pub ascq: u8,
}
-impl ToString for SenseInfo {
-
- fn to_string(&self) -> String {
-
- // Added codes from IBM TS4300 Tape Library SCSI reference manual
- // Added codes from Quantum Intelligent Libraries SCSI Reference Guide
- match (self.sense_key, self.asc, self.ascq) {
- (0x00, asc, ascq) => format!("no sense, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
- (0x01, asc, ascq) => format!("recevered error, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
- // Not Ready
- (0x02, 0x04, 0x00) => String::from("Not ready, cause not reportable"),
- (0x02, 0x04, 0x01) => String::from("Not ready, operation in progress"),
- (0x02, 0x04, 0x03) => String::from("Not ready, manual intervention required"),
- (0x02, 0x04, 0x12) => String::from("Not ready, offline"),
- (0x02, 0x04, 0x83) => String::from("The library is not ready due to aisle power being disabled"),
- (0x02, 0x04, 0x8D) => String::from(" The library is not ready because it is offline"),
- (0x02, 0x3B, 0x12) => String::from("Not ready, magazine removed"),
- (0x02, asc, ascq) => format!("not ready, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
- // Media Error
- (0x03, 0x30, 0x00) => String::from("Media error"),
- (0x03, 0x30, 0x07) => String::from("Cleaning failure"),
- (0x03, asc, ascq) => format!("media error, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
- // Hardware Error
- (0x04, 0x15, 0x01) => String::from("A mechanical positioning error occurred"),
- (0x04, 0x3B, 0x0D) => String::from("Medium destination element full"),
- (0x04, 0x3B, 0x0E) => String::from("Medium source element empty"),
- (0x04, 0x3F, 0x0F) => String::from("Echo buffer overwritten"),
- (0x04, 0x40, 0x80) => String::from("Component failure"),
- (0x04, 0x44, 0x00) => String::from("Firmware detected an internal logic failure"),
- (0x04, 0x53, 0x00) => String::from("A drive did not load or unload a tape"),
- (0x04, 0x53, 0x01) => String::from("A drive did not unload a cartridge"),
- (0x04, 0x53, 0x82) => String::from("Cannot lock the I/E station"),
- (0x04, 0x53, 0x83) => String::from("Cannot unlock the I/E station"),
- (0x04, 0x80, 0xD7) => String::from("Internal software error"),
- (0x04, 0x80, 0xD8) => String::from("Database access error"),
- (0x04, 0x81, 0xB0) => String::from("Internal system communication failed"),
- (0x04, 0x81, 0xB2) => String::from("Robotic controller communication failed"),
- (0x04, 0x81, 0xB3) => String::from("Mechanical positioning error"),
- (0x04, 0x81, 0xB4) => String::from("Cartridge did not transport completely."),
- (0x04, 0x82, 0xFC) => String::from("Drive configuration failed"),
- (0x04, 0x83, 0x00) => String::from("Label too short or too long"),
- (0x04, asc, ascq) => format!("hardware error, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
- // Illegal Request
- (0x05, 0x04, 0x83) => String::from("Door open"),
- (0x05, 0x1A, 0x00) => String::from("Parameter length error"),
- (0x05, 0x20, 0x00) => String::from("Invalid command operation code"),
- (0x05, 0x21, 0x01) => String::from("Invalid element address"),
- (0x05, 0x24, 0x00) => String::from("Invalid field CDB"),
- (0x05, 0x25, 0x00) => String::from("Invalid LUN"),
- (0x05, 0x26, 0x00) => String::from("Invalid field in parameter list"),
- (0x05, 0x26, 0x01) => String::from("Parameter list error: parameter not supported"),
- (0x05, 0x26, 0x02) => String::from("Parameter value invalid"),
- (0x05, 0x26, 0x04) => String::from("Invalid release of persistent reservation"),
- (0x05, 0x2C, 0x00) => String::from("Saving parameters is not supported"),
- (0x05, 0x30, 0x00) => String::from("Incompatible medium installed"),
