struct acm_ru *rcv;
unsigned long flags;
unsigned char throttled;
+ struct usb_host_endpoint *ep;
dbg("Entering acm_rx_tasklet");
rcv->buffer = buf;
- usb_fill_bulk_urb(rcv->urb, acm->dev,
- acm->rx_endpoint,
- buf->base,
- acm->readsize,
- acm_read_bulk, rcv);
+ ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out)
+ [usb_pipeendpoint(acm->rx_endpoint)];
+ if (usb_endpoint_xfer_int(&ep->desc))
+ usb_fill_int_urb(rcv->urb, acm->dev,
+ acm->rx_endpoint,
+ buf->base,
+ acm->readsize,
+ acm_read_bulk, rcv, ep->desc.bInterval);
+ else
+ usb_fill_bulk_urb(rcv->urb, acm->dev,
+ acm->rx_endpoint,
+ buf->base,
+ acm->readsize,
+ acm_read_bulk, rcv);
rcv->urb->transfer_dma = buf->dma;
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
goto alloc_fail7;
}
- usb_fill_bulk_urb(snd->urb, usb_dev,
- usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
- NULL, acm->writesize, acm_write_bulk, snd);
+ if (usb_endpoint_xfer_int(epwrite))
+ usb_fill_int_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+ else
+ usb_fill_bulk_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd);
snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
snd->instance = acm;
}
{
struct device *dev = &data->usb_dev->dev;
char *buffer;
- int rv;
+ int rv = 0;
buffer = kmalloc(0x18, GFP_KERNEL);
if (!buffer)
0, 0, buffer, 0x18, USBTMC_TIMEOUT);
if (rv < 0) {
dev_err(dev, "usb_control_msg returned %d\n", rv);
- return rv;
+ goto err_out;
}
dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
if (buffer[0] != USBTMC_STATUS_SUCCESS) {
dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
- return -EPERM;
+ rv = -EPERM;
+ goto err_out;
}
data->capabilities.interface_capabilities = buffer[4];
data->capabilities.usb488_interface_capabilities = buffer[14];
data->capabilities.usb488_device_capabilities = buffer[15];
+err_out:
kfree(buffer);
- return 0;
+ return rv;
}
#define capability_attribute(name) \
depends on USB
config USB_DEVICEFS
- bool "USB device filesystem (DEPRECATED)" if EMBEDDED
+ bool "USB device filesystem (DEPRECATED)"
depends on USB
---help---
If you say Y here (and to "/proc file system support" in the "File
{USB_CLASS_AUDIO, "audio"},
{USB_CLASS_COMM, "comm."},
{USB_CLASS_HID, "HID"},
- {USB_CLASS_HUB, "hub"},
{USB_CLASS_PHYSICAL, "PID"},
+ {USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_PRINTER, "print"},
{USB_CLASS_MASS_STORAGE, "stor."},
+ {USB_CLASS_HUB, "hub"},
{USB_CLASS_CDC_DATA, "data"},
- {USB_CLASS_APP_SPEC, "app."},
- {USB_CLASS_VENDOR_SPEC, "vend."},
- {USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_CSCID, "scard"},
{USB_CLASS_CONTENT_SEC, "c-sec"},
{USB_CLASS_VIDEO, "video"},
+ {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"},
+ {USB_CLASS_MISC, "misc"},
+ {USB_CLASS_APP_SPEC, "app."},
+ {USB_CLASS_VENDOR_SPEC, "vend."},
{-1, "unk."} /* leave as last */
};
struct async *as = urb->context;
struct dev_state *ps = as->ps;
struct siginfo sinfo;
+ struct pid *pid = NULL;
+ uid_t uid = 0;
+ uid_t euid = 0;
+ u32 secid = 0;
+ int signr;
spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
- spin_unlock(&ps->lock);
as->status = urb->status;
- if (as->signr) {
+ signr = as->signr;
+ if (signr) {
sinfo.si_signo = as->signr;
sinfo.si_errno = as->status;
sinfo.si_code = SI_ASYNCIO;
sinfo.si_addr = as->userurb;
- kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
- as->euid, as->secid);
+ pid = as->pid;
+ uid = as->uid;
+ euid = as->euid;
+ secid = as->secid;
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);
+ spin_unlock(&ps->lock);
+
+ if (signr)
+ kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
+ euid, secid);
+
wake_up(&ps->wait);
}
USBDEVFS_URB_ZERO_PACKET |
USBDEVFS_URB_NO_INTERRUPT))
return -EINVAL;
- if (!uurb->buffer)
+ if (uurb->buffer_length > 0 && !uurb->buffer)
return -EINVAL;
if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
(uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
is_in = 0;
uurb->endpoint &= ~USB_DIR_IN;
}
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length)) {
- kfree(dr);
- return -EFAULT;
- }
snoop(&ps->dev->dev, "control urb: bRequest=%02x "
"bRrequestType=%02x wValue=%04x "
"wIndex=%04x wLength=%04x\n",
uurb->number_of_packets = 0;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length))
- return -EFAULT;
snoop(&ps->dev->dev, "bulk urb\n");
break;
return -EINVAL;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length))
- return -EFAULT;
snoop(&ps->dev->dev, "interrupt urb\n");
break;
default:
return -EINVAL;
}
- as = alloc_async(uurb->number_of_packets);
- if (!as) {
+ if (uurb->buffer_length > 0 &&
+ !access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+ uurb->buffer, uurb->buffer_length)) {
kfree(isopkt);
kfree(dr);
- return -ENOMEM;
+ return -EFAULT;
}
- as->urb->transfer_buffer = kmalloc(uurb->buffer_length, GFP_KERNEL);
- if (!as->urb->transfer_buffer) {
+ as = alloc_async(uurb->number_of_packets);
+ if (!as) {
kfree(isopkt);
kfree(dr);
- free_async(as);
return -ENOMEM;
}
+ if (uurb->buffer_length > 0) {
+ as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+ GFP_KERNEL);
+ if (!as->urb->transfer_buffer) {
+ kfree(isopkt);
+ kfree(dr);
+ free_async(as);
+ return -ENOMEM;
+ }
+ }
as->urb->dev = ps->dev;
as->urb->pipe = (uurb->type << 30) |
__create_pipe(ps->dev, uurb->endpoint & 0xf) |
kfree(isopkt);
as->ps = ps;
as->userurb = arg;
- if (uurb->endpoint & USB_DIR_IN)
+ if (is_in && uurb->buffer_length > 0)
as->userbuffer = uurb->buffer;
else
as->userbuffer = NULL;
as->uid = cred->uid;
as->euid = cred->euid;
security_task_getsecid(current, &as->secid);
- if (!is_in) {
+ if (!is_in && uurb->buffer_length > 0) {
if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
- as->urb->transfer_buffer_length)) {
+ uurb->buffer_length)) {
free_async(as);
return -EFAULT;
}
if (as->userbuffer)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
urb->transfer_buffer_length))
- return -EFAULT;
+ goto err_out;
if (put_user(as->status, &userurb->status))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->actual_length, &userurb->actual_length))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->error_count, &userurb->error_count))
- return -EFAULT;
+ goto err_out;
if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
for (i = 0; i < urb->number_of_packets; i++) {
if (put_user(urb->iso_frame_desc[i].actual_length,
&userurb->iso_frame_desc[i].actual_length))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->iso_frame_desc[i].status,
&userurb->iso_frame_desc[i].status))
- return -EFAULT;
+ goto err_out;
}
}
if (put_user(addr, (void __user * __user *)arg))
return -EFAULT;
return 0;
+
+err_out:
+ free_async(as);
+ return -EFAULT;
}
static struct async *reap_as(struct dev_state *ps)
/* has a port been handed over to a companion? */
int (*port_handed_over)(struct usb_hcd *, int);
+ /* CLEAR_TT_BUFFER completion callback */
+ void (*clear_tt_buffer_complete)(struct usb_hcd *,
+ struct usb_host_endpoint *);
+
/* xHCI specific functions */
/* Called by usb_alloc_dev to alloc HC device structures */
int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
* talking to TTs must queue control transfers (not just bulk and iso), so
* both can talk to the same hub concurrently.
*/
-static void hub_tt_kevent (struct work_struct *work)
+static void hub_tt_work(struct work_struct *work)
{
struct usb_hub *hub =
- container_of(work, struct usb_hub, tt.kevent);
+ container_of(work, struct usb_hub, tt.clear_work);
unsigned long flags;
int limit = 100;
struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
+ const struct hc_driver *drv;
int status;
next = hub->tt.clear_list.next;
/* drop lock so HCD can concurrently report other TT errors */
spin_unlock_irqrestore (&hub->tt.lock, flags);
status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
- spin_lock_irqsave (&hub->tt.lock, flags);
-
if (status)
dev_err (&hdev->dev,
"clear tt %d (%04x) error %d\n",
clear->tt, clear->devinfo, status);
+
+ /* Tell the HCD, even if the operation failed */
+ drv = clear->hcd->driver;
+ if (drv->clear_tt_buffer_complete)
+ (drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
kfree(clear);
+ spin_lock_irqsave(&hub->tt.lock, flags);
}
spin_unlock_irqrestore (&hub->tt.lock, flags);
}
/**
- * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @udev: the device whose split transaction failed
- * @pipe: identifies the endpoint of the failed transaction
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
*
* High speed HCDs use this to tell the hub driver that some split control or
* bulk transaction failed in a way that requires clearing internal state of
* It may not be possible for that hub to handle additional full (or low)
* speed transactions until that state is fully cleared out.
