t reset_workfn;
struct work_struct reset_work;
+ struct notifier_block nb;
char name[12];
char serial[20];
char model[40];
int length; /* Of data, in bytes */
unsigned long start_time;
dma_addr_t first_dma;
+ struct list_head node;
struct scatterlist sg[0];
};
*/
void nvme_free_iod(struct nvme_dev *dev, struct nvme_iod *iod);
-int nvme_setup_prps(struct nvme_dev *dev, struct nvme_common_command *cmd,
- struct nvme_iod *iod, int total_len, gfp_t gfp);
+int nvme_setup_prps(struct nvme_dev *, struct nvme_iod *, int , gfp_t);
struct nvme_iod *nvme_map_user_pages(struct nvme_dev *dev, int write,
unsigned long addr, unsigned length);
void nvme_unmap_user_pages(struct nvme_dev *dev, int write,
struct nvme_iod *iod);
-struct nvme_queue *get_nvmeq(struct nvme_dev *dev);
-void put_nvmeq(struct nvme_queue *nvmeq);
-int nvme_submit_sync_cmd(struct nvme_queue *nvmeq, struct nvme_command *cmd,
- u32 *result, unsigned timeout);
+int nvme_submit_io_cmd(struct nvme_dev *, struct nvme_command *, u32 *);
int nvme_submit_flush_data(struct nvme_queue *nvmeq, struct nvme_ns *ns);
int nvme_submit_admin_cmd(struct nvme_dev *, struct nvme_command *,
u32 *result);
*/
int can_merge;
- /*
- * ->map() returns a virtual address mapping of the pipe buffer.
- * The last integer flag reflects whether this should be an atomic
- * mapping or not. The atomic map is faster, however you can't take
- * page faults before calling ->unmap() again. So if you need to eg
- * access user data through copy_to/from_user(), then you must get
- * a non-atomic map. ->map() uses the kmap_atomic slot for
- * atomic maps, you have to be careful if mapping another page as
- * source or destination for a copy.
- */
- void * (*map)(struct pipe_inode_info *, struct pipe_buffer *, int);
-
- /*
- * Undoes ->map(), finishes the virtual mapping of the pipe buffer.
- */
- void (*unmap)(struct pipe_inode_info *, struct pipe_buffer *, void *);
-
/*
* ->confirm() verifies that the data in the pipe buffer is there
* and that the contents are good. If the pages in the pipe belong
void free_pipe_info(struct pipe_inode_info *);
/* Generic pipe buffer ops functions */
-void *generic_pipe_buf_map(struct pipe_inode_info *, struct pipe_buffer *, int);
-void generic_pipe_buf_unmap(struct pipe_inode_info *, struct pipe_buffer *, void *);
void generic_pipe_buf_get(struct pipe_inode_info *, struct pipe_buffer *);
int generic_pipe_buf_confirm(struct pipe_inode_info *, struct pipe_buffer *);
int generic_pipe_buf_steal(struct pipe_inode_info *, struct pipe_buffer *);
--- /dev/null
+/*
+ * This is for Renesas R-Car Audio-DMAC-peri-peri.
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This file is based on the include/linux/sh_dma.h
+ *
+ * Header for the new SH dmaengine driver
+ *
+ * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SH_AUDMAPP_H
+#define SH_AUDMAPP_H
+
+#include <linux/dmaengine.h>
+
+struct audmapp_slave_config {
+ int slave_id;
+ dma_addr_t src;
+ dma_addr_t dst;
+ u32 chcr;
+};
+
+struct audmapp_pdata {
+ struct audmapp_slave_config *slave;
+ int slave_num;
+};
+
+#endif /* SH_AUDMAPP_H */
-/* arch/arm/plat-s3c/include/plat/iic.h
- *
+/*
* Copyright 2004-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
+#ifndef __I2C_S3C2410_H
+#define __I2C_S3C2410_H __FILE__
#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */
extern struct s3c2410_platform_i2c default_i2c_data;
-#endif /* __ASM_ARCH_IIC_H */
+#endif /* __I2C_S3C2410_H */
-/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
- *
+/*
* Copyright (c) 2006 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
* published by the Free Software Foundation.
*/
-#ifndef __ASM_ARCH_LEDSGPIO_H
-#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
+#ifndef __LEDS_S3C24XX_H
+#define __LEDS_S3C24XX_H
#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */
#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */
char *def_trigger;
};
-#endif /* __ASM_ARCH_LEDSGPIO_H */
+#endif /* __LEDS_S3C24XX_H */
-/*
- * arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
+#ifndef __MMC_MSM_SDCC_H
+#define __MMC_MSM_SDCC_H
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
/*
- * arch/arm/plat-orion/include/plat/mvsdio.h
- *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#ifndef __MACH_MVSDIO_H
-#define __MACH_MVSDIO_H
+#ifndef __MMC_MVSDIO_H
+#define __MMC_MVSDIO_H
#include <linux/mbus.h>
}
+static inline int pid_alive(const struct task_struct *p);
+static inline pid_t task_ppid_nr_ns(const struct task_struct *tsk, struct pid_namespace *ns)
+{
+ pid_t pid = 0;
+
+ rcu_read_lock();
+ if (pid_alive(tsk))
+ pid = task_tgid_nr_ns(rcu_dereference(tsk->real_parent), ns);
+ rcu_read_unlock();
+
+ return pid;
+}
+
+static inline pid_t task_ppid_nr(const struct task_struct *tsk)
+{
+ return task_ppid_nr_ns(tsk, &init_pid_ns);
+}
+
static inline pid_t task_pgrp_nr_ns(struct task_struct *tsk,
struct pid_namespace *ns)
{
*
* Return: 1 if the process is alive. 0 otherwise.
*/
-static inline int pid_alive(struct task_struct *p)
+static inline int pid_alive(const struct task_struct *p)
{
return p->pids[PIDTYPE_PID].pid != NULL;
}
#define RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT (1UL << 9)
struct rpc_clnt *rpc_create(struct rpc_create_args *args);
+struct rpc_clnt *rpc_create_xprt(struct rpc_create_args *args,
+ struct rpc_xprt *xprt);
struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *,
const struct rpc_program *, u32);
void rpc_task_reset_client(struct rpc_task *task, struct rpc_clnt *clnt);
int svc_send(struct svc_rqst *);
void svc_drop(struct svc_rqst *);
void svc_sock_update_bufs(struct svc_serv *serv);
+bool svc_alien_sock(struct net *net, int fd);
int svc_addsock(struct svc_serv *serv, const int fd,
char *name_return, const size_t len);
void svc_init_xprt_sock(void);
void xprt_release_xprt(struct rpc_xprt *xprt, struct rpc_task *task);
void xprt_release_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task);
void xprt_release(struct rpc_task *task);
-struct rpc_xprt * xprt_get(struct rpc_xprt *xprt);
void xprt_put(struct rpc_xprt *xprt);
struct rpc_xprt * xprt_alloc(struct net *net, size_t size,
unsigned int num_prealloc,
unsigned int max_req);
void xprt_free(struct rpc_xprt *);
+/**
+ * xprt_get - return a reference to an RPC transport.
+ * @xprt: pointer to the transport
+ *
+ */
+static inline struct rpc_xprt *xprt_get(struct rpc_xprt *xprt)
+{
+ if (atomic_inc_not_zero(&xprt->count))
+ return xprt;
+ return NULL;
+}
+
static inline __be32 *xprt_skip_transport_header(struct rpc_xprt *xprt, __be32 *p)
{
return p + xprt->tsh_size;
static struct syscall_metadata __syscall_meta_##sname; \
static struct ftrace_event_call __used \
event_enter_##sname = { \
- .name = "sys_enter"#sname, \
.class = &event_class_syscall_enter, \
+ { \
+ .name = "sys_enter"#sname, \
+ }, \
.event.funcs = &enter_syscall_print_funcs, \
.data = (void *)&__syscall_meta_##sname,\
.flags = TRACE_EVENT_FL_CAP_ANY, \
static struct syscall_metadata __syscall_meta_##sname; \
static struct ftrace_event_call __used \
event_exit_##sname = { \
- .name = "sys_exit"#sname, \
.class = &event_class_syscall_exit, \
+ { \
+ .name = "sys_exit"#sname, \
+ }, \
.event.funcs = &exit_syscall_print_funcs, \
.data = (void *)&__syscall_meta_##sname,\
.flags = TRACE_EVENT_FL_CAP_ANY, \
*
* See Documentation/trace/tracepoints.txt.
*
- * (C) Copyright 2008 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
+ * Copyright (C) 2008-2014 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
*
* Heavily inspired from the Linux Kernel Markers.
*
struct module;
struct tracepoint;
+struct notifier_block;
struct tracepoint_func {
void *func;
struct tracepoint_func __rcu *funcs;
};
-/*
- * Connect a probe to a tracepoint.
- * Internal API, should not be used directly.
- */
-extern int tracepoint_probe_register(const char *name, void *probe, void *data);
-
-/*
- * Disconnect a probe from a tracepoint.
- * Internal API, should not be used directly.
- */
extern int
-tracepoint_probe_unregister(const char *name, void *probe, void *data);
+tracepoint_probe_register(struct tracepoint *tp, void *probe, void *data);
+extern int
+tracepoint_probe_unregister(struct tracepoint *tp, void *probe, void *data);
+extern void
+for_each_kernel_tracepoint(void (*fct)(struct tracepoint *tp, void *priv),
+ void *priv);
#ifdef CONFIG_MODULES
struct tp_module {
struct list_head list;
- unsigned int num_tracepoints;
- struct tracepoint * const *tracepoints_ptrs;
+ struct module *mod;
};
+
bool trace_module_has_bad_taint(struct module *mod);
+extern int register_tracepoint_module_notifier(struct notifier_block *nb);
+extern int unregister_tracepoint_module_notifier(struct notifier_block *nb);
#else
static inline bool trace_module_has_bad_taint(struct module *mod)
{
return false;
}
+static inline
+int register_tracepoint_module_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+static inline
+int unregister_tracepoint_module_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
#endif /* CONFIG_MODULES */
/*
synchronize_sched();
}
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+extern void syscall_regfunc(void);
+extern void syscall_unregfunc(void);
+#endif /* CONFIG_HAVE_SYSCALL_TRACEPOINTS */
+
#define PARAMS(args...) args
#endif /* _LINUX_TRACEPOINT_H */
static inline int \
register_trace_##name(void (*probe)(data_proto), void *data) \
{ \
- return tracepoint_probe_register(#name, (void *)probe, \
- data); \
+ return tracepoint_probe_register(&__tracepoint_##name, \
+ (void *)probe, data); \
} \
static inline int \
unregister_trace_##name(void (*probe)(data_proto), void *data) \
{ \
- return tracepoint_probe_unregister(#name, (void *)probe, \
- data); \
+ return tracepoint_probe_unregister(&__tracepoint_##name,\
+ (void *)probe, data); \
} \
static inline void \
check_trace_callback_type_##name(void (*cb)(data_proto)) \
#ifndef __LINUX_UIO_H
#define __LINUX_UIO_H
+#include <linux/kernel.h>
#include <uapi/linux/uio.h>
+struct page;
struct kvec {
void *iov_base; /* and that should *never* hold a userland pointer */
size_t iov_len;
};
+struct iov_iter {
+ const struct iovec *iov;
+ unsigned long nr_segs;
+ size_t iov_offset;
+ size_t count;
+};
+
/*
* Total number of bytes covered by an iovec.
*
return ret;
}
+static inline struct iovec iov_iter_iovec(const struct iov_iter *iter)
+{
+ return (struct iovec) {
+ .iov_base = iter->iov->iov_base + iter->iov_offset,
+ .iov_len = min(iter->count,
+ iter->iov->iov_len - iter->iov_offset),
+ };
+}
+
+#define iov_for_each(iov, iter, start) \
+ for (iter = (start); \
+ (iter).count && \
+ ((iov = iov_iter_iovec(&(iter))), 1); \
+ iov_iter_advance(&(iter), (iov).iov_len))
+
unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+size_t iov_iter_copy_from_user_atomic(struct page *page,
+ struct iov_iter *i, unsigned long offset, size_t bytes);
+size_t iov_iter_copy_from_user(struct page *page,
+ struct iov_iter *i, unsigned long offset, size_t bytes);
+void iov_iter_advance(struct iov_iter *i, size_t bytes);
+int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes);
+size_t iov_iter_single_seg_count(const struct iov_iter *i);
+size_t copy_page_to_iter(struct page *page, size_t offset, size_t bytes,
+ struct iov_iter *i);
+
+static inline void iov_iter_init(struct iov_iter *i,
+ const struct iovec *iov, unsigned long nr_segs,
+ size_t count, size_t written)
+{
+ i->iov = iov;
+ i->nr_segs = nr_segs;
+ i->iov_offset = 0;
+ i->count = count + written;
+
+ iov_iter_advance(i, written);
+}
+
+static inline size_t iov_iter_count(struct iov_iter *i)
+{
+ return i->count;
+}
+
int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
int memcpy_toiovec(struct iovec *iov, unsigned char *kdata, int len);
+
#endif
/**
* struct rc_dev - represents a remote control device
* @dev: driver model's view of this device
+ * @sysfs_groups: sysfs attribute groups
* @input_name: name of the input child device
* @input_phys: physical path to the input child device
* @input_id: id of the input child device (struct input_id)
* device doesn't interrupt host until it sees IR pulses
* @s_learning_mode: enable wide band receiver used for learning
* @s_carrier_report: enable carrier reports
- * @s_filter: set the scancode filter of a given type
+ * @s_filter: set the scancode filter
+ * @s_wakeup_filter: set the wakeup scancode filter
*/
struct rc_dev {
struct device dev;
+ const struct attribute_group *sysfs_groups[5];
const char *input_name;
const char *input_phys;
struct input_id input_id;
int (*s_learning_mode)(struct rc_dev *dev, int enable);
int (*s_carrier_report) (struct rc_dev *dev, int enable);
int (*s_filter)(struct rc_dev *dev,
- enum rc_filter_type type,
struct rc_scancode_filter *filter);
+ int (*s_wakeup_filter)(struct rc_dev *dev,
+ struct rc_scancode_filter *filter);
};
#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
* @REQ_STATUS_ALLOC: request has been allocated but not sent
* @REQ_STATUS_UNSENT: request waiting to be sent
* @REQ_STATUS_SENT: request sent to server
- * @REQ_STATUS_FLSH: a flush has been sent for this request
* @REQ_STATUS_RCVD: response received from server
* @REQ_STATUS_FLSHD: request has been flushed
* @REQ_STATUS_ERROR: request encountered an error on the client side
REQ_STATUS_ALLOC,
REQ_STATUS_UNSENT,
REQ_STATUS_SENT,
- REQ_STATUS_FLSH,
REQ_STATUS_RCVD,
REQ_STATUS_FLSHD,
REQ_STATUS_ERROR,
* @proto_version: 9P protocol version to use
* @trans_mod: module API instantiated with this client
* @trans: tranport instance state and API
- * @conn: connection state information used by trans_fd
* @fidpool: fid handle accounting for session
* @fidlist: List of active fid handles
* @tagpool - transaction id accounting for session
struct p9_trans_module *trans_mod;
enum p9_trans_status status;
void *trans;
- struct p9_conn *conn;
struct p9_idpool *fidpool;
struct list_head fidlist;
int p9_client_lock_dotl(struct p9_fid *fid, struct p9_flock *flock, u8 *status);
int p9_client_getlock_dotl(struct p9_fid *fid, struct p9_getlock *fl);
struct p9_req_t *p9_tag_lookup(struct p9_client *, u16);
-void p9_client_cb(struct p9_client *c, struct p9_req_t *req);
+void p9_client_cb(struct p9_client *c, struct p9_req_t *req, int status);
int p9_parse_header(struct p9_fcall *, int32_t *, int8_t *, int16_t *, int);
int p9stat_read(struct p9_client *, char *, int, struct p9_wstat *);
* @close: member function to discard a connection on this transport
* @request: member function to issue a request to the transport
* @cancel: member function to cancel a request (if it hasn't been sent)
+ * @cancelled: member function to notify that a cancelled request will not
+ * not receive a reply
*
* This is the basic API for a transport module which is registered by the
* transport module with the 9P core network module and used by the client
void (*close) (struct p9_client *);
int (*request) (struct p9_client *, struct p9_req_t *req);
int (*cancel) (struct p9_client *, struct p9_req_t *req);
+ int (*cancelled)(struct p9_client *, struct p9_req_t *req);
int (*zc_request)(struct p9_client *, struct p9_req_t *,
char *, char *, int , int, int, int);
};
extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
int data_direction, void *buffer, unsigned bufflen,
unsigned char *sense, int timeout, int retries,
- int flag, int *resid);
+ u64 flags, int *resid);
extern int scsi_execute_req_flags(struct scsi_device *sdev,
const unsigned char *cmd, int data_direction, void *buffer,
unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
- int retries, int *resid, int flags);
+ int retries, int *resid, u64 flags);
static inline int scsi_execute_req(struct scsi_device *sdev,
const unsigned char *cmd, int data_direction, void *buffer,
unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout,
struct snd_pcm_substream;
+int snd_cs8427_init(struct snd_i2c_bus *bus, struct snd_i2c_device *device);
int snd_cs8427_create(struct snd_i2c_bus *bus, unsigned char addr,
unsigned int reset_timeout, struct snd_i2c_device **r_cs8427);
int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
int (*iscsit_get_dataout)(struct iscsi_conn *, struct iscsi_cmd *, bool);
int (*iscsit_queue_data_in)(struct iscsi_conn *, struct iscsi_cmd *);
int (*iscsit_queue_status)(struct iscsi_conn *, struct iscsi_cmd *);
+ void (*iscsit_aborted_task)(struct iscsi_conn *, struct iscsi_cmd *);
+ enum target_prot_op (*iscsit_get_sup_prot_ops)(struct iscsi_conn *);
};
static inline void *iscsit_priv_cmd(struct iscsi_cmd *cmd)
sense_reason_t (*do_unmap_fn)(struct se_cmd *cmd, void *priv,
sector_t lba, sector_t nolb),
void *priv);
+void sbc_dif_generate(struct se_cmd *);
sense_reason_t sbc_dif_verify_write(struct se_cmd *, sector_t, unsigned int,
unsigned int, struct scatterlist *, int);
sense_reason_t sbc_dif_verify_read(struct se_cmd *, sector_t, unsigned int,
unsigned int, struct scatterlist *, int);
+sense_reason_t sbc_dif_read_strip(struct se_cmd *);
void transport_set_vpd_proto_id(struct t10_vpd *, unsigned char *);
int transport_set_vpd_assoc(struct t10_vpd *, unsigned char *);
SCF_SENT_CHECK_CONDITION = 0x00000800,
SCF_OVERFLOW_BIT = 0x00001000,
SCF_UNDERFLOW_BIT = 0x00002000,
- SCF_SENT_DELAYED_TAS = 0x00004000,
+ SCF_SEND_DELAYED_TAS = 0x00004000,
SCF_ALUA_NON_OPTIMIZED = 0x00008000,
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00020000,
SCF_ACK_KREF = 0x00040000,
};
enum target_prot_op {
- TARGET_PROT_NORMAL = 0,
- TARGET_PROT_DIN_INSERT,
- TARGET_PROT_DOUT_INSERT,
- TARGET_PROT_DIN_STRIP,
- TARGET_PROT_DOUT_STRIP,
- TARGET_PROT_DIN_PASS,
- TARGET_PROT_DOUT_PASS,
+ TARGET_PROT_NORMAL = 0,
+ TARGET_PROT_DIN_INSERT = (1 << 0),
+ TARGET_PROT_DOUT_INSERT = (1 << 1),
+ TARGET_PROT_DIN_STRIP = (1 << 2),
+ TARGET_PROT_DOUT_STRIP = (1 << 3),
+ TARGET_PROT_DIN_PASS = (1 << 4),
+ TARGET_PROT_DOUT_PASS = (1 << 5),
};
-enum target_prot_ho {
- PROT_SEPERATED,
- PROT_INTERLEAVED,
-};
+#define TARGET_PROT_ALL TARGET_PROT_DIN_INSERT | TARGET_PROT_DOUT_INSERT | \
+ TARGET_PROT_DIN_STRIP | TARGET_PROT_DOUT_STRIP | \
+ TARGET_PROT_DIN_PASS | TARGET_PROT_DOUT_PASS
enum target_prot_type {
TARGET_DIF_TYPE0_PROT,
TARGET_DIF_TYPE3_PROT,
};
+enum target_core_dif_check {
+ TARGET_DIF_CHECK_GUARD = 0x1 << 0,
+ TARGET_DIF_CHECK_APPTAG = 0x1 << 1,
+ TARGET_DIF_CHECK_REFTAG = 0x1 << 2,
+};
+
struct se_dif_v1_tuple {
__be16 guard_tag;
__be16 app_tag;
/* DIF related members */
enum target_prot_op prot_op;
enum target_prot_type prot_type;
+ u8 prot_checks;
u32 prot_length;
u32 reftag_seed;
struct scatterlist *t_prot_sg;
unsigned int t_prot_nents;
- enum target_prot_ho prot_handover;
sense_reason_t pi_err;
sector_t bad_sector;
+ bool prot_pto;
};
struct se_ua {
struct se_session {
unsigned sess_tearing_down:1;
u64 sess_bin_isid;
+ enum target_prot_op sup_prot_ops;
struct se_node_acl *se_node_acl;
struct se_portal_group *se_tpg;
void *fabric_sess_ptr;
int (*queue_data_in)(struct se_cmd *);
int (*queue_status)(struct se_cmd *);
void (*queue_tm_rsp)(struct se_cmd *);
+ void (*aborted_task)(struct se_cmd *);
/*
* fabric module calls for target_core_fabric_configfs.c
*/
void (*fabric_drop_nodeacl)(struct se_node_acl *);
};
-struct se_session *transport_init_session(void);
+struct se_session *transport_init_session(enum target_prot_op);
int transport_alloc_session_tags(struct se_session *, unsigned int,
unsigned int);
-struct se_session *transport_init_session_tags(unsigned int, unsigned int);
+struct se_session *transport_init_session_tags(unsigned int, unsigned int,
+ enum target_prot_op);
void __transport_register_session(struct se_portal_group *,
struct se_node_acl *, struct se_session *, void *);
void transport_register_session(struct se_portal_group *,
--- /dev/null
+/* I2C and SMBUS message transfer tracepoints
+ *
+ * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM i2c
+
+#if !defined(_TRACE_I2C_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_I2C_H
+
+#include <linux/i2c.h>
+#include <linux/tracepoint.h>
+
+/*
+ * drivers/i2c/i2c-core.c
+ */
+extern void i2c_transfer_trace_reg(void);
+extern void i2c_transfer_trace_unreg(void);
+
+/*
+ * __i2c_transfer() write request
+ */
+TRACE_EVENT_FN(i2c_write,
+ TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+ int num),
+ TP_ARGS(adap, msg, num),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, msg_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u16, len )
+ __dynamic_array(__u8, buf, msg->len) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->msg_nr = num;
+ __entry->addr = msg->addr;
+ __entry->flags = msg->flags;
+ __entry->len = msg->len;
+ memcpy(__get_dynamic_array(buf), msg->buf, msg->len);
+ ),
+ TP_printk("i2c-%d #%u a=%03x f=%04x l=%u [%*phD]",
+ __entry->adapter_nr,
+ __entry->msg_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->len,
+ __entry->len, __get_dynamic_array(buf)
+ ),
+ i2c_transfer_trace_reg,
+ i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() read request
+ */
+TRACE_EVENT_FN(i2c_read,
+ TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+ int num),
+ TP_ARGS(adap, msg, num),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, msg_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u16, len )
+ ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->msg_nr = num;
+ __entry->addr = msg->addr;
+ __entry->flags = msg->flags;
+ __entry->len = msg->len;
+ ),
+ TP_printk("i2c-%d #%u a=%03x f=%04x l=%u",
+ __entry->adapter_nr,
+ __entry->msg_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->len
+ ),
+ i2c_transfer_trace_reg,
+ i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() read reply
+ */
+TRACE_EVENT_FN(i2c_reply,
+ TP_PROTO(const struct i2c_adapter *adap, const struct i2c_msg *msg,
+ int num),
+ TP_ARGS(adap, msg, num),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, msg_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u16, len )
+ __dynamic_array(__u8, buf, msg->len) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->msg_nr = num;
+ __entry->addr = msg->addr;
+ __entry->flags = msg->flags;
+ __entry->len = msg->len;
+ memcpy(__get_dynamic_array(buf), msg->buf, msg->len);
+ ),
+ TP_printk("i2c-%d #%u a=%03x f=%04x l=%u [%*phD]",
+ __entry->adapter_nr,
+ __entry->msg_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->len,
+ __entry->len, __get_dynamic_array(buf)
+ ),
+ i2c_transfer_trace_reg,
+ i2c_transfer_trace_unreg);
+
+/*
+ * __i2c_transfer() result
+ */
+TRACE_EVENT_FN(i2c_result,
+ TP_PROTO(const struct i2c_adapter *adap, int num, int ret),
+ TP_ARGS(adap, num, ret),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, nr_msgs )
+ __field(__s16, ret )
+ ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->nr_msgs = num;
+ __entry->ret = ret;
+ ),
+ TP_printk("i2c-%d n=%u ret=%d",
+ __entry->adapter_nr,
+ __entry->nr_msgs,
+ __entry->ret
+ ),
+ i2c_transfer_trace_reg,
+ i2c_transfer_trace_unreg);
+
+/*
+ * i2c_smbus_xfer() write data or procedure call request
+ */
+TRACE_EVENT_CONDITION(smbus_write,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ const union i2c_smbus_data *data),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+ TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
+ protocol == I2C_SMBUS_PROC_CALL ||
+ protocol == I2C_SMBUS_BLOCK_PROC_CALL),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, command )
+ __field(__u8, len )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+
+ switch (protocol) {
+ case I2C_SMBUS_BYTE_DATA:
+ __entry->len = 1;
+ goto copy;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ __entry->len = 2;
+ goto copy;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ __entry->len = data->block[0] + 1;
+ copy:
+ memcpy(__entry->buf, data->block, __entry->len);
+ break;
+ case I2C_SMBUS_QUICK:
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_I2C_BLOCK_BROKEN:
+ default:
+ __entry->len = 0;
+ }
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->len,
+ __entry->len, __entry->buf
+ ));
+
+/*
+ * i2c_smbus_xfer() read data request
+ */
+TRACE_EVENT_CONDITION(smbus_read,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol),
+ TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
+ protocol == I2C_SMBUS_PROC_CALL ||
+ protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, flags )
+ __field(__u16, addr )
+ __field(__u8, command )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" })
+ ));
+
+/*
+ * i2c_smbus_xfer() read data or procedure call reply
+ */
+TRACE_EVENT_CONDITION(smbus_reply,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ const union i2c_smbus_data *data),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+ TP_CONDITION(read_write == I2C_SMBUS_READ),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, command )
+ __field(__u8, len )
+ __field(__u32, protocol )
+ __array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2) ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->command = command;
+ __entry->protocol = protocol;
+
+ switch (protocol) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ __entry->len = 1;
+ goto copy;
+ case I2C_SMBUS_WORD_DATA:
+ case I2C_SMBUS_PROC_CALL:
+ __entry->len = 2;
+ goto copy;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ __entry->len = data->block[0] + 1;
+ copy:
+ memcpy(__entry->buf, data->block, __entry->len);
+ break;
+ case I2C_SMBUS_QUICK:
+ case I2C_SMBUS_I2C_BLOCK_BROKEN:
+ default:
+ __entry->len = 0;
+ }
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->len,
+ __entry->len, __entry->buf
+ ));
+
+/*
+ * i2c_smbus_xfer() result
+ */
+TRACE_EVENT(smbus_result,
+ TP_PROTO(const struct i2c_adapter *adap,
+ u16 addr, unsigned short flags,
+ char read_write, u8 command, int protocol,
+ int res),
+ TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
+ TP_STRUCT__entry(
+ __field(int, adapter_nr )
+ __field(__u16, addr )
+ __field(__u16, flags )
+ __field(__u8, read_write )
+ __field(__u8, command )
+ __field(__s16, res )
+ __field(__u32, protocol )
+ ),
+ TP_fast_assign(
+ __entry->adapter_nr = adap->nr;
+ __entry->addr = addr;
+ __entry->flags = flags;
+ __entry->read_write = read_write;
+ __entry->command = command;
+ __entry->protocol = protocol;
+ __entry->res = res;
+ ),
+ TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
+ __entry->adapter_nr,
+ __entry->addr,
+ __entry->flags,
+ __entry->command,
+ __print_symbolic(__entry->protocol,
+ { I2C_SMBUS_QUICK, "QUICK" },
+ { I2C_SMBUS_BYTE, "BYTE" },
+ { I2C_SMBUS_BYTE_DATA, "BYTE_DATA" },
+ { I2C_SMBUS_WORD_DATA, "WORD_DATA" },
+ { I2C_SMBUS_PROC_CALL, "PROC_CALL" },
+ { I2C_SMBUS_BLOCK_DATA, "BLOCK_DATA" },
+ { I2C_SMBUS_I2C_BLOCK_BROKEN, "I2C_BLOCK_BROKEN" },
+ { I2C_SMBUS_BLOCK_PROC_CALL, "BLOCK_PROC_CALL" },
+ { I2C_SMBUS_I2C_BLOCK_DATA, "I2C_BLOCK_DATA" }),
+ __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
+ __entry->res
+ ));
+
+#endif /* _TRACE_I2C_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
-extern void syscall_regfunc(void);
-extern void syscall_unregfunc(void);
-
TRACE_EVENT_FN(sys_enter,
TP_PROTO(struct pt_regs *regs, long id),
* };
*
* static struct ftrace_event_call event_<call> = {
- * .name = "<call>",
* .class = event_class_<template>,
+ * {
+ * .tp = &__tracepoint_<call>,
+ * },
* .event = &ftrace_event_type_<call>,
* .print_fmt = print_fmt_<call>,
+ * .flags = TRACE_EVENT_FL_TRACEPOINT,
* };
* // its only safe to use pointers when doing linker tricks to
* // create an array.
