ARM: at91: sam9263ek: add dt lcd support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 70f835b55c0bd91bb07949bf309ca674264bc82e..15009c9f229328957221a7b536de9ce3c0e8e630 100644 (file)
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -95,6 +95,36 @@
                        };
                };
 
+               fb0: fb@0x00700000 {
+                       display = <&display0>;
+                       status = "okay";
+
+                       display0: display {
+                               bits-per-pixel = <16>;
+                               atmel,lcdcon-backlight;
+                               atmel,dmacon = <0x1>;
+                               atmel,lcdcon2 = <0x80008002>;
+                               atmel,guard-time = <1>;
+
+                               display-timings {
+                                       native-mode = <&timing0>;
+                                       timing0: timing0 {
+                                               clock-frequency = <4965000>;
+                                               hactive = <240>;
+                                               vactive = <320>;
+                                               hback-porch = <1>;
+                                               hfront-porch = <33>;
+                                               vback-porch = <1>;
+                                               vfront-porch = <0>;
+                                               hsync-len = <5>;
+                                               vsync-len = <1>;
+                                               hsync-active = <1>;
+                                               vsync-active = <1>;
+                                       };
+                               };
+                       };
+               };
+
                nand0: nand@40000000 {
                        nand-bus-width = <8>;
                        nand-ecc-mode = "soft";