+++ /dev/null
-/* Device Tree Source for Motorola PrPMC2800
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Property values that are labeled as "Default" will be updated by bootwrapper
- * if it can determine the exact PrPMC type.
- */
-
-/dts-v1/;
-
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
- model = "PrPMC280/PrPMC2800"; /* Default */
- compatible = "motorola,PrPMC2800";
- coherency-off;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,7447 {
- device_type = "cpu";
- reg = <0>;
- clock-frequency = <733333333>; /* Default */
- bus-frequency = <133333333>;
- timebase-frequency = <33333333>;
- i-cache-line-size = <32>;
- d-cache-line-size = <32>;
- i-cache-size = <32768>;
- d-cache-size = <32768>;
- };
- };
-
- memory {
- device_type = "memory";
- reg = <0x0 0x20000000>; /* Default (512MB) */
- };
-
- system-controller@f1000000 { /* Marvell Discovery mv64360 */
- #address-cells = <1>;
- #size-cells = <1>;
- model = "mv64360"; /* Default */
- compatible = "marvell,mv64360";
- clock-frequency = <133333333>;
- reg = <0xf1000000 0x10000>;
- virtual-reg = <0xf1000000>;
- ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
- 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
- 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
- 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
- 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
- flash@a0000000 {
- device_type = "rom";
- compatible = "direct-mapped";
- reg = <0xa0000000 0x4000000>; /* Default (64MB) */
- probe-type = "CFI";
- bank-width = <4>;
- partitions = <0x00000000 0x00100000 /* RO */
- 0x00100000 0x00040001 /* RW */
- 0x00140000 0x00400000 /* RO */
- 0x00540000 0x039c0000 /* RO */
- 0x03f00000 0x00100000>; /* RO */
- partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
- };
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-mdio";
- PHY0: ethernet-phy@1 {
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <1>;
- };
- PHY1: ethernet-phy@3 {
- compatible = "broadcom,bcm5421";
- interrupts = <76>; /* GPP 12 */
- interrupt-parent = <&PIC>;
- reg = <3>;
- };
- };
-
- ethernet-group@2000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,mv64360-eth-group";
- reg = <0x2000 0x2000>;
- ethernet@0 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <0>;
- interrupts = <32>;
- interrupt-parent = <&PIC>;
- phy = <&PHY0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- ethernet@1 {
- device_type = "network";
- compatible = "marvell,mv64360-eth";
- reg = <1>;
- interrupts = <33>;
- interrupt-parent = <&PIC>;
- phy = <&PHY1>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
-
- SDMA0: sdma@4000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x4000 0xc18>;
- virtual-reg = <0xf1004000>;
- interrupts = <36>;
- interrupt-parent = <&PIC>;
- };
-
- SDMA1: sdma@6000 {
- compatible = "marvell,mv64360-sdma";
- reg = <0x6000 0xc18>;
- virtual-reg = <0xf1006000>;
- interrupts = <38>;
- interrupt-parent = <&PIC>;
- };
-
- BRG0: brg@b200 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb200 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
- BRG1: brg@b208 {
- compatible = "marvell,mv64360-brg";
- reg = <0xb208 0x8>;
- clock-src = <8>;
- clock-frequency = <133333333>;
- current-speed = <9600>;
- };
-
- CUNIT: cunit@f200 {
- reg = <0xf200 0x200>;
- };
-
- MPSCROUTING: mpscrouting@b400 {
- reg = <0xb400 0xc>;
- };
-
- MPSCINTR: mpscintr@b800 {
- reg = <0xb800 0x100>;
- virtual-reg = <0xf100b800>;
- };
-
- MPSC0: mpsc@8000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x8000 0x38>;
