}
}
-static void skylake_update_primary_plane(struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int x, int y)
+u32 skl_plane_ctl_format(uint32_t pixel_format)
{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct drm_i915_gem_object *obj;
- int pipe = intel_crtc->pipe;
- u32 plane_ctl, stride_div, stride;
- u32 tile_height, plane_offset, plane_size;
- unsigned int rotation;
- int x_offset, y_offset;
- unsigned long surf_addr;
- struct drm_plane *plane;
-
- if (!intel_crtc->primary_enabled) {
- I915_WRITE(PLANE_CTL(pipe, 0), 0);
- I915_WRITE(PLANE_SURF(pipe, 0), 0);
- POSTING_READ(PLANE_CTL(pipe, 0));
- return;
- }
-
- plane_ctl = PLANE_CTL_ENABLE |
- PLANE_CTL_PIPE_GAMMA_ENABLE |
- PLANE_CTL_PIPE_CSC_ENABLE;
-
- switch (fb->pixel_format) {
+ u32 plane_ctl_format = 0;
+ switch (pixel_format) {
case DRM_FORMAT_RGB565:
- plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
- break;
- case DRM_FORMAT_XRGB8888:
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
- break;
- case DRM_FORMAT_ARGB8888:
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
- plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+ plane_ctl_format = PLANE_CTL_FORMAT_RGB_565;
break;
case DRM_FORMAT_XBGR8888:
- plane_ctl |= PLANE_CTL_ORDER_RGBX;
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
+ plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
break;
+ case DRM_FORMAT_XRGB8888:
+ plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888;
+ break;
+ /*
+ * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
+ * to be already pre-multiplied. We need to add a knob (or a different
+ * DRM_FORMAT) for user-space to configure that.
+ */
case DRM_FORMAT_ABGR8888:
- plane_ctl |= PLANE_CTL_ORDER_RGBX;
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
- plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+ plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX |
+ PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+ break;
+ case DRM_FORMAT_ARGB8888:
+ plane_ctl_format = PLANE_CTL_FORMAT_XRGB_8888 |
+ PLANE_CTL_ALPHA_SW_PREMULTIPLY;
break;
case DRM_FORMAT_XRGB2101010:
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
+ plane_ctl_format = PLANE_CTL_FORMAT_XRGB_2101010;
break;
case DRM_FORMAT_XBGR2101010:
- plane_ctl |= PLANE_CTL_ORDER_RGBX;
- plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
+ plane_ctl_format = PLANE_CTL_ORDER_RGBX | PLANE_CTL_FORMAT_XRGB_2101010;
+ break;
+ case DRM_FORMAT_YUYV:
+ plane_ctl_format = PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
+ break;
+ case DRM_FORMAT_YVYU:
+ plane_ctl_format = PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
+ break;
+ case DRM_FORMAT_UYVY:
+ plane_ctl_format = PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
+ break;
+ case DRM_FORMAT_VYUY:
+ plane_ctl_format = PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
break;
default:
BUG();
}
+ return plane_ctl_format;
+}
- switch (fb->modifier[0]) {
+u32 skl_plane_ctl_tiling(uint64_t fb_modifier)
+{
+ u32 plane_ctl_tiling = 0;
+ switch (fb_modifier) {
case DRM_FORMAT_MOD_NONE:
break;
case I915_FORMAT_MOD_X_TILED:
- plane_ctl |= PLANE_CTL_TILED_X;
+ plane_ctl_tiling = PLANE_CTL_TILED_X;
break;
case I915_FORMAT_MOD_Y_TILED:
- plane_ctl |= PLANE_CTL_TILED_Y;
+ plane_ctl_tiling = PLANE_CTL_TILED_Y;
break;
case I915_FORMAT_MOD_Yf_TILED:
- plane_ctl |= PLANE_CTL_TILED_YF;
+ plane_ctl_tiling = PLANE_CTL_TILED_YF;
break;
default:
- MISSING_CASE(fb->modifier[0]);
+ MISSING_CASE(fb_modifier);
}
+ return plane_ctl_tiling;
+}
- plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
-
- plane = crtc->primary;
- rotation = plane->state->rotation;
+u32 skl_plane_ctl_rotation(unsigned int rotation)
