return lowest_lsn;
}
+/*
+ * Return true if we need to stop processing, false to continue to the next
+ * iclog. The caller will need to run callbacks if the iclog is returned in the
+ * XLOG_STATE_CALLBACK state.
+ */
+static bool
+xlog_state_iodone_process_iclog(
+ struct xlog *log,
+ struct xlog_in_core *iclog,
+ struct xlog_in_core *completed_iclog,
+ bool *ioerror)
+{
+ xfs_lsn_t lowest_lsn;
+
+ /* Skip all iclogs in the ACTIVE & DIRTY states */
+ if (iclog->ic_state & (XLOG_STATE_ACTIVE | XLOG_STATE_DIRTY))
+ return false;
+
+ /*
+ * Between marking a filesystem SHUTDOWN and stopping the log, we do
+ * flush all iclogs to disk (if there wasn't a log I/O error). So, we do
+ * want things to go smoothly in case of just a SHUTDOWN w/o a
+ * LOG_IO_ERROR.
+ */
+ if (iclog->ic_state & XLOG_STATE_IOERROR) {
+ *ioerror = true;
+ return false;
+ }
+
+ /*
+ * Can only perform callbacks in order. Since this iclog is not in the
+ * DONE_SYNC/ DO_CALLBACK state, we skip the rest and just try to clean
+ * up. If we set our iclog to DO_CALLBACK, we will not process it when
+ * we retry since a previous iclog is in the CALLBACK and the state
+ * cannot change since we are holding the l_icloglock.
+ */
+ if (!(iclog->ic_state &
+ (XLOG_STATE_DONE_SYNC | XLOG_STATE_DO_CALLBACK))) {
+ if (completed_iclog &&
+ (completed_iclog->ic_state == XLOG_STATE_DONE_SYNC)) {
+ completed_iclog->ic_state = XLOG_STATE_DO_CALLBACK;
+ }
+ return true;
+ }
+
+ /*
+ * We now have an iclog that is in either the DO_CALLBACK or DONE_SYNC
+ * states. The other states (WANT_SYNC, SYNCING, or CALLBACK were caught
+ * by the above if and are going to clean (i.e. we aren't doing their
+ * callbacks) see the above if.
+ *
+ * We will do one more check here to see if we have chased our tail
+ * around.
+ */
+ lowest_lsn = xlog_get_lowest_lsn(log);
+ if (lowest_lsn &&
+ XFS_LSN_CMP(lowest_lsn, be64_to_cpu(iclog->ic_header.h_lsn)) < 0)
+ return false; /* Leave this iclog for another thread */
+
+ iclog->ic_state = XLOG_STATE_CALLBACK;
+
+ /*
+ * Completion of a iclog IO does not imply that a transaction has
+ * completed, as transactions can be large enough to span many iclogs.
+ * We cannot change the tail of the log half way through a transaction
+ * as this may be the only transaction in the log and moving th etail to
+ * point to the middle of it will prevent recovery from finding the
+ * start of the transaction. Hence we should only update the
+ * last_sync_lsn if this iclog contains transaction completion callbacks
+ * on it.
+ *
+ * We have to do this before we drop the icloglock to ensure we are the
+ * only one that can update it.
