Bring in changes to ads7846 to avoid mereg conflicts.
--- /dev/null
+* GPIO driven matrix keypad device tree bindings
+
+GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+The matrix keypad supports multiple row and column lines, a key can be
+placed at each intersection of a unique row and a unique column. The matrix
+keypad can sense a key-press and key-release by means of GPIO lines and
+report the event using GPIO interrupts to the cpu.
+
+Required Properties:
+- compatible: Should be "gpio-matrix-keypad"
+- row-gpios: List of gpios used as row lines. The gpio specifier
+ for this property depends on the gpio controller to
+ which these row lines are connected.
+- col-gpios: List of gpios used as column lines. The gpio specifier
+ for this property depends on the gpio controller to
+ which these column lines are connected.
+- linux,keymap: The definition can be found at
+ bindings/input/matrix-keymap.txt
+
+Optional Properties:
+- linux,no-autorepeat: do no enable autorepeat feature.
+- linux,wakeup: use any event on keypad as wakeup event.
+- debounce-delay-ms: debounce interval in milliseconds
+- col-scan-delay-us: delay, measured in microseconds, that is needed
+ before we can scan keypad after activating column gpio
+
+Example:
+ matrix-keypad {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio2 25 0
+ &gpio2 26 0
+ &gpio2 27 0>;
+
+ col-gpios = <&gpio2 21 0
+ &gpio2 22 0>;
+
+ linux,keymap = <0x0000008B
+ 0x0100009E
+ 0x02000069
+ 0x0001006A
+ 0x0101001C
+ 0x0201006C>;
+ };
--- /dev/null
+* PWM beeper device tree bindings
+
+Registers a PWM device as beeper.
+
+Required properties:
+- compatible: should be "pwm-beeper"
+- pwms: phandle to the physical PWM device
--- /dev/null
+* MELFAS MMS114 touchscreen controller
+
+Required properties:
+- compatible: must be "melfas,mms114"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Optional properties:
+- contact-threshold:
+- moving-threshold:
+- x-invert: invert X axis
+- y-invert: invert Y axis
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ touchscreen@48 {
+ compatible = "melfas,mms114";
+ reg = <0x48>;
+ interrupts = <39 0>;
+ x-size = <720>;
+ y-size = <1280>;
+ contact-threshold = <10>;
+ moving-threshold = <10>;
+ x-invert;
+ y-invert;
+ };
+
+ /* ... */
+ };
--- /dev/null
+STMPE Touchscreen
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-ts"
+
+Optional properties:
+- st,sample-time: ADC converstion time in number of clock. (0 -> 36 clocks, 1 ->
+ 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
+ -> 144 clocks), recommended is 4.
+- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
+ reference)
+- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
+ samples, 3 -> 8 samples)
+- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
+ 100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
+ is 3
+- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
+ -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
+- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
+ the fractional part) recommended is 7
+- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
+ mA max, 1 -> 50 mA typical 80 mA max)
+
+Node name must be stmpe_touchscreen and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
(not yet published)
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
Description
-----------
F: include/linux/altera_jtaguart.h
AMD FAM15H PROCESSOR POWER MONITORING DRIVER
-M: Andreas Herrmann <andreas.herrmann3@amd.com>
+M: Andreas Herrmann <herrmann.der.user@googlemail.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/fam15h_power
M: Seung-Woo Kim <sw0312.kim@samsung.com>
M: Kyungmin Park <kyungmin.park@samsung.com>
L: dri-devel@lists.freedesktop.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
S: Supported
F: drivers/gpu/drm/exynos
F: include/drm/exynos*
F: drivers/pinctrl/spear/
PKTCDVD DRIVER
-M: Peter Osterlund <petero2@telia.com>
+M: Jiri Kosina <jkosina@suse.cz>
S: Maintained
F: drivers/block/pktcdvd.c
F: include/linux/pktcdvd.h
VERSION = 3
PATCHLEVEL = 7
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Terrified Chipmunk
# *DOCUMENTATION*
omapfb_set_lcd_config(&nokia770_lcd_config);
}
-static void __init ads7846_dev_init(void)
-{
- if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0)
- printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
-}
-
-static int ads7846_get_pendown_state(void)
-{
- return !gpio_get_value(ADS7846_PENDOWN_GPIO);
-}
-
static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
.x_max = 0x0fff,
.y_max = 0x0fff,
.debounce_max = 10,
.debounce_tol = 3,
.debounce_rep = 1,
- .get_pendown_state = ads7846_get_pendown_state,
+ .gpio_pendown = ADS7846_PENDOWN_GPIO,
};
static struct spi_board_info nokia770_spi_board_info[] __initdata = {
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
hwa742_dev_init();
- ads7846_dev_init();
mipid_dev_init();
omap1_usb_init(&nokia770_usb_config);
nokia770_mmc_init();
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <asm/opcodes-virt.h>
#include <xen/interface/xen.h>
-/* HVC 0xEA1 */
-#ifdef CONFIG_THUMB2_KERNEL
-#define xen_hvc .word 0xf7e08ea1
-#else
-#define xen_hvc .word 0xe140ea71
-#endif
+#define XEN_IMM 0xEA1
#define HYPERCALL_SIMPLE(hypercall) \
ENTRY(HYPERVISOR_##hypercall) \
mov r12, #__HYPERVISOR_##hypercall; \
- xen_hvc; \
+ __HVC(XEN_IMM); \
mov pc, lr; \
ENDPROC(HYPERVISOR_##hypercall)
stmdb sp!, {r4} \
ldr r4, [sp, #4] \
mov r12, #__HYPERVISOR_##hypercall; \
- xen_hvc \
+ __HVC(XEN_IMM); \
ldm sp!, {r4} \
mov pc, lr \
ENDPROC(HYPERVISOR_##hypercall)
mov r2, r3
ldr r3, [sp, #8]
ldr r4, [sp, #4]
- xen_hvc
+ __HVC(XEN_IMM)
ldm sp!, {r4}
mov pc, lr
ENDPROC(privcmd_call);
select GENERIC_CPU_DEVICES
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
config ZONE_DMA
bool
INITRD_PHYS = 0x02180000
INITRD_VIRT = 0x02180000
+OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment
+
#
# If you don't define ZRELADDR above,
# then it defaults to ZTEXTADDR
targets: $(obj)/Image
$(obj)/Image: vmlinux FORCE
- $(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@
#$(obj)/Image: $(CONFIGURE) $(SYSTEM)
-# $(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
+# $(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@
bzImage: zImage
zImage: $(CONFIGURE) compressed/$(LINUX)
- $(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@
bootpImage: bootp/bootp
- $(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
+ $(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@
compressed/$(LINUX): $(LINUX) dep
@$(MAKE) -C compressed $(LINUX)
#define __ARCH_WANT_SYS_RT_SIGACTION
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
/*
* "Conditional" syscalls
call schedule_tail
calll.p @(gr21,gr0)
or gr20,gr20,gr8
- bra sys_exit
-
- .globl ret_from_kernel_execve
-ret_from_kernel_execve:
- ori gr28,0,sp
bra __syscall_exit
###################################################################################################
subicc gr5,#0,gr0,icc0
beq icc0,#0,__entry_return_direct
-__entry_preempt_need_resched:
- ldi @(gr15,#TI_FLAGS),gr4
- andicc gr4,#_TIF_NEED_RESCHED,gr0,icc0
- beq icc0,#1,__entry_return_direct
-
- setlos #PREEMPT_ACTIVE,gr5
- sti gr5,@(gr15,#TI_FLAGS)
-
- andi gr23,#~PSR_PIL,gr23
- movgs gr23,psr
-
- call schedule
- sti gr0,@(gr15,#TI_PRE_COUNT)
-
- movsg psr,gr23
- ori gr23,#PSR_PIL_14,gr23
- movgs gr23,psr
- bra __entry_preempt_need_resched
-#else
- bra __entry_return_direct
+ subcc gr0,gr0,gr0,icc2 /* set Z and clear C */
+ call preempt_schedule_irq
#endif
+ bra __entry_return_direct
###############################################################################
childregs = (struct pt_regs *)
(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
+ /* set up the userspace frame (the only place that the USP is stored) */
+ *childregs = *__kernel_frame0_ptr;
+
p->set_child_tid = p->clear_child_tid = NULL;
p->thread.frame = childregs;
p->thread.frame0 = childregs;
if (unlikely(!regs)) {
- memset(childregs, 0, sizeof(struct pt_regs));
childregs->gr9 = usp; /* function */
childregs->gr8 = arg;
- childregs->psr = PSR_S;
p->thread.pc = (unsigned long) ret_from_kernel_thread;
save_user_regs(p->thread.user);
return 0;
#include <linux/types.h>
#include <linux/slab.h>
+#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/pci.h>
#ifndef _ASM_X86_XEN_HYPERVISOR_H
#define _ASM_X86_XEN_HYPERVISOR_H
-/* arch/i386/kernel/setup.c */
extern struct shared_info *HYPERVISOR_shared_info;
extern struct start_info *xen_start_info;
{
struct kvm_mmio_fragment *frag = &vcpu->mmio_fragments[0];
- memcpy(vcpu->run->mmio.data, frag->data, frag->len);
+ memcpy(vcpu->run->mmio.data, frag->data, min(8u, frag->len));
return X86EMUL_CONTINUE;
}
bytes -= handled;
val += handled;
- while (bytes) {
- unsigned now = min(bytes, 8U);
-
- frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++];
- frag->gpa = gpa;
- frag->data = val;
- frag->len = now;
-
- gpa += now;
- val += now;
- bytes -= now;
- }
+ WARN_ON(vcpu->mmio_nr_fragments >= KVM_MAX_MMIO_FRAGMENTS);
+ frag = &vcpu->mmio_fragments[vcpu->mmio_nr_fragments++];
+ frag->gpa = gpa;
+ frag->data = val;
+ frag->len = bytes;
return X86EMUL_CONTINUE;
}
vcpu->mmio_needed = 1;
vcpu->mmio_cur_fragment = 0;
- vcpu->run->mmio.len = vcpu->mmio_fragments[0].len;
+ vcpu->run->mmio.len = min(8u, vcpu->mmio_fragments[0].len);
vcpu->run->mmio.is_write = vcpu->mmio_is_write = ops->write;
vcpu->run->exit_reason = KVM_EXIT_MMIO;
vcpu->run->mmio.phys_addr = gpa;
*
* read:
* for each fragment
- * write gpa, len
- * exit
- * copy data
+ * for each mmio piece in the fragment
+ * write gpa, len
+ * exit
+ * copy data
* execute insn
*
* write:
* for each fragment
- * write gpa, len
- * copy data
- * exit
+ * for each mmio piece in the fragment
+ * write gpa, len
+ * copy data
+ * exit
*/
static int complete_emulated_mmio(struct kvm_vcpu *vcpu)
{
struct kvm_run *run = vcpu->run;
struct kvm_mmio_fragment *frag;
+ unsigned len;
BUG_ON(!vcpu->mmio_needed);
/* Complete previous fragment */
- frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment++];
+ frag = &vcpu->mmio_fragments[vcpu->mmio_cur_fragment];
+ len = min(8u, frag->len);
if (!vcpu->mmio_is_write)
- memcpy(frag->data, run->mmio.data, frag->len);
+ memcpy(frag->data, run->mmio.data, len);
+
+ if (frag->len <= 8) {
+ /* Switch to the next fragment. */
+ frag++;
+ vcpu->mmio_cur_fragment++;
+ } else {
+ /* Go forward to the next mmio piece. */
+ frag->data += len;
+ frag->gpa += len;
+ frag->len -= len;
+ }
+
if (vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments) {
vcpu->mmio_needed = 0;
if (vcpu->mmio_is_write)
vcpu->mmio_read_completed = 1;
return complete_emulated_io(vcpu);
}
- /* Initiate next fragment */
- ++frag;
+
run->exit_reason = KVM_EXIT_MMIO;
run->mmio.phys_addr = frag->gpa;
if (vcpu->mmio_is_write)
- memcpy(run->mmio.data, frag->data, frag->len);
- run->mmio.len = frag->len;
+ memcpy(run->mmio.data, frag->data, min(8u, frag->len));
+ run->mmio.len = min(8u, frag->len);
run->mmio.is_write = vcpu->mmio_is_write;
vcpu->arch.complete_userspace_io = complete_emulated_mmio;
return 0;
return this_cpu_read(xen_vcpu_info.arch.cr2);
}
+void xen_flush_tlb_all(void)
+{
+ struct mmuext_op *op;
+ struct multicall_space mcs;
+
+ trace_xen_mmu_flush_tlb_all(0);
+
+ preempt_disable();
+
+ mcs = xen_mc_entry(sizeof(*op));
+
+ op = mcs.args;
+ op->cmd = MMUEXT_TLB_FLUSH_ALL;
+ MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
+
+ xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+ preempt_enable();
+}
static void xen_flush_tlb(void)
{
struct mmuext_op *op;
err = 0;
out:
- flush_tlb_all();
+ xen_flush_tlb_all();
return err;
}
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
select GENERIC_PCI_IOMAP
+ select GENERIC_KERNEL_THREAD
+ select GENERIC_KERNEL_EXECVE
select ARCH_WANT_OPTIONAL_GPIOLIB
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
static inline void iounmap(volatile void __iomem *addr)
{
}
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
#endif /* CONFIG_MMU */
/*
/* Clearing a0 terminates the backtrace. */
#define start_thread(regs, new_pc, new_sp) \
+ memset(regs, 0, sizeof(*regs)); \
regs->pc = new_pc; \
regs->ps = USER_PS_VALUE; \
regs->areg[1] = new_sp; \
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while(0)
-/* Create a kernel thread without removing it from tasklists */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
/* Copy and release all segment info associated with a VM */
#define copy_segments(p, mm) do { } while(0)
#define release_segments(mm) do { } while(0)
struct pt_regs;
struct sigaction;
-asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*);
+asmlinkage long sys_execve(char*, char**, char**, struct pt_regs*);
asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*);
asmlinkage long xtensa_ptrace(long, long, long, long);
asmlinkage long xtensa_sigreturn(struct pt_regs*);
-/*
- * include/asm-xtensa/unistd.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
+#ifndef _XTENSA_UNISTD_H
+#define _XTENSA_UNISTD_H
+#define __ARCH_WANT_SYS_EXECVE
#include <uapi/asm/unistd.h>
-
/*
* "Conditional" syscalls
*
#define __IGNORE_mmap /* use mmap2 */
#define __IGNORE_vfork /* use clone */
#define __IGNORE_fadvise64 /* use fadvise64_64 */
+
+#endif /* _XTENSA_UNISTD_H */
-/*
- * include/asm-xtensa/unistd.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2012 Tensilica Inc.
- */
-
-#ifndef _UAPI_XTENSA_UNISTD_H
+#if !defined(_UAPI_XTENSA_UNISTD_H) || defined(__SYSCALL)
#define _UAPI_XTENSA_UNISTD_H
#ifndef __SYSCALL
#define __NR_clone 116
__SYSCALL(116, xtensa_clone, 5)
#define __NR_execve 117
-__SYSCALL(117, xtensa_execve, 3)
+__SYSCALL(117, sys_execve, 3)
#define __NR_exit 118
__SYSCALL(118, sys_exit, 1)
#define __NR_exit_group 119
#define SYS_XTENSA_COUNT 5 /* count */
+#undef __SYSCALL
+
#endif /* _UAPI_XTENSA_UNISTD_H */
retw
-/*
- * Create a kernel thread
- *
- * int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
- * a2 a2 a3 a4
- */
-
-ENTRY(kernel_thread)
- entry a1, 16
-
- mov a5, a2 # preserve fn over syscall
- mov a7, a3 # preserve args over syscall
-
- movi a3, _CLONE_VM | _CLONE_UNTRACED
- movi a2, __NR_clone
- or a6, a4, a3 # arg0: flags
- mov a3, a1 # arg1: sp
- syscall
-
- beq a3, a1, 1f # branch if parent
- mov a6, a7 # args
- callx4 a5 # fn(args)
-
- movi a2, __NR_exit
- syscall # return value of fn(args) still in a6
-
-1: retw
-
-/*
- * Do a system call from kernel instead of calling sys_execve, so we end up
- * with proper pt_regs.
- *
- * int kernel_execve(const char *fname, char *const argv[], charg *const envp[])
- * a2 a2 a3 a4
- */
-
-ENTRY(kernel_execve)
- entry a1, 16
- mov a6, a2 # arg0 is in a6
- movi a2, __NR_execve
- syscall
-
- retw
-
/*
* Task switch.
*
j common_exception_return
+/*
+ * Kernel thread creation helper
+ * On entry, set up by copy_thread: a2 = thread_fn, a3 = thread_fn arg
+ * left from _switch_to: a6 = prev
+ */
+ENTRY(ret_from_kernel_thread)
+
+ call4 schedule_tail
+ mov a6, a3
+ callx4 a2
+ j common_exception_return
+
+ENDPROC(ret_from_kernel_thread)
#include <asm/regs.h>
extern void ret_from_fork(void);
+extern void ret_from_kernel_thread(void);
struct task_struct *current_set[NR_CPUS] = {&init_task, };
/*
* Copy thread.
*
+ * There are two modes in which this function is called:
+ * 1) Userspace thread creation,
+ * regs != NULL, usp_thread_fn is userspace stack pointer.
+ * It is expected to copy parent regs (in case CLONE_VM is not set
+ * in the clone_flags) and set up passed usp in the childregs.
+ * 2) Kernel thread creation,
+ * regs == NULL, usp_thread_fn is the function to run in the new thread
+ * and thread_fn_arg is its parameter.
+ * childregs are not used for the kernel threads.
+ *
* The stack layout for the new thread looks like this:
*
- * +------------------------+ <- sp in childregs (= tos)
+ * +------------------------+
* | childregs |
* +------------------------+ <- thread.sp = sp in dummy-frame
* | dummy-frame | (saved in dummy-frame spill-area)
* +------------------------+
*
- * We create a dummy frame to return to ret_from_fork:
- * a0 points to ret_from_fork (simulating a call4)
+ * We create a dummy frame to return to either ret_from_fork or
+ * ret_from_kernel_thread:
+ * a0 points to ret_from_fork/ret_from_kernel_thread (simulating a call4)
* sp points to itself (thread.sp)
- * a2, a3 are unused.
+ * a2, a3 are unused for userspace threads,
+ * a2 points to thread_fn, a3 holds thread_fn arg for kernel threads.
*
* Note: This is a pristine frame, so we don't need any spill region on top of
* childregs.
* involved. Much simpler to just not copy those live frames across.
*/
-int copy_thread(unsigned long clone_flags, unsigned long usp,
- unsigned long unused,
- struct task_struct * p, struct pt_regs * regs)
+int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn,
+ unsigned long thread_fn_arg,
+ struct task_struct *p, struct pt_regs *unused)
{
- struct pt_regs *childregs;
- unsigned long tos;
- int user_mode = user_mode(regs);
+ struct pt_regs *childregs = task_pt_regs(p);
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
struct thread_info *ti;
#endif
- /* Set up new TSS. */
- tos = (unsigned long)task_stack_page(p) + THREAD_SIZE;
- if (user_mode)
- childregs = (struct pt_regs*)(tos - PT_USER_SIZE);
- else
- childregs = (struct pt_regs*)tos - 1;
-
- /* This does not copy all the regs. In a bout of brilliance or madness,
- ARs beyond a0-a15 exist past the end of the struct. */
- *childregs = *regs;
-
/* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */
*((int*)childregs - 3) = (unsigned long)childregs;
*((int*)childregs - 4) = 0;
- childregs->areg[2] = 0;
- p->set_child_tid = p->clear_child_tid = NULL;
- p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1);
p->thread.sp = (unsigned long)childregs;
- if (user_mode(regs)) {
+ if (!(p->flags & PF_KTHREAD)) {
+ struct pt_regs *regs = current_pt_regs();
+ unsigned long usp = usp_thread_fn ?
+ usp_thread_fn : regs->areg[1];
+ p->thread.ra = MAKE_RA_FOR_CALL(
+ (unsigned long)ret_from_fork, 0x1);
+
+ /* This does not copy all the regs.
+ * In a bout of brilliance or madness,
+ * ARs beyond a0-a15 exist past the end of the struct.
+ */
+ *childregs = *regs;
childregs->areg[1] = usp;
+ childregs->areg[2] = 0;
+
+ /* When sharing memory with the parent thread, the child
+ usually starts on a pristine stack, so we have to reset
+ windowbase, windowstart and wmask.
+ (Note that such a new thread is required to always create
+ an initial call4 frame)
+ The exception is vfork, where the new thread continues to
+ run on the parent's stack until it calls execve. This could
+ be a call8 or call12, which requires a legal stack frame
+ of the previous caller for the overflow handlers to work.
+ (Note that it's always legal to overflow live registers).
+ In this case, ensure to spill at least the stack pointer
+ of that frame. */
+
if (clone_flags & CLONE_VM) {
- childregs->wmask = 1; /* can't share live windows */
+ /* check that caller window is live and same stack */
+ int len = childregs->wmask & ~0xf;
+ if (regs->areg[1] == usp && len != 0) {
+ int callinc = (regs->areg[0] >> 30) & 3;
+ int caller_ars = XCHAL_NUM_AREGS - callinc * 4;
+ put_user(regs->areg[caller_ars+1],
+ (unsigned __user*)(usp - 12));
+ }
+ childregs->wmask = 1;
+ childregs->windowstart = 1;
+ childregs->windowbase = 0;
} else {
int len = childregs->wmask & ~0xf;
memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4],
// FIXME: we need to set THREADPTR in thread_info...
if (clone_flags & CLONE_SETTLS)
childregs->areg[2] = childregs->areg[6];
-
} else {
- /* In kernel space, we start a new thread with a new stack. */
- childregs->wmask = 1;
- childregs->areg[1] = tos;
+ p->thread.ra = MAKE_RA_FOR_CALL(
+ (unsigned long)ret_from_kernel_thread, 1);
+
+ /* pass parameters to ret_from_kernel_thread:
+ * a2 = thread_fn, a3 = thread_fn arg
+ */
+ *((int *)childregs - 1) = thread_fn_arg;
+ *((int *)childregs - 2) = usp_thread_fn;
+
+ /* Childregs are only used when we're going to userspace
+ * in which case start_thread will set them up.
+ */
}
#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
void __user *child_tid, long a5,
struct pt_regs *regs)
{
- if (!newsp)
- newsp = regs->areg[1];
return do_fork(clone_flags, newsp, regs, 0, parent_tid, child_tid);
}
-
-/*
- * xtensa_execve() executes a new program.
- */
-
-asmlinkage
-long xtensa_execve(const char __user *name,
- const char __user *const __user *argv,
- const char __user *const __user *envp,
- long a3, long a4, long a5,
- struct pt_regs *regs)
-{
- long error;
- struct filename *filename;
-
- filename = getname(name);
- error = PTR_ERR(filename);
- if (IS_ERR(filename))
- goto out;
- error = do_execve(filename->name, argv, envp, regs);
- putname(filename);
-out:
- return error;
-}
-
syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= {
[0 ... __NR_syscall_count - 1] = (syscall_t)&sys_ni_syscall,
-#undef __SYSCALL
#define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol,
-#undef __KERNEL_SYSCALLS__
-#include <asm/unistd.h>
+#include <uapi/asm/unistd.h>
};
asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg)
return (long)ret;
}
-asmlinkage long xtensa_fadvise64_64(int fd, int advice, unsigned long long offset, unsigned long long len)
+asmlinkage long xtensa_fadvise64_64(int fd, int advice,
+ unsigned long long offset, unsigned long long len)
{
return sys_fadvise64_64(fd, offset, len, advice);
}
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(empty_zero_page);
/*
config BLK_DEV_THROTTLING
bool "Block layer bio throttling support"
- depends on BLK_CGROUP=y && EXPERIMENTAL
+ depends on BLK_CGROUP=y
default n
---help---
Block layer bio throttling support. It can be used to limit
blkg_destroy(blkg);
spin_unlock(&blkcg->lock);
}
+
+ /*
+ * root blkg is destroyed. Just clear the pointer since
+ * root_rl does not take reference on root blkg.
+ */
+ q->root_blkg = NULL;
+ q->root_rl.blkg = NULL;
}
static void blkg_rcu_free(struct rcu_head *rcu_head)
*/
if (rl == &q->root_rl) {
ent = &q->blkg_list;
+ /* There are no more block groups, hence no request lists */
+ if (list_empty(ent))
+ return NULL;
} else {
blkg = container_of(rl, struct blkcg_gq, rl);
ent = &blkg->q_node;
struct request *rqa = container_of(a, struct request, queuelist);
struct request *rqb = container_of(b, struct request, queuelist);
- return !(rqa->q <= rqb->q);
+ return !(rqa->q < rqb->q ||
+ (rqa->q == rqb->q && blk_rq_pos(rqa) < blk_rq_pos(rqb)));
}
/*
acpi_video_bus_get_devices(struct acpi_video_bus *video,
struct acpi_device *device)
{
- int status;
+ int status = 0;
struct acpi_device *dev;
- status = acpi_video_device_enumerate(video);
- if (status)
- return status;
+ /*
+ * There are systems where video module known to work fine regardless
+ * of broken _DOD and ignoring returned value here doesn't cause
+ * any issues later.
+ */
+ acpi_video_device_enumerate(video);
list_for_each_entry(dev, &device->children, node) {
config BLK_CPQ_CISS_DA
tristate "Compaq Smart Array 5xxx support"
depends on PCI
+ select CHECK_SIGNATURE
help
This is the driver for Compaq Smart Array 5xxx controllers.
Everyone using these boards should say Y here.
module will be called DAC960.
config BLK_DEV_UMEM
- tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
+ tristate "Micro Memory MM5415 Battery Backed RAM support"
+ depends on PCI
---help---
Saying Y here will include support for the MM5415 family of
battery backed (Non-volatile) RAM cards.
a disc is opened for writing.
config CDROM_PKTCDVD_WCACHE
- bool "Enable write caching (EXPERIMENTAL)"
- depends on CDROM_PKTCDVD && EXPERIMENTAL
+ bool "Enable write caching"
+ depends on CDROM_PKTCDVD
help
If enabled, write caching will be set for the CD-R/W device. For now
this option is dangerous unless the CD-RW media is known good, as we
config VIRTIO_BLK
- tristate "Virtio block driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && VIRTIO
+ tristate "Virtio block driver"
+ depends on VIRTIO
---help---
This is the virtual block driver for virtio. It can be used with
lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
config BLK_DEV_RBD
tristate "Rados block device (RBD)"
- depends on INET && EXPERIMENTAL && BLOCK
+ depends on INET && BLOCK
select CEPH_LIB
select LIBCRC32C
select CRYPTO_AES
return;
}
/* write all data in the battery backed cache to disk */
- memset(flush_buf, 0, 4);
return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf,
4, 0, CTLR_LUNID, TYPE_CMD);
kfree(flush_buf);
static struct platform_device floppy_device[N_DRIVE];
+static bool floppy_available(int drive)
+{
+ if (!(allowed_drive_mask & (1 << drive)))
+ return false;
+ if (fdc_state[FDC(drive)].version == FDC_NONE)
+ return false;
+ return true;
+}
+
static struct kobject *floppy_find(dev_t dev, int *part, void *data)
{
int drive = (*part & 3) | ((*part & 0x80) >> 5);
- if (drive >= N_DRIVE ||
- !(allowed_drive_mask & (1 << drive)) ||
- fdc_state[FDC(drive)].version == FDC_NONE)
+ if (drive >= N_DRIVE || !floppy_available(drive))
return NULL;
if (((*part >> 2) & 0x1f) >= ARRAY_SIZE(floppy_type))
return NULL;
static int __init do_floppy_init(void)
{
- int i, unit, drive;
- int err, dr;
+ int i, unit, drive, err;
set_debugt();
interruptjiffies = resultjiffies = jiffies;
raw_cmd = NULL;
- for (dr = 0; dr < N_DRIVE; dr++) {
- disks[dr] = alloc_disk(1);
- if (!disks[dr]) {
- err = -ENOMEM;
- goto out_put_disk;
- }
+ floppy_wq = alloc_ordered_workqueue("floppy", 0);
+ if (!floppy_wq)
+ return -ENOMEM;
- floppy_wq = alloc_ordered_workqueue("floppy", 0);
- if (!floppy_wq) {
+ for (drive = 0; drive < N_DRIVE; drive++) {
+ disks[drive] = alloc_disk(1);
+ if (!disks[drive]) {
err = -ENOMEM;
goto out_put_disk;
}
- disks[dr]->queue = blk_init_queue(do_fd_request, &floppy_lock);
- if (!disks[dr]->queue) {
+ disks[drive]->queue = blk_init_queue(do_fd_request, &floppy_lock);
+ if (!disks[drive]->queue) {
err = -ENOMEM;
- goto out_destroy_workq;
+ goto out_put_disk;
}
- blk_queue_max_hw_sectors(disks[dr]->queue, 64);
- disks[dr]->major = FLOPPY_MAJOR;
- disks[dr]->first_minor = TOMINOR(dr);
- disks[dr]->fops = &floppy_fops;
- sprintf(disks[dr]->disk_name, "fd%d", dr);
+ blk_queue_max_hw_sectors(disks[drive]->queue, 64);
+ disks[drive]->major = FLOPPY_MAJOR;
+ disks[drive]->first_minor = TOMINOR(drive);
+ disks[drive]->fops = &floppy_fops;
+ sprintf(disks[drive]->disk_name, "fd%d", drive);
- init_timer(&motor_off_timer[dr]);
- motor_off_timer[dr].data = dr;
- motor_off_timer[dr].function = motor_off_callback;
+ init_timer(&motor_off_timer[drive]);
+ motor_off_timer[drive].data = drive;
+ motor_off_timer[drive].function = motor_off_callback;
}
err = register_blkdev(FLOPPY_MAJOR, "fd");
}
for (drive = 0; drive < N_DRIVE; drive++) {
- if (!(allowed_drive_mask & (1 << drive)))
- continue;
- if (fdc_state[FDC(drive)].version == FDC_NONE)
+ if (!floppy_available(drive))
continue;
floppy_device[drive].name = floppy_device_name;
err = platform_device_register(&floppy_device[drive]);
if (err)
- goto out_release_dma;
+ goto out_remove_drives;
err = device_create_file(&floppy_device[drive].dev,
&dev_attr_cmos);
out_unreg_platform_dev:
platform_device_unregister(&floppy_device[drive]);
+out_remove_drives:
+ while (drive--) {
+ if (floppy_available(drive)) {
+ del_gendisk(disks[drive]);
+ device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
+ platform_device_unregister(&floppy_device[drive]);
+ }
+ }
out_release_dma:
if (atomic_read(&usage_count))
floppy_release_irq_and_dma();
out_unreg_region:
blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
platform_driver_unregister(&floppy_driver);
-out_destroy_workq:
- destroy_workqueue(floppy_wq);
out_unreg_blkdev:
unregister_blkdev(FLOPPY_MAJOR, "fd");
out_put_disk:
- while (dr--) {
- del_timer_sync(&motor_off_timer[dr]);
- if (disks[dr]->queue) {
- blk_cleanup_queue(disks[dr]->queue);
- /*
- * put_disk() is not paired with add_disk() and
- * will put queue reference one extra time. fix it.
- */
- disks[dr]->queue = NULL;
+ for (drive = 0; drive < N_DRIVE; drive++) {
+ if (!disks[drive])
+ break;
+ if (disks[drive]->queue) {
+ del_timer_sync(&motor_off_timer[drive]);
+ blk_cleanup_queue(disks[drive]->queue);
+ disks[drive]->queue = NULL;
}
- put_disk(disks[dr]);
+ put_disk(disks[drive]);
}
+ destroy_workqueue(floppy_wq);
return err;
}
for (drive = 0; drive < N_DRIVE; drive++) {
del_timer_sync(&motor_off_timer[drive]);
- if ((allowed_drive_mask & (1 << drive)) &&
- fdc_state[FDC(drive)].version != FDC_NONE) {
+ if (floppy_available(drive)) {
del_gendisk(disks[drive]);
device_remove_file(&floppy_device[drive].dev, &dev_attr_cmos);
platform_device_unregister(&floppy_device[drive]);
if (lo->lo_state != Lo_bound)
return -ENXIO;
- if (lo->lo_refcnt > 1) /* we needed one fd for the ioctl */
- return -EBUSY;
+ /*
+ * If we've explicitly asked to tear down the loop device,
+ * and it has an elevated reference count, set it for auto-teardown when
+ * the last reference goes away. This stops $!~#$@ udev from
+ * preventing teardown because it decided that it needs to run blkid on
+ * the loopback device whenever they appear. xfstests is notorious for
+ * failing tests because blkid via udev races with a losetup
+ * <dev>/do something like mkfs/losetup -d <dev> causing the losetup -d
+ * command to fail with EBUSY.
+ */
+ if (lo->lo_refcnt > 1) {
+ lo->lo_flags |= LO_FLAGS_AUTOCLEAR;
+ mutex_unlock(&lo->lo_ctl_mutex);
+ return 0;
+ }
if (filp == NULL)
return -EINVAL;
}
return rv;
}
-
-static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout)
+static void mtip_set_timeout(struct driver_data *dd,
+ struct host_to_dev_fis *fis,
+ unsigned int *timeout, u8 erasemode)
{
switch (fis->command) {
case ATA_CMD_DOWNLOAD_MICRO:
break;
case ATA_CMD_SEC_ERASE_UNIT:
case 0xFC:
- *timeout = 240000; /* 4 minutes */
+ if (erasemode)
+ *timeout = ((*(dd->port->identify + 90) * 2) * 60000);
+ else
+ *timeout = ((*(dd->port->identify + 89) * 2) * 60000);
break;
case ATA_CMD_STANDBYNOW1:
*timeout = 120000; /* 2 minutes */
unsigned int transfer_size;
unsigned long task_file_data;
int intotal = outtotal + req_task->out_size;
+ int erasemode = 0;
taskout = req_task->out_size;
taskin = req_task->in_size;
fis.lba_hi,
fis.device);
- mtip_set_timeout(&fis, &timeout);
+ /* check for erase mode support during secure erase.*/
+ if ((fis.command == ATA_CMD_SEC_ERASE_UNIT)
+ && (outbuf[0] & MTIP_SEC_ERASE_MODE)) {
+ erasemode = 1;
+ }
+
+ mtip_set_timeout(dd, &fis, &timeout, erasemode);
/* Determine the correct transfer size.*/
if (force_single_sector)
/* offset of Device Control register in PCIe extended capabilites space */
#define PCIE_CONFIG_EXT_DEVICE_CONTROL_OFFSET 0x48
+/* check for erase mode support during secure erase */
+#define MTIP_SEC_ERASE_MODE 0x3
+
/* # of times to retry timed out/failed IOs */
#define MTIP_MAX_RETRIES 2
struct block_device *bdev;
/* Cached size parameter. */
sector_t size;
- bool flush_support;
- bool discard_secure;
+ unsigned int flush_support:1;
+ unsigned int discard_secure:1;
};
struct backend_info;
{
struct xen_blkif *blkif;
- blkif = kmem_cache_alloc(xen_blkif_cachep, GFP_KERNEL);
+ blkif = kmem_cache_zalloc(xen_blkif_cachep, GFP_KERNEL);
if (!blkif)
return ERR_PTR(-ENOMEM);
- memset(blkif, 0, sizeof(*blkif));
blkif->domid = domid;
spin_lock_init(&blkif->blk_ring_lock);
atomic_set(&blkif->refcnt, 1);
}
}
-void xen_blkif_free(struct xen_blkif *blkif)
+static void xen_blkif_free(struct xen_blkif *blkif)
{
if (!atomic_dec_and_test(&blkif->refcnt))
BUG();
VBD_SHOW(physical_device, "%x:%x\n", be->major, be->minor);
VBD_SHOW(mode, "%s\n", be->mode);
-int xenvbd_sysfs_addif(struct xenbus_device *dev)
+static int xenvbd_sysfs_addif(struct xenbus_device *dev)
{
int error;
return error;
}
-void xenvbd_sysfs_delif(struct xenbus_device *dev)
+static void xenvbd_sysfs_delif(struct xenbus_device *dev)
{
sysfs_remove_group(&dev->dev.kobj, &xen_vbdstat_group);
device_remove_file(&dev->dev, &dev_attr_mode);
* http://www.gnu.org/licenses/gpl.html
*
* Maintainer:
- * Andreas Herrmann <andreas.herrmann3@amd.com>
+ * Andreas Herrmann <herrmann.der.user@googlemail.com>
*
* Based on the powernow-k7.c module written by Dave Jones.
