]> git.proxmox.com Git - mirror_ubuntu-hirsute-kernel.git/commitdiff
mac80211: update mesh peering frame codes
authorThomas Pedersen <thomas@cozybit.com>
Fri, 12 Aug 2011 02:35:12 +0000 (19:35 -0700)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 22 Aug 2011 18:46:00 +0000 (14:46 -0400)
Have the mesh peering frames use the self-protected action and reason codes
specified in 802.11s and defined in ieee80211.h. Remove the local enums.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
net/mac80211/mesh_plink.c

index e4113f243fc4abbedee6741b3d75d730ffe8517a..2cf22127d3245f05c188f1846a896b64a95d8f22 100644 (file)
 #define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \
                                jiffies + HZ * t / 1000))
 
-/* Peer link cancel reasons, all subject to ANA approval */
-#define MESH_LINK_CANCELLED                    2
-#define MESH_MAX_NEIGHBORS                     3
-#define MESH_CAPABILITY_POLICY_VIOLATION       4
-#define MESH_CLOSE_RCVD                                5
-#define MESH_MAX_RETRIES                       6
-#define MESH_CONFIRM_TIMEOUT                   7
-#define MESH_SECURITY_ROLE_NEGOTIATION_DIFFERS 8
-#define MESH_SECURITY_AUTHENTICATION_IMPOSSIBLE        9
-#define MESH_SECURITY_FAILED_VERIFICATION      10
-
 #define dot11MeshMaxRetries(s) (s->u.mesh.mshcfg.dot11MeshMaxRetries)
 #define dot11MeshRetryTimeout(s) (s->u.mesh.mshcfg.dot11MeshRetryTimeout)
 #define dot11MeshConfirmTimeout(s) (s->u.mesh.mshcfg.dot11MeshConfirmTimeout)
 #define dot11MeshHoldingTimeout(s) (s->u.mesh.mshcfg.dot11MeshHoldingTimeout)
 #define dot11MeshMaxPeerLinks(s) (s->u.mesh.mshcfg.dot11MeshMaxPeerLinks)
 
-enum plink_frame_type {
-       PLINK_OPEN = 1,
-       PLINK_CONFIRM,
-       PLINK_CLOSE
-};
-
 enum plink_event {
        PLINK_UNDEFINED,
        OPN_ACPT,
@@ -157,8 +140,8 @@ void mesh_plink_deactivate(struct sta_info *sta)
 }
 
 static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
-               enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid,
-               __le16 reason) {
+               enum ieee80211_self_protected_actioncode action,
+               u8 *da, __le16 llid, __le16 plid, __le16 reason) {
        struct ieee80211_local *local = sdata->local;
        struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400 +
                        sdata->u.mesh.ie_len);
@@ -185,11 +168,11 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
        mgmt->u.action.category = WLAN_CATEGORY_MESH_ACTION;
        mgmt->u.action.u.plink_action.action_code = action;
 
