* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Board ID (bit 0) */
- { 1, MPP_GPIO }, /* Board ID (bit 1) */
- { 2, MPP_GPIO }, /* Board ID (bit 2) */
- { 3, MPP_GPIO }, /* SATA 0 power */
- { 4, MPP_UNUSED },
- { 5, MPP_GPIO }, /* Fan fail detection */
- { 6, MPP_GPIO }, /* Red front LED */
- { 7, MPP_UNUSED },
- { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
- { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED },
- { 12, MPP_GPIO }, /* SATA 1 power */
- { 13, MPP_UNUSED },
- { 14, MPP_SATA_LED }, /* SATA 0 active */
- { 15, MPP_SATA_LED }, /* SATA 1 active */
- { 16, MPP_GPIO }, /* Blue front LED blink control */
- { 17, MPP_UNUSED },
- { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
- { 19, MPP_UNUSED },
- { -1 }
+static unsigned int d2net_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Board ID (bit 0) */
+ MPP1_GPIO, /* Board ID (bit 1) */
+ MPP2_GPIO, /* Board ID (bit 2) */
+ MPP3_GPIO, /* SATA 0 power */
+ MPP4_UNUSED,
+ MPP5_GPIO, /* Fan fail detection */
+ MPP6_GPIO, /* Red front LED */
+ MPP7_UNUSED,
+ MPP8_GPIO, /* Rear power switch (on|auto) */
+ MPP9_GPIO, /* Rear power switch (auto|off) */
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_GPIO, /* SATA 1 power */
+ MPP13_UNUSED,
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_GPIO, /* Blue front LED blink control */
+ MPP17_UNUSED,
+ MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */
+ MPP19_UNUSED,
+ 0,
/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
/* 23: Blue front LED off */
/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* USB Over Current */
- { 1, MPP_GPIO }, /* USB Vbat input */
- { 2, MPP_PCI_ARB }, /* PCI_REQn[2] */
- { 3, MPP_PCI_ARB }, /* PCI_GNTn[2] */
- { 4, MPP_PCI_ARB }, /* PCI_REQn[3] */
- { 5, MPP_PCI_ARB }, /* PCI_GNTn[3] */
- { 6, MPP_GPIO }, /* JP0, CON17.2 */
- { 7, MPP_GPIO }, /* JP1, CON17.1 */
- { 8, MPP_GPIO }, /* JP2, CON11.2 */
- { 9, MPP_GPIO }, /* JP3, CON11.3 */
- { 10, MPP_GPIO }, /* RTC int */
- { 11, MPP_GPIO }, /* Baud Rate Generator */
- { 12, MPP_GPIO }, /* PCI int 1 */
- { 13, MPP_GPIO }, /* PCI int 2 */
- { 14, MPP_NAND }, /* NAND_REn[2] */
- { 15, MPP_NAND }, /* NAND_WEn[2] */
- { 16, MPP_UART }, /* UART1_RX */
- { 17, MPP_UART }, /* UART1_TX */
- { 18, MPP_UART }, /* UART1_CTSn */
- { 19, MPP_UART }, /* UART1_RTSn */
- { -1 },
+static unsigned int db88f5281_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* USB Over Current */
+ MPP1_GPIO, /* USB Vbat input */
+ MPP2_PCI_ARB, /* PCI_REQn[2] */
+ MPP3_PCI_ARB, /* PCI_GNTn[2] */
+ MPP4_PCI_ARB, /* PCI_REQn[3] */
+ MPP5_PCI_ARB, /* PCI_GNTn[3] */
+ MPP6_GPIO, /* JP0, CON17.2 */
+ MPP7_GPIO, /* JP1, CON17.1 */
+ MPP8_GPIO, /* JP2, CON11.2 */
+ MPP9_GPIO, /* JP3, CON11.3 */
+ MPP10_GPIO, /* RTC int */
+ MPP11_GPIO, /* Baud Rate Generator */
+ MPP12_GPIO, /* PCI int 1 */
+ MPP13_GPIO, /* PCI int 2 */
+ MPP14_NAND, /* NAND_REn[2] */
+ MPP15_NAND, /* NAND_WEn[2] */
+ MPP16_UART, /* UART1_RX */
+ MPP17_UART, /* UART1_TX */
+ MPP18_UART, /* UART1_CTSn */
+ MPP19_UART, /* UART1_RTSn */
+ 0,
};
static void __init db88f5281_init(void)
/****************************************************************************
* General Setup
*/
-static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = {
- { 0, MPP_PCIE_RST_OUTn },
- { 1, MPP_GPIO }, /* right amber LED (sata ch0) */
- { 2, MPP_GPIO }, /* left amber LED (sata ch1) */
- { 3, MPP_UNUSED },
- { 4, MPP_GPIO }, /* power button LED */
- { 5, MPP_GPIO }, /* power button LED */
- { 6, MPP_GPIO }, /* GMT G751-2f overtemp */
- { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */
- { 8, MPP_GPIO }, /* triggers power off */
- { 9, MPP_GPIO }, /* power button switch */
- { 10, MPP_GPIO }, /* reset button switch */
- { 11, MPP_UNUSED },
- { 12, MPP_UNUSED },
- { 13, MPP_UNUSED },
- { 14, MPP_UNUSED },
- { 15, MPP_UNUSED },
- { 16, MPP_UNUSED },
- { 17, MPP_UNUSED },
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int dns323a_mpp_modes[] __initdata = {
+ MPP0_PCIE_RST_OUTn,
+ MPP1_GPIO, /* right amber LED (sata ch0) */
+ MPP2_GPIO, /* left amber LED (sata ch1) */
+ MPP3_UNUSED,
+ MPP4_GPIO, /* power button LED */
+ MPP5_GPIO, /* power button LED */
+ MPP6_GPIO, /* GMT G751-2f overtemp */
+ MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */
+ MPP8_GPIO, /* triggers power off */
+ MPP9_GPIO, /* power button switch */
+ MPP10_GPIO, /* reset button switch */
+ MPP11_UNUSED,
+ MPP12_UNUSED,
+ MPP13_UNUSED,
+ MPP14_UNUSED,
+ MPP15_UNUSED,
+ MPP16_UNUSED,
+ MPP17_UNUSED,
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
-static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = {
- { 0, MPP_UNUSED },
- { 1, MPP_GPIO }, /* right amber LED (sata ch0) */
- { 2, MPP_GPIO }, /* left amber LED (sata ch1) */
- { 3, MPP_GPIO }, /* system up flag */
- { 4, MPP_GPIO }, /* power button LED */
- { 5, MPP_GPIO }, /* power button LED */
- { 6, MPP_GPIO }, /* GMT G751-2f overtemp */
- { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */
- { 8, MPP_GPIO }, /* triggers power off */
- { 9, MPP_GPIO }, /* power button switch */
- { 10, MPP_GPIO }, /* reset button switch */
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED },
- { 13, MPP_SATA_LED },
- { 14, MPP_SATA_LED },
- { 15, MPP_SATA_LED },
- { 16, MPP_UNUSED },
- { 17, MPP_UNUSED },
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int dns323b_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_GPIO, /* right amber LED (sata ch0) */
+ MPP2_GPIO, /* left amber LED (sata ch1) */
+ MPP3_GPIO, /* system up flag */
+ MPP4_GPIO, /* power button LED */
+ MPP5_GPIO, /* power button LED */
+ MPP6_GPIO, /* GMT G751-2f overtemp */
+ MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */
+ MPP8_GPIO, /* triggers power off */
+ MPP9_GPIO, /* power button switch */
+ MPP10_GPIO, /* reset button switch */
+ MPP11_UNUSED,
+ MPP12_SATA_LED,
+ MPP13_SATA_LED,
