When it has more than one restart_work queued meanwhile, the 2nd
restart_work is very easy to break the 1st restart work and lead
recovery fail.
Add a flag to allow only one restart work running untill
device successfully recovered.
It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this
flag again, because it is clear in ath10k_core_start. The function
ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do
many things and drv_start(call to ath10k_core_start) is 1st thing,
when drv_start complete, it does not mean restart complete. So it
add new flag and clear it in ath10k_reconfig_complete, because it
is the last thing called from drv_reconfig_complete of function
ieee80211_reconfig, after it, the restart process finished.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com
return 0;
}
+void ath10k_core_start_recovery(struct ath10k *ar)
+{
+ if (test_and_set_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags)) {
+ ath10k_warn(ar, "already restarting\n");
+ return;
+ }
+
+ queue_work(ar->workqueue, &ar->restart_work);
+}
+EXPORT_SYMBOL(ath10k_core_start_recovery);
+
static void ath10k_core_restart(struct work_struct *work)
{
struct ath10k *ar = container_of(work, struct ath10k, restart_work);
/* Per Station statistics service */
ATH10K_FLAG_PEER_STATS,
+
+ /* Indicates that ath10k device is during recovery process and not complete */
+ ATH10K_FLAG_RESTARTING,
};
enum ath10k_cal_mode {
const struct ath10k_fw_components *fw_components);
int ath10k_wait_for_suspend(struct ath10k *ar, u32 suspend_opt);
void ath10k_core_stop(struct ath10k *ar);
+void ath10k_core_start_recovery(struct ath10k *ar);
int ath10k_core_register(struct ath10k *ar,
const struct ath10k_bus_params *bus_params);
void ath10k_core_unregister(struct ath10k *ar);
ret = ath10k_debug_fw_assert(ar);
} else if (!strcmp(buf, "hw-restart")) {
ath10k_info(ar, "user requested hw restart\n");
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
ret = 0;
} else {
ret = -EINVAL;
}
} else {
ath10k_info(ar, "restarting firmware due to btcoex change");
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
}
if (val)
ath10k_info(ar, "restarting firmware due to Peer stats change");
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
ret = count;
exit:
ath10k_info(ar, "device successfully recovered\n");
ar->state = ATH10K_STATE_ON;
ieee80211_wake_queues(ar->hw);
+ clear_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags);
}
mutex_unlock(&ar->conf_mutex);
mutex_unlock(&ar->dump_mutex);
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
}
static void ath10k_pci_fw_crashed_dump(struct ath10k *ar)
ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH);
ret = -ENOMEM;
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
ath10k_warn(ar, "exceeds length, start recovery\n");
goto err;
ret = ath10k_sdio_read(ar, MBOX_HOST_INT_STATUS_ADDRESS,
irq_proc_reg, sizeof(*irq_proc_reg));
if (ret) {
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
ath10k_warn(ar, "read int status fail, start recovery\n");
goto out;
}
ath10k_sdio_enable_intrs(ar);
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
}
static int ath10k_sdio_probe(struct sdio_func *func,
switch (type) {
case ATH10K_QMI_EVENT_FW_READY_IND:
if (test_bit(ATH10K_SNOC_FLAG_REGISTERED, &ar_snoc->flags)) {
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
break;
}
if (ret == -EAGAIN) {
ath10k_warn(ar, "wmi command %d timeout, restarting hardware\n",
cmd_id);
- queue_work(ar->workqueue, &ar->restart_work);
+ ath10k_core_start_recovery(ar);
}
return ret;