*/
-void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
+int usb_hub_clear_tt_buffer(struct urb *urb)
{
+ struct usb_device *udev = urb->dev;
+ int pipe = urb->pipe;
struct usb_tt *tt = udev->tt;
unsigned long flags;
struct usb_tt_clear *clear;
if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
- return;
+ return -ENOMEM;
}
/* info that CLEAR_TT_BUFFER needs */
: (USB_ENDPOINT_XFER_BULK << 11);
if (usb_pipein (pipe))
clear->devinfo |= 1 << 15;
-
+
+ /* info for completion callback */
+ clear->hcd = bus_to_hcd(udev->bus);
+ clear->ep = urb->ep;
+
/* tell keventd to clear state for this TT */
spin_lock_irqsave (&tt->lock, flags);
list_add_tail (&clear->clear_list, &tt->clear_list);
- schedule_work (&tt->kevent);
+ schedule_work(&tt->clear_work);
spin_unlock_irqrestore (&tt->lock, flags);
+ return 0;
}
-EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer);
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
/* If do_delay is false, return the number of milliseconds the caller
* needs to delay.
if (hub->has_indicators)
cancel_delayed_work_sync(&hub->leds);
if (hub->tt.hub)
- cancel_work_sync(&hub->tt.kevent);
+ cancel_work_sync(&hub->tt.clear_work);
}
/* caller has locked the hub device */
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
- INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
+ INIT_WORK(&hub->tt.clear_work, hub_tt_work);
switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
spinlock_t lock;
struct list_head clear_list; /* of usb_tt_clear */
- struct work_struct kevent;
+ struct work_struct clear_work;
};
struct usb_tt_clear {
struct list_head clear_list;
unsigned tt;
u16 devinfo;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
};
-extern void usb_hub_tt_clear_buffer(struct usb_device *dev, int pipe);
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
extern void usb_ep0_reinit(struct usb_device *);
#endif /* __LINUX_HUB_H */
return rc;
}
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+ int err;
+
+ if (dev->have_langid)
+ return 0;
+
+ if (dev->string_langid < 0)
+ return -EPIPE;
+
+ err = usb_string_sub(dev, 0, 0, tbuf);
+
+ /* If the string was reported but is malformed, default to english
+ * (0x0409) */
+ if (err == -ENODATA || (err > 0 && err < 4)) {
+ dev->string_langid = 0x0409;
+ dev->have_langid = 1;
+ dev_err(&dev->dev,
+ "string descriptor 0 malformed (err = %d), "
+ "defaulting to 0x%04x\n",
+ err, dev->string_langid);
+ return 0;
+ }
+
+ /* In case of all other errors, we assume the device is not able to
+ * deal with strings at all. Set string_langid to -1 in order to
+ * prevent any string to be retrieved from the device */
+ if (err < 0) {
+ dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+ err);
+ dev->string_langid = -1;
+ return -EPIPE;
+ }
+
+ /* always use the first langid listed */
+ dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+ dev->have_langid = 1;
+ dev_dbg(&dev->dev, "default language 0x%04x\n",
+ dev->string_langid);
+ return 0;
+}
+
/**
* usb_string - returns UTF-8 version of a string descriptor
* @dev: the device whose string descriptor is being retrieved
if (!tbuf)
return -ENOMEM;
- /* get langid for strings if it's not yet known */
- if (!dev->have_langid) {
- err = usb_string_sub(dev, 0, 0, tbuf);
- if (err < 0) {
- dev_err(&dev->dev,
- "string descriptor 0 read error: %d\n",
- err);
- } else if (err < 4) {
- dev_err(&dev->dev, "string descriptor 0 too short\n");
- } else {
- dev->string_langid = tbuf[2] | (tbuf[3] << 8);
- /* always use the first langid listed */
- dev_dbg(&dev->dev, "default language 0x%04x\n",
- dev->string_langid);
- }
-
- dev->have_langid = 1;
- }
+ err = usb_get_langid(dev, tbuf);
+ if (err < 0)
+ goto errout;
err = usb_string_sub(dev, dev->string_langid, index, tbuf);
if (err < 0)
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_IMX
+ boolean "Freescale IMX USB Peripheral Controller"
+ depends on ARCH_MX1
+ help
+ Freescale's IMX series include an integrated full speed
+ USB 1.1 device controller. The controller in the IMX series
+ is register-compatible.
+
+ It has Six fixed-function endpoints, as well as endpoint
+ zero (for control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "imx_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_IMX
+ tristate
+ depends on USB_GADGET_IMX
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_S3C2410
boolean "S3C2410 USB Device Controller"
depends on ARCH_S3C2410
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
-config USB_GADGET_IMX
- boolean "Freescale IMX USB Peripheral Controller"
- depends on ARCH_MX1
- help
- Freescale's IMX series include an integrated full speed
- USB 1.1 device controller. The controller in the IMX series
- is register-compatible.
-
- It has Six fixed-function endpoints, as well as endpoint
- zero (for control transfers).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "imx_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_IMX
- tristate
- depends on USB_GADGET_IMX
- default USB_GADGET
- select USB_GADGET_SELECTED
-
config USB_GADGET_M66592
boolean "Renesas M66592 USB Peripheral Controller"
select USB_GADGET_DUALSPEED
config USB_AUDIO
tristate "Audio Gadget (EXPERIMENTAL)"
depends on SND
+ select SND_PCM
help
Gadget Audio is compatible with USB Audio Class specification 1.0.
It will include at least one AudioControl interface, zero or more
* Instead: allocate your own, using normal USB-IF procedures.
*/
-/* Thanks to NetChip Technologies for donating this product ID. */
-#define AUDIO_VENDOR_NUM 0x0525 /* NetChip */
-#define AUDIO_PRODUCT_NUM 0xa4a1 /* Linux-USB Audio Gadget */
+/* Thanks to Linux Foundation for donating this product ID. */
+#define AUDIO_VENDOR_NUM 0x1d6b /* Linux Foundation */
+#define AUDIO_PRODUCT_NUM 0x0101 /* Linux-USB Audio Gadget */
/*-------------------------------------------------------------------------*/
/* CDC Subset */
eth_config_driver.label = "CDC Subset/SAFE";
- device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
- device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
- device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+ device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
+ if (!has_rndis())
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
}
if (has_rndis()) {
/* RNDIS plus ECM-or-Subset */
- device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
- device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+ device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
device_desc.bNumConfigurations = 2;
}
{
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
- if (mach->gpio_vbus) {
+ if (gpio_is_valid(mach->gpio_vbus)) {
int value = gpio_get_value(mach->gpio_vbus);
if (mach->gpio_vbus_inverted)
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int off_level = mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, off_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int on_level = !mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, on_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
udc = container_of(_gadget, struct pxa25x_udc, gadget);
/* not all boards support pullup control */
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
return -EOPNOTSUPP;
udc->pullup = (is_active != 0);
USIR0 |= tmp;
handled = 1;
}
+#ifndef CONFIG_USB_PXA25X_SMALL
if (usir1 & tmp) {
handle_ep(&dev->ep[i+8]);
USIR1 |= tmp;
handled = 1;
}
+#endif
}
}
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
"pxa25x_udc GPIO VBUS"))) {
dev_dbg(&pdev->dev,
} else
vbus_irq = 0;
- if (dev->mach->gpio_pullup) {
+ if (gpio_is_valid(dev->mach->gpio_pullup)) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
"pca25x_udc GPIO PULLUP"))) {
dev_dbg(&pdev->dev,
#endif
free_irq(irq, dev);
err_irq1:
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
- if (dev->mach->gpio_vbus)
+ if (gpio_is_valid(dev->mach->gpio_vbus))
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
clk_put(dev->clk);
free_irq(LUBBOCK_USB_IRQ, dev);
}
#endif
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
gpio_free(dev->mach->gpio_vbus);
}
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
clk_put(dev->clk);
struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
WARNING("USB host won't detect disconnect!\n");
udc->suspended = 1;
case OID_802_3_MAC_OPTIONS:
pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__);
+ *outbuf = cpu_to_le32(0);
+ retval = 0;
break;
/* ieee802.3 statistics OIDs (table 4-4) */
Enables support for the USB controller on the MPC52xx or
STB03xxx processor chip. If unsure, say Y.
-config USB_OHCI_HCD_PPC_OF
- bool "OHCI support for PPC USB controller on OF platform bus"
- depends on USB_OHCI_HCD && PPC_OF
- default y
- ---help---
- Enables support for the USB controller PowerPC present on the
- OpenFirmware platform bus.
-
config USB_OHCI_HCD_PPC_OF_BE
- bool "Support big endian HC"
- depends on USB_OHCI_HCD_PPC_OF
- default y
+ bool "OHCI support for OF platform bus (big endian)"
+ depends on USB_OHCI_HCD && PPC_OF
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
+ ---help---
+ Enables support for big-endian USB controllers present on the
+ OpenFirmware platform bus.
config USB_OHCI_HCD_PPC_OF_LE
- bool "Support little endian HC"
- depends on USB_OHCI_HCD_PPC_OF
- default n
+ bool "OHCI support for OF platform bus (little endian)"
+ depends on USB_OHCI_HCD && PPC_OF
select USB_OHCI_LITTLE_ENDIAN
+ ---help---
+ Enables support for little-endian USB controllers present on the
+ OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+ bool
+ depends on USB_OHCI_HCD && PPC_OF
+ default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PCI
bool "OHCI support for PCI-bus USB controllers"
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
schedule_timeout_uninterruptible(1);
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
+ if (qh->clearing_tt)
+ goto idle_timeout;
if (list_empty (&qh->qtd_list)) {
qh_put (qh);
break;
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct ehci_qh *qh;
int eptype = usb_endpoint_type(&ep->desc);
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ unsigned long flags;
if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
return;
- rescan:
- spin_lock_irq(&ehci->lock);
+ spin_lock_irqsave(&ehci->lock, flags);
qh = ep->hcpriv;
/* For Bulk and Interrupt endpoints we maintain the toggle state
* the toggle bit in the QH.
*/
if (qh) {
+ usb_settoggle(qh->dev, epnum, is_out, 0);
if (!list_empty(&qh->qtd_list)) {
WARN_ONCE(1, "clear_halt for a busy endpoint\n");
- } else if (qh->qh_state == QH_STATE_IDLE) {
- qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
- } else {
- /* It's not safe to write into the overlay area
- * while the QH is active. Unlink it first and
- * wait for the unlink to complete.
+ } else if (qh->qh_state == QH_STATE_LINKED) {
+
+ /* The toggle value in the QH can't be updated
+ * while the QH is active. Unlink it now;
+ * re-linking will call qh_refresh().
