#undef __SMU_DUMMY_MAP
#define __SMU_DUMMY_MAP(type) #type
-static const char* __smu_message_names[] = {
+static const char * const __smu_message_names[] = {
SMU_MESSAGE_TYPES
};
*arg = RREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_82);
}
-int smu_cmn_wait_for_response(struct smu_context *smu)
+/* Redefine the SMU error codes here.
+ *
+ * Note that these definitions are redundant and should be removed
+ * when the SMU has exported a unified header file containing these
+ * macros, which header file we can just include and use the SMU's
+ * macros. At the moment, these error codes are defined by the SMU
+ * per-ASIC unfortunately, yet we're a one driver for all ASICs.
+ */
+#define SMU_RESP_NONE 0
+#define SMU_RESP_OK 1
+#define SMU_RESP_CMD_FAIL 0xFF
+#define SMU_RESP_CMD_UNKNOWN 0xFE
+#define SMU_RESP_CMD_BAD_PREREQ 0xFD
+#define SMU_RESP_BUSY_OTHER 0xFC
+#define SMU_RESP_DEBUG_END 0xFB
+
+/**
+ * __smu_cmn_poll_stat -- poll for a status from the SMU
+ * smu: a pointer to SMU context
+ *
+ * Returns the status of the SMU, which could be,
+ * 0, the SMU is busy with your previous command;
+ * 1, execution status: success, execution result: success;
+ * 0xFF, execution status: success, execution result: failure;
+ * 0xFE, unknown command;
+ * 0xFD, valid command, but bad (command) prerequisites;
+ * 0xFC, the command was rejected as the SMU is busy;
+ * 0xFB, "SMC_Result_DebugDataDumpEnd".
+ *
+ * The values here are not defined by macros, because I'd rather we
+ * include a single header file which defines them, which is
+ * maintained by the SMU FW team, so that we're impervious to firmware
+ * changes. At the moment those values are defined in various header
+ * files, one for each ASIC, yet here we're a single ASIC-agnostic
+ * interface. Such a change can be followed-up by a subsequent patch.
+ */
+static u32 __smu_cmn_poll_stat(struct smu_context *smu)
{
struct amdgpu_device *adev = smu->adev;
- uint32_t cur_value, i, timeout = adev->usec_timeout * 20;
+ int timeout = adev->usec_timeout * 20;
+ u32 reg;
- for (i = 0; i < timeout; i++) {
- cur_value = RREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_90);
- if ((cur_value & MP1_C2PMSG_90__CONTENT_MASK) != 0)
- return cur_value;
+ for ( ; timeout > 0; timeout--) {
+ reg = RREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_90);
+ if ((reg & MP1_C2PMSG_90__CONTENT_MASK) != 0)
+ break;
udelay(1);
}
- /* timeout means wrong logic */
- if (i == timeout)
- return -ETIME;
-
- return RREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_90);
+ return reg;
}
-int smu_cmn_send_msg_without_waiting(struct smu_context *smu,
- uint16_t msg, uint32_t param)
+static void __smu_cmn_reg_print_error(struct smu_context *smu,
+ u32 reg_c2pmsg_90,
+ int msg_index,
+ u32 param,
+ enum smu_message_type msg)
{
struct amdgpu_device *adev = smu->adev;
- int ret;
+ const char *message = smu_get_message_name(smu, msg);
- ret = smu_cmn_wait_for_response(smu);
- if (ret != 0x1) {
- dev_err(adev->dev, "Msg issuing pre-check failed(0x%x) and "
- "SMU may be not in the right state!\n", ret);
- if (ret != -ETIME)
- ret = -EIO;
- return ret;
+ switch (reg_c2pmsg_90) {
+ case SMU_RESP_NONE:
+ dev_err_ratelimited(adev->dev,
+ "SMU: I'm not done with your previous command!");
+ break;
+ case SMU_RESP_OK:
+ /* The SMU executed the command. It completed with a
+ * successful result.