#define DEFINE_EVENT(template, call, proto, args) \
\
static struct ftrace_event_call __used event_##call = { \
- .name = #call, \
.class = &event_class_##template, \
+ { \
+ .tp = &__tracepoint_##call, \
+ }, \
.event.funcs = &ftrace_event_type_funcs_##template, \
.print_fmt = print_fmt_##template, \
+ .flags = TRACE_EVENT_FL_TRACEPOINT, \
}; \
static struct ftrace_event_call __used \
__attribute__((section("_ftrace_events"))) *__event_##call = &event_##call
static const char print_fmt_##call[] = print; \
\
static struct ftrace_event_call __used event_##call = { \
- .name = #call, \
.class = &event_class_##template, \
+ { \
+ .tp = &__tracepoint_##call, \
+ }, \
.event.funcs = &ftrace_event_type_funcs_##call, \
.print_fmt = print_fmt_##call, \
+ .flags = TRACE_EVENT_FL_TRACEPOINT, \
}; \
static struct ftrace_event_call __used \
__attribute__((section("_ftrace_events"))) *__event_##call = &event_##call
#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */
#define AUDIT_SET_FEATURE 1018 /* Turn an audit feature on or off */
#define AUDIT_GET_FEATURE 1019 /* Get which features are enabled */
-#define AUDIT_FEATURE_CHANGE 1020 /* audit log listing feature changes */
#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */
#define AUDIT_USER_AVC 1107 /* We filter this differently */
#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */
#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */
#define AUDIT_SECCOMP 1326 /* Secure Computing event */
+#define AUDIT_PROCTITLE 1327 /* Proctitle emit event */
+#define AUDIT_FEATURE_CHANGE 1328 /* audit log listing feature changes */
#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */
#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */
#define CAP_LEASE 28
+/* Allow writing the audit log via unicast netlink socket */
+
#define CAP_AUDIT_WRITE 29
+/* Allow configuration of audit via unicast netlink socket */
+
#define CAP_AUDIT_CONTROL 30
#define CAP_SETFCAP 31
NVME_SC_REFTAG_CHECK = 0x284,
NVME_SC_COMPARE_FAILED = 0x285,
NVME_SC_ACCESS_DENIED = 0x286,
+ NVME_SC_DNR = 0x4000,
};
struct nvme_completion {
#ifndef __V4L2_COMMON__
#define __V4L2_COMMON__
+#include <linux/types.h>
+
/*
*
* Selection interface definitions
logging of avc messages output). Does not do system-call
auditing without CONFIG_AUDITSYSCALL.
+config HAVE_ARCH_AUDITSYSCALL
+ bool
+
config AUDITSYSCALL
bool "Enable system-call auditing support"
- depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA)
+ depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
default y if SECURITY_SELINUX
help
Enable low-overhead system-call auditing infrastructure that
struct audit_reply {
__u32 portid;
- struct net *net;
+ struct net *net;
struct sk_buff *skb;
};
if (printk_ratelimit())
pr_notice("type=%d %s\n", nlh->nlmsg_type, data);
else
- audit_log_lost("printk limit exceeded\n");
+ audit_log_lost("printk limit exceeded");
}
audit_hold_skb(skb);
BUG_ON(err != -ECONNREFUSED); /* Shouldn't happen */
if (audit_pid) {
pr_err("*NO* daemon at audit_pid=%d\n", audit_pid);
- audit_log_lost("auditd disappeared\n");
+ audit_log_lost("auditd disappeared");
audit_pid = 0;
audit_sock = NULL;
}
{
int err = 0;
- /* Only support the initial namespaces for now. */
+ /* Only support initial user namespace for now. */
/*
* We return ECONNREFUSED because it tricks userspace into thinking
* that audit was not configured into the kernel. Lots of users
* userspace will reject all logins. This should be removed when we
* support non init namespaces!!
*/
- if ((current_user_ns() != &init_user_ns) ||
- (task_active_pid_ns(current) != &init_pid_ns))
+ if (current_user_ns() != &init_user_ns)
return -ECONNREFUSED;
switch (msg_type) {
case AUDIT_TTY_SET:
case AUDIT_TRIM:
case AUDIT_MAKE_EQUIV:
+ /* Only support auditd and auditctl in initial pid namespace
+ * for now. */
+ if ((task_active_pid_ns(current) != &init_pid_ns))
+ return -EPERM;
+
if (!capable(CAP_AUDIT_CONTROL))
err = -EPERM;
break;
{
int rc = 0;
uid_t uid = from_kuid(&init_user_ns, current_uid());
+ pid_t pid = task_tgid_nr(current);
if (!audit_enabled && msg_type != AUDIT_USER_AVC) {
*ab = NULL;
*ab = audit_log_start(NULL, GFP_KERNEL, msg_type);
if (unlikely(!*ab))
return rc;
- audit_log_format(*ab, "pid=%d uid=%u", task_tgid_vnr(current), uid);
+ audit_log_format(*ab, "pid=%d uid=%u", pid, uid);
audit_log_session_info(*ab);
audit_log_task_context(*ab);
audit_sock = NULL;
}
- rcu_assign_pointer(aunet->nlsk, NULL);
+ RCU_INIT_POINTER(aunet->nlsk, NULL);
synchronize_net();
netlink_kernel_release(sock);
}
spin_unlock_irq(&tsk->sighand->siglock);
audit_log_format(ab,
- " ppid=%ld pid=%d auid=%u uid=%u gid=%u"
+ " ppid=%d pid=%d auid=%u uid=%u gid=%u"
" euid=%u suid=%u fsuid=%u"
" egid=%u sgid=%u fsgid=%u tty=%s ses=%u",
- sys_getppid(),
- tsk->pid,
+ task_ppid_nr(tsk),
+ task_pid_nr(tsk),
from_kuid(&init_user_ns, audit_get_loginuid(tsk)),
from_kuid(&init_user_ns, cred->uid),
from_kgid(&init_user_ns, cred->gid),
bool should_free;
};
+struct audit_proctitle {
+ int len; /* length of the cmdline field. */
+ char *value; /* the cmdline field */
+};
+
/* The per-task audit context. */
struct audit_context {
int dummy; /* must be the first element */
} execve;
};
int fds[2];
+ struct audit_proctitle proctitle;
#if AUDIT_DEBUG
int put_count;
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/audit.h>
#include <linux/kthread.h>
#endif
/* Common user-space to kernel rule translation. */
-static inline struct audit_entry *audit_to_entry_common(struct audit_rule *rule)
+static inline struct audit_entry *audit_to_entry_common(struct audit_rule_data *rule)
{
unsigned listnr;
struct audit_entry *entry;
;
}
if (unlikely(rule->action == AUDIT_POSSIBLE)) {
- printk(KERN_ERR "AUDIT_POSSIBLE is deprecated\n");
+ pr_err("AUDIT_POSSIBLE is deprecated\n");
goto exit_err;
}
if (rule->action != AUDIT_NEVER && rule->action != AUDIT_ALWAYS)
int i;
char *str;
- entry = audit_to_entry_common((struct audit_rule *)data);
+ entry = audit_to_entry_common(data);
if (IS_ERR(entry))
goto exit_nofree;
f->val = 0;
}
+ if ((f->type == AUDIT_PID) || (f->type == AUDIT_PPID)) {
+ struct pid *pid;
+ rcu_read_lock();
+ pid = find_vpid(f->val);
+ if (!pid) {
+ rcu_read_unlock();
+ err = -ESRCH;
+ goto exit_free;
+ }
+ f->val = pid_nr(pid);
+ rcu_read_unlock();
+ }
+
err = audit_field_valid(entry, f);
if (err)
goto exit_free;
/* Keep currently invalid fields around in case they
* become valid after a policy reload. */
if (err == -EINVAL) {
- printk(KERN_WARNING "audit rule for LSM "
- "\'%s\' is invalid\n", str);
+ pr_warn("audit rule for LSM \'%s\' is invalid\n",
+ str);
err = 0;
}
if (err) {
/* Keep currently invalid fields around in case they
* become valid after a policy reload. */
if (ret == -EINVAL) {
- printk(KERN_WARNING "audit rule for LSM \'%s\' is "
- "invalid\n", df->lsm_str);
+ pr_warn("audit rule for LSM \'%s\' is invalid\n",
+ df->lsm_str);
ret = 0;
}
for (i = 0; i < rule->field_count; i++) {
struct audit_field *f = &rule->fields[i];
+ pid_t pid;
int result = 0;
u32 sid;
switch (f->type) {
case AUDIT_PID:
- result = audit_comparator(task_pid_vnr(current), f->op, f->val);
+ pid = task_pid_nr(current);
+ result = audit_comparator(pid, f->op, f->val);
break;
case AUDIT_UID:
result = audit_uid_comparator(current_uid(), f->op, f->uid);
* and <dustin.kirkland@us.ibm.com> for LSPP certification compliance.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <asm/types.h>
#include <linux/atomic.h>
#include <linux/capability.h>
#include <linux/fs_struct.h>
#include <linux/compat.h>
+#include <linux/ctype.h>
#include "audit.h"
/* no execve audit message should be longer than this (userspace limits) */
#define MAX_EXECVE_AUDIT_LEN 7500
+/* max length to print of cmdline/proctitle value during audit */
+#define MAX_PROCTITLE_AUDIT_LEN 128
+
/* number of audit rules */
int audit_n_rules;
struct audit_field *f = &rule->fields[i];
struct audit_names *n;
int result = 0;
+ pid_t pid;
switch (f->type) {
case AUDIT_PID:
- result = audit_comparator(tsk->pid, f->op, f->val);
+ pid = task_pid_nr(tsk);
+ result = audit_comparator(pid, f->op, f->val);
break;
case AUDIT_PPID:
if (ctx) {
if (!ctx->ppid)
- ctx->ppid = sys_getppid();
+ ctx->ppid = task_ppid_nr(tsk);
result = audit_comparator(ctx->ppid, f->op, f->val);
}
break;
rcu_read_unlock();
}
-static inline struct audit_context *audit_get_context(struct task_struct *tsk,
+/* Transfer the audit context pointer to the caller, clearing it in the tsk's struct */
+static inline struct audit_context *audit_take_context(struct task_struct *tsk,
int return_valid,
long return_code)
{
return context;
}
+static inline void audit_proctitle_free(struct audit_context *context)
+{
+ kfree(context->proctitle.value);
+ context->proctitle.value = NULL;
+ context->proctitle.len = 0;
+}
+
static inline void audit_free_names(struct audit_context *context)
{
struct audit_names *n, *next;
if (context->put_count + context->ino_count != context->name_count) {
int i = 0;
- printk(KERN_ERR "%s:%d(:%d): major=%d in_syscall=%d"
- " name_count=%d put_count=%d"
- " ino_count=%d [NOT freeing]\n",
- __FILE__, __LINE__,
+ pr_err("%s:%d(:%d): major=%d in_syscall=%d"
+ " name_count=%d put_count=%d ino_count=%d"
+ " [NOT freeing]\n", __FILE__, __LINE__,
context->serial, context->major, context->in_syscall,
context->name_count, context->put_count,
context->ino_count);
list_for_each_entry(n, &context->names_list, list) {
- printk(KERN_ERR "names[%d] = %p = %s\n", i++,
- n->name, n->name->name ?: "(null)");
+ pr_err("names[%d] = %p = %s\n", i++, n->name,
+ n->name->name ?: "(null)");
}
dump_stack();
return;
audit_free_aux(context);
kfree(context->filterkey);
kfree(context->sockaddr);
+ audit_proctitle_free(context);
kfree(context);
}
*/
buf = kmalloc(MAX_EXECVE_AUDIT_LEN + 1, GFP_KERNEL);
if (!buf) {
- audit_panic("out of memory for argv string\n");
+ audit_panic("out of memory for argv string");
return;
}
audit_log_end(ab);
}
+static inline int audit_proctitle_rtrim(char *proctitle, int len)
+{
+ char *end = proctitle + len - 1;
+ while (end > proctitle && !isprint(*end))
+ end--;
+
+ /* catch the case where proctitle is only 1 non-print character */
+ len = end - proctitle + 1;
+ len -= isprint(proctitle[len-1]) == 0;
+ return len;
+}
+
+static void audit_log_proctitle(struct task_struct *tsk,
+ struct audit_context *context)
+{
+ int res;
+ char *buf;
+ char *msg = "(null)";
+ int len = strlen(msg);
+ struct audit_buffer *ab;
+
+ ab = audit_log_start(context, GFP_KERNEL, AUDIT_PROCTITLE);
+ if (!ab)
+ return; /* audit_panic or being filtered */
+
+ audit_log_format(ab, "proctitle=");
+
+ /* Not cached */
+ if (!context->proctitle.value) {
+ buf = kmalloc(MAX_PROCTITLE_AUDIT_LEN, GFP_KERNEL);
+ if (!buf)
+ goto out;
+ /* Historically called this from procfs naming */
+ res = get_cmdline(tsk, buf, MAX_PROCTITLE_AUDIT_LEN);
+ if (res == 0) {
+ kfree(buf);
+ goto out;
+ }
+ res = audit_proctitle_rtrim(buf, res);
+ if (res == 0) {
+ kfree(buf);
+ goto out;
+ }
+ context->proctitle.value = buf;
+ context->proctitle.len = res;
+ }
+ msg = context->proctitle.value;
+ len = context->proctitle.len;
+out:
+ audit_log_n_untrustedstring(ab, msg, len);
+ audit_log_end(ab);
+}
+
static void audit_log_exit(struct audit_context *context, struct task_struct *tsk)
{
int i, call_panic = 0;
audit_log_name(context, n, NULL, i++, &call_panic);
}
+ audit_log_proctitle(tsk, context);
+
/* Send end of event record to help user space know we are finished */
ab = audit_log_start(context, GFP_KERNEL, AUDIT_EOE);
if (ab)
{
struct audit_context *context;
- context = audit_get_context(tsk, 0, 0);
+ context = audit_take_context(tsk, 0, 0);
if (!context)
return;
else
success = AUDITSC_FAILURE;
- context = audit_get_context(tsk, success, return_code);
+ context = audit_take_context(tsk, success, return_code);
if (!context)
return;
if (likely(put_tree_ref(context, chunk)))
return;
if (unlikely(!grow_tree_refs(context))) {
- printk(KERN_WARNING "out of memory, audit has lost a tree reference\n");
+ pr_warn("out of memory, audit has lost a tree reference\n");
audit_set_auditable(context);
audit_put_chunk(chunk);
unroll_tree_refs(context, p, count);
goto retry;
}
/* too bad */
- printk(KERN_WARNING
- "out of memory, audit has lost a tree reference\n");
+ pr_warn("out of memory, audit has lost a tree reference\n");
unroll_tree_refs(context, p, count);
audit_set_auditable(context);
return;
if (!context->in_syscall) {
#if AUDIT_DEBUG == 2
- printk(KERN_ERR "%s:%d(:%d): ignoring getname(%p)\n",
+ pr_err("%s:%d(:%d): ignoring getname(%p)\n",
__FILE__, __LINE__, context->serial, name);
dump_stack();
#endif
BUG_ON(!context);
if (!name->aname || !context->in_syscall) {
#if AUDIT_DEBUG == 2
- printk(KERN_ERR "%s:%d(:%d): final_putname(%p)\n",
+ pr_err("%s:%d(:%d): final_putname(%p)\n",
__FILE__, __LINE__, context->serial, name);
if (context->name_count) {
struct audit_names *n;
int i = 0;
list_for_each_entry(n, &context->names_list, list)
- printk(KERN_ERR "name[%d] = %p = %s\n", i++,
- n->name, n->name->name ?: "(null)");
+ pr_err("name[%d] = %p = %s\n", i++, n->name,
+ n->name->name ?: "(null)");
}
#endif
final_putname(name);
else {
++context->put_count;
if (context->put_count > context->name_count) {
- printk(KERN_ERR "%s:%d(:%d): major=%d"
- " in_syscall=%d putname(%p) name_count=%d"
- " put_count=%d\n",
+ pr_err("%s:%d(:%d): major=%d in_syscall=%d putname(%p)"
+ " name_count=%d put_count=%d\n",
__FILE__, __LINE__,
context->serial, context->major,
context->in_syscall, name->name,
ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_LOGIN);
if (!ab)
return;
- audit_log_format(ab, "pid=%d uid=%u"
- " old-auid=%u new-auid=%u old-ses=%u new-ses=%u"
- " res=%d",
- current->pid, uid,
- oldloginuid, loginuid, oldsessionid, sessionid,
- !rc);
+ audit_log_format(ab, "pid=%d uid=%u", task_pid_nr(current), uid);
+ audit_log_task_context(ab);
+ audit_log_format(ab, " old-auid=%u auid=%u old-ses=%u ses=%u res=%d",
+ oldloginuid, loginuid, oldsessionid, sessionid, !rc);
audit_log_end(ab);
}
{
struct audit_context *context = current->audit_context;
- context->target_pid = t->pid;
+ context->target_pid = task_pid_nr(t);
context->target_auid = audit_get_loginuid(t);
context->target_uid = task_uid(t);
context->target_sessionid = audit_get_sessionid(t);
if (audit_pid && t->tgid == audit_pid) {
if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) {
- audit_sig_pid = tsk->pid;
+ audit_sig_pid = task_pid_nr(tsk);
if (uid_valid(tsk->loginuid))
audit_sig_uid = tsk->loginuid;
else
/* optimize the common case by putting first signal recipient directly
* in audit_context */
if (!ctx->target_pid) {
- ctx->target_pid = t->tgid;
+ ctx->target_pid = task_tgid_nr(t);
ctx->target_auid = audit_get_loginuid(t);
ctx->target_uid = t_uid;
ctx->target_sessionid = audit_get_sessionid(t);
}
BUG_ON(axp->pid_count >= AUDIT_AUX_PIDS);
- axp->target_pid[axp->pid_count] = t->tgid;
+ axp->target_pid[axp->pid_count] = task_tgid_nr(t);
axp->target_auid[axp->pid_count] = audit_get_loginuid(t);
axp->target_uid[axp->pid_count] = t_uid;
axp->target_sessionid[axp->pid_count] = audit_get_sessionid(t);
from_kgid(&init_user_ns, gid),
sessionid);
audit_log_task_context(ab);
- audit_log_format(ab, " pid=%d comm=", current->pid);
+ audit_log_format(ab, " pid=%d comm=", task_pid_nr(current));
audit_log_untrustedstring(ab, current->comm);
if (mm) {
down_read(&mm->mmap_sem);
hb2 = hash_futex(&key2);
retry_private:
+ hb_waiters_inc(hb2);
double_lock_hb(hb1, hb2);
if (likely(cmpval != NULL)) {
if (unlikely(ret)) {
double_unlock_hb(hb1, hb2);
+ hb_waiters_dec(hb2);
ret = get_user(curval, uaddr1);
if (ret)
break;
case -EFAULT:
double_unlock_hb(hb1, hb2);
+ hb_waiters_dec(hb2);
put_futex_key(&key2);
put_futex_key(&key1);
ret = fault_in_user_writeable(uaddr2);
case -EAGAIN:
/* The owner was exiting, try again. */
double_unlock_hb(hb1, hb2);
+ hb_waiters_dec(hb2);
put_futex_key(&key2);
put_futex_key(&key1);
cond_resched();
out_unlock:
double_unlock_hb(hb1, hb2);
+ hb_waiters_dec(hb2);
/*
* drop_futex_key_refs() must be called outside the spinlocks. During
static const struct pipe_buf_operations relay_pipe_buf_ops = {
.can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = relay_pipe_buf_release,
.steal = generic_pipe_buf_steal,
subbuf_pages = rbuf->chan->alloc_size >> PAGE_SHIFT;
pidx = (read_start / PAGE_SIZE) % subbuf_pages;
poff = read_start & ~PAGE_MASK;
- nr_pages = min_t(unsigned int, subbuf_pages, pipe->buffers);
+ nr_pages = min_t(unsigned int, subbuf_pages, spd.nr_pages_max);
for (total_len = 0; spd.nr_pages < nr_pages; spd.nr_pages++) {
unsigned int this_len, this_end, private;
struct pt_regs *regs = task_pt_regs(task);
sd->nr = syscall_get_nr(task, regs);
- sd->arch = syscall_get_arch(task, regs);
+ sd->arch = syscall_get_arch();
/* Unroll syscall_get_args to help gcc on arm. */
syscall_get_arguments(task, regs, 0, 1, (unsigned long *) &sd->args[0]);
info.si_code = SYS_SECCOMP;
info.si_call_addr = (void __user *)KSTK_EIP(current);
info.si_errno = reason;
- info.si_arch = syscall_get_arch(current, task_pt_regs(current));
+ info.si_arch = syscall_get_arch();
info.si_syscall = syscall;
force_sig_info(SIGSYS, &info, current);
}
#ifdef CONFIG_TRACER_SNAPSHOT
"\t\t snapshot\n"
#endif
+ "\t\t dump\n"
+ "\t\t cpudump\n"
"\t example: echo do_fault:traceoff > set_ftrace_filter\n"
"\t echo do_trap:traceoff:3 > set_ftrace_filter\n"
"\t The first one will disable tracing every time do_fault is hit\n"
static const struct pipe_buf_operations tracing_pipe_buf_ops = {
.can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = generic_pipe_buf_release,
.steal = generic_pipe_buf_steal,
trace_access_lock(iter->cpu_file);
/* Fill as many pages as possible. */
- for (i = 0, rem = len; i < pipe->buffers && rem; i++) {
+ for (i = 0, rem = len; i < spd.nr_pages_max && rem; i++) {
spd.pages[i] = alloc_page(GFP_KERNEL);
if (!spd.pages[i])
break;
/* Pipe buffer operations for a buffer. */
static const struct pipe_buf_operations buffer_pipe_buf_ops = {
.can_merge = 0,
- .map = generic_pipe_buf_map,
- .unmap = generic_pipe_buf_unmap,
.confirm = generic_pipe_buf_confirm,
.release = buffer_pipe_buf_release,
.steal = generic_pipe_buf_steal,
trace_access_lock(iter->cpu_file);
entries = ring_buffer_entries_cpu(iter->trace_buffer->buffer, iter->cpu_file);
- for (i = 0; i < pipe->buffers && len && entries; i++, len -= PAGE_SIZE) {
+ for (i = 0; i < spd.nr_pages_max && len && entries; i++, len -= PAGE_SIZE) {
struct page *page;
int r;
{
struct ftrace_event_file *file = data;
+ WARN_ON(!(call->flags & TRACE_EVENT_FL_TRACEPOINT));
switch (type) {
case TRACE_REG_REGISTER:
- return tracepoint_probe_register(call->name,
+ return tracepoint_probe_register(call->tp,
call->class->probe,
file);
case TRACE_REG_UNREGISTER:
- tracepoint_probe_unregister(call->name,
+ tracepoint_probe_unregister(call->tp,
call->class->probe,
file);
return 0;
#ifdef CONFIG_PERF_EVENTS
case TRACE_REG_PERF_REGISTER:
- return tracepoint_probe_register(call->name,
+ return tracepoint_probe_register(call->tp,
call->class->perf_probe,
call);
case TRACE_REG_PERF_UNREGISTER:
- tracepoint_probe_unregister(call->name,
+ tracepoint_probe_unregister(call->tp,
call->class->perf_probe,
call);
return 0;
if (ret) {
tracing_stop_cmdline_record();
pr_info("event trace: Could not enable event "
- "%s\n", call->name);
+ "%s\n", ftrace_event_name(call));
break;
}
set_bit(FTRACE_EVENT_FL_ENABLED_BIT, &file->flags);
{
struct ftrace_event_file *file;
struct ftrace_event_call *call;
+ const char *name;
int ret = -EINVAL;
list_for_each_entry(file, &tr->events, list) {
call = file->event_call;
+ name = ftrace_event_name(call);
- if (!call->name || !call->class || !call->class->reg)
+ if (!name || !call->class || !call->class->reg)
continue;
if (call->flags & TRACE_EVENT_FL_IGNORE_ENABLE)
continue;
if (match &&
- strcmp(match, call->name) != 0 &&
+ strcmp(match, name) != 0 &&
strcmp(match, call->class->system) != 0)
continue;
if (sub && strcmp(sub, call->class->system) != 0)
continue;
- if (event && strcmp(event, call->name) != 0)
+ if (event && strcmp(event, name) != 0)
continue;
ftrace_event_enable_disable(file, set);
if (strcmp(call->class->system, TRACE_SYSTEM) != 0)
seq_printf(m, "%s:", call->class->system);
- seq_printf(m, "%s\n", call->name);
+ seq_printf(m, "%s\n", ftrace_event_name(call));
return 0;
}
mutex_lock(&event_mutex);
list_for_each_entry(file, &tr->events, list) {
call = file->event_call;
- if (!call->name || !call->class || !call->class->reg)
+ if (!ftrace_event_name(call) || !call->class || !call->class->reg)
continue;
if (system && strcmp(call->class->system, system->name) != 0)
switch ((unsigned long)v) {
case FORMAT_HEADER:
- seq_printf(m, "name: %s\n", call->name);
+ seq_printf(m, "name: %s\n", ftrace_event_name(call));
seq_printf(m, "ID: %d\n", call->event.type);
seq_printf(m, "format:\n");
return 0;
struct trace_array *tr = file->tr;
struct list_head *head;
struct dentry *d_events;
+ const char *name;
int ret;
/*
} else
d_events = parent;
- file->dir = debugfs_create_dir(call->name, d_events);
+ name = ftrace_event_name(call);
+ file->dir = debugfs_create_dir(name, d_events);
if (!file->dir) {
pr_warning("Could not create debugfs '%s' directory\n",
- call->name);
+ name);
return -1;
}
ret = call->class->define_fields(call);
if (ret < 0) {
pr_warning("Could not initialize trace point"
- " events/%s\n", call->name);
+ " events/%s\n", name);
return -1;
}
}
static int event_init(struct ftrace_event_call *call)
{
int ret = 0;
+ const char *name;
- if (WARN_ON(!call->name))
+ name = ftrace_event_name(call);
+ if (WARN_ON(!name))
return -EINVAL;
if (call->class->raw_init) {
ret = call->class->raw_init(call);
if (ret < 0 && ret != -ENOSYS)
pr_warn("Could not initialize trace events/%s\n",
- call->name);
+ name);
}
return ret;
ret = __trace_add_new_event(call, tr);
if (ret < 0)
pr_warning("Could not create directory for event %s\n",
- call->name);
+ ftrace_event_name(call));