- (0x05, 0x30, 0x12) => String::from("Incompatible Media loaded to drive"),
- (0x05, 0x39, 0x00) => String::from("Saving parameters is not supported"),
- (0x05, 0x3B, 0x0D) => String::from("Medium destination element full"),
- (0x05, 0x3B, 0x0E) => String::from("Medium source element empty"),
- (0x05, 0x3B, 0x11) => String::from("Magazine not accessible"),
- (0x05, 0x3B, 0x12) => String::from("Magazine not installed"),
- (0x05, 0x3B, 0x18) => String::from("Element disabled"),
- (0x05, 0x3B, 0x1A) => String::from("Data transfer element removed"),
- (0x05, 0x3B, 0xA0) => String::from("Media type does not match destination media type"),
- (0x05, 0x3F, 0x01) => String::from("New firmware loaded"),
- (0x05, 0x3F, 0x03) => String::from("Inquiry data changed"),
- (0x05, 0x44, 0x81) => String::from("Source element not ready"),
- (0x05, 0x44, 0x82) => String::from("Destination element not ready"),
- (0x05, 0x53, 0x02) => String::from("Library media removal prevented state set."),
- (0x05, 0x53, 0x03) => String::from("Drive media removal prevented state set"),
- (0x05, 0x53, 0x81) => String::from("Insert/Eject station door is open"),
- (0x05, 0x82, 0x93) => String::from("Failure session sequence error"),
- (0x05, 0x82, 0x94) => String::from("Failover command sequence error"),
- (0x05, 0x82, 0x95) => String::from("Duplicate failover session key"),
- (0x05, 0x82, 0x96) => String::from("Invalid failover key"),
- (0x05, 0x82, 0x97) => String::from("Failover session that is released"),
- (0x05, 0x83, 0x02) => String::from("Barcode label questionable"),
- (0x05, 0x83, 0x03) => String::from("Cell status and barcode label questionable"),
- (0x05, 0x83, 0x04) => String::from("Data transfer element not installed"),
- (0x05, 0x83, 0x05) => String::from("Data transfer element is varied off and not accessible for library operations"),
- (0x05, 0x83, 0x06) => String::from("Element is contained within an offline tower or I/E station and is not accessible for library operations"),
- (0x05, asc, ascq) => format!("illegal request, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
- // Unit Attention
- (0x06, 0x28, 0x00) => String::from("Not ready to change, medium changed"),
- (0x06, 0x28, 0x01) => String::from("Import/export element that is accessed"),
- (0x06, 0x29, 0x00) => String::from("Power-on or reset occurred"),
- (0x06, 0x29, 0x01) => String::from("Power on occurred"),
- (0x06, 0x29, 0x02) => String::from("SCSI Bus reset occurred"),
- (0x06, 0x29, 0x03) => String::from("Device reset occurred"),
- (0x06, 0x29, 0x04) => String::from("Internal reset occurred"),
- (0x06, 0x2A, 0x01) => String::from("Mode parameters have been changed"),
- (0x06, 0x2A, 0x03) => String::from("Reservations preempted"),
- (0x06, 0x2A, 0x04) => String::from("Reservations released"),
- (0x06, 0x2A, 0x05) => String::from("Registrations preempted"),
- (0x06, asc, ascq) => format!("unit attention, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
- // Aborted Command
- (0x0B, 0x3F, 0x0F) => String::from("ECHO buffer overwritten"),
- (0x0B, 0x44, 0x00) => String::from("Firmware detected an internal logic failure"),
- (0x0B, 0x45, 0x00) => String::from("Select or reselect failure"),
- (0x0B, 0x47, 0x00) => String::from("SCSI parity error"),
- (0x0B, 0x48, 0x00) => String::from("Initiator detected error message received"),
- (0x0B, 0x49, 0x00) => String::from("Invalid message error"),
- (0x0B, 0x4A, 0x00) => String::from("Command phase error"),
- (0x0B, 0x4B, 0x00) => String::from("Data phase error"),
- (0x0B, 0x4E, 0x00) => String::from("Overlapped command attempt"),
