obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
+obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
+ obj-$(CONFIG_GPIO_ICH) += gpio-ich.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
-config AB5500_CORE
- bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
- depends on ABX500_CORE && MFD_DB5500_PRCMU
- select MFD_CORE
- help
- Select this option to enable access to AB5500 power management
- chip. This connects to the db5500 chip via the I2C bus via PRCMU.
- This chip embeds various other multimedia funtionalities as well.
-
-config AB5500_DEBUG
- bool "Enable debug info via debugfs"
- depends on AB5500_CORE && DEBUG_FS
- default y if DEBUG_FS
- help
- Select this option if you want debug information from the AB5500
- using the debug filesystem, debugfs.
-
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
- depends on GENERIC_HARDIRQS && ABX500_CORE
+ depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
select MFD_CORE
help
Select this option to enable access to AB8500 power management
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
- obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
-obj-$(CONFIG_AB5500_CORE) += ab5500-core.o
-obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
- # ab8500-i2c need to come after db8500-prcmu (which provides the channel)
- obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o
+ # ab8500-core need to come after db8500-prcmu (which provides the channel)
+ obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
-obj-$(CONFIG_MFD_DB5500_PRCMU) += db5500-prcmu.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
if (ret < 0)
goto regmap_err;
- desc = irq_to_desc(da9052->chip_irq);
- da9052->irq_base = regmap_irq_chip_get_base(desc->action->dev_id);
+ da9052->irq_base = regmap_irq_chip_get_base(da9052->irq_data);
+ ret = request_threaded_irq(DA9052_IRQ_ADC_EOM, NULL, da9052_auxadc_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "adc irq", da9052);
+ if (ret != 0)
+ dev_err(da9052->dev, "DA9052 ADC IRQ failed ret=%d\n", ret);
+
ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info,
ARRAY_SIZE(da9052_subdev_info), NULL, 0);
if (ret)
void da9052_device_exit(struct da9052 *da9052)
{
- regmap_del_irq_chip(da9052->chip_irq,
- irq_get_irq_data(da9052->irq_base)->chip_data);
+ free_irq(DA9052_IRQ_ADC_EOM, da9052);
+ regmap_del_irq_chip(da9052->chip_irq, da9052->irq_data);
mfd_remove_devices(da9052->dev);
}
platform_set_drvdata(pdev, NULL);
- free_irq(platform_get_irq_byname(pdev, "UV"), dcdc);
+ free_irq(wm831x_irq(dcdc->wm831x, platform_get_irq_byname(pdev, "UV")),
+ dcdc);
regulator_unregister(dcdc->regulator);
- kfree(dcdc);
return 0;
}
struct device *dev;
struct regmap *regmap;
+ struct mutex auxadc_lock;
+ struct completion done;
+
int irq_base;
+ struct regmap_irq_chip_data *irq_data;
u8 chip_id;
int chip_irq;