- virtual-reg = <0xf1008000>;
- sdma = <&SDMA0>;
- brg = <&BRG0>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <0>;
- interrupts = <40>;
- interrupt-parent = <&PIC>;
- };
-
- MPSC1: mpsc@9000 {
- compatible = "marvell,mv64360-mpsc";
- reg = <0x9000 0x38>;
- virtual-reg = <0xf1009000>;
- sdma = <&SDMA1>;
- brg = <&BRG1>;
- cunit = <&CUNIT>;
- mpscrouting = <&MPSCROUTING>;
- mpscintr = <&MPSCINTR>;
- cell-index = <1>;
- interrupts = <42>;
- interrupt-parent = <&PIC>;
- };
-
- wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64360-wdt";
- reg = <0xb410 0x8>;
- };
-
- i2c@c000 {
- device_type = "i2c";
- compatible = "marvell,mv64360-i2c";
- reg = <0xc000 0x20>;
- virtual-reg = <0xf100c000>;
- interrupts = <37>;
- interrupt-parent = <&PIC>;
- };
-
- PIC: pic {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- compatible = "marvell,mv64360-pic";
- reg = <0x0 0x88>;
- interrupt-controller;
- };
-
- mpp@f000 {
- compatible = "marvell,mv64360-mpp";
- reg = <0xf000 0x10>;
- };
-
- gpp@f100 {
- compatible = "marvell,mv64360-gpp";
- reg = <0xf100 0x20>;
- };
-
- pci@80000000 {
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- device_type = "pci";
- compatible = "marvell,mv64360-pci";
- reg = <0xcf8 0x8>;
- ranges = <0x01000000 0x0 0x0
- 0x88000000 0x0 0x01000000
- 0x02000000 0x0 0x80000000
- 0x80000000 0x0 0x08000000>;
- bus-range = <0 255>;
- clock-frequency = <66000000>;
- interrupt-pci-iack = <0xc34>;
- interrupt-parent = <&PIC>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0a */
- 0x5000 0 0 1 &PIC 80
- 0x5000 0 0 2 &PIC 81
- 0x5000 0 0 3 &PIC 91
- 0x5000 0 0 4 &PIC 93
-
- /* IDSEL 0x0b */
- 0x5800 0 0 1 &PIC 91
- 0x5800 0 0 2 &PIC 93
- 0x5800 0 0 3 &PIC 80
- 0x5800 0 0 4 &PIC 81
-
- /* IDSEL 0x0c */
- 0x6000 0 0 1 &PIC 91
- 0x6000 0 0 2 &PIC 93
- 0x6000 0 0 3 &PIC 80
- 0x6000 0 0 4 &PIC 81
-
- /* IDSEL 0x0d */
- 0x6800 0 0 1 &PIC 93
- 0x6800 0 0 2 &PIC 80
- 0x6800 0 0 3 &PIC 81
- 0x6800 0 0 4 &PIC 91
- >;
- };
-
- cpu-error@0070 {
- compatible = "marvell,mv64360-cpu-error";
- reg = <0x70 0x10 0x128 0x28>;
- interrupts = <3>;
- interrupt-parent = <&PIC>;
- };
-
- sram-ctrl@0380 {
- compatible = "marvell,mv64360-sram-ctrl";
- reg = <0x380 0x80>;
- interrupts = <13>;
- interrupt-parent = <&PIC>;
- };
-
- pci-error@1d40 {
- compatible = "marvell,mv64360-pci-error";
- reg = <0x1d40 0x40 0xc28 0x4>;
- interrupts = <12>;
- interrupt-parent = <&PIC>;
- };
-
- mem-ctrl@1400 {
- compatible = "marvell,mv64360-mem-ctrl";
- reg = <0x1400 0x60>;
- interrupts = <17>;
- interrupt-parent = <&PIC>;
- };
- };
-
- chosen {
- bootargs = "ip=on";
- linux,stdout-path = &MPSC0;
- };
-};
+++ /dev/null
-/*
- * Motorola ECC prpmc280/f101 & prpmc2800/f101e platform code.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "elf.h"
-#include "page.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "gunzip_util.h"
-#include "mv64x60.h"
-
-#define KB 1024U
-#define MB (KB*KB)
-#define GB (KB*MB)
-#define MHz (1000U*1000U)
-#define GHz (1000U*MHz)
-
-#define BOARD_MODEL "PrPMC2800"
-#define BOARD_MODEL_MAX 32 /* max strlen(BOARD_MODEL) + 1 */
-
-#define EEPROM2_ADDR 0xa4
-#define EEPROM3_ADDR 0xa8
-
-BSS_STACK(16*KB);
-
-static u8 *bridge_base;
-
-typedef enum {
- BOARD_MODEL_PRPMC280,
- BOARD_MODEL_PRPMC2800,
-} prpmc2800_board_model;
-
-typedef enum {
- BRIDGE_TYPE_MV64360,
- BRIDGE_TYPE_MV64362,
-} prpmc2800_bridge_type;
-
-struct prpmc2800_board_info {
- prpmc2800_board_model model;
- char variant;
- prpmc2800_bridge_type bridge_type;
- u8 subsys0;
- u8 subsys1;
- u8 vpd4;
- u8 vpd4_mask;
- u32 core_speed;