* (C) 2003 Dave Jones on behalf of SuSE Labs
}
chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
- chip->buffer = devm_kzalloc(&spi->dev, chip->gpio_chip.ngpio, GFP_KERNEL);
+ chip->buffer = devm_kzalloc(&spi->dev, chip->registers, GFP_KERNEL);
if (!chip->buffer) {
ret = -ENOMEM;
goto exit_destroy;
if (ret)
return ret;
+ mvebu_gpio_set(chip, pin, value);
+
spin_lock_irqsave(&mvchip->lock, flags);
u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip));
u &= ~(1 << pin);
ct->handler = handle_edge_irq;
ct->chip.name = mvchip->chip.label;
- irq_setup_generic_chip(gc, IRQ_MSK(ngpios), IRQ_GC_INIT_MASK_CACHE,
+ irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0,
IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
/* Setup irq domain on top of the generic chip. */
}
}
+/**
+ * _clear_gpio_debounce - clear debounce settings for a gpio
+ * @bank: the gpio bank we're acting upon
+ * @gpio: the gpio number on this @gpio
+ *
+ * If a gpio is using debounce, then clear the debounce enable bit and if
+ * this is the only gpio in this bank using debounce, then clear the debounce
+ * time too. The debounce clock will also be disabled when calling this function
+ * if this is the only gpio in the bank using debounce.
+ */
+static void _clear_gpio_debounce(struct gpio_bank *bank, unsigned gpio)
+{
+ u32 gpio_bit = GPIO_BIT(bank, gpio);
+
+ if (!bank->dbck_flag)
+ return;
+
+ if (!(bank->dbck_enable_mask & gpio_bit))
+ return;
+
+ bank->dbck_enable_mask &= ~gpio_bit;
+ bank->context.debounce_en &= ~gpio_bit;
+ __raw_writel(bank->context.debounce_en,
+ bank->base + bank->regs->debounce_en);
+
+ if (!bank->dbck_enable_mask) {
+ bank->context.debounce = 0;
+ __raw_writel(bank->context.debounce, bank->base +
+ bank->regs->debounce);
+ clk_disable(bank->dbck);
+ bank->dbck_enabled = false;
+ }
+}
+
static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
unsigned trigger)
{
_set_gpio_irqenable(bank, gpio, 0);
_clear_gpio_irqstatus(bank, gpio);
_set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
+ _clear_gpio_debounce(bank, gpio);
}
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
unsigned long flags;
spin_lock_irqsave(&tgpio->lock, flags);
- tgpio->last_ier &= ~(1 << offset);
+ tgpio->last_ier &= ~(1UL << offset);
iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
spin_unlock_irqrestore(&tgpio->lock, flags);
}
unsigned long flags;
spin_lock_irqsave(&tgpio->lock, flags);
- tgpio->last_ier |= 1 << offset;
+ tgpio->last_ier |= 1UL << offset;
iowrite32(tgpio->last_ier, tgpio->membase + TGPIO_IER);
spin_unlock_irqrestore(&tgpio->lock, flags);
}
*/
status = gpio_request(gpio, "sysfs");
- if (status < 0)
+ if (status < 0) {
+ if (status == -EPROBE_DEFER)
+ status = -ENODEV;
goto done;
-
+ }
status = gpio_export(gpio, true);
if (status < 0)
gpio_free(gpio);
spin_lock_irqsave(&gpio_lock, flags);
- if (!gpio_is_valid(gpio))
+ if (!gpio_is_valid(gpio)) {
+ status = -EINVAL;
goto done;
+ }
desc = &gpio_desc[gpio];
chip = desc->chip;
if (chip == NULL)
config DRM_EXYNOS
tristate "DRM Support for Samsung SoC EXYNOS Series"
- depends on DRM && PLAT_SAMSUNG
+ depends on DRM && (PLAT_SAMSUNG || ARCH_MULTIPLATFORM)
select DRM_KMS_HELPER
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
exynos_connector->encoder_id = encoder->base.id;
exynos_connector->manager = manager;
exynos_connector->dpms = DRM_MODE_DPMS_OFF;
+ connector->dpms = DRM_MODE_DPMS_OFF;
connector->encoder = encoder;
err = drm_mode_connector_attach_encoder(connector, encoder);
* @manager: specific encoder has its own manager to control a hardware
* appropriately and we can access a hardware drawing on this manager.
* @dpms: store the encoder dpms value.
+ * @updated: indicate whether overlay data updating is needed or not.
*/
struct exynos_drm_encoder {
struct drm_crtc *old_crtc;
struct drm_encoder drm_encoder;
struct exynos_drm_manager *manager;
- int dpms;
+ int dpms;
+ bool updated;
};
static void exynos_drm_connector_power(struct drm_encoder *encoder, int mode)
switch (mode) {
case DRM_MODE_DPMS_ON:
if (manager_ops && manager_ops->apply)
- manager_ops->apply(manager->dev);
+ if (!exynos_encoder->updated)
+ manager_ops->apply(manager->dev);
+
exynos_drm_connector_power(encoder, mode);
exynos_encoder->dpms = mode;
break;
case DRM_MODE_DPMS_OFF:
exynos_drm_connector_power(encoder, mode);
exynos_encoder->dpms = mode;
+ exynos_encoder->updated = false;
break;
default:
DRM_ERROR("unspecified mode %d\n", mode);
static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
{
- struct exynos_drm_manager *manager = exynos_drm_get_manager(encoder);
+ struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+ struct exynos_drm_manager *manager = exynos_encoder->manager;
struct exynos_drm_manager_ops *manager_ops = manager->ops;
DRM_DEBUG_KMS("%s\n", __FILE__);
if (manager_ops && manager_ops->commit)
manager_ops->commit(manager->dev);
+
+ /*
+ * this will avoid one issue that overlay data is updated to
+ * real hardware two times.
+ * And this variable will be used to check if the data was
+ * already updated or not by exynos_drm_encoder_dpms function.
+ */
+ exynos_encoder->updated = true;
}
static void exynos_drm_encoder_disable(struct drm_encoder *encoder)
if (manager_ops && manager_ops->dpms)
manager_ops->dpms(manager->dev, mode);
- /*
- * set current mode to new one so that data aren't updated into
- * registers by drm_helper_connector_dpms two times.
- *
- * in case that drm_crtc_helper_set_mode() is called,
- * overlay_ops->commit() and manager_ops->commit() callbacks
- * can be called two times, first at drm_crtc_helper_set_mode()
- * and second at drm_helper_connector_dpms().
- * so with this setting, when drm_helper_connector_dpms() is called
- * encoder->funcs->dpms() will be ignored.
- */
- exynos_encoder->dpms = mode;
-
/*
* if this condition is ok then it means that the crtc is already
* detached from encoder and last function for detaching is properly
const struct of_device_id *match;
match = of_match_node(of_match_ptr(mixer_match_types),
pdev->dev.of_node);
- drv = match->data;
+ drv = (struct mixer_drv_data *)match->data;
} else {
drv = (struct mixer_drv_data *)
platform_get_device_id(pdev)->driver_data;
goto put_gmch;
}
- i915_kick_out_firmware_fb(dev_priv);
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ i915_kick_out_firmware_fb(dev_priv);
pci_set_master(dev->pdev);
crt->base.type = INTEL_OUTPUT_ANALOG;
crt->base.cloneable = true;
- if (IS_HASWELL(dev))
+ if (IS_HASWELL(dev) || IS_I830(dev))
crt->base.crtc_mask = (1 << 0);
else
crt->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
intel_ring_emit(ring, flip_addr);
intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
/* turn overlay off */
- intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
- intel_ring_emit(ring, flip_addr);
- intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+ if (IS_I830(dev)) {
+ /* Workaround: Don't disable the overlay fully, since otherwise
+ * it dies on the next OVERLAY_ON cmd. */
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_emit(ring, MI_NOOP);
+ intel_ring_emit(ring, MI_NOOP);
+ } else {
+ intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_OFF);
+ intel_ring_emit(ring, flip_addr);
+ intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP);
+ }
intel_ring_advance(ring);
return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail);
props.type = BACKLIGHT_RAW;
props.max_brightness = _intel_panel_get_max_backlight(dev);
if (props.max_brightness == 0) {
- DRM_ERROR("Failed to get maximum backlight value\n");
+ DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n");
return -ENODEV;
}
dev_priv->backlight =
}
#endif
+static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo,
+ unsigned if_index, uint8_t tx_rate,
+ uint8_t *data, unsigned length)
+{
+ uint8_t set_buf_index[2] = { if_index, 0 };
+ uint8_t hbuf_size, tmp[8];
+ int i;
+
+ if (!intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_INDEX,
+ set_buf_index, 2))
+ return false;
+
+ if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO,
+ &hbuf_size, 1))
+ return false;
+
+ /* Buffer size is 0 based, hooray! */
+ hbuf_size++;
+
+ DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n",
+ if_index, length, hbuf_size);
+
+ for (i = 0; i < hbuf_size; i += 8) {
+ memset(tmp, 0, 8);
+ if (i < length)
+ memcpy(tmp, data + i, min_t(unsigned, 8, length - i));
+
+ if (!intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_DATA,
+ tmp, 8))
+ return false;
+ }
+
+ return intel_sdvo_set_value(intel_sdvo,
+ SDVO_CMD_SET_HBUF_TXRATE,
+ &tx_rate, 1);
+}
+
static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo)
{
struct dip_infoframe avi_if = {
.ver = DIP_VERSION_AVI,
.len = DIP_LEN_AVI,
};
- uint8_t tx_rate = SDVO_HBUF_TX_VSYNC;
- uint8_t set_buf_index[2] = { 1, 0 };
uint8_t sdvo_data[4 + sizeof(avi_if.body.avi)];
- uint64_t *data = (uint64_t *)sdvo_data;
- unsigned i;
intel_dip_infoframe_csum(&avi_if);
sdvo_data[3] = avi_if.checksum;
memcpy(&sdvo_data[4], &avi_if.body, sizeof(avi_if.body.avi));
- if (!intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_INDEX,
- set_buf_index, 2))
- return false;
-
- for (i = 0; i < sizeof(sdvo_data); i += 8) {
- if (!intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_DATA,
- data, 8))
- return false;
- data++;
- }
-
- return intel_sdvo_set_value(intel_sdvo,
- SDVO_CMD_SET_HBUF_TXRATE,
- &tx_rate, 1);
+ return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF,
+ SDVO_HBUF_TX_VSYNC,
+ sdvo_data, sizeof(sdvo_data));
}
static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo)
#define SDVO_CMD_SET_AUDIO_STAT 0x91
#define SDVO_CMD_GET_AUDIO_STAT 0x92
#define SDVO_CMD_SET_HBUF_INDEX 0x93
+ #define SDVO_HBUF_INDEX_ELD 0
+ #define SDVO_HBUF_INDEX_AVI_IF 1
#define SDVO_CMD_GET_HBUF_INDEX 0x94
#define SDVO_CMD_GET_HBUF_INFO 0x95
#define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96
node = kzalloc(sizeof(*node), GFP_KERNEL);
if (!node)
return -ENOMEM;
- node->offset = roundup(offset, mm->block_size);
- node->length = rounddown(offset + length, mm->block_size) - node->offset;
+
+ if (length) {
+ node->offset = roundup(offset, mm->block_size);
+ node->length = rounddown(offset + length, mm->block_size);
+ node->length -= node->offset;
+ }
list_add_tail(&node->nl_entry, &mm->nodes);
list_add_tail(&node->fl_entry, &mm->free);
mm->heap_nodes++;
- mm->heap_size += length;
return 0;
}
u32 block_size;
int heap_nodes;
- u32 heap_size;
};
int nouveau_mm_init(struct nouveau_mm *, u32 offset, u32 length, u32 block);
((priv->base.ram.size & 0x000000ff) << 32);
tags = nv_rd32(priv, 0x100320);
- if (tags) {
- ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1);
- if (ret)
- return ret;
+ ret = nouveau_mm_init(&priv->base.tags, 0, tags, 1);
+ if (ret)
+ return ret;
- nv_debug(priv, "%d compression tags\n", tags);
- }
+ nv_debug(priv, "%d compression tags\n", tags);
size = (priv->base.ram.size >> 12) - rsvd_head - rsvd_tail;
switch (device->chipset) {
case DCB_I2C_NVIO_BIT:
port->drive = info.drive & 0x0f;
if (device->card_type < NV_D0) {
- if (info.drive >= ARRAY_SIZE(nv50_i2c_port))
+ if (port->drive >= ARRAY_SIZE(nv50_i2c_port))
break;
port->drive = nv50_i2c_port[port->drive];
port->sense = port->drive;
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_disp *pdisp = nouveau_disp(drm->device);
struct nouveau_display *disp;
+ u32 pclass = dev->pdev->class >> 8;
int ret, gen;
disp = drm->display = kzalloc(sizeof(*disp), GFP_KERNEL);
drm_kms_helper_poll_init(dev);
drm_kms_helper_poll_disable(dev);
- if (nv_device(drm->device)->card_type < NV_50)
- ret = nv04_display_create(dev);
- else
- if (nv_device(drm->device)->card_type < NV_D0)
- ret = nv50_display_create(dev);
- else
- ret = nvd0_display_create(dev);
- if (ret)
- goto disp_create_err;
-
- if (dev->mode_config.num_crtc) {
- ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (nouveau_modeset == 1 ||
+ (nouveau_modeset < 0 && pclass == PCI_CLASS_DISPLAY_VGA)) {
+ if (nv_device(drm->device)->card_type < NV_50)
+ ret = nv04_display_create(dev);
+ else
+ if (nv_device(drm->device)->card_type < NV_D0)
+ ret = nv50_display_create(dev);
+ else
+ ret = nvd0_display_create(dev);
if (ret)
- goto vblank_err;
+ goto disp_create_err;
+
+ if (dev->mode_config.num_crtc) {
+ ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+ if (ret)
+ goto vblank_err;
+ }
+
+ nouveau_backlight_init(dev);
}
- nouveau_backlight_init(dev);
return 0;
vblank_err:
nouveau_backlight_exit(dev);
drm_vblank_cleanup(dev);
- disp->dtor(dev);
+ if (disp->dtor)
+ disp->dtor(dev);
drm_kms_helper_poll_fini(dev);
drm_mode_config_cleanup(dev);
static int nouveau_noaccel = 0;
module_param_named(noaccel, nouveau_noaccel, int, 0400);
-MODULE_PARM_DESC(modeset, "enable driver");
-static int nouveau_modeset = -1;
+MODULE_PARM_DESC(modeset, "enable driver (default: auto, "
+ "0 = disabled, 1 = enabled, 2 = headless)");
+int nouveau_modeset = -1;
module_param_named(modeset, nouveau_modeset, int, 0400);
static struct drm_driver driver;
nouveau_pm_fini(dev);
- nouveau_display_fini(dev);
+ if (dev->mode_config.num_crtc)
+ nouveau_display_fini(dev);
nouveau_display_destroy(dev);
nouveau_irq_fini(dev);
pm_state.event == PM_EVENT_PRETHAW)
return 0;
- NV_INFO(drm, "suspending fbcon...\n");
- nouveau_fbcon_set_suspend(dev, 1);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "suspending fbcon...\n");
+ nouveau_fbcon_set_suspend(dev, 1);
- NV_INFO(drm, "suspending display...\n");
- ret = nouveau_display_suspend(dev);
- if (ret)
- return ret;
+ NV_INFO(drm, "suspending display...\n");
+ ret = nouveau_display_suspend(dev);
+ if (ret)
+ return ret;
+ }
NV_INFO(drm, "evicting buffers...\n");
ttm_bo_evict_mm(&drm->ttm.bdev, TTM_PL_VRAM);
nouveau_client_init(&cli->base);
}
- NV_INFO(drm, "resuming display...\n");
- nouveau_display_resume(dev);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "resuming display...\n");
+ nouveau_display_resume(dev);
+ }
return ret;
}
nouveau_irq_postinstall(dev);
nouveau_pm_resume(dev);
- NV_INFO(drm, "resuming display...\n");
- nouveau_display_resume(dev);
+ if (dev->mode_config.num_crtc) {
+ NV_INFO(drm, "resuming display...\n");
+ nouveau_display_resume(dev);
+ }
return 0;
}
#ifdef CONFIG_VGA_CONSOLE
if (vgacon_text_force())
nouveau_modeset = 0;
- else
#endif
- nouveau_modeset = 1;
}
if (!nouveau_modeset)
nv_info((cli), fmt, ##args); \
} while (0)
+extern int nouveau_modeset;
+
#endif
nv_subdev(pmc)->intr(nv_subdev(pmc));
- if (device->card_type >= NV_D0) {
- if (nv_rd32(device, 0x000100) & 0x04000000)
- nvd0_display_intr(dev);
- } else
- if (device->card_type >= NV_50) {
- if (nv_rd32(device, 0x000100) & 0x04000000)
- nv50_display_intr(dev);
+ if (dev->mode_config.num_crtc) {
+ if (device->card_type >= NV_D0) {
+ if (nv_rd32(device, 0x000100) & 0x04000000)
+ nvd0_display_intr(dev);
+ } else
+ if (device->card_type >= NV_50) {
+ if (nv_rd32(device, 0x000100) & 0x04000000)
+ nv50_display_intr(dev);
+ }
}
return IRQ_HANDLED;
NVWriteVgaCrtc(dev, 0, NV_CIO_CR_MODE_INDEX, saved_cr_mode);
if (blue == 0x18) {
- NV_INFO(drm, "Load detected on head A\n");
+ NV_DEBUG(drm, "Load detected on head A\n");
return connector_status_connected;
}
if (nv17_dac_sample_load(encoder) &
NV_PRAMDAC_TEST_CONTROL_SENSEB_ALLHI) {
- NV_INFO(drm, "Load detected on output %c\n",
- '@' + ffs(dcb->or));
+ NV_DEBUG(drm, "Load detected on output %c\n",
+ '@' + ffs(dcb->or));
return connector_status_connected;
} else {
return connector_status_disconnected;
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
- nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
+ nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
void nv04_dac_update_dacclk(struct drm_encoder *encoder, bool enable)
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on vga encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on vga encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
nv04_dac_update_dacclk(encoder, mode == DRM_MODE_DPMS_ON);
}
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
- nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
+ nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode)
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on lvds encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
if (was_powersaving && is_powersaving_dpms(mode))
return;
return;
nv_encoder->last_dpms = mode;
- NV_INFO(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on tmds encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
nv04_dfp_update_backlight(encoder, mode);
nv04_dfp_update_fp_control(encoder, mode);
struct nv04_mode_state *state = &nv04_display(dev)->mode_reg;
uint8_t crtc1A;
- NV_INFO(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
- mode, nv_encoder->dcb->index);
+ NV_DEBUG(drm, "Setting dpms mode %d on TV encoder (output %d)\n",
+ mode, nv_encoder->dcb->index);
state->pllsel &= ~(PLLSEL_TV_CRTC1_MASK | PLLSEL_TV_CRTC2_MASK);
helper->dpms(encoder, DRM_MODE_DPMS_ON);
- NV_INFO(drm, "Output %s is running on CRTC %d using output %c\n",
- drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index,
- '@' + ffs(nv_encoder->dcb->or));
+ NV_DEBUG(drm, "Output %s is running on CRTC %d using output %c\n",
+ drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base), nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
}
static void nv04_tv_destroy(struct drm_encoder *encoder)
/* macro tile width & height */
palign = (8 * surf->bankw * track->npipes) * surf->mtilea;
halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea;
- mtileb = (palign / 8) * (halign / 8) * tileb;;
+ mtileb = (palign / 8) * (halign / 8) * tileb;
mtile_pr = surf->nbx / palign;
mtile_ps = (mtile_pr * surf->nby) / halign;
surf->layer_size = mtile_ps * mtileb * slice_pt;
}
/**
- * radeon_atpx_switchto - switch to the requested GPU
+ * radeon_atpx_power_state - power down/up the requested GPU
*
- * @id: GPU to switch to
+ * @id: GPU to power down/up
* @state: requested power state (0 = off, 1 = on)
*
* Execute the necessary ATPX function to power down/up the discrete GPU
struct drm_mode_object *obj;
int i;
enum drm_connector_status ret = connector_status_disconnected;
- bool dret = false;
+ bool dret = false, broken_edid = false;
if (!force && radeon_check_hpd_status_unchanged(connector))
return connector->status;
ret = connector_status_disconnected;
DRM_ERROR("%s: detected RS690 floating bus bug, stopping ddc detect\n", drm_get_connector_name(connector));
radeon_connector->ddc_bus = NULL;
+ } else {
+ ret = connector_status_connected;
+ broken_edid = true; /* defer use_digital to later */
}
} else {
radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
encoder_funcs = encoder->helper_private;
if (encoder_funcs->detect) {
- if (ret != connector_status_connected) {
- ret = encoder_funcs->detect(encoder, connector);
- if (ret == connector_status_connected) {
- radeon_connector->use_digital = false;
+ if (!broken_edid) {
+ if (ret != connector_status_connected) {
+ /* deal with analog monitors without DDC */
+ ret = encoder_funcs->detect(encoder, connector);
+ if (ret == connector_status_connected) {
+ radeon_connector->use_digital = false;
+ }
+ if (ret != connector_status_disconnected)
+ radeon_connector->detected_by_load = true;
}
- if (ret != connector_status_disconnected)
- radeon_connector->detected_by_load = true;
+ } else {
+ enum drm_connector_status lret;
+ /* assume digital unless load detected otherwise */
+ radeon_connector->use_digital = true;
+ lret = encoder_funcs->detect(encoder, connector);
+ DRM_DEBUG_KMS("load_detect %x returned: %x\n",encoder->encoder_type,lret);
+ if (lret == connector_status_connected)
+ radeon_connector->use_digital = false;
}
break;
}
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
+ uint32_t crtc_ext_cntl = 0;
uint32_t mask;
if (radeon_crtc->crtc_id)
RADEON_CRTC_VSYNC_DIS |
RADEON_CRTC_HSYNC_DIS);
+ /*
+ * On all dual CRTC GPUs this bit controls the CRTC of the primary DAC.
+ * Therefore it is set in the DAC DMPS function.
+ * This is different for GPU's with a single CRTC but a primary and a
+ * TV DAC: here it controls the single CRTC no matter where it is
+ * routed. Therefore we set it here.
+ */
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ crtc_ext_cntl = RADEON_CRTC_CRT_ON;
+
switch (mode) {
case DRM_MODE_DPMS_ON:
radeon_crtc->enabled = true;
else {
WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_EN, ~(RADEON_CRTC_EN |
RADEON_CRTC_DISP_REQ_EN_B));
- WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask);
+ WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl));
}
drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
radeon_crtc_load_lut(crtc);
else {
WREG32_P(RADEON_CRTC_GEN_CNTL, RADEON_CRTC_DISP_REQ_EN_B, ~(RADEON_CRTC_EN |
RADEON_CRTC_DISP_REQ_EN_B));
- WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~mask);
+ WREG32_P(RADEON_CRTC_EXT_CNTL, mask, ~(mask | crtc_ext_cntl));
}
radeon_crtc->enabled = false;
/* adjust pm to dpms changes AFTER disabling crtcs */
break;
}
- WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
+ /* handled in radeon_crtc_dpms() */
+ if (!(rdev->flags & RADEON_SINGLE_CRTC))
+ WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
WREG32(RADEON_DAC_CNTL, dac_cntl);
WREG32(RADEON_DAC_MACRO_CNTL, dac_macro_cntl);
if (ASIC_IS_R300(rdev))
tmp |= (0x1b6 << RADEON_DAC_FORCE_DATA_SHIFT);
+ else if (ASIC_IS_RV100(rdev))
+ tmp |= (0x1ac << RADEON_DAC_FORCE_DATA_SHIFT);
else
tmp |= (0x180 << RADEON_DAC_FORCE_DATA_SHIFT);
tmp |= RADEON_DAC_RANGE_CNTL_PS2 | RADEON_DAC_CMP_EN;
WREG32(RADEON_DAC_CNTL, tmp);
+ tmp = dac_macro_cntl;
tmp &= ~(RADEON_DAC_PDWN_R |
RADEON_DAC_PDWN_G |
RADEON_DAC_PDWN_B);
} else {
if (is_tv)
WREG32(RADEON_TV_MASTER_CNTL, tv_master_cntl);
- else
+ /* handled in radeon_crtc_dpms() */
+ else if (!(rdev->flags & RADEON_SINGLE_CRTC))
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
}
return found;
}
+static bool radeon_legacy_ext_dac_detect(struct drm_encoder *encoder,
+ struct drm_connector *connector)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ uint32_t gpio_monid, fp2_gen_cntl, disp_output_cntl, crtc2_gen_cntl;
+ uint32_t disp_lin_trans_grph_a, disp_lin_trans_grph_b, disp_lin_trans_grph_c;
+ uint32_t disp_lin_trans_grph_d, disp_lin_trans_grph_e, disp_lin_trans_grph_f;
+ uint32_t tmp, crtc2_h_total_disp, crtc2_v_total_disp;
+ uint32_t crtc2_h_sync_strt_wid, crtc2_v_sync_strt_wid;
+ bool found = false;
+ int i;
+
+ /* save the regs we need */
+ gpio_monid = RREG32(RADEON_GPIO_MONID);
+ fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
+ disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
+ crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+ disp_lin_trans_grph_a = RREG32(RADEON_DISP_LIN_TRANS_GRPH_A);
+ disp_lin_trans_grph_b = RREG32(RADEON_DISP_LIN_TRANS_GRPH_B);
+ disp_lin_trans_grph_c = RREG32(RADEON_DISP_LIN_TRANS_GRPH_C);
+ disp_lin_trans_grph_d = RREG32(RADEON_DISP_LIN_TRANS_GRPH_D);
+ disp_lin_trans_grph_e = RREG32(RADEON_DISP_LIN_TRANS_GRPH_E);
+ disp_lin_trans_grph_f = RREG32(RADEON_DISP_LIN_TRANS_GRPH_F);
+ crtc2_h_total_disp = RREG32(RADEON_CRTC2_H_TOTAL_DISP);
+ crtc2_v_total_disp = RREG32(RADEON_CRTC2_V_TOTAL_DISP);
+ crtc2_h_sync_strt_wid = RREG32(RADEON_CRTC2_H_SYNC_STRT_WID);
+ crtc2_v_sync_strt_wid = RREG32(RADEON_CRTC2_V_SYNC_STRT_WID);
+
+ tmp = RREG32(RADEON_GPIO_MONID);
+ tmp &= ~RADEON_GPIO_A_0;
+ WREG32(RADEON_GPIO_MONID, tmp);
+
+ WREG32(RADEON_FP2_GEN_CNTL, (RADEON_FP2_ON |
+ RADEON_FP2_PANEL_FORMAT |
+ R200_FP2_SOURCE_SEL_TRANS_UNIT |
+ RADEON_FP2_DVO_EN |
+ R200_FP2_DVO_RATE_SEL_SDR));
+
+ WREG32(RADEON_DISP_OUTPUT_CNTL, (RADEON_DISP_DAC_SOURCE_RMX |
+ RADEON_DISP_TRANS_MATRIX_GRAPHICS));
+
+ WREG32(RADEON_CRTC2_GEN_CNTL, (RADEON_CRTC2_EN |
+ RADEON_CRTC2_DISP_REQ_EN_B));
+
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, 0x000003f0);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, 0x000003f0);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, 0x00000000);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, 0x000003f0);
+
+ WREG32(RADEON_CRTC2_H_TOTAL_DISP, 0x01000008);
+ WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, 0x00000800);
+ WREG32(RADEON_CRTC2_V_TOTAL_DISP, 0x00080001);
+ WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, 0x00000080);
+
+ for (i = 0; i < 200; i++) {
+ tmp = RREG32(RADEON_GPIO_MONID);
+ if (tmp & RADEON_GPIO_Y_0)
+ found = true;
+
+ if (found)
+ break;
+
+ if (!drm_can_sleep())
+ mdelay(1);
+ else
+ msleep(1);
+ }
+
+ /* restore the regs we used */
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_A, disp_lin_trans_grph_a);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_B, disp_lin_trans_grph_b);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_C, disp_lin_trans_grph_c);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_D, disp_lin_trans_grph_d);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_E, disp_lin_trans_grph_e);
+ WREG32(RADEON_DISP_LIN_TRANS_GRPH_F, disp_lin_trans_grph_f);
+ WREG32(RADEON_CRTC2_H_TOTAL_DISP, crtc2_h_total_disp);
+ WREG32(RADEON_CRTC2_V_TOTAL_DISP, crtc2_v_total_disp);
+ WREG32(RADEON_CRTC2_H_SYNC_STRT_WID, crtc2_h_sync_strt_wid);
+ WREG32(RADEON_CRTC2_V_SYNC_STRT_WID, crtc2_v_sync_strt_wid);
+ WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+ WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+ WREG32(RADEON_FP2_GEN_CNTL, fp2_gen_cntl);
+ WREG32(RADEON_GPIO_MONID, gpio_monid);
+
+ return found;
+}
+
static enum drm_connector_status radeon_legacy_tv_dac_detect(struct drm_encoder *encoder,
struct drm_connector *connector)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
- uint32_t crtc2_gen_cntl, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
- uint32_t disp_hw_debug, disp_output_cntl, gpiopad_a, pixclks_cntl, tmp;
+ uint32_t crtc2_gen_cntl = 0, tv_dac_cntl, dac_cntl2, dac_ext_cntl;
+ uint32_t gpiopad_a = 0, pixclks_cntl, tmp;
+ uint32_t disp_output_cntl = 0, disp_hw_debug = 0, crtc_ext_cntl = 0;
enum drm_connector_status found = connector_status_disconnected;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
return connector_status_disconnected;
}
+ /* R200 uses an external DAC for secondary DAC */
+ if (rdev->family == CHIP_R200) {
+ if (radeon_legacy_ext_dac_detect(encoder, connector))
+ found = connector_status_connected;
+ return found;
+ }
+
/* save the regs we need */
pixclks_cntl = RREG32_PLL(RADEON_PIXCLKS_CNTL);
- gpiopad_a = ASIC_IS_R300(rdev) ? RREG32(RADEON_GPIOPAD_A) : 0;
- disp_output_cntl = ASIC_IS_R300(rdev) ? RREG32(RADEON_DISP_OUTPUT_CNTL) : 0;
- disp_hw_debug = ASIC_IS_R300(rdev) ? 0 : RREG32(RADEON_DISP_HW_DEBUG);
- crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
+ } else {
+ if (ASIC_IS_R300(rdev)) {
+ gpiopad_a = RREG32(RADEON_GPIOPAD_A);
+ disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL);
+ } else {
+ disp_hw_debug = RREG32(RADEON_DISP_HW_DEBUG);
+ }
+ crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
+ }
tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
dac_ext_cntl = RREG32(RADEON_DAC_EXT_CNTL);
dac_cntl2 = RREG32(RADEON_DAC_CNTL2);
| RADEON_PIX2CLK_DAC_ALWAYS_ONb);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
- if (ASIC_IS_R300(rdev))
- WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
-
- tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
- tmp |= RADEON_CRTC2_CRT2_ON |
- (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
-
- WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
-
- if (ASIC_IS_R300(rdev)) {
- tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
- tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
- WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ tmp = crtc_ext_cntl | RADEON_CRTC_CRT_ON;
+ WREG32(RADEON_CRTC_EXT_CNTL, tmp);
} else {
- tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
- WREG32(RADEON_DISP_HW_DEBUG, tmp);
+ tmp = crtc2_gen_cntl & ~RADEON_CRTC2_PIX_WIDTH_MASK;
+ tmp |= RADEON_CRTC2_CRT2_ON |
+ (2 << RADEON_CRTC2_PIX_WIDTH_SHIFT);
+ WREG32(RADEON_CRTC2_GEN_CNTL, tmp);
+
+ if (ASIC_IS_R300(rdev)) {
+ WREG32_P(RADEON_GPIOPAD_A, 1, ~1);
+ tmp = disp_output_cntl & ~RADEON_DISP_TVDAC_SOURCE_MASK;
+ tmp |= RADEON_DISP_TVDAC_SOURCE_CRTC2;
+ WREG32(RADEON_DISP_OUTPUT_CNTL, tmp);
+ } else {
+ tmp = disp_hw_debug & ~RADEON_CRT2_DISP1_SEL;
+ WREG32(RADEON_DISP_HW_DEBUG, tmp);
+ }
}
tmp = RADEON_TV_DAC_NBLANK |
WREG32(RADEON_DAC_CNTL2, dac_cntl2);
WREG32(RADEON_DAC_EXT_CNTL, dac_ext_cntl);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
- WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
- if (ASIC_IS_R300(rdev)) {
- WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
- WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
+ if (rdev->flags & RADEON_SINGLE_CRTC) {
+ WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl);
} else {
- WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+ WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+ if (ASIC_IS_R300(rdev)) {
+ WREG32(RADEON_DISP_OUTPUT_CNTL, disp_output_cntl);
+ WREG32_P(RADEON_GPIOPAD_A, gpiopad_a, ~1);
+ } else {
+ WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
+ }
}
+
WREG32_PLL(RADEON_PIXCLKS_CNTL, pixclks_cntl);
return found;
int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr,
const char *front, char **urb_buf_ptr,
- u32 byte_offset, u32 byte_width,
+ u32 byte_offset, u32 device_byte_offset, u32 byte_width,
int *ident_ptr, int *sent_ptr);
int udl_dumb_create(struct drm_file *file_priv,
list_for_each_entry(cur, &fbdefio->pagelist, lru) {
if (udl_render_hline(dev, (ufbdev->ufb.base.bits_per_pixel / 8),
- &urb, (char *) info->fix.smem_start,
- &cmd, cur->index << PAGE_SHIFT,
- PAGE_SIZE, &bytes_identical, &bytes_sent))
+ &urb, (char *) info->fix.smem_start,
+ &cmd, cur->index << PAGE_SHIFT,
+ cur->index << PAGE_SHIFT,
+ PAGE_SIZE, &bytes_identical, &bytes_sent))
goto error;
bytes_rendered += PAGE_SIZE;
}
for (i = y; i < y + height ; i++) {
const int line_offset = fb->base.pitches[0] * i;
const int byte_offset = line_offset + (x * bpp);
-
+ const int dev_byte_offset = (fb->base.width * bpp * i) + (x * bpp);
if (udl_render_hline(dev, bpp, &urb,
(char *) fb->obj->vmapping,
- &cmd, byte_offset, width * bpp,
+ &cmd, byte_offset, dev_byte_offset,
+ width * bpp,
&bytes_identical, &bytes_sent))
goto error;
}
*/
int udl_render_hline(struct drm_device *dev, int bpp, struct urb **urb_ptr,
const char *front, char **urb_buf_ptr,
- u32 byte_offset, u32 byte_width,
+ u32 byte_offset, u32 device_byte_offset,
+ u32 byte_width,
int *ident_ptr, int *sent_ptr)
{
const u8 *line_start, *line_end, *next_pixel;
- u32 base16 = 0 + (byte_offset / bpp) * 2;
+ u32 base16 = 0 + (device_byte_offset / bpp) * 2;
struct urb *urb = *urb_ptr;
u8 *cmd = *urb_buf_ptr;
u8 *cmd_end = (u8 *) urb->transfer_buffer + urb->transfer_buffer_length;
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a
#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b
#define MS_RDESC 0x08
#define MS_NOGET 0x10
#define MS_DUPLICATE_USAGES 0x20
+#define MS_RDESC_3K 0x40
-/*
- * Microsoft Wireless Desktop Receiver (Model 1028) has
- * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
- */
static __u8 *ms_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
+ /*
+ * Microsoft Wireless Desktop Receiver (Model 1028) has
+ * 'Usage Min/Max' where it ought to have 'Physical Min/Max'
+ */
if ((quirks & MS_RDESC) && *rsize == 571 && rdesc[557] == 0x19 &&
rdesc[559] == 0x29) {
hid_info(hdev, "fixing up Microsoft Wireless Receiver Model 1028 report descriptor\n");
rdesc[557] = 0x35;
rdesc[559] = 0x45;
}
+ /* the same as above (s/usage/physical/) */
+ if ((quirks & MS_RDESC_3K) && *rsize == 106 &&
+ !memcmp((char []){ 0x19, 0x00, 0x29, 0xff },
+ &rdesc[94], 4)) {
+ rdesc[94] = 0x35;
+ rdesc[96] = 0x45;
+ }
return rdesc;
}
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB),
.driver_data = MS_PRESENTER },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K),
- .driver_data = MS_ERGONOMY },
+ .driver_data = MS_ERGONOMY | MS_RDESC_3K },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0),
.driver_data = MS_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),
},
{ .name = MT_CLS_GENERALTOUCH_PWT_TENFINGERS,
.quirks = MT_QUIRK_NOT_SEEN_MEANS_UP |
- MT_QUIRK_SLOT_IS_CONTACTNUMBER,
- .maxcontacts = 10
+ MT_QUIRK_SLOT_IS_CONTACTNUMBER
},
{ .name = MT_CLS_FLATFROG,
* contact max are global to the report */
td->last_field_index = field->index;
return -1;
- }
case HID_DG_TOUCH:
/* Legacy devices use TIPSWITCH and not TOUCH.
