The USB PHYs are supplied via MC13892 VUSB regulator rail,
so properly describe this in the device tree.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
clocks = <&clks IMX5_CLK_DUMMY>;
clock-names = "main_clk";
reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vusb_reg>;
#phy-cells = <0>;
};
};
regulator-max-microvolt = <3150000>;
};
+ vusb_reg: vusb {
+ regulator-boot-on;
+ };
+
vusb2_reg: vusb2 {
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <2775000>;
status = "okay";
};
+&usbphy0 {
+ vcc-supply = <&vusb_reg>;
+};
+
&usbotg {
dr_mode = "otg";
disable-over-current;