}
}
{
struct ftrace_event_file *file;
struct ftrace_event_call *call;
+ const char *name;
list_for_each_entry(file, &tr->events, list) {
call = file->event_call;
+ name = ftrace_event_name(call);
- if (!call->name || !call->class || !call->class->reg)
+ if (!name || !call->class || !call->class->reg)
continue;
if (call->flags & TRACE_EVENT_FL_IGNORE_ENABLE)
continue;
- if (strcmp(event, call->name) == 0 &&
+ if (strcmp(event, name) == 0 &&
strcmp(system, call->class->system) == 0)
return file;
}
seq_printf(m, "%s:%s:%s",
data->enable ? ENABLE_EVENT_STR : DISABLE_EVENT_STR,
data->file->event_call->class->system,
- data->file->event_call->name);
+ ftrace_event_name(data->file->event_call));
if (data->count == -1)
seq_printf(m, ":unlimited\n");
ret = event_create_dir(tr->event_dir, file);
if (ret < 0)
pr_warning("Could not create directory for event %s\n",
- file->event_call->name);
+ ftrace_event_name(file->event_call));
}
}
ret = __trace_early_add_new_event(call, tr);
if (ret < 0)
pr_warning("Could not create early event %s\n",
- call->name);
+ ftrace_event_name(call));
}
}
continue;
#endif
- pr_info("Testing event %s: ", call->name);
+ pr_info("Testing event %s: ", ftrace_event_name(call));
/*
* If an event is already enabled, someone is using
seq_printf(m, "%s:%s:%s",
enable_data->enable ? ENABLE_EVENT_STR : DISABLE_EVENT_STR,
enable_data->file->event_call->class->system,
- enable_data->file->event_call->name);
+ ftrace_event_name(enable_data->file->event_call));
if (data->count == -1)
seq_puts(m, ":unlimited");
}; \
\
struct ftrace_event_call __used event_##call = { \
- .name = #call, \
- .event.type = etype, \
.class = &event_class_ftrace_##call, \
+ { \
+ .name = #call, \
+ }, \
+ .event.type = etype, \
.print_fmt = print, \
.flags = TRACE_EVENT_FL_IGNORE_ENABLE | TRACE_EVENT_FL_USE_CALL_FILTER, \
}; \
struct trace_kprobe *tk;
list_for_each_entry(tk, &probe_list, list)
- if (strcmp(tk->tp.call.name, event) == 0 &&
+ if (strcmp(ftrace_event_name(&tk->tp.call), event) == 0 &&
strcmp(tk->tp.call.class->system, group) == 0)
return tk;
return NULL;
mutex_lock(&probe_lock);
/* Delete old (same name) event if exist */
- old_tk = find_trace_kprobe(tk->tp.call.name, tk->tp.call.class->system);
+ old_tk = find_trace_kprobe(ftrace_event_name(&tk->tp.call),
+ tk->tp.call.class->system);
if (old_tk) {
ret = unregister_trace_kprobe(old_tk);
if (ret < 0)
if (ret)
pr_warning("Failed to re-register probe %s on"
"%s: %d\n",
- tk->tp.call.name, mod->name, ret);
+ ftrace_event_name(&tk->tp.call),
+ mod->name, ret);
}
}
mutex_unlock(&probe_lock);
int i;
seq_printf(m, "%c", trace_kprobe_is_return(tk) ? 'r' : 'p');
- seq_printf(m, ":%s/%s", tk->tp.call.class->system, tk->tp.call.name);
+ seq_printf(m, ":%s/%s", tk->tp.call.class->system,
+ ftrace_event_name(&tk->tp.call));
if (!tk->symbol)
seq_printf(m, " 0x%p", tk->rp.kp.addr);
{
struct trace_kprobe *tk = v;
- seq_printf(m, " %-44s %15lu %15lu\n", tk->tp.call.name, tk->nhit,
+ seq_printf(m, " %-44s %15lu %15lu\n",
+ ftrace_event_name(&tk->tp.call), tk->nhit,
tk->rp.kp.nmissed);
return 0;
field = (struct kprobe_trace_entry_head *)iter->ent;
tp = container_of(event, struct trace_probe, call.event);
- if (!trace_seq_printf(s, "%s: (", tp->call.name))
+ if (!trace_seq_printf(s, "%s: (", ftrace_event_name(&tp->call)))
goto partial;
if (!seq_print_ip_sym(s, field->ip, flags | TRACE_ITER_SYM_OFFSET))
field = (struct kretprobe_trace_entry_head *)iter->ent;
tp = container_of(event, struct trace_probe, call.event);
- if (!trace_seq_printf(s, "%s: (", tp->call.name))
+ if (!trace_seq_printf(s, "%s: (", ftrace_event_name(&tp->call)))
goto partial;
if (!seq_print_ip_sym(s, field->ret_ip, flags | TRACE_ITER_SYM_OFFSET))
call->data = tk;
ret = trace_add_event_call(call);
if (ret) {
- pr_info("Failed to register kprobe event: %s\n", call->name);
+ pr_info("Failed to register kprobe event: %s\n",
+ ftrace_event_name(call));
kfree(call->print_fmt);
unregister_ftrace_event(&call->event);
}
}
trace_seq_init(p);
- ret = trace_seq_printf(s, "%s: ", event->name);
+ ret = trace_seq_printf(s, "%s: ", ftrace_event_name(event));
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
struct trace_uprobe *tu;
list_for_each_entry(tu, &uprobe_list, list)
- if (strcmp(tu->tp.call.name, event) == 0 &&
+ if (strcmp(ftrace_event_name(&tu->tp.call), event) == 0 &&
strcmp(tu->tp.call.class->system, group) == 0)
return tu;
mutex_lock(&uprobe_lock);
/* register as an event */
- old_tu = find_probe_event(tu->tp.call.name, tu->tp.call.class->system);
+ old_tu = find_probe_event(ftrace_event_name(&tu->tp.call),
+ tu->tp.call.class->system);
if (old_tu) {
/* delete old event */
ret = unregister_trace_uprobe(old_tu);
char c = is_ret_probe(tu) ? 'r' : 'p';
int i;
- seq_printf(m, "%c:%s/%s", c, tu->tp.call.class->system, tu->tp.call.name);
+ seq_printf(m, "%c:%s/%s", c, tu->tp.call.class->system,
+ ftrace_event_name(&tu->tp.call));
seq_printf(m, " %s:0x%p", tu->filename, (void *)tu->offset);
for (i = 0; i < tu->tp.nr_args; i++)
{
struct trace_uprobe *tu = v;
- seq_printf(m, " %s %-44s %15lu\n", tu->filename, tu->tp.call.name, tu->nhit);
+ seq_printf(m, " %s %-44s %15lu\n", tu->filename,
+ ftrace_event_name(&tu->tp.call), tu->nhit);
return 0;
}
tu = container_of(event, struct trace_uprobe, tp.call.event);
if (is_ret_probe(tu)) {
- if (!trace_seq_printf(s, "%s: (0x%lx <- 0x%lx)", tu->tp.call.name,
+ if (!trace_seq_printf(s, "%s: (0x%lx <- 0x%lx)",
+ ftrace_event_name(&tu->tp.call),
entry->vaddr[1], entry->vaddr[0]))
goto partial;
data = DATAOF_TRACE_ENTRY(entry, true);
} else {
- if (!trace_seq_printf(s, "%s: (0x%lx)", tu->tp.call.name,
+ if (!trace_seq_printf(s, "%s: (0x%lx)",
+ ftrace_event_name(&tu->tp.call),
entry->vaddr[0]))
goto partial;
data = DATAOF_TRACE_ENTRY(entry, false);
ret = trace_add_event_call(call);
if (ret) {
- pr_info("Failed to register uprobe event: %s\n", call->name);
+ pr_info("Failed to register uprobe event: %s\n",
+ ftrace_event_name(call));
kfree(call->print_fmt);
unregister_ftrace_event(&call->event);
}
/*
- * Copyright (C) 2008 Mathieu Desnoyers
+ * Copyright (C) 2008-2014 Mathieu Desnoyers
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/* Set to 1 to enable tracepoint debug output */
static const int tracepoint_debug;
+#ifdef CONFIG_MODULES
/*
- * Tracepoints mutex protects the builtin and module tracepoints and the hash
- * table, as well as the local module list.
+ * Tracepoint module list mutex protects the local module list.
*/
-static DEFINE_MUTEX(tracepoints_mutex);
+static DEFINE_MUTEX(tracepoint_module_list_mutex);
-#ifdef CONFIG_MODULES
-/* Local list of struct module */
+/* Local list of struct tp_module */
static LIST_HEAD(tracepoint_module_list);
#endif /* CONFIG_MODULES */
/*
- * Tracepoint hash table, containing the active tracepoints.
- * Protected by tracepoints_mutex.
+ * tracepoints_mutex protects the builtin and module tracepoints.
+ * tracepoints_mutex nests inside tracepoint_module_list_mutex.
*/
-#define TRACEPOINT_HASH_BITS 6
-#define TRACEPOINT_TABLE_SIZE (1 << TRACEPOINT_HASH_BITS)
-static struct hlist_head tracepoint_table[TRACEPOINT_TABLE_SIZE];
+static DEFINE_MUTEX(tracepoints_mutex);
/*
* Note about RCU :
* It is used to delay the free of multiple probes array until a quiescent
* state is reached.
- * Tracepoint entries modifications are protected by the tracepoints_mutex.
*/
-struct tracepoint_entry {
- struct hlist_node hlist;
- struct tracepoint_func *funcs;
- int refcount; /* Number of times armed. 0 if disarmed. */
- int enabled; /* Tracepoint enabled */
- char name[0];
-};
-
struct tp_probes {
struct rcu_head rcu;
struct tracepoint_func probes[0];
}
}
-static void debug_print_probes(struct tracepoint_entry *entry)
+static void debug_print_probes(struct tracepoint_func *funcs)
{
int i;
- if (!tracepoint_debug || !entry->funcs)
+ if (!tracepoint_debug || !funcs)
return;
- for (i = 0; entry->funcs[i].func; i++)
- printk(KERN_DEBUG "Probe %d : %p\n", i, entry->funcs[i].func);
+ for (i = 0; funcs[i].func; i++)
+ printk(KERN_DEBUG "Probe %d : %p\n", i, funcs[i].func);
}
-static struct tracepoint_func *
-tracepoint_entry_add_probe(struct tracepoint_entry *entry,
- void *probe, void *data)
+static struct tracepoint_func *func_add(struct tracepoint_func **funcs,
+ struct tracepoint_func *tp_func)
{
int nr_probes = 0;
struct tracepoint_func *old, *new;
- if (WARN_ON(!probe))
+ if (WARN_ON(!tp_func->func))
return ERR_PTR(-EINVAL);
- debug_print_probes(entry);
- old = entry->funcs;
+ debug_print_probes(*funcs);
+ old = *funcs;
if (old) {
/* (N -> N+1), (N != 0, 1) probes */
for (nr_probes = 0; old[nr_probes].func; nr_probes++)
- if (old[nr_probes].func == probe &&
- old[nr_probes].data == data)
+ if (old[nr_probes].func == tp_func->func &&
+ old[nr_probes].data == tp_func->data)
return ERR_PTR(-EEXIST);
}
/* + 2 : one for new probe, one for NULL func */
return ERR_PTR(-ENOMEM);
if (old)
memcpy(new, old, nr_probes * sizeof(struct tracepoint_func));
- new[nr_probes].func = probe;
- new[nr_probes].data = data;
+ new[nr_probes] = *tp_func;
new[nr_probes + 1].func = NULL;
- entry->refcount = nr_probes + 1;
- entry->funcs = new;
- debug_print_probes(entry);
+ *funcs = new;
+ debug_print_probes(*funcs);
return old;
}
-static void *
-tracepoint_entry_remove_probe(struct tracepoint_entry *entry,
- void *probe, void *data)
+static void *func_remove(struct tracepoint_func **funcs,
+ struct tracepoint_func *tp_func)
{
int nr_probes = 0, nr_del = 0, i;
struct tracepoint_func *old, *new;
- old = entry->funcs;
+ old = *funcs;
if (!old)
return ERR_PTR(-ENOENT);
- debug_print_probes(entry);
+ debug_print_probes(*funcs);
/* (N -> M), (N > 1, M >= 0) probes */
- if (probe) {
+ if (tp_func->func) {
for (nr_probes = 0; old[nr_probes].func; nr_probes++) {
- if (old[nr_probes].func == probe &&
- old[nr_probes].data == data)
+ if (old[nr_probes].func == tp_func->func &&
+ old[nr_probes].data == tp_func->data)
nr_del++;
}
}
*/
if (nr_probes - nr_del == 0) {
/* N -> 0, (N > 1) */
- entry->funcs = NULL;
- entry->refcount = 0;
- debug_print_probes(entry);
+ *funcs = NULL;
+ debug_print_probes(*funcs);
return old;
} else {
int j = 0;
if (new == NULL)
return ERR_PTR(-ENOMEM);
for (i = 0; old[i].func; i++)
- if (old[i].func != probe || old[i].data != data)
+ if (old[i].func != tp_func->func
+ || old[i].data != tp_func->data)
new[j++] = old[i];
new[nr_probes - nr_del].func = NULL;
- entry->refcount = nr_probes - nr_del;
- entry->funcs = new;
+ *funcs = new;
}
- debug_print_probes(entry);
+ debug_print_probes(*funcs);
return old;
}
/*
- * Get tracepoint if the tracepoint is present in the tracepoint hash table.
- * Must be called with tracepoints_mutex held.
- * Returns NULL if not present.
+ * Add the probe function to a tracepoint.
*/
-static struct tracepoint_entry *get_tracepoint(const char *name)
+static int tracepoint_add_func(struct tracepoint *tp,
+ struct tracepoint_func *func)
{
- struct hlist_head *head;
- struct tracepoint_entry *e;
- u32 hash = jhash(name, strlen(name), 0);
-
- head = &tracepoint_table[hash & (TRACEPOINT_TABLE_SIZE - 1)];
- hlist_for_each_entry(e, head, hlist) {
- if (!strcmp(name, e->name))
- return e;
- }
- return NULL;
-}
+ struct tracepoint_func *old, *tp_funcs;
-/*
- * Add the tracepoint to the tracepoint hash table. Must be called with
- * tracepoints_mutex held.
- */
-static struct tracepoint_entry *add_tracepoint(const char *name)
-{
- struct hlist_head *head;
- struct tracepoint_entry *e;
- size_t name_len = strlen(name) + 1;
- u32 hash = jhash(name, name_len-1, 0);
-
- head = &tracepoint_table[hash & (TRACEPOINT_TABLE_SIZE - 1)];
- hlist_for_each_entry(e, head, hlist) {
- if (!strcmp(name, e->name)) {
- printk(KERN_NOTICE
- "tracepoint %s busy\n", name);
- return ERR_PTR(-EEXIST); /* Already there */
- }
- }
- /*
- * Using kmalloc here to allocate a variable length element. Could
- * cause some memory fragmentation if overused.
- */
- e = kmalloc(sizeof(struct tracepoint_entry) + name_len, GFP_KERNEL);
- if (!e)
- return ERR_PTR(-ENOMEM);
- memcpy(&e->name[0], name, name_len);
- e->funcs = NULL;
- e->refcount = 0;
- e->enabled = 0;
- hlist_add_head(&e->hlist, head);
- return e;
-}
+ if (tp->regfunc && !static_key_enabled(&tp->key))
+ tp->regfunc();
-/*
- * Remove the tracepoint from the tracepoint hash table. Must be called with
- * mutex_lock held.
- */
-static inline void remove_tracepoint(struct tracepoint_entry *e)
-{
- hlist_del(&e->hlist);
- kfree(e);
-}
-
-/*
- * Sets the probe callback corresponding to one tracepoint.
- */
-static void set_tracepoint(struct tracepoint_entry **entry,
- struct tracepoint *elem, int active)
-{
- WARN_ON(strcmp((*entry)->name, elem->name) != 0);
-
- if (elem->regfunc && !static_key_enabled(&elem->key) && active)
- elem->regfunc();
- else if (elem->unregfunc && static_key_enabled(&elem->key) && !active)
- elem->unregfunc();
+ tp_funcs = rcu_dereference_protected(tp->funcs,
+ lockdep_is_held(&tracepoints_mutex));
+ old = func_add(&tp_funcs, func);
+ if (IS_ERR(old)) {
+ WARN_ON_ONCE(1);
+ return PTR_ERR(old);
+ }
+ release_probes(old);
/*
* rcu_assign_pointer has a smp_wmb() which makes sure that the new
* include/linux/tracepoints.h. A matching smp_read_barrier_depends()
* is used.
*/
- rcu_assign_pointer(elem->funcs, (*entry)->funcs);
- if (active && !static_key_enabled(&elem->key))
- static_key_slow_inc(&elem->key);
- else if (!active && static_key_enabled(&elem->key))
- static_key_slow_dec(&elem->key);
+ rcu_assign_pointer(tp->funcs, tp_funcs);
+ if (!static_key_enabled(&tp->key))
+ static_key_slow_inc(&tp->key);
+ return 0;
}
/*
- * Disable a tracepoint and its probe callback.
+ * Remove a probe function from a tracepoint.
* Note: only waiting an RCU period after setting elem->call to the empty
* function insures that the original callback is not used anymore. This insured
* by preempt_disable around the call site.
*/
-static void disable_tracepoint(struct tracepoint *elem)
+static int tracepoint_remove_func(struct tracepoint *tp,
+ struct tracepoint_func *func)
{
- if (elem->unregfunc && static_key_enabled(&elem->key))
- elem->unregfunc();
-
- if (static_key_enabled(&elem->key))
- static_key_slow_dec(&elem->key);
- rcu_assign_pointer(elem->funcs, NULL);
-}
+ struct tracepoint_func *old, *tp_funcs;
-/**
- * tracepoint_update_probe_range - Update a probe range
- * @begin: beginning of the range
- * @end: end of the range
- *
- * Updates the probe callback corresponding to a range of tracepoints.
- * Called with tracepoints_mutex held.
- */
-static void tracepoint_update_probe_range(struct tracepoint * const *begin,
- struct tracepoint * const *end)
-{
- struct tracepoint * const *iter;
- struct tracepoint_entry *mark_entry;
-
- if (!begin)
- return;
-
- for (iter = begin; iter < end; iter++) {
- mark_entry = get_tracepoint((*iter)->name);
- if (mark_entry) {
- set_tracepoint(&mark_entry, *iter,
- !!mark_entry->refcount);
- mark_entry->enabled = !!mark_entry->refcount;
- } else {
- disable_tracepoint(*iter);
- }
+ tp_funcs = rcu_dereference_protected(tp->funcs,
+ lockdep_is_held(&tracepoints_mutex));
+ old = func_remove(&tp_funcs, func);
+ if (IS_ERR(old)) {
+ WARN_ON_ONCE(1);
+ return PTR_ERR(old);
}
-}
-
-#ifdef CONFIG_MODULES
-void module_update_tracepoints(void)
-{
- struct tp_module *tp_mod;
-
- list_for_each_entry(tp_mod, &tracepoint_module_list, list)
- tracepoint_update_probe_range(tp_mod->tracepoints_ptrs,
- tp_mod->tracepoints_ptrs + tp_mod->num_tracepoints);
-}
-#else /* CONFIG_MODULES */
-void module_update_tracepoints(void)
-{
-}
-#endif /* CONFIG_MODULES */
+ release_probes(old);
+ if (!tp_funcs) {
+ /* Removed last function */
+ if (tp->unregfunc && static_key_enabled(&tp->key))
+ tp->unregfunc();
-/*
- * Update probes, removing the faulty probes.
- * Called with tracepoints_mutex held.
- */
-static void tracepoint_update_probes(void)
-{
- /* Core kernel tracepoints */
- tracepoint_update_probe_range(__start___tracepoints_ptrs,
- __stop___tracepoints_ptrs);
- /* tracepoints in modules. */
- module_update_tracepoints();
-}
-
-static struct tracepoint_func *
-tracepoint_add_probe(const char *name, void *probe, void *data)
-{
- struct tracepoint_entry *entry;
- struct tracepoint_func *old;
-
- entry = get_tracepoint(name);
- if (!entry) {
- entry = add_tracepoint(name);
- if (IS_ERR(entry))
- return (struct tracepoint_func *)entry;
+ if (static_key_enabled(&tp->key))
+ static_key_slow_dec(&tp->key);
}
- old = tracepoint_entry_add_probe(entry, probe, data);
- if (IS_ERR(old) && !entry->refcount)
- remove_tracepoint(entry);
- return old;
+ rcu_assign_pointer(tp->funcs, tp_funcs);
+ return 0;
}
/**
* tracepoint_probe_register - Connect a probe to a tracepoint
- * @name: tracepoint name
+ * @tp: tracepoint
* @probe: probe handler
- * @data: probe private data
- *
- * Returns:
- * - 0 if the probe was successfully registered, and tracepoint
- * callsites are currently loaded for that probe,
- * - -ENODEV if the probe was successfully registered, but no tracepoint
- * callsite is currently loaded for that probe,
- * - other negative error value on error.
- *
- * When tracepoint_probe_register() returns either 0 or -ENODEV,
- * parameters @name, @probe, and @data may be used by the tracepoint
- * infrastructure until the probe is unregistered.
*
- * The probe address must at least be aligned on the architecture pointer size.
+ * Returns 0 if ok, error value on error.
+ * Note: if @tp is within a module, the caller is responsible for
+ * unregistering the probe before the module is gone. This can be
+ * performed either with a tracepoint module going notifier, or from
+ * within module exit functions.
*/
-int tracepoint_probe_register(const char *name, void *probe, void *data)
+int tracepoint_probe_register(struct tracepoint *tp, void *probe, void *data)
{
- struct tracepoint_func *old;
- struct tracepoint_entry *entry;
- int ret = 0;
+ struct tracepoint_func tp_func;
+ int ret;
mutex_lock(&tracepoints_mutex);
- old = tracepoint_add_probe(name, probe, data);
- if (IS_ERR(old)) {
- mutex_unlock(&tracepoints_mutex);
- return PTR_ERR(old);
- }
- tracepoint_update_probes(); /* may update entry */
- entry = get_tracepoint(name);
- /* Make sure the entry was enabled */
- if (!entry || !entry->enabled)
- ret = -ENODEV;
+ tp_func.func = probe;
+ tp_func.data = data;
+ ret = tracepoint_add_func(tp, &tp_func);
mutex_unlock(&tracepoints_mutex);
- release_probes(old);
return ret;
}
EXPORT_SYMBOL_GPL(tracepoint_probe_register);
-static struct tracepoint_func *
-tracepoint_remove_probe(const char *name, void *probe, void *data)
-{
- struct tracepoint_entry *entry;
- struct tracepoint_func *old;
-
- entry = get_tracepoint(name);
- if (!entry)
- return ERR_PTR(-ENOENT);
- old = tracepoint_entry_remove_probe(entry, probe, data);
- if (IS_ERR(old))
- return old;
- if (!entry->refcount)
- remove_tracepoint(entry);
- return old;
-}
-
/**
* tracepoint_probe_unregister - Disconnect a probe from a tracepoint
- * @name: tracepoint name
+ * @tp: tracepoint
* @probe: probe function pointer
- * @data: probe private data
*
- * We do not need to call a synchronize_sched to make sure the probes have
- * finished running before doing a module unload, because the module unload
- * itself uses stop_machine(), which insures that every preempt disabled section
- * have finished.
+ * Returns 0 if ok, error value on error.
*/
-int tracepoint_probe_unregister(const char *name, void *probe, void *data)
+int tracepoint_probe_unregister(struct tracepoint *tp, void *probe, void *data)
{
- struct tracepoint_func *old;
+ struct tracepoint_func tp_func;
+ int ret;
mutex_lock(&tracepoints_mutex);
- old = tracepoint_remove_probe(name, probe, data);
- if (IS_ERR(old)) {
- mutex_unlock(&tracepoints_mutex);
- return PTR_ERR(old);
- }
- tracepoint_update_probes(); /* may update entry */
+ tp_func.func = probe;
+ tp_func.data = data;
+ ret = tracepoint_remove_func(tp, &tp_func);
mutex_unlock(&tracepoints_mutex);
- release_probes(old);
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(tracepoint_probe_unregister);
-
#ifdef CONFIG_MODULES
bool trace_module_has_bad_taint(struct module *mod)
{
(1 << TAINT_UNSIGNED_MODULE));
}
+static BLOCKING_NOTIFIER_HEAD(tracepoint_notify_list);
+
+/**
+ * register_tracepoint_notifier - register tracepoint coming/going notifier
+ * @nb: notifier block
+ *
+ * Notifiers registered with this function are called on module
+ * coming/going with the tracepoint_module_list_mutex held.
+ * The notifier block callback should expect a "struct tp_module" data
+ * pointer.
+ */
+int register_tracepoint_module_notifier(struct notifier_block *nb)
+{
+ struct tp_module *tp_mod;
+ int ret;
+
+ mutex_lock(&tracepoint_module_list_mutex);
+ ret = blocking_notifier_chain_register(&tracepoint_notify_list, nb);
+ if (ret)
+ goto end;
+ list_for_each_entry(tp_mod, &tracepoint_module_list, list)
+ (void) nb->notifier_call(nb, MODULE_STATE_COMING, tp_mod);
+end:
+ mutex_unlock(&tracepoint_module_list_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(register_tracepoint_module_notifier);
+
+/**
+ * unregister_tracepoint_notifier - unregister tracepoint coming/going notifier
+ * @nb: notifier block
+ *
+ * The notifier block callback should expect a "struct tp_module" data
+ * pointer.
+ */
+int unregister_tracepoint_module_notifier(struct notifier_block *nb)
+{
+ struct tp_module *tp_mod;
+ int ret;
+
+ mutex_lock(&tracepoint_module_list_mutex);
+ ret = blocking_notifier_chain_unregister(&tracepoint_notify_list, nb);
+ if (ret)
+ goto end;
+ list_for_each_entry(tp_mod, &tracepoint_module_list, list)
+ (void) nb->notifier_call(nb, MODULE_STATE_GOING, tp_mod);
+end:
+ mutex_unlock(&tracepoint_module_list_mutex);
+ return ret;
+
+}
+EXPORT_SYMBOL_GPL(unregister_tracepoint_module_notifier);
+
+/*
+ * Ensure the tracer unregistered the module's probes before the module
+ * teardown is performed. Prevents leaks of probe and data pointers.