*/
- if (qh->qh_state == QH_STATE_LINKED) {
- if (eptype == USB_ENDPOINT_XFER_BULK) {
- unlink_async(ehci, qh);
- } else {
- intr_deschedule(ehci, qh);
- (void) qh_schedule(ehci, qh);
- }
+ if (eptype == USB_ENDPOINT_XFER_BULK) {
+ unlink_async(ehci, qh);
+ } else {
+ intr_deschedule(ehci, qh);
+ (void) qh_schedule(ehci, qh);
}
- spin_unlock_irq(&ehci->lock);
- schedule_timeout_uninterruptible(1);
- goto rescan;
}
}
- spin_unlock_irq(&ehci->lock);
+ spin_unlock_irqrestore(&ehci->lock, flags);
}
static int ehci_get_frame (struct usb_hcd *hcd)
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ixp4xx_ehci_probe(struct platform_device *pdev)
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static void __init
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
/*-------------------------------------------------------------------------*/
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
qh->hw_alt_next = EHCI_LIST_END(ehci);
+ /* Except for control endpoints, we make hardware maintain data
+ * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+ * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+ * ever clear it.
+ */
+ if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+ unsigned is_out, epnum;
+
+ is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+ epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
+ if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+ qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+ usb_settoggle (qh->dev, epnum, is_out, 1);
+ }
+ }
+
/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
wmb ();
qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
/*-------------------------------------------------------------------------*/
+static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_qh *qh = ep->hcpriv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ehci->lock, flags);
+ qh->clearing_tt = 0;
+ if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+ && HC_IS_RUNNING(hcd->state))
+ qh_link_async(ehci, qh);
+ spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
+ struct urb *urb, u32 token)
+{
+
+ /* If an async split transaction gets an error or is unlinked,
+ * the TT buffer may be left in an indeterminate state. We
+ * have to clear the TT buffer.
+ *
+ * Note: this routine is never called for Isochronous transfers.
+ */
+ if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef DEBUG
+ struct usb_device *tt = urb->dev->tt->hub;
+ dev_dbg(&tt->dev,
+ "clear tt buffer port %d, a%d ep%d t%08x\n",
+ urb->dev->ttport, urb->dev->devnum,
+ usb_pipeendpoint(urb->pipe), token);
+#endif /* DEBUG */
+ if (!ehci_is_TDI(ehci)
+ || urb->dev->tt->hub !=
+ ehci_to_hcd(ehci)->self.root_hub) {
+ if (usb_hub_clear_tt_buffer(urb) == 0)
+ qh->clearing_tt = 1;
+ } else {
+
+ /* REVISIT ARC-derived cores don't clear the root
+ * hub TT buffer in this way...
+ */
+ }
+ }
+}
+
static int qtd_copy_status (
struct ehci_hcd *ehci,
struct urb *urb,
if (token & QTD_STS_BABBLE) {
/* FIXME "must" disable babbling device's port too */
status = -EOVERFLOW;
+ /* CERR nonzero + halt --> stall */
+ } else if (QTD_CERR(token)) {
+ status = -EPIPE;
+
+ /* In theory, more than one of the following bits can be set
+ * since they are sticky and the transaction is retried.
+ * Which to test first is rather arbitrary.
+ */
} else if (token & QTD_STS_MMF) {
/* fs/ls interrupt xfer missed the complete-split */
status = -EPROTO;
? -ENOSR /* hc couldn't read data */
: -ECOMM; /* hc couldn't write data */
} else if (token & QTD_STS_XACT) {
- /* timeout, bad crc, wrong PID, etc; retried */
- if (QTD_CERR (token))
- status = -EPIPE;
- else {
- ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
- urb->dev->devpath,
- usb_pipeendpoint (urb->pipe),
- usb_pipein (urb->pipe) ? "in" : "out");
- status = -EPROTO;
- }
- /* CERR nonzero + no errors + halt --> stall */
- } else if (QTD_CERR (token))
- status = -EPIPE;
- else /* unknown */
+ /* timeout, bad CRC, wrong PID, etc */
+ ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
+ urb->dev->devpath,
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "in" : "out");
+ status = -EPROTO;
+ } else { /* unknown */
status = -EPROTO;
+ }
ehci_vdbg (ehci,
"dev%d ep%d%s qtd token %08x --> status %d\n",
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
token, status);
-
- /* if async CSPLIT failed, try cleaning out the TT buffer */
- if (status != -EPIPE
- && urb->dev->tt
- && !usb_pipeint(urb->pipe)
- && ((token & QTD_STS_MMF) != 0
- || QTD_CERR(token) == 0)
- && (!ehci_is_TDI(ehci)
- || urb->dev->tt->hub !=
- ehci_to_hcd(ehci)->self.root_hub)) {
-#ifdef DEBUG
- struct usb_device *tt = urb->dev->tt->hub;
- dev_dbg (&tt->dev,
- "clear tt buffer port %d, a%d ep%d t%08x\n",
- urb->dev->ttport, urb->dev->devnum,
- usb_pipeendpoint (urb->pipe), token);
-#endif /* DEBUG */
- /* REVISIT ARC-derived cores don't clear the root
- * hub TT buffer in this way...
- */
- usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
- }
}
return status;
/* qh unlinked; token in overlay may be most current */
if (state == QH_STATE_IDLE
&& cpu_to_hc32(ehci, qtd->qtd_dma)
- == qh->hw_current)
+ == qh->hw_current) {
token = hc32_to_cpu(ehci, qh->hw_token);
+ /* An unlink may leave an incomplete
+ * async transaction in the TT buffer.
+ * We have to clear it.
+ */
+ ehci_clear_tt_buffer(ehci, qh, urb, token);
+ }
+
/* force halt for unlinked or blocked qh, so we'll
* patch the qh later and so that completions can't
* activate it while we "know" it's stopped.
&& (qtd->hw_alt_next
& EHCI_LIST_END(ehci)))
last_status = -EINPROGRESS;
+
+ /* As part of low/full-speed endpoint-halt processing
+ * we must clear the TT buffer (11.17.5).
+ */
+ if (unlikely(last_status != -EINPROGRESS &&
+ last_status != -EREMOTEIO))
+ ehci_clear_tt_buffer(ehci, qh, urb, token);
}
/* if we're removing something not at the queue head,
qh->qh_state = QH_STATE_IDLE;
qh->hw_info1 = cpu_to_hc32(ehci, info1);
qh->hw_info2 = cpu_to_hc32(ehci, info2);
+ usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
qh_refresh (ehci, qh);
return qh;
}
__hc32 dma = QH_NEXT(ehci, qh->qh_dma);
struct ehci_qh *head;
+ /* Don't link a QH if there's a Clear-TT-Buffer pending */
+ if (unlikely(qh->clearing_tt))
+ return;
+
/* (re)start the async schedule? */
head = ehci->async;
timer_action_done (ehci, TIMER_ASYNC_OFF);
}
}
- /* clear halt and maybe recover from silicon quirk */
+ /* clear halt and/or toggle; and maybe recover from silicon quirk */
if (qh->qh_state == QH_STATE_IDLE)
qh_refresh (ehci, qh);
desc->status = -EPROTO;
/* HC need not update length with this error */
- if (!(t & EHCI_ISOC_BABBLE))
- desc->actual_length = EHCI_ITD_LENGTH (t);
+ if (!(t & EHCI_ISOC_BABBLE)) {
+ desc->actual_length = EHCI_ITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
+ }
} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
desc->status = 0;
- desc->actual_length = EHCI_ITD_LENGTH (t);
+ desc->actual_length = EHCI_ITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
} else {
/* URB was too late */
desc->status = -EXDEV;
desc->status = -EPROTO;
} else {
desc->status = 0;
- desc->actual_length = desc->length - SITD_LENGTH (t);
+ desc->actual_length = desc->length - SITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
}
stream->depth -= stream->interval << 3;
unsigned short period; /* polling interval */
unsigned short start; /* where polling starts */
#define NO_FRAME ((unsigned short)~0) /* pick new start */
+
struct usb_device *dev; /* access to TT */
+ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
} __attribute__ ((aligned (32)));
/*-------------------------------------------------------------------------*/
out_be16(&usb->fhci->regs->usb_event,
usb->saved_msk);
} else if (usb->port_status == FHCI_PORT_DISABLED) {
- if (fhci_ioports_check_bus_state(fhci) == 1 &&
- usb->port_status != FHCI_PORT_LOW &&
- usb->port_status != FHCI_PORT_FULL)
+ if (fhci_ioports_check_bus_state(fhci) == 1)
fhci_device_connected_interrupt(fhci);
}
usb_er &= ~USB_E_RESET_MASK;
}
if (usb_er & USB_E_IDLE_MASK) {
- if (usb->port_status == FHCI_PORT_DISABLED &&
- usb->port_status != FHCI_PORT_LOW &&
- usb->port_status != FHCI_PORT_FULL) {
+ if (usb->port_status == FHCI_PORT_DISABLED) {
usb_er &= ~USB_E_RESET_MASK;
fhci_device_connected_interrupt(fhci);
} else if (usb->port_status ==
static struct platform_driver isp1760_plat_driver = {
.probe = isp1760_plat_probe,
- .remove = isp1760_plat_remove,
+ .remove = __devexit_p(isp1760_plat_remove),
.driver = {
.name = "isp1760",
},
#include <mach/hardware.h>
#include <mach/memory.h>
#include <mach/gpio.h>
+#include <mach/cputype.h>
#include <asm/mach-types.h>
#include "musb_core.h"
#ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV 87
+#define GPIO_nVBUS_DRV 144
#endif
#include "davinci.h"
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (is_host_enabled(musb) && drvvbus) {
- musb->is_active = 1;
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
- /* NOTE: this must complete poweron within 100 msec */
+ /* NOTE: this must complete poweron within 100 msec
+ * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+ */
davinci_source_power(musb, drvvbus, 0);
DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
__raw_writel(phy_ctrl, USB_PHY_CTRL);
}
+ /* On dm355, the default-A state machine needs DRVVBUS control.
+ * If we won't be a host, there's no need to turn it on.
+ */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ if (is_host_enabled(musb)) {
+ deepsleep &= ~DRVVBUS_OVERRIDE;
+ } else {
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ }
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
/* reset the controller */
musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
+ /* force VBUS off */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
davinci_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
musb_save_toggle(qh, is_in, urb);
break;
case USB_ENDPOINT_XFER_ISOC:
- if (urb->error_count)
+ if (status == 0 && urb->error_count)
status = -EXDEV;
break;
}
static int musb_bus_suspend(struct usb_hcd *hcd)
{
struct musb *musb = hcd_to_musb(hcd);
+ u8 devctl;
- if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+ if (!is_host_active(musb))
return 0;
- if (is_host_active(musb) && musb->is_active) {
- WARNING("trying to suspend as %s is_active=%i\n",
- otg_state_string(musb), musb->is_active);
+ switch (musb->xceiv->state) {
+ case OTG_STATE_A_SUSPEND:
+ return 0;
+ case OTG_STATE_A_WAIT_VRISE:
+ /* ID could be grounded even if there's no device
+ * on the other end of the cable. NOTE that the
+ * A_WAIT_VRISE timers are messy with MUSB...