* Let's just ignore this field. */
return -1;
+ }
/* let hid-input decide for the others */
return 0;
* fam15h_power.c - AMD Family 15h processor power monitoring
*
* Copyright (c) 2011 Advanced Micro Devices, Inc.
- * Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+ * Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
*
*
* This driver is free software; you can redistribute it and/or
#include <asm/processor.h>
MODULE_DESCRIPTION("AMD Family 15h CPU processor power monitor");
-MODULE_AUTHOR("Andreas Herrmann <andreas.herrmann3@amd.com>");
+MODULE_AUTHOR("Andreas Herrmann <herrmann.der.user@googlemail.com>");
MODULE_LICENSE("GPL");
/* D18F3 */
.driver = {
.name = "gpio-fan",
.pm = GPIO_FAN_PM,
+#ifdef CONFIG_OF_GPIO
.of_match_table = of_match_ptr(of_gpio_fan_match),
+#endif
},
};
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_MUX) += i2c-mux.o
obj-y += algos/ busses/ muxes/
+obj-$(CONFIG_I2C_STUB) += i2c-stub.o
ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
CFLAGS_i2c-core.o := -Wno-deprecated-declarations
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
select CHECK_SIGNATURE if X86 && DMI
- select GPIOLIB if I2C_MUX
help
If you say yes to this option, support will be included for the Intel
801 family of mainboard I2C interfaces. Specifically, the following
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
-obj-$(CONFIG_I2C_STUB) += i2c-stub.o
obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
#include <linux/wait.h>
#include <linux/err.h>
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
#include <linux/gpio.h>
#include <linux/i2c-mux-gpio.h>
#include <linux/platform_device.h>
int len;
u8 *data;
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
const struct i801_mux_config *mux_drvdata;
struct platform_device *mux_pdev;
#endif
static void __devinit i801_probe_optional_slaves(struct i801_priv *priv) {}
#endif /* CONFIG_X86 && CONFIG_DMI */
-#if defined CONFIG_I2C_MUX || defined CONFIG_I2C_MUX_MODULE
+#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
+ defined CONFIG_DMI
static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
.gpio_chip = "gpio_ich",
.values = { 0x02, 0x03 },
id = dmi_first_match(mux_dmi_table);
if (id) {
- /* Remove from branch classes from trunk */
+ /* Remove branch classes from trunk */
mux_config = id->driver_data;
for (i = 0; i < mux_config->n_values; i++)
class &= ~mux_config->classes[i];
/*
* Freescale MXS I2C bus driver
*
- * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K.
*
* based on a (non-working) driver which was:
*
#define DRIVER_NAME "mxs-i2c"
-static bool use_pioqueue;
-module_param(use_pioqueue, bool, 0);
-MODULE_PARM_DESC(use_pioqueue, "Use PIOQUEUE mode for transfer instead of DMA");
-
#define MXS_I2C_CTRL0 (0x00)
#define MXS_I2C_CTRL0_SET (0x04)
MXS_I2C_CTRL1_SLAVE_STOP_IRQ | \
MXS_I2C_CTRL1_SLAVE_IRQ)
-#define MXS_I2C_QUEUECTRL (0x60)
-#define MXS_I2C_QUEUECTRL_SET (0x64)
-#define MXS_I2C_QUEUECTRL_CLR (0x68)
-
-#define MXS_I2C_QUEUECTRL_QUEUE_RUN 0x20
-#define MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE 0x04
-
-#define MXS_I2C_QUEUESTAT (0x70)
-#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000
-#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F
-
-#define MXS_I2C_QUEUECMD (0x80)
-
-#define MXS_I2C_QUEUEDATA (0x90)
-
-#define MXS_I2C_DATA (0xa0)
-
#define MXS_CMD_I2C_SELECT (MXS_I2C_CTRL0_RETAIN_CLOCK | \
MXS_I2C_CTRL0_PRE_SEND_START | \
const struct mxs_i2c_speed_config *speed;
/* DMA support components */
- bool dma_mode;
int dma_channel;
struct dma_chan *dmach;
struct mxs_dma_data dma_data;
writel(i2c->speed->timing2, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
- if (i2c->dma_mode)
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_CLR);
- else
- writel(MXS_I2C_QUEUECTRL_PIO_QUEUE_MODE,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
-}
-
-static void mxs_i2c_pioq_setup_read(struct mxs_i2c_dev *i2c, u8 addr, int len,
- int flags)
-{
- u32 data;
-
- writel(MXS_CMD_I2C_SELECT, i2c->regs + MXS_I2C_QUEUECMD);
-
- data = (addr << 1) | I2C_SMBUS_READ;
- writel(data, i2c->regs + MXS_I2C_DATA);
-
- data = MXS_CMD_I2C_READ | MXS_I2C_CTRL0_XFER_COUNT(len) | flags;
- writel(data, i2c->regs + MXS_I2C_QUEUECMD);
-}
-
-static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
- u8 addr, u8 *buf, int len, int flags)
-{
- u32 data;
- int i, shifts_left;
-
- data = MXS_CMD_I2C_WRITE | MXS_I2C_CTRL0_XFER_COUNT(len + 1) | flags;
- writel(data, i2c->regs + MXS_I2C_QUEUECMD);
-
- /*
- * We have to copy the slave address (u8) and buffer (arbitrary number
- * of u8) into the data register (u32). To achieve that, the u8 are put
- * into the MSBs of 'data' which is then shifted for the next u8. When
- * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
- * looks like this:
- *
- * 3 2 1 0
- * 10987654|32109876|54321098|76543210
- * --------+--------+--------+--------
- * buffer+2|buffer+1|buffer+0|slave_addr
- */
-
- data = ((addr << 1) | I2C_SMBUS_WRITE) << 24;
-
- for (i = 0; i < len; i++) {
- data >>= 8;
- data |= buf[i] << 24;
- if ((i & 3) == 2)
- writel(data, i2c->regs + MXS_I2C_DATA);
- }
-
- /* Write out the remaining bytes if any */
- shifts_left = 24 - (i & 3) * 8;
- if (shifts_left)
- writel(data >> shifts_left, i2c->regs + MXS_I2C_DATA);
-}
-
-/*
- * TODO: should be replaceable with a waitqueue and RD_QUEUE_IRQ (setting the
- * rd_threshold to 1). Couldn't get this to work, though.
- */
-static int mxs_i2c_wait_for_data(struct mxs_i2c_dev *i2c)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(1000);
-
- while (readl(i2c->regs + MXS_I2C_QUEUESTAT)
- & MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY) {
- if (time_after(jiffies, timeout))
- return -ETIMEDOUT;
- cond_resched();
- }
-
- return 0;
-}
-
-static int mxs_i2c_finish_read(struct mxs_i2c_dev *i2c, u8 *buf, int len)
-{
- u32 uninitialized_var(data);
- int i;
-
- for (i = 0; i < len; i++) {
- if ((i & 3) == 0) {
- if (mxs_i2c_wait_for_data(i2c))
- return -ETIMEDOUT;
- data = readl(i2c->regs + MXS_I2C_QUEUEDATA);
- }
- buf[i] = data & 0xff;
- data >>= 8;
- }
-
- return 0;
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
init_completion(&i2c->cmd_complete);
i2c->cmd_err = 0;
- if (i2c->dma_mode) {
- ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
- if (ret)
- return ret;
- } else {
- if (msg->flags & I2C_M_RD) {
- mxs_i2c_pioq_setup_read(i2c, msg->addr,
- msg->len, flags);
- } else {
- mxs_i2c_pioq_setup_write(i2c, msg->addr, msg->buf,
- msg->len, flags);
- }
-
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
- i2c->regs + MXS_I2C_QUEUECTRL_SET);
- }
+ ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
+ if (ret)
+ return ret;
ret = wait_for_completion_timeout(&i2c->cmd_complete,
msecs_to_jiffies(1000));
if (ret == 0)
goto timeout;
- if (!i2c->dma_mode && !i2c->cmd_err && (msg->flags & I2C_M_RD)) {
- ret = mxs_i2c_finish_read(i2c, msg->buf, msg->len);
- if (ret)
- goto timeout;
- }
-
if (i2c->cmd_err == -ENXIO)
mxs_i2c_reset(i2c);
- else
- writel(MXS_I2C_QUEUECTRL_QUEUE_RUN,
- i2c->regs + MXS_I2C_QUEUECTRL_CLR);
dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err);
timeout:
dev_dbg(i2c->dev, "Timeout!\n");
- if (i2c->dma_mode)
- mxs_i2c_dma_finish(i2c);
+ mxs_i2c_dma_finish(i2c);
mxs_i2c_reset(i2c);
return -ETIMEDOUT;
}
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
- bool is_last_cmd;
if (!stat)
return IRQ_NONE;
/* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */
i2c->cmd_err = -EIO;
- if (!i2c->dma_mode) {
- is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
- MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
-
- if (is_last_cmd || i2c->cmd_err)
- complete(&i2c->cmd_complete);
- }
-
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
return IRQ_HANDLED;
struct device_node *node = dev->of_node;
int ret;
- /*
- * The MXS I2C DMA mode is prefered and enabled by default.
- * The PIO mode is still supported, but should be used only
- * for debuging purposes etc.
- */
- i2c->dma_mode = !use_pioqueue;
- if (!i2c->dma_mode)
- dev_info(dev, "Using PIOQUEUE mode for I2C transfers!\n");
-
/*
* TODO: This is a temporary solution and should be changed
* to use generic DMA binding later when the helpers get in.
ret = of_property_read_u32(node, "fsl,i2c-dma-channel",
&i2c->dma_channel);
if (ret) {
- dev_warn(dev, "Failed to get DMA channel, using PIOQUEUE!\n");
- i2c->dma_mode = 0;
+ dev_err(dev, "Failed to get DMA channel!\n");
+ return -ENODEV;
}
ret = of_property_read_u32(node, "clock-frequency", &speed);
}
/* Setup the DMA */
- if (i2c->dma_mode) {
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- i2c->dma_data.chan_irq = dmairq;
- i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
- if (!i2c->dmach) {
- dev_err(dev, "Failed to request dma\n");
- return -ENODEV;
- }
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ i2c->dma_data.chan_irq = dmairq;
+ i2c->dmach = dma_request_channel(mask, mxs_i2c_dma_filter, i2c);
+ if (!i2c->dmach) {
+ dev_err(dev, "Failed to request dma\n");
+ return -ENODEV;
}
platform_set_drvdata(pdev, i2c);
pm_runtime_get_sync(&dev->adev->dev);
- clk_enable(dev->clk);
+ status = clk_prepare_enable(dev->clk);
+ if (status) {
+ dev_err(&dev->adev->dev, "can't prepare_enable clock\n");
+ goto out_clk;
+ }
status = init_hw(dev);
if (status)
}
out:
- clk_disable(dev->clk);
+ clk_disable_unprepare(dev->clk);
+out_clk:
pm_runtime_put_sync(&dev->adev->dev);
dev->busy = false;
+++ /dev/null
-/*
- i2c-stub.c - I2C/SMBus chip emulator
-
- Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
- Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#define DEBUG 1
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/i2c.h>
-
-#define MAX_CHIPS 10
-#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \
- I2C_FUNC_SMBUS_I2C_BLOCK)
-
-static unsigned short chip_addr[MAX_CHIPS];
-module_param_array(chip_addr, ushort, NULL, S_IRUGO);
-MODULE_PARM_DESC(chip_addr,
- "Chip addresses (up to 10, between 0x03 and 0x77)");
-
-static unsigned long functionality = STUB_FUNC;
-module_param(functionality, ulong, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(functionality, "Override functionality bitfield");
-
-struct stub_chip {
- u8 pointer;
- u16 words[256]; /* Byte operations use the LSB as per SMBus
- specification */
-};
-
-static struct stub_chip *stub_chips;
-
-/* Return negative errno on error. */
-static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags,
- char read_write, u8 command, int size, union i2c_smbus_data * data)
-{
- s32 ret;
- int i, len;
- struct stub_chip *chip = NULL;
-
- /* Search for the right chip */
- for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
- if (addr == chip_addr[i]) {
- chip = stub_chips + i;
- break;
- }
- }
- if (!chip)
- return -ENODEV;
-
- switch (size) {
-
- case I2C_SMBUS_QUICK:
- dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr);
- ret = 0;
- break;
-
- case I2C_SMBUS_BYTE:
- if (read_write == I2C_SMBUS_WRITE) {
- chip->pointer = command;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "wrote 0x%02x.\n",
- addr, command);
- } else {
- data->byte = chip->words[chip->pointer++] & 0xff;
- dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, "
- "read 0x%02x.\n",
- addr, data->byte);
- }
-
- ret = 0;
- break;
-
- case I2C_SMBUS_BYTE_DATA:
- if (read_write == I2C_SMBUS_WRITE) {
- chip->words[command] &= 0xff00;
- chip->words[command] |= data->byte;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "wrote 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
- } else {
- data->byte = chip->words[command] & 0xff;
- dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, "
- "read 0x%02x at 0x%02x.\n",
- addr, data->byte, command);
- }
- chip->pointer = command + 1;
-
- ret = 0;
- break;
-
- case I2C_SMBUS_WORD_DATA:
- if (read_write == I2C_SMBUS_WRITE) {
- chip->words[command] = data->word;
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "wrote 0x%04x at 0x%02x.\n",
- addr, data->word, command);
- } else {
- data->word = chip->words[command];
- dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, "
- "read 0x%04x at 0x%02x.\n",
- addr, data->word, command);
- }
-
- ret = 0;
- break;
-
- case I2C_SMBUS_I2C_BLOCK_DATA:
- len = data->block[0];
- if (read_write == I2C_SMBUS_WRITE) {
- for (i = 0; i < len; i++) {
- chip->words[command + i] &= 0xff00;
- chip->words[command + i] |= data->block[1 + i];
- }
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "wrote %d bytes at 0x%02x.\n",
- addr, len, command);
- } else {
- for (i = 0; i < len; i++) {
- data->block[1 + i] =
- chip->words[command + i] & 0xff;
- }
- dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
- "read %d bytes at 0x%02x.\n",
- addr, len, command);
- }
-
- ret = 0;
- break;
-
- default:
- dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
- ret = -EOPNOTSUPP;
- break;
- } /* switch (size) */
-
- return ret;
-}
-
-static u32 stub_func(struct i2c_adapter *adapter)
-{
- return STUB_FUNC & functionality;
-}
-
-static const struct i2c_algorithm smbus_algorithm = {
- .functionality = stub_func,
- .smbus_xfer = stub_xfer,
-};
-
-static struct i2c_adapter stub_adapter = {
- .owner = THIS_MODULE,
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
- .algo = &smbus_algorithm,
- .name = "SMBus stub driver",
-};
-
-static int __init i2c_stub_init(void)
-{
- int i, ret;
-
- if (!chip_addr[0]) {
- printk(KERN_ERR "i2c-stub: Please specify a chip address\n");
- return -ENODEV;
- }
-
- for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
- if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
- printk(KERN_ERR "i2c-stub: Invalid chip address "
- "0x%02x\n", chip_addr[i]);
- return -EINVAL;
- }
-
- printk(KERN_INFO "i2c-stub: Virtual chip at 0x%02x\n",
- chip_addr[i]);
- }
-
- /* Allocate memory for all chips at once */
- stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL);
- if (!stub_chips) {
- printk(KERN_ERR "i2c-stub: Out of memory\n");
- return -ENOMEM;
- }
-
- ret = i2c_add_adapter(&stub_adapter);
- if (ret)
- kfree(stub_chips);
- return ret;
-}
-
-static void __exit i2c_stub_exit(void)
-{
- i2c_del_adapter(&stub_adapter);
- kfree(stub_chips);
-}
-
-MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
-MODULE_DESCRIPTION("I2C stub driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_stub_init);
-module_exit(i2c_stub_exit);
-
}
ret = devm_request_irq(&pdev->dev, i2c_dev->irq,
- tegra_i2c_isr, 0, pdev->name, i2c_dev);
+ tegra_i2c_isr, 0, dev_name(&pdev->dev), i2c_dev);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
return ret;
--- /dev/null
+/*
+ i2c-stub.c - I2C/SMBus chip emulator
+
+ Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
+ Copyright (C) 2007, 2012 Jean Delvare <khali@linux-fr.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#define DEBUG 1
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+
+#define MAX_CHIPS 10
+#define STUB_FUNC (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \
+ I2C_FUNC_SMBUS_I2C_BLOCK)
+
+static unsigned short chip_addr[MAX_CHIPS];
+module_param_array(chip_addr, ushort, NULL, S_IRUGO);
+MODULE_PARM_DESC(chip_addr,
+ "Chip addresses (up to 10, between 0x03 and 0x77)");
+
+static unsigned long functionality = STUB_FUNC;
+module_param(functionality, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(functionality, "Override functionality bitfield");
+
+struct stub_chip {
+ u8 pointer;
+ u16 words[256]; /* Byte operations use the LSB as per SMBus
+ specification */
+};
+
+static struct stub_chip *stub_chips;
+
+/* Return negative errno on error. */
+static s32 stub_xfer(struct i2c_adapter *adap, u16 addr, unsigned short flags,
+ char read_write, u8 command, int size, union i2c_smbus_data *data)
+{
+ s32 ret;
+ int i, len;
+ struct stub_chip *chip = NULL;
+
+ /* Search for the right chip */
+ for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
+ if (addr == chip_addr[i]) {
+ chip = stub_chips + i;
+ break;
+ }
+ }
+ if (!chip)
+ return -ENODEV;
+
+ switch (size) {
+
+ case I2C_SMBUS_QUICK:
+ dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr);
+ ret = 0;
+ break;
+
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_WRITE) {
+ chip->pointer = command;
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, wrote 0x%02x.\n",
+ addr, command);
+ } else {
+ data->byte = chip->words[chip->pointer++] & 0xff;
+ dev_dbg(&adap->dev,
+ "smbus byte - addr 0x%02x, read 0x%02x.\n",
+ addr, data->byte);
+ }
+
+ ret = 0;
+ break;
+
+ case I2C_SMBUS_BYTE_DATA:
+ if (read_write == I2C_SMBUS_WRITE) {
+ chip->words[command] &= 0xff00;
+ chip->words[command] |= data->byte;
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, wrote 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
+ } else {
+ data->byte = chip->words[command] & 0xff;
+ dev_dbg(&adap->dev,
+ "smbus byte data - addr 0x%02x, read 0x%02x at 0x%02x.\n",
+ addr, data->byte, command);
+ }
+ chip->pointer = command + 1;
+
+ ret = 0;
+ break;
+
+ case I2C_SMBUS_WORD_DATA:
+ if (read_write == I2C_SMBUS_WRITE) {
+ chip->words[command] = data->word;
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, wrote 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
+ } else {
+ data->word = chip->words[command];
+ dev_dbg(&adap->dev,
+ "smbus word data - addr 0x%02x, read 0x%04x at 0x%02x.\n",
+ addr, data->word, command);
+ }
+
+ ret = 0;
+ break;
+
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ len = data->block[0];
+ if (read_write == I2C_SMBUS_WRITE) {
+ for (i = 0; i < len; i++) {
+ chip->words[command + i] &= 0xff00;
+ chip->words[command + i] |= data->block[1 + i];
+ }
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, wrote %d bytes at 0x%02x.\n",
+ addr, len, command);
+ } else {
+ for (i = 0; i < len; i++) {
+ data->block[1 + i] =
+ chip->words[command + i] & 0xff;
+ }
+ dev_dbg(&adap->dev,
+ "i2c block data - addr 0x%02x, read %d bytes at 0x%02x.\n",
+ addr, len, command);
+ }
+
+ ret = 0;
+ break;
+
+ default:
+ dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
+ ret = -EOPNOTSUPP;
+ break;
+ } /* switch (size) */
+
+ return ret;
+}
+
+static u32 stub_func(struct i2c_adapter *adapter)
+{
+ return STUB_FUNC & functionality;
+}
+
+static const struct i2c_algorithm smbus_algorithm = {
+ .functionality = stub_func,
+ .smbus_xfer = stub_xfer,
+};
+
+static struct i2c_adapter stub_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .algo = &smbus_algorithm,
+ .name = "SMBus stub driver",
+};
+
+static int __init i2c_stub_init(void)
+{
+ int i, ret;
+
+ if (!chip_addr[0]) {
+ pr_err("i2c-stub: Please specify a chip address\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
+ if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
+ pr_err("i2c-stub: Invalid chip address 0x%02x\n",
+ chip_addr[i]);
+ return -EINVAL;
+ }
+
+ pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
+ }
+
+ /* Allocate memory for all chips at once */
+ stub_chips = kzalloc(i * sizeof(struct stub_chip), GFP_KERNEL);
+ if (!stub_chips) {
+ pr_err("i2c-stub: Out of memory\n");
+ return -ENOMEM;
+ }
+
+ ret = i2c_add_adapter(&stub_adapter);
+ if (ret)
+ kfree(stub_chips);
+ return ret;
+}
+
+static void __exit i2c_stub_exit(void)
+{
+ i2c_del_adapter(&stub_adapter);
+ kfree(stub_chips);
+}
+
+MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
+MODULE_DESCRIPTION("I2C stub driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_stub_init);
+module_exit(i2c_stub_exit);
if (!mt)
return;
- oldest = 0;
+ oldest = NULL;
oldid = mt->trkid;
count = 0;
static void __input_release_device(struct input_handle *handle)
{
struct input_dev *dev = handle->dev;
+ struct input_handle *grabber;
- if (dev->grab == handle) {
+ grabber = rcu_dereference_protected(dev->grab,
+ lockdep_is_held(&dev->mutex));
+ if (grabber == handle) {
rcu_assign_pointer(dev->grab, NULL);
/* Make sure input_pass_event() notices that grab is gone */
synchronize_rcu();
/**
* input_allocate_device - allocate memory for new input device
*
- * Returns prepared struct input_dev or NULL.
+ * Returns prepared struct input_dev or %NULL.
*
* NOTE: Use input_free_device() to free devices that have not been
* registered; input_unregister_device() should be used for already
}
EXPORT_SYMBOL(input_allocate_device);
+struct input_devres {
+ struct input_dev *input;
+};
+
+static int devm_input_device_match(struct device *dev, void *res, void *data)
+{
+ struct input_devres *devres = res;
+
+ return devres->input == data;
+}
+
+static void devm_input_device_release(struct device *dev, void *res)
+{
+ struct input_devres *devres = res;
+ struct input_dev *input = devres->input;
+
+ dev_dbg(dev, "%s: dropping reference to %s\n",
+ __func__, dev_name(&input->dev));
+ input_put_device(input);
+}
+
+/**
+ * devm_input_allocate_device - allocate managed input device
+ * @dev: device owning the input device being created
+ *
+ * Returns prepared struct input_dev or %NULL.
+ *
+ * Managed input devices do not need to be explicitly unregistered or
+ * freed as it will be done automatically when owner device unbinds from
+ * its driver (or binding fails). Once managed input device is allocated,
+ * it is ready to be set up and registered in the same fashion as regular
+ * input device. There are no special devm_input_device_[un]register()
+ * variants, regular ones work with both managed and unmanaged devices.
+ *
+ * NOTE: the owner device is set up as parent of input device and users
+ * should not override it.
+ */
+
+struct input_dev *devm_input_allocate_device(struct device *dev)
+{
+ struct input_dev *input;
+ struct input_devres *devres;
+
+ devres = devres_alloc(devm_input_device_release,
+ sizeof(struct input_devres), GFP_KERNEL);
+ if (!devres)
+ return NULL;
+
+ input = input_allocate_device();
+ if (!input) {
+ devres_free(devres);
+ return NULL;
+ }
+
+ input->dev.parent = dev;
+ input->devres_managed = true;
+
+ devres->input = input;
+ devres_add(dev, devres);
+
+ return input;
+}
+EXPORT_SYMBOL(devm_input_allocate_device);
+
/**
* input_free_device - free memory occupied by input_dev structure
* @dev: input device to free
*/
void input_free_device(struct input_dev *dev)
{
- if (dev)
+ if (dev) {
+ if (dev->devres_managed)
+ WARN_ON(devres_destroy(dev->dev.parent,
+ devm_input_device_release,
+ devm_input_device_match,
+ dev));
input_put_device(dev);
+ }
}
EXPORT_SYMBOL(input_free_device);
INPUT_CLEANSE_BITMASK(dev, SW, sw);
}
+static void __input_unregister_device(struct input_dev *dev)
+{
+ struct input_handle *handle, *next;
+
+ input_disconnect_device(dev);
+
+ mutex_lock(&input_mutex);
+
+ list_for_each_entry_safe(handle, next, &dev->h_list, d_node)
+ handle->handler->disconnect(handle);
+ WARN_ON(!list_empty(&dev->h_list));
+
+ del_timer_sync(&dev->timer);
+ list_del_init(&dev->node);
+
+ input_wakeup_procfs_readers();
+
+ mutex_unlock(&input_mutex);
+
+ device_del(&dev->dev);
+}
+
+static void devm_input_device_unregister(struct device *dev, void *res)
+{
+ struct input_devres *devres = res;
+ struct input_dev *input = devres->input;
+
+ dev_dbg(dev, "%s: unregistering device %s\n",
+ __func__, dev_name(&input->dev));
+ __input_unregister_device(input);
+}
+
/**
* input_register_device - register device with input core
* @dev: device to be registered
int input_register_device(struct input_dev *dev)
{
static atomic_t input_no = ATOMIC_INIT(0);
+ struct input_devres *devres = NULL;
struct input_handler *handler;
unsigned int packet_size;
const char *path;
int error;
+ if (dev->devres_managed) {
+ devres = devres_alloc(devm_input_device_unregister,
+ sizeof(struct input_devres), GFP_KERNEL);
+ if (!devres)
+ return -ENOMEM;
+
+ devres->input = dev;
+ }
+
/* Every input device generates EV_SYN/SYN_REPORT events. */
__set_bit(EV_SYN, dev->evbit);
dev->max_vals = max(dev->hint_events_per_packet, packet_size) + 2;
dev->vals = kcalloc(dev->max_vals, sizeof(*dev->vals), GFP_KERNEL);
- if (!dev->vals)
- return -ENOMEM;
+ if (!dev->vals) {
+ error = -ENOMEM;
+ goto err_devres_free;
+ }
/*
* If delay and period are pre-set by the driver, then autorepeating
error = device_add(&dev->dev);
if (error)
- return error;
+ goto err_free_vals;
path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
pr_info("%s as %s\n",
kfree(path);
error = mutex_lock_interruptible(&input_mutex);
- if (error) {
- device_del(&dev->dev);
- return error;
- }
+ if (error)
+ goto err_device_del;
list_add_tail(&dev->node, &input_dev_list);
mutex_unlock(&input_mutex);
+ if (dev->devres_managed) {
+ dev_dbg(dev->dev.parent, "%s: registering %s with devres.\n",
+ __func__, dev_name(&dev->dev));
+ devres_add(dev->dev.parent, devres);
+ }
return 0;
+
+err_device_del:
+ device_del(&dev->dev);
+err_free_vals:
+ kfree(dev->vals);
+ dev->vals = NULL;
+err_devres_free:
+ devres_free(devres);
+ return error;
}
EXPORT_SYMBOL(input_register_device);
*/
void input_unregister_device(struct input_dev *dev)
{
- struct input_handle *handle, *next;
-
- input_disconnect_device(dev);
-
- mutex_lock(&input_mutex);
-
- list_for_each_entry_safe(handle, next, &dev->h_list, d_node)
- handle->handler->disconnect(handle);
- WARN_ON(!list_empty(&dev->h_list));
-
- del_timer_sync(&dev->timer);
- list_del_init(&dev->node);
-
- input_wakeup_procfs_readers();
-
- mutex_unlock(&input_mutex);
-
- device_unregister(&dev->dev);
+ if (dev->devres_managed) {
+ WARN_ON(devres_destroy(dev->dev.parent,
+ devm_input_device_unregister,
+ devm_input_device_match,
+ dev));
+ __input_unregister_device(dev);
+ /*
+ * We do not do input_put_device() here because it will be done
+ * when 2nd devres fires up.
+ */
+ } else {
+ __input_unregister_device(dev);
+ input_put_device(dev);
+ }
}
EXPORT_SYMBOL(input_unregister_device);
{
uint8_t data[2] = { aregaddr, avalue };
struct i2c_msg msg = {
- client->addr, I2C_M_IGNORE_NAK, 2, (uint8_t *)data
+ .addr = client->addr,
+ .flags = I2C_M_IGNORE_NAK,
+ .len = 2,
+ .buf = (uint8_t *)data
};
int error;
{
uint8_t data[2] = { aregaddr };
struct i2c_msg msg_set[2] = {
- { client->addr, I2C_M_REV_DIR_ADDR, 1, (uint8_t *)data },
- { client->addr, I2C_M_RD | I2C_M_NOSTART, 1, (uint8_t *)data }
+ {
+ .addr = client->addr,
+ .flags = I2C_M_REV_DIR_ADDR,
+ .len = 1,
+ .buf = (uint8_t *)data
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD | I2C_M_NOSTART,
+ .len = 1,
+ .buf = (uint8_t *)data
+ }
};
int error;
config KEYBOARD_QT2160
tristate "Atmel AT42QT2160 Touch Sensor Chip"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
If you say yes here you get support for Atmel AT42QT2160 Touch
Sensor chip as a keyboard input.