+{
+ u32 plane_ctl_rotation = 0;
switch (rotation) {
+ case BIT(DRM_ROTATE_0):
+ break;
case BIT(DRM_ROTATE_90):
- plane_ctl |= PLANE_CTL_ROTATE_90;
+ plane_ctl_rotation = PLANE_CTL_ROTATE_90;
break;
-
case BIT(DRM_ROTATE_180):
- plane_ctl |= PLANE_CTL_ROTATE_180;
+ plane_ctl_rotation = PLANE_CTL_ROTATE_180;
break;
-
case BIT(DRM_ROTATE_270):
- plane_ctl |= PLANE_CTL_ROTATE_270;
+ plane_ctl_rotation = PLANE_CTL_ROTATE_270;
break;
+ default:
+ MISSING_CASE(rotation);
+ }
+
+ return plane_ctl_rotation;
+}
+
+static void skylake_update_primary_plane(struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ int x, int y)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct drm_i915_gem_object *obj;
+ int pipe = intel_crtc->pipe;
+ u32 plane_ctl, stride_div, stride;
+ u32 tile_height, plane_offset, plane_size;
+ unsigned int rotation;
+ int x_offset, y_offset;
+ unsigned long surf_addr;
+ struct drm_plane *plane;
+ struct intel_crtc_state *crtc_state = intel_crtc->config;
+ struct intel_plane_state *plane_state;
+ int src_x = 0, src_y = 0, src_w = 0, src_h = 0;
+ int dst_x = 0, dst_y = 0, dst_w = 0, dst_h = 0;
+ int scaler_id = -1;
+
+ plane = crtc->primary;
+ plane_state = to_intel_plane_state(plane->state);
+
+ if (!intel_crtc->primary_enabled) {
+ I915_WRITE(PLANE_CTL(pipe, 0), 0);
+ I915_WRITE(PLANE_SURF(pipe, 0), 0);
+ POSTING_READ(PLANE_CTL(pipe, 0));
+ return;
}
+ plane_ctl = PLANE_CTL_ENABLE |
+ PLANE_CTL_PIPE_GAMMA_ENABLE |
+ PLANE_CTL_PIPE_CSC_ENABLE;
+
+ plane_ctl |= skl_plane_ctl_format(fb->pixel_format);
+ plane_ctl |= skl_plane_ctl_tiling(fb->modifier[0]);
+ plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
+
+ rotation = plane->state->rotation;
+ plane_ctl |= skl_plane_ctl_rotation(rotation);
+
obj = intel_fb_obj(fb);
stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
fb->pixel_format);
surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj);
+ /*
+ * FIXME: intel_plane_state->src, dst aren't set when transitional
+ * update_plane helpers are called from legacy paths.
+ * Once full atomic crtc is available, below check can be avoided.
+ */
+ if (drm_rect_width(&plane_state->src)) {
+ scaler_id = plane_state->scaler_id;
+ src_x = plane_state->src.x1 >> 16;
+ src_y = plane_state->src.y1 >> 16;
+ src_w = drm_rect_width(&plane_state->src) >> 16;
+ src_h = drm_rect_height(&plane_state->src) >> 16;
+ dst_x = plane_state->dst.x1;
+ dst_y = plane_state->dst.y1;
+ dst_w = drm_rect_width(&plane_state->dst);
+ dst_h = drm_rect_height(&plane_state->dst);
+
+ WARN_ON(x != src_x || y != src_y);
+ } else {
+ src_w = intel_crtc->config->pipe_src_w;
+ src_h = intel_crtc->config->pipe_src_h;
+ }
+
if (intel_rotation_90_or_270(rotation)) {
/* stride = Surface height in tiles */
tile_height = intel_tile_height(dev, fb->bits_per_pixel,
fb->modifier[0]);
stride = DIV_ROUND_UP(fb->height, tile_height);
- x_offset = stride * tile_height - y - (plane->state->src_h >> 16);
+ x_offset = stride * tile_height - y - src_h;
y_offset = x;
- plane_size = ((plane->state->src_w >> 16) - 1) << 16 |
- ((plane->state->src_h >> 16) - 1);
+ plane_size = (src_w - 1) << 16 | (src_h - 1);
} else {
stride = fb->pitches[0] / stride_div;
x_offset = x;
y_offset = y;
- plane_size = ((plane->state->src_h >> 16) - 1) << 16 |
- ((plane->state->src_w >> 16) - 1);
+ plane_size = (src_h - 1) << 16 | (src_w - 1);
}
plane_offset = y_offset << 16 | x_offset;
I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
- I915_WRITE(PLANE_POS(pipe, 0), 0);
I915_WRITE(PLANE_OFFSET(pipe, 0), plane_offset);
I915_WRITE(PLANE_SIZE(pipe, 0), plane_size);
I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
+