+ MPP14_SATA_LED,
+ MPP15_SATA_LED,
+ MPP16_UNUSED,
+ MPP17_UNUSED,
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
-static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* ? input */
- { 1, MPP_GPIO }, /* input power switch (0 = pressed) */
- { 2, MPP_GPIO }, /* output power off */
- { 3, MPP_UNUSED }, /* ? output */
- { 4, MPP_UNUSED }, /* ? output */
- { 5, MPP_UNUSED }, /* ? output */
- { 6, MPP_UNUSED }, /* ? output */
- { 7, MPP_UNUSED }, /* ? output */
- { 8, MPP_GPIO }, /* i/o right amber LED */
- { 9, MPP_GPIO }, /* i/o left amber LED */
- { 10, MPP_GPIO }, /* input */
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED },
- { 13, MPP_SATA_LED },
- { 14, MPP_SATA_LED },
- { 15, MPP_SATA_LED },
- { 16, MPP_UNUSED },
- { 17, MPP_GPIO }, /* power button LED */
- { 18, MPP_GPIO }, /* fan speed bit 0 */
- { 19, MPP_GPIO }, /* fan speed bit 1 */
- { -1 },
+static unsigned int dns323c_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* ? input */
+ MPP1_GPIO, /* input power switch (0 = pressed) */
+ MPP2_GPIO, /* output power off */
+ MPP3_UNUSED, /* ? output */
+ MPP4_UNUSED, /* ? output */
+ MPP5_UNUSED, /* ? output */
+ MPP6_UNUSED, /* ? output */
+ MPP7_UNUSED, /* ? output */
+ MPP8_GPIO, /* i/o right amber LED */
+ MPP9_GPIO, /* i/o left amber LED */
+ MPP10_GPIO, /* input */
+ MPP11_UNUSED,
+ MPP12_SATA_LED,
+ MPP13_SATA_LED,
+ MPP14_SATA_LED,
+ MPP15_SATA_LED,
+ MPP16_UNUSED,
+ MPP17_GPIO, /* power button LED */
+ MPP18_GPIO, /* fan speed bit 0 */
+ MPP19_GPIO, /* fan speed bit 1 */
+ 0,
};
/* Rev C1 Fan speed notes:
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode edminiv2_mpp_modes[] __initdata = {
- { 0, MPP_UNUSED },
- { 1, MPP_UNUSED },
- { 2, MPP_UNUSED },
- { 3, MPP_GPIO }, /* RTC interrupt */
- { 4, MPP_UNUSED },
- { 5, MPP_UNUSED },
- { 6, MPP_UNUSED },
- { 7, MPP_UNUSED },
- { 8, MPP_UNUSED },
- { 9, MPP_UNUSED },
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED }, /* SATA 0 presence */
- { 13, MPP_SATA_LED }, /* SATA 1 presence */
- { 14, MPP_SATA_LED }, /* SATA 0 active */
- { 15, MPP_SATA_LED }, /* SATA 1 active */
+static unsigned int edminiv2_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_UNUSED,
+ MPP2_UNUSED,
+ MPP3_GPIO, /* RTC interrupt */
+ MPP4_UNUSED,
+ MPP5_UNUSED,
+ MPP6_UNUSED,
+ MPP7_UNUSED,
+ MPP8_UNUSED,
+ MPP9_UNUSED,
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_SATA_LED, /* SATA 0 presence */
+ MPP13_SATA_LED, /* SATA 1 presence */
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
/* 16: Power LED control (0 = On, 1 = Off) */
- { 16, MPP_GPIO },
+ MPP16_GPIO,
/* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */
- { 17, MPP_GPIO },
+ MPP17_GPIO,
/* 18: Power button status (0 = Released, 1 = Pressed) */
- { 18, MPP_GPIO },
- { 19, MPP_UNUSED },
- { -1 }
+ MPP18_GPIO,
+ MPP19_UNUSED,
+ 0,
};
static void __init edmini_v2_init(void)
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = {
- { 0, MPP_UNUSED },
- { 1, MPP_UNUSED },
- { 2, MPP_GPIO }, /* GPIO Micon */
- { 3, MPP_GPIO }, /* GPIO Rtc */
- { 4, MPP_UNUSED },
- { 5, MPP_UNUSED },
- { 6, MPP_NAND }, /* NAND Flash REn */
- { 7, MPP_NAND }, /* NAND Flash WEn */
- { 8, MPP_UNUSED },
- { 9, MPP_UNUSED },
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED }, /* SATA 0 presence */
- { 13, MPP_SATA_LED }, /* SATA 1 presence */
- { 14, MPP_SATA_LED }, /* SATA 0 active */
- { 15, MPP_SATA_LED }, /* SATA 1 active */
- { 16, MPP_UART }, /* UART1 RXD */
- { 17, MPP_UART }, /* UART1 TXD */
- { 18, MPP_UART }, /* UART1 CTSn */
- { 19, MPP_UART }, /* UART1 RTSn */
- { -1 },
+static unsigned int kurobox_pro_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_UNUSED,
+ MPP2_GPIO, /* GPIO Micon */
+ MPP3_GPIO, /* GPIO Rtc */
+ MPP4_UNUSED,
+ MPP5_UNUSED,
+ MPP6_NAND, /* NAND Flash REn */
+ MPP7_NAND, /* NAND Flash WEn */
+ MPP8_UNUSED,
+ MPP9_UNUSED,
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_SATA_LED, /* SATA 0 presence */
+ MPP13_SATA_LED, /* SATA 1 presence */
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_UART, /* UART1 RXD */
+ MPP17_UART, /* UART1 TXD */
+ MPP18_UART, /* UART1 CTSn */
+ MPP19_UART, /* UART1 RTSn */
+ 0,
};
static void __init kurobox_pro_init(void)
* GPIO Data
****************************************************************************/
-static struct orion5x_mpp_mode lschl_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* LED POWER */
- { 1, MPP_GPIO }, /* HDD POWER */
- { 2, MPP_GPIO }, /* LED ALARM */
- { 3, MPP_GPIO }, /* LED INFO */
- { 4, MPP_UNUSED },
- { 5, MPP_UNUSED },
- { 6, MPP_GPIO }, /* FAN LOCK */
- { 7, MPP_GPIO }, /* SW INIT */
- { 8, MPP_GPIO }, /* SW POWER */
- { 9, MPP_GPIO }, /* USB POWER */
- { 10, MPP_GPIO }, /* SW AUTO POWER */
- { 11, MPP_UNUSED },
- { 12, MPP_UNUSED },
- { 13, MPP_UNUSED },
- { 14, MPP_GPIO }, /* FAN HIGH */
- { 15, MPP_GPIO }, /* SW FUNC */
- { 16, MPP_GPIO }, /* FAN LOW */
- { 17, MPP_GPIO }, /* LED FUNC */
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int lschl_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* LED POWER */
+ MPP1_GPIO, /* HDD POWER */
+ MPP2_GPIO, /* LED ALARM */
+ MPP3_GPIO, /* LED INFO */
+ MPP4_UNUSED,
+ MPP5_UNUSED,
+ MPP6_GPIO, /* FAN LOCK */
+ MPP7_GPIO, /* SW INIT */
+ MPP8_GPIO, /* SW POWER */
+ MPP9_GPIO, /* USB POWER */
+ MPP10_GPIO, /* SW AUTO POWER */
+ MPP11_UNUSED,
+ MPP12_UNUSED,
+ MPP13_UNUSED,
+ MPP14_GPIO, /* FAN HIGH */
+ MPP15_GPIO, /* SW FUNC */
+ MPP16_GPIO, /* FAN LOW */
+ MPP17_GPIO, /* LED FUNC */
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
static void __init lschl_init(void)
#define LS_HGL_GPIO_HDD_POWER 1
-static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* LED_PWR */
- { 1, MPP_GPIO }, /* HDD_PWR */
- { 2, MPP_GPIO }, /* LED_ALARM */
- { 3, MPP_GPIO }, /* LED_INFO */
- { 4, MPP_UNUSED },
- { 5, MPP_UNUSED },
- { 6, MPP_GPIO }, /* FAN_LCK */
