RPS provides a feedback loop where we use the load during the previous
evaluation interval to decide whether to up or down clock the GPU
frequency. Our responsiveness is split into 3 regimes, a high and low
plateau with the intent to keep the gpu clocked high to cover occasional
stalls under high load, and low despite occasional glitches under steady
low load, and inbetween. However, we run into situations like kodi where
we want to stay at low power (video decoding is done efficiently
inside the fixed function HW and doesn't need high clocks even for high
bitrate streams), but just occasionally the pipeline is more complex
than a video decode and we need a smidgen of extra GPU power to present
on time. In the high power regime, we sample at sub frame intervals with
a bias to upclocking, and conversely at low power we sample over a few
frames worth to provide what we consider to be the right levels of
responsiveness respectively. At low power, we more or less expect to be
kicked out to high power at the start of a busy sequence by waitboosting.
Prior to commit
e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active
request") whenever we missed the frame or stalled, we would immediate go
full throttle and upclock the GPU to max. But in commit
e9af4ea2b9e7, we
relaxed the waitboosting to only apply if the pipeline was deep to avoid
over-committing resources for a near miss. Sadly though, a near miss is
still a miss, and perceptible as jitter in the frame delivery.
To try and prevent the near miss before having to resort to boosting
after the fact, we use the pageflip queue as an indication that we are
in an "interactive" regime and so should sample the load more frequently
to provide power before the frame misses it vblank. This will make us
more favorable to providing a small power increase (one or two bins) as
required rather than going all the way to maximum and then having to
work back down again. (We still keep the waitboosting mechanism around
just in case a dramatic change in system load requires urgent uplocking,
faster than we can provide in a few evaluation intervals.)
v2: Reduce rps_set_interactive to a boolean parameter to avoid the
confusion of what if they wanted a new power mode after pinning to a
different mode (which to choose?)
v3: Only reprogram RPS while the GT is awake, it will be set when we
wake the GT, and while off warns about being used outside of rpm.
v4: Fix deferred application of interactive mode
v5: s/state/interactive/
v6: Group the mutex with its principle in a substruct
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111
Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
rpcurup, GT_PM_INTERVAL_TO_US(dev_priv, rpcurup));
seq_printf(m, "RP PREV UP: %d (%dus)\n",
rpprevup, GT_PM_INTERVAL_TO_US(dev_priv, rpprevup));
- seq_printf(m, "Up threshold: %d%%\n", rps->up_threshold);
+ seq_printf(m, "Up threshold: %d%%\n",
+ rps->power.up_threshold);
seq_printf(m, "RP CUR DOWN EI: %d (%dus)\n",
rpdownei, GT_PM_INTERVAL_TO_US(dev_priv, rpdownei));
rpcurdown, GT_PM_INTERVAL_TO_US(dev_priv, rpcurdown));
seq_printf(m, "RP PREV DOWN: %d (%dus)\n",
rpprevdown, GT_PM_INTERVAL_TO_US(dev_priv, rpprevdown));
- seq_printf(m, "Down threshold: %d%%\n", rps->down_threshold);
+ seq_printf(m, "Down threshold: %d%%\n",
+ rps->power.down_threshold);
max_freq = (IS_GEN9_LP(dev_priv) ? rp_state_cap >> 0 :
rp_state_cap >> 16) & 0xff;