+ if (scaler_id >= 0) {
+ uint32_t ps_ctrl = 0;
+
+ WARN_ON(!dst_w || !dst_h);
+ ps_ctrl = PS_SCALER_EN | PS_PLANE_SEL(0) |
+ crtc_state->scaler_state.scalers[scaler_id].mode;
+ I915_WRITE(SKL_PS_CTRL(pipe, scaler_id), ps_ctrl);
+ I915_WRITE(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
+ I915_WRITE(SKL_PS_WIN_POS(pipe, scaler_id), (dst_x << 16) | dst_y);
+ I915_WRITE(SKL_PS_WIN_SZ(pipe, scaler_id), (dst_w << 16) | dst_h);
+ I915_WRITE(PLANE_POS(pipe, 0), 0);
+ } else {
+ I915_WRITE(PLANE_POS(pipe, 0), (dst_y << 16) | dst_x);
+ }
+
I915_WRITE(PLANE_SURF(pipe, 0), surf_addr);
POSTING_READ(PLANE_SURF(pipe, 0));
int *scaler_id;
struct drm_framebuffer *fb;
struct intel_crtc_scaler_state *scaler_state;
+ unsigned int rotation;
if (!intel_crtc || !crtc_state)
return 0;
dst_w = drm_rect_width(&plane_state->dst);
dst_h = drm_rect_height(&plane_state->dst);
scaler_id = &plane_state->scaler_id;
+ rotation = plane_state->base.rotation;
} else {
struct drm_display_mode *adjusted_mode =
&crtc_state->base.adjusted_mode;
dst_w = adjusted_mode->hdisplay;
dst_h = adjusted_mode->vdisplay;
scaler_id = &scaler_state->scaler_id;
+ rotation = DRM_ROTATE_0;
}
- need_scaling = (src_w != dst_w || src_h != dst_h);
+
+ need_scaling = intel_rotation_90_or_270(rotation) ?
+ (src_h != dst_w || src_w != dst_h):
+ (src_w != dst_w || src_h != dst_h);
/*
* if plane is being disabled or scaler is no more required or force detach
}
}
+int
+skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
+{
+ int max_scale;
+ struct drm_device *dev;
+ struct drm_i915_private *dev_priv;
+ int crtc_clock, cdclk;
+
+ if (!intel_crtc || !crtc_state)
+ return DRM_PLANE_HELPER_NO_SCALING;
+
+ dev = intel_crtc->base.dev;
+ dev_priv = dev->dev_private;
+ crtc_clock = crtc_state->base.adjusted_mode.crtc_clock;
+ cdclk = dev_priv->display.get_display_clock_speed(dev);
+
+ if (!crtc_clock || !cdclk)
+ return DRM_PLANE_HELPER_NO_SCALING;
+
+ /*
+ * skl max scale is lower of:
+ * close to 3 but not 3, -1 is for that purpose
+ * or
+ * cdclk/crtc_clock
+ */
+ max_scale = min((1 << 16) * 3 - 1, (1 << 8) * ((cdclk << 8) / crtc_clock));
+
+ return max_scale;
+}
+
static int
intel_check_primary_plane(struct drm_plane *plane,
struct intel_plane_state *state)
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = state->base.crtc;
struct intel_crtc *intel_crtc;
+ struct intel_crtc_state *crtc_state;
struct drm_framebuffer *fb = state->base.fb;
struct drm_rect *dest = &state->dst;
struct drm_rect *src = &state->src;
const struct drm_rect *clip = &state->clip;
bool can_position = false;
+ int max_scale = DRM_PLANE_HELPER_NO_SCALING;
+ int min_scale = DRM_PLANE_HELPER_NO_SCALING;
int ret;
crtc = crtc ? crtc : plane->crtc;
intel_crtc = to_intel_crtc(crtc);
+ crtc_state = state->base.state ?
+ intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL;
- if (INTEL_INFO(dev)->gen >= 9)
+ if (INTEL_INFO(dev)->gen >= 9) {
+ min_scale = 1;
+ max_scale = skl_max_scale(intel_crtc, crtc_state);
can_position = true;
+ }
ret = drm_plane_helper_check_update(plane, crtc, fb,
src, dest, clip,
- DRM_PLANE_HELPER_NO_SCALING,
- DRM_PLANE_HELPER_NO_SCALING,
+ min_scale,
+ max_scale,
can_position, true,
&state->visible);
if (ret)
intel_crtc->atomic.update_wm = true;
}
+ if (INTEL_INFO(dev)->gen >= 9) {
+ ret = skl_update_scaler_users(intel_crtc, crtc_state,
+ to_intel_plane(plane), state, 0);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
primary->can_scale = false;
primary->max_downscale = 1;
+ if (INTEL_INFO(dev)->gen >= 9) {
+ primary->can_scale = true;
+ }
state->scaler_id = -1;
primary->pipe = pipe;
primary->plane = pipe;
projects / mirror_ubuntu-jammy-kernel.git / commitdiff