ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support

mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts,
so remove the board file.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index 9083399a8ab155a297ca97abbd7a321da60fb03e..2b2d589017b9638e533921be686b55ba78f8429a 100644 (file)
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -23,7 +23,6 @@ CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXC=y
 CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_MX27_3DS=y

diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig
index 433eebb4103fc0fbbf8685158c06e01da056effc..d744692f308dbadd0bbe441f4590c6ab7383643b 100644 (file)
--- a/arch/arm/configs/multi_v4t_defconfig
+++ b/arch/arm/configs/multi_v4t_defconfig
@@ -21,7 +21,6 @@ CONFIG_INTEGRATOR_CM920T=y
 CONFIG_INTEGRATOR_CM922T_XA10=y
 CONFIG_ARCH_MXC=y
 CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
 CONFIG_MACH_IMX1_DT=y
 CONFIG_ARCH_NSPIRE=y
 CONFIG_AEABI=y

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index ee9a318cab31898832710927213ccc363f020e49..52dd9440f04fb26981691eb05b060aac080efd4c 100644 (file)
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -109,14 +109,6 @@ config MACH_SCB9328
        help
          Say Y here if you are using a Synertronixx scb9328 board
 
-config MACH_APF9328
-       bool "APF9328"
-       select IMX_HAVE_PLATFORM_IMX_I2C
-       select IMX_HAVE_PLATFORM_IMX_UART
-       select SOC_IMX1
-       help
-         Say Yes here if you are using the Armadeus APF9328 development board
-
 config MACH_IMX1_DT
        bool "Support i.MX1 platforms from device tree"
        select SOC_IMX1

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 9f5fffd627026e32e9d910ba5003333f13c30a79..3bbd06d76cba4f7b136181a207bcc803b11463f3 100644 (file)
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -37,7 +37,6 @@ endif
 
 # i.MX1 based machines
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
-obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
 obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
 
 # i.MX21 based machines

diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
deleted file mode 100644 (file)
index ebbb5ab..0000000
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/mach-apf9328.c
- *
- * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com>
- *
- * This work is based on mach-scb9328.c which is:
- * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
- * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/dm9000.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int apf9328_pins[] __initconst = {
-       /* UART1 */
-       PC9_PF_UART1_CTS,
-       PC10_PF_UART1_RTS,
-       PC11_PF_UART1_TXD,
-       PC12_PF_UART1_RXD,
-       /* UART2 */
-       PB28_PF_UART2_CTS,
-       PB29_PF_UART2_RTS,
-       PB30_PF_UART2_TXD,
-       PB31_PF_UART2_RXD,
-       /* I2C */
-       PA15_PF_I2C_SDA,
-       PA16_PF_I2C_SCL,
-};
-
-/*
- * The APF9328 can have up to 32MB NOR Flash
- */
-static struct resource flash_resource = {
-       .start  = MX1_CS0_PHYS,
-       .end    = MX1_CS0_PHYS + SZ_32M - 1,
-       .flags  = IORESOURCE_MEM,
-};
-
-static struct physmap_flash_data apf9328_flash_data = {
-       .width  = 2,
-};
-
-static struct platform_device apf9328_flash_device = {
-       .name           = "physmap-flash",
-       .id             = 0,
-       .dev = {
-               .platform_data = &apf9328_flash_data,
-       },
-       .resource = &flash_resource,
-       .num_resources = 1,
-};
-
-/*
- * APF9328 has a DM9000 Ethernet controller
- */
-static struct dm9000_plat_data dm9000_setup = {
-       .flags          = DM9000_PLATF_16BITONLY
-};
-
-static struct resource dm9000_resources[] = {
-       {
-               .start  = MX1_CS4_PHYS + 0x00C00000,
-               .end    = MX1_CS4_PHYS + 0x00C00001,
-               .flags  = IORESOURCE_MEM,
-       }, {
-               .start  = MX1_CS4_PHYS + 0x00C00002,
-               .end    = MX1_CS4_PHYS + 0x00C00003,
-               .flags  = IORESOURCE_MEM,
-       }, {
-               /* irq number is run-time assigned */
-               .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-       },
-};
-
-static struct platform_device dm9000x_device = {
-       .name           = "dm9000",
-       .id             = 0,
-       .num_resources  = ARRAY_SIZE(dm9000_resources),
-       .resource       = dm9000_resources,
-       .dev            = {
-               .platform_data = &dm9000_setup,
-       }
-};
-
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-       .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data apf9328_i2c_data __initconst = {
-       .bitrate = 100000,
-};
-
-static struct platform_device *devices[] __initdata = {
-       &apf9328_flash_device,
-       &dm9000x_device,
-};
-
-static void __init apf9328_init(void)
-{
-       imx1_soc_init();
-
-       mxc_gpio_setup_multiple_pins(apf9328_pins,
-                       ARRAY_SIZE(apf9328_pins),
-                       "APF9328");
-
-       imx1_add_imx_uart0(NULL);
-       imx1_add_imx_uart1(&uart1_pdata);
-
-       imx1_add_imx_i2c(&apf9328_i2c_data);
-
-       dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
-       dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init apf9328_timer_init(void)
-{
-       mx1_clocks_init(32768);
-}
-
-MACHINE_START(APF9328, "Armadeus APF9328")
-       /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
-       .map_io       = mx1_map_io,
-       .init_early   = imx1_init_early,
-       .init_irq     = mx1_init_irq,
-       .init_time      = apf9328_timer_init,
-       .init_machine = apf9328_init,
-       .restart        = mxc_restart,
-MACHINE_END