+ */
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ break;
+ default:
+ break;
+ }
+
+ if (musb->is_active) {
+ WARNING("trying to suspend as %s while active\n",
+ otg_state_string(musb));
return -EBUSY;
} else
return 0;
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
-config USB_LANGWELL_OTG
- tristate "Intel Langwell USB OTG dual-role support"
- depends on USB && MRST
- select USB_OTG
- select USB_OTG_UTILS
- help
- Say Y here if you want to build Intel Langwell USB OTG
- transciever driver in kernel. This driver implements role
- switch between EHCI host driver and Langwell USB OTG
- client driver.
-
- To compile this driver as a module, choose M here: the
- module will be called langwell_otg.
-
endif # USB || OTG
obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
+++ /dev/null
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/notifier.h>
-#include <asm/ipc_defs.h>
-#include <linux/delay.h>
-#include "../core/hcd.h"
-
-#include <linux/usb/langwell_otg.h>
-
-#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver"
-#define DRIVER_VERSION "3.0.0.32L.0002"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "langwell_otg";
-
-static int langwell_otg_probe(struct pci_dev *pdev,
- const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
- struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
- struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-
-static const struct pci_device_id pci_ids[] = {{
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = 0x8086,
- .device = 0x0811,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-static struct pci_driver otg_pci_driver = {
- .name = (char *) driver_name,
- .id_table = pci_ids,
-
- .probe = langwell_otg_probe,
- .remove = langwell_otg_remove,
-
- .suspend = langwell_otg_suspend,
- .resume = langwell_otg_resume,
-};
-
-static const char *state_string(enum usb_otg_state state)
-{
- switch (state) {
- case OTG_STATE_A_IDLE:
- return "a_idle";
- case OTG_STATE_A_WAIT_VRISE:
- return "a_wait_vrise";
- case OTG_STATE_A_WAIT_BCON:
- return "a_wait_bcon";
- case OTG_STATE_A_HOST:
- return "a_host";
- case OTG_STATE_A_SUSPEND:
- return "a_suspend";
- case OTG_STATE_A_PERIPHERAL:
- return "a_peripheral";
- case OTG_STATE_A_WAIT_VFALL:
- return "a_wait_vfall";
- case OTG_STATE_A_VBUS_ERR:
- return "a_vbus_err";
- case OTG_STATE_B_IDLE:
- return "b_idle";
- case OTG_STATE_B_SRP_INIT:
- return "b_srp_init";
- case OTG_STATE_B_PERIPHERAL:
- return "b_peripheral";
- case OTG_STATE_B_WAIT_ACON:
- return "b_wait_acon";
- case OTG_STATE_B_HOST:
- return "b_host";
- default:
- return "UNDEFINED";
- }
-}
-
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
- struct langwell_otg_timer *timer;
- timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
- timer->function = function;
- timer->expires = expires;
- timer->data = data;
- return timer;
-}
-
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
- *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
- *b_bus_suspend_tmr;
-
-static struct list_head active_timers;
-
-static struct langwell_otg *the_transceiver;
-
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver()
-{
- otg_dbg("transceiver driver is notified\n");
- queue_work(the_transceiver->qwork, &the_transceiver->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
- struct usb_bus *host)
-{
- otg->host = host;
-
- return 0;
-}
-
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
- struct usb_gadget *gadget)
-{
- otg->gadget = gadget;
-
- return 0;
-}
-
-static int langwell_otg_set_power(struct otg_transceiver *otg,
- unsigned mA)
-{
- return 0;
-}
-
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
-static void langwell_otg_drv_vbus(int on)
-{
- struct ipc_pmic_reg_data pmic_data = {0};
- struct ipc_pmic_reg_data battery_data;
-
- /* Check if battery is attached or not */
- battery_data.pmic_reg_data[0].register_address = 0xd2;
- battery_data.ioc = 0;
- battery_data.num_entries = 1;
- if (ipc_pmic_register_read(&battery_data)) {
- otg_dbg("Failed to read PMIC register 0xd2.\n");
- return;
- }
-
- if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
- otg_dbg("no battery attached\n");
- return;
- }
-
- /* Workaround for battery attachment issue */
- if (battery_data.pmic_reg_data[0].value == 0x34) {
- otg_dbg("battery \n");
- return;
- }
-
- otg_dbg("battery attached\n");
-
- pmic_data.ioc = 0;
- pmic_data.pmic_reg_data[0].register_address = 0xD4;
- pmic_data.num_entries = 1;
- if (on)
- pmic_data.pmic_reg_data[0].value = 0x20;
- else
- pmic_data.pmic_reg_data[0].value = 0xc0;
-
- if (ipc_pmic_register_write(&pmic_data, TRUE))
- otg_dbg("Failed to write PMIC.\n");
-
-}
-
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-
- u32 val;
-
- val = readl(the_transceiver->regs + CI_OTGSC);
-
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
- the_transceiver->regs + CI_OTGSC);
-
-}
-
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
- u32 val;
-
- otg_dbg("Start SRP ->\n");
-
- val = readl(the_transceiver->regs + CI_OTGSC);
-
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
- the_transceiver->regs + CI_OTGSC);
-
- /* Check if the data plus is finished or not */
- msleep(8);
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (val & (OTGSC_HADP | OTGSC_DP))
- otg_dbg("DataLine SRP Error\n");
-
- /* FIXME: VBus SRP */
-
- return 0;
-}
-
-
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
- struct usb_hcd *hcd;
- int err;
-
- otg_dbg("loc_sof -> %d\n", on);
-
- hcd = bus_to_hcd(the_transceiver->otg.host);
- if (on)
- err = hcd->driver->bus_resume(hcd);
- else
- err = hcd->driver->bus_suspend(hcd);
-
- if (err)
- otg_dbg("Failed to resume/suspend bus - %d\n", err);
-}
-
-static void langwell_otg_phy_low_power(int on)
-{
- u32 val;
-
- otg_dbg("phy low power mode-> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_HOSTPC1);
- if (on)
- writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
- else
- writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
-}
-
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
- u32 val;
-
- otg_dbg("interrupt -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on) {
- val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
- writel(val, the_transceiver->regs + CI_OTGSC);
- } else {
- val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
- writel(val, the_transceiver->regs + CI_OTGSC);
- }
-}
-
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
- u32 val;
-
- otg_dbg("HAAR -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
- the_transceiver->regs + CI_OTGSC);
-}
-
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
- u32 val;
-
- otg_dbg("HABA -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
- the_transceiver->regs + CI_OTGSC);
-}
-
-static int langwell_otg_check_se0_srp(int on)
-{
- u32 val;
-
- int delay_time = TB_SE0_SRP * 10; /* step is 100us */
-
- otg_dbg("check_se0_srp -> \n");
-
- do {
- udelay(100);
- if (!delay_time--)
- break;
- val = readl(the_transceiver->regs + CI_PORTSC1);
- val &= PORTSC_LS;
- } while (!val);
-
- otg_dbg("check_se0_srp <- \n");
- return val;
-}
-
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
- *(int *)indicator = 1;
-}
-
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
- switch (indicator) {
- case 2:
- case 4:
- case 6:
- case 7:
- printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
- indicator);
- break;
- case 3:
- printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
- indicator);
- break;
- default:
- printk(KERN_ERR "Do not have this kind of NSF\n");
- break;
- }
-}
-
-/* Initialize timers */
-static void langwell_otg_init_timers(struct otg_hsm *hsm)
-{
- /* HSM used timers */
- a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
- (unsigned long)&hsm->a_wait_vrise_tmout);
- a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
- (unsigned long)&hsm->a_wait_bcon_tmout);
- a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
- (unsigned long)&hsm->a_aidl_bdis_tmout);
- b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
- (unsigned long)&hsm->b_ase0_brst_tmout);
- b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
- (unsigned long)&hsm->b_se0_srp);
- b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
- (unsigned long)&hsm->b_srp_res_tmout);
- b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
- (unsigned long)&hsm->b_bus_suspend_tmout);
-}
-
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
- kfree(a_wait_vrise_tmr);
- kfree(a_wait_bcon_tmr);
- kfree(a_aidl_bdis_tmr);
- kfree(b_ase0_brst_tmr);
- kfree(b_se0_srp_tmr);
- kfree(b_srp_res_tmr);
- kfree(b_bus_suspend_tmr);
-}
-
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
- struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
- struct langwell_otg_timer *tmp_timer;
- u32 val32;
-
- /* Check if the timer is already in the active list,
- * if so update timer count
- */
- list_for_each_entry(tmp_timer, &active_timers, list)
- if (tmp_timer == timer) {
- timer->count = timer->expires;
- return;
- }
- timer->count = timer->expires;
-
- if (list_empty(&active_timers)) {
- val32 = readl(the_transceiver->regs + CI_OTGSC);
- writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
- }
-
- list_add_tail(&timer->list, &active_timers);
-}
-
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
- struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
- struct langwell_otg_timer *tmp_timer, *del_tmp;
- u32 val32;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
- if (tmp_timer == timer)
- list_del(&timer->list);
-
- if (list_empty(&active_timers)) {
- val32 = readl(the_transceiver->regs + CI_OTGSC);
- writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
- }
-}
-
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
- struct langwell_otg_timer *tmp_timer, *del_tmp;
- int expired = 0;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
- tmp_timer->count--;
- /* check if timer expires */
- if (!tmp_timer->count) {
- list_del(&tmp_timer->list);
- tmp_timer->function(tmp_timer->data);
- expired = 1;
- }
- }
-
- if (list_empty(&active_timers)) {
- otg_dbg("tick timer: disable 1ms int\n");
- *int_sts = *int_sts & ~OTGSC_1MSE;
- }
- return expired;
-}
-
-static void reset_otg(void)
-{
- u32 val;
- int delay_time = 1000;
-
- otg_dbg("reseting OTG controller ...\n");
- val = readl(the_transceiver->regs + CI_USBCMD);
- writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
- do {
- udelay(100);
- if (!delay_time--)
- otg_dbg("reset timeout\n");
- val = readl(the_transceiver->regs + CI_USBCMD);
- val &= USBCMD_RST;
- } while (val != 0);
- otg_dbg("reset done.\n");
-}
-
-static void set_host_mode(void)
-{
- u32 val;
-
- reset_otg();
- val = readl(the_transceiver->regs + CI_USBMODE);
- val = (val & (~USBMODE_CM)) | USBMODE_HOST;
- writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void set_client_mode(void)
-{
- u32 val;
-
- reset_otg();
- val = readl(the_transceiver->regs + CI_USBMODE);
- val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
- writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void init_hsm(void)
-{
- struct langwell_otg *langwell = the_transceiver;
- u32 val32;
-
- /* read OTGSC after reset */
- val32 = readl(langwell->regs + CI_OTGSC);
- otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
-
- /* set init state */
- if (val32 & OTGSC_ID) {
- langwell->hsm.id = 1;
- langwell->otg.default_a = 0;
- set_client_mode();
- langwell->otg.state = OTG_STATE_B_IDLE;
- langwell_otg_drv_vbus(0);
- } else {
- langwell->hsm.id = 0;
- langwell->otg.default_a = 1;
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- }
-
- /* set session indicator */
- if (val32 & OTGSC_BSE)
- langwell->hsm.b_sess_end = 1;
- if (val32 & OTGSC_BSV)
- langwell->hsm.b_sess_vld = 1;
- if (val32 & OTGSC_ASV)
- langwell->hsm.a_sess_vld = 1;
- if (val32 & OTGSC_AVV)
- langwell->hsm.a_vbus_vld = 1;
-
- /* defautly power the bus */
- langwell->hsm.a_bus_req = 1;
- langwell->hsm.a_bus_drop = 0;
- /* defautly don't request bus as B device */
- langwell->hsm.b_bus_req = 0;
- /* no system error */
- langwell->hsm.a_clr_err = 0;
-}
-
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
- void __iomem *reg_base = _dev;
- u32 val;
- u32 int_mask = 0;
-
- val = readl(reg_base + CI_USBMODE);
- if ((val & USBMODE_CM) != USBMODE_DEVICE)
- return IRQ_NONE;
-
- val = readl(reg_base + CI_USBSTS);
- int_mask = val & INTR_DUMMY_MASK;
-
- if (int_mask == 0)
- return IRQ_NONE;
-
- /* clear hsm.b_conn here since host driver can't detect it
- * otg_dummy_irq called means B-disconnect happened.