+ */
+ break;
+ case SMU_RESP_CMD_FAIL:
+ /* The SMU executed the command. It completed with an
+ * unsuccessful result.
+ */
+ break;
+ case SMU_RESP_CMD_UNKNOWN:
+ dev_err_ratelimited(adev->dev,
+ "SMU: unknown command: index:%d param:0x%08X message:%s",
+ msg_index, param, message);
+ break;
+ case SMU_RESP_CMD_BAD_PREREQ:
+ dev_err_ratelimited(adev->dev,
+ "SMU: valid command, bad prerequisites: index:%d param:0x%08X message:%s",
+ msg_index, param, message);
+ break;
+ case SMU_RESP_BUSY_OTHER:
+ dev_err_ratelimited(adev->dev,
+ "SMU: I'm very busy for your command: index:%d param:0x%08X message:%s",
+ msg_index, param, message);
+ break;
+ case SMU_RESP_DEBUG_END:
+ dev_err_ratelimited(adev->dev,
+ "SMU: I'm debugging!");
+ break;
+ default:
+ dev_err_ratelimited(adev->dev,
+ "SMU: response:0x%08X for index:%d param:0x%08X message:%s?",
+ reg_c2pmsg_90, msg_index, param, message);
+ break;
+ }
+}
+
+static int __smu_cmn_reg2errno(struct smu_context *smu, u32 reg_c2pmsg_90)
+{
+ int res;
+
+ switch (reg_c2pmsg_90) {
+ case SMU_RESP_NONE:
+ /* The SMU is busy--still executing your command.
+ */
+ res = -ETIME;
+ break;
+ case SMU_RESP_OK:
+ res = 0;
+ break;
+ case SMU_RESP_CMD_FAIL:
+ /* Command completed successfully, but the command
+ * status was failure.
+ */
+ res = -EIO;
+ break;
+ case SMU_RESP_CMD_UNKNOWN:
+ /* Unknown command--ignored by the SMU.
+ */
+ res = -EOPNOTSUPP;
+ break;
+ case SMU_RESP_CMD_BAD_PREREQ:
+ /* Valid command--bad prerequisites.
+ */
+ res = -EINVAL;
+ break;
+ case SMU_RESP_BUSY_OTHER:
+ /* The SMU is busy with other commands. The client
+ * should retry in 10 us.
+ */
+ res = -EBUSY;
+ break;
+ default:
+ /* Unknown or debug response from the SMU.
+ */
+ res = -EREMOTEIO;
+ break;
}
+ return res;
+}
+
+static void __smu_cmn_send_msg(struct smu_context *smu,
+ u16 msg,
+ u32 param)
+{
+ struct amdgpu_device *adev = smu->adev;
+
WREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_90, 0);
WREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_82, param);
WREG32_SOC15(MP1, 0, mmMP1_SMN_C2PMSG_66, msg);
+}
- return 0;
+/**
+ * smu_cmn_send_msg_without_waiting -- send the message; don't wait for status
+ * @smu: pointer to an SMU context
+ * @msg_index: message index
+ * @param: message parameter to send to the SMU
+ *
+ * Send a message to the SMU with the parameter passed. Do not wait
+ * for status/result of the message, thus the "without_waiting".
+ *
+ * Return 0 on success, -errno on error if we weren't able to _send_
+ * the message for some reason. See __smu_cmn_reg2errno() for details
+ * of the -errno.
+ */
+int smu_cmn_send_msg_without_waiting(struct smu_context *smu,
+ uint16_t msg_index,
+ uint32_t param)
+{
+ u32 reg;
+ int res;
+
+ if (smu->adev->no_hw_access)
+ return 0;
+
+ mutex_lock(&smu->message_lock);
+ reg = __smu_cmn_poll_stat(smu);
+ res = __smu_cmn_reg2errno(smu, reg);
+ if (reg == SMU_RESP_NONE ||
+ reg == SMU_RESP_BUSY_OTHER ||
+ res == -EREMOTEIO)
+ goto Out;
+ __smu_cmn_send_msg(smu, msg_index, param);
+ res = 0;
+Out:
+ mutex_unlock(&smu->message_lock);
+ return res;
}
+/**
+ * smu_cmn_wait_for_response -- wait for response from the SMU
+ * @smu: pointer to an SMU context
+ *
+ * Wait for status from the SMU.