- u32 mem_size;
- u32 boot_flash;
- u32 user_flash;
-};
-
-static struct prpmc2800_board_info prpmc2800_board_info[] = {
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'a',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x00,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'b',
- .bridge_type = BRIDGE_TYPE_MV64362,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x01,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 0,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'c',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x02,
- .vpd4_mask = 0x0f,
- .core_speed = 733*MHz,
- .mem_size = 512*MB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'd',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x03,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 1*GB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'e',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x04,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'f',
- .bridge_type = BRIDGE_TYPE_MV64362,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x05,
- .vpd4_mask = 0x0f,
- .core_speed = 733*MHz,
- .mem_size = 128*MB,
- .boot_flash = 1*MB,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'g',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x06,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 256*MB,
- .boot_flash = 1*MB,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC280,
- .variant = 'h',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xff,
- .subsys1 = 0xff,
- .vpd4 = 0x07,
- .vpd4_mask = 0x0f,
- .core_speed = 1*GHz,
- .mem_size = 1*GB,
- .boot_flash = 1*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'a',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xb2,
- .subsys1 = 0x8c,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'b',
- .bridge_type = BRIDGE_TYPE_MV64362,
- .subsys0 = 0xb2,
- .subsys1 = 0x8d,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 0,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'c',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xb2,
- .subsys1 = 0x8e,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 733*MHz,
- .mem_size = 512*MB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'd',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xb2,
- .subsys1 = 0x8f,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 1*GB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'e',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xa2,
- .subsys1 = 0x8a,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 512*MB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'f',
- .bridge_type = BRIDGE_TYPE_MV64362,
- .subsys0 = 0xa2,
- .subsys1 = 0x8b,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 733*MHz,
- .mem_size = 128*MB,
- .boot_flash = 2*MB,
- .user_flash = 0,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'g',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xa2,
- .subsys1 = 0x8c,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 1*GHz,
- .mem_size = 2*GB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
- {
- .model = BOARD_MODEL_PRPMC2800,
- .variant = 'h',
- .bridge_type = BRIDGE_TYPE_MV64360,
- .subsys0 = 0xa2,
- .subsys1 = 0x8d,
- .vpd4 = 0x00,
- .vpd4_mask = 0x00,
- .core_speed = 733*MHz,
- .mem_size = 1*GB,
- .boot_flash = 2*MB,
- .user_flash = 64*MB,
- },
-};
-
-static struct prpmc2800_board_info *prpmc2800_get_board_info(u8 *vpd)
-{
- struct prpmc2800_board_info *bip;
- int i;
-
- for (i=0,bip=prpmc2800_board_info; i<ARRAY_SIZE(prpmc2800_board_info);
- i++,bip++)