- */
- if (the_transceiver->hsm.b_conn) {
- the_transceiver->hsm.b_conn = 0;
- if (spin_trylock(&the_transceiver->wq_lock)) {
- queue_work(the_transceiver->qwork,
- &the_transceiver->work);
- spin_unlock(&the_transceiver->wq_lock);
- }
- }
- /* Clear interrupts */
- writel(int_mask, reg_base + CI_USBSTS);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
- struct langwell_otg *langwell = _dev;
- u32 int_sts, int_en;
- u32 int_mask = 0;
- int flag = 0;
-
- int_sts = readl(langwell->regs + CI_OTGSC);
- int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
- int_mask = int_sts & int_en;
- if (int_mask == 0)
- return IRQ_NONE;
-
- if (int_mask & OTGSC_IDIS) {
- otg_dbg("%s: id change int\n", __func__);
- langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_DPIS) {
- otg_dbg("%s: data pulse int\n", __func__);
- langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_BSEIS) {
- otg_dbg("%s: b session end int\n", __func__);
- langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_BSVIS) {
- otg_dbg("%s: b session valid int\n", __func__);
- langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_ASVIS) {
- otg_dbg("%s: a session valid int\n", __func__);
- langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_AVVIS) {
- otg_dbg("%s: a vbus valid int\n", __func__);
- langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
- flag = 1;
- }
-
- if (int_mask & OTGSC_1MSS) {
- /* need to schedule otg_work if any timer is expired */
- if (langwell_otg_tick_timer(&int_sts))
- flag = 1;
- }
-
- writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
- langwell->regs + CI_OTGSC);
- if (flag)
- queue_work(langwell->qwork, &langwell->work);
-
- return IRQ_HANDLED;
-}
-
-static void langwell_otg_work(struct work_struct *work)
-{
- struct langwell_otg *langwell = container_of(work,
- struct langwell_otg, work);
- int retval;
-
- otg_dbg("%s: old state = %s\n", __func__,
- state_string(langwell->otg.state));
-
- switch (langwell->otg.state) {
- case OTG_STATE_UNDEFINED:
- case OTG_STATE_B_IDLE:
- if (!langwell->hsm.id) {
- langwell_otg_del_timer(b_srp_res_tmr);
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_chrg_vbus(0);
- langwell_otg_drv_vbus(0);
-
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.b_srp_res_tmout) {
- langwell->hsm.b_srp_res_tmout = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_nsf_msg(6);
- } else if (langwell->hsm.b_sess_vld) {
- langwell_otg_del_timer(b_srp_res_tmr);
- langwell->hsm.b_sess_end = 0;
- langwell->hsm.a_bus_suspend = 0;
-
- langwell_otg_chrg_vbus(0);
- if (langwell->client_ops) {
- langwell->client_ops->resume(langwell->pdev);
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- } else
- otg_dbg("client driver not loaded.\n");
-
- } else if (langwell->hsm.b_bus_req &&
- (langwell->hsm.b_sess_end)) {
- /* workaround for b_se0_srp detection */
- retval = langwell_otg_check_se0_srp(0);
- if (retval) {
- langwell->hsm.b_bus_req = 0;
- otg_dbg("LS is not SE0, try again later\n");
- } else {
- /* Start SRP */
- langwell_otg_start_srp(&langwell->otg);
- langwell_otg_add_timer(b_srp_res_tmr);
- }
- }
- break;
- case OTG_STATE_B_SRP_INIT:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
-
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.b_sess_vld) {
- langwell_otg_chrg_vbus(0);
- if (langwell->client_ops) {
- langwell->client_ops->resume(langwell->pdev);
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- } else
- otg_dbg("client driver not loaded.\n");
- }
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell->hsm.b_hnp_enable = 0;
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
- && langwell->hsm.a_bus_suspend) {
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell_otg_HAAR(1);
- langwell->hsm.a_conn = 0;
-
- if (langwell->host_ops) {
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- langwell->otg.state = OTG_STATE_B_WAIT_ACON;
- } else
- otg_dbg("host driver not loaded.\n");
-
- langwell->hsm.a_bus_resume = 0;
- langwell->hsm.b_ase0_brst_tmout = 0;
- langwell_otg_add_timer(b_ase0_brst_tmr);
- }
- break;
-
- case OTG_STATE_B_WAIT_ACON:
- if (!langwell->hsm.id) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
-
- langwell_otg_HAAR(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell->hsm.b_hnp_enable = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_chrg_vbus(0);
- langwell_otg_HAAR(0);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.a_conn) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- langwell->otg.state = OTG_STATE_B_HOST;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_resume ||
- langwell->hsm.b_ase0_brst_tmout) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- langwell_otg_nsf_msg(7);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.a_bus_suspend = 0;
- langwell->hsm.b_bus_req = 0;
-
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- }
- break;
-
- case OTG_STATE_B_HOST:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell->hsm.b_hnp_enable = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_chrg_vbus(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if ((!langwell->hsm.b_bus_req) ||
- (!langwell->hsm.a_conn)) {
- langwell->hsm.b_bus_req = 0;
- langwell_otg_loc_sof(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.a_bus_suspend = 0;
-
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- }
- break;
-
- case OTG_STATE_A_IDLE:
- langwell->otg.default_a = 1;
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
-
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_sess_vld) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_srp_det = 1;
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_bus_drop &&
- (langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- queue_work(langwell->qwork, &langwell->work);
- }
- break;
- case OTG_STATE_A_WAIT_VRISE:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_wait_vrise_tmr);
- langwell->hsm.b_bus_req = 0;
- langwell->otg.default_a = 0;
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_wait_vrise_tmr);
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.b_conn = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else if (langwell->hsm.a_wait_vrise_tmout) {
- if (langwell->hsm.a_vbus_vld) {
- if (langwell->host_ops)
- langwell->host_ops->probe(
- langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.b_conn = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else {
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- }
- }
- break;
- case OTG_STATE_A_WAIT_BCON:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_bus_drop ||
- (langwell->hsm.a_wait_bcon_tmout &&
- !langwell->hsm.a_bus_req)) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (langwell->hsm.b_conn) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- langwell->hsm.a_suspend_req = 0;
- langwell->otg.state = OTG_STATE_A_HOST;
- if (!langwell->hsm.a_bus_req &&
- langwell->hsm.a_set_b_hnp_en) {
- /* It is not safe enough to do a fast
- * transistion from A_WAIT_BCON to
- * A_SUSPEND */
- msleep(10000);
- if (langwell->hsm.a_bus_req)
- break;
-
- if (request_irq(langwell->pdev->irq,
- otg_dummy_irq, IRQF_SHARED,
- driver_name, langwell->regs) != 0) {
- otg_dbg("request interrupt %d fail\n",
- langwell->pdev->irq);
- }
-
- langwell_otg_HABA(1);
- langwell->hsm.b_bus_resume = 0;
- langwell->hsm.a_aidl_bdis_tmout = 0;
- langwell_otg_add_timer(a_aidl_bdis_tmr);
-
- langwell_otg_loc_sof(0);
- langwell->otg.state = OTG_STATE_A_SUSPEND;
- } else if (!langwell->hsm.a_bus_req &&
- !langwell->hsm.a_set_b_hnp_en) {
- struct pci_dev *pdev = langwell->pdev;
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- }
- }
- break;
- case OTG_STATE_A_HOST:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_drop ||
- (!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (!langwell->hsm.a_vbus_vld) {
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_set_b_hnp_en
- && !langwell->hsm.a_bus_req) {
- /* Set HABA to enable hardware assistance to signal
- * A-connect after receiver B-disconnect. Hardware
- * will then set client mode and enable URE, SLE and
- * PCE after the assistance. otg_dummy_irq is used to
- * clean these ints when client driver is not resumed.