- { 7, MPP_GPIO }, /* INIT */
- { 8, MPP_GPIO }, /* POWER */
- { 9, MPP_GPIO }, /* USB_PWR */
- { 10, MPP_GPIO }, /* AUTO_POWER */
- { 11, MPP_UNUSED }, /* LED_ETH (dummy) */
- { 12, MPP_UNUSED },
- { 13, MPP_UNUSED },
- { 14, MPP_UNUSED },
- { 15, MPP_GPIO }, /* FUNC */
- { 16, MPP_UNUSED },
- { 17, MPP_GPIO }, /* LED_FUNC */
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int ls_hgl_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* LED_PWR */
+ MPP1_GPIO, /* HDD_PWR */
+ MPP2_GPIO, /* LED_ALARM */
+ MPP3_GPIO, /* LED_INFO */
+ MPP4_UNUSED,
+ MPP5_UNUSED,
+ MPP6_GPIO, /* FAN_LCK */
+ MPP7_GPIO, /* INIT */
+ MPP8_GPIO, /* POWER */
+ MPP9_GPIO, /* USB_PWR */
+ MPP10_GPIO, /* AUTO_POWER */
+ MPP11_UNUSED, /* LED_ETH (dummy) */
+ MPP12_UNUSED,
+ MPP13_UNUSED,
+ MPP14_UNUSED,
+ MPP15_GPIO, /* FUNC */
+ MPP16_UNUSED,
+ MPP17_GPIO, /* LED_FUNC */
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
static void __init ls_hgl_init(void)
#define LSMINI_GPIO_HDD_POWER0 1
#define LSMINI_GPIO_HDD_POWER1 19
-static struct orion5x_mpp_mode lsmini_mpp_modes[] __initdata = {
- { 0, MPP_UNUSED }, /* LED_RESERVE1 (unused) */
- { 1, MPP_GPIO }, /* HDD_PWR */
- { 2, MPP_GPIO }, /* LED_ALARM */
- { 3, MPP_GPIO }, /* LED_INFO */
- { 4, MPP_UNUSED },
- { 5, MPP_UNUSED },
- { 6, MPP_UNUSED },
- { 7, MPP_UNUSED },
- { 8, MPP_UNUSED },
- { 9, MPP_GPIO }, /* LED_FUNC */
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED }, /* LED_ETH (dummy) */
- { 12, MPP_UNUSED },
- { 13, MPP_UNUSED },
- { 14, MPP_GPIO }, /* LED_PWR */
- { 15, MPP_GPIO }, /* FUNC */
- { 16, MPP_GPIO }, /* USB_PWR */
- { 17, MPP_GPIO }, /* AUTO_POWER */
- { 18, MPP_GPIO }, /* POWER */
- { 19, MPP_GPIO }, /* HDD_PWR1 */
- { -1 },
+static unsigned int lsmini_mpp_modes[] __initdata = {
+ MPP0_UNUSED, /* LED_RESERVE1 (unused) */
+ MPP1_GPIO, /* HDD_PWR */
+ MPP2_GPIO, /* LED_ALARM */
+ MPP3_GPIO, /* LED_INFO */
+ MPP4_UNUSED,
+ MPP5_UNUSED,
+ MPP6_UNUSED,
+ MPP7_UNUSED,
+ MPP8_UNUSED,
+ MPP9_GPIO, /* LED_FUNC */
+ MPP10_UNUSED,
+ MPP11_UNUSED, /* LED_ETH (dummy) */
+ MPP12_UNUSED,
+ MPP13_UNUSED,
+ MPP14_GPIO, /* LED_PWR */
+ MPP15_GPIO, /* FUNC */
+ MPP16_GPIO, /* USB_PWR */
+ MPP17_GPIO, /* AUTO_POWER */
+ MPP18_GPIO, /* POWER */
+ MPP19_GPIO, /* HDD_PWR1 */
+ 0,
};
static void __init lsmini_init(void)
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
-#include <asm/gpio.h>
#include <mach/hardware.h>
-#include "common.h"
+#include <plat/mpp.h>
#include "mpp.h"
+#include "common.h"
-static int is_5181l(void)
-{
- u32 dev;
- u32 rev;
-
- orion5x_pcie_id(&dev, &rev);
-
- return !!(dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0);
-}
-
-static int is_5182(void)
+static unsigned int __init orion5x_variant(void)
{
u32 dev;
u32 rev;
orion5x_pcie_id(&dev, &rev);
- return !!(dev == MV88F5182_DEV_ID);
-}
+ if (dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0)
+ return MPP_F5181_MASK;
-static int is_5281(void)
-{
- u32 dev;
- u32 rev;
+ if (dev == MV88F5182_DEV_ID)
+ return MPP_F5182_MASK;
- orion5x_pcie_id(&dev, &rev);
+ if (dev == MV88F5281_DEV_ID)
+ return MPP_F5281_MASK;
- return !!(dev == MV88F5281_DEV_ID);
+ printk(KERN_ERR "MPP setup: unknown orion5x variant "
+ "(dev %#x rev %#x)\n", dev, rev);
+ return 0;
}
-static int __init determine_type_encoding(int mpp, enum orion5x_mpp_type type)
+void __init orion5x_mpp_conf(unsigned int *mpp_list)
{
- switch (type) {
- case MPP_UNUSED:
- case MPP_GPIO:
- if (mpp == 0)
- return 3;
- if (mpp >= 1 && mpp <= 15)
- return 0;
- if (mpp >= 16 && mpp <= 19) {
- if (is_5182())
- return 5;
- if (type == MPP_UNUSED)
- return 0;
- }
- return -1;
-
- case MPP_PCIE_RST_OUTn:
- if (mpp == 0)
- return 0;
- return -1;
-
- case MPP_PCI_ARB:
- if (mpp >= 0 && mpp <= 7)
- return 2;
- return -1;
-
- case MPP_PCI_PMEn:
- if (mpp == 2)
- return 3;
- return -1;
-
- case MPP_GIGE:
- if (mpp >= 8 && mpp <= 19)
- return 1;
- return -1;
-
- case MPP_NAND:
- if (is_5182() || is_5281()) {
- if (mpp >= 4 && mpp <= 7)
- return 4;
- if (mpp >= 12 && mpp <= 17)
- return 4;
- }
- return -1;
-
- case MPP_PCI_CLK:
- if (is_5181l() && mpp >= 6 && mpp <= 7)
- return 5;
- return -1;
-
- case MPP_SATA_LED:
- if (is_5182()) {
- if (mpp >= 4 && mpp <= 7)
- return 5;
- if (mpp >= 12 && mpp <= 15)
- return 5;
- }
- return -1;
-
- case MPP_UART:
- if (mpp >= 16 && mpp <= 19)
- return 0;
- return -1;
- }
-
- printk(KERN_INFO "unknown MPP type %d\n", type);
-
- return -1;
-}
-
-void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
-{
- u32 mpp_0_7_ctrl = readl(MPP_0_7_CTRL);
- u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
- u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
-
- for ( ; mode->mpp >= 0; mode++) {
- u32 *reg;
- int num_type;
- int shift;
-
- if (mode->mpp >= 0 && mode->mpp <= 7)
- reg = &mpp_0_7_ctrl;
- else if (mode->mpp >= 8 && mode->mpp <= 15)
- reg = &mpp_8_15_ctrl;
- else if (mode->mpp >= 16 && mode->mpp <= 19)
- reg = &mpp_16_19_ctrl;
- else {
- printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
- "(%d)\n", mode->mpp);
- continue;
- }
-
- num_type = determine_type_encoding(mode->mpp, mode->type);
- if (num_type < 0) {
- printk(KERN_ERR "orion5x_mpp_conf: invalid MPP "
- "combination (%d, %d)\n", mode->mpp,
- mode->type);
- continue;
- }
-
- shift = (mode->mpp & 7) << 2;
- *reg &= ~(0xf << shift);
- *reg |= (num_type & 0xf) << shift;
-
- if (mode->type == MPP_UNUSED && (mode->mpp < 16 || is_5182()))
- orion_gpio_set_unused(mode->mpp);
-
- orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
- }
-
- writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
- writel(mpp_8_15_ctrl, MPP_8_15_CTRL);
- writel(mpp_16_19_ctrl, MPP_16_19_CTRL);
+ orion_mpp_conf(mpp_list, orion5x_variant(),
+ MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE);
}
#ifndef __ARCH_ORION5X_MPP_H
#define __ARCH_ORION5X_MPP_H
-enum orion5x_mpp_type {
- /*
- * This MPP is unused.