-       if (action == PLINK_CLOSE)
+       if (action == WLAN_SP_MESH_PEERING_CLOSE)
                mgmt->u.action.u.plink_action.aux = reason;
        else {
                mgmt->u.action.u.plink_action.aux = cpu_to_le16(0x0);
-               if (action == PLINK_CONFIRM) {
+               if (action == WLAN_SP_MESH_PEERING_CONFIRM) {
                        pos = skb_put(skb, 4);
                        /* two-byte status code followed by two-byte AID */
                        memset(pos, 0, 2);
@@ -205,14 +188,14 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 
        /* Add Peer Link Management element */
        switch (action) {
-       case PLINK_OPEN:
+       case WLAN_SP_MESH_PEERING_OPEN:
                ie_len = 6;
                break;
-       case PLINK_CONFIRM:
+       case WLAN_SP_MESH_PEERING_CONFIRM:
                ie_len = 8;
                include_plid = true;
                break;
-       case PLINK_CLOSE:
+       case WLAN_SP_MESH_PEERING_CLOSE:
        default:
                if (!plid)
                        ie_len = 8;
@@ -233,7 +216,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
                pos += 2;
                memcpy(pos, &plid, 2);
        }
-       if (action == PLINK_CLOSE) {
+       if (action == WLAN_SP_MESH_PEERING_CLOSE) {
                pos += 2;
                memcpy(pos, &reason, 2);
        }
@@ -327,21 +310,21 @@ static void mesh_plink_timer(unsigned long data)
                        ++sta->plink_retries;
                        mod_plink_timer(sta, sta->plink_timeout);
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid,
-                                           0, 0);
+                       mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
+                                           sta->sta.addr, llid, 0, 0);
                        break;
                }
-               reason = cpu_to_le16(MESH_MAX_RETRIES);
+               reason = cpu_to_le16(WLAN_REASON_MESH_MAX_RETRIES);
                /* fall through on else */
        case NL80211_PLINK_CNF_RCVD:
                /* confirm timer */
                if (!reason)
-                       reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT);
+                       reason = cpu_to_le16(WLAN_REASON_MESH_CONFIRM_TIMEOUT);
                sta->plink_state = NL80211_PLINK_HOLDING;
                mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata));
                spin_unlock_bh(&sta->lock);
-               mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid,
-                                   reason);
+               mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
+                                   sta->sta.addr, llid, plid, reason);
                break;
        case NL80211_PLINK_HOLDING:
                /* holding timer */
@@ -401,7 +384,7 @@ int mesh_plink_open(struct sta_info *sta)
        mpl_dbg("Mesh plink: starting establishment with %pM\n",
                sta->sta.addr);
 
-       return mesh_plink_frame_tx(sdata, PLINK_OPEN,
+       return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
                                   sta->sta.addr, llid, 0, 0);
 }
 
@@ -427,7 +410,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
        struct ieee802_11_elems elems;
        struct sta_info *sta;
        enum plink_event event;
-       enum plink_frame_type ftype;
+       enum ieee80211_self_protected_actioncode ftype;
        size_t baselen;
        bool deactivated, matches_local = true;
        u8 ie_len;
@@ -456,7 +439,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
        baseaddr = mgmt->u.action.u.plink_action.variable;
        baselen = (u8 *) mgmt->u.action.u.plink_action.variable - (u8 *) mgmt;
-       if (mgmt->u.action.u.plink_action.action_code == PLINK_CONFIRM) {
+       if (mgmt->u.action.u.plink_action.action_code ==
+                                               WLAN_SP_MESH_PEERING_CONFIRM) {
                baseaddr += 4;
                baselen += 4;
        }
@@ -473,15 +457,17 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
        ftype = mgmt->u.action.u.plink_action.action_code;
        ie_len = elems.peer_link_len;
-       if ((ftype == PLINK_OPEN && ie_len != 6) ||
-           (ftype == PLINK_CONFIRM && ie_len != 8) ||
-           (ftype == PLINK_CLOSE && ie_len != 8 && ie_len != 10)) {
+       if ((ftype == WLAN_SP_MESH_PEERING_OPEN && ie_len != 6) ||
+           (ftype == WLAN_SP_MESH_PEERING_CONFIRM && ie_len != 8) ||
+           (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len != 8
+                                                       && ie_len != 10)) {
                mpl_dbg("Mesh plink: incorrect plink ie length %d %d\n",
                    ftype, ie_len);
                return;
        }
 
-       if (ftype != PLINK_CLOSE && (!elems.mesh_id || !elems.mesh_config)) {
+       if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
+                               (!elems.mesh_id || !elems.mesh_config)) {
                mpl_dbg("Mesh plink: missing necessary ie\n");
                return;
        }
@@ -489,13 +475,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
         * from the point of view of this host.
         */
        memcpy(&plid, PLINK_GET_LLID(elems.peer_link), 2);
-       if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 10))
+       if (ftype == WLAN_SP_MESH_PEERING_CONFIRM ||
+           (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len == 10))
                memcpy(&llid, PLINK_GET_PLID(elems.peer_link), 2);
 
        rcu_read_lock();
 