- (0x0B, asc, ascq) => format!("aborted command, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
- // Else, simply report values
- _ => format!("sense_key = 0x{:02x}, ASC = 0x{:02x}, ASCQ = 0x{:02x}", self.sense_key, self.asc, self.ascq),
- }
- }
-}
#[derive(Debug)]
pub struct ScsiError {
Ok(info)
}).map_err(|err: Error| format_err!("decode inquiry page failed - {}", err))
}
+
+impl ToString for SenseInfo {
+
+ fn to_string(&self) -> String {
+ // Added codes from Seagate SCSI Commands Reference Manual
+ // Added codes from IBM TS4300 Tape Library SCSI reference manual
+ // Added codes from Quantum Intelligent Libraries SCSI Reference Guide
+ match (self.sense_key, self.asc, self.ascq) {
+ // No sense
+ (0x00, 0x00, 0x00) => String::from("No Additional Sense Information"),
+ (0x00, 0x81, 0x00) => String::from("LA Check Error, LCM bit ="),
+ (0x00, asc, ascq) => format!("no sense, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
+ // Recovered Error
+ (0x01, 0x03, 0x00) => String::from("Peripheral Device Write Fault"),
+ (0x01, 0x09, 0x00) => String::from("Track Following Error"),
+ (0x01, 0x09, 0x01) => String::from("Servo Fault"),
+ (0x01, 0x09, 0x0D) => String::from("Write to at least one copy of a redundant file failed"),
+ (0x01, 0x09, 0x0E) => String::from("Redundant files have < 50% good copies"),
+ (0x01, 0x09, 0xF8) => String::from("Calibration is needed but the QST is set without the Recal Only bit"),
+ (0x01, 0x09, 0xFF) => String::from("Servo Cal completed as part of self-test"),
+ (0x01, 0x0B, 0x01) => String::from("Warning—Specified Temperature Exceeded"),
+ (0x01, 0x0B, 0x02) => String::from("Warning, Enclosure Degraded"),
+ (0x01, 0x0C, 0x01) => String::from("Write Error Recovered With Auto-Reallocation"),
+ (0x01, 0x11, 0x00) => String::from("Unrecovered Read Error"),
+ (0x01, 0x15, 0x01) => String::from("Mechanical Positioning Error"),
+ (0x01, 0x16, 0x00) => String::from("Data Synchronization Mark Error"),
+ (0x01, 0x17, 0x01) => String::from("Recovered Data Using Retries"),
+ (0x01, 0x17, 0x02) => String::from("Recovered Data Using Positive Offset"),
+ (0x01, 0x17, 0x03) => String::from("Recovered Data Using Negative Offset"),
+ (0x01, 0x18, 0x00) => String::from("Recovered Data With ECC"),
+ (0x01, 0x18, 0x01) => String::from("Recovered Data With ECC And Retries Applied"),
+ (0x01, 0x18, 0x02) => String::from("Recovered Data With ECC And/Or Retries, Data Auto-Reallocated"),
+ (0x01, 0x18, 0x07) => String::from("Recovered Data With ECC—Data Rewritten"),
+ (0x01, 0x19, 0x00) => String::from("Defect List Error"),
+ (0x01, 0x1C, 0x00) => String::from("Defect List Not Found"),
+ (0x01, 0x1F, 0x00) => String::from("Number of Defects Overflows the Allocated Space That The Read Defect Command Can Handle"),
+ (0x01, 0x37, 0x00) => String::from("Parameter Rounded"),
+ (0x01, 0x3F, 0x80) => String::from("Buffer contents have changed"),
+ (0x01, 0x40, 0x01) => String::from("DRAM Parity Error"),
+ (0x01, 0x40, 0x02) => String::from("Spinup Error recovered with retries"),
+ (0x01, 0x44, 0x00) => String::from("Internal Target Failure"),
+ (0x01, 0x5D, 0x00) => String::from("Failure Prediction Threshold Exceeded"),
+ (0x01, 0x5D, 0xFF) => String::from("False Failure Prediction Threshold Exceeded"),
+ (0x01, asc, ascq) => format!("recovered error, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
+ // Not Ready
+ (0x02, 0x04, 0x00) => String::from("Logical Unit Not Ready, Cause Not Reportable"),
+ (0x02, 0x04, 0x01) => String::from("Logical Unit Not Ready, Becoming Ready"),
+ (0x02, 0x04, 0x02) => String::from("Logical Unit Not Ready, START UNIT Required"),
