DRM_FORMAT_ARGB4444,
};
+static const uint32_t vl_formats[] = {
+ DRM_FORMAT_NV12, /* Semi-planar YUV420 */
+ DRM_FORMAT_YUV420, /* Planar YUV420 */
+ DRM_FORMAT_YUYV, /* Packed YUV422 */
+ DRM_FORMAT_YVYU,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_VYUY,
+ DRM_FORMAT_YUV444, /* YUV444 8bit */
+ /*
+ * TODO: add formats below that HW supports:
+ * - YUV420 P010
+ * - YUV420 Hantro
+ * - YUV444 10bit
+ */
+};
+
+#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
+
+static int zx_vl_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *plane_state)
+{
+ struct drm_framebuffer *fb = plane_state->fb;
+ struct drm_crtc *crtc = plane_state->crtc;
+ struct drm_crtc_state *crtc_state;
+ struct drm_rect clip;
+ int min_scale = FRAC_16_16(1, 8);
+ int max_scale = FRAC_16_16(8, 1);
+
+ if (!crtc || !fb)
+ return 0;
+
+ crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
+ crtc);
+ if (WARN_ON(!crtc_state))
+ return -EINVAL;
+
+ /* nothing to check when disabling or disabled */
+ if (!crtc_state->enable)
+ return 0;
+
+ /* plane must be enabled */
+ if (!plane_state->crtc)
+ return -EINVAL;
+
+ clip.x1 = 0;
+ clip.y1 = 0;
+ clip.x2 = crtc_state->adjusted_mode.hdisplay;
+ clip.y2 = crtc_state->adjusted_mode.vdisplay;
+
+ return drm_plane_helper_check_state(plane_state, &clip,
+ min_scale, max_scale,
+ true, true);
+}
+
+static int zx_vl_get_fmt(uint32_t format)
+{
+ switch (format) {
+ case DRM_FORMAT_NV12:
+ return VL_FMT_YUV420;
+ case DRM_FORMAT_YUV420:
+ return VL_YUV420_PLANAR | VL_FMT_YUV420;
+ case DRM_FORMAT_YUYV:
+ return VL_YUV422_YUYV | VL_FMT_YUV422;
+ case DRM_FORMAT_YVYU:
+ return VL_YUV422_YVYU | VL_FMT_YUV422;
+ case DRM_FORMAT_UYVY:
+ return VL_YUV422_UYVY | VL_FMT_YUV422;
+ case DRM_FORMAT_VYUY:
+ return VL_YUV422_VYUY | VL_FMT_YUV422;
+ case DRM_FORMAT_YUV444:
+ return VL_FMT_YUV444_8BIT;
+ default:
+ WARN_ONCE(1, "invalid pixel format %d\n", format);
+ return -EINVAL;
+ }
+}
+
+static inline void zx_vl_set_update(struct zx_plane *zplane)
+{
+ void __iomem *layer = zplane->layer;
+
+ zx_writel_mask(layer + VL_CTRL0, VL_UPDATE, VL_UPDATE);
+}
+
+static inline void zx_vl_rsz_set_update(struct zx_plane *zplane)
+{
+ zx_writel(zplane->rsz + RSZ_VL_ENABLE_CFG, 1);
+}
+
+static int zx_vl_rsz_get_fmt(uint32_t format)
+{
+ switch (format) {
+ case DRM_FORMAT_NV12:
+ case DRM_FORMAT_YUV420:
+ return RSZ_VL_FMT_YCBCR420;
+ case DRM_FORMAT_YUYV:
+ case DRM_FORMAT_YVYU:
+ case DRM_FORMAT_UYVY:
+ case DRM_FORMAT_VYUY:
+ return RSZ_VL_FMT_YCBCR422;
+ case DRM_FORMAT_YUV444:
+ return RSZ_VL_FMT_YCBCR444;
+ default:
+ WARN_ONCE(1, "invalid pixel format %d\n", format);
+ return -EINVAL;
+ }
+}
+