- */
- MPP_UNUSED,
-
- /*
- * This MPP pin is used as a generic GPIO pin. Valid for
- * MPPs 0-15 and device bus data pins 16-31. On 5182, also
- * valid for MPPs 16-19.
- */
- MPP_GPIO,
-
- /*
- * This MPP is used as PCIe_RST_OUTn pin. Valid for
- * MPP 0 only.
- */
- MPP_PCIE_RST_OUTn,
-
- /*
- * This MPP is used as PCI arbiter pin (REQn/GNTn).
- * Valid for MPPs 0-7 only.
- */
- MPP_PCI_ARB,
-
- /*
- * This MPP is used as PCI_PMEn pin. Valid for MPP 2 only.
- */
- MPP_PCI_PMEn,
-
- /*
- * This MPP is used as GigE half-duplex (COL, CRS) or GMII
- * (RXERR, CRS, TXERR, TXD[7:4], RXD[7:4]) pin. Valid for
- * MPPs 8-19 only.
- */
- MPP_GIGE,
-
- /*
- * This MPP is used as NAND REn/WEn pin. Valid for MPPs
- * 4-7 and 12-17 only, and only on the 5181l/5182/5281.
- */
- MPP_NAND,
-
- /*
- * This MPP is used as a PCI clock output pin. Valid for
- * MPPs 6-7 only, and only on the 5181l.
- */
- MPP_PCI_CLK,
-
- /*
- * This MPP is used as a SATA presence/activity LED.
- * Valid for MPPs 4-7 and 12-15 only, and only on the 5182.
- */
- MPP_SATA_LED,
-
- /*
- * This MPP is used as UART1 RXD/TXD/CTSn/RTSn pin.
- * Valid for MPPs 16-19 only.
- */
- MPP_UART,
-};
-
-struct orion5x_mpp_mode {
- int mpp;
- enum orion5x_mpp_type type;
-};
-
-void orion5x_mpp_conf(struct orion5x_mpp_mode *mode);
+#define MPP(_num, _sel, _in, _out, _F5181l, _F5182, _F5281) ( \
+ /* MPP number */ ((_num) & 0xff) | \
+ /* MPP select value */ (((_sel) & 0xf) << 8) | \
+ /* may be input signal */ ((!!(_in)) << 12) | \
+ /* may be output signal */ ((!!(_out)) << 13) | \
+ /* available on F5181l */ ((!!(_F5181l)) << 14) | \
+ /* available on F5182 */ ((!!(_F5182)) << 15) | \
+ /* available on F5281 */ ((!!(_F5281)) << 16))
+ /* num sel i o 5181 5182 5281 */
+
+#define MPP_F5181_MASK MPP(0, 0x0, 0, 0, 1, 0, 0)
+#define MPP_F5182_MASK MPP(0, 0x0, 0, 0, 0, 1, 0)
+#define MPP_F5281_MASK MPP(0, 0x0, 0, 0, 0, 0, 1)
+
+#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1, 1, 1)
+#define MPP0_GPIO MPP(0, 0x3, 1, 1, 1, 1, 1)
+#define MPP0_PCIE_RST_OUTn MPP(0, 0x0, 0, 0, 1, 1, 1)
+#define MPP0_PCI_ARB MPP(0, 0x2, 0, 0, 1, 1, 1)
+
+#define MPP1_UNUSED MPP(1, 0x0, 0, 0, 1, 1, 1)
+#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1, 1, 1)
+#define MPP1_PCI_ARB MPP(1, 0x2, 0, 0, 1, 1, 1)
+
+#define MPP2_UNUSED MPP(2, 0x0, 0, 0, 1, 1, 1)
+#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1, 1, 1)
+#define MPP2_PCI_ARB MPP(2, 0x2, 0, 0, 1, 1, 1)
+#define MPP2_PCI_PMEn MPP(2, 0x3, 0, 0, 1, 1, 1)
+
+#define MPP3_UNUSED MPP(3, 0x0, 0, 0, 1, 1, 1)
+#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1, 1, 1)
+#define MPP3_PCI_ARB MPP(3, 0x2, 0, 0, 1, 1, 1)
+
+#define MPP4_UNUSED MPP(4, 0x0, 0, 0, 1, 1, 1)
+#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1, 1, 1)
+#define MPP4_PCI_ARB MPP(4, 0x2, 0, 0, 1, 1, 1)
+#define MPP4_NAND MPP(4, 0x4, 0, 0, 0, 1, 1)
+#define MPP4_SATA_LED MPP(4, 0x5, 0, 0, 0, 1, 0)
+
+#define MPP5_UNUSED MPP(5, 0x0, 0, 0, 1, 1, 1)
+#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1, 1, 1)
+#define MPP5_PCI_ARB MPP(5, 0x2, 0, 0, 1, 1, 1)
+#define MPP5_NAND MPP(5, 0x4, 0, 0, 0, 1, 1)
+#define MPP5_SATA_LED MPP(5, 0x5, 0, 0, 0, 1, 0)
+
+#define MPP6_UNUSED MPP(6, 0x0, 0, 0, 1, 1, 1)
+#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1, 1, 1)
+#define MPP6_PCI_ARB MPP(6, 0x2, 0, 0, 1, 1, 1)
+#define MPP6_NAND MPP(6, 0x4, 0, 0, 0, 1, 1)
+#define MPP6_PCI_CLK MPP(6, 0x5, 0, 0, 1, 0, 0)
+#define MPP6_SATA_LED MPP(6, 0x5, 0, 0, 0, 1, 0)
+
+#define MPP7_UNUSED MPP(7, 0x0, 0, 0, 1, 1, 1)
+#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1, 1, 1)
+#define MPP7_PCI_ARB MPP(7, 0x2, 0, 0, 1, 1, 1)
+#define MPP7_NAND MPP(7, 0x4, 0, 0, 0, 1, 1)
+#define MPP7_PCI_CLK MPP(7, 0x5, 0, 0, 1, 0, 0)
+#define MPP7_SATA_LED MPP(7, 0x5, 0, 0, 0, 1, 0)
+
+#define MPP8_UNUSED MPP(8, 0x0, 0, 0, 1, 1, 1)
+#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1, 1, 1)
+#define MPP8_GIGE MPP(8, 0x1, 0, 0, 1, 1, 1)
+
+#define MPP9_UNUSED MPP(9, 0x0, 0, 0, 1, 1, 1)
+#define MPP9_GPIO MPP(9, 0x0, 0, 0, 1, 1, 1)
+#define MPP9_GIGE MPP(9, 0x1, 1, 1, 1, 1, 1)
+
+#define MPP10_UNUSED MPP(10, 0x0, 0, 0, 1, 1, 1)
+#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1, 1, 1)
+#define MPP10_GIGE MPP(10, 0x1, 0, 0, 1, 1, 1)
+
+#define MPP11_UNUSED MPP(11, 0x0, 0, 0, 1, 1, 1)
+#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1, 1, 1)
+#define MPP11_GIGE MPP(11, 0x1, 0, 0, 1, 1, 1)
+
+#define MPP12_UNUSED MPP(12, 0x0, 0, 0, 1, 1, 1)
+#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1, 1, 1)
+#define MPP12_GIGE MPP(12, 0x1, 0, 0, 1, 1, 1)
+#define MPP12_NAND MPP(12, 0x4, 0, 0, 0, 1, 1)
+#define MPP12_SATA_LED MPP(12, 0x5, 0, 0, 0, 1, 0)
+
+#define MPP13_UNUSED MPP(13, 0x0, 0, 0, 1, 1, 1)
+#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1, 1, 1)
+#define MPP13_GIGE MPP(13, 0x1, 0, 0, 1, 1, 1)
+#define MPP13_NAND MPP(13, 0x4, 0, 0, 0, 1, 1)