+ */
+static void tp_module_going_check_quiescent(struct tracepoint * const *begin,
+ struct tracepoint * const *end)
+{
+ struct tracepoint * const *iter;
+
+ if (!begin)
+ return;
+ for (iter = begin; iter < end; iter++)
+ WARN_ON_ONCE((*iter)->funcs);
+}
+
static int tracepoint_module_coming(struct module *mod)
{
struct tp_module *tp_mod;
*/
if (trace_module_has_bad_taint(mod))
return 0;
- mutex_lock(&tracepoints_mutex);
+ mutex_lock(&tracepoint_module_list_mutex);
tp_mod = kmalloc(sizeof(struct tp_module), GFP_KERNEL);
if (!tp_mod) {
ret = -ENOMEM;
goto end;
}
- tp_mod->num_tracepoints = mod->num_tracepoints;
- tp_mod->tracepoints_ptrs = mod->tracepoints_ptrs;
+ tp_mod->mod = mod;
list_add_tail(&tp_mod->list, &tracepoint_module_list);
- tracepoint_update_probe_range(mod->tracepoints_ptrs,
- mod->tracepoints_ptrs + mod->num_tracepoints);
+ blocking_notifier_call_chain(&tracepoint_notify_list,
+ MODULE_STATE_COMING, tp_mod);
end:
- mutex_unlock(&tracepoints_mutex);
+ mutex_unlock(&tracepoint_module_list_mutex);
return ret;
}
-static int tracepoint_module_going(struct module *mod)
+static void tracepoint_module_going(struct module *mod)
{
- struct tp_module *pos;
+ struct tp_module *tp_mod;
if (!mod->num_tracepoints)
- return 0;
+ return;
- mutex_lock(&tracepoints_mutex);
- tracepoint_update_probe_range(mod->tracepoints_ptrs,
- mod->tracepoints_ptrs + mod->num_tracepoints);
- list_for_each_entry(pos, &tracepoint_module_list, list) {
- if (pos->tracepoints_ptrs == mod->tracepoints_ptrs) {
- list_del(&pos->list);
- kfree(pos);
+ mutex_lock(&tracepoint_module_list_mutex);
+ list_for_each_entry(tp_mod, &tracepoint_module_list, list) {
+ if (tp_mod->mod == mod) {
+ blocking_notifier_call_chain(&tracepoint_notify_list,
+ MODULE_STATE_GOING, tp_mod);
+ list_del(&tp_mod->list);
+ kfree(tp_mod);
+ /*
+ * Called the going notifier before checking for
+ * quiescence.
+ */
+ tp_module_going_check_quiescent(mod->tracepoints_ptrs,
+ mod->tracepoints_ptrs + mod->num_tracepoints);
break;
}
}
* flag on "going", in case a module taints the kernel only after being
* loaded.
*/
- mutex_unlock(&tracepoints_mutex);
- return 0;
+ mutex_unlock(&tracepoint_module_list_mutex);
}
-int tracepoint_module_notify(struct notifier_block *self,
- unsigned long val, void *data)
+static int tracepoint_module_notify(struct notifier_block *self,
+ unsigned long val, void *data)
{
struct module *mod = data;
int ret = 0;
case MODULE_STATE_LIVE:
break;
case MODULE_STATE_GOING:
- ret = tracepoint_module_going(mod);
+ tracepoint_module_going(mod);
+ break;
+ case MODULE_STATE_UNFORMED:
break;
}
return ret;
}
-struct notifier_block tracepoint_module_nb = {
+static struct notifier_block tracepoint_module_nb = {
.notifier_call = tracepoint_module_notify,
.priority = 0,
};
-static int init_tracepoints(void)
+static __init int init_tracepoints(void)
{
- return register_module_notifier(&tracepoint_module_nb);
+ int ret;
+
+ ret = register_module_notifier(&tracepoint_module_nb);
+ if (ret)
+ pr_warning("Failed to register tracepoint module enter notifier\n");
+
+ return ret;
}
__initcall(init_tracepoints);
#endif /* CONFIG_MODULES */
+static void for_each_tracepoint_range(struct tracepoint * const *begin,
+ struct tracepoint * const *end,
+ void (*fct)(struct tracepoint *tp, void *priv),
+ void *priv)
+{
+ struct tracepoint * const *iter;
+
+ if (!begin)
+ return;
+ for (iter = begin; iter < end; iter++)
+ fct(*iter, priv);
+}
+
+/**
+ * for_each_kernel_tracepoint - iteration on all kernel tracepoints
+ * @fct: callback
+ * @priv: private data
+ */
+void for_each_kernel_tracepoint(void (*fct)(struct tracepoint *tp, void *priv),
+ void *priv)
+{
+ for_each_tracepoint_range(__start___tracepoints_ptrs,
+ __stop___tracepoints_ptrs, fct, priv);
+}
+EXPORT_SYMBOL_GPL(for_each_kernel_tracepoint);
+
#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
depends on AUDIT && !AUDIT_ARCH
default y
+config AUDIT_ARCH_COMPAT_GENERIC
+ bool
+ default n
+
+config AUDIT_COMPAT_GENERIC
+ bool
+ depends on AUDIT_GENERIC && AUDIT_ARCH_COMPAT_GENERIC && COMPAT
+ default y
+
config RANDOM32_SELFTEST
bool "PRNG perform self test on init"
default n
of the BUG call as well as the EIP and oops trace. This aids
debugging but costs about 70-100K of memory.
-config DEBUG_WRITECOUNT
- bool "Debug filesystem writers count"
- depends on DEBUG_KERNEL
- help
- Enable this to catch wrong use of the writers count in struct
- vfsmount. This will increase the size of each file struct by
- 32 bits.
-
- If unsure, say N.
-
config DEBUG_LIST
bool "Debug linked list manipulation"
depends on DEBUG_KERNEL
obj-$(CONFIG_TEXTSEARCH_FSM) += ts_fsm.o
obj-$(CONFIG_SMP) += percpu_counter.o
obj-$(CONFIG_AUDIT_GENERIC) += audit.o
+obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o
obj-$(CONFIG_SWIOTLB) += swiotlb.o
obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o
int audit_classify_arch(int arch)
{
- return 0;
+ if (audit_is_compat(arch))
+ return 1;
+ else
+ return 0;
}
int audit_classify_syscall(int abi, unsigned syscall)
{
+ if (audit_is_compat(abi))
+ return audit_classify_compat_syscall(abi, syscall);
+
switch(syscall) {
#ifdef __NR_open
case __NR_open:
static int __init audit_classes_init(void)
{
+#ifdef CONFIG_AUDIT_COMPAT_GENERIC
+ audit_register_class(AUDIT_CLASS_WRITE_32, compat_write_class);
+ audit_register_class(AUDIT_CLASS_READ_32, compat_read_class);
+ audit_register_class(AUDIT_CLASS_DIR_WRITE_32, compat_dir_class);
+ audit_register_class(AUDIT_CLASS_CHATTR_32, compat_chattr_class);
+ audit_register_class(AUDIT_CLASS_SIGNAL_32, compat_signal_class);
+#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
--- /dev/null
+#include <linux/init.h>
+#include <linux/types.h>
+#include <asm/unistd32.h>
+
+unsigned compat_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned compat_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+unsigned compat_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned compat_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned compat_signal_class[] = {
+#include <asm-generic/audit_signal.h>
+~0U
+};
+
+int audit_classify_compat_syscall(int abi, unsigned syscall)
+{
+ switch (syscall) {
+#ifdef __NR_open
+ case __NR_open:
+ return 2;
+#endif
+#ifdef __NR_openat
+ case __NR_openat:
+ return 3;
+#endif
+#ifdef __NR_socketcall
+ case __NR_socketcall:
+ return 4;
+#endif
+ case __NR_execve:
+ return 5;
+ default:
+ return 1;
+ }
+}
struct percpu_counter *fbc;
compute_batch_value();
- if (action != CPU_DEAD)
+ if (action != CPU_DEAD && action != CPU_DEAD_FROZEN)
return NOTIFY_OK;
cpu = (unsigned long)hcpu;
util.o mmzone.o vmstat.o backing-dev.o \
mm_init.o mmu_context.o percpu.o slab_common.o \
compaction.o balloon_compaction.o vmacache.o \
- interval_tree.o list_lru.o workingset.o $(mmu-y)
+ interval_tree.o list_lru.o workingset.o \
+ iov_iter.o $(mmu-y)
obj-y += init-mm.o
* ->mmap_sem
* ->lock_page (access_process_vm)
*
- * ->i_mutex (generic_file_buffered_write)
+ * ->i_mutex (generic_perform_write)
* ->mmap_sem (fault_in_pages_readable->do_page_fault)
*
* bdi->wb.list_lock
* do_generic_file_read - generic file read routine
* @filp: the file to read
* @ppos: current file position
- * @desc: read_descriptor
+ * @iter: data destination
+ * @written: already copied
*
* This is a generic file read routine, and uses the
* mapping->a_ops->readpage() function for the actual low-level stuff.
* This is really ugly. But the goto's actually try to clarify some
* of the logic when it comes to error handling etc.
*/
-static void do_generic_file_read(struct file *filp, loff_t *ppos,
- read_descriptor_t *desc)
+static ssize_t do_generic_file_read(struct file *filp, loff_t *ppos,
+ struct iov_iter *iter, ssize_t written)
{
struct address_space *mapping = filp->f_mapping;
struct inode *inode = mapping->host;
pgoff_t prev_index;
unsigned long offset; /* offset into pagecache page */
unsigned int prev_offset;
- int error;
+ int error = 0;
index = *ppos >> PAGE_CACHE_SHIFT;
prev_index = ra->prev_pos >> PAGE_CACHE_SHIFT;
prev_offset = ra->prev_pos & (PAGE_CACHE_SIZE-1);
- last_index = (*ppos + desc->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT;
+ last_index = (*ppos + iter->count + PAGE_CACHE_SIZE-1) >> PAGE_CACHE_SHIFT;
offset = *ppos & ~PAGE_CACHE_MASK;
for (;;) {
if (!page->mapping)
goto page_not_up_to_date_locked;
if (!mapping->a_ops->is_partially_uptodate(page,
- desc, offset))
+ offset, iter->count))
goto page_not_up_to_date_locked;
unlock_page(page);
}
/*
* Ok, we have the page, and it's up-to-date, so
* now we can copy it to user space...
- *
- * The file_read_actor routine returns how many bytes were
- * actually used..
- * NOTE! This may not be the same as how much of a user buffer
- * we filled up (we may be padding etc), so we can only update
- * "pos" here (the actor routine has to update the user buffer
- * pointers and the remaining count).
*/
- ret = file_read_actor(desc, page, offset, nr);
+
+ ret = copy_page_to_iter(page, offset, nr, iter);
offset += ret;
index += offset >> PAGE_CACHE_SHIFT;
offset &= ~PAGE_CACHE_MASK;
prev_offset = offset;
page_cache_release(page);
- if (ret == nr && desc->count)
- continue;
- goto out;
+ written += ret;
+ if (!iov_iter_count(iter))
+ goto out;
+ if (ret < nr) {
+ error = -EFAULT;
+ goto out;
+ }
+ continue;
page_not_up_to_date:
/* Get exclusive access to the page ... */
if (unlikely(error)) {
if (error == AOP_TRUNCATED_PAGE) {
page_cache_release(page);
+ error = 0;
goto find_page;
}
goto readpage_error;
readpage_error:
/* UHHUH! A synchronous read error occurred. Report it */
- desc->error = error;
page_cache_release(page);
goto out;
*/
page = page_cache_alloc_cold(mapping);
if (!page) {
- desc->error = -ENOMEM;
+ error = -ENOMEM;
goto out;
}
error = add_to_page_cache_lru(page, mapping,
index, GFP_KERNEL);
if (error) {
page_cache_release(page);
- if (error == -EEXIST)
+ if (error == -EEXIST) {
+ error = 0;
goto find_page;
- desc->error = error;
+ }
goto out;
}
goto readpage;
*ppos = ((loff_t)index << PAGE_CACHE_SHIFT) + offset;
file_accessed(filp);
-}
-
-int file_read_actor(read_descriptor_t *desc, struct page *page,
- unsigned long offset, unsigned long size)
-{
- char *kaddr;
- unsigned long left, count = desc->count;
-
- if (size > count)
- size = count;
-
- /*
- * Faults on the destination of a read are common, so do it before
- * taking the kmap.
- */
- if (!fault_in_pages_writeable(desc->arg.buf, size)) {
- kaddr = kmap_atomic(page);
- left = __copy_to_user_inatomic(desc->arg.buf,
- kaddr + offset, size);
- kunmap_atomic(kaddr);
- if (left == 0)
- goto success;
- }
-
- /* Do it the slow way */
- kaddr = kmap(page);
- left = __copy_to_user(desc->arg.buf, kaddr + offset, size);
- kunmap(page);
-
- if (left) {
- size -= left;
- desc->error = -EFAULT;
- }
-success:
- desc->count = count - size;
- desc->written += size;
- desc->arg.buf += size;
- return size;
+ return written ? written : error;
}
/*
{
struct file *filp = iocb->ki_filp;
ssize_t retval;
- unsigned long seg = 0;
size_t count;
loff_t *ppos = &iocb->ki_pos;
+ struct iov_iter i;
count = 0;
retval = generic_segment_checks(iov, &nr_segs, &count, VERIFY_WRITE);
if (retval)
return retval;
+ iov_iter_init(&i, iov, nr_segs, count, 0);
/* coalesce the iovecs and go direct-to-BIO for O_DIRECT */
if (filp->f_flags & O_DIRECT) {
if (retval > 0) {
*ppos = pos + retval;
count -= retval;
+ /*
+ * If we did a short DIO read we need to skip the
+ * section of the iov that we've already read data into.
+ */
+ iov_iter_advance(&i, retval);
}
/*
}
}
- count = retval;
- for (seg = 0; seg < nr_segs; seg++) {
- read_descriptor_t desc;
- loff_t offset = 0;
-
- /*
- * If we did a short DIO read we need to skip the section of the
- * iov that we've already read data into.
- */
- if (count) {
- if (count > iov[seg].iov_len) {
- count -= iov[seg].iov_len;
- continue;
- }
- offset = count;
- count = 0;
- }
-
- desc.written = 0;
- desc.arg.buf = iov[seg].iov_base + offset;
- desc.count = iov[seg].iov_len - offset;
- if (desc.count == 0)
- continue;
- desc.error = 0;
- do_generic_file_read(filp, ppos, &desc);
- retval += desc.written;
- if (desc.error) {
- retval = retval ?: desc.error;
- break;
- }
- if (desc.count > 0)
- break;
- }
+ retval = do_generic_file_read(filp, ppos, &i, retval);
out:
return retval;
}
}
EXPORT_SYMBOL(read_cache_page_gfp);
-static size_t __iovec_copy_from_user_inatomic(char *vaddr,
- const struct iovec *iov, size_t base, size_t bytes)
-{
- size_t copied = 0, left = 0;
-
- while (bytes) {
- char __user *buf = iov->iov_base + base;
- int copy = min(bytes, iov->iov_len - base);
-
- base = 0;
- left = __copy_from_user_inatomic(vaddr, buf, copy);
- copied += copy;
- bytes -= copy;
- vaddr += copy;
- iov++;
-
- if (unlikely(left))
- break;
- }
- return copied - left;
-}
-
-/*
- * Copy as much as we can into the page and return the number of bytes which
- * were successfully copied. If a fault is encountered then return the number of
- * bytes which were copied.
- */
-size_t iov_iter_copy_from_user_atomic(struct page *page,
- struct iov_iter *i, unsigned long offset, size_t bytes)
-{
- char *kaddr;
- size_t copied;
-
- BUG_ON(!in_atomic());
- kaddr = kmap_atomic(page);
- if (likely(i->nr_segs == 1)) {
- int left;
- char __user *buf = i->iov->iov_base + i->iov_offset;
- left = __copy_from_user_inatomic(kaddr + offset, buf, bytes);
- copied = bytes - left;
- } else {
- copied = __iovec_copy_from_user_inatomic(kaddr + offset,
- i->iov, i->iov_offset, bytes);
- }
- kunmap_atomic(kaddr);
-
- return copied;
-}
-EXPORT_SYMBOL(iov_iter_copy_from_user_atomic);
-
-/*
- * This has the same sideeffects and return value as
- * iov_iter_copy_from_user_atomic().
- * The difference is that it attempts to resolve faults.
- * Page must not be locked.
- */
-size_t iov_iter_copy_from_user(struct page *page,
- struct iov_iter *i, unsigned long offset, size_t bytes)
-{
- char *kaddr;
- size_t copied;
-
- kaddr = kmap(page);
- if (likely(i->nr_segs == 1)) {
- int left;
- char __user *buf = i->iov->iov_base + i->iov_offset;
- left = __copy_from_user(kaddr + offset, buf, bytes);
- copied = bytes - left;
- } else {
- copied = __iovec_copy_from_user_inatomic(kaddr + offset,
- i->iov, i->iov_offset, bytes);
- }
- kunmap(page);
- return copied;
-}
-EXPORT_SYMBOL(iov_iter_copy_from_user);
-
-void iov_iter_advance(struct iov_iter *i, size_t bytes)
-{
- BUG_ON(i->count < bytes);
-
- if (likely(i->nr_segs == 1)) {
- i->iov_offset += bytes;
- i->count -= bytes;
- } else {
- const struct iovec *iov = i->iov;
- size_t base = i->iov_offset;
- unsigned long nr_segs = i->nr_segs;
-
- /*
- * The !iov->iov_len check ensures we skip over unlikely
- * zero-length segments (without overruning the iovec).
- */
- while (bytes || unlikely(i->count && !iov->iov_len)) {
- int copy;
-
- copy = min(bytes, iov->iov_len - base);
- BUG_ON(!i->count || i->count < copy);
- i->count -= copy;
- bytes -= copy;
- base += copy;
- if (iov->iov_len == base) {
- iov++;
- nr_segs--;
- base = 0;
- }
- }
- i->iov = iov;
- i->iov_offset = base;
- i->nr_segs = nr_segs;
- }
-}
-EXPORT_SYMBOL(iov_iter_advance);
-
-/*
- * Fault in the first iovec of the given iov_iter, to a maximum length
- * of bytes. Returns 0 on success, or non-zero if the memory could not be
- * accessed (ie. because it is an invalid address).
- *
- * writev-intensive code may want this to prefault several iovecs -- that
- * would be possible (callers must not rely on the fact that _only_ the
- * first iovec will be faulted with the current implementation).
- */
-int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes)
-{
- char __user *buf = i->iov->iov_base + i->iov_offset;
- bytes = min(bytes, i->iov->iov_len - i->iov_offset);
- return fault_in_pages_readable(buf, bytes);
-}
-EXPORT_SYMBOL(iov_iter_fault_in_readable);
-
-/*
- * Return the count of just the current iov_iter segment.
- */
-size_t iov_iter_single_seg_count(const struct iov_iter *i)
-{
- const struct iovec *iov = i->iov;
- if (i->nr_segs == 1)
- return i->count;
- else
- return min(i->count, iov->iov_len - i->iov_offset);
-}
-EXPORT_SYMBOL(iov_iter_single_seg_count);
-
/*
* Performs necessary checks before doing a write
*
ssize_t
generic_file_direct_write(struct kiocb *iocb, const struct iovec *iov,
- unsigned long *nr_segs, loff_t pos, loff_t *ppos,
+ unsigned long *nr_segs, loff_t pos,
size_t count, size_t ocount)
{
struct file *file = iocb->ki_filp;
i_size_write(inode, pos);
mark_inode_dirty(inode);
}
- *ppos = pos;
+ iocb->ki_pos = pos;
}
out:
return written;
}
EXPORT_SYMBOL(grab_cache_page_write_begin);
-static ssize_t generic_perform_write(struct file *file,
+ssize_t generic_perform_write(struct file *file,
struct iov_iter *i, loff_t pos)
{
struct address_space *mapping = file->f_mapping;
if (mapping_writably_mapped(mapping))
flush_dcache_page(page);
- pagefault_disable();
copied = iov_iter_copy_from_user_atomic(page, i, offset, bytes);
- pagefault_enable();
flush_dcache_page(page);
mark_page_accessed(page);
return written ? written : status;
}
-
-ssize_t
-generic_file_buffered_write(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t pos, loff_t *ppos,
- size_t count, ssize_t written)
-{
- struct file *file = iocb->ki_filp;
- ssize_t status;
- struct iov_iter i;
-
- iov_iter_init(&i, iov, nr_segs, count, written);
- status = generic_perform_write(file, &i, pos);
-
- if (likely(status >= 0)) {
- written += status;
- *ppos = pos + status;
- }
-
- return written ? written : status;
-}
-EXPORT_SYMBOL(generic_file_buffered_write);
+EXPORT_SYMBOL(generic_perform_write);
/**
* __generic_file_aio_write - write data to a file
* avoid syncing under i_mutex.
*/
ssize_t __generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov,
- unsigned long nr_segs, loff_t *ppos)
+ unsigned long nr_segs)
{
struct file *file = iocb->ki_filp;
struct address_space * mapping = file->f_mapping;
size_t ocount; /* original count */
size_t count; /* after file limit checks */
struct inode *inode = mapping->host;
- loff_t pos;
- ssize_t written;
+ loff_t pos = iocb->ki_pos;
+ ssize_t written = 0;
ssize_t err;
+ ssize_t status;
+ struct iov_iter from;
ocount = 0;
err = generic_segment_checks(iov, &nr_segs, &ocount, VERIFY_READ);
return err;
count = ocount;
- pos = *ppos;
/* We can write back this queue in page reclaim */
current->backing_dev_info = mapping->backing_dev_info;
- written = 0;
-
err = generic_write_checks(file, &pos, &count, S_ISBLK(inode->i_mode));
if (err)
goto out;
if (err)
goto out;
+ iov_iter_init(&from, iov, nr_segs, count, 0);
+
/* coalesce the iovecs and go direct-to-BIO for O_DIRECT */
if (unlikely(file->f_flags & O_DIRECT)) {
loff_t endbyte;
- ssize_t written_buffered;
- written = generic_file_direct_write(iocb, iov, &nr_segs, pos,
- ppos, count, ocount);
+ written = generic_file_direct_write(iocb, iov, &from.nr_segs, pos,
+ count, ocount);
if (written < 0 || written == count)
goto out;
+ iov_iter_advance(&from, written);
+
/*
* direct-io write to a hole: fall through to buffered I/O
* for completing the rest of the request.
*/
pos += written;
count -= written;
- written_buffered = generic_file_buffered_write(iocb, iov,
- nr_segs, pos, ppos, count,
- written);
+
+ status = generic_perform_write(file, &from, pos);
/*
- * If generic_file_buffered_write() retuned a synchronous error
+ * If generic_perform_write() returned a synchronous error
* then we want to return the number of bytes which were
* direct-written, or the error code if that was zero. Note
* that this differs from normal direct-io semantics, which
* will return -EFOO even if some bytes were written.
*/
- if (written_buffered < 0) {
- err = written_buffered;
+ if (unlikely(status < 0) && !written) {
+ err = status;
goto out;
}
-
+ iocb->ki_pos = pos + status;
/*
* We need to ensure that the page cache pages are written to
* disk and invalidated to preserve the expected O_DIRECT
* semantics.
*/
- endbyte = pos + written_buffered - written - 1;
+ endbyte = pos + status - 1;
err = filemap_write_and_wait_range(file->f_mapping, pos, endbyte);
if (err == 0) {
- written = written_buffered;
+ written += status;
invalidate_mapping_pages(mapping,
pos >> PAGE_CACHE_SHIFT,
endbyte >> PAGE_CACHE_SHIFT);
*/
}
} else {
- written = generic_file_buffered_write(iocb, iov, nr_segs,
- pos, ppos, count, written);
+ written = generic_perform_write(file, &from, pos);
+ if (likely(written >= 0))
+ iocb->ki_pos = pos + written;
}
out:
current->backing_dev_info = NULL;
BUG_ON(iocb->ki_pos != pos);
mutex_lock(&inode->i_mutex);
- ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos);
+ ret = __generic_file_aio_write(iocb, iov, nr_segs);
mutex_unlock(&inode->i_mutex);
if (ret > 0) {
--- /dev/null
+#include <linux/export.h>
+#include <linux/uio.h>
+#include <linux/pagemap.h>
+
+size_t copy_page_to_iter(struct page *page, size_t offset, size_t bytes,
+ struct iov_iter *i)
+{
+ size_t skip, copy, left, wanted;
+ const struct iovec *iov;
+ char __user *buf;
+ void *kaddr, *from;
+
+ if (unlikely(bytes > i->count))
+ bytes = i->count;
+
+ if (unlikely(!bytes))
+ return 0;
+
+ wanted = bytes;
+ iov = i->iov;
+ skip = i->iov_offset;
+ buf = iov->iov_base + skip;
+ copy = min(bytes, iov->iov_len - skip);
+
+ if (!fault_in_pages_writeable(buf, copy)) {
+ kaddr = kmap_atomic(page);
+ from = kaddr + offset;
+
+ /* first chunk, usually the only one */
+ left = __copy_to_user_inatomic(buf, from, copy);
+ copy -= left;
+ skip += copy;
+ from += copy;
+ bytes -= copy;
+
+ while (unlikely(!left && bytes)) {
+ iov++;
+ buf = iov->iov_base;
+ copy = min(bytes, iov->iov_len);
+ left = __copy_to_user_inatomic(buf, from, copy);
+ copy -= left;
+ skip = copy;
+ from += copy;
+ bytes -= copy;
+ }
+ if (likely(!bytes)) {
+ kunmap_atomic(kaddr);
+ goto done;
+ }
+ offset = from - kaddr;
+ buf += copy;
+ kunmap_atomic(kaddr);
+ copy = min(bytes, iov->iov_len - skip);
+ }
+ /* Too bad - revert to non-atomic kmap */
+ kaddr = kmap(page);
+ from = kaddr + offset;
+ left = __copy_to_user(buf, from, copy);
+ copy -= left;
+ skip += copy;
+ from += copy;
+ bytes -= copy;
+ while (unlikely(!left && bytes)) {
+ iov++;
+ buf = iov->iov_base;
+ copy = min(bytes, iov->iov_len);
+ left = __copy_to_user(buf, from, copy);
+ copy -= left;
+ skip = copy;
+ from += copy;
+ bytes -= copy;
+ }
+ kunmap(page);
+done:
+ i->count -= wanted - bytes;
+ i->nr_segs -= iov - i->iov;
+ i->iov = iov;
+ i->iov_offset = skip;
+ return wanted - bytes;
+}
+EXPORT_SYMBOL(copy_page_to_iter);
+
+static size_t __iovec_copy_from_user_inatomic(char *vaddr,
+ const struct iovec *iov, size_t base, size_t bytes)
+{
+ size_t copied = 0, left = 0;
+
+ while (bytes) {
+ char __user *buf = iov->iov_base + base;
+ int copy = min(bytes, iov->iov_len - base);
+
+ base = 0;
+ left = __copy_from_user_inatomic(vaddr, buf, copy);
+ copied += copy;
+ bytes -= copy;
+ vaddr += copy;
+ iov++;
+
+ if (unlikely(left))
+ break;
+ }
+ return copied - left;
+}
+
+/*
+ * Copy as much as we can into the page and return the number of bytes which
+ * were successfully copied. If a fault is encountered then return the number of
+ * bytes which were copied.