- */
- if (request_irq(langwell->pdev->irq,
- otg_dummy_irq, IRQF_SHARED, driver_name,
- langwell->regs) != 0) {
- otg_dbg("request interrupt %d failed\n",
- langwell->pdev->irq);
- }
-
- /* set HABA */
- langwell_otg_HABA(1);
- langwell->hsm.b_bus_resume = 0;
- langwell->hsm.a_aidl_bdis_tmout = 0;
- langwell_otg_add_timer(a_aidl_bdis_tmr);
- langwell_otg_loc_sof(0);
- langwell->otg.state = OTG_STATE_A_SUSPEND;
- } else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- }
- break;
- case OTG_STATE_A_SUSPEND:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_req ||
- langwell->hsm.b_bus_resume) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- langwell->hsm.a_suspend_req = 0;
- langwell_otg_loc_sof(1);
- langwell->otg.state = OTG_STATE_A_HOST;
- } else if (langwell->hsm.a_aidl_bdis_tmout ||
- langwell->hsm.a_bus_drop) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (!langwell->hsm.b_conn &&
- langwell->hsm.a_set_b_hnp_en) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.b_bus_suspend = 0;
- langwell->hsm.b_bus_suspend_vld = 0;
- langwell->hsm.b_bus_suspend_tmout = 0;
-
- /* msleep(200); */
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell_otg_add_timer(b_bus_suspend_tmr);
- langwell->otg.state = OTG_STATE_A_PERIPHERAL;
- break;
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- }
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_bus_drop) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (langwell->hsm.b_bus_suspend) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
-
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else if (langwell->hsm.b_bus_suspend_tmout) {
- u32 val;
- val = readl(langwell->regs + CI_PORTSC1);
- if (!(val & PORTSC_SUSP))
- break;
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- }
- break;
- case OTG_STATE_A_VBUS_ERR:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.a_clr_err = 0;
- langwell->hsm.a_srp_det = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_clr_err) {
- langwell->hsm.a_clr_err = 0;
- langwell->hsm.a_srp_det = 0;
- reset_otg();
- init_hsm();
- if (langwell->otg.state == OTG_STATE_A_IDLE)
- queue_work(langwell->qwork, &langwell->work);
- }
- break;
- case OTG_STATE_A_WAIT_VFALL:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_req) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- } else if (!langwell->hsm.a_sess_vld) {
- langwell->hsm.a_srp_det = 0;
- langwell_otg_drv_vbus(0);
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- }
- break;
- default:
- ;
- }
-
- otg_dbg("%s: new state = %s\n", __func__,
- state_string(langwell->otg.state));
-}
-
- static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size,
- "\n"
- "USBCMD = 0x%08x \n"
- "USBSTS = 0x%08x \n"
- "USBINTR = 0x%08x \n"
- "ASYNCLISTADDR = 0x%08x \n"
- "PORTSC1 = 0x%08x \n"
- "HOSTPC1 = 0x%08x \n"
- "OTGSC = 0x%08x \n"
- "USBMODE = 0x%08x \n",
- readl(langwell->regs + 0x30),
- readl(langwell->regs + 0x34),
- readl(langwell->regs + 0x38),
- readl(langwell->regs + 0x48),
- readl(langwell->regs + 0x74),
- readl(langwell->regs + 0xb4),
- readl(langwell->regs + 0xf4),
- readl(langwell->regs + 0xf8)
- );
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size,
- "\n"
- "current state = %s\n"
- "a_bus_resume = \t%d\n"
- "a_bus_suspend = \t%d\n"
- "a_conn = \t%d\n"
- "a_sess_vld = \t%d\n"
- "a_srp_det = \t%d\n"
- "a_vbus_vld = \t%d\n"
- "b_bus_resume = \t%d\n"
- "b_bus_suspend = \t%d\n"
- "b_conn = \t%d\n"
- "b_se0_srp = \t%d\n"
- "b_sess_end = \t%d\n"
- "b_sess_vld = \t%d\n"
- "id = \t%d\n"
- "a_set_b_hnp_en = \t%d\n"
- "b_srp_done = \t%d\n"
- "b_hnp_enable = \t%d\n"
- "a_wait_vrise_tmout = \t%d\n"
- "a_wait_bcon_tmout = \t%d\n"
- "a_aidl_bdis_tmout = \t%d\n"
- "b_ase0_brst_tmout = \t%d\n"
- "a_bus_drop = \t%d\n"
- "a_bus_req = \t%d\n"
- "a_clr_err = \t%d\n"
- "a_suspend_req = \t%d\n"
- "b_bus_req = \t%d\n"
- "b_bus_suspend_tmout = \t%d\n"
- "b_bus_suspend_vld = \t%d\n",
- state_string(langwell->otg.state),
- langwell->hsm.a_bus_resume,
- langwell->hsm.a_bus_suspend,
- langwell->hsm.a_conn,
- langwell->hsm.a_sess_vld,
- langwell->hsm.a_srp_det,
- langwell->hsm.a_vbus_vld,
- langwell->hsm.b_bus_resume,
- langwell->hsm.b_bus_suspend,
- langwell->hsm.b_conn,
- langwell->hsm.b_se0_srp,
- langwell->hsm.b_sess_end,
- langwell->hsm.b_sess_vld,
- langwell->hsm.id,
- langwell->hsm.a_set_b_hnp_en,
- langwell->hsm.b_srp_done,
- langwell->hsm.b_hnp_enable,
- langwell->hsm.a_wait_vrise_tmout,
- langwell->hsm.a_wait_bcon_tmout,
- langwell->hsm.a_aidl_bdis_tmout,
- langwell->hsm.b_ase0_brst_tmout,
- langwell->hsm.a_bus_drop,
- langwell->hsm.a_bus_req,
- langwell->hsm.a_clr_err,
- langwell->hsm.a_suspend_req,
- langwell->hsm.b_bus_req,
- langwell->hsm.b_bus_suspend_tmout,
- langwell->hsm.b_bus_suspend_vld
- );
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.a_bus_req = 0;
- otg_dbg("a_bus_req = 0\n");
- } else if (buf[0] == '1') {
- /* If a_bus_drop is TRUE, a_bus_req can't be set */
- if (langwell->hsm.a_bus_drop)
- return -1;
- langwell->hsm.a_bus_req = 1;
- otg_dbg("a_bus_req = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
-
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.a_bus_drop = 0;
- otg_dbg("a_bus_drop = 0\n");
- } else if (buf[0] == '1') {
- langwell->hsm.a_bus_drop = 1;
- langwell->hsm.a_bus_req = 0;
- otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
- get_a_bus_drop, set_a_bus_drop);
-
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
-
- if (langwell->otg.default_a)
- return -1;
-
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.b_bus_req = 0;
- otg_dbg("b_bus_req = 0\n");
- } else if (buf[0] == '1') {
- langwell->hsm.b_bus_req = 1;
- otg_dbg("b_bus_req = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
-
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
-
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '1') {
- langwell->hsm.a_clr_err = 1;
- otg_dbg("a_clr_err = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
-
-static struct attribute *inputs_attrs[] = {
- &dev_attr_a_bus_req.attr,
- &dev_attr_a_bus_drop.attr,
- &dev_attr_b_bus_req.attr,
- &dev_attr_a_clr_err.attr,
- NULL,
-};
-
-static struct attribute_group debug_dev_attr_group = {
- .name = "inputs",
- .attrs = inputs_attrs,
-};
-
-int langwell_register_host(struct pci_driver *host_driver)
-{
- int ret = 0;
-
- the_transceiver->host_ops = host_driver;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("host controller driver is registered\n");
-
- return ret;
-}
-EXPORT_SYMBOL(langwell_register_host);
-
-void langwell_unregister_host(struct pci_driver *host_driver)
-{
- if (the_transceiver->host_ops)
- the_transceiver->host_ops->remove(the_transceiver->pdev);
- the_transceiver->host_ops = NULL;
- the_transceiver->hsm.a_bus_drop = 1;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("host controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_host);
-
-int langwell_register_peripheral(struct pci_driver *client_driver)
-{
- int ret = 0;
-
- if (client_driver)
- ret = client_driver->probe(the_transceiver->pdev,
- client_driver->id_table);
- if (!ret) {
- the_transceiver->client_ops = client_driver;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("client controller driver is registered\n");
- }
-
- return ret;
-}
-EXPORT_SYMBOL(langwell_register_peripheral);
-
-void langwell_unregister_peripheral(struct pci_driver *client_driver)
-{
- if (the_transceiver->client_ops)
- the_transceiver->client_ops->remove(the_transceiver->pdev);
- the_transceiver->client_ops = NULL;
- the_transceiver->hsm.b_bus_req = 0;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("client controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_peripheral);
-
-static int langwell_otg_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- unsigned long resource, len;
- void __iomem *base = NULL;
- int retval;
- u32 val32;
- struct langwell_otg *langwell;
- char qname[] = "langwell_otg_queue";
-
- retval = 0;
- otg_dbg("\notg controller is detected.\n");
- if (pci_enable_device(pdev) < 0) {
- retval = -ENODEV;
- goto done;
- }
-
- langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
- if (langwell == NULL) {
- retval = -ENOMEM;
- goto done;
- }
- the_transceiver = langwell;
-
- /* control register: BAR 0 */
- resource = pci_resource_start(pdev, 0);
- len = pci_resource_len(pdev, 0);
- if (!request_mem_region(resource, len, driver_name)) {
- retval = -EBUSY;
- goto err;
- }
- langwell->region = 1;
-
- base = ioremap_nocache(resource, len);
- if (base == NULL) {
- retval = -EFAULT;
- goto err;
- }
- langwell->regs = base;
-
- if (!pdev->irq) {
- otg_dbg("No IRQ.\n");
- retval = -ENODEV;
- goto err;
- }
-
- langwell->qwork = create_workqueue(qname);
- if (!langwell->qwork) {
- otg_dbg("cannot create workqueue %s\n", qname);
- retval = -ENOMEM;
- goto err;
- }
- INIT_WORK(&langwell->work, langwell_otg_work);
-
- /* OTG common part */
- langwell->pdev = pdev;
- langwell->otg.dev = &pdev->dev;
- langwell->otg.label = driver_name;
- langwell->otg.set_host = langwell_otg_set_host;
- langwell->otg.set_peripheral = langwell_otg_set_peripheral;
- langwell->otg.set_power = langwell_otg_set_power;
- langwell->otg.start_srp = langwell_otg_start_srp;