+static inline u32 rsz_step_value(u32 src, u32 dst)
+{
+ u32 val = 0;
+
+ if (src == dst)
+ val = 0;
+ else if (src < dst)
+ val = RSZ_PARA_STEP((src << 16) / dst);
+ else if (src > dst)
+ val = RSZ_DATA_STEP(src / dst) |
+ RSZ_PARA_STEP(((src << 16) / dst) & 0xffff);
+
+ return val;
+}
+
+static void zx_vl_rsz_setup(struct zx_plane *zplane, uint32_t format,
+ u32 src_w, u32 src_h, u32 dst_w, u32 dst_h)
+{
+ void __iomem *rsz = zplane->rsz;
+ u32 src_chroma_w = src_w;
+ u32 src_chroma_h = src_h;
+ u32 fmt;
+
+ /* Set up source and destination resolution */
+ zx_writel(rsz + RSZ_SRC_CFG, RSZ_VER(src_h - 1) | RSZ_HOR(src_w - 1));
+ zx_writel(rsz + RSZ_DEST_CFG, RSZ_VER(dst_h - 1) | RSZ_HOR(dst_w - 1));
+
+ /* Configure data format for VL RSZ */
+ fmt = zx_vl_rsz_get_fmt(format);
+ if (fmt >= 0)
+ zx_writel_mask(rsz + RSZ_VL_CTRL_CFG, RSZ_VL_FMT_MASK, fmt);
+
+ /* Calculate Chroma height and width */
+ if (fmt == RSZ_VL_FMT_YCBCR420) {
+ src_chroma_w = src_w >> 1;
+ src_chroma_h = src_h >> 1;
+ } else if (fmt == RSZ_VL_FMT_YCBCR422) {
+ src_chroma_w = src_w >> 1;
+ }
+
+ /* Set up Luma and Chroma step registers */
+ zx_writel(rsz + RSZ_VL_LUMA_HOR, rsz_step_value(src_w, dst_w));
+ zx_writel(rsz + RSZ_VL_LUMA_VER, rsz_step_value(src_h, dst_h));
+ zx_writel(rsz + RSZ_VL_CHROMA_HOR, rsz_step_value(src_chroma_w, dst_w));
+ zx_writel(rsz + RSZ_VL_CHROMA_VER, rsz_step_value(src_chroma_h, dst_h));
+
+ zx_vl_rsz_set_update(zplane);
+}
+
+static void zx_vl_plane_atomic_update(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+ struct drm_plane_state *state = plane->state;
+ struct drm_framebuffer *fb = state->fb;
+ struct drm_rect *src = &state->src;
+ struct drm_rect *dst = &state->dst;
+ struct drm_gem_cma_object *cma_obj;
+ void __iomem *layer = zplane->layer;
+ void __iomem *hbsc = zplane->hbsc;
+ void __iomem *paddr_reg;
+ dma_addr_t paddr;
+ u32 src_x, src_y, src_w, src_h;
+ u32 dst_x, dst_y, dst_w, dst_h;
+ uint32_t format;
+ u32 fmt;
+ int num_planes;
+ int i;
+
+ if (!fb)
+ return;
+
+ format = fb->pixel_format;
+
+ src_x = src->x1 >> 16;
+ src_y = src->y1 >> 16;
+ src_w = drm_rect_width(src) >> 16;
+ src_h = drm_rect_height(src) >> 16;
+
+ dst_x = dst->x1;
+ dst_y = dst->y1;
+ dst_w = drm_rect_width(dst);
+ dst_h = drm_rect_height(dst);
+
+ /* Set up data address registers for Y, Cb and Cr planes */
+ num_planes = drm_format_num_planes(format);
+ paddr_reg = layer + VL_Y;
+ for (i = 0; i < num_planes; i++) {
+ cma_obj = drm_fb_cma_get_gem_obj(fb, i);
+ paddr = cma_obj->paddr + fb->offsets[i];
+ paddr += src_y * fb->pitches[i];
+ paddr += src_x * drm_format_plane_cpp(format, i);
+ zx_writel(paddr_reg, paddr);