+ */
+size_t iov_iter_copy_from_user_atomic(struct page *page,
+ struct iov_iter *i, unsigned long offset, size_t bytes)
+{
+ char *kaddr;
+ size_t copied;
+
+ kaddr = kmap_atomic(page);
+ if (likely(i->nr_segs == 1)) {
+ int left;
+ char __user *buf = i->iov->iov_base + i->iov_offset;
+ left = __copy_from_user_inatomic(kaddr + offset, buf, bytes);
+ copied = bytes - left;
+ } else {
+ copied = __iovec_copy_from_user_inatomic(kaddr + offset,
+ i->iov, i->iov_offset, bytes);
+ }
+ kunmap_atomic(kaddr);
+
+ return copied;
+}
+EXPORT_SYMBOL(iov_iter_copy_from_user_atomic);
+
+/*
+ * This has the same sideeffects and return value as
+ * iov_iter_copy_from_user_atomic().
+ * The difference is that it attempts to resolve faults.
+ * Page must not be locked.
+ */
+size_t iov_iter_copy_from_user(struct page *page,
+ struct iov_iter *i, unsigned long offset, size_t bytes)
+{
+ char *kaddr;
+ size_t copied;
+
+ kaddr = kmap(page);
+ if (likely(i->nr_segs == 1)) {
+ int left;
+ char __user *buf = i->iov->iov_base + i->iov_offset;
+ left = __copy_from_user(kaddr + offset, buf, bytes);
+ copied = bytes - left;
+ } else {
+ copied = __iovec_copy_from_user_inatomic(kaddr + offset,
+ i->iov, i->iov_offset, bytes);
+ }
+ kunmap(page);
+ return copied;
+}
+EXPORT_SYMBOL(iov_iter_copy_from_user);
+
+void iov_iter_advance(struct iov_iter *i, size_t bytes)
+{
+ BUG_ON(i->count < bytes);
+
+ if (likely(i->nr_segs == 1)) {
+ i->iov_offset += bytes;
+ i->count -= bytes;
+ } else {
+ const struct iovec *iov = i->iov;
+ size_t base = i->iov_offset;
+ unsigned long nr_segs = i->nr_segs;
+
+ /*
+ * The !iov->iov_len check ensures we skip over unlikely
+ * zero-length segments (without overruning the iovec).
+ */
+ while (bytes || unlikely(i->count && !iov->iov_len)) {
+ int copy;
+
+ copy = min(bytes, iov->iov_len - base);
+ BUG_ON(!i->count || i->count < copy);
+ i->count -= copy;
+ bytes -= copy;
+ base += copy;
+ if (iov->iov_len == base) {
+ iov++;
+ nr_segs--;
+ base = 0;
+ }
+ }
+ i->iov = iov;
+ i->iov_offset = base;
+ i->nr_segs = nr_segs;
+ }
+}
+EXPORT_SYMBOL(iov_iter_advance);
+
+/*
+ * Fault in the first iovec of the given iov_iter, to a maximum length
+ * of bytes. Returns 0 on success, or non-zero if the memory could not be
+ * accessed (ie. because it is an invalid address).
+ *
+ * writev-intensive code may want this to prefault several iovecs -- that
+ * would be possible (callers must not rely on the fact that _only_ the
+ * first iovec will be faulted with the current implementation).
+ */
+int iov_iter_fault_in_readable(struct iov_iter *i, size_t bytes)
+{
+ char __user *buf = i->iov->iov_base + i->iov_offset;
+ bytes = min(bytes, i->iov->iov_len - i->iov_offset);
+ return fault_in_pages_readable(buf, bytes);
+}
+EXPORT_SYMBOL(iov_iter_fault_in_readable);
+
+/*
+ * Return the count of just the current iov_iter segment.
+ */
+size_t iov_iter_single_seg_count(const struct iov_iter *i)
+{
+ const struct iovec *iov = i->iov;
+ if (i->nr_segs == 1)
+ return i->count;
+ else
+ return min(i->count, iov->iov_len - i->iov_offset);
+}
+EXPORT_SYMBOL(iov_iter_single_seg_count);
/**
* process_vm_rw_pages - read/write pages from task specified
- * @task: task to read/write from
- * @mm: mm for task
- * @process_pages: struct pages area that can store at least
- * nr_pages_to_copy struct page pointers
- * @pa: address of page in task to start copying from/to
+ * @pages: array of pointers to pages we want to copy
* @start_offset: offset in page to start copying from/to
* @len: number of bytes to copy
- * @lvec: iovec array specifying where to copy to/from
- * @lvec_cnt: number of elements in iovec array
- * @lvec_current: index in iovec array we are up to
- * @lvec_offset: offset in bytes from current iovec iov_base we are up to
+ * @iter: where to copy to/from locally
* @vm_write: 0 means copy from, 1 means copy to
- * @nr_pages_to_copy: number of pages to copy
- * @bytes_copied: returns number of bytes successfully copied
* Returns 0 on success, error code otherwise
*/
-static int process_vm_rw_pages(struct task_struct *task,
- struct mm_struct *mm,
- struct page **process_pages,
- unsigned long pa,
- unsigned long start_offset,
- unsigned long len,
- const struct iovec *lvec,
- unsigned long lvec_cnt,
- unsigned long *lvec_current,
- size_t *lvec_offset,
- int vm_write,
- unsigned int nr_pages_to_copy,
- ssize_t *bytes_copied)
+static int process_vm_rw_pages(struct page **pages,
+ unsigned offset,
+ size_t len,
+ struct iov_iter *iter,
+ int vm_write)
{
- int pages_pinned;
- void *target_kaddr;
- int pgs_copied = 0;
- int j;
- int ret;
- ssize_t bytes_to_copy;
- ssize_t rc = 0;
-
- *bytes_copied = 0;
-
- /* Get the pages we're interested in */
- down_read(&mm->mmap_sem);
- pages_pinned = get_user_pages(task, mm, pa,
- nr_pages_to_copy,
- vm_write, 0, process_pages, NULL);
- up_read(&mm->mmap_sem);
-
- if (pages_pinned != nr_pages_to_copy) {
- rc = -EFAULT;
- goto end;
- }
-
/* Do the copy for each page */
- for (pgs_copied = 0;
- (pgs_copied < nr_pages_to_copy) && (*lvec_current < lvec_cnt);
- pgs_copied++) {
- /* Make sure we have a non zero length iovec */
- while (*lvec_current < lvec_cnt
- && lvec[*lvec_current].iov_len == 0)
- (*lvec_current)++;
- if (*lvec_current == lvec_cnt)
- break;
-
- /*
- * Will copy smallest of:
- * - bytes remaining in page
- * - bytes remaining in destination iovec
- */
- bytes_to_copy = min_t(ssize_t, PAGE_SIZE - start_offset,
- len - *bytes_copied);
- bytes_to_copy = min_t(ssize_t, bytes_to_copy,
- lvec[*lvec_current].iov_len
- - *lvec_offset);
-
- target_kaddr = kmap(process_pages[pgs_copied]) + start_offset;
-
- if (vm_write)
- ret = copy_from_user(target_kaddr,
- lvec[*lvec_current].iov_base
- + *lvec_offset,
- bytes_to_copy);
- else
- ret = copy_to_user(lvec[*lvec_current].iov_base
- + *lvec_offset,
- target_kaddr, bytes_to_copy);
- kunmap(process_pages[pgs_copied]);
- if (ret) {
- *bytes_copied += bytes_to_copy - ret;
- pgs_copied++;
- rc = -EFAULT;
- goto end;
- }
- *bytes_copied += bytes_to_copy;
- *lvec_offset += bytes_to_copy;
- if (*lvec_offset == lvec[*lvec_current].iov_len) {
- /*
- * Need to copy remaining part of page into the
- * next iovec if there are any bytes left in page
- */
- (*lvec_current)++;
- *lvec_offset = 0;
- start_offset = (start_offset + bytes_to_copy)
- % PAGE_SIZE;
- if (start_offset)
- pgs_copied--;
+ while (len && iov_iter_count(iter)) {
+ struct page *page = *pages++;
+ size_t copy = PAGE_SIZE - offset;
+ size_t copied;
+
+ if (copy > len)
+ copy = len;
+
+ if (vm_write) {
+ if (copy > iov_iter_count(iter))
+ copy = iov_iter_count(iter);
+ copied = iov_iter_copy_from_user(page, iter,
+ offset, copy);
+ iov_iter_advance(iter, copied);
+ set_page_dirty_lock(page);
} else {
- start_offset = 0;
- }
- }
-
-end:
- if (vm_write) {
- for (j = 0; j < pages_pinned; j++) {
- if (j < pgs_copied)
- set_page_dirty_lock(process_pages[j]);
- put_page(process_pages[j]);
+ copied = copy_page_to_iter(page, offset, copy, iter);
}
- } else {
- for (j = 0; j < pages_pinned; j++)
- put_page(process_pages[j]);
+ len -= copied;
+ if (copied < copy && iov_iter_count(iter))
+ return -EFAULT;
+ offset = 0;
}
-
- return rc;
+ return 0;
}
/* Maximum number of pages kmalloc'd to hold struct page's during copy */
* process_vm_rw_single_vec - read/write pages from task specified
* @addr: start memory address of target process
* @len: size of area to copy to/from
- * @lvec: iovec array specifying where to copy to/from locally
- * @lvec_cnt: number of elements in iovec array
- * @lvec_current: index in iovec array we are up to
- * @lvec_offset: offset in bytes from current iovec iov_base we are up to
+ * @iter: where to copy to/from locally
* @process_pages: struct pages area that can store at least
* nr_pages_to_copy struct page pointers
* @mm: mm for task
* @task: task to read/write from
* @vm_write: 0 means copy from, 1 means copy to
- * @bytes_copied: returns number of bytes successfully copied
* Returns 0 on success or on failure error code
*/
static int process_vm_rw_single_vec(unsigned long addr,
unsigned long len,
- const struct iovec *lvec,
- unsigned long lvec_cnt,
- unsigned long *lvec_current,
- size_t *lvec_offset,
+ struct iov_iter *iter,
struct page **process_pages,
struct mm_struct *mm,
struct task_struct *task,
- int vm_write,
- ssize_t *bytes_copied)
+ int vm_write)
{
unsigned long pa = addr & PAGE_MASK;
unsigned long start_offset = addr - pa;
unsigned long nr_pages;
- ssize_t bytes_copied_loop;
ssize_t rc = 0;
- unsigned long nr_pages_copied = 0;
- unsigned long nr_pages_to_copy;
unsigned long max_pages_per_loop = PVM_MAX_KMALLOC_PAGES
/ sizeof(struct pages *);
- *bytes_copied = 0;
-
/* Work out address and page range required */
if (len == 0)
return 0;
nr_pages = (addr + len - 1) / PAGE_SIZE - addr / PAGE_SIZE + 1;
- while ((nr_pages_copied < nr_pages) && (*lvec_current < lvec_cnt)) {
- nr_pages_to_copy = min(nr_pages - nr_pages_copied,
- max_pages_per_loop);
+ while (!rc && nr_pages && iov_iter_count(iter)) {
+ int pages = min(nr_pages, max_pages_per_loop);
+ size_t bytes;
- rc = process_vm_rw_pages(task, mm, process_pages, pa,
- start_offset, len,
- lvec, lvec_cnt,
- lvec_current, lvec_offset,
- vm_write, nr_pages_to_copy,
- &bytes_copied_loop);
- start_offset = 0;
- *bytes_copied += bytes_copied_loop;
+ /* Get the pages we're interested in */
+ down_read(&mm->mmap_sem);
+ pages = get_user_pages(task, mm, pa, pages,
+ vm_write, 0, process_pages, NULL);
+ up_read(&mm->mmap_sem);
- if (rc < 0) {
- return rc;
- } else {
- len -= bytes_copied_loop;
- nr_pages_copied += nr_pages_to_copy;
- pa += nr_pages_to_copy * PAGE_SIZE;
- }
+ if (pages <= 0)
+ return -EFAULT;
+
+ bytes = pages * PAGE_SIZE - start_offset;
+ if (bytes > len)
+ bytes = len;
+
+ rc = process_vm_rw_pages(process_pages,
+ start_offset, bytes, iter,
+ vm_write);
+ len -= bytes;
+ start_offset = 0;
+ nr_pages -= pages;
+ pa += pages * PAGE_SIZE;
+ while (pages)
+ put_page(process_pages[--pages]);
}
return rc;
/**
* process_vm_rw_core - core of reading/writing pages from task specified
* @pid: PID of process to read/write from/to
- * @lvec: iovec array specifying where to copy to/from locally
- * @liovcnt: size of lvec array
+ * @iter: where to copy to/from locally
* @rvec: iovec array specifying where to copy to/from in the other process
* @riovcnt: size of rvec array
* @flags: currently unused
* return less bytes than expected if an error occurs during the copying
* process.
*/
-static ssize_t process_vm_rw_core(pid_t pid, const struct iovec *lvec,
- unsigned long liovcnt,
+static ssize_t process_vm_rw_core(pid_t pid, struct iov_iter *iter,
const struct iovec *rvec,
unsigned long riovcnt,
unsigned long flags, int vm_write)
struct mm_struct *mm;
unsigned long i;
ssize_t rc = 0;
- ssize_t bytes_copied_loop;
- ssize_t bytes_copied = 0;
unsigned long nr_pages = 0;
unsigned long nr_pages_iov;
- unsigned long iov_l_curr_idx = 0;
- size_t iov_l_curr_offset = 0;
ssize_t iov_len;
+ size_t total_len = iov_iter_count(iter);
/*
* Work out how many pages of struct pages we're going to need
goto put_task_struct;
}
- for (i = 0; i < riovcnt && iov_l_curr_idx < liovcnt; i++) {
+ for (i = 0; i < riovcnt && iov_iter_count(iter) && !rc; i++)
rc = process_vm_rw_single_vec(
(unsigned long)rvec[i].iov_base, rvec[i].iov_len,
- lvec, liovcnt, &iov_l_curr_idx, &iov_l_curr_offset,
- process_pages, mm, task, vm_write, &bytes_copied_loop);
- bytes_copied += bytes_copied_loop;
- if (rc != 0) {
- /* If we have managed to copy any data at all then
- we return the number of bytes copied. Otherwise
- we return the error code */
- if (bytes_copied)
- rc = bytes_copied;
- goto put_mm;
- }
- }
+ iter, process_pages, mm, task, vm_write);
+
+ /* copied = space before - space after */
+ total_len -= iov_iter_count(iter);
+
+ /* If we have managed to copy any data at all then
+ we return the number of bytes copied. Otherwise
+ we return the error code */
+ if (total_len)
+ rc = total_len;
- rc = bytes_copied;
-put_mm:
mmput(mm);
put_task_struct:
struct iovec iovstack_r[UIO_FASTIOV];
struct iovec *iov_l = iovstack_l;
struct iovec *iov_r = iovstack_r;
+ struct iov_iter iter;
ssize_t rc;
if (flags != 0)
if (rc <= 0)
goto free_iovecs;
+ iov_iter_init(&iter, iov_l, liovcnt, rc, 0);
+
rc = rw_copy_check_uvector(CHECK_IOVEC_ONLY, rvec, riovcnt, UIO_FASTIOV,
iovstack_r, &iov_r);
if (rc <= 0)
goto free_iovecs;
- rc = process_vm_rw_core(pid, iov_l, liovcnt, iov_r, riovcnt, flags,
- vm_write);
+ rc = process_vm_rw_core(pid, &iter, iov_r, riovcnt, flags, vm_write);
free_iovecs:
if (iov_r != iovstack_r)
struct iovec iovstack_r[UIO_FASTIOV];
struct iovec *iov_l = iovstack_l;
struct iovec *iov_r = iovstack_r;
+ struct iov_iter iter;
ssize_t rc = -EFAULT;
if (flags != 0)
&iov_l);
if (rc <= 0)
goto free_iovecs;
+ iov_iter_init(&iter, iov_l, liovcnt, rc, 0);
rc = compat_rw_copy_check_uvector(CHECK_IOVEC_ONLY, rvec, riovcnt,
UIO_FASTIOV, iovstack_r,
&iov_r);
if (rc <= 0)
goto free_iovecs;
- rc = process_vm_rw_core(pid, iov_l, liovcnt, iov_r, riovcnt, flags,
- vm_write);
+ rc = process_vm_rw_core(pid, &iter, iov_r, riovcnt, flags, vm_write);
free_iovecs:
if (iov_r != iovstack_r)
return copied;
}
-static void do_shmem_file_read(struct file *filp, loff_t *ppos, read_descriptor_t *desc, read_actor_t actor)
+static ssize_t shmem_file_aio_read(struct kiocb *iocb,
+ const struct iovec *iov, unsigned long nr_segs, loff_t pos)
{
- struct inode *inode = file_inode(filp);
+ struct file *file = iocb->ki_filp;
+ struct inode *inode = file_inode(file);
struct address_space *mapping = inode->i_mapping;
pgoff_t index;
unsigned long offset;
enum sgp_type sgp = SGP_READ;
+ int error;
+ ssize_t retval;
+ size_t count;
+ loff_t *ppos = &iocb->ki_pos;
+ struct iov_iter iter;
+
+ retval = generic_segment_checks(iov, &nr_segs, &count, VERIFY_WRITE);
+ if (retval)
+ return retval;
+ iov_iter_init(&iter, iov, nr_segs, count, 0);
/*
* Might this read be for a stacking filesystem? Then when reading
break;
}
- desc->error = shmem_getpage(inode, index, &page, sgp, NULL);
- if (desc->error) {
- if (desc->error == -EINVAL)
- desc->error = 0;
+ error = shmem_getpage(inode, index, &page, sgp, NULL);
+ if (error) {
+ if (error == -EINVAL)
+ error = 0;
break;
}
if (page)
/*
* Ok, we have the page, and it's up-to-date, so
* now we can copy it to user space...
- *
- * The actor routine returns how many bytes were actually used..
- * NOTE! This may not be the same as how much of a user buffer
- * we filled up (we may be padding etc), so we can only update
- * "pos" here (the actor routine has to update the user buffer
- * pointers and the remaining count).
*/
- ret = actor(desc, page, offset, nr);
+ ret = copy_page_to_iter(page, offset, nr, &iter);
+ retval += ret;
offset += ret;
index += offset >> PAGE_CACHE_SHIFT;
offset &= ~PAGE_CACHE_MASK;
page_cache_release(page);
- if (ret != nr || !desc->count)
+ if (!iov_iter_count(&iter))
break;
-
+ if (ret < nr) {
+ error = -EFAULT;
+ break;
+ }
cond_resched();
}
*ppos = ((loff_t) index << PAGE_CACHE_SHIFT) + offset;
- file_accessed(filp);
-}
-
-static ssize_t shmem_file_aio_read(struct kiocb *iocb,
- const struct iovec *iov, unsigned long nr_segs, loff_t pos)
-{
- struct file *filp = iocb->ki_filp;
- ssize_t retval;
- unsigned long seg;
- size_t count;
- loff_t *ppos = &iocb->ki_pos;
-
- retval = generic_segment_checks(iov, &nr_segs, &count, VERIFY_WRITE);
- if (retval)
- return retval;
-
- for (seg = 0; seg < nr_segs; seg++) {
- read_descriptor_t desc;
-
- desc.written = 0;
- desc.arg.buf = iov[seg].iov_base;
- desc.count = iov[seg].iov_len;
- if (desc.count == 0)
- continue;
- desc.error = 0;
- do_shmem_file_read(filp, ppos, &desc, file_read_actor);
- retval += desc.written;
- if (desc.error) {
- retval = retval ?: desc.error;
- break;
- }
- if (desc.count > 0)
- break;
- }
- return retval;
+ file_accessed(file);
+ return retval ? retval : error;
}
static ssize_t shmem_file_splice_read(struct file *in, loff_t *ppos,
index = *ppos >> PAGE_CACHE_SHIFT;
loff = *ppos & ~PAGE_CACHE_MASK;
req_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- nr_pages = min(req_pages, pipe->buffers);
+ nr_pages = min(req_pages, spd.nr_pages_max);
spd.nr_pages = find_get_pages_contig(mapping, index,
nr_pages, spd.pages);
return allowed;
}
+/**
+ * get_cmdline() - copy the cmdline value to a buffer.
+ * @task: the task whose cmdline value to copy.
+ * @buffer: the buffer to copy to.
+ * @buflen: the length of the buffer. Larger cmdline values are truncated
+ * to this length.
+ * Returns the size of the cmdline field copied. Note that the copy does
+ * not guarantee an ending NULL byte.
+ */
+int get_cmdline(struct task_struct *task, char *buffer, int buflen)
+{
+ int res = 0;
+ unsigned int len;
+ struct mm_struct *mm = get_task_mm(task);
+ if (!mm)
+ goto out;
+ if (!mm->arg_end)
+ goto out_mm; /* Shh! No looking before we're done */
+
+ len = mm->arg_end - mm->arg_start;
+
+ if (len > buflen)
+ len = buflen;
+
+ res = access_process_vm(task, mm->arg_start, buffer, len, 0);
+
+ /*
+ * If the nul at the end of args has been overwritten, then
+ * assume application is using setproctitle(3).
+ */
+ if (res > 0 && buffer[res-1] != '\0' && len < buflen) {
+ len = strnlen(buffer, res);
+ if (len < res) {
+ res = len;
+ } else {
+ len = mm->env_end - mm->env_start;
+ if (len > buflen - res)
+ len = buflen - res;
+ res += access_process_vm(task, mm->env_start,
+ buffer+res, len, 0);
+ res = strnlen(buffer, res);
+ }
+ }
+out_mm:
+ mmput(mm);
+out:
+ return res;
+}
/* Tracepoints definitions. */
EXPORT_TRACEPOINT_SYMBOL(kmalloc);
struct zone *zone = lruvec_zone(lruvec);
unsigned long anon_prio, file_prio;
enum scan_balance scan_balance;
- unsigned long anon, file, free;
+ unsigned long anon, file;
bool force_scan = false;
unsigned long ap, fp;
enum lru_list lru;
file = get_lru_size(lruvec, LRU_ACTIVE_FILE) +
get_lru_size(lruvec, LRU_INACTIVE_FILE);
- /*
- * If it's foreseeable that reclaiming the file cache won't be
- * enough to get the zone back into a desirable shape, we have
- * to swap. Better start now and leave the - probably heavily
- * thrashing - remaining file pages alone.
- */
- if (global_reclaim(sc)) {
- free = zone_page_state(zone, NR_FREE_PAGES);
- if (unlikely(file + free <= high_wmark_pages(zone))) {
- scan_balance = SCAN_ANON;
- goto out;
- }
- }
-
/*
* There is enough inactive page cache, do not reclaim
* anything from the anonymous working set right now.
* req: request received
*
*/
-void p9_client_cb(struct p9_client *c, struct p9_req_t *req)
+void p9_client_cb(struct p9_client *c, struct p9_req_t *req, int status)
{
p9_debug(P9_DEBUG_MUX, " tag %d\n", req->tc->tag);
+
+ /*
+ * This barrier is needed to make sure any change made to req before
+ * the other thread wakes up will indeed be seen by the waiting side.
+ */
+ smp_wmb();
+ req->status = status;
+
wake_up(req->wq);
p9_debug(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
}
if (IS_ERR(req))
return PTR_ERR(req);
-
/*
* if we haven't received a response for oldreq,
* remove it from the list
*/
- if (oldreq->status == REQ_STATUS_FLSH) {
- spin_lock(&c->lock);
- list_del(&oldreq->req_list);
- spin_unlock(&c->lock);
- }
+ if (oldreq->status == REQ_STATUS_SENT)
+ if (c->trans_mod->cancelled)
+ c->trans_mod->cancelled(c, oldreq);
p9_free_req(c, req);
return 0;
err = wait_event_interruptible(*req->wq,
req->status >= REQ_STATUS_RCVD);
+ /*
+ * Make sure our req is coherent with regard to updates in other
+ * threads - echoes to wmb() in the callback
+ */
+ smp_rmb();
+
if ((err == -ERESTARTSYS) && (c->status == Connected)
&& (type == P9_TFLUSH)) {
sigpending = 1;
int privport;
};
-/**
- * struct p9_trans_fd - transport state
- * @rd: reference to file to read from
- * @wr: reference of file to write to
- * @conn: connection state reference
- *
- */
-
-struct p9_trans_fd {
- struct file *rd;
- struct file *wr;
- struct p9_conn *conn;
-};
-
/*
* Option Parsing (code inspired by NFS code)
* - a little lazy - parse all fd-transport options
unsigned long wsched;
};
+/**
+ * struct p9_trans_fd - transport state
+ * @rd: reference to file to read from
+ * @wr: reference of file to write to
+ * @conn: connection state reference
+ *
+ */
+
+struct p9_trans_fd {
+ struct file *rd;
+ struct file *wr;
+ struct p9_conn conn;
+};
+
static void p9_poll_workfn(struct work_struct *work);
static DEFINE_SPINLOCK(p9_poll_lock);
m->err = err;
list_for_each_entry_safe(req, rtmp, &m->req_list, req_list) {
- req->status = REQ_STATUS_ERROR;
- if (!req->t_err)
- req->t_err = err;
list_move(&req->req_list, &cancel_list);
}
list_for_each_entry_safe(req, rtmp, &m->unsent_req_list, req_list) {
- req->status = REQ_STATUS_ERROR;
- if (!req->t_err)
- req->t_err = err;
list_move(&req->req_list, &cancel_list);
}
spin_unlock_irqrestore(&m->client->lock, flags);
list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
p9_debug(P9_DEBUG_ERROR, "call back req %p\n", req);
list_del(&req->req_list);
- p9_client_cb(m->client, req);
+ if (!req->t_err)
+ req->t_err = err;
+ p9_client_cb(m->client, req, REQ_STATUS_ERROR);
}
}
{
int n, err;
struct p9_conn *m;
+ int status = REQ_STATUS_ERROR;
m = container_of(work, struct p9_conn, rq);
"mux %p pkt: size: %d bytes tag: %d\n", m, n, tag);
m->req = p9_tag_lookup(m->client, tag);
- if (!m->req || (m->req->status != REQ_STATUS_SENT &&
- m->req->status != REQ_STATUS_FLSH)) {
+ if (!m->req || (m->req->status != REQ_STATUS_SENT)) {
p9_debug(P9_DEBUG_ERROR, "Unexpected packet tag %d\n",
tag);
err = -EIO;
p9_debug(P9_DEBUG_TRANS, "got new packet\n");
spin_lock(&m->client->lock);
if (m->req->status != REQ_STATUS_ERROR)
- m->req->status = REQ_STATUS_RCVD;
+ status = REQ_STATUS_RCVD;
list_del(&m->req->req_list);
spin_unlock(&m->client->lock);
- p9_client_cb(m->client, m->req);
+ p9_client_cb(m->client, m->req, status);
m->rbuf = NULL;
m->rpos = 0;
m->rsize = 0;
}
/**
- * p9_conn_create - allocate and initialize the per-session mux data
+ * p9_conn_create - initialize the per-session mux data
* @client: client instance
*
* Note: Creates the polling task if this is the first session.
*/
-static struct p9_conn *p9_conn_create(struct p9_client *client)
+static void p9_conn_create(struct p9_client *client)
{
int n;
- struct p9_conn *m;
+ struct p9_trans_fd *ts = client->trans;
+ struct p9_conn *m = &ts->conn;
p9_debug(P9_DEBUG_TRANS, "client %p msize %d\n", client, client->msize);
- m = kzalloc(sizeof(struct p9_conn), GFP_KERNEL);
- if (!m)
- return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&m->mux_list);
m->client = client;
p9_debug(P9_DEBUG_TRANS, "mux %p can write\n", m);
set_bit(Wpending, &m->wsched);
}
-
- return m;
}
/**
{
int n;
struct p9_trans_fd *ts = client->trans;
- struct p9_conn *m = ts->conn;
+ struct p9_conn *m = &ts->conn;
p9_debug(P9_DEBUG_TRANS, "mux %p task %p tcall %p id %d\n",
m, current, req->tc, req->tc->id);
list_del(&req->req_list);
req->status = REQ_STATUS_FLSHD;
ret = 0;
- } else if (req->status == REQ_STATUS_SENT)
- req->status = REQ_STATUS_FLSH;
-
+ }
spin_unlock(&client->lock);
return ret;
}
+static int p9_fd_cancelled(struct p9_client *client, struct p9_req_t *req)
+{
+ p9_debug(P9_DEBUG_TRANS, "client %p req %p\n", client, req);
+
+ /* we haven't received a response for oldreq,
+ * remove it from the list.
