There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).
Enabling qca,ar71xx causes a warning, so let's fix the node names:
Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
From schema: schemas/phy/phy-provider.yaml
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: ChiYuan Huang <cy_huang@richtek.com>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Dilip Kota <eswara.kota@linux.intel.com>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Olivier Moysan <olivier.moysan@st.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> # For media
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20210720172025.363238-1-robh@kernel.org
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
- status = "disabled";
ports {
#address-cells = <1>;
phy-names = "phy";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
- status = "disabled";
ports {
#address-cells = <1>;
avee-supply = <&ppvarp_lcd>;
pp1800-supply = <&pp1800_lcd>;
backlight = <&backlight_lcd0>;
- status = "okay";
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
clock-names = "pclk", "wrap", "phy", "axi";
power-domains = <&mipi_pd>;
- status = "disabled";
-
ports {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 513>;
renesas,bonding = <&drif11>;
- status = "disabled";
};
drif11: rif@e6f70000 {
snps,mtl-rx-config = <&mtl_rx_setup>;
snps,mtl-tx-config = <&mtl_tx_setup>;
snps,tso;
- status = "okay";
mdio0 {
#address-cells = <1>;
ethernet@c8009000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc8009000 0x1000>;
- status = "disabled";
queue-rx = <&qmgr 4>;
queue-txready = <&qmgr 21>;
intel,npe-handle = <&npe 1>;
ethernet@c800c000 {
compatible = "intel,ixp4xx-ethernet";
reg = <0xc800c000 0x1000>;
- status = "disabled";
queue-rx = <&qmgr 3>;
queue-txready = <&qmgr 20>;
intel,npe-handle = <&npe 2>;
# UART example on Raspberry Pi
- |
uart0 {
- status = "okay";
-
nfc {
compatible = "samsung,s3fwrn82";
en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- status = "okay";
};
};
phy-mode = "gmii";
- status = "disabled";
-
fixed-link {
speed = <1000>;
full-duplex;
reg = <0x1>;
phy-handle = <&phy_port0>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port2: port@2 {
reg = <0x2>;
phy-handle = <&phy_port1>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port3: port@3 {
reg = <0x3>;
phy-handle = <&phy_port2>;
phy-mode = "internal";
-
- status = "disabled";
};
switch_port4: port@4 {
reg = <0x4>;
phy-handle = <&phy_port3>;
phy-mode = "internal";
-
- status = "disabled";
};
};
interrupt-parent = <&switch10>;
- phy_port0: phy@0 {
+ phy_port0: ethernet-phy@0 {
reg = <0x0>;
interrupts = <0>;
- status = "disabled";
};
- phy_port1: phy@1 {
+ phy_port1: ethernet-phy@1 {
reg = <0x1>;
interrupts = <0>;
- status = "disabled";
};
- phy_port2: phy@2 {
+ phy_port2: ethernet-phy@2 {
reg = <0x2>;
interrupts = <0>;
- status = "disabled";
};
- phy_port3: phy@3 {
+ phy_port3: ethernet-phy@3 {
reg = <0x3>;
interrupts = <0>;
- status = "disabled";
};
- phy_port4: phy@4 {
+ phy_port4: ethernet-phy@4 {
reg = <0x4>;
interrupts = <0>;
- status = "disabled";
};
};
};
rt6245@34 {
compatible = "richtek,rt6245";
- status = "okay";
reg = <0x34>;
enable-gpios = <&gpio26 2 0>;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
- status = "disabled";
};
...
resets = <&iomcu_rst 0x20 3>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
- status = "disabled";
};
...
};
pwm: pwm@e0d00000 {
- status = "disabled";
compatible = "intel,lgm-pwm";
reg = <0xe0d00000 0x30>;
clocks = <&cgu0 1>;
rtc@51 {
compatible = "microcrystal,rv3032";
reg = <0x51>;
- status = "okay";
pinctrl-0 = <&rtc_nint_pins>;
interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
trickle-resistor-ohms = <7000>;
soc_ctrl0: soc-controller@f0000000 {
compatible = "litex,soc-controller";
reg = <0xf0000000 0xc>;
- status = "okay";
};
...
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
- status = "okay";
sai2a: audio-controller@4400b004 {
#sound-dai-cells = <0>;
dma-names = "tx";
clocks = <&rcc SAI2_K>;
clock-names = "sai_ck";
- status = "okay";
};
};
compatible = "ti,j721e-cpb-audio";
model = "j721e-cpb";
- status = "okay";
-
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
compatible = "ti,j721e-cpb-ivi-audio";
model = "j721e-cpb-ivi";
- status = "okay";
-
ti,cpb-mcasp = <&mcasp10>;
ti,cpb-codec = <&pcm3168a_1>;
projects / mirror_ubuntu-jammy-kernel.git / commitdiff