- langwell->otg.state = OTG_STATE_UNDEFINED;
- if (otg_set_transceiver(&langwell->otg)) {
- otg_dbg("can't set transceiver\n");
- retval = -EBUSY;
- goto err;
- }
-
- reset_otg();
- init_hsm();
-
- spin_lock_init(&langwell->lock);
- spin_lock_init(&langwell->wq_lock);
- INIT_LIST_HEAD(&active_timers);
- langwell_otg_init_timers(&langwell->hsm);
-
- if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
- driver_name, langwell) != 0) {
- otg_dbg("request interrupt %d failed\n", pdev->irq);
- retval = -EBUSY;
- goto err;
- }
-
- /* enable OTGSC int */
- val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
- OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
- writel(val32, langwell->regs + CI_OTGSC);
-
- retval = device_create_file(&pdev->dev, &dev_attr_registers);
- if (retval < 0) {
- otg_dbg("Can't register sysfs attribute: %d\n", retval);
- goto err;
- }
-
- retval = device_create_file(&pdev->dev, &dev_attr_hsm);
- if (retval < 0) {
- otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
- goto err;
- }
-
- retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
- if (retval < 0) {
- otg_dbg("Can't register sysfs attr group: %d\n", retval);
- goto err;
- }
-
- if (langwell->otg.state == OTG_STATE_A_IDLE)
- queue_work(langwell->qwork, &langwell->work);
-
- return 0;
-
-err:
- if (the_transceiver)
- langwell_otg_remove(pdev);
-done:
- return retval;
-}
-
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- if (langwell->qwork) {
- flush_workqueue(langwell->qwork);
- destroy_workqueue(langwell->qwork);
- }
- langwell_otg_free_timers();
-
- /* disable OTGSC interrupt as OTGSC doesn't change in reset */
- writel(0, langwell->regs + CI_OTGSC);
-
- if (pdev->irq)
- free_irq(pdev->irq, langwell);
- if (langwell->regs)
- iounmap(langwell->regs);
- if (langwell->region)
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
-
- otg_set_transceiver(NULL);
- pci_disable_device(pdev);
- sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
- device_remove_file(&pdev->dev, &dev_attr_hsm);
- device_remove_file(&pdev->dev, &dev_attr_registers);
- kfree(langwell);
- langwell = NULL;
-}
-
-static void transceiver_suspend(struct pci_dev *pdev)
-{
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
- langwell_otg_phy_low_power(1);
-}
-
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
- int ret = 0;
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- /* Disbale OTG interrupts */
- langwell_otg_intr(0);
-
- if (pdev->irq)
- free_irq(pdev->irq, langwell);
-
- /* Prevent more otg_work */
- flush_workqueue(langwell->qwork);
- spin_lock(&langwell->wq_lock);
-
- /* start actions */
- switch (langwell->otg.state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_B_IDLE:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_VBUS_ERR:
- transceiver_suspend(pdev);
- break;
- case OTG_STATE_A_WAIT_VRISE:
- langwell_otg_del_timer(a_wait_vrise_tmr);
- langwell->hsm.a_srp_det = 0;
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_IDLE;
- transceiver_suspend(pdev);
- break;
- case OTG_STATE_A_WAIT_BCON:
- langwell_otg_del_timer(a_wait_bcon_tmr);
- if (langwell->host_ops)
- ret = langwell->host_ops->suspend(pdev, message);
- langwell_otg_drv_vbus(0);
- break;
- case OTG_STATE_A_HOST:
- if (langwell->host_ops)
- ret = langwell->host_ops->suspend(pdev, message);
- langwell_otg_drv_vbus(0);
- langwell_otg_phy_low_power(1);
- break;
- case OTG_STATE_A_SUSPEND:
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->suspend(pdev, message);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- break;
- case OTG_STATE_B_HOST:
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->hsm.b_bus_req = 0;
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_B_IDLE;
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->suspend(pdev, message);
- else
- otg_dbg("client driver has been removed.\n");
- break;
- case OTG_STATE_B_WAIT_ACON:
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->hsm.b_bus_req = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- transceiver_suspend(pdev);
- break;
- default:
- otg_dbg("error state before suspend\n ");
- break;
- }
- spin_unlock(&langwell->wq_lock);
-
- return ret;
-}
-
-static void transceiver_resume(struct pci_dev *pdev)
-{
- pci_restore_state(pdev);
- pci_set_power_state(pdev, PCI_D0);
- langwell_otg_phy_low_power(0);
-}
-
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
- int ret = 0;
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- spin_lock(&langwell->wq_lock);
-
- switch (langwell->otg.state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_B_IDLE:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_VBUS_ERR:
- transceiver_resume(pdev);
- break;
- case OTG_STATE_A_WAIT_BCON:
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell_otg_drv_vbus(1);
- if (langwell->host_ops)
- ret = langwell->host_ops->resume(pdev);
- break;
- case OTG_STATE_A_HOST:
- langwell_otg_drv_vbus(1);
- langwell_otg_phy_low_power(0);
- if (langwell->host_ops)
- ret = langwell->host_ops->resume(pdev);
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->resume(pdev);
- else
- otg_dbg("client driver not loaded.\n");
- break;
- default:
- otg_dbg("error state before suspend\n ");
- break;
- }
-
- if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
- driver_name, the_transceiver) != 0) {
- otg_dbg("request interrupt %d failed\n", pdev->irq);
- ret = -EBUSY;
- }
-
- /* enable OTG interrupts */
- langwell_otg_intr(1);
-
- spin_unlock(&langwell->wq_lock);
-
- queue_work(langwell->qwork, &langwell->work);
-
-
- return ret;
-}
-
-static int __init langwell_otg_init(void)
-{
- return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-
-static void __exit langwell_otg_cleanup(void)
-{
- pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
void usb_nop_xceiv_unregister(void)
{
platform_device_unregister(pd);
+ pd = NULL;
}
EXPORT_SYMBOL(usb_nop_xceiv_unregister);
kfree(tty);
}
}
- /* So we know not to kill the hardware on a hangup on this
- port. We have also bumped the use count by one so it won't go
- idle */
+ /* Now that any required fake tty operations are completed restore
+ * the tty port count */
+ --port->port.count;
+ /* The console is special in terms of closing the device so
+ * indicate this port is now acting as a system console. */
port->console = 1;
retval = 0;
dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- if (!port->port.count) {
+ if (!port->console) {
dbg("%s - port not opened", __func__);
return;
}
{
if (usbcons_info.port) {
unregister_console(&usbcons);
- if (usbcons_info.port->port.count)
- usbcons_info.port->port.count--;
+ usbcons_info.port->console = 0;
usbcons_info.port = NULL;
}
}
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+ { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+ { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
/* precursor to disconnect so just go away */
return;
case -EPIPE:
- usb_clear_halt(port->serial->dev, 0x81);
- break;
+ /* Can't call usb_clear_halt while in_interrupt */
+ /* FALLS THROUGH */
default:
/* something ugly is going on... */
dev_err(&urb->dev->dev,
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static int ftdi_NDI_device_setup(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
.probe = ftdi_mtxorb_hack_setup,
};
+static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+ .probe = ftdi_NDI_device_setup,
+};
+
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
- { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
{ USB_DEVICE(DE_VID, STB_PID) },
{ USB_DEVICE(DE_VID, WHT_PID) },
case FT2232C: /* FT2232C chip */
case FT232RL:
if (baud <= 3000000) {
+ __u16 product_id = le16_to_cpu(
+ port->serial->dev->descriptor.idProduct);
+ if (((FTDI_NDI_HUC_PID == product_id) ||
+ (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
+ (FTDI_NDI_FUTURE_2_PID == product_id) ||
+ (FTDI_NDI_FUTURE_3_PID == product_id) ||
+ (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+ (baud == 19200)) {
+ baud = 1200000;
+ }
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __func__);
priv->force_rtscts = 1;
} /* ftdi_HE_TIRA1_setup */
+/*
+ * Module parameter to control latency timer for NDI FTDI-based USB devices.
+ * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ */
+static int ndi_latency_timer = 1;
+
+/* Setup for the NDI FTDI-based USB devices, which requires hardwired
+ * baudrate (19200 gets mapped to 1200000).
+ *
+ * Called from usbserial:serial_probe.
+ */
+static int ftdi_NDI_device_setup(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+ int latency = ndi_latency_timer;
+ int rv = 0;
+ char buf[1];
+
+ if (latency == 0)
+ latency = 1;
+ if (latency > 99)
+ latency = 99;
+
+ dbg("%s setting NDI device latency to %d", __func__, latency);
+ dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
+
+ rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ latency, 0, buf, 0, WDR_TIMEOUT);
+ return 0;
+}
+
/*
* First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
* Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified product ID");
+module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");
*
* Armin Laeuger originally sent the PID for the UM 100 module.
