shift
if test $# -eq 0; then
- echo "$0: option requires an argument -- '$opt'" 1>&2
+ gettext_printf "%s: option requires an argument -- '%s'" "$0" "$opt" 1>&2
exit 1
fi
echo "$1"
setup_force="--force" ;;
-*)
- echo "Unrecognized option \`$option'" 1>&2
+ gettext_printf "Unrecognized option \`%s'\n" "$option" 1>&2
usage
exit 1
;;
*)
if test "x$install_device" != x; then
- echo "More than one install_devices?" 1>&2
+ gettext "More than one install_devices?" 1>&2
+ echo 1>&2
usage
exit 1
fi
if test "x$install_device" = x && ([ "${target_cpu}-${platform}" = "i386-pc" ] \
|| [ "${target_cpu}-${platform}" = "sparc64-ieee1275" ]); then
- echo "install_device not specified." 1>&2
+ gettext "Install device isn't specified." 1>&2
+ echo 1>&2
usage
exit 1
fi
if test -n "$efidir"; then
efi_fs=`"$grub_probe" --target=fs "--device-map=${device_map}" "${efidir}"`
if test "x$efi_fs" = xfat; then :; else
- echo "${efidir} doesn't look like an EFI partition." 1>&2
+ gettext_printf "%s doesn't look like an EFI partition.\n" "${efidir}" 1>&2
efidir=
fi
fi
tmp=`sed -n '/^([fh]d[0-9]*)/s/\(^(.*)\).*/\1/p' "$device_map" \
| sort | uniq -d | sed -n 1p`
if test -n "$tmp"; then
- echo "The drive $tmp is defined multiple times in the device map $device_map" 1>&2
+ gettext_printf "The drive %s is defined multiple times in the device map %s\n" "$tmp" "$device_map" 1>&2
exit 1
fi
else
# Create the core image. First, auto-detect the filesystem module.
fs_module="`echo "${grub_device}" | xargs "$grub_probe" --device-map="${device_map}" --target=fs --device `"
if test "x$fs_module" = x ; then
- echo "Auto-detection of a filesystem of ${grub_device} failed." 1>&2
- echo "Try with --recheck." 1>&2
- echo "If the problem persists please report this together with the output of \"$grub_probe --device-map=\"${device_map}\" --target=fs -v ${grubdir}\" to <bug-grub@gnu.org>" 1>&2
+ gettext_printf "Auto-detection of a filesystem of %s failed.\n" "${grub_device}" 1>&2
+ gettext "Try with --recheck." 1>&2
+ echo 1>&2
+ gettext_printf "If the problem persists please report this together with the output of %s to <%s>" "\"$grub_probe --device-map=\"${device_map}\" --target=fs -v ${grubdir}\"" "bug-grub@gnu.org" 1>&2
exit 1
fi
uuid="`echo "${grub_device}" | xargs "$grub_probe" --device-map="${device_map}" --target=fs_uuid --device`"
if [ "x${uuid}" = "x" ] ; then
if [ "x$platform" != xefi ] && [ "x$platform" != xpc ] && [ x"${platform}" != x"ieee1275" ]; then
- echo "UUID needed with $platform, but the filesystem containing ${grubdir} does not support UUIDs." 1>&2
+ gettext_printf "UUID needed with $platform, but the filesystem containing %s does not support UUIDs.\n" "${grubdir}" 1>&2
elif [ "$disk_module" = ata ]; then
- echo "UUID needed with ata mod, but the filesystem containing ${grubdir} does not support UUIDs." 1>&2
+ gettext_printf "UUID needed with ata mod, but the filesystem containing %s does not support UUIDs.\n" "${grubdir}" 1>&2
else
- echo "UUID needed with cross-disk installs, but the filesystem containing ${grubdir} does not support UUIDs." 1>&2
+ gettext_printf "UUID needed with cross-disk installs, but the filesystem containing %s does not support UUIDs.\n" "${grubdir}" 1>&2
fi
exit 1
elif [ x"$platform" = xloongson ] || [ x"$platform" = xqemu ] || [ x"$platform" = xcoreboot ] || [ x"$platform" = xmultiboot ] || [ x"$platform" = xqemu-mips ]; then
hints="`echo "${grub_device}" | xargs "$grub_probe" --device-map="${device_map}" --target=baremetal_hints --device`"
else
- echo "No hints available for your platform. Expect reduced performance"
+ gettext "No hints available for your platform. Expect reduced performance" 1>&2
+ echo 1>&2
hints=
fi
echo "search.fs_uuid ${uuid} root $hints " >> "${grubdir}/load.cfg"
dev="`echo $grub_device | sed -e 's/\/dev\///' -e 's/[0-9]\+//'`"
partno="`echo $grub_device | sed -e 's/.*[^0-9]\([0-9]\+\)$/\1/'`"
ofpath="`$ofpathname $dev`" || {
- echo "Couldn't find Open Firmware device tree path for $dev."