+ */
+ ASSERT(XFS_LSN_CMP(atomic64_read(&log->l_last_sync_lsn),
+ be64_to_cpu(iclog->ic_header.h_lsn)) <= 0);
+ if (!list_empty_careful(&iclog->ic_callbacks))
+ atomic64_set(&log->l_last_sync_lsn,
+ be64_to_cpu(iclog->ic_header.h_lsn));
+
+ return false;
+
+}
+
/*
* Keep processing entries in the iclog callback list until we come around and
* it is empty. We need to atomically see that the list is empty and change the
bool aborted,
struct xlog_in_core *ciclog)
{
- xlog_in_core_t *iclog;
- xlog_in_core_t *first_iclog; /* used to know when we've
- * processed all iclogs once */
- int flushcnt = 0;
- xfs_lsn_t lowest_lsn;
- int ioerrors; /* counter: iclogs with errors */
- bool cycled_icloglock;
- bool did_callbacks;
- int repeats; /* for issuing console warnings if
- * looping too many times */
+ struct xlog_in_core *iclog;
+ struct xlog_in_core *first_iclog;
+ bool did_callbacks = false;
+ bool cycled_icloglock;
+ bool ioerror;
+ int flushcnt = 0;
+ int repeats = 0;
spin_lock(&log->l_icloglock);
- first_iclog = iclog = log->l_iclog;
- ioerrors = 0;
- did_callbacks = 0;
- repeats = 0;
-
do {
/*
* Scan all iclogs starting with the one pointed to by the
first_iclog = log->l_iclog;
iclog = log->l_iclog;
cycled_icloglock = false;
+ ioerror = false;
repeats++;
do {
+ if (xlog_state_iodone_process_iclog(log, iclog,
+ ciclog, &ioerror))
+ break;
- /* skip all iclogs in the ACTIVE & DIRTY states */
- if (iclog->ic_state &
- (XLOG_STATE_ACTIVE|XLOG_STATE_DIRTY)) {
+ if (!(iclog->ic_state &
+ (XLOG_STATE_CALLBACK | XLOG_STATE_IOERROR))) {
iclog = iclog->ic_next;
continue;
}
- /*
- * Between marking a filesystem SHUTDOWN and stopping
- * the log, we do flush all iclogs to disk (if there
- * wasn't a log I/O error). So, we do want things to
- * go smoothly in case of just a SHUTDOWN w/o a
- * LOG_IO_ERROR.
- */
- if (!(iclog->ic_state & XLOG_STATE_IOERROR)) {
- /*
- * Can only perform callbacks in order. Since
- * this iclog is not in the DONE_SYNC/
- * DO_CALLBACK state, we skip the rest and
- * just try to clean up. If we set our iclog
- * to DO_CALLBACK, we will not process it when
- * we retry since a previous iclog is in the
- * CALLBACK and the state cannot change since
- * we are holding the l_icloglock.
- */
- if (!(iclog->ic_state &
- (XLOG_STATE_DONE_SYNC |
- XLOG_STATE_DO_CALLBACK))) {
- if (ciclog && (ciclog->ic_state ==
- XLOG_STATE_DONE_SYNC)) {
- ciclog->ic_state = XLOG_STATE_DO_CALLBACK;
- }
- break;
- }
- /*
- * We now have an iclog that is in either the
- * DO_CALLBACK or DONE_SYNC states. The other
- * states (WANT_SYNC, SYNCING, or CALLBACK were
- * caught by the above if and are going to
- * clean (i.e. we aren't doing their callbacks)
- * see the above if.
- */
-
- /*
- * We will do one more check here to see if we
- * have chased our tail around.
- */
-
- lowest_lsn = xlog_get_lowest_lsn(log);
- if (lowest_lsn &&
- XFS_LSN_CMP(lowest_lsn,
- be64_to_cpu(iclog->ic_header.h_lsn)) < 0) {
- iclog = iclog->ic_next;
- continue; /* Leave this iclog for
- * another thread */
- }
-
- iclog->ic_state = XLOG_STATE_CALLBACK;
-
-
- /*
- * Completion of a iclog IO does not imply that
- * a transaction has completed, as transactions
- * can be large enough to span many iclogs. We
- * cannot change the tail of the log half way
- * through a transaction as this may be the only
- * transaction in the log and moving th etail to
- * point to the middle of it will prevent
- * recovery from finding the start of the
- * transaction. Hence we should only update the
- * last_sync_lsn if this iclog contains
- * transaction completion callbacks on it.
- *
- * We have to do this before we drop the
- * icloglock to ensure we are the only one that
- * can update it.
- */
- ASSERT(XFS_LSN_CMP(atomic64_read(&log->l_last_sync_lsn),
- be64_to_cpu(iclog->ic_header.h_lsn)) <= 0);
- if (!list_empty_careful(&iclog->ic_callbacks))
- atomic64_set(&log->l_last_sync_lsn,
- be64_to_cpu(iclog->ic_header.h_lsn));
-
- } else
- ioerrors++;
-
/*
* Running callbacks will drop the icloglock which means
* we'll have to run at least one more complete loop.
"%s: possible infinite loop (%d iterations)",
__func__, flushcnt);
}
- } while (!ioerrors && cycled_icloglock);
+ } while (!ioerror && cycled_icloglock);
if (did_callbacks)
xlog_state_callback_check_state(log);
projects / mirror_ubuntu-jammy-kernel.git / commitdiff