+#define MPP13_SATA_LED MPP(13, 0x5, 0, 0, 0, 1, 0)
+
+#define MPP14_UNUSED MPP(14, 0x0, 0, 0, 1, 1, 1)
+#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1, 1, 1)
+#define MPP14_GIGE MPP(14, 0x1, 0, 0, 1, 1, 1)
+#define MPP14_NAND MPP(14, 0x4, 0, 0, 0, 1, 1)
+#define MPP14_SATA_LED MPP(14, 0x5, 0, 0, 0, 1, 0)
+
+#define MPP15_UNUSED MPP(15, 0x0, 0, 0, 1, 1, 1)
+#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1, 1, 1)
+#define MPP15_GIGE MPP(15, 0x1, 0, 0, 1, 1, 1)
+#define MPP15_NAND MPP(15, 0x4, 0, 0, 0, 1, 1)
+#define MPP15_SATA_LED MPP(15, 0x5, 0, 0, 0, 1, 0)
+
+#define MPP16_UNUSED MPP(16, 0x0, 0, 0, 1, 1, 1)
+#define MPP16_GPIO MPP(16, 0x5, 1, 1, 0, 1, 0)
+#define MPP16_GIGE MPP(16, 0x1, 0, 0, 1, 1, 1)
+#define MPP16_NAND MPP(16, 0x4, 0, 0, 0, 1, 1)
+#define MPP16_UART MPP(16, 0x0, 0, 0, 0, 1, 1)
+
+#define MPP17_UNUSED MPP(17, 0x0, 0, 0, 1, 1, 1)
+#define MPP17_GPIO MPP(17, 0x5, 1, 1, 0, 1, 0)
+#define MPP17_GIGE MPP(17, 0x1, 0, 0, 1, 1, 1)
+#define MPP17_NAND MPP(17, 0x4, 0, 0, 0, 1, 1)
+#define MPP17_UART MPP(17, 0x0, 0, 0, 0, 1, 1)
+
+#define MPP18_UNUSED MPP(18, 0x0, 0, 0, 1, 1, 1)
+#define MPP18_GPIO MPP(18, 0x5, 1, 1, 0, 1, 0)
+#define MPP18_GIGE MPP(18, 0x1, 0, 0, 1, 1, 1)
+#define MPP18_UART MPP(18, 0x0, 0, 0, 0, 1, 1)
+
+#define MPP19_UNUSED MPP(19, 0x0, 0, 0, 1, 1, 1)
+#define MPP19_GPIO MPP(19, 0x5, 1, 1, 0, 1, 0)
+#define MPP19_GIGE MPP(19, 0x1, 0, 0, 1, 1, 1)
+#define MPP19_UART MPP(19, 0x0, 0, 0, 0, 1, 1)
+
+#define MPP_MAX 19
+
+void orion5x_mpp_conf(unsigned int *mpp_list);
#endif
/****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode mss2_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Power LED */
- { 1, MPP_GPIO }, /* Error LED */
- { 2, MPP_UNUSED },
- { 3, MPP_GPIO }, /* RTC interrupt */
- { 4, MPP_GPIO }, /* HDD ind. (Single/Dual)*/
- { 5, MPP_GPIO }, /* HD0 5V control */
- { 6, MPP_GPIO }, /* HD0 12V control */
- { 7, MPP_GPIO }, /* HD1 5V control */
- { 8, MPP_GPIO }, /* HD1 12V control */
- { 9, MPP_UNUSED },
- { 10, MPP_GPIO }, /* Fan control */
- { 11, MPP_GPIO }, /* Power button */
- { 12, MPP_GPIO }, /* Reset button */
- { 13, MPP_UNUSED },
- { 14, MPP_SATA_LED }, /* SATA 0 active */
- { 15, MPP_SATA_LED }, /* SATA 1 active */
- { 16, MPP_UNUSED },
- { 17, MPP_UNUSED },
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int mss2_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Power LED */
+ MPP1_GPIO, /* Error LED */
+ MPP2_UNUSED,
+ MPP3_GPIO, /* RTC interrupt */
+ MPP4_GPIO, /* HDD ind. (Single/Dual)*/
+ MPP5_GPIO, /* HD0 5V control */
+ MPP6_GPIO, /* HD0 12V control */
+ MPP7_GPIO, /* HD1 5V control */
+ MPP8_GPIO, /* HD1 12V control */
+ MPP9_UNUSED,
+ MPP10_GPIO, /* Fan control */
+ MPP11_GPIO, /* Power button */
+ MPP12_GPIO, /* Reset button */
+ MPP13_UNUSED,
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_UNUSED,
+ MPP17_UNUSED,
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
static void __init mss2_init(void)
/****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Sys status LED */
- { 1, MPP_GPIO }, /* Sys error LED */
- { 2, MPP_GPIO }, /* OverTemp interrupt */
- { 3, MPP_GPIO }, /* RTC interrupt */
- { 4, MPP_GPIO }, /* V_LED 5V */
- { 5, MPP_GPIO }, /* V_LED 3.3V */
- { 6, MPP_UNUSED },
- { 7, MPP_UNUSED },
- { 8, MPP_GPIO }, /* SATA 0 fail LED */
- { 9, MPP_GPIO }, /* SATA 1 fail LED */
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED }, /* SATA 0 presence */
- { 13, MPP_SATA_LED }, /* SATA 1 presence */
- { 14, MPP_SATA_LED }, /* SATA 0 active */
- { 15, MPP_SATA_LED }, /* SATA 1 active */
- { 16, MPP_UNUSED },
- { 17, MPP_GPIO }, /* Reset button */
- { 18, MPP_GPIO }, /* Power button */
- { 19, MPP_GPIO }, /* Power off */
- { -1 },
+static unsigned int mv2120_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Sys status LED */
+ MPP1_GPIO, /* Sys error LED */
+ MPP2_GPIO, /* OverTemp interrupt */
+ MPP3_GPIO, /* RTC interrupt */
+ MPP4_GPIO, /* V_LED 5V */
+ MPP5_GPIO, /* V_LED 3.3V */
+ MPP6_UNUSED,
+ MPP7_UNUSED,
+ MPP8_GPIO, /* SATA 0 fail LED */
+ MPP9_GPIO, /* SATA 1 fail LED */
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_SATA_LED, /* SATA 0 presence */
+ MPP13_SATA_LED, /* SATA 1 presence */
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_UNUSED,
+ MPP17_GPIO, /* Reset button */
+ MPP18_GPIO, /* Power button */
+ MPP19_GPIO, /* Power off */
+ 0,
};
static struct i2c_board_info __initdata mv2120_i2c_rtc = {
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Raid mode (bit 0) */
- { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
- { 2, MPP_GPIO }, /* Raid mode (bit 1) */
- { 3, MPP_GPIO }, /* Board ID (bit 0) */
- { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */
- { 5, MPP_GPIO }, /* Fan fail detection */
- { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */
- { 7, MPP_GPIO }, /* Disable initial blinking on front LED */
- { 8, MPP_GPIO }, /* Rear power switch (on|auto) */
- { 9, MPP_GPIO }, /* Rear power switch (auto|off) */