+ paddr_reg += 4;
+ }
+
+ /* Set up source height/width register */
+ zx_writel(layer + VL_SRC_SIZE, GL_SRC_W(src_w) | GL_SRC_H(src_h));
+
+ /* Set up start position register */
+ zx_writel(layer + VL_POS_START, GL_POS_X(dst_x) | GL_POS_Y(dst_y));
+
+ /* Set up end position register */
+ zx_writel(layer + VL_POS_END,
+ GL_POS_X(dst_x + dst_w) | GL_POS_Y(dst_y + dst_h));
+
+ /* Strides of Cb and Cr planes should be identical */
+ zx_writel(layer + VL_STRIDE, LUMA_STRIDE(fb->pitches[0]) |
+ CHROMA_STRIDE(fb->pitches[1]));
+
+ /* Set up video layer data format */
+ fmt = zx_vl_get_fmt(format);
+ if (fmt >= 0)
+ zx_writel(layer + VL_CTRL1, fmt);
+
+ /* Always use scaler since it exists (set for not bypass) */
+ zx_writel_mask(layer + VL_CTRL2, VL_SCALER_BYPASS_MODE,
+ VL_SCALER_BYPASS_MODE);
+
+ zx_vl_rsz_setup(zplane, format, src_w, src_h, dst_w, dst_h);
+
+ /* Enable HBSC block */
+ zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, HBSC_CTRL_EN);
+
+ zx_vou_layer_enable(plane);
+
+ zx_vl_set_update(zplane);
+}
+
+static void zx_plane_atomic_disable(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+ void __iomem *hbsc = zplane->hbsc;
+
+ zx_vou_layer_disable(plane);
+
+ /* Disable HBSC block */
+ zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, 0);
+}
+
+static const struct drm_plane_helper_funcs zx_vl_plane_helper_funcs = {
+ .atomic_check = zx_vl_plane_atomic_check,
+ .atomic_update = zx_vl_plane_atomic_update,
+ .atomic_disable = zx_plane_atomic_disable,
+};
+
static int zx_gl_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *plane_state)
{
zx_writel(zplane->rsz + RSZ_ENABLE_CFG, 1);
}
-void zx_plane_set_update(struct drm_plane *plane)
-{
- struct zx_plane *zplane = to_zx_plane(plane);
-
- zx_gl_rsz_set_update(zplane);
- zx_gl_set_update(zplane);
-}
-
static void zx_gl_rsz_setup(struct zx_plane *zplane, u32 src_w, u32 src_h,
u32 dst_w, u32 dst_h)
{
zx_gl_set_update(zplane);
}
-static void zx_plane_atomic_disable(struct drm_plane *plane,
- struct drm_plane_state *old_state)
-{
- struct zx_plane *zplane = to_zx_plane(plane);
- void __iomem *hbsc = zplane->hbsc;
-
- zx_vou_layer_disable(plane);
-
- /* Disable HBSC block */
- zx_writel_mask(hbsc + HBSC_CTRL0, HBSC_CTRL_EN, 0);
-}
-
static const struct drm_plane_helper_funcs zx_gl_plane_helper_funcs = {
.atomic_check = zx_gl_plane_atomic_check,
.atomic_update = zx_gl_plane_atomic_update,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
+void zx_plane_set_update(struct drm_plane *plane)
+{
+ struct zx_plane *zplane = to_zx_plane(plane);
+
+ /* Do nothing if the plane is not enabled */
+ if (!plane->state->crtc)
+ return;
+