seq_printf(m, "CPU waiting? %d\n", count_irq_waiters(dev_priv));
seq_printf(m, "Boosts outstanding? %d\n",
atomic_read(&rps->num_waiters));
+ seq_printf(m, "Interactive? %d\n", READ_ONCE(rps->power.interactive));
seq_printf(m, "Frequency requested %d\n",
intel_gpu_freq(dev_priv, rps->cur_freq));
seq_printf(m, " min hard:%d, soft:%d; max soft:%d, hard:%d\n",
intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
seq_printf(m, "\nRPS Autotuning (current \"%s\" window):\n",
- rps_power_to_str(rps->power));
+ rps_power_to_str(rps->power.mode));
seq_printf(m, " Avg. up: %d%% [above threshold? %d%%]\n",
rpup && rpupei ? 100 * rpup / rpupei : 0,
- rps->up_threshold);
+ rps->power.up_threshold);
seq_printf(m, " Avg. down: %d%% [below threshold? %d%%]\n",
rpdown && rpdownei ? 100 * rpdown / rpdownei : 0,
- rps->down_threshold);
+ rps->power.down_threshold);
} else {
seq_puts(m, "\nRPS Autotuning inactive\n");
}
u8 rp0_freq; /* Non-overclocked max frequency. */
u16 gpll_ref_freq; /* vlv/chv GPLL reference frequency */
- u8 up_threshold; /* Current %busy required to uplock */
- u8 down_threshold; /* Current %busy required to downclock */
-
int last_adj;
- enum { LOW_POWER, BETWEEN, HIGH_POWER } power;
+
+ struct {
+ struct mutex mutex;
+
+ enum { LOW_POWER, BETWEEN, HIGH_POWER } mode;
+ unsigned int interactive;
+
+ u8 up_threshold; /* Current %busy required to uplock */
+ u8 down_threshold; /* Current %busy required to downclock */
+ } power;
bool enabled;
atomic_t num_waiters;
extern bool ironlake_set_drps(struct drm_i915_private *dev_priv, u8 val);
extern void intel_init_pch_refclk(struct drm_i915_private *dev_priv);
extern int intel_set_rps(struct drm_i915_private *dev_priv, u8 val);
+extern void intel_rps_mark_interactive(struct drm_i915_private *i915,
+ bool interactive);
extern bool intel_set_memory_cxsr(struct drm_i915_private *dev_priv,
bool enable);
c0 = max(render, media);
c0 *= 1000 * 100 << 8; /* to usecs and scale to threshold% */
- if (c0 > time * rps->up_threshold)
+ if (c0 > time * rps->power.up_threshold)
events = GEN6_PM_RP_UP_THRESHOLD;
- else if (c0 < time * rps->down_threshold)
+ else if (c0 < time * rps->power.down_threshold)
events = GEN6_PM_RP_DOWN_THRESHOLD;
}
add_rps_boost_after_vblank(new_state->crtc, new_state->fence);
}
+ /*
+ * We declare pageflips to be interactive and so merit a small bias
+ * towards upclocking to deliver the frame on time. By only changing
+ * the RPS thresholds to sample more regularly and aim for higher
+ * clocks we can hopefully deliver low power workloads (like kodi)
+ * that are not quite steady state without resorting to forcing
+ * maximum clocks following a vblank miss (see do_rps_boost()).
+ */
+ if (!intel_state->rps_interactive) {
+ intel_rps_mark_interactive(dev_priv, true);
+ intel_state->rps_interactive = true;
+ }
+
return 0;
}
intel_cleanup_plane_fb(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
+ struct intel_atomic_state *intel_state =
+ to_intel_atomic_state(old_state->state);
struct drm_i915_private *dev_priv = to_i915(plane->dev);
+ if (intel_state->rps_interactive) {
+ intel_rps_mark_interactive(dev_priv, false);
+ intel_state->rps_interactive = false;
+ }
+
/* Should only be called after a successful intel_prepare_plane_fb()! */
mutex_lock(&dev_priv->drm.struct_mutex);
intel_plane_unpin_fb(to_intel_plane_state(old_state));
*/
bool skip_intermediate_wm;