- if ((vpd[0] == bip->subsys0) && (vpd[1] == bip->subsys1)
- && ((vpd[4] & bip->vpd4_mask) == bip->vpd4))
- return bip;
-
- return NULL;
-}
-
-/* Get VPD from i2c eeprom 2, then match it to a board info entry */
-static struct prpmc2800_board_info *prpmc2800_get_bip(void)
-{
- struct prpmc2800_board_info *bip;
- u8 vpd[5];
- int rc;
-
- if (mv64x60_i2c_open())
- fatal("Error: Can't open i2c device\n\r");
-
- /* Get VPD from i2c eeprom-2 */
- memset(vpd, 0, sizeof(vpd));
- rc = mv64x60_i2c_read(EEPROM2_ADDR, vpd, 0x1fde, 2, sizeof(vpd));
- if (rc < 0)
- fatal("Error: Couldn't read eeprom2\n\r");
- mv64x60_i2c_close();
-
- /* Get board type & related info */
- bip = prpmc2800_get_board_info(vpd);
- if (bip == NULL) {
- printf("Error: Unsupported board or corrupted VPD:\n\r");
- printf(" 0x%x 0x%x 0x%x 0x%x 0x%x\n\r",
- vpd[0], vpd[1], vpd[2], vpd[3], vpd[4]);
- printf("Using device tree defaults...\n\r");
- }
-
- return bip;
-}
-
-static void prpmc2800_bridge_setup(u32 mem_size)
-{
- u32 i, v[12], enables, acc_bits;
- u32 pci_base_hi, pci_base_lo, size, buf[2];
- unsigned long cpu_base;
- int rc;
- void *devp;
- u8 *bridge_pbase, is_coherent;
- struct mv64x60_cpu2pci_win *tbl;
-
- bridge_pbase = mv64x60_get_bridge_pbase();
- is_coherent = mv64x60_is_coherent();
-
- if (is_coherent)
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
- else
- acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
- | MV64x60_PCI_ACC_CNTL_SWAP_NONE
- | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
- | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
- mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
- mv64x60_config_pci_windows(bridge_base, bridge_pbase, 0, 0, mem_size,
- acc_bits);
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = find_node_by_compatible(NULL, "marvell,mv64360-pci");
- if (devp == NULL)
- fatal("Error: Missing marvell,mv64360-pci"
- " device tree node\n\r");
-
- rc = getprop(devp, "ranges", v, sizeof(v));
- if (rc != sizeof(v))
- fatal("Error: Can't find marvell,mv64360-pci ranges"
- " property\n\r");
-
- /* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (devp == NULL)
- fatal("Error: Missing marvell,mv64360 device tree node\n\r");
-
- enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
- enables |= 0x0007fe00; /* Disable all cpu->pci windows */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-
- for (i=0; i<12; i+=6) {
- switch (v[i] & 0xff000000) {
- case 0x01000000: /* PCI I/O Space */
- tbl = mv64x60_cpu2pci_io;
- break;
- case 0x02000000: /* PCI MEM Space */
- tbl = mv64x60_cpu2pci_mem;
- break;
- default:
- continue;
- }
-
- pci_base_hi = v[i+1];
- pci_base_lo = v[i+2];
- cpu_base = v[i+3];
- size = v[i+5];
-
- buf[0] = cpu_base;
- buf[1] = size;
-
- if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
- fatal("Error: Can't translate PCI address 0x%x\n\r",
- (u32)cpu_base);
-
- mv64x60_config_cpu2pci_window(bridge_base, 0, pci_base_hi,
- pci_base_lo, cpu_base, size, tbl);
- }
-
- enables &= ~0x00000600; /* Enable cpu->pci0 i/o, cpu->pci0 mem0 */
- out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-}
-
-static void prpmc2800_fixups(void)
-{
- u32 v[2], l, mem_size;
- int rc;
- void *devp;
- char model[BOARD_MODEL_MAX];
- struct prpmc2800_board_info *bip;
-
- bip = prpmc2800_get_bip(); /* Get board info based on VPD */
-
- mem_size = (bip) ? bip->mem_size : mv64x60_get_mem_size(bridge_base);
- prpmc2800_bridge_setup(mem_size); /* Do necessary bridge setup */
-
- /* If the VPD doesn't match what we know about, just use the
- * defaults already in the device tree.
