Rename header file to avoid CamelCase.
Hal8188EPhyCfg.h -> hal8188e_phy_cfg.h
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- ******************************************************************************/
-#ifndef __INC_HAL8188EPHYCFG_H__
-#define __INC_HAL8188EPHYCFG_H__
-
-
-/*--------------------------Define Parameters-------------------------------*/
-#define LOOP_LIMIT 5
-#define MAX_STALL_TIME 50 /* us */
-#define AntennaDiversityValue 0x80
-#define MAX_TXPWR_IDX_NMODE_92S 63
-#define Reset_Cnt_Limit 3
-
-#define IQK_MAC_REG_NUM 4
-#define IQK_ADDA_REG_NUM 16
-#define IQK_BB_REG_NUM 9
-#define HP_THERMAL_NUM 8
-
-#define MAX_AGGR_NUM 0x07
-
-
-/*--------------------------Define Parameters-------------------------------*/
-
-
-/*------------------------------Define structure----------------------------*/
-enum sw_chnl_cmd_id {
- CmdID_End,
- CmdID_SetTxPowerLevel,
- CmdID_BBRegWrite10,
- CmdID_WritePortUlong,
- CmdID_WritePortUshort,
- CmdID_WritePortUchar,
- CmdID_RF_WriteReg,
-};
-
-/* 1. Switch channel related */
-struct sw_chnl_cmd {
- enum sw_chnl_cmd_id CmdID;
- u32 Para1;
- u32 Para2;
- u32 msDelay;
-};
-
-enum hw90_block {
- HW90_BLOCK_MAC = 0,
- HW90_BLOCK_PHY0 = 1,
- HW90_BLOCK_PHY1 = 2,
- HW90_BLOCK_RF = 3,
- HW90_BLOCK_MAXIMUM = 4, /* Never use this */
-};
-
-enum rf_radio_path {
- RF_PATH_A = 0, /* Radio Path A */
- RF_PATH_B = 1, /* Radio Path B */
-};
-
-#define MAX_PG_GROUP 13
-
-#define RF_PATH_MAX 2
-#define MAX_RF_PATH RF_PATH_MAX
-#define MAX_TX_COUNT 4 /* path numbers */
-
-#define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */
-#define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8,
- *ch9~11, ch12~13, CH 14
- * total three groups
- */
-#define CHANNEL_GROUP_MAX_88E 6
-
-enum wireless_mode {
- WIRELESS_MODE_UNKNOWN = 0x00,
- WIRELESS_MODE_A = BIT(2),
- WIRELESS_MODE_B = BIT(0),
- WIRELESS_MODE_G = BIT(1),
- WIRELESS_MODE_AUTO = BIT(5),
- WIRELESS_MODE_N_24G = BIT(3),
- WIRELESS_MODE_N_5G = BIT(4),
- WIRELESS_MODE_AC = BIT(6)
-};
-
-enum phy_rate_tx_offset_area {
- RA_OFFSET_LEGACY_OFDM1,
- RA_OFFSET_LEGACY_OFDM2,
- RA_OFFSET_HT_OFDM1,
- RA_OFFSET_HT_OFDM2,
- RA_OFFSET_HT_OFDM3,
- RA_OFFSET_HT_OFDM4,
- RA_OFFSET_HT_CCK,
-};
-
-struct bb_reg_def {
- u32 rfintfs; /* set software control: */
- /* 0x870~0x877[8 bytes] */
- u32 rfintfi; /* readback data: */
- /* 0x8e0~0x8e7[8 bytes] */
- u32 rfintfo; /* output data: */
- /* 0x860~0x86f [16 bytes] */
- u32 rfintfe; /* output enable: */
- /* 0x860~0x86f [16 bytes] */
- u32 rf3wireOffset; /* LSSI data: */
- /* 0x840~0x84f [16 bytes] */
- u32 rfLSSI_Select; /* BB Band Select: */
- /* 0x878~0x87f [8 bytes] */
- u32 rfTxGainStage; /* Tx gain stage: */
- /* 0x80c~0x80f [4 bytes] */
- u32 rfHSSIPara1; /* wire parameter control1 : */
- /* 0x820~0x823,0x828~0x82b,
- * 0x830~0x833, 0x838~0x83b [16 bytes]
- */
- u32 rfHSSIPara2; /* wire parameter control2 : */
- /* 0x824~0x827,0x82c~0x82f, 0x834~0x837,
- * 0x83c~0x83f [16 bytes]