- { 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */
- { 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */
- { 12, MPP_GPIO }, /* Board ID (bit 1) */
- { 13, MPP_GPIO }, /* SATA 1 blue LED blink control */
- { 14, MPP_SATA_LED },
- { 15, MPP_SATA_LED },
- { 16, MPP_GPIO }, /* Blue front LED control */
- { 17, MPP_GPIO }, /* SATA 0 blue LED blink control */
- { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */
- { 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */
- { -1 }
+static unsigned int net2big_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Raid mode (bit 0) */
+ MPP1_GPIO, /* USB port 2 fuse (0 = Fail, 1 = Ok) */
+ MPP2_GPIO, /* Raid mode (bit 1) */
+ MPP3_GPIO, /* Board ID (bit 0) */
+ MPP4_GPIO, /* Fan activity (0 = Off, 1 = On) */
+ MPP5_GPIO, /* Fan fail detection */
+ MPP6_GPIO, /* Red front LED (0 = Off, 1 = On) */
+ MPP7_GPIO, /* Disable initial blinking on front LED */
+ MPP8_GPIO, /* Rear power switch (on|auto) */
+ MPP9_GPIO, /* Rear power switch (auto|off) */
+ MPP10_GPIO, /* SATA 1 red LED (0 = Off, 1 = On) */
+ MPP11_GPIO, /* SATA 0 red LED (0 = Off, 1 = On) */
+ MPP12_GPIO, /* Board ID (bit 1) */
+ MPP13_GPIO, /* SATA 1 blue LED blink control */
+ MPP14_SATA_LED,
+ MPP15_SATA_LED,
+ MPP16_GPIO, /* Blue front LED control */
+ MPP17_GPIO, /* SATA 0 blue LED blink control */
+ MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */
+ MPP19_GPIO, /* SATA{0,1} power On/Off request */
+ 0,
/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
/* 23: SATA 0 power status */
/* 24: Board power off */
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* LED1 CardBus LED (front panel) */
- { 1, MPP_GPIO }, /* PCI_intA */
- { 2, MPP_GPIO }, /* Hard Reset / Factory Init*/
- { 3, MPP_GPIO }, /* FXS or DAA select */
- { 4, MPP_GPIO }, /* LED6 - phone LED (front panel) */
- { 5, MPP_GPIO }, /* LED5 - phone LED (front panel) */
- { 6, MPP_PCI_CLK }, /* CPU PCI refclk */
- { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */
- { 8, MPP_GPIO }, /* CardBus reset */
- { 9, MPP_GPIO }, /* GE_RXERR */
- { 10, MPP_GPIO }, /* LED2 MiniPCI LED (front panel) */
- { 11, MPP_GPIO }, /* Lifeline control */
- { 12, MPP_GIGE }, /* GE_TXD[4] */
- { 13, MPP_GIGE }, /* GE_TXD[5] */
- { 14, MPP_GIGE }, /* GE_TXD[6] */
- { 15, MPP_GIGE }, /* GE_TXD[7] */
- { 16, MPP_GIGE }, /* GE_RXD[4] */
- { 17, MPP_GIGE }, /* GE_RXD[5] */
- { 18, MPP_GIGE }, /* GE_RXD[6] */
- { 19, MPP_GIGE }, /* GE_RXD[7] */
- { -1 },
+static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* LED1 CardBus LED (front panel) */
+ MPP1_GPIO, /* PCI_intA */
+ MPP2_GPIO, /* Hard Reset / Factory Init*/
+ MPP3_GPIO, /* FXS or DAA select */
+ MPP4_GPIO, /* LED6 - phone LED (front panel) */
+ MPP5_GPIO, /* LED5 - phone LED (front panel) */
+ MPP6_PCI_CLK, /* CPU PCI refclk */
+ MPP7_PCI_CLK, /* PCI/PCIe refclk */
+ MPP8_GPIO, /* CardBus reset */
+ MPP9_GPIO, /* GE_RXERR */
+ MPP10_GPIO, /* LED2 MiniPCI LED (front panel) */
+ MPP11_GPIO, /* Lifeline control */
+ MPP12_GIGE, /* GE_TXD[4] */
+ MPP13_GIGE, /* GE_TXD[5] */
+ MPP14_GIGE, /* GE_TXD[6] */
+ MPP15_GIGE, /* GE_TXD[7] */
+ MPP16_GIGE, /* GE_RXD[4] */
+ MPP17_GIGE, /* GE_RXD[5] */
+ MPP18_GIGE, /* GE_RXD[6] */
+ MPP19_GIGE, /* GE_RXD[7] */
+ 0,
};
static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* LED1 */
- { 1, MPP_GPIO }, /* LED5 */
- { 2, MPP_GPIO }, /* LED4 */
- { 3, MPP_GPIO }, /* LED3 */
- { 4, MPP_GPIO }, /* PCI_intA */
- { 5, MPP_GPIO }, /* RTC interrupt */
- { 6, MPP_PCI_CLK }, /* CPU PCI refclk */
- { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */
- { 8, MPP_GPIO }, /* 88e6131 interrupt */
- { 9, MPP_GPIO }, /* GE_RXERR */
- { 10, MPP_GPIO }, /* PCI_intB */
- { 11, MPP_GPIO }, /* LED2 */
- { 12, MPP_GIGE }, /* GE_TXD[4] */
- { 13, MPP_GIGE }, /* GE_TXD[5] */
- { 14, MPP_GIGE }, /* GE_TXD[6] */
- { 15, MPP_GIGE }, /* GE_TXD[7] */
- { 16, MPP_GIGE }, /* GE_RXD[4] */
- { 17, MPP_GIGE }, /* GE_RXD[5] */
- { 18, MPP_GIGE }, /* GE_RXD[6] */
- { 19, MPP_GIGE }, /* GE_RXD[7] */
- { -1 },
+static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* LED1 */
+ MPP1_GPIO, /* LED5 */
+ MPP2_GPIO, /* LED4 */
+ MPP3_GPIO, /* LED3 */
+ MPP4_GPIO, /* PCI_intA */
+ MPP5_GPIO, /* RTC interrupt */
+ MPP6_PCI_CLK, /* CPU PCI refclk */
+ MPP7_PCI_CLK, /* PCI/PCIe refclk */
+ MPP8_GPIO, /* 88e6131 interrupt */
+ MPP9_GPIO, /* GE_RXERR */
+ MPP10_GPIO, /* PCI_intB */
+ MPP11_GPIO, /* LED2 */
+ MPP12_GIGE, /* GE_TXD[4] */
+ MPP13_GIGE, /* GE_TXD[5] */
+ MPP14_GIGE, /* GE_TXD[6] */
+ MPP15_GIGE, /* GE_TXD[7] */
+ MPP16_GIGE, /* GE_RXD[4] */
+ MPP17_GIGE, /* GE_RXD[5] */
+ MPP18_GIGE, /* GE_RXD[6] */
+ MPP19_GIGE, /* GE_RXD[7] */
+ 0,
};
static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode rd88f5182_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Debug Led */
- { 1, MPP_GPIO }, /* Reset Switch */
- { 2, MPP_UNUSED },
- { 3, MPP_GPIO }, /* RTC Int */
