* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#77 $
- *
- * $FreeBSD$
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#89 $
*/
#ifdef __linux__
"Adaptec 29320ALP Ultra320 SCSI adapter",
ahd_aic7901_setup
},
+ /* aic7901A based controllers */
+ {
+ ID_AHA_29320LP,
+ ID_ALL_MASK,
+ "Adaptec 29320LP Ultra320 SCSI adapter",
+ ahd_aic7901A_setup
+ },
/* aic7902 based controllers */
{
ID_AHA_29320,
"Adaptec 29320B Ultra320 SCSI adapter",
ahd_aic7902_setup
},
- {
- ID_AHA_29320LP,
- ID_ALL_MASK,
- "Adaptec 29320LP Ultra320 SCSI adapter",
- ahd_aic7901A_setup
- },
{
ID_AHA_39320,
ID_ALL_MASK,
"Adaptec 39320 Ultra320 SCSI adapter",
ahd_aic7902_setup
},
+ {
+ ID_AHA_39320_B_DELL,
+ ID_ALL_MASK,
+ "Adaptec (Dell OEM) 39320 Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
{
ID_AHA_39320A,
ID_ALL_MASK,
* Now set the termination based on what we found.
*/
sxfrctl1 = ahd_inb(ahd, SXFRCTL1) & ~STPWEN;
+ ahd->flags &= ~AHD_TERM_ENB_A;
if ((termctl & FLX_TERMCTL_ENPRILOW) != 0) {
ahd->flags |= AHD_TERM_ENB_A;
sxfrctl1 |= STPWEN;
#define ID_AHA_29320ALP 0x8017900500449005ull
#define ID_AIC7901A 0x801E9005FFFF9005ull
-#define ID_AHA_29320 0x8012900500429005ull
-#define ID_AHA_29320B 0x8013900500439005ull
#define ID_AHA_29320LP 0x8014900500449005ull
#define ID_AIC7902 0x801F9005FFFF9005ull
#define ID_AIC7902_B 0x801D9005FFFF9005ull
#define ID_AHA_39320 0x8010900500409005ull
+#define ID_AHA_29320 0x8012900500429005ull
+#define ID_AHA_29320B 0x8013900500439005ull
#define ID_AHA_39320_B 0x8015900500409005ull
+#define ID_AHA_39320_B_DELL 0x8015900501681028ull
#define ID_AHA_39320A 0x8016900500409005ull
#define ID_AHA_39320D 0x8011900500419005ull
#define ID_AHA_39320D_B 0x801C900500419005ull
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#69 $
- *
- * $FreeBSD$
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_pci.c#79 $
*/
#ifdef __linux__
"Adaptec aic7892 Ultra160 SCSI adapter (ARO)",
ahc_aic7892_setup
},
+ {
+ ID_AHA_2915_30LP,
+ ID_ALL_MASK,
+ "Adaptec 2915/30LP Ultra160 SCSI adapter",
+ ahc_aic7892_setup
+ },
/* aic7895 based controllers */
{
ID_AHA_2940U_DUAL,
* use for this test.
*/
hcntrl = ahc_inb(ahc, HCNTRL);
+
if (hcntrl == 0xFF)
goto fail;
+ if ((hcntrl & CHIPRST) != 0) {
+ /*
+ * The chip has not been initialized since
+ * PCI/EISA/VLB bus reset. Don't trust
+ * "left over BIOS data".
+ */
+ ahc->flags |= AHC_NO_BIOS_INIT;
+ }
+
/*
* Next create a situation where write combining
* or read prefetching could be initiated by the
sd.sd_chip = C56_66;
}
ahc_release_seeprom(&sd);
+
+ /* Remember the SEEPROM type for later */
+ if (sd.sd_chip == C56_66)
+ ahc->flags |= AHC_LARGE_SEEPROM;
}
if (!have_seeprom) {
#define ID_AHA_29160C 0x0080900562209005ull
#define ID_AHA_29160B 0x00809005E2209005ull
#define ID_AHA_19160B 0x0081900562A19005ull
+#define ID_AHA_2915_30LP 0x0082900502109005ull
#define ID_AIC7896 0x005F9005FFFF9005ull
#define ID_AIC7896_ARO 0x00539005FFFF9005ull