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
struct matrix_keypad {
const struct matrix_keypad_platform_data *pdata;
bool scan_pending;
bool stopped;
bool gpio_all_disabled;
-
- unsigned short keycodes[];
};
/*
struct matrix_keypad *keypad =
container_of(work, struct matrix_keypad, work.work);
struct input_dev *input_dev = keypad->input_dev;
+ const unsigned short *keycodes = input_dev->keycode;
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
uint32_t new_state[MATRIX_MAX_COLS];
int row, col, code;
code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev,
- keypad->keycodes[code],
+ keycodes[code],
new_state[col] & (1 << row));
}
}
gpio_free(pdata->col_gpios[i]);
}
+#ifdef CONFIG_OF
+static struct matrix_keypad_platform_data * __devinit
+matrix_keypad_parse_dt(struct device *dev)
+{
+ struct matrix_keypad_platform_data *pdata;
+ struct device_node *np = dev->of_node;
+ unsigned int *gpios;
+ int i;
+
+ if (!np) {
+ dev_err(dev, "device lacks DT data\n");
+ return ERR_PTR(-ENODEV);
+ }
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "could not allocate memory for platform data\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ pdata->num_row_gpios = of_gpio_named_count(np, "row-gpios");
+ pdata->num_col_gpios = of_gpio_named_count(np, "col-gpios");
+ if (!pdata->num_row_gpios || !pdata->num_col_gpios) {
+ dev_err(dev, "number of keypad rows/columns not specified\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (of_get_property(np, "linux,no-autorepeat", NULL))
+ pdata->no_autorepeat = true;
+ if (of_get_property(np, "linux,wakeup", NULL))
+ pdata->wakeup = true;
+ if (of_get_property(np, "gpio-activelow", NULL))
+ pdata->active_low = true;
+
+ of_property_read_u32(np, "debounce-delay-ms", &pdata->debounce_ms);
+ of_property_read_u32(np, "col-scan-delay-us",
+ &pdata->col_scan_delay_us);
+
+ gpios = devm_kzalloc(dev,
+ sizeof(unsigned int) *
+ (pdata->num_row_gpios + pdata->num_col_gpios),
+ GFP_KERNEL);
+ if (!gpios) {
+ dev_err(dev, "could not allocate memory for gpios\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ gpios[i] = of_get_named_gpio(np, "row-gpios", i);
+
+ for (i = 0; i < pdata->num_col_gpios; i++)
+ gpios[pdata->num_row_gpios + i] =
+ of_get_named_gpio(np, "col-gpios", i);
+
+ pdata->row_gpios = gpios;
+ pdata->col_gpios = &gpios[pdata->num_row_gpios];
+
+ return pdata;
+}
+#else
+static inline struct matrix_keypad_platform_data *
+matrix_keypad_parse_dt(struct device *dev)
+{
+ dev_err(dev, "no platform data defined\n");
+
+ return ERR_PTR(-EINVAL);
+}
+#endif
+
static int __devinit matrix_keypad_probe(struct platform_device *pdev)
{
const struct matrix_keypad_platform_data *pdata;
- const struct matrix_keymap_data *keymap_data;
struct matrix_keypad *keypad;
struct input_dev *input_dev;
- unsigned int row_shift;
- size_t keymap_size;
int err;
- pdata = pdev->dev.platform_data;
+ pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -EINVAL;
- }
-
- keymap_data = pdata->keymap_data;
- if (!keymap_data) {
+ pdata = matrix_keypad_parse_dt(&pdev->dev);
+ if (IS_ERR(pdata)) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return PTR_ERR(pdata);
+ }
+ } else if (!pdata->keymap_data) {
dev_err(&pdev->dev, "no keymap data defined\n");
return -EINVAL;
}
- row_shift = get_count_order(pdata->num_col_gpios);
- keymap_size = (pdata->num_row_gpios << row_shift) *
- sizeof(keypad->keycodes[0]);
- keypad = kzalloc(sizeof(struct matrix_keypad) + keymap_size,
- GFP_KERNEL);
+ keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
input_dev = input_allocate_device();
if (!keypad || !input_dev) {
err = -ENOMEM;
keypad->input_dev = input_dev;
keypad->pdata = pdata;
- keypad->row_shift = row_shift;
+ keypad->row_shift = get_count_order(pdata->num_col_gpios);
keypad->stopped = true;
INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
spin_lock_init(&keypad->lock);
input_dev->open = matrix_keypad_start;
input_dev->close = matrix_keypad_stop;
- err = matrix_keypad_build_keymap(keymap_data, NULL,
+ err = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
pdata->num_row_gpios,
pdata->num_col_gpios,
- keypad->keycodes, input_dev);
- if (err)
+ NULL, input_dev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
goto err_free_mem;
+ }
if (!pdata->no_autorepeat)
__set_bit(EV_REP, input_dev->evbit);
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id matrix_keypad_dt_match[] = {
+ { .compatible = "gpio-matrix-keypad" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, matrix_keypad_dt_match);
+#endif
+
static struct platform_driver matrix_keypad_driver = {
.probe = matrix_keypad_probe,
.remove = __devexit_p(matrix_keypad_remove),
.name = "matrix-keypad",
.owner = THIS_MODULE,
.pm = &matrix_keypad_pm_ops,
+ .of_match_table = of_match_ptr(matrix_keypad_dt_match),
},
};
module_platform_driver(matrix_keypad_driver);
const struct ske_keypad_platform_data *board;
unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS];
struct clk *clk;
+ struct clk *pclk;
spinlock_t ske_keypad_lock;
};
goto err_free_mem_region;
}
+ keypad->pclk = clk_get(&pdev->dev, "apb_pclk");
+ if (IS_ERR(keypad->pclk)) {
+ dev_err(&pdev->dev, "failed to get pclk\n");
+ error = PTR_ERR(keypad->pclk);
+ goto err_iounmap;
+ }
+
keypad->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(keypad->clk)) {
dev_err(&pdev->dev, "failed to get clk\n");
error = PTR_ERR(keypad->clk);
- goto err_iounmap;
+ goto err_pclk;
}
input->id.bustype = BUS_HOST;
keypad->keymap, input);
if (error) {
dev_err(&pdev->dev, "Failed to build keymap\n");
- goto err_iounmap;
+ goto err_clk;
}
input_set_capability(input, EV_MSC, MSC_SCAN);
if (!plat->no_autorepeat)
__set_bit(EV_REP, input->evbit);
- clk_enable(keypad->clk);
+ error = clk_prepare_enable(keypad->pclk);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to prepare/enable pclk\n");
+ goto err_clk;
+ }
+
+ error = clk_prepare_enable(keypad->clk);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to prepare/enable clk\n");
+ goto err_pclk_disable;
+ }
+
/* go through board initialization helpers */
if (keypad->board->init)
err_free_irq:
free_irq(keypad->irq, keypad);
err_clk_disable:
- clk_disable(keypad->clk);
+ clk_disable_unprepare(keypad->clk);
+err_pclk_disable:
+ clk_disable_unprepare(keypad->pclk);
+err_clk:
clk_put(keypad->clk);
+err_pclk:
+ clk_put(keypad->pclk);
err_iounmap:
iounmap(keypad->reg_base);
err_free_mem_region:
input_unregister_device(keypad->input);
- clk_disable(keypad->clk);
+ clk_disable_unprepare(keypad->clk);
clk_put(keypad->clk);
if (keypad->board->exit)
static int __devinit qt2160_write(struct i2c_client *client, u8 reg, u8 data)
{
- int error;
-
- error = i2c_smbus_write_byte(client, reg);
- if (error) {
- dev_err(&client->dev,
- "couldn't send request. Returned %d\n", error);
- return error;
- }
+ int ret;
- error = i2c_smbus_write_byte(client, data);
- if (error) {
+ ret = i2c_smbus_write_byte_data(client, reg, data);
+ if (ret < 0)
dev_err(&client->dev,
- "couldn't write data. Returned %d\n", error);
- return error;
- }
+ "couldn't write data. Returned %d\n", ret);
- return error;
+ return ret;
}
struct spear_kbd {
struct input_dev *input;
- struct resource *res;
void __iomem *io_base;
struct clk *clk;
unsigned int irq;
unsigned int mode;
+ unsigned int suspended_rate;
unsigned short last_key;
unsigned short keycodes[NUM_ROWS * NUM_COLS];
bool rep;
- unsigned int suspended_rate;
+ bool irq_wake_enabled;
u32 mode_ctl_reg;
};
return irq;
}
- kbd = kzalloc(sizeof(*kbd), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!kbd || !input_dev) {
- dev_err(&pdev->dev, "out of memory\n");
- error = -ENOMEM;
- goto err_free_mem;
+ kbd = devm_kzalloc(&pdev->dev, sizeof(*kbd), GFP_KERNEL);
+ if (!kbd) {
+ dev_err(&pdev->dev, "not enough memory for driver data\n");
+ return -ENOMEM;
+ }
+
+ input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!input_dev) {
+ dev_err(&pdev->dev, "unable to allocate input device\n");
+ return -ENOMEM;
}
kbd->input = input_dev;
if (!pdata) {
error = spear_kbd_parse_dt(pdev, kbd);
if (error)
- goto err_free_mem;
+ return error;
} else {
kbd->mode = pdata->mode;
kbd->rep = pdata->rep;
kbd->suspended_rate = pdata->suspended_rate;
}
- kbd->res = request_mem_region(res->start, resource_size(res),
- pdev->name);
- if (!kbd->res) {
- dev_err(&pdev->dev, "keyboard region already claimed\n");
- error = -EBUSY;
- goto err_free_mem;
- }
-
- kbd->io_base = ioremap(res->start, resource_size(res));
+ kbd->io_base = devm_request_and_ioremap(&pdev->dev, res);
if (!kbd->io_base) {
- dev_err(&pdev->dev, "ioremap failed for kbd_region\n");
- error = -ENOMEM;
- goto err_release_mem_region;
+ dev_err(&pdev->dev, "request-ioremap failed for kbd_region\n");
+ return -ENOMEM;
}
- kbd->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(kbd->clk)) {
- error = PTR_ERR(kbd->clk);
- goto err_iounmap;
- }
+ kbd->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(kbd->clk))
+ return PTR_ERR(kbd->clk);
input_dev->name = "Spear Keyboard";
input_dev->phys = "keyboard/input0";
- input_dev->dev.parent = &pdev->dev;
input_dev->id.bustype = BUS_HOST;
input_dev->id.vendor = 0x0001;
input_dev->id.product = 0x0001;
kbd->keycodes, input_dev);
if (error) {
dev_err(&pdev->dev, "Failed to build keymap\n");
- goto err_put_clk;
+ return error;
}
if (kbd->rep)
input_set_drvdata(input_dev, kbd);
- error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd);
+ error = devm_request_irq(&pdev->dev, irq, spear_kbd_interrupt, 0,
+ "keyboard", kbd);
if (error) {
- dev_err(&pdev->dev, "request_irq fail\n");
- goto err_put_clk;
+ dev_err(&pdev->dev, "request_irq failed\n");
+ return error;
}
error = input_register_device(input_dev);
if (error) {
dev_err(&pdev->dev, "Unable to register keyboard device\n");
- goto err_free_irq;
+ return error;
}
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, kbd);
return 0;
-
-err_free_irq:
- free_irq(kbd->irq, kbd);
-err_put_clk:
- clk_put(kbd->clk);
-err_iounmap:
- iounmap(kbd->io_base);
-err_release_mem_region:
- release_mem_region(res->start, resource_size(res));
-err_free_mem:
- input_free_device(input_dev);
- kfree(kbd);
-
- return error;
}
static int __devexit spear_kbd_remove(struct platform_device *pdev)
{
- struct spear_kbd *kbd = platform_get_drvdata(pdev);
-
- free_irq(kbd->irq, kbd);
- input_unregister_device(kbd->input);
- clk_put(kbd->clk);
- iounmap(kbd->io_base);
- release_mem_region(kbd->res->start, resource_size(kbd->res));
- kfree(kbd);
-
device_init_wakeup(&pdev->dev, 0);
platform_set_drvdata(pdev, NULL);
mode_ctl_reg = readl_relaxed(kbd->io_base + MODE_CTL_REG);
if (device_may_wakeup(&pdev->dev)) {
- enable_irq_wake(kbd->irq);
+ if (!enable_irq_wake(kbd->irq))
+ kbd->irq_wake_enabled = true;
/*
* reprogram the keyboard operating frequency as on some
mutex_lock(&input_dev->mutex);
if (device_may_wakeup(&pdev->dev)) {
- disable_irq_wake(kbd->irq);
+ if (kbd->irq_wake_enabled) {
+ kbd->irq_wake_enabled = false;
+ disable_irq_wake(kbd->irq);
+ }
} else {
if (input_dev->users)
clk_enable(kbd->clk);
static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
- struct stmpe_keypad_platform_data *plat;
+ const struct stmpe_keypad_platform_data *plat;
struct stmpe_keypad *keypad;
struct input_dev *input;
- int ret;
+ int error;
int irq;
int i;
if (irq < 0)
return irq;
- keypad = kzalloc(sizeof(struct stmpe_keypad), GFP_KERNEL);
+ keypad = devm_kzalloc(&pdev->dev, sizeof(struct stmpe_keypad),
+ GFP_KERNEL);
if (!keypad)
return -ENOMEM;
- input = input_allocate_device();
- if (!input) {
- ret = -ENOMEM;
- goto out_freekeypad;
- }
+ input = devm_input_allocate_device(&pdev->dev);
+ if (!input)
+ return -ENOMEM;
input->name = "STMPE keypad";
input->id.bustype = BUS_I2C;
input->dev.parent = &pdev->dev;
- ret = matrix_keypad_build_keymap(plat->keymap_data, NULL,
- STMPE_KEYPAD_MAX_ROWS,
- STMPE_KEYPAD_MAX_COLS,
- keypad->keymap, input);
- if (ret)
- goto out_freeinput;
+ error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+ STMPE_KEYPAD_MAX_ROWS,
+ STMPE_KEYPAD_MAX_COLS,
+ keypad->keymap, input);
+ if (error)
+ return error;
input_set_capability(input, EV_MSC, MSC_SCAN);
if (!plat->no_autorepeat)
keypad->input = input;
keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
- ret = stmpe_keypad_chip_init(keypad);
- if (ret < 0)
- goto out_freeinput;
+ error = stmpe_keypad_chip_init(keypad);
+ if (error < 0)
+ return error;
- ret = input_register_device(input);
- if (ret) {
- dev_err(&pdev->dev,
- "unable to register input device: %d\n", ret);
- goto out_freeinput;
+ error = devm_request_threaded_irq(&pdev->dev, irq,
+ NULL, stmpe_keypad_irq,
+ IRQF_ONESHOT, "stmpe-keypad", keypad);
+ if (error) {
+ dev_err(&pdev->dev, "unable to get irq: %d\n", error);
+ return error;
}
- ret = request_threaded_irq(irq, NULL, stmpe_keypad_irq, IRQF_ONESHOT,
- "stmpe-keypad", keypad);
- if (ret) {
- dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
- goto out_unregisterinput;
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev,
+ "unable to register input device: %d\n", error);
+ return error;
}
platform_set_drvdata(pdev, keypad);
return 0;
-
-out_unregisterinput:
- input_unregister_device(input);
- input = NULL;
-out_freeinput:
- input_free_device(input);
-out_freekeypad:
- kfree(keypad);
- return ret;
}
static int __devexit stmpe_keypad_remove(struct platform_device *pdev)
{
struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
- struct stmpe *stmpe = keypad->stmpe;
- int irq = platform_get_irq(pdev, 0);
-
- stmpe_disable(stmpe, STMPE_BLOCK_KEYPAD);
- free_irq(irq, keypad);
- input_unregister_device(keypad->input);
- platform_set_drvdata(pdev, NULL);
- kfree(keypad);
+ stmpe_disable(keypad->stmpe, STMPE_BLOCK_KEYPAD);
return 0;
}
*/
#include <linux/device.h>
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/input.h>
* it will attempt load the keymap from property specified by @keymap_name
* argument (or "linux,keymap" if @keymap_name is %NULL).
*
+ * If @keymap is %NULL the function will automatically allocate managed
+ * block of memory to store the keymap. This memory will be associated with
+ * the parent device and automatically freed when device unbinds from the
+ * driver.
+ *
* Callers are expected to set up input_dev->dev.parent before calling this
* function.
*/
struct input_dev *input_dev)
{
unsigned int row_shift = get_count_order(cols);
+ size_t max_keys = rows << row_shift;
int i;
int error;
+ if (WARN_ON(!input_dev->dev.parent))
+ return -EINVAL;
+
+ if (!keymap) {
+ keymap = devm_kzalloc(input_dev->dev.parent,
+ max_keys * sizeof(*keymap),
+ GFP_KERNEL);
+ if (!keymap) {
+ dev_err(input_dev->dev.parent,
+ "Unable to allocate memory for keymap");
+ return -ENOMEM;
+ }
+ }
+
input_dev->keycode = keymap;
input_dev->keycodesize = sizeof(*keymap);
- input_dev->keycodemax = rows << row_shift;
+ input_dev->keycodemax = max_keys;
__set_bit(EV_KEY, input_dev->evbit);
called ati_remote2.
config INPUT_KEYSPAN_REMOTE
- tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ tristate "Keyspan DMR USB remote control"
depends on USB_ARCH_HAS_HCD
select USB
help
config INPUT_YEALINK
tristate "Yealink usb-p1k voip phone"
- depends on EXPERIMENTAL
depends on USB_ARCH_HAS_HCD
select USB
help
config INPUT_CM109
tristate "C-Media CM109 USB I/O Controller"
- depends on EXPERIMENTAL
depends on USB_ARCH_HAS_HCD
select USB
help
To compile this driver as a module, choose M here: the module will be
called cm109.
+config INPUT_RETU_PWRBUTTON
+ tristate "Retu Power button Driver"
+ depends on MFD_RETU
+ help
+ Say Y here if you want to enable power key reporting via the
+ Retu chips found in Nokia Internet Tablets (770, N800, N810).
+
+ To compile this driver as a module, choose M here. The module will
+ be called retu-pwrbutton.
+
config INPUT_TWL4030_PWRBUTTON
tristate "TWL4030 Power button Driver"
depends on TWL4030_CORE
config INPUT_PCF8574
tristate "PCF8574 Keypad input device"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
help
Say Y here if you want to support a keypad connected via I2C
with a PCF8574.
config INPUT_PWM_BEEPER
tristate "PWM beeper support"
- depends on HAVE_PWM
+ depends on HAVE_PWM || PWM
help
Say Y here to get support for PWM based beeper devices.
To compile this driver as a module, choose M here: the
module will be called da9052_onkey.
+config INPUT_DA9055_ONKEY
+ tristate "Dialog Semiconductor DA9055 ONKEY"
+ depends on MFD_DA9055
+ help
+ Support the ONKEY of DA9055 PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called da9055_onkey.
+
config INPUT_DM355EVM
tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
depends on MFD_DM355EVM_MSP
obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
+obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
+obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
--- /dev/null
+/*
+ * ON pin driver for Dialog DA9055 PMICs
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+
+struct da9055_onkey {
+ struct da9055 *da9055;
+ struct input_dev *input;
+ struct delayed_work work;
+};
+
+static void da9055_onkey_query(struct da9055_onkey *onkey)
+{
+ int key_stat;
+
+ key_stat = da9055_reg_read(onkey->da9055, DA9055_REG_STATUS_A);
+ if (key_stat < 0) {
+ dev_err(onkey->da9055->dev,
+ "Failed to read onkey event %d\n", key_stat);
+ } else {
+ key_stat &= DA9055_NOKEY_STS;
+ /*
+ * Onkey status bit is cleared when onkey button is relased.
+ */
+ if (!key_stat) {
+ input_report_key(onkey->input, KEY_POWER, 0);
+ input_sync(onkey->input);
+ }
+ }
+
+ /*
+ * Interrupt is generated only when the ONKEY pin is asserted.
+ * Hence the deassertion of the pin is simulated through work queue.
+ */
+ if (key_stat)
+ schedule_delayed_work(&onkey->work, msecs_to_jiffies(10));
+
+}
+
+static void da9055_onkey_work(struct work_struct *work)
+{
+ struct da9055_onkey *onkey = container_of(work, struct da9055_onkey,
+ work.work);
+
+ da9055_onkey_query(onkey);
+}
+
+static irqreturn_t da9055_onkey_irq(int irq, void *data)
+{
+ struct da9055_onkey *onkey = data;
+
+ input_report_key(onkey->input, KEY_POWER, 1);
+ input_sync(onkey->input);
+
+ da9055_onkey_query(onkey);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit da9055_onkey_probe(struct platform_device *pdev)
+{
+ struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
+ struct da9055_onkey *onkey;
+ struct input_dev *input_dev;
+ int irq, err;
+
+ irq = platform_get_irq_byname(pdev, "ONKEY");
+ if (irq < 0) {
+ dev_err(&pdev->dev,
+ "Failed to get an IRQ for input device, %d\n", irq);
+ return -EINVAL;
+ }
+
+ onkey = devm_kzalloc(&pdev->dev, sizeof(*onkey), GFP_KERNEL);
+ if (!onkey) {
+ dev_err(&pdev->dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&pdev->dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ onkey->input = input_dev;
+ onkey->da9055 = da9055;
+ input_dev->name = "da9055-onkey";
+ input_dev->phys = "da9055-onkey/input0";
+ input_dev->dev.parent = &pdev->dev;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY);
+ __set_bit(KEY_POWER, input_dev->keybit);
+
+ INIT_DELAYED_WORK(&onkey->work, da9055_onkey_work);
+
+ irq = regmap_irq_get_virq(da9055->irq_data, irq);
+ err = request_threaded_irq(irq, NULL, da9055_onkey_irq,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "ONKEY", onkey);
+ if (err < 0) {
+ dev_err(&pdev->dev,
+ "Failed to register ONKEY IRQ %d, error = %d\n",
+ irq, err);
+ goto err_free_input;
+ }
+
+ err = input_register_device(input_dev);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to register input device, %d\n",
+ err);
+ goto err_free_irq;
+ }
+
+ platform_set_drvdata(pdev, onkey);
+
+ return 0;
+
+err_free_irq:
+ free_irq(irq, onkey);
+ cancel_delayed_work_sync(&onkey->work);
+err_free_input:
+ input_free_device(input_dev);
+
+ return err;
+}
+
+static int __devexit da9055_onkey_remove(struct platform_device *pdev)
+{
+ struct da9055_onkey *onkey = platform_get_drvdata(pdev);
+ int irq = platform_get_irq_byname(pdev, "ONKEY");
+
+ irq = regmap_irq_get_virq(onkey->da9055->irq_data, irq);
+ free_irq(irq, onkey);
+ cancel_delayed_work_sync(&onkey->work);
+ input_unregister_device(onkey->input);
+
+ return 0;
+}
+
+static struct platform_driver da9055_onkey_driver = {
+ .probe = da9055_onkey_probe,
+ .remove = __devexit_p(da9055_onkey_remove),
+ .driver = {
+ .name = "da9055-onkey",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(da9055_onkey_driver);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("Onkey driver for DA9055");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-onkey");
if (!beeper)
return -ENOMEM;
- beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+ beeper->pwm = pwm_get(&pdev->dev, NULL);
+ if (IS_ERR(beeper->pwm)) {
+ dev_dbg(&pdev->dev, "unable to request PWM, trying legacy API\n");
+ beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+ }
if (IS_ERR(beeper->pwm)) {
error = PTR_ERR(beeper->pwm);
#define PWM_BEEPER_PM_OPS NULL
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id pwm_beeper_match[] = {
+ { .compatible = "pwm-beeper", },
+ { },
+};
+#endif
+
static struct platform_driver pwm_beeper_driver = {
.probe = pwm_beeper_probe,
.remove = __devexit_p(pwm_beeper_remove),
.name = "pwm-beeper",
.owner = THIS_MODULE,
.pm = PWM_BEEPER_PM_OPS,
+ .of_match_table = of_match_ptr(pwm_beeper_match),
},
};
module_platform_driver(pwm_beeper_driver);
--- /dev/null
+/*
+ * Retu power button driver.
+ *
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Original code written by Ari Saastamoinen, Juha Yrjölä and Felipe Balbi.
+ * Rewritten by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/retu.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#define RETU_STATUS_PWRONX (1 << 5)
+
+static irqreturn_t retu_pwrbutton_irq(int irq, void *_pwr)
+{
+ struct input_dev *idev = _pwr;
+ struct retu_dev *rdev = input_get_drvdata(idev);
+ bool state;
+
+ state = !(retu_read(rdev, RETU_REG_STATUS) & RETU_STATUS_PWRONX);
+ input_report_key(idev, KEY_POWER, state);
+ input_sync(idev);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit retu_pwrbutton_probe(struct platform_device *pdev)
+{
+ struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
+ struct input_dev *idev;
+ int irq;
+ int error;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ idev = devm_input_allocate_device(&pdev->dev);
+ if (!idev)
+ return -ENOMEM;
+
+ idev->name = "retu-pwrbutton";
+ idev->dev.parent = &pdev->dev;
+
+ input_set_capability(idev, EV_KEY, KEY_POWER);
+ input_set_drvdata(idev, rdev);
+
+ error = devm_request_threaded_irq(&pdev->dev, irq,
+ NULL, retu_pwrbutton_irq, 0,
+ "retu-pwrbutton", idev);
+ if (error)
+ return error;
+
+ error = input_register_device(idev);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static int __devexit retu_pwrbutton_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver retu_pwrbutton_driver = {
+ .probe = retu_pwrbutton_probe,
+ .remove = __devexit_p(retu_pwrbutton_remove),
+ .driver = {
+ .name = "retu-pwrbutton",
+ .owner = THIS_MODULE,
+ },
+};
+module_platform_driver(retu_pwrbutton_driver);
+
+MODULE_ALIAS("platform:retu-pwrbutton");
+MODULE_DESCRIPTION("Retu Power Button");
+MODULE_AUTHOR("Ari Saastamoinen");
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
+MODULE_LICENSE("GPL");
int irq = wm831x_irq(wm831x, platform_get_irq(pdev, 0));
int ret;
- wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL);
+ wm831x_on = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_on),
+ GFP_KERNEL);
if (!wm831x_on) {
dev_err(&pdev->dev, "Can't allocate data\n");
return -ENOMEM;
err_input_dev:
input_free_device(wm831x_on->dev);
err:
- kfree(wm831x_on);
return ret;
}
free_irq(irq, wm831x_on);
cancel_delayed_work_sync(&wm831x_on->work);
input_unregister_device(wm831x_on->dev);
- kfree(wm831x_on);
return 0;
}
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateInitWait:
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
psmouse->packet[5]) & 0x80) ||
(!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
psmouse_dbg(psmouse,
- "refusing packet %x %x %x %x (suspected interleaved ps/2)\n",
- psmouse->packet[3], psmouse->packet[4],
- psmouse->packet[5], psmouse->packet[6]);
+ "refusing packet %4ph (suspected interleaved ps/2)\n",
+ psmouse->packet + 3);
return PSMOUSE_BAD_DATA;
}
psmouse->packet[4] |
psmouse->packet[5]) & 0x80) {
psmouse_dbg(psmouse,
- "refusing packet %x %x %x (suspected interleaved ps/2)\n",
- psmouse->packet[3], psmouse->packet[4],
- psmouse->packet[5]);
+ "refusing packet %3ph (suspected interleaved ps/2)\n",
+ psmouse->packet + 3);
} else {
alps_process_packet(psmouse);
}
#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
+/* MacbookPro10,2 (unibody, October 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI 0x0259
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO 0x025a
+#define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS 0x025b
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+ /* MacbookPro10,2 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
/* Terminating entry */
{}
};
{ SN_COORD, -150, 6730 },
{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { SN_PRESSURE, 0, 300 },
+ { SN_WIDTH, 0, 2048 },
+ { SN_COORD, -4750, 5280 },
+ { SN_COORD, -150, 6730 },
+ { SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
+ },
{}
};
To compile this driver as a module, choose M here: the
module will be called ps2mult.
+config SERIO_ARC_PS2
+ tristate "ARC PS/2 support"
+ help
+ Say Y here if you have an ARC FPGA platform with a PS/2
+ controller in it.
+
+ To compile this driver as a module, choose M here; the module
+ will be called arc_ps2.
+
endif
obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o
obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o
obj-$(CONFIG_SERIO_ALTERA_PS2) += altera_ps2.o
+obj-$(CONFIG_SERIO_ARC_PS2) += arc_ps2.o
--- /dev/null
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Driver is originally developed by Pavel Sokolov <psokolov@synopsys.com>
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#define ARC_PS2_PORTS 2
+
+#define ARC_ARC_PS2_ID 0x0001f609
+
+#define STAT_TIMEOUT 128
+
+#define PS2_STAT_RX_FRM_ERR (1)
+#define PS2_STAT_RX_BUF_OVER (1 << 1)
+#define PS2_STAT_RX_INT_EN (1 << 2)
+#define PS2_STAT_RX_VAL (1 << 3)
+#define PS2_STAT_TX_ISNOT_FUL (1 << 4)
+#define PS2_STAT_TX_INT_EN (1 << 5)
+
+struct arc_ps2_port {
+ void __iomem *data_addr;
+ void __iomem *status_addr;
+ struct serio *io;
+};
+
+struct arc_ps2_data {
+ struct arc_ps2_port port[ARC_PS2_PORTS];
+ void __iomem *addr;
+ unsigned int frame_error;
+ unsigned int buf_overflow;
+ unsigned int total_int;
+};
+
+static void arc_ps2_check_rx(struct arc_ps2_data *arc_ps2,
+ struct arc_ps2_port *port)
+{
+ unsigned int timeout = 1000;
+ unsigned int flag, status;
+ unsigned char data;
+
+ do {
+ status = ioread32(port->status_addr);
+ if (!(status & PS2_STAT_RX_VAL))
+ return;
+
+ data = ioread32(port->data_addr) & 0xff;
+
+ flag = 0;
+ arc_ps2->total_int++;
+ if (status & PS2_STAT_RX_FRM_ERR) {
+ arc_ps2->frame_error++;
+ flag |= SERIO_PARITY;
+ } else if (status & PS2_STAT_RX_BUF_OVER) {
+ arc_ps2->buf_overflow++;
+ flag |= SERIO_FRAME;
+ }
+
+ serio_interrupt(port->io, data, flag);
+ } while (--timeout);
+
+ dev_err(&port->io->dev, "PS/2 hardware stuck\n");
+}
+
+static irqreturn_t arc_ps2_interrupt(int irq, void *dev)
+{
+ struct arc_ps2_data *arc_ps2 = dev;
+ int i;
+
+ for (i = 0; i < ARC_PS2_PORTS; i++)
+ arc_ps2_check_rx(arc_ps2, &arc_ps2->port[i]);
+
+ return IRQ_HANDLED;
+}
+
+static int arc_ps2_write(struct serio *io, unsigned char val)
+{
+ unsigned status;
+ struct arc_ps2_port *port = io->port_data;
+ int timeout = STAT_TIMEOUT;
+
+ do {
+ status = ioread32(port->status_addr);
+ cpu_relax();
+
+ if (status & PS2_STAT_TX_ISNOT_FUL) {
+ iowrite32(val & 0xff, port->data_addr);
+ return 0;
+ }
+
+ } while (--timeout);
+
+ dev_err(&io->dev, "write timeout\n");
+ return -ETIMEDOUT;
+}
+
+static int arc_ps2_open(struct serio *io)
+{
+ struct arc_ps2_port *port = io->port_data;
+
+ iowrite32(PS2_STAT_RX_INT_EN, port->status_addr);
+
+ return 0;
+}
+
+static void arc_ps2_close(struct serio *io)
+{
+ struct arc_ps2_port *port = io->port_data;
+
+ iowrite32(ioread32(port->status_addr) & ~PS2_STAT_RX_INT_EN,
+ port->status_addr);
+}
+
+static void __iomem * __devinit arc_ps2_calc_addr(struct arc_ps2_data *arc_ps2,
+ int index, bool status)
+{
+ void __iomem *addr;
+
+ addr = arc_ps2->addr + 4 + 4 * index;
+ if (status)
+ addr += ARC_PS2_PORTS * 4;
+
+ return addr;
+}
+
+static void __devinit arc_ps2_inhibit_ports(struct arc_ps2_data *arc_ps2)
+{
+ void __iomem *addr;
+ u32 val;
+ int i;
+
+ for (i = 0; i < ARC_PS2_PORTS; i++) {
+ addr = arc_ps2_calc_addr(arc_ps2, i, true);
+ val = ioread32(addr);
+ val &= ~(PS2_STAT_RX_INT_EN | PS2_STAT_TX_INT_EN);
+ iowrite32(val, addr);
+ }
+}
+
+static int __devinit arc_ps2_create_port(struct platform_device *pdev,
+ struct arc_ps2_data *arc_ps2,
+ int index)
+{
+ struct arc_ps2_port *port = &arc_ps2->port[index];
+ struct serio *io;
+
+ io = kzalloc(sizeof(struct serio), GFP_KERNEL);
+ if (!io)
+ return -ENOMEM;
+
+ io->id.type = SERIO_8042;
+ io->write = arc_ps2_write;
+ io->open = arc_ps2_open;
+ io->close = arc_ps2_close;
+ snprintf(io->name, sizeof(io->name), "ARC PS/2 port%d", index);
+ snprintf(io->phys, sizeof(io->phys), "arc/serio%d", index);
+ io->port_data = port;
+
+ port->io = io;
+
+ port->data_addr = arc_ps2_calc_addr(arc_ps2, index, false);
+ port->status_addr = arc_ps2_calc_addr(arc_ps2, index, true);
+
+ dev_dbg(&pdev->dev, "port%d is allocated (data = 0x%p, status = 0x%p)\n",
+ index, port->data_addr, port->status_addr);
+
+ serio_register_port(port->io);
+ return 0;
+}
+
+static int __devinit arc_ps2_probe(struct platform_device *pdev)
+{
+ struct arc_ps2_data *arc_ps2;
+ struct resource *res;
+ int irq;
+ int error, id, i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no IO memory defined\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq_byname(pdev, "arc_ps2_irq");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no IRQ defined\n");
+ return -EINVAL;
+ }
+
+ arc_ps2 = devm_kzalloc(&pdev->dev, sizeof(struct arc_ps2_data),
+ GFP_KERNEL);
+ if (!arc_ps2) {
+ dev_err(&pdev->dev, "out of memory\n");
+ return -ENOMEM;
+ }
+
+ arc_ps2->addr = devm_request_and_ioremap(&pdev->dev, res);
+ if (!arc_ps2->addr)
+ return -EBUSY;
+
+ dev_info(&pdev->dev, "irq = %d, address = 0x%p, ports = %i\n",
+ irq, arc_ps2->addr, ARC_PS2_PORTS);
+
+ id = ioread32(arc_ps2->addr);
+ if (id != ARC_ARC_PS2_ID) {
+ dev_err(&pdev->dev, "device id does not match\n");
+ return -ENXIO;
+ }
+
+ arc_ps2_inhibit_ports(arc_ps2);
+
+ error = devm_request_irq(&pdev->dev, irq, arc_ps2_interrupt,
+ 0, "arc_ps2", arc_ps2);
+ if (error) {
+ dev_err(&pdev->dev, "Could not allocate IRQ\n");
+ return error;
+ }
+
+ for (i = 0; i < ARC_PS2_PORTS; i++) {
+ error = arc_ps2_create_port(pdev, arc_ps2, i);
+ if (error) {
+ while (--i >= 0)
+ serio_unregister_port(arc_ps2->port[i].io);
+ return error;
+ }
+ }
+
+ platform_set_drvdata(pdev, arc_ps2);
+
+ return 0;
+}
+
+static int __devexit arc_ps2_remove(struct platform_device *pdev)
+{
+ struct arc_ps2_data *arc_ps2 = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < ARC_PS2_PORTS; i++)
+ serio_unregister_port(arc_ps2->port[i].io);
+
+ dev_dbg(&pdev->dev, "interrupt count = %i\n", arc_ps2->total_int);
+ dev_dbg(&pdev->dev, "frame error count = %i\n", arc_ps2->frame_error);
+ dev_dbg(&pdev->dev, "buffer overflow count = %i\n",
+ arc_ps2->buf_overflow);
+
+ return 0;
+}
+
+static struct platform_driver arc_ps2_driver = {
+ .driver = {
+ .name = "arc_ps2",
+ .owner = THIS_MODULE,
+ },
+ .probe = arc_ps2_probe,
+ .remove = __devexit_p(arc_ps2_remove),
+};
+
+module_platform_driver(arc_ps2_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Pavel Sokolov <psokolov@synopsys.com>");
+MODULE_DESCRIPTION("ARC PS/2 Driver");
write_lock_irqsave(&mlc->lock, flags);
pack = node->object.packet;
out:
- if (mlc->istarted)
- goto out2;
- /* Prepare to receive input */
- if ((node + 1)->act & HILSE_IN)
- hilse_setup_input(mlc, node + 1);
+ if (!mlc->istarted) {
+ /* Prepare to receive input */
+ if ((node + 1)->act & HILSE_IN)
+ hilse_setup_input(mlc, node + 1);
+ }
- out2:
write_unlock_irqrestore(&mlc->lock, flags);
if (down_trylock(&mlc->osem)) {
if (check_legacy_ioport(I8042_DATA_REG))
return -ENODEV;
#endif
-#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__)
+#if !defined(__sh__) && !defined(__alpha__)
if (!request_region(I8042_DATA_REG, 16, "i8042"))
return -EBUSY;
#endif
if (usage == WCM_DESKTOP) {
if (finger) {
features->device_type = BTN_TOOL_FINGER;
- if (features->type == TABLETPC2FG) {
- /* need to reset back */
+
+ switch (features->type) {
+ case TABLETPC2FG:
features->pktlen = WACOM_PKGLEN_TPC2FG;
- }
+ break;
- if (features->type == MTSCREEN || features->type == WACOM_24HDT)
+ case MTSCREEN:
+ case WACOM_24HDT:
features->pktlen = WACOM_PKGLEN_MTOUCH;
+ break;
- if (features->type == BAMBOO_PT) {
- /* need to reset back */
+ case MTTPC:
+ features->pktlen = WACOM_PKGLEN_MTTPC;
+ break;
+
+ case BAMBOO_PT:
features->pktlen = WACOM_PKGLEN_BBTOUCH;
+ break;
+
+ default:
+ features->pktlen = WACOM_PKGLEN_GRAPHIRE;
+ break;
+ }
+
+ switch (features->type) {
+ case BAMBOO_PT:
features->x_phy =
get_unaligned_le16(&report[i + 5]);
features->x_max =
get_unaligned_le16(&report[i + 8]);
i += 15;
- } else if (features->type == WACOM_24HDT) {
+ break;
+
+ case WACOM_24HDT:
features->x_max =
get_unaligned_le16(&report[i + 3]);
features->x_phy =
features->unit = report[i - 1];
features->unitExpo = report[i - 3];
i += 12;
- } else {
+ break;
+
+ default:
features->x_max =
get_unaligned_le16(&report[i + 3]);
features->x_phy =
features->unit = report[i + 9];
features->unitExpo = report[i + 11];
i += 12;
+ break;
}
} else if (pen) {
/* penabled only accepts exact bytes of data */
- if (features->type == TABLETPC2FG)
+ if (features->type >= TABLETPC)
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
features->device_type = BTN_TOOL_PEN;
features->x_max =
case HID_USAGE_Y:
if (usage == WCM_DESKTOP) {
if (finger) {
- int type = features->type;
-
- if (type == TABLETPC2FG || type == MTSCREEN) {
+ switch (features->type) {
+ case TABLETPC2FG:
+ case MTSCREEN:
+ case MTTPC:
features->y_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
get_unaligned_le16(&report[i + 6]);
i += 7;
- } else if (type == WACOM_24HDT) {
+ break;
+
+ case WACOM_24HDT:
features->y_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
get_unaligned_le16(&report[i - 2]);
i += 7;
- } else if (type == BAMBOO_PT) {
+ break;
+
+ case BAMBOO_PT:
features->y_phy =
get_unaligned_le16(&report[i + 3]);
features->y_max =
get_unaligned_le16(&report[i + 6]);
i += 12;
- } else {
+ break;
+
+ default:
features->y_max =
features->x_max;
features->y_phy =
get_unaligned_le16(&report[i + 3]);
i += 4;
+ break;
}
} else if (pen) {
features->y_max =
/* general pen packet */
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
- if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
- (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
- (features->type >= WACOM_21UX2 && features->type <= WACOM_24HD)) {
+ if (features->type >= INTUOS4S && features->type <= WACOM_24HD) {
t = (t << 1) | (data[1] & 1);
}
input_report_abs(input, ABS_PRESSURE, t);
int i;
int current_num_contacts = data[2];
int contacts_to_send = 0;
+ int x_offset = 0;
+
+ /* MTTPC does not support Height and Width */
+ if (wacom->features.type == MTTPC)
+ x_offset = -4;
/*
* First packet resets the counter since only the first
contacts_to_send = min(5, wacom->num_contacts_left);
for (i = 0; i < contacts_to_send; i++) {
- int offset = (WACOM_BYTES_PER_MT_PACKET * i) + 3;
+ int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3;
bool touch = data[offset] & 0x1;
int id = le16_to_cpup((__le16 *)&data[offset + 1]);
int slot = find_slot_from_contactid(wacom, id);
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
- int x = le16_to_cpup((__le16 *)&data[offset + 7]);
- int y = le16_to_cpup((__le16 *)&data[offset + 9]);
+ int x = le16_to_cpup((__le16 *)&data[offset + x_offset + 7]);
+ int y = le16_to_cpup((__le16 *)&data[offset + x_offset + 9]);
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
case TABLETPCE:
case TABLETPC2FG:
case MTSCREEN:
+ case MTTPC:
sync = wacom_tpc_irq(wacom_wac, len);
break;
/* fall through */
case MTSCREEN:
+ case MTTPC:
if (features->device_type == BTN_TOOL_FINGER) {
wacom_wac->slots = kmalloc(features->touch_max *
sizeof(int),
static const struct wacom_features wacom_features_0xEF =
{ "Wacom ISDv4 EF", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x100 =
+ { "Wacom ISDv4 100", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x101 =
+ { "Wacom ISDv4 101", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x4001 =
+ { "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255,
+ 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x47 =
{ "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023,
31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
{ USB_DEVICE_WACOM(0xEC) },
{ USB_DEVICE_WACOM(0xED) },
{ USB_DEVICE_WACOM(0xEF) },
+ { USB_DEVICE_WACOM(0x100) },
+ { USB_DEVICE_WACOM(0x101) },
+ { USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_WACOM(0xF8) },
#define WACOM_PKGLEN_BBPEN 10
#define WACOM_PKGLEN_WIRELESS 32
#define WACOM_PKGLEN_MTOUCH 62
+#define WACOM_PKGLEN_MTTPC 40
/* wacom data size per MT contact */
#define WACOM_BYTES_PER_MT_PACKET 11
TABLETPCE,
TABLETPC2FG,
MTSCREEN,
+ MTTPC,
MAX_TYPE
};
int ret;
struct i2c_msg msg[2] = {
/* first write slave position to i2c devices */
- { client->addr, 0, 1, &cmd },
+ {
+ .addr = client->addr,
+ .len = 1,
+ .buf = &cmd
+ },
/* Second read data from position */
- { client->addr, I2C_M_RD, len, data }
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = data
+ }
};
ret = i2c_transfer(client->adapter, msg, 2);
DEFINE_SIMPLE_ATTRIBUTE(debugfs_mode_fops, edt_ft5x06_debugfs_mode_get,
edt_ft5x06_debugfs_mode_set, "%llu\n");
-static int edt_ft5x06_debugfs_raw_data_open(struct inode *inode,
- struct file *file)
-{
- file->private_data = inode->i_private;
-
- return 0;
-}
-
static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file,
char __user *buf, size_t count, loff_t *off)
{
static const struct file_operations debugfs_raw_data_fops = {
- .open = edt_ft5x06_debugfs_raw_data_open,
+ .open = simple_open,
.read = edt_ft5x06_debugfs_raw_data_read,
};
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/of.h>
#include <linux/i2c.h>
#include <linux/i2c/mms114.h>
#include <linux/input/mt.h>
mms114_stop(data);
}
+#ifdef CONFIG_OF
+static struct mms114_platform_data * __devinit mms114_parse_dt(struct device *dev)
+{
+ struct mms114_platform_data *pdata;
+ struct device_node *np = dev->of_node;
+
+ if (!np)
+ return NULL;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "failed to allocate platform data\n");
+ return NULL;
+ }
+
+ if (of_property_read_u32(np, "x-size", &pdata->x_size)) {
+ dev_err(dev, "failed to get x-size property\n");
+ return NULL;
+ };
+
+ if (of_property_read_u32(np, "y-size", &pdata->y_size)) {
+ dev_err(dev, "failed to get y-size property\n");
+ return NULL;
+ };
+
+ of_property_read_u32(np, "contact-threshold",
+ &pdata->contact_threshold);
+ of_property_read_u32(np, "moving-threshold",
+ &pdata->moving_threshold);
+
+ if (of_find_property(np, "x-invert", NULL))
+ pdata->x_invert = true;
+ if (of_find_property(np, "y-invert", NULL))
+ pdata->y_invert = true;
+
+ return pdata;
+}
+#else
+static inline struct mms114_platform_data *mms114_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int __devinit mms114_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ const struct mms114_platform_data *pdata;
struct mms114_data *data;
struct input_dev *input_dev;
int error;
- if (!client->dev.platform_data) {
+ pdata = dev_get_platdata(&client->dev);
+ if (!pdata)
+ pdata = mms114_parse_dt(&client->dev);
+
+ if (!pdata) {
dev_err(&client->dev, "Need platform data\n");
return -EINVAL;
}
data->client = client;
data->input_dev = input_dev;
- data->pdata = client->dev.platform_data;
+ data->pdata = pdata;
input_dev->name = "MELPAS MMS114 Touchscreen";
input_dev->id.bustype = BUS_I2C;
};
MODULE_DEVICE_TABLE(i2c, mms114_id);
+#ifdef CONFIG_OF
+static struct of_device_id __devinitdata mms114_dt_match[] = {
+ { .compatible = "melfas,mms114" },
+ { }
+};
+#endif
+
static struct i2c_driver mms114_driver = {
.driver = {
.name = "mms114",
.owner = THIS_MODULE,
.pm = &mms114_pm_ops,
+ .of_match_table = of_match_ptr(mms114_dt_match),
},
.probe = mms114_probe,
.remove = __devexit_p(mms114_remove),
-/* STMicroelectronics STMPE811 Touchscreen Driver
+/*
+ * STMicroelectronics STMPE811 Touchscreen Driver
*
* (C) 2010 Luotao Fu <l.fu@pengutronix.de>
* All rights reserved.
