* o lanai_change_qos() isn't written yet
*
* o There aren't any ioctl's yet -- I'd like to eventually support
- * setting loopback and LED modes that way. (see lanai_ioctl)
+ * setting loopback and LED modes that way.
*
* o If the segmentation engine or DMA gets shut down we should restart
* card as per section 17.0i. (see lanai_reset)
return result;
}
-#if 0
-/* ioctl operations for card */
-/* NOTE: these are all DEBUGGING ONLY currently */
-static int lanai_ioctl(struct atm_dev *atmdev, unsigned int cmd, void __user *arg)
-{
- int result = 0;
- struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
- switch(cmd) {
- case 2106275:
- shutdown_atm_dev(atmdev);
- return 0;
- case 2200000: {
- unsigned long flags;
- spin_lock_irqsave(&lanai->servicelock, flags);
- run_service(lanai);
- spin_unlock_irqrestore(&lanai->servicelock, flags);
- return 0; }
- case 2200002:
- get_statistics(lanai);
- return 0;
- case 2200003: {
- unsigned int i;
- for (i = 0; i <= 0x5C ; i += 4) {
- if (i==0x48) /* Write-only butt reg */
- continue;
- printk(KERN_CRIT DEV_LABEL " 0x%02X: "
- "0x%08X\n", i,
- (unsigned int) readl(lanai->base + i));
- barrier(); mb();
- pcistatus_check(lanai, 0);
- barrier(); mb();
- }
- return 0; }
- case 2200004: {
- u8 b;
- u16 w;
- u32 dw;
- struct pci_dev *pci = lanai->pci;
- (void) pci_read_config_word(pci, PCI_VENDOR_ID, &w);
- DPRINTK("vendor = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_DEVICE_ID, &w);
- DPRINTK("device = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_COMMAND, &w);
- DPRINTK("command = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_word(pci, PCI_STATUS, &w);
- DPRINTK("status = 0x%X\n", (unsigned int) w);
- (void) pci_read_config_dword(pci,
- PCI_CLASS_REVISION, &dw);
- DPRINTK("class/revision = 0x%X\n", (unsigned int) dw);
- (void) pci_read_config_byte(pci,
- PCI_CACHE_LINE_SIZE, &b);
- DPRINTK("cache line size = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_LATENCY_TIMER, &b);
- DPRINTK("latency = %d (0x%X)\n",
- (int) b, (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_HEADER_TYPE, &b);
- DPRINTK("header type = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_BIST, &b);
- DPRINTK("bist = 0x%X\n", (unsigned int) b);
- /* skipping a few here */
- (void) pci_read_config_byte(pci,
- PCI_INTERRUPT_LINE, &b);
- DPRINTK("pci_int_line = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci,
- PCI_INTERRUPT_PIN, &b);
- DPRINTK("pci_int_pin = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_MIN_GNT, &b);
- DPRINTK("min_gnt = 0x%X\n", (unsigned int) b);
- (void) pci_read_config_byte(pci, PCI_MAX_LAT, &b);
- DPRINTK("max_lat = 0x%X\n", (unsigned int) b); }
- return 0;
-#ifdef USE_POWERDOWN
- case 2200005:
- DPRINTK("Coming out of powerdown\n");
- lanai->conf1 &= ~CONFIG1_POWERDOWN;
- conf1_write(lanai);
- return 0;
-#endif
- default:
- result = -ENOIOCTLCMD;
- }
- return result;
-}
-#else /* !0 */
-#define lanai_ioctl NULL
-#endif /* 0 */
-
static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
{
struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
.dev_close = lanai_dev_close,
.open = lanai_open,
.close = lanai_close,
- .ioctl = lanai_ioctl,
.getsockopt = NULL,
.setsockopt = NULL,
.send = lanai_send,