- { 4, MPP_GPIO },
- { 5, MPP_GPIO },
- { 6, MPP_GPIO }, /* PCI_intA */
- { 7, MPP_GPIO }, /* PCI_intB */
- { 8, MPP_UNUSED },
- { 9, MPP_UNUSED },
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED }, /* SATA 0 presence */
- { 13, MPP_SATA_LED }, /* SATA 1 presence */
- { 14, MPP_SATA_LED }, /* SATA 0 active */
- { 15, MPP_SATA_LED }, /* SATA 1 active */
- { 16, MPP_UNUSED },
- { 17, MPP_UNUSED },
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int rd88f5182_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Debug Led */
+ MPP1_GPIO, /* Reset Switch */
+ MPP2_UNUSED,
+ MPP3_GPIO, /* RTC Int */
+ MPP4_GPIO,
+ MPP5_GPIO,
+ MPP6_GPIO, /* PCI_intA */
+ MPP7_GPIO, /* PCI_intB */
+ MPP8_UNUSED,
+ MPP9_UNUSED,
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_SATA_LED, /* SATA 0 presence */
+ MPP13_SATA_LED, /* SATA 1 presence */
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_UNUSED,
+ MPP17_UNUSED,
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
static void __init rd88f5182_init(void)
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
.phy_addr = -1,
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode tsp2_mpp_modes[] __initdata = {
- { 0, MPP_PCIE_RST_OUTn },
- { 1, MPP_UNUSED },
- { 2, MPP_UNUSED },
- { 3, MPP_UNUSED },
- { 4, MPP_NAND }, /* BOOT NAND Flash REn */
- { 5, MPP_NAND }, /* BOOT NAND Flash WEn */
- { 6, MPP_NAND }, /* BOOT NAND Flash HREn[0] */
- { 7, MPP_NAND }, /* BOOT NAND Flash WEn[0] */
- { 8, MPP_GPIO }, /* MICON int */
- { 9, MPP_GPIO }, /* RTC int */
- { 10, MPP_UNUSED },
- { 11, MPP_GPIO }, /* PCI Int A */
- { 12, MPP_UNUSED },
- { 13, MPP_GPIO }, /* UPS on UART0 enable */
- { 14, MPP_GPIO }, /* UPS low battery detection */
- { 15, MPP_UNUSED },
- { 16, MPP_UART }, /* UART1 RXD */
- { 17, MPP_UART }, /* UART1 TXD */
- { 18, MPP_UART }, /* UART1 CTSn */
- { 19, MPP_UART }, /* UART1 RTSn */
- { -1 },
+static unsigned int tsp2_mpp_modes[] __initdata = {
+ MPP0_PCIE_RST_OUTn,
+ MPP1_UNUSED,
+ MPP2_UNUSED,
+ MPP3_UNUSED,
+ MPP4_NAND, /* BOOT NAND Flash REn */
+ MPP5_NAND, /* BOOT NAND Flash WEn */
+ MPP6_NAND, /* BOOT NAND Flash HREn[0] */
+ MPP7_NAND, /* BOOT NAND Flash WEn[0] */
+ MPP8_GPIO, /* MICON int */
+ MPP9_GPIO, /* RTC int */
+ MPP10_UNUSED,
+ MPP11_GPIO, /* PCI Int A */
+ MPP12_UNUSED,
+ MPP13_GPIO, /* UPS on UART0 enable */
+ MPP14_GPIO, /* UPS low battery detection */
+ MPP15_UNUSED,
+ MPP16_UART, /* UART1 RXD */
+ MPP17_UART, /* UART1 TXD */
+ MPP18_UART, /* UART1 CTSn */
+ MPP19_UART, /* UART1 RTSn */
+ 0,
};
static void __init tsp2_init(void)
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = {
- { 0, MPP_UNUSED },
- { 1, MPP_GPIO }, /* USB copy button */
- { 2, MPP_GPIO }, /* Load defaults button */
- { 3, MPP_GPIO }, /* GPIO RTC */
- { 4, MPP_UNUSED },
- { 5, MPP_UNUSED },
- { 6, MPP_GPIO }, /* PCI Int A */
- { 7, MPP_GPIO }, /* PCI Int B */
- { 8, MPP_UNUSED },
- { 9, MPP_UNUSED },
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED },
- { 12, MPP_SATA_LED }, /* SATA 0 presence */
- { 13, MPP_SATA_LED }, /* SATA 1 presence */
- { 14, MPP_SATA_LED }, /* SATA 0 active */
- { 15, MPP_SATA_LED }, /* SATA 1 active */
- { 16, MPP_UART }, /* UART1 RXD */
- { 17, MPP_UART }, /* UART1 TXD */
- { 18, MPP_GPIO }, /* SW_RST */
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int ts209_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_GPIO, /* USB copy button */
+ MPP2_GPIO, /* Load defaults button */
+ MPP3_GPIO, /* GPIO RTC */
+ MPP4_UNUSED,
+ MPP5_UNUSED,
+ MPP6_GPIO, /* PCI Int A */
+ MPP7_GPIO, /* PCI Int B */
+ MPP8_UNUSED,
+ MPP9_UNUSED,
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_SATA_LED, /* SATA 0 presence */
+ MPP13_SATA_LED, /* SATA 1 presence */
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_UART, /* UART1 RXD */
+ MPP17_UART, /* UART1 TXD */
+ MPP18_GPIO, /* SW_RST */
+ MPP19_UNUSED,
+ 0,
};
static void __init qnap_ts209_init(void)
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = {
- { 0, MPP_UNUSED },
- { 1, MPP_UNUSED },
- { 2, MPP_UNUSED },
- { 3, MPP_UNUSED },
- { 4, MPP_GPIO }, /* HDD 1 status */
- { 5, MPP_GPIO }, /* HDD 2 status */
- { 6, MPP_GPIO }, /* HDD 3 status */
- { 7, MPP_GPIO }, /* HDD 4 status */
- { 8, MPP_UNUSED },
- { 9, MPP_UNUSED },
- { 10, MPP_GPIO }, /* RTC int */
- { 11, MPP_UNUSED },
- { 12, MPP_UNUSED },
- { 13, MPP_UNUSED },
- { 14, MPP_GPIO }, /* SW_RST */
- { 15, MPP_GPIO }, /* USB copy button */
- { 16, MPP_UART }, /* UART1 RXD */
- { 17, MPP_UART }, /* UART1 TXD */
- { 18, MPP_UNUSED },
- { 19, MPP_UNUSED },
- { -1 },
+static unsigned int ts409_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_UNUSED,
+ MPP2_UNUSED,
+ MPP3_UNUSED,
+ MPP4_GPIO, /* HDD 1 status */
+ MPP5_GPIO, /* HDD 2 status */
+ MPP6_GPIO, /* HDD 3 status */
+ MPP7_GPIO, /* HDD 4 status */
+ MPP8_UNUSED,
+ MPP9_UNUSED,
+ MPP10_GPIO, /* RTC int */
+ MPP11_UNUSED,
+ MPP12_UNUSED,
+ MPP13_UNUSED,
+ MPP14_GPIO, /* SW_RST */