+ switch (plane->type) {
+ case DRM_PLANE_TYPE_PRIMARY:
+ zx_gl_rsz_set_update(zplane);
+ zx_gl_set_update(zplane);
+ break;
+ case DRM_PLANE_TYPE_OVERLAY:
+ zx_vl_rsz_set_update(zplane);
+ zx_vl_set_update(zplane);
+ break;
+ default:
+ WARN_ONCE(1, "unsupported plane type %d\n", plane->type);
+ }
+}
+
static void zx_plane_hbsc_init(struct zx_plane *zplane)
{
void __iomem *hbsc = zplane->hbsc;
format_count = ARRAY_SIZE(gl_formats);
break;
case DRM_PLANE_TYPE_OVERLAY:
- /* TODO: add video layer (vl) support */
+ helper = &zx_vl_plane_helper_funcs;
+ formats = vl_formats;
+ format_count = ARRAY_SIZE(vl_formats);
break;
default:
return -ENODEV;
#define GL_POS_X(x) (((x) << GL_POS_X_SHIFT) & GL_POS_X_MASK)
#define GL_POS_Y(x) (((x) << GL_POS_Y_SHIFT) & GL_POS_Y_MASK)
+/* VL registers */
+#define VL_CTRL0 0x00
+#define VL_UPDATE BIT(3)
+#define VL_CTRL1 0x04
+#define VL_YUV420_PLANAR BIT(5)
+#define VL_YUV422_SHIFT 3
+#define VL_YUV422_YUYV (0 << VL_YUV422_SHIFT)
+#define VL_YUV422_YVYU (1 << VL_YUV422_SHIFT)
+#define VL_YUV422_UYVY (2 << VL_YUV422_SHIFT)
+#define VL_YUV422_VYUY (3 << VL_YUV422_SHIFT)
+#define VL_FMT_YUV420 0
+#define VL_FMT_YUV422 1
+#define VL_FMT_YUV420_P010 2
+#define VL_FMT_YUV420_HANTRO 3
+#define VL_FMT_YUV444_8BIT 4
+#define VL_FMT_YUV444_10BIT 5
+#define VL_CTRL2 0x08
+#define VL_SCALER_BYPASS_MODE BIT(0)
+#define VL_STRIDE 0x0c
+#define LUMA_STRIDE_SHIFT 16
+#define LUMA_STRIDE_MASK (0xffff << LUMA_STRIDE_SHIFT)
+#define CHROMA_STRIDE_SHIFT 0
+#define CHROMA_STRIDE_MASK (0xffff << CHROMA_STRIDE_SHIFT)
+#define VL_SRC_SIZE 0x10
+#define VL_Y 0x14
+#define VL_POS_START 0x30
+#define VL_POS_END 0x34
+
+#define LUMA_STRIDE(x) (((x) << LUMA_STRIDE_SHIFT) & LUMA_STRIDE_MASK)
+#define CHROMA_STRIDE(x) (((x) << CHROMA_STRIDE_SHIFT) & CHROMA_STRIDE_MASK)
+
/* CSC registers */
#define CSC_CTRL0 0x30
#define CSC_COV_MODE_SHIFT 16
#define RSZ_DEST_CFG 0x04
#define RSZ_ENABLE_CFG 0x14
+#define RSZ_VL_LUMA_HOR 0x08
+#define RSZ_VL_LUMA_VER 0x0c
+#define RSZ_VL_CHROMA_HOR 0x10
+#define RSZ_VL_CHROMA_VER 0x14
+#define RSZ_VL_CTRL_CFG 0x18
+#define RSZ_VL_FMT_SHIFT 3
+#define RSZ_VL_FMT_MASK (0x3 << RSZ_VL_FMT_SHIFT)
+#define RSZ_VL_FMT_YCBCR420 (0x0 << RSZ_VL_FMT_SHIFT)
+#define RSZ_VL_FMT_YCBCR422 (0x1 << RSZ_VL_FMT_SHIFT)
+#define RSZ_VL_FMT_YCBCR444 (0x2 << RSZ_VL_FMT_SHIFT)
+#define RSZ_VL_ENABLE_CFG 0x1c
+
#define RSZ_VER_SHIFT 16
#define RSZ_VER_MASK (0xffff << RSZ_VER_SHIFT)
#define RSZ_HOR_SHIFT 0
#define RSZ_VER(x) (((x) << RSZ_VER_SHIFT) & RSZ_VER_MASK)
#define RSZ_HOR(x) (((x) << RSZ_HOR_SHIFT) & RSZ_HOR_MASK)
+#define RSZ_DATA_STEP_SHIFT 16
+#define RSZ_DATA_STEP_MASK (0xffff << RSZ_DATA_STEP_SHIFT)