        sta = sta_info_get(sdata, mgmt->sa);
-       if (!sta && ftype != PLINK_OPEN) {
+       if (!sta && ftype != WLAN_SP_MESH_PEERING_OPEN) {
                mpl_dbg("Mesh plink: cls or cnf from unknown peer\n");
                rcu_read_unlock();
                return;
@@ -514,30 +501,30 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
        /* Now we will figure out the appropriate event... */
        event = PLINK_UNDEFINED;
-       if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, sdata))) {
+       if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
+           (!mesh_matches_local(&elems, sdata))) {
                matches_local = false;
                switch (ftype) {
-               case PLINK_OPEN:
+               case WLAN_SP_MESH_PEERING_OPEN:
                        event = OPN_RJCT;
                        break;
-               case PLINK_CONFIRM:
+               case WLAN_SP_MESH_PEERING_CONFIRM:
                        event = CNF_RJCT;
                        break;
-               case PLINK_CLOSE:
-                       /* avoid warning */
+               default:
                        break;
                }
        }
 
        if (!sta && !matches_local) {
                rcu_read_unlock();
-               reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
+               reason = cpu_to_le16(WLAN_REASON_MESH_CONFIG);
                llid = 0;
-               mesh_plink_frame_tx(sdata, PLINK_CLOSE, mgmt->sa, llid,
-                                   plid, reason);
+               mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
+                                   mgmt->sa, llid, plid, reason);
                return;
        } else if (!sta) {
-               /* ftype == PLINK_OPEN */
+               /* ftype == WLAN_SP_MESH_PEERING_OPEN */
                u32 rates;
 