+ (0x02, 0x04, 0x03) => String::from("Logical Unit Not Ready, Manual Intervention Required"),
+ (0x02, 0x04, 0x04) => String::from("Logical Unit Not Ready, Format in Progress"),
+ (0x02, 0x04, 0x09) => String::from("Logical Unit Not Ready, Self Test in Progress"),
+ (0x02, 0x04, 0x0A) => String::from("Logical Unit Not Ready, NVC recovery in progress after and exception event"),
+ (0x02, 0x04, 0x11) => String::from("Logical Unit Not Ready, Notify (Enable Spinup) required"),
+ (0x02, 0x04, 0x12) => String::from("Not ready, offline"),
+ (0x02, 0x04, 0x22) => String::from("Logical unit not ready, power cycle required"),
+ (0x02, 0x04, 0x83) => String::from("The library is not ready due to aisle power being disabled"),
+ (0x02, 0x04, 0x8D) => String::from(" The library is not ready because it is offline"),
+ (0x02, 0x04, 0xF0) => String::from("Logical unit not ready, super certify in progress"),
+ (0x02, 0x35, 0x02) => String::from("Enclosure Services Unavailable"),
+ (0x02, 0x3B, 0x12) => String::from("Not ready, magazine removed"),
+ (0x02, asc, ascq) => format!("not ready, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
+ // Media Error
+ (0x03, 0x03, 0x00) => String::from("Peripheral Device Write Fault"),
+ (0x03, 0x09, 0x00) => String::from("Track Following Error"),
+ (0x03, 0x09, 0x04) => String::from("Head Select Fault"),
+ (0x03, 0x0A, 0x01) => String::from("Failed to write super certify log file"),
+ (0x03, 0x0A, 0x02) => String::from("Failed to read super certify log file"),
+ (0x03, 0x0C, 0x00) => String::from("Write Error"),
+ (0x03, 0x0C, 0x02) => String::from("Write Error—Auto Reallocation Failed"),
+ (0x03, 0x0C, 0x03) => String::from("Write Error—Recommend Reassignment"),
+ (0x03, 0x0C, 0xFF) => String::from("Write Error—Too many error recovery revs"),
+ (0x03, 0x11, 0x00) => String::from("Unrecovered Read Error"),
+ (0x03, 0x11, 0x04) => String::from("Unrecovered Read Error—Auto Reallocation Failed"),
+ (0x03, 0x11, 0xFF) => String::from("Unrecovered Read Error—Too many error recovery revs"),
+ (0x03, 0x14, 0x01) => String::from("Record Not Found"),
+ (0x03, 0x15, 0x01) => String::from("Mechanical Positioning Error"),
+ (0x03, 0x16, 0x00) => String::from("Data Synchronization Mark Error"),
+ (0x03, 0x30, 0x00) => String::from("Media error"),
+ (0x03, 0x30, 0x07) => String::from("Cleaning failure"),
+ (0x03, 0x31, 0x00) => String::from("Medium Format Corrupted"),
+ (0x03, 0x31, 0x01) => String::from("Corruption in R/W format request"),
+ (0x03, 0x31, 0x91) => String::from("Corrupt World Wide Name (WWN) in drive information file"),
+ (0x03, 0x32, 0x01) => String::from("Defect List Update Error"),
+ (0x03, 0x32, 0x03) => String::from("Defect list longer than allocated memory"),
+ (0x03, 0x33, 0x00) => String::from("Flash not ready for access"),
+ (0x03, 0x44, 0x00) => String::from("Internal Target Failure"),
+ (0x03, asc, ascq) => format!("media error, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
+ // Hardware Error
+ (0x04, 0x01, 0x00) => String::from("No Index/Logical Block Signal"),
+ (0x04, 0x02, 0x00) => String::from("No SEEK Complete"),
+ (0x04, 0x03, 0x00) => String::from("Peripheral Device Write Fault"),
+ (0x04, 0x09, 0x00) => String::from("Track Following Error"),
+ (0x04, 0x09, 0x01) => String::from("Servo Fault"),
+ (0x04, 0x09, 0x04) => String::from("Head Select Fault"),
+ (0x04, 0x15, 0x01) => String::from("Mechanical Positioning Error"),
+ (0x04, 0x16, 0x00) => String::from("Data Synchronization Mark Error"),
+ (0x04, 0x19, 0x00) => String::from("Defect List Error"),
+ (0x04, 0x1C, 0x00) => String::from("Defect List Not Found"),
