semaphore to mutex conversion.
the conversion was generated via scripts, and the result was validated
automatically via a script as well.
build tested.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
extern struct i2c_adapter amd756_smbus;
static struct i2c_algorithm *s4882_algo;
/* Wrapper access functions for multiplexed SMBus */
-static struct semaphore amd756_lock;
+static struct mutex amd756_lock;
static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write,
|| addr == 0x18)
return -1;
- down(&amd756_lock);
+ mutex_lock(&amd756_lock);
error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write,
command, size, data);
- up(&amd756_lock);
+ mutex_unlock(&amd756_lock);
return error;
}
if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30)
return -1;
- down(&amd756_lock);
+ mutex_lock(&amd756_lock);
if (last_channels != channels) {
union i2c_smbus_data mplxdata;
command, size, data);
UNLOCK:
- up(&amd756_lock);
+ mutex_unlock(&amd756_lock);
return error;
}
}
printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4882\n");
- init_MUTEX(&amd756_lock);
+ mutex_init(&amd756_lock);
/* Define the 5 virtual adapters and algorithms structures */
if (!(s4882_adapter = kzalloc(5 * sizeof(struct i2c_adapter),
static int __init i2c_isa_init(void)
{
- init_MUTEX(&isa_adapter.clist_lock);
+ mutex_init(&isa_adapter.clist_lock);
INIT_LIST_HEAD(&isa_adapter.clients);
isa_adapter.nr = ANY_I2C_ISA_BUS;
#include <linux/sched.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
/* Each client has this additional data */
struct eeprom_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct mutex update_lock;
u8 valid; /* bitfield, bit!=0 if slice is valid */
unsigned long last_updated[8]; /* In jiffies, 8 slices */
u8 data[EEPROM_SIZE]; /* Register values */
struct eeprom_data *data = i2c_get_clientdata(client);
int i, j;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (!(data->valid & (1 << slice)) ||
time_after(jiffies, data->last_updated[slice] + 300 * HZ)) {
data->valid |= (1 << slice);
}
exit:
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
static ssize_t eeprom_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
/* Fill in the remaining client fields */
strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE);
data->valid = 0;
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
data->nature = UNKNOWN;
/* Tell the I2C layer a new client has arrived */
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
static unsigned short normal_i2c[] = {I2C_CLIENT_END};
/* Each client has this additional data */
struct max6875_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct mutex update_lock;
u32 valid;
u8 data[USER_EEPROM_SIZE];
if (slice >= USER_EEPROM_SLICES)
return;
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
buf = &data->data[slice << SLICE_BITS];
data->valid |= (1 << slice);
}
exit_up:
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
}
static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off,
real_client->driver = &max6875_driver;
real_client->flags = 0;
strlcpy(real_client->name, "max6875", I2C_NAME_SIZE);
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Init fake client data */
/* set the client data to the i2c_client so that it will get freed */
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
struct pcf8591_data {
struct i2c_client client;
- struct semaphore update_lock;
+ struct mutex update_lock;
u8 control;
u8 aout;
struct pcf8591_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if (val)
data->control |= PCF8591_CONTROL_AOEF;
else
data->control &= ~PCF8591_CONTROL_AOEF;
i2c_smbus_write_byte(client, data->control);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
return count;
}
/* Fill in the remaining client fields and put it into the global
list */
strlcpy(new_client->name, "pcf8591", I2C_NAME_SIZE);
- init_MUTEX(&data->update_lock);
+ mutex_init(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
struct i2c_client *client = to_i2c_client(dev);
struct pcf8591_data *data = i2c_get_clientdata(client);
- down(&data->update_lock);
+ mutex_lock(&data->update_lock);
if ((data->control & PCF8591_CONTROL_AICH_MASK) != channel) {
data->control = (data->control & ~PCF8591_CONTROL_AICH_MASK)
}
value = i2c_smbus_read_byte(client);
- up(&data->update_lock);
+ mutex_unlock(&data->update_lock);
if ((channel == 2 && input_mode == 2) ||
(channel != 3 && (input_mode == 1 || input_mode == 3)))
#include <linux/suspend.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/mutex.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
struct tps65010 {
struct i2c_client client;
- struct semaphore lock;
+ struct mutex lock;
int irq;
struct work_struct work;
struct dentry *file;
seq_printf(s, "driver %s\nversion %s\nchip %s\n\n",
DRIVER_NAME, DRIVER_VERSION, chip);
- down(&tps->lock);
+ mutex_lock(&tps->lock);
/* FIXME how can we tell whether a battery is present?
* likely involves a charge gauging chip (like BQ26501).