- */
- u32 rfSwitchControl; /* Tx Rx antenna control : */
- /* 0x858~0x85f [16 bytes] */
- u32 rfAGCControl1; /* AGC parameter control1 : */
- /* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
- * 0xc68~0xc6b [16 bytes]
- */
- u32 rfAGCControl2; /* AGC parameter control2 : */
- /* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
- * 0xc6c~0xc6f [16 bytes]
- */
- u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */
- /* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
- * 0xc2c~0xc2f [16 bytes]
- */
- u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter,
- * Rx DC notch filter :
- */
- /* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
- * 0xc28~0xc2b [16 bytes]
- */
- u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */
- /* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
- * 0xc98~0xc9b [16 bytes]
- */
- u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */
- /* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
- * 0xc9c~0xc9f [16 bytes]
- */
- u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
- /* 0x8a0~0x8af [16 bytes] */
- u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for
- * Path A and B
- */
-};
-
-/*------------------------------Define structure----------------------------*/
-
-
-/*------------------------Export global variable----------------------------*/
-/*------------------------Export global variable----------------------------*/
-
-
-/*------------------------Export Marco Definition---------------------------*/
-/*------------------------Export Marco Definition---------------------------*/
-
-
-/*--------------------------Exported Function prototype---------------------*/
-/* */
-/* BB and RF register read/write */
-/* */
-
-/* Read initi reg value for tx power setting. */
-void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);
-
-/* BB TX Power R/W */
-void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
-
-void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);
-
-/* Call after initialization */
-void ChkFwCmdIoDone(struct adapter *adapter);
-
-/* BB/MAC/RF other monitor API */
-void PHY_SetRFPathSwitch_8188E(struct adapter *adapter, bool main);
-
-void PHY_SwitchEphyParameter(struct adapter *adapter);
-
-void PHY_EnableHostClkReq(struct adapter *adapter);
-
-bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);
-
-/*--------------------------Exported Function prototype---------------------*/
-
-#define PHY_SetMacReg PHY_SetBBReg
-
-#define SIC_HW_SUPPORT 0
-
-#define SIC_MAX_POLL_CNT 5
-
-#define SIC_CMD_READY 0
-#define SIC_CMD_WRITE 1
-#define SIC_CMD_READ 2
-
-#define SIC_CMD_REG 0x1EB /* 1byte */
-#define SIC_ADDR_REG 0x1E8 /* 1b9~1ba, 2 bytes */
-#define SIC_DATA_REG 0x1EC /* 1bc~1bf */
-
-#endif /* __INC_HAL8192CPHYCFG_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ ******************************************************************************/
+#ifndef __INC_HAL8188EPHYCFG_H__
+#define __INC_HAL8188EPHYCFG_H__