+ (0x04, 0x29, 0x00) => String::from("Flashing LED occurred"),
+ (0x04, 0x32, 0x00) => String::from("No Defect Spare Location Available"),
+ (0x04, 0x32, 0x01) => String::from("Defect List Update Error"),
+ (0x04, 0x35, 0x00) => String::from("Unspecified Enclosure Services Failure"),
+ (0x04, 0x35, 0x03) => String::from("Enclosure Transfer Failure"),
+ (0x04, 0x35, 0x04) => String::from("Enclosure Transfer Refused"),
+ (0x04, 0x3B, 0x0D) => String::from("Medium destination element full"),
+ (0x04, 0x3B, 0x0E) => String::from("Medium source element empty"),
+ (0x04, 0x3E, 0x03) => String::from("Logical Unit Failed Self Test"),
+ (0x04, 0x3F, 0x0F) => String::from("Echo buffer overwritten"),
+ (0x04, 0x40, 0x01) => String::from("DRAM Parity Error"),
+ (0x04, 0x40, 0x80) => String::from("Component failure"),
+ (0x04, 0x42, 0x00) => String::from("Power-On Or Self-Test Failure"),
+ (0x04, 0x42, 0x0A) => String::from("Port A failed loopback test"),
+ (0x04, 0x42, 0x0B) => String::from("Port B failed loopback test"),
+ (0x04, 0x44, 0x00) => String::from("Internal Target Failure"),
+ (0x04, 0x44, 0xF2) => String::from("Data Integrity Check Failed on verify"),
+ (0x04, 0x44, 0xF6) => String::from("Data Integrity Check Failed during write"),
+ (0x04, 0x44, 0xFF) => String::from("XOR CDB check error"),
+ (0x04, 0x53, 0x00) => String::from("A drive did not load or unload a tape"),
+ (0x04, 0x53, 0x01) => String::from("A drive did not unload a cartridge"),
+ (0x04, 0x53, 0x82) => String::from("Cannot lock the I/E station"),
+ (0x04, 0x53, 0x83) => String::from("Cannot unlock the I/E station"),
+ (0x04, 0x65, 0x00) => String::from("Voltage Fault"),
+ (0x04, 0x80, 0xD7) => String::from("Internal software error"),
+ (0x04, 0x80, 0xD8) => String::from("Database access error"),
+ (0x04, 0x81, 0x00) => String::from("LA Check Error, LCM bit ="),
+ (0x04, 0x81, 0xB0) => String::from("Internal system communication failed"),
+ (0x04, 0x81, 0xB2) => String::from("Robotic controller communication failed"),
+ (0x04, 0x81, 0xB3) => String::from("Mechanical positioning error"),
+ (0x04, 0x81, 0xB4) => String::from("Cartridge did not transport completely."),
+ (0x04, 0x82, 0xFC) => String::from("Drive configuration failed"),
+ (0x04, 0x83, 0x00) => String::from("Label too short or too long"),
+ (0x04, asc, ascq) => format!("hardware error, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
+ // Illegal Request
+ (0x05, 0x04, 0x83) => String::from("Door open"),
+ (0x05, 0x1A, 0x00) => String::from("Parameter List Length Error"),
+ (0x05, 0x20, 0x00) => String::from("Invalid Command Operation Code"),
+ (0x05, 0x20, 0xF3) => String::from("Invalid linked command operation code"),
+ (0x05, 0x21, 0x01) => String::from("Invalid element address"),
+ (0x05, 0x24, 0x00) => String::from("Invalid Field In CDB"),
+ (0x05, 0x24, 0x01) => String::from("Illegal Queue Type for CDB (Low priority commands must be SIMPLE queue)"),
+ (0x05, 0x24, 0xF0) => String::from("Invalid LBA in linked command"),
+ (0x05, 0x24, 0xF2) => String::from("Invalid linked command operation code"),
+ (0x05, 0x24, 0xF3) => String::from("Illegal G->P operation request"),
+ (0x05, 0x25, 0x00) => String::from("Logical Unit Not Supported"),
+ (0x05, 0x26, 0x00) => String::from("Invalid Field In Parameter List"),
+ (0x05, 0x26, 0x01) => String::from("Parameter Not Supported"),
+ (0x05, 0x26, 0x02) => String::from("Parameter Value Invalid"),
+ (0x05, 0x26, 0x03) => String::from("Invalid Field Parameter—Threshold Parameter"),
+ (0x05, 0x26, 0x04) => String::from("Invalid Release of Active Persistent Reserve"),