+ *
+ * Return 0 on success, -errno on error, indicating the execution
+ * status and result of the message being waited for. See
+ * __smu_cmn_reg2errno() for details of the -errno.
+ */
+int smu_cmn_wait_for_response(struct smu_context *smu)
+{
+ u32 reg;
+
+ reg = __smu_cmn_poll_stat(smu);
+ return __smu_cmn_reg2errno(smu, reg);
+}
+
+/**
+ * smu_cmn_send_smc_msg_with_param -- send a message with parameter
+ * @smu: pointer to an SMU context
+ * @msg: message to send
+ * @param: parameter to send to the SMU
+ * @read_arg: pointer to u32 to return a value from the SMU back
+ * to the caller
+ *
+ * Send the message @msg with parameter @param to the SMU, wait for
+ * completion of the command, and return back a value from the SMU in
+ * @read_arg pointer.
+ *
+ * Return 0 on success, -errno on error, if we weren't able to send
+ * the message or if the message completed with some kind of
+ * error. See __smu_cmn_reg2errno() for details of the -errno.
+ *
+ * If we weren't able to send the message to the SMU, we also print
+ * the error to the standard log.
+ *
+ * Command completion status is printed only if the -errno is
+ * -EREMOTEIO, indicating that the SMU returned back an
+ * undefined/unknown/unspecified result. All other cases are
+ * well-defined, not printed, but instead given back to the client to
+ * decide what further to do.
+ *
+ * The return value, @read_arg is read back regardless, to give back
+ * more information to the client, which on error would most likely be
+ * @param, but we can't assume that. This also eliminates more
+ * conditionals.
+ */
int smu_cmn_send_smc_msg_with_param(struct smu_context *smu,
enum smu_message_type msg,
uint32_t param,
uint32_t *read_arg)
{
- struct amdgpu_device *adev = smu->adev;
- int ret = 0, index = 0;
+ int res, index;
+ u32 reg;
if (smu->adev->no_hw_access)
return 0;
return index == -EACCES ? 0 : index;
mutex_lock(&smu->message_lock);
- ret = smu_cmn_send_msg_without_waiting(smu, (uint16_t)index, param);
- if (ret)
- goto out;
-
- ret = smu_cmn_wait_for_response(smu);
- if (ret != 0x1) {
- if (ret == -ETIME) {
- dev_err(adev->dev, "message: %15s (%d) \tparam: 0x%08x is timeout (no response)\n",
- smu_get_message_name(smu, msg), index, param);
- } else {
- dev_err(adev->dev, "failed send message: %15s (%d) \tparam: 0x%08x response %#x\n",
- smu_get_message_name(smu, msg), index, param,
- ret);
- ret = -EIO;
- }
- goto out;
+ reg = __smu_cmn_poll_stat(smu);
+ res = __smu_cmn_reg2errno(smu, reg);
+ if (reg == SMU_RESP_NONE ||
+ reg == SMU_RESP_BUSY_OTHER ||
+ res == -EREMOTEIO) {
+ __smu_cmn_reg_print_error(smu, reg, index, param, msg);
+ goto Out;
}
-
+ __smu_cmn_send_msg(smu, (uint16_t) index, param);
+ reg = __smu_cmn_poll_stat(smu);
+ res = __smu_cmn_reg2errno(smu, reg);
+ if (res == -EREMOTEIO)
+ __smu_cmn_reg_print_error(smu, reg, index, param, msg);
if (read_arg)
smu_cmn_read_arg(smu, read_arg);
-
- ret = 0; /* 0 as driver return value */
-out:
+Out:
mutex_unlock(&smu->message_lock);
- return ret;
+ return res;
}
int smu_cmn_send_smc_msg(struct smu_context *smu,
projects / mirror_ubuntu-kernels.git / commitdiff