+ */
+ spin_lock(&client->lock);
+ list_del(&req->req_list);
+ spin_unlock(&client->lock);
+
+ return 0;
+}
+
/**
* parse_opts - parse mount options into p9_fd_opts structure
* @params: options string passed from mount
static int p9_fd_open(struct p9_client *client, int rfd, int wfd)
{
- struct p9_trans_fd *ts = kmalloc(sizeof(struct p9_trans_fd),
+ struct p9_trans_fd *ts = kzalloc(sizeof(struct p9_trans_fd),
GFP_KERNEL);
if (!ts)
return -ENOMEM;
{
struct p9_trans_fd *p;
struct file *file;
- int ret;
- p = kmalloc(sizeof(struct p9_trans_fd), GFP_KERNEL);
+ p = kzalloc(sizeof(struct p9_trans_fd), GFP_KERNEL);
if (!p)
return -ENOMEM;
p->rd->f_flags |= O_NONBLOCK;
- p->conn = p9_conn_create(client);
- if (IS_ERR(p->conn)) {
- ret = PTR_ERR(p->conn);
- p->conn = NULL;
- kfree(p);
- sockfd_put(csocket);
- sockfd_put(csocket);
- return ret;
- }
+ p9_conn_create(client);
return 0;
}
/**
- * p9_mux_destroy - cancels all pending requests and frees mux resources
+ * p9_mux_destroy - cancels all pending requests of mux
* @m: mux to destroy
*
*/
p9_conn_cancel(m, -ECONNRESET);
m->client = NULL;
- kfree(m);
}
/**
client->status = Disconnected;
- p9_conn_destroy(ts->conn);
+ p9_conn_destroy(&ts->conn);
if (ts->rd)
fput(ts->rd);
return err;
p = (struct p9_trans_fd *) client->trans;
- p->conn = p9_conn_create(client);
- if (IS_ERR(p->conn)) {
- err = PTR_ERR(p->conn);
- p->conn = NULL;
- fput(p->rd);
- fput(p->wr);
- return err;
- }
+ p9_conn_create(client);
return 0;
}
.close = p9_fd_close,
.request = p9_fd_request,
.cancel = p9_fd_cancel,
+ .cancelled = p9_fd_cancelled,
.owner = THIS_MODULE,
};
.close = p9_fd_close,
.request = p9_fd_request,
.cancel = p9_fd_cancel,
+ .cancelled = p9_fd_cancelled,
.owner = THIS_MODULE,
};
.close = p9_fd_close,
.request = p9_fd_request,
.cancel = p9_fd_cancel,
+ .cancelled = p9_fd_cancelled,
.owner = THIS_MODULE,
};
if (!*p)
continue;
token = match_token(p, tokens, args);
+ if (token == Opt_err)
+ continue;
r = match_int(&args[0], &option);
if (r < 0) {
p9_debug(P9_DEBUG_ERROR,
}
req->rc = c->rc;
- req->status = REQ_STATUS_RCVD;
- p9_client_cb(client, req);
+ p9_client_cb(client, req, REQ_STATUS_RCVD);
return;
goto send_error;
}
+ /* Mark request as `sent' *before* we actually send it,
+ * because doing if after could erase the REQ_STATUS_RCVD
+ * status in case of a very fast reply.
+ */
+ req->status = REQ_STATUS_SENT;
err = ib_post_send(rdma->qp, &wr, &bad_wr);
if (err)
goto send_error;
/* Handle errors that happened during or while preparing the send: */
send_error:
+ req->status = REQ_STATUS_ERROR;
kfree(c);
p9_debug(P9_DEBUG_ERROR, "Error %d in rdma_request()\n", err);
return rdma;
}
-/* its not clear to me we can do anything after send has been posted */
static int rdma_cancel(struct p9_client *client, struct p9_req_t *req)
{
+ /* Nothing to do here.
+ * We will take care of it (if we have to) in rdma_cancelled()
+ */
return 1;
}
+/* A request has been fully flushed without a reply.
+ * That means we have posted one buffer in excess.
+ */
+static int rdma_cancelled(struct p9_client *client, struct p9_req_t *req)
+{
+ struct p9_trans_rdma *rdma = client->trans;
+ atomic_inc(&rdma->excess_rc);
+ return 0;
+}
+
/**
* trans_create_rdma - Transport method for creating atransport instance
* @client: client instance
.close = rdma_close,
.request = rdma_request,
.cancel = rdma_cancel,
+ .cancelled = rdma_cancelled,
};
/**
p9_debug(P9_DEBUG_TRANS, ": rc %p\n", rc);
p9_debug(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag);
req = p9_tag_lookup(chan->client, rc->tag);
- req->status = REQ_STATUS_RCVD;
- p9_client_cb(chan->client, req);
+ p9_client_cb(chan->client, req, REQ_STATUS_RCVD);
}
}
bool
depends on SUNRPC
-config SUNRPC_XPRT_RDMA
- tristate
- depends on SUNRPC && INFINIBAND && INFINIBAND_ADDR_TRANS
- default SUNRPC && INFINIBAND
- help
- This option allows the NFS client and server to support
- an RDMA-enabled transport.
-
- To compile RPC client RDMA transport support as a module,
- choose M here: the module will be called xprtrdma.
-
- If unsure, say N.
-
config SUNRPC_SWAP
bool
depends on SUNRPC
but makes troubleshooting NFS issues significantly harder.
If unsure, say Y.
+
+config SUNRPC_XPRT_RDMA_CLIENT
+ tristate "RPC over RDMA Client Support"
+ depends on SUNRPC && INFINIBAND && INFINIBAND_ADDR_TRANS
+ default SUNRPC && INFINIBAND
+ help
+ This option allows the NFS client to support an RDMA-enabled
+ transport.
+
+ To compile RPC client RDMA transport support as a module,
+ choose M here: the module will be called xprtrdma.
+
+ If unsure, say N.
+
+config SUNRPC_XPRT_RDMA_SERVER
+ tristate "RPC over RDMA Server Support"
+ depends on SUNRPC && INFINIBAND && INFINIBAND_ADDR_TRANS
+ default SUNRPC && INFINIBAND
+ help
+ This option allows the NFS server to support an RDMA-enabled
+ transport.
+
+ To compile RPC server RDMA transport support as a module,
+ choose M here: the module will be called svcrdma.
+
+ If unsure, say N.
obj-$(CONFIG_SUNRPC) += sunrpc.o
obj-$(CONFIG_SUNRPC_GSS) += auth_gss/
-obj-$(CONFIG_SUNRPC_XPRT_RDMA) += xprtrdma/
+
+obj-y += xprtrdma/
sunrpc-y := clnt.o xprt.o socklib.o xprtsock.o sched.o \
auth.o auth_null.o auth_unix.o auth_generic.o \
return ERR_PTR(err);
}
+struct rpc_clnt *rpc_create_xprt(struct rpc_create_args *args,
+ struct rpc_xprt *xprt)
+{
+ struct rpc_clnt *clnt = NULL;
+
+ clnt = rpc_new_client(args, xprt, NULL);
+ if (IS_ERR(clnt))
+ return clnt;
+
+ if (!(args->flags & RPC_CLNT_CREATE_NOPING)) {
+ int err = rpc_ping(clnt);
+ if (err != 0) {
+ rpc_shutdown_client(clnt);
+ return ERR_PTR(err);
+ }
+ }
+
+ clnt->cl_softrtry = 1;
+ if (args->flags & RPC_CLNT_CREATE_HARDRTRY)
+ clnt->cl_softrtry = 0;
+
+ if (args->flags & RPC_CLNT_CREATE_AUTOBIND)
+ clnt->cl_autobind = 1;
+ if (args->flags & RPC_CLNT_CREATE_DISCRTRY)
+ clnt->cl_discrtry = 1;
+ if (!(args->flags & RPC_CLNT_CREATE_QUIET))
+ clnt->cl_chatty = 1;
+
+ return clnt;
+}
+EXPORT_SYMBOL_GPL(rpc_create_xprt);
+
/**
* rpc_create - create an RPC client and transport with one call
* @args: rpc_clnt create argument structure
struct rpc_clnt *rpc_create(struct rpc_create_args *args)
{
struct rpc_xprt *xprt;
- struct rpc_clnt *clnt;
struct xprt_create xprtargs = {
.net = args->net,
.ident = args->protocol,
if (args->flags & RPC_CLNT_CREATE_NONPRIVPORT)
xprt->resvport = 0;
- clnt = rpc_new_client(args, xprt, NULL);
- if (IS_ERR(clnt))
- return clnt;
-
- if (!(args->flags & RPC_CLNT_CREATE_NOPING)) {
- int err = rpc_ping(clnt);
- if (err != 0) {
- rpc_shutdown_client(clnt);
- return ERR_PTR(err);
- }
- }
-
- clnt->cl_softrtry = 1;
- if (args->flags & RPC_CLNT_CREATE_HARDRTRY)
- clnt->cl_softrtry = 0;
-
- if (args->flags & RPC_CLNT_CREATE_AUTOBIND)
- clnt->cl_autobind = 1;
- if (args->flags & RPC_CLNT_CREATE_DISCRTRY)
- clnt->cl_discrtry = 1;
- if (!(args->flags & RPC_CLNT_CREATE_QUIET))
- clnt->cl_chatty = 1;
-
- return clnt;
+ return rpc_create_xprt(args, xprt);
}
EXPORT_SYMBOL_GPL(rpc_create);
return svsk;
}
+bool svc_alien_sock(struct net *net, int fd)
+{
+ int err;
+ struct socket *sock = sockfd_lookup(fd, &err);
+ bool ret = false;
+
+ if (!sock)
+ goto out;
+ if (sock_net(sock->sk) != net)
+ ret = true;
+ sockfd_put(sock);
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(svc_alien_sock);
+
/**
* svc_addsock - add a listener socket to an RPC service
* @serv: pointer to RPC service to which to add a new listener
}
EXPORT_SYMBOL_GPL(xdr_buf_from_iov);
-/* Sets subbuf to the portion of buf of length len beginning base bytes
- * from the start of buf. Returns -1 if base of length are out of bounds. */
+/**
+ * xdr_buf_subsegment - set subbuf to a portion of buf
+ * @buf: an xdr buffer
+ * @subbuf: the result buffer
+ * @base: beginning of range in bytes
+ * @len: length of range in bytes
+ *
+ * sets @subbuf to an xdr buffer representing the portion of @buf of
+ * length @len starting at offset @base.
+ *
+ * @buf and @subbuf may be pointers to the same struct xdr_buf.
+ *
+ * Returns -1 if base of length are out of bounds.
+ */
int
xdr_buf_subsegment(struct xdr_buf *buf, struct xdr_buf *subbuf,
unsigned int base, unsigned int len)
len -= subbuf->head[0].iov_len;
base = 0;
} else {
- subbuf->head[0].iov_base = NULL;
- subbuf->head[0].iov_len = 0;
base -= buf->head[0].iov_len;
+ subbuf->head[0].iov_len = 0;
}
if (base < buf->page_len) {
len -= subbuf->tail[0].iov_len;
base = 0;
} else {
- subbuf->tail[0].iov_base = NULL;
- subbuf->tail[0].iov_len = 0;
base -= buf->tail[0].iov_len;
+ subbuf->tail[0].iov_len = 0;
}
if (base || len)
if (atomic_dec_and_test(&xprt->count))
xprt_destroy(xprt);
}
-
-/**
- * xprt_get - return a reference to an RPC transport.
- * @xprt: pointer to the transport
- *
- */
-struct rpc_xprt *xprt_get(struct rpc_xprt *xprt)
-{
- if (atomic_inc_not_zero(&xprt->count))
- return xprt;
- return NULL;
-}
-obj-$(CONFIG_SUNRPC_XPRT_RDMA) += xprtrdma.o
+obj-$(CONFIG_SUNRPC_XPRT_RDMA_CLIENT) += xprtrdma.o
xprtrdma-y := transport.o rpc_rdma.o verbs.o
-obj-$(CONFIG_SUNRPC_XPRT_RDMA) += svcrdma.o
+obj-$(CONFIG_SUNRPC_XPRT_RDMA_SERVER) += svcrdma.o
svcrdma-y := svc_rdma.o svc_rdma_transport.o \
svc_rdma_marshal.o svc_rdma_sendto.o svc_rdma_recvfrom.o
sge_no++;
}
rqstp->rq_respages = &rqstp->rq_pages[sge_no];
+ rqstp->rq_next_page = rqstp->rq_respages + 1;
/* We should never run out of SGE because the limit is defined to
* support the max allowed RPC data length
*/
head->arg.pages[page_no] = rqstp->rq_arg.pages[page_no];
rqstp->rq_respages = &rqstp->rq_arg.pages[page_no+1];
+ rqstp->rq_next_page = rqstp->rq_respages + 1;
byte_count -= sge_bytes;
ch_bytes -= sge_bytes;
/* rq_respages points one past arg pages */
rqstp->rq_respages = &rqstp->rq_arg.pages[page_no];
+ rqstp->rq_next_page = rqstp->rq_respages + 1;
/* Create the reply and chunk maps */
offset = 0;
for (ch_no = 0; &rqstp->rq_pages[ch_no] < rqstp->rq_respages; ch_no++)
rqstp->rq_pages[ch_no] = NULL;
- /*
- * Detach res pages. If svc_release sees any it will attempt to
- * put them.
- */
- while (rqstp->rq_next_page != rqstp->rq_respages)
- *(--rqstp->rq_next_page) = NULL;
-
return err;
}
/* rq_respages starts after the last arg page */
rqstp->rq_respages = &rqstp->rq_arg.pages[page_no];
- rqstp->rq_next_page = &rqstp->rq_arg.pages[page_no];
+ rqstp->rq_next_page = rqstp->rq_respages + 1;
/* Rebuild rq_arg head and tail. */
rqstp->rq_arg.head[0] = head->arg.head[0];
xdr_off -= xdr->head[0].iov_len;
if (xdr_off < xdr->page_len) {
/* This offset is in the page list */
+ xdr_off += xdr->page_base;
page = xdr->pages[xdr_off >> PAGE_SHIFT];
xdr_off &= ~PAGE_MASK;
} else {
if (page_no+1 >= sge_no)
ctxt->sge[page_no+1].length = 0;
}
+ rqstp->rq_next_page = rqstp->rq_respages + 1;
BUG_ON(sge_no > rdma->sc_max_sge);
memset(&send_wr, 0, sizeof send_wr);
ctxt->wr_op = IB_WR_SEND;
while ((page = alloc_page(GFP_KERNEL)) == NULL) {
/* If we can't get memory, wait a bit and try again */
- printk(KERN_INFO "svcrdma: out of memory...retrying in 1000 "
- "jiffies.\n");
+ printk(KERN_INFO "svcrdma: out of memory...retrying in 1s\n");
schedule_timeout_uninterruptible(msecs_to_jiffies(1000));
}
return page;
xs_tcp_shutdown(xprt);
}
+static void xs_xprt_free(struct rpc_xprt *xprt)
+{
+ xs_free_peer_addresses(xprt);
+ xprt_free(xprt);
+}
+
/**
* xs_destroy - prepare to shutdown a transport
* @xprt: doomed transport
dprintk("RPC: xs_destroy xprt %p\n", xprt);
xs_close(xprt);
- xs_free_peer_addresses(xprt);
- xprt_free(xprt);
+ xs_xprt_free(xprt);
module_put(THIS_MODULE);
}
static void bc_destroy(struct rpc_xprt *xprt)
{
+ dprintk("RPC: bc_destroy xprt %p\n", xprt);
+
+ xs_xprt_free(xprt);
+ module_put(THIS_MODULE);
}
static struct rpc_xprt_ops xs_local_ops = {
return xprt;
ret = ERR_PTR(-EINVAL);
out_err:
- xprt_free(xprt);
+ xs_xprt_free(xprt);
return ret;
}
return xprt;
ret = ERR_PTR(-EINVAL);
out_err:
- xprt_free(xprt);
+ xs_xprt_free(xprt);
return ret;
}
xprt->address_strings[RPC_DISPLAY_ADDR],
xprt->address_strings[RPC_DISPLAY_PROTO]);
-
if (try_module_get(THIS_MODULE))
return xprt;
ret = ERR_PTR(-EINVAL);
out_err:
- xprt_free(xprt);
+ xs_xprt_free(xprt);
return ret;
}
struct svc_sock *bc_sock;
struct rpc_xprt *ret;
- if (args->bc_xprt->xpt_bc_xprt) {
- /*
- * This server connection already has a backchannel
- * transport; we can't create a new one, as we wouldn't
- * be able to match replies based on xid any more. So,
- * reuse the already-existing one:
- */
- return args->bc_xprt->xpt_bc_xprt;
- }
xprt = xs_setup_xprt(args, xprt_tcp_slot_table_entries,
xprt_tcp_slot_table_entries);
if (IS_ERR(xprt))
*/
xprt_set_connected(xprt);
-
if (try_module_get(THIS_MODULE))
return xprt;
+
+ args->bc_xprt->xpt_bc_xprt = NULL;
xprt_put(xprt);
ret = ERR_PTR(-EINVAL);
out_err:
- xprt_free(xprt);
+ xs_xprt_free(xprt);
return ret;
}
warning-1 := -Wextra -Wunused -Wno-unused-parameter
warning-1 += -Wmissing-declarations
warning-1 += -Wmissing-format-attribute
-warning-1 += -Wmissing-prototypes
+warning-1 += $(call cc-option, -Wmissing-prototypes)
warning-1 += -Wold-style-definition
warning-1 += $(call cc-option, -Wmissing-include-dirs)
warning-1 += $(call cc-option, -Wunused-but-set-variable)
warning-1 += $(call cc-disable-warning, missing-field-initializers)
+# Clang
+warning-1 += $(call cc-disable-warning, initializer-overrides)
+warning-1 += $(call cc-disable-warning, unused-value)
+warning-1 += $(call cc-disable-warning, format)
+warning-1 += $(call cc-disable-warning, unknown-warning-option)
+warning-1 += $(call cc-disable-warning, sign-compare)
+warning-1 += $(call cc-disable-warning, format-zero-length)
+warning-1 += $(call cc-disable-warning, uninitialized)
+warning-1 += $(call cc-option, -fcatch-undefined-behavior)
+
warning-2 := -Waggregate-return
warning-2 += -Wcast-align
warning-2 += -Wdisabled-optimization
echo \#define LINUX_COMPILE_BY \"`echo $LINUX_COMPILE_BY | $UTS_TRUNCATE`\"
echo \#define LINUX_COMPILE_HOST \"`echo $LINUX_COMPILE_HOST | $UTS_TRUNCATE`\"
- echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | tail -n 1`\"
+ echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | grep ' version '`\"
) > .tmpcompile
# Only replace the real compile.h if the new one is different,
int error;
int size;
- if (!inode->i_op || !inode->i_op->getxattr)
+ if (!inode->i_op->getxattr)
return -EOPNOTSUPP;
desc = init_desc(type);
if (IS_ERR(desc))
int error;
int count = 0;
- if (!inode->i_op || !inode->i_op->getxattr)
+ if (!inode->i_op->getxattr)
return -EOPNOTSUPP;
for (xattr = evm_config_xattrnames; *xattr != NULL; xattr++) {
ab = audit_log_start(current->audit_context, GFP_KERNEL, audit_msgno);
audit_log_format(ab, "pid=%d uid=%u auid=%u ses=%u",
- current->pid,
+ task_pid_nr(current),
from_kuid(&init_user_ns, current_cred()->uid),
from_kuid(&init_user_ns, audit_get_loginuid(current)),
audit_get_sessionid(current));
*/
BUILD_BUG_ON(sizeof(a->u) > sizeof(void *)*2);
- audit_log_format(ab, " pid=%d comm=", tsk->pid);
+ audit_log_format(ab, " pid=%d comm=", task_pid_nr(tsk));
audit_log_untrustedstring(ab, tsk->comm);
switch (a->type) {
}
case LSM_AUDIT_DATA_TASK:
tsk = a->u.tsk;
- if (tsk && tsk->pid) {
- audit_log_format(ab, " pid=%d comm=", tsk->pid);
- audit_log_untrustedstring(ab, tsk->comm);
+ if (tsk) {
+ pid_t pid = task_pid_nr(tsk);
+ if (pid) {
+ audit_log_format(ab, " pid=%d comm=", pid);
+ audit_log_untrustedstring(ab, tsk->comm);
+ }
}
break;
case LSM_AUDIT_DATA_NET:
* Use filesystem name if filesystem does not support rename()
* operation.
*/
- if (inode->i_op && !inode->i_op->rename)
+ if (!inode->i_op->rename)
goto prepend_filesystem_name;
}
/* Prepend device name. */
* Get local name for filesystems without rename() operation
* or dentry without vfsmount.
*/
- if (!path->mnt || (inode->i_op && !inode->i_op->rename))
+ if (!path->mnt || !inode->i_op->rename)
pos = tomoyo_get_local_path(path->dentry, buf,
buf_len - 1);
/* Get absolute name for the rest. */
kfree(device->private_data);
}
-int snd_cs8427_create(struct snd_i2c_bus *bus,
- unsigned char addr,
- unsigned int reset_timeout,
- struct snd_i2c_device **r_cs8427)
+int snd_cs8427_init(struct snd_i2c_bus *bus,
+ struct snd_i2c_device *device)
{
static unsigned char initvals1[] = {
CS8427_REG_CONTROL1 | CS8427_REG_AUTOINC,
Inhibit E->F transfers. */
CS8427_UD | CS8427_EFTUI | CS8427_DETUI,
};
+ struct cs8427 *chip = device->private_data;
int err;
- struct cs8427 *chip;
- struct snd_i2c_device *device;
unsigned char buf[24];
- if ((err = snd_i2c_device_create(bus, "CS8427",
- CS8427_ADDR | (addr & 7),
- &device)) < 0)
- return err;
- chip = device->private_data = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (chip == NULL) {
- snd_i2c_device_free(device);
- return -ENOMEM;
- }
- device->private_free = snd_cs8427_free;
-
snd_i2c_lock(bus);
err = snd_cs8427_reg_read(device, CS8427_REG_ID_AND_VER);
if (err != CS8427_VER8427A) {
snd_i2c_unlock(bus);
/* turn on run bit and rock'n'roll */
+ snd_cs8427_reset(device);
+
+ return 0;
+
+__fail:
+ snd_i2c_unlock(bus);
+
+ return err;
+}
+EXPORT_SYMBOL(snd_cs8427_init);
+
+int snd_cs8427_create(struct snd_i2c_bus *bus,
+ unsigned char addr,
+ unsigned int reset_timeout,
+ struct snd_i2c_device **r_cs8427)
+{
+ int err;
+ struct cs8427 *chip;
+ struct snd_i2c_device *device;
+
+ err = snd_i2c_device_create(bus, "CS8427", CS8427_ADDR | (addr & 7),
+ &device);
+ if (err < 0)
+ return err;
+ chip = device->private_data = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (chip == NULL) {
+ snd_i2c_device_free(device);
+ return -ENOMEM;
+ }
+ device->private_free = snd_cs8427_free;
+
if (reset_timeout < 1)
reset_timeout = 1;
chip->reset_timeout = reset_timeout;
- snd_cs8427_reset(device);
+
+ err = snd_cs8427_init(bus, device);
+ if (err)
+ goto __fail;
#if 0 // it's nice for read tests
{
return 0;
__fail:
- snd_i2c_unlock(bus);
snd_i2c_device_free(device);
return err < 0 ? err : -EIO;
}
.remove = au1000_ac97_remove,
};
-static int __init au1000_ac97_load(void)
-{
- return platform_driver_register(&au1000_ac97c_driver);
-}
-
-static void __exit au1000_ac97_unload(void)
-{
- platform_driver_unregister(&au1000_ac97c_driver);
-}
-
-module_init(au1000_ac97_load);
-module_exit(au1000_ac97_unload);
+module_platform_driver(au1000_ac97c_driver);
#include <linux/pnp.h>
#include <linux/spinlock.h>
-#define DEB(x)
-#define DEB1(x)
#include "sound_config.h"
#include "ad1848.h"
ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
- DEB(printk("ad1848_close(void)\n"));
-
devc->intr_active = 0;
ad1848_halt(dev);
},
};
-static int __init amiga_audio_init(void)
-{
- return platform_driver_probe(&amiga_audio_driver, amiga_audio_probe);
-}
-
-module_init(amiga_audio_init);
-
-static void __exit amiga_audio_exit(void)
-{
- platform_driver_unregister(&amiga_audio_driver);
-}
-
-module_exit(amiga_audio_exit);
+module_platform_driver_probe(amiga_audio_driver, amiga_audio_probe);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:amiga-audio");
devc->v_alloc->map[voice] = 0;
map = &pv_map[devc->lv_map[voice]];
- DEB(printk("Kill note %d\n", voice));
if (map->voice_mode == 0)
return 0;
map = &pv_map[devc->lv_map[voice]];
- DEB(printk("Aftertouch %d\n", voice));
-
if (map->voice_mode == 0)
return;
#include "pas2.h"
-#ifndef DEB
-#define DEB(what) /* (what) */
-#endif
-
extern int pas_translate_code;
extern char pas_model;
extern int *pas_osp;
{
int left, right, devmask, changed, i, mixer = 0;
- DEB(printk("static int pas_mixer_set(int whichDev = %d, unsigned int level = %X)\n", whichDev, level));
-
left = level & 0x7f;
right = (level & 0x7f00) >> 8;
{
int foo;
- DEB(printk("pas2_mixer.c: void pas_mixer_reset(void)\n"));
-
for (foo = 0; foo < SOUND_MIXER_NRDEVICES; foo++)
pas_mixer_set(foo, levels[foo]);
int level,v ;
int __user *p = (int __user *)arg;
- DEB(printk("pas2_mixer.c: int pas_mixer_ioctl(unsigned int cmd = %X, unsigned int arg = %X)\n", cmd, arg));
if (cmd == SOUND_MIXER_PRIVATE1) { /* Set loudness bit */
if (get_user(level, p))
return -EFAULT;
#include "pas2.h"
-#ifndef DEB
-#define DEB(WHAT)
-#endif
-
#define PAS_PCM_INTRBITS (0x08)
/*
* Sample buffer timer interrupt enable
int val, ret;
int __user *p = arg;
- DEB(printk("pas2_pcm.c: static int pas_audio_ioctl(unsigned int cmd = %X, unsigned int arg = %X)\n", cmd, arg));
-
switch (cmd)
{
case SOUND_PCM_WRITE_RATE:
static void pas_audio_reset(int dev)
{
- DEB(printk("pas2_pcm.c: static void pas_audio_reset(void)\n"));
-
pas_write(pas_read(0xF8A) & ~0x40, 0xF8A); /* Disable PCM */
}
int err;
unsigned long flags;
- DEB(printk("pas2_pcm.c: static int pas_audio_open(int mode = %X)\n", mode));
-
spin_lock_irqsave(&pas_lock, flags);
if (pcm_busy)
{
{
unsigned long flags;
- DEB(printk("pas2_pcm.c: static void pas_audio_close(void)\n"));
-
spin_lock_irqsave(&pas_lock, flags);
pas_audio_reset(dev);
{
unsigned long flags, cnt;
- DEB(printk("pas2_pcm.c: static void pas_audio_output_block(char *buf = %P, int count = %X)\n", buf, count));
-
cnt = count;
if (audio_devs[dev]->dmap_out->dma > 3)
cnt >>= 1;
unsigned long flags;
int cnt;
- DEB(printk("pas2_pcm.c: static void pas_audio_start_input(char *buf = %P, int count = %X)\n", buf, count));
-
cnt = count;
if (audio_devs[dev]->dmap_out->dma > 3)
cnt >>= 1;
void __init pas_pcm_init(struct address_info *hw_config)
{
- DEB(printk("pas2_pcm.c: long pas_pcm_init()\n"));
-
pcm_bitsok = 8;
if (pas_read(0xEF8B) & 0x08)
pcm_bitsok |= 16;
{
int loopc;
- DEB(printk("Entered sb_dsp_reset()\n"));
-
if (devc->model == MDL_ESS) return ess_dsp_reset (devc);
/* This is only for non-ESS chips */
return 0; /* Sorry */
}
- DEB(printk("sb_dsp_reset() OK\n"));
-
return 1;
}
ess_show_mixerregs (devc);
#endif
- DEB(printk("Entered ess_dsp_reset()\n"));
-
outb(3, DSP_RESET); /* Reset FIFO too */
udelay(10);
}
ess_extended (devc);
- DEB(printk("sb_dsp_reset() OK\n"));
-
#ifdef FKS_LOGGING
printk(KERN_INFO "FKS: dsp_reset 2\n");
ess_show_mixerregs (devc);
dev = dev >> 4;
- DEB(printk("sequencer_write(dev=%d, count=%d)\n", dev, count));
-
if (mode == OPEN_READ)
return -EIO;
dev = dev >> 4;
mode = translate_mode(file);
- DEB(printk("sequencer_open(dev=%d)\n", dev));
-
if (!sequencer_ok)
{
/* printk("Sound card: sequencer not initialized\n");*/
dev = dev >> 4;
- DEB(printk("sequencer_release(dev=%d)\n", dev));
-
/*
* Wait until the queue is empty (if we don't have nonblock)
*/
#include "sound_calls.h"
#include "dev_table.h"
-#ifndef DEB
-#define DEB(x)
-#endif
-
#ifndef DDB
#define DDB(x) do {} while (0)
#endif
mutex_lock(&soundcard_mutex);
- DEB(printk("sound_read(dev=%d, count=%d)\n", dev, count));
switch (dev & 0x0f) {
case SND_DEV_DSP:
case SND_DEV_DSP16:
int ret = -EINVAL;
mutex_lock(&soundcard_mutex);
- DEB(printk("sound_write(dev=%d, count=%d)\n", dev, count));
switch (dev & 0x0f) {
case SND_DEV_SEQ:
case SND_DEV_SEQ2:
int dev = iminor(inode);
int retval;
- DEB(printk("sound_open(dev=%d)\n", dev));
if ((dev >= SND_NDEVS) || (dev < 0)) {
printk(KERN_ERR "Invalid minor device %d\n", dev);
return -ENXIO;
int dev = iminor(inode);
mutex_lock(&soundcard_mutex);
- DEB(printk("sound_release(dev=%d)\n", dev));
switch (dev & 0x0f) {
case SND_DEV_CTL:
module_put(mixer_devs[dev >> 4]->owner);
if (!access_ok(VERIFY_WRITE, p, len))
return -EFAULT;
}
- DEB(printk("sound_ioctl(dev=%d, cmd=0x%x, arg=0x%x)\n", dev, cmd, arg));
if (cmd == OSS_GETVERSION)
return __put_user(SOUND_VERSION, (int __user *)p);
struct inode *inode = file_inode(file);
int dev = iminor(inode);
- DEB(printk("sound_poll(dev=%d)\n", dev));
switch (dev & 0x0f) {
case SND_DEV_SEQ:
case SND_DEV_SEQ2:
}
}
-
+ /* Flush input before enabling interrupts */
if (ok)
- {
- DEB(printk("Reset UART401 OK\n"));
- }
+ uart401_input_loop(devc);
else
DDB(printk("Reset UART401 failed - No hardware detected.\n"));
- if (ok)
- uart401_input_loop(devc); /*
- * Flush input before enabling interrupts
- */
-
return ok;
}
struct azx_dev *azx_dev = &chip->azx_dev[dev];
dsp_lock(azx_dev);
if (!azx_dev->opened && !dsp_is_locked(azx_dev)) {
- res = azx_dev;
- if (res->assigned_key == key) {
- res->opened = 1;
- res->assigned_key = key;
+ if (azx_dev->assigned_key == key) {
+ azx_dev->opened = 1;
+ azx_dev->assigned_key = key;
dsp_unlock(azx_dev);
return azx_dev;
}
+ if (!res)
+ res = azx_dev;
}
dsp_unlock(azx_dev);
}
}
/* reset codec link */
-static int azx_reset(struct azx *chip, int full_reset)
+static int azx_reset(struct azx *chip, bool full_reset)
{
if (!full_reset)
goto __skip;
/*
* reset and start the controller registers
*/
-void azx_init_chip(struct azx *chip, int full_reset)
+void azx_init_chip(struct azx *chip, bool full_reset)
{
if (chip->initialized)
return;
#ifdef CONFIG_PM_RUNTIME
if (chip->driver_caps & AZX_DCAPS_PM_RUNTIME)
- if (chip->card->dev->power.runtime_status != RPM_ACTIVE)
+ if (!pm_runtime_active(chip->card->dev))
return IRQ_NONE;
#endif
bus->in_reset = 1;
azx_stop_chip(chip);
- azx_init_chip(chip, 1);
+ azx_init_chip(chip, true);
#ifdef CONFIG_PM
if (chip->initialized) {
struct azx_pcm *p;
* get back to the sanity state.