+#define RSZ_PARA_STEP_SHIFT 0
+#define RSZ_PARA_STEP_MASK (0xffff << RSZ_PARA_STEP_SHIFT)
+
+#define RSZ_DATA_STEP(x) (((x) << RSZ_DATA_STEP_SHIFT) & RSZ_DATA_STEP_MASK)
+#define RSZ_PARA_STEP(x) (((x) << RSZ_PARA_STEP_SHIFT) & RSZ_PARA_STEP_MASK)
+
/* HBSC registers */
#define HBSC_SATURATION 0x00
#define HBSC_HUE 0x04
},
};
+static const struct vou_layer_bits zx_vl_bits[VL_NUM] = {
+ {
+ .enable = OSD_CTRL0_VL0_EN,
+ .chnsel = OSD_CTRL0_VL0_SEL,
+ .clksel = VOU_CLK_VL0_SEL,
+ }, {
+ .enable = OSD_CTRL0_VL1_EN,
+ .chnsel = OSD_CTRL0_VL1_SEL,
+ .clksel = VOU_CLK_VL1_SEL,
+ }, {
+ .enable = OSD_CTRL0_VL2_EN,
+ .chnsel = OSD_CTRL0_VL2_SEL,
+ .clksel = VOU_CLK_VL2_SEL,
+ },
+};
+
struct zx_vou_hw {
struct device *dev;
void __iomem *osd;
zx_writel_mask(vou->osd + OSD_CTRL0, bits->enable, 0);
}
+static void zx_overlay_init(struct drm_device *drm, struct zx_vou_hw *vou)
+{
+ struct device *dev = vou->dev;
+ struct zx_plane *zplane;
+ int i;
+ int ret;
+
+ /*
+ * VL0 has some quirks on scaling support which need special handling.
+ * Let's leave it out for now.
+ */
+ for (i = 1; i < VL_NUM; i++) {
+ zplane = devm_kzalloc(dev, sizeof(*zplane), GFP_KERNEL);
+ if (!zplane) {
+ DRM_DEV_ERROR(dev, "failed to allocate zplane %d\n", i);
+ return;
+ }
+
+ zplane->layer = vou->osd + OSD_VL_OFFSET(i);
+ zplane->hbsc = vou->osd + HBSC_VL_OFFSET(i);
+ zplane->rsz = vou->otfppu + RSZ_VL_OFFSET(i);
+ zplane->bits = &zx_vl_bits[i];
+
+ ret = zx_plane_init(drm, zplane, DRM_PLANE_TYPE_OVERLAY);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "failed to init overlay %d\n", i);
+ continue;
+ }
+ }
+}
+
+static inline void zx_osd_int_update(struct zx_crtc *zcrtc)
+{
+ struct drm_crtc *crtc = &zcrtc->crtc;
+ struct drm_plane *plane;
+
+ vou_chn_set_update(zcrtc);
+
+ drm_for_each_plane_mask(plane, crtc->dev, crtc->state->plane_mask)
+ zx_plane_set_update(plane);
+}
+
static irqreturn_t vou_irq_handler(int irq, void *dev_id)
{
struct zx_vou_hw *vou = dev_id;
state = zx_readl(vou->osd + OSD_INT_STA);
zx_writel(vou->osd + OSD_INT_CLRSTA, state);
- if (state & OSD_INT_MAIN_UPT) {
- vou_chn_set_update(vou->main_crtc);
- zx_plane_set_update(vou->main_crtc->primary);
- }
+ if (state & OSD_INT_MAIN_UPT)
+ zx_osd_int_update(vou->main_crtc);
- if (state & OSD_INT_AUX_UPT) {
- vou_chn_set_update(vou->aux_crtc);
- zx_plane_set_update(vou->aux_crtc->primary);
- }
+ if (state & OSD_INT_AUX_UPT)
+ zx_osd_int_update(vou->aux_crtc);
if (state & OSD_INT_ERROR)
DRM_DEV_ERROR(vou->dev, "OSD ERROR: 0x%08x!\n", state);
goto disable_ppu_clk;
}
+ zx_overlay_init(drm, vou);
+
return 0;
disable_ppu_clk:
projects / mirror_ubuntu-kernels.git / commitdiff