(v2 & (1 << (4 + i))) ? "rising" : "falling");
}
- up(&tps->lock);
+ mutex_unlock(&tps->lock);
return 0;
}
{
struct tps65010 *tps = _tps;
- down(&tps->lock);
+ mutex_lock(&tps->lock);
tps65010_interrupt(tps);
if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
enable_irq(tps->irq);
- up(&tps->lock);
+ mutex_unlock(&tps->lock);
}
static irqreturn_t tps65010_irq(int irq, void *_tps, struct pt_regs *regs)
if (!tps)
return 0;
- init_MUTEX(&tps->lock);
+ mutex_init(&tps->lock);
INIT_WORK(&tps->work, tps65010_work, tps);
tps->irq = -1;
tps->client.addr = address;
if ((gpio < GPIO1) || (gpio > GPIO4))
return -EINVAL;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
defgpio = i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO);
gpio, value ? "high" : "low",
i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
EXPORT_SYMBOL(tps65010_set_gpio_out_value);
led = LED2;
}
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led,
i2c_smbus_read_byte_data(&the_tps->client,
default:
printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
DRIVER_NAME);
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return -EINVAL;
}
if (status != 0) {
printk(KERN_ERR "%s: Failed to write led%i_on register\n",
DRIVER_NAME, led);
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
if (status != 0) {
printk(KERN_ERR "%s: Failed to write led%i_per register\n",
DRIVER_NAME, led);
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
i2c_smbus_read_byte_data(&the_tps->client,
TPS_LED1_PER + offs));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
if (!the_tps)
return -ENODEV;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
vdcdc2 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC2);
vdcdc2 &= ~(1 << 1);
pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
EXPORT_SYMBOL(tps65010_set_vib);
if (!the_tps)
return -ENODEV;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
mode ? "enable" : "disable",
pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
if (!the_tps)
return -ENODEV;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
if (!the_tps || the_tps->por)
return -ENODEV;
- down(&the_tps->lock);
+ mutex_lock(&the_tps->lock);
pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
DRIVER_NAME,
if (status != 0) {
printk(KERN_ERR "%s: Failed to write chconfig register\n",
DRIVER_NAME);
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
- up(&the_tps->lock);
+ mutex_unlock(&the_tps->lock);
return status;
}
}
adap->nr = id & MAX_ID_MASK;
- init_MUTEX(&adap->bus_lock);
- init_MUTEX(&adap->clist_lock);
+ mutex_init(&adap->bus_lock);
+ mutex_init(&adap->clist_lock);
list_add_tail(&adap->list,&adapters);
INIT_LIST_HEAD(&adap->clients);
{
int rval;
- down(&adapter->clist_lock);
+ mutex_lock(&adapter->clist_lock);
rval = __i2c_check_addr(adapter, addr);
- up(&adapter->clist_lock);
+ mutex_unlock(&adapter->clist_lock);
return rval;
}
{
struct i2c_adapter *adapter = client->adapter;
- down(&adapter->clist_lock);
+ mutex_lock(&adapter->clist_lock);
if (__i2c_check_addr(client->adapter, client->addr)) {
- up(&adapter->clist_lock);
+ mutex_unlock(&adapter->clist_lock);
return -EBUSY;
}
list_add_tail(&client->list,&adapter->clients);
- up(&adapter->clist_lock);
+ mutex_unlock(&adapter->clist_lock);
if (adapter->client_register) {
if (adapter->client_register(client)) {
}
}
- down(&adapter->clist_lock);
+ mutex_lock(&adapter->clist_lock);
list_del(&client->list);
init_completion(&client->released);
device_remove_file(&client->dev, &dev_attr_client_name);
device_unregister(&client->dev);
- up(&adapter->clist_lock);
+ mutex_unlock(&adapter->clist_lock);
wait_for_completion(&client->released);
out:
struct list_head *item;
struct i2c_client *client;
- down(&adap->clist_lock);
+ mutex_lock(&adap->clist_lock);
list_for_each(item,&adap->clients) {
client = list_entry(item, struct i2c_client, list);
if (!try_module_get(client->driver->driver.owner))
continue;
if (NULL != client->driver->command) {
- up(&adap->clist_lock);
+ mutex_unlock(&adap->clist_lock);
client->driver->command(client,cmd,arg);
- down(&adap->clist_lock);
+ mutex_lock(&adap->clist_lock);
}
module_put(client->driver->driver.owner);
}
- up(&adap->clist_lock);
+ mutex_unlock(&adap->clist_lock);
}
static int __init i2c_init(void)
}
#endif
- down(&adap->bus_lock);
+ mutex_lock(&adap->bus_lock);
ret = adap->algo->master_xfer(adap,msgs,num);
- up(&adap->bus_lock);
+ mutex_unlock(&adap->bus_lock);
return ret;
} else {
flags &= I2C_M_TEN | I2C_CLIENT_PEC;
if (adapter->algo->smbus_xfer) {
- down(&adapter->bus_lock);
+ mutex_lock(&adapter->bus_lock);
res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write,
command,size,data);
- up(&adapter->bus_lock);
+ mutex_unlock(&adapter->bus_lock);
} else
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
command,size,data);
#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
#include <linux/sched.h> /* for completion */
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
/* --- For i2c-isa ---------------------------------------------------- */
int (*client_unregister)(struct i2c_client *);
/* data fields that are valid for all devices */
- struct semaphore bus_lock;
- struct semaphore clist_lock;
+ struct mutex bus_lock;
+ struct mutex clist_lock;
int timeout;
int retries;
projects / mirror_ubuntu-zesty-kernel.git / commitdiff