*/
azx_stop_chip(chip);
- azx_init_chip(chip, 1);
+ azx_init_chip(chip, true);
}
}
}
void azx_free_stream_pages(struct azx *chip);
/* Low level azx interface */
-void azx_init_chip(struct azx *chip, int full_reset);
+void azx_init_chip(struct azx *chip, bool full_reset);
void azx_stop_chip(struct azx *chip);
void azx_enter_link_reset(struct azx *chip);
irqreturn_t azx_interrupt(int irq, void *dev_id);
return -EIO;
azx_init_pci(chip);
- azx_init_chip(chip, 1);
+ azx_init_chip(chip, true);
snd_hda_resume(chip->bus);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
status = azx_readw(chip, STATESTS);
azx_init_pci(chip);
- azx_init_chip(chip, 1);
+ azx_init_chip(chip, true);
bus = chip->bus;
if (status && bus) {
bool hp_pin_sense;
int val;
+ if (!spec->gen.autocfg.hp_outs) {
+ if (spec->gen.autocfg.line_out_type == AC_JACK_HP_OUT)
+ hp_pin = spec->gen.autocfg.line_out_pins[0];
+ }
+
alc283_restore_default_value(codec);
if (!hp_pin)
bool hp_pin_sense;
int val;
+ if (!spec->gen.autocfg.hp_outs) {
+ if (spec->gen.autocfg.line_out_type == AC_JACK_HP_OUT)
+ hp_pin = spec->gen.autocfg.line_out_pins[0];
+ }
+
if (!hp_pin) {
alc269_shutup(codec);
return;
if (hp_pin_sense)
msleep(100);
+ alc_auto_setup_eapd(codec, false);
snd_hda_shutup_pins(codec);
alc_write_coef_idx(codec, 0x43, 0x9614);
}
if (spec->mute_led_polarity)
enabled = !enabled;
- pinval = AC_PINCTL_IN_EN |
- (enabled ? AC_PINCTL_VREF_HIZ : AC_PINCTL_VREF_80);
+ pinval = snd_hda_codec_get_pin_target(codec, spec->mute_led_nid);
+ pinval &= ~AC_PINCTL_VREFEN;
+ pinval |= enabled ? AC_PINCTL_VREF_HIZ : AC_PINCTL_VREF_80;
if (spec->mute_led_nid)
snd_hda_set_pin_ctl_cache(codec, spec->mute_led_nid, pinval);
}
spec->gen.mixer_nid = 0;
break;
case HDA_FIXUP_ACT_INIT:
+ /* MIC2-VREF control */
+ /* Set to manual mode */
+ val = alc_read_coef_idx(codec, 0x06);
+ alc_write_coef_idx(codec, 0x06, val & ~0x000c);
/* Enable Line1 input control by verb */
val = alc_read_coef_idx(codec, 0x1a);
alc_write_coef_idx(codec, 0x1a, val | (1 << 4));
SND_PCI_QUIRK(0x1028, 0x0658, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x065f, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0662, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x0667, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0668, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0669, "Dell", ALC255_FIXUP_DELL2_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE),
{.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"},
{.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"},
{.id = ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, .name = "dell-headset-dock"},
- {.id = ALC283_FIXUP_CHROME_BOOK, .name = "alc283-chrome"},
+ {.id = ALC283_FIXUP_CHROME_BOOK, .name = "alc283-dac-wcaps"},
{.id = ALC283_FIXUP_SENSE_COMBO_JACK, .name = "alc283-sense-combo"},
{}
};
#ifdef CONFIG_PM_SLEEP
static int snd_ice1712_delta_resume(struct snd_ice1712 *ice)
{
- unsigned char akm_backup[AK4XXX_IMAGE_SIZE];
+ unsigned char akm_img_bak[AK4XXX_IMAGE_SIZE];
+ unsigned char akm_vol_bak[AK4XXX_IMAGE_SIZE];
+
+ /* init spdif */
+ switch (ice->eeprom.subvendor) {
+ case ICE1712_SUBDEVICE_AUDIOPHILE:
+ case ICE1712_SUBDEVICE_DELTA410:
+ case ICE1712_SUBDEVICE_DELTA1010E:
+ case ICE1712_SUBDEVICE_DELTA1010LT:
+ case ICE1712_SUBDEVICE_VX442:
+ case ICE1712_SUBDEVICE_DELTA66E:
+ snd_cs8427_init(ice->i2c, ice->cs8427);
+ break;
+ case ICE1712_SUBDEVICE_DELTA1010:
+ case ICE1712_SUBDEVICE_MEDIASTATION:
+ /* nothing */
+ break;
+ case ICE1712_SUBDEVICE_DELTADIO2496:
+ case ICE1712_SUBDEVICE_DELTA66:
+ /* Set spdif defaults */
+ snd_ice1712_delta_cs8403_spdif_write(ice, ice->spdif.cs8403_bits);
+ break;
+ }
+
/* init codec and restore registers */
if (ice->akm_codecs) {
- memcpy(akm_backup, ice->akm->images, sizeof(akm_backup));
+ memcpy(akm_img_bak, ice->akm->images, sizeof(akm_img_bak));
+ memcpy(akm_vol_bak, ice->akm->volumes, sizeof(akm_vol_bak));
snd_akm4xxx_init(ice->akm);
- memcpy(ice->akm->images, akm_backup, sizeof(akm_backup));
+ memcpy(ice->akm->images, akm_img_bak, sizeof(akm_img_bak));
+ memcpy(ice->akm->volumes, akm_vol_bak, sizeof(akm_vol_bak));
snd_akm4xxx_reset(ice->akm, 0);
}
if (!(snd_ice1712_read(ice, ICE1712_IREG_PBK_CTRL) & 1))
return 0;
ptr = runtime->buffer_size - inw(ice->ddma_port + 4);
+ ptr = bytes_to_frames(substream->runtime, ptr);
if (ptr == runtime->buffer_size)
ptr = 0;
- return bytes_to_frames(substream->runtime, ptr);
+ return ptr;
}
static snd_pcm_uframes_t snd_ice1712_playback_ds_pointer(struct snd_pcm_substream *substream)
addr = ICE1712_DSC_ADDR0;
ptr = snd_ice1712_ds_read(ice, substream->number * 2, addr) -
ice->playback_con_virt_addr[substream->number];
+ ptr = bytes_to_frames(substream->runtime, ptr);
if (ptr == substream->runtime->buffer_size)
ptr = 0;
- return bytes_to_frames(substream->runtime, ptr);
+ return ptr;
}
static snd_pcm_uframes_t snd_ice1712_capture_pointer(struct snd_pcm_substream *substream)
if (!(snd_ice1712_read(ice, ICE1712_IREG_CAP_CTRL) & 1))
return 0;
ptr = inl(ICEREG(ice, CONCAP_ADDR)) - ice->capture_con_virt_addr;
+ ptr = bytes_to_frames(substream->runtime, ptr);
if (ptr == substream->runtime->buffer_size)
ptr = 0;
- return bytes_to_frames(substream->runtime, ptr);
+ return ptr;
}
static const struct snd_pcm_hardware snd_ice1712_playback = {
old = inb(ICEMT(ice, RATE));
if (!force && old == val)
goto __out;
+
+ ice->cur_rate = rate;
outb(val, ICEMT(ice, RATE));
spin_unlock_irqrestore(&ice->reg_lock, flags);
if (!(inl(ICEMT(ice, PLAYBACK_CONTROL)) & ICE1712_PLAYBACK_START))
return 0;
ptr = ice->playback_pro_size - (inw(ICEMT(ice, PLAYBACK_SIZE)) << 2);
+ ptr = bytes_to_frames(substream->runtime, ptr);
if (ptr == substream->runtime->buffer_size)
ptr = 0;
- return bytes_to_frames(substream->runtime, ptr);
+ return ptr;
}
static snd_pcm_uframes_t snd_ice1712_capture_pro_pointer(struct snd_pcm_substream *substream)
if (!(inl(ICEMT(ice, PLAYBACK_CONTROL)) & ICE1712_CAPTURE_START_SHADOW))
return 0;
ptr = ice->capture_pro_size - (inw(ICEMT(ice, CAPTURE_SIZE)) << 2);
+ ptr = bytes_to_frames(substream->runtime, ptr);
if (ptr == substream->runtime->buffer_size)
ptr = 0;
- return bytes_to_frames(substream->runtime, ptr);
+ return ptr;
}
static const struct snd_pcm_hardware snd_ice1712_playback_pro = {
snd_pcm_suspend_all(ice->pcm_ds);
snd_ac97_suspend(ice->ac97);
+ spin_lock_irq(&ice->reg_lock);
+ ice->pm_saved_is_spdif_master = is_spdif_master(ice);
+ ice->pm_saved_spdif_ctrl = inw(ICEMT(ice, ROUTE_SPDOUT));
+ ice->pm_saved_route = inw(ICEMT(ice, ROUTE_PSDOUT03));
+ spin_unlock_irq(&ice->reg_lock);
+
if (ice->pm_suspend)
ice->pm_suspend(ice);
struct pci_dev *pci = to_pci_dev(dev);
struct snd_card *card = dev_get_drvdata(dev);
struct snd_ice1712 *ice = card->private_data;
+ int rate;
if (!ice->pm_suspend_enabled)
return 0;
pci_set_master(pci);
+ if (ice->cur_rate)
+ rate = ice->cur_rate;
+ else
+ rate = PRO_RATE_DEFAULT;
+
if (snd_ice1712_chip_init(ice) < 0) {
snd_card_disconnect(card);
return -EIO;
}
+ ice->cur_rate = rate;
+
if (ice->pm_resume)
ice->pm_resume(ice);
+ if (ice->pm_saved_is_spdif_master) {
+ /* switching to external clock via SPDIF */
+ spin_lock_irq(&ice->reg_lock);
+ outb(inb(ICEMT(ice, RATE)) | ICE1712_SPDIF_MASTER,
+ ICEMT(ice, RATE));
+ spin_unlock_irq(&ice->reg_lock);
+ snd_ice1712_set_input_clock_source(ice, 1);
+ } else {
+ /* internal on-card clock */
+ snd_ice1712_set_pro_rate(ice, rate, 1);
+ snd_ice1712_set_input_clock_source(ice, 0);
+ }
+
+ outw(ice->pm_saved_spdif_ctrl, ICEMT(ice, ROUTE_SPDOUT));
+ outw(ice->pm_saved_route, ICEMT(ice, ROUTE_PSDOUT03));
+
if (ice->ac97)
snd_ac97_resume(ice->ac97);
{
struct alc5623_priv *alc5623 = snd_soc_codec_get_drvdata(codec);
struct snd_soc_dapm_context *dapm = &codec->dapm;
- int ret;
alc5623_reset(codec);
return -EINVAL;
}
- return ret;
+ return 0;
}
/* power down chip */
static int alc5632_probe(struct snd_soc_codec *codec)
{
struct alc5632_priv *alc5632 = snd_soc_codec_get_drvdata(codec);
- int ret;
/* power on device */
alc5632_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return -EINVAL;
}
- return ret;
+ return 0;
}
/* power down chip */
};
MODULE_DEVICE_TABLE(i2c, alc5632_i2c_table);
+static const struct of_device_id alc5632_of_match[] = {
+ { .compatible = "realtek,alc5632", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, alc5632_of_match);
+
/* i2c codec control layer */
static struct i2c_driver alc5632_i2c_driver = {
.driver = {
.name = "alc5632",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(alc5632_of_match),
},
.probe = alc5632_i2c_probe,
.remove = alc5632_i2c_remove,
}
dev_info(&i2c_client->dev, "Cirrus Logic CS42L52, Revision: %02X\n",
- reg & 0xFF);
+ reg & CS42L52_CHIP_REV_MASK);
/* Set Platform Data */
if (cs42l52->pdata.mica_diff_cfg)
#define CS42L52_CHIP_REV_A0 0x00
#define CS42L52_CHIP_REV_A1 0x01
#define CS42L52_CHIP_REV_B0 0x02
-#define CS42L52_CHIP_REV_MASK 0x03
+#define CS42L52_CHIP_REV_MASK 0x07
#define CS42L52_PWRCTL1 0x02
#define CS42L52_PWRCTL1_PDN_ALL 0x9F
regcache_cache_bypass(cs42xx8->regmap, true);
/* Validate the chip ID */
- regmap_read(cs42xx8->regmap, CS42XX8_CHIPID, &val);
- if (val < 0) {
- dev_err(dev, "failed to get device ID: %x", val);
- ret = -EINVAL;
+ ret = regmap_read(cs42xx8->regmap, CS42XX8_CHIPID, &val);
+ if (ret < 0) {
+ dev_err(dev, "failed to get device ID, ret = %d", ret);
goto err_enable;
}
/* The top four bits of the chip ID should be 0000 */
- if ((val & CS42XX8_CHIPID_CHIP_ID_MASK) != 0x00) {
+ if (((val & CS42XX8_CHIPID_CHIP_ID_MASK) >> 4) != 0x00) {
dev_err(dev, "unmatched chip ID: %d\n",
- val & CS42XX8_CHIPID_CHIP_ID_MASK);
+ (val & CS42XX8_CHIPID_CHIP_ID_MASK) >> 4);
ret = -EINVAL;
goto err_enable;
}
}
dev_info(&i2c->dev, "Revision: %d.%d\n",
- (reg & DA732X_ID_MAJOR_MASK), (reg & DA732X_ID_MINOR_MASK));
+ (reg & DA732X_ID_MAJOR_MASK) >> 4,
+ (reg & DA732X_ID_MINOR_MASK));
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_da732x,
da732x_dai, ARRAY_SIZE(da732x_dai));
};
MODULE_DEVICE_TABLE(i2c, max98090_i2c_id);
+static const struct of_device_id max98090_of_match[] = {
+ { .compatible = "maxim,max98090", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max98090_of_match);
+
static struct i2c_driver max98090_i2c_driver = {
.driver = {
.name = "max98090",
.owner = THIS_MODULE,
.pm = &max98090_pm,
+ .of_match_table = of_match_ptr(max98090_of_match),
},
.probe = max98090_i2c_probe,
.remove = max98090_i2c_remove,
};
MODULE_DEVICE_TABLE(i2c, rt5640_i2c_id);
+#if defined(CONFIG_OF)
+static const struct of_device_id rt5640_of_match[] = {
+ { .compatible = "realtek,rt5640", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rt5640_of_match);
+#endif
+
#ifdef CONFIG_ACPI
static struct acpi_device_id rt5640_acpi_match[] = {
{ "INT33CA", 0 },
.name = "rt5640",
.owner = THIS_MODULE,
.acpi_match_table = ACPI_PTR(rt5640_acpi_match),
+ .of_match_table = of_match_ptr(rt5640_of_match),
},
.probe = rt5640_i2c_probe,
.remove = rt5640_i2c_remove,
MODULE_DEVICE_TABLE(i2c, tlv320aic23_id);
+static const struct of_device_id tlv320aic23_of_match[] = {
+ { .compatible = "ti,tlv320aic23", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tlv320aic23_of_match);
+
static struct i2c_driver tlv320aic23_i2c_driver = {
.driver = {
.name = "tlv320aic23-codec",
+ .of_match_table = of_match_ptr(tlv320aic23_of_match),
},
.probe = tlv320aic23_i2c_probe,
.remove = __exit_p(tlv320aic23_i2c_remove),
mcasp_clr_bits(mcasp, DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
mcasp_clr_bits(mcasp, DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
- mcasp_set_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_clr_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
mcasp_clr_bits(mcasp, DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
break;
mcasp_set_bits(mcasp, DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
- mcasp_clr_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_set_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
mcasp_set_bits(mcasp, DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
break;
mcasp_clr_bits(mcasp, DAVINCI_MCASP_ACLKXCTL_REG, ACLKXPOL);
mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMCTL_REG, FSXPOL);
- mcasp_set_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
+ mcasp_clr_bits(mcasp, DAVINCI_MCASP_ACLKRCTL_REG, ACLKRPOL);
mcasp_set_bits(mcasp, DAVINCI_MCASP_RXFMCTL_REG, FSRPOL);
break;
#include "fsl_sai.h"
+#define FSL_SAI_FLAGS (FSL_SAI_CSR_SEIE |\
+ FSL_SAI_CSR_FEIE)
+
+static irqreturn_t fsl_sai_isr(int irq, void *devid)
+{
+ struct fsl_sai *sai = (struct fsl_sai *)devid;
+ struct device *dev = &sai->pdev->dev;
+ u32 xcsr, mask;
+
+ /* Only handle those what we enabled */
+ mask = (FSL_SAI_FLAGS >> FSL_SAI_CSR_xIE_SHIFT) << FSL_SAI_CSR_xF_SHIFT;
+
+ /* Tx IRQ */
+ regmap_read(sai->regmap, FSL_SAI_TCSR, &xcsr);
+ xcsr &= mask;
+
+ if (xcsr & FSL_SAI_CSR_WSF)
+ dev_dbg(dev, "isr: Start of Tx word detected\n");
+
+ if (xcsr & FSL_SAI_CSR_SEF)
+ dev_warn(dev, "isr: Tx Frame sync error detected\n");
+
+ if (xcsr & FSL_SAI_CSR_FEF) {
+ dev_warn(dev, "isr: Transmit underrun detected\n");
+ /* FIFO reset for safety */
+ xcsr |= FSL_SAI_CSR_FR;
+ }
+
+ if (xcsr & FSL_SAI_CSR_FWF)
+ dev_dbg(dev, "isr: Enabled transmit FIFO is empty\n");
+
+ if (xcsr & FSL_SAI_CSR_FRF)
+ dev_dbg(dev, "isr: Transmit FIFO watermark has been reached\n");
+
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR,
+ FSL_SAI_CSR_xF_W_MASK | FSL_SAI_CSR_FR, xcsr);
+
+ /* Rx IRQ */
+ regmap_read(sai->regmap, FSL_SAI_RCSR, &xcsr);
+ xcsr &= mask;
+
+ if (xcsr & FSL_SAI_CSR_WSF)
+ dev_dbg(dev, "isr: Start of Rx word detected\n");
+
+ if (xcsr & FSL_SAI_CSR_SEF)
+ dev_warn(dev, "isr: Rx Frame sync error detected\n");
+
+ if (xcsr & FSL_SAI_CSR_FEF) {
+ dev_warn(dev, "isr: Receive overflow detected\n");
+ /* FIFO reset for safety */
+ xcsr |= FSL_SAI_CSR_FR;
+ }
+
+ if (xcsr & FSL_SAI_CSR_FWF)
+ dev_dbg(dev, "isr: Enabled receive FIFO is full\n");
+
+ if (xcsr & FSL_SAI_CSR_FRF)
+ dev_dbg(dev, "isr: Receive FIFO watermark has been reached\n");
+
+ regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
+ FSL_SAI_CSR_xF_W_MASK | FSL_SAI_CSR_FR, xcsr);
+
+ return IRQ_HANDLED;
+}
+
static int fsl_sai_set_dai_sysclk_tr(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int fsl_dir)
{
* that is, together with the last bit of the previous
* data word.
*/
- val_cr2 &= ~FSL_SAI_CR2_BCP;
+ val_cr2 |= FSL_SAI_CR2_BCP;
val_cr4 |= FSL_SAI_CR4_FSE | FSL_SAI_CR4_FSP;
break;
case SND_SOC_DAIFMT_LEFT_J:
* Frame high, one word length for frame sync,
* frame sync asserts with the first bit of the frame.
*/
- val_cr2 &= ~FSL_SAI_CR2_BCP;
+ val_cr2 |= FSL_SAI_CR2_BCP;
val_cr4 &= ~(FSL_SAI_CR4_FSE | FSL_SAI_CR4_FSP);
break;
case SND_SOC_DAIFMT_DSP_A:
* that is, together with the last bit of the previous
* data word.
*/
- val_cr2 &= ~FSL_SAI_CR2_BCP;
+ val_cr2 |= FSL_SAI_CR2_BCP;
val_cr4 &= ~FSL_SAI_CR4_FSP;
val_cr4 |= FSL_SAI_CR4_FSE;
sai->is_dsp_mode = true;
* Frame high, one bit for frame sync,
* frame sync asserts with the first bit of the frame.