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/slab.h>
STMPE_TSC_CTRL_TSC_EN, 0);
}
-static int __devinit stmpe_input_probe(struct platform_device *pdev)
+static void stmpe_ts_get_platform_info(struct platform_device *pdev,
+ struct stmpe_touch *ts)
{
struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
- struct stmpe_platform_data *pdata = stmpe->pdata;
- struct stmpe_touch *ts;
- struct input_dev *idev;
+ struct device_node *np = pdev->dev.of_node;
struct stmpe_ts_platform_data *ts_pdata = NULL;
- int ret;
- int ts_irq;
-
- ts_irq = platform_get_irq_byname(pdev, "FIFO_TH");
- if (ts_irq < 0)
- return ts_irq;
-
- ts = kzalloc(sizeof(*ts), GFP_KERNEL);
- if (!ts) {
- ret = -ENOMEM;
- goto err_out;
- }
- idev = input_allocate_device();
- if (!idev) {
- ret = -ENOMEM;
- goto err_free_ts;
- }
-
- platform_set_drvdata(pdev, ts);
ts->stmpe = stmpe;
- ts->idev = idev;
- ts->dev = &pdev->dev;
- if (pdata)
- ts_pdata = pdata->ts;
+ if (stmpe->pdata && stmpe->pdata->ts) {
+ ts_pdata = stmpe->pdata->ts;
- if (ts_pdata) {
ts->sample_time = ts_pdata->sample_time;
ts->mod_12b = ts_pdata->mod_12b;
ts->ref_sel = ts_pdata->ref_sel;
ts->settling = ts_pdata->settling;
ts->fraction_z = ts_pdata->fraction_z;
ts->i_drive = ts_pdata->i_drive;
+ } else if (np) {
+ u32 val;
+
+ if (!of_property_read_u32(np, "st,sample-time", &val))
+ ts->sample_time = val;
+ if (!of_property_read_u32(np, "st,mod-12b", &val))
+ ts->mod_12b = val;
+ if (!of_property_read_u32(np, "st,ref-sel", &val))
+ ts->ref_sel = val;
+ if (!of_property_read_u32(np, "st,adc-freq", &val))
+ ts->adc_freq = val;
+ if (!of_property_read_u32(np, "st,ave-ctrl", &val))
+ ts->ave_ctrl = val;
+ if (!of_property_read_u32(np, "st,touch-det-delay", &val))
+ ts->touch_det_delay = val;
+ if (!of_property_read_u32(np, "st,settling", &val))
+ ts->settling = val;
+ if (!of_property_read_u32(np, "st,fraction-z", &val))
+ ts->fraction_z = val;
+ if (!of_property_read_u32(np, "st,i-drive", &val))
+ ts->i_drive = val;
}
+}
+
+static int __devinit stmpe_input_probe(struct platform_device *pdev)
+{
+ struct stmpe_touch *ts;
+ struct input_dev *idev;
+ int error;
+ int ts_irq;
+
+ ts_irq = platform_get_irq_byname(pdev, "FIFO_TH");
+ if (ts_irq < 0)
+ return ts_irq;
+
+ ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ idev = devm_input_allocate_device(&pdev->dev);
+ if (!idev)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ts);
+ ts->idev = idev;
+ ts->dev = &pdev->dev;
+
+ stmpe_ts_get_platform_info(pdev, ts);
INIT_DELAYED_WORK(&ts->work, stmpe_work);
- ret = request_threaded_irq(ts_irq, NULL, stmpe_ts_handler,
- IRQF_ONESHOT, STMPE_TS_NAME, ts);
- if (ret) {
+ error = devm_request_threaded_irq(&pdev->dev, ts_irq,
+ NULL, stmpe_ts_handler,
+ IRQF_ONESHOT, STMPE_TS_NAME, ts);
+ if (error) {
dev_err(&pdev->dev, "Failed to request IRQ %d\n", ts_irq);
- goto err_free_input;
+ return error;
}
- ret = stmpe_init_hw(ts);
- if (ret)
- goto err_free_irq;
+ error = stmpe_init_hw(ts);
+ if (error)
+ return error;
idev->name = STMPE_TS_NAME;
+ idev->phys = STMPE_TS_NAME"/input0";
idev->id.bustype = BUS_I2C;
idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0);
input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0);
- ret = input_register_device(idev);
- if (ret) {
+ error = input_register_device(idev);
+ if (error) {
dev_err(&pdev->dev, "Could not register input device\n");
- goto err_free_irq;
+ return error;
}
- return ret;
-
-err_free_irq:
- free_irq(ts_irq, ts);
-err_free_input:
- input_free_device(idev);
- platform_set_drvdata(pdev, NULL);
-err_free_ts:
- kfree(ts);
-err_out:
- return ret;
+ return 0;
}
static int __devexit stmpe_ts_remove(struct platform_device *pdev)
{
struct stmpe_touch *ts = platform_get_drvdata(pdev);
- unsigned int ts_irq = platform_get_irq_byname(pdev, "FIFO_TH");
stmpe_disable(ts->stmpe, STMPE_BLOCK_TOUCHSCREEN);
- free_irq(ts_irq, ts);
-
- platform_set_drvdata(pdev, NULL);
-
- input_unregister_device(ts->idev);
-
- kfree(ts);
-
return 0;
}
if (core_pdata)
pdata = core_pdata->touch;
- wm831x_ts = kzalloc(sizeof(struct wm831x_ts), GFP_KERNEL);
+ wm831x_ts = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_ts),
+ GFP_KERNEL);
input_dev = input_allocate_device();
if (!wm831x_ts || !input_dev) {
error = -ENOMEM;
free_irq(wm831x_ts->data_irq, wm831x_ts);
err_alloc:
input_free_device(input_dev);
- kfree(wm831x_ts);
return error;
}
free_irq(wm831x_ts->pd_irq, wm831x_ts);
free_irq(wm831x_ts->data_irq, wm831x_ts);
input_unregister_device(wm831x_ts->input_dev);
- kfree(wm831x_ts);
- platform_set_drvdata(pdev, NULL);
return 0;
}
}
conf->nfaults = 0;
- rdev_for_each(rdev, mddev)
+ rdev_for_each(rdev, mddev) {
conf->rdev = rdev;
+ disk_stack_limits(mddev->gendisk, rdev->bdev,
+ rdev->data_offset << 9);
+ }
md_set_array_sectors(mddev, faulty_size(mddev, 0, 0));
mddev->private = conf;
|| disk_idx < 0)
continue;
if (test_bit(Replacement, &rdev->flags))
- disk = conf->mirrors + conf->raid_disks + disk_idx;
+ disk = conf->mirrors + mddev->raid_disks + disk_idx;
else
disk = conf->mirrors + disk_idx;
clear_bit(Unmerged, &rdev->flags);
}
md_integrity_add_rdev(rdev, mddev);
- if (blk_queue_discard(bdev_get_queue(rdev->bdev)))
+ if (mddev->queue && blk_queue_discard(bdev_get_queue(rdev->bdev)))
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
print_conf(conf);
discard_supported = true;
}
- if (discard_supported)
- queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
- else
- queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, mddev->queue);
-
+ if (mddev->queue) {
+ if (discard_supported)
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
+ else
+ queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD,
+ mddev->queue);
+ }
/* need to check that every block has at least one working mirror */
if (!enough(conf, -1)) {
printk(KERN_ERR "md/raid10:%s: not enough operational mirrors.\n",
static struct mfd_cell stmpe_ts_cell = {
.name = "stmpe-ts",
+ .of_compatible = "st,stmpe-ts",
.resources = stmpe_ts_resources,
.num_resources = ARRAY_SIZE(stmpe_ts_resources),
};
goto out;
}
- sscanf(buf, "%16s", ifname); /* IFNAMSIZ */
+ sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
/* check to see if we are clearing primary */
if (!strlen(ifname) || buf[0] == '\n') {
goto out;
}
- sscanf(buf, "%16s", ifname); /* IFNAMSIZ */
+ sscanf(buf, "%15s", ifname); /* IFNAMSIZ */
/* check to see if we are clearing active */
if (!strlen(ifname) || buf[0] == '\n') {
#define LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD
#define LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD
-
+#define LINK_UPDATE_MASK \
+ (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \
+ LINK_STATUS_LINK_UP | \
+ LINK_STATUS_PHYSICAL_LINK_FLAG | \
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \
+ LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \
+ LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \
+ LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \
+ LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \
+ LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
#define SFP_EEPROM_CON_TYPE_ADDR 0x2
#define SFP_EEPROM_CON_TYPE_VAL_LC 0x7
DEFAULT_PHY_DEV_ADDR);
}
+static void bnx2x_xgxs_specific_func(struct bnx2x_phy *phy,
+ struct link_params *params,
+ u32 action)
+{
+ struct bnx2x *bp = params->bp;
+ switch (action) {
+ case PHY_INIT:
+ /* Set correct devad */
+ REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + params->port*0x18, 0);
+ REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port*0x18,
+ phy->def_md_devad);
+ break;
+ }
+}
+
static void bnx2x_xgxs_deassert(struct link_params *params)
{
struct bnx2x *bp = params->bp;
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val);
udelay(500);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val);
-
- REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_ST + port*0x18, 0);
- REG_WR(bp, NIG_REG_XGXS0_CTRL_MD_DEVAD + port*0x18,
- params->phy[INT_PHY].def_md_devad);
+ bnx2x_xgxs_specific_func(¶ms->phy[INT_PHY], params,
+ PHY_INIT);
}
static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy,
static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars) {
- u16 val16 = 0, lane, i;
+ u16 lane, i, cl72_ctrl, an_adv = 0;
+ u16 ucode_ver;
struct bnx2x *bp = params->bp;
static struct bnx2x_reg_set reg_set[] = {
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
- {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
- {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, 0},
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0xff},
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0x5555},
{MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415},
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190},
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl);
+ cl72_ctrl &= 0xf8ff;
+ cl72_ctrl |= 0x3800;
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl);
+
/* Check adding advertisement for 1G KX */
if (((vars->line_speed == SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) ||
(vars->line_speed == SPEED_1000)) {
u32 addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2;
- val16 |= (1<<5);
+ an_adv |= (1<<5);
/* Enable CL37 1G Parallel Detect */
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD, addr, 0x1);
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
(vars->line_speed == SPEED_10000)) {
/* Check adding advertisement for 10G KR */
- val16 |= (1<<7);
+ an_adv |= (1<<7);
/* Enable 10G Parallel Detect */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
-
+ bnx2x_set_aer_mmd(params, phy);
DP(NETIF_MSG_LINK, "Advertize 10G\n");
}
/* Advertised speeds */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
- MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
+ MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv);
/* Advertised and set FEC (Forward Error Correction) */
bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
/* Set KR Autoneg Work-Around flag for Warpcore version older than D108
*/
bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_UC_INFO_B1_VERSION, &val16);
- if (val16 < 0xd108) {
- DP(NETIF_MSG_LINK, "Enable AN KR work-around\n");
+ MDIO_WC_REG_UC_INFO_B1_VERSION, &ucode_ver);
+ if (ucode_ver < 0xd108) {
+ DP(NETIF_MSG_LINK, "Enable AN KR work-around. WC ver:0x%x\n",
+ ucode_ver);
vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
}
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u16 i;
+ u16 val16, i, lane;
static struct bnx2x_reg_set reg_set[] = {
/* Disable Autoneg */
{MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7},
- {MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 0},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
0x3f00},
{MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0},
{MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1},
{MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa},
- /* Disable CL36 PCS Tx */
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL0, 0x0},
- /* Double Wide Single Data Rate @ pll rate */
- {MDIO_WC_DEVAD, MDIO_WC_REG_XGXSBLK1_LANECTRL1, 0xFFFF},
/* Leave cl72 training enable, needed for KR */
{MDIO_PMA_DEVAD,
MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150,
bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
- /* Leave CL72 enabled */
- bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
- MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL,
- 0x3800);
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ /* Global registers */
+ CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK,
+ MDIO_AER_BLOCK_AER_REG, 0);
+ /* Disable CL36 PCS Tx */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+ val16 &= ~(0x0011 << lane);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+ val16 |= (0x0303 << (lane << 1));
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
/* Set speed via PMA/PMD register */
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD,
MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040);
struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u16 val16;
+ u16 val16, lane;
bnx2x_sfp_e3_set_transmitter(params, phy, 0);
bnx2x_set_mdio_clk(bp, params->chip_id, params->port);
bnx2x_set_aer_mmd(params, phy);
MDIO_WC_REG_XGXSBLK1_LANECTRL2,
val16 & 0xff00);
+ lane = bnx2x_get_warpcore_lane(phy, params);
+ /* Disable CL36 PCS Tx */
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16);
+ val16 |= (0x11 << lane);
+ if (phy->flags & FLAGS_WC_DUAL_MODE)
+ val16 |= (0x22 << lane);
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16);
+
+ bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16);
+ val16 &= ~(0x0303 << (lane << 1));
+ val16 |= (0x0101 << (lane << 1));
+ if (phy->flags & FLAGS_WC_DUAL_MODE) {
+ val16 &= ~(0x0c0c << (lane << 1));
+ val16 |= (0x0404 << (lane << 1));
+ }
+
+ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
+ MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16);
+ /* Restore AER */
+ bnx2x_set_aer_mmd(params, phy);
+
}
static void bnx2x_set_warpcore_loopback(struct bnx2x_phy *phy,
vars->mac_type = MAC_TYPE_NONE;
/* Update shared memory */
- vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
- LINK_STATUS_LINK_UP |
- LINK_STATUS_PHYSICAL_LINK_FLAG |
- LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
- LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
- LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
- LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK |
- LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE |
- LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE);
+ vars->link_status &= ~LINK_UPDATE_MASK;
vars->line_speed = 0;
bnx2x_update_mng(params, vars->link_status);
u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed;
u8 active_external_phy = INT_PHY;
vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
+ vars->link_status &= ~LINK_UPDATE_MASK;
for (phy_index = INT_PHY; phy_index < params->num_phys;
phy_index++) {
phy_vars[phy_index].flow_ctrl = 0;
static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy,
struct link_params *params,
u16 addr, u8 byte_cnt,
- u8 *o_buf)
+ u8 *o_buf, u8 is_init)
{
int rc = 0;
u8 i, j = 0, cnt = 0;
/* 4 byte aligned address */
addr32 = addr & (~0x3);
do {
- if (cnt == I2C_WA_PWR_ITER) {
+ if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) {
bnx2x_warpcore_power_module(params, phy, 0);
/* Note that 100us are not enough here */
- usleep_range(1000,1000);
+ usleep_range(1000, 2000);
bnx2x_warpcore_power_module(params, phy, 1);
}
rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt,
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr,
- byte_cnt, o_buf);
+ byte_cnt, o_buf, 0);
break;
}
return rc;
{
u8 val;
+ int rc;
struct bnx2x *bp = params->bp;
u16 timeout;
/* Initialization time after hot-plug may take up to 300ms for
*/
for (timeout = 0; timeout < 60; timeout++) {
- if (bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val)
- == 0) {
+ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
+ rc = bnx2x_warpcore_read_sfp_module_eeprom(phy,
+ params, 1,
+ 1, &val, 1);
+ else
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1,
+ &val);
+ if (rc == 0) {
DP(NETIF_MSG_LINK,
"SFP+ module initialization took %d ms\n",
timeout * 5);
}
usleep_range(5000, 10000);
}
- return -EINVAL;
+ rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val);
+ return rc;
}
static void bnx2x_8727_power_module(struct bnx2x *bp,
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
.set_link_led = (set_link_led_t)NULL,
- .phy_specific_func = (phy_specific_func_t)NULL
+ .phy_specific_func = (phy_specific_func_t)bnx2x_xgxs_specific_func
};
static struct bnx2x_phy phy_warpcore = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
phy->media_type = ETH_PHY_BASE_T;
break;
case PORT_HW_CFG_NET_SERDES_IF_XFI:
+ phy->supported &= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_10000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause);
phy->media_type = ETH_PHY_XFP_FIBER;
break;
case PORT_HW_CFG_NET_SERDES_IF_SFI:
bnx2x_init_block(bp, BLOCK_DORQ, init_phase);
+ bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
+
if (CHIP_IS_E1(bp) || CHIP_IS_E1H(bp)) {
- bnx2x_init_block(bp, BLOCK_BRB1, init_phase);
if (IS_MF(bp))
low = ((bp->flags & ONE_PORT_FLAG) ? 160 : 246);
/* disable FCOE L2 queue for E1x */
if (CHIP_IS_E1x(bp))
bp->flags |= NO_FCOE_FLAG;
-
+ /* disable FCOE for 57840 device, until FW supports it */
+ switch (ent->driver_data) {
+ case BCM57840_O:
+ case BCM57840_4_10:
+ case BCM57840_2_20:
+ case BCM57840_MFO:
+ case BCM57840_MF:
+ bp->flags |= NO_FCOE_FLAG;
+ }
#endif
"mismatch: [fini] csum=%#x, computed csum=%#x\n",
finicsum, cfcsum);
- /*
- * If we're a pure NIC driver then disable all offloading facilities.
- * This will allow the firmware to optimize aspects of the hardware
- * configuration which will result in improved performance.
- */
- caps_cmd.ofldcaps = 0;
- caps_cmd.iscsicaps = 0;
- caps_cmd.rdmacaps = 0;
- caps_cmd.fcoecaps = 0;
-
/*
* And now tell the firmware to use the configuration we just loaded.
*/
case ixgbe_mac_X540:
case ixgbe_mac_82599EB:
info->so_timestamping =
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE |
SOF_TIMESTAMPING_TX_HARDWARE |
SOF_TIMESTAMPING_RX_HARDWARE |
SOF_TIMESTAMPING_RAW_HARDWARE;
pldat->dma_buff_base_p);
free_irq(ndev->irq, ndev);
iounmap(pldat->net_base);
+ mdiobus_unregister(pldat->mii_bus);
mdiobus_free(pldat->mii_bus);
clk_disable(pldat->clk);
clk_put(pldat->clk);
struct mdiobb_ctrl *ctrl = bus->priv;
module_put(ctrl->ops->owner);
+ mdiobus_unregister(bus);
mdiobus_free(bus);
}
EXPORT_SYMBOL(free_mdio_bitbang);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+ u32 buf_size;
- tbi = tq->buf_info + tq->tx_ring.next2fill;
- tbi->map_type = VMXNET3_MAP_PAGE;
- tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag,
- 0, skb_frag_size(frag),
- DMA_TO_DEVICE);
+ buf_offset = 0;
+ len = skb_frag_size(frag);
+ while (len) {
+ tbi = tq->buf_info + tq->tx_ring.next2fill;
+ if (len < VMXNET3_MAX_TX_BUF_SIZE) {
+ buf_size = len;
+ dw2 |= len;
+ } else {
+ buf_size = VMXNET3_MAX_TX_BUF_SIZE;
+ /* spec says that for TxDesc.len, 0 == 2^14 */
+ }
+ tbi->map_type = VMXNET3_MAP_PAGE;
+ tbi->dma_addr = skb_frag_dma_map(&adapter->pdev->dev, frag,
+ buf_offset, buf_size,
+ DMA_TO_DEVICE);
- tbi->len = skb_frag_size(frag);
+ tbi->len = buf_size;
- gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
- BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
+ gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
+ BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
- gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
- gdesc->dword[2] = cpu_to_le32(dw2 | skb_frag_size(frag));
- gdesc->dword[3] = 0;
+ gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
+ gdesc->dword[2] = cpu_to_le32(dw2);
+ gdesc->dword[3] = 0;
- dev_dbg(&adapter->netdev->dev,
- "txd[%u]: 0x%llu %u %u\n",
- tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
- le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
- vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
- dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+ dev_dbg(&adapter->netdev->dev,
+ "txd[%u]: 0x%llu %u %u\n",
+ tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
+ le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
+ vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+ dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+
+ len -= buf_size;
+ buf_offset += buf_size;
+ }
}
ctx->eop_txd = gdesc;
}
}
+static int txd_estimate(const struct sk_buff *skb)
+{
+ int count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1;
+ int i;
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+
+ count += VMXNET3_TXD_NEEDED(skb_frag_size(frag));
+ }
+ return count;
+}
/*
* Transmits a pkt thru a given tq
union Vmxnet3_GenericDesc tempTxDesc;
#endif
- /* conservatively estimate # of descriptors to use */
- count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) +
- skb_shinfo(skb)->nr_frags + 1;
+ count = txd_estimate(skb);
ctx.ipv4 = (vlan_get_protocol(skb) == cpu_to_be16(ETH_P_IP));
= container_of(p, struct vxlan_fdb, hlist);
unsigned long timeout;
- if (f->state == NUD_PERMANENT)
+ if (f->state & NUD_PERMANENT)
continue;
timeout = f->used + vxlan->age_interval * HZ;
}
bf = list_first_entry(&sc->tx.txbuf, struct ath_buf, list);
+ bf->bf_next = NULL;
list_del(&bf->list);
spin_unlock_bh(&sc->tx.txbuflock);
u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0, seq_first;
u32 ba[WME_BA_BMP_SIZE >> 5];
int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
- bool rc_update = true;
+ bool rc_update = true, isba;
struct ieee80211_tx_rate rates[4];
struct ath_frame_info *fi;
int nframes;
tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
tid = ATH_AN_2_TID(an, tidno);
seq_first = tid->seq_start;
+ isba = ts->ts_flags & ATH9K_TX_BA;
/*
* The hardware occasionally sends a tx status for the wrong TID.
* In this case, the BA status cannot be considered valid and all
* subframes need to be retransmitted
+ *
+ * Only BlockAcks have a TID and therefore normal Acks cannot be
+ * checked
*/
- if (tidno != ts->tid)
+ if (isba && tidno != ts->tid)
txok = false;
isaggr = bf_isaggr(bf);
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bf_type = 0;
+ bf->bf_next = NULL;
bf->bf_lastbf = bf;
ath_tx_fill_desc(sc, bf, txq, fi->framelen);
ath_tx_txqaddbuf(sc, txq, &bf_head, false);
/*
* Check if temperature compensation is supported.
*/
- if (tssi_bounds[4] == 0xff)
+ if (tssi_bounds[4] == 0xff || step == 0xff)
return 0;
/*
int
qla24xx_disable_vp(scsi_qla_host_t *vha)
{
+ unsigned long flags;
int ret;
ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
/* Remove port id from vp target map */
+ spin_lock_irqsave(&vha->hw->vport_slock, flags);
qlt_update_vp_map(vha, RESET_AL_PA);
+ spin_unlock_irqrestore(&vha->hw->vport_slock, flags);
qla2x00_mark_vp_devices_dead(vha);
atomic_set(&vha->vp_state, VP_FAILED);
int pmap_len;
fc_port_t *fcport;
int global_resets;
+ unsigned long flags;
retry:
global_resets = atomic_read(&ha->tgt.qla_tgt->tgt_global_resets_count);
sess->s_id.b.area, sess->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.al_pa, fcport->d_id.b.area, fcport->loop_id);
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
res = true;
qlt_undelete_sess(sess);
kref_get(&sess->se_sess->sess_kref);
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
+
if (sess->local && !local)
sess->local = 0;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
*/
kref_get(&sess->se_sess->sess_kref);
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ sess->conf_compl_supported = (fcport->flags & FCF_CONF_COMP_SUPPORTED);
BUILD_BUG_ON(sizeof(sess->port_name) != sizeof(fcport->port_name));
memcpy(sess->port_name, fcport->port_name, sizeof(sess->port_name));
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf007,
"Reappeared sess %p\n", sess);
}
- sess->s_id = fcport->d_id;
- sess->loop_id = fcport->loop_id;
- sess->conf_compl_supported = !!(fcport->flags &
- FCF_CONF_COMP_SUPPORTED);
+ ha->tgt.tgt_ops->update_sess(sess, fcport->d_id, fcport->loop_id,
+ (fcport->flags & FCF_CONF_COMP_SUPPORTED));
}
if (sess && sess->local) {
int (*check_initiator_node_acl)(struct scsi_qla_host *, unsigned char *,
void *, uint8_t *, uint16_t);
+ void (*update_sess)(struct qla_tgt_sess *, port_id_t, uint16_t, bool);
struct qla_tgt_sess *(*find_sess_by_loop_id)(struct scsi_qla_host *,
const uint16_t);
struct qla_tgt_sess *(*find_sess_by_s_id)(struct scsi_qla_host *,
struct tcm_qla2xxx_tpg, se_tpg);
struct tcm_qla2xxx_lport *lport = tpg->lport;
- return &lport->lport_name[0];
+ return lport->lport_naa_name;
}
static char *tcm_qla2xxx_npiv_get_fabric_wwn(struct se_portal_group *se_tpg)
return 0;
}
+static void tcm_qla2xxx_update_sess(struct qla_tgt_sess *sess, port_id_t s_id,
+ uint16_t loop_id, bool conf_compl_supported)
+{
+ struct qla_tgt *tgt = sess->tgt;
+ struct qla_hw_data *ha = tgt->ha;
+ struct tcm_qla2xxx_lport *lport = ha->tgt.target_lport_ptr;
+ struct se_node_acl *se_nacl = sess->se_sess->se_node_acl;
+ struct tcm_qla2xxx_nacl *nacl = container_of(se_nacl,
+ struct tcm_qla2xxx_nacl, se_node_acl);
+ u32 key;
+
+
+ if (sess->loop_id != loop_id || sess->s_id.b24 != s_id.b24)
+ pr_info("Updating session %p from port %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x loop_id %d -> %d s_id %x:%x:%x -> %x:%x:%x\n",
+ sess,
+ sess->port_name[0], sess->port_name[1],
+ sess->port_name[2], sess->port_name[3],
+ sess->port_name[4], sess->port_name[5],
+ sess->port_name[6], sess->port_name[7],
+ sess->loop_id, loop_id,
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa,
+ s_id.b.domain, s_id.b.area, s_id.b.al_pa);
+
+ if (sess->loop_id != loop_id) {
+ /*
+ * Because we can shuffle loop IDs around and we
+ * update different sessions non-atomically, we might
+ * have overwritten this session's old loop ID
+ * already, and we might end up overwriting some other
+ * session that will be updated later. So we have to
+ * be extra careful and we can't warn about those things...