+ (0x05, 0x26, 0x05) => String::from("Fail to read valid log dump data"),
+ (0x05, 0x2C, 0x00) => String::from("Command Sequence Error"),
+ (0x05, 0x30, 0x00) => String::from("Incompatible medium installed"),
+ (0x05, 0x30, 0x12) => String::from("Incompatible Media loaded to drive"),
+ (0x05, 0x32, 0x01) => String::from("Defect List Update Error"),
+ (0x05, 0x35, 0x01) => String::from("Unsupported Enclosure Function"),
+ (0x05, 0x39, 0x00) => String::from("Saving parameters is not supported"),
+ (0x05, 0x3B, 0x0D) => String::from("Medium destination element full"),
+ (0x05, 0x3B, 0x0E) => String::from("Medium source element empty"),
+ (0x05, 0x3B, 0x11) => String::from("Magazine not accessible"),
+ (0x05, 0x3B, 0x12) => String::from("Magazine not installed"),
+ (0x05, 0x3B, 0x18) => String::from("Element disabled"),
+ (0x05, 0x3B, 0x1A) => String::from("Data transfer element removed"),
+ (0x05, 0x3B, 0xA0) => String::from("Media type does not match destination media type"),
+ (0x05, 0x3F, 0x01) => String::from("New firmware loaded"),
+ (0x05, 0x3F, 0x03) => String::from("Inquiry data changed"),
+ (0x05, 0x44, 0x81) => String::from("Source element not ready"),
+ (0x05, 0x44, 0x82) => String::from("Destination element not ready"),
+ (0x05, 0x53, 0x02) => String::from("Library media removal prevented state set."),
+ (0x05, 0x53, 0x03) => String::from("Drive media removal prevented state set"),
+ (0x05, 0x53, 0x81) => String::from("Insert/Eject station door is open"),
+ (0x05, 0x55, 0x04) => String::from("PRKT table is full"),
+ (0x05, 0x82, 0x93) => String::from("Failure session sequence error"),
+ (0x05, 0x82, 0x94) => String::from("Failover command sequence error"),
+ (0x05, 0x82, 0x95) => String::from("Duplicate failover session key"),
+ (0x05, 0x82, 0x96) => String::from("Invalid failover key"),
+ (0x05, 0x82, 0x97) => String::from("Failover session that is released"),
+ (0x05, 0x83, 0x02) => String::from("Barcode label questionable"),
+ (0x05, 0x83, 0x03) => String::from("Cell status and barcode label questionable"),
+ (0x05, 0x83, 0x04) => String::from("Data transfer element not installed"),
+ (0x05, 0x83, 0x05) => String::from("Data transfer element is varied off and not accessible for library operations"),
+ (0x05, 0x83, 0x06) => String::from("Element is contained within an offline tower or I/E station and is not accessible for library operations"),
+ (0x05, asc, ascq) => format!("illegal request, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
+ // Unit Attention
+ (0x06, 0x0B, 0x01) => String::from("Warning—Specified Temperature Exceeded"),
+ (0x06, 0x28, 0x00) => String::from("Not ready to change, medium changed"),
+ (0x06, 0x28, 0x01) => String::from("Import/export element that is accessed"),
+ (0x06, 0x29, 0x00) => String::from("Power On, Reset, Or Bus Device Reset Occurred"),
+ (0x06, 0x29, 0x01) => String::from("Power-On Reset Occurred"),
+ (0x06, 0x29, 0x02) => String::from("SCSI Bus Reset Occurred"),
+ (0x06, 0x29, 0x03) => String::from("Bus Device Reset Function Occurred"),
+ (0x06, 0x29, 0x04) => String::from("Internal Reset Occurred"),
+ (0x06, 0x29, 0x05) => String::from("Transceiver Mode Changed To Single-Ended"),
+ (0x06, 0x29, 0x06) => String::from("Transceiver Mode Changed To LVD"),
+ (0x06, 0x29, 0x07) => String::from("Write Log Dump data to disk successful OR IT Nexus Loss"),
+ (0x06, 0x29, 0x08) => String::from("Write Log Dump data to disk fail"),
+ (0x06, 0x29, 0x09) => String::from("Write Log Dump Entry information fail"),
+ (0x06, 0x29, 0x0A) => String::from("Reserved disk space is full"),
