MIPS: Alchemy: Remove USB_DEV_REQ_INT prioritization hack

The Alchemy hardware provides a method to prioritize interrupts
on a controller by assigning them to a differenct core request line.
Assign usb device request interrupt to IC0 Request 0 (which has
highest priority in the core and the dispatcher) and others to
Request 1.  The explicit check for usb device request occurrence
should be obsolete now.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 422ecc632c233b00ae098a6c00e1e52a7c775bcd..ceb98b2f96c3c0a97e579039b173cdf3a6b38db8 100644 (file)
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -39,11 +39,18 @@
 
 static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
 
+/* NOTE on interrupt priorities: The original writers of this code said:
+ *
+ * Because of the tight timing of SETUP token to reply transactions,
+ * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
+ * needs the highest priority.
+ */
+
 /* per-processor fixed function irqs */
 struct au1xxx_irqmap {
        int im_irq;
        int im_type;
-       int im_request;
+       int im_request;         /* set 1 to get higher priority */
 } au1xxx_ic0_map[] __initdata = {
 #if defined(CONFIG_SOC_AU1000)
        { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
@@ -63,14 +70,14 @@ struct au1xxx_irqmap {
        { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
        { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-       { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+       { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
        { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
        { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
@@ -97,12 +104,12 @@ struct au1xxx_irqmap {
        { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-       { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+       { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
        { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
        { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
@@ -129,14 +136,14 @@ struct au1xxx_irqmap {
        { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
        { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-       { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+       { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
        { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
        { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
@@ -163,13 +170,13 @@ struct au1xxx_irqmap {
        { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
-       { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+       { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
        { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
        { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
@@ -191,7 +198,7 @@ struct au1xxx_irqmap {
        { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+       { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
        { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
@@ -507,7 +514,7 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
 asmlinkage void plat_irq_dispatch(void)
 {
        unsigned int pending = read_c0_status() & read_c0_cause();
-       unsigned long s, off, bit;
+       unsigned long s, off;
 
        if (pending & CAUSEF_IP7) {
                do_IRQ(MIPS_CPU_IRQ_BASE + 7);
@@ -527,25 +534,12 @@ asmlinkage void plat_irq_dispatch(void)
        } else
                goto spurious;
 
-       bit = 0;
        s = au_readl(s);
        if (unlikely(!s)) {
 spurious:
                spurious_interrupt();
                return;
        }
-#ifdef AU1000_USB_DEV_REQ_INT
-       /*
-        * Because of the tight timing of SETUP token to reply
-        * transactions, the USB devices-side packet complete
-        * interrupt needs the highest priority.
-        */
-       bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
-       if ((pending & CAUSEF_IP2) && (s & bit)) {
-               do_IRQ(AU1000_USB_DEV_REQ_INT);
-               return;
-       }
-#endif
        do_IRQ(__ffs(s) + off);
 }
 
@@ -566,11 +560,11 @@ static void __init setup_irqmap(struct au1xxx_irqmap *map, int count)
                if (irq_nr >= AU1000_INTC1_INT_BASE) {
                        bit = irq_nr - AU1000_INTC1_INT_BASE;
                        if (map[count].im_request)
-                               au_writel(1 << bit, IC1_ASSIGNCLR);
+                               au_writel(1 << bit, IC1_ASSIGNSET);
                } else {
                        bit = irq_nr - AU1000_INTC0_INT_BASE;
                        if (map[count].im_request)
-                               au_writel(1 << bit, IC0_ASSIGNCLR);
+                               au_writel(1 << bit, IC0_ASSIGNSET);
                }
 
                au1x_ic_settype(irq_nr, map[count].im_type);
@@ -588,7 +582,7 @@ void __init arch_init_irq(void)
        au_writel(0xffffffff, IC0_CFG1CLR);
        au_writel(0xffffffff, IC0_CFG2CLR);
        au_writel(0xffffffff, IC0_MASKCLR);
-       au_writel(0xffffffff, IC0_ASSIGNSET);
+       au_writel(0xffffffff, IC0_ASSIGNCLR);
        au_writel(0xffffffff, IC0_WAKECLR);
        au_writel(0xffffffff, IC0_SRCSET);
        au_writel(0xffffffff, IC0_FALLINGCLR);
@@ -599,7 +593,7 @@ void __init arch_init_irq(void)
        au_writel(0xffffffff, IC1_CFG1CLR);
        au_writel(0xffffffff, IC1_CFG2CLR);
        au_writel(0xffffffff, IC1_MASKCLR);
-       au_writel(0xffffffff, IC1_ASSIGNSET);
+       au_writel(0xffffffff, IC1_ASSIGNCLR);
        au_writel(0xffffffff, IC1_WAKECLR);
        au_writel(0xffffffff, IC1_SRCSET);
        au_writel(0xffffffff, IC1_FALLINGCLR);