+ */
+ if (lport->lport_loopid_map[sess->loop_id].se_nacl == se_nacl)
+ lport->lport_loopid_map[sess->loop_id].se_nacl = NULL;
+
+ lport->lport_loopid_map[loop_id].se_nacl = se_nacl;
+
+ sess->loop_id = loop_id;
+ }
+
+ if (sess->s_id.b24 != s_id.b24) {
+ key = (((u32) sess->s_id.b.domain << 16) |
+ ((u32) sess->s_id.b.area << 8) |
+ ((u32) sess->s_id.b.al_pa));
+
+ if (btree_lookup32(&lport->lport_fcport_map, key))
+ WARN(btree_remove32(&lport->lport_fcport_map, key) != se_nacl,
+ "Found wrong se_nacl when updating s_id %x:%x:%x\n",
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa);
+ else
+ WARN(1, "No lport_fcport_map entry for s_id %x:%x:%x\n",
+ sess->s_id.b.domain, sess->s_id.b.area, sess->s_id.b.al_pa);
+
+ key = (((u32) s_id.b.domain << 16) |
+ ((u32) s_id.b.area << 8) |
+ ((u32) s_id.b.al_pa));
+
+ if (btree_lookup32(&lport->lport_fcport_map, key)) {
+ WARN(1, "Already have lport_fcport_map entry for s_id %x:%x:%x\n",
+ s_id.b.domain, s_id.b.area, s_id.b.al_pa);
+ btree_update32(&lport->lport_fcport_map, key, se_nacl);
+ } else {
+ btree_insert32(&lport->lport_fcport_map, key, se_nacl, GFP_ATOMIC);
+ }
+
+ sess->s_id = s_id;
+ nacl->nport_id = key;
+ }
+
+ sess->conf_compl_supported = conf_compl_supported;
+}
+
/*
* Calls into tcm_qla2xxx used by qla2xxx LLD I/O path.
*/
.free_cmd = tcm_qla2xxx_free_cmd,
.free_mcmd = tcm_qla2xxx_free_mcmd,
.free_session = tcm_qla2xxx_free_session,
+ .update_sess = tcm_qla2xxx_update_sess,
.check_initiator_node_acl = tcm_qla2xxx_check_initiator_node_acl,
.find_sess_by_s_id = tcm_qla2xxx_find_sess_by_s_id,
.find_sess_by_loop_id = tcm_qla2xxx_find_sess_by_loop_id,
lport->lport_wwpn = wwpn;
tcm_qla2xxx_format_wwn(&lport->lport_name[0], TCM_QLA2XXX_NAMELEN,
wwpn);
+ sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) wwpn);
ret = tcm_qla2xxx_init_lport(lport);
if (ret != 0)
lport->lport_npiv_wwnn = npiv_wwnn;
tcm_qla2xxx_npiv_format_wwn(&lport->lport_npiv_name[0],
TCM_QLA2XXX_NAMELEN, npiv_wwpn, npiv_wwnn);
+ sprintf(lport->lport_naa_name, "naa.%016llx", (unsigned long long) npiv_wwpn);
/* FIXME: tcm_qla2xxx_npiv_make_lport */
ret = -ENOSYS;
u64 lport_npiv_wwnn;
/* ASCII formatted WWPN for FC Target Lport */
char lport_name[TCM_QLA2XXX_NAMELEN];
+ /* ASCII formatted naa WWPN for VPD page 83 etc */
+ char lport_naa_name[TCM_QLA2XXX_NAMELEN];
/* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */
char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN];
/* map for fc_port pointers in 24-bit FC Port ID space */
*/
iscsit_thread_check_cpumask(conn, current, 1);
- schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
+ wait_event_interruptible(conn->queues_wq,
+ !iscsit_conn_all_queues_empty(conn) ||
+ ts->status == ISCSI_THREAD_SET_RESET);
if ((ts->status == ISCSI_THREAD_SET_RESET) ||
signal_pending(current))
};
struct iscsi_conn {
+ wait_queue_head_t queues_wq;
/* Authentication Successful for this connection */
u8 auth_complete;
/* State connection is currently in */
static int iscsi_login_init_conn(struct iscsi_conn *conn)
{
+ init_waitqueue_head(&conn->queues_wq);
INIT_LIST_HEAD(&conn->conn_list);
INIT_LIST_HEAD(&conn->conn_cmd_list);
INIT_LIST_HEAD(&conn->immed_queue_list);
atomic_set(&conn->check_immediate_queue, 1);
spin_unlock_bh(&conn->immed_queue_lock);
- wake_up_process(conn->thread_set->tx_thread);
+ wake_up(&conn->queues_wq);
}
struct iscsi_queue_req *iscsit_get_cmd_from_immediate_queue(struct iscsi_conn *conn)
atomic_inc(&cmd->response_queue_count);
spin_unlock_bh(&conn->response_queue_lock);
- wake_up_process(conn->thread_set->tx_thread);
+ wake_up(&conn->queues_wq);
}
struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *conn)
}
}
+bool iscsit_conn_all_queues_empty(struct iscsi_conn *conn)
+{
+ bool empty;
+
+ spin_lock_bh(&conn->immed_queue_lock);
+ empty = list_empty(&conn->immed_queue_list);
+ spin_unlock_bh(&conn->immed_queue_lock);
+
+ if (!empty)
+ return empty;
+
+ spin_lock_bh(&conn->response_queue_lock);
+ empty = list_empty(&conn->response_queue_list);
+ spin_unlock_bh(&conn->response_queue_lock);
+
+ return empty;
+}
+
void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn)
{
struct iscsi_queue_req *qr, *qr_tmp;
extern void iscsit_add_cmd_to_response_queue(struct iscsi_cmd *, struct iscsi_conn *, u8);
extern struct iscsi_queue_req *iscsit_get_cmd_from_response_queue(struct iscsi_conn *);
extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_conn *);
+extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *);
extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *);
extern void iscsit_release_cmd(struct iscsi_cmd *);
extern void iscsit_free_cmd(struct iscsi_cmd *);
if (ret < 0)
goto out;
- if (core_dev_setup_virtual_lun0() < 0)
+ ret = core_dev_setup_virtual_lun0();
+ if (ret < 0)
goto out;
return 0;
static u32 se_dev_align_max_sectors(u32 max_sectors, u32 block_size)
{
- u32 tmp, aligned_max_sectors;
+ u32 aligned_max_sectors;
+ u32 alignment;
/*
* Limit max_sectors to a PAGE_SIZE aligned value for modern
* transport_allocate_data_tasks() operation.
*/
- tmp = rounddown((max_sectors * block_size), PAGE_SIZE);
- aligned_max_sectors = (tmp / block_size);
- if (max_sectors != aligned_max_sectors) {
- printk(KERN_INFO "Rounding down aligned max_sectors from %u"
- " to %u\n", max_sectors, aligned_max_sectors);
- return aligned_max_sectors;
- }
+ alignment = max(1ul, PAGE_SIZE / block_size);
+ aligned_max_sectors = rounddown(max_sectors, alignment);
+
+ if (max_sectors != aligned_max_sectors)
+ pr_info("Rounding down aligned max_sectors from %u to %u\n",
+ max_sectors, aligned_max_sectors);
- return max_sectors;
+ return aligned_max_sectors;
}
void se_dev_set_default_attribs(
return 0;
}
+static int sbc_emulate_noop(struct se_cmd *cmd)
+{
+ target_complete_cmd(cmd, GOOD);
+ return 0;
+}
+
static inline u32 sbc_get_size(struct se_cmd *cmd, u32 sectors)
{
return cmd->se_dev->se_sub_dev->se_dev_attrib.block_size * sectors;
size = 0;
cmd->execute_cmd = sbc_emulate_verify;
break;
+ case REZERO_UNIT:
+ case SEEK_6:
+ case SEEK_10:
+ /*
+ * There are still clients out there which use these old SCSI-2
+ * commands. This mainly happens when running VMs with legacy
+ * guest systems, connected via SCSI command pass-through to
+ * iSCSI targets. Make them happy and return status GOOD.
+ */
+ size = 0;
+ cmd->execute_cmd = sbc_emulate_noop;
+ break;
default:
ret = spc_parse_cdb(cmd, &size);
if (ret)
unsigned char buf[SE_INQUIRY_BUF];
int p, ret;
+ memset(buf, 0, SE_INQUIRY_BUF);
+
if (dev == tpg->tpg_virt_lun0.lun_se_dev)
buf[0] = 0x3f; /* Not connected */
else
printk("ABORT_TASK: Found referenced %s task_tag: %u\n",
se_cmd->se_tfo->get_fabric_name(), ref_tag);
- spin_lock_irq(&se_cmd->t_state_lock);
+ spin_lock(&se_cmd->t_state_lock);
if (se_cmd->transport_state & CMD_T_COMPLETE) {
printk("ABORT_TASK: ref_tag: %u already complete, skipping\n", ref_tag);
- spin_unlock_irq(&se_cmd->t_state_lock);
+ spin_unlock(&se_cmd->t_state_lock);
spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
goto out;
}
se_cmd->transport_state |= CMD_T_ABORTED;
- spin_unlock_irq(&se_cmd->t_state_lock);
+ spin_unlock(&se_cmd->t_state_lock);
list_del_init(&se_cmd->se_cmd_list);
kref_get(&se_cmd->cmd_kref);
se_cmd->se_tmr_req->response = TMR_LUN_DOES_NOT_EXIST;
se_cmd->se_tfo->queue_tm_rsp(se_cmd);
- transport_generic_free_cmd(se_cmd, 0);
}
/**
},
{ },
};
-MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids);
+MODULE_DEVICE_TABLE(platform, exynos_tmu_driver_ids);
static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
struct platform_device *pdev)
goto error_free_priv;
}
- zone = thermal_zone_device_register("rcar_thermal", 0, priv,
+ zone = thermal_zone_device_register("rcar_thermal", 0, 0, priv,
&rcar_thermal_zone_ops, 0, 0);
if (IS_ERR(zone)) {
dev_err(&pdev->dev, "thermal zone device is NULL\n");
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateInitWait:
info->feature_resize = val;
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
#endif
}
+static void gntdev_free_map(struct grant_map *map)
+{
+ if (map == NULL)
+ return;
+
+ if (map->pages)
+ free_xenballooned_pages(map->count, map->pages);
+ kfree(map->pages);
+ kfree(map->grants);
+ kfree(map->map_ops);
+ kfree(map->unmap_ops);
+ kfree(map->kmap_ops);
+ kfree(map);
+}
+
static struct grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count)
{
struct grant_map *add;
return add;
err:
- kfree(add->pages);
- kfree(add->grants);
- kfree(add->map_ops);
- kfree(add->unmap_ops);
- kfree(add->kmap_ops);
- kfree(add);
+ gntdev_free_map(add);
return NULL;
}
evtchn_put(map->notify.event);
}
- if (map->pages) {
- if (!use_ptemod)
- unmap_grant_pages(map, 0, map->count);
-
- free_xenballooned_pages(map->count, map->pages);
- }
- kfree(map->pages);
- kfree(map->grants);
- kfree(map->map_ops);
- kfree(map->unmap_ops);
- kfree(map);
+ if (map->pages && !use_ptemod)
+ unmap_grant_pages(map, 0, map->count);
+ gntdev_free_map(map);
}
/* ------------------------------------------------------------------ */
goto out;
/* Can't write a xenbus message larger we can buffer */
- if ((len + u->len) > sizeof(u->u.buffer)) {
+ if (len > sizeof(u->u.buffer) - u->len) {
/* On error, dump existing buffer */
u->len = 0;
rc = -EINVAL;
unsigned int sz = sizeof(struct bio) + extra_size;
struct kmem_cache *slab = NULL;
struct bio_slab *bslab, *new_bio_slabs;
+ unsigned int new_bio_slab_max;
unsigned int i, entry = -1;
mutex_lock(&bio_slab_lock);
goto out_unlock;
if (bio_slab_nr == bio_slab_max && entry == -1) {
- bio_slab_max <<= 1;
+ new_bio_slab_max = bio_slab_max << 1;
new_bio_slabs = krealloc(bio_slabs,
- bio_slab_max * sizeof(struct bio_slab),
+ new_bio_slab_max * sizeof(struct bio_slab),
GFP_KERNEL);
if (!new_bio_slabs)
goto out_unlock;
+ bio_slab_max = new_bio_slab_max;
bio_slabs = new_bio_slabs;
}
if (entry == -1)
*max_len = handle_length;
type = 255;
}
+ if (dentry)
+ dput(dentry);
return type;
}
"inode=%lu", ino + 1);
continue;
}
+ BUFFER_TRACE(inode_bitmap_bh, "get_write_access");
+ err = ext4_journal_get_write_access(handle, inode_bitmap_bh);
+ if (err)
+ goto fail;
ext4_lock_group(sb, group);
ret2 = ext4_test_and_set_bit(ino, inode_bitmap_bh->b_data);
ext4_unlock_group(sb, group);
goto out;
got:
+ BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata");
+ err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh);
+ if (err)
+ goto fail;
+
/* We may have to initialize the block bitmap if it isn't already */
if (ext4_has_group_desc_csum(sb) &&
gdp->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
goto fail;
}
- BUFFER_TRACE(inode_bitmap_bh, "get_write_access");
- err = ext4_journal_get_write_access(handle, inode_bitmap_bh);
- if (err)
- goto fail;
-
BUFFER_TRACE(group_desc_bh, "get_write_access");
err = ext4_journal_get_write_access(handle, group_desc_bh);
if (err)
}
ext4_unlock_group(sb, group);
- BUFFER_TRACE(inode_bitmap_bh, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, NULL, inode_bitmap_bh);
- if (err)
- goto fail;
-
BUFFER_TRACE(group_desc_bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, NULL, group_desc_bh);
if (err)
return __close_fd(files, fd);
if (fd >= rlimit(RLIMIT_NOFILE))
- return -EMFILE;
+ return -EBADF;
spin_lock(&files->file_lock);
err = expand_files(files, fd);
return -EINVAL;
if (newfd >= rlimit(RLIMIT_NOFILE))
- return -EMFILE;
+ return -EBADF;
spin_lock(&files->file_lock);
err = expand_files(files, newfd);
{
char buf1[NFS_DNS_HOSTNAME_MAXLEN+1];
struct nfs_dns_ent key, *item;
- unsigned long ttl;
+ unsigned int ttl;
ssize_t len;
int ret = -EINVAL;
key.namelen = len;
memset(&key.h, 0, sizeof(key.h));
- ttl = get_expiry(&buf);
+ if (get_uint(&buf, &ttl) < 0)
+ goto out;
if (ttl == 0)
goto out;
key.h.expiry_time = ttl + seconds_since_boot();
if (ctx->cred != NULL)
put_rpccred(ctx->cred);
dput(ctx->dentry);
- nfs_sb_deactive(sb);
+ if (is_sync)
+ nfs_sb_deactive(sb);
+ else
+ nfs_sb_deactive_async(sb);
kfree(ctx->mdsthreshold);
kfree(ctx);
}
extern void __exit unregister_nfs_fs(void);
extern void nfs_sb_active(struct super_block *sb);
extern void nfs_sb_deactive(struct super_block *sb);
+extern void nfs_sb_deactive_async(struct super_block *sb);
/* namespace.c */
+#define NFS_PATH_CANONICAL 1
extern char *nfs_path(char **p, struct dentry *dentry,
- char *buffer, ssize_t buflen);
+ char *buffer, ssize_t buflen, unsigned flags);
extern struct vfsmount *nfs_d_automount(struct path *path);
struct vfsmount *nfs_submount(struct nfs_server *, struct dentry *,
struct nfs_fh *, struct nfs_fattr *);
char *buffer, ssize_t buflen)
{
char *dummy;
- return nfs_path(&dummy, dentry, buffer, buflen);
+ return nfs_path(&dummy, dentry, buffer, buflen, NFS_PATH_CANONICAL);
}
/*
else
msg.rpc_proc = &mnt_clnt->cl_procinfo[MOUNTPROC_MNT];
- status = rpc_call_sync(mnt_clnt, &msg, 0);
+ status = rpc_call_sync(mnt_clnt, &msg, RPC_TASK_SOFT|RPC_TASK_TIMEOUT);
rpc_shutdown_client(mnt_clnt);
if (status < 0)
* @dentry - pointer to dentry
* @buffer - result buffer
* @buflen - length of buffer
+ * @flags - options (see below)
*
* Helper function for constructing the server pathname
* by arbitrary hashed dentry.
* This is mainly for use in figuring out the path on the
* server side when automounting on top of an existing partition
* and in generating /proc/mounts and friends.
+ *
+ * Supported flags:
+ * NFS_PATH_CANONICAL: ensure there is exactly one slash after
+ * the original device (export) name
+ * (if unset, the original name is returned verbatim)
*/
-char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen)
+char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen,
+ unsigned flags)
{
char *end;
int namelen;
rcu_read_unlock();
goto rename_retry;
}
- if (*end != '/') {
+ if ((flags & NFS_PATH_CANONICAL) && *end != '/') {
if (--buflen < 0) {
spin_unlock(&dentry->d_lock);
rcu_read_unlock();
return end;
}
namelen = strlen(base);
- /* Strip off excess slashes in base string */
- while (namelen > 0 && base[namelen - 1] == '/')
- namelen--;
+ if (flags & NFS_PATH_CANONICAL) {
+ /* Strip off excess slashes in base string */
+ while (namelen > 0 && base[namelen - 1] == '/')
+ namelen--;
+ }
buflen -= namelen;
if (buflen < 0) {
spin_unlock(&dentry->d_lock);
static char *nfs4_path(struct dentry *dentry, char *buffer, ssize_t buflen)
{
char *limit;
- char *path = nfs_path(&limit, dentry, buffer, buflen);
+ char *path = nfs_path(&limit, dentry, buffer, buflen,
+ NFS_PATH_CANONICAL);
if (!IS_ERR(path)) {
char *path_component = nfs_path_component(path, limit);
if (path_component)
dprintk("%s ERROR: %d Reset session\n", __func__,
errorcode);
nfs4_schedule_session_recovery(clp->cl_session, errorcode);
- exception->retry = 1;
- break;
+ goto wait_on_recovery;
#endif /* defined(CONFIG_NFS_V4_1) */
case -NFS4ERR_FILE_OPEN:
if (exception->timeout > HZ) {
data->timestamp = jiffies;
if (nfs4_setup_sequence(data->o_arg.server,
&data->o_arg.seq_args,
- &data->o_res.seq_res, task))
- return;
- rpc_call_start(task);
+ &data->o_res.seq_res,
+ task) != 0)
+ nfs_release_seqid(data->o_arg.seqid);
+ else
+ rpc_call_start(task);
return;
unlock_no_action:
rcu_read_unlock();
/* even though OPEN succeeded, access is denied. Close the file */
nfs4_close_state(state, fmode);
- return -NFS4ERR_ACCESS;
+ return -EACCES;
}
/*
nfs4_put_open_state(calldata->state);
nfs_free_seqid(calldata->arg.seqid);
nfs4_put_state_owner(sp);
- nfs_sb_deactive(sb);
+ nfs_sb_deactive_async(sb);
kfree(calldata);
}
if (nfs4_setup_sequence(NFS_SERVER(inode),
&calldata->arg.seq_args,
&calldata->res.seq_res,
- task))
- goto out;
- rpc_call_start(task);
+ task) != 0)
+ nfs_release_seqid(calldata->arg.seqid);
+ else
+ rpc_call_start(task);
out:
dprintk("%s: done!\n", __func__);
}
if (nfs4_async_handle_error(task, calldata->server, NULL) == -EAGAIN)
rpc_restart_call_prepare(task);
}
+ nfs_release_seqid(calldata->arg.seqid);
}
static void nfs4_locku_prepare(struct rpc_task *task, void *data)
calldata->timestamp = jiffies;
if (nfs4_setup_sequence(calldata->server,
&calldata->arg.seq_args,
- &calldata->res.seq_res, task))
- return;
- rpc_call_start(task);
+ &calldata->res.seq_res,
+ task) != 0)
+ nfs_release_seqid(calldata->arg.seqid);
+ else
+ rpc_call_start(task);
}
static const struct rpc_call_ops nfs4_locku_ops = {
/* Do we need to do an open_to_lock_owner? */
if (!(data->arg.lock_seqid->sequence->flags & NFS_SEQID_CONFIRMED)) {
if (nfs_wait_on_sequence(data->arg.open_seqid, task) != 0)
- return;
+ goto out_release_lock_seqid;
data->arg.open_stateid = &state->stateid;
data->arg.new_lock_owner = 1;
data->res.open_seqid = data->arg.open_seqid;
data->timestamp = jiffies;
if (nfs4_setup_sequence(data->server,
&data->arg.seq_args,
- &data->res.seq_res, task))
+ &data->res.seq_res,
+ task) == 0) {
+ rpc_call_start(task);
return;
- rpc_call_start(task);
- dprintk("%s: done!, ret = %d\n", __func__, data->rpc_status);
+ }
+ nfs_release_seqid(data->arg.open_seqid);
+out_release_lock_seqid:
+ nfs_release_seqid(data->arg.lock_seqid);
+ dprintk("%s: done!, ret = %d\n", __func__, task->tk_status);
}
static void nfs4_recover_lock_prepare(struct rpc_task *task, void *calldata)
tbl->slots = new;
tbl->max_slots = max_slots;
}
- tbl->highest_used_slotid = -1; /* no slot is currently used */
+ tbl->highest_used_slotid = NFS4_NO_SLOT;
for (i = 0; i < tbl->max_slots; i++)
tbl->slots[i].seq_nr = ivalue;
spin_unlock(&tbl->slot_tbl_lock);
if (likely(nfsi->layout == NULL)) { /* Won the race? */
nfsi->layout = new;
return new;
- }
- pnfs_free_layout_hdr(new);
+ } else if (new != NULL)
+ pnfs_free_layout_hdr(new);
out_existing:
pnfs_get_layout_hdr(nfsi->layout);
return nfsi->layout;
#include <linux/parser.h>
#include <linux/nsproxy.h>
#include <linux/rcupdate.h>
+#include <linux/kthread.h>
#include <asm/uaccess.h>
}
EXPORT_SYMBOL_GPL(nfs_sb_deactive);
+static int nfs_deactivate_super_async_work(void *ptr)
+{
+ struct super_block *sb = ptr;
+
+ deactivate_super(sb);
+ module_put_and_exit(0);
+ return 0;
+}
+
+/*
+ * same effect as deactivate_super, but will do final unmount in kthread
+ * context
+ */
+static void nfs_deactivate_super_async(struct super_block *sb)
+{
+ struct task_struct *task;
+ char buf[INET6_ADDRSTRLEN + 1];
+ struct nfs_server *server = NFS_SB(sb);
+ struct nfs_client *clp = server->nfs_client;
+
+ if (!atomic_add_unless(&sb->s_active, -1, 1)) {
+ rcu_read_lock();
+ snprintf(buf, sizeof(buf),
+ rpc_peeraddr2str(clp->cl_rpcclient, RPC_DISPLAY_ADDR));
+ rcu_read_unlock();
+
+ __module_get(THIS_MODULE);
+ task = kthread_run(nfs_deactivate_super_async_work, sb,
+ "%s-deactivate-super", buf);
+ if (IS_ERR(task)) {
+ pr_err("%s: kthread_run: %ld\n",
+ __func__, PTR_ERR(task));
+ /* make synchronous call and hope for the best */
+ deactivate_super(sb);
+ module_put(THIS_MODULE);
+ }
+ }
+}
+
+void nfs_sb_deactive_async(struct super_block *sb)
+{
+ struct nfs_server *server = NFS_SB(sb);
+
+ if (atomic_dec_and_test(&server->active))
+ nfs_deactivate_super_async(sb);
+}
+EXPORT_SYMBOL_GPL(nfs_sb_deactive_async);
+
/*
* Deliver file system statistics to userspace
*/
int err = 0;
if (!page)
return -ENOMEM;
- devname = nfs_path(&dummy, root, page, PAGE_SIZE);
+ devname = nfs_path(&dummy, root, page, PAGE_SIZE, 0);
if (IS_ERR(devname))
err = PTR_ERR(devname);
else
nfs_dec_sillycount(data->dir);
nfs_free_unlinkdata(data);
- nfs_sb_deactive(sb);
+ nfs_sb_deactive_async(sb);
}
static void nfs_unlink_prepare(struct rpc_task *task, void *calldata)
--- /dev/null
+/*
+ * Statically sized hash table implementation
+ * (C) 2012 Sasha Levin <levinsasha928@gmail.com>
+ */
+
+#ifndef _LINUX_HASHTABLE_H
+#define _LINUX_HASHTABLE_H
+
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/hash.h>
+#include <linux/rculist.h>
+
+#define DEFINE_HASHTABLE(name, bits) \
+ struct hlist_head name[1 << (bits)] = \
+ { [0 ... ((1 << (bits)) - 1)] = HLIST_HEAD_INIT }
+
+#define DECLARE_HASHTABLE(name, bits) \
+ struct hlist_head name[1 << (bits)]
+
+#define HASH_SIZE(name) (ARRAY_SIZE(name))
+#define HASH_BITS(name) ilog2(HASH_SIZE(name))
+
+/* Use hash_32 when possible to allow for fast 32bit hashing in 64bit kernels. */
+#define hash_min(val, bits) \
+ (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits))
+
+static inline void __hash_init(struct hlist_head *ht, unsigned int sz)
+{
+ unsigned int i;
+
+ for (i = 0; i < sz; i++)
+ INIT_HLIST_HEAD(&ht[i]);
+}
+
+/**
+ * hash_init - initialize a hash table
+ * @hashtable: hashtable to be initialized
+ *
+ * Calculates the size of the hashtable from the given parameter, otherwise
+ * same as hash_init_size.
+ *
+ * This has to be a macro since HASH_BITS() will not work on pointers since
+ * it calculates the size during preprocessing.
+ */
+#define hash_init(hashtable) __hash_init(hashtable, HASH_SIZE(hashtable))
+
+/**
+ * hash_add - add an object to a hashtable
+ * @hashtable: hashtable to add to
+ * @node: the &struct hlist_node of the object to be added
+ * @key: the key of the object to be added
+ */
+#define hash_add(hashtable, node, key) \
+ hlist_add_head(node, &hashtable[hash_min(key, HASH_BITS(hashtable))])
+
+/**
+ * hash_add_rcu - add an object to a rcu enabled hashtable
+ * @hashtable: hashtable to add to
+ * @node: the &struct hlist_node of the object to be added
+ * @key: the key of the object to be added
+ */
+#define hash_add_rcu(hashtable, node, key) \
+ hlist_add_head_rcu(node, &hashtable[hash_min(key, HASH_BITS(hashtable))])
+
+/**
+ * hash_hashed - check whether an object is in any hashtable
+ * @node: the &struct hlist_node of the object to be checked
+ */
+static inline bool hash_hashed(struct hlist_node *node)
+{
+ return !hlist_unhashed(node);
+}
+
+static inline bool __hash_empty(struct hlist_head *ht, unsigned int sz)
+{
+ unsigned int i;
+
+ for (i = 0; i < sz; i++)
+ if (!hlist_empty(&ht[i]))
+ return false;
+
+ return true;
+}
+
+/**
+ * hash_empty - check whether a hashtable is empty
+ * @hashtable: hashtable to check
+ *
+ * This has to be a macro since HASH_BITS() will not work on pointers since
+ * it calculates the size during preprocessing.
+ */
+#define hash_empty(hashtable) __hash_empty(hashtable, HASH_SIZE(hashtable))
+
+/**
+ * hash_del - remove an object from a hashtable
+ * @node: &struct hlist_node of the object to remove
+ */
+static inline void hash_del(struct hlist_node *node)
+{
+ hlist_del_init(node);
+}
+
+/**
+ * hash_del_rcu - remove an object from a rcu enabled hashtable
+ * @node: &struct hlist_node of the object to remove
+ */
+static inline void hash_del_rcu(struct hlist_node *node)
+{
+ hlist_del_init_rcu(node);
+}
+
+/**
+ * hash_for_each - iterate over a hashtable
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each(name, bkt, node, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry(obj, node, &name[bkt], member)
+
+/**
+ * hash_for_each_rcu - iterate over a rcu enabled hashtable
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each_rcu(name, bkt, node, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry_rcu(obj, node, &name[bkt], member)
+
+/**
+ * hash_for_each_safe - iterate over a hashtable safe against removal of
+ * hash entry
+ * @name: hashtable to iterate
+ * @bkt: integer to use as bucket loop cursor
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @tmp: a &struct used for temporary storage
+ * @obj: the type * to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ */
+#define hash_for_each_safe(name, bkt, node, tmp, obj, member) \
+ for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\
+ hlist_for_each_entry_safe(obj, node, tmp, &name[bkt], member)
+
+/**
+ * hash_for_each_possible - iterate over all possible objects hashing to the
+ * same bucket
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible(name, obj, node, member, key) \
+ hlist_for_each_entry(obj, node, &name[hash_min(key, HASH_BITS(name))], member)
+
+/**
+ * hash_for_each_possible_rcu - iterate over all possible objects hashing to the
+ * same bucket in an rcu enabled hashtable
+ * in a rcu enabled hashtable
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible_rcu(name, obj, node, member, key) \
+ hlist_for_each_entry_rcu(obj, node, &name[hash_min(key, HASH_BITS(name))], member)
+
+/**
+ * hash_for_each_possible_safe - iterate over all possible objects hashing to the
+ * same bucket safe against removals
+ * @name: hashtable to iterate
+ * @obj: the type * to use as a loop cursor for each entry
+ * @node: the &struct list_head to use as a loop cursor for each entry
+ * @tmp: a &struct used for temporary storage
+ * @member: the name of the hlist_node within the struct
+ * @key: the key of the objects to iterate over
+ */
+#define hash_for_each_possible_safe(name, obj, node, tmp, member, key) \
+ hlist_for_each_entry_safe(obj, node, tmp, \
+ &name[hash_min(key, HASH_BITS(name))], member)
+
+
+#endif
* @h_list: list of input handles associated with the device. When
* accessing the list dev->mutex must be held
* @node: used to place the device onto input_dev_list
+ * @num_vals: number of values queued in the current frame
+ * @max_vals: maximum number of values queued in a frame
+ * @vals: array of values queued in the current frame
+ * @devres_managed: indicates that devices is managed with devres framework
+ * and needs not be explicitly unregistered or freed.
*/
struct input_dev {
const char *name;
unsigned int num_vals;
unsigned int max_vals;
struct input_value *vals;
+
+ bool devres_managed;
};
#define to_input_dev(d) container_of(d, struct input_dev, dev)
struct list_head h_node;
};
-struct input_dev *input_allocate_device(void);
+struct input_dev __must_check *input_allocate_device(void);
+struct input_dev __must_check *devm_input_allocate_device(struct device *);
void input_free_device(struct input_dev *dev);
static inline struct input_dev *input_get_device(struct input_dev *dev)
*/
#define KVM_MEMSLOT_INVALID (1UL << 16)
-/*
- * If we support unaligned MMIO, at most one fragment will be split into two:
- */
-#ifdef KVM_UNALIGNED_MMIO
-# define KVM_EXTRA_MMIO_FRAGMENTS 1
-#else
-# define KVM_EXTRA_MMIO_FRAGMENTS 0
-#endif
-
-#define KVM_USER_MMIO_SIZE 8
-
-#define KVM_MAX_MMIO_FRAGMENTS \
- (KVM_MMIO_SIZE / KVM_USER_MMIO_SIZE + KVM_EXTRA_MMIO_FRAGMENTS)
+/* Two fragments for cross MMIO pages. */
+#define KVM_MAX_MMIO_FRAGMENTS 2
/*
* For the normal pfn, the highest 12 bits should be zero,
-header-y += md_p.h
-header-y += md_u.h
+++ /dev/null
-/*
- md_p.h : physical layout of Linux RAID devices
- Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- You should have received a copy of the GNU General Public License
- (for example /usr/src/linux/COPYING); if not, write to the Free
- Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _MD_P_H
-#define _MD_P_H
-
-#include <linux/types.h>
-
-/*
- * RAID superblock.
- *
- * The RAID superblock maintains some statistics on each RAID configuration.
- * Each real device in the RAID set contains it near the end of the device.
- * Some of the ideas are copied from the ext2fs implementation.
- *
- * We currently use 4096 bytes as follows:
- *
- * word offset function
- *
- * 0 - 31 Constant generic RAID device information.
- * 32 - 63 Generic state information.
- * 64 - 127 Personality specific information.
- * 128 - 511 12 32-words descriptors of the disks in the raid set.
- * 512 - 911 Reserved.
- * 912 - 1023 Disk specific descriptor.
- */
-
-/*
- * If x is the real device size in bytes, we return an apparent size of:
- *
- * y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES
- *
- * and place the 4kB superblock at offset y.
- */
-#define MD_RESERVED_BYTES (64 * 1024)
-#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512)
-
-#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)
-
-#define MD_SB_BYTES 4096
-#define MD_SB_WORDS (MD_SB_BYTES / 4)
-#define MD_SB_SECTORS (MD_SB_BYTES / 512)
-
-/*
- * The following are counted in 32-bit words
- */
-#define MD_SB_GENERIC_OFFSET 0
-#define MD_SB_PERSONALITY_OFFSET 64
-#define MD_SB_DISKS_OFFSET 128
-#define MD_SB_DESCRIPTOR_OFFSET 992
-
-#define MD_SB_GENERIC_CONSTANT_WORDS 32
-#define MD_SB_GENERIC_STATE_WORDS 32
-#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS)
-#define MD_SB_PERSONALITY_WORDS 64
-#define MD_SB_DESCRIPTOR_WORDS 32
-#define MD_SB_DISKS 27
-#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS)
-#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS)
-#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS)
-
-/*
- * Device "operational" state bits
- */
-#define MD_DISK_FAULTY 0 /* disk is faulty / operational */
-#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */
-#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */
-#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */
-
-#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config.
- * read requests will only be sent here in
- * dire need
- */
-
-typedef struct mdp_device_descriptor_s {
- __u32 number; /* 0 Device number in the entire set */
- __u32 major; /* 1 Device major number */
- __u32 minor; /* 2 Device minor number */
- __u32 raid_disk; /* 3 The role of the device in the raid set */
- __u32 state; /* 4 Operational state */
- __u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5];
-} mdp_disk_t;
-
-#define MD_SB_MAGIC 0xa92b4efc
-
-/*
- * Superblock state bits
- */
-#define MD_SB_CLEAN 0
-#define MD_SB_ERRORS 1
-
-#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */
-
-/*
- * Notes:
- * - if an array is being reshaped (restriped) in order to change the
- * the number of active devices in the array, 'raid_disks' will be
- * the larger of the old and new numbers. 'delta_disks' will
- * be the "new - old". So if +ve, raid_disks is the new value, and
- * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the
- * old value and "raid_disks+delta_disks" is the new (smaller) value.