+ MPP15_GPIO, /* USB copy button */
+ MPP16_UART, /* UART1 RXD */
+ MPP17_UART, /* UART1 TXD */
+ MPP18_UNUSED,
+ MPP19_UNUSED,
+ 0,
};
static void __init qnap_ts409_init(void)
/*****************************************************************************
* General Setup
****************************************************************************/
-static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
- { 0, MPP_UNUSED },
- { 1, MPP_GPIO }, /* JTAG Clock */
- { 2, MPP_GPIO }, /* JTAG Data In */
- { 3, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB2B */
- { 4, MPP_GPIO }, /* JTAG Data Out */
- { 5, MPP_GPIO }, /* JTAG TMS */
- { 6, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */
- { 7, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB22B */
- { 8, MPP_UNUSED },
- { 9, MPP_UNUSED },
- { 10, MPP_UNUSED },
- { 11, MPP_UNUSED },
- { 12, MPP_UNUSED },
- { 13, MPP_UNUSED },
- { 14, MPP_UNUSED },
- { 15, MPP_UNUSED },
- { 16, MPP_UART },
- { 17, MPP_UART },
- { 18, MPP_UART },
- { 19, MPP_UART },
+static unsigned int ts78xx_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_GPIO, /* JTAG Clock */
+ MPP2_GPIO, /* JTAG Data In */
+ MPP3_GPIO, /* Lat ECP2 256 FPGA - PB2B */
+ MPP4_GPIO, /* JTAG Data Out */
+ MPP5_GPIO, /* JTAG TMS */
+ MPP6_GPIO, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */
+ MPP7_GPIO, /* Lat ECP2 256 FPGA - PB22B */
+ MPP8_UNUSED,
+ MPP9_UNUSED,
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_UNUSED,
+ MPP13_UNUSED,
+ MPP14_UNUSED,
+ MPP15_UNUSED,
+ MPP16_UART,
+ MPP17_UART,
+ MPP18_UART,
+ MPP19_UART,
/*
* MPP[20] PCI Clock Out 1
* MPP[21] PCI Clock Out 0
* MPP[24] Unused
* MPP[25] Unused
*/
- { -1 },
+ 0,
};
static void __init ts78xx_init(void)
#include "common.h"
#include "mpp.h"
-static struct orion5x_mpp_mode wnr854t_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Power LED green (0=on) */
- { 1, MPP_GPIO }, /* Reset Button (0=off) */
- { 2, MPP_GPIO }, /* Power LED blink (0=off) */
- { 3, MPP_GPIO }, /* WAN Status LED amber (0=off) */
- { 4, MPP_GPIO }, /* PCI int */
- { 5, MPP_GPIO }, /* ??? */
- { 6, MPP_GPIO }, /* ??? */
- { 7, MPP_GPIO }, /* ??? */
- { 8, MPP_UNUSED }, /* ??? */
- { 9, MPP_GIGE }, /* GE_RXERR */
- { 10, MPP_UNUSED }, /* ??? */
- { 11, MPP_UNUSED }, /* ??? */
- { 12, MPP_GIGE }, /* GE_TXD[4] */
- { 13, MPP_GIGE }, /* GE_TXD[5] */
- { 14, MPP_GIGE }, /* GE_TXD[6] */
- { 15, MPP_GIGE }, /* GE_TXD[7] */
- { 16, MPP_GIGE }, /* GE_RXD[4] */
- { 17, MPP_GIGE }, /* GE_RXD[5] */
- { 18, MPP_GIGE }, /* GE_RXD[6] */
- { 19, MPP_GIGE }, /* GE_RXD[7] */
- { -1 },
+static unsigned int wnr854t_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Power LED green (0=on) */
+ MPP1_GPIO, /* Reset Button (0=off) */
+ MPP2_GPIO, /* Power LED blink (0=off) */
+ MPP3_GPIO, /* WAN Status LED amber (0=off) */
+ MPP4_GPIO, /* PCI int */
+ MPP5_GPIO, /* ??? */
+ MPP6_GPIO, /* ??? */
+ MPP7_GPIO, /* ??? */
+ MPP8_UNUSED, /* ??? */
+ MPP9_GIGE, /* GE_RXERR */
+ MPP10_UNUSED, /* ??? */
+ MPP11_UNUSED, /* ??? */
+ MPP12_GIGE, /* GE_TXD[4] */
+ MPP13_GIGE, /* GE_TXD[5] */
+ MPP14_GIGE, /* GE_TXD[6] */
+ MPP15_GIGE, /* GE_TXD[7] */
+ MPP16_GIGE, /* GE_RXD[4] */
+ MPP17_GIGE, /* GE_RXD[5] */
+ MPP18_GIGE, /* GE_RXD[6] */
+ MPP19_GIGE, /* GE_RXD[7] */
+ 0,
};
/*
/*
* General setup
*/
-static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
- { 0, MPP_GPIO }, /* Power LED green (0=on) */
- { 1, MPP_GPIO }, /* Security LED (0=on) */
- { 2, MPP_GPIO }, /* Internal Button (0=on) */
- { 3, MPP_GPIO }, /* Reset Button (0=on) */
- { 4, MPP_GPIO }, /* PCI int */
- { 5, MPP_GPIO }, /* Power LED orange (0=on) */
- { 6, MPP_GPIO }, /* USB LED (0=on) */
- { 7, MPP_GPIO }, /* Wireless LED (0=on) */
- { 8, MPP_UNUSED }, /* ??? */
- { 9, MPP_GIGE }, /* GE_RXERR */
- { 10, MPP_UNUSED }, /* ??? */
- { 11, MPP_UNUSED }, /* ??? */
- { 12, MPP_GIGE }, /* GE_TXD[4] */
- { 13, MPP_GIGE }, /* GE_TXD[5] */
- { 14, MPP_GIGE }, /* GE_TXD[6] */
- { 15, MPP_GIGE }, /* GE_TXD[7] */
- { 16, MPP_GIGE }, /* GE_RXD[4] */
- { 17, MPP_GIGE }, /* GE_RXD[5] */
- { 18, MPP_GIGE }, /* GE_RXD[6] */
- { 19, MPP_GIGE }, /* GE_RXD[7] */
- { -1 },
+static unsigned int wrt350n_v2_mpp_modes[] __initdata = {
+ MPP0_GPIO, /* Power LED green (0=on) */
+ MPP1_GPIO, /* Security LED (0=on) */
+ MPP2_GPIO, /* Internal Button (0=on) */
+ MPP3_GPIO, /* Reset Button (0=on) */
+ MPP4_GPIO, /* PCI int */
+ MPP5_GPIO, /* Power LED orange (0=on) */
+ MPP6_GPIO, /* USB LED (0=on) */
+ MPP7_GPIO, /* Wireless LED (0=on) */
+ MPP8_UNUSED, /* ??? */
+ MPP9_GIGE, /* GE_RXERR */
+ MPP10_UNUSED, /* ??? */
+ MPP11_UNUSED, /* ??? */
+ MPP12_GIGE, /* GE_TXD[4] */
+ MPP13_GIGE, /* GE_TXD[5] */
+ MPP14_GIGE, /* GE_TXD[6] */
+ MPP15_GIGE, /* GE_TXD[7] */
+ MPP16_GIGE, /* GE_RXD[4] */
+ MPP17_GIGE, /* GE_RXD[5] */
+ MPP18_GIGE, /* GE_RXD[6] */
+ MPP19_GIGE, /* GE_RXD[7] */
+ 0,
};
/*
projects / mirror_ubuntu-artful-kernel.git / commitdiff