- echo "You will have to set boot-device manually."
+ gettext_printf "Couldn't find Open Firmware device tree path for %s.\nYou will have to set boot-device manually.\n" "$dev" 1>&2
exit 1
}
if [ "${target_cpu}-${platform}" = "powerpc-ieee1275" ] \
&& [ -n "${install_device}" ]; then
if [ "$("${grub_probe}" -m "${device_map}" -d "${install_device}" -t msdos_parttype)" != "41" ]; then
- echo "The chosen partition is not a PReP partition."
+ gettext "The chosen partition is not a PReP partition." 1>&2
+ echo 1>&2
exit 1
fi
# Change boot device to the harddisk root
boot_device="$ofpath"
dd if="${grubdir}/core.${imgext}" of="${install_device}" status=noxfer || {
- echo "Failed to copy Grub to the PReP partition."
+ gettext "Failed to copy Grub to the PReP partition." 1>&2
+ echo 1>&2
exit 1
}
else
- echo "The PReP partition is not empty. If you are sure you want to use it, run dd to clear it:"
+ gettext "The PReP partition is not empty. If you are sure you want to use it, run dd to clear it:" 1>&2
+ echo 1>&2
echo " dd if=/dev/zero of=${install_device}"
exit 1
fi
fi
"$nvsetenv" boot-device "$boot_device" || {
- echo "$nvsetenv failed."
- echo "You will have to set boot-device manually. At the Open Firmware prompt, type:"
- echo " setenv boot-device $boot_device"
+ gettext_printf "%s failed.\n" "$nvsetenv" 1>&2
+ gettext "You will have to set boot-device manually. At the Open Firmware prompt, type:" 1>&2
+ echo 1>&2
+ echo " setenv boot-device $boot_device" 1>&2
exit 1
}
fi
elif [ x"${target_cpu}-${platform}" = xmips-arc ]; then
dvhtool -d "${install_device}" --unix-to-vh "{grubdir}/core.${imgext}" grub
- echo "You will have to set SystemPartition and OSLoader manually."
+ gettext "You will have to set SystemPartition and OSLoader manually." 1>&2
+ echo 1>&2
elif [ x"$platform" = xefi ]; then
cp "${grubdir}/core.${imgext}" "${efidir}/${efi_file}"
# For old macs. Suggested by Peter Jones.
efidir_drive="$("$grub_probe" --target=drive --device-map= "$efidir")"
efidir_disk="$("$grub_probe" --target=disk --device-map= "$efidir")"
if test -z "$efidir_drive" || test -z "$efidir_disk"; then
- echo "Can't find GRUB drive for $efidir; unable to create EFI Boot Manager entry." >&2
+ gettext_printf "Can't find GRUB drive for %s; unable to create EFI Boot Manager entry.\n" "$efidir" >&2
else
efidir_part="$(echo "$efidir_drive" | sed 's/^([^,]*,[^0-9]*//; s/[^0-9].*//')"
efibootmgr $efi_quiet -c -d "$efidir_disk" -p "$efidir_part" -w \
fi
fi
else
- echo "WARNING: no platform-specific install was performed"
+ gettext "WARNING: no platform-specific install was performed" 1>&2
+ echo 1>&2
fi
-echo "Installation finished. No error reported."
+gettext "Installation finished. No error reported." 1>&2
+echo 1>&2
# Bye.
exit 0
projects / grub2.git / commitdiff