- */
-
-
-typedef struct mdp_superblock_s {
- /*
- * Constant generic information
- */
- __u32 md_magic; /* 0 MD identifier */
- __u32 major_version; /* 1 major version to which the set conforms */
- __u32 minor_version; /* 2 minor version ... */
- __u32 patch_version; /* 3 patchlevel version ... */
- __u32 gvalid_words; /* 4 Number of used words in this section */
- __u32 set_uuid0; /* 5 Raid set identifier */
- __u32 ctime; /* 6 Creation time */
- __u32 level; /* 7 Raid personality */
- __u32 size; /* 8 Apparent size of each individual disk */
- __u32 nr_disks; /* 9 total disks in the raid set */
- __u32 raid_disks; /* 10 disks in a fully functional raid set */
- __u32 md_minor; /* 11 preferred MD minor device number */
- __u32 not_persistent; /* 12 does it have a persistent superblock */
- __u32 set_uuid1; /* 13 Raid set identifier #2 */
- __u32 set_uuid2; /* 14 Raid set identifier #3 */
- __u32 set_uuid3; /* 15 Raid set identifier #4 */
- __u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16];
-
- /*
- * Generic state information
- */
- __u32 utime; /* 0 Superblock update time */
- __u32 state; /* 1 State bits (clean, ...) */
- __u32 active_disks; /* 2 Number of currently active disks */
- __u32 working_disks; /* 3 Number of working disks */
- __u32 failed_disks; /* 4 Number of failed disks */
- __u32 spare_disks; /* 5 Number of spare disks */
- __u32 sb_csum; /* 6 checksum of the whole superblock */
-#ifdef __BIG_ENDIAN
- __u32 events_hi; /* 7 high-order of superblock update count */
- __u32 events_lo; /* 8 low-order of superblock update count */
- __u32 cp_events_hi; /* 9 high-order of checkpoint update count */
- __u32 cp_events_lo; /* 10 low-order of checkpoint update count */
-#else
- __u32 events_lo; /* 7 low-order of superblock update count */
- __u32 events_hi; /* 8 high-order of superblock update count */
- __u32 cp_events_lo; /* 9 low-order of checkpoint update count */
- __u32 cp_events_hi; /* 10 high-order of checkpoint update count */
-#endif
- __u32 recovery_cp; /* 11 recovery checkpoint sector count */
- /* There are only valid for minor_version > 90 */
- __u64 reshape_position; /* 12,13 next address in array-space for reshape */
- __u32 new_level; /* 14 new level we are reshaping to */
- __u32 delta_disks; /* 15 change in number of raid_disks */
- __u32 new_layout; /* 16 new layout */
- __u32 new_chunk; /* 17 new chunk size (bytes) */
- __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18];
-
- /*
- * Personality information
- */
- __u32 layout; /* 0 the array's physical layout */
- __u32 chunk_size; /* 1 chunk size in bytes */
- __u32 root_pv; /* 2 LV root PV */
- __u32 root_block; /* 3 LV root block */
- __u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4];
-
- /*
- * Disks information
- */
- mdp_disk_t disks[MD_SB_DISKS];
-
- /*
- * Reserved
- */
- __u32 reserved[MD_SB_RESERVED_WORDS];
-
- /*
- * Active descriptor
- */
- mdp_disk_t this_disk;
-
-} mdp_super_t;
-
-static inline __u64 md_event(mdp_super_t *sb) {
- __u64 ev = sb->events_hi;
- return (ev<<32)| sb->events_lo;
-}
-
-#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1)
-
-/*
- * The version-1 superblock :
- * All numeric fields are little-endian.
- *
- * total size: 256 bytes plus 2 per device.
- * 1K allows 384 devices.
- */
-struct mdp_superblock_1 {
- /* constant array information - 128 bytes */
- __le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */
- __le32 major_version; /* 1 */
- __le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */
- __le32 pad0; /* always set to 0 when writing */
-
- __u8 set_uuid[16]; /* user-space generated. */
- char set_name[32]; /* set and interpreted by user-space */
-
- __le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/
- __le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */
- __le32 layout; /* only for raid5 and raid10 currently */
- __le64 size; /* used size of component devices, in 512byte sectors */
-
- __le32 chunksize; /* in 512byte sectors */
- __le32 raid_disks;
- __le32 bitmap_offset; /* sectors after start of superblock that bitmap starts
- * NOTE: signed, so bitmap can be before superblock
- * only meaningful of feature_map[0] is set.
- */
-
- /* These are only valid with feature bit '4' */
- __le32 new_level; /* new level we are reshaping to */
- __le64 reshape_position; /* next address in array-space for reshape */
- __le32 delta_disks; /* change in number of raid_disks */
- __le32 new_layout; /* new layout */
- __le32 new_chunk; /* new chunk size (512byte sectors) */
- __le32 new_offset; /* signed number to add to data_offset in new
- * layout. 0 == no-change. This can be
- * different on each device in the array.
- */
-
- /* constant this-device information - 64 bytes */
- __le64 data_offset; /* sector start of data, often 0 */
- __le64 data_size; /* sectors in this device that can be used for data */
- __le64 super_offset; /* sector start of this superblock */
- __le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */
- __le32 dev_number; /* permanent identifier of this device - not role in raid */
- __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */
- __u8 device_uuid[16]; /* user-space setable, ignored by kernel */
- __u8 devflags; /* per-device flags. Only one defined...*/
-#define WriteMostly1 1 /* mask for writemostly flag in above */
- /* Bad block log. If there are any bad blocks the feature flag is set.
- * If offset and size are non-zero, that space is reserved and available
- */
- __u8 bblog_shift; /* shift from sectors to block size */
- __le16 bblog_size; /* number of sectors reserved for list */
- __le32 bblog_offset; /* sector offset from superblock to bblog,
- * signed - not unsigned */
-
- /* array state information - 64 bytes */
- __le64 utime; /* 40 bits second, 24 bits microseconds */
- __le64 events; /* incremented when superblock updated */
- __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */
- __le32 sb_csum; /* checksum up to devs[max_dev] */
- __le32 max_dev; /* size of devs[] array to consider */
- __u8 pad3[64-32]; /* set to 0 when writing */
-
- /* device state information. Indexed by dev_number.
- * 2 bytes per device
- * Note there are no per-device state flags. State information is rolled
- * into the 'roles' value. If a device is spare or faulty, then it doesn't
- * have a meaningful role.
- */
- __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */
-};
-
-/* feature_map bits */
-#define MD_FEATURE_BITMAP_OFFSET 1
-#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and
- * must be honoured
- */
-#define MD_FEATURE_RESHAPE_ACTIVE 4
-#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */
-#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an
- * active device with same 'role'.
- * 'recovery_offset' is also set.
- */
-#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number
- * of devices, but is going
- * backwards anyway.
- */
-#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */
-#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \
- |MD_FEATURE_RECOVERY_OFFSET \
- |MD_FEATURE_RESHAPE_ACTIVE \
- |MD_FEATURE_BAD_BLOCKS \
- |MD_FEATURE_REPLACEMENT \
- |MD_FEATURE_RESHAPE_BACKWARDS \
- |MD_FEATURE_NEW_OFFSET \
- )
-
-#endif
(for example /usr/src/linux/COPYING); if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#ifndef _MD_U_H
#define _MD_U_H
-/*
- * Different major versions are not compatible.
- * Different minor versions are only downward compatible.
- * Different patchlevel versions are downward and upward compatible.
- */
-#define MD_MAJOR_VERSION 0
-#define MD_MINOR_VERSION 90
-/*
- * MD_PATCHLEVEL_VERSION indicates kernel functionality.
- * >=1 means different superblock formats are selectable using SET_ARRAY_INFO
- * and major_version/minor_version accordingly
- * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT
- * in the super status byte
- * >=3 means that bitmap superblock version 4 is supported, which uses
- * little-ending representation rather than host-endian
- */
-#define MD_PATCHLEVEL_VERSION 3
-
-/* ioctls */
-
-/* status */
-#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t)
-#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t)
-#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
-#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13)
-#define RAID_AUTORUN _IO (MD_MAJOR, 0x14)
-#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t)
-
-/* configuration */
-#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20)
-#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
-#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22)
-#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t)
-#define SET_DISK_INFO _IO (MD_MAJOR, 0x24)
-#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25)
-#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26)
-#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27)
-#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28)
-#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29)
-#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a)
-#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int)
+#include <uapi/linux/raid/md_u.h>
-/* usage */
-#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t)
-/* 0x31 was START_ARRAY */
-#define STOP_ARRAY _IO (MD_MAJOR, 0x32)
-#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33)
-#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34)
-
-/* 63 partitions with the alternate major number (mdp) */
-#define MdpMinorShift 6
-#ifdef __KERNEL__
extern int mdp_major;
-#endif
-
-typedef struct mdu_version_s {
- int major;
- int minor;
- int patchlevel;
-} mdu_version_t;
-
-typedef struct mdu_array_info_s {
- /*
- * Generic constant information
- */
- int major_version;
- int minor_version;
- int patch_version;
- int ctime;
- int level;
- int size;
- int nr_disks;
- int raid_disks;
- int md_minor;
- int not_persistent;
-
- /*
- * Generic state information
- */
- int utime; /* 0 Superblock update time */
- int state; /* 1 State bits (clean, ...) */
- int active_disks; /* 2 Number of currently active disks */
- int working_disks; /* 3 Number of working disks */
- int failed_disks; /* 4 Number of failed disks */
- int spare_disks; /* 5 Number of spare disks */
-
- /*
- * Personality information
- */
- int layout; /* 0 the array's physical layout */
- int chunk_size; /* 1 chunk size in bytes */
-
-} mdu_array_info_t;
-
-/* non-obvious values for 'level' */
-#define LEVEL_MULTIPATH (-4)
-#define LEVEL_LINEAR (-1)
-#define LEVEL_FAULTY (-5)
-
-/* we need a value for 'no level specified' and 0
- * means 'raid0', so we need something else. This is
- * for internal use only
- */
-#define LEVEL_NONE (-1000000)
-
-typedef struct mdu_disk_info_s {
- /*
- * configuration/status of one particular disk
- */
- int number;
- int major;
- int minor;
- int raid_disk;
- int state;
-
-} mdu_disk_info_t;
-
-typedef struct mdu_start_info_s {
- /*
- * configuration/status of one particular disk
- */
- int major;
- int minor;
- int raid_disk;
- int state;
-
-} mdu_start_info_t;
-
-typedef struct mdu_bitmap_file_s
-{
- char pathname[4096];
-} mdu_bitmap_file_t;
-
-typedef struct mdu_param_s
-{
- int personality; /* 1,2,3,4 */
- int chunk_size; /* in bytes */
- int max_fault; /* unused for now */
-} mdu_param_t;
-
#endif
-
*/
unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc);
+/**
+ * ieee80211_get_mesh_hdrlen - get mesh extension header length
+ * @meshhdr: the mesh extension header, only the flags field
+ * (first byte) will be accessed
+ * Returns the length of the extension header, which is always at
+ * least 6 bytes and at most 18 if address 5 and 6 are present.
+ */
+unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
+
/**
* DOC: Data path helpers
*
int shutdown; /* this card is going down */
int free_on_last_close; /* free in context of file_release */
wait_queue_head_t shutdown_sleep;
+ atomic_t refcount; /* refcount for disconnection */
struct device *dev; /* device assigned to this card */
struct device *card_dev; /* cardX object for sysfs */
const struct file_operations *f_ops; /* file operations */
void *private_data; /* private data for f_ops->open */
struct device *dev; /* device for sysfs */
+ struct snd_card *card_ptr; /* assigned card instance */
};
/* return a device pointer linked to each sound device as a parent */
int snd_component_add(struct snd_card *card, const char *component);
int snd_card_file_add(struct snd_card *card, struct file *file);
int snd_card_file_remove(struct snd_card *card, struct file *file);
+void snd_card_unref(struct snd_card *card);
#define snd_card_set_dev(card, devptr) ((card)->dev = (devptr))
DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_pin);
DEFINE_XEN_MMU_PGD_EVENT(xen_mmu_pgd_unpin);
+TRACE_EVENT(xen_mmu_flush_tlb_all,
+ TP_PROTO(int x),
+ TP_ARGS(x),
+ TP_STRUCT__entry(__array(char, x, 0)),
+ TP_fast_assign((void)x),
+ TP_printk("%s", "")
+ );
+
TRACE_EVENT(xen_mmu_flush_tlb,
TP_PROTO(int x),
TP_ARGS(x),
# UAPI Header export list
+header-y += md_p.h
+header-y += md_u.h
--- /dev/null
+/*
+ md_p.h : physical layout of Linux RAID devices
+ Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ You should have received a copy of the GNU General Public License
+ (for example /usr/src/linux/COPYING); if not, write to the Free
+ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _MD_P_H
+#define _MD_P_H
+
+#include <linux/types.h>
+
+/*
+ * RAID superblock.
+ *
+ * The RAID superblock maintains some statistics on each RAID configuration.
+ * Each real device in the RAID set contains it near the end of the device.
+ * Some of the ideas are copied from the ext2fs implementation.
+ *
+ * We currently use 4096 bytes as follows:
+ *
+ * word offset function
+ *
+ * 0 - 31 Constant generic RAID device information.
+ * 32 - 63 Generic state information.
+ * 64 - 127 Personality specific information.
+ * 128 - 511 12 32-words descriptors of the disks in the raid set.
+ * 512 - 911 Reserved.
+ * 912 - 1023 Disk specific descriptor.
+ */
+
+/*
+ * If x is the real device size in bytes, we return an apparent size of:
+ *
+ * y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES
+ *
+ * and place the 4kB superblock at offset y.
+ */
+#define MD_RESERVED_BYTES (64 * 1024)
+#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512)
+
+#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)
+
+#define MD_SB_BYTES 4096
+#define MD_SB_WORDS (MD_SB_BYTES / 4)
+#define MD_SB_SECTORS (MD_SB_BYTES / 512)
+
+/*
+ * The following are counted in 32-bit words
+ */
+#define MD_SB_GENERIC_OFFSET 0
+#define MD_SB_PERSONALITY_OFFSET 64
+#define MD_SB_DISKS_OFFSET 128
+#define MD_SB_DESCRIPTOR_OFFSET 992
+
+#define MD_SB_GENERIC_CONSTANT_WORDS 32
+#define MD_SB_GENERIC_STATE_WORDS 32
+#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS)
+#define MD_SB_PERSONALITY_WORDS 64
+#define MD_SB_DESCRIPTOR_WORDS 32
+#define MD_SB_DISKS 27
+#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS)
+#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS)
+#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS)
+
+/*
+ * Device "operational" state bits
+ */
+#define MD_DISK_FAULTY 0 /* disk is faulty / operational */
+#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */
+#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */
+#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */
+
+#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config.
+ * read requests will only be sent here in
+ * dire need
+ */
+
+typedef struct mdp_device_descriptor_s {
+ __u32 number; /* 0 Device number in the entire set */
+ __u32 major; /* 1 Device major number */
+ __u32 minor; /* 2 Device minor number */
+ __u32 raid_disk; /* 3 The role of the device in the raid set */
+ __u32 state; /* 4 Operational state */
+ __u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5];
+} mdp_disk_t;
+
+#define MD_SB_MAGIC 0xa92b4efc
+
+/*
+ * Superblock state bits
+ */
+#define MD_SB_CLEAN 0
+#define MD_SB_ERRORS 1
+
+#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */
+
+/*
+ * Notes:
+ * - if an array is being reshaped (restriped) in order to change the
+ * the number of active devices in the array, 'raid_disks' will be
+ * the larger of the old and new numbers. 'delta_disks' will
+ * be the "new - old". So if +ve, raid_disks is the new value, and
+ * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the
+ * old value and "raid_disks+delta_disks" is the new (smaller) value.
+ */
+
+
+typedef struct mdp_superblock_s {
+ /*
+ * Constant generic information
+ */
+ __u32 md_magic; /* 0 MD identifier */
+ __u32 major_version; /* 1 major version to which the set conforms */
+ __u32 minor_version; /* 2 minor version ... */
+ __u32 patch_version; /* 3 patchlevel version ... */
+ __u32 gvalid_words; /* 4 Number of used words in this section */
+ __u32 set_uuid0; /* 5 Raid set identifier */
+ __u32 ctime; /* 6 Creation time */
+ __u32 level; /* 7 Raid personality */
+ __u32 size; /* 8 Apparent size of each individual disk */
+ __u32 nr_disks; /* 9 total disks in the raid set */
+ __u32 raid_disks; /* 10 disks in a fully functional raid set */
+ __u32 md_minor; /* 11 preferred MD minor device number */
+ __u32 not_persistent; /* 12 does it have a persistent superblock */
+ __u32 set_uuid1; /* 13 Raid set identifier #2 */
+ __u32 set_uuid2; /* 14 Raid set identifier #3 */
+ __u32 set_uuid3; /* 15 Raid set identifier #4 */
+ __u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16];
+
+ /*
+ * Generic state information
+ */
+ __u32 utime; /* 0 Superblock update time */
+ __u32 state; /* 1 State bits (clean, ...) */
+ __u32 active_disks; /* 2 Number of currently active disks */
+ __u32 working_disks; /* 3 Number of working disks */
+ __u32 failed_disks; /* 4 Number of failed disks */
+ __u32 spare_disks; /* 5 Number of spare disks */
+ __u32 sb_csum; /* 6 checksum of the whole superblock */
+#ifdef __BIG_ENDIAN
+ __u32 events_hi; /* 7 high-order of superblock update count */
+ __u32 events_lo; /* 8 low-order of superblock update count */
+ __u32 cp_events_hi; /* 9 high-order of checkpoint update count */
+ __u32 cp_events_lo; /* 10 low-order of checkpoint update count */
+#else
+ __u32 events_lo; /* 7 low-order of superblock update count */
+ __u32 events_hi; /* 8 high-order of superblock update count */
+ __u32 cp_events_lo; /* 9 low-order of checkpoint update count */
+ __u32 cp_events_hi; /* 10 high-order of checkpoint update count */
+#endif
+ __u32 recovery_cp; /* 11 recovery checkpoint sector count */
+ /* There are only valid for minor_version > 90 */
+ __u64 reshape_position; /* 12,13 next address in array-space for reshape */
+ __u32 new_level; /* 14 new level we are reshaping to */
+ __u32 delta_disks; /* 15 change in number of raid_disks */
+ __u32 new_layout; /* 16 new layout */
+ __u32 new_chunk; /* 17 new chunk size (bytes) */
+ __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18];
+
+ /*
+ * Personality information
+ */
+ __u32 layout; /* 0 the array's physical layout */
+ __u32 chunk_size; /* 1 chunk size in bytes */
+ __u32 root_pv; /* 2 LV root PV */
+ __u32 root_block; /* 3 LV root block */
+ __u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4];
+
+ /*
+ * Disks information
+ */
+ mdp_disk_t disks[MD_SB_DISKS];
+
+ /*
+ * Reserved
+ */
+ __u32 reserved[MD_SB_RESERVED_WORDS];
+
+ /*
+ * Active descriptor
+ */
+ mdp_disk_t this_disk;
+
+} mdp_super_t;
+
+static inline __u64 md_event(mdp_super_t *sb) {
+ __u64 ev = sb->events_hi;
+ return (ev<<32)| sb->events_lo;
+}
+
+#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1)
+
+/*
+ * The version-1 superblock :
+ * All numeric fields are little-endian.
+ *
+ * total size: 256 bytes plus 2 per device.
+ * 1K allows 384 devices.
+ */
+struct mdp_superblock_1 {
+ /* constant array information - 128 bytes */
+ __le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */
+ __le32 major_version; /* 1 */
+ __le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */
+ __le32 pad0; /* always set to 0 when writing */
+
+ __u8 set_uuid[16]; /* user-space generated. */
+ char set_name[32]; /* set and interpreted by user-space */
+
+ __le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/
+ __le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */
+ __le32 layout; /* only for raid5 and raid10 currently */
+ __le64 size; /* used size of component devices, in 512byte sectors */
+
+ __le32 chunksize; /* in 512byte sectors */
+ __le32 raid_disks;
+ __le32 bitmap_offset; /* sectors after start of superblock that bitmap starts
+ * NOTE: signed, so bitmap can be before superblock
+ * only meaningful of feature_map[0] is set.
+ */
+
+ /* These are only valid with feature bit '4' */
+ __le32 new_level; /* new level we are reshaping to */
+ __le64 reshape_position; /* next address in array-space for reshape */
+ __le32 delta_disks; /* change in number of raid_disks */
+ __le32 new_layout; /* new layout */
+ __le32 new_chunk; /* new chunk size (512byte sectors) */
+ __le32 new_offset; /* signed number to add to data_offset in new
+ * layout. 0 == no-change. This can be
+ * different on each device in the array.
+ */
+
+ /* constant this-device information - 64 bytes */
+ __le64 data_offset; /* sector start of data, often 0 */
+ __le64 data_size; /* sectors in this device that can be used for data */
+ __le64 super_offset; /* sector start of this superblock */
+ __le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */
+ __le32 dev_number; /* permanent identifier of this device - not role in raid */
+ __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */
+ __u8 device_uuid[16]; /* user-space setable, ignored by kernel */
+ __u8 devflags; /* per-device flags. Only one defined...*/
+#define WriteMostly1 1 /* mask for writemostly flag in above */
+ /* Bad block log. If there are any bad blocks the feature flag is set.
+ * If offset and size are non-zero, that space is reserved and available
+ */
+ __u8 bblog_shift; /* shift from sectors to block size */
+ __le16 bblog_size; /* number of sectors reserved for list */
+ __le32 bblog_offset; /* sector offset from superblock to bblog,
+ * signed - not unsigned */
+
+ /* array state information - 64 bytes */
+ __le64 utime; /* 40 bits second, 24 bits microseconds */
+ __le64 events; /* incremented when superblock updated */
+ __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */
+ __le32 sb_csum; /* checksum up to devs[max_dev] */
+ __le32 max_dev; /* size of devs[] array to consider */
+ __u8 pad3[64-32]; /* set to 0 when writing */
+
+ /* device state information. Indexed by dev_number.
+ * 2 bytes per device
+ * Note there are no per-device state flags. State information is rolled
+ * into the 'roles' value. If a device is spare or faulty, then it doesn't
+ * have a meaningful role.
+ */
+ __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */
+};
+
+/* feature_map bits */
+#define MD_FEATURE_BITMAP_OFFSET 1
+#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and
+ * must be honoured
+ */
+#define MD_FEATURE_RESHAPE_ACTIVE 4
+#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */
+#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an
+ * active device with same 'role'.
+ * 'recovery_offset' is also set.
+ */
+#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number
+ * of devices, but is going
+ * backwards anyway.
+ */
+#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */
+#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \
+ |MD_FEATURE_RECOVERY_OFFSET \
+ |MD_FEATURE_RESHAPE_ACTIVE \
+ |MD_FEATURE_BAD_BLOCKS \
+ |MD_FEATURE_REPLACEMENT \
+ |MD_FEATURE_RESHAPE_BACKWARDS \
+ |MD_FEATURE_NEW_OFFSET \
+ )
+
+#endif
--- /dev/null
+/*
+ md_u.h : user <=> kernel API between Linux raidtools and RAID drivers
+ Copyright (C) 1998 Ingo Molnar
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ You should have received a copy of the GNU General Public License
+ (for example /usr/src/linux/COPYING); if not, write to the Free
+ Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _UAPI_MD_U_H
+#define _UAPI_MD_U_H
+
+/*
+ * Different major versions are not compatible.
+ * Different minor versions are only downward compatible.
+ * Different patchlevel versions are downward and upward compatible.
+ */
+#define MD_MAJOR_VERSION 0
+#define MD_MINOR_VERSION 90
+/*
+ * MD_PATCHLEVEL_VERSION indicates kernel functionality.
+ * >=1 means different superblock formats are selectable using SET_ARRAY_INFO
+ * and major_version/minor_version accordingly
+ * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT
+ * in the super status byte
+ * >=3 means that bitmap superblock version 4 is supported, which uses
+ * little-ending representation rather than host-endian
+ */
+#define MD_PATCHLEVEL_VERSION 3
+
+/* ioctls */
+
+/* status */
+#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t)
+#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t)
+#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t)
+#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13)
+#define RAID_AUTORUN _IO (MD_MAJOR, 0x14)
+#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t)
+
+/* configuration */
+#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20)
+#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t)
+#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22)
+#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t)
+#define SET_DISK_INFO _IO (MD_MAJOR, 0x24)
+#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25)
+#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26)
+#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27)
+#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28)
+#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29)
+#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a)
+#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int)
+
+/* usage */
+#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t)
+/* 0x31 was START_ARRAY */
+#define STOP_ARRAY _IO (MD_MAJOR, 0x32)
+#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33)
+#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34)
+
+/* 63 partitions with the alternate major number (mdp) */
+#define MdpMinorShift 6
+
+typedef struct mdu_version_s {
+ int major;
+ int minor;
+ int patchlevel;
+} mdu_version_t;
+
+typedef struct mdu_array_info_s {
+ /*
+ * Generic constant information
+ */
+ int major_version;
+ int minor_version;
+ int patch_version;
+ int ctime;
+ int level;
+ int size;
+ int nr_disks;
+ int raid_disks;
+ int md_minor;
+ int not_persistent;
+
+ /*
+ * Generic state information
+ */
+ int utime; /* 0 Superblock update time */
+ int state; /* 1 State bits (clean, ...) */
+ int active_disks; /* 2 Number of currently active disks */
+ int working_disks; /* 3 Number of working disks */
+ int failed_disks; /* 4 Number of failed disks */
+ int spare_disks; /* 5 Number of spare disks */
+
+ /*
+ * Personality information
+ */
+ int layout; /* 0 the array's physical layout */
+ int chunk_size; /* 1 chunk size in bytes */
+
+} mdu_array_info_t;
+
+/* non-obvious values for 'level' */
+#define LEVEL_MULTIPATH (-4)
+#define LEVEL_LINEAR (-1)
+#define LEVEL_FAULTY (-5)
+
+/* we need a value for 'no level specified' and 0
+ * means 'raid0', so we need something else. This is
+ * for internal use only
+ */
+#define LEVEL_NONE (-1000000)
+
+typedef struct mdu_disk_info_s {
+ /*
+ * configuration/status of one particular disk
+ */
+ int number;
+ int major;
+ int minor;
+ int raid_disk;
+ int state;
+
+} mdu_disk_info_t;
+
+typedef struct mdu_start_info_s {
+ /*
+ * configuration/status of one particular disk
+ */
+ int major;
+ int minor;
+ int raid_disk;
+ int state;
+
+} mdu_start_info_t;
+
+typedef struct mdu_bitmap_file_s
+{
+ char pathname[4096];
+} mdu_bitmap_file_t;
+
+typedef struct mdu_param_s
+{
+ int personality; /* 1,2,3,4 */
+ int chunk_size; /* in bytes */
+ int max_fault; /* unused for now */
+} mdu_param_t;
+
+#endif /* _UAPI_MD_U_H */
{
}
+# if THREAD_SIZE >= PAGE_SIZE
void __init __weak thread_info_cache_init(void)
{
}
+#endif
/*
* Set up kernel memory allocators
mutex_unlock(&con->mutex);
return;
} else {
- con->ops->put(con);
dout("con_work %p FAILED to back off %lu\n", con,
con->delay);
+ set_bit(CON_FLAG_BACKOFF, &con->flags);
}
+ goto done;
}
if (con->state == CON_STATE_STANDBY) {
msg = con->ops->alloc_msg(con, hdr, skip);
mutex_lock(&con->mutex);
if (con->state != CON_STATE_OPEN) {
- ceph_msg_put(msg);
+ if (msg)
+ ceph_msg_put(msg);
return -EAGAIN;
}
con->in_msg = msg;
if ((ct->tuplehash[dir].tuple.src.u3.ip !=
ct->tuplehash[!dir].tuple.dst.u3.ip) ||
- (ct->tuplehash[dir].tuple.src.u.all !=
+ (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP &&
+ ct->tuplehash[dir].tuple.src.u.all !=
ct->tuplehash[!dir].tuple.dst.u.all))
if (nf_xfrm_me_harder(skb, AF_INET) < 0)
ret = NF_DROP;
}
#ifdef CONFIG_XFRM
else if (!(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
+ ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMP &&
ct->tuplehash[dir].tuple.dst.u.all !=
ct->tuplehash[!dir].tuple.src.u.all)
if (nf_xfrm_me_harder(skb, AF_INET) < 0)
.tcpv_rttcnt = ca->cnt_rtt,
.tcpv_minrtt = ca->base_rtt,
};
- u64 t = ca->sum_rtt;
- do_div(t, ca->cnt_rtt);
- info.tcpv_rtt = t;
+ if (info.tcpv_rttcnt > 0) {
+ u64 t = ca->sum_rtt;
+ do_div(t, info.tcpv_rttcnt);
+ info.tcpv_rtt = t;
+ }
nla_put(skb, INET_DIAG_VEGASINFO, sizeof(info), &info);
}
}
struct tcphdr *th;
bool fragstolen;
+ if (size == 0)
+ return 0;
+
skb = alloc_skb(size + sizeof(*th), sk->sk_allocation);
if (!skb)
goto err;
}
a = info->attrs[TCP_METRICS_ATTR_ADDR_IPV6];
if (a) {
- if (nla_len(a) != sizeof(sizeof(struct in6_addr)))
+ if (nla_len(a) != sizeof(struct in6_addr))
return -EINVAL;
addr->family = AF_INET6;
memcpy(addr->addr.a6, nla_data(a), sizeof(addr->addr.a6));
if (!nf_inet_addr_cmp(&ct->tuplehash[dir].tuple.src.u3,
&ct->tuplehash[!dir].tuple.dst.u3) ||
- (ct->tuplehash[dir].tuple.src.u.all !=
+ (ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 &&
+ ct->tuplehash[dir].tuple.src.u.all !=
ct->tuplehash[!dir].tuple.dst.u.all))
if (nf_xfrm_me_harder(skb, AF_INET6) < 0)
ret = NF_DROP;
}
#ifdef CONFIG_XFRM
else if (!(IP6CB(skb)->flags & IP6SKB_XFRM_TRANSFORMED) &&
+ ct->tuplehash[dir].tuple.dst.protonum != IPPROTO_ICMPV6 &&
ct->tuplehash[dir].tuple.dst.u.all !=
ct->tuplehash[!dir].tuple.src.u.all)
if (nf_xfrm_me_harder(skb, AF_INET6))
{ }
};
-static int __net_init nf_ct_frag6_sysctl_register(struct net *net)
+static int nf_ct_frag6_sysctl_register(struct net *net)
{
struct ctl_table *table;
struct ctl_table_header *hdr;
}
#else
-static int __net_init nf_ct_frag6_sysctl_register(struct net *net)
+static int nf_ct_frag6_sysctl_register(struct net *net)
{
return 0;
}
out_del_dev:
free_netdev(dev);
+ spriv->dev = NULL;
out_del_session:
l2tp_session_delete(session);
out:
sdata->u.ibss.state = IEEE80211_IBSS_MLME_SEARCH;
sdata->u.ibss.ibss_join_req = jiffies;
- memcpy(sdata->u.ibss.ssid, params->ssid, IEEE80211_MAX_SSID_LEN);
+ memcpy(sdata->u.ibss.ssid, params->ssid, params->ssid_len);
sdata->u.ibss.ssid_len = params->ssid_len;
mutex_unlock(&sdata->u.ibss.mtx);
if (ieee80211_is_action(hdr->frame_control)) {
u8 category;
+
+ /* make sure category field is present */
+ if (rx->skb->len < IEEE80211_MIN_ACTION_SIZE)
+ return RX_DROP_MONITOR;
+
mgmt = (struct ieee80211_mgmt *)hdr;
category = mgmt->u.action.category;
if (category != WLAN_CATEGORY_MESH_ACTION &&
*/
if (rx->sta && rx->sdata->vif.type == NL80211_IFTYPE_STATION &&
ieee80211_is_data_present(hdr->frame_control)) {
- u16 ethertype;
- u8 *payload;
-
- payload = rx->skb->data +
- ieee80211_hdrlen(hdr->frame_control);
- ethertype = (payload[6] << 8) | payload[7];
- if (cpu_to_be16(ethertype) ==
- rx->sdata->control_port_protocol)
+ unsigned int hdrlen;
+ __be16 ethertype;
+
+ hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+ if (rx->skb->len < hdrlen + 8)
+ return RX_DROP_MONITOR;
+
+ skb_copy_bits(rx->skb, hdrlen + 6, ðertype, 2);
+ if (ethertype == rx->sdata->control_port_protocol)
return RX_CONTINUE;
}
hdr = (struct ieee80211_hdr *)rx->skb->data;
fc = hdr->frame_control;
+
+ if (ieee80211_is_ctl(fc))
+ return RX_CONTINUE;
+
sc = le16_to_cpu(hdr->seq_ctrl);
frag = sc & IEEE80211_SCTL_FRAG;
if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
- (rx->skb)->len < 24 ||
is_multicast_ether_addr(hdr->addr1))) {
/* not fragmented */
goto out;
hdr = (struct ieee80211_hdr *) skb->data;
hdrlen = ieee80211_hdrlen(hdr->frame_control);
+
+ /* make sure fixed part of mesh header is there, also checks skb len */
+ if (!pskb_may_pull(rx->skb, hdrlen + 6))
+ return RX_DROP_MONITOR;
+
+ mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
+
+ /* make sure full mesh header is there, also checks skb len */
+ if (!pskb_may_pull(rx->skb,
+ hdrlen + ieee80211_get_mesh_hdrlen(mesh_hdr)))
+ return RX_DROP_MONITOR;
+
+ /* reload pointers */
+ hdr = (struct ieee80211_hdr *) skb->data;
mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
/* frame is in RMC, don't forward */
mesh_rmc_check(hdr->addr3, mesh_hdr, rx->sdata))
return RX_DROP_MONITOR;
- if (!ieee80211_is_data(hdr->frame_control))
+ if (!ieee80211_is_data(hdr->frame_control) ||
+ !(status->rx_flags & IEEE80211_RX_RA_MATCH))
return RX_CONTINUE;
if (!mesh_hdr->ttl)
if (is_multicast_ether_addr(hdr->addr1)) {
mpp_addr = hdr->addr3;
proxied_addr = mesh_hdr->eaddr1;
- } else {
+ } else if (mesh_hdr->flags & MESH_FLAGS_AE_A5_A6) {
+ /* has_a4 already checked in ieee80211_rx_mesh_check */
mpp_addr = hdr->addr4;
proxied_addr = mesh_hdr->eaddr2;
+ } else {
+ return RX_DROP_MONITOR;
}
rcu_read_lock();
}
skb_set_queue_mapping(skb, q);
- if (!(status->rx_flags & IEEE80211_RX_RA_MATCH))
- goto out;
-
if (!--mesh_hdr->ttl) {
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_ttl);
- return RX_DROP_MONITOR;
+ goto out;
}
if (!ifmsh->mshcfg.dot11MeshForwarding)
}
break;
case WLAN_CATEGORY_SELF_PROTECTED:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.self_prot.action_code)))
+ break;
+
switch (mgmt->u.action.u.self_prot.action_code) {
case WLAN_SP_MESH_PEERING_OPEN:
case WLAN_SP_MESH_PEERING_CLOSE:
}
break;
case WLAN_CATEGORY_MESH_ACTION:
+ if (len < (IEEE80211_MIN_ACTION_SIZE +
+ sizeof(mgmt->u.action.u.mesh_action.action_code)))
+ break;
+
if (!ieee80211_vif_is_mesh(&sdata->vif))
break;
if (mesh_action_is_path_sel(mgmt) &&
if (ieee80211_is_data(fc) || ieee80211_is_mgmt(fc))
local->dot11ReceivedFragmentCount++;
- if (ieee80211_is_mgmt(fc))
- err = skb_linearize(skb);
- else
+ if (ieee80211_is_mgmt(fc)) {
+ /* drop frame if too short for header */
+ if (skb->len < ieee80211_hdrlen(fc))
+ err = -ENOBUFS;
+ else
+ err = skb_linearize(skb);
+ } else {
err = !pskb_may_pull(skb, ieee80211_hdrlen(fc));
+ }
if (err) {
dev_kfree_skb(skb);
break;
}
- if (id != WLAN_EID_VENDOR_SPECIFIC &&
- id != WLAN_EID_QUIET &&
- test_bit(id, seen_elems)) {
- elems->parse_error = true;
- left -= elen;
- pos += elen;
- continue;
+ switch (id) {
+ case WLAN_EID_SSID:
+ case WLAN_EID_SUPP_RATES:
+ case WLAN_EID_FH_PARAMS:
+ case WLAN_EID_DS_PARAMS:
+ case WLAN_EID_CF_PARAMS:
+ case WLAN_EID_TIM:
+ case WLAN_EID_IBSS_PARAMS:
+ case WLAN_EID_CHALLENGE:
+ case WLAN_EID_RSN:
+ case WLAN_EID_ERP_INFO:
+ case WLAN_EID_EXT_SUPP_RATES:
+ case WLAN_EID_HT_CAPABILITY:
+ case WLAN_EID_HT_OPERATION:
+ case WLAN_EID_VHT_CAPABILITY:
+ case WLAN_EID_VHT_OPERATION:
+ case WLAN_EID_MESH_ID:
+ case WLAN_EID_MESH_CONFIG:
+ case WLAN_EID_PEER_MGMT:
+ case WLAN_EID_PREQ:
+ case WLAN_EID_PREP:
+ case WLAN_EID_PERR:
+ case WLAN_EID_RANN:
+ case WLAN_EID_CHANNEL_SWITCH:
+ case WLAN_EID_EXT_CHANSWITCH_ANN:
+ case WLAN_EID_COUNTRY:
+ case WLAN_EID_PWR_CONSTRAINT:
+ case WLAN_EID_TIMEOUT_INTERVAL:
+ if (test_bit(id, seen_elems)) {
+ elems->parse_error = true;
+ left -= elen;
+ pos += elen;
+ continue;
+ }
+ break;
}
if (calc_crc && id < 64 && (filter & (1ULL << id)))
flowi4_to_flowi(&fl1), false)) {
if (!afinfo->route(&init_net, (struct dst_entry **)&rt2,
flowi4_to_flowi(&fl2), false)) {
- if (rt1->rt_gateway == rt2->rt_gateway &&
+ if (rt_nexthop(rt1, fl1.daddr) ==
+ rt_nexthop(rt2, fl2.daddr) &&
rt1->dst.dev == rt2->dst.dev)
ret = 1;
dst_release(&rt2->dst);
void *addr_buf;
struct sctp_af *af;
- SCTP_DEBUG_PRINTK("sctp_setsocktopt_bindx: sk %p addrs %p"
+ SCTP_DEBUG_PRINTK("sctp_setsockopt_bindx: sk %p addrs %p"
" addrs_size %d opt %d\n", sk, addrs, addrs_size, op);
if (unlikely(addrs_size <= 0))
xprt_free_allocation(req);
dprintk("RPC: setup backchannel transport failed\n");
- return -1;
+ return -ENOMEM;
}
EXPORT_SYMBOL_GPL(xprt_setup_backchannel);
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
sband->channels[i].flags;
- sband->channels[i].orig_mag =
- sband->channels[i].max_antenna_gain;
+ sband->channels[i].orig_mag = INT_MAX;
sband->channels[i].orig_mpwr =
sband->channels[i].max_power;
sband->channels[i].band = band;
map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = chan->orig_mag =
(int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_power = chan->orig_mpwr =
+ chan->max_reg_power = chan->max_power = chan->orig_mpwr =
(int) MBM_TO_DBM(power_rule->max_eirp);
return;
}
chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
+ chan->max_reg_power = chan->max_power =
+ (int) MBM_TO_DBM(power_rule->max_eirp);
}
static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band,
}
EXPORT_SYMBOL(ieee80211_get_hdrlen_from_skb);
-static int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
+unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr)
{
int ae = meshhdr->flags & MESH_FLAGS_AE;
- /* 7.1.3.5a.2 */
+ /* 802.11-2012, 8.2.4.7.3 */
switch (ae) {
+ default:
case 0:
return 6;
case MESH_FLAGS_AE_A4:
return 12;
case MESH_FLAGS_AE_A5_A6:
return 18;
- case (MESH_FLAGS_AE_A4 | MESH_FLAGS_AE_A5_A6):
- return 24;
- default:
- return 6;
}
}
+EXPORT_SYMBOL(ieee80211_get_mesh_hdrlen);
int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr,
enum nl80211_iftype iftype)
/* make sure meshdr->flags is on the linear part */
if (!pskb_may_pull(skb, hdrlen + 1))
return -1;
+ if (meshdr->flags & MESH_FLAGS_AE_A4)
+ return -1;
if (meshdr->flags & MESH_FLAGS_AE_A5_A6) {
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
/* make sure meshdr->flags is on the linear part */
if (!pskb_may_pull(skb, hdrlen + 1))
return -1;
+ if (meshdr->flags & MESH_FLAGS_AE_A5_A6)
+ return -1;
if (meshdr->flags & MESH_FLAGS_AE_A4)
skb_copy_bits(skb, hdrlen +
offsetof(struct ieee80211s_hdr, eaddr1),
if (dirn != compr->direction) {
pr_err("this device doesn't support this direction\n");
+ snd_card_unref(compr->card);
return -EINVAL;
}
data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data)
+ if (!data) {
+ snd_card_unref(compr->card);
return -ENOMEM;
+ }
data->stream.ops = compr->ops;
data->stream.direction = dirn;
data->stream.private_data = compr->private_data;
runtime = kzalloc(sizeof(*runtime), GFP_KERNEL);
if (!runtime) {
kfree(data);
+ snd_card_unref(compr->card);
return -ENOMEM;
}
runtime->state = SNDRV_PCM_STATE_OPEN;
kfree(runtime);
kfree(data);
}
- return ret;
+ snd_card_unref(compr->card);
+ return 0;
}
static int snd_compr_free(struct inode *inode, struct file *f)
write_lock_irqsave(&card->ctl_files_rwlock, flags);
list_add_tail(&ctl->list, &card->ctl_files);
write_unlock_irqrestore(&card->ctl_files_rwlock, flags);
+ snd_card_unref(card);
return 0;
__error:
__error2:
snd_card_file_remove(card, file);
__error1:
+ if (card)
+ snd_card_unref(card);
return err;
}
spin_unlock_irq(&ctl->read_lock);
schedule();
remove_wait_queue(&ctl->change_sleep, &wait);
+ if (ctl->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return -ERESTARTSYS;
spin_lock_irq(&ctl->read_lock);
if (hw == NULL)
return -ENODEV;
- if (!try_module_get(hw->card->module))
+ if (!try_module_get(hw->card->module)) {
+ snd_card_unref(hw->card);
return -EFAULT;
+ }
init_waitqueue_entry(&wait, current);
add_wait_queue(&hw->open_wait, &wait);
mutex_unlock(&hw->open_mutex);
schedule();
mutex_lock(&hw->open_mutex);
+ if (hw->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
mutex_unlock(&hw->open_mutex);
if (err < 0)
module_put(hw->card->module);
+ snd_card_unref(hw->card);
return err;
}
mutex_unlock(®ister_mutex);
return -EINVAL;
}
+ mutex_lock(&hwdep->open_mutex);
+ wake_up(&hwdep->open_wait);
#ifdef CONFIG_SND_OSSEMUL
if (hwdep->ossreg)
snd_unregister_oss_device(hwdep->oss_type, hwdep->card, hwdep->device);
#endif
snd_unregister_device(SNDRV_DEVICE_TYPE_HWDEP, hwdep->card, hwdep->device);
list_del_init(&hwdep->list);
+ mutex_unlock(&hwdep->open_mutex);
mutex_unlock(®ister_mutex);
return 0;
}
spin_lock_init(&card->files_lock);
INIT_LIST_HEAD(&card->files_list);
init_waitqueue_head(&card->shutdown_sleep);
+ atomic_set(&card->refcount, 0);
#ifdef CONFIG_PM
mutex_init(&card->power_lock);
init_waitqueue_head(&card->power_sleep);
return 0;
}
+/**
+ * snd_card_unref - release the reference counter
+ * @card: the card instance
+ *
+ * Decrements the reference counter. When it reaches to zero, wake up
+ * the sleeper and call the destructor if needed.