+
+
+/*--------------------------Define Parameters-------------------------------*/
+#define LOOP_LIMIT 5
+#define MAX_STALL_TIME 50 /* us */
+#define AntennaDiversityValue 0x80
+#define MAX_TXPWR_IDX_NMODE_92S 63
+#define Reset_Cnt_Limit 3
+
+#define IQK_MAC_REG_NUM 4
+#define IQK_ADDA_REG_NUM 16
+#define IQK_BB_REG_NUM 9
+#define HP_THERMAL_NUM 8
+
+#define MAX_AGGR_NUM 0x07
+
+
+/*--------------------------Define Parameters-------------------------------*/
+
+
+/*------------------------------Define structure----------------------------*/
+enum sw_chnl_cmd_id {
+ CmdID_End,
+ CmdID_SetTxPowerLevel,
+ CmdID_BBRegWrite10,
+ CmdID_WritePortUlong,
+ CmdID_WritePortUshort,
+ CmdID_WritePortUchar,
+ CmdID_RF_WriteReg,
+};
+
+/* 1. Switch channel related */
+struct sw_chnl_cmd {
+ enum sw_chnl_cmd_id CmdID;
+ u32 Para1;
+ u32 Para2;
+ u32 msDelay;
+};
+
+enum hw90_block {
+ HW90_BLOCK_MAC = 0,
+ HW90_BLOCK_PHY0 = 1,
+ HW90_BLOCK_PHY1 = 2,
+ HW90_BLOCK_RF = 3,
+ HW90_BLOCK_MAXIMUM = 4, /* Never use this */
+};
+
+enum rf_radio_path {
+ RF_PATH_A = 0, /* Radio Path A */
+ RF_PATH_B = 1, /* Radio Path B */
+};
+
+#define MAX_PG_GROUP 13
+
+#define RF_PATH_MAX 2
+#define MAX_RF_PATH RF_PATH_MAX
+#define MAX_TX_COUNT 4 /* path numbers */
+
+#define CHANNEL_MAX_NUMBER 14 /* 14 is the max chnl number */
+#define MAX_CHNL_GROUP_24G 6 /* ch1~2, ch3~5, ch6~8,
+ *ch9~11, ch12~13, CH 14
+ * total three groups
+ */
+#define CHANNEL_GROUP_MAX_88E 6
+
+enum wireless_mode {
+ WIRELESS_MODE_UNKNOWN = 0x00,
+ WIRELESS_MODE_A = BIT(2),
+ WIRELESS_MODE_B = BIT(0),
+ WIRELESS_MODE_G = BIT(1),
+ WIRELESS_MODE_AUTO = BIT(5),
+ WIRELESS_MODE_N_24G = BIT(3),
+ WIRELESS_MODE_N_5G = BIT(4),
+ WIRELESS_MODE_AC = BIT(6)
+};
+
+enum phy_rate_tx_offset_area {
+ RA_OFFSET_LEGACY_OFDM1,
+ RA_OFFSET_LEGACY_OFDM2,
+ RA_OFFSET_HT_OFDM1,
+ RA_OFFSET_HT_OFDM2,
+ RA_OFFSET_HT_OFDM3,
+ RA_OFFSET_HT_OFDM4,
+ RA_OFFSET_HT_CCK,
+};
+
+struct bb_reg_def {
+ u32 rfintfs; /* set software control: */
+ /* 0x870~0x877[8 bytes] */
+ u32 rfintfi; /* readback data: */
+ /* 0x8e0~0x8e7[8 bytes] */
+ u32 rfintfo; /* output data: */
+ /* 0x860~0x86f [16 bytes] */
+ u32 rfintfe; /* output enable: */
+ /* 0x860~0x86f [16 bytes] */
+ u32 rf3wireOffset; /* LSSI data: */
+ /* 0x840~0x84f [16 bytes] */
+ u32 rfLSSI_Select; /* BB Band Select: */
+ /* 0x878~0x87f [8 bytes] */
+ u32 rfTxGainStage; /* Tx gain stage: */
+ /* 0x80c~0x80f [4 bytes] */
+ u32 rfHSSIPara1; /* wire parameter control1 : */
+ /* 0x820~0x823,0x828~0x82b,
+ * 0x830~0x833, 0x838~0x83b [16 bytes]
+ */
+ u32 rfHSSIPara2; /* wire parameter control2 : */
+ /* 0x824~0x827,0x82c~0x82f, 0x834~0x837,
+ * 0x83c~0x83f [16 bytes]
+ */
+ u32 rfSwitchControl; /* Tx Rx antenna control : */
+ /* 0x858~0x85f [16 bytes] */
+ u32 rfAGCControl1; /* AGC parameter control1 : */
+ /* 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
+ * 0xc68~0xc6b [16 bytes]
+ */
+ u32 rfAGCControl2; /* AGC parameter control2 : */
