--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,iproc-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom IPROC SDHCI controller
+
+maintainers:
+ - Ray Jui <ray.jui@broadcom.com>
+ - Scott Branden <scott.branden@broadcom.com>
+ - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+allOf:
+ - $ref: mmc-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2835-sdhci
+ - brcm,bcm2711-emmc2
+ - brcm,sdhci-iproc-cygnus
+ - brcm,sdhci-iproc
+
+ reg:
+ minItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ Handle to core clock for the sdhci controller.
+
+ sdhci,auto-cmd12:
+ type: boolean
+ description: Specifies that controller should use auto CMD12
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/bcm-cygnus.h>
+
+ mmc@18041000 {
+ compatible = "brcm,sdhci-iproc-cygnus";
+ reg = <0x18041000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+ bus-width = <4>;
+ sdhci,auto-cmd12;
+ no-1-8-v;
+ };
+...
+++ /dev/null
-Broadcom IPROC SDHCI controller
-
-This file documents differences between the core properties described
-by mmc.txt and the properties that represent the IPROC SDHCI controller.
-
-Required properties:
-- compatible : Should be one of the following
- "brcm,bcm2835-sdhci"
- "brcm,bcm2711-emmc2"
- "brcm,sdhci-iproc-cygnus"
- "brcm,sdhci-iproc"
-
-Use brcm2835-sdhci for the eMMC controller on the BCM2835 (Raspberry Pi) and
-bcm2711-emmc2 for the additional eMMC2 controller on BCM2711.
-
-Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers
-restricted to 32bit host accesses to SDHCI registers.
-
-Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard
-8, 16, 32-bit host access to SDHCI register.
-
-- clocks : The clock feeding the SDHCI controller.
-
-Optional properties:
- - sdhci,auto-cmd12: specifies that controller should use auto CMD12.
-
-Example:
-
-sdhci0: sdhci@18041000 {
- compatible = "brcm,sdhci-iproc-cygnus";
- reg = <0x18041000 0x100>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&lcpll0_clks BCM_CYGNUS_LCPLL0_SDIO_CLK>;
- bus-width = <4>;
- sdhci,auto-cmd12;
- no-1-8-v;
-};