*/
+#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
#define FTDI_CCSICDU20_0_PID 0xF9D0
#define FTDI_CCSICDU40_1_PID 0xF9D1
#define FTDI_CCSMACHX_2_PID 0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID 0xF9D4
+#define FTDI_CCSPRIME8_5_PID 0xF9D5
/* Inside Accesso contactless reader (http://www.insidefr.com) */
#define INSIDE_ACCESSO 0xFAD0
/* Pyramid Computer GmbH */
#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
+/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
+
/*
* Posiflex inc retail equipment (http://www.posiflex.com.tw)
*/
#define TML_VID 0x1B91 /* Vendor ID */
#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
-/* NDI Polaris System */
-#define FTDI_NDI_HUC_PID 0xDA70
-
/* Propox devices */
#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
#define MARVELL_VID 0x9e88
#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
#define NOVATELWIRELESS_PRODUCT_U727 0x5010
#define NOVATELWIRELESS_PRODUCT_MC760 0x6000
+#define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002
/* FUTURE NOVATEL PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001
#define DLINK_VENDOR_ID 0x1186
#define DLINK_PRODUCT_DWM_652 0x3e04
+#define QISDA_VENDOR_ID 0x1da5
+#define QISDA_PRODUCT_H21_4512 0x4512
+#define QISDA_PRODUCT_H21_4523 0x4523
+#define QISDA_PRODUCT_H20_4515 0x4515
+#define QISDA_PRODUCT_H20_4519 0x4519
+
/* TOSHIBA PRODUCTS */
#define TOSHIBA_VENDOR_ID 0x0930
#define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302
+#define ALINK_VENDOR_ID 0x1e0e
+#define ALINK_PRODUCT_3GU 0x9200
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
- { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
+ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
memcpy(this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
- this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
dbg("usb_submit_urb %p (write bulk) failed "
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN && status != -ENOENT) {
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
dbg("%s", __func__);
- /* Reset low level data toggle and start reading from endpoints */
+ /* Start reading from the IN endpoint */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
if (!urb)
continue;
- if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __func__,
- urb->dev, serial->dev);
- continue;
- }
-
- /*
- * make sure endpoint data toggle is synchronized with the
- * device
- */
- usb_clear_halt(urb->dev, urb->pipe);
-
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d",
}
}
- /* Reset low level data toggle on out endpoints */
- for (i = 0; i < N_OUT_URB; i++) {
- urb = portdata->out_urbs[i];
- if (!urb)
- continue;
- urb->dev = serial->dev;
- /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), 0); */
- }
-
option_send_setup(port);
return 0;
dbg("%s: No interrupt URB for port %d\n", __func__, i);
continue;
}
- port->interrupt_in_urb->dev = serial->dev;
err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
dbg("Submitted interrupt URB for port %d (result %d)", i, err);
if (err < 0) {
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ } /* Terminating entry */
};
/* Hewlett-Packard LD220-HP POS Pole Display */
#define HP_VENDOR_ID 0x03f0
#define HP_LD220_PRODUCT_ID 0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID 0x04b8
+#define CRESSI_EDY_PRODUCT_ID 0x0521
};
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+ { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
+ { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
+
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
- { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0022) }, /* Sierra Wireless EM5725 */
+ { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
+ { USB_DEVICE(0x1199, 0x0224) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
- /* Sierra Wireless C597 */
+ /* Sierra Wireless C597 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
- /* Sierra Wireless Device */
+ /* Sierra Wireless T598 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
- { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
+ { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
+ { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
+ { USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
- { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6805) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6808) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6809) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
- { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Lenovo) */
+ { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
- { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */
+ { USB_DEVICE(0x1199, 0x6816) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
+ { USB_DEVICE(0x1199, 0x6822) }, /* Sierra Wireless AirCard 875E */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x6834) }, /* Sierra Wireless MC8780 */
+ { USB_DEVICE(0x1199, 0x6835) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x6838) }, /* Sierra Wireless MC8780 */
+ { USB_DEVICE(0x1199, 0x6839) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless C22/C33 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
-
- { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
- { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
-
+ { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
return 0;
}
-static void sierra_disconnect(struct usb_serial *serial)
+static void sierra_release(struct usb_serial *serial)
{
int i;
struct usb_serial_port *port;
if (!portdata)
continue;
kfree(portdata);
- usb_set_serial_port_data(port, NULL);
}
}
.tiocmget = sierra_tiocmget,
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
- .disconnect = sierra_disconnect,
+ .release = sierra_release,
.read_int_callback = sierra_instat_callback,
};
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
- { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
u8 cs = 0;
int done;
struct ti_firmware_header *header;
- int status;
+ int status = 0;
int len;
for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
- if (port->port.count == 1) {
+ /* If the console is attached, the device is already open */
+ if (port->port.count == 1 && !port->console) {
/* lock this module before we call it
* this may fail, which means we must bail out,
result = memcmp(buffer+8, "Option", 6);
+ if (result != 0)
+ result = memcmp(buffer+8, "ZCOPTION", 8);
+
/* Read the CSW */
usb_stor_bulk_transfer_buf(us,
us->recv_bulk_pipe,
* struct usb_device_driver - identifies USB device driver to usbcore
* @name: The driver name should be unique among USB drivers,
* and should normally be the same as the module name.
- * @nodename: Callback to provide a naming hint for a possible
- * device node to create.
* @probe: Called to see if the driver is willing to manage a particular
* device. If it is, probe returns zero and uses dev_set_drvdata()
* to associate driver-specific data with the device. If unwilling
/**
* struct usb_class_driver - identifies a USB driver that wants to use the USB major number
* @name: the usb class device name for this driver. Will show up in sysfs.
+ * @nodename: Callback to provide a naming hint for a possible
+ * device node to create.
* @fops: pointer to the struct file_operations of this driver.
* @minor_base: the start of the minor range for this driver.
*
* the device driver is saying that it provided this DMA address,
* which the host controller driver should use in preference to the
* transfer_buffer.
+ * @sg: scatter gather buffer list
+ * @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
* be broken up into chunks according to the current maximum packet
* size for the endpoint, which is a function of the configuration
+++ /dev/null
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_OTG_H__
-#define __LANGWELL_OTG_H__
-
-/* notify transceiver driver about OTG events */
-extern void langwell_update_transceiver(void);
-/* HCD register bus driver */
-extern int langwell_register_host(struct pci_driver *host_driver);
-/* HCD unregister bus driver */
-extern void langwell_unregister_host(struct pci_driver *host_driver);
-/* DCD register bus driver */
-extern int langwell_register_peripheral(struct pci_driver *client_driver);
-/* DCD unregister bus driver */
-extern void langwell_unregister_peripheral(struct pci_driver *client_driver);
-/* No silent failure, output warning message */
-extern void langwell_otg_nsf_msg(unsigned long message);
-
-#define CI_USBCMD 0x30
-# define USBCMD_RST BIT(1)
-# define USBCMD_RS BIT(0)
-#define CI_USBSTS 0x34
-# define USBSTS_SLI BIT(8)
-# define USBSTS_URI BIT(6)
-# define USBSTS_PCI BIT(2)
-#define CI_PORTSC1 0x74
-# define PORTSC_PP BIT(12)
-# define PORTSC_LS (BIT(11) | BIT(10))
-# define PORTSC_SUSP BIT(7)
-# define PORTSC_CCS BIT(0)
-#define CI_HOSTPC1 0xb4
-# define HOSTPC1_PHCD BIT(22)
-#define CI_OTGSC 0xf4
-# define OTGSC_DPIE BIT(30)
-# define OTGSC_1MSE BIT(29)
-# define OTGSC_BSEIE BIT(28)
-# define OTGSC_BSVIE BIT(27)
-# define OTGSC_ASVIE BIT(26)
-# define OTGSC_AVVIE BIT(25)
-# define OTGSC_IDIE BIT(24)
-# define OTGSC_DPIS BIT(22)
-# define OTGSC_1MSS BIT(21)
-# define OTGSC_BSEIS BIT(20)
-# define OTGSC_BSVIS BIT(19)
-# define OTGSC_ASVIS BIT(18)
-# define OTGSC_AVVIS BIT(17)
-# define OTGSC_IDIS BIT(16)
-# define OTGSC_DPS BIT(14)
-# define OTGSC_1MST BIT(13)
-# define OTGSC_BSE BIT(12)
-# define OTGSC_BSV BIT(11)
-# define OTGSC_ASV BIT(10)
-# define OTGSC_AVV BIT(9)
-# define OTGSC_ID BIT(8)
-# define OTGSC_HABA BIT(7)
-# define OTGSC_HADP BIT(6)
-# define OTGSC_IDPU BIT(5)
-# define OTGSC_DP BIT(4)
-# define OTGSC_OT BIT(3)
-# define OTGSC_HAAR BIT(2)
-# define OTGSC_VC BIT(1)
-# define OTGSC_VD BIT(0)
-# define OTGSC_INTEN_MASK (0x7f << 24)
-# define OTGSC_INTSTS_MASK (0x7f << 16)
-#define CI_USBMODE 0xf8
-# define USBMODE_CM (BIT(1) | BIT(0))
-# define USBMODE_IDLE 0
-# define USBMODE_DEVICE 0x2
-# define USBMODE_HOST 0x3
-
-#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI)
-
-struct otg_hsm {
- /* Input */
- int a_bus_resume;
- int a_bus_suspend;
- int a_conn;
- int a_sess_vld;
- int a_srp_det;
- int a_vbus_vld;
- int b_bus_resume;
- int b_bus_suspend;
- int b_conn;
- int b_se0_srp;
- int b_sess_end;
- int b_sess_vld;
- int id;
-
- /* Internal variables */
- int a_set_b_hnp_en;
- int b_srp_done;
- int b_hnp_enable;
-
- /* Timeout indicator for timers */
- int a_wait_vrise_tmout;
- int a_wait_bcon_tmout;
- int a_aidl_bdis_tmout;
- int b_ase0_brst_tmout;
- int b_bus_suspend_tmout;
- int b_srp_res_tmout;
-
- /* Informative variables */
- int a_bus_drop;
- int a_bus_req;
- int a_clr_err;
- int a_suspend_req;
- int b_bus_req;
-
- /* Output */
- int drv_vbus;
- int loc_conn;
- int loc_sof;
-
- /* Others */
- int b_bus_suspend_vld;
-};
-
-#define TA_WAIT_VRISE 100
-#define TA_WAIT_BCON 30000
-#define TA_AIDL_BDIS 15000
-#define TB_ASE0_BRST 5000
-#define TB_SE0_SRP 2
-#define TB_SRP_RES 100
-#define TB_BUS_SUSPEND 500
-
-struct langwell_otg_timer {
- unsigned long expires; /* Number of count increase to timeout */
- unsigned long count; /* Tick counter */
- void (*function)(unsigned long); /* Timeout function */
- unsigned long data; /* Data passed to function */
- struct list_head list;
-};
-
-struct langwell_otg {
- struct otg_transceiver otg;
- struct otg_hsm hsm;
- void __iomem *regs;
- unsigned region;
- struct pci_driver *host_ops;
- struct pci_driver *client_ops;
- struct pci_dev *pdev;
- struct work_struct work;
- struct workqueue_struct *qwork;
- spinlock_t lock;
- spinlock_t wq_lock;
-};
-
-static inline struct langwell_otg *otg_to_langwell(struct otg_transceiver *otg)
-{
- return container_of(otg, struct langwell_otg, otg);
-}
-
-#ifdef DEBUG
-#define otg_dbg(fmt, args...) \
- printk(KERN_DEBUG fmt , ## args)
-#else
-#define otg_dbg(fmt, args...) \
- do { } while (0)
-#endif /* DEBUG */
-#endif /* __LANGWELL_OTG_H__ */
projects / mirror_ubuntu-jammy-kernel.git / commitdiff