+ /* 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
+ * 0xc6c~0xc6f [16 bytes]
+ */
+ u32 rfRxIQImbalance; /* OFDM Rx IQ imbalance matrix : */
+ /* 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
+ * 0xc2c~0xc2f [16 bytes]
+ */
+ u32 rfRxAFE; /* Rx IQ DC ofset and Rx digital filter,
+ * Rx DC notch filter :
+ */
+ /* 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
+ * 0xc28~0xc2b [16 bytes]
+ */
+ u32 rfTxIQImbalance; /* OFDM Tx IQ imbalance matrix */
+ /* 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
+ * 0xc98~0xc9b [16 bytes]
+ */
+ u32 rfTxAFE; /* Tx IQ DC Offset and Tx DFIR type */
+ /* 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
+ * 0xc9c~0xc9f [16 bytes]
+ */
+ u32 rfLSSIReadBack; /* LSSI RF readback data SI mode */
+ /* 0x8a0~0x8af [16 bytes] */
+ u32 rfLSSIReadBackPi; /* LSSI RF readback data PI mode 0x8b8-8bc for
+ * Path A and B
+ */
+};
+
+/*------------------------------Define structure----------------------------*/
+
+
+/*------------------------Export global variable----------------------------*/
+/*------------------------Export global variable----------------------------*/
+
+
+/*------------------------Export Marco Definition---------------------------*/
+/*------------------------Export Marco Definition---------------------------*/
+
+
+/*--------------------------Exported Function prototype---------------------*/
+/* */
+/* BB and RF register read/write */
+/* */
+
+/* Read initi reg value for tx power setting. */
+void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);
+
+/* BB TX Power R/W */
+void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
+
+void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);
+
+/* Call after initialization */
+void ChkFwCmdIoDone(struct adapter *adapter);
+
+/* BB/MAC/RF other monitor API */
+void PHY_SetRFPathSwitch_8188E(struct adapter *adapter, bool main);
+
+void PHY_SwitchEphyParameter(struct adapter *adapter);
+
+void PHY_EnableHostClkReq(struct adapter *adapter);
+
+bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);
+
+/*--------------------------Exported Function prototype---------------------*/
+
+#define PHY_SetMacReg PHY_SetBBReg
+
+#define SIC_HW_SUPPORT 0
+
+#define SIC_MAX_POLL_CNT 5
+
+#define SIC_CMD_READY 0
+#define SIC_CMD_WRITE 1
+#define SIC_CMD_READ 2
+
+#define SIC_CMD_REG 0x1EB /* 1byte */
+#define SIC_ADDR_REG 0x1E8 /* 1b9~1ba, 2 bytes */
+#define SIC_DATA_REG 0x1EC /* 1bc~1bf */
+
+#endif /* __INC_HAL8192CPHYCFG_H */
#include <osdep_service.h>
#include <drv_types.h>
-#include <Hal8188EPhyCfg.h>
+#include <hal8188e_phy_cfg.h>
enum RTL871X_HCI_TYPE {
RTW_PCIE = BIT(0),
/* include HAL Related header after HAL Related compiling flags */
#include "rtl8188e_spec.h"
#include "Hal8188EPhyReg.h"
-#include "Hal8188EPhyCfg.h"
+#include "hal8188e_phy_cfg.h"
#include "rtl8188e_dm.h"
#include "rtl8188e_recv.h"
#include "rtl8188e_xmit.h"
projects / mirror_ubuntu-hirsute-kernel.git / commitdiff