- */
- if (!bip)
- return;
-
- /* Know the board type so override device tree defaults */
- /* Set /model appropriately */
- devp = finddevice("/");
- if (devp == NULL)
- fatal("Error: Missing '/' device tree node\n\r");
- memset(model, 0, BOARD_MODEL_MAX);
- strncpy(model, BOARD_MODEL, BOARD_MODEL_MAX - 2);
- l = strlen(model);
- if (bip->model == BOARD_MODEL_PRPMC280)
- l--;
- model[l++] = bip->variant;
- model[l++] = '\0';
- setprop(devp, "model", model, l);
-
- /* Set /cpus/PowerPC,7447/clock-frequency */
- devp = find_node_by_prop_value_str(NULL, "device_type", "cpu");
- if (devp == NULL)
- fatal("Error: Missing proper cpu device tree node\n\r");
- v[0] = bip->core_speed;
- setprop(devp, "clock-frequency", &v[0], sizeof(v[0]));
-
- /* Set /memory/reg size */
- devp = finddevice("/memory");
- if (devp == NULL)
- fatal("Error: Missing /memory device tree node\n\r");
- v[0] = 0;
- v[1] = bip->mem_size;
- setprop(devp, "reg", v, sizeof(v));
-
- /* Update model, if this is a mv64362 */
- if (bip->bridge_type == BRIDGE_TYPE_MV64362) {
- devp = find_node_by_compatible(NULL, "marvell,mv64360");
- if (devp == NULL)
- fatal("Error: Missing marvell,mv64360"
- " device tree node\n\r");
- setprop(devp, "model", "mv64362", strlen("mv64362") + 1);
- }
-
- /* Set User FLASH size */
- devp = find_node_by_compatible(NULL, "direct-mapped");
- if (devp == NULL)
- fatal("Error: Missing User FLASH device tree node\n\r");
- rc = getprop(devp, "reg", v, sizeof(v));
- if (rc != sizeof(v))
- fatal("Error: Can't find User FLASH reg property\n\r");
- v[1] = bip->user_flash;
- setprop(devp, "reg", v, sizeof(v));
-}
-
-#define MV64x60_MPP_CNTL_0 0xf000
-#define MV64x60_MPP_CNTL_2 0xf008
-#define MV64x60_GPP_IO_CNTL 0xf100
-#define MV64x60_GPP_LEVEL_CNTL 0xf110
-#define MV64x60_GPP_VALUE_SET 0xf118
-
-static void prpmc2800_reset(void)
-{
- u32 temp;
-
- udelay(5000000);
-
- if (bridge_base != 0) {
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00000004;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
- temp &= 0xFFFF0FFF;
- out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
- temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
- temp |= 0x00080000;
- out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
- out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
- 0x00080004);
- }
-
- for (;;);
-}
-
-#define HEAP_SIZE (16*MB)
-static struct gunzip_state gzstate;
-
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- struct elf_info ei;
- char *heap_start, *dtb;
- int dt_size = _dtb_end - _dtb_start;
- void *vmlinuz_addr = _vmlinux_start;
- unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
- char elfheader[256];
-
- if (dt_size <= 0) /* No fdt */
- exit();
-
- /*
- * Start heap after end of the kernel (after decompressed to
- * address 0) or the end of the zImage, whichever is higher.
- * That's so things allocated by simple_alloc won't overwrite
- * any part of the zImage and the kernel won't overwrite the dtb
- * when decompressed & relocated.
- */
- gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
- gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
-
- if (!parse_elf32(elfheader, &ei))
- exit();
-
- heap_start = (char *)(ei.memsize + ei.elfoffset); /* end of kernel*/
- heap_start = max(heap_start, (char *)_end); /* end of zImage */
-
- if ((unsigned)simple_alloc_init(heap_start, HEAP_SIZE, 2*KB, 16)
- > (128*MB))
- exit();
-
- /* Relocate dtb to safe area past end of zImage & kernel */
- dtb = malloc(dt_size);
- if (!dtb)
- exit();
- memmove(dtb, _dtb_start, dt_size);
- fdt_init(dtb);
-
- bridge_base = mv64x60_get_bridge_base();
-
- platform_ops.fixups = prpmc2800_fixups;
- platform_ops.exit = prpmc2800_reset;
-
- if (serial_console_init() < 0)
- exit();
-}
-
-/* _zimage_start called very early--need to turn off external interrupts */
-asm (" .globl _zimage_start\n\
- _zimage_start:\n\
- mfmsr 10\n\
- rlwinm 10,10,0,~(1<<15) /* Clear MSR_EE */\n\
- sync\n\
- mtmsr 10\n\
- isync\n\
- b _zimage_start_lib\n\
-");