                rcu_read_unlock();
@@ -562,21 +549,21 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
        } else if (matches_local) {
                spin_lock_bh(&sta->lock);
                switch (ftype) {
-               case PLINK_OPEN:
+               case WLAN_SP_MESH_PEERING_OPEN:
                        if (!mesh_plink_free_count(sdata) ||
                            (sta->plid && sta->plid != plid))
                                event = OPN_IGNR;
                        else
                                event = OPN_ACPT;
                        break;
-               case PLINK_CONFIRM:
+               case WLAN_SP_MESH_PEERING_CONFIRM:
                        if (!mesh_plink_free_count(sdata) ||
                            (sta->llid != llid || sta->plid != plid))
                                event = CNF_IGNR;
                        else
                                event = CNF_ACPT;
                        break;
-               case PLINK_CLOSE:
+               case WLAN_SP_MESH_PEERING_CLOSE:
                        if (sta->plink_state == NL80211_PLINK_ESTAB)
                                /* Do not check for llid or plid. This does not
                                 * follow the standard but since multiple plinks
@@ -625,10 +612,12 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
                        sta->llid = llid;
                        mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_OPEN, sta->sta.addr, llid,
-                                           0, 0);
-                       mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr,
-                                           llid, plid, 0);
+                       mesh_plink_frame_tx(sdata,
+                                           WLAN_SP_MESH_PEERING_OPEN,
+                                           sta->sta.addr, llid, 0, 0);
+                       mesh_plink_frame_tx(sdata,
+                                           WLAN_SP_MESH_PEERING_CONFIRM,
+                                           sta->sta.addr, llid, plid, 0);
                        break;
                default:
                        spin_unlock_bh(&sta->lock);
@@ -640,10 +629,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
                switch (event) {
                case OPN_RJCT:
                case CNF_RJCT:
-                       reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
+                       reason = cpu_to_le16(WLAN_REASON_MESH_CONFIG);
                case CLS_ACPT:
                        if (!reason)
-                               reason = cpu_to_le16(MESH_CLOSE_RCVD);
+                               reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
                        sta->reason = reason;
                        sta->plink_state = NL80211_PLINK_HOLDING;
                        if (!mod_plink_timer(sta,
@@ -652,8 +641,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
                        llid = sta->llid;
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
-                                           plid, reason);
+                       mesh_plink_frame_tx(sdata,
+                                           WLAN_SP_MESH_PEERING_CLOSE,
+                                           sta->sta.addr, llid, plid, reason);
                        break;
                case OPN_ACPT:
                        /* retry timer is left untouched */
@@ -661,8 +651,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
                        sta->plid = plid;
                        llid = sta->llid;
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
-                                           plid, 0);
+                       mesh_plink_frame_tx(sdata,
+                                           WLAN_SP_MESH_PEERING_CONFIRM,
+                                           sta->sta.addr, llid, plid, 0);
                        break;
                case CNF_ACPT:
                        sta->plink_state = NL80211_PLINK_CNF_RCVD;
@@ -682,10 +673,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
                switch (event) {
                case OPN_RJCT:
                case CNF_RJCT:
-                       reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
+                       reason = cpu_to_le16(WLAN_REASON_MESH_CONFIG);
                case CLS_ACPT:
                        if (!reason)
-                               reason = cpu_to_le16(MESH_CLOSE_RCVD);
+                               reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
                        sta->reason = reason;
                        sta->plink_state = NL80211_PLINK_HOLDING;
                        if (!mod_plink_timer(sta,
@@ -694,14 +685,15 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
                        llid = sta->llid;
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
-                                           plid, reason);
+                       mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
+                                           sta->sta.addr, llid, plid, reason);
                        break;
                case OPN_ACPT:
                        llid = sta->llid;
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
-                                           plid, 0);
+                       mesh_plink_frame_tx(sdata,
+                                           WLAN_SP_MESH_PEERING_CONFIRM,
+                                           sta->sta.addr, llid, plid, 0);
                        break;
                case CNF_ACPT:
                        del_timer(&sta->plink_timer);
@@ -722,10 +714,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
                switch (event) {
                case OPN_RJCT:
                case CNF_RJCT:
-                       reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION);
+                       reason = cpu_to_le16(WLAN_REASON_MESH_CONFIG);
                case CLS_ACPT:
                        if (!reason)
-                               reason = cpu_to_le16(MESH_CLOSE_RCVD);
+                               reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
                        sta->reason = reason;
                        sta->plink_state = NL80211_PLINK_HOLDING;
                        if (!mod_plink_timer(sta,
@@ -734,8 +726,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
                        llid = sta->llid;
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
-                                           plid, reason);
+                       mesh_plink_frame_tx(sdata,
+                                           WLAN_SP_MESH_PEERING_CLOSE,
+                                           sta->sta.addr, llid, plid, reason);
                        break;
                case OPN_ACPT:
                        del_timer(&sta->plink_timer);
@@ -745,8 +738,9 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
                        ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
                        mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
                                sta->sta.addr);
-                       mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
-                                           plid, 0);
+                       mesh_plink_frame_tx(sdata,
+                                           WLAN_SP_MESH_PEERING_CONFIRM,
+                                           sta->sta.addr, llid, plid, 0);
                        break;
                default:
                        spin_unlock_bh(&sta->lock);
@@ -757,7 +751,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
        case NL80211_PLINK_ESTAB:
                switch (event) {
                case CLS_ACPT:
-                       reason = cpu_to_le16(MESH_CLOSE_RCVD);
+                       reason = cpu_to_le16(WLAN_REASON_MESH_CLOSE);
                        sta->reason = reason;
                        deactivated = __mesh_plink_deactivate(sta);
                        sta->plink_state = NL80211_PLINK_HOLDING;
@@ -766,14 +760,15 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
                        spin_unlock_bh(&sta->lock);
                        if (deactivated)
                                ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
-                       mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid,
-                                           plid, reason);
+                       mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
+                                           sta->sta.addr, llid, plid, reason);
                        break;
                case OPN_ACPT:
                        llid = sta->llid;
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_CONFIRM, sta->sta.addr, llid,
-                                           plid, 0);
+                       mesh_plink_frame_tx(sdata,
+                                           WLAN_SP_MESH_PEERING_CONFIRM,
+                                           sta->sta.addr, llid, plid, 0);
                        break;
                default:
                        spin_unlock_bh(&sta->lock);
@@ -795,8 +790,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
                        llid = sta->llid;
                        reason = sta->reason;
                        spin_unlock_bh(&sta->lock);
-                       mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr,
-                                           llid, plid, reason);
+                       mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
+                                           sta->sta.addr, llid, plid, reason);
                        break;
                default:
                        spin_unlock_bh(&sta->lock);