*/
- val_cr2 &= ~FSL_SAI_CR2_BCP;
+ val_cr2 |= FSL_SAI_CR2_BCP;
val_cr4 &= ~(FSL_SAI_CR4_FSE | FSL_SAI_CR4_FSP);
sai->is_dsp_mode = true;
break;
{
struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
- regmap_update_bits(sai->regmap, FSL_SAI_TCSR, 0xffffffff, 0x0);
- regmap_update_bits(sai->regmap, FSL_SAI_RCSR, 0xffffffff, 0x0);
+ regmap_update_bits(sai->regmap, FSL_SAI_TCSR, 0xffffffff, FSL_SAI_FLAGS);
+ regmap_update_bits(sai->regmap, FSL_SAI_RCSR, 0xffffffff, FSL_SAI_FLAGS);
regmap_update_bits(sai->regmap, FSL_SAI_TCR1, FSL_SAI_CR1_RFW_MASK,
FSL_SAI_MAXBURST_TX * 2);
regmap_update_bits(sai->regmap, FSL_SAI_RCR1, FSL_SAI_CR1_RFW_MASK,
struct fsl_sai *sai;
struct resource *res;
void __iomem *base;
- int ret;
+ int irq, ret;
sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
if (!sai)
return -ENOMEM;
+ sai->pdev = pdev;
+
sai->big_endian_regs = of_property_read_bool(np, "big-endian-regs");
if (sai->big_endian_regs)
fsl_sai_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
return PTR_ERR(sai->regmap);
}
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq for node %s\n", np->full_name);
+ return irq;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, fsl_sai_isr, 0, np->name, sai);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to claim irq %u\n", irq);
+ return ret;
+ }
+
sai->dma_params_rx.addr = res->start + FSL_SAI_RDR;
sai->dma_params_tx.addr = res->start + FSL_SAI_TDR;
sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
/* SAI Transmit/Recieve Control Register */
#define FSL_SAI_CSR_TERE BIT(31)
+#define FSL_SAI_CSR_FR BIT(25)
+#define FSL_SAI_CSR_xF_SHIFT 16
+#define FSL_SAI_CSR_xF_W_SHIFT 18
+#define FSL_SAI_CSR_xF_MASK (0x1f << FSL_SAI_CSR_xF_SHIFT)
+#define FSL_SAI_CSR_xF_W_MASK (0x7 << FSL_SAI_CSR_xF_W_SHIFT)
+#define FSL_SAI_CSR_WSF BIT(20)
+#define FSL_SAI_CSR_SEF BIT(19)
+#define FSL_SAI_CSR_FEF BIT(18)
#define FSL_SAI_CSR_FWF BIT(17)
+#define FSL_SAI_CSR_FRF BIT(16)
+#define FSL_SAI_CSR_xIE_SHIFT 8
+#define FSL_SAI_CSR_WSIE BIT(12)
+#define FSL_SAI_CSR_SEIE BIT(11)
+#define FSL_SAI_CSR_FEIE BIT(10)
+#define FSL_SAI_CSR_FWIE BIT(9)
#define FSL_SAI_CSR_FRIE BIT(8)
#define FSL_SAI_CSR_FRDE BIT(0)
#define FSL_SAI_MAXBURST_RX 6
struct fsl_sai {
+ struct platform_device *pdev;
struct regmap *regmap;
bool big_endian_regs;
};
static struct s3c_ac97_info s3c_ac97;
-static struct s3c2410_dma_client s3c_dma_client_out = {
+static struct s3c_dma_client s3c_dma_client_out = {
.name = "AC97 PCMOut"
};
-static struct s3c2410_dma_client s3c_dma_client_in = {
+static struct s3c_dma_client s3c_dma_client_in = {
.name = "AC97 PCMIn"
};
-static struct s3c2410_dma_client s3c_dma_client_micin = {
+static struct s3c_dma_client s3c_dma_client_micin = {
.name = "AC97 MicIn"
};
#include <sound/dmaengine_pcm.h>
+struct s3c_dma_client {
+ char *name;
+};
+
struct s3c_dma_params {
- struct s3c2410_dma_client *client; /* stream identifier */
+ struct s3c_dma_client *client; /* stream identifier */
int channel; /* Channel ID */
dma_addr_t dma_addr;
int dma_size; /* Size of the DMA transfer */
pri_dai->dma_playback.dma_addr = regs_base + I2STXD;
pri_dai->dma_capture.dma_addr = regs_base + I2SRXD;
pri_dai->dma_playback.client =
- (struct s3c2410_dma_client *)&pri_dai->dma_playback;
+ (struct s3c_dma_client *)&pri_dai->dma_playback;
pri_dai->dma_playback.ch_name = "tx";
pri_dai->dma_capture.client =
- (struct s3c2410_dma_client *)&pri_dai->dma_capture;
+ (struct s3c_dma_client *)&pri_dai->dma_capture;
pri_dai->dma_capture.ch_name = "rx";
pri_dai->dma_playback.dma_size = 4;
pri_dai->dma_capture.dma_size = 4;
}
sec_dai->dma_playback.dma_addr = regs_base + I2STXDS;
sec_dai->dma_playback.client =
- (struct s3c2410_dma_client *)&sec_dai->dma_playback;
+ (struct s3c_dma_client *)&sec_dai->dma_playback;
sec_dai->dma_playback.ch_name = "tx-sec";
if (!np) {
#include <sound/pcm_params.h>
#include <linux/platform_data/asoc-s3c.h>
-#include <mach/dma.h>
#include "dma.h"
#include "pcm.h"
struct s3c_dma_params *dma_capture;
};
-static struct s3c2410_dma_client s3c_pcm_dma_client_out = {
+static struct s3c_dma_client s3c_pcm_dma_client_out = {
.name = "PCM Stereo out"
};
-static struct s3c2410_dma_client s3c_pcm_dma_client_in = {
+static struct s3c_dma_client s3c_pcm_dma_client_in = {
.name = "PCM Stereo in"
};
#include "regs-i2s-v2.h"
#include "s3c2412-i2s.h"
-static struct s3c2410_dma_client s3c2412_dma_client_out = {
+static struct s3c_dma_client s3c2412_dma_client_out = {
.name = "I2S PCM Stereo out"
};
-static struct s3c2410_dma_client s3c2412_dma_client_in = {
+static struct s3c_dma_client s3c2412_dma_client_in = {
.name = "I2S PCM Stereo in"
};
#include "dma.h"
#include "s3c24xx-i2s.h"
-static struct s3c2410_dma_client s3c24xx_dma_client_out = {
+static struct s3c_dma_client s3c24xx_dma_client_out = {
.name = "I2S PCM Stereo out"
};
-static struct s3c2410_dma_client s3c24xx_dma_client_in = {
+static struct s3c_dma_client s3c24xx_dma_client_in = {
.name = "I2S PCM Stereo in"
};
#include <sound/pcm_params.h>
#include <linux/platform_data/asoc-s3c.h>
-#include <mach/dma.h>
#include "dma.h"
#include "spdif.h"
struct s3c_dma_params *dma_playback;
};
-static struct s3c2410_dma_client spdif_dma_client_out = {
+static struct s3c_dma_client spdif_dma_client_out = {
.name = "S/PDIF Stereo out",
};
* The error should be lower than 2ms since the estimate relies
* on two reads of a counter updated every ms.
*/
- if (abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
+ if (printk_ratelimit() &&
+ abs(est_delay - subs->last_delay) * 1000 > runtime->rate * 2)
dev_dbg(&subs->dev->dev,
"delay: estimated %d, actual %d\n",
est_delay, subs->last_delay);
.PP
.SH FIELD DESCRIPTIONS
.nf
-\fBpk\fP processor package number.
-\fBcor\fP processor core number.
+\fBPackage\fP processor package number.
+\fBCore\fP processor core number.
\fBCPU\fP Linux CPU (logical processor) number.
Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology.
-\fB%c0\fP percent of the interval that the CPU retired instructions.
-\fBGHz\fP average clock rate while the CPU was in c0 state.
-\fBTSC\fP average GHz that the TSC ran during the entire interval.
-\fB%c1, %c3, %c6, %c7\fP show the percentage residency in hardware core idle states.
-\fBCTMP\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
-\fBPTMP\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
-\fB%pc2, %pc3, %pc6, %pc7\fP percentage residency in hardware package idle states.
-\fBPkg_W\fP Watts consumed by the whole package.
-\fBCor_W\fP Watts consumed by the core part of the package.
-\fBGFX_W\fP Watts consumed by the Graphics part of the package -- available only on client processors.
-\fBRAM_W\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
+\fBAVG_MHz\fP number of cycles executed divided by time elapsed.
+\fB%Buzy\fP percent of the interval that the CPU retired instructions, aka. % of time in "C0" state.
+\fBBzy_MHz\fP average clock rate while the CPU was busy (in "c0" state).
+\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
+\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states.
+\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor.
+\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor.
+\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states.
+\fBPkgWatt\fP Watts consumed by the whole package.
+\fBCorWatt\fP Watts consumed by the core part of the package.
+\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors.
+\fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.
\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
.fi
Subsequent rows show per-CPU statistics.
.nf
-[root@sandy]# ./turbostat
-cor CPU %c0 GHz TSC %c1 %c3 %c6 %c7 CTMP PTMP %pc2 %pc3 %pc6 %pc7 Pkg_W Cor_W GFX_W
- 0.06 0.80 2.29 0.11 0.00 0.00 99.83 47 40 0.26 0.01 0.44 98.78 3.49 0.12 0.14
- 0 0 0.07 0.80 2.29 0.07 0.00 0.00 99.86 40 40 0.26 0.01 0.44 98.78 3.49 0.12 0.14
- 0 4 0.03 0.80 2.29 0.12
- 1 1 0.04 0.80 2.29 0.25 0.01 0.00 99.71 40
- 1 5 0.16 0.80 2.29 0.13
- 2 2 0.05 0.80 2.29 0.06 0.01 0.00 99.88 40
- 2 6 0.03 0.80 2.29 0.08
- 3 3 0.05 0.80 2.29 0.08 0.00 0.00 99.87 47
- 3 7 0.04 0.84 2.29 0.09
-.fi
-.SH SUMMARY EXAMPLE
-The "-s" option prints the column headers just once,
-and then the one line system summary for each sample interval.
-
-.nf
-[root@wsm]# turbostat -S
- %c0 GHz TSC %c1 %c3 %c6 CTMP %pc3 %pc6
- 1.40 2.81 3.38 10.78 43.47 44.35 42 13.67 2.09
- 1.34 2.90 3.38 11.48 58.96 28.23 41 19.89 0.15
- 1.55 2.72 3.38 26.73 37.66 34.07 42 2.53 2.80
- 1.37 2.83 3.38 16.95 60.05 21.63 42 5.76 0.20
+[root@ivy]# ./turbostat
+ Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ - - 6 0.36 1596 3492 0 0.59 0.01 99.04 0.00 23 24 23.82 0.01 72.47 0.00 6.40 1.01 0.00
+ 0 0 9 0.58 1596 3492 0 0.28 0.01 99.13 0.00 23 24 23.82 0.01 72.47 0.00 6.40 1.01 0.00
+ 0 4 1 0.07 1596 3492 0 0.79
+ 1 1 10 0.65 1596 3492 0 0.59 0.00 98.76 0.00 23
+ 1 5 5 0.28 1596 3492 0 0.95
+ 2 2 10 0.66 1596 3492 0 0.41 0.01 98.92 0.00 23
+ 2 6 2 0.10 1597 3492 0 0.97
+ 3 3 3 0.20 1596 3492 0 0.44 0.00 99.37 0.00 23
+ 3 7 5 0.31 1596 3492 0 0.33
.fi
.SH VERBOSE EXAMPLE
The "-v" option adds verbosity to the output:
until ^C while the other CPUs are mostly idle:
.nf
-[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
+root@ivy: turbostat cat /dev/zero > /dev/null
^C
-cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 8.86 3.61 3.38 15.06 31.19 44.89 0.00 0.00
- 0 0 1.46 3.22 3.38 16.84 29.48 52.22 0.00 0.00
- 0 6 0.21 3.06 3.38 18.09
- 1 2 0.53 3.33 3.38 2.80 46.40 50.27
- 1 8 0.89 3.47 3.38 2.44
- 2 4 1.36 3.43 3.38 9.04 23.71 65.89
- 2 10 0.18 2.86 3.38 10.22
- 8 1 0.04 2.87 3.38 99.96 0.01 0.00
- 8 7 99.72 3.63 3.38 0.27
- 9 3 0.31 3.21 3.38 7.64 56.55 35.50
- 9 9 0.08 2.95 3.38 7.88
- 10 5 1.42 3.43 3.38 2.14 30.99 65.44
- 10 11 0.16 2.88 3.38 3.40
+ Core CPU Avg_MHz %Busy Bzy_MHz TSC_MHz SMI CPU%c1 CPU%c3 CPU%c6 CPU%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ - - 496 12.75 3886 3492 0 13.16 0.04 74.04 0.00 36 36 0.00 0.00 0.00 0.00 23.15 17.65 0.00
+ 0 0 22 0.57 3830 3492 0 0.83 0.02 98.59 0.00 27 36 0.00 0.00 0.00 0.00 23.15 17.65 0.00
+ 0 4 9 0.24 3829 3492 0 1.15
+ 1 1 4 0.09 3783 3492 0 99.91 0.00 0.00 0.00 36
+ 1 5 3880 99.82 3888 3492 0 0.18
+ 2 2 17 0.44 3813 3492 0 0.77 0.04 98.75 0.00 28
+ 2 6 12 0.32 3823 3492 0 0.89
+ 3 3 16 0.43 3844 3492 0 0.63 0.11 98.84 0.00 30
+ 3 7 4 0.11 3827 3492 0 0.94
+30.372243 sec
+
.fi
-Above the cycle soaker drives cpu7 up its 3.6 GHz turbo limit
+Above the cycle soaker drives cpu5 up its 3.8 GHz turbo limit
while the other processors are generally in various states of idle.
-Note that cpu1 and cpu7 are HT siblings within core8.
-As cpu7 is very busy, it prevents its sibling, cpu1,
+Note that cpu1 and cpu5 are HT siblings within core1.
+As cpu5 is very busy, it prevents its sibling, cpu1,
from entering a c-state deeper than c1.
-Note that turbostat reports average GHz of 3.63, while
-the arithmetic average of the GHz column above is lower.
-This is a weighted average, where the weight is %c0. ie. it is the total number of
-un-halted cycles elapsed per time divided by the number of CPUs.
-.SH SMI COUNTING EXAMPLE
-On Intel Nehalem and newer processors, MSR 0x34 is a System Management Mode Interrupt (SMI) counter.
-This counter is shown by default under the "SMI" column.
-.nf
-[root@x980 ~]# turbostat
-cor CPU %c0 GHz TSC SMI %c1 %c3 %c6 CTMP %pc3 %pc6
- 0.11 1.91 3.38 0 1.84 0.26 97.79 29 0.82 83.87
- 0 0 0.40 1.63 3.38 0 10.27 0.12 89.20 20 0.82 83.88
- 0 6 0.06 1.63 3.38 0 10.61
- 1 2 0.37 2.63 3.38 0 0.02 0.10 99.51 22
- 1 8 0.01 1.62 3.38 0 0.39
- 2 4 0.07 1.62 3.38 0 0.04 0.07 99.82 23
- 2 10 0.02 1.62 3.38 0 0.09
- 8 1 0.23 1.64 3.38 0 0.10 1.07 98.60 24
- 8 7 0.02 1.64 3.38 0 0.31
- 9 3 0.03 1.62 3.38 0 0.03 0.05 99.89 29
- 9 9 0.02 1.62 3.38 0 0.05
- 10 5 0.07 1.62 3.38 0 0.08 0.12 99.73 27
- 10 11 0.03 1.62 3.38 0 0.13
-^C
-.fi
+Note that the Avg_MHz column reflects the total number of cycles executed
+divided by the measurement interval. If the %Busy column is 100%,
+then the processor was running at that speed the entire interval.
+The Avg_MHz multiplied by the %Busy results in the Bzy_MHz --
+which is the average frequency while the processor was executing --
+not including any non-busy idle time.
+
.SH NOTES
.B "turbostat "
unsigned int use_c1_residency_msr;
unsigned int has_aperf;
unsigned int has_epb;
-unsigned int units = 1000000000; /* Ghz etc */
+unsigned int units = 1000000; /* MHz etc */
unsigned int genuine_intel;
unsigned int has_invariant_tsc;
unsigned int do_nehalem_platform_info;
return 0;
}
+/*
+ * Example Format w/ field column widths:
+ *
+ * Package Core CPU Avg_MHz Bzy_MHz TSC_MHz SMI %Busy CPU_%c1 CPU_%c3 CPU_%c6 CPU_%c7 CoreTmp PkgTmp Pkg%pc2 Pkg%pc3 Pkg%pc6 Pkg%pc7 PkgWatt CorWatt GFXWatt
+ * 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567 1234567
+ */
+
void print_header(void)
{
if (show_pkg)
- outp += sprintf(outp, "pk");
- if (show_pkg)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, "Package ");
if (show_core)
- outp += sprintf(outp, "cor");
+ outp += sprintf(outp, " Core ");
if (show_cpu)
- outp += sprintf(outp, " CPU");
- if (show_pkg || show_core || show_cpu)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " CPU ");
+ if (has_aperf)
+ outp += sprintf(outp, "Avg_MHz ");
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c0");
+ outp += sprintf(outp, " %%Busy ");
if (has_aperf)
- outp += sprintf(outp, " GHz");
- outp += sprintf(outp, " TSC");
+ outp += sprintf(outp, "Bzy_MHz ");
+ outp += sprintf(outp, "TSC_MHz ");
if (do_smi)
- outp += sprintf(outp, " SMI");
+ outp += sprintf(outp, " SMI ");
if (extra_delta_offset32)
- outp += sprintf(outp, " count 0x%03X", extra_delta_offset32);
+ outp += sprintf(outp, " count 0x%03X ", extra_delta_offset32);
if (extra_delta_offset64)
- outp += sprintf(outp, " COUNT 0x%03X", extra_delta_offset64);
+ outp += sprintf(outp, " COUNT 0x%03X ", extra_delta_offset64);
if (extra_msr_offset32)
- outp += sprintf(outp, " MSR 0x%03X", extra_msr_offset32);
+ outp += sprintf(outp, " MSR 0x%03X ", extra_msr_offset32);
if (extra_msr_offset64)
- outp += sprintf(outp, " MSR 0x%03X", extra_msr_offset64);
+ outp += sprintf(outp, " MSR 0x%03X ", extra_msr_offset64);
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c1");
+ outp += sprintf(outp, " CPU%%c1 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%c3");
+ outp += sprintf(outp, " CPU%%c3 ");
if (do_nhm_cstates)
- outp += sprintf(outp, " %%c6");
+ outp += sprintf(outp, " CPU%%c6 ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%c7");
+ outp += sprintf(outp, " CPU%%c7 ");
if (do_dts)
- outp += sprintf(outp, " CTMP");
+ outp += sprintf(outp, "CoreTmp ");
if (do_ptm)
- outp += sprintf(outp, " PTMP");
+ outp += sprintf(outp, " PkgTmp ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%pc2");
+ outp += sprintf(outp, "Pkg%%pc2 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%pc3");
+ outp += sprintf(outp, "Pkg%%pc3 ");
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %%pc6");
+ outp += sprintf(outp, "Pkg%%pc6 ");
if (do_snb_cstates)
- outp += sprintf(outp, " %%pc7");
+ outp += sprintf(outp, "Pkg%%pc7 ");
if (do_c8_c9_c10) {
- outp += sprintf(outp, " %%pc8");
- outp += sprintf(outp, " %%pc9");
- outp += sprintf(outp, " %%pc10");
+ outp += sprintf(outp, "Pkg%%pc8 ");
+ outp += sprintf(outp, "Pkg%%pc9 ");
+ outp += sprintf(outp, "Pk%%pc10 ");
}
if (do_rapl && !rapl_joules) {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, " Pkg_W");
+ outp += sprintf(outp, "PkgWatt ");
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, " Cor_W");
+ outp += sprintf(outp, "CorWatt ");
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, " GFX_W");
+ outp += sprintf(outp, "GFXWatt ");
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, " RAM_W");
+ outp += sprintf(outp, "RAMWatt ");
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, " PKG_%%");
+ outp += sprintf(outp, " PKG_%% ");
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, " RAM_%%");
+ outp += sprintf(outp, " RAM_%% ");
} else {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, " Pkg_J");
+ outp += sprintf(outp, " Pkg_J ");
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, " Cor_J");
+ outp += sprintf(outp, " Cor_J ");
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, " GFX_J");
+ outp += sprintf(outp, " GFX_J ");
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, " RAM_W");
+ outp += sprintf(outp, " RAM_W ");
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, " PKG_%%");
+ outp += sprintf(outp, " PKG_%% ");
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, " RAM_%%");
- outp += sprintf(outp, " time");
+ outp += sprintf(outp, " RAM_%% ");
+ outp += sprintf(outp, " time ");
}
outp += sprintf(outp, "\n");
/*
* column formatting convention & formats
- * package: "pk" 2 columns %2d
- * core: "cor" 3 columns %3d
- * CPU: "CPU" 3 columns %3d
- * Pkg_W: %6.2
- * Cor_W: %6.2
- * GFX_W: %5.2
- * RAM_W: %5.2
- * GHz: "GHz" 3 columns %3.2
- * TSC: "TSC" 3 columns %3.2
- * SMI: "SMI" 4 columns %4d
- * percentage " %pc3" %6.2
- * Perf Status percentage: %5.2
- * "CTMP" 4 columns %4d
*/
int format_counters(struct thread_data *t, struct core_data *c,
struct pkg_data *p)
{
double interval_float;
- char *fmt5, *fmt6;
+ char *fmt8;
/* if showing only 1st thread in core and this isn't one, bail out */
if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
/* topo columns, print blanks on 1st (average) line */
if (t == &average.threads) {
if (show_pkg)
- outp += sprintf(outp, " ");
- if (show_pkg && show_core)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
if (show_core)
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
if (show_cpu)
- outp += sprintf(outp, " " " ");
+ outp += sprintf(outp, " -");
} else {
if (show_pkg) {
if (p)
- outp += sprintf(outp, "%2d", p->package_id);
+ outp += sprintf(outp, "%8d", p->package_id);
else
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
}
- if (show_pkg && show_core)
- outp += sprintf(outp, " ");
if (show_core) {
if (c)
- outp += sprintf(outp, "%3d", c->core_id);
+ outp += sprintf(outp, "%8d", c->core_id);
else
- outp += sprintf(outp, " ");
+ outp += sprintf(outp, " -");
}
if (show_cpu)
- outp += sprintf(outp, " %3d", t->cpu_id);
+ outp += sprintf(outp, "%8d", t->cpu_id);
}
+
+ /* AvgMHz */
+ if (has_aperf)
+ outp += sprintf(outp, "%8.0f",
+ 1.0 / units * t->aperf / interval_float);
+
/* %c0 */
if (do_nhm_cstates) {
- if (show_pkg || show_core || show_cpu)
- outp += sprintf(outp, " ");
if (!skip_c0)
- outp += sprintf(outp, "%6.2f", 100.0 * t->mperf/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * t->mperf/t->tsc);
else
- outp += sprintf(outp, " ****");
+ outp += sprintf(outp, "********");
}
- /* GHz */
- if (has_aperf) {
- if (!aperf_mperf_unstable) {
- outp += sprintf(outp, " %3.2f",
- 1.0 * t->tsc / units * t->aperf /
- t->mperf / interval_float);
- } else {
- if (t->aperf > t->tsc || t->mperf > t->tsc) {
- outp += sprintf(outp, " ***");
- } else {
- outp += sprintf(outp, "%3.1f*",
- 1.0 * t->tsc /
- units * t->aperf /
- t->mperf / interval_float);
- }
- }
- }
+ /* BzyMHz */
+ if (has_aperf)
+ outp += sprintf(outp, "%8.0f",
+ 1.0 * t->tsc / units * t->aperf / t->mperf / interval_float);
/* TSC */
- outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
+ outp += sprintf(outp, "%8.0f", 1.0 * t->tsc/units/interval_float);
/* SMI */
if (do_smi)
- outp += sprintf(outp, "%4d", t->smi_count);
+ outp += sprintf(outp, "%8d", t->smi_count);
/* delta */
if (extra_delta_offset32)
if (do_nhm_cstates) {
if (!skip_c1)
- outp += sprintf(outp, " %6.2f", 100.0 * t->c1/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * t->c1/t->tsc);
else
- outp += sprintf(outp, " ****");
+ outp += sprintf(outp, "********");
}
/* print per-core data only for 1st thread in core */
goto done;
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c3/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c3/t->tsc);
if (do_nhm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c6/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c6/t->tsc);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * c->c7/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * c->c7/t->tsc);
if (do_dts)
- outp += sprintf(outp, " %4d", c->core_temp_c);
+ outp += sprintf(outp, "%8d", c->core_temp_c);
/* print per-package data only for 1st core in package */
if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
goto done;
if (do_ptm)
- outp += sprintf(outp, " %4d", p->pkg_temp_c);
+ outp += sprintf(outp, "%8d", p->pkg_temp_c);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc2/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc2/t->tsc);
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc3/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc3/t->tsc);
if (do_nhm_cstates && !do_slm_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc6/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc6/t->tsc);
if (do_snb_cstates)
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc7/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc7/t->tsc);
if (do_c8_c9_c10) {
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc8/t->tsc);
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc9/t->tsc);
- outp += sprintf(outp, " %6.2f", 100.0 * p->pc10/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc8/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc9/t->tsc);
+ outp += sprintf(outp, "%8.2f", 100.0 * p->pc10/t->tsc);
}
/*
* If measurement interval exceeds minimum RAPL Joule Counter range,
* indicate that results are suspect by printing "**" in fraction place.
*/
- if (interval_float < rapl_joule_counter_range) {
- fmt5 = " %5.2f";
- fmt6 = " %6.2f";
- } else {
- fmt5 = " %3.0f**";
- fmt6 = " %4.0f**";
- }
+ if (interval_float < rapl_joule_counter_range)
+ fmt8 = "%8.2f";
+ else
+ fmt8 = " %6.0f**";
if (do_rapl && !rapl_joules) {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, fmt6, p->energy_pkg * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_pkg * rapl_energy_units / interval_float);
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, fmt6, p->energy_cores * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_cores * rapl_energy_units / interval_float);
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, fmt5, p->energy_gfx * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_gfx * rapl_energy_units / interval_float);
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, fmt5, p->energy_dram * rapl_energy_units / interval_float);
+ outp += sprintf(outp, fmt8, p->energy_dram * rapl_energy_units / interval_float);
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
} else {
if (do_rapl & RAPL_PKG)
- outp += sprintf(outp, fmt6,
+ outp += sprintf(outp, fmt8,
p->energy_pkg * rapl_energy_units);
if (do_rapl & RAPL_CORES)
- outp += sprintf(outp, fmt6,
+ outp += sprintf(outp, fmt8,
p->energy_cores * rapl_energy_units);
if (do_rapl & RAPL_GFX)
- outp += sprintf(outp, fmt5,
+ outp += sprintf(outp, fmt8,
p->energy_gfx * rapl_energy_units);
if (do_rapl & RAPL_DRAM)
- outp += sprintf(outp, fmt5,
+ outp += sprintf(outp, fmt8,
p->energy_dram * rapl_energy_units);
if (do_rapl & RAPL_PKG_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float);
if (do_rapl & RAPL_DRAM_PERF_STATUS)
- outp += sprintf(outp, fmt5, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
- outp += sprintf(outp, fmt5, interval_float);
+ outp += sprintf(outp, fmt8, 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float);
+ outp += sprintf(outp, fmt8, interval_float);
}
done:
case 0x46: /* HSW */
case 0x37: /* BYT */
case 0x4D: /* AVN */
+ case 0x3D: /* BDW */
+ case 0x4F: /* BDX */
+ case 0x56: /* BDX-DE */
return 1;
case 0x2E: /* Nehalem-EX Xeon - Beckton */
case 0x2F: /* Westmere-EX Xeon - Eagleton */
case 0x3C: /* HSW */
case 0x45: /* HSW */
case 0x46: /* HSW */
+ case 0x3D: /* BDW */
do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_GFX | RAPL_PKG_POWER_INFO;
break;
case 0x3F: /* HSX */
+ case 0x4F: /* BDX */
+ case 0x56: /* BDX-DE */
do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO;
break;
case 0x2D:
case 0x3F: /* HSW */
case 0x45: /* HSW */
case 0x46: /* HSW */
+ case 0x3D: /* BDW */
+ case 0x4F: /* BDX */
+ case 0x56: /* BDX-DE */
return 1;
}
return 0;
return 0;
switch (model) {
- case 0x45:
+ case 0x45: /* HSW */
+ case 0x3D: /* BDW */
return 1;
}
return 0;
cmdline(argc, argv);
if (verbose)
- fprintf(stderr, "turbostat v3.6 Dec 2, 2013"
+ fprintf(stderr, "turbostat v3.7 Feb 6, 2014"
" - Len Brown <lenb@kernel.org>\n");
turbostat_init();
host_vtimer_irq = ppi;
- err = register_cpu_notifier(&kvm_timer_cpu_nb);
+ err = __register_cpu_notifier(&kvm_timer_cpu_nb);
if (err) {
kvm_err("Cannot register timer CPU notifier\n");
goto out_free;
goto out;
}
- ret = register_cpu_notifier(&vgic_cpu_nb);
+ ret = __register_cpu_notifier(&vgic_cpu_nb);
if (ret) {
kvm_err("Cannot register vgic CPU notifier\n");
goto out_free_irq;