+ bool rps_interactive;
+
/* Gen9+ only */
struct skl_ddb_values wm_results;
return limits;
}
-static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
+static void rps_set_power(struct drm_i915_private *dev_priv, int new_power)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
- int new_power;
u32 threshold_up = 0, threshold_down = 0; /* in % */
u32 ei_up = 0, ei_down = 0;
- new_power = rps->power;
- switch (rps->power) {
- case LOW_POWER:
- if (val > rps->efficient_freq + 1 &&
- val > rps->cur_freq)
- new_power = BETWEEN;
- break;
-
- case BETWEEN:
- if (val <= rps->efficient_freq &&
- val < rps->cur_freq)
- new_power = LOW_POWER;
- else if (val >= rps->rp0_freq &&
- val > rps->cur_freq)
- new_power = HIGH_POWER;
- break;
+ lockdep_assert_held(&rps->power.mutex);
- case HIGH_POWER:
- if (val < (rps->rp1_freq + rps->rp0_freq) >> 1 &&
- val < rps->cur_freq)
- new_power = BETWEEN;
- break;
- }
- /* Max/min bins are special */
- if (val <= rps->min_freq_softlimit)
- new_power = LOW_POWER;
- if (val >= rps->max_freq_softlimit)
- new_power = HIGH_POWER;
- if (new_power == rps->power)
+ if (new_power == rps->power.mode)
return;
/* Note the units here are not exactly 1us, but 1280ns. */
GEN6_RP_DOWN_IDLE_AVG);
skip_hw_write:
- rps->power = new_power;
- rps->up_threshold = threshold_up;
- rps->down_threshold = threshold_down;
+ rps->power.mode = new_power;
+ rps->power.up_threshold = threshold_up;
+ rps->power.down_threshold = threshold_down;
+}
+
+static void gen6_set_rps_thresholds(struct drm_i915_private *dev_priv, u8 val)
+{
+ struct intel_rps *rps = &dev_priv->gt_pm.rps;
+ int new_power;
+
+ new_power = rps->power.mode;
+ switch (rps->power.mode) {
+ case LOW_POWER:
+ if (val > rps->efficient_freq + 1 &&
+ val > rps->cur_freq)
+ new_power = BETWEEN;
+ break;
+
+ case BETWEEN:
+ if (val <= rps->efficient_freq &&
+ val < rps->cur_freq)
+ new_power = LOW_POWER;
+ else if (val >= rps->rp0_freq &&
+ val > rps->cur_freq)
+ new_power = HIGH_POWER;
+ break;
+
+ case HIGH_POWER:
+ if (val < (rps->rp1_freq + rps->rp0_freq) >> 1 &&
+ val < rps->cur_freq)
+ new_power = BETWEEN;
+ break;
+ }
+ /* Max/min bins are special */
+ if (val <= rps->min_freq_softlimit)
+ new_power = LOW_POWER;
+ if (val >= rps->max_freq_softlimit)
+ new_power = HIGH_POWER;
+
+ mutex_lock(&rps->power.mutex);
+ if (rps->power.interactive)
+ new_power = HIGH_POWER;
+ rps_set_power(dev_priv, new_power);
+ mutex_unlock(&rps->power.mutex);
rps->last_adj = 0;
}
+void intel_rps_mark_interactive(struct drm_i915_private *i915, bool interactive)
+{
+ struct intel_rps *rps = &i915->gt_pm.rps;
+
+ if (INTEL_GEN(i915) < 6)
+ return;
+
+ mutex_lock(&rps->power.mutex);
+ if (interactive) {
+ if (!rps->power.interactive++ && READ_ONCE(i915->gt.awake))
+ rps_set_power(i915, HIGH_POWER);
+ } else {
+ GEM_BUG_ON(!rps->power.interactive);
+ rps->power.interactive--;
+ }
+ mutex_unlock(&rps->power.mutex);
+}
+
static u32 gen6_rps_pm_mask(struct drm_i915_private *dev_priv, u8 val)
{
struct intel_rps *rps = &dev_priv->gt_pm.rps;
u8 freq = rps->cur_freq;
/* force a reset */
- rps->power = -1;
+ rps->power.mode = -1;
rps->cur_freq = -1;
if (set(dev_priv, freq))
void intel_pm_setup(struct drm_i915_private *dev_priv)
{
mutex_init(&dev_priv->pcu_lock);
+ mutex_init(&dev_priv->gt_pm.rps.power.mutex);
atomic_set(&dev_priv->gt_pm.rps.num_waiters, 0);
projects / mirror_ubuntu-focal-kernel.git / commitdiff