+ (0x06, 0x29, 0x0B) => String::from("SDBP test service contained an error, examine status packet(s) for details"),
+ (0x06, 0x29, 0x0C) => String::from("SDBP incoming buffer overflow (incoming packet too big)"),
+ (0x06, 0x29, 0xCD) => String::from("Flashing LED occurred. (Cold reset)"),
+ (0x06, 0x29, 0xCE) => String::from("Flashing LED occurred. (Warm reset)"),
+ (0x06, 0x2A, 0x01) => String::from("Mode Parameters Changed"),
+ (0x06, 0x2A, 0x02) => String::from("Log Parameters Changed"),
+ (0x06, 0x2A, 0x03) => String::from("Reservations preempted"),
+ (0x06, 0x2A, 0x04) => String::from("Reservations Released"),
+ (0x06, 0x2A, 0x05) => String::from("Registrations Preempted"),
+ (0x06, 0x2F, 0x00) => String::from("Tagged Commands Cleared By Another Initiator"),
+ (0x06, 0x3F, 0x00) => String::from("Target Operating Conditions Have Changed"),
+ (0x06, 0x3F, 0x01) => String::from("Device internal reset occurred"),
+ (0x06, 0x3F, 0x02) => String::from("Changed Operating Definition"),
+ (0x06, 0x3F, 0x05) => String::from("Device Identifier Changed"),
+ (0x06, 0x3F, 0x91) => String::from("World Wide Name (WWN) Mismatch"),
+ (0x06, 0x5C, 0x00) => String::from("RPL Status Change"),
+ (0x06, 0x5D, 0x00) => String::from("Failure Prediction Threshold Exceeded"),
+ (0x06, 0x5D, 0xFF) => String::from("False Failure Prediction Threshold Exceeded"),
+ (0x06, 0xB4, 0x00) => String::from("Unreported Deferred Errors have been logged on log page 34h"),
+ (0x06, asc, ascq) => format!("unit attention, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
+ // Aborted Command
+ (0x0B, 0x08, 0x00) => String::from("Logical Unit Communication Failure"),
+ (0x0B, 0x08, 0x01) => String::from("Logical Unit Communication Time-Out"),
+ (0x0B, 0x0B, 0x00) => String::from("Aborted Command"),
+ (0x0B, 0x3F, 0x0F) => String::from("Echo buffer overwritten"),
+ (0x0B, 0x43, 0x00) => String::from("Message Reject Error"),
+ (0x0B, 0x44, 0x00) => String::from("Firmware detected an internal logic failure"),
+ (0x0B, 0x45, 0x00) => String::from("Select/Reselection Failure"),
+ (0x0B, 0x47, 0x00) => String::from("SCSI Parity Error"),
+ (0x0B, 0x47, 0x03) => String::from("Information Unit CRC Error"),
+ (0x0B, 0x47, 0x80) => String::from("Fibre Channel Sequence Error"),
+ (0x0B, 0x48, 0x00) => String::from("Initiator Detected Error Message Received"),
+ (0x0B, 0x49, 0x00) => String::from("Invalid Message Received"),
+ (0x0B, 0x4A, 0x00) => String::from("Command phase error"),
+ (0x0B, 0x4B, 0x00) => String::from("Data Phase Error"),
+ (0x0B, 0x4B, 0x01) => String::from("Invalid transfer tag"),
+ (0x0B, 0x4B, 0x02) => String::from("Too many write data"),
+ (0x0B, 0x4B, 0x03) => String::from("ACK NAK Timeout"),
+ (0x0B, 0x4B, 0x04) => String::from("NAK received"),
+ (0x0B, 0x4B, 0x05) => String::from("Data Offset error"),
+ (0x0B, 0x4B, 0x06) => String::from("Initiator response timeout"),
+ (0x0B, 0x4E, 0x00) => String::from("Overlapped Commands Attempted"),
+ (0x0B, 0x81, 0x00) => String::from("LA Check Error"),
+ (0x0B, asc, ascq) => format!("aborted command, ASC = 0x{:02x}, ASCQ = 0x{:02x}", asc, ascq),
+ // Volume overflow
+ (0x0D, 0x0D, 0x00) => String::from("Volume Overflow Constants"),
+ (0x0D, 0x21, 0x00) => String::from("Logical Block Address Out Of Range"),
+ // Miscompare
+ (0x0E, 0x0E, 0x00) => String::from("Data Miscompare"),
+ (0x0E, 0x1D, 0x00) => String::from("Miscompare During Verify Operation"),
+ // Else, simply report values
+ _ => format!("sense_key = 0x{:02x}, ASC = 0x{:02x}, ASCQ = 0x{:02x}", self.sense_key, self.asc, self.ascq),
+ }
+ }
+}
projects / proxmox-backup.git / commitdiff