+ */
+void snd_card_unref(struct snd_card *card)
+{
+ if (atomic_dec_and_test(&card->refcount)) {
+ wake_up(&card->shutdown_sleep);
+ if (card->free_on_last_close)
+ snd_card_do_free(card);
+ }
+}
+EXPORT_SYMBOL(snd_card_unref);
+
int snd_card_free_when_closed(struct snd_card *card)
{
- int free_now = 0;
- int ret = snd_card_disconnect(card);
- if (ret)
- return ret;
+ int ret;
- spin_lock(&card->files_lock);
- if (list_empty(&card->files_list))
- free_now = 1;
- else
- card->free_on_last_close = 1;
- spin_unlock(&card->files_lock);
+ atomic_inc(&card->refcount);
+ ret = snd_card_disconnect(card);
+ if (ret) {
+ atomic_dec(&card->refcount);
+ return ret;
+ }
- if (free_now)
+ card->free_on_last_close = 1;
+ if (atomic_dec_and_test(&card->refcount))
snd_card_do_free(card);
return 0;
}
return ret;
/* wait, until all devices are ready for the free operation */
- wait_event(card->shutdown_sleep, list_empty(&card->files_list));
+ wait_event(card->shutdown_sleep, !atomic_read(&card->refcount));
snd_card_do_free(card);
return 0;
}
return -ENODEV;
}
list_add(&mfile->list, &card->files_list);
+ atomic_inc(&card->refcount);
spin_unlock(&card->files_lock);
return 0;
}
int snd_card_file_remove(struct snd_card *card, struct file *file)
{
struct snd_monitor_file *mfile, *found = NULL;
- int last_close = 0;
spin_lock(&card->files_lock);
list_for_each_entry(mfile, &card->files_list, list) {
break;
}
}
- if (list_empty(&card->files_list))
- last_close = 1;
spin_unlock(&card->files_lock);
- if (last_close) {
- wake_up(&card->shutdown_sleep);
- if (card->free_on_last_close)
- snd_card_do_free(card);
- }
if (!found) {
snd_printk(KERN_ERR "ALSA card file remove problem (%p)\n", file);
return -ENOENT;
}
kfree(found);
+ snd_card_unref(card);
return 0;
}
SNDRV_OSS_DEVICE_TYPE_MIXER);
if (card == NULL)
return -ENODEV;
- if (card->mixer_oss == NULL)
+ if (card->mixer_oss == NULL) {
+ snd_card_unref(card);
return -ENODEV;
+ }
err = snd_card_file_add(card, file);
- if (err < 0)
+ if (err < 0) {
+ snd_card_unref(card);
return err;
+ }
fmixer = kzalloc(sizeof(*fmixer), GFP_KERNEL);
if (fmixer == NULL) {
snd_card_file_remove(card, file);
+ snd_card_unref(card);
return -ENOMEM;
}
fmixer->card = card;
if (!try_module_get(card->module)) {
kfree(fmixer);
snd_card_file_remove(card, file);
+ snd_card_unref(card);
return -EFAULT;
}
return 0;
mutex_unlock(&pcm->open_mutex);
schedule();
mutex_lock(&pcm->open_mutex);
+ if (pcm->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
__error2:
snd_card_file_remove(pcm->card, file);
__error1:
+ if (pcm)
+ snd_card_unref(pcm->card);
return err;
}
if (list_empty(&pcm->list))
goto unlock;
+ mutex_lock(&pcm->open_mutex);
+ wake_up(&pcm->open_wait);
list_del_init(&pcm->list);
for (cidx = 0; cidx < 2; cidx++)
- for (substream = pcm->streams[cidx].substream; substream; substream = substream->next)
- if (substream->runtime)
+ for (substream = pcm->streams[cidx].substream; substream; substream = substream->next) {
+ snd_pcm_stream_lock_irq(substream);
+ if (substream->runtime) {
substream->runtime->status->state = SNDRV_PCM_STATE_DISCONNECTED;
+ wake_up(&substream->runtime->sleep);
+ wake_up(&substream->runtime->tsleep);
+ }
+ snd_pcm_stream_unlock_irq(substream);
+ }
list_for_each_entry(notify, &snd_pcm_notify_list, list) {
notify->n_disconnect(pcm);
}
pcm->streams[cidx].chmap_kctl = NULL;
}
}
+ mutex_unlock(&pcm->open_mutex);
unlock:
mutex_unlock(®ister_mutex);
return 0;
return usecs;
}
+static void snd_pcm_set_state(struct snd_pcm_substream *substream, int state)
+{
+ snd_pcm_stream_lock_irq(substream);
+ if (substream->runtime->status->state != SNDRV_PCM_STATE_DISCONNECTED)
+ substream->runtime->status->state = state;
+ snd_pcm_stream_unlock_irq(substream);
+}
+
static int snd_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
runtime->boundary *= 2;
snd_pcm_timer_resolution_change(substream);
- runtime->status->state = SNDRV_PCM_STATE_SETUP;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_SETUP);
if (pm_qos_request_active(&substream->latency_pm_qos_req))
pm_qos_remove_request(&substream->latency_pm_qos_req);
/* hardware might be unusable from this time,
so we force application to retry to set
the correct hardware parameter settings */
- runtime->status->state = SNDRV_PCM_STATE_OPEN;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
if (substream->ops->hw_free != NULL)
substream->ops->hw_free(substream);
return err;
return -EBADFD;
if (substream->ops->hw_free)
result = substream->ops->hw_free(substream);
- runtime->status->state = SNDRV_PCM_STATE_OPEN;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_OPEN);
pm_qos_remove_request(&substream->latency_pm_qos_req);
return result;
}
{
struct snd_pcm_runtime *runtime = substream->runtime;
runtime->control->appl_ptr = runtime->status->hw_ptr;
- runtime->status->state = SNDRV_PCM_STATE_PREPARED;
+ snd_pcm_set_state(substream, SNDRV_PCM_STATE_PREPARED);
}
static struct action_ops snd_pcm_action_prepare = {
down_read(&snd_pcm_link_rwsem);
snd_pcm_stream_lock_irq(substream);
remove_wait_queue(&to_check->sleep, &wait);
+ if (card->shutdown) {
+ result = -ENODEV;
+ break;
+ }
if (tout == 0) {
if (substream->runtime->status->state == SNDRV_PCM_STATE_SUSPENDED)
result = -ESTRPIPE;
write_unlock_irq(&snd_pcm_link_rwlock);
up_write(&snd_pcm_link_rwsem);
_nolock:
+ snd_card_unref(substream1->pcm->card);
fput_light(file, fput_needed);
if (res < 0)
kfree(group);
return err;
pcm = snd_lookup_minor_data(iminor(inode),
SNDRV_DEVICE_TYPE_PCM_PLAYBACK);
- return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK);
+ err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_PLAYBACK);
+ snd_card_unref(pcm->card);
+ return err;
}
static int snd_pcm_capture_open(struct inode *inode, struct file *file)
return err;
pcm = snd_lookup_minor_data(iminor(inode),
SNDRV_DEVICE_TYPE_PCM_CAPTURE);
- return snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE);
+ err = snd_pcm_open(file, pcm, SNDRV_PCM_STREAM_CAPTURE);
+ snd_card_unref(pcm->card);
+ return err;
}
static int snd_pcm_open(struct file *file, struct snd_pcm *pcm, int stream)
mutex_unlock(&pcm->open_mutex);
schedule();
mutex_lock(&pcm->open_mutex);
+ if (pcm->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
if (rmidi == NULL)
return -ENODEV;
- if (!try_module_get(rmidi->card->module))
+ if (!try_module_get(rmidi->card->module)) {
+ snd_card_unref(rmidi->card);
return -ENXIO;
+ }
mutex_lock(&rmidi->open_mutex);
card = rmidi->card;
mutex_unlock(&rmidi->open_mutex);
schedule();
mutex_lock(&rmidi->open_mutex);
+ if (rmidi->card->shutdown) {
+ err = -ENODEV;
+ break;
+ }
if (signal_pending(current)) {
err = -ERESTARTSYS;
break;
#endif
file->private_data = rawmidi_file;
mutex_unlock(&rmidi->open_mutex);
+ snd_card_unref(rmidi->card);
return 0;
__error:
__error_card:
mutex_unlock(&rmidi->open_mutex);
module_put(rmidi->card->module);
+ snd_card_unref(rmidi->card);
return err;
}
spin_unlock_irq(&runtime->lock);
schedule();
remove_wait_queue(&runtime->sleep, &wait);
+ if (rfile->rmidi->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return result > 0 ? result : -ERESTARTSYS;
if (!runtime->avail)
spin_unlock_irq(&runtime->lock);
timeout = schedule_timeout(30 * HZ);
remove_wait_queue(&runtime->sleep, &wait);
+ if (rfile->rmidi->card->shutdown)
+ return -ENODEV;
if (signal_pending(current))
return result > 0 ? result : -ERESTARTSYS;
if (!runtime->avail && !timeout)
static int snd_rawmidi_dev_disconnect(struct snd_device *device)
{
struct snd_rawmidi *rmidi = device->device_data;
+ int dir;
mutex_lock(®ister_mutex);
+ mutex_lock(&rmidi->open_mutex);
+ wake_up(&rmidi->open_wait);
list_del_init(&rmidi->list);
+ for (dir = 0; dir < 2; dir++) {
+ struct snd_rawmidi_substream *s;
+ list_for_each_entry(s, &rmidi->streams[dir].substreams, list) {
+ if (s->runtime)
+ wake_up(&s->runtime->sleep);
+ }
+ }
+
#ifdef CONFIG_SND_OSSEMUL
if (rmidi->ossreg) {
if ((int)rmidi->device == midi_map[rmidi->card->number]) {
}
#endif /* CONFIG_SND_OSSEMUL */
snd_unregister_device(SNDRV_DEVICE_TYPE_RAWMIDI, rmidi->card, rmidi->device);
+ mutex_unlock(&rmidi->open_mutex);
mutex_unlock(®ister_mutex);
return 0;
}
*
* Checks that a minor device with the specified type is registered, and returns
* its user data pointer.
+ *
+ * This function increments the reference counter of the card instance
+ * if an associated instance with the given minor number and type is found.
+ * The caller must call snd_card_unref() appropriately later.
*/
void *snd_lookup_minor_data(unsigned int minor, int type)
{
return NULL;
mutex_lock(&sound_mutex);
mreg = snd_minors[minor];
- if (mreg && mreg->type == type)
+ if (mreg && mreg->type == type) {
private_data = mreg->private_data;
- else
+ if (mreg->card_ptr)
+ atomic_inc(&mreg->card_ptr->refcount);
+ } else
private_data = NULL;
mutex_unlock(&sound_mutex);
return private_data;
preg->device = dev;
preg->f_ops = f_ops;
preg->private_data = private_data;
+ preg->card_ptr = card;
mutex_lock(&sound_mutex);
#ifdef CONFIG_SND_DYNAMIC_MINORS
minor = snd_find_free_minor(type);
static struct snd_minor *snd_oss_minors[SNDRV_OSS_MINORS];
static DEFINE_MUTEX(sound_oss_mutex);
+/* NOTE: This function increments the refcount of the associated card like
+ * snd_lookup_minor_data(); the caller must call snd_card_unref() appropriately
+ */
void *snd_lookup_oss_minor_data(unsigned int minor, int type)
{
struct snd_minor *mreg;
return NULL;
mutex_lock(&sound_oss_mutex);
mreg = snd_oss_minors[minor];
- if (mreg && mreg->type == type)
+ if (mreg && mreg->type == type) {
private_data = mreg->private_data;
- else
+ if (mreg->card_ptr)
+ atomic_inc(&mreg->card_ptr->refcount);
+ } else
private_data = NULL;
mutex_unlock(&sound_oss_mutex);
return private_data;
preg->device = dev;
preg->f_ops = f_ops;
preg->private_data = private_data;
+ preg->card_ptr = card;
mutex_lock(&sound_oss_mutex);
snd_oss_minors[minor] = preg;
minor_unit = SNDRV_MINOR_OSS_DEVICE(minor);
"HP", STAC_HP_ZEPHYR),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3660,
"HP Mini", STAC_92HD83XXX_HP_LED),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x144E,
+ "HP Pavilion dv5", STAC_92HD83XXX_HP_INV_LED),
{} /* terminator */
};
ice->set_spdif_clock(ice, 0);
} else {
/* internal on-card clock */
- snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1);
+ int rate;
+ if (ice->cur_rate)
+ rate = ice->cur_rate;
+ else
+ rate = ice->pro_rate_default;
+ snd_vt1724_set_pro_rate(ice, rate, 1);
}
update_spdif_bits(ice, ice->pm_saved_spdif_ctrl);
mutex_init(&dmic->mutex);
- dmic->fclk = clk_get(dmic->dev, "dmic_fck");
+ dmic->fclk = clk_get(dmic->dev, "fck");
if (IS_ERR(dmic->fclk)) {
- dev_err(dmic->dev, "cant get dmic_fck\n");
+ dev_err(dmic->dev, "cant get fck\n");
return -ENODEV;
}
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/board-zoom.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/gpio-omap.h>
/* Register descriptions for twl4030 codec part */
#include <linux/mfd/twl4030-audio.h>
}
mutex_init(&chip->mutex);
- mutex_init(&chip->shutdown_mutex);
+ init_rwsem(&chip->shutdown_rwsem);
chip->index = idx;
chip->dev = dev;
chip->card = card;
card = chip->card;
mutex_lock(®ister_mutex);
- mutex_lock(&chip->shutdown_mutex);
+ down_write(&chip->shutdown_rwsem);
chip->shutdown = 1;
chip->num_interfaces--;
if (chip->num_interfaces <= 0) {
snd_usb_mixer_disconnect(p);
}
usb_chip[chip->index] = NULL;
- mutex_unlock(&chip->shutdown_mutex);
+ up_write(&chip->shutdown_rwsem);
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
} else {
- mutex_unlock(&chip->shutdown_mutex);
+ up_write(&chip->shutdown_rwsem);
mutex_unlock(®ister_mutex);
}
}
{
int err = -ENODEV;
+ down_read(&chip->shutdown_rwsem);
if (!chip->shutdown && !chip->probing)
err = usb_autopm_get_interface(chip->pm_intf);
+ up_read(&chip->shutdown_rwsem);
return err;
}
void snd_usb_autosuspend(struct snd_usb_audio *chip)
{
+ down_read(&chip->shutdown_rwsem);
if (!chip->shutdown && !chip->probing)
usb_autopm_put_interface(chip->pm_intf);
+ up_read(&chip->shutdown_rwsem);
}
static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message)
struct snd_usb_endpoint *sync_endpoint;
unsigned long flags;
bool need_setup_ep; /* (re)configure EP at prepare? */
+ unsigned int speed; /* USB_SPEED_XXX */
u64 formats; /* format bitmasks (all or'ed) */
unsigned int num_formats; /* number of supported audio formats (list) */
unsigned char buf[2];
int val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
int timeout = 10;
- int err;
+ int idx = 0, err;
err = snd_usb_autoresume(cval->mixer->chip);
if (err < 0)
return -EIO;
+ down_read(&chip->shutdown_rwsem);
while (timeout-- > 0) {
+ if (chip->shutdown)
+ break;
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
if (snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len) >= val_len) {
+ validx, idx, buf, val_len) >= val_len) {
*value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len));
- snd_usb_autosuspend(cval->mixer->chip);
- return 0;
+ err = 0;
+ goto out;
}
}
- snd_usb_autosuspend(cval->mixer->chip);
snd_printdd(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type);
- return -EINVAL;
+ request, validx, idx, cval->val_type);
+ err = -EINVAL;
+
+ out:
+ up_read(&chip->shutdown_rwsem);
+ snd_usb_autosuspend(cval->mixer->chip);
+ return err;
}
static int get_ctl_value_v2(struct usb_mixer_elem_info *cval, int request, int validx, int *value_ret)
struct snd_usb_audio *chip = cval->mixer->chip;
unsigned char buf[2 + 3*sizeof(__u16)]; /* enough space for one range */
unsigned char *val;
- int ret, size;
+ int idx = 0, ret, size;
__u8 bRequest;
if (request == UAC_GET_CUR) {
if (ret)
goto error;
- ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
+ down_read(&chip->shutdown_rwsem);
+ if (chip->shutdown)
+ ret = -ENODEV;
+ else {
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
+ ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), bRequest,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, size);
+ validx, idx, buf, size);
+ }
+ up_read(&chip->shutdown_rwsem);
snd_usb_autosuspend(chip);
if (ret < 0) {
error:
snd_printk(KERN_ERR "cannot get ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type);
+ request, validx, idx, cval->val_type);
return ret;
}
{
struct snd_usb_audio *chip = cval->mixer->chip;
unsigned char buf[2];
- int val_len, err, timeout = 10;
+ int idx = 0, val_len, err, timeout = 10;
if (cval->mixer->protocol == UAC_VERSION_1) {
val_len = cval->val_type >= USB_MIXER_S16 ? 2 : 1;
err = snd_usb_autoresume(chip);
if (err < 0)
return -EIO;
- while (timeout-- > 0)
+ down_read(&chip->shutdown_rwsem);
+ while (timeout-- > 0) {
+ if (chip->shutdown)
+ break;
+ idx = snd_usb_ctrl_intf(chip) | (cval->id << 8);
if (snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), request,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
- validx, snd_usb_ctrl_intf(chip) | (cval->id << 8),
- buf, val_len) >= 0) {
- snd_usb_autosuspend(chip);
- return 0;
+ validx, idx, buf, val_len) >= 0) {
+ err = 0;
+ goto out;
}
- snd_usb_autosuspend(chip);
+ }
snd_printdd(KERN_ERR "cannot set ctl value: req = %#x, wValue = %#x, wIndex = %#x, type = %d, data = %#x/%#x\n",
- request, validx, snd_usb_ctrl_intf(chip) | (cval->id << 8), cval->val_type, buf[0], buf[1]);
- return -EINVAL;
+ request, validx, idx, cval->val_type, buf[0], buf[1]);
+ err = -EINVAL;
+
+ out:
+ up_read(&chip->shutdown_rwsem);
+ snd_usb_autosuspend(chip);
+ return err;
}
static int set_cur_ctl_value(struct usb_mixer_elem_info *cval, int validx, int value)
if (value > 1)
return -EINVAL;
changed = value != mixer->audigy2nx_leds[index];
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown) {
+ err = -ENODEV;
+ goto out;
+ }
if (mixer->chip->usb_id == USB_ID(0x041e, 0x3042))
err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x24,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
value, index + 2, NULL, 0);
+ out:
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
mixer->audigy2nx_leds[index] = value;
for (i = 0; jacks[i].name; ++i) {
snd_iprintf(buffer, "%s: ", jacks[i].name);
- err = snd_usb_ctl_msg(mixer->chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = 0;
+ else
+ err = snd_usb_ctl_msg(mixer->chip->dev,
usb_rcvctrlpipe(mixer->chip->dev, 0),
UAC_GET_MEM, USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, 0,
jacks[i].unitid << 8, buf, 3);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err == 3 && (buf[0] == 3 || buf[0] == 6))
snd_iprintf(buffer, "%02x %02x\n", buf[1], buf[2]);
else
else
new_status = old_status & ~0x02;
changed = new_status != old_status;
- err = snd_usb_ctl_msg(mixer->chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(mixer->chip->dev,
usb_sndctrlpipe(mixer->chip->dev, 0), 0x08,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
50, 0, &new_status, 1);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
mixer->xonar_u1_status = new_status;
u8 bRequest = (kcontrol->private_value >> 16) & 0xff;
u16 wIndex = kcontrol->private_value & 0xffff;
u8 tmp;
+ int ret;
- int ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0, cpu_to_le16(wIndex),
&tmp, sizeof(tmp), 1000);
+ up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
snd_printk(KERN_ERR
u8 bRequest = (kcontrol->private_value >> 16) & 0xff;
u16 wIndex = kcontrol->private_value & 0xffff;
u16 wValue = ucontrol->value.integer.value[0];
+ int ret;
- int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), bRequest,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
cpu_to_le16(wValue), cpu_to_le16(wIndex),
NULL, 0, 1000);
+ up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
snd_printk(KERN_ERR
return -EINVAL;
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
if (!pval->is_cached) {
/* Read current value */
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_rcvctrlpipe(chip->dev, 0), UAC_GET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
if (cur_val != new_val) {
value[0] = new_val;
value[1] = 0;
- err = snd_usb_ctl_msg(chip->dev,
+ down_read(&mixer->chip->shutdown_rwsem);
+ if (mixer->chip->shutdown)
+ err = -ENODEV;
+ else
+ err = snd_usb_ctl_msg(chip->dev,
usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR,
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
validx << 8, snd_usb_ctrl_intf(chip) | (id << 8),
value, val_len);
+ up_read(&mixer->chip->shutdown_rwsem);
if (err < 0)
return err;
unsigned int hwptr_done;
subs = (struct snd_usb_substream *)substream->runtime->private_data;
+ if (subs->stream->chip->shutdown)
+ return SNDRV_PCM_POS_XRUN;
spin_lock(&subs->lock);
hwptr_done = subs->hwptr_done;
substream->runtime->delay = snd_usb_pcm_delay(subs,
{
int ret;
- mutex_lock(&subs->stream->chip->shutdown_mutex);
/* format changed */
stop_endpoints(subs, 0, 0, 0);
ret = snd_usb_endpoint_set_params(subs->data_endpoint,
subs->cur_audiofmt,
subs->sync_endpoint);
if (ret < 0)
- goto unlock;
+ return ret;
if (subs->sync_endpoint)
ret = snd_usb_endpoint_set_params(subs->data_endpoint,
subs->cur_rate,
subs->cur_audiofmt,
NULL);
-
-unlock:
- mutex_unlock(&subs->stream->chip->shutdown_mutex);
return ret;
}
return -EINVAL;
}
- if ((ret = set_format(subs, fmt)) < 0)
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (subs->stream->chip->shutdown)
+ ret = -ENODEV;
+ else
+ ret = set_format(subs, fmt);
+ up_read(&subs->stream->chip->shutdown_rwsem);
+ if (ret < 0)
return ret;
subs->interface = fmt->iface;
subs->cur_audiofmt = NULL;
subs->cur_rate = 0;
subs->period_bytes = 0;
- mutex_lock(&subs->stream->chip->shutdown_mutex);
- stop_endpoints(subs, 0, 1, 1);
- deactivate_endpoints(subs);
- mutex_unlock(&subs->stream->chip->shutdown_mutex);
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (!subs->stream->chip->shutdown) {
+ stop_endpoints(subs, 0, 1, 1);
+ deactivate_endpoints(subs);
+ }
+ up_read(&subs->stream->chip->shutdown_rwsem);
return snd_pcm_lib_free_vmalloc_buffer(substream);
}
return -ENXIO;
}
- if (snd_BUG_ON(!subs->data_endpoint))
- return -EIO;
+ down_read(&subs->stream->chip->shutdown_rwsem);
+ if (subs->stream->chip->shutdown) {
+ ret = -ENODEV;
+ goto unlock;
+ }
+ if (snd_BUG_ON(!subs->data_endpoint)) {
+ ret = -EIO;
+ goto unlock;
+ }
ret = set_format(subs, subs->cur_audiofmt);
if (ret < 0)
- return ret;
+ goto unlock;
iface = usb_ifnum_to_if(subs->dev, subs->cur_audiofmt->iface);
alts = &iface->altsetting[subs->cur_audiofmt->altset_idx];
subs->cur_audiofmt,
subs->cur_rate);
if (ret < 0)
- return ret;
+ goto unlock;
if (subs->need_setup_ep) {
ret = configure_endpoint(subs);
if (ret < 0)
- return ret;
+ goto unlock;
subs->need_setup_ep = false;
}
/* for playback, submit the URBs now; otherwise, the first hwptr_done
* updates for all URBs would happen at the same time when starting */
if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK)
- return start_endpoints(subs, 1);
+ ret = start_endpoints(subs, 1);
- return 0;
+ unlock:
+ up_read(&subs->stream->chip->shutdown_rwsem);
+ return ret;
}
static struct snd_pcm_hardware snd_usb_hardware =
return 0;
}
/* check whether the period time is >= the data packet interval */
- if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL) {
+ if (subs->speed != USB_SPEED_FULL) {
ptime = 125 * (1 << fp->datainterval);
if (ptime > pt->max || (ptime == pt->max && pt->openmax)) {
hwc_debug(" > check: ptime %u > max %u\n", ptime, pt->max);
return err;
param_period_time_if_needed = SNDRV_PCM_HW_PARAM_PERIOD_TIME;
- if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL)
+ if (subs->speed == USB_SPEED_FULL)
/* full speed devices have fixed data packet interval */
ptmin = 1000;
if (ptmin == 1000)
}
snd_iprintf(buffer, "\n");
}
- if (snd_usb_get_speed(subs->dev) != USB_SPEED_FULL)
+ if (subs->speed != USB_SPEED_FULL)
snd_iprintf(buffer, " Data packet interval: %d us\n",
125 * (1 << fp->datainterval));
// snd_iprintf(buffer, " Max Packet Size = %d\n", fp->maxpacksize);
return;
snd_iprintf(buffer, " Packet Size = %d\n", ep->curpacksize);
snd_iprintf(buffer, " Momentary freq = %u Hz (%#x.%04x)\n",
- snd_usb_get_speed(subs->dev) == USB_SPEED_FULL
+ subs->speed == USB_SPEED_FULL
? get_full_speed_hz(ep->freqm)
: get_high_speed_hz(ep->freqm),
ep->freqm >> 16, ep->freqm & 0xffff);
subs->direction = stream;
subs->dev = as->chip->dev;
subs->txfr_quirk = as->chip->txfr_quirk;
+ subs->speed = snd_usb_get_speed(subs->dev);
snd_usb_set_pcm_ops(as->pcm, stream);
struct usb_interface *pm_intf;
u32 usb_id;
struct mutex mutex;
- struct mutex shutdown_mutex;
+ struct rw_semaphore shutdown_rwsem;
unsigned int shutdown:1;
unsigned int probing:1;
unsigned int autosuspended:1;
projects / mirror_ubuntu-jammy-kernel.git / commitdiff