return err;
}
+static int brcmf_p2p_disable_p2p_if(struct brcmf_cfg80211_vif *vif)
+{
+ struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev);
+ struct net_device *pri_ndev = cfg_to_ndev(cfg);
+ struct brcmf_if *ifp = netdev_priv(pri_ndev);
+ u8 *addr = vif->wdev.netdev->dev_addr;
+
+ return brcmf_fil_iovar_data_set(ifp, "p2p_ifdis", addr, ETH_ALEN);
+}
+
+static int brcmf_p2p_release_p2p_if(struct brcmf_cfg80211_vif *vif)
+{
+ struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev);
+ struct net_device *pri_ndev = cfg_to_ndev(cfg);
+ struct brcmf_if *ifp = netdev_priv(pri_ndev);
+ u8 *addr = vif->wdev.netdev->dev_addr;
+
+ return brcmf_fil_iovar_data_set(ifp, "p2p_ifdel", addr, ETH_ALEN);
+}
+
/**
* brcmf_p2p_add_vif() - create a new P2P virtual interface.
*
{
struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
struct brcmf_cfg80211_vif *vif;
+ unsigned long jiffie_timeout = msecs_to_jiffies(1500);
+ bool wait_for_disable = false;
int err;
+ brcmf_dbg(TRACE, "delete P2P vif\n");
vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
- if (brcmf_cfg80211_vif_event_armed(cfg))
- return -EBUSY;
+ switch (vif->wdev.iftype) {
+ case NL80211_IFTYPE_P2P_CLIENT:
+ if (test_bit(BRCMF_VIF_STATUS_DISCONNECTING, &vif->sme_state))
+ wait_for_disable = true;
+ break;
+
+ case NL80211_IFTYPE_P2P_GO:
+ if (!brcmf_p2p_disable_p2p_if(vif))
+ wait_for_disable = true;
+ break;
+
+ case NL80211_IFTYPE_P2P_DEVICE:
+ default:
+ return -ENOTSUPP;
+ break;
+ }
+
+ if (wait_for_disable)
+ wait_for_completion_timeout(&cfg->vif_disabled, 500);
+
+ brcmf_vif_clear_mgmt_ies(vif);
brcmf_cfg80211_arm_vif_event(cfg, vif);
- /* wait for firmware event */
- err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL,
- msecs_to_jiffies(1500));
+ err = brcmf_p2p_release_p2p_if(vif);
+ if (!err)
+ /* wait for firmware event */
+ err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL,
+ jiffie_timeout);
brcmf_cfg80211_arm_vif_event(cfg, NULL);
- if (wdev->netdev)
- brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name);
- else
- brcmf_dbg(INFO, "deleting vif \"wdev-%u\"\n",
- wdev->identifier);
- brcmf_err("enter - not supported yet\n");
- return -EOPNOTSUPP;
+ brcmf_free_vif(vif);
+
+ return err;
}
}
}
+static void brcmf_set_mpc(struct net_device *ndev, int mpc)
+{
+ struct brcmf_if *ifp = netdev_priv(ndev);
+ s32 err = 0;
+
+ if (check_vif_up(ifp->vif)) {
+ err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc);
+ if (err) {
+ brcmf_err("fail to set mpc\n");
+ return;
+ }
+ brcmf_dbg(INFO, "MPC : %d\n", mpc);
+ }
+}
+
+static s32
+brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
+ struct net_device *ndev,
+ bool aborted, bool fw_abort)
+{
+ struct brcmf_scan_params_le params_le;
+ struct cfg80211_scan_request *scan_request;
+ s32 err = 0;
+
+ brcmf_dbg(SCAN, "Enter\n");
+
+ /* clear scan request, because the FW abort can cause a second call */
+ /* to this functon and might cause a double cfg80211_scan_done */
+ scan_request = cfg->scan_request;
+ cfg->scan_request = NULL;
+
+ if (timer_pending(&cfg->escan_timeout))
+ del_timer_sync(&cfg->escan_timeout);
+
+ if (fw_abort) {
+ /* Do a scan abort to stop the driver's scan engine */
+ brcmf_dbg(SCAN, "ABORT scan in firmware\n");
+ memset(¶ms_le, 0, sizeof(params_le));
+ memset(params_le.bssid, 0xFF, ETH_ALEN);
+ params_le.bss_type = DOT11_BSSTYPE_ANY;
+ params_le.scan_type = 0;
+ params_le.channel_num = cpu_to_le32(1);
+ params_le.nprobes = cpu_to_le32(1);
+ params_le.active_time = cpu_to_le32(-1);
+ params_le.passive_time = cpu_to_le32(-1);
+ params_le.home_time = cpu_to_le32(-1);
+ /* Scan is aborted by setting channel_list[0] to -1 */
+ params_le.channel_list[0] = cpu_to_le16(-1);
+ /* E-Scan (or anyother type) can be aborted by SCAN */
+ err = brcmf_fil_cmd_data_set(netdev_priv(ndev), BRCMF_C_SCAN,
+ ¶ms_le, sizeof(params_le));
+ if (err)
+ brcmf_err("Scan abort failed\n");
+ }
+ /*
+ * e-scan can be initiated by scheduled scan
+ * which takes precedence.
+ */
+ if (cfg->sched_escan) {
+ brcmf_dbg(SCAN, "scheduled scan completed\n");
+ cfg->sched_escan = false;
+ if (!aborted)
+ cfg80211_sched_scan_results(cfg_to_wiphy(cfg));
+ brcmf_set_mpc(ndev, 1);
+ } else if (scan_request) {
+ brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n",
+ aborted ? "Aborted" : "Done");
+ cfg80211_scan_done(scan_request, aborted);
+ brcmf_set_mpc(ndev, 1);
+ }
+ if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
+ brcmf_err("Scan complete while device not scanning\n");
+ return -EPERM;
+ }
+
+ return err;
+}
+
static
int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev)
{
+ struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
+ struct net_device *ndev = wdev->netdev;
+
+ /* vif event pending in firmware */
+ if (brcmf_cfg80211_vif_event_armed(cfg))
+ return -EBUSY;
+
+ if (ndev) {
+ if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status) &&
+ cfg->escan_info.ndev == ndev)
+ brcmf_notify_escan_complete(cfg, ndev, true,
+ true);
+
+ brcmf_fil_iovar_int_set(netdev_priv(ndev), "mpc", 1);
+ }
+
switch (wdev->iftype) {
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_STATION:
return err;
}
-static void brcmf_set_mpc(struct net_device *ndev, int mpc)
-{
- struct brcmf_if *ifp = netdev_priv(ndev);
- s32 err = 0;
-
- if (check_vif_up(ifp->vif)) {
- err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc);
- if (err) {
- brcmf_err("fail to set mpc\n");
- return;
- }
- brcmf_dbg(INFO, "MPC : %d\n", mpc);
- }
-}
-
static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le,
struct cfg80211_scan_request *request)
{
(n_channels & BRCMF_SCAN_PARAMS_COUNT_MASK));
}
-static s32
-brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
- struct net_device *ndev,
- bool aborted, bool fw_abort)
-{
- struct brcmf_scan_params_le params_le;
- struct cfg80211_scan_request *scan_request;
- s32 err = 0;
-
- brcmf_dbg(SCAN, "Enter\n");
-
- /* clear scan request, because the FW abort can cause a second call */
- /* to this functon and might cause a double cfg80211_scan_done */
- scan_request = cfg->scan_request;
- cfg->scan_request = NULL;
-
- if (timer_pending(&cfg->escan_timeout))
- del_timer_sync(&cfg->escan_timeout);
-
- if (fw_abort) {
- /* Do a scan abort to stop the driver's scan engine */
- brcmf_dbg(SCAN, "ABORT scan in firmware\n");
- memset(¶ms_le, 0, sizeof(params_le));
- memset(params_le.bssid, 0xFF, ETH_ALEN);
- params_le.bss_type = DOT11_BSSTYPE_ANY;
- params_le.scan_type = 0;
- params_le.channel_num = cpu_to_le32(1);
- params_le.nprobes = cpu_to_le32(1);
- params_le.active_time = cpu_to_le32(-1);
- params_le.passive_time = cpu_to_le32(-1);
- params_le.home_time = cpu_to_le32(-1);
- /* Scan is aborted by setting channel_list[0] to -1 */
- params_le.channel_list[0] = cpu_to_le16(-1);
- /* E-Scan (or anyother type) can be aborted by SCAN */
- err = brcmf_fil_cmd_data_set(netdev_priv(ndev), BRCMF_C_SCAN,
- ¶ms_le, sizeof(params_le));
- if (err)
- brcmf_err("Scan abort failed\n");
- }
- /*
- * e-scan can be initiated by scheduled scan
- * which takes precedence.
- */
- if (cfg->sched_escan) {
- brcmf_dbg(SCAN, "scheduled scan completed\n");
- cfg->sched_escan = false;
- if (!aborted)
- cfg80211_sched_scan_results(cfg_to_wiphy(cfg));
- brcmf_set_mpc(ndev, 1);
- } else if (scan_request) {
- brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n",
- aborted ? "Aborted" : "Done");
- cfg80211_scan_done(scan_request, aborted);
- brcmf_set_mpc(ndev, 1);
- }
- if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) {
- brcmf_err("Scan complete while device not scanning\n");
- return -EPERM;
- }
-
- return err;
-}
-
static s32
brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct net_device *ndev,
struct cfg80211_scan_request *request, u16 action)
return err;
}
+s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif)
+{
+ s32 pktflags[] = {
+ BRCMF_VNDR_IE_PRBREQ_FLAG,
+ BRCMF_VNDR_IE_PRBRSP_FLAG,
+ BRCMF_VNDR_IE_BEACON_FLAG
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pktflags); i++)
+ brcmf_vif_set_mgmt_ie(vif, pktflags[i], NULL, 0);
+
+ memset(&vif->saved_ie, 0, sizeof(vif->saved_ie));
+ return 0;
+}
+
static s32
brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev,
struct cfg80211_ap_settings *settings)
struct station_info sinfo;
brcmf_dbg(CONN, "event %d, reason %d\n", event, reason);
+ if (event == BRCMF_E_LINK && reason == BRCMF_E_REASON_LINK_BSSCFG_DIS &&
+ ndev != cfg_to_ndev(cfg)) {
+ brcmf_dbg(CONN, "AP mode link down\n");
+ complete(&cfg->vif_disabled);
+ return 0;
+ }
if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) &&
(reason == BRCMF_E_STATUS_SUCCESS)) {
}
brcmf_link_down(ifp->vif);
brcmf_init_prof(ndev_to_prof(ndev));
+ if (ndev != cfg_to_ndev(cfg))
+ complete(&cfg->vif_disabled);
} else if (brcmf_is_nonetwork(cfg, e)) {
if (brcmf_is_ibssmode(ifp->vif))
clear_bit(BRCMF_VIF_STATUS_CONNECTING,
case BRCMF_E_IF_DEL:
ifp->vif = NULL;
- brcmf_free_vif(vif);
mutex_unlock(&event->vif_event_lock);
/* event may not be upon user request */
if (brcmf_cfg80211_vif_event_armed(cfg))
mutex_init(&cfg->usr_sync);
brcmf_init_escan(cfg);
brcmf_init_conf(cfg->conf);
-
+ init